linux_dsm_epyc7002/arch/arm/crypto/aesbs-glue.c

438 lines
12 KiB
C
Raw Normal View History

ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-16 23:31:38 +07:00
/*
* linux/arch/arm/crypto/aesbs-glue.c - glue code for NEON bit sliced AES
*
* Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <asm/neon.h>
#include <crypto/aes.h>
#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <linux/module.h>
#include "aes_glue.h"
#define BIT_SLICED_KEY_MAXSIZE (128 * (AES_MAXNR - 1) + 2 * AES_BLOCK_SIZE)
struct BS_KEY {
struct AES_KEY rk;
int converted;
u8 __aligned(8) bs[BIT_SLICED_KEY_MAXSIZE];
} __aligned(8);
asmlinkage void bsaes_enc_key_convert(u8 out[], struct AES_KEY const *in);
asmlinkage void bsaes_dec_key_convert(u8 out[], struct AES_KEY const *in);
asmlinkage void bsaes_cbc_encrypt(u8 const in[], u8 out[], u32 bytes,
struct BS_KEY *key, u8 iv[]);
asmlinkage void bsaes_ctr32_encrypt_blocks(u8 const in[], u8 out[], u32 blocks,
struct BS_KEY *key, u8 const iv[]);
asmlinkage void bsaes_xts_encrypt(u8 const in[], u8 out[], u32 bytes,
struct BS_KEY *key, u8 tweak[]);
asmlinkage void bsaes_xts_decrypt(u8 const in[], u8 out[], u32 bytes,
struct BS_KEY *key, u8 tweak[]);
struct aesbs_cbc_ctx {
struct AES_KEY enc;
struct BS_KEY dec;
};
struct aesbs_ctr_ctx {
struct BS_KEY enc;
};
struct aesbs_xts_ctx {
struct BS_KEY enc;
struct BS_KEY dec;
struct AES_KEY twkey;
};
static int aesbs_cbc_set_key(struct crypto_tfm *tfm, const u8 *in_key,
unsigned int key_len)
{
struct aesbs_cbc_ctx *ctx = crypto_tfm_ctx(tfm);
int bits = key_len * 8;
if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc)) {
tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
return -EINVAL;
}
ctx->dec.rk = ctx->enc;
private_AES_set_decrypt_key(in_key, bits, &ctx->dec.rk);
ctx->dec.converted = 0;
return 0;
}
static int aesbs_ctr_set_key(struct crypto_tfm *tfm, const u8 *in_key,
unsigned int key_len)
{
struct aesbs_ctr_ctx *ctx = crypto_tfm_ctx(tfm);
int bits = key_len * 8;
if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) {
tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
return -EINVAL;
}
ctx->enc.converted = 0;
return 0;
}
static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key,
unsigned int key_len)
{
struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm);
int bits = key_len * 4;
if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) {
tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
return -EINVAL;
}
ctx->dec.rk = ctx->enc.rk;
private_AES_set_decrypt_key(in_key, bits, &ctx->dec.rk);
private_AES_set_encrypt_key(in_key + key_len / 2, bits, &ctx->twkey);
ctx->enc.converted = ctx->dec.converted = 0;
return 0;
}
static int aesbs_cbc_encrypt(struct blkcipher_desc *desc,
struct scatterlist *dst,
struct scatterlist *src, unsigned int nbytes)
{
struct aesbs_cbc_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
int err;
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt(desc, &walk);
while (walk.nbytes) {
u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
u8 *src = walk.src.virt.addr;
if (walk.dst.virt.addr == walk.src.virt.addr) {
u8 *iv = walk.iv;
do {
crypto_xor(src, iv, AES_BLOCK_SIZE);
AES_encrypt(src, src, &ctx->enc);
iv = src;
src += AES_BLOCK_SIZE;
} while (--blocks);
memcpy(walk.iv, iv, AES_BLOCK_SIZE);
} else {
u8 *dst = walk.dst.virt.addr;
do {
crypto_xor(walk.iv, src, AES_BLOCK_SIZE);
AES_encrypt(walk.iv, dst, &ctx->enc);
memcpy(walk.iv, dst, AES_BLOCK_SIZE);
src += AES_BLOCK_SIZE;
dst += AES_BLOCK_SIZE;
} while (--blocks);
}
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-16 23:31:38 +07:00
}
return err;
}
static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst,
struct scatterlist *src, unsigned int nbytes)
{
struct aesbs_cbc_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
int err;
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
while ((walk.nbytes / AES_BLOCK_SIZE) >= 8) {
kernel_neon_begin();
bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
walk.nbytes, &ctx->dec, walk.iv);
kernel_neon_end();
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-16 23:31:38 +07:00
}
while (walk.nbytes) {
u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
u8 *dst = walk.dst.virt.addr;
u8 *src = walk.src.virt.addr;
u8 bk[2][AES_BLOCK_SIZE];
u8 *iv = walk.iv;
do {
if (walk.dst.virt.addr == walk.src.virt.addr)
memcpy(bk[blocks & 1], src, AES_BLOCK_SIZE);
AES_decrypt(src, dst, &ctx->dec.rk);
crypto_xor(dst, iv, AES_BLOCK_SIZE);
if (walk.dst.virt.addr == walk.src.virt.addr)
iv = bk[blocks & 1];
else
iv = src;
dst += AES_BLOCK_SIZE;
src += AES_BLOCK_SIZE;
} while (--blocks);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-16 23:31:38 +07:00
}
return err;
}
static void inc_be128_ctr(__be32 ctr[], u32 addend)
{
int i;
for (i = 3; i >= 0; i--, addend = 1) {
u32 n = be32_to_cpu(ctr[i]) + addend;
ctr[i] = cpu_to_be32(n);
if (n >= addend)
break;
}
}
static int aesbs_ctr_encrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
struct aesbs_ctr_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
u32 blocks;
int err;
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
while ((blocks = walk.nbytes / AES_BLOCK_SIZE)) {
u32 tail = walk.nbytes % AES_BLOCK_SIZE;
__be32 *ctr = (__be32 *)walk.iv;
u32 headroom = UINT_MAX - be32_to_cpu(ctr[3]);
/* avoid 32 bit counter overflow in the NEON code */
if (unlikely(headroom < blocks)) {
blocks = headroom + 1;
tail = walk.nbytes - blocks * AES_BLOCK_SIZE;
}
kernel_neon_begin();
bsaes_ctr32_encrypt_blocks(walk.src.virt.addr,
walk.dst.virt.addr, blocks,
&ctx->enc, walk.iv);
kernel_neon_end();
inc_be128_ctr(ctr, blocks);
nbytes -= blocks * AES_BLOCK_SIZE;
if (nbytes && nbytes == tail && nbytes <= AES_BLOCK_SIZE)
break;
err = blkcipher_walk_done(desc, &walk, tail);
}
if (walk.nbytes) {
u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
u8 ks[AES_BLOCK_SIZE];
AES_encrypt(walk.iv, ks, &ctx->enc.rk);
if (tdst != tsrc)
memcpy(tdst, tsrc, nbytes);
crypto_xor(tdst, ks, nbytes);
err = blkcipher_walk_done(desc, &walk, 0);
}
return err;
}
static int aesbs_xts_encrypt(struct blkcipher_desc *desc,
struct scatterlist *dst,
struct scatterlist *src, unsigned int nbytes)
{
struct aesbs_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
int err;
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
/* generate the initial tweak */
AES_encrypt(walk.iv, walk.iv, &ctx->twkey);
while (walk.nbytes) {
kernel_neon_begin();
bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
walk.nbytes, &ctx->enc, walk.iv);
kernel_neon_end();
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-16 23:31:38 +07:00
}
return err;
}
static int aesbs_xts_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst,
struct scatterlist *src, unsigned int nbytes)
{
struct aesbs_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
int err;
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
/* generate the initial tweak */
AES_encrypt(walk.iv, walk.iv, &ctx->twkey);
while (walk.nbytes) {
kernel_neon_begin();
bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
walk.nbytes, &ctx->dec, walk.iv);
kernel_neon_end();
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-16 23:31:38 +07:00
}
return err;
}
static struct crypto_alg aesbs_algs[] = { {
.cra_name = "__cbc-aes-neonbs",
.cra_driver_name = "__driver-cbc-aes-neonbs",
.cra_priority = 0,
.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER |
CRYPTO_ALG_INTERNAL,
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-16 23:31:38 +07:00
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct aesbs_cbc_ctx),
.cra_alignmask = 7,
.cra_type = &crypto_blkcipher_type,
.cra_module = THIS_MODULE,
.cra_blkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.setkey = aesbs_cbc_set_key,
.encrypt = aesbs_cbc_encrypt,
.decrypt = aesbs_cbc_decrypt,
},
}, {
.cra_name = "__ctr-aes-neonbs",
.cra_driver_name = "__driver-ctr-aes-neonbs",
.cra_priority = 0,
.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER |
CRYPTO_ALG_INTERNAL,
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-16 23:31:38 +07:00
.cra_blocksize = 1,
.cra_ctxsize = sizeof(struct aesbs_ctr_ctx),
.cra_alignmask = 7,
.cra_type = &crypto_blkcipher_type,
.cra_module = THIS_MODULE,
.cra_blkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.setkey = aesbs_ctr_set_key,
.encrypt = aesbs_ctr_encrypt,
.decrypt = aesbs_ctr_encrypt,
},
}, {
.cra_name = "__xts-aes-neonbs",
.cra_driver_name = "__driver-xts-aes-neonbs",
.cra_priority = 0,
.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER |
CRYPTO_ALG_INTERNAL,
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-16 23:31:38 +07:00
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct aesbs_xts_ctx),
.cra_alignmask = 7,
.cra_type = &crypto_blkcipher_type,
.cra_module = THIS_MODULE,
.cra_blkcipher = {
.min_keysize = 2 * AES_MIN_KEY_SIZE,
.max_keysize = 2 * AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.setkey = aesbs_xts_set_key,
.encrypt = aesbs_xts_encrypt,
.decrypt = aesbs_xts_decrypt,
},
}, {
.cra_name = "cbc(aes)",
.cra_driver_name = "cbc-aes-neonbs",
.cra_priority = 300,
.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct async_helper_ctx),
.cra_alignmask = 7,
.cra_type = &crypto_ablkcipher_type,
.cra_module = THIS_MODULE,
.cra_init = ablk_init,
.cra_exit = ablk_exit,
.cra_ablkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.setkey = ablk_set_key,
.encrypt = __ablk_encrypt,
.decrypt = ablk_decrypt,
}
}, {
.cra_name = "ctr(aes)",
.cra_driver_name = "ctr-aes-neonbs",
.cra_priority = 300,
.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
.cra_blocksize = 1,
.cra_ctxsize = sizeof(struct async_helper_ctx),
.cra_alignmask = 7,
.cra_type = &crypto_ablkcipher_type,
.cra_module = THIS_MODULE,
.cra_init = ablk_init,
.cra_exit = ablk_exit,
.cra_ablkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.setkey = ablk_set_key,
.encrypt = ablk_encrypt,
.decrypt = ablk_decrypt,
}
}, {
.cra_name = "xts(aes)",
.cra_driver_name = "xts-aes-neonbs",
.cra_priority = 300,
.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct async_helper_ctx),
.cra_alignmask = 7,
.cra_type = &crypto_ablkcipher_type,
.cra_module = THIS_MODULE,
.cra_init = ablk_init,
.cra_exit = ablk_exit,
.cra_ablkcipher = {
.min_keysize = 2 * AES_MIN_KEY_SIZE,
.max_keysize = 2 * AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.setkey = ablk_set_key,
.encrypt = ablk_encrypt,
.decrypt = ablk_decrypt,
}
} };
static int __init aesbs_mod_init(void)
{
if (!cpu_has_neon())
return -ENODEV;
return crypto_register_algs(aesbs_algs, ARRAY_SIZE(aesbs_algs));
}
static void __exit aesbs_mod_exit(void)
{
crypto_unregister_algs(aesbs_algs, ARRAY_SIZE(aesbs_algs));
}
module_init(aesbs_mod_init);
module_exit(aesbs_mod_exit);
MODULE_DESCRIPTION("Bit sliced AES in CBC/CTR/XTS modes using NEON");
MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
MODULE_LICENSE("GPL");