linux_dsm_epyc7002/drivers/gpu/drm/i915/gt/intel_lrc.h

117 lines
4.2 KiB
C
Raw Normal View History

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#ifndef _INTEL_LRC_H_
#define _INTEL_LRC_H_
#include "intel_engine.h"
/* Execlists regs */
#define RING_ELSP(base) _MMIO((base) + 0x230)
#define RING_EXECLIST_STATUS_LO(base) _MMIO((base) + 0x234)
#define RING_EXECLIST_STATUS_HI(base) _MMIO((base) + 0x234 + 4)
#define RING_CONTEXT_CONTROL(base) _MMIO((base) + 0x244)
#define CTX_CTRL_INHIBIT_SYN_CTX_SWITCH (1 << 3)
#define CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT (1 << 0)
#define CTX_CTRL_RS_CTX_ENABLE (1 << 1)
#define CTX_CTRL_ENGINE_CTX_SAVE_INHIBIT (1 << 2)
#define RING_CONTEXT_STATUS_PTR(base) _MMIO((base) + 0x3a0)
#define RING_EXECLIST_SQ_CONTENTS(base) _MMIO((base) + 0x510)
#define RING_EXECLIST_CONTROL(base) _MMIO((base) + 0x550)
drm/i915/icl: Enhanced execution list support Enhanced Execlists is an upgraded version of execlists which supports up to 8 ports. The lrcs to be submitted are written to a submit queue (the ExecLists Submission Queue - ELSQ), which is then loaded on the HW. When writing to the ELSP register, the lrcs are written cyclically in the queue from position 0 to position 7. Alternatively, it is possible to write directly in the individual positions of the queue using the ELSQC registers. To be able to re-use all the existing code we're using the latter method and we're currently limiting ourself to only using 2 elements. v2: Rebase. v3: Switch from !IS_GEN11 to GEN < 11 (Daniele Ceraolo Spurio). v4: Use the elsq registers instead of elsp. (Daniele Ceraolo Spurio) v5: Reword commit, rename regs to be closer to specs, turn off preemption (Daniele), reuse engine->execlists.elsp (Chris) v6: use has_logical_ring_elsq to differentiate the new paths v7: add preemption support, rename els to submit_reg (Chris) v8: save the ctrl register inside the execlists struct, drop CSB handling updates (superseded by preempt_complete_status) (Chris) v9: s/drm_i915_gem_request/i915_request (Mika) v10: resolved conflict in inject_preempt_context (Mika) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-4-mika.kuoppala@linux.intel.com
2018-03-02 23:14:59 +07:00
#define EL_CTRL_LOAD (1 << 0)
/* The docs specify that the write pointer wraps around after 5h, "After status
* is written out to the last available status QW at offset 5h, this pointer
* wraps to 0."
*
* Therefore, one must infer than even though there are 3 bits available, 6 and
* 7 appear to be * reserved.
*/
#define GEN8_CSB_ENTRIES 6
#define GEN8_CSB_PTR_MASK 0x7
#define GEN8_CSB_READ_PTR_MASK (GEN8_CSB_PTR_MASK << 8)
#define GEN8_CSB_WRITE_PTR_MASK (GEN8_CSB_PTR_MASK << 0)
#define GEN11_CSB_ENTRIES 12
#define GEN11_CSB_PTR_MASK 0xf
#define GEN11_CSB_READ_PTR_MASK (GEN11_CSB_PTR_MASK << 8)
#define GEN11_CSB_WRITE_PTR_MASK (GEN11_CSB_PTR_MASK << 0)
drm/i915: Introduce execlist context status change notification This patch introduces an approach to track the execlist context status change. GVT-g uses GVT context as the "shadow context". The content inside GVT context will be copied back to guest after the context is idle. And GVT-g has to know the status of the execlist context. This function is configurable when creating a new GEM context. Currently, Only GVT-g will create the "status-change-notification" enabled GEM context. v10: - Fix the identation. (Joonas) v8: - Remove the boolean flag in struct i915_gem_context. (Joonas) v7: - Remove per-engine ctx status notifiers. Use one status notifier for all engines. (Joonas) - Add prefix "INTEL_" for related definitions. (Joonas) - Refine the comments in execlists_context_status_change(). (Joonas) v6: - When !CONFIG_DRM_I915_GVT, make GVT code as dead code then compiler could automatically eliminate them for us. (Chris) - Always initialize the notifier header, so it could be switched on/off at runtime. (Chris) v5: - Only compile this feature when CONFIG_DRM_I915_GVT is enabled.(Tvrtko) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v8) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-8-git-send-email-zhi.a.wang@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-06-16 19:07:03 +07:00
enum {
INTEL_CONTEXT_SCHEDULE_IN = 0,
INTEL_CONTEXT_SCHEDULE_OUT,
INTEL_CONTEXT_SCHEDULE_PREEMPTED,
drm/i915: Introduce execlist context status change notification This patch introduces an approach to track the execlist context status change. GVT-g uses GVT context as the "shadow context". The content inside GVT context will be copied back to guest after the context is idle. And GVT-g has to know the status of the execlist context. This function is configurable when creating a new GEM context. Currently, Only GVT-g will create the "status-change-notification" enabled GEM context. v10: - Fix the identation. (Joonas) v8: - Remove the boolean flag in struct i915_gem_context. (Joonas) v7: - Remove per-engine ctx status notifiers. Use one status notifier for all engines. (Joonas) - Add prefix "INTEL_" for related definitions. (Joonas) - Refine the comments in execlists_context_status_change(). (Joonas) v6: - When !CONFIG_DRM_I915_GVT, make GVT code as dead code then compiler could automatically eliminate them for us. (Chris) - Always initialize the notifier header, so it could be switched on/off at runtime. (Chris) v5: - Only compile this feature when CONFIG_DRM_I915_GVT is enabled.(Tvrtko) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v8) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-8-git-send-email-zhi.a.wang@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-06-16 19:07:03 +07:00
};
/* Logical Rings */
void intel_logical_ring_cleanup(struct intel_engine_cs *engine);
int logical_render_ring_init(struct intel_engine_cs *engine);
int logical_xcs_ring_init(struct intel_engine_cs *engine);
/* Logical Ring Contexts */
drm/i915: Integrate GuC-based command submission GuC-based submission is mostly the same as execlist mode, up to intel_logical_ring_advance_and_submit(), where the context being dispatched would be added to the execlist queue; at this point we submit the context to the GuC backend instead. There are, however, a few other changes also required, notably: 1. Contexts must be pinned at GGTT addresses accessible by the GuC i.e. NOT in the range [0..WOPCM_SIZE), so we have to add the PIN_OFFSET_BIAS flag to the relevant GGTT-pinning calls. 2. The GuC's TLB must be invalidated after a context is pinned at a new GGTT address. 3. GuC firmware uses the one page before Ring Context as shared data. Therefore, whenever driver wants to get base address of LRC, we will offset one page for it. LRC_PPHWSP_PN is defined as the page number of LRCA. 4. In the work queue used to pass requests to the GuC, the GuC firmware requires the ring-tail-offset to be represented as an 11-bit value, expressed in QWords. Therefore, the ringbuffer size must be reduced to the representable range (4 pages). v2: Defer adding #defines until needed [Chris Wilson] Rationalise type declarations [Chris Wilson] v4: Squashed kerneldoc patch into here [Daniel Vetter] v5: Update request->tail in code common to both GuC and execlist modes. Add a private version of lr_context_update(), as sharing the execlist version leads to race conditions when the CPU and the GuC both update TAIL in the context image. Conversion of error-captured HWS page to string must account for offset from start of object to actual HWS (LRC_PPHWSP_PN). Issue: VIZ-4884 Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 21:43:43 +07:00
drm/i915/lrc: Clarify the format of the context image Not only the context image consist of two parts (the PPHWSP, and the logical context state), but we also allocate a header at the start of for sharing data with GuC. Thus every lrc looks like this: | [guc] | [hwsp] [logical state] | |<- our header ->|<- context image ->| So far, we have oversimplified whenever we use each of these parts of the context, just because the GuC header happens to be in page 0, and the (PP)HWSP is in page 1. But this had led to using the same define for more than one meaning (as a page index in the lrc and as 1 page). This patch adds defines for the GuC shared page, the PPHWSP page and the start of the logical state. It also updated the places where the old define was being used. Since we are not changing the size (or format) of the context, there are no functional changes. v2: Use PPHWSP index for hws again. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/20170712193032.27080-1-michel.thierry@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-1-chris@chris-wilson.co.uk
2017-09-13 15:56:00 +07:00
/*
* We allocate a header at the start of the context image for our own
* use, therefore the actual location of the logical state is offset
* from the start of the VMA. The layout is
*
* | [guc] | [hwsp] [logical state] |
* |<- our header ->|<- context image ->|
*
*/
/* The first page is used for sharing data with the GuC */
drm/i915: Integrate GuC-based command submission GuC-based submission is mostly the same as execlist mode, up to intel_logical_ring_advance_and_submit(), where the context being dispatched would be added to the execlist queue; at this point we submit the context to the GuC backend instead. There are, however, a few other changes also required, notably: 1. Contexts must be pinned at GGTT addresses accessible by the GuC i.e. NOT in the range [0..WOPCM_SIZE), so we have to add the PIN_OFFSET_BIAS flag to the relevant GGTT-pinning calls. 2. The GuC's TLB must be invalidated after a context is pinned at a new GGTT address. 3. GuC firmware uses the one page before Ring Context as shared data. Therefore, whenever driver wants to get base address of LRC, we will offset one page for it. LRC_PPHWSP_PN is defined as the page number of LRCA. 4. In the work queue used to pass requests to the GuC, the GuC firmware requires the ring-tail-offset to be represented as an 11-bit value, expressed in QWords. Therefore, the ringbuffer size must be reduced to the representable range (4 pages). v2: Defer adding #defines until needed [Chris Wilson] Rationalise type declarations [Chris Wilson] v4: Squashed kerneldoc patch into here [Daniel Vetter] v5: Update request->tail in code common to both GuC and execlist modes. Add a private version of lr_context_update(), as sharing the execlist version leads to race conditions when the CPU and the GuC both update TAIL in the context image. Conversion of error-captured HWS page to string must account for offset from start of object to actual HWS (LRC_PPHWSP_PN). Issue: VIZ-4884 Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 21:43:43 +07:00
#define LRC_GUCSHR_PN (0)
drm/i915/lrc: Clarify the format of the context image Not only the context image consist of two parts (the PPHWSP, and the logical context state), but we also allocate a header at the start of for sharing data with GuC. Thus every lrc looks like this: | [guc] | [hwsp] [logical state] | |<- our header ->|<- context image ->| So far, we have oversimplified whenever we use each of these parts of the context, just because the GuC header happens to be in page 0, and the (PP)HWSP is in page 1. But this had led to using the same define for more than one meaning (as a page index in the lrc and as 1 page). This patch adds defines for the GuC shared page, the PPHWSP page and the start of the logical state. It also updated the places where the old define was being used. Since we are not changing the size (or format) of the context, there are no functional changes. v2: Use PPHWSP index for hws again. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/20170712193032.27080-1-michel.thierry@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-1-chris@chris-wilson.co.uk
2017-09-13 15:56:00 +07:00
#define LRC_GUCSHR_SZ (1)
/* At the start of the context image is its per-process HWS page */
#define LRC_PPHWSP_PN (LRC_GUCSHR_PN + LRC_GUCSHR_SZ)
#define LRC_PPHWSP_SZ (1)
/* Finally we have the logical state for the context */
#define LRC_STATE_PN (LRC_PPHWSP_PN + LRC_PPHWSP_SZ)
/*
* Currently we include the PPHWSP in __intel_engine_context_size() so
* the size of the header is synonymous with the start of the PPHWSP.
*/
#define LRC_HEADER_PAGES LRC_PPHWSP_PN
drm/i915: Integrate GuC-based command submission GuC-based submission is mostly the same as execlist mode, up to intel_logical_ring_advance_and_submit(), where the context being dispatched would be added to the execlist queue; at this point we submit the context to the GuC backend instead. There are, however, a few other changes also required, notably: 1. Contexts must be pinned at GGTT addresses accessible by the GuC i.e. NOT in the range [0..WOPCM_SIZE), so we have to add the PIN_OFFSET_BIAS flag to the relevant GGTT-pinning calls. 2. The GuC's TLB must be invalidated after a context is pinned at a new GGTT address. 3. GuC firmware uses the one page before Ring Context as shared data. Therefore, whenever driver wants to get base address of LRC, we will offset one page for it. LRC_PPHWSP_PN is defined as the page number of LRCA. 4. In the work queue used to pass requests to the GuC, the GuC firmware requires the ring-tail-offset to be represented as an 11-bit value, expressed in QWords. Therefore, the ringbuffer size must be reduced to the representable range (4 pages). v2: Defer adding #defines until needed [Chris Wilson] Rationalise type declarations [Chris Wilson] v4: Squashed kerneldoc patch into here [Daniel Vetter] v5: Update request->tail in code common to both GuC and execlist modes. Add a private version of lr_context_update(), as sharing the execlist version leads to race conditions when the CPU and the GuC both update TAIL in the context image. Conversion of error-captured HWS page to string must account for offset from start of object to actual HWS (LRC_PPHWSP_PN). Issue: VIZ-4884 Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 21:43:43 +07:00
struct drm_printer;
drm/i915: Unify active context tracking between legacy/execlists/guc The requests conversion introduced a nasty bug where we could generate a new request in the middle of constructing a request if we needed to idle the system in order to evict space for a context. The request to idle would be executed (and waited upon) before the current one, creating a minor havoc in the seqno accounting, as we will consider the current request to already be completed (prior to deferred seqno assignment) but ring->last_retired_head would have been updated and still could allow us to overwrite the current request before execution. We also employed two different mechanisms to track the active context until it was switched out. The legacy method allowed for waiting upon an active context (it could forcibly evict any vma, including context's), but the execlists method took a step backwards by pinning the vma for the entire active lifespan of the context (the only way to evict was to idle the entire GPU, not individual contexts). However, to circumvent the tricky issue of locking (i.e. we cannot take struct_mutex at the time of i915_gem_request_submit(), where we would want to move the previous context onto the active tracker and unpin it), we take the execlists approach and keep the contexts pinned until retirement. The benefit of the execlists approach, more important for execlists than legacy, was the reduction in work in pinning the context for each request - as the context was kept pinned until idle, it could short circuit the pinning for all active contexts. We introduce new engine vfuncs to pin and unpin the context respectively. The context is pinned at the start of the request, and only unpinned when the following request is retired (this ensures that the context is idle and coherent in main memory before we unpin it). We move the engine->last_context tracking into the retirement itself (rather than during request submission) in order to allow the submission to be reordered or unwound without undue difficultly. And finally an ulterior motive for unifying context handling was to prepare for mock requests. v2: Rename to last_retired_context, split out legacy_context tracking for MI_SET_CONTEXT. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-3-chris@chris-wilson.co.uk
2016-12-18 22:37:20 +07:00
struct drm_i915_private;
void intel_execlists_set_default_submission(struct intel_engine_cs *engine);
void intel_lr_context_reset(struct intel_engine_cs *engine,
struct intel_context *ce,
u32 head,
bool scrub);
void intel_execlists_show_requests(struct intel_engine_cs *engine,
struct drm_printer *m,
void (*show_request)(struct drm_printer *m,
struct i915_request *rq,
const char *prefix),
unsigned int max);
#endif /* _INTEL_LRC_H_ */