2010-05-18 13:35:12 +07:00
|
|
|
/*
|
|
|
|
* apei-base.c - ACPI Platform Error Interface (APEI) supporting
|
|
|
|
* infrastructure
|
|
|
|
*
|
|
|
|
* APEI allows to report errors (for example from the chipset) to the
|
|
|
|
* the operating system. This improves NMI handling especially. In
|
|
|
|
* addition it supports error serialization and error injection.
|
|
|
|
*
|
|
|
|
* For more information about APEI, please refer to ACPI Specification
|
|
|
|
* version 4.0, chapter 17.
|
|
|
|
*
|
|
|
|
* This file has Common functions used by more than one APEI table,
|
|
|
|
* including framework of interpreter for ERST and EINJ; resource
|
|
|
|
* management for APEI registers.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2009, Intel Corp.
|
|
|
|
* Author: Huang Ying <ying.huang@intel.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License version
|
|
|
|
* 2 as published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/acpi.h>
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
#include <linux/acpi_io.h>
|
2010-03-30 00:52:44 +07:00
|
|
|
#include <linux/slab.h>
|
2010-05-18 13:35:12 +07:00
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/kref.h>
|
|
|
|
#include <linux/rculist.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/debugfs.h>
|
|
|
|
|
|
|
|
#include "apei-internal.h"
|
|
|
|
|
|
|
|
#define APEI_PFX "APEI: "
|
|
|
|
|
|
|
|
/*
|
|
|
|
* APEI ERST (Error Record Serialization Table) and EINJ (Error
|
|
|
|
* INJection) interpreter framework.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define APEI_EXEC_PRESERVE_REGISTER 0x1
|
|
|
|
|
|
|
|
void apei_exec_ctx_init(struct apei_exec_context *ctx,
|
|
|
|
struct apei_exec_ins_type *ins_table,
|
|
|
|
u32 instructions,
|
|
|
|
struct acpi_whea_header *action_table,
|
|
|
|
u32 entries)
|
|
|
|
{
|
|
|
|
ctx->ins_table = ins_table;
|
|
|
|
ctx->instructions = instructions;
|
|
|
|
ctx->action_table = action_table;
|
|
|
|
ctx->entries = entries;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_exec_ctx_init);
|
|
|
|
|
|
|
|
int __apei_exec_read_register(struct acpi_whea_header *entry, u64 *val)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
rc = apei_read(val, &entry->register_region);
|
2010-05-18 13:35:12 +07:00
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
*val >>= entry->register_region.bit_offset;
|
|
|
|
*val &= entry->mask;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int apei_exec_read_register(struct apei_exec_context *ctx,
|
|
|
|
struct acpi_whea_header *entry)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
u64 val = 0;
|
|
|
|
|
|
|
|
rc = __apei_exec_read_register(entry, &val);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
ctx->value = val;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_exec_read_register);
|
|
|
|
|
|
|
|
int apei_exec_read_register_value(struct apei_exec_context *ctx,
|
|
|
|
struct acpi_whea_header *entry)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = apei_exec_read_register(ctx, entry);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
ctx->value = (ctx->value == entry->value);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_exec_read_register_value);
|
|
|
|
|
|
|
|
int __apei_exec_write_register(struct acpi_whea_header *entry, u64 val)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
val &= entry->mask;
|
|
|
|
val <<= entry->register_region.bit_offset;
|
|
|
|
if (entry->flags & APEI_EXEC_PRESERVE_REGISTER) {
|
|
|
|
u64 valr = 0;
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
rc = apei_read(&valr, &entry->register_region);
|
2010-05-18 13:35:12 +07:00
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
valr &= ~(entry->mask << entry->register_region.bit_offset);
|
|
|
|
val |= valr;
|
|
|
|
}
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
rc = apei_write(val, &entry->register_region);
|
2010-05-18 13:35:12 +07:00
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
int apei_exec_write_register(struct apei_exec_context *ctx,
|
|
|
|
struct acpi_whea_header *entry)
|
|
|
|
{
|
|
|
|
return __apei_exec_write_register(entry, ctx->value);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_exec_write_register);
|
|
|
|
|
|
|
|
int apei_exec_write_register_value(struct apei_exec_context *ctx,
|
|
|
|
struct acpi_whea_header *entry)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
ctx->value = entry->value;
|
|
|
|
rc = apei_exec_write_register(ctx, entry);
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_exec_write_register_value);
|
|
|
|
|
|
|
|
int apei_exec_noop(struct apei_exec_context *ctx,
|
|
|
|
struct acpi_whea_header *entry)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_exec_noop);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Interpret the specified action. Go through whole action table,
|
|
|
|
* execute all instructions belong to the action.
|
|
|
|
*/
|
ACPI, APEI, Add apei_exec_run_optional
Some actions in APEI ERST and EINJ tables are optional, for example,
ACPI_EINJ_BEGIN_OPERATION action is used to do some preparation for
error injection, and firmware may choose to do nothing here. While
some other actions are mandatory, for example, firmware must provide
ACPI_EINJ_GET_ERROR_TYPE implementation.
Original implementation treats all actions as optional (that is, can
have no instructions), that may cause issue if firmware does not
provide some mandatory actions. To fix this, this patch adds
apei_exec_run_optional, which should be used for optional actions.
The original apei_exec_run should be used for mandatory actions.
Cc: Thomas Renninger <trenn@novell.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 12:14:16 +07:00
|
|
|
int __apei_exec_run(struct apei_exec_context *ctx, u8 action,
|
|
|
|
bool optional)
|
2010-05-18 13:35:12 +07:00
|
|
|
{
|
ACPI, APEI, Add apei_exec_run_optional
Some actions in APEI ERST and EINJ tables are optional, for example,
ACPI_EINJ_BEGIN_OPERATION action is used to do some preparation for
error injection, and firmware may choose to do nothing here. While
some other actions are mandatory, for example, firmware must provide
ACPI_EINJ_GET_ERROR_TYPE implementation.
Original implementation treats all actions as optional (that is, can
have no instructions), that may cause issue if firmware does not
provide some mandatory actions. To fix this, this patch adds
apei_exec_run_optional, which should be used for optional actions.
The original apei_exec_run should be used for mandatory actions.
Cc: Thomas Renninger <trenn@novell.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 12:14:16 +07:00
|
|
|
int rc = -ENOENT;
|
2010-05-18 13:35:12 +07:00
|
|
|
u32 i, ip;
|
|
|
|
struct acpi_whea_header *entry;
|
|
|
|
apei_exec_ins_func_t run;
|
|
|
|
|
|
|
|
ctx->ip = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* "ip" is the instruction pointer of current instruction,
|
|
|
|
* "ctx->ip" specifies the next instruction to executed,
|
|
|
|
* instruction "run" function may change the "ctx->ip" to
|
|
|
|
* implement "goto" semantics.
|
|
|
|
*/
|
|
|
|
rewind:
|
|
|
|
ip = 0;
|
|
|
|
for (i = 0; i < ctx->entries; i++) {
|
|
|
|
entry = &ctx->action_table[i];
|
|
|
|
if (entry->action != action)
|
|
|
|
continue;
|
|
|
|
if (ip == ctx->ip) {
|
|
|
|
if (entry->instruction >= ctx->instructions ||
|
|
|
|
!ctx->ins_table[entry->instruction].run) {
|
|
|
|
pr_warning(FW_WARN APEI_PFX
|
|
|
|
"Invalid action table, unknown instruction type: %d\n",
|
|
|
|
entry->instruction);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
run = ctx->ins_table[entry->instruction].run;
|
|
|
|
rc = run(ctx, entry);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
else if (rc != APEI_EXEC_SET_IP)
|
|
|
|
ctx->ip++;
|
|
|
|
}
|
|
|
|
ip++;
|
|
|
|
if (ctx->ip < ip)
|
|
|
|
goto rewind;
|
|
|
|
}
|
|
|
|
|
ACPI, APEI, Add apei_exec_run_optional
Some actions in APEI ERST and EINJ tables are optional, for example,
ACPI_EINJ_BEGIN_OPERATION action is used to do some preparation for
error injection, and firmware may choose to do nothing here. While
some other actions are mandatory, for example, firmware must provide
ACPI_EINJ_GET_ERROR_TYPE implementation.
Original implementation treats all actions as optional (that is, can
have no instructions), that may cause issue if firmware does not
provide some mandatory actions. To fix this, this patch adds
apei_exec_run_optional, which should be used for optional actions.
The original apei_exec_run should be used for mandatory actions.
Cc: Thomas Renninger <trenn@novell.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 12:14:16 +07:00
|
|
|
return !optional && rc < 0 ? rc : 0;
|
2010-05-18 13:35:12 +07:00
|
|
|
}
|
ACPI, APEI, Add apei_exec_run_optional
Some actions in APEI ERST and EINJ tables are optional, for example,
ACPI_EINJ_BEGIN_OPERATION action is used to do some preparation for
error injection, and firmware may choose to do nothing here. While
some other actions are mandatory, for example, firmware must provide
ACPI_EINJ_GET_ERROR_TYPE implementation.
Original implementation treats all actions as optional (that is, can
have no instructions), that may cause issue if firmware does not
provide some mandatory actions. To fix this, this patch adds
apei_exec_run_optional, which should be used for optional actions.
The original apei_exec_run should be used for mandatory actions.
Cc: Thomas Renninger <trenn@novell.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 12:14:16 +07:00
|
|
|
EXPORT_SYMBOL_GPL(__apei_exec_run);
|
2010-05-18 13:35:12 +07:00
|
|
|
|
|
|
|
typedef int (*apei_exec_entry_func_t)(struct apei_exec_context *ctx,
|
|
|
|
struct acpi_whea_header *entry,
|
|
|
|
void *data);
|
|
|
|
|
|
|
|
static int apei_exec_for_each_entry(struct apei_exec_context *ctx,
|
|
|
|
apei_exec_entry_func_t func,
|
|
|
|
void *data,
|
|
|
|
int *end)
|
|
|
|
{
|
|
|
|
u8 ins;
|
|
|
|
int i, rc;
|
|
|
|
struct acpi_whea_header *entry;
|
|
|
|
struct apei_exec_ins_type *ins_table = ctx->ins_table;
|
|
|
|
|
|
|
|
for (i = 0; i < ctx->entries; i++) {
|
|
|
|
entry = ctx->action_table + i;
|
|
|
|
ins = entry->instruction;
|
|
|
|
if (end)
|
|
|
|
*end = i;
|
|
|
|
if (ins >= ctx->instructions || !ins_table[ins].run) {
|
|
|
|
pr_warning(FW_WARN APEI_PFX
|
|
|
|
"Invalid action table, unknown instruction type: %d\n",
|
|
|
|
ins);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
rc = func(ctx, entry, data);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pre_map_gar_callback(struct apei_exec_context *ctx,
|
|
|
|
struct acpi_whea_header *entry,
|
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
u8 ins = entry->instruction;
|
|
|
|
|
|
|
|
if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
|
2012-06-12 10:20:19 +07:00
|
|
|
return apei_map_generic_address(&entry->register_region);
|
2010-05-18 13:35:12 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Pre-map all GARs in action table to make it possible to access them
|
|
|
|
* in NMI handler.
|
|
|
|
*/
|
|
|
|
int apei_exec_pre_map_gars(struct apei_exec_context *ctx)
|
|
|
|
{
|
|
|
|
int rc, end;
|
|
|
|
|
|
|
|
rc = apei_exec_for_each_entry(ctx, pre_map_gar_callback,
|
|
|
|
NULL, &end);
|
|
|
|
if (rc) {
|
|
|
|
struct apei_exec_context ctx_unmap;
|
|
|
|
memcpy(&ctx_unmap, ctx, sizeof(*ctx));
|
|
|
|
ctx_unmap.entries = end;
|
|
|
|
apei_exec_post_unmap_gars(&ctx_unmap);
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_exec_pre_map_gars);
|
|
|
|
|
|
|
|
static int post_unmap_gar_callback(struct apei_exec_context *ctx,
|
|
|
|
struct acpi_whea_header *entry,
|
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
u8 ins = entry->instruction;
|
|
|
|
|
|
|
|
if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
|
2012-06-12 10:20:19 +07:00
|
|
|
apei_unmap_generic_address(&entry->register_region);
|
2010-05-18 13:35:12 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Post-unmap all GAR in action table. */
|
|
|
|
int apei_exec_post_unmap_gars(struct apei_exec_context *ctx)
|
|
|
|
{
|
|
|
|
return apei_exec_for_each_entry(ctx, post_unmap_gar_callback,
|
|
|
|
NULL, NULL);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_exec_post_unmap_gars);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Resource management for GARs in APEI
|
|
|
|
*/
|
|
|
|
struct apei_res {
|
|
|
|
struct list_head list;
|
|
|
|
unsigned long start;
|
|
|
|
unsigned long end;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Collect all resources requested, to avoid conflict */
|
|
|
|
struct apei_resources apei_resources_all = {
|
|
|
|
.iomem = LIST_HEAD_INIT(apei_resources_all.iomem),
|
|
|
|
.ioport = LIST_HEAD_INIT(apei_resources_all.ioport),
|
|
|
|
};
|
|
|
|
|
|
|
|
static int apei_res_add(struct list_head *res_list,
|
|
|
|
unsigned long start, unsigned long size)
|
|
|
|
{
|
|
|
|
struct apei_res *res, *resn, *res_ins = NULL;
|
|
|
|
unsigned long end = start + size;
|
|
|
|
|
|
|
|
if (end <= start)
|
|
|
|
return 0;
|
|
|
|
repeat:
|
|
|
|
list_for_each_entry_safe(res, resn, res_list, list) {
|
|
|
|
if (res->start > end || res->end < start)
|
|
|
|
continue;
|
|
|
|
else if (end <= res->end && start >= res->start) {
|
|
|
|
kfree(res_ins);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
list_del(&res->list);
|
|
|
|
res->start = start = min(res->start, start);
|
|
|
|
res->end = end = max(res->end, end);
|
|
|
|
kfree(res_ins);
|
|
|
|
res_ins = res;
|
|
|
|
goto repeat;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (res_ins)
|
|
|
|
list_add(&res_ins->list, res_list);
|
|
|
|
else {
|
|
|
|
res_ins = kmalloc(sizeof(*res), GFP_KERNEL);
|
|
|
|
if (!res_ins)
|
|
|
|
return -ENOMEM;
|
|
|
|
res_ins->start = start;
|
|
|
|
res_ins->end = end;
|
|
|
|
list_add(&res_ins->list, res_list);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int apei_res_sub(struct list_head *res_list1,
|
|
|
|
struct list_head *res_list2)
|
|
|
|
{
|
|
|
|
struct apei_res *res1, *resn1, *res2, *res;
|
|
|
|
res1 = list_entry(res_list1->next, struct apei_res, list);
|
|
|
|
resn1 = list_entry(res1->list.next, struct apei_res, list);
|
|
|
|
while (&res1->list != res_list1) {
|
|
|
|
list_for_each_entry(res2, res_list2, list) {
|
|
|
|
if (res1->start >= res2->end ||
|
|
|
|
res1->end <= res2->start)
|
|
|
|
continue;
|
|
|
|
else if (res1->end <= res2->end &&
|
|
|
|
res1->start >= res2->start) {
|
|
|
|
list_del(&res1->list);
|
|
|
|
kfree(res1);
|
|
|
|
break;
|
|
|
|
} else if (res1->end > res2->end &&
|
|
|
|
res1->start < res2->start) {
|
|
|
|
res = kmalloc(sizeof(*res), GFP_KERNEL);
|
|
|
|
if (!res)
|
|
|
|
return -ENOMEM;
|
|
|
|
res->start = res2->end;
|
|
|
|
res->end = res1->end;
|
|
|
|
res1->end = res2->start;
|
|
|
|
list_add(&res->list, &res1->list);
|
|
|
|
resn1 = res;
|
|
|
|
} else {
|
|
|
|
if (res1->start < res2->start)
|
|
|
|
res1->end = res2->start;
|
|
|
|
else
|
|
|
|
res1->start = res2->end;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
res1 = resn1;
|
|
|
|
resn1 = list_entry(resn1->list.next, struct apei_res, list);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void apei_res_clean(struct list_head *res_list)
|
|
|
|
{
|
|
|
|
struct apei_res *res, *resn;
|
|
|
|
|
|
|
|
list_for_each_entry_safe(res, resn, res_list, list) {
|
|
|
|
list_del(&res->list);
|
|
|
|
kfree(res);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void apei_resources_fini(struct apei_resources *resources)
|
|
|
|
{
|
|
|
|
apei_res_clean(&resources->iomem);
|
|
|
|
apei_res_clean(&resources->ioport);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_resources_fini);
|
|
|
|
|
|
|
|
static int apei_resources_merge(struct apei_resources *resources1,
|
|
|
|
struct apei_resources *resources2)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
struct apei_res *res;
|
|
|
|
|
|
|
|
list_for_each_entry(res, &resources2->iomem, list) {
|
|
|
|
rc = apei_res_add(&resources1->iomem, res->start,
|
|
|
|
res->end - res->start);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
list_for_each_entry(res, &resources2->ioport, list) {
|
|
|
|
rc = apei_res_add(&resources1->ioport, res->start,
|
|
|
|
res->end - res->start);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-12-08 10:25:47 +07:00
|
|
|
int apei_resources_add(struct apei_resources *resources,
|
|
|
|
unsigned long start, unsigned long size,
|
|
|
|
bool iomem)
|
|
|
|
{
|
|
|
|
if (iomem)
|
|
|
|
return apei_res_add(&resources->iomem, start, size);
|
|
|
|
else
|
|
|
|
return apei_res_add(&resources->ioport, start, size);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_resources_add);
|
|
|
|
|
2010-05-18 13:35:12 +07:00
|
|
|
/*
|
|
|
|
* EINJ has two groups of GARs (EINJ table entry and trigger table
|
|
|
|
* entry), so common resources are subtracted from the trigger table
|
|
|
|
* resources before the second requesting.
|
|
|
|
*/
|
|
|
|
int apei_resources_sub(struct apei_resources *resources1,
|
|
|
|
struct apei_resources *resources2)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = apei_res_sub(&resources1->iomem, &resources2->iomem);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
return apei_res_sub(&resources1->ioport, &resources2->ioport);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_resources_sub);
|
|
|
|
|
2011-12-08 10:25:50 +07:00
|
|
|
static int apei_get_nvs_callback(__u64 start, __u64 size, void *data)
|
|
|
|
{
|
|
|
|
struct apei_resources *resources = data;
|
|
|
|
return apei_res_add(&resources->iomem, start, size);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int apei_get_nvs_resources(struct apei_resources *resources)
|
|
|
|
{
|
|
|
|
return acpi_nvs_for_each_region(apei_get_nvs_callback, resources);
|
|
|
|
}
|
|
|
|
|
2010-05-18 13:35:12 +07:00
|
|
|
/*
|
2011-12-08 10:25:50 +07:00
|
|
|
* IO memory/port resource management mechanism is used to check
|
2010-05-18 13:35:12 +07:00
|
|
|
* whether memory/port area used by GARs conflicts with normal memory
|
|
|
|
* or IO memory/port of devices.
|
|
|
|
*/
|
|
|
|
int apei_resources_request(struct apei_resources *resources,
|
|
|
|
const char *desc)
|
|
|
|
{
|
2010-09-29 18:53:54 +07:00
|
|
|
struct apei_res *res, *res_bak = NULL;
|
2010-05-18 13:35:12 +07:00
|
|
|
struct resource *r;
|
2011-12-08 10:25:50 +07:00
|
|
|
struct apei_resources nvs_resources;
|
2010-09-29 18:53:54 +07:00
|
|
|
int rc;
|
2010-05-18 13:35:12 +07:00
|
|
|
|
2010-09-29 18:53:54 +07:00
|
|
|
rc = apei_resources_sub(resources, &apei_resources_all);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
2010-05-18 13:35:12 +07:00
|
|
|
|
2011-12-08 10:25:50 +07:00
|
|
|
/*
|
|
|
|
* Some firmware uses ACPI NVS region, that has been marked as
|
|
|
|
* busy, so exclude it from APEI resources to avoid false
|
|
|
|
* conflict.
|
|
|
|
*/
|
|
|
|
apei_resources_init(&nvs_resources);
|
|
|
|
rc = apei_get_nvs_resources(&nvs_resources);
|
|
|
|
if (rc)
|
|
|
|
goto res_fini;
|
|
|
|
rc = apei_resources_sub(resources, &nvs_resources);
|
|
|
|
if (rc)
|
|
|
|
goto res_fini;
|
|
|
|
|
2010-09-29 18:53:54 +07:00
|
|
|
rc = -EINVAL;
|
2010-05-18 13:35:12 +07:00
|
|
|
list_for_each_entry(res, &resources->iomem, list) {
|
|
|
|
r = request_mem_region(res->start, res->end - res->start,
|
|
|
|
desc);
|
|
|
|
if (!r) {
|
|
|
|
pr_err(APEI_PFX
|
2011-12-08 10:25:42 +07:00
|
|
|
"Can not request [mem %#010llx-%#010llx] for %s registers\n",
|
2010-05-18 13:35:12 +07:00
|
|
|
(unsigned long long)res->start,
|
2011-12-08 10:25:42 +07:00
|
|
|
(unsigned long long)res->end - 1, desc);
|
2010-05-18 13:35:12 +07:00
|
|
|
res_bak = res;
|
|
|
|
goto err_unmap_iomem;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
list_for_each_entry(res, &resources->ioport, list) {
|
|
|
|
r = request_region(res->start, res->end - res->start, desc);
|
|
|
|
if (!r) {
|
|
|
|
pr_err(APEI_PFX
|
2011-12-08 10:25:42 +07:00
|
|
|
"Can not request [io %#06llx-%#06llx] for %s registers\n",
|
2010-05-18 13:35:12 +07:00
|
|
|
(unsigned long long)res->start,
|
2011-12-08 10:25:42 +07:00
|
|
|
(unsigned long long)res->end - 1, desc);
|
2010-05-18 13:35:12 +07:00
|
|
|
res_bak = res;
|
|
|
|
goto err_unmap_ioport;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2010-09-29 18:53:54 +07:00
|
|
|
rc = apei_resources_merge(&apei_resources_all, resources);
|
|
|
|
if (rc) {
|
|
|
|
pr_err(APEI_PFX "Fail to merge resources!\n");
|
|
|
|
goto err_unmap_ioport;
|
|
|
|
}
|
2010-05-18 13:35:12 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
err_unmap_ioport:
|
|
|
|
list_for_each_entry(res, &resources->ioport, list) {
|
|
|
|
if (res == res_bak)
|
|
|
|
break;
|
2010-08-02 14:48:22 +07:00
|
|
|
release_region(res->start, res->end - res->start);
|
2010-05-18 13:35:12 +07:00
|
|
|
}
|
|
|
|
res_bak = NULL;
|
|
|
|
err_unmap_iomem:
|
|
|
|
list_for_each_entry(res, &resources->iomem, list) {
|
|
|
|
if (res == res_bak)
|
|
|
|
break;
|
2010-08-02 14:48:22 +07:00
|
|
|
release_mem_region(res->start, res->end - res->start);
|
2010-05-18 13:35:12 +07:00
|
|
|
}
|
2011-12-08 10:25:50 +07:00
|
|
|
res_fini:
|
|
|
|
apei_resources_fini(&nvs_resources);
|
2010-09-29 18:53:54 +07:00
|
|
|
return rc;
|
2010-05-18 13:35:12 +07:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_resources_request);
|
|
|
|
|
|
|
|
void apei_resources_release(struct apei_resources *resources)
|
|
|
|
{
|
2010-09-29 18:53:54 +07:00
|
|
|
int rc;
|
2010-05-18 13:35:12 +07:00
|
|
|
struct apei_res *res;
|
|
|
|
|
|
|
|
list_for_each_entry(res, &resources->iomem, list)
|
|
|
|
release_mem_region(res->start, res->end - res->start);
|
|
|
|
list_for_each_entry(res, &resources->ioport, list)
|
|
|
|
release_region(res->start, res->end - res->start);
|
|
|
|
|
2010-09-29 18:53:54 +07:00
|
|
|
rc = apei_resources_sub(&apei_resources_all, resources);
|
|
|
|
if (rc)
|
|
|
|
pr_err(APEI_PFX "Fail to sub resources!\n");
|
2010-05-18 13:35:12 +07:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_resources_release);
|
|
|
|
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr,
|
|
|
|
u32 *access_bit_width)
|
2010-05-18 13:35:12 +07:00
|
|
|
{
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
u32 bit_width, bit_offset, access_size_code, space_id;
|
2010-05-18 13:35:12 +07:00
|
|
|
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
bit_width = reg->bit_width;
|
|
|
|
bit_offset = reg->bit_offset;
|
|
|
|
access_size_code = reg->access_width;
|
2010-05-18 13:35:12 +07:00
|
|
|
space_id = reg->space_id;
|
|
|
|
/* Handle possible alignment issues */
|
|
|
|
memcpy(paddr, ®->address, sizeof(*paddr));
|
|
|
|
if (!*paddr) {
|
|
|
|
pr_warning(FW_BUG APEI_PFX
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
"Invalid physical address in GAR [0x%llx/%u/%u/%u/%u]\n",
|
|
|
|
*paddr, bit_width, bit_offset, access_size_code,
|
|
|
|
space_id);
|
2010-05-18 13:35:12 +07:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
if (access_size_code < 1 || access_size_code > 4) {
|
2010-05-18 13:35:12 +07:00
|
|
|
pr_warning(FW_BUG APEI_PFX
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
"Invalid access size code in GAR [0x%llx/%u/%u/%u/%u]\n",
|
|
|
|
*paddr, bit_width, bit_offset, access_size_code,
|
|
|
|
space_id);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
*access_bit_width = 1UL << (access_size_code + 2);
|
|
|
|
|
2012-06-12 15:43:28 +07:00
|
|
|
/* Fixup common BIOS bug */
|
|
|
|
if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 &&
|
|
|
|
*access_bit_width < 32)
|
|
|
|
*access_bit_width = 32;
|
|
|
|
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
if ((bit_width + bit_offset) > *access_bit_width) {
|
|
|
|
pr_warning(FW_BUG APEI_PFX
|
|
|
|
"Invalid bit width + offset in GAR [0x%llx/%u/%u/%u/%u]\n",
|
|
|
|
*paddr, bit_width, bit_offset, access_size_code,
|
|
|
|
space_id);
|
2010-05-18 13:35:12 +07:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY &&
|
|
|
|
space_id != ACPI_ADR_SPACE_SYSTEM_IO) {
|
|
|
|
pr_warning(FW_BUG APEI_PFX
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
"Invalid address space type in GAR [0x%llx/%u/%u/%u/%u]\n",
|
|
|
|
*paddr, bit_width, bit_offset, access_size_code,
|
|
|
|
space_id);
|
2010-05-18 13:35:12 +07:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-06-12 10:20:19 +07:00
|
|
|
int apei_map_generic_address(struct acpi_generic_address *reg)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
u32 access_bit_width;
|
|
|
|
u64 address;
|
|
|
|
|
|
|
|
rc = apei_check_gar(reg, &address, &access_bit_width);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
return acpi_os_map_generic_address(reg);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_map_generic_address);
|
|
|
|
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
/* read GAR in interrupt (including NMI) or process context */
|
|
|
|
int apei_read(u64 *val, struct acpi_generic_address *reg)
|
|
|
|
{
|
|
|
|
int rc;
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
u32 access_bit_width;
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
u64 address;
|
|
|
|
acpi_status status;
|
|
|
|
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
rc = apei_check_gar(reg, &address, &access_bit_width);
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
*val = 0;
|
|
|
|
switch(reg->space_id) {
|
|
|
|
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
|
2012-03-31 03:12:23 +07:00
|
|
|
status = acpi_os_read_memory((acpi_physical_address) address,
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
val, access_bit_width);
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
if (ACPI_FAILURE(status))
|
|
|
|
return -EIO;
|
|
|
|
break;
|
|
|
|
case ACPI_ADR_SPACE_SYSTEM_IO:
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
status = acpi_os_read_port(address, (u32 *)val,
|
|
|
|
access_bit_width);
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
if (ACPI_FAILURE(status))
|
|
|
|
return -EIO;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_read);
|
|
|
|
|
|
|
|
/* write GAR in interrupt (including NMI) or process context */
|
|
|
|
int apei_write(u64 val, struct acpi_generic_address *reg)
|
|
|
|
{
|
|
|
|
int rc;
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
u32 access_bit_width;
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
u64 address;
|
|
|
|
acpi_status status;
|
|
|
|
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
rc = apei_check_gar(reg, &address, &access_bit_width);
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
switch (reg->space_id) {
|
|
|
|
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
|
2012-03-31 03:12:23 +07:00
|
|
|
status = acpi_os_write_memory((acpi_physical_address) address,
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
val, access_bit_width);
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
if (ACPI_FAILURE(status))
|
|
|
|
return -EIO;
|
|
|
|
break;
|
|
|
|
case ACPI_ADR_SPACE_SYSTEM_IO:
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
status = acpi_os_write_port(address, val, access_bit_width);
|
ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-08 06:23:41 +07:00
|
|
|
if (ACPI_FAILURE(status))
|
|
|
|
return -EIO;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_write);
|
|
|
|
|
2010-05-18 13:35:12 +07:00
|
|
|
static int collect_res_callback(struct apei_exec_context *ctx,
|
|
|
|
struct acpi_whea_header *entry,
|
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
struct apei_resources *resources = data;
|
|
|
|
struct acpi_generic_address *reg = &entry->register_region;
|
|
|
|
u8 ins = entry->instruction;
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
u32 access_bit_width;
|
2010-05-18 13:35:12 +07:00
|
|
|
u64 paddr;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (!(ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER))
|
|
|
|
return 0;
|
|
|
|
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
rc = apei_check_gar(reg, &paddr, &access_bit_width);
|
2010-05-18 13:35:12 +07:00
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
switch (reg->space_id) {
|
|
|
|
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
|
|
|
|
return apei_res_add(&resources->iomem, paddr,
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
access_bit_width / 8);
|
2010-05-18 13:35:12 +07:00
|
|
|
case ACPI_ADR_SPACE_SYSTEM_IO:
|
|
|
|
return apei_res_add(&resources->ioport, paddr,
|
ACPI, APEI: Fix incorrect APEI register bit width check and usage
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 05:28:50 +07:00
|
|
|
access_bit_width / 8);
|
2010-05-18 13:35:12 +07:00
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Same register may be used by multiple instructions in GARs, so
|
|
|
|
* resources are collected before requesting.
|
|
|
|
*/
|
|
|
|
int apei_exec_collect_resources(struct apei_exec_context *ctx,
|
|
|
|
struct apei_resources *resources)
|
|
|
|
{
|
|
|
|
return apei_exec_for_each_entry(ctx, collect_res_callback,
|
|
|
|
resources, NULL);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_exec_collect_resources);
|
|
|
|
|
|
|
|
struct dentry *apei_get_debugfs_dir(void)
|
|
|
|
{
|
|
|
|
static struct dentry *dapei;
|
|
|
|
|
|
|
|
if (!dapei)
|
|
|
|
dapei = debugfs_create_dir("apei", NULL);
|
|
|
|
|
|
|
|
return dapei;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_get_debugfs_dir);
|
2011-07-13 12:14:21 +07:00
|
|
|
|
|
|
|
int apei_osc_setup(void)
|
|
|
|
{
|
|
|
|
static u8 whea_uuid_str[] = "ed855e0c-6c90-47bf-a62a-26de0fc5ad5c";
|
|
|
|
acpi_handle handle;
|
|
|
|
u32 capbuf[3];
|
|
|
|
struct acpi_osc_context context = {
|
|
|
|
.uuid_str = whea_uuid_str,
|
|
|
|
.rev = 1,
|
|
|
|
.cap.length = sizeof(capbuf),
|
|
|
|
.cap.pointer = capbuf,
|
|
|
|
};
|
|
|
|
|
|
|
|
capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
|
2011-08-11 23:06:28 +07:00
|
|
|
capbuf[OSC_SUPPORT_TYPE] = 1;
|
2011-07-13 12:14:21 +07:00
|
|
|
capbuf[OSC_CONTROL_TYPE] = 0;
|
|
|
|
|
|
|
|
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))
|
|
|
|
|| ACPI_FAILURE(acpi_run_osc(handle, &context)))
|
|
|
|
return -EIO;
|
|
|
|
else {
|
|
|
|
kfree(context.ret.pointer);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(apei_osc_setup);
|