V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
/* interrupt handling
|
|
|
|
Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
|
|
|
|
Copyright (C) 2004 Chris Kennedy <c@groovy.org>
|
|
|
|
Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program; if not, write to the Free Software
|
|
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "ivtv-driver.h"
|
|
|
|
#include "ivtv-queue.h"
|
|
|
|
#include "ivtv-udma.h"
|
|
|
|
#include "ivtv-irq.h"
|
|
|
|
#include "ivtv-mailbox.h"
|
|
|
|
#include "ivtv-vbi.h"
|
2007-03-10 16:52:02 +07:00
|
|
|
#include "ivtv-yuv.h"
|
2010-03-28 00:10:13 +07:00
|
|
|
#include <media/v4l2-event.h>
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
#define DMA_MAGIC_COOKIE 0x000001fe
|
|
|
|
|
|
|
|
static void ivtv_dma_dec_start(struct ivtv_stream *s);
|
|
|
|
|
|
|
|
static const int ivtv_stream_map[] = {
|
|
|
|
IVTV_ENC_STREAM_TYPE_MPG,
|
|
|
|
IVTV_ENC_STREAM_TYPE_YUV,
|
|
|
|
IVTV_ENC_STREAM_TYPE_PCM,
|
|
|
|
IVTV_ENC_STREAM_TYPE_VBI,
|
|
|
|
};
|
|
|
|
|
2007-05-20 00:07:16 +07:00
|
|
|
|
|
|
|
static void ivtv_pio_work_handler(struct ivtv *itv)
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
{
|
2007-05-20 00:07:16 +07:00
|
|
|
struct ivtv_stream *s = &itv->streams[itv->cur_pio_stream];
|
|
|
|
struct ivtv_buffer *buf;
|
|
|
|
int i = 0;
|
|
|
|
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_DMA("ivtv_pio_work_handler\n");
|
2007-05-20 00:07:16 +07:00
|
|
|
if (itv->cur_pio_stream < 0 || itv->cur_pio_stream >= IVTV_MAX_STREAMS ||
|
2009-02-07 17:02:27 +07:00
|
|
|
s->vdev == NULL || !ivtv_use_pio(s)) {
|
2007-05-20 00:07:16 +07:00
|
|
|
itv->cur_pio_stream = -1;
|
|
|
|
/* trigger PIO complete user interrupt */
|
|
|
|
write_reg(IVTV_IRQ_ENC_PIO_COMPLETE, 0x44);
|
|
|
|
return;
|
|
|
|
}
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_DMA("Process PIO %s\n", s->name);
|
2007-10-10 15:37:41 +07:00
|
|
|
list_for_each_entry(buf, &s->q_dma.list, list) {
|
2007-07-29 05:45:50 +07:00
|
|
|
u32 size = s->sg_processing[i].size & 0x3ffff;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
2007-05-20 00:07:16 +07:00
|
|
|
/* Copy the data from the card to the buffer */
|
|
|
|
if (s->type == IVTV_DEC_STREAM_TYPE_VBI) {
|
2007-07-29 05:45:50 +07:00
|
|
|
memcpy_fromio(buf->buf, itv->dec_mem + s->sg_processing[i].src - IVTV_DECODER_OFFSET, size);
|
2007-05-20 00:07:16 +07:00
|
|
|
}
|
|
|
|
else {
|
2007-07-29 05:45:50 +07:00
|
|
|
memcpy_fromio(buf->buf, itv->enc_mem + s->sg_processing[i].src, size);
|
2007-05-20 00:07:16 +07:00
|
|
|
}
|
|
|
|
i++;
|
2007-07-29 05:45:50 +07:00
|
|
|
if (i == s->sg_processing_size)
|
|
|
|
break;
|
2007-05-20 00:07:16 +07:00
|
|
|
}
|
|
|
|
write_reg(IVTV_IRQ_ENC_PIO_COMPLETE, 0x44);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
|
2010-06-29 15:07:09 +07:00
|
|
|
void ivtv_irq_work_handler(struct kthread_work *work)
|
2007-03-10 16:52:02 +07:00
|
|
|
{
|
2010-06-29 15:07:09 +07:00
|
|
|
struct ivtv *itv = container_of(work, struct ivtv, irq_work);
|
2007-03-10 16:52:02 +07:00
|
|
|
|
2007-05-20 00:07:16 +07:00
|
|
|
if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags))
|
|
|
|
ivtv_pio_work_handler(itv);
|
|
|
|
|
2007-03-10 16:52:02 +07:00
|
|
|
if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_VBI, &itv->i_flags))
|
2007-05-20 00:07:16 +07:00
|
|
|
ivtv_vbi_work_handler(itv);
|
2007-03-10 16:52:02 +07:00
|
|
|
|
|
|
|
if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_YUV, &itv->i_flags))
|
|
|
|
ivtv_yuv_work_handler(itv);
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
/* Determine the required DMA size, setup enough buffers in the predma queue and
|
|
|
|
actually copy the data from the card to the buffers in case a PIO transfer is
|
|
|
|
required for this stream.
|
|
|
|
*/
|
|
|
|
static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MAX_DATA])
|
|
|
|
{
|
|
|
|
struct ivtv *itv = s->itv;
|
|
|
|
struct ivtv_buffer *buf;
|
|
|
|
u32 bytes_needed = 0;
|
|
|
|
u32 offset, size;
|
|
|
|
u32 UVoffset = 0, UVsize = 0;
|
|
|
|
int skip_bufs = s->q_predma.buffers;
|
2007-07-29 05:45:50 +07:00
|
|
|
int idx = s->sg_pending_size;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* sanity checks */
|
2009-02-07 17:02:27 +07:00
|
|
|
if (s->vdev == NULL) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
IVTV_DEBUG_WARN("Stream %s not started\n", s->name);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
if (!test_bit(IVTV_F_S_CLAIMED, &s->s_flags)) {
|
|
|
|
IVTV_DEBUG_WARN("Stream %s not open\n", s->name);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* determine offset, size and PTS for the various streams */
|
|
|
|
switch (s->type) {
|
|
|
|
case IVTV_ENC_STREAM_TYPE_MPG:
|
|
|
|
offset = data[1];
|
|
|
|
size = data[2];
|
2007-07-29 05:45:50 +07:00
|
|
|
s->pending_pts = 0;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
break;
|
|
|
|
|
|
|
|
case IVTV_ENC_STREAM_TYPE_YUV:
|
|
|
|
offset = data[1];
|
|
|
|
size = data[2];
|
|
|
|
UVoffset = data[3];
|
|
|
|
UVsize = data[4];
|
2007-07-29 05:45:50 +07:00
|
|
|
s->pending_pts = ((u64) data[5] << 32) | data[6];
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
break;
|
|
|
|
|
|
|
|
case IVTV_ENC_STREAM_TYPE_PCM:
|
|
|
|
offset = data[1] + 12;
|
|
|
|
size = data[2] - 12;
|
2007-07-29 05:45:50 +07:00
|
|
|
s->pending_pts = read_dec(offset - 8) |
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
((u64)(read_dec(offset - 12)) << 32);
|
|
|
|
if (itv->has_cx23415)
|
|
|
|
offset += IVTV_DECODER_OFFSET;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case IVTV_ENC_STREAM_TYPE_VBI:
|
|
|
|
size = itv->vbi.enc_size * itv->vbi.fpi;
|
|
|
|
offset = read_enc(itv->vbi.enc_start - 4) + 12;
|
|
|
|
if (offset == 12) {
|
|
|
|
IVTV_DEBUG_INFO("VBI offset == 0\n");
|
|
|
|
return -1;
|
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
s->pending_pts = read_enc(offset - 4) | ((u64)read_enc(offset - 8) << 32);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
break;
|
|
|
|
|
|
|
|
case IVTV_DEC_STREAM_TYPE_VBI:
|
|
|
|
size = read_dec(itv->vbi.dec_start + 4) + 8;
|
|
|
|
offset = read_dec(itv->vbi.dec_start) + itv->vbi.dec_start;
|
2007-07-29 05:45:50 +07:00
|
|
|
s->pending_pts = 0;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
offset += IVTV_DECODER_OFFSET;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
/* shouldn't happen */
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* if this is the start of the DMA then fill in the magic cookie */
|
2007-08-19 01:16:00 +07:00
|
|
|
if (s->sg_pending_size == 0 && ivtv_use_dma(s)) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
if (itv->has_cx23415 && (s->type == IVTV_ENC_STREAM_TYPE_PCM ||
|
|
|
|
s->type == IVTV_DEC_STREAM_TYPE_VBI)) {
|
2007-07-29 05:45:50 +07:00
|
|
|
s->pending_backup = read_dec(offset - IVTV_DECODER_OFFSET);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
write_dec_sync(cpu_to_le32(DMA_MAGIC_COOKIE), offset - IVTV_DECODER_OFFSET);
|
|
|
|
}
|
|
|
|
else {
|
2007-07-29 05:45:50 +07:00
|
|
|
s->pending_backup = read_enc(offset);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
write_enc_sync(cpu_to_le32(DMA_MAGIC_COOKIE), offset);
|
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
s->pending_offset = offset;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
bytes_needed = size;
|
|
|
|
if (s->type == IVTV_ENC_STREAM_TYPE_YUV) {
|
|
|
|
/* The size for the Y samples needs to be rounded upwards to a
|
|
|
|
multiple of the buf_size. The UV samples then start in the
|
|
|
|
next buffer. */
|
|
|
|
bytes_needed = s->buf_size * ((bytes_needed + s->buf_size - 1) / s->buf_size);
|
|
|
|
bytes_needed += UVsize;
|
|
|
|
}
|
|
|
|
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_DMA("%s %s: 0x%08x bytes at 0x%08x\n",
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
ivtv_use_pio(s) ? "PIO" : "DMA", s->name, bytes_needed, offset);
|
|
|
|
|
|
|
|
rc = ivtv_queue_move(s, &s->q_free, &s->q_full, &s->q_predma, bytes_needed);
|
|
|
|
if (rc < 0) { /* Insufficient buffers */
|
|
|
|
IVTV_DEBUG_WARN("Cannot obtain %d bytes for %s data transfer\n",
|
|
|
|
bytes_needed, s->name);
|
|
|
|
return -1;
|
|
|
|
}
|
2009-05-02 21:10:23 +07:00
|
|
|
if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name);
|
|
|
|
IVTV_WARN("Cause: the application is not reading fast enough.\n");
|
|
|
|
}
|
|
|
|
s->buffers_stolen = rc;
|
|
|
|
|
2007-07-29 05:45:50 +07:00
|
|
|
/* got the buffers, now fill in sg_pending */
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
buf = list_entry(s->q_predma.list.next, struct ivtv_buffer, list);
|
|
|
|
memset(buf->buf, 0, 128);
|
2007-10-10 15:37:41 +07:00
|
|
|
list_for_each_entry(buf, &s->q_predma.list, list) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
if (skip_bufs-- > 0)
|
|
|
|
continue;
|
2007-07-29 05:45:50 +07:00
|
|
|
s->sg_pending[idx].dst = buf->dma_handle;
|
|
|
|
s->sg_pending[idx].src = offset;
|
|
|
|
s->sg_pending[idx].size = s->buf_size;
|
2007-12-08 20:35:06 +07:00
|
|
|
buf->bytesused = min(size, s->buf_size);
|
2007-07-28 22:07:12 +07:00
|
|
|
buf->dma_xfer_cnt = s->dma_xfer_cnt;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
s->q_predma.bytesused += buf->bytesused;
|
|
|
|
size -= buf->bytesused;
|
|
|
|
offset += s->buf_size;
|
|
|
|
|
|
|
|
/* Sync SG buffers */
|
|
|
|
ivtv_buf_sync_for_device(s, buf);
|
|
|
|
|
|
|
|
if (size == 0) { /* YUV */
|
|
|
|
/* process the UV section */
|
|
|
|
offset = UVoffset;
|
|
|
|
size = UVsize;
|
|
|
|
}
|
|
|
|
idx++;
|
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
s->sg_pending_size = idx;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dma_post(struct ivtv_stream *s)
|
|
|
|
{
|
|
|
|
struct ivtv *itv = s->itv;
|
|
|
|
struct ivtv_buffer *buf = NULL;
|
|
|
|
struct list_head *p;
|
|
|
|
u32 offset;
|
2008-05-21 10:31:41 +07:00
|
|
|
__le32 *u32buf;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
int x = 0;
|
|
|
|
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA",
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
s->name, s->dma_offset);
|
|
|
|
list_for_each(p, &s->q_dma.list) {
|
|
|
|
buf = list_entry(p, struct ivtv_buffer, list);
|
2008-05-21 10:31:41 +07:00
|
|
|
u32buf = (__le32 *)buf->buf;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
/* Sync Buffer */
|
|
|
|
ivtv_buf_sync_for_cpu(s, buf);
|
|
|
|
|
2007-08-19 01:16:00 +07:00
|
|
|
if (x == 0 && ivtv_use_dma(s)) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
offset = s->dma_last_offset;
|
|
|
|
if (u32buf[offset / 4] != DMA_MAGIC_COOKIE)
|
|
|
|
{
|
|
|
|
for (offset = 0; offset < 64; offset++) {
|
|
|
|
if (u32buf[offset] == DMA_MAGIC_COOKIE) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
offset *= 4;
|
|
|
|
if (offset == 256) {
|
|
|
|
IVTV_DEBUG_WARN("%s: Couldn't find start of buffer within the first 256 bytes\n", s->name);
|
|
|
|
offset = s->dma_last_offset;
|
|
|
|
}
|
|
|
|
if (s->dma_last_offset != offset)
|
|
|
|
IVTV_DEBUG_WARN("%s: offset %d -> %d\n", s->name, s->dma_last_offset, offset);
|
|
|
|
s->dma_last_offset = offset;
|
|
|
|
}
|
|
|
|
if (itv->has_cx23415 && (s->type == IVTV_ENC_STREAM_TYPE_PCM ||
|
|
|
|
s->type == IVTV_DEC_STREAM_TYPE_VBI)) {
|
|
|
|
write_dec_sync(0, s->dma_offset - IVTV_DECODER_OFFSET);
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
write_enc_sync(0, s->dma_offset);
|
|
|
|
}
|
|
|
|
if (offset) {
|
|
|
|
buf->bytesused -= offset;
|
|
|
|
memcpy(buf->buf, buf->buf + offset, buf->bytesused + offset);
|
|
|
|
}
|
|
|
|
*u32buf = cpu_to_le32(s->dma_backup);
|
|
|
|
}
|
|
|
|
x++;
|
|
|
|
/* flag byteswap ABCD -> DCBA for MPG & VBI data outside irq */
|
|
|
|
if (s->type == IVTV_ENC_STREAM_TYPE_MPG ||
|
|
|
|
s->type == IVTV_ENC_STREAM_TYPE_VBI)
|
2007-07-28 22:07:12 +07:00
|
|
|
buf->b_flags |= IVTV_F_B_NEED_BUF_SWAP;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
if (buf)
|
|
|
|
buf->bytesused += s->dma_last_offset;
|
|
|
|
if (buf && s->type == IVTV_DEC_STREAM_TYPE_VBI) {
|
2007-10-10 15:37:41 +07:00
|
|
|
list_for_each_entry(buf, &s->q_dma.list, list) {
|
2007-05-20 00:07:16 +07:00
|
|
|
/* Parse and Groom VBI Data */
|
|
|
|
s->q_dma.bytesused -= buf->bytesused;
|
|
|
|
ivtv_process_vbi_data(itv, buf, 0, s->type);
|
|
|
|
s->q_dma.bytesused += buf->bytesused;
|
|
|
|
}
|
2011-10-12 15:36:04 +07:00
|
|
|
if (s->fh == NULL) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
ivtv_queue_move(s, &s->q_dma, NULL, &s->q_free, 0);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
ivtv_queue_move(s, &s->q_dma, NULL, &s->q_full, s->q_dma.bytesused);
|
2011-10-12 15:36:04 +07:00
|
|
|
if (s->fh)
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
wake_up(&s->waitq);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock)
|
|
|
|
{
|
|
|
|
struct ivtv *itv = s->itv;
|
V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the IVTV_IOC_DMA_FRAME framework
Previously, all yuv data written to /dev/video48 had only basic support with
no double buffering to avoid display tearing.
With this patch, yuv frames written to video48 are now handled by the existing
IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to
avoid tearing, and honour scaling mode & field order options. Unlike the
proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the
V4L2 API.
Due to mpeg & yuv output restrictions being different, their V4L2 output
controls have been separated. To control the yuv output, the V4L2 calls must
be done via video48.
If the ivtvfb module is loaded, there will be one side effect to this merge.
The yuv output window will be constrained to the visible framebuffer area. In
the event that a virtual framebuffer size is being used, the limit to the
output size will be the virtual dimensions, but only the portion that falls
within the currently visible area of the framebuffer will be shown.
Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720
pixels wide. However the height must only be padded up the nearest multiple
of 32. This would mean an image of 102 lines must be padded to 128. As long
as the true source image size is given, the padding will not be visible in
the final output.
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-06 00:27:09 +07:00
|
|
|
struct yuv_playback_info *yi = &itv->yuv_info;
|
|
|
|
u8 frame = yi->draw_frame;
|
|
|
|
struct yuv_frame_info *f = &yi->new_frame_info[frame];
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
struct ivtv_buffer *buf;
|
V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the IVTV_IOC_DMA_FRAME framework
Previously, all yuv data written to /dev/video48 had only basic support with
no double buffering to avoid display tearing.
With this patch, yuv frames written to video48 are now handled by the existing
IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to
avoid tearing, and honour scaling mode & field order options. Unlike the
proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the
V4L2 API.
Due to mpeg & yuv output restrictions being different, their V4L2 output
controls have been separated. To control the yuv output, the V4L2 calls must
be done via video48.
If the ivtvfb module is loaded, there will be one side effect to this merge.
The yuv output window will be constrained to the visible framebuffer area. In
the event that a virtual framebuffer size is being used, the limit to the
output size will be the virtual dimensions, but only the portion that falls
within the currently visible area of the framebuffer will be shown.
Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720
pixels wide. However the height must only be padded up the nearest multiple
of 32. This would mean an image of 102 lines must be padded to 128. As long
as the true source image size is given, the padding will not be visible in
the final output.
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-06 00:27:09 +07:00
|
|
|
u32 y_size = 720 * ((f->src_h + 31) & ~31);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
u32 uv_offset = offset + IVTV_YUV_BUFFER_UV_OFFSET;
|
|
|
|
int y_done = 0;
|
|
|
|
int bytes_written = 0;
|
|
|
|
unsigned long flags = 0;
|
|
|
|
int idx = 0;
|
|
|
|
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_DMA("DEC PREPARE DMA %s: %08x %08x\n", s->name, s->q_predma.bytesused, offset);
|
V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the IVTV_IOC_DMA_FRAME framework
Previously, all yuv data written to /dev/video48 had only basic support with
no double buffering to avoid display tearing.
With this patch, yuv frames written to video48 are now handled by the existing
IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to
avoid tearing, and honour scaling mode & field order options. Unlike the
proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the
V4L2 API.
Due to mpeg & yuv output restrictions being different, their V4L2 output
controls have been separated. To control the yuv output, the V4L2 calls must
be done via video48.
If the ivtvfb module is loaded, there will be one side effect to this merge.
The yuv output window will be constrained to the visible framebuffer area. In
the event that a virtual framebuffer size is being used, the limit to the
output size will be the virtual dimensions, but only the portion that falls
within the currently visible area of the framebuffer will be shown.
Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720
pixels wide. However the height must only be padded up the nearest multiple
of 32. This would mean an image of 102 lines must be padded to 128. As long
as the true source image size is given, the padding will not be visible in
the final output.
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-06 00:27:09 +07:00
|
|
|
|
|
|
|
/* Insert buffer block for YUV if needed */
|
|
|
|
if (s->type == IVTV_DEC_STREAM_TYPE_YUV && f->offset_y) {
|
|
|
|
if (yi->blanking_dmaptr) {
|
|
|
|
s->sg_pending[idx].src = yi->blanking_dmaptr;
|
|
|
|
s->sg_pending[idx].dst = offset;
|
|
|
|
s->sg_pending[idx].size = 720 * 16;
|
|
|
|
}
|
|
|
|
offset += 720 * 16;
|
|
|
|
idx++;
|
|
|
|
}
|
|
|
|
|
2007-10-10 15:37:41 +07:00
|
|
|
list_for_each_entry(buf, &s->q_predma.list, list) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
/* YUV UV Offset from Y Buffer */
|
2007-10-16 13:21:46 +07:00
|
|
|
if (s->type == IVTV_DEC_STREAM_TYPE_YUV && !y_done &&
|
|
|
|
(bytes_written + buf->bytesused) >= y_size) {
|
|
|
|
s->sg_pending[idx].src = buf->dma_handle;
|
|
|
|
s->sg_pending[idx].dst = offset;
|
|
|
|
s->sg_pending[idx].size = y_size - bytes_written;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
offset = uv_offset;
|
2007-10-16 13:21:46 +07:00
|
|
|
if (s->sg_pending[idx].size != buf->bytesused) {
|
|
|
|
idx++;
|
|
|
|
s->sg_pending[idx].src =
|
|
|
|
buf->dma_handle + s->sg_pending[idx - 1].size;
|
|
|
|
s->sg_pending[idx].dst = offset;
|
|
|
|
s->sg_pending[idx].size =
|
|
|
|
buf->bytesused - s->sg_pending[idx - 1].size;
|
|
|
|
offset += s->sg_pending[idx].size;
|
|
|
|
}
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
y_done = 1;
|
2007-10-16 13:21:46 +07:00
|
|
|
} else {
|
|
|
|
s->sg_pending[idx].src = buf->dma_handle;
|
|
|
|
s->sg_pending[idx].dst = offset;
|
|
|
|
s->sg_pending[idx].size = buf->bytesused;
|
|
|
|
offset += buf->bytesused;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
bytes_written += buf->bytesused;
|
|
|
|
|
|
|
|
/* Sync SG buffers */
|
|
|
|
ivtv_buf_sync_for_device(s, buf);
|
|
|
|
idx++;
|
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
s->sg_pending_size = idx;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
/* Sync Hardware SG List of buffers */
|
|
|
|
ivtv_stream_sync_for_device(s);
|
|
|
|
if (lock)
|
|
|
|
spin_lock_irqsave(&itv->dma_reg_lock, flags);
|
|
|
|
if (!test_bit(IVTV_F_I_DMA, &itv->i_flags)) {
|
|
|
|
ivtv_dma_dec_start(s);
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
set_bit(IVTV_F_S_DMA_PENDING, &s->s_flags);
|
|
|
|
}
|
|
|
|
if (lock)
|
|
|
|
spin_unlock_irqrestore(&itv->dma_reg_lock, flags);
|
|
|
|
}
|
|
|
|
|
2007-07-29 05:45:50 +07:00
|
|
|
static void ivtv_dma_enc_start_xfer(struct ivtv_stream *s)
|
|
|
|
{
|
|
|
|
struct ivtv *itv = s->itv;
|
|
|
|
|
|
|
|
s->sg_dma->src = cpu_to_le32(s->sg_processing[s->sg_processed].src);
|
|
|
|
s->sg_dma->dst = cpu_to_le32(s->sg_processing[s->sg_processed].dst);
|
|
|
|
s->sg_dma->size = cpu_to_le32(s->sg_processing[s->sg_processed].size | 0x80000000);
|
|
|
|
s->sg_processed++;
|
|
|
|
/* Sync Hardware SG List of buffers */
|
|
|
|
ivtv_stream_sync_for_device(s);
|
|
|
|
write_reg(s->sg_handle, IVTV_REG_ENCDMAADDR);
|
|
|
|
write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x02, IVTV_REG_DMAXFER);
|
2008-04-26 21:22:11 +07:00
|
|
|
itv->dma_timer.expires = jiffies + msecs_to_jiffies(300);
|
2008-04-23 00:42:16 +07:00
|
|
|
add_timer(&itv->dma_timer);
|
2007-07-29 05:45:50 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void ivtv_dma_dec_start_xfer(struct ivtv_stream *s)
|
|
|
|
{
|
|
|
|
struct ivtv *itv = s->itv;
|
|
|
|
|
|
|
|
s->sg_dma->src = cpu_to_le32(s->sg_processing[s->sg_processed].src);
|
|
|
|
s->sg_dma->dst = cpu_to_le32(s->sg_processing[s->sg_processed].dst);
|
|
|
|
s->sg_dma->size = cpu_to_le32(s->sg_processing[s->sg_processed].size | 0x80000000);
|
|
|
|
s->sg_processed++;
|
|
|
|
/* Sync Hardware SG List of buffers */
|
|
|
|
ivtv_stream_sync_for_device(s);
|
|
|
|
write_reg(s->sg_handle, IVTV_REG_DECDMAADDR);
|
|
|
|
write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x01, IVTV_REG_DMAXFER);
|
2008-04-26 21:22:11 +07:00
|
|
|
itv->dma_timer.expires = jiffies + msecs_to_jiffies(300);
|
2008-04-23 00:42:16 +07:00
|
|
|
add_timer(&itv->dma_timer);
|
2007-07-29 05:45:50 +07:00
|
|
|
}
|
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
/* start the encoder DMA */
|
|
|
|
static void ivtv_dma_enc_start(struct ivtv_stream *s)
|
|
|
|
{
|
|
|
|
struct ivtv *itv = s->itv;
|
|
|
|
struct ivtv_stream *s_vbi = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
|
|
|
|
int i;
|
|
|
|
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_DMA("start %s for %s\n", ivtv_use_dma(s) ? "DMA" : "PIO", s->name);
|
2007-05-20 00:07:16 +07:00
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
if (s->q_predma.bytesused)
|
|
|
|
ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused);
|
2007-05-20 00:07:16 +07:00
|
|
|
|
|
|
|
if (ivtv_use_dma(s))
|
2007-07-29 05:45:50 +07:00
|
|
|
s->sg_pending[s->sg_pending_size - 1].size += 256;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
/* If this is an MPEG stream, and VBI data is also pending, then append the
|
|
|
|
VBI DMA to the MPEG DMA and transfer both sets of data at once.
|
|
|
|
|
|
|
|
VBI DMA is a second class citizen compared to MPEG and mixing them together
|
|
|
|
will confuse the firmware (the end of a VBI DMA is seen as the end of a
|
|
|
|
MPEG DMA, thus effectively dropping an MPEG frame). So instead we make
|
|
|
|
sure we only use the MPEG DMA to transfer the VBI DMA if both are in
|
|
|
|
use. This way no conflicts occur. */
|
|
|
|
clear_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags);
|
2007-07-29 05:45:50 +07:00
|
|
|
if (s->type == IVTV_ENC_STREAM_TYPE_MPG && s_vbi->sg_pending_size &&
|
|
|
|
s->sg_pending_size + s_vbi->sg_pending_size <= s->buffers) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
ivtv_queue_move(s_vbi, &s_vbi->q_predma, NULL, &s_vbi->q_dma, s_vbi->q_predma.bytesused);
|
2007-05-20 00:07:16 +07:00
|
|
|
if (ivtv_use_dma(s_vbi))
|
2007-07-29 05:45:50 +07:00
|
|
|
s_vbi->sg_pending[s_vbi->sg_pending_size - 1].size += 256;
|
|
|
|
for (i = 0; i < s_vbi->sg_pending_size; i++) {
|
|
|
|
s->sg_pending[s->sg_pending_size++] = s_vbi->sg_pending[i];
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
s_vbi->dma_offset = s_vbi->pending_offset;
|
|
|
|
s_vbi->sg_pending_size = 0;
|
2007-07-28 22:07:12 +07:00
|
|
|
s_vbi->dma_xfer_cnt++;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
set_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags);
|
2007-12-02 16:56:00 +07:00
|
|
|
IVTV_DEBUG_HI_DMA("include DMA for %s\n", s_vbi->name);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
|
2007-07-28 22:07:12 +07:00
|
|
|
s->dma_xfer_cnt++;
|
2008-05-21 10:31:41 +07:00
|
|
|
memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
|
2007-07-29 05:45:50 +07:00
|
|
|
s->sg_processing_size = s->sg_pending_size;
|
|
|
|
s->sg_pending_size = 0;
|
|
|
|
s->sg_processed = 0;
|
|
|
|
s->dma_offset = s->pending_offset;
|
|
|
|
s->dma_backup = s->pending_backup;
|
|
|
|
s->dma_pts = s->pending_pts;
|
2007-07-18 23:22:06 +07:00
|
|
|
|
2007-05-20 00:07:16 +07:00
|
|
|
if (ivtv_use_pio(s)) {
|
|
|
|
set_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags);
|
|
|
|
set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags);
|
|
|
|
set_bit(IVTV_F_I_PIO, &itv->i_flags);
|
|
|
|
itv->cur_pio_stream = s->type;
|
|
|
|
}
|
|
|
|
else {
|
2007-07-29 05:45:50 +07:00
|
|
|
itv->dma_retries = 0;
|
|
|
|
ivtv_dma_enc_start_xfer(s);
|
2007-05-20 00:07:16 +07:00
|
|
|
set_bit(IVTV_F_I_DMA, &itv->i_flags);
|
|
|
|
itv->cur_dma_stream = s->type;
|
|
|
|
}
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void ivtv_dma_dec_start(struct ivtv_stream *s)
|
|
|
|
{
|
|
|
|
struct ivtv *itv = s->itv;
|
|
|
|
|
|
|
|
if (s->q_predma.bytesused)
|
|
|
|
ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused);
|
2007-07-29 05:45:50 +07:00
|
|
|
s->dma_xfer_cnt++;
|
2008-05-21 10:31:41 +07:00
|
|
|
memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
|
2007-07-29 05:45:50 +07:00
|
|
|
s->sg_processing_size = s->sg_pending_size;
|
|
|
|
s->sg_pending_size = 0;
|
|
|
|
s->sg_processed = 0;
|
|
|
|
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_DMA("start DMA for %s\n", s->name);
|
2007-07-29 05:45:50 +07:00
|
|
|
itv->dma_retries = 0;
|
|
|
|
ivtv_dma_dec_start_xfer(s);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
set_bit(IVTV_F_I_DMA, &itv->i_flags);
|
|
|
|
itv->cur_dma_stream = s->type;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ivtv_irq_dma_read(struct ivtv *itv)
|
|
|
|
{
|
|
|
|
struct ivtv_stream *s = NULL;
|
|
|
|
struct ivtv_buffer *buf;
|
2007-07-29 05:45:50 +07:00
|
|
|
int hw_stream_type = 0;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_IRQ("DEC DMA READ\n");
|
2008-04-23 00:42:16 +07:00
|
|
|
|
|
|
|
del_timer(&itv->dma_timer);
|
|
|
|
|
|
|
|
if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) && itv->cur_dma_stream < 0)
|
2007-07-29 05:45:50 +07:00
|
|
|
return;
|
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
|
2007-07-29 05:45:50 +07:00
|
|
|
s = &itv->streams[itv->cur_dma_stream];
|
|
|
|
ivtv_stream_sync_for_cpu(s);
|
|
|
|
|
|
|
|
if (read_reg(IVTV_REG_DMASTATUS) & 0x14) {
|
|
|
|
IVTV_DEBUG_WARN("DEC DMA ERROR %x (xfer %d of %d, retry %d)\n",
|
|
|
|
read_reg(IVTV_REG_DMASTATUS),
|
|
|
|
s->sg_processed, s->sg_processing_size, itv->dma_retries);
|
|
|
|
write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
|
|
|
|
if (itv->dma_retries == 3) {
|
2007-08-19 01:48:42 +07:00
|
|
|
/* Too many retries, give up on this frame */
|
2007-07-29 05:45:50 +07:00
|
|
|
itv->dma_retries = 0;
|
2007-08-19 01:48:42 +07:00
|
|
|
s->sg_processed = s->sg_processing_size;
|
2007-07-29 05:45:50 +07:00
|
|
|
}
|
|
|
|
else {
|
|
|
|
/* Retry, starting with the first xfer segment.
|
|
|
|
Just retrying the current segment is not sufficient. */
|
|
|
|
s->sg_processed = 0;
|
|
|
|
itv->dma_retries++;
|
|
|
|
}
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
if (s->sg_processed < s->sg_processing_size) {
|
|
|
|
/* DMA next buffer */
|
|
|
|
ivtv_dma_dec_start_xfer(s);
|
|
|
|
return;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
if (s->type == IVTV_DEC_STREAM_TYPE_YUV)
|
|
|
|
hw_stream_type = 2;
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_DMA("DEC DATA READ %s: %d\n", s->name, s->q_dma.bytesused);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
/* For some reason must kick the firmware, like PIO mode,
|
|
|
|
I think this tells the firmware we are done and the size
|
|
|
|
of the xfer so it can calculate what we need next.
|
|
|
|
I think we can do this part ourselves but would have to
|
|
|
|
fully calculate xfer info ourselves and not use interrupts
|
|
|
|
*/
|
|
|
|
ivtv_vapi(itv, CX2341X_DEC_SCHED_DMA_FROM_HOST, 3, 0, s->q_dma.bytesused,
|
|
|
|
hw_stream_type);
|
|
|
|
|
|
|
|
/* Free last DMA call */
|
|
|
|
while ((buf = ivtv_dequeue(s, &s->q_dma)) != NULL) {
|
|
|
|
ivtv_buf_sync_for_cpu(s, buf);
|
|
|
|
ivtv_enqueue(s, buf, &s->q_free);
|
|
|
|
}
|
|
|
|
wake_up(&s->waitq);
|
|
|
|
}
|
|
|
|
clear_bit(IVTV_F_I_UDMA, &itv->i_flags);
|
|
|
|
clear_bit(IVTV_F_I_DMA, &itv->i_flags);
|
|
|
|
itv->cur_dma_stream = -1;
|
|
|
|
wake_up(&itv->dma_waitq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ivtv_irq_enc_dma_complete(struct ivtv *itv)
|
|
|
|
{
|
|
|
|
u32 data[CX2341X_MBOX_MAX_DATA];
|
|
|
|
struct ivtv_stream *s;
|
|
|
|
|
2010-02-11 01:34:46 +07:00
|
|
|
ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, 2, data);
|
2007-07-29 05:45:50 +07:00
|
|
|
IVTV_DEBUG_HI_IRQ("ENC DMA COMPLETE %x %d (%d)\n", data[0], data[1], itv->cur_dma_stream);
|
2008-04-23 00:42:16 +07:00
|
|
|
|
|
|
|
del_timer(&itv->dma_timer);
|
|
|
|
|
|
|
|
if (itv->cur_dma_stream < 0)
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
return;
|
2008-04-23 00:42:16 +07:00
|
|
|
|
2007-07-29 05:45:50 +07:00
|
|
|
s = &itv->streams[itv->cur_dma_stream];
|
|
|
|
ivtv_stream_sync_for_cpu(s);
|
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
if (data[0] & 0x18) {
|
2007-07-29 05:45:50 +07:00
|
|
|
IVTV_DEBUG_WARN("ENC DMA ERROR %x (offset %08x, xfer %d of %d, retry %d)\n", data[0],
|
|
|
|
s->dma_offset, s->sg_processed, s->sg_processing_size, itv->dma_retries);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
|
2007-07-29 05:45:50 +07:00
|
|
|
if (itv->dma_retries == 3) {
|
2007-08-19 01:48:42 +07:00
|
|
|
/* Too many retries, give up on this frame */
|
2007-07-29 05:45:50 +07:00
|
|
|
itv->dma_retries = 0;
|
2007-08-19 01:48:42 +07:00
|
|
|
s->sg_processed = s->sg_processing_size;
|
2007-07-29 05:45:50 +07:00
|
|
|
}
|
|
|
|
else {
|
|
|
|
/* Retry, starting with the first xfer segment.
|
|
|
|
Just retrying the current segment is not sufficient. */
|
|
|
|
s->sg_processed = 0;
|
|
|
|
itv->dma_retries++;
|
|
|
|
}
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
if (s->sg_processed < s->sg_processing_size) {
|
|
|
|
/* DMA next buffer */
|
|
|
|
ivtv_dma_enc_start_xfer(s);
|
|
|
|
return;
|
|
|
|
}
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
clear_bit(IVTV_F_I_DMA, &itv->i_flags);
|
|
|
|
itv->cur_dma_stream = -1;
|
|
|
|
dma_post(s);
|
|
|
|
if (test_and_clear_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags)) {
|
|
|
|
s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
|
|
|
|
dma_post(s);
|
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
s->sg_processing_size = 0;
|
|
|
|
s->sg_processed = 0;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
wake_up(&itv->dma_waitq);
|
|
|
|
}
|
|
|
|
|
2007-05-20 00:07:16 +07:00
|
|
|
static void ivtv_irq_enc_pio_complete(struct ivtv *itv)
|
|
|
|
{
|
|
|
|
struct ivtv_stream *s;
|
|
|
|
|
|
|
|
if (itv->cur_pio_stream < 0 || itv->cur_pio_stream >= IVTV_MAX_STREAMS) {
|
|
|
|
itv->cur_pio_stream = -1;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
s = &itv->streams[itv->cur_pio_stream];
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_IRQ("ENC PIO COMPLETE %s\n", s->name);
|
2007-05-20 00:07:16 +07:00
|
|
|
clear_bit(IVTV_F_I_PIO, &itv->i_flags);
|
|
|
|
itv->cur_pio_stream = -1;
|
|
|
|
dma_post(s);
|
|
|
|
if (s->type == IVTV_ENC_STREAM_TYPE_MPG)
|
|
|
|
ivtv_vapi(itv, CX2341X_ENC_SCHED_DMA_TO_HOST, 3, 0, 0, 0);
|
|
|
|
else if (s->type == IVTV_ENC_STREAM_TYPE_YUV)
|
|
|
|
ivtv_vapi(itv, CX2341X_ENC_SCHED_DMA_TO_HOST, 3, 0, 0, 1);
|
|
|
|
else if (s->type == IVTV_ENC_STREAM_TYPE_PCM)
|
|
|
|
ivtv_vapi(itv, CX2341X_ENC_SCHED_DMA_TO_HOST, 3, 0, 0, 2);
|
|
|
|
clear_bit(IVTV_F_I_PIO, &itv->i_flags);
|
|
|
|
if (test_and_clear_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags)) {
|
|
|
|
s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
|
|
|
|
dma_post(s);
|
|
|
|
}
|
|
|
|
wake_up(&itv->dma_waitq);
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
static void ivtv_irq_dma_err(struct ivtv *itv)
|
|
|
|
{
|
|
|
|
u32 data[CX2341X_MBOX_MAX_DATA];
|
[media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
After upgrading the kernel from stock Ubuntu 7.10 to
10.04, with no hardware changes, I started getting the dreaded DMA
TIMEOUT errors, followed by inability to encode until the machine was
rebooted.
I came across a post from Andy in March
(http://www.gossamer-threads.com/lists/ivtv/users/40943#40943) where he
speculates that perhaps the corrective actions being taken after a DMA
ERROR are not sufficient to recover the situation. After some testing
I suspect that this is indeed the case, and that in fact the corrective
action may be what hangs the card's DMA engine, rather than the
original error.
Specifically these DMA ERROR IRQs seem to present with two different
values in the IVTV_REG_DMASTATUS register: 0x11 and 0x13. The current
corrective action is to clear that status register back to 0x01 or
0x03, and then issue the next DMA request. In the case of a 0x13 this
seems to result in a minor glitch in the encoded stream due to the
failed transfer that was not retried, but otherwise things continue OK.
In the case of a 0x11 the card's DMA write engine is never heard from
again, and a DMA TIMEOUT follows shortly after. 0x11 is the killer.
I suspect that the two cases need to be handled differently. The
difference is in bit 1 (0x02), which is set when the error is about to
be successfully recovered, and clear when things are about to go bad.
Bit 1 of DMASTATUS is described differently in different places either
as a positive "write finished", or an inverted "write busy". If we
take the first definition, then when an error arises with state 0x11,
it means that the write did not complete. It makes sense to start a
new transfer, as in the current code. But if we take the second
definition, then 0x11 means "an error but the write engine is still
busy". Trying to feed it a new transfer in this situation might not be
a good idea.
As an experiment, I added code to ignore the DMA ERROR IRQ if DMASTATUS
is 0x11. I.e., don't start a new transfer, don't clear our flags, etc.
The hope was that the card would complete the transfer and issue a ENC
DMA COMPLETE, either successfully or with an error condition there.
However the card still hung.
The only remaining corrective action being taken with a 0x11 status was
then the write back to the status register to clear the error, i.e.
DMASTATUS = DMASTATUS & ~3. This would have the effect of clearing the
error bit 4, while leaving the lower bits indicating DMA write busy.
Strangely enough, removing this write to the status register solved the
problem! If the DMA ERROR IRQ with DMASTATUS=0x11 is completely
ignored, with no corrective action at all, then the card will complete
the transfer and issue a new IRQ. If the status register is written to
when it has the value 0x11, then the DMA engine hangs. Perhaps it's
illegal to write to
DMASTATUS while the read or write busy bit is set? At any rate, it
appears that the current corrective action is indeed making things
worse rather than better.
I put together a patch that modifies ivtv_irq_dma_err to do the
following:
- Don't write back to IVTV_REG_DMASTATUS.
- If write-busy is asserted, leave the card alone. Just extend the
timeout slightly.
- If write-busy is de-asserted, retry the current transfer.
This has completely fixed my DMA TIMEOUT woes. DMA ERR events still
occur, but now they seem to be correctly handled. 0x11 events no
longer hang the card, and 0x13 events no longer result in a glitch in
the stream, as the failed transfer is retried. I'm happy.
I've inlined the patch below in case it is of interest. As described
above, I have a theory about why it works (based on a different
interpretation of bit 1 of DMASTATUS), but I can't guarantee that my
theory is correct. There may be another explanation, or it may be a
fluke. Maybe ignoring that IRQ entirely would be equally effective?
Maybe the status register read/writeback sequence is race condition if
the card changes it in the mean time? Also as I am using a PVR-150
only, I have not been able to test it on other cards, which may be
especially relevant for 350s that support concurrent decoding.
Hopefully the patch does not break the DMA READ path.
Mike
[awalls@md.metrocast.net: Modified patch to add a verbose comment, make minor
brace reformats, and clear the error flags in the IVTV_REG_DMASTATUS iff both
read and write DMA were not in progress. Mike's conjecture about a race
condition with the writeback is correct; it can confuse the DMA engine.]
[Comment and analysis from the ML post by Michael <mike@rsy.com>]
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-26 11:56:34 +07:00
|
|
|
u32 status;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
del_timer(&itv->dma_timer);
|
[media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
After upgrading the kernel from stock Ubuntu 7.10 to
10.04, with no hardware changes, I started getting the dreaded DMA
TIMEOUT errors, followed by inability to encode until the machine was
rebooted.
I came across a post from Andy in March
(http://www.gossamer-threads.com/lists/ivtv/users/40943#40943) where he
speculates that perhaps the corrective actions being taken after a DMA
ERROR are not sufficient to recover the situation. After some testing
I suspect that this is indeed the case, and that in fact the corrective
action may be what hangs the card's DMA engine, rather than the
original error.
Specifically these DMA ERROR IRQs seem to present with two different
values in the IVTV_REG_DMASTATUS register: 0x11 and 0x13. The current
corrective action is to clear that status register back to 0x01 or
0x03, and then issue the next DMA request. In the case of a 0x13 this
seems to result in a minor glitch in the encoded stream due to the
failed transfer that was not retried, but otherwise things continue OK.
In the case of a 0x11 the card's DMA write engine is never heard from
again, and a DMA TIMEOUT follows shortly after. 0x11 is the killer.
I suspect that the two cases need to be handled differently. The
difference is in bit 1 (0x02), which is set when the error is about to
be successfully recovered, and clear when things are about to go bad.
Bit 1 of DMASTATUS is described differently in different places either
as a positive "write finished", or an inverted "write busy". If we
take the first definition, then when an error arises with state 0x11,
it means that the write did not complete. It makes sense to start a
new transfer, as in the current code. But if we take the second
definition, then 0x11 means "an error but the write engine is still
busy". Trying to feed it a new transfer in this situation might not be
a good idea.
As an experiment, I added code to ignore the DMA ERROR IRQ if DMASTATUS
is 0x11. I.e., don't start a new transfer, don't clear our flags, etc.
The hope was that the card would complete the transfer and issue a ENC
DMA COMPLETE, either successfully or with an error condition there.
However the card still hung.
The only remaining corrective action being taken with a 0x11 status was
then the write back to the status register to clear the error, i.e.
DMASTATUS = DMASTATUS & ~3. This would have the effect of clearing the
error bit 4, while leaving the lower bits indicating DMA write busy.
Strangely enough, removing this write to the status register solved the
problem! If the DMA ERROR IRQ with DMASTATUS=0x11 is completely
ignored, with no corrective action at all, then the card will complete
the transfer and issue a new IRQ. If the status register is written to
when it has the value 0x11, then the DMA engine hangs. Perhaps it's
illegal to write to
DMASTATUS while the read or write busy bit is set? At any rate, it
appears that the current corrective action is indeed making things
worse rather than better.
I put together a patch that modifies ivtv_irq_dma_err to do the
following:
- Don't write back to IVTV_REG_DMASTATUS.
- If write-busy is asserted, leave the card alone. Just extend the
timeout slightly.
- If write-busy is de-asserted, retry the current transfer.
This has completely fixed my DMA TIMEOUT woes. DMA ERR events still
occur, but now they seem to be correctly handled. 0x11 events no
longer hang the card, and 0x13 events no longer result in a glitch in
the stream, as the failed transfer is retried. I'm happy.
I've inlined the patch below in case it is of interest. As described
above, I have a theory about why it works (based on a different
interpretation of bit 1 of DMASTATUS), but I can't guarantee that my
theory is correct. There may be another explanation, or it may be a
fluke. Maybe ignoring that IRQ entirely would be equally effective?
Maybe the status register read/writeback sequence is race condition if
the card changes it in the mean time? Also as I am using a PVR-150
only, I have not been able to test it on other cards, which may be
especially relevant for 350s that support concurrent decoding.
Hopefully the patch does not break the DMA READ path.
Mike
[awalls@md.metrocast.net: Modified patch to add a verbose comment, make minor
brace reformats, and clear the error flags in the IVTV_REG_DMASTATUS iff both
read and write DMA were not in progress. Mike's conjecture about a race
condition with the writeback is correct; it can confuse the DMA engine.]
[Comment and analysis from the ML post by Michael <mike@rsy.com>]
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-26 11:56:34 +07:00
|
|
|
|
2010-02-11 01:34:46 +07:00
|
|
|
ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, 2, data);
|
[media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
After upgrading the kernel from stock Ubuntu 7.10 to
10.04, with no hardware changes, I started getting the dreaded DMA
TIMEOUT errors, followed by inability to encode until the machine was
rebooted.
I came across a post from Andy in March
(http://www.gossamer-threads.com/lists/ivtv/users/40943#40943) where he
speculates that perhaps the corrective actions being taken after a DMA
ERROR are not sufficient to recover the situation. After some testing
I suspect that this is indeed the case, and that in fact the corrective
action may be what hangs the card's DMA engine, rather than the
original error.
Specifically these DMA ERROR IRQs seem to present with two different
values in the IVTV_REG_DMASTATUS register: 0x11 and 0x13. The current
corrective action is to clear that status register back to 0x01 or
0x03, and then issue the next DMA request. In the case of a 0x13 this
seems to result in a minor glitch in the encoded stream due to the
failed transfer that was not retried, but otherwise things continue OK.
In the case of a 0x11 the card's DMA write engine is never heard from
again, and a DMA TIMEOUT follows shortly after. 0x11 is the killer.
I suspect that the two cases need to be handled differently. The
difference is in bit 1 (0x02), which is set when the error is about to
be successfully recovered, and clear when things are about to go bad.
Bit 1 of DMASTATUS is described differently in different places either
as a positive "write finished", or an inverted "write busy". If we
take the first definition, then when an error arises with state 0x11,
it means that the write did not complete. It makes sense to start a
new transfer, as in the current code. But if we take the second
definition, then 0x11 means "an error but the write engine is still
busy". Trying to feed it a new transfer in this situation might not be
a good idea.
As an experiment, I added code to ignore the DMA ERROR IRQ if DMASTATUS
is 0x11. I.e., don't start a new transfer, don't clear our flags, etc.
The hope was that the card would complete the transfer and issue a ENC
DMA COMPLETE, either successfully or with an error condition there.
However the card still hung.
The only remaining corrective action being taken with a 0x11 status was
then the write back to the status register to clear the error, i.e.
DMASTATUS = DMASTATUS & ~3. This would have the effect of clearing the
error bit 4, while leaving the lower bits indicating DMA write busy.
Strangely enough, removing this write to the status register solved the
problem! If the DMA ERROR IRQ with DMASTATUS=0x11 is completely
ignored, with no corrective action at all, then the card will complete
the transfer and issue a new IRQ. If the status register is written to
when it has the value 0x11, then the DMA engine hangs. Perhaps it's
illegal to write to
DMASTATUS while the read or write busy bit is set? At any rate, it
appears that the current corrective action is indeed making things
worse rather than better.
I put together a patch that modifies ivtv_irq_dma_err to do the
following:
- Don't write back to IVTV_REG_DMASTATUS.
- If write-busy is asserted, leave the card alone. Just extend the
timeout slightly.
- If write-busy is de-asserted, retry the current transfer.
This has completely fixed my DMA TIMEOUT woes. DMA ERR events still
occur, but now they seem to be correctly handled. 0x11 events no
longer hang the card, and 0x13 events no longer result in a glitch in
the stream, as the failed transfer is retried. I'm happy.
I've inlined the patch below in case it is of interest. As described
above, I have a theory about why it works (based on a different
interpretation of bit 1 of DMASTATUS), but I can't guarantee that my
theory is correct. There may be another explanation, or it may be a
fluke. Maybe ignoring that IRQ entirely would be equally effective?
Maybe the status register read/writeback sequence is race condition if
the card changes it in the mean time? Also as I am using a PVR-150
only, I have not been able to test it on other cards, which may be
especially relevant for 350s that support concurrent decoding.
Hopefully the patch does not break the DMA READ path.
Mike
[awalls@md.metrocast.net: Modified patch to add a verbose comment, make minor
brace reformats, and clear the error flags in the IVTV_REG_DMASTATUS iff both
read and write DMA were not in progress. Mike's conjecture about a race
condition with the writeback is correct; it can confuse the DMA engine.]
[Comment and analysis from the ML post by Michael <mike@rsy.com>]
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-26 11:56:34 +07:00
|
|
|
status = read_reg(IVTV_REG_DMASTATUS);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
IVTV_DEBUG_WARN("DMA ERROR %08x %08x %08x %d\n", data[0], data[1],
|
[media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
After upgrading the kernel from stock Ubuntu 7.10 to
10.04, with no hardware changes, I started getting the dreaded DMA
TIMEOUT errors, followed by inability to encode until the machine was
rebooted.
I came across a post from Andy in March
(http://www.gossamer-threads.com/lists/ivtv/users/40943#40943) where he
speculates that perhaps the corrective actions being taken after a DMA
ERROR are not sufficient to recover the situation. After some testing
I suspect that this is indeed the case, and that in fact the corrective
action may be what hangs the card's DMA engine, rather than the
original error.
Specifically these DMA ERROR IRQs seem to present with two different
values in the IVTV_REG_DMASTATUS register: 0x11 and 0x13. The current
corrective action is to clear that status register back to 0x01 or
0x03, and then issue the next DMA request. In the case of a 0x13 this
seems to result in a minor glitch in the encoded stream due to the
failed transfer that was not retried, but otherwise things continue OK.
In the case of a 0x11 the card's DMA write engine is never heard from
again, and a DMA TIMEOUT follows shortly after. 0x11 is the killer.
I suspect that the two cases need to be handled differently. The
difference is in bit 1 (0x02), which is set when the error is about to
be successfully recovered, and clear when things are about to go bad.
Bit 1 of DMASTATUS is described differently in different places either
as a positive "write finished", or an inverted "write busy". If we
take the first definition, then when an error arises with state 0x11,
it means that the write did not complete. It makes sense to start a
new transfer, as in the current code. But if we take the second
definition, then 0x11 means "an error but the write engine is still
busy". Trying to feed it a new transfer in this situation might not be
a good idea.
As an experiment, I added code to ignore the DMA ERROR IRQ if DMASTATUS
is 0x11. I.e., don't start a new transfer, don't clear our flags, etc.
The hope was that the card would complete the transfer and issue a ENC
DMA COMPLETE, either successfully or with an error condition there.
However the card still hung.
The only remaining corrective action being taken with a 0x11 status was
then the write back to the status register to clear the error, i.e.
DMASTATUS = DMASTATUS & ~3. This would have the effect of clearing the
error bit 4, while leaving the lower bits indicating DMA write busy.
Strangely enough, removing this write to the status register solved the
problem! If the DMA ERROR IRQ with DMASTATUS=0x11 is completely
ignored, with no corrective action at all, then the card will complete
the transfer and issue a new IRQ. If the status register is written to
when it has the value 0x11, then the DMA engine hangs. Perhaps it's
illegal to write to
DMASTATUS while the read or write busy bit is set? At any rate, it
appears that the current corrective action is indeed making things
worse rather than better.
I put together a patch that modifies ivtv_irq_dma_err to do the
following:
- Don't write back to IVTV_REG_DMASTATUS.
- If write-busy is asserted, leave the card alone. Just extend the
timeout slightly.
- If write-busy is de-asserted, retry the current transfer.
This has completely fixed my DMA TIMEOUT woes. DMA ERR events still
occur, but now they seem to be correctly handled. 0x11 events no
longer hang the card, and 0x13 events no longer result in a glitch in
the stream, as the failed transfer is retried. I'm happy.
I've inlined the patch below in case it is of interest. As described
above, I have a theory about why it works (based on a different
interpretation of bit 1 of DMASTATUS), but I can't guarantee that my
theory is correct. There may be another explanation, or it may be a
fluke. Maybe ignoring that IRQ entirely would be equally effective?
Maybe the status register read/writeback sequence is race condition if
the card changes it in the mean time? Also as I am using a PVR-150
only, I have not been able to test it on other cards, which may be
especially relevant for 350s that support concurrent decoding.
Hopefully the patch does not break the DMA READ path.
Mike
[awalls@md.metrocast.net: Modified patch to add a verbose comment, make minor
brace reformats, and clear the error flags in the IVTV_REG_DMASTATUS iff both
read and write DMA were not in progress. Mike's conjecture about a race
condition with the writeback is correct; it can confuse the DMA engine.]
[Comment and analysis from the ML post by Michael <mike@rsy.com>]
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-26 11:56:34 +07:00
|
|
|
status, itv->cur_dma_stream);
|
|
|
|
/*
|
|
|
|
* We do *not* write back to the IVTV_REG_DMASTATUS register to
|
|
|
|
* clear the error status, if either the encoder write (0x02) or
|
|
|
|
* decoder read (0x01) bus master DMA operation do not indicate
|
|
|
|
* completed. We can race with the DMA engine, which may have
|
|
|
|
* transitioned to completed status *after* we read the register.
|
|
|
|
* Setting a IVTV_REG_DMASTATUS flag back to "busy" status, after the
|
|
|
|
* DMA engine has completed, will cause the DMA engine to stop working.
|
|
|
|
*/
|
|
|
|
status &= 0x3;
|
|
|
|
if (status == 0x3)
|
|
|
|
write_reg(status, IVTV_REG_DMASTATUS);
|
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) &&
|
|
|
|
itv->cur_dma_stream >= 0 && itv->cur_dma_stream < IVTV_MAX_STREAMS) {
|
|
|
|
struct ivtv_stream *s = &itv->streams[itv->cur_dma_stream];
|
|
|
|
|
[media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
After upgrading the kernel from stock Ubuntu 7.10 to
10.04, with no hardware changes, I started getting the dreaded DMA
TIMEOUT errors, followed by inability to encode until the machine was
rebooted.
I came across a post from Andy in March
(http://www.gossamer-threads.com/lists/ivtv/users/40943#40943) where he
speculates that perhaps the corrective actions being taken after a DMA
ERROR are not sufficient to recover the situation. After some testing
I suspect that this is indeed the case, and that in fact the corrective
action may be what hangs the card's DMA engine, rather than the
original error.
Specifically these DMA ERROR IRQs seem to present with two different
values in the IVTV_REG_DMASTATUS register: 0x11 and 0x13. The current
corrective action is to clear that status register back to 0x01 or
0x03, and then issue the next DMA request. In the case of a 0x13 this
seems to result in a minor glitch in the encoded stream due to the
failed transfer that was not retried, but otherwise things continue OK.
In the case of a 0x11 the card's DMA write engine is never heard from
again, and a DMA TIMEOUT follows shortly after. 0x11 is the killer.
I suspect that the two cases need to be handled differently. The
difference is in bit 1 (0x02), which is set when the error is about to
be successfully recovered, and clear when things are about to go bad.
Bit 1 of DMASTATUS is described differently in different places either
as a positive "write finished", or an inverted "write busy". If we
take the first definition, then when an error arises with state 0x11,
it means that the write did not complete. It makes sense to start a
new transfer, as in the current code. But if we take the second
definition, then 0x11 means "an error but the write engine is still
busy". Trying to feed it a new transfer in this situation might not be
a good idea.
As an experiment, I added code to ignore the DMA ERROR IRQ if DMASTATUS
is 0x11. I.e., don't start a new transfer, don't clear our flags, etc.
The hope was that the card would complete the transfer and issue a ENC
DMA COMPLETE, either successfully or with an error condition there.
However the card still hung.
The only remaining corrective action being taken with a 0x11 status was
then the write back to the status register to clear the error, i.e.
DMASTATUS = DMASTATUS & ~3. This would have the effect of clearing the
error bit 4, while leaving the lower bits indicating DMA write busy.
Strangely enough, removing this write to the status register solved the
problem! If the DMA ERROR IRQ with DMASTATUS=0x11 is completely
ignored, with no corrective action at all, then the card will complete
the transfer and issue a new IRQ. If the status register is written to
when it has the value 0x11, then the DMA engine hangs. Perhaps it's
illegal to write to
DMASTATUS while the read or write busy bit is set? At any rate, it
appears that the current corrective action is indeed making things
worse rather than better.
I put together a patch that modifies ivtv_irq_dma_err to do the
following:
- Don't write back to IVTV_REG_DMASTATUS.
- If write-busy is asserted, leave the card alone. Just extend the
timeout slightly.
- If write-busy is de-asserted, retry the current transfer.
This has completely fixed my DMA TIMEOUT woes. DMA ERR events still
occur, but now they seem to be correctly handled. 0x11 events no
longer hang the card, and 0x13 events no longer result in a glitch in
the stream, as the failed transfer is retried. I'm happy.
I've inlined the patch below in case it is of interest. As described
above, I have a theory about why it works (based on a different
interpretation of bit 1 of DMASTATUS), but I can't guarantee that my
theory is correct. There may be another explanation, or it may be a
fluke. Maybe ignoring that IRQ entirely would be equally effective?
Maybe the status register read/writeback sequence is race condition if
the card changes it in the mean time? Also as I am using a PVR-150
only, I have not been able to test it on other cards, which may be
especially relevant for 350s that support concurrent decoding.
Hopefully the patch does not break the DMA READ path.
Mike
[awalls@md.metrocast.net: Modified patch to add a verbose comment, make minor
brace reformats, and clear the error flags in the IVTV_REG_DMASTATUS iff both
read and write DMA were not in progress. Mike's conjecture about a race
condition with the writeback is correct; it can confuse the DMA engine.]
[Comment and analysis from the ML post by Michael <mike@rsy.com>]
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-26 11:56:34 +07:00
|
|
|
if (s->type >= IVTV_DEC_STREAM_TYPE_MPG) {
|
|
|
|
/* retry */
|
|
|
|
/*
|
|
|
|
* FIXME - handle cases of DMA error similar to
|
|
|
|
* encoder below, except conditioned on status & 0x1
|
|
|
|
*/
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
ivtv_dma_dec_start(s);
|
[media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
After upgrading the kernel from stock Ubuntu 7.10 to
10.04, with no hardware changes, I started getting the dreaded DMA
TIMEOUT errors, followed by inability to encode until the machine was
rebooted.
I came across a post from Andy in March
(http://www.gossamer-threads.com/lists/ivtv/users/40943#40943) where he
speculates that perhaps the corrective actions being taken after a DMA
ERROR are not sufficient to recover the situation. After some testing
I suspect that this is indeed the case, and that in fact the corrective
action may be what hangs the card's DMA engine, rather than the
original error.
Specifically these DMA ERROR IRQs seem to present with two different
values in the IVTV_REG_DMASTATUS register: 0x11 and 0x13. The current
corrective action is to clear that status register back to 0x01 or
0x03, and then issue the next DMA request. In the case of a 0x13 this
seems to result in a minor glitch in the encoded stream due to the
failed transfer that was not retried, but otherwise things continue OK.
In the case of a 0x11 the card's DMA write engine is never heard from
again, and a DMA TIMEOUT follows shortly after. 0x11 is the killer.
I suspect that the two cases need to be handled differently. The
difference is in bit 1 (0x02), which is set when the error is about to
be successfully recovered, and clear when things are about to go bad.
Bit 1 of DMASTATUS is described differently in different places either
as a positive "write finished", or an inverted "write busy". If we
take the first definition, then when an error arises with state 0x11,
it means that the write did not complete. It makes sense to start a
new transfer, as in the current code. But if we take the second
definition, then 0x11 means "an error but the write engine is still
busy". Trying to feed it a new transfer in this situation might not be
a good idea.
As an experiment, I added code to ignore the DMA ERROR IRQ if DMASTATUS
is 0x11. I.e., don't start a new transfer, don't clear our flags, etc.
The hope was that the card would complete the transfer and issue a ENC
DMA COMPLETE, either successfully or with an error condition there.
However the card still hung.
The only remaining corrective action being taken with a 0x11 status was
then the write back to the status register to clear the error, i.e.
DMASTATUS = DMASTATUS & ~3. This would have the effect of clearing the
error bit 4, while leaving the lower bits indicating DMA write busy.
Strangely enough, removing this write to the status register solved the
problem! If the DMA ERROR IRQ with DMASTATUS=0x11 is completely
ignored, with no corrective action at all, then the card will complete
the transfer and issue a new IRQ. If the status register is written to
when it has the value 0x11, then the DMA engine hangs. Perhaps it's
illegal to write to
DMASTATUS while the read or write busy bit is set? At any rate, it
appears that the current corrective action is indeed making things
worse rather than better.
I put together a patch that modifies ivtv_irq_dma_err to do the
following:
- Don't write back to IVTV_REG_DMASTATUS.
- If write-busy is asserted, leave the card alone. Just extend the
timeout slightly.
- If write-busy is de-asserted, retry the current transfer.
This has completely fixed my DMA TIMEOUT woes. DMA ERR events still
occur, but now they seem to be correctly handled. 0x11 events no
longer hang the card, and 0x13 events no longer result in a glitch in
the stream, as the failed transfer is retried. I'm happy.
I've inlined the patch below in case it is of interest. As described
above, I have a theory about why it works (based on a different
interpretation of bit 1 of DMASTATUS), but I can't guarantee that my
theory is correct. There may be another explanation, or it may be a
fluke. Maybe ignoring that IRQ entirely would be equally effective?
Maybe the status register read/writeback sequence is race condition if
the card changes it in the mean time? Also as I am using a PVR-150
only, I have not been able to test it on other cards, which may be
especially relevant for 350s that support concurrent decoding.
Hopefully the patch does not break the DMA READ path.
Mike
[awalls@md.metrocast.net: Modified patch to add a verbose comment, make minor
brace reformats, and clear the error flags in the IVTV_REG_DMASTATUS iff both
read and write DMA were not in progress. Mike's conjecture about a race
condition with the writeback is correct; it can confuse the DMA engine.]
[Comment and analysis from the ML post by Michael <mike@rsy.com>]
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-26 11:56:34 +07:00
|
|
|
return;
|
|
|
|
} else {
|
|
|
|
if ((status & 0x2) == 0) {
|
|
|
|
/*
|
|
|
|
* CX2341x Bus Master DMA write is ongoing.
|
|
|
|
* Reset the timer and let it complete.
|
|
|
|
*/
|
|
|
|
itv->dma_timer.expires =
|
|
|
|
jiffies + msecs_to_jiffies(600);
|
|
|
|
add_timer(&itv->dma_timer);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (itv->dma_retries < 3) {
|
|
|
|
/*
|
|
|
|
* CX2341x Bus Master DMA write has ended.
|
|
|
|
* Retry the write, starting with the first
|
|
|
|
* xfer segment. Just retrying the current
|
|
|
|
* segment is not sufficient.
|
|
|
|
*/
|
|
|
|
s->sg_processed = 0;
|
|
|
|
itv->dma_retries++;
|
|
|
|
ivtv_dma_enc_start_xfer(s);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/* Too many retries, give up on this one */
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
2007-07-29 05:45:50 +07:00
|
|
|
if (test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
|
|
|
|
ivtv_udma_start(itv);
|
|
|
|
return;
|
|
|
|
}
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
clear_bit(IVTV_F_I_UDMA, &itv->i_flags);
|
|
|
|
clear_bit(IVTV_F_I_DMA, &itv->i_flags);
|
|
|
|
itv->cur_dma_stream = -1;
|
|
|
|
wake_up(&itv->dma_waitq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ivtv_irq_enc_start_cap(struct ivtv *itv)
|
|
|
|
{
|
|
|
|
u32 data[CX2341X_MBOX_MAX_DATA];
|
|
|
|
struct ivtv_stream *s;
|
|
|
|
|
|
|
|
/* Get DMA destination and size arguments from card */
|
2010-02-11 01:34:46 +07:00
|
|
|
ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA, 7, data);
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_IRQ("ENC START CAP %d: %08x %08x\n", data[0], data[1], data[2]);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
if (data[0] > 2 || data[1] == 0 || data[2] == 0) {
|
|
|
|
IVTV_DEBUG_WARN("Unknown input: %08x %08x %08x\n",
|
|
|
|
data[0], data[1], data[2]);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
s = &itv->streams[ivtv_stream_map[data[0]]];
|
|
|
|
if (!stream_enc_dma_append(s, data)) {
|
2007-05-20 00:07:16 +07:00
|
|
|
set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ivtv_irq_enc_vbi_cap(struct ivtv *itv)
|
|
|
|
{
|
|
|
|
u32 data[CX2341X_MBOX_MAX_DATA];
|
|
|
|
struct ivtv_stream *s;
|
|
|
|
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_IRQ("ENC START VBI CAP\n");
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
|
|
|
|
|
2008-09-04 02:47:14 +07:00
|
|
|
if (!stream_enc_dma_append(s, data))
|
2007-05-20 00:07:16 +07:00
|
|
|
set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
|
2007-05-20 00:07:16 +07:00
|
|
|
static void ivtv_irq_dec_vbi_reinsert(struct ivtv *itv)
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
{
|
|
|
|
u32 data[CX2341X_MBOX_MAX_DATA];
|
|
|
|
struct ivtv_stream *s = &itv->streams[IVTV_DEC_STREAM_TYPE_VBI];
|
|
|
|
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_IRQ("DEC VBI REINSERT\n");
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
if (test_bit(IVTV_F_S_CLAIMED, &s->s_flags) &&
|
|
|
|
!stream_enc_dma_append(s, data)) {
|
2007-05-20 00:07:16 +07:00
|
|
|
set_bit(IVTV_F_S_PIO_PENDING, &s->s_flags);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ivtv_irq_dec_data_req(struct ivtv *itv)
|
|
|
|
{
|
|
|
|
u32 data[CX2341X_MBOX_MAX_DATA];
|
|
|
|
struct ivtv_stream *s;
|
|
|
|
|
|
|
|
/* YUV or MPG */
|
|
|
|
|
|
|
|
if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) {
|
2010-02-11 01:34:46 +07:00
|
|
|
ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, 2, data);
|
V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the IVTV_IOC_DMA_FRAME framework
Previously, all yuv data written to /dev/video48 had only basic support with
no double buffering to avoid display tearing.
With this patch, yuv frames written to video48 are now handled by the existing
IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to
avoid tearing, and honour scaling mode & field order options. Unlike the
proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the
V4L2 API.
Due to mpeg & yuv output restrictions being different, their V4L2 output
controls have been separated. To control the yuv output, the V4L2 calls must
be done via video48.
If the ivtvfb module is loaded, there will be one side effect to this merge.
The yuv output window will be constrained to the visible framebuffer area. In
the event that a virtual framebuffer size is being used, the limit to the
output size will be the virtual dimensions, but only the portion that falls
within the currently visible area of the framebuffer will be shown.
Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720
pixels wide. However the height must only be padded up the nearest multiple
of 32. This would mean an image of 102 lines must be padded to 128. As long
as the true source image size is given, the padding will not be visible in
the final output.
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-06 00:27:09 +07:00
|
|
|
itv->dma_data_req_size =
|
|
|
|
1080 * ((itv->yuv_info.v4l2_src_h + 31) & ~31);
|
|
|
|
itv->dma_data_req_offset = data[1];
|
|
|
|
if (atomic_read(&itv->yuv_info.next_dma_frame) >= 0)
|
|
|
|
ivtv_yuv_frame_complete(itv);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
s = &itv->streams[IVTV_DEC_STREAM_TYPE_YUV];
|
|
|
|
}
|
|
|
|
else {
|
2010-02-11 01:34:46 +07:00
|
|
|
ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, 3, data);
|
2007-12-08 20:35:06 +07:00
|
|
|
itv->dma_data_req_size = min_t(u32, data[2], 0x10000);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
itv->dma_data_req_offset = data[1];
|
|
|
|
s = &itv->streams[IVTV_DEC_STREAM_TYPE_MPG];
|
|
|
|
}
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_IRQ("DEC DATA REQ %s: %d %08x %u\n", s->name, s->q_full.bytesused,
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
itv->dma_data_req_offset, itv->dma_data_req_size);
|
|
|
|
if (itv->dma_data_req_size == 0 || s->q_full.bytesused < itv->dma_data_req_size) {
|
|
|
|
set_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags);
|
|
|
|
}
|
|
|
|
else {
|
V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the IVTV_IOC_DMA_FRAME framework
Previously, all yuv data written to /dev/video48 had only basic support with
no double buffering to avoid display tearing.
With this patch, yuv frames written to video48 are now handled by the existing
IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to
avoid tearing, and honour scaling mode & field order options. Unlike the
proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the
V4L2 API.
Due to mpeg & yuv output restrictions being different, their V4L2 output
controls have been separated. To control the yuv output, the V4L2 calls must
be done via video48.
If the ivtvfb module is loaded, there will be one side effect to this merge.
The yuv output window will be constrained to the visible framebuffer area. In
the event that a virtual framebuffer size is being used, the limit to the
output size will be the virtual dimensions, but only the portion that falls
within the currently visible area of the framebuffer will be shown.
Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720
pixels wide. However the height must only be padded up the nearest multiple
of 32. This would mean an image of 102 lines must be padded to 128. As long
as the true source image size is given, the padding will not be visible in
the final output.
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-06 00:27:09 +07:00
|
|
|
if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags))
|
|
|
|
ivtv_yuv_setup_stream_frame(itv);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
clear_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags);
|
|
|
|
ivtv_queue_move(s, &s->q_full, NULL, &s->q_predma, itv->dma_data_req_size);
|
|
|
|
ivtv_dma_stream_dec_prepare(s, itv->dma_data_req_offset + IVTV_DECODER_OFFSET, 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ivtv_irq_vsync(struct ivtv *itv)
|
|
|
|
{
|
|
|
|
/* The vsync interrupt is unusual in that it won't clear until
|
|
|
|
* the end of the first line for the current field, at which
|
|
|
|
* point it clears itself. This can result in repeated vsync
|
|
|
|
* interrupts, or a missed vsync. Read some of the registers
|
|
|
|
* to determine the line being displayed and ensure we handle
|
|
|
|
* one vsync per frame.
|
|
|
|
*/
|
2010-03-14 06:37:25 +07:00
|
|
|
unsigned int frame = read_reg(IVTV_REG_DEC_LINE_FIELD) & 1;
|
2007-10-21 00:52:55 +07:00
|
|
|
struct yuv_playback_info *yi = &itv->yuv_info;
|
2008-10-09 22:04:23 +07:00
|
|
|
int last_dma_frame = atomic_read(&yi->next_dma_frame);
|
2007-10-23 00:24:26 +07:00
|
|
|
struct yuv_frame_info *f = &yi->new_frame_info[last_dma_frame];
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
if (0) IVTV_DEBUG_IRQ("DEC VSYNC\n");
|
|
|
|
|
2007-10-23 00:24:26 +07:00
|
|
|
if (((frame ^ f->sync_field) == 0 &&
|
|
|
|
((itv->last_vsync_field & 1) ^ f->sync_field)) ||
|
|
|
|
(frame != (itv->last_vsync_field & 1) && !f->interlaced)) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
int next_dma_frame = last_dma_frame;
|
|
|
|
|
2007-10-23 00:24:26 +07:00
|
|
|
if (!(f->interlaced && f->delay && yi->fields_lapsed < 1)) {
|
2007-10-21 00:52:55 +07:00
|
|
|
if (next_dma_frame >= 0 && next_dma_frame != atomic_read(&yi->next_fill_frame)) {
|
2007-08-03 20:01:39 +07:00
|
|
|
write_reg(yuv_offset[next_dma_frame] >> 4, 0x82c);
|
|
|
|
write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x830);
|
|
|
|
write_reg(yuv_offset[next_dma_frame] >> 4, 0x834);
|
|
|
|
write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x838);
|
2007-10-21 00:52:55 +07:00
|
|
|
next_dma_frame = (next_dma_frame + 1) % IVTV_YUV_BUFFERS;
|
|
|
|
atomic_set(&yi->next_dma_frame, next_dma_frame);
|
|
|
|
yi->fields_lapsed = -1;
|
2008-10-09 22:04:23 +07:00
|
|
|
yi->running = 1;
|
2007-08-03 20:01:39 +07:00
|
|
|
}
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
}
|
2007-08-23 21:31:57 +07:00
|
|
|
if (frame != (itv->last_vsync_field & 1)) {
|
2010-03-28 00:10:13 +07:00
|
|
|
static const struct v4l2_event evtop = {
|
|
|
|
.type = V4L2_EVENT_VSYNC,
|
|
|
|
.u.vsync.field = V4L2_FIELD_TOP,
|
|
|
|
};
|
|
|
|
static const struct v4l2_event evbottom = {
|
|
|
|
.type = V4L2_EVENT_VSYNC,
|
|
|
|
.u.vsync.field = V4L2_FIELD_BOTTOM,
|
|
|
|
};
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
struct ivtv_stream *s = ivtv_get_output_stream(itv);
|
|
|
|
|
2007-08-23 21:31:57 +07:00
|
|
|
itv->last_vsync_field += 1;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
if (frame == 0) {
|
|
|
|
clear_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags);
|
|
|
|
clear_bit(IVTV_F_I_EV_VSYNC_FIELD, &itv->i_flags);
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
set_bit(IVTV_F_I_EV_VSYNC_FIELD, &itv->i_flags);
|
|
|
|
}
|
|
|
|
if (test_bit(IVTV_F_I_EV_VSYNC_ENABLED, &itv->i_flags)) {
|
|
|
|
set_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags);
|
|
|
|
wake_up(&itv->event_waitq);
|
2010-03-28 00:10:13 +07:00
|
|
|
if (s)
|
|
|
|
wake_up(&s->waitq);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
2010-03-28 00:10:13 +07:00
|
|
|
if (s && s->vdev)
|
|
|
|
v4l2_event_queue(s->vdev, frame ? &evtop : &evbottom);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
wake_up(&itv->vsync_waitq);
|
|
|
|
|
|
|
|
/* Send VBI to saa7127 */
|
2007-08-26 00:11:23 +07:00
|
|
|
if (frame && (itv->output_mode == OUT_PASSTHROUGH ||
|
|
|
|
test_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags) ||
|
|
|
|
test_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags) ||
|
|
|
|
test_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags))) {
|
2007-03-10 16:52:02 +07:00
|
|
|
set_bit(IVTV_F_I_WORK_HANDLER_VBI, &itv->i_flags);
|
2007-05-20 00:07:16 +07:00
|
|
|
set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags);
|
2007-03-10 16:52:02 +07:00
|
|
|
}
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
/* Check if we need to update the yuv registers */
|
2008-10-09 22:04:23 +07:00
|
|
|
if (yi->running && (yi->yuv_forced_update || f->update)) {
|
2007-10-23 00:24:26 +07:00
|
|
|
if (!f->update) {
|
2008-10-09 22:04:23 +07:00
|
|
|
last_dma_frame =
|
|
|
|
(u8)(atomic_read(&yi->next_dma_frame) -
|
|
|
|
1) % IVTV_YUV_BUFFERS;
|
2007-10-23 00:24:26 +07:00
|
|
|
f = &yi->new_frame_info[last_dma_frame];
|
|
|
|
}
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
2007-10-23 00:24:26 +07:00
|
|
|
if (f->src_w) {
|
2007-10-21 00:52:55 +07:00
|
|
|
yi->update_frame = last_dma_frame;
|
2007-10-23 00:24:26 +07:00
|
|
|
f->update = 0;
|
2007-10-21 00:52:55 +07:00
|
|
|
yi->yuv_forced_update = 0;
|
2007-03-10 16:52:02 +07:00
|
|
|
set_bit(IVTV_F_I_WORK_HANDLER_YUV, &itv->i_flags);
|
2007-05-20 00:07:16 +07:00
|
|
|
set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
}
|
2007-08-03 20:01:39 +07:00
|
|
|
|
2007-10-21 00:52:55 +07:00
|
|
|
yi->fields_lapsed++;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2007-08-26 00:11:23 +07:00
|
|
|
#define IVTV_IRQ_DMA (IVTV_IRQ_DMA_READ | IVTV_IRQ_ENC_DMA_COMPLETE | IVTV_IRQ_DMA_ERR | IVTV_IRQ_ENC_START_CAP | IVTV_IRQ_ENC_VBI_CAP | IVTV_IRQ_DEC_DATA_REQ | IVTV_IRQ_DEC_VBI_RE_INSERT)
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct ivtv *itv = (struct ivtv *)dev_id;
|
|
|
|
u32 combo;
|
|
|
|
u32 stat;
|
|
|
|
int i;
|
|
|
|
u8 vsync_force = 0;
|
|
|
|
|
|
|
|
spin_lock(&itv->dma_reg_lock);
|
|
|
|
/* get contents of irq status register */
|
|
|
|
stat = read_reg(IVTV_REG_IRQSTATUS);
|
|
|
|
|
|
|
|
combo = ~itv->irqmask & stat;
|
|
|
|
|
|
|
|
/* Clear out IRQ */
|
|
|
|
if (combo) write_reg(combo, IVTV_REG_IRQSTATUS);
|
|
|
|
|
|
|
|
if (0 == combo) {
|
|
|
|
/* The vsync interrupt is unusual and clears itself. If we
|
|
|
|
* took too long, we may have missed it. Do some checks
|
|
|
|
*/
|
|
|
|
if (~itv->irqmask & IVTV_IRQ_DEC_VSYNC) {
|
|
|
|
/* vsync is enabled, see if we're in a new field */
|
2010-03-14 06:37:25 +07:00
|
|
|
if ((itv->last_vsync_field & 1) !=
|
|
|
|
(read_reg(IVTV_REG_DEC_LINE_FIELD) & 1)) {
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
/* New field, looks like we missed it */
|
2010-03-14 06:37:25 +07:00
|
|
|
IVTV_DEBUG_YUV("VSync interrupt missed %d\n",
|
|
|
|
read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
vsync_force = 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!vsync_force) {
|
|
|
|
/* No Vsync expected, wasn't for us */
|
|
|
|
spin_unlock(&itv->dma_reg_lock);
|
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Exclude interrupts noted below from the output, otherwise the log is flooded with
|
|
|
|
these messages */
|
|
|
|
if (combo & ~0xff6d0400)
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_IRQ("======= valid IRQ bits: 0x%08x ======\n", combo);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_DEC_DMA_COMPLETE) {
|
2007-07-11 03:47:07 +07:00
|
|
|
IVTV_DEBUG_HI_IRQ("DEC DMA COMPLETE\n");
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_DMA_READ) {
|
|
|
|
ivtv_irq_dma_read(itv);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_ENC_DMA_COMPLETE) {
|
|
|
|
ivtv_irq_enc_dma_complete(itv);
|
|
|
|
}
|
|
|
|
|
2007-05-20 00:07:16 +07:00
|
|
|
if (combo & IVTV_IRQ_ENC_PIO_COMPLETE) {
|
|
|
|
ivtv_irq_enc_pio_complete(itv);
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
if (combo & IVTV_IRQ_DMA_ERR) {
|
|
|
|
ivtv_irq_dma_err(itv);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_ENC_START_CAP) {
|
|
|
|
ivtv_irq_enc_start_cap(itv);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_ENC_VBI_CAP) {
|
|
|
|
ivtv_irq_enc_vbi_cap(itv);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_DEC_VBI_RE_INSERT) {
|
2007-05-20 00:07:16 +07:00
|
|
|
ivtv_irq_dec_vbi_reinsert(itv);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_ENC_EOS) {
|
|
|
|
IVTV_DEBUG_IRQ("ENC EOS\n");
|
|
|
|
set_bit(IVTV_F_I_EOS, &itv->i_flags);
|
2007-08-23 20:13:15 +07:00
|
|
|
wake_up(&itv->eos_waitq);
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_DEC_DATA_REQ) {
|
|
|
|
ivtv_irq_dec_data_req(itv);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Decoder Vertical Sync - We can't rely on 'combo', so check if vsync enabled */
|
|
|
|
if (~itv->irqmask & IVTV_IRQ_DEC_VSYNC) {
|
|
|
|
ivtv_irq_vsync(itv);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_ENC_VIM_RST) {
|
|
|
|
IVTV_DEBUG_IRQ("VIM RST\n");
|
|
|
|
/*ivtv_vapi(itv, CX2341X_ENC_REFRESH_INPUT, 0); */
|
|
|
|
}
|
|
|
|
|
|
|
|
if (combo & IVTV_IRQ_DEC_AUD_MODE_CHG) {
|
|
|
|
IVTV_DEBUG_INFO("Stereo mode changed\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((combo & IVTV_IRQ_DMA) && !test_bit(IVTV_F_I_DMA, &itv->i_flags)) {
|
2007-08-18 21:36:09 +07:00
|
|
|
itv->irq_rr_idx++;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
for (i = 0; i < IVTV_MAX_STREAMS; i++) {
|
2007-08-18 21:36:09 +07:00
|
|
|
int idx = (i + itv->irq_rr_idx) % IVTV_MAX_STREAMS;
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
struct ivtv_stream *s = &itv->streams[idx];
|
|
|
|
|
|
|
|
if (!test_and_clear_bit(IVTV_F_S_DMA_PENDING, &s->s_flags))
|
|
|
|
continue;
|
|
|
|
if (s->type >= IVTV_DEC_STREAM_TYPE_MPG)
|
|
|
|
ivtv_dma_dec_start(s);
|
|
|
|
else
|
|
|
|
ivtv_dma_enc_start(s);
|
|
|
|
break;
|
|
|
|
}
|
2009-12-22 08:59:26 +07:00
|
|
|
|
|
|
|
if (i == IVTV_MAX_STREAMS &&
|
|
|
|
test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags))
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
ivtv_udma_start(itv);
|
|
|
|
}
|
|
|
|
|
2007-05-20 00:07:16 +07:00
|
|
|
if ((combo & IVTV_IRQ_DMA) && !test_bit(IVTV_F_I_PIO, &itv->i_flags)) {
|
2007-08-18 21:36:09 +07:00
|
|
|
itv->irq_rr_idx++;
|
2007-05-20 00:07:16 +07:00
|
|
|
for (i = 0; i < IVTV_MAX_STREAMS; i++) {
|
2007-08-18 21:36:09 +07:00
|
|
|
int idx = (i + itv->irq_rr_idx) % IVTV_MAX_STREAMS;
|
2007-05-20 00:07:16 +07:00
|
|
|
struct ivtv_stream *s = &itv->streams[idx];
|
|
|
|
|
|
|
|
if (!test_and_clear_bit(IVTV_F_S_PIO_PENDING, &s->s_flags))
|
|
|
|
continue;
|
|
|
|
if (s->type == IVTV_DEC_STREAM_TYPE_VBI || s->type < IVTV_DEC_STREAM_TYPE_MPG)
|
|
|
|
ivtv_dma_enc_start(s);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2007-08-26 00:11:23 +07:00
|
|
|
if (test_and_clear_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags)) {
|
2010-06-29 15:07:09 +07:00
|
|
|
queue_kthread_work(&itv->irq_worker, &itv->irq_work);
|
2007-08-26 00:11:23 +07:00
|
|
|
}
|
2007-05-20 00:07:16 +07:00
|
|
|
|
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!
Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 22:31:25 +07:00
|
|
|
spin_unlock(&itv->dma_reg_lock);
|
|
|
|
|
|
|
|
/* If we've just handled a 'forced' vsync, it's safest to say it
|
|
|
|
* wasn't ours. Another device may have triggered it at just
|
|
|
|
* the right time.
|
|
|
|
*/
|
|
|
|
return vsync_force ? IRQ_NONE : IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
void ivtv_unfinished_dma(unsigned long arg)
|
|
|
|
{
|
|
|
|
struct ivtv *itv = (struct ivtv *)arg;
|
|
|
|
|
|
|
|
if (!test_bit(IVTV_F_I_DMA, &itv->i_flags))
|
|
|
|
return;
|
|
|
|
IVTV_ERR("DMA TIMEOUT %08x %d\n", read_reg(IVTV_REG_DMASTATUS), itv->cur_dma_stream);
|
|
|
|
|
|
|
|
write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
|
|
|
|
clear_bit(IVTV_F_I_UDMA, &itv->i_flags);
|
|
|
|
clear_bit(IVTV_F_I_DMA, &itv->i_flags);
|
|
|
|
itv->cur_dma_stream = -1;
|
|
|
|
wake_up(&itv->dma_waitq);
|
|
|
|
}
|