2005-04-17 05:20:36 +07:00
|
|
|
/*
|
|
|
|
* Interrupt controller support for Marvell's MV64360.
|
|
|
|
*
|
|
|
|
* Author: Rabeeh Khoury <rabeeh@galileo.co.il>
|
|
|
|
* Based on MV64360 PIC written by
|
|
|
|
* Chris Zankel <chris@mvista.com>
|
|
|
|
* Mark A. Greer <mgreer@mvista.com>
|
|
|
|
*
|
|
|
|
* Copyright 2004 MontaVista Software, Inc.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This file contains the specific functions to support the MV64360
|
|
|
|
* interrupt controller.
|
|
|
|
*
|
|
|
|
* The MV64360 has two main interrupt registers (high and low) that
|
|
|
|
* summarizes the interrupts generated by the units of the MV64360.
|
|
|
|
* Each bit is assigned to an interrupt number, where the low register
|
|
|
|
* are assigned from IRQ0 to IRQ31 and the high cause register
|
|
|
|
* from IRQ32 to IRQ63
|
|
|
|
* The GPP (General Purpose Pins) interrupts are assigned from IRQ64 (GPP0)
|
|
|
|
* to IRQ95 (GPP31).
|
|
|
|
* get_irq() returns the lowest interrupt number that is currently asserted.
|
|
|
|
*
|
|
|
|
* Note:
|
|
|
|
* - This driver does not initialize the GPP when used as an interrupt
|
|
|
|
* input.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/stddef.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/signal.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/processor.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mv64x60.h>
|
2005-10-11 19:08:12 +07:00
|
|
|
#include <asm/machdep.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
#ifdef CONFIG_IRQ_ALL_CPUS
|
|
|
|
#error "The mv64360 does not support distribution of IRQs on all CPUs"
|
|
|
|
#endif
|
|
|
|
/* ========================== forward declaration ========================== */
|
|
|
|
|
|
|
|
static void mv64360_unmask_irq(unsigned int);
|
|
|
|
static void mv64360_mask_irq(unsigned int);
|
2006-10-09 18:48:42 +07:00
|
|
|
static irqreturn_t mv64360_cpu_error_int_handler(int, void *);
|
|
|
|
static irqreturn_t mv64360_sram_error_int_handler(int, void *);
|
|
|
|
static irqreturn_t mv64360_pci_error_int_handler(int, void *);
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
/* ========================== local declarations =========================== */
|
|
|
|
|
|
|
|
struct hw_interrupt_type mv64360_pic = {
|
|
|
|
.typename = " mv64360 ",
|
|
|
|
.enable = mv64360_unmask_irq,
|
|
|
|
.disable = mv64360_mask_irq,
|
|
|
|
.ack = mv64360_mask_irq,
|
|
|
|
.end = mv64360_unmask_irq,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define CPU_INTR_STR "mv64360 cpu interface error"
|
|
|
|
#define SRAM_INTR_STR "mv64360 internal sram error"
|
|
|
|
#define PCI0_INTR_STR "mv64360 pci 0 error"
|
|
|
|
#define PCI1_INTR_STR "mv64360 pci 1 error"
|
|
|
|
|
|
|
|
static struct mv64x60_handle bh;
|
|
|
|
|
|
|
|
u32 mv64360_irq_base = 0; /* MV64360 handles the next 96 IRQs from here */
|
|
|
|
|
|
|
|
/* mv64360_init_irq()
|
|
|
|
*
|
|
|
|
* This function initializes the interrupt controller. It assigns
|
|
|
|
* all interrupts from IRQ0 to IRQ95 to the mv64360 interrupt controller.
|
|
|
|
*
|
|
|
|
* Input Variable(s):
|
|
|
|
* None.
|
|
|
|
*
|
|
|
|
* Outpu. Variable(s):
|
|
|
|
* None.
|
|
|
|
*
|
|
|
|
* Returns:
|
|
|
|
* void
|
|
|
|
*
|
|
|
|
* Note:
|
|
|
|
* We register all GPP inputs as interrupt source, but disable them.
|
|
|
|
*/
|
|
|
|
void __init
|
|
|
|
mv64360_init_irq(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (ppc_md.progress)
|
|
|
|
ppc_md.progress("mv64360_init_irq: enter", 0x0);
|
|
|
|
|
|
|
|
bh.v_base = mv64x60_get_bridge_vbase();
|
|
|
|
|
|
|
|
ppc_cached_irq_mask[0] = 0;
|
|
|
|
ppc_cached_irq_mask[1] = 0x0f000000; /* Enable GPP intrs */
|
|
|
|
ppc_cached_irq_mask[2] = 0;
|
|
|
|
|
|
|
|
/* disable all interrupts and clear current interrupts */
|
|
|
|
mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
|
|
|
|
mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
|
|
|
|
mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,ppc_cached_irq_mask[0]);
|
|
|
|
mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,ppc_cached_irq_mask[1]);
|
|
|
|
|
|
|
|
/* All interrupts are level interrupts */
|
|
|
|
for (i = mv64360_irq_base; i < (mv64360_irq_base + 96); i++) {
|
|
|
|
irq_desc[i].status |= IRQ_LEVEL;
|
[PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.
While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.
The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.
This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.
As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.
The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.
We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.
This patch:
rename desc->handler to desc->chip.
Originally i did not want to do this, because it's a big patch. But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.
I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.
So lets get over with this quickly. The conversion was done automatically
via scripts and converts all the code in the kernel.
This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.
[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 16:24:36 +07:00
|
|
|
irq_desc[i].chip = &mv64360_pic;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
if (ppc_md.progress)
|
|
|
|
ppc_md.progress("mv64360_init_irq: exit", 0x0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* mv64360_get_irq()
|
|
|
|
*
|
|
|
|
* This function returns the lowest interrupt number of all interrupts that
|
|
|
|
* are currently asserted.
|
|
|
|
*
|
|
|
|
* Output Variable(s):
|
|
|
|
* None.
|
|
|
|
*
|
|
|
|
* Returns:
|
|
|
|
* int <interrupt number> or -2 (bogus interrupt)
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
int
|
2006-10-09 18:48:42 +07:00
|
|
|
mv64360_get_irq(void)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
|
|
|
int irq;
|
|
|
|
int irq_gpp;
|
|
|
|
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
/*
|
|
|
|
* Second CPU gets only doorbell (message) interrupts.
|
|
|
|
* The doorbell interrupt is BIT28 in the main interrupt low cause reg.
|
|
|
|
*/
|
|
|
|
int cpu_nr = smp_processor_id();
|
|
|
|
if (cpu_nr == 1) {
|
|
|
|
if (!(mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO) &
|
|
|
|
(1 << MV64x60_IRQ_DOORBELL)))
|
|
|
|
return -1;
|
|
|
|
return mv64360_irq_base + MV64x60_IRQ_DOORBELL;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO);
|
|
|
|
irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
|
|
|
|
|
|
|
|
if (irq == -1) {
|
|
|
|
irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_HI);
|
|
|
|
irq = __ilog2((irq & 0x1f0003f7) & ppc_cached_irq_mask[1]);
|
|
|
|
|
|
|
|
if (irq == -1)
|
|
|
|
irq = -2; /* bogus interrupt, should never happen */
|
|
|
|
else {
|
|
|
|
if ((irq >= 24) && (irq < MV64x60_IRQ_DOORBELL)) {
|
|
|
|
irq_gpp = mv64x60_read(&bh,
|
|
|
|
MV64x60_GPP_INTR_CAUSE);
|
|
|
|
irq_gpp = __ilog2(irq_gpp &
|
|
|
|
ppc_cached_irq_mask[2]);
|
|
|
|
|
|
|
|
if (irq_gpp == -1)
|
|
|
|
irq = -2;
|
|
|
|
else {
|
|
|
|
irq = irq_gpp + 64;
|
|
|
|
mv64x60_write(&bh,
|
|
|
|
MV64x60_GPP_INTR_CAUSE,
|
|
|
|
~(1 << (irq - 64)));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
irq += 32;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
|
|
|
|
|
|
|
|
if (irq < 0)
|
|
|
|
return (irq);
|
|
|
|
else
|
|
|
|
return (mv64360_irq_base + irq);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* mv64360_unmask_irq()
|
|
|
|
*
|
|
|
|
* This function enables an interrupt.
|
|
|
|
*
|
|
|
|
* Input Variable(s):
|
|
|
|
* unsigned int interrupt number (IRQ0...IRQ95).
|
|
|
|
*
|
|
|
|
* Output Variable(s):
|
|
|
|
* None.
|
|
|
|
*
|
|
|
|
* Returns:
|
|
|
|
* void
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mv64360_unmask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
/* second CPU gets only doorbell interrupts */
|
|
|
|
if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
|
|
|
|
mv64x60_set_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
|
|
|
|
(1 << MV64x60_IRQ_DOORBELL));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
irq -= mv64360_irq_base;
|
|
|
|
|
|
|
|
if (irq > 31) {
|
|
|
|
if (irq > 63) /* unmask GPP irq */
|
|
|
|
mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
|
|
|
|
ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
|
|
|
|
else /* mask high interrupt register */
|
|
|
|
mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
|
|
|
|
ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
|
|
|
|
}
|
|
|
|
else /* mask low interrupt register */
|
|
|
|
mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
|
|
|
|
ppc_cached_irq_mask[0] |= (1 << irq));
|
|
|
|
|
|
|
|
(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* mv64360_mask_irq()
|
|
|
|
*
|
|
|
|
* This function disables the requested interrupt.
|
|
|
|
*
|
|
|
|
* Input Variable(s):
|
|
|
|
* unsigned int interrupt number (IRQ0...IRQ95).
|
|
|
|
*
|
|
|
|
* Output Variable(s):
|
|
|
|
* None.
|
|
|
|
*
|
|
|
|
* Returns:
|
|
|
|
* void
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mv64360_mask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
|
|
|
|
mv64x60_clr_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
|
|
|
|
(1 << MV64x60_IRQ_DOORBELL));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
irq -= mv64360_irq_base;
|
|
|
|
|
|
|
|
if (irq > 31) {
|
|
|
|
if (irq > 63) /* mask GPP irq */
|
|
|
|
mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
|
|
|
|
ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
|
|
|
|
else /* mask high interrupt register */
|
|
|
|
mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
|
|
|
|
ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
|
|
|
|
}
|
|
|
|
else /* mask low interrupt register */
|
|
|
|
mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
|
|
|
|
ppc_cached_irq_mask[0] &= ~(1 << irq));
|
|
|
|
|
|
|
|
(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t
|
2006-10-09 18:48:42 +07:00
|
|
|
mv64360_cpu_error_int_handler(int irq, void *dev_id)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
|
|
|
printk(KERN_ERR "mv64360_cpu_error_int_handler: %s 0x%08x\n",
|
|
|
|
"Error on CPU interface - Cause regiser",
|
|
|
|
mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
|
|
|
|
printk(KERN_ERR "\tCPU error register dump:\n");
|
|
|
|
printk(KERN_ERR "\tAddress low 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
|
|
|
|
printk(KERN_ERR "\tAddress high 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
|
|
|
|
printk(KERN_ERR "\tData low 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
|
|
|
|
printk(KERN_ERR "\tData high 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
|
|
|
|
printk(KERN_ERR "\tParity 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
|
|
|
|
mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t
|
2006-10-09 18:48:42 +07:00
|
|
|
mv64360_sram_error_int_handler(int irq, void *dev_id)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
|
|
|
printk(KERN_ERR "mv64360_sram_error_int_handler: %s 0x%08x\n",
|
|
|
|
"Error in internal SRAM - Cause register",
|
|
|
|
mv64x60_read(&bh, MV64360_SRAM_ERR_CAUSE));
|
|
|
|
printk(KERN_ERR "\tSRAM error register dump:\n");
|
|
|
|
printk(KERN_ERR "\tAddress Low 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_LO));
|
|
|
|
printk(KERN_ERR "\tAddress High 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_HI));
|
|
|
|
printk(KERN_ERR "\tData Low 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_LO));
|
|
|
|
printk(KERN_ERR "\tData High 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_HI));
|
|
|
|
printk(KERN_ERR "\tParity 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64360_SRAM_ERR_PARITY));
|
|
|
|
mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t
|
2006-10-09 18:48:42 +07:00
|
|
|
mv64360_pci_error_int_handler(int irq, void *dev_id)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
unsigned int pci_bus = (unsigned int)dev_id;
|
|
|
|
|
|
|
|
if (pci_bus == 0) { /* Error on PCI 0 */
|
|
|
|
val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
|
|
|
|
printk(KERN_ERR "%s: Error in PCI %d Interface\n",
|
|
|
|
"mv64360_pci_error_int_handler", pci_bus);
|
|
|
|
printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
|
|
|
|
printk(KERN_ERR "\tCause register 0x%08x\n", val);
|
|
|
|
printk(KERN_ERR "\tAddress Low 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
|
|
|
|
printk(KERN_ERR "\tAddress High 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
|
|
|
|
printk(KERN_ERR "\tAttribute 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
|
|
|
|
printk(KERN_ERR "\tCommand 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
|
|
|
|
mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
|
|
|
|
}
|
|
|
|
if (pci_bus == 1) { /* Error on PCI 1 */
|
|
|
|
val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
|
|
|
|
printk(KERN_ERR "%s: Error in PCI %d Interface\n",
|
|
|
|
"mv64360_pci_error_int_handler", pci_bus);
|
|
|
|
printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
|
|
|
|
printk(KERN_ERR "\tCause register 0x%08x\n", val);
|
|
|
|
printk(KERN_ERR "\tAddress Low 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
|
|
|
|
printk(KERN_ERR "\tAddress High 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
|
|
|
|
printk(KERN_ERR "\tAttribute 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
|
|
|
|
printk(KERN_ERR "\tCommand 0x%08x\n",
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
|
|
|
|
mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
|
|
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
2005-09-04 05:55:56 +07:00
|
|
|
/*
|
|
|
|
* Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of
|
|
|
|
* errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as
|
|
|
|
* well. IOW, don't set bit 0.
|
|
|
|
*/
|
|
|
|
#define MV64360_PCI0_ERR_MASK_VAL 0x00a50c24
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
static int __init
|
|
|
|
mv64360_register_hdlrs(void)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* Clear old errors and register CPU interface error intr handler */
|
|
|
|
mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
|
|
|
|
if ((rc = request_irq(MV64x60_IRQ_CPU_ERR + mv64360_irq_base,
|
2006-10-09 22:26:47 +07:00
|
|
|
mv64360_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, NULL)))
|
2005-04-17 05:20:36 +07:00
|
|
|
printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
|
|
|
|
|
|
|
|
mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
|
|
|
|
mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000ff);
|
|
|
|
|
|
|
|
/* Clear old errors and register internal SRAM error intr handler */
|
|
|
|
mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
|
|
|
|
if ((rc = request_irq(MV64360_IRQ_SRAM_PAR_ERR + mv64360_irq_base,
|
2006-10-09 22:26:47 +07:00
|
|
|
mv64360_sram_error_int_handler,IRQF_DISABLED,SRAM_INTR_STR, NULL)))
|
2005-04-17 05:20:36 +07:00
|
|
|
printk(KERN_WARNING "Can't register SRAM error handler: %d",rc);
|
|
|
|
|
|
|
|
/* Clear old errors and register PCI 0 error intr handler */
|
|
|
|
mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, 0);
|
|
|
|
if ((rc = request_irq(MV64360_IRQ_PCI0 + mv64360_irq_base,
|
|
|
|
mv64360_pci_error_int_handler,
|
2006-07-02 09:29:22 +07:00
|
|
|
IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
|
2005-04-17 05:20:36 +07:00
|
|
|
printk(KERN_WARNING "Can't register pci 0 error handler: %d",
|
|
|
|
rc);
|
|
|
|
|
|
|
|
mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
|
2005-09-04 05:55:56 +07:00
|
|
|
mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
|
|
|
|
|
|
|
|
/* Erratum FEr PCI-#16 says to clear bit 0 of PCI SERRn Mask reg. */
|
|
|
|
mv64x60_write(&bh, MV64x60_PCI0_ERR_SERR_MASK,
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI0_ERR_SERR_MASK) & ~0x1UL);
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
/* Clear old errors and register PCI 1 error intr handler */
|
|
|
|
mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, 0);
|
|
|
|
if ((rc = request_irq(MV64360_IRQ_PCI1 + mv64360_irq_base,
|
|
|
|
mv64360_pci_error_int_handler,
|
2006-07-02 09:29:22 +07:00
|
|
|
IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
|
2005-04-17 05:20:36 +07:00
|
|
|
printk(KERN_WARNING "Can't register pci 1 error handler: %d",
|
|
|
|
rc);
|
|
|
|
|
|
|
|
mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
|
2005-09-04 05:55:56 +07:00
|
|
|
mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
|
|
|
|
|
|
|
|
/* Erratum FEr PCI-#16 says to clear bit 0 of PCI Intr Mask reg. */
|
|
|
|
mv64x60_write(&bh, MV64x60_PCI1_ERR_SERR_MASK,
|
|
|
|
mv64x60_read(&bh, MV64x60_PCI1_ERR_SERR_MASK) & ~0x1UL);
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
arch_initcall(mv64360_register_hdlrs);
|