linux_dsm_epyc7002/drivers/net/ethernet/mellanox/mlx4/main.c

2439 lines
66 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
* Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
* Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/io-mapping.h>
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/mlx4/device.h>
#include <linux/mlx4/doorbell.h>
#include "mlx4.h"
#include "fw.h"
#include "icm.h"
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("Mellanox ConnectX HCA low-level driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION);
struct workqueue_struct *mlx4_wq;
#ifdef CONFIG_MLX4_DEBUG
int mlx4_debug_level = 0;
module_param_named(debug_level, mlx4_debug_level, int, 0644);
MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0");
#endif /* CONFIG_MLX4_DEBUG */
#ifdef CONFIG_PCI_MSI
static int msi_x = 1;
module_param(msi_x, int, 0444);
MODULE_PARM_DESC(msi_x, "attempt to use MSI-X if nonzero");
#else /* CONFIG_PCI_MSI */
#define msi_x (0)
#endif /* CONFIG_PCI_MSI */
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
static int num_vfs;
module_param(num_vfs, int, 0444);
MODULE_PARM_DESC(num_vfs, "enable #num_vfs functions if num_vfs > 0");
static int probe_vf;
module_param(probe_vf, int, 0644);
MODULE_PARM_DESC(probe_vf, "number of vfs to probe by pf driver (num_vfs > 0)");
int mlx4_log_num_mgm_entry_size = 10;
module_param_named(log_num_mgm_entry_size,
mlx4_log_num_mgm_entry_size, int, 0444);
MODULE_PARM_DESC(log_num_mgm_entry_size, "log mgm size, that defines the num"
" of qp per mcg, for example:"
" 10 gives 248.range: 9<="
" log_num_mgm_entry_size <= 12."
" Not in use with device managed"
" flow steering");
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
#define MLX4_VF (1 << 0)
#define HCA_GLOBAL_CAP_MASK 0
#define PF_CONTEXT_BEHAVIOUR_MASK 0
static char mlx4_version[] __devinitdata =
DRV_NAME ": Mellanox ConnectX core driver v"
DRV_VERSION " (" DRV_RELDATE ")\n";
static struct mlx4_profile default_profile = {
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
.num_qp = 1 << 18,
.num_srq = 1 << 16,
.rdmarc_per_qp = 1 << 4,
.num_cq = 1 << 16,
.num_mcg = 1 << 13,
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
.num_mpt = 1 << 19,
.num_mtt = 1 << 20, /* It is really num mtt segements */
};
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
static int log_num_mac = 7;
module_param_named(log_num_mac, log_num_mac, int, 0444);
MODULE_PARM_DESC(log_num_mac, "Log2 max number of MACs per ETH port (1-7)");
static int log_num_vlan;
module_param_named(log_num_vlan, log_num_vlan, int, 0444);
MODULE_PARM_DESC(log_num_vlan, "Log2 max number of VLANs per ETH port (0-7)");
/* Log2 max number of VLANs per ETH port (0-7) */
#define MLX4_LOG_NUM_VLANS 7
static bool use_prio;
module_param_named(use_prio, use_prio, bool, 0444);
MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports "
"(0/1, default 0)");
int log_mtts_per_seg = ilog2(MLX4_MTT_ENTRY_PER_SEG);
module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444);
MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-7)");
static int port_type_array[2] = {MLX4_PORT_TYPE_NONE, MLX4_PORT_TYPE_NONE};
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
static int arr_argc = 2;
module_param_array(port_type_array, int, &arr_argc, 0444);
MODULE_PARM_DESC(port_type_array, "Array of port types: HW_DEFAULT (0) is default "
"1 for IB, 2 for Ethernet");
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
struct mlx4_port_config {
struct list_head list;
enum mlx4_port_type port_type[MLX4_MAX_PORTS + 1];
struct pci_dev *pdev;
};
int mlx4_check_port_params(struct mlx4_dev *dev,
enum mlx4_port_type *port_type)
{
int i;
for (i = 0; i < dev->caps.num_ports - 1; i++) {
if (port_type[i] != port_type[i + 1]) {
if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) {
mlx4_err(dev, "Only same port types supported "
"on this HCA, aborting.\n");
return -EINVAL;
}
}
}
for (i = 0; i < dev->caps.num_ports; i++) {
if (!(port_type[i] & dev->caps.supported_type[i+1])) {
mlx4_err(dev, "Requested port type for port %d is not "
"supported on this HCA\n", i + 1);
return -EINVAL;
}
}
return 0;
}
static void mlx4_set_port_mask(struct mlx4_dev *dev)
{
int i;
for (i = 1; i <= dev->caps.num_ports; ++i)
dev->caps.port_mask[i] = dev->caps.port_type[i];
}
static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
{
int err;
int i;
err = mlx4_QUERY_DEV_CAP(dev, dev_cap);
if (err) {
mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");
return err;
}
if (dev_cap->min_page_sz > PAGE_SIZE) {
mlx4_err(dev, "HCA minimum page size of %d bigger than "
"kernel PAGE_SIZE of %ld, aborting.\n",
dev_cap->min_page_sz, PAGE_SIZE);
return -ENODEV;
}
if (dev_cap->num_ports > MLX4_MAX_PORTS) {
mlx4_err(dev, "HCA has %d ports, but we only support %d, "
"aborting.\n",
dev_cap->num_ports, MLX4_MAX_PORTS);
return -ENODEV;
}
if (dev_cap->uar_size > pci_resource_len(dev->pdev, 2)) {
mlx4_err(dev, "HCA reported UAR size of 0x%x bigger than "
"PCI resource 2 size of 0x%llx, aborting.\n",
dev_cap->uar_size,
(unsigned long long) pci_resource_len(dev->pdev, 2));
return -ENODEV;
}
dev->caps.num_ports = dev_cap->num_ports;
dev->phys_caps.num_phys_eqs = MLX4_MAX_EQ_NUM;
for (i = 1; i <= dev->caps.num_ports; ++i) {
dev->caps.vl_cap[i] = dev_cap->max_vl[i];
dev->caps.ib_mtu_cap[i] = dev_cap->ib_mtu[i];
dev->phys_caps.gid_phys_table_len[i] = dev_cap->max_gids[i];
dev->phys_caps.pkey_phys_table_len[i] = dev_cap->max_pkeys[i];
/* set gid and pkey table operating lengths by default
* to non-sriov values */
dev->caps.gid_table_len[i] = dev_cap->max_gids[i];
dev->caps.pkey_table_len[i] = dev_cap->max_pkeys[i];
dev->caps.port_width_cap[i] = dev_cap->max_port_width[i];
dev->caps.eth_mtu_cap[i] = dev_cap->eth_mtu[i];
dev->caps.def_mac[i] = dev_cap->def_mac[i];
dev->caps.supported_type[i] = dev_cap->supported_port_types[i];
dev->caps.suggested_type[i] = dev_cap->suggested_type[i];
dev->caps.default_sense[i] = dev_cap->default_sense[i];
dev->caps.trans_type[i] = dev_cap->trans_type[i];
dev->caps.vendor_oui[i] = dev_cap->vendor_oui[i];
dev->caps.wavelength[i] = dev_cap->wavelength[i];
dev->caps.trans_code[i] = dev_cap->trans_code[i];
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
dev->caps.uar_page_size = PAGE_SIZE;
dev->caps.num_uars = dev_cap->uar_size / PAGE_SIZE;
dev->caps.local_ca_ack_delay = dev_cap->local_ca_ack_delay;
dev->caps.bf_reg_size = dev_cap->bf_reg_size;
dev->caps.bf_regs_per_page = dev_cap->bf_regs_per_page;
dev->caps.max_sq_sg = dev_cap->max_sq_sg;
dev->caps.max_rq_sg = dev_cap->max_rq_sg;
dev->caps.max_wqes = dev_cap->max_qp_sz;
dev->caps.max_qp_init_rdma = dev_cap->max_requester_per_qp;
dev->caps.max_srq_wqes = dev_cap->max_srq_sz;
dev->caps.max_srq_sge = dev_cap->max_rq_sg - 1;
dev->caps.reserved_srqs = dev_cap->reserved_srqs;
dev->caps.max_sq_desc_sz = dev_cap->max_sq_desc_sz;
dev->caps.max_rq_desc_sz = dev_cap->max_rq_desc_sz;
/*
* Subtract 1 from the limit because we need to allocate a
* spare CQE so the HCA HW can tell the difference between an
* empty CQ and a full CQ.
*/
dev->caps.max_cqes = dev_cap->max_cq_sz - 1;
dev->caps.reserved_cqs = dev_cap->reserved_cqs;
dev->caps.reserved_eqs = dev_cap->reserved_eqs;
dev->caps.reserved_mtts = dev_cap->reserved_mtts;
dev->caps.reserved_mrws = dev_cap->reserved_mrws;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
/* The first 128 UARs are used for EQ doorbells */
dev->caps.reserved_uars = max_t(int, 128, dev_cap->reserved_uars);
dev->caps.reserved_pds = dev_cap->reserved_pds;
dev->caps.reserved_xrcds = (dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC) ?
dev_cap->reserved_xrcds : 0;
dev->caps.max_xrcds = (dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC) ?
dev_cap->max_xrcds : 0;
dev->caps.mtt_entry_sz = dev_cap->mtt_entry_sz;
dev->caps.max_msg_sz = dev_cap->max_msg_sz;
dev->caps.page_size_cap = ~(u32) (dev_cap->min_page_sz - 1);
dev->caps.flags = dev_cap->flags;
dev->caps.flags2 = dev_cap->flags2;
dev->caps.bmme_flags = dev_cap->bmme_flags;
dev->caps.reserved_lkey = dev_cap->reserved_lkey;
dev->caps.stat_rate_support = dev_cap->stat_rate_support;
dev->caps.max_gso_sz = dev_cap->max_gso_sz;
dev->caps.max_rss_tbl_sz = dev_cap->max_rss_tbl_sz;
if (dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_FS_EN) {
dev->caps.steering_mode = MLX4_STEERING_MODE_DEVICE_MANAGED;
dev->caps.num_qp_per_mgm = dev_cap->fs_max_num_qp_per_entry;
dev->caps.fs_log_max_ucast_qp_range_size =
dev_cap->fs_log_max_ucast_qp_range_size;
} else {
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_UC_STEER &&
dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_MC_STEER) {
dev->caps.steering_mode = MLX4_STEERING_MODE_B0;
} else {
dev->caps.steering_mode = MLX4_STEERING_MODE_A0;
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_UC_STEER ||
dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_MC_STEER)
mlx4_warn(dev, "Must have UC_STEER and MC_STEER flags "
"set to use B0 steering. Falling back to A0 steering mode.\n");
}
dev->caps.num_qp_per_mgm = mlx4_get_qp_per_mgm(dev);
}
mlx4_dbg(dev, "Steering mode is: %s\n",
mlx4_steering_mode_str(dev->caps.steering_mode));
/* Sense port always allowed on supported devices for ConnectX1 and 2 */
if (dev->pdev->device != 0x1003)
dev->caps.flags |= MLX4_DEV_CAP_FLAG_SENSE_SUPPORT;
dev->caps.log_num_macs = log_num_mac;
dev->caps.log_num_vlans = MLX4_LOG_NUM_VLANS;
dev->caps.log_num_prios = use_prio ? 3 : 0;
for (i = 1; i <= dev->caps.num_ports; ++i) {
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
dev->caps.port_type[i] = MLX4_PORT_TYPE_NONE;
if (dev->caps.supported_type[i]) {
/* if only ETH is supported - assign ETH */
if (dev->caps.supported_type[i] == MLX4_PORT_TYPE_ETH)
dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH;
/* if only IB is supported, assign IB */
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
else if (dev->caps.supported_type[i] ==
MLX4_PORT_TYPE_IB)
dev->caps.port_type[i] = MLX4_PORT_TYPE_IB;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
else {
/* if IB and ETH are supported, we set the port
* type according to user selection of port type;
* if user selected none, take the FW hint */
if (port_type_array[i - 1] == MLX4_PORT_TYPE_NONE)
dev->caps.port_type[i] = dev->caps.suggested_type[i] ?
MLX4_PORT_TYPE_ETH : MLX4_PORT_TYPE_IB;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
else
dev->caps.port_type[i] = port_type_array[i - 1];
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
}
}
/*
* Link sensing is allowed on the port if 3 conditions are true:
* 1. Both protocols are supported on the port.
* 2. Different types are supported on the port
* 3. FW declared that it supports link sensing
*/
mlx4_priv(dev)->sense.sense_allowed[i] =
((dev->caps.supported_type[i] == MLX4_PORT_TYPE_AUTO) &&
(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP) &&
(dev->caps.flags & MLX4_DEV_CAP_FLAG_SENSE_SUPPORT));
/*
* If "default_sense" bit is set, we move the port to "AUTO" mode
* and perform sense_port FW command to try and set the correct
* port type from beginning
*/
if (mlx4_priv(dev)->sense.sense_allowed[i] && dev->caps.default_sense[i]) {
enum mlx4_port_type sensed_port = MLX4_PORT_TYPE_NONE;
dev->caps.possible_type[i] = MLX4_PORT_TYPE_AUTO;
mlx4_SENSE_PORT(dev, i, &sensed_port);
if (sensed_port != MLX4_PORT_TYPE_NONE)
dev->caps.port_type[i] = sensed_port;
} else {
dev->caps.possible_type[i] = dev->caps.port_type[i];
}
if (dev->caps.log_num_macs > dev_cap->log_max_macs[i]) {
dev->caps.log_num_macs = dev_cap->log_max_macs[i];
mlx4_warn(dev, "Requested number of MACs is too much "
"for port %d, reducing to %d.\n",
i, 1 << dev->caps.log_num_macs);
}
if (dev->caps.log_num_vlans > dev_cap->log_max_vlans[i]) {
dev->caps.log_num_vlans = dev_cap->log_max_vlans[i];
mlx4_warn(dev, "Requested number of VLANs is too much "
"for port %d, reducing to %d.\n",
i, 1 << dev->caps.log_num_vlans);
}
}
dev->caps.max_counters = 1 << ilog2(dev_cap->max_counters);
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] = dev_cap->reserved_qps;
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] =
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] =
(1 << dev->caps.log_num_macs) *
(1 << dev->caps.log_num_vlans) *
(1 << dev->caps.log_num_prios) *
dev->caps.num_ports;
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH] = MLX4_NUM_FEXCH;
dev->caps.reserved_qps = dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] +
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] +
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] +
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH];
dev->caps.sqp_demux = (mlx4_is_master(dev)) ? MLX4_MAX_NUM_SLAVES : 0;
return 0;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
/*The function checks if there are live vf, return the num of them*/
static int mlx4_how_many_lives_vf(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_slave_state *s_state;
int i;
int ret = 0;
for (i = 1/*the ppf is 0*/; i < dev->num_slaves; ++i) {
s_state = &priv->mfunc.master.slave_state[i];
if (s_state->active && s_state->last_cmd !=
MLX4_COMM_CMD_RESET) {
mlx4_warn(dev, "%s: slave: %d is still active\n",
__func__, i);
ret++;
}
}
return ret;
}
mlx4_core: Implement mechanism for reserved Q_Keys The SR-IOV special QP tunneling mechanism uses proxy special QPs (instead of the real special QPs) for MADs on guests. These proxy QPs send their packets to a "tunnel" QP owned by the master. The master then forwards the MAD (after any required paravirtualization) to the real special QP, which sends out the MAD. For security reasons (i.e., to prevent guests from sending MADs to tunnel QPs belonging to other guests), each proxy-tunnel QP pair is assigned a unique, reserved, Q_Key. These Q_Keys are available only for proxy and tunnel QPs -- if the guest tries to use these Q_Keys with other QPs, it will fail. This patch introduces a mechanism for reserving a block of 64K Q_Keys for proxy/tunneling use. The patch introduces also two new fields into mlx4_dev: base_sqpn and base_tunnel_sqpn. In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps are added to the reserved QPN area (so that they will not change). There are 8 special QPs per port in the HCA, and each of them is assigned both a proxy and a tunnel QP, for each VF and for the PF as well in SR-IOV mode. The QPNs for these QPs are arranged as follows: 1. The real SQP numbers (8) 2. The proxy SQPs (8 * (max number of VFs + max number of PFs) 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs) To support these QPs, two new fields are added to struct mlx4_dev: base_sqp: this is the QP number of the first of the real SQPs base_tunnel_sqp: this is the qp number of the first qp in the tunnel sqp region. (On guests, this is the first tunnel sqp of the 8 which are assigned to that guest). In addition, in SR-IOV mode, sqp_start is the number of the first proxy SQP in the proxy SQP region. (In guests, this is the first proxy SQP of the 8 which are assigned to that guest) Note that in non-SR-IOV mode, there are no proxies and no tunnels. In this case, sqp_start is set to sqp_base -- which minimizes code changes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 15:21:42 +07:00
int mlx4_get_parav_qkey(struct mlx4_dev *dev, u32 qpn, u32 *qkey)
{
u32 qk = MLX4_RESERVED_QKEY_BASE;
if (qpn >= dev->phys_caps.base_tunnel_sqpn + 8 * MLX4_MFUNC_MAX ||
qpn < dev->phys_caps.base_proxy_sqpn)
mlx4_core: Implement mechanism for reserved Q_Keys The SR-IOV special QP tunneling mechanism uses proxy special QPs (instead of the real special QPs) for MADs on guests. These proxy QPs send their packets to a "tunnel" QP owned by the master. The master then forwards the MAD (after any required paravirtualization) to the real special QP, which sends out the MAD. For security reasons (i.e., to prevent guests from sending MADs to tunnel QPs belonging to other guests), each proxy-tunnel QP pair is assigned a unique, reserved, Q_Key. These Q_Keys are available only for proxy and tunnel QPs -- if the guest tries to use these Q_Keys with other QPs, it will fail. This patch introduces a mechanism for reserving a block of 64K Q_Keys for proxy/tunneling use. The patch introduces also two new fields into mlx4_dev: base_sqpn and base_tunnel_sqpn. In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps are added to the reserved QPN area (so that they will not change). There are 8 special QPs per port in the HCA, and each of them is assigned both a proxy and a tunnel QP, for each VF and for the PF as well in SR-IOV mode. The QPNs for these QPs are arranged as follows: 1. The real SQP numbers (8) 2. The proxy SQPs (8 * (max number of VFs + max number of PFs) 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs) To support these QPs, two new fields are added to struct mlx4_dev: base_sqp: this is the QP number of the first of the real SQPs base_tunnel_sqp: this is the qp number of the first qp in the tunnel sqp region. (On guests, this is the first tunnel sqp of the 8 which are assigned to that guest). In addition, in SR-IOV mode, sqp_start is the number of the first proxy SQP in the proxy SQP region. (In guests, this is the first proxy SQP of the 8 which are assigned to that guest) Note that in non-SR-IOV mode, there are no proxies and no tunnels. In this case, sqp_start is set to sqp_base -- which minimizes code changes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 15:21:42 +07:00
return -EINVAL;
if (qpn >= dev->phys_caps.base_tunnel_sqpn)
mlx4_core: Implement mechanism for reserved Q_Keys The SR-IOV special QP tunneling mechanism uses proxy special QPs (instead of the real special QPs) for MADs on guests. These proxy QPs send their packets to a "tunnel" QP owned by the master. The master then forwards the MAD (after any required paravirtualization) to the real special QP, which sends out the MAD. For security reasons (i.e., to prevent guests from sending MADs to tunnel QPs belonging to other guests), each proxy-tunnel QP pair is assigned a unique, reserved, Q_Key. These Q_Keys are available only for proxy and tunnel QPs -- if the guest tries to use these Q_Keys with other QPs, it will fail. This patch introduces a mechanism for reserving a block of 64K Q_Keys for proxy/tunneling use. The patch introduces also two new fields into mlx4_dev: base_sqpn and base_tunnel_sqpn. In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps are added to the reserved QPN area (so that they will not change). There are 8 special QPs per port in the HCA, and each of them is assigned both a proxy and a tunnel QP, for each VF and for the PF as well in SR-IOV mode. The QPNs for these QPs are arranged as follows: 1. The real SQP numbers (8) 2. The proxy SQPs (8 * (max number of VFs + max number of PFs) 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs) To support these QPs, two new fields are added to struct mlx4_dev: base_sqp: this is the QP number of the first of the real SQPs base_tunnel_sqp: this is the qp number of the first qp in the tunnel sqp region. (On guests, this is the first tunnel sqp of the 8 which are assigned to that guest). In addition, in SR-IOV mode, sqp_start is the number of the first proxy SQP in the proxy SQP region. (In guests, this is the first proxy SQP of the 8 which are assigned to that guest) Note that in non-SR-IOV mode, there are no proxies and no tunnels. In this case, sqp_start is set to sqp_base -- which minimizes code changes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 15:21:42 +07:00
/* tunnel qp */
qk += qpn - dev->phys_caps.base_tunnel_sqpn;
mlx4_core: Implement mechanism for reserved Q_Keys The SR-IOV special QP tunneling mechanism uses proxy special QPs (instead of the real special QPs) for MADs on guests. These proxy QPs send their packets to a "tunnel" QP owned by the master. The master then forwards the MAD (after any required paravirtualization) to the real special QP, which sends out the MAD. For security reasons (i.e., to prevent guests from sending MADs to tunnel QPs belonging to other guests), each proxy-tunnel QP pair is assigned a unique, reserved, Q_Key. These Q_Keys are available only for proxy and tunnel QPs -- if the guest tries to use these Q_Keys with other QPs, it will fail. This patch introduces a mechanism for reserving a block of 64K Q_Keys for proxy/tunneling use. The patch introduces also two new fields into mlx4_dev: base_sqpn and base_tunnel_sqpn. In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps are added to the reserved QPN area (so that they will not change). There are 8 special QPs per port in the HCA, and each of them is assigned both a proxy and a tunnel QP, for each VF and for the PF as well in SR-IOV mode. The QPNs for these QPs are arranged as follows: 1. The real SQP numbers (8) 2. The proxy SQPs (8 * (max number of VFs + max number of PFs) 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs) To support these QPs, two new fields are added to struct mlx4_dev: base_sqp: this is the QP number of the first of the real SQPs base_tunnel_sqp: this is the qp number of the first qp in the tunnel sqp region. (On guests, this is the first tunnel sqp of the 8 which are assigned to that guest). In addition, in SR-IOV mode, sqp_start is the number of the first proxy SQP in the proxy SQP region. (In guests, this is the first proxy SQP of the 8 which are assigned to that guest) Note that in non-SR-IOV mode, there are no proxies and no tunnels. In this case, sqp_start is set to sqp_base -- which minimizes code changes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 15:21:42 +07:00
else
qk += qpn - dev->phys_caps.base_proxy_sqpn;
mlx4_core: Implement mechanism for reserved Q_Keys The SR-IOV special QP tunneling mechanism uses proxy special QPs (instead of the real special QPs) for MADs on guests. These proxy QPs send their packets to a "tunnel" QP owned by the master. The master then forwards the MAD (after any required paravirtualization) to the real special QP, which sends out the MAD. For security reasons (i.e., to prevent guests from sending MADs to tunnel QPs belonging to other guests), each proxy-tunnel QP pair is assigned a unique, reserved, Q_Key. These Q_Keys are available only for proxy and tunnel QPs -- if the guest tries to use these Q_Keys with other QPs, it will fail. This patch introduces a mechanism for reserving a block of 64K Q_Keys for proxy/tunneling use. The patch introduces also two new fields into mlx4_dev: base_sqpn and base_tunnel_sqpn. In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps are added to the reserved QPN area (so that they will not change). There are 8 special QPs per port in the HCA, and each of them is assigned both a proxy and a tunnel QP, for each VF and for the PF as well in SR-IOV mode. The QPNs for these QPs are arranged as follows: 1. The real SQP numbers (8) 2. The proxy SQPs (8 * (max number of VFs + max number of PFs) 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs) To support these QPs, two new fields are added to struct mlx4_dev: base_sqp: this is the QP number of the first of the real SQPs base_tunnel_sqp: this is the qp number of the first qp in the tunnel sqp region. (On guests, this is the first tunnel sqp of the 8 which are assigned to that guest). In addition, in SR-IOV mode, sqp_start is the number of the first proxy SQP in the proxy SQP region. (In guests, this is the first proxy SQP of the 8 which are assigned to that guest) Note that in non-SR-IOV mode, there are no proxies and no tunnels. In this case, sqp_start is set to sqp_base -- which minimizes code changes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 15:21:42 +07:00
*qkey = qk;
return 0;
}
EXPORT_SYMBOL(mlx4_get_parav_qkey);
void mlx4_sync_pkey_table(struct mlx4_dev *dev, int slave, int port, int i, int val)
{
struct mlx4_priv *priv = container_of(dev, struct mlx4_priv, dev);
if (!mlx4_is_master(dev))
return;
priv->virt2phys_pkey[slave][port - 1][i] = val;
}
EXPORT_SYMBOL(mlx4_sync_pkey_table);
void mlx4_put_slave_node_guid(struct mlx4_dev *dev, int slave, __be64 guid)
{
struct mlx4_priv *priv = container_of(dev, struct mlx4_priv, dev);
if (!mlx4_is_master(dev))
return;
priv->slave_node_guids[slave] = guid;
}
EXPORT_SYMBOL(mlx4_put_slave_node_guid);
__be64 mlx4_get_slave_node_guid(struct mlx4_dev *dev, int slave)
{
struct mlx4_priv *priv = container_of(dev, struct mlx4_priv, dev);
if (!mlx4_is_master(dev))
return 0;
return priv->slave_node_guids[slave];
}
EXPORT_SYMBOL(mlx4_get_slave_node_guid);
int mlx4_is_slave_active(struct mlx4_dev *dev, int slave)
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_slave_state *s_slave;
if (!mlx4_is_master(dev))
return 0;
s_slave = &priv->mfunc.master.slave_state[slave];
return !!s_slave->active;
}
EXPORT_SYMBOL(mlx4_is_slave_active);
static int mlx4_slave_cap(struct mlx4_dev *dev)
{
int err;
u32 page_size;
struct mlx4_dev_cap dev_cap;
struct mlx4_func_cap func_cap;
struct mlx4_init_hca_param hca_param;
int i;
memset(&hca_param, 0, sizeof(hca_param));
err = mlx4_QUERY_HCA(dev, &hca_param);
if (err) {
mlx4_err(dev, "QUERY_HCA command failed, aborting.\n");
return err;
}
/*fail if the hca has an unknown capability */
if ((hca_param.global_caps | HCA_GLOBAL_CAP_MASK) !=
HCA_GLOBAL_CAP_MASK) {
mlx4_err(dev, "Unknown hca global capabilities\n");
return -ENOSYS;
}
mlx4_log_num_mgm_entry_size = hca_param.log_mc_entry_sz;
memset(&dev_cap, 0, sizeof(dev_cap));
dev->caps.max_qp_dest_rdma = 1 << hca_param.log_rd_per_qp;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err = mlx4_dev_cap(dev, &dev_cap);
if (err) {
mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");
return err;
}
err = mlx4_QUERY_FW(dev);
if (err)
mlx4_err(dev, "QUERY_FW command failed: could not get FW version.\n");
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
page_size = ~dev->caps.page_size_cap + 1;
mlx4_warn(dev, "HCA minimum page size:%d\n", page_size);
if (page_size > PAGE_SIZE) {
mlx4_err(dev, "HCA minimum page size of %d bigger than "
"kernel PAGE_SIZE of %ld, aborting.\n",
page_size, PAGE_SIZE);
return -ENODEV;
}
/* slave gets uar page size from QUERY_HCA fw command */
dev->caps.uar_page_size = 1 << (hca_param.uar_page_sz + 12);
/* TODO: relax this assumption */
if (dev->caps.uar_page_size != PAGE_SIZE) {
mlx4_err(dev, "UAR size:%d != kernel PAGE_SIZE of %ld\n",
dev->caps.uar_page_size, PAGE_SIZE);
return -ENODEV;
}
memset(&func_cap, 0, sizeof(func_cap));
err = mlx4_QUERY_FUNC_CAP(dev, 0, &func_cap);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (err) {
mlx4_err(dev, "QUERY_FUNC_CAP general command failed, aborting (%d).\n",
err);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
return err;
}
if ((func_cap.pf_context_behaviour | PF_CONTEXT_BEHAVIOUR_MASK) !=
PF_CONTEXT_BEHAVIOUR_MASK) {
mlx4_err(dev, "Unknown pf context behaviour\n");
return -ENOSYS;
}
dev->caps.num_ports = func_cap.num_ports;
dev->caps.num_qps = func_cap.qp_quota;
dev->caps.num_srqs = func_cap.srq_quota;
dev->caps.num_cqs = func_cap.cq_quota;
dev->caps.num_eqs = func_cap.max_eq;
dev->caps.reserved_eqs = func_cap.reserved_eq;
dev->caps.num_mpts = func_cap.mpt_quota;
dev->caps.num_mtts = func_cap.mtt_quota;
dev->caps.num_pds = MLX4_NUM_PDS;
dev->caps.num_mgms = 0;
dev->caps.num_amgms = 0;
if (dev->caps.num_ports > MLX4_MAX_PORTS) {
mlx4_err(dev, "HCA has %d ports, but we only support %d, "
"aborting.\n", dev->caps.num_ports, MLX4_MAX_PORTS);
return -ENODEV;
}
dev->caps.qp0_tunnel = kcalloc(dev->caps.num_ports, sizeof (u32), GFP_KERNEL);
dev->caps.qp0_proxy = kcalloc(dev->caps.num_ports, sizeof (u32), GFP_KERNEL);
dev->caps.qp1_tunnel = kcalloc(dev->caps.num_ports, sizeof (u32), GFP_KERNEL);
dev->caps.qp1_proxy = kcalloc(dev->caps.num_ports, sizeof (u32), GFP_KERNEL);
if (!dev->caps.qp0_tunnel || !dev->caps.qp0_proxy ||
!dev->caps.qp1_tunnel || !dev->caps.qp1_proxy) {
err = -ENOMEM;
goto err_mem;
}
for (i = 1; i <= dev->caps.num_ports; ++i) {
err = mlx4_QUERY_FUNC_CAP(dev, (u32) i, &func_cap);
if (err) {
mlx4_err(dev, "QUERY_FUNC_CAP port command failed for"
" port %d, aborting (%d).\n", i, err);
goto err_mem;
}
dev->caps.qp0_tunnel[i - 1] = func_cap.qp0_tunnel_qpn;
dev->caps.qp0_proxy[i - 1] = func_cap.qp0_proxy_qpn;
dev->caps.qp1_tunnel[i - 1] = func_cap.qp1_tunnel_qpn;
dev->caps.qp1_proxy[i - 1] = func_cap.qp1_proxy_qpn;
dev->caps.port_mask[i] = dev->caps.port_type[i];
if (mlx4_get_slave_pkey_gid_tbl_len(dev, i,
&dev->caps.gid_table_len[i],
&dev->caps.pkey_table_len[i]))
goto err_mem;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (dev->caps.uar_page_size * (dev->caps.num_uars -
dev->caps.reserved_uars) >
pci_resource_len(dev->pdev, 2)) {
mlx4_err(dev, "HCA reported UAR region size of 0x%x bigger than "
"PCI resource 2 size of 0x%llx, aborting.\n",
dev->caps.uar_page_size * dev->caps.num_uars,
(unsigned long long) pci_resource_len(dev->pdev, 2));
goto err_mem;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
}
return 0;
err_mem:
kfree(dev->caps.qp0_tunnel);
kfree(dev->caps.qp0_proxy);
kfree(dev->caps.qp1_tunnel);
kfree(dev->caps.qp1_proxy);
dev->caps.qp0_tunnel = dev->caps.qp0_proxy =
dev->caps.qp1_tunnel = dev->caps.qp1_proxy = NULL;
return err;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
}
/*
* Change the port configuration of the device.
* Every user of this function must hold the port mutex.
*/
int mlx4_change_port_types(struct mlx4_dev *dev,
enum mlx4_port_type *port_types)
{
int err = 0;
int change = 0;
int port;
for (port = 0; port < dev->caps.num_ports; port++) {
/* Change the port type only if the new type is different
* from the current, and not set to Auto */
if (port_types[port] != dev->caps.port_type[port + 1])
change = 1;
}
if (change) {
mlx4_unregister_device(dev);
for (port = 1; port <= dev->caps.num_ports; port++) {
mlx4_CLOSE_PORT(dev, port);
dev->caps.port_type[port] = port_types[port - 1];
err = mlx4_SET_PORT(dev, port, -1);
if (err) {
mlx4_err(dev, "Failed to set port %d, "
"aborting\n", port);
goto out;
}
}
mlx4_set_port_mask(dev);
err = mlx4_register_device(dev);
}
out:
return err;
}
static ssize_t show_port_type(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
port_attr);
struct mlx4_dev *mdev = info->dev;
char type[8];
sprintf(type, "%s",
(mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB) ?
"ib" : "eth");
if (mdev->caps.possible_type[info->port] == MLX4_PORT_TYPE_AUTO)
sprintf(buf, "auto (%s)\n", type);
else
sprintf(buf, "%s\n", type);
return strlen(buf);
}
static ssize_t set_port_type(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
port_attr);
struct mlx4_dev *mdev = info->dev;
struct mlx4_priv *priv = mlx4_priv(mdev);
enum mlx4_port_type types[MLX4_MAX_PORTS];
enum mlx4_port_type new_types[MLX4_MAX_PORTS];
int i;
int err = 0;
if (!strcmp(buf, "ib\n"))
info->tmp_type = MLX4_PORT_TYPE_IB;
else if (!strcmp(buf, "eth\n"))
info->tmp_type = MLX4_PORT_TYPE_ETH;
else if (!strcmp(buf, "auto\n"))
info->tmp_type = MLX4_PORT_TYPE_AUTO;
else {
mlx4_err(mdev, "%s is not supported port type\n", buf);
return -EINVAL;
}
mlx4_stop_sense(mdev);
mutex_lock(&priv->port_mutex);
/* Possible type is always the one that was delivered */
mdev->caps.possible_type[info->port] = info->tmp_type;
for (i = 0; i < mdev->caps.num_ports; i++) {
types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type :
mdev->caps.possible_type[i+1];
if (types[i] == MLX4_PORT_TYPE_AUTO)
types[i] = mdev->caps.port_type[i+1];
}
if (!(mdev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP) &&
!(mdev->caps.flags & MLX4_DEV_CAP_FLAG_SENSE_SUPPORT)) {
for (i = 1; i <= mdev->caps.num_ports; i++) {
if (mdev->caps.possible_type[i] == MLX4_PORT_TYPE_AUTO) {
mdev->caps.possible_type[i] = mdev->caps.port_type[i];
err = -EINVAL;
}
}
}
if (err) {
mlx4_err(mdev, "Auto sensing is not supported on this HCA. "
"Set only 'eth' or 'ib' for both ports "
"(should be the same)\n");
goto out;
}
mlx4_do_sense_ports(mdev, new_types, types);
err = mlx4_check_port_params(mdev, new_types);
if (err)
goto out;
/* We are about to apply the changes after the configuration
* was verified, no need to remember the temporary types
* any more */
for (i = 0; i < mdev->caps.num_ports; i++)
priv->port[i + 1].tmp_type = 0;
err = mlx4_change_port_types(mdev, new_types);
out:
mlx4_start_sense(mdev);
mutex_unlock(&priv->port_mutex);
return err ? err : count;
}
enum ibta_mtu {
IB_MTU_256 = 1,
IB_MTU_512 = 2,
IB_MTU_1024 = 3,
IB_MTU_2048 = 4,
IB_MTU_4096 = 5
};
static inline int int_to_ibta_mtu(int mtu)
{
switch (mtu) {
case 256: return IB_MTU_256;
case 512: return IB_MTU_512;
case 1024: return IB_MTU_1024;
case 2048: return IB_MTU_2048;
case 4096: return IB_MTU_4096;
default: return -1;
}
}
static inline int ibta_mtu_to_int(enum ibta_mtu mtu)
{
switch (mtu) {
case IB_MTU_256: return 256;
case IB_MTU_512: return 512;
case IB_MTU_1024: return 1024;
case IB_MTU_2048: return 2048;
case IB_MTU_4096: return 4096;
default: return -1;
}
}
static ssize_t show_port_ib_mtu(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
port_mtu_attr);
struct mlx4_dev *mdev = info->dev;
if (mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_ETH)
mlx4_warn(mdev, "port level mtu is only used for IB ports\n");
sprintf(buf, "%d\n",
ibta_mtu_to_int(mdev->caps.port_ib_mtu[info->port]));
return strlen(buf);
}
static ssize_t set_port_ib_mtu(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
port_mtu_attr);
struct mlx4_dev *mdev = info->dev;
struct mlx4_priv *priv = mlx4_priv(mdev);
int err, port, mtu, ibta_mtu = -1;
if (mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_ETH) {
mlx4_warn(mdev, "port level mtu is only used for IB ports\n");
return -EINVAL;
}
err = sscanf(buf, "%d", &mtu);
if (err > 0)
ibta_mtu = int_to_ibta_mtu(mtu);
if (err <= 0 || ibta_mtu < 0) {
mlx4_err(mdev, "%s is invalid IBTA mtu\n", buf);
return -EINVAL;
}
mdev->caps.port_ib_mtu[info->port] = ibta_mtu;
mlx4_stop_sense(mdev);
mutex_lock(&priv->port_mutex);
mlx4_unregister_device(mdev);
for (port = 1; port <= mdev->caps.num_ports; port++) {
mlx4_CLOSE_PORT(mdev, port);
err = mlx4_SET_PORT(mdev, port, -1);
if (err) {
mlx4_err(mdev, "Failed to set port %d, "
"aborting\n", port);
goto err_set_port;
}
}
err = mlx4_register_device(mdev);
err_set_port:
mutex_unlock(&priv->port_mutex);
mlx4_start_sense(mdev);
return err ? err : count;
}
static int mlx4_load_fw(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
priv->fw.fw_icm = mlx4_alloc_icm(dev, priv->fw.fw_pages,
GFP_HIGHUSER | __GFP_NOWARN, 0);
if (!priv->fw.fw_icm) {
mlx4_err(dev, "Couldn't allocate FW area, aborting.\n");
return -ENOMEM;
}
err = mlx4_MAP_FA(dev, priv->fw.fw_icm);
if (err) {
mlx4_err(dev, "MAP_FA command failed, aborting.\n");
goto err_free;
}
err = mlx4_RUN_FW(dev);
if (err) {
mlx4_err(dev, "RUN_FW command failed, aborting.\n");
goto err_unmap_fa;
}
return 0;
err_unmap_fa:
mlx4_UNMAP_FA(dev);
err_free:
mlx4_free_icm(dev, priv->fw.fw_icm, 0);
return err;
}
static int mlx4_init_cmpt_table(struct mlx4_dev *dev, u64 cmpt_base,
int cmpt_entry_sz)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
int num_eqs;
err = mlx4_init_icm_table(dev, &priv->qp_table.cmpt_table,
cmpt_base +
((u64) (MLX4_CMPT_TYPE_QP *
cmpt_entry_sz) << MLX4_CMPT_SHIFT),
cmpt_entry_sz, dev->caps.num_qps,
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
if (err)
goto err;
err = mlx4_init_icm_table(dev, &priv->srq_table.cmpt_table,
cmpt_base +
((u64) (MLX4_CMPT_TYPE_SRQ *
cmpt_entry_sz) << MLX4_CMPT_SHIFT),
cmpt_entry_sz, dev->caps.num_srqs,
dev->caps.reserved_srqs, 0, 0);
if (err)
goto err_qp;
err = mlx4_init_icm_table(dev, &priv->cq_table.cmpt_table,
cmpt_base +
((u64) (MLX4_CMPT_TYPE_CQ *
cmpt_entry_sz) << MLX4_CMPT_SHIFT),
cmpt_entry_sz, dev->caps.num_cqs,
dev->caps.reserved_cqs, 0, 0);
if (err)
goto err_srq;
num_eqs = (mlx4_is_master(dev)) ? dev->phys_caps.num_phys_eqs :
dev->caps.num_eqs;
err = mlx4_init_icm_table(dev, &priv->eq_table.cmpt_table,
cmpt_base +
((u64) (MLX4_CMPT_TYPE_EQ *
cmpt_entry_sz) << MLX4_CMPT_SHIFT),
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
cmpt_entry_sz, num_eqs, num_eqs, 0, 0);
if (err)
goto err_cq;
return 0;
err_cq:
mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table);
err_srq:
mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table);
err_qp:
mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table);
err:
return err;
}
static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap,
struct mlx4_init_hca_param *init_hca, u64 icm_size)
{
struct mlx4_priv *priv = mlx4_priv(dev);
u64 aux_pages;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
int num_eqs;
int err;
err = mlx4_SET_ICM_SIZE(dev, icm_size, &aux_pages);
if (err) {
mlx4_err(dev, "SET_ICM_SIZE command failed, aborting.\n");
return err;
}
mlx4_dbg(dev, "%lld KB of HCA context requires %lld KB aux memory.\n",
(unsigned long long) icm_size >> 10,
(unsigned long long) aux_pages << 2);
priv->fw.aux_icm = mlx4_alloc_icm(dev, aux_pages,
GFP_HIGHUSER | __GFP_NOWARN, 0);
if (!priv->fw.aux_icm) {
mlx4_err(dev, "Couldn't allocate aux memory, aborting.\n");
return -ENOMEM;
}
err = mlx4_MAP_ICM_AUX(dev, priv->fw.aux_icm);
if (err) {
mlx4_err(dev, "MAP_ICM_AUX command failed, aborting.\n");
goto err_free_aux;
}
err = mlx4_init_cmpt_table(dev, init_hca->cmpt_base, dev_cap->cmpt_entry_sz);
if (err) {
mlx4_err(dev, "Failed to map cMPT context memory, aborting.\n");
goto err_unmap_aux;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
num_eqs = (mlx4_is_master(dev)) ? dev->phys_caps.num_phys_eqs :
dev->caps.num_eqs;
err = mlx4_init_icm_table(dev, &priv->eq_table.table,
init_hca->eqc_base, dev_cap->eqc_entry_sz,
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
num_eqs, num_eqs, 0, 0);
if (err) {
mlx4_err(dev, "Failed to map EQ context memory, aborting.\n");
goto err_unmap_cmpt;
}
/*
* Reserved MTT entries must be aligned up to a cacheline
* boundary, since the FW will write to them, while the driver
* writes to all other MTT entries. (The variable
* dev->caps.mtt_entry_sz below is really the MTT segment
* size, not the raw entry size)
*/
dev->caps.reserved_mtts =
ALIGN(dev->caps.reserved_mtts * dev->caps.mtt_entry_sz,
dma_get_cache_alignment()) / dev->caps.mtt_entry_sz;
err = mlx4_init_icm_table(dev, &priv->mr_table.mtt_table,
init_hca->mtt_base,
dev->caps.mtt_entry_sz,
dev->caps.num_mtts,
dev->caps.reserved_mtts, 1, 0);
if (err) {
mlx4_err(dev, "Failed to map MTT context memory, aborting.\n");
goto err_unmap_eq;
}
err = mlx4_init_icm_table(dev, &priv->mr_table.dmpt_table,
init_hca->dmpt_base,
dev_cap->dmpt_entry_sz,
dev->caps.num_mpts,
dev->caps.reserved_mrws, 1, 1);
if (err) {
mlx4_err(dev, "Failed to map dMPT context memory, aborting.\n");
goto err_unmap_mtt;
}
err = mlx4_init_icm_table(dev, &priv->qp_table.qp_table,
init_hca->qpc_base,
dev_cap->qpc_entry_sz,
dev->caps.num_qps,
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
if (err) {
mlx4_err(dev, "Failed to map QP context memory, aborting.\n");
goto err_unmap_dmpt;
}
err = mlx4_init_icm_table(dev, &priv->qp_table.auxc_table,
init_hca->auxc_base,
dev_cap->aux_entry_sz,
dev->caps.num_qps,
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
if (err) {
mlx4_err(dev, "Failed to map AUXC context memory, aborting.\n");
goto err_unmap_qp;
}
err = mlx4_init_icm_table(dev, &priv->qp_table.altc_table,
init_hca->altc_base,
dev_cap->altc_entry_sz,
dev->caps.num_qps,
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
if (err) {
mlx4_err(dev, "Failed to map ALTC context memory, aborting.\n");
goto err_unmap_auxc;
}
err = mlx4_init_icm_table(dev, &priv->qp_table.rdmarc_table,
init_hca->rdmarc_base,
dev_cap->rdmarc_entry_sz << priv->qp_table.rdmarc_shift,
dev->caps.num_qps,
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
if (err) {
mlx4_err(dev, "Failed to map RDMARC context memory, aborting\n");
goto err_unmap_altc;
}
err = mlx4_init_icm_table(dev, &priv->cq_table.table,
init_hca->cqc_base,
dev_cap->cqc_entry_sz,
dev->caps.num_cqs,
dev->caps.reserved_cqs, 0, 0);
if (err) {
mlx4_err(dev, "Failed to map CQ context memory, aborting.\n");
goto err_unmap_rdmarc;
}
err = mlx4_init_icm_table(dev, &priv->srq_table.table,
init_hca->srqc_base,
dev_cap->srq_entry_sz,
dev->caps.num_srqs,
dev->caps.reserved_srqs, 0, 0);
if (err) {
mlx4_err(dev, "Failed to map SRQ context memory, aborting.\n");
goto err_unmap_cq;
}
/*
* For flow steering device managed mode it is required to use
* mlx4_init_icm_table. For B0 steering mode it's not strictly
* required, but for simplicity just map the whole multicast
* group table now. The table isn't very big and it's a lot
* easier than trying to track ref counts.
*/
err = mlx4_init_icm_table(dev, &priv->mcg_table.table,
init_hca->mc_base,
mlx4_get_mgm_entry_size(dev),
dev->caps.num_mgms + dev->caps.num_amgms,
dev->caps.num_mgms + dev->caps.num_amgms,
0, 0);
if (err) {
mlx4_err(dev, "Failed to map MCG context memory, aborting.\n");
goto err_unmap_srq;
}
return 0;
err_unmap_srq:
mlx4_cleanup_icm_table(dev, &priv->srq_table.table);
err_unmap_cq:
mlx4_cleanup_icm_table(dev, &priv->cq_table.table);
err_unmap_rdmarc:
mlx4_cleanup_icm_table(dev, &priv->qp_table.rdmarc_table);
err_unmap_altc:
mlx4_cleanup_icm_table(dev, &priv->qp_table.altc_table);
err_unmap_auxc:
mlx4_cleanup_icm_table(dev, &priv->qp_table.auxc_table);
err_unmap_qp:
mlx4_cleanup_icm_table(dev, &priv->qp_table.qp_table);
err_unmap_dmpt:
mlx4_cleanup_icm_table(dev, &priv->mr_table.dmpt_table);
err_unmap_mtt:
mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table);
err_unmap_eq:
mlx4_cleanup_icm_table(dev, &priv->eq_table.table);
err_unmap_cmpt:
mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table);
err_unmap_aux:
mlx4_UNMAP_ICM_AUX(dev);
err_free_aux:
mlx4_free_icm(dev, priv->fw.aux_icm, 0);
return err;
}
static void mlx4_free_icms(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
mlx4_cleanup_icm_table(dev, &priv->mcg_table.table);
mlx4_cleanup_icm_table(dev, &priv->srq_table.table);
mlx4_cleanup_icm_table(dev, &priv->cq_table.table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.rdmarc_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.altc_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.auxc_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.qp_table);
mlx4_cleanup_icm_table(dev, &priv->mr_table.dmpt_table);
mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table);
mlx4_cleanup_icm_table(dev, &priv->eq_table.table);
mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table);
mlx4_UNMAP_ICM_AUX(dev);
mlx4_free_icm(dev, priv->fw.aux_icm, 0);
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
static void mlx4_slave_exit(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
down(&priv->cmd.slave_sem);
if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, 0, MLX4_COMM_TIME))
mlx4_warn(dev, "Failed to close slave function.\n");
up(&priv->cmd.slave_sem);
}
static int map_bf_area(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
resource_size_t bf_start;
resource_size_t bf_len;
int err = 0;
if (!dev->caps.bf_reg_size)
return -ENXIO;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
bf_start = pci_resource_start(dev->pdev, 2) +
(dev->caps.num_uars << PAGE_SHIFT);
bf_len = pci_resource_len(dev->pdev, 2) -
(dev->caps.num_uars << PAGE_SHIFT);
priv->bf_mapping = io_mapping_create_wc(bf_start, bf_len);
if (!priv->bf_mapping)
err = -ENOMEM;
return err;
}
static void unmap_bf_area(struct mlx4_dev *dev)
{
if (mlx4_priv(dev)->bf_mapping)
io_mapping_free(mlx4_priv(dev)->bf_mapping);
}
static void mlx4_close_hca(struct mlx4_dev *dev)
{
unmap_bf_area(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (mlx4_is_slave(dev))
mlx4_slave_exit(dev);
else {
mlx4_CLOSE_HCA(dev, 0);
mlx4_free_icms(dev);
mlx4_UNMAP_FA(dev);
mlx4_free_icm(dev, mlx4_priv(dev)->fw.fw_icm, 0);
}
}
static int mlx4_init_slave(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
u64 dma = (u64) priv->mfunc.vhcr_dma;
int num_of_reset_retries = NUM_OF_RESET_RETRIES;
int ret_from_reset = 0;
u32 slave_read;
u32 cmd_channel_ver;
down(&priv->cmd.slave_sem);
priv->cmd.max_cmds = 1;
mlx4_warn(dev, "Sending reset\n");
ret_from_reset = mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, 0,
MLX4_COMM_TIME);
/* if we are in the middle of flr the slave will try
* NUM_OF_RESET_RETRIES times before leaving.*/
if (ret_from_reset) {
if (MLX4_DELAY_RESET_SLAVE == ret_from_reset) {
msleep(SLEEP_TIME_IN_RESET);
while (ret_from_reset && num_of_reset_retries) {
mlx4_warn(dev, "slave is currently in the"
"middle of FLR. retrying..."
"(try num:%d)\n",
(NUM_OF_RESET_RETRIES -
num_of_reset_retries + 1));
ret_from_reset =
mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET,
0, MLX4_COMM_TIME);
num_of_reset_retries = num_of_reset_retries - 1;
}
} else
goto err;
}
/* check the driver version - the slave I/F revision
* must match the master's */
slave_read = swab32(readl(&priv->mfunc.comm->slave_read));
cmd_channel_ver = mlx4_comm_get_version();
if (MLX4_COMM_GET_IF_REV(cmd_channel_ver) !=
MLX4_COMM_GET_IF_REV(slave_read)) {
mlx4_err(dev, "slave driver version is not supported"
" by the master\n");
goto err;
}
mlx4_warn(dev, "Sending vhcr0\n");
if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_VHCR0, dma >> 48,
MLX4_COMM_TIME))
goto err;
if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_VHCR1, dma >> 32,
MLX4_COMM_TIME))
goto err;
if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_VHCR2, dma >> 16,
MLX4_COMM_TIME))
goto err;
if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_VHCR_EN, dma, MLX4_COMM_TIME))
goto err;
up(&priv->cmd.slave_sem);
return 0;
err:
mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, 0, 0);
up(&priv->cmd.slave_sem);
return -EIO;
}
static void mlx4_parav_master_pf_caps(struct mlx4_dev *dev)
{
int i;
for (i = 1; i <= dev->caps.num_ports; i++) {
dev->caps.gid_table_len[i] = 1;
dev->caps.pkey_table_len[i] =
dev->phys_caps.pkey_phys_table_len[i] - 1;
}
}
static int mlx4_init_hca(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_adapter adapter;
struct mlx4_dev_cap dev_cap;
struct mlx4_mod_stat_cfg mlx4_cfg;
struct mlx4_profile profile;
struct mlx4_init_hca_param init_hca;
u64 icm_size;
int err;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (!mlx4_is_slave(dev)) {
err = mlx4_QUERY_FW(dev);
if (err) {
if (err == -EACCES)
mlx4_info(dev, "non-primary physical function, skipping.\n");
else
mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
return err;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err = mlx4_load_fw(dev);
if (err) {
mlx4_err(dev, "Failed to start FW, aborting.\n");
return err;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
mlx4_cfg.log_pg_sz_m = 1;
mlx4_cfg.log_pg_sz = 0;
err = mlx4_MOD_STAT_CFG(dev, &mlx4_cfg);
if (err)
mlx4_warn(dev, "Failed to override log_pg_sz parameter\n");
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err = mlx4_dev_cap(dev, &dev_cap);
if (err) {
mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");
goto err_stop_fw;
}
if (mlx4_is_master(dev))
mlx4_parav_master_pf_caps(dev);
priv->fs_hash_mode = MLX4_FS_L2_HASH;
switch (priv->fs_hash_mode) {
case MLX4_FS_L2_HASH:
init_hca.fs_hash_enable_bits = 0;
break;
case MLX4_FS_L2_L3_L4_HASH:
/* Enable flow steering with
* udp unicast and tcp unicast
*/
init_hca.fs_hash_enable_bits =
MLX4_FS_UDP_UC_EN | MLX4_FS_TCP_UC_EN;
break;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
profile = default_profile;
if (dev->caps.steering_mode ==
MLX4_STEERING_MODE_DEVICE_MANAGED)
profile.num_mcg = MLX4_FS_NUM_MCG;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
icm_size = mlx4_make_profile(dev, &profile, &dev_cap,
&init_hca);
if ((long long) icm_size < 0) {
err = icm_size;
goto err_stop_fw;
}
dev->caps.max_fmr_maps = (1 << (32 - ilog2(dev->caps.num_mpts))) - 1;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
init_hca.log_uar_sz = ilog2(dev->caps.num_uars);
init_hca.uar_page_sz = PAGE_SHIFT - 12;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err = mlx4_init_icm(dev, &dev_cap, &init_hca, icm_size);
if (err)
goto err_stop_fw;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err = mlx4_INIT_HCA(dev, &init_hca);
if (err) {
mlx4_err(dev, "INIT_HCA command failed, aborting.\n");
goto err_free_icm;
}
} else {
err = mlx4_init_slave(dev);
if (err) {
mlx4_err(dev, "Failed to initialize slave\n");
return err;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err = mlx4_slave_cap(dev);
if (err) {
mlx4_err(dev, "Failed to obtain slave caps\n");
goto err_close;
}
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (map_bf_area(dev))
mlx4_dbg(dev, "Failed to map blue flame area\n");
/*Only the master set the ports, all the rest got it from it.*/
if (!mlx4_is_slave(dev))
mlx4_set_port_mask(dev);
err = mlx4_QUERY_ADAPTER(dev, &adapter);
if (err) {
mlx4_err(dev, "QUERY_ADAPTER command failed, aborting.\n");
goto unmap_bf;
}
priv->eq_table.inta_pin = adapter.inta_pin;
memcpy(dev->board_id, adapter.board_id, sizeof dev->board_id);
return 0;
unmap_bf:
unmap_bf_area(dev);
err_close:
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
mlx4_close_hca(dev);
err_free_icm:
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (!mlx4_is_slave(dev))
mlx4_free_icms(dev);
err_stop_fw:
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (!mlx4_is_slave(dev)) {
mlx4_UNMAP_FA(dev);
mlx4_free_icm(dev, priv->fw.fw_icm, 0);
}
return err;
}
static int mlx4_init_counters_table(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int nent;
if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_COUNTERS))
return -ENOENT;
nent = dev->caps.max_counters;
return mlx4_bitmap_init(&priv->counters_bitmap, nent, nent - 1, 0, 0);
}
static void mlx4_cleanup_counters_table(struct mlx4_dev *dev)
{
mlx4_bitmap_cleanup(&mlx4_priv(dev)->counters_bitmap);
}
int __mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx)
{
struct mlx4_priv *priv = mlx4_priv(dev);
if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_COUNTERS))
return -ENOENT;
*idx = mlx4_bitmap_alloc(&priv->counters_bitmap);
if (*idx == -1)
return -ENOMEM;
return 0;
}
int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx)
{
u64 out_param;
int err;
if (mlx4_is_mfunc(dev)) {
err = mlx4_cmd_imm(dev, 0, &out_param, RES_COUNTER,
RES_OP_RESERVE, MLX4_CMD_ALLOC_RES,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_WRAPPED);
if (!err)
*idx = get_param_l(&out_param);
return err;
}
return __mlx4_counter_alloc(dev, idx);
}
EXPORT_SYMBOL_GPL(mlx4_counter_alloc);
void __mlx4_counter_free(struct mlx4_dev *dev, u32 idx)
{
mlx4_bitmap_free(&mlx4_priv(dev)->counters_bitmap, idx);
return;
}
void mlx4_counter_free(struct mlx4_dev *dev, u32 idx)
{
u64 in_param;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, idx);
mlx4_cmd(dev, in_param, RES_COUNTER, RES_OP_RESERVE,
MLX4_CMD_FREE_RES, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_WRAPPED);
return;
}
__mlx4_counter_free(dev, idx);
}
EXPORT_SYMBOL_GPL(mlx4_counter_free);
static int mlx4_setup_hca(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
int port;
__be32 ib_port_default_caps;
err = mlx4_init_uar_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"user access region table, aborting.\n");
return err;
}
err = mlx4_uar_alloc(dev, &priv->driver_uar);
if (err) {
mlx4_err(dev, "Failed to allocate driver access region, "
"aborting.\n");
goto err_uar_table_free;
}
priv->kar = ioremap((phys_addr_t) priv->driver_uar.pfn << PAGE_SHIFT, PAGE_SIZE);
if (!priv->kar) {
mlx4_err(dev, "Couldn't map kernel access region, "
"aborting.\n");
err = -ENOMEM;
goto err_uar_free;
}
err = mlx4_init_pd_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"protection domain table, aborting.\n");
goto err_kar_unmap;
}
err = mlx4_init_xrcd_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"reliable connection domain table, aborting.\n");
goto err_pd_table_free;
}
err = mlx4_init_mr_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"memory region table, aborting.\n");
goto err_xrcd_table_free;
}
err = mlx4_init_eq_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"event queue table, aborting.\n");
goto err_mr_table_free;
}
err = mlx4_cmd_use_events(dev);
if (err) {
mlx4_err(dev, "Failed to switch to event-driven "
"firmware commands, aborting.\n");
goto err_eq_table_free;
}
err = mlx4_NOP(dev);
if (err) {
if (dev->flags & MLX4_FLAG_MSI_X) {
mlx4_warn(dev, "NOP command failed to generate MSI-X "
"interrupt IRQ %d).\n",
priv->eq_table.eq[dev->caps.num_comp_vectors].irq);
mlx4_warn(dev, "Trying again without MSI-X.\n");
} else {
mlx4_err(dev, "NOP command failed to generate interrupt "
"(IRQ %d), aborting.\n",
priv->eq_table.eq[dev->caps.num_comp_vectors].irq);
mlx4_err(dev, "BIOS or ACPI interrupt routing problem?\n");
}
goto err_cmd_poll;
}
mlx4_dbg(dev, "NOP command IRQ test passed\n");
err = mlx4_init_cq_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"completion queue table, aborting.\n");
goto err_cmd_poll;
}
err = mlx4_init_srq_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"shared receive queue table, aborting.\n");
goto err_cq_table_free;
}
err = mlx4_init_qp_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"queue pair table, aborting.\n");
goto err_srq_table_free;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (!mlx4_is_slave(dev)) {
err = mlx4_init_mcg_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"multicast group table, aborting.\n");
goto err_qp_table_free;
}
}
err = mlx4_init_counters_table(dev);
if (err && err != -ENOENT) {
mlx4_err(dev, "Failed to initialize counters table, aborting.\n");
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
goto err_mcg_table_free;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (!mlx4_is_slave(dev)) {
for (port = 1; port <= dev->caps.num_ports; port++) {
ib_port_default_caps = 0;
err = mlx4_get_port_ib_caps(dev, port,
&ib_port_default_caps);
if (err)
mlx4_warn(dev, "failed to get port %d default "
"ib capabilities (%d). Continuing "
"with caps = 0\n", port, err);
dev->caps.ib_port_def_cap[port] = ib_port_default_caps;
/* initialize per-slave default ib port capabilities */
if (mlx4_is_master(dev)) {
int i;
for (i = 0; i < dev->num_slaves; i++) {
if (i == mlx4_master_func_num(dev))
continue;
priv->mfunc.master.slave_state[i].ib_cap_mask[port] =
ib_port_default_caps;
}
}
if (mlx4_is_mfunc(dev))
dev->caps.port_ib_mtu[port] = IB_MTU_2048;
else
dev->caps.port_ib_mtu[port] = IB_MTU_4096;
err = mlx4_SET_PORT(dev, port, mlx4_is_master(dev) ?
dev->caps.pkey_table_len[port] : -1);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (err) {
mlx4_err(dev, "Failed to set port %d, aborting\n",
port);
goto err_counters_table_free;
}
}
}
return 0;
err_counters_table_free:
mlx4_cleanup_counters_table(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err_mcg_table_free:
mlx4_cleanup_mcg_table(dev);
err_qp_table_free:
mlx4_cleanup_qp_table(dev);
err_srq_table_free:
mlx4_cleanup_srq_table(dev);
err_cq_table_free:
mlx4_cleanup_cq_table(dev);
err_cmd_poll:
mlx4_cmd_use_polling(dev);
err_eq_table_free:
mlx4_cleanup_eq_table(dev);
err_mr_table_free:
mlx4_cleanup_mr_table(dev);
err_xrcd_table_free:
mlx4_cleanup_xrcd_table(dev);
err_pd_table_free:
mlx4_cleanup_pd_table(dev);
err_kar_unmap:
iounmap(priv->kar);
err_uar_free:
mlx4_uar_free(dev, &priv->driver_uar);
err_uar_table_free:
mlx4_cleanup_uar_table(dev);
return err;
}
static void mlx4_enable_msi_x(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct msix_entry *entries;
int nreq = min_t(int, dev->caps.num_ports *
min_t(int, netif_get_num_default_rss_queues() + 1,
MAX_MSIX_P_PORT) + MSIX_LEGACY_SZ, MAX_MSIX);
int err;
int i;
if (msi_x) {
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
/* In multifunction mode each function gets 2 msi-X vectors
* one for data path completions anf the other for asynch events
* or command completions */
if (mlx4_is_mfunc(dev)) {
nreq = 2;
} else {
nreq = min_t(int, dev->caps.num_eqs -
dev->caps.reserved_eqs, nreq);
}
entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
goto no_msi;
for (i = 0; i < nreq; ++i)
entries[i].entry = i;
retry:
err = pci_enable_msix(dev->pdev, entries, nreq);
if (err) {
/* Try again if at least 2 vectors are available */
if (err > 1) {
mlx4_info(dev, "Requested %d vectors, "
"but only %d MSI-X vectors available, "
"trying again\n", nreq, err);
nreq = err;
goto retry;
}
kfree(entries);
goto no_msi;
}
if (nreq <
MSIX_LEGACY_SZ + dev->caps.num_ports * MIN_MSIX_P_PORT) {
/*Working in legacy mode , all EQ's shared*/
dev->caps.comp_pool = 0;
dev->caps.num_comp_vectors = nreq - 1;
} else {
dev->caps.comp_pool = nreq - MSIX_LEGACY_SZ;
dev->caps.num_comp_vectors = MSIX_LEGACY_SZ - 1;
}
for (i = 0; i < nreq; ++i)
priv->eq_table.eq[i].irq = entries[i].vector;
dev->flags |= MLX4_FLAG_MSI_X;
kfree(entries);
return;
}
no_msi:
dev->caps.num_comp_vectors = 1;
dev->caps.comp_pool = 0;
for (i = 0; i < 2; ++i)
priv->eq_table.eq[i].irq = dev->pdev->irq;
}
static int mlx4_init_port_info(struct mlx4_dev *dev, int port)
{
struct mlx4_port_info *info = &mlx4_priv(dev)->port[port];
int err = 0;
info->dev = dev;
info->port = port;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (!mlx4_is_slave(dev)) {
INIT_RADIX_TREE(&info->mac_tree, GFP_KERNEL);
mlx4_init_mac_table(dev, &info->mac_table);
mlx4_init_vlan_table(dev, &info->vlan_table);
info->base_qpn =
dev->caps.reserved_qps_base[MLX4_QP_REGION_ETH_ADDR] +
(port - 1) * (1 << log_num_mac);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
}
sprintf(info->dev_name, "mlx4_port%d", port);
info->port_attr.attr.name = info->dev_name;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (mlx4_is_mfunc(dev))
info->port_attr.attr.mode = S_IRUGO;
else {
info->port_attr.attr.mode = S_IRUGO | S_IWUSR;
info->port_attr.store = set_port_type;
}
info->port_attr.show = show_port_type;
sysfs_attr_init(&info->port_attr.attr);
err = device_create_file(&dev->pdev->dev, &info->port_attr);
if (err) {
mlx4_err(dev, "Failed to create file for port %d\n", port);
info->port = -1;
}
sprintf(info->dev_mtu_name, "mlx4_port%d_mtu", port);
info->port_mtu_attr.attr.name = info->dev_mtu_name;
if (mlx4_is_mfunc(dev))
info->port_mtu_attr.attr.mode = S_IRUGO;
else {
info->port_mtu_attr.attr.mode = S_IRUGO | S_IWUSR;
info->port_mtu_attr.store = set_port_ib_mtu;
}
info->port_mtu_attr.show = show_port_ib_mtu;
sysfs_attr_init(&info->port_mtu_attr.attr);
err = device_create_file(&dev->pdev->dev, &info->port_mtu_attr);
if (err) {
mlx4_err(dev, "Failed to create mtu file for port %d\n", port);
device_remove_file(&info->dev->pdev->dev, &info->port_attr);
info->port = -1;
}
return err;
}
static void mlx4_cleanup_port_info(struct mlx4_port_info *info)
{
if (info->port < 0)
return;
device_remove_file(&info->dev->pdev->dev, &info->port_attr);
device_remove_file(&info->dev->pdev->dev, &info->port_mtu_attr);
}
static int mlx4_init_steering(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int num_entries = dev->caps.num_ports;
int i, j;
priv->steer = kzalloc(sizeof(struct mlx4_steer) * num_entries, GFP_KERNEL);
if (!priv->steer)
return -ENOMEM;
for (i = 0; i < num_entries; i++)
for (j = 0; j < MLX4_NUM_STEERS; j++) {
INIT_LIST_HEAD(&priv->steer[i].promisc_qps[j]);
INIT_LIST_HEAD(&priv->steer[i].steer_entries[j]);
}
return 0;
}
static void mlx4_clear_steering(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_steer_index *entry, *tmp_entry;
struct mlx4_promisc_qp *pqp, *tmp_pqp;
int num_entries = dev->caps.num_ports;
int i, j;
for (i = 0; i < num_entries; i++) {
for (j = 0; j < MLX4_NUM_STEERS; j++) {
list_for_each_entry_safe(pqp, tmp_pqp,
&priv->steer[i].promisc_qps[j],
list) {
list_del(&pqp->list);
kfree(pqp);
}
list_for_each_entry_safe(entry, tmp_entry,
&priv->steer[i].steer_entries[j],
list) {
list_del(&entry->list);
list_for_each_entry_safe(pqp, tmp_pqp,
&entry->duplicates,
list) {
list_del(&pqp->list);
kfree(pqp);
}
kfree(entry);
}
}
}
kfree(priv->steer);
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
static int extended_func_num(struct pci_dev *pdev)
{
return PCI_SLOT(pdev->devfn) * 8 + PCI_FUNC(pdev->devfn);
}
#define MLX4_OWNER_BASE 0x8069c
#define MLX4_OWNER_SIZE 4
static int mlx4_get_ownership(struct mlx4_dev *dev)
{
void __iomem *owner;
u32 ret;
if (pci_channel_offline(dev->pdev))
return -EIO;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
owner = ioremap(pci_resource_start(dev->pdev, 0) + MLX4_OWNER_BASE,
MLX4_OWNER_SIZE);
if (!owner) {
mlx4_err(dev, "Failed to obtain ownership bit\n");
return -ENOMEM;
}
ret = readl(owner);
iounmap(owner);
return (int) !!ret;
}
static void mlx4_free_ownership(struct mlx4_dev *dev)
{
void __iomem *owner;
if (pci_channel_offline(dev->pdev))
return;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
owner = ioremap(pci_resource_start(dev->pdev, 0) + MLX4_OWNER_BASE,
MLX4_OWNER_SIZE);
if (!owner) {
mlx4_err(dev, "Failed to obtain ownership bit\n");
return;
}
writel(0, owner);
msleep(1000);
iounmap(owner);
}
static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct mlx4_priv *priv;
struct mlx4_dev *dev;
int err;
int port;
pr_info(DRV_NAME ": Initializing %s\n", pci_name(pdev));
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "Cannot enable PCI device, "
"aborting.\n");
return err;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (num_vfs > MLX4_MAX_NUM_VF) {
printk(KERN_ERR "There are more VF's (%d) than allowed(%d)\n",
num_vfs, MLX4_MAX_NUM_VF);
return -EINVAL;
}
/*
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
* Check for BARs.
*/
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (((id == NULL) || !(id->driver_data & MLX4_VF)) &&
!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
dev_err(&pdev->dev, "Missing DCS, aborting."
"(id == 0X%p, id->driver_data: 0x%lx,"
" pci_resource_flags(pdev, 0):0x%lx)\n", id,
id ? id->driver_data : 0, pci_resource_flags(pdev, 0));
err = -ENODEV;
goto err_disable_pdev;
}
if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
dev_err(&pdev->dev, "Missing UAR, aborting.\n");
err = -ENODEV;
goto err_disable_pdev;
}
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "Couldn't get PCI resources, aborting\n");
goto err_disable_pdev;
}
pci_set_master(pdev);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
if (err) {
dev_warn(&pdev->dev, "Warning: couldn't set 64-bit PCI DMA mask.\n");
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "Can't set PCI DMA mask, aborting.\n");
goto err_release_regions;
}
}
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
if (err) {
dev_warn(&pdev->dev, "Warning: couldn't set 64-bit "
"consistent PCI DMA mask.\n");
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "Can't set consistent PCI DMA mask, "
"aborting.\n");
goto err_release_regions;
}
}
/* Allow large DMA segments, up to the firmware limit of 1 GB */
dma_set_max_seg_size(&pdev->dev, 1024 * 1024 * 1024);
priv = kzalloc(sizeof *priv, GFP_KERNEL);
if (!priv) {
dev_err(&pdev->dev, "Device struct alloc failed, "
"aborting.\n");
err = -ENOMEM;
goto err_release_regions;
}
dev = &priv->dev;
dev->pdev = pdev;
INIT_LIST_HEAD(&priv->ctx_list);
spin_lock_init(&priv->ctx_lock);
mutex_init(&priv->port_mutex);
INIT_LIST_HEAD(&priv->pgdir_list);
mutex_init(&priv->pgdir_mutex);
INIT_LIST_HEAD(&priv->bf_list);
mutex_init(&priv->bf_mutex);
dev->rev_id = pdev->revision;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
/* Detect if this device is a virtual function */
if (id && id->driver_data & MLX4_VF) {
/* When acting as pf, we normally skip vfs unless explicitly
* requested to probe them. */
if (num_vfs && extended_func_num(pdev) > probe_vf) {
mlx4_warn(dev, "Skipping virtual function:%d\n",
extended_func_num(pdev));
err = -ENODEV;
goto err_free_dev;
}
mlx4_warn(dev, "Detected virtual function - running in slave mode\n");
dev->flags |= MLX4_FLAG_SLAVE;
} else {
/* We reset the device and enable SRIOV only for physical
* devices. Try to claim ownership on the device;
* if already taken, skip -- do not allow multiple PFs */
err = mlx4_get_ownership(dev);
if (err) {
if (err < 0)
goto err_free_dev;
else {
mlx4_warn(dev, "Multiple PFs not yet supported."
" Skipping PF.\n");
err = -EINVAL;
goto err_free_dev;
}
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (num_vfs) {
mlx4_warn(dev, "Enabling sriov with:%d vfs\n", num_vfs);
err = pci_enable_sriov(pdev, num_vfs);
if (err) {
mlx4_err(dev, "Failed to enable sriov,"
"continuing without sriov enabled"
" (err = %d).\n", err);
err = 0;
} else {
mlx4_warn(dev, "Running in master mode\n");
dev->flags |= MLX4_FLAG_SRIOV |
MLX4_FLAG_MASTER;
dev->num_vfs = num_vfs;
}
}
/*
* Now reset the HCA before we touch the PCI capabilities or
* attempt a firmware command, since a boot ROM may have left
* the HCA in an undefined state.
*/
err = mlx4_reset(dev);
if (err) {
mlx4_err(dev, "Failed to reset HCA, aborting.\n");
goto err_rel_own;
}
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
slave_start:
err = mlx4_cmd_init(dev);
if (err) {
mlx4_err(dev, "Failed to init command interface, aborting.\n");
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
goto err_sriov;
}
/* In slave functions, the communication channel must be initialized
* before posting commands. Also, init num_slaves before calling
* mlx4_init_hca */
if (mlx4_is_mfunc(dev)) {
if (mlx4_is_master(dev))
dev->num_slaves = MLX4_MAX_NUM_SLAVES;
else {
dev->num_slaves = 0;
if (mlx4_multi_func_init(dev)) {
mlx4_err(dev, "Failed to init slave mfunc"
" interface, aborting.\n");
goto err_cmd;
}
}
}
err = mlx4_init_hca(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (err) {
if (err == -EACCES) {
/* Not primary Physical function
* Running in slave mode */
mlx4_cmd_cleanup(dev);
dev->flags |= MLX4_FLAG_SLAVE;
dev->flags &= ~MLX4_FLAG_MASTER;
goto slave_start;
} else
goto err_mfunc;
}
/* In master functions, the communication channel must be initialized
* after obtaining its address from fw */
if (mlx4_is_master(dev)) {
if (mlx4_multi_func_init(dev)) {
mlx4_err(dev, "Failed to init master mfunc"
"interface, aborting.\n");
goto err_close;
}
}
err = mlx4_alloc_eq_table(dev);
if (err)
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
goto err_master_mfunc;
priv->msix_ctl.pool_bm = 0;
mutex_init(&priv->msix_ctl.pool_lock);
mlx4_enable_msi_x(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if ((mlx4_is_mfunc(dev)) &&
!(dev->flags & MLX4_FLAG_MSI_X)) {
mlx4_err(dev, "INTx is not supported in multi-function mode."
" aborting.\n");
goto err_free_eq;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
}
if (!mlx4_is_slave(dev)) {
err = mlx4_init_steering(dev);
if (err)
goto err_free_eq;
}
err = mlx4_setup_hca(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) &&
!mlx4_is_mfunc(dev)) {
dev->flags &= ~MLX4_FLAG_MSI_X;
dev->caps.num_comp_vectors = 1;
dev->caps.comp_pool = 0;
pci_disable_msix(pdev);
err = mlx4_setup_hca(dev);
}
if (err)
goto err_steer;
for (port = 1; port <= dev->caps.num_ports; port++) {
err = mlx4_init_port_info(dev, port);
if (err)
goto err_port;
}
err = mlx4_register_device(dev);
if (err)
goto err_port;
mlx4_sense_init(dev);
mlx4_start_sense(dev);
pci_set_drvdata(pdev, dev);
return 0;
err_port:
for (--port; port >= 1; --port)
mlx4_cleanup_port_info(&priv->port[port]);
mlx4_cleanup_counters_table(dev);
mlx4_cleanup_mcg_table(dev);
mlx4_cleanup_qp_table(dev);
mlx4_cleanup_srq_table(dev);
mlx4_cleanup_cq_table(dev);
mlx4_cmd_use_polling(dev);
mlx4_cleanup_eq_table(dev);
mlx4_cleanup_mr_table(dev);
mlx4_cleanup_xrcd_table(dev);
mlx4_cleanup_pd_table(dev);
mlx4_cleanup_uar_table(dev);
err_steer:
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (!mlx4_is_slave(dev))
mlx4_clear_steering(dev);
err_free_eq:
mlx4_free_eq_table(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err_master_mfunc:
if (mlx4_is_master(dev))
mlx4_multi_func_cleanup(dev);
err_close:
if (dev->flags & MLX4_FLAG_MSI_X)
pci_disable_msix(pdev);
mlx4_close_hca(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err_mfunc:
if (mlx4_is_slave(dev))
mlx4_multi_func_cleanup(dev);
err_cmd:
mlx4_cmd_cleanup(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
err_sriov:
if (dev->flags & MLX4_FLAG_SRIOV)
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
pci_disable_sriov(pdev);
err_rel_own:
if (!mlx4_is_slave(dev))
mlx4_free_ownership(dev);
err_free_dev:
kfree(priv);
err_release_regions:
pci_release_regions(pdev);
err_disable_pdev:
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
return err;
}
static int __devinit mlx4_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
printk_once(KERN_INFO "%s", mlx4_version);
return __mlx4_init_one(pdev, id);
}
static void mlx4_remove_one(struct pci_dev *pdev)
{
struct mlx4_dev *dev = pci_get_drvdata(pdev);
struct mlx4_priv *priv = mlx4_priv(dev);
int p;
if (dev) {
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
/* in SRIOV it is not allowed to unload the pf's
* driver while there are alive vf's */
if (mlx4_is_master(dev)) {
if (mlx4_how_many_lives_vf(dev))
printk(KERN_ERR "Removing PF when there are assigned VF's !!!\n");
}
mlx4_stop_sense(dev);
mlx4_unregister_device(dev);
for (p = 1; p <= dev->caps.num_ports; p++) {
mlx4_cleanup_port_info(&priv->port[p]);
mlx4_CLOSE_PORT(dev, p);
}
if (mlx4_is_master(dev))
mlx4_free_resource_tracker(dev,
RES_TR_FREE_SLAVES_ONLY);
mlx4_cleanup_counters_table(dev);
mlx4_cleanup_mcg_table(dev);
mlx4_cleanup_qp_table(dev);
mlx4_cleanup_srq_table(dev);
mlx4_cleanup_cq_table(dev);
mlx4_cmd_use_polling(dev);
mlx4_cleanup_eq_table(dev);
mlx4_cleanup_mr_table(dev);
mlx4_cleanup_xrcd_table(dev);
mlx4_cleanup_pd_table(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (mlx4_is_master(dev))
mlx4_free_resource_tracker(dev,
RES_TR_FREE_STRUCTS_ONLY);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
iounmap(priv->kar);
mlx4_uar_free(dev, &priv->driver_uar);
mlx4_cleanup_uar_table(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (!mlx4_is_slave(dev))
mlx4_clear_steering(dev);
mlx4_free_eq_table(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (mlx4_is_master(dev))
mlx4_multi_func_cleanup(dev);
mlx4_close_hca(dev);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (mlx4_is_slave(dev))
mlx4_multi_func_cleanup(dev);
mlx4_cmd_cleanup(dev);
if (dev->flags & MLX4_FLAG_MSI_X)
pci_disable_msix(pdev);
if (dev->flags & MLX4_FLAG_SRIOV) {
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
mlx4_warn(dev, "Disabling sriov\n");
pci_disable_sriov(pdev);
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
if (!mlx4_is_slave(dev))
mlx4_free_ownership(dev);
kfree(dev->caps.qp0_tunnel);
kfree(dev->caps.qp0_proxy);
kfree(dev->caps.qp1_tunnel);
kfree(dev->caps.qp1_proxy);
kfree(priv);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
}
int mlx4_restart_one(struct pci_dev *pdev)
{
mlx4_remove_one(pdev);
return __mlx4_init_one(pdev, NULL);
}
static DEFINE_PCI_DEVICE_TABLE(mlx4_pci_table) = {
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
/* MT25408 "Hermon" SDR */
{ PCI_VDEVICE(MELLANOX, 0x6340), 0 },
/* MT25408 "Hermon" DDR */
{ PCI_VDEVICE(MELLANOX, 0x634a), 0 },
/* MT25408 "Hermon" QDR */
{ PCI_VDEVICE(MELLANOX, 0x6354), 0 },
/* MT25408 "Hermon" DDR PCIe gen2 */
{ PCI_VDEVICE(MELLANOX, 0x6732), 0 },
/* MT25408 "Hermon" QDR PCIe gen2 */
{ PCI_VDEVICE(MELLANOX, 0x673c), 0 },
/* MT25408 "Hermon" EN 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x6368), 0 },
/* MT25408 "Hermon" EN 10GigE PCIe gen2 */
{ PCI_VDEVICE(MELLANOX, 0x6750), 0 },
/* MT25458 ConnectX EN 10GBASE-T 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x6372), 0 },
/* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x675a), 0 },
/* MT26468 ConnectX EN 10GigE PCIe gen2*/
{ PCI_VDEVICE(MELLANOX, 0x6764), 0 },
/* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */
{ PCI_VDEVICE(MELLANOX, 0x6746), 0 },
/* MT26478 ConnectX2 40GigE PCIe gen2 */
{ PCI_VDEVICE(MELLANOX, 0x676e), 0 },
/* MT25400 Family [ConnectX-2 Virtual Function] */
{ PCI_VDEVICE(MELLANOX, 0x1002), MLX4_VF },
/* MT27500 Family [ConnectX-3] */
{ PCI_VDEVICE(MELLANOX, 0x1003), 0 },
/* MT27500 Family [ConnectX-3 Virtual Function] */
{ PCI_VDEVICE(MELLANOX, 0x1004), MLX4_VF },
{ PCI_VDEVICE(MELLANOX, 0x1005), 0 }, /* MT27510 Family */
{ PCI_VDEVICE(MELLANOX, 0x1006), 0 }, /* MT27511 Family */
{ PCI_VDEVICE(MELLANOX, 0x1007), 0 }, /* MT27520 Family */
{ PCI_VDEVICE(MELLANOX, 0x1008), 0 }, /* MT27521 Family */
{ PCI_VDEVICE(MELLANOX, 0x1009), 0 }, /* MT27530 Family */
{ PCI_VDEVICE(MELLANOX, 0x100a), 0 }, /* MT27531 Family */
{ PCI_VDEVICE(MELLANOX, 0x100b), 0 }, /* MT27540 Family */
{ PCI_VDEVICE(MELLANOX, 0x100c), 0 }, /* MT27541 Family */
{ PCI_VDEVICE(MELLANOX, 0x100d), 0 }, /* MT27550 Family */
{ PCI_VDEVICE(MELLANOX, 0x100e), 0 }, /* MT27551 Family */
{ PCI_VDEVICE(MELLANOX, 0x100f), 0 }, /* MT27560 Family */
{ PCI_VDEVICE(MELLANOX, 0x1010), 0 }, /* MT27561 Family */
{ 0, }
};
MODULE_DEVICE_TABLE(pci, mlx4_pci_table);
static pci_ers_result_t mlx4_pci_err_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
mlx4_remove_one(pdev);
return state == pci_channel_io_perm_failure ?
PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET;
}
static pci_ers_result_t mlx4_pci_slot_reset(struct pci_dev *pdev)
{
int ret = __mlx4_init_one(pdev, NULL);
return ret ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
}
static struct pci_error_handlers mlx4_err_handler = {
.error_detected = mlx4_pci_err_detected,
.slot_reset = mlx4_pci_slot_reset,
};
static struct pci_driver mlx4_driver = {
.name = DRV_NAME,
.id_table = mlx4_pci_table,
.probe = mlx4_init_one,
.remove = __devexit_p(mlx4_remove_one),
.err_handler = &mlx4_err_handler,
};
static int __init mlx4_verify_params(void)
{
if ((log_num_mac < 0) || (log_num_mac > 7)) {
pr_warning("mlx4_core: bad num_mac: %d\n", log_num_mac);
return -1;
}
if (log_num_vlan != 0)
pr_warning("mlx4_core: log_num_vlan - obsolete module param, using %d\n",
MLX4_LOG_NUM_VLANS);
if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 7)) {
pr_warning("mlx4_core: bad log_mtts_per_seg: %d\n", log_mtts_per_seg);
return -1;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
/* Check if module param for ports type has legal combination */
if (port_type_array[0] == false && port_type_array[1] == true) {
printk(KERN_WARNING "Module parameter configuration ETH/IB is not supported. Switching to default configuration IB/IB\n");
port_type_array[0] = true;
}
return 0;
}
static int __init mlx4_init(void)
{
int ret;
if (mlx4_verify_params())
return -EINVAL;
mlx4_catas_init();
mlx4_wq = create_singlethread_workqueue("mlx4");
if (!mlx4_wq)
return -ENOMEM;
ret = pci_register_driver(&mlx4_driver);
return ret < 0 ? ret : 0;
}
static void __exit mlx4_cleanup(void)
{
pci_unregister_driver(&mlx4_driver);
destroy_workqueue(mlx4_wq);
}
module_init(mlx4_init);
module_exit(mlx4_cleanup);