ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
/*
|
|
|
|
* ring buffer based function tracer
|
|
|
|
*
|
|
|
|
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
|
|
|
|
* Copyright (C) 2008 Ingo Molnar <mingo@redhat.com>
|
|
|
|
*
|
|
|
|
* Based on code from the latency_tracer, that is:
|
|
|
|
*
|
|
|
|
* Copyright (C) 2004-2006 Ingo Molnar
|
|
|
|
* Copyright (C) 2004 William Lee Irwin III
|
|
|
|
*/
|
2009-02-15 07:04:24 +07:00
|
|
|
#include <linux/ring_buffer.h>
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
#include <linux/debugfs.h>
|
|
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <linux/ftrace.h>
|
2012-07-10 07:10:42 +07:00
|
|
|
#include <linux/pstore.h>
|
2008-05-13 02:20:49 +07:00
|
|
|
#include <linux/fs.h>
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
|
|
|
|
#include "trace.h"
|
|
|
|
|
2009-01-16 11:06:03 +07:00
|
|
|
/* function tracing enabled */
|
|
|
|
static int ftrace_function_enabled;
|
|
|
|
|
2009-01-16 07:12:40 +07:00
|
|
|
static struct trace_array *func_trace;
|
|
|
|
|
2009-01-16 11:06:03 +07:00
|
|
|
static void tracing_start_function_trace(void);
|
|
|
|
static void tracing_stop_function_trace(void);
|
|
|
|
|
2009-02-06 03:02:00 +07:00
|
|
|
static int function_trace_init(struct trace_array *tr)
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
{
|
2009-01-16 08:40:23 +07:00
|
|
|
func_trace = tr;
|
2008-07-11 07:58:14 +07:00
|
|
|
tr->cpu = get_cpu();
|
|
|
|
put_cpu();
|
|
|
|
|
2008-05-22 22:49:22 +07:00
|
|
|
tracing_start_cmdline_record();
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
tracing_start_function_trace();
|
2008-11-16 11:57:26 +07:00
|
|
|
return 0;
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
}
|
|
|
|
|
2008-05-13 02:20:51 +07:00
|
|
|
static void function_trace_reset(struct trace_array *tr)
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
{
|
2009-02-06 03:02:00 +07:00
|
|
|
tracing_stop_function_trace();
|
|
|
|
tracing_stop_cmdline_record();
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
}
|
|
|
|
|
ftrace: restructure tracing start/stop infrastructure
Impact: change where tracing is started up and stopped
Currently, when a new tracer is selected via echo'ing a tracer name into
the current_tracer file, the startup is only done if tracing_enabled is
set to one. If tracing_enabled is changed to zero (by echo'ing 0 into
the tracing_enabled file) a full shutdown is performed.
The full startup and shutdown of a tracer can be expensive and the
user can lose out traces when echo'ing in 0 to the tracing_enabled file,
because the process takes too long. There can also be places that
the user would like to start and stop the tracer several times and
doing the full startup and shutdown of a tracer might be too expensive.
This patch performs the full startup and shutdown when a tracer is
selected. It also adds a way to do a quick start or stop of a tracer.
The quick version is just a flag that prevents the tracing from
taking place, but the overhead of the code is still there.
For example, the startup of a tracer may enable tracepoints, or enable
the function tracer. The stop and start will just set a flag to
have the tracer ignore the calls when the tracepoint or function trace
is called. The overhead of the tracer may still be present when
the tracer is stopped, but no tracing will occur. Setting the tracer
to the 'nop' tracer (or any other tracer) will perform the shutdown
of the tracer which will disable the tracepoint or disable the
function tracer.
The tracing_enabled file will simply start or stop tracing.
This change is all internal. The end result for the user should be the same
as before. If tracing_enabled is not set, no trace will happen.
If tracing_enabled is set, then the trace will happen. The tracing_enabled
variable is static between tracers. Enabling tracing_enabled and
going to another tracer will keep tracing_enabled enabled. Same
is true with disabling tracing_enabled.
This patch will now provide a fast start/stop method to the users
for enabling or disabling tracing.
Note: There were two methods to the struct tracer that were never
used: The methods start and stop. These were to be used as a hook
to the reading of the trace output, but ended up not being
necessary. These two methods are now used to enable the start
and stop of each tracer, in case the tracer needs to do more than
just not write into the buffer. For example, the irqsoff tracer
must stop recording max latencies when tracing is stopped.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 04:05:44 +07:00
|
|
|
static void function_trace_start(struct trace_array *tr)
|
|
|
|
{
|
2008-12-19 17:08:39 +07:00
|
|
|
tracing_reset_online_cpus(tr);
|
ftrace: restructure tracing start/stop infrastructure
Impact: change where tracing is started up and stopped
Currently, when a new tracer is selected via echo'ing a tracer name into
the current_tracer file, the startup is only done if tracing_enabled is
set to one. If tracing_enabled is changed to zero (by echo'ing 0 into
the tracing_enabled file) a full shutdown is performed.
The full startup and shutdown of a tracer can be expensive and the
user can lose out traces when echo'ing in 0 to the tracing_enabled file,
because the process takes too long. There can also be places that
the user would like to start and stop the tracer several times and
doing the full startup and shutdown of a tracer might be too expensive.
This patch performs the full startup and shutdown when a tracer is
selected. It also adds a way to do a quick start or stop of a tracer.
The quick version is just a flag that prevents the tracing from
taking place, but the overhead of the code is still there.
For example, the startup of a tracer may enable tracepoints, or enable
the function tracer. The stop and start will just set a flag to
have the tracer ignore the calls when the tracepoint or function trace
is called. The overhead of the tracer may still be present when
the tracer is stopped, but no tracing will occur. Setting the tracer
to the 'nop' tracer (or any other tracer) will perform the shutdown
of the tracer which will disable the tracepoint or disable the
function tracer.
The tracing_enabled file will simply start or stop tracing.
This change is all internal. The end result for the user should be the same
as before. If tracing_enabled is not set, no trace will happen.
If tracing_enabled is set, then the trace will happen. The tracing_enabled
variable is static between tracers. Enabling tracing_enabled and
going to another tracer will keep tracing_enabled enabled. Same
is true with disabling tracing_enabled.
This patch will now provide a fast start/stop method to the users
for enabling or disabling tracing.
Note: There were two methods to the struct tracer that were never
used: The methods start and stop. These were to be used as a hook
to the reading of the trace output, but ended up not being
necessary. These two methods are now used to enable the start
and stop of each tracer, in case the tracer needs to do more than
just not write into the buffer. For example, the irqsoff tracer
must stop recording max latencies when tracing is stopped.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 04:05:44 +07:00
|
|
|
}
|
|
|
|
|
2009-01-16 08:40:23 +07:00
|
|
|
static void
|
|
|
|
function_trace_call_preempt_only(unsigned long ip, unsigned long parent_ip)
|
|
|
|
{
|
|
|
|
struct trace_array *tr = func_trace;
|
|
|
|
struct trace_array_cpu *data;
|
|
|
|
unsigned long flags;
|
|
|
|
long disabled;
|
2010-06-03 20:36:50 +07:00
|
|
|
int cpu;
|
2009-01-16 08:40:23 +07:00
|
|
|
int pc;
|
|
|
|
|
|
|
|
if (unlikely(!ftrace_function_enabled))
|
|
|
|
return;
|
|
|
|
|
|
|
|
pc = preempt_count();
|
2010-06-03 20:36:50 +07:00
|
|
|
preempt_disable_notrace();
|
2009-01-16 08:40:23 +07:00
|
|
|
local_save_flags(flags);
|
|
|
|
cpu = raw_smp_processor_id();
|
|
|
|
data = tr->data[cpu];
|
|
|
|
disabled = atomic_inc_return(&data->disabled);
|
|
|
|
|
|
|
|
if (likely(disabled == 1))
|
2009-02-05 13:13:37 +07:00
|
|
|
trace_function(tr, ip, parent_ip, flags, pc);
|
2009-01-16 08:40:23 +07:00
|
|
|
|
|
|
|
atomic_dec(&data->disabled);
|
2010-06-03 20:36:50 +07:00
|
|
|
preempt_enable_notrace();
|
2009-01-16 08:40:23 +07:00
|
|
|
}
|
|
|
|
|
2012-07-10 07:10:42 +07:00
|
|
|
/* Our two options */
|
|
|
|
enum {
|
|
|
|
TRACE_FUNC_OPT_STACK = 0x1,
|
|
|
|
TRACE_FUNC_OPT_PSTORE = 0x2,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct tracer_flags func_flags;
|
|
|
|
|
2009-01-16 08:40:23 +07:00
|
|
|
static void
|
|
|
|
function_trace_call(unsigned long ip, unsigned long parent_ip)
|
|
|
|
{
|
|
|
|
struct trace_array *tr = func_trace;
|
|
|
|
struct trace_array_cpu *data;
|
|
|
|
unsigned long flags;
|
|
|
|
long disabled;
|
|
|
|
int cpu;
|
|
|
|
int pc;
|
|
|
|
|
|
|
|
if (unlikely(!ftrace_function_enabled))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Need to use raw, since this must be called before the
|
|
|
|
* recursive protection is performed.
|
|
|
|
*/
|
|
|
|
local_irq_save(flags);
|
|
|
|
cpu = raw_smp_processor_id();
|
|
|
|
data = tr->data[cpu];
|
|
|
|
disabled = atomic_inc_return(&data->disabled);
|
|
|
|
|
|
|
|
if (likely(disabled == 1)) {
|
2012-07-10 07:10:42 +07:00
|
|
|
/*
|
|
|
|
* So far tracing doesn't support multiple buffers, so
|
|
|
|
* we make an explicit call for now.
|
|
|
|
*/
|
|
|
|
if (unlikely(func_flags.val & TRACE_FUNC_OPT_PSTORE))
|
|
|
|
pstore_ftrace_call(ip, parent_ip);
|
2009-01-16 08:40:23 +07:00
|
|
|
pc = preempt_count();
|
2009-02-05 13:13:37 +07:00
|
|
|
trace_function(tr, ip, parent_ip, flags, pc);
|
2009-01-16 08:40:23 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
atomic_dec(&data->disabled);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
2009-01-16 07:12:40 +07:00
|
|
|
static void
|
|
|
|
function_stack_trace_call(unsigned long ip, unsigned long parent_ip)
|
|
|
|
{
|
|
|
|
struct trace_array *tr = func_trace;
|
|
|
|
struct trace_array_cpu *data;
|
|
|
|
unsigned long flags;
|
|
|
|
long disabled;
|
|
|
|
int cpu;
|
|
|
|
int pc;
|
|
|
|
|
|
|
|
if (unlikely(!ftrace_function_enabled))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Need to use raw, since this must be called before the
|
|
|
|
* recursive protection is performed.
|
|
|
|
*/
|
|
|
|
local_irq_save(flags);
|
|
|
|
cpu = raw_smp_processor_id();
|
|
|
|
data = tr->data[cpu];
|
|
|
|
disabled = atomic_inc_return(&data->disabled);
|
|
|
|
|
|
|
|
if (likely(disabled == 1)) {
|
|
|
|
pc = preempt_count();
|
2009-02-05 13:13:37 +07:00
|
|
|
trace_function(tr, ip, parent_ip, flags, pc);
|
2009-01-16 07:12:40 +07:00
|
|
|
/*
|
|
|
|
* skip over 5 funcs:
|
|
|
|
* __ftrace_trace_stack,
|
|
|
|
* __trace_stack,
|
|
|
|
* function_stack_trace_call
|
|
|
|
* ftrace_list_func
|
|
|
|
* ftrace_call
|
|
|
|
*/
|
2009-02-05 13:13:37 +07:00
|
|
|
__trace_stack(tr, flags, 5, pc);
|
2009-01-16 07:12:40 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
atomic_dec(&data->disabled);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
2009-01-16 08:40:23 +07:00
|
|
|
|
|
|
|
static struct ftrace_ops trace_ops __read_mostly =
|
|
|
|
{
|
|
|
|
.func = function_trace_call,
|
2011-05-04 20:27:52 +07:00
|
|
|
.flags = FTRACE_OPS_FL_GLOBAL,
|
2009-01-16 08:40:23 +07:00
|
|
|
};
|
|
|
|
|
2009-01-16 07:12:40 +07:00
|
|
|
static struct ftrace_ops trace_stack_ops __read_mostly =
|
|
|
|
{
|
|
|
|
.func = function_stack_trace_call,
|
2011-05-04 20:27:52 +07:00
|
|
|
.flags = FTRACE_OPS_FL_GLOBAL,
|
2009-01-16 07:12:40 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct tracer_opt func_opts[] = {
|
|
|
|
#ifdef CONFIG_STACKTRACE
|
|
|
|
{ TRACER_OPT(func_stack_trace, TRACE_FUNC_OPT_STACK) },
|
2012-07-10 07:10:42 +07:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_PSTORE_FTRACE
|
|
|
|
{ TRACER_OPT(func_pstore, TRACE_FUNC_OPT_PSTORE) },
|
2009-01-16 07:12:40 +07:00
|
|
|
#endif
|
|
|
|
{ } /* Always set a last empty entry */
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct tracer_flags func_flags = {
|
|
|
|
.val = 0, /* By default: all flags disabled */
|
|
|
|
.opts = func_opts
|
|
|
|
};
|
|
|
|
|
2009-01-16 11:06:03 +07:00
|
|
|
static void tracing_start_function_trace(void)
|
2009-01-16 10:21:43 +07:00
|
|
|
{
|
|
|
|
ftrace_function_enabled = 0;
|
|
|
|
|
|
|
|
if (trace_flags & TRACE_ITER_PREEMPTONLY)
|
|
|
|
trace_ops.func = function_trace_call_preempt_only;
|
|
|
|
else
|
|
|
|
trace_ops.func = function_trace_call;
|
|
|
|
|
|
|
|
if (func_flags.val & TRACE_FUNC_OPT_STACK)
|
|
|
|
register_ftrace_function(&trace_stack_ops);
|
|
|
|
else
|
|
|
|
register_ftrace_function(&trace_ops);
|
|
|
|
|
|
|
|
ftrace_function_enabled = 1;
|
|
|
|
}
|
|
|
|
|
2009-01-16 11:06:03 +07:00
|
|
|
static void tracing_stop_function_trace(void)
|
2009-01-16 10:21:43 +07:00
|
|
|
{
|
|
|
|
ftrace_function_enabled = 0;
|
tracing/urgent: fix unbalanced ftrace_start_up
Perfcounter reports the following stats for a wide system
profiling:
#
# (2364 samples)
#
# Overhead Symbol
# ........ ......
#
15.40% [k] mwait_idle_with_hints
8.29% [k] read_hpet
5.75% [k] ftrace_caller
3.60% [k] ftrace_call
[...]
This snapshot has been taken while neither the function tracer nor
the function graph tracer was running.
With dynamic ftrace, such results show a wrong ftrace behaviour
because all calls to ftrace_caller or ftrace_graph_caller (the patched
calls to mcount) are supposed to be patched into nop if none of those
tracers are running.
The problem occurs after the first run of the function tracer. Once we
launch it a second time, the callsites will never be nopped back,
unless you set custom filters.
For example it happens during the self tests at boot time.
The function tracer selftest runs, and then the dynamic tracing is
tested too. After that, the callsites are left un-nopped.
This is because the reset callback of the function tracer tries to
unregister two ftrace callbacks in once: the common function tracer
and the function tracer with stack backtrace, regardless of which
one is currently in use.
It then creates an unbalance on ftrace_start_up value which is expected
to be zero when the last ftrace callback is unregistered. When it
reaches zero, the FTRACE_DISABLE_CALLS is set on the next ftrace
command, triggering the patching into nop. But since it becomes
unbalanced, ie becomes lower than zero, if the kernel functions
are patched again (as in every further function tracer runs), they
won't ever be nopped back.
Note that ftrace_call and ftrace_graph_call are still patched back
to ftrace_stub in the off case, but not the callers of ftrace_call
and ftrace_graph_caller. It means that the tracing is well deactivated
but we waste a useless call into every kernel function.
This patch just unregisters the right ftrace_ops for the function
tracer on its reset callback and ignores the other one which is
not registered, fixing the unbalance. The problem also happens
is .30
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
2009-06-20 10:45:14 +07:00
|
|
|
|
|
|
|
if (func_flags.val & TRACE_FUNC_OPT_STACK)
|
|
|
|
unregister_ftrace_function(&trace_stack_ops);
|
|
|
|
else
|
|
|
|
unregister_ftrace_function(&trace_ops);
|
2009-01-16 10:21:43 +07:00
|
|
|
}
|
|
|
|
|
2009-01-16 07:12:40 +07:00
|
|
|
static int func_set_flag(u32 old_flags, u32 bit, int set)
|
|
|
|
{
|
2012-07-10 07:10:46 +07:00
|
|
|
switch (bit) {
|
|
|
|
case TRACE_FUNC_OPT_STACK:
|
2009-01-16 07:12:40 +07:00
|
|
|
/* do nothing if already set */
|
|
|
|
if (!!set == !!(func_flags.val & TRACE_FUNC_OPT_STACK))
|
2012-07-10 07:10:46 +07:00
|
|
|
break;
|
2009-01-16 07:12:40 +07:00
|
|
|
|
2009-01-16 10:21:43 +07:00
|
|
|
if (set) {
|
|
|
|
unregister_ftrace_function(&trace_ops);
|
2009-01-16 07:12:40 +07:00
|
|
|
register_ftrace_function(&trace_stack_ops);
|
2009-01-16 10:21:43 +07:00
|
|
|
} else {
|
2009-01-16 07:12:40 +07:00
|
|
|
unregister_ftrace_function(&trace_stack_ops);
|
2009-01-16 10:21:43 +07:00
|
|
|
register_ftrace_function(&trace_ops);
|
|
|
|
}
|
2009-01-16 07:12:40 +07:00
|
|
|
|
2012-07-10 07:10:46 +07:00
|
|
|
break;
|
|
|
|
case TRACE_FUNC_OPT_PSTORE:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
2009-01-16 07:12:40 +07:00
|
|
|
}
|
|
|
|
|
2012-07-10 07:10:46 +07:00
|
|
|
return 0;
|
2009-01-16 07:12:40 +07:00
|
|
|
}
|
|
|
|
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
static struct tracer function_trace __read_mostly =
|
|
|
|
{
|
2009-01-16 10:21:43 +07:00
|
|
|
.name = "function",
|
|
|
|
.init = function_trace_init,
|
|
|
|
.reset = function_trace_reset,
|
|
|
|
.start = function_trace_start,
|
2009-02-11 08:25:00 +07:00
|
|
|
.wait_pipe = poll_wait_pipe,
|
2009-01-16 07:12:40 +07:00
|
|
|
.flags = &func_flags,
|
|
|
|
.set_flag = func_set_flag,
|
2008-05-13 02:20:44 +07:00
|
|
|
#ifdef CONFIG_FTRACE_SELFTEST
|
2009-01-16 10:21:43 +07:00
|
|
|
.selftest = trace_selftest_startup_function,
|
2008-05-13 02:20:44 +07:00
|
|
|
#endif
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
};
|
|
|
|
|
2009-02-15 07:04:24 +07:00
|
|
|
#ifdef CONFIG_DYNAMIC_FTRACE
|
|
|
|
static void
|
|
|
|
ftrace_traceon(unsigned long ip, unsigned long parent_ip, void **data)
|
|
|
|
{
|
|
|
|
long *count = (long *)data;
|
|
|
|
|
|
|
|
if (tracing_is_on())
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (!*count)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (*count != -1)
|
|
|
|
(*count)--;
|
|
|
|
|
|
|
|
tracing_on();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ftrace_traceoff(unsigned long ip, unsigned long parent_ip, void **data)
|
|
|
|
{
|
|
|
|
long *count = (long *)data;
|
|
|
|
|
|
|
|
if (!tracing_is_on())
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (!*count)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (*count != -1)
|
|
|
|
(*count)--;
|
|
|
|
|
|
|
|
tracing_off();
|
|
|
|
}
|
|
|
|
|
2009-02-17 11:38:13 +07:00
|
|
|
static int
|
|
|
|
ftrace_trace_onoff_print(struct seq_file *m, unsigned long ip,
|
2009-02-18 00:32:04 +07:00
|
|
|
struct ftrace_probe_ops *ops, void *data);
|
2009-02-17 11:38:13 +07:00
|
|
|
|
2009-02-18 00:32:04 +07:00
|
|
|
static struct ftrace_probe_ops traceon_probe_ops = {
|
2009-02-15 07:04:24 +07:00
|
|
|
.func = ftrace_traceon,
|
2009-02-17 11:38:13 +07:00
|
|
|
.print = ftrace_trace_onoff_print,
|
2009-02-15 07:04:24 +07:00
|
|
|
};
|
|
|
|
|
2009-02-18 00:32:04 +07:00
|
|
|
static struct ftrace_probe_ops traceoff_probe_ops = {
|
2009-02-15 07:04:24 +07:00
|
|
|
.func = ftrace_traceoff,
|
2009-02-17 11:38:13 +07:00
|
|
|
.print = ftrace_trace_onoff_print,
|
2009-02-15 07:04:24 +07:00
|
|
|
};
|
|
|
|
|
2009-02-17 11:38:13 +07:00
|
|
|
static int
|
|
|
|
ftrace_trace_onoff_print(struct seq_file *m, unsigned long ip,
|
2009-02-18 00:32:04 +07:00
|
|
|
struct ftrace_probe_ops *ops, void *data)
|
2009-02-17 11:38:13 +07:00
|
|
|
{
|
|
|
|
long count = (long)data;
|
|
|
|
|
2009-09-17 11:05:58 +07:00
|
|
|
seq_printf(m, "%ps:", (void *)ip);
|
2009-02-17 11:38:13 +07:00
|
|
|
|
2009-02-18 00:32:04 +07:00
|
|
|
if (ops == &traceon_probe_ops)
|
2009-02-17 11:38:13 +07:00
|
|
|
seq_printf(m, "traceon");
|
|
|
|
else
|
|
|
|
seq_printf(m, "traceoff");
|
|
|
|
|
2009-02-18 01:12:12 +07:00
|
|
|
if (count == -1)
|
|
|
|
seq_printf(m, ":unlimited\n");
|
|
|
|
else
|
2009-06-25 13:05:27 +07:00
|
|
|
seq_printf(m, ":count=%ld\n", count);
|
2009-02-17 11:38:13 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-02-15 07:04:24 +07:00
|
|
|
static int
|
|
|
|
ftrace_trace_onoff_unreg(char *glob, char *cmd, char *param)
|
|
|
|
{
|
2009-02-18 00:32:04 +07:00
|
|
|
struct ftrace_probe_ops *ops;
|
2009-02-15 07:04:24 +07:00
|
|
|
|
|
|
|
/* we register both traceon and traceoff to this callback */
|
|
|
|
if (strcmp(cmd, "traceon") == 0)
|
2009-02-18 00:32:04 +07:00
|
|
|
ops = &traceon_probe_ops;
|
2009-02-15 07:04:24 +07:00
|
|
|
else
|
2009-02-18 00:32:04 +07:00
|
|
|
ops = &traceoff_probe_ops;
|
2009-02-15 07:04:24 +07:00
|
|
|
|
2009-02-18 00:32:04 +07:00
|
|
|
unregister_ftrace_function_probe_func(glob, ops);
|
2009-02-15 07:04:24 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2011-07-07 22:09:22 +07:00
|
|
|
ftrace_trace_onoff_callback(struct ftrace_hash *hash,
|
|
|
|
char *glob, char *cmd, char *param, int enable)
|
2009-02-15 07:04:24 +07:00
|
|
|
{
|
2009-02-18 00:32:04 +07:00
|
|
|
struct ftrace_probe_ops *ops;
|
2009-02-15 07:04:24 +07:00
|
|
|
void *count = (void *)-1;
|
|
|
|
char *number;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* hash funcs only work with set_ftrace_filter */
|
|
|
|
if (!enable)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (glob[0] == '!')
|
|
|
|
return ftrace_trace_onoff_unreg(glob+1, cmd, param);
|
|
|
|
|
|
|
|
/* we register both traceon and traceoff to this callback */
|
|
|
|
if (strcmp(cmd, "traceon") == 0)
|
2009-02-18 00:32:04 +07:00
|
|
|
ops = &traceon_probe_ops;
|
2009-02-15 07:04:24 +07:00
|
|
|
else
|
2009-02-18 00:32:04 +07:00
|
|
|
ops = &traceoff_probe_ops;
|
2009-02-15 07:04:24 +07:00
|
|
|
|
|
|
|
if (!param)
|
|
|
|
goto out_reg;
|
|
|
|
|
|
|
|
number = strsep(¶m, ":");
|
|
|
|
|
|
|
|
if (!strlen(number))
|
|
|
|
goto out_reg;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We use the callback data field (which is a pointer)
|
|
|
|
* as our counter.
|
|
|
|
*/
|
|
|
|
ret = strict_strtoul(number, 0, (unsigned long *)&count);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
out_reg:
|
2009-02-18 00:32:04 +07:00
|
|
|
ret = register_ftrace_function_probe(glob, ops, count);
|
2009-02-15 07:04:24 +07:00
|
|
|
|
2009-07-15 11:29:06 +07:00
|
|
|
return ret < 0 ? ret : 0;
|
2009-02-15 07:04:24 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct ftrace_func_command ftrace_traceon_cmd = {
|
|
|
|
.name = "traceon",
|
|
|
|
.func = ftrace_trace_onoff_callback,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ftrace_func_command ftrace_traceoff_cmd = {
|
|
|
|
.name = "traceoff",
|
|
|
|
.func = ftrace_trace_onoff_callback,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init init_func_cmd_traceon(void)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = register_ftrace_command(&ftrace_traceoff_cmd);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = register_ftrace_command(&ftrace_traceon_cmd);
|
|
|
|
if (ret)
|
|
|
|
unregister_ftrace_command(&ftrace_traceoff_cmd);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline int init_func_cmd_traceon(void)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_DYNAMIC_FTRACE */
|
|
|
|
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
static __init int init_function_trace(void)
|
|
|
|
{
|
2009-02-15 07:04:24 +07:00
|
|
|
init_func_cmd_traceon();
|
ftrace: function tracer
This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.
Updates:
available_tracers
"function" is added to this file.
current_tracer
To enable the function tracer:
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
The output of the function_trace file is as follows
"echo noverbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
Or with verbose turned on:
"echo verbose > /debugfs/tracing/iter_ctrl"
preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
-----------------
| task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
The "trace" file is not affected by the verbose mode, but is by the symonly.
echo "nosymonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
echo "symonly" > /debugfs/tracing/iter_ctrl
tracer:
[ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
return register_tracer(&function_trace);
|
|
|
|
}
|
|
|
|
device_initcall(init_function_trace);
|
2009-02-15 07:04:24 +07:00
|
|
|
|