[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
/* zd_mac.c
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <linux/wireless.h>
|
|
|
|
#include <linux/usb.h>
|
|
|
|
#include <linux/jiffies.h>
|
|
|
|
#include <net/ieee80211_radiotap.h>
|
|
|
|
|
|
|
|
#include "zd_def.h"
|
|
|
|
#include "zd_chip.h"
|
|
|
|
#include "zd_mac.h"
|
|
|
|
#include "zd_ieee80211.h"
|
|
|
|
#include "zd_netdev.h"
|
|
|
|
#include "zd_rf.h"
|
|
|
|
#include "zd_util.h"
|
|
|
|
|
|
|
|
static void ieee_init(struct ieee80211_device *ieee);
|
|
|
|
static void softmac_init(struct ieee80211softmac_device *sm);
|
2006-12-06 02:36:26 +07:00
|
|
|
static void set_rts_cts_work(struct work_struct *work);
|
|
|
|
static void set_basic_rates_work(struct work_struct *work);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2006-09-13 08:42:38 +07:00
|
|
|
static void housekeeping_init(struct zd_mac *mac);
|
|
|
|
static void housekeeping_enable(struct zd_mac *mac);
|
|
|
|
static void housekeeping_disable(struct zd_mac *mac);
|
|
|
|
|
2006-12-07 18:30:30 +07:00
|
|
|
static void set_multicast_hash_handler(struct work_struct *work);
|
2006-12-01 07:58:07 +07:00
|
|
|
|
2006-12-11 02:13:12 +07:00
|
|
|
static void do_rx(unsigned long mac_ptr);
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
int zd_mac_init(struct zd_mac *mac,
|
|
|
|
struct net_device *netdev,
|
|
|
|
struct usb_interface *intf)
|
|
|
|
{
|
|
|
|
struct ieee80211_device *ieee = zd_netdev_ieee80211(netdev);
|
|
|
|
|
|
|
|
memset(mac, 0, sizeof(*mac));
|
|
|
|
spin_lock_init(&mac->lock);
|
|
|
|
mac->netdev = netdev;
|
2006-12-06 02:36:26 +07:00
|
|
|
INIT_DELAYED_WORK(&mac->set_rts_cts_work, set_rts_cts_work);
|
|
|
|
INIT_DELAYED_WORK(&mac->set_basic_rates_work, set_basic_rates_work);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2006-12-11 02:13:12 +07:00
|
|
|
skb_queue_head_init(&mac->rx_queue);
|
|
|
|
tasklet_init(&mac->rx_tasklet, do_rx, (unsigned long)mac);
|
|
|
|
tasklet_disable(&mac->rx_tasklet);
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
ieee_init(ieee);
|
|
|
|
softmac_init(ieee80211_priv(netdev));
|
|
|
|
zd_chip_init(&mac->chip, netdev, intf);
|
2006-09-13 08:42:38 +07:00
|
|
|
housekeeping_init(mac);
|
2006-12-07 18:30:30 +07:00
|
|
|
INIT_WORK(&mac->set_multicast_hash_work, set_multicast_hash_handler);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int reset_channel(struct zd_mac *mac)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
unsigned long flags;
|
|
|
|
const struct channel_range *range;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
range = zd_channel_range(mac->regdomain);
|
|
|
|
if (!range->start) {
|
|
|
|
r = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
mac->requested_channel = range->start;
|
|
|
|
r = 0;
|
|
|
|
out:
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_mac_init_hw(struct zd_mac *mac, u8 device_type)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
struct zd_chip *chip = &mac->chip;
|
|
|
|
u8 addr[ETH_ALEN];
|
|
|
|
u8 default_regdomain;
|
|
|
|
|
|
|
|
r = zd_chip_enable_int(chip);
|
|
|
|
if (r)
|
|
|
|
goto out;
|
|
|
|
r = zd_chip_init_hw(chip, device_type);
|
|
|
|
if (r)
|
|
|
|
goto disable_int;
|
|
|
|
|
|
|
|
zd_get_e2p_mac_addr(chip, addr);
|
|
|
|
r = zd_write_mac_addr(chip, addr);
|
|
|
|
if (r)
|
|
|
|
goto disable_int;
|
|
|
|
ZD_ASSERT(!irqs_disabled());
|
|
|
|
spin_lock_irq(&mac->lock);
|
|
|
|
memcpy(mac->netdev->dev_addr, addr, ETH_ALEN);
|
|
|
|
spin_unlock_irq(&mac->lock);
|
|
|
|
|
|
|
|
r = zd_read_regdomain(chip, &default_regdomain);
|
|
|
|
if (r)
|
|
|
|
goto disable_int;
|
|
|
|
if (!zd_regdomain_supported(default_regdomain)) {
|
|
|
|
dev_dbg_f(zd_mac_dev(mac),
|
|
|
|
"Regulatory Domain %#04x is not supported.\n",
|
|
|
|
default_regdomain);
|
|
|
|
r = -EINVAL;
|
|
|
|
goto disable_int;
|
|
|
|
}
|
|
|
|
spin_lock_irq(&mac->lock);
|
|
|
|
mac->regdomain = mac->default_regdomain = default_regdomain;
|
|
|
|
spin_unlock_irq(&mac->lock);
|
|
|
|
r = reset_channel(mac);
|
|
|
|
if (r)
|
|
|
|
goto disable_int;
|
|
|
|
|
2006-08-02 04:43:32 +07:00
|
|
|
/* We must inform the device that we are doing encryption/decryption in
|
|
|
|
* software at the moment. */
|
|
|
|
r = zd_set_encryption_type(chip, ENC_SNIFFER);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (r)
|
|
|
|
goto disable_int;
|
|
|
|
|
|
|
|
r = zd_geo_init(zd_mac_to_ieee80211(mac), mac->regdomain);
|
|
|
|
if (r)
|
|
|
|
goto disable_int;
|
|
|
|
|
|
|
|
r = 0;
|
|
|
|
disable_int:
|
|
|
|
zd_chip_disable_int(chip);
|
|
|
|
out:
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
void zd_mac_clear(struct zd_mac *mac)
|
|
|
|
{
|
2006-12-01 07:58:07 +07:00
|
|
|
flush_workqueue(zd_workqueue);
|
2006-12-11 02:13:12 +07:00
|
|
|
skb_queue_purge(&mac->rx_queue);
|
|
|
|
tasklet_kill(&mac->rx_tasklet);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
zd_chip_clear(&mac->chip);
|
2006-08-13 00:00:17 +07:00
|
|
|
ZD_ASSERT(!spin_is_locked(&mac->lock));
|
|
|
|
ZD_MEMCLEAR(mac, sizeof(struct zd_mac));
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int reset_mode(struct zd_mac *mac)
|
|
|
|
{
|
|
|
|
struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
|
2007-01-29 07:59:40 +07:00
|
|
|
struct zd_ioreq32 ioreqs[] = {
|
2006-08-02 04:43:35 +07:00
|
|
|
{ CR_RX_FILTER, STA_RX_FILTER },
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{ CR_SNIFFER_ON, 0U },
|
|
|
|
};
|
|
|
|
|
|
|
|
if (ieee->iw_mode == IW_MODE_MONITOR) {
|
|
|
|
ioreqs[0].value = 0xffffffff;
|
|
|
|
ioreqs[1].value = 0x1;
|
|
|
|
}
|
|
|
|
|
2007-01-29 07:59:40 +07:00
|
|
|
return zd_iowrite32a(&mac->chip, ioreqs, ARRAY_SIZE(ioreqs));
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
int zd_mac_open(struct net_device *netdev)
|
|
|
|
{
|
|
|
|
struct zd_mac *mac = zd_netdev_mac(netdev);
|
|
|
|
struct zd_chip *chip = &mac->chip;
|
|
|
|
int r;
|
|
|
|
|
2006-12-11 02:13:12 +07:00
|
|
|
tasklet_enable(&mac->rx_tasklet);
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
r = zd_chip_enable_int(chip);
|
|
|
|
if (r < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
r = zd_chip_set_basic_rates(chip, CR_RATES_80211B | CR_RATES_80211G);
|
|
|
|
if (r < 0)
|
|
|
|
goto disable_int;
|
|
|
|
r = reset_mode(mac);
|
|
|
|
if (r)
|
|
|
|
goto disable_int;
|
|
|
|
r = zd_chip_switch_radio_on(chip);
|
|
|
|
if (r < 0)
|
|
|
|
goto disable_int;
|
|
|
|
r = zd_chip_set_channel(chip, mac->requested_channel);
|
|
|
|
if (r < 0)
|
|
|
|
goto disable_radio;
|
|
|
|
r = zd_chip_enable_rx(chip);
|
|
|
|
if (r < 0)
|
|
|
|
goto disable_radio;
|
|
|
|
r = zd_chip_enable_hwint(chip);
|
|
|
|
if (r < 0)
|
|
|
|
goto disable_rx;
|
|
|
|
|
2006-09-13 08:42:38 +07:00
|
|
|
housekeeping_enable(mac);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
ieee80211softmac_start(netdev);
|
|
|
|
return 0;
|
|
|
|
disable_rx:
|
|
|
|
zd_chip_disable_rx(chip);
|
|
|
|
disable_radio:
|
|
|
|
zd_chip_switch_radio_off(chip);
|
|
|
|
disable_int:
|
|
|
|
zd_chip_disable_int(chip);
|
|
|
|
out:
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_mac_stop(struct net_device *netdev)
|
|
|
|
{
|
|
|
|
struct zd_mac *mac = zd_netdev_mac(netdev);
|
|
|
|
struct zd_chip *chip = &mac->chip;
|
|
|
|
|
2006-06-12 05:18:54 +07:00
|
|
|
netif_stop_queue(netdev);
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
/*
|
|
|
|
* The order here deliberately is a little different from the open()
|
|
|
|
* method, since we need to make sure there is no opportunity for RX
|
|
|
|
* frames to be processed by softmac after we have stopped it.
|
|
|
|
*/
|
|
|
|
|
|
|
|
zd_chip_disable_rx(chip);
|
2006-12-11 02:13:12 +07:00
|
|
|
skb_queue_purge(&mac->rx_queue);
|
|
|
|
tasklet_disable(&mac->rx_tasklet);
|
2006-09-13 08:42:38 +07:00
|
|
|
housekeeping_disable(mac);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
ieee80211softmac_stop(netdev);
|
|
|
|
|
2006-11-22 07:06:48 +07:00
|
|
|
/* Ensure no work items are running or queued from this point */
|
|
|
|
cancel_delayed_work(&mac->set_rts_cts_work);
|
|
|
|
cancel_delayed_work(&mac->set_basic_rates_work);
|
|
|
|
flush_workqueue(zd_workqueue);
|
|
|
|
mac->updating_rts_rate = 0;
|
|
|
|
mac->updating_basic_rates = 0;
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
zd_chip_disable_hwint(chip);
|
|
|
|
zd_chip_switch_radio_off(chip);
|
|
|
|
zd_chip_disable_int(chip);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_mac_set_mac_address(struct net_device *netdev, void *p)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
unsigned long flags;
|
|
|
|
struct sockaddr *addr = p;
|
|
|
|
struct zd_mac *mac = zd_netdev_mac(netdev);
|
|
|
|
struct zd_chip *chip = &mac->chip;
|
|
|
|
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
|
|
return -EADDRNOTAVAIL;
|
|
|
|
|
|
|
|
dev_dbg_f(zd_mac_dev(mac),
|
|
|
|
"Setting MAC to " MAC_FMT "\n", MAC_ARG(addr->sa_data));
|
|
|
|
|
|
|
|
r = zd_write_mac_addr(chip, addr->sa_data);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
memcpy(netdev->dev_addr, addr->sa_data, ETH_ALEN);
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-12-07 18:30:30 +07:00
|
|
|
static void set_multicast_hash_handler(struct work_struct *work)
|
2006-12-01 07:58:07 +07:00
|
|
|
{
|
2006-12-07 18:30:30 +07:00
|
|
|
struct zd_mac *mac = container_of(work, struct zd_mac,
|
|
|
|
set_multicast_hash_work);
|
2006-12-01 07:58:07 +07:00
|
|
|
struct zd_mc_hash hash;
|
|
|
|
|
|
|
|
spin_lock_irq(&mac->lock);
|
|
|
|
hash = mac->multicast_hash;
|
|
|
|
spin_unlock_irq(&mac->lock);
|
|
|
|
|
|
|
|
zd_chip_set_multicast_hash(&mac->chip, &hash);
|
|
|
|
}
|
|
|
|
|
|
|
|
void zd_mac_set_multicast_list(struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct zd_mc_hash hash;
|
|
|
|
struct zd_mac *mac = zd_netdev_mac(dev);
|
|
|
|
struct dev_mc_list *mc;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
if (dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) {
|
|
|
|
zd_mc_add_all(&hash);
|
|
|
|
} else {
|
|
|
|
zd_mc_clear(&hash);
|
|
|
|
for (mc = dev->mc_list; mc; mc = mc->next) {
|
|
|
|
dev_dbg_f(zd_mac_dev(mac), "mc addr " MAC_FMT "\n",
|
|
|
|
MAC_ARG(mc->dmi_addr));
|
|
|
|
zd_mc_add_addr(&hash, mc->dmi_addr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
mac->multicast_hash = hash;
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
queue_work(zd_workqueue, &mac->set_multicast_hash_work);
|
|
|
|
}
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
int zd_mac_set_regdomain(struct zd_mac *mac, u8 regdomain)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
u8 channel;
|
|
|
|
|
|
|
|
ZD_ASSERT(!irqs_disabled());
|
|
|
|
spin_lock_irq(&mac->lock);
|
|
|
|
if (regdomain == 0) {
|
|
|
|
regdomain = mac->default_regdomain;
|
|
|
|
}
|
|
|
|
if (!zd_regdomain_supported(regdomain)) {
|
|
|
|
spin_unlock_irq(&mac->lock);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
mac->regdomain = regdomain;
|
|
|
|
channel = mac->requested_channel;
|
|
|
|
spin_unlock_irq(&mac->lock);
|
|
|
|
|
|
|
|
r = zd_geo_init(zd_mac_to_ieee80211(mac), regdomain);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
if (!zd_regdomain_supports_channel(regdomain, channel)) {
|
|
|
|
r = reset_channel(mac);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
u8 zd_mac_get_regdomain(struct zd_mac *mac)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
u8 regdomain;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
regdomain = mac->regdomain;
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
return regdomain;
|
|
|
|
}
|
|
|
|
|
2006-11-22 07:06:48 +07:00
|
|
|
/* Fallback to lowest rate, if rate is unknown. */
|
|
|
|
static u8 rate_to_zd_rate(u8 rate)
|
|
|
|
{
|
|
|
|
switch (rate) {
|
|
|
|
case IEEE80211_CCK_RATE_2MB:
|
|
|
|
return ZD_CCK_RATE_2M;
|
|
|
|
case IEEE80211_CCK_RATE_5MB:
|
|
|
|
return ZD_CCK_RATE_5_5M;
|
|
|
|
case IEEE80211_CCK_RATE_11MB:
|
|
|
|
return ZD_CCK_RATE_11M;
|
|
|
|
case IEEE80211_OFDM_RATE_6MB:
|
|
|
|
return ZD_OFDM_RATE_6M;
|
|
|
|
case IEEE80211_OFDM_RATE_9MB:
|
|
|
|
return ZD_OFDM_RATE_9M;
|
|
|
|
case IEEE80211_OFDM_RATE_12MB:
|
|
|
|
return ZD_OFDM_RATE_12M;
|
|
|
|
case IEEE80211_OFDM_RATE_18MB:
|
|
|
|
return ZD_OFDM_RATE_18M;
|
|
|
|
case IEEE80211_OFDM_RATE_24MB:
|
|
|
|
return ZD_OFDM_RATE_24M;
|
|
|
|
case IEEE80211_OFDM_RATE_36MB:
|
|
|
|
return ZD_OFDM_RATE_36M;
|
|
|
|
case IEEE80211_OFDM_RATE_48MB:
|
|
|
|
return ZD_OFDM_RATE_48M;
|
|
|
|
case IEEE80211_OFDM_RATE_54MB:
|
|
|
|
return ZD_OFDM_RATE_54M;
|
|
|
|
}
|
|
|
|
return ZD_CCK_RATE_1M;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u16 rate_to_cr_rate(u8 rate)
|
|
|
|
{
|
|
|
|
switch (rate) {
|
|
|
|
case IEEE80211_CCK_RATE_2MB:
|
|
|
|
return CR_RATE_1M;
|
|
|
|
case IEEE80211_CCK_RATE_5MB:
|
|
|
|
return CR_RATE_5_5M;
|
|
|
|
case IEEE80211_CCK_RATE_11MB:
|
|
|
|
return CR_RATE_11M;
|
|
|
|
case IEEE80211_OFDM_RATE_6MB:
|
|
|
|
return CR_RATE_6M;
|
|
|
|
case IEEE80211_OFDM_RATE_9MB:
|
|
|
|
return CR_RATE_9M;
|
|
|
|
case IEEE80211_OFDM_RATE_12MB:
|
|
|
|
return CR_RATE_12M;
|
|
|
|
case IEEE80211_OFDM_RATE_18MB:
|
|
|
|
return CR_RATE_18M;
|
|
|
|
case IEEE80211_OFDM_RATE_24MB:
|
|
|
|
return CR_RATE_24M;
|
|
|
|
case IEEE80211_OFDM_RATE_36MB:
|
|
|
|
return CR_RATE_36M;
|
|
|
|
case IEEE80211_OFDM_RATE_48MB:
|
|
|
|
return CR_RATE_48M;
|
|
|
|
case IEEE80211_OFDM_RATE_54MB:
|
|
|
|
return CR_RATE_54M;
|
|
|
|
}
|
|
|
|
return CR_RATE_1M;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void try_enable_tx(struct zd_mac *mac)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
if (mac->updating_rts_rate == 0 && mac->updating_basic_rates == 0)
|
|
|
|
netif_wake_queue(mac->netdev);
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
}
|
|
|
|
|
2006-12-06 02:36:26 +07:00
|
|
|
static void set_rts_cts_work(struct work_struct *work)
|
2006-11-22 07:06:48 +07:00
|
|
|
{
|
2006-12-06 02:36:26 +07:00
|
|
|
struct zd_mac *mac =
|
|
|
|
container_of(work, struct zd_mac, set_rts_cts_work.work);
|
2006-11-22 07:06:48 +07:00
|
|
|
unsigned long flags;
|
|
|
|
u8 rts_rate;
|
|
|
|
unsigned int short_preamble;
|
|
|
|
|
|
|
|
mutex_lock(&mac->chip.mutex);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
mac->updating_rts_rate = 0;
|
|
|
|
rts_rate = mac->rts_rate;
|
|
|
|
short_preamble = mac->short_preamble;
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
|
|
|
|
zd_chip_set_rts_cts_rate_locked(&mac->chip, rts_rate, short_preamble);
|
|
|
|
mutex_unlock(&mac->chip.mutex);
|
|
|
|
|
|
|
|
try_enable_tx(mac);
|
|
|
|
}
|
|
|
|
|
2006-12-06 02:36:26 +07:00
|
|
|
static void set_basic_rates_work(struct work_struct *work)
|
2006-11-22 07:06:48 +07:00
|
|
|
{
|
2006-12-06 02:36:26 +07:00
|
|
|
struct zd_mac *mac =
|
|
|
|
container_of(work, struct zd_mac, set_basic_rates_work.work);
|
2006-11-22 07:06:48 +07:00
|
|
|
unsigned long flags;
|
|
|
|
u16 basic_rates;
|
|
|
|
|
|
|
|
mutex_lock(&mac->chip.mutex);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
mac->updating_basic_rates = 0;
|
|
|
|
basic_rates = mac->basic_rates;
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
|
|
|
|
zd_chip_set_basic_rates_locked(&mac->chip, basic_rates);
|
|
|
|
mutex_unlock(&mac->chip.mutex);
|
|
|
|
|
|
|
|
try_enable_tx(mac);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bssinfo_change(struct net_device *netdev, u32 changes)
|
|
|
|
{
|
|
|
|
struct zd_mac *mac = zd_netdev_mac(netdev);
|
|
|
|
struct ieee80211softmac_device *softmac = ieee80211_priv(netdev);
|
|
|
|
struct ieee80211softmac_bss_info *bssinfo = &softmac->bssinfo;
|
|
|
|
int need_set_rts_cts = 0;
|
|
|
|
int need_set_rates = 0;
|
|
|
|
u16 basic_rates;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes);
|
|
|
|
|
|
|
|
if (changes & IEEE80211SOFTMAC_BSSINFOCHG_SHORT_PREAMBLE) {
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
mac->short_preamble = bssinfo->short_preamble;
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
need_set_rts_cts = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (changes & IEEE80211SOFTMAC_BSSINFOCHG_RATES) {
|
|
|
|
/* Set RTS rate to highest available basic rate */
|
2006-12-11 02:13:12 +07:00
|
|
|
u8 hi_rate = ieee80211softmac_highest_supported_rate(softmac,
|
2006-11-22 07:06:48 +07:00
|
|
|
&bssinfo->supported_rates, 1);
|
2006-12-11 02:13:12 +07:00
|
|
|
hi_rate = rate_to_zd_rate(hi_rate);
|
2006-11-22 07:06:48 +07:00
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
2006-12-11 02:13:12 +07:00
|
|
|
if (hi_rate != mac->rts_rate) {
|
|
|
|
mac->rts_rate = hi_rate;
|
2006-11-22 07:06:48 +07:00
|
|
|
need_set_rts_cts = 1;
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
|
|
|
|
/* Set basic rates */
|
|
|
|
need_set_rates = 1;
|
|
|
|
if (bssinfo->supported_rates.count == 0) {
|
|
|
|
/* Allow the device to be flexible */
|
|
|
|
basic_rates = CR_RATES_80211B | CR_RATES_80211G;
|
|
|
|
} else {
|
|
|
|
int i = 0;
|
|
|
|
basic_rates = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < bssinfo->supported_rates.count; i++) {
|
|
|
|
u16 rate = bssinfo->supported_rates.rates[i];
|
|
|
|
if ((rate & IEEE80211_BASIC_RATE_MASK) == 0)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
rate &= ~IEEE80211_BASIC_RATE_MASK;
|
|
|
|
basic_rates |= rate_to_cr_rate(rate);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
mac->basic_rates = basic_rates;
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Schedule any changes we made above */
|
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
|
|
|
if (need_set_rts_cts && !mac->updating_rts_rate) {
|
|
|
|
mac->updating_rts_rate = 1;
|
|
|
|
netif_stop_queue(mac->netdev);
|
2006-12-06 02:36:26 +07:00
|
|
|
queue_delayed_work(zd_workqueue, &mac->set_rts_cts_work, 0);
|
2006-11-22 07:06:48 +07:00
|
|
|
}
|
|
|
|
if (need_set_rates && !mac->updating_basic_rates) {
|
|
|
|
mac->updating_basic_rates = 1;
|
|
|
|
netif_stop_queue(mac->netdev);
|
2006-12-06 02:36:26 +07:00
|
|
|
queue_delayed_work(zd_workqueue, &mac->set_basic_rates_work,
|
|
|
|
0);
|
2006-11-22 07:06:48 +07:00
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
}
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
static void set_channel(struct net_device *netdev, u8 channel)
|
|
|
|
{
|
|
|
|
struct zd_mac *mac = zd_netdev_mac(netdev);
|
|
|
|
|
|
|
|
dev_dbg_f(zd_mac_dev(mac), "channel %d\n", channel);
|
|
|
|
|
|
|
|
zd_chip_set_channel(&mac->chip, channel);
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_mac_request_channel(struct zd_mac *mac, u8 channel)
|
|
|
|
{
|
|
|
|
unsigned long lock_flags;
|
|
|
|
struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
|
|
|
|
|
|
|
|
if (ieee->iw_mode == IW_MODE_INFRA)
|
|
|
|
return -EPERM;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, lock_flags);
|
|
|
|
if (!zd_regdomain_supports_channel(mac->regdomain, channel)) {
|
|
|
|
spin_unlock_irqrestore(&mac->lock, lock_flags);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
mac->requested_channel = channel;
|
|
|
|
spin_unlock_irqrestore(&mac->lock, lock_flags);
|
|
|
|
if (netif_running(mac->netdev))
|
|
|
|
return zd_chip_set_channel(&mac->chip, channel);
|
|
|
|
else
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-11-22 07:05:30 +07:00
|
|
|
u8 zd_mac_get_channel(struct zd_mac *mac)
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{
|
2006-11-22 07:05:30 +07:00
|
|
|
u8 channel = zd_chip_get_channel(&mac->chip);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2006-11-22 07:05:30 +07:00
|
|
|
dev_dbg_f(zd_mac_dev(mac), "channel %u\n", channel);
|
|
|
|
return channel;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* If wrong rate is given, we are falling back to the slowest rate: 1MBit/s */
|
2006-11-22 07:06:38 +07:00
|
|
|
static u8 zd_rate_typed(u8 zd_rate)
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{
|
|
|
|
static const u8 typed_rates[16] = {
|
2006-11-22 07:06:38 +07:00
|
|
|
[ZD_CCK_RATE_1M] = ZD_CS_CCK|ZD_CCK_RATE_1M,
|
|
|
|
[ZD_CCK_RATE_2M] = ZD_CS_CCK|ZD_CCK_RATE_2M,
|
|
|
|
[ZD_CCK_RATE_5_5M] = ZD_CS_CCK|ZD_CCK_RATE_5_5M,
|
|
|
|
[ZD_CCK_RATE_11M] = ZD_CS_CCK|ZD_CCK_RATE_11M,
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
[ZD_OFDM_RATE_6M] = ZD_CS_OFDM|ZD_OFDM_RATE_6M,
|
|
|
|
[ZD_OFDM_RATE_9M] = ZD_CS_OFDM|ZD_OFDM_RATE_9M,
|
|
|
|
[ZD_OFDM_RATE_12M] = ZD_CS_OFDM|ZD_OFDM_RATE_12M,
|
|
|
|
[ZD_OFDM_RATE_18M] = ZD_CS_OFDM|ZD_OFDM_RATE_18M,
|
|
|
|
[ZD_OFDM_RATE_24M] = ZD_CS_OFDM|ZD_OFDM_RATE_24M,
|
|
|
|
[ZD_OFDM_RATE_36M] = ZD_CS_OFDM|ZD_OFDM_RATE_36M,
|
|
|
|
[ZD_OFDM_RATE_48M] = ZD_CS_OFDM|ZD_OFDM_RATE_48M,
|
|
|
|
[ZD_OFDM_RATE_54M] = ZD_CS_OFDM|ZD_OFDM_RATE_54M,
|
|
|
|
};
|
|
|
|
|
|
|
|
ZD_ASSERT(ZD_CS_RATE_MASK == 0x0f);
|
2006-11-22 07:06:38 +07:00
|
|
|
return typed_rates[zd_rate & ZD_CS_RATE_MASK];
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
int zd_mac_set_mode(struct zd_mac *mac, u32 mode)
|
|
|
|
{
|
|
|
|
struct ieee80211_device *ieee;
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case IW_MODE_AUTO:
|
|
|
|
case IW_MODE_ADHOC:
|
|
|
|
case IW_MODE_INFRA:
|
|
|
|
mac->netdev->type = ARPHRD_ETHER;
|
|
|
|
break;
|
|
|
|
case IW_MODE_MONITOR:
|
|
|
|
mac->netdev->type = ARPHRD_IEEE80211_RADIOTAP;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_dbg_f(zd_mac_dev(mac), "wrong mode %u\n", mode);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ieee = zd_mac_to_ieee80211(mac);
|
|
|
|
ZD_ASSERT(!irqs_disabled());
|
|
|
|
spin_lock_irq(&ieee->lock);
|
|
|
|
ieee->iw_mode = mode;
|
|
|
|
spin_unlock_irq(&ieee->lock);
|
|
|
|
|
|
|
|
if (netif_running(mac->netdev))
|
|
|
|
return reset_mode(mac);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_mac_get_mode(struct zd_mac *mac, u32 *mode)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
struct ieee80211_device *ieee;
|
|
|
|
|
|
|
|
ieee = zd_mac_to_ieee80211(mac);
|
|
|
|
spin_lock_irqsave(&ieee->lock, flags);
|
|
|
|
*mode = ieee->iw_mode;
|
|
|
|
spin_unlock_irqrestore(&ieee->lock, flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_mac_get_range(struct zd_mac *mac, struct iw_range *range)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
const struct channel_range *channel_range;
|
|
|
|
u8 regdomain;
|
|
|
|
|
|
|
|
memset(range, 0, sizeof(*range));
|
|
|
|
|
|
|
|
/* FIXME: Not so important and depends on the mode. For 802.11g
|
|
|
|
* usually this value is used. It seems to be that Bit/s number is
|
|
|
|
* given here.
|
|
|
|
*/
|
|
|
|
range->throughput = 27 * 1000 * 1000;
|
|
|
|
|
|
|
|
range->max_qual.qual = 100;
|
|
|
|
range->max_qual.level = 100;
|
|
|
|
|
|
|
|
/* FIXME: Needs still to be tuned. */
|
|
|
|
range->avg_qual.qual = 71;
|
|
|
|
range->avg_qual.level = 80;
|
|
|
|
|
|
|
|
/* FIXME: depends on standard? */
|
|
|
|
range->min_rts = 256;
|
|
|
|
range->max_rts = 2346;
|
|
|
|
|
|
|
|
range->min_frag = MIN_FRAG_THRESHOLD;
|
|
|
|
range->max_frag = MAX_FRAG_THRESHOLD;
|
|
|
|
|
|
|
|
range->max_encoding_tokens = WEP_KEYS;
|
|
|
|
range->num_encoding_sizes = 2;
|
|
|
|
range->encoding_size[0] = 5;
|
|
|
|
range->encoding_size[1] = WEP_KEY_LEN;
|
|
|
|
|
|
|
|
range->we_version_compiled = WIRELESS_EXT;
|
|
|
|
range->we_version_source = 20;
|
|
|
|
|
2006-12-01 07:57:11 +07:00
|
|
|
range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
|
|
|
|
IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
ZD_ASSERT(!irqs_disabled());
|
|
|
|
spin_lock_irq(&mac->lock);
|
|
|
|
regdomain = mac->regdomain;
|
|
|
|
spin_unlock_irq(&mac->lock);
|
|
|
|
channel_range = zd_channel_range(regdomain);
|
|
|
|
|
|
|
|
range->num_channels = channel_range->end - channel_range->start;
|
|
|
|
range->old_num_channels = range->num_channels;
|
|
|
|
range->num_frequency = range->num_channels;
|
|
|
|
range->old_num_frequency = range->num_frequency;
|
|
|
|
|
|
|
|
for (i = 0; i < range->num_frequency; i++) {
|
|
|
|
struct iw_freq *freq = &range->freq[i];
|
|
|
|
freq->i = channel_range->start + i;
|
|
|
|
zd_channel_to_freq(freq, freq->i);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-11-22 07:06:38 +07:00
|
|
|
static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length)
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{
|
|
|
|
static const u8 rate_divisor[] = {
|
2006-11-22 07:06:38 +07:00
|
|
|
[ZD_CCK_RATE_1M] = 1,
|
|
|
|
[ZD_CCK_RATE_2M] = 2,
|
|
|
|
[ZD_CCK_RATE_5_5M] = 11, /* bits must be doubled */
|
|
|
|
[ZD_CCK_RATE_11M] = 11,
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
[ZD_OFDM_RATE_6M] = 6,
|
|
|
|
[ZD_OFDM_RATE_9M] = 9,
|
|
|
|
[ZD_OFDM_RATE_12M] = 12,
|
|
|
|
[ZD_OFDM_RATE_18M] = 18,
|
|
|
|
[ZD_OFDM_RATE_24M] = 24,
|
|
|
|
[ZD_OFDM_RATE_36M] = 36,
|
|
|
|
[ZD_OFDM_RATE_48M] = 48,
|
|
|
|
[ZD_OFDM_RATE_54M] = 54,
|
|
|
|
};
|
|
|
|
|
|
|
|
u32 bits = (u32)tx_length * 8;
|
|
|
|
u32 divisor;
|
|
|
|
|
2006-11-22 07:06:38 +07:00
|
|
|
divisor = rate_divisor[zd_rate];
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (divisor == 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2006-11-22 07:06:38 +07:00
|
|
|
switch (zd_rate) {
|
|
|
|
case ZD_CCK_RATE_5_5M:
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
bits = (2*bits) + 10; /* round up to the next integer */
|
|
|
|
break;
|
2006-11-22 07:06:38 +07:00
|
|
|
case ZD_CCK_RATE_11M:
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (service) {
|
|
|
|
u32 t = bits % 11;
|
|
|
|
*service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION;
|
|
|
|
if (0 < t && t <= 3) {
|
|
|
|
*service |= ZD_PLCP_SERVICE_LENGTH_EXTENSION;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
bits += 10; /* round up to the next integer */
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return bits/divisor;
|
|
|
|
}
|
|
|
|
|
|
|
|
enum {
|
|
|
|
R2M_SHORT_PREAMBLE = 0x01,
|
|
|
|
R2M_11A = 0x02,
|
|
|
|
};
|
|
|
|
|
2006-11-22 07:06:38 +07:00
|
|
|
static u8 zd_rate_to_modulation(u8 zd_rate, int flags)
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{
|
|
|
|
u8 modulation;
|
|
|
|
|
2006-11-22 07:06:38 +07:00
|
|
|
modulation = zd_rate_typed(zd_rate);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (flags & R2M_SHORT_PREAMBLE) {
|
|
|
|
switch (ZD_CS_RATE(modulation)) {
|
2006-11-22 07:06:38 +07:00
|
|
|
case ZD_CCK_RATE_2M:
|
|
|
|
case ZD_CCK_RATE_5_5M:
|
|
|
|
case ZD_CCK_RATE_11M:
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
modulation |= ZD_CS_CCK_PREA_SHORT;
|
|
|
|
return modulation;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (flags & R2M_11A) {
|
|
|
|
if (ZD_CS_TYPE(modulation) == ZD_CS_OFDM)
|
|
|
|
modulation |= ZD_CS_OFDM_MODE_11A;
|
|
|
|
}
|
|
|
|
return modulation;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void cs_set_modulation(struct zd_mac *mac, struct zd_ctrlset *cs,
|
|
|
|
struct ieee80211_hdr_4addr *hdr)
|
|
|
|
{
|
|
|
|
struct ieee80211softmac_device *softmac = ieee80211_priv(mac->netdev);
|
|
|
|
u16 ftype = WLAN_FC_GET_TYPE(le16_to_cpu(hdr->frame_ctl));
|
2006-11-22 07:06:38 +07:00
|
|
|
u8 rate, zd_rate;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
int is_mgt = (ftype == IEEE80211_FTYPE_MGMT) != 0;
|
2006-11-22 07:06:48 +07:00
|
|
|
int is_multicast = is_multicast_ether_addr(hdr->addr1);
|
|
|
|
int short_preamble = ieee80211softmac_short_preamble_ok(softmac,
|
|
|
|
is_multicast, is_mgt);
|
|
|
|
int flags = 0;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2006-11-22 07:06:48 +07:00
|
|
|
/* FIXME: 802.11a? */
|
|
|
|
rate = ieee80211softmac_suggest_txrate(softmac, is_multicast, is_mgt);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2006-11-22 07:06:48 +07:00
|
|
|
if (short_preamble)
|
|
|
|
flags |= R2M_SHORT_PREAMBLE;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2006-11-22 07:06:38 +07:00
|
|
|
zd_rate = rate_to_zd_rate(rate);
|
2006-11-22 07:06:48 +07:00
|
|
|
cs->modulation = zd_rate_to_modulation(zd_rate, flags);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
|
|
|
|
struct ieee80211_hdr_4addr *header)
|
|
|
|
{
|
2006-11-22 07:06:48 +07:00
|
|
|
struct ieee80211softmac_device *softmac = ieee80211_priv(mac->netdev);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
unsigned int tx_length = le16_to_cpu(cs->tx_length);
|
|
|
|
u16 fctl = le16_to_cpu(header->frame_ctl);
|
|
|
|
u16 ftype = WLAN_FC_GET_TYPE(fctl);
|
|
|
|
u16 stype = WLAN_FC_GET_STYPE(fctl);
|
|
|
|
|
|
|
|
/*
|
2006-11-22 07:06:48 +07:00
|
|
|
* CONTROL TODO:
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
* - if backoff needed, enable bit 0
|
|
|
|
* - if burst (backoff not needed) disable bit 0
|
|
|
|
*/
|
|
|
|
|
|
|
|
cs->control = 0;
|
|
|
|
|
|
|
|
/* First fragment */
|
|
|
|
if (WLAN_GET_SEQ_FRAG(le16_to_cpu(header->seq_ctl)) == 0)
|
|
|
|
cs->control |= ZD_CS_NEED_RANDOM_BACKOFF;
|
|
|
|
|
|
|
|
/* Multicast */
|
|
|
|
if (is_multicast_ether_addr(header->addr1))
|
|
|
|
cs->control |= ZD_CS_MULTICAST;
|
|
|
|
|
|
|
|
/* PS-POLL */
|
|
|
|
if (stype == IEEE80211_STYPE_PSPOLL)
|
|
|
|
cs->control |= ZD_CS_PS_POLL_FRAME;
|
|
|
|
|
2006-11-22 07:06:48 +07:00
|
|
|
/* Unicast data frames over the threshold should have RTS */
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (!is_multicast_ether_addr(header->addr1) &&
|
2006-11-22 07:06:48 +07:00
|
|
|
ftype != IEEE80211_FTYPE_MGMT &&
|
|
|
|
tx_length > zd_netdev_ieee80211(mac->netdev)->rts)
|
|
|
|
cs->control |= ZD_CS_RTS;
|
|
|
|
|
|
|
|
/* Use CTS-to-self protection if required */
|
|
|
|
if (ZD_CS_TYPE(cs->modulation) == ZD_CS_OFDM &&
|
|
|
|
ieee80211softmac_protection_needed(softmac)) {
|
|
|
|
/* FIXME: avoid sending RTS *and* self-CTS, is that correct? */
|
|
|
|
cs->control &= ~ZD_CS_RTS;
|
|
|
|
cs->control |= ZD_CS_SELF_CTS;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* FIXME: Management frame? */
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fill_ctrlset(struct zd_mac *mac,
|
|
|
|
struct ieee80211_txb *txb,
|
|
|
|
int frag_num)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
struct sk_buff *skb = txb->fragments[frag_num];
|
|
|
|
struct ieee80211_hdr_4addr *hdr =
|
|
|
|
(struct ieee80211_hdr_4addr *) skb->data;
|
|
|
|
unsigned int frag_len = skb->len + IEEE80211_FCS_LEN;
|
|
|
|
unsigned int next_frag_len;
|
|
|
|
unsigned int packet_length;
|
|
|
|
struct zd_ctrlset *cs = (struct zd_ctrlset *)
|
|
|
|
skb_push(skb, sizeof(struct zd_ctrlset));
|
|
|
|
|
|
|
|
if (frag_num+1 < txb->nr_frags) {
|
|
|
|
next_frag_len = txb->fragments[frag_num+1]->len +
|
|
|
|
IEEE80211_FCS_LEN;
|
|
|
|
} else {
|
|
|
|
next_frag_len = 0;
|
|
|
|
}
|
|
|
|
ZD_ASSERT(frag_len <= 0xffff);
|
|
|
|
ZD_ASSERT(next_frag_len <= 0xffff);
|
|
|
|
|
|
|
|
cs_set_modulation(mac, cs, hdr);
|
|
|
|
|
|
|
|
cs->tx_length = cpu_to_le16(frag_len);
|
|
|
|
|
|
|
|
cs_set_control(mac, cs, hdr);
|
|
|
|
|
|
|
|
packet_length = frag_len + sizeof(struct zd_ctrlset) + 10;
|
|
|
|
ZD_ASSERT(packet_length <= 0xffff);
|
|
|
|
/* ZD1211B: Computing the length difference this way, gives us
|
|
|
|
* flexibility to compute the packet length.
|
|
|
|
*/
|
|
|
|
cs->packet_length = cpu_to_le16(mac->chip.is_zd1211b ?
|
|
|
|
packet_length - frag_len : packet_length);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* CURRENT LENGTH:
|
|
|
|
* - transmit frame length in microseconds
|
|
|
|
* - seems to be derived from frame length
|
|
|
|
* - see Cal_Us_Service() in zdinlinef.h
|
|
|
|
* - if macp->bTxBurstEnable is enabled, then multiply by 4
|
|
|
|
* - bTxBurstEnable is never set in the vendor driver
|
|
|
|
*
|
|
|
|
* SERVICE:
|
|
|
|
* - "for PLCP configuration"
|
|
|
|
* - always 0 except in some situations at 802.11b 11M
|
|
|
|
* - see line 53 of zdinlinef.h
|
|
|
|
*/
|
|
|
|
cs->service = 0;
|
|
|
|
r = zd_calc_tx_length_us(&cs->service, ZD_CS_RATE(cs->modulation),
|
|
|
|
le16_to_cpu(cs->tx_length));
|
|
|
|
if (r < 0)
|
|
|
|
return r;
|
|
|
|
cs->current_length = cpu_to_le16(r);
|
|
|
|
|
|
|
|
if (next_frag_len == 0) {
|
|
|
|
cs->next_frame_length = 0;
|
|
|
|
} else {
|
|
|
|
r = zd_calc_tx_length_us(NULL, ZD_CS_RATE(cs->modulation),
|
|
|
|
next_frag_len);
|
|
|
|
if (r < 0)
|
|
|
|
return r;
|
|
|
|
cs->next_frame_length = cpu_to_le16(r);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int zd_mac_tx(struct zd_mac *mac, struct ieee80211_txb *txb, int pri)
|
|
|
|
{
|
|
|
|
int i, r;
|
2007-01-29 08:00:03 +07:00
|
|
|
struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
|
|
|
for (i = 0; i < txb->nr_frags; i++) {
|
|
|
|
struct sk_buff *skb = txb->fragments[i];
|
|
|
|
|
|
|
|
r = fill_ctrlset(mac, txb, i);
|
2007-01-29 08:00:03 +07:00
|
|
|
if (r) {
|
|
|
|
ieee->stats.tx_dropped++;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
return r;
|
2007-01-29 08:00:03 +07:00
|
|
|
}
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
r = zd_usb_tx(&mac->chip.usb, skb->data, skb->len);
|
2007-01-29 08:00:03 +07:00
|
|
|
if (r) {
|
|
|
|
ieee->stats.tx_dropped++;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
return r;
|
2007-01-29 08:00:03 +07:00
|
|
|
}
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* FIXME: shouldn't this be handled by the upper layers? */
|
|
|
|
mac->netdev->trans_start = jiffies;
|
|
|
|
|
|
|
|
ieee80211_txb_free(txb);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct zd_rt_hdr {
|
|
|
|
struct ieee80211_radiotap_header rt_hdr;
|
|
|
|
u8 rt_flags;
|
2006-08-02 04:43:30 +07:00
|
|
|
u8 rt_rate;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
u16 rt_channel;
|
|
|
|
u16 rt_chbitmask;
|
2006-11-29 02:16:37 +07:00
|
|
|
} __attribute__((packed));
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
|
|
|
static void fill_rt_header(void *buffer, struct zd_mac *mac,
|
|
|
|
const struct ieee80211_rx_stats *stats,
|
|
|
|
const struct rx_status *status)
|
|
|
|
{
|
|
|
|
struct zd_rt_hdr *hdr = buffer;
|
|
|
|
|
|
|
|
hdr->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
|
|
|
|
hdr->rt_hdr.it_pad = 0;
|
|
|
|
hdr->rt_hdr.it_len = cpu_to_le16(sizeof(struct zd_rt_hdr));
|
|
|
|
hdr->rt_hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
|
|
|
|
(1 << IEEE80211_RADIOTAP_CHANNEL) |
|
|
|
|
(1 << IEEE80211_RADIOTAP_RATE));
|
|
|
|
|
|
|
|
hdr->rt_flags = 0;
|
|
|
|
if (status->decryption_type & (ZD_RX_WEP64|ZD_RX_WEP128|ZD_RX_WEP256))
|
|
|
|
hdr->rt_flags |= IEEE80211_RADIOTAP_F_WEP;
|
|
|
|
|
2006-08-02 04:43:30 +07:00
|
|
|
hdr->rt_rate = stats->rate / 5;
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
/* FIXME: 802.11a */
|
|
|
|
hdr->rt_channel = cpu_to_le16(ieee80211chan2mhz(
|
|
|
|
_zd_chip_get_channel(&mac->chip)));
|
|
|
|
hdr->rt_chbitmask = cpu_to_le16(IEEE80211_CHAN_2GHZ |
|
|
|
|
((status->frame_status & ZD_RX_FRAME_MODULATION_MASK) ==
|
|
|
|
ZD_RX_OFDM ? IEEE80211_CHAN_OFDM : IEEE80211_CHAN_CCK));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns 1 if the data packet is for us and 0 otherwise. */
|
|
|
|
static int is_data_packet_for_us(struct ieee80211_device *ieee,
|
|
|
|
struct ieee80211_hdr_4addr *hdr)
|
|
|
|
{
|
|
|
|
struct net_device *netdev = ieee->dev;
|
|
|
|
u16 fc = le16_to_cpu(hdr->frame_ctl);
|
|
|
|
|
|
|
|
ZD_ASSERT(WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA);
|
|
|
|
|
|
|
|
switch (ieee->iw_mode) {
|
|
|
|
case IW_MODE_ADHOC:
|
|
|
|
if ((fc & (IEEE80211_FCTL_TODS|IEEE80211_FCTL_FROMDS)) != 0 ||
|
|
|
|
memcmp(hdr->addr3, ieee->bssid, ETH_ALEN) != 0)
|
|
|
|
return 0;
|
|
|
|
break;
|
|
|
|
case IW_MODE_AUTO:
|
|
|
|
case IW_MODE_INFRA:
|
|
|
|
if ((fc & (IEEE80211_FCTL_TODS|IEEE80211_FCTL_FROMDS)) !=
|
|
|
|
IEEE80211_FCTL_FROMDS ||
|
|
|
|
memcmp(hdr->addr2, ieee->bssid, ETH_ALEN) != 0)
|
|
|
|
return 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
ZD_ASSERT(ieee->iw_mode != IW_MODE_MONITOR);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return memcmp(hdr->addr1, netdev->dev_addr, ETH_ALEN) == 0 ||
|
2006-12-01 07:58:07 +07:00
|
|
|
(is_multicast_ether_addr(hdr->addr1) &&
|
|
|
|
memcmp(hdr->addr3, netdev->dev_addr, ETH_ALEN) != 0) ||
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
(netdev->flags & IFF_PROMISC);
|
|
|
|
}
|
|
|
|
|
2006-11-22 07:05:53 +07:00
|
|
|
/* Filters received packets. The function returns 1 if the packet should be
|
|
|
|
* forwarded to ieee80211_rx(). If the packet should be ignored the function
|
|
|
|
* returns 0. If an invalid packet is found the function returns -EINVAL.
|
|
|
|
*
|
|
|
|
* The function calls ieee80211_rx_mgt() directly.
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
*
|
|
|
|
* It has been based on ieee80211_rx_any.
|
|
|
|
*/
|
|
|
|
static int filter_rx(struct ieee80211_device *ieee,
|
|
|
|
const u8 *buffer, unsigned int length,
|
|
|
|
struct ieee80211_rx_stats *stats)
|
|
|
|
{
|
|
|
|
struct ieee80211_hdr_4addr *hdr;
|
|
|
|
u16 fc;
|
|
|
|
|
|
|
|
if (ieee->iw_mode == IW_MODE_MONITOR)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
hdr = (struct ieee80211_hdr_4addr *)buffer;
|
|
|
|
fc = le16_to_cpu(hdr->frame_ctl);
|
|
|
|
if ((fc & IEEE80211_FCTL_VERS) != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
switch (WLAN_FC_GET_TYPE(fc)) {
|
|
|
|
case IEEE80211_FTYPE_MGMT:
|
|
|
|
if (length < sizeof(struct ieee80211_hdr_3addr))
|
|
|
|
return -EINVAL;
|
|
|
|
ieee80211_rx_mgt(ieee, hdr, stats);
|
|
|
|
return 0;
|
|
|
|
case IEEE80211_FTYPE_CTL:
|
|
|
|
return 0;
|
|
|
|
case IEEE80211_FTYPE_DATA:
|
2006-11-22 07:05:53 +07:00
|
|
|
/* Ignore invalid short buffers */
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (length < sizeof(struct ieee80211_hdr_3addr))
|
|
|
|
return -EINVAL;
|
|
|
|
return is_data_packet_for_us(ieee, hdr);
|
|
|
|
}
|
|
|
|
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2006-08-30 05:50:29 +07:00
|
|
|
static void update_qual_rssi(struct zd_mac *mac,
|
|
|
|
const u8 *buffer, unsigned int length,
|
|
|
|
u8 qual_percent, u8 rssi_percent)
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
2006-08-30 05:50:29 +07:00
|
|
|
struct ieee80211_hdr_3addr *hdr;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
hdr = (struct ieee80211_hdr_3addr *)buffer;
|
|
|
|
if (length < offsetof(struct ieee80211_hdr_3addr, addr3))
|
|
|
|
return;
|
|
|
|
if (memcmp(hdr->addr2, zd_mac_to_ieee80211(mac)->bssid, ETH_ALEN) != 0)
|
|
|
|
return;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
|
|
|
spin_lock_irqsave(&mac->lock, flags);
|
2006-08-30 05:50:29 +07:00
|
|
|
i = mac->stats_count % ZD_MAC_STATS_BUFFER_SIZE;
|
|
|
|
mac->qual_buffer[i] = qual_percent;
|
|
|
|
mac->rssi_buffer[i] = rssi_percent;
|
|
|
|
mac->stats_count++;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
spin_unlock_irqrestore(&mac->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fill_rx_stats(struct ieee80211_rx_stats *stats,
|
|
|
|
const struct rx_status **pstatus,
|
|
|
|
struct zd_mac *mac,
|
|
|
|
const u8 *buffer, unsigned int length)
|
|
|
|
{
|
|
|
|
const struct rx_status *status;
|
|
|
|
|
|
|
|
*pstatus = status = zd_tail(buffer, length, sizeof(struct rx_status));
|
|
|
|
if (status->frame_status & ZD_RX_ERROR) {
|
2007-01-29 08:00:03 +07:00
|
|
|
struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
|
|
|
|
ieee->stats.rx_errors++;
|
|
|
|
if (status->frame_status & ZD_RX_TIMEOUT_ERROR)
|
|
|
|
ieee->stats.rx_missed_errors++;
|
|
|
|
else if (status->frame_status & ZD_RX_FIFO_OVERRUN_ERROR)
|
|
|
|
ieee->stats.rx_fifo_errors++;
|
|
|
|
else if (status->frame_status & ZD_RX_DECRYPTION_ERROR)
|
|
|
|
ieee->ieee_stats.rx_discards_undecryptable++;
|
|
|
|
else if (status->frame_status & ZD_RX_CRC32_ERROR) {
|
|
|
|
ieee->stats.rx_crc_errors++;
|
|
|
|
ieee->ieee_stats.rx_fcs_errors++;
|
|
|
|
}
|
|
|
|
else if (status->frame_status & ZD_RX_CRC16_ERROR)
|
|
|
|
ieee->stats.rx_crc_errors++;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
2007-01-29 08:00:03 +07:00
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
memset(stats, 0, sizeof(struct ieee80211_rx_stats));
|
|
|
|
stats->len = length - (ZD_PLCP_HEADER_SIZE + IEEE80211_FCS_LEN +
|
|
|
|
+ sizeof(struct rx_status));
|
|
|
|
/* FIXME: 802.11a */
|
|
|
|
stats->freq = IEEE80211_24GHZ_BAND;
|
|
|
|
stats->received_channel = _zd_chip_get_channel(&mac->chip);
|
|
|
|
stats->rssi = zd_rx_strength_percent(status->signal_strength);
|
|
|
|
stats->signal = zd_rx_qual_percent(buffer,
|
|
|
|
length - sizeof(struct rx_status),
|
|
|
|
status);
|
|
|
|
stats->mask = IEEE80211_STATMASK_RSSI | IEEE80211_STATMASK_SIGNAL;
|
|
|
|
stats->rate = zd_rx_rate(buffer, status);
|
|
|
|
if (stats->rate)
|
|
|
|
stats->mask |= IEEE80211_STATMASK_RATE;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-12-11 02:13:12 +07:00
|
|
|
static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb)
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{
|
|
|
|
int r;
|
|
|
|
struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
|
|
|
|
struct ieee80211_rx_stats stats;
|
|
|
|
const struct rx_status *status;
|
|
|
|
|
2006-12-11 02:13:12 +07:00
|
|
|
if (skb->len < ZD_PLCP_HEADER_SIZE + IEEE80211_1ADDR_LEN +
|
|
|
|
IEEE80211_FCS_LEN + sizeof(struct rx_status))
|
|
|
|
{
|
2007-01-29 08:00:03 +07:00
|
|
|
ieee->stats.rx_errors++;
|
|
|
|
ieee->stats.rx_length_errors++;
|
2006-12-11 02:13:12 +07:00
|
|
|
goto free_skb;
|
|
|
|
}
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2006-12-11 02:13:12 +07:00
|
|
|
r = fill_rx_stats(&stats, &status, mac, skb->data, skb->len);
|
|
|
|
if (r) {
|
2007-01-29 08:00:03 +07:00
|
|
|
/* Only packets with rx errors are included here.
|
|
|
|
* The error stats have already been set in fill_rx_stats.
|
|
|
|
*/
|
2006-12-11 02:13:12 +07:00
|
|
|
goto free_skb;
|
|
|
|
}
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2006-12-11 02:13:12 +07:00
|
|
|
__skb_pull(skb, ZD_PLCP_HEADER_SIZE);
|
|
|
|
__skb_trim(skb, skb->len -
|
|
|
|
(IEEE80211_FCS_LEN + sizeof(struct rx_status)));
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2006-12-11 02:13:12 +07:00
|
|
|
update_qual_rssi(mac, skb->data, skb->len, stats.signal,
|
|
|
|
status->signal_strength);
|
2006-08-30 05:50:29 +07:00
|
|
|
|
2006-12-11 02:13:12 +07:00
|
|
|
r = filter_rx(ieee, skb->data, skb->len, &stats);
|
|
|
|
if (r <= 0) {
|
2007-01-29 08:00:03 +07:00
|
|
|
if (r < 0) {
|
|
|
|
ieee->stats.rx_errors++;
|
2006-12-11 02:13:12 +07:00
|
|
|
dev_dbg_f(zd_mac_dev(mac), "Error in packet.\n");
|
2007-01-29 08:00:03 +07:00
|
|
|
}
|
2006-12-11 02:13:12 +07:00
|
|
|
goto free_skb;
|
|
|
|
}
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
|
|
|
if (ieee->iw_mode == IW_MODE_MONITOR)
|
2006-12-11 02:13:12 +07:00
|
|
|
fill_rt_header(skb_push(skb, sizeof(struct zd_rt_hdr)), mac,
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
&stats, status);
|
|
|
|
|
|
|
|
r = ieee80211_rx(ieee, skb, &stats);
|
2006-12-11 02:13:12 +07:00
|
|
|
if (r)
|
|
|
|
return;
|
|
|
|
free_skb:
|
|
|
|
/* We are always in a soft irq. */
|
|
|
|
dev_kfree_skb(skb);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void do_rx(unsigned long mac_ptr)
|
|
|
|
{
|
|
|
|
struct zd_mac *mac = (struct zd_mac *)mac_ptr;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
|
|
while ((skb = skb_dequeue(&mac->rx_queue)) != NULL)
|
|
|
|
zd_mac_rx(mac, skb);
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_mac_rx_irq(struct zd_mac *mac, const u8 *buffer, unsigned int length)
|
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
|
|
skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length);
|
|
|
|
if (!skb) {
|
2007-01-29 08:00:03 +07:00
|
|
|
struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
|
2006-12-11 02:13:12 +07:00
|
|
|
dev_warn(zd_mac_dev(mac), "Could not allocate skb.\n");
|
2007-01-29 08:00:03 +07:00
|
|
|
ieee->stats.rx_dropped++;
|
2006-12-11 02:13:12 +07:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
skb_reserve(skb, sizeof(struct zd_rt_hdr));
|
|
|
|
memcpy(__skb_put(skb, length), buffer, length);
|
|
|
|
skb_queue_tail(&mac->rx_queue, skb);
|
|
|
|
tasklet_schedule(&mac->rx_tasklet);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int netdev_tx(struct ieee80211_txb *txb, struct net_device *netdev,
|
|
|
|
int pri)
|
|
|
|
{
|
|
|
|
return zd_mac_tx(zd_netdev_mac(netdev), txb, pri);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_security(struct net_device *netdev,
|
|
|
|
struct ieee80211_security *sec)
|
|
|
|
{
|
|
|
|
struct ieee80211_device *ieee = zd_netdev_ieee80211(netdev);
|
|
|
|
struct ieee80211_security *secinfo = &ieee->sec;
|
|
|
|
int keyidx;
|
|
|
|
|
|
|
|
dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), "\n");
|
|
|
|
|
|
|
|
for (keyidx = 0; keyidx<WEP_KEYS; keyidx++)
|
|
|
|
if (sec->flags & (1<<keyidx)) {
|
|
|
|
secinfo->encode_alg[keyidx] = sec->encode_alg[keyidx];
|
|
|
|
secinfo->key_sizes[keyidx] = sec->key_sizes[keyidx];
|
|
|
|
memcpy(secinfo->keys[keyidx], sec->keys[keyidx],
|
|
|
|
SCM_KEY_LEN);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sec->flags & SEC_ACTIVE_KEY) {
|
|
|
|
secinfo->active_key = sec->active_key;
|
|
|
|
dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)),
|
|
|
|
" .active_key = %d\n", sec->active_key);
|
|
|
|
}
|
|
|
|
if (sec->flags & SEC_UNICAST_GROUP) {
|
|
|
|
secinfo->unicast_uses_group = sec->unicast_uses_group;
|
|
|
|
dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)),
|
|
|
|
" .unicast_uses_group = %d\n",
|
|
|
|
sec->unicast_uses_group);
|
|
|
|
}
|
|
|
|
if (sec->flags & SEC_LEVEL) {
|
|
|
|
secinfo->level = sec->level;
|
|
|
|
dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)),
|
|
|
|
" .level = %d\n", sec->level);
|
|
|
|
}
|
|
|
|
if (sec->flags & SEC_ENABLED) {
|
|
|
|
secinfo->enabled = sec->enabled;
|
|
|
|
dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)),
|
|
|
|
" .enabled = %d\n", sec->enabled);
|
|
|
|
}
|
|
|
|
if (sec->flags & SEC_ENCRYPT) {
|
|
|
|
secinfo->encrypt = sec->encrypt;
|
|
|
|
dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)),
|
|
|
|
" .encrypt = %d\n", sec->encrypt);
|
|
|
|
}
|
|
|
|
if (sec->flags & SEC_AUTH_MODE) {
|
|
|
|
secinfo->auth_mode = sec->auth_mode;
|
|
|
|
dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)),
|
|
|
|
" .auth_mode = %d\n", sec->auth_mode);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ieee_init(struct ieee80211_device *ieee)
|
|
|
|
{
|
|
|
|
ieee->mode = IEEE_B | IEEE_G;
|
|
|
|
ieee->freq_band = IEEE80211_24GHZ_BAND;
|
|
|
|
ieee->modulation = IEEE80211_OFDM_MODULATION | IEEE80211_CCK_MODULATION;
|
|
|
|
ieee->tx_headroom = sizeof(struct zd_ctrlset);
|
|
|
|
ieee->set_security = set_security;
|
|
|
|
ieee->hard_start_xmit = netdev_tx;
|
|
|
|
|
|
|
|
/* Software encryption/decryption for now */
|
|
|
|
ieee->host_build_iv = 0;
|
|
|
|
ieee->host_encrypt = 1;
|
|
|
|
ieee->host_decrypt = 1;
|
|
|
|
|
|
|
|
/* FIXME: default to managed mode, until ieee80211 and zd1211rw can
|
|
|
|
* correctly support AUTO */
|
|
|
|
ieee->iw_mode = IW_MODE_INFRA;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void softmac_init(struct ieee80211softmac_device *sm)
|
|
|
|
{
|
|
|
|
sm->set_channel = set_channel;
|
2006-11-22 07:06:48 +07:00
|
|
|
sm->bssinfo_change = bssinfo_change;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
struct iw_statistics *zd_mac_get_wireless_stats(struct net_device *ndev)
|
|
|
|
{
|
|
|
|
struct zd_mac *mac = zd_netdev_mac(ndev);
|
|
|
|
struct iw_statistics *iw_stats = &mac->iw_stats;
|
2006-08-30 05:50:29 +07:00
|
|
|
unsigned int i, count, qual_total, rssi_total;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
|
|
|
memset(iw_stats, 0, sizeof(struct iw_statistics));
|
|
|
|
/* We are not setting the status, because ieee->state is not updated
|
|
|
|
* at all and this driver doesn't track authentication state.
|
|
|
|
*/
|
|
|
|
spin_lock_irq(&mac->lock);
|
2006-08-30 05:50:29 +07:00
|
|
|
count = mac->stats_count < ZD_MAC_STATS_BUFFER_SIZE ?
|
|
|
|
mac->stats_count : ZD_MAC_STATS_BUFFER_SIZE;
|
|
|
|
qual_total = rssi_total = 0;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
|
|
qual_total += mac->qual_buffer[i];
|
|
|
|
rssi_total += mac->rssi_buffer[i];
|
|
|
|
}
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
spin_unlock_irq(&mac->lock);
|
2006-08-30 05:50:29 +07:00
|
|
|
iw_stats->qual.updated = IW_QUAL_NOISE_INVALID;
|
|
|
|
if (count > 0) {
|
|
|
|
iw_stats->qual.qual = qual_total / count;
|
|
|
|
iw_stats->qual.level = rssi_total / count;
|
|
|
|
iw_stats->qual.updated |=
|
|
|
|
IW_QUAL_QUAL_UPDATED|IW_QUAL_LEVEL_UPDATED;
|
|
|
|
} else {
|
|
|
|
iw_stats->qual.updated |=
|
|
|
|
IW_QUAL_QUAL_INVALID|IW_QUAL_LEVEL_INVALID;
|
|
|
|
}
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
/* TODO: update counter */
|
|
|
|
return iw_stats;
|
|
|
|
}
|
|
|
|
|
2006-09-13 08:42:38 +07:00
|
|
|
#define LINK_LED_WORK_DELAY HZ
|
|
|
|
|
2006-11-22 21:57:56 +07:00
|
|
|
static void link_led_handler(struct work_struct *work)
|
2006-09-13 08:42:38 +07:00
|
|
|
{
|
2006-11-22 21:57:56 +07:00
|
|
|
struct zd_mac *mac =
|
|
|
|
container_of(work, struct zd_mac, housekeeping.link_led_work.work);
|
2006-09-13 08:42:38 +07:00
|
|
|
struct zd_chip *chip = &mac->chip;
|
|
|
|
struct ieee80211softmac_device *sm = ieee80211_priv(mac->netdev);
|
|
|
|
int is_associated;
|
|
|
|
int r;
|
|
|
|
|
|
|
|
spin_lock_irq(&mac->lock);
|
2006-10-18 00:47:40 +07:00
|
|
|
is_associated = sm->associnfo.associated != 0;
|
2006-09-13 08:42:38 +07:00
|
|
|
spin_unlock_irq(&mac->lock);
|
|
|
|
|
|
|
|
r = zd_chip_control_leds(chip,
|
|
|
|
is_associated ? LED_ASSOCIATED : LED_SCANNING);
|
|
|
|
if (r)
|
|
|
|
dev_err(zd_mac_dev(mac), "zd_chip_control_leds error %d\n", r);
|
|
|
|
|
|
|
|
queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work,
|
|
|
|
LINK_LED_WORK_DELAY);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void housekeeping_init(struct zd_mac *mac)
|
|
|
|
{
|
2006-11-22 21:57:56 +07:00
|
|
|
INIT_DELAYED_WORK(&mac->housekeeping.link_led_work, link_led_handler);
|
2006-09-13 08:42:38 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void housekeeping_enable(struct zd_mac *mac)
|
|
|
|
{
|
|
|
|
dev_dbg_f(zd_mac_dev(mac), "\n");
|
|
|
|
queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work,
|
|
|
|
0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void housekeeping_disable(struct zd_mac *mac)
|
|
|
|
{
|
|
|
|
dev_dbg_f(zd_mac_dev(mac), "\n");
|
|
|
|
cancel_rearming_delayed_workqueue(zd_workqueue,
|
|
|
|
&mac->housekeeping.link_led_work);
|
|
|
|
zd_chip_control_leds(&mac->chip, LED_OFF);
|
|
|
|
}
|