AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
6bdd533cee
linux_dsm_epyc7002/tools/testing/selftests/bpf/Makefile

129 lines
3.9 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
# SPDX-License-Identifier: GPL-2.0
selftests/bpf: sync kernel headers and introduce arch support in Makefile Synchronize the uapi kernel header files which solves the broken uapi export of pt_regs. Because of arch-specific uapi headers, extended the include path in the Makefile. With this change, the test_verifier program compiles and runs successfully on s390. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-04 16:56:48 +07:00
bpf: Rebuild bpf.o for any dependency update This is needed to force a rebuild of bpf.o when one of its dependencies (e.g. uapi/linux/bpf.h) is updated. Add a phony target. Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-12 05:20:23 +07:00
LIBDIR := ../../../lib
selftests/bpf: fix broken build, take 2 Merge of 'linux-kselftest-4.11-rc1': 1. Partially removed use of 'test_objs' target, breaking force rebuild of BPFOBJ, introduced in commit d498f8719a09 ("bpf: Rebuild bpf.o for any dependency update"). Update target so dependency on BPFOBJ is restored. 2. Introduced commit 2047f1d8ba28 ("selftests: Fix the .c linking rule") which fixes order of LDLIBS. Commit d02d8986a768 ("bpf: Always test unprivileged programs") added libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of test_verifier. 3. Introduced commit d83c3ba0b926 ("selftests: Fix selftests build to just build, not run tests"). Reordering the Makefile allows us to remove the 'all' target. Tested both: selftests/bpf$ make and selftests$ make TARGETS=bpf on Ubuntu 16.04.2. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 13:03:14 +07:00
BPFDIR := $(LIBDIR)/bpf
bpf: add various verifier test cases for self-tests Add a couple of test cases, for example, probing for xadd on a spilled pointer to packet and map_value_adj register, various other map_value_adj tests including the unaligned load/store, and trying out pointer arithmetic on map_value_adj register itself. For the unaligned load/store, we need to figure out whether the architecture has efficient unaligned access and need to mark affected tests accordingly. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 07:24:04 +07:00
APIDIR := ../../../include/uapi
GENDIR := ../../../../include/generated
GENHDR := $(GENDIR)/autoconf.h
bpf: Rebuild bpf.o for any dependency update This is needed to force a rebuild of bpf.o when one of its dependencies (e.g. uapi/linux/bpf.h) is updated. Add a phony target. Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-12 05:20:23 +07:00
bpf: add various verifier test cases for self-tests Add a couple of test cases, for example, probing for xadd on a spilled pointer to packet and map_value_adj register, various other map_value_adj tests including the unaligned load/store, and trying out pointer arithmetic on map_value_adj register itself. For the unaligned load/store, we need to figure out whether the architecture has efficient unaligned access and need to mark affected tests accordingly. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 07:24:04 +07:00
ifneq ($(wildcard $(GENHDR)),)
GENFLAGS := -DHAVE_GENHDR
endif
tools: bpf: move the event reading loop to libbpf There are two copies of event reading loop - in bpftool and trace_helpers "library". Consolidate them and move the code to libbpf. Return codes from trace_helpers are kept, but renamed to include LIBBPF prefix. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:24:40 +07:00
CFLAGS += -Wall -O2 -I$(APIDIR) -I$(LIBDIR) -I$(BPFDIR) -I$(GENDIR) $(GENFLAGS) -I../../../include
tools/bpf: add a multithreaded stress test in bpf selftests test_lpm_map The new test will spawn four threads, doing map update, delete, lookup and get_next_key in parallel. It is able to reproduce the issue in the previous commit found by syzbot and Eric Dumazet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-27 06:06:08 +07:00
LDLIBS += -lcap -lelf -lrt -lpthread
bpf: add initial suite for selftests Add a start of a test suite for kernel selftests. This moves test_verifier and test_maps over to tools/testing/selftests/bpf/ along with various code improvements and also adds a script for invoking test_bpf module. The test suite can simply be run via selftest framework, f.e.: # cd tools/testing/selftests/bpf/ # make # make run_tests Both test_verifier and test_maps were kind of misplaced in samples/bpf/ directory and we were looking into adding them to selftests for a while now, so it can be picked up by kbuild bot et al and hopefully also get more exposure and thus new test case additions. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 19:28:36 +07:00
bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID test_stacktrace_build_id() is added. It accesses tracepoint urandom_read with "dd" and "urandom_read" and gathers stack traces. Then it reads the stack traces from the stackmap. urandom_read is a statically link binary that reads from /dev/urandom. test_stacktrace_build_id() calls readelf to read build ID of urandom_read and compares it with build ID from the stackmap. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-15 00:23:22 +07:00
TEST_CUSTOM_PROGS = $(OUTPUT)/urandom_read
all: $(TEST_CUSTOM_PROGS)
$(TEST_CUSTOM_PROGS): urandom_read
urandom_read: urandom_read.c
selftests/bpf: make sure build-id is on --build-id may not be a default linker config. Make sure it's used when linking urandom_read test program. Otherwise test_stacktrace_build_id[_nmi] tests will be failling. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-15 07:11:29 +07:00
$(CC) -o $(TEST_CUSTOM_PROGS) -static $< -Wl,--build-id
bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID test_stacktrace_build_id() is added. It accesses tracepoint urandom_read with "dd" and "urandom_read" and gathers stack traces. Then it reads the stack traces from the stackmap. urandom_read is a statically link binary that reads from /dev/urandom. test_stacktrace_build_id() calls readelf to read build ID of urandom_read and compares it with build ID from the stackmap. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-15 00:23:22 +07:00
selftests/bpf: add selftest that use test_libbpf_open This script test_libbpf.sh will be part of the 'make run_tests' invocation, but can also be invoked manually in this directory, and a verbose mode can be enabled via setting the environment variable $VERBOSE like: $ VERBOSE=yes ./test_libbpf.sh The script contains some tests that are commented out, as they currently fail. They are reminders about what we need to improve for the libbpf loader library. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08 18:48:27 +07:00
# Order correspond to 'make run_tests' order
bpf: Add verifier test case for alignment. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-11 01:43:51 +07:00
TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
selftests/bpf: Selftest for sys_bind post-hooks. Add selftest for attach types `BPF_CGROUP_INET4_POST_BIND` and `BPF_CGROUP_INET6_POST_BIND`. The main things tested are: * prog load behaves as expected (valid/invalid accesses in prog); * prog attach behaves as expected (load- vs attach-time attach types); * `BPF_CGROUP_INET_SOCK_CREATE` can be attached in a backward compatible way; * post-hooks return expected result and errno. Example: # ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [PASS] Test case: sock_create load w/ expected_attach_type .. [PASS] Test case: attach type mismatch bind4 vs bind6 .. [PASS] Test case: attach type mismatch bind6 vs bind4 .. [PASS] Test case: attach type mismatch default vs bind4 .. [PASS] Test case: attach type mismatch bind6 vs sock_create .. [PASS] Test case: bind4 reject all .. [PASS] Test case: bind6 reject all .. [PASS] Test case: bind6 deny specific IP & port .. [PASS] Test case: bind4 allow specific IP & port .. [PASS] Test case: bind4 allow all .. [PASS] Test case: bind6 allow all .. [PASS] Summary: 16 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 05:08:08 +07:00
test_align test_verifier_log test_dev_cgroup test_tcpbpf_user \
bpf: add selftest for lirc_mode2 type program This is simple test over rc-loopback. Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-27 18:24:10 +07:00
test_sock test_btf test_sockmap test_lirc_mode2_user
selftests/bpf: add a test for overlapping packet range checks add simple C test case for llvm and verifier range check fix from commit b1977682a385 ("bpf: improve verifier packet range checks") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 11:45:41 +07:00
selftests/bpf: Add test cases to test narrower ctx field loads Add test cases in test_verifier and test_progs. Negative tests are added in test_verifier as well. The test in test_progs will compare the value of narrower ctx field load result vs. the masked value of normal full-field load result, and will fail if they are not the same. Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14 05:52:14 +07:00
TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test_obj_id.o \
bpf: improve selftests and add tests for meta pointer Add various test_verifier selftests, and a simple xdp/tc functional test that is being attached to veths. Also let new versions of clang use the recently added -mcpu=probe support [1] for the BPF target, so that it can probe the underlying kernel for BPF insn set extensions. We could also just set this options always, where older versions just ignore it and give a note to the user that the -mcpu value is not supported, but given emitting the note cannot be turned off from clang side lets not confuse users running selftests with it, thus fallback to the default generic one when we see that clang doesn't support it. Also allow CPU option to be overridden in the Makefile from command line. [1] https://github.com/llvm-mirror/llvm/commit/d7276a40d87b89aed89978dec6457a5b8b3a0db5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 07:25:53 +07:00
test_pkt_md_access.o test_xdp_redirect.o test_xdp_meta.o sockmap_parse_prog.o \
selftests/bpf: add bpf_call test strip always_inline from test_l4lb.c and compile it with -fno-inline to let verifier go through 11 function with various function arguments and return values Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 08:55:11 +07:00
sockmap_verdict_prog.o dev_cgroup.o sample_ret0.o test_tracepoint.o \
selftest/bpf: extend the offload test with map checks Check map device information is reported correctly, and perform basic map operations. Check device destruction gets rid of the maps and map allocation failure path by telling netdevsim to reject map offload via DebugFS. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-18 10:13:31 +07:00
test_l4lb_noinline.o test_xdp_noinline.o test_stacktrace_map.o \
bpf: add map tests for BPF_PROG_TYPE_SK_MSG Add map tests to attach BPF_PROG_TYPE_SK_MSG types to a sockmap. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-19 02:57:31 +07:00
sample_map_ret0.o test_tcpbpf_kern.o test_stacktrace_build_id.o \
bpf: btf: Add BTF tests This patch tests the BTF loading, map_create with BTF and the changes in libbpf. -r: Raw tests that test raw crafted BTF data -f: Test LLVM compiled bpf prog with BTF data -g: Test BPF_OBJ_GET_INFO_BY_FD for btf_fd -p: Test pretty print The tools/testing/selftests/bpf/Makefile will probe for BTF support in llc and pahole before generating debug info (-g) and convert them to BTF. You can supply the BTF supported binary through the following make variables: LLC, BTF_PAHOLE and LLVM_OBJCOPY. LLC: The lastest llc with -mattr=dwarfris support for the bpf target. It is only in the master of the llvm repo for now. BTF_PAHOLE: The modified pahole with BTF support: https://github.com/iamkafai/pahole/tree/btf To add a BTF section: "pahole -J bpf_prog.o" LLVM_OBJCOPY: Any llvm-objcopy should do Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-19 05:56:06 +07:00
sockmap_tcp_msg_prog.o connect4_prog.o connect6_prog.o test_adjust_tail.o \
tools/bpf: add a test for bpf_get_stack with raw tracepoint prog The test attached a raw_tracepoint program to raw_syscalls/sys_enter. It tested to get stack for user space, kernel space and user space with build_id request. It also tested to get user and kernel stack into the same buffer with back-to-back bpf_get_stack helper calls. If jit is not enabled, the user space application will check to ensure that the kernel function for raw_tracepoint ___bpf_prog_run is part of the stack. If jit is enabled, we did not have a reliable way to verify the kernel stack, so just assume the kernel stack is good when the kernel stack size is greater than 0. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29 12:28:15 +07:00
test_btf_haskv.o test_btf_nokv.o test_sockmap_kern.o test_tunnel_kern.o \
selftests/bpf: test for seg6local End.BPF action Add a new test for the seg6local End.BPF action. The following helpers are also tested: - bpf_lwt_push_encap within the LWT BPF IN hook - bpf_lwt_seg6_action - bpf_lwt_seg6_adjust_srh - bpf_lwt_seg6_store_bytes A chain of End.BPF actions is built. The SRH is injected through a LWT BPF IN hook before entering this chain. Each End.BPF action validates the previous one, otherwise the packet is dropped. The test succeeds if the last node in the chain receives the packet and the UDP datagram contained can be retrieved from userspace. Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-20 20:58:17 +07:00
test_get_stack_rawtp.o test_sockmap_kern.o test_sockhash_kern.o \
bpf: add selftest for lirc_mode2 type program This is simple test over rc-loopback. Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-27 18:24:10 +07:00
test_lwt_seg6local.o sendmsg4_prog.o sendmsg6_prog.o test_lirc_mode2_kern.o
bpf: add initial suite for selftests Add a start of a test suite for kernel selftests. This moves test_verifier and test_maps over to tools/testing/selftests/bpf/ along with various code improvements and also adds a script for invoking test_bpf module. The test suite can simply be run via selftest framework, f.e.: # cd tools/testing/selftests/bpf/ # make # make run_tests Both test_verifier and test_maps were kind of misplaced in samples/bpf/ directory and we were looking into adding them to selftests for a while now, so it can be picked up by kbuild bot et al and hopefully also get more exposure and thus new test case additions. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 19:28:36 +07:00
selftests/bpf: add selftest that use test_libbpf_open This script test_libbpf.sh will be part of the 'make run_tests' invocation, but can also be invoked manually in this directory, and a verbose mode can be enabled via setting the environment variable $VERBOSE like: $ VERBOSE=yes ./test_libbpf.sh The script contains some tests that are commented out, as they currently fail. They are reminders about what we need to improve for the libbpf loader library. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08 18:48:27 +07:00
# Order correspond to 'make run_tests' order
TEST_PROGS := test_kmod.sh \
test_libbpf.sh \
test_xdp_redirect.sh \
test_xdp_meta.sh \
selftests/bpf: Selftest for sys_connect hooks Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT attach types. Try to connect(2) to specified IP:port and test that: * remote IP:port pair is overridden; * local end of connection is bound to specified IP. All combinations of IPv4/IPv6 and TCP/UDP are tested. Example: # tcpdump -pn -i lo -w connect.pcap 2>/dev/null & [1] 478 # strace -qqf -e connect -o connect.trace ./test_sock_addr.sh Wait for testing IPv4/IPv6 to become available ... OK Load bind4 with invalid type (can pollute stderr) ... REJECTED Load bind4 with valid type ... OK Attach bind4 with invalid type ... REJECTED Attach bind4 with valid type ... OK Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r2 = 23569 1: (63) *(u32 *)(r1 +24) = r2 2: (b7) r2 = 16777343 3: (63) *(u32 *)(r1 +4) = r2 invalid bpf_context access off=4 size=4 [ 1518.404609] random: crng init done libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect4' libbpf: failed to load object './connect4_prog.o' ... REJECTED Load connect4 with valid type ... OK Attach connect4 with invalid type ... REJECTED Attach connect4 with valid type ... OK Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447) Load bind6 with invalid type (can pollute stderr) ... REJECTED Load bind6 with valid type ... OK Attach bind6 with invalid type ... REJECTED Attach bind6 with valid type ... OK Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r6 = 0 1: (63) *(u32 *)(r1 +12) = r6 invalid bpf_context access off=12 size=4 libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect6' libbpf: failed to load object './connect6_prog.o' ... REJECTED Load connect6 with valid type ... OK Attach connect6 with invalid type ... REJECTED Attach connect6 with valid type ... OK Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 37458) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 39315) ### SUCCESS # egrep 'connect\(.*AF_INET' connect.trace | \ > egrep -vw 'htons\(1025\)' | fold -b -s -w 72 502 connect(7, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(8, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(9, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 502 connect(10, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 # fg tcpdump -pn -i lo -w connect.pcap 2> /dev/null # tcpdump -r connect.pcap -n tcp | cut -c 1-72 reading from file connect.pcap, link-type EN10MB (Ethernet) 17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333 17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112 17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w 17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1, 17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win 17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac 17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt 17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 05:08:06 +07:00
test_offload.py \
selftests/bpf: bpf tunnel test. The patch migrates the original tests at samples/bpf/tcbpf2_kern.c and samples/bpf/test_tunnel_bpf.sh to selftests. There are a couple changes from the original: 1) add ipv6 vxlan, ipv6 geneve, ipv6 ipip tests 2) simplify the original ipip tests (remove iperf tests) 3) improve documentation 4) use bpf_ntoh* and bpf_hton* api In summary, 'test_tunnel_kern.o' contains the following bpf program: GRE: gre_set_tunnel, gre_get_tunnel IP6GRE: ip6gretap_set_tunnel, ip6gretap_get_tunnel ERSPAN: erspan_set_tunnel, erspan_get_tunnel IP6ERSPAN: ip4ip6erspan_set_tunnel, ip4ip6erspan_get_tunnel VXLAN: vxlan_set_tunnel, vxlan_get_tunnel IP6VXLAN: ip6vxlan_set_tunnel, ip6vxlan_get_tunnel GENEVE: geneve_set_tunnel, geneve_get_tunnel IP6GENEVE: ip6geneve_set_tunnel, ip6geneve_get_tunnel IPIP: ipip_set_tunnel, ipip_get_tunnel IP6IP: ipip6_set_tunnel, ipip6_get_tunnel, ip6ip6_set_tunnel, ip6ip6_get_tunnel XFRM: xfrm_get_state Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-27 04:01:39 +07:00
test_sock_addr.sh \
selftests/bpf: test for seg6local End.BPF action Add a new test for the seg6local End.BPF action. The following helpers are also tested: - bpf_lwt_push_encap within the LWT BPF IN hook - bpf_lwt_seg6_action - bpf_lwt_seg6_adjust_srh - bpf_lwt_seg6_store_bytes A chain of End.BPF actions is built. The SRH is injected through a LWT BPF IN hook before entering this chain. Each End.BPF action validates the previous one, otherwise the packet is dropped. The test succeeds if the last node in the chain receives the packet and the UDP datagram contained can be retrieved from userspace. Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-20 20:58:17 +07:00
test_tunnel.sh \
bpf: add selftest for lirc_mode2 type program This is simple test over rc-loopback. Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-27 18:24:10 +07:00
test_lwt_seg6local.sh \
test_lirc_mode2.sh
bpf: add initial suite for selftests Add a start of a test suite for kernel selftests. This moves test_verifier and test_maps over to tools/testing/selftests/bpf/ along with various code improvements and also adds a script for invoking test_bpf module. The test suite can simply be run via selftest framework, f.e.: # cd tools/testing/selftests/bpf/ # make # make run_tests Both test_verifier and test_maps were kind of misplaced in samples/bpf/ directory and we were looking into adding them to selftests for a while now, so it can be picked up by kbuild bot et al and hopefully also get more exposure and thus new test case additions. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 19:28:36 +07:00
selftests/bpf: add selftest that use test_libbpf_open This script test_libbpf.sh will be part of the 'make run_tests' invocation, but can also be invoked manually in this directory, and a verbose mode can be enabled via setting the environment variable $VERBOSE like: $ VERBOSE=yes ./test_libbpf.sh The script contains some tests that are commented out, as they currently fail. They are reminders about what we need to improve for the libbpf loader library. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08 18:48:27 +07:00
# Compile but not part of 'make run_tests'
tools/bpf: remove test_sock_addr from TEST_GEN_PROGS Since test_sock_addr is not supposed to run by itself, remove it from TEST_GEN_PROGS and add it to TEST_GEN_PROGS_EXTENDED. This way, run_tests will not run test_sock_addr. The corresponding test to run is test_sock_addr.sh. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-25 04:45:04 +07:00
TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr
selftests/bpf: add selftest that use test_libbpf_open This script test_libbpf.sh will be part of the 'make run_tests' invocation, but can also be invoked manually in this directory, and a verbose mode can be enabled via setting the environment variable $VERBOSE like: $ VERBOSE=yes ./test_libbpf.sh The script contains some tests that are commented out, as they currently fail. They are reminders about what we need to improve for the libbpf loader library. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08 18:48:27 +07:00
selftests/bpf: fix broken build, take 2 Merge of 'linux-kselftest-4.11-rc1': 1. Partially removed use of 'test_objs' target, breaking force rebuild of BPFOBJ, introduced in commit d498f8719a09 ("bpf: Rebuild bpf.o for any dependency update"). Update target so dependency on BPFOBJ is restored. 2. Introduced commit 2047f1d8ba28 ("selftests: Fix the .c linking rule") which fixes order of LDLIBS. Commit d02d8986a768 ("bpf: Always test unprivileged programs") added libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of test_verifier. 3. Introduced commit d83c3ba0b926 ("selftests: Fix selftests build to just build, not run tests"). Reordering the Makefile allows us to remove the 'all' target. Tested both: selftests/bpf$ make and selftests$ make TARGETS=bpf on Ubuntu 16.04.2. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 13:03:14 +07:00
include ../lib.mk
selftests/bpf: fix Makefile for cgroup_helpers.c The current selftests Makefile construct result in cgroup_helpers.c gets compiled together with all the TEST_GEN_PROGS. And it also result in invoking the libbpf Makefile two times (tools/lib/bpf). These issues were introduced in commit 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/"). The only test program that requires the cgroup helpers is 'test_dev_cgroup'. Thus, create a make target $(OUTPUT)/test_dev_cgroup that extend[1] the 'prerequisite' for the 'stem' %-style pattern in ../lib.mk, for this particular test program. Reviewers notice the make-rules in tools/testing/selftests/lib.mk differ from the normal kernel kbuild rules, and it is practical to use 'make -p' to follow how these 'Implicit/static pattern stem' gets expanded. [1] https://www.gnu.org/software/make/manual/html_node/Static-Usage.html Fixes: 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-13 20:19:15 +07:00
BPFOBJ := $(OUTPUT)/libbpf.a
selftests/bpf: fix broken build, take 2 Merge of 'linux-kselftest-4.11-rc1': 1. Partially removed use of 'test_objs' target, breaking force rebuild of BPFOBJ, introduced in commit d498f8719a09 ("bpf: Rebuild bpf.o for any dependency update"). Update target so dependency on BPFOBJ is restored. 2. Introduced commit 2047f1d8ba28 ("selftests: Fix the .c linking rule") which fixes order of LDLIBS. Commit d02d8986a768 ("bpf: Always test unprivileged programs") added libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of test_verifier. 3. Introduced commit d83c3ba0b926 ("selftests: Fix selftests build to just build, not run tests"). Reordering the Makefile allows us to remove the 'all' target. Tested both: selftests/bpf$ make and selftests$ make TARGETS=bpf on Ubuntu 16.04.2. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 13:03:14 +07:00
$(TEST_GEN_PROGS): $(BPFOBJ)
selftests/bpf: fix broken build Recent merge of 'linux-kselftest-4.11-rc1' tree broke bpf test build. None of the tests were building and test_verifier.c had tons of compiler errors. Fix it and add #ifdef CAP_IS_SUPPORTED to support old versions of libcap. Tested on centos 6.8 and 7 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-11 13:05:55 +07:00
selftests/bpf: add selftest that use test_libbpf_open This script test_libbpf.sh will be part of the 'make run_tests' invocation, but can also be invoked manually in this directory, and a verbose mode can be enabled via setting the environment variable $VERBOSE like: $ VERBOSE=yes ./test_libbpf.sh The script contains some tests that are commented out, as they currently fail. They are reminders about what we need to improve for the libbpf loader library. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08 18:48:27 +07:00
$(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/libbpf.a
selftests/bpf: fix Makefile for cgroup_helpers.c The current selftests Makefile construct result in cgroup_helpers.c gets compiled together with all the TEST_GEN_PROGS. And it also result in invoking the libbpf Makefile two times (tools/lib/bpf). These issues were introduced in commit 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/"). The only test program that requires the cgroup helpers is 'test_dev_cgroup'. Thus, create a make target $(OUTPUT)/test_dev_cgroup that extend[1] the 'prerequisite' for the 'stem' %-style pattern in ../lib.mk, for this particular test program. Reviewers notice the make-rules in tools/testing/selftests/lib.mk differ from the normal kernel kbuild rules, and it is practical to use 'make -p' to follow how these 'Implicit/static pattern stem' gets expanded. [1] https://www.gnu.org/software/make/manual/html_node/Static-Usage.html Fixes: 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-13 20:19:15 +07:00
$(OUTPUT)/test_dev_cgroup: cgroup_helpers.c
selftests/bpf: Selftest for sys_bind post-hooks. Add selftest for attach types `BPF_CGROUP_INET4_POST_BIND` and `BPF_CGROUP_INET6_POST_BIND`. The main things tested are: * prog load behaves as expected (valid/invalid accesses in prog); * prog attach behaves as expected (load- vs attach-time attach types); * `BPF_CGROUP_INET_SOCK_CREATE` can be attached in a backward compatible way; * post-hooks return expected result and errno. Example: # ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [PASS] Test case: sock_create load w/ expected_attach_type .. [PASS] Test case: attach type mismatch bind4 vs bind6 .. [PASS] Test case: attach type mismatch bind6 vs bind4 .. [PASS] Test case: attach type mismatch default vs bind4 .. [PASS] Test case: attach type mismatch bind6 vs sock_create .. [PASS] Test case: bind4 reject all .. [PASS] Test case: bind6 reject all .. [PASS] Test case: bind6 deny specific IP & port .. [PASS] Test case: bind4 allow specific IP & port .. [PASS] Test case: bind4 allow all .. [PASS] Test case: bind6 allow all .. [PASS] Summary: 16 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 05:08:08 +07:00
$(OUTPUT)/test_sock: cgroup_helpers.c
selftests/bpf: Selftest for sys_bind hooks Add selftest to work with bpf_sock_addr context from `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs. Try to bind(2) on IP:port and apply: * loads to make sure context can be read correctly, including narrow loads (byte, half) for IP and full-size loads (word) for all fields; * stores to those fields allowed by verifier. All combination from IPv4/IPv6 and TCP/UDP are tested. Both scenarios are tested: * valid programs can be loaded and attached; * invalid programs can be neither loaded nor attached. Test passes when expected data can be read from context in the BPF-program, and after the call to bind(2) socket is bound to IP:port pair that was written by BPF-program to the context. Example: # ./test_sock_addr Attached bind4 program. Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Attached bind6 program. Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) ### SUCCESS Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 05:08:03 +07:00
$(OUTPUT)/test_sock_addr: cgroup_helpers.c
bpf: sockmap, add selftests This adds a new test program test_sockmap which is the old sample sockmap program. By moving the sample program here we can now run it as part of the self tests suite. To support this a populate_progs() routine is added to load programs and maps which was previously done with load_bpf_file(). This is needed because self test libs do not provide a similar routine. Also we now use the cgroup_helpers routines to manage cgroup use instead of manually creating one and supplying it to the CLI. Notice we keep the CLI around though because it is useful for dbg and specialized testing. To run use ./test_sockmap and the result should be, Summary 660 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-24 04:30:38 +07:00
$(OUTPUT)/test_sockmap: cgroup_helpers.c
tools/bpf: add a test for bpf_get_stack with raw tracepoint prog The test attached a raw_tracepoint program to raw_syscalls/sys_enter. It tested to get stack for user space, kernel space and user space with build_id request. It also tested to get user and kernel stack into the same buffer with back-to-back bpf_get_stack helper calls. If jit is not enabled, the user space application will check to ensure that the kernel function for raw_tracepoint ___bpf_prog_run is part of the stack. If jit is enabled, we did not have a reliable way to verify the kernel stack, so just assume the kernel stack is good when the kernel stack size is greater than 0. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29 12:28:15 +07:00
$(OUTPUT)/test_progs: trace_helpers.c
selftests/bpf: fix Makefile for cgroup_helpers.c The current selftests Makefile construct result in cgroup_helpers.c gets compiled together with all the TEST_GEN_PROGS. And it also result in invoking the libbpf Makefile two times (tools/lib/bpf). These issues were introduced in commit 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/"). The only test program that requires the cgroup helpers is 'test_dev_cgroup'. Thus, create a make target $(OUTPUT)/test_dev_cgroup that extend[1] the 'prerequisite' for the 'stem' %-style pattern in ../lib.mk, for this particular test program. Reviewers notice the make-rules in tools/testing/selftests/lib.mk differ from the normal kernel kbuild rules, and it is practical to use 'make -p' to follow how these 'Implicit/static pattern stem' gets expanded. [1] https://www.gnu.org/software/make/manual/html_node/Static-Usage.html Fixes: 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-13 20:19:15 +07:00
selftests/bpf: fix broken build, take 2 Merge of 'linux-kselftest-4.11-rc1': 1. Partially removed use of 'test_objs' target, breaking force rebuild of BPFOBJ, introduced in commit d498f8719a09 ("bpf: Rebuild bpf.o for any dependency update"). Update target so dependency on BPFOBJ is restored. 2. Introduced commit 2047f1d8ba28 ("selftests: Fix the .c linking rule") which fixes order of LDLIBS. Commit d02d8986a768 ("bpf: Always test unprivileged programs") added libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of test_verifier. 3. Introduced commit d83c3ba0b926 ("selftests: Fix selftests build to just build, not run tests"). Reordering the Makefile allows us to remove the 'all' target. Tested both: selftests/bpf$ make and selftests$ make TARGETS=bpf on Ubuntu 16.04.2. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 13:03:14 +07:00
.PHONY: force
bpf: Rebuild bpf.o for any dependency update This is needed to force a rebuild of bpf.o when one of its dependencies (e.g. uapi/linux/bpf.h) is updated. Add a phony target. Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-12 05:20:23 +07:00
# force a rebuild of BPFOBJ when its dependencies are updated
force:
$(BPFOBJ): force
selftests/bpf: fix broken build, take 2 Merge of 'linux-kselftest-4.11-rc1': 1. Partially removed use of 'test_objs' target, breaking force rebuild of BPFOBJ, introduced in commit d498f8719a09 ("bpf: Rebuild bpf.o for any dependency update"). Update target so dependency on BPFOBJ is restored. 2. Introduced commit 2047f1d8ba28 ("selftests: Fix the .c linking rule") which fixes order of LDLIBS. Commit d02d8986a768 ("bpf: Always test unprivileged programs") added libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of test_verifier. 3. Introduced commit d83c3ba0b926 ("selftests: Fix selftests build to just build, not run tests"). Reordering the Makefile allows us to remove the 'all' target. Tested both: selftests/bpf$ make and selftests$ make TARGETS=bpf on Ubuntu 16.04.2. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 13:03:14 +07:00
$(MAKE) -C $(BPFDIR) OUTPUT=$(OUTPUT)/
selftests/bpf: add a test for overlapping packet range checks add simple C test case for llvm and verifier range check fix from commit b1977682a385 ("bpf: improve verifier packet range checks") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 11:45:41 +07:00
CLANG ?= clang
bpf: improve selftests and add tests for meta pointer Add various test_verifier selftests, and a simple xdp/tc functional test that is being attached to veths. Also let new versions of clang use the recently added -mcpu=probe support [1] for the BPF target, so that it can probe the underlying kernel for BPF insn set extensions. We could also just set this options always, where older versions just ignore it and give a note to the user that the -mcpu value is not supported, but given emitting the note cannot be turned off from clang side lets not confuse users running selftests with it, thus fallback to the default generic one when we see that clang doesn't support it. Also allow CPU option to be overridden in the Makefile from command line. [1] https://github.com/llvm-mirror/llvm/commit/d7276a40d87b89aed89978dec6457a5b8b3a0db5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 07:25:53 +07:00
LLC ?= llc
bpf: btf: Add BTF tests This patch tests the BTF loading, map_create with BTF and the changes in libbpf. -r: Raw tests that test raw crafted BTF data -f: Test LLVM compiled bpf prog with BTF data -g: Test BPF_OBJ_GET_INFO_BY_FD for btf_fd -p: Test pretty print The tools/testing/selftests/bpf/Makefile will probe for BTF support in llc and pahole before generating debug info (-g) and convert them to BTF. You can supply the BTF supported binary through the following make variables: LLC, BTF_PAHOLE and LLVM_OBJCOPY. LLC: The lastest llc with -mattr=dwarfris support for the bpf target. It is only in the master of the llvm repo for now. BTF_PAHOLE: The modified pahole with BTF support: https://github.com/iamkafai/pahole/tree/btf To add a BTF section: "pahole -J bpf_prog.o" LLVM_OBJCOPY: Any llvm-objcopy should do Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-19 05:56:06 +07:00
LLVM_OBJCOPY ?= llvm-objcopy
BTF_PAHOLE ?= pahole
bpf: improve selftests and add tests for meta pointer Add various test_verifier selftests, and a simple xdp/tc functional test that is being attached to veths. Also let new versions of clang use the recently added -mcpu=probe support [1] for the BPF target, so that it can probe the underlying kernel for BPF insn set extensions. We could also just set this options always, where older versions just ignore it and give a note to the user that the -mcpu value is not supported, but given emitting the note cannot be turned off from clang side lets not confuse users running selftests with it, thus fallback to the default generic one when we see that clang doesn't support it. Also allow CPU option to be overridden in the Makefile from command line. [1] https://github.com/llvm-mirror/llvm/commit/d7276a40d87b89aed89978dec6457a5b8b3a0db5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 07:25:53 +07:00
selftests/bpf: fix Makefile for passing LLC to the command line Makefile has a LLC variable that is initialised to "llc", but can theoretically be overridden from the command line ("make LLC=llc-6.0"). However, this fails because for LLVM probe check, "llc" is called directly. Use the $(LLC) variable instead to fix this. Fixes: 22c8852624fc ("bpf: improve selftests and add tests for meta pointer") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21 23:52:50 +07:00
PROBE := $(shell $(LLC) -march=bpf -mcpu=probe -filetype=null /dev/null 2>&1)
bpf: improve selftests and add tests for meta pointer Add various test_verifier selftests, and a simple xdp/tc functional test that is being attached to veths. Also let new versions of clang use the recently added -mcpu=probe support [1] for the BPF target, so that it can probe the underlying kernel for BPF insn set extensions. We could also just set this options always, where older versions just ignore it and give a note to the user that the -mcpu value is not supported, but given emitting the note cannot be turned off from clang side lets not confuse users running selftests with it, thus fallback to the default generic one when we see that clang doesn't support it. Also allow CPU option to be overridden in the Makefile from command line. [1] https://github.com/llvm-mirror/llvm/commit/d7276a40d87b89aed89978dec6457a5b8b3a0db5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 07:25:53 +07:00
# Let newer LLVM versions transparently probe the kernel for availability
# of full BPF instruction set.
ifeq ($(PROBE),)
CPU ?= probe
else
CPU ?= generic
endif
selftests/bpf: add a test for overlapping packet range checks add simple C test case for llvm and verifier range check fix from commit b1977682a385 ("bpf: improve verifier packet range checks") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 11:45:41 +07:00
selftests/bpf: Makefile fix "missing" headers on build with -idirafter Selftests fail to build on several distros/architectures because of missing headers files. On a Ubuntu/x86_64 some missing headers are: asm/byteorder.h, asm/socket.h, asm/sockios.h On a Debian/arm32 build already fails at sys/cdefs.h In both cases, these already exist in /usr/include/<arch-specific-dir>, but Clang does not include these when using '-target bpf' flag, since it is no longer compiling against the host architecture. The solution is to: - run Clang without '-target bpf' and extract the include chain for the current system - add these to the bpf build with '-idirafter' The choice of -idirafter is to catch this error without injecting unexpected include behavior: if an arch-specific tree is built for bpf in the future, this will be correctly found by Clang. Signed-off-by: Sirio Balmelli <sirio@b-ad.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-21 14:00:03 +07:00
# Get Clang's default includes on this system, as opposed to those seen by
# '-target bpf'. This fixes "missing" files on some architectures/distros,
# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc.
#
# Use '-idirafter': Don't interfere with include mechanics except where the
# build would have failed anyways.
CLANG_SYS_INCLUDES := $(shell $(CLANG) -v -E - </dev/null 2>&1 \
| sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }')
selftests/bpf: add bpf_call test strip always_inline from test_l4lb.c and compile it with -fno-inline to let verifier go through 11 function with various function arguments and return values Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 08:55:11 +07:00
CLANG_FLAGS = -I. -I./include/uapi -I../../../include/uapi \
selftests/bpf: Makefile fix "missing" headers on build with -idirafter Selftests fail to build on several distros/architectures because of missing headers files. On a Ubuntu/x86_64 some missing headers are: asm/byteorder.h, asm/socket.h, asm/sockios.h On a Debian/arm32 build already fails at sys/cdefs.h In both cases, these already exist in /usr/include/<arch-specific-dir>, but Clang does not include these when using '-target bpf' flag, since it is no longer compiling against the host architecture. The solution is to: - run Clang without '-target bpf' and extract the include chain for the current system - add these to the bpf build with '-idirafter' The choice of -idirafter is to catch this error without injecting unexpected include behavior: if an arch-specific tree is built for bpf in the future, this will be correctly found by Clang. Signed-off-by: Sirio Balmelli <sirio@b-ad.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-21 14:00:03 +07:00
$(CLANG_SYS_INCLUDES) \
selftests/bpf: add bpf_call test strip always_inline from test_l4lb.c and compile it with -fno-inline to let verifier go through 11 function with various function arguments and return values Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 08:55:11 +07:00
-Wno-compare-distinct-pointer-types
$(OUTPUT)/test_l4lb_noinline.o: CLANG_FLAGS += -fno-inline
selftests/bpf: add xdp noinline test add large semi-artificial XDP test with 18 functions to stress test bpf call verification logic Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 08:55:12 +07:00
$(OUTPUT)/test_xdp_noinline.o: CLANG_FLAGS += -fno-inline
selftests/bpf: add bpf_call test strip always_inline from test_l4lb.c and compile it with -fno-inline to let verifier go through 11 function with various function arguments and return values Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 08:55:11 +07:00
selftests/bpf: Fix bash reference in Makefile '|& ...' is a bash 4.0+ construct which is not guaranteed to be available when using '$(shell ...)' in a Makefile. Fall back to the more portable '2>&1 | ...'. Fixes the following warning during compilation: /bin/sh: 1: Syntax error: "&" unexpected Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 05:26:51 +07:00
BTF_LLC_PROBE := $(shell $(LLC) -march=bpf -mattr=help 2>&1 | grep dwarfris)
BTF_PAHOLE_PROBE := $(shell $(BTF_PAHOLE) --help 2>&1 | grep BTF)
BTF_OBJCOPY_PROBE := $(shell $(LLVM_OBJCOPY) --version 2>&1 | grep LLVM)
bpf: btf: Add BTF tests This patch tests the BTF loading, map_create with BTF and the changes in libbpf. -r: Raw tests that test raw crafted BTF data -f: Test LLVM compiled bpf prog with BTF data -g: Test BPF_OBJ_GET_INFO_BY_FD for btf_fd -p: Test pretty print The tools/testing/selftests/bpf/Makefile will probe for BTF support in llc and pahole before generating debug info (-g) and convert them to BTF. You can supply the BTF supported binary through the following make variables: LLC, BTF_PAHOLE and LLVM_OBJCOPY. LLC: The lastest llc with -mattr=dwarfris support for the bpf target. It is only in the master of the llvm repo for now. BTF_PAHOLE: The modified pahole with BTF support: https://github.com/iamkafai/pahole/tree/btf To add a BTF section: "pahole -J bpf_prog.o" LLVM_OBJCOPY: Any llvm-objcopy should do Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-19 05:56:06 +07:00
ifneq ($(BTF_LLC_PROBE),)
ifneq ($(BTF_PAHOLE_PROBE),)
ifneq ($(BTF_OBJCOPY_PROBE),)
CLANG_FLAGS += -g
LLC_FLAGS += -mattr=dwarfris
DWARF2BTF = y
endif
endif
endif
tools/bpf: permit selftests/bpf to be built in a different directory Fix a couple of issues at tools/testing/selftests/bpf/Makefile so the following command make -C tools/testing/selftests/bpf OUTPUT=/home/yhs/tmp can put the built results into a different directory. Also add the built binary test_tcpbpf_user in the .gitignore file. Fixes: 6882804c916b ("selftests/bpf: add a test for overlapping packet range checks") Fixes: 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-30 12:23:28 +07:00
$(OUTPUT)/%.o: %.c
selftests/bpf: add bpf_call test strip always_inline from test_l4lb.c and compile it with -fno-inline to let verifier go through 11 function with various function arguments and return values Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 08:55:11 +07:00
$(CLANG) $(CLANG_FLAGS) \
bpf: improve selftests and add tests for meta pointer Add various test_verifier selftests, and a simple xdp/tc functional test that is being attached to veths. Also let new versions of clang use the recently added -mcpu=probe support [1] for the BPF target, so that it can probe the underlying kernel for BPF insn set extensions. We could also just set this options always, where older versions just ignore it and give a note to the user that the -mcpu value is not supported, but given emitting the note cannot be turned off from clang side lets not confuse users running selftests with it, thus fallback to the default generic one when we see that clang doesn't support it. Also allow CPU option to be overridden in the Makefile from command line. [1] https://github.com/llvm-mirror/llvm/commit/d7276a40d87b89aed89978dec6457a5b8b3a0db5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 07:25:53 +07:00
-O2 -target bpf -emit-llvm -c $< -o - | \
bpf: btf: Add BTF tests This patch tests the BTF loading, map_create with BTF and the changes in libbpf. -r: Raw tests that test raw crafted BTF data -f: Test LLVM compiled bpf prog with BTF data -g: Test BPF_OBJ_GET_INFO_BY_FD for btf_fd -p: Test pretty print The tools/testing/selftests/bpf/Makefile will probe for BTF support in llc and pahole before generating debug info (-g) and convert them to BTF. You can supply the BTF supported binary through the following make variables: LLC, BTF_PAHOLE and LLVM_OBJCOPY. LLC: The lastest llc with -mattr=dwarfris support for the bpf target. It is only in the master of the llvm repo for now. BTF_PAHOLE: The modified pahole with BTF support: https://github.com/iamkafai/pahole/tree/btf To add a BTF section: "pahole -J bpf_prog.o" LLVM_OBJCOPY: Any llvm-objcopy should do Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-19 05:56:06 +07:00
$(LLC) -march=bpf -mcpu=$(CPU) $(LLC_FLAGS) -filetype=obj -o $@
ifeq ($(DWARF2BTF),y)
$(BTF_PAHOLE) -J $@
endif
bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID test_stacktrace_build_id() is added. It accesses tracepoint urandom_read with "dd" and "urandom_read" and gathers stack traces. Then it reads the stack traces from the stackmap. urandom_read is a statically link binary that reads from /dev/urandom. test_stacktrace_build_id() calls readelf to read build ID of urandom_read and compares it with build ID from the stackmap. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-15 00:23:22 +07:00
EXTRA_CLEAN := $(TEST_CUSTOM_PROGS)
Reference in New Issue Copy Permalink