AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-24 20:50:53 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
68c5735eaa
linux_dsm_epyc7002/drivers/media/rc/ir-spi.c

199 lines
4.5 KiB
C
Raw Normal View History

media: ir-spi: add SPDX identifier Replace the original license statement with the SPDX identifier. Update also the copyright owner adding myself as co-owner of the copyright. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-12 14:47:20 +07:00
// SPDX-License-Identifier: GPL-2.0
// SPI driven IR LED device driver
//
// Copyright (c) 2016 Samsung Electronics Co., Ltd.
// Copyright (c) Andi Shyti <andi.shyti@samsung.com>
[media] rc: add support for IR LEDs driven through SPI The ir-spi is a simple device driver which supports the connection between an IR LED and the MOSI line of an SPI device. The driver, indeed, uses the SPI framework to stream the raw data provided by userspace through an rc character device. The chardev is handled by the LIRC framework and its functionality basically provides: - write: the driver gets a pulse/space signal and translates it to a binary signal that will be streamed to the IR led through the SPI framework. - set frequency: sets the frequency whith which the data should be sent. This is handle with ioctl with the LIRC_SET_SEND_CARRIER flag (as per lirc documentation) - set duty cycle: this is also handled with ioctl with the LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data. The character device is created under /dev/lircX name, where X is and ID assigned by the LIRC framework. Example of usage: fd = open("/dev/lirc0", O_RDWR); if (fd < 0) return -1; val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); if (ret < 0) return -1; val = 60; ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val); if (ret < 0) return -1; n = write(fd, buffer, BUF_LEN); if (n < 0 || n != BUF_LEN) ret = -1; close(fd); Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-16 13:12:18 +07:00
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <media/rc-core.h>
#define IR_SPI_DRIVER_NAME "ir-spi"
/* pulse value for different duty cycles */
#define IR_SPI_PULSE_DC_50 0xff00
#define IR_SPI_PULSE_DC_60 0xfc00
#define IR_SPI_PULSE_DC_70 0xf800
#define IR_SPI_PULSE_DC_75 0xf000
#define IR_SPI_PULSE_DC_80 0xc000
#define IR_SPI_PULSE_DC_90 0x8000
#define IR_SPI_DEFAULT_FREQUENCY 38000
#define IR_SPI_BIT_PER_WORD 8
#define IR_SPI_MAX_BUFSIZE 4096
struct ir_spi_data {
u32 freq;
u8 duty_cycle;
bool negated;
u16 tx_buf[IR_SPI_MAX_BUFSIZE];
u16 pulse;
u16 space;
struct rc_dev *rc;
struct spi_device *spi;
struct regulator *regulator;
};
static int ir_spi_tx(struct rc_dev *dev,
unsigned int *buffer, unsigned int count)
{
int i;
int ret;
unsigned int len = 0;
struct ir_spi_data *idata = dev->priv;
struct spi_transfer xfer;
/* convert the pulse/space signal to raw binary signal */
for (i = 0; i < count; i++) {
[media] ir-spi: Fix issues with lirc API The ir-spi driver has 2 issues which prevents it from working with lirc: 1. The ir-spi driver uses 16 bits of SPI data to create one cycle of the waveform. As such our SPI clock needs to be 16x faster than the carrier frequency. The driver is inconsistent in how it currently handles this. It initializes it to the carrier frequency: But the commit message has some example code which initialises it to 16x the carrier frequency: val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); To maintain compatibility with lirc, always do the frequency adjustment in the driver. 2. lirc presents pulses in microseconds, but the ir-spi driver treats them as cycles of the carrier. Similar to other lirc drivers, do the conversion with DIV_ROUND_CLOSEST(). Fixes: fe052da49201 ("[media] rc: add support for IR LEDs driven through SPI") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-07 08:00:11 +07:00
unsigned int periods;
[media] rc: add support for IR LEDs driven through SPI The ir-spi is a simple device driver which supports the connection between an IR LED and the MOSI line of an SPI device. The driver, indeed, uses the SPI framework to stream the raw data provided by userspace through an rc character device. The chardev is handled by the LIRC framework and its functionality basically provides: - write: the driver gets a pulse/space signal and translates it to a binary signal that will be streamed to the IR led through the SPI framework. - set frequency: sets the frequency whith which the data should be sent. This is handle with ioctl with the LIRC_SET_SEND_CARRIER flag (as per lirc documentation) - set duty cycle: this is also handled with ioctl with the LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data. The character device is created under /dev/lircX name, where X is and ID assigned by the LIRC framework. Example of usage: fd = open("/dev/lirc0", O_RDWR); if (fd < 0) return -1; val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); if (ret < 0) return -1; val = 60; ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val); if (ret < 0) return -1; n = write(fd, buffer, BUF_LEN); if (n < 0 || n != BUF_LEN) ret = -1; close(fd); Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-16 13:12:18 +07:00
int j;
[media] rc: ir-spi: remove unnecessary initialization Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-27 20:34:35 +07:00
u16 val;
[media] rc: add support for IR LEDs driven through SPI The ir-spi is a simple device driver which supports the connection between an IR LED and the MOSI line of an SPI device. The driver, indeed, uses the SPI framework to stream the raw data provided by userspace through an rc character device. The chardev is handled by the LIRC framework and its functionality basically provides: - write: the driver gets a pulse/space signal and translates it to a binary signal that will be streamed to the IR led through the SPI framework. - set frequency: sets the frequency whith which the data should be sent. This is handle with ioctl with the LIRC_SET_SEND_CARRIER flag (as per lirc documentation) - set duty cycle: this is also handled with ioctl with the LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data. The character device is created under /dev/lircX name, where X is and ID assigned by the LIRC framework. Example of usage: fd = open("/dev/lirc0", O_RDWR); if (fd < 0) return -1; val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); if (ret < 0) return -1; val = 60; ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val); if (ret < 0) return -1; n = write(fd, buffer, BUF_LEN); if (n < 0 || n != BUF_LEN) ret = -1; close(fd); Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-16 13:12:18 +07:00
[media] ir-spi: Fix issues with lirc API The ir-spi driver has 2 issues which prevents it from working with lirc: 1. The ir-spi driver uses 16 bits of SPI data to create one cycle of the waveform. As such our SPI clock needs to be 16x faster than the carrier frequency. The driver is inconsistent in how it currently handles this. It initializes it to the carrier frequency: But the commit message has some example code which initialises it to 16x the carrier frequency: val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); To maintain compatibility with lirc, always do the frequency adjustment in the driver. 2. lirc presents pulses in microseconds, but the ir-spi driver treats them as cycles of the carrier. Similar to other lirc drivers, do the conversion with DIV_ROUND_CLOSEST(). Fixes: fe052da49201 ("[media] rc: add support for IR LEDs driven through SPI") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-07 08:00:11 +07:00
periods = DIV_ROUND_CLOSEST(buffer[i] * idata->freq, 1000000);
if (len + periods >= IR_SPI_MAX_BUFSIZE)
[media] rc: add support for IR LEDs driven through SPI The ir-spi is a simple device driver which supports the connection between an IR LED and the MOSI line of an SPI device. The driver, indeed, uses the SPI framework to stream the raw data provided by userspace through an rc character device. The chardev is handled by the LIRC framework and its functionality basically provides: - write: the driver gets a pulse/space signal and translates it to a binary signal that will be streamed to the IR led through the SPI framework. - set frequency: sets the frequency whith which the data should be sent. This is handle with ioctl with the LIRC_SET_SEND_CARRIER flag (as per lirc documentation) - set duty cycle: this is also handled with ioctl with the LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data. The character device is created under /dev/lircX name, where X is and ID assigned by the LIRC framework. Example of usage: fd = open("/dev/lirc0", O_RDWR); if (fd < 0) return -1; val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); if (ret < 0) return -1; val = 60; ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val); if (ret < 0) return -1; n = write(fd, buffer, BUF_LEN); if (n < 0 || n != BUF_LEN) ret = -1; close(fd); Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-16 13:12:18 +07:00
return -EINVAL;
/*
* the first value in buffer is a pulse, so that 0, 2, 4, ...
* contain a pulse duration. On the contrary, 1, 3, 5, ...
* contain a space duration.
*/
val = (i % 2) ? idata->space : idata->pulse;
[media] ir-spi: Fix issues with lirc API The ir-spi driver has 2 issues which prevents it from working with lirc: 1. The ir-spi driver uses 16 bits of SPI data to create one cycle of the waveform. As such our SPI clock needs to be 16x faster than the carrier frequency. The driver is inconsistent in how it currently handles this. It initializes it to the carrier frequency: But the commit message has some example code which initialises it to 16x the carrier frequency: val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); To maintain compatibility with lirc, always do the frequency adjustment in the driver. 2. lirc presents pulses in microseconds, but the ir-spi driver treats them as cycles of the carrier. Similar to other lirc drivers, do the conversion with DIV_ROUND_CLOSEST(). Fixes: fe052da49201 ("[media] rc: add support for IR LEDs driven through SPI") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-07 08:00:11 +07:00
for (j = 0; j < periods; j++)
[media] rc: add support for IR LEDs driven through SPI The ir-spi is a simple device driver which supports the connection between an IR LED and the MOSI line of an SPI device. The driver, indeed, uses the SPI framework to stream the raw data provided by userspace through an rc character device. The chardev is handled by the LIRC framework and its functionality basically provides: - write: the driver gets a pulse/space signal and translates it to a binary signal that will be streamed to the IR led through the SPI framework. - set frequency: sets the frequency whith which the data should be sent. This is handle with ioctl with the LIRC_SET_SEND_CARRIER flag (as per lirc documentation) - set duty cycle: this is also handled with ioctl with the LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data. The character device is created under /dev/lircX name, where X is and ID assigned by the LIRC framework. Example of usage: fd = open("/dev/lirc0", O_RDWR); if (fd < 0) return -1; val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); if (ret < 0) return -1; val = 60; ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val); if (ret < 0) return -1; n = write(fd, buffer, BUF_LEN); if (n < 0 || n != BUF_LEN) ret = -1; close(fd); Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-16 13:12:18 +07:00
idata->tx_buf[len++] = val;
}
memset(&xfer, 0, sizeof(xfer));
[media] ir-spi: Fix issues with lirc API The ir-spi driver has 2 issues which prevents it from working with lirc: 1. The ir-spi driver uses 16 bits of SPI data to create one cycle of the waveform. As such our SPI clock needs to be 16x faster than the carrier frequency. The driver is inconsistent in how it currently handles this. It initializes it to the carrier frequency: But the commit message has some example code which initialises it to 16x the carrier frequency: val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); To maintain compatibility with lirc, always do the frequency adjustment in the driver. 2. lirc presents pulses in microseconds, but the ir-spi driver treats them as cycles of the carrier. Similar to other lirc drivers, do the conversion with DIV_ROUND_CLOSEST(). Fixes: fe052da49201 ("[media] rc: add support for IR LEDs driven through SPI") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-07 08:00:11 +07:00
xfer.speed_hz = idata->freq * 16;
[media] rc: add support for IR LEDs driven through SPI The ir-spi is a simple device driver which supports the connection between an IR LED and the MOSI line of an SPI device. The driver, indeed, uses the SPI framework to stream the raw data provided by userspace through an rc character device. The chardev is handled by the LIRC framework and its functionality basically provides: - write: the driver gets a pulse/space signal and translates it to a binary signal that will be streamed to the IR led through the SPI framework. - set frequency: sets the frequency whith which the data should be sent. This is handle with ioctl with the LIRC_SET_SEND_CARRIER flag (as per lirc documentation) - set duty cycle: this is also handled with ioctl with the LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data. The character device is created under /dev/lircX name, where X is and ID assigned by the LIRC framework. Example of usage: fd = open("/dev/lirc0", O_RDWR); if (fd < 0) return -1; val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); if (ret < 0) return -1; val = 60; ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val); if (ret < 0) return -1; n = write(fd, buffer, BUF_LEN); if (n < 0 || n != BUF_LEN) ret = -1; close(fd); Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-16 13:12:18 +07:00
xfer.len = len * sizeof(*idata->tx_buf);
xfer.tx_buf = idata->tx_buf;
ret = regulator_enable(idata->regulator);
if (ret)
return ret;
ret = spi_sync_transfer(idata->spi, &xfer, 1);
if (ret)
dev_err(&idata->spi->dev, "unable to deliver the signal\n");
regulator_disable(idata->regulator);
return ret ? ret : count;
}
static int ir_spi_set_tx_carrier(struct rc_dev *dev, u32 carrier)
{
struct ir_spi_data *idata = dev->priv;
if (!carrier)
return -EINVAL;
idata->freq = carrier;
return 0;
}
static int ir_spi_set_duty_cycle(struct rc_dev *dev, u32 duty_cycle)
{
struct ir_spi_data *idata = dev->priv;
if (duty_cycle >= 90)
idata->pulse = IR_SPI_PULSE_DC_90;
else if (duty_cycle >= 80)
idata->pulse = IR_SPI_PULSE_DC_80;
else if (duty_cycle >= 75)
idata->pulse = IR_SPI_PULSE_DC_75;
else if (duty_cycle >= 70)
idata->pulse = IR_SPI_PULSE_DC_70;
else if (duty_cycle >= 60)
idata->pulse = IR_SPI_PULSE_DC_60;
else
idata->pulse = IR_SPI_PULSE_DC_50;
if (idata->negated) {
idata->pulse = ~idata->pulse;
idata->space = 0xffff;
} else {
idata->space = 0;
}
return 0;
}
static int ir_spi_probe(struct spi_device *spi)
{
int ret;
u8 dc;
struct ir_spi_data *idata;
idata = devm_kzalloc(&spi->dev, sizeof(*idata), GFP_KERNEL);
if (!idata)
return -ENOMEM;
idata->regulator = devm_regulator_get(&spi->dev, "irda_regulator");
if (IS_ERR(idata->regulator))
return PTR_ERR(idata->regulator);
idata->rc = devm_rc_allocate_device(&spi->dev, RC_DRIVER_IR_RAW_TX);
if (!idata->rc)
return -ENOMEM;
idata->rc->tx_ir = ir_spi_tx;
idata->rc->s_tx_carrier = ir_spi_set_tx_carrier;
idata->rc->s_tx_duty_cycle = ir_spi_set_duty_cycle;
media: rc-core: rename input_name to device_name When an ir-spi is registered, you get this message. rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0 "Unspecified device" refers to input_name, which makes no sense for IR TX only devices. So, rename to device_name. Also make driver_name const char* so that no casts are needed anywhere. Now ir-spi reports: rc rc0: IR SPI as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0 Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-01 23:13:19 +07:00
idata->rc->device_name = "IR SPI";
[media] rc: add support for IR LEDs driven through SPI The ir-spi is a simple device driver which supports the connection between an IR LED and the MOSI line of an SPI device. The driver, indeed, uses the SPI framework to stream the raw data provided by userspace through an rc character device. The chardev is handled by the LIRC framework and its functionality basically provides: - write: the driver gets a pulse/space signal and translates it to a binary signal that will be streamed to the IR led through the SPI framework. - set frequency: sets the frequency whith which the data should be sent. This is handle with ioctl with the LIRC_SET_SEND_CARRIER flag (as per lirc documentation) - set duty cycle: this is also handled with ioctl with the LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data. The character device is created under /dev/lircX name, where X is and ID assigned by the LIRC framework. Example of usage: fd = open("/dev/lirc0", O_RDWR); if (fd < 0) return -1; val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); if (ret < 0) return -1; val = 60; ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val); if (ret < 0) return -1; n = write(fd, buffer, BUF_LEN); if (n < 0 || n != BUF_LEN) ret = -1; close(fd); Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-16 13:12:18 +07:00
idata->rc->driver_name = IR_SPI_DRIVER_NAME;
idata->rc->priv = idata;
idata->spi = spi;
idata->negated = of_property_read_bool(spi->dev.of_node,
"led-active-low");
ret = of_property_read_u8(spi->dev.of_node, "duty-cycle", &dc);
if (ret)
dc = 50;
/* ir_spi_set_duty_cycle cannot fail,
* it returns int to be compatible with the
* rc->s_tx_duty_cycle function
*/
ir_spi_set_duty_cycle(idata->rc, dc);
idata->freq = IR_SPI_DEFAULT_FREQUENCY;
return devm_rc_register_device(&spi->dev, idata->rc);
}
static int ir_spi_remove(struct spi_device *spi)
{
return 0;
}
static const struct of_device_id ir_spi_of_match[] = {
{ .compatible = "ir-spi-led" },
{},
};
static struct spi_driver ir_spi_driver = {
.probe = ir_spi_probe,
.remove = ir_spi_remove,
.driver = {
.name = IR_SPI_DRIVER_NAME,
.of_match_table = ir_spi_of_match,
},
};
module_spi_driver(ir_spi_driver);
MODULE_AUTHOR("Andi Shyti <andi.shyti@samsung.com>");
MODULE_DESCRIPTION("SPI IR LED");
MODULE_LICENSE("GPL v2");
Reference in New Issue Copy Permalink