linux_dsm_epyc7002/drivers/clk/meson/meson8b.c

1175 lines
32 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* Copyright (c) 2016 BayLibre, Inc.
* Michael Turquette <mturquette@baylibre.com>
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#include "clkc.h"
#include "meson8b.h"
#include "clk-regmap.h"
static DEFINE_SPINLOCK(meson_clk_lock);
struct meson8b_clk_reset {
struct reset_controller_dev reset;
void __iomem *base;
};
static const struct pll_params_table sys_pll_params_table[] = {
PLL_PARAMS(50, 1),
PLL_PARAMS(51, 1),
PLL_PARAMS(52, 1),
PLL_PARAMS(53, 1),
PLL_PARAMS(54, 1),
PLL_PARAMS(55, 1),
PLL_PARAMS(56, 1),
PLL_PARAMS(57, 1),
PLL_PARAMS(58, 1),
PLL_PARAMS(59, 1),
PLL_PARAMS(60, 1),
PLL_PARAMS(61, 1),
PLL_PARAMS(62, 1),
PLL_PARAMS(63, 1),
PLL_PARAMS(64, 1),
{ /* sentinel */ },
};
static struct clk_fixed_rate meson8b_xtal = {
.fixed_rate = 24000000,
.hw.init = &(struct clk_init_data){
.name = "xtal",
.num_parents = 0,
.ops = &clk_fixed_rate_ops,
},
};
static struct clk_regmap meson8b_fixed_pll_dco = {
.data = &(struct meson_clk_pll_data){
.en = {
.reg_off = HHI_MPLL_CNTL,
.shift = 30,
.width = 1,
},
.m = {
.reg_off = HHI_MPLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = HHI_MPLL_CNTL,
.shift = 9,
.width = 5,
},
.frac = {
.reg_off = HHI_MPLL_CNTL2,
.shift = 0,
.width = 12,
},
.l = {
.reg_off = HHI_MPLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = HHI_MPLL_CNTL,
.shift = 29,
.width = 1,
},
},
.hw.init = &(struct clk_init_data){
.name = "fixed_pll_dco",
.ops = &meson_clk_pll_ro_ops,
.parent_names = (const char *[]){ "xtal" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_fixed_pll = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MPLL_CNTL,
.shift = 16,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &clk_regmap_divider_ro_ops,
.parent_names = (const char *[]){ "fixed_pll_dco" },
.num_parents = 1,
/*
* This clock won't ever change at runtime so
* CLK_SET_RATE_PARENT is not required
*/
},
};
static struct clk_regmap meson8b_vid_pll_dco = {
.data = &(struct meson_clk_pll_data){
.en = {
.reg_off = HHI_VID_PLL_CNTL,
.shift = 30,
.width = 1,
},
.m = {
.reg_off = HHI_VID_PLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = HHI_VID_PLL_CNTL,
.shift = 9,
.width = 5,
},
.l = {
.reg_off = HHI_VID_PLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = HHI_VID_PLL_CNTL,
.shift = 29,
.width = 1,
},
},
.hw.init = &(struct clk_init_data){
.name = "vid_pll_dco",
.ops = &meson_clk_pll_ro_ops,
.parent_names = (const char *[]){ "xtal" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_vid_pll = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_VID_PLL_CNTL,
.shift = 16,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "vid_pll",
.ops = &clk_regmap_divider_ro_ops,
.parent_names = (const char *[]){ "vid_pll_dco" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_sys_pll_dco = {
.data = &(struct meson_clk_pll_data){
.en = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 30,
.width = 1,
},
.m = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 9,
.width = 5,
},
.l = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 29,
.width = 1,
},
.table = sys_pll_params_table,
},
.hw.init = &(struct clk_init_data){
.name = "sys_pll_dco",
.ops = &meson_clk_pll_ro_ops,
.parent_names = (const char *[]){ "xtal" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_sys_pll = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_SYS_PLL_CNTL,
.shift = 16,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &clk_regmap_divider_ro_ops,
.parent_names = (const char *[]){ "sys_pll_dco" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_fixed_factor meson8b_fclk_div2_div = {
.mult = 1,
.div = 2,
.hw.init = &(struct clk_init_data){
.name = "fclk_div2_div",
.ops = &clk_fixed_factor_ops,
.parent_names = (const char *[]){ "fixed_pll" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_fclk_div2 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 27,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div2",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div2_div" },
.num_parents = 1,
/*
* FIXME: Ethernet with a RGMII PHYs is not working if
* fclk_div2 is disabled. it is currently unclear why this
* is. keep it enabled until the Ethernet driver knows how
* to manage this clock.
*/
.flags = CLK_IS_CRITICAL,
},
};
static struct clk_fixed_factor meson8b_fclk_div3_div = {
.mult = 1,
.div = 3,
.hw.init = &(struct clk_init_data){
.name = "fclk_div3_div",
.ops = &clk_fixed_factor_ops,
.parent_names = (const char *[]){ "fixed_pll" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_fclk_div3 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 28,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div3",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
},
};
static struct clk_fixed_factor meson8b_fclk_div4_div = {
.mult = 1,
.div = 4,
.hw.init = &(struct clk_init_data){
.name = "fclk_div4_div",
.ops = &clk_fixed_factor_ops,
.parent_names = (const char *[]){ "fixed_pll" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_fclk_div4 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 29,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div4",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div4_div" },
.num_parents = 1,
},
};
static struct clk_fixed_factor meson8b_fclk_div5_div = {
.mult = 1,
.div = 5,
.hw.init = &(struct clk_init_data){
.name = "fclk_div5_div",
.ops = &clk_fixed_factor_ops,
.parent_names = (const char *[]){ "fixed_pll" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_fclk_div5 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 30,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div5",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div5_div" },
.num_parents = 1,
},
};
static struct clk_fixed_factor meson8b_fclk_div7_div = {
.mult = 1,
.div = 7,
.hw.init = &(struct clk_init_data){
.name = "fclk_div7_div",
.ops = &clk_fixed_factor_ops,
.parent_names = (const char *[]){ "fixed_pll" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_fclk_div7 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 31,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div7",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div7_div" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_mpll_prediv = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MPLL_CNTL5,
.shift = 12,
.width = 1,
},
.hw.init = &(struct clk_init_data){
.name = "mpll_prediv",
.ops = &clk_regmap_divider_ro_ops,
.parent_names = (const char *[]){ "fixed_pll" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_mpll0_div = {
.data = &(struct meson_clk_mpll_data){
.sdm = {
.reg_off = HHI_MPLL_CNTL7,
.shift = 0,
.width = 14,
},
.sdm_en = {
.reg_off = HHI_MPLL_CNTL7,
.shift = 15,
.width = 1,
},
.n2 = {
.reg_off = HHI_MPLL_CNTL7,
.shift = 16,
.width = 9,
},
.ssen = {
.reg_off = HHI_MPLL_CNTL,
.shift = 25,
.width = 1,
},
.lock = &meson_clk_lock,
},
.hw.init = &(struct clk_init_data){
.name = "mpll0_div",
.ops = &meson_clk_mpll_ops,
.parent_names = (const char *[]){ "mpll_prediv" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_mpll0 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL7,
.bit_idx = 14,
},
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "mpll0_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_mpll1_div = {
.data = &(struct meson_clk_mpll_data){
.sdm = {
.reg_off = HHI_MPLL_CNTL8,
.shift = 0,
.width = 14,
},
.sdm_en = {
.reg_off = HHI_MPLL_CNTL8,
.shift = 15,
.width = 1,
},
.n2 = {
.reg_off = HHI_MPLL_CNTL8,
.shift = 16,
.width = 9,
},
.lock = &meson_clk_lock,
},
.hw.init = &(struct clk_init_data){
.name = "mpll1_div",
.ops = &meson_clk_mpll_ops,
.parent_names = (const char *[]){ "mpll_prediv" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_mpll1 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL8,
.bit_idx = 14,
},
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "mpll1_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_mpll2_div = {
.data = &(struct meson_clk_mpll_data){
.sdm = {
.reg_off = HHI_MPLL_CNTL9,
.shift = 0,
.width = 14,
},
.sdm_en = {
.reg_off = HHI_MPLL_CNTL9,
.shift = 15,
.width = 1,
},
.n2 = {
.reg_off = HHI_MPLL_CNTL9,
.shift = 16,
.width = 9,
},
.lock = &meson_clk_lock,
},
.hw.init = &(struct clk_init_data){
.name = "mpll2_div",
.ops = &meson_clk_mpll_ops,
.parent_names = (const char *[]){ "mpll_prediv" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_mpll2 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL9,
.bit_idx = 14,
},
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "mpll2_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static u32 mux_table_clk81[] = { 6, 5, 7 };
static struct clk_regmap meson8b_mpeg_clk_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_MPEG_CLK_CNTL,
.mask = 0x7,
.shift = 12,
.table = mux_table_clk81,
},
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
.ops = &clk_regmap_mux_ro_ops,
/*
* FIXME bits 14:12 selects from 8 possible parents:
* xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
* fclk_div4, fclk_div3, fclk_div5
*/
.parent_names = (const char *[]){ "fclk_div3", "fclk_div4",
"fclk_div5" },
.num_parents = 3,
},
};
static struct clk_regmap meson8b_mpeg_clk_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
},
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
.ops = &clk_regmap_divider_ro_ops,
.parent_names = (const char *[]){ "mpeg_clk_sel" },
.num_parents = 1,
},
};
static struct clk_regmap meson8b_clk81 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
},
.hw.init = &(struct clk_init_data){
.name = "clk81",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "mpeg_clk_div" },
.num_parents = 1,
.flags = CLK_IS_CRITICAL,
},
};
static struct clk_regmap meson8b_cpu_in_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_SYS_CPU_CLK_CNTL0,
.mask = 0x1,
.shift = 0,
},
.hw.init = &(struct clk_init_data){
.name = "cpu_in_sel",
.ops = &clk_regmap_mux_ro_ops,
.parent_names = (const char *[]){ "xtal", "sys_pll" },
.num_parents = 2,
.flags = (CLK_SET_RATE_PARENT |
CLK_SET_RATE_NO_REPARENT),
},
};
static struct clk_fixed_factor meson8b_cpu_div2 = {
.mult = 1,
.div = 2,
.hw.init = &(struct clk_init_data){
.name = "cpu_div2",
.ops = &clk_fixed_factor_ops,
.parent_names = (const char *[]){ "cpu_in_sel" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_fixed_factor meson8b_cpu_div3 = {
.mult = 1,
.div = 3,
.hw.init = &(struct clk_init_data){
.name = "cpu_div3",
.ops = &clk_fixed_factor_ops,
.parent_names = (const char *[]){ "cpu_in_sel" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static const struct clk_div_table cpu_scale_table[] = {
{ .val = 2, .div = 4 },
{ .val = 3, .div = 6 },
{ .val = 4, .div = 8 },
{ .val = 5, .div = 10 },
{ .val = 6, .div = 12 },
{ .val = 7, .div = 14 },
{ .val = 8, .div = 16 },
{ /* sentinel */ },
};
static struct clk_regmap meson8b_cpu_scale_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_SYS_CPU_CLK_CNTL1,
.shift = 20,
.width = 9,
.table = cpu_scale_table,
.flags = CLK_DIVIDER_ALLOW_ZERO,
},
.hw.init = &(struct clk_init_data){
.name = "cpu_scale_div",
.ops = &clk_regmap_divider_ro_ops,
.parent_names = (const char *[]){ "cpu_in_sel" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_cpu_scale_out_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_SYS_CPU_CLK_CNTL0,
.mask = 0x3,
.shift = 2,
},
.hw.init = &(struct clk_init_data){
.name = "cpu_scale_out_sel",
.ops = &clk_regmap_mux_ro_ops,
.parent_names = (const char *[]) { "cpu_in_sel",
"cpu_div2",
"cpu_div3",
"cpu_scale_div" },
.num_parents = 4,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_cpu_clk = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_SYS_CPU_CLK_CNTL0,
.mask = 0x1,
.shift = 7,
},
.hw.init = &(struct clk_init_data){
.name = "cpu_clk",
.ops = &clk_regmap_mux_ro_ops,
.parent_names = (const char *[]){ "xtal",
"cpu_scale_out_sel" },
.num_parents = 2,
.flags = (CLK_SET_RATE_PARENT |
CLK_SET_RATE_NO_REPARENT),
},
};
clk: meson: meson8b: add support for the NAND clocks This adds the NAND clocks (from the HHI_NAND_CLK_CNTL register) to the Meson8b clock driver. There are three NAND clocks: a gate which enables or disables the NAND clock, a mux and a divider (which divides the mux output). Unfortunately the public S805 datasheet does not document the mux parents. However, the vendor kernel has a few hints for us which allows us to make an educated guess about the clock parents. To do this we need to have a look at set_nand_core_clk() from the vendor's NAND driver (see [0]): - XTAL = (4<<9) | (1<<8) | 0 - 160MHz = (0<<9) | (1<<8) | 3) - 182MHz = (3<<9) | (1<<8) | 1) - 212MHz = (1<<9) | (1<<8) | 3) - 255MHz = (2<<9) | (1<<8) | 1) While there is a comment for the XTAL parent (which indicates that it should only be used for debugging) we have to do a bit of math for the other parents: target_freq * divider = rate of parent clock Bit 8 above is the enable bit, so we can ignore it here. Bits 11:9 are the mux index and bits 6:0 are the 0-based divider (so we need to add 1). This gives us: - mux 0 (160MHz * 4) = fclk_div4 (actual rate = 637.5MHz, off by 2.5MHz) - mux 1 (212MHz * 4) = fclk_div3 (actual rate = 850MHz, off by 2MHz) - mux 2 (255MHz * 2) = fclk_div5 (matches exactly 510MHz) - mux 3 (182MHz * 2) = fclk_div7 (actual rate = 346.3MHz, off by 0.3MHz) [0] https://github.com/khadas/linux/blob/9587681285cb/drivers/amlogic/amlnf/dev/amlnf_ctrl.c#L314 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-04-24 02:35:09 +07:00
static struct clk_regmap meson8b_nand_clk_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_NAND_CLK_CNTL,
.mask = 0x7,
.shift = 9,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "nand_clk_sel",
.ops = &clk_regmap_mux_ops,
/* FIXME all other parents are unknown: */
.parent_names = (const char *[]){ "fclk_div4", "fclk_div3",
"fclk_div5", "fclk_div7", "xtal" },
.num_parents = 5,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_nand_clk_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_NAND_CLK_CNTL,
.shift = 0,
.width = 7,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "nand_clk_div",
.ops = &clk_regmap_divider_ops,
.parent_names = (const char *[]){ "nand_clk_sel" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_nand_clk_gate = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_NAND_CLK_CNTL,
.bit_idx = 8,
},
.hw.init = &(struct clk_init_data){
.name = "nand_clk_gate",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "nand_clk_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
/* Everything Else (EE) domain gates */
static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
static MESON_GATE(meson8b_dos, HHI_GCLK_MPEG0, 1);
static MESON_GATE(meson8b_isa, HHI_GCLK_MPEG0, 5);
static MESON_GATE(meson8b_pl301, HHI_GCLK_MPEG0, 6);
static MESON_GATE(meson8b_periphs, HHI_GCLK_MPEG0, 7);
static MESON_GATE(meson8b_spicc, HHI_GCLK_MPEG0, 8);
static MESON_GATE(meson8b_i2c, HHI_GCLK_MPEG0, 9);
static MESON_GATE(meson8b_sar_adc, HHI_GCLK_MPEG0, 10);
static MESON_GATE(meson8b_smart_card, HHI_GCLK_MPEG0, 11);
static MESON_GATE(meson8b_rng0, HHI_GCLK_MPEG0, 12);
static MESON_GATE(meson8b_uart0, HHI_GCLK_MPEG0, 13);
static MESON_GATE(meson8b_sdhc, HHI_GCLK_MPEG0, 14);
static MESON_GATE(meson8b_stream, HHI_GCLK_MPEG0, 15);
static MESON_GATE(meson8b_async_fifo, HHI_GCLK_MPEG0, 16);
static MESON_GATE(meson8b_sdio, HHI_GCLK_MPEG0, 17);
static MESON_GATE(meson8b_abuf, HHI_GCLK_MPEG0, 18);
static MESON_GATE(meson8b_hiu_iface, HHI_GCLK_MPEG0, 19);
static MESON_GATE(meson8b_assist_misc, HHI_GCLK_MPEG0, 23);
static MESON_GATE(meson8b_spi, HHI_GCLK_MPEG0, 30);
static MESON_GATE(meson8b_i2s_spdif, HHI_GCLK_MPEG1, 2);
static MESON_GATE(meson8b_eth, HHI_GCLK_MPEG1, 3);
static MESON_GATE(meson8b_demux, HHI_GCLK_MPEG1, 4);
static MESON_GATE(meson8b_aiu_glue, HHI_GCLK_MPEG1, 6);
static MESON_GATE(meson8b_iec958, HHI_GCLK_MPEG1, 7);
static MESON_GATE(meson8b_i2s_out, HHI_GCLK_MPEG1, 8);
static MESON_GATE(meson8b_amclk, HHI_GCLK_MPEG1, 9);
static MESON_GATE(meson8b_aififo2, HHI_GCLK_MPEG1, 10);
static MESON_GATE(meson8b_mixer, HHI_GCLK_MPEG1, 11);
static MESON_GATE(meson8b_mixer_iface, HHI_GCLK_MPEG1, 12);
static MESON_GATE(meson8b_adc, HHI_GCLK_MPEG1, 13);
static MESON_GATE(meson8b_blkmv, HHI_GCLK_MPEG1, 14);
static MESON_GATE(meson8b_aiu, HHI_GCLK_MPEG1, 15);
static MESON_GATE(meson8b_uart1, HHI_GCLK_MPEG1, 16);
static MESON_GATE(meson8b_g2d, HHI_GCLK_MPEG1, 20);
static MESON_GATE(meson8b_usb0, HHI_GCLK_MPEG1, 21);
static MESON_GATE(meson8b_usb1, HHI_GCLK_MPEG1, 22);
static MESON_GATE(meson8b_reset, HHI_GCLK_MPEG1, 23);
static MESON_GATE(meson8b_nand, HHI_GCLK_MPEG1, 24);
static MESON_GATE(meson8b_dos_parser, HHI_GCLK_MPEG1, 25);
static MESON_GATE(meson8b_usb, HHI_GCLK_MPEG1, 26);
static MESON_GATE(meson8b_vdin1, HHI_GCLK_MPEG1, 28);
static MESON_GATE(meson8b_ahb_arb0, HHI_GCLK_MPEG1, 29);
static MESON_GATE(meson8b_efuse, HHI_GCLK_MPEG1, 30);
static MESON_GATE(meson8b_boot_rom, HHI_GCLK_MPEG1, 31);
static MESON_GATE(meson8b_ahb_data_bus, HHI_GCLK_MPEG2, 1);
static MESON_GATE(meson8b_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
static MESON_GATE(meson8b_hdmi_intr_sync, HHI_GCLK_MPEG2, 3);
static MESON_GATE(meson8b_hdmi_pclk, HHI_GCLK_MPEG2, 4);
static MESON_GATE(meson8b_usb1_ddr_bridge, HHI_GCLK_MPEG2, 8);
static MESON_GATE(meson8b_usb0_ddr_bridge, HHI_GCLK_MPEG2, 9);
static MESON_GATE(meson8b_mmc_pclk, HHI_GCLK_MPEG2, 11);
static MESON_GATE(meson8b_dvin, HHI_GCLK_MPEG2, 12);
static MESON_GATE(meson8b_uart2, HHI_GCLK_MPEG2, 15);
static MESON_GATE(meson8b_sana, HHI_GCLK_MPEG2, 22);
static MESON_GATE(meson8b_vpu_intr, HHI_GCLK_MPEG2, 25);
static MESON_GATE(meson8b_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
static MESON_GATE(meson8b_clk81_a9, HHI_GCLK_MPEG2, 29);
static MESON_GATE(meson8b_vclk2_venci0, HHI_GCLK_OTHER, 1);
static MESON_GATE(meson8b_vclk2_venci1, HHI_GCLK_OTHER, 2);
static MESON_GATE(meson8b_vclk2_vencp0, HHI_GCLK_OTHER, 3);
static MESON_GATE(meson8b_vclk2_vencp1, HHI_GCLK_OTHER, 4);
static MESON_GATE(meson8b_gclk_venci_int, HHI_GCLK_OTHER, 8);
static MESON_GATE(meson8b_gclk_vencp_int, HHI_GCLK_OTHER, 9);
static MESON_GATE(meson8b_dac_clk, HHI_GCLK_OTHER, 10);
static MESON_GATE(meson8b_aoclk_gate, HHI_GCLK_OTHER, 14);
static MESON_GATE(meson8b_iec958_gate, HHI_GCLK_OTHER, 16);
static MESON_GATE(meson8b_enc480p, HHI_GCLK_OTHER, 20);
static MESON_GATE(meson8b_rng1, HHI_GCLK_OTHER, 21);
static MESON_GATE(meson8b_gclk_vencl_int, HHI_GCLK_OTHER, 22);
static MESON_GATE(meson8b_vclk2_venclmcc, HHI_GCLK_OTHER, 24);
static MESON_GATE(meson8b_vclk2_vencl, HHI_GCLK_OTHER, 25);
static MESON_GATE(meson8b_vclk2_other, HHI_GCLK_OTHER, 26);
static MESON_GATE(meson8b_edp, HHI_GCLK_OTHER, 31);
/* Always On (AO) domain gates */
static MESON_GATE(meson8b_ao_media_cpu, HHI_GCLK_AO, 0);
static MESON_GATE(meson8b_ao_ahb_sram, HHI_GCLK_AO, 1);
static MESON_GATE(meson8b_ao_ahb_bus, HHI_GCLK_AO, 2);
static MESON_GATE(meson8b_ao_iface, HHI_GCLK_AO, 3);
static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
.hws = {
[CLKID_XTAL] = &meson8b_xtal.hw,
[CLKID_PLL_FIXED] = &meson8b_fixed_pll.hw,
[CLKID_PLL_VID] = &meson8b_vid_pll.hw,
[CLKID_PLL_SYS] = &meson8b_sys_pll.hw,
[CLKID_FCLK_DIV2] = &meson8b_fclk_div2.hw,
[CLKID_FCLK_DIV3] = &meson8b_fclk_div3.hw,
[CLKID_FCLK_DIV4] = &meson8b_fclk_div4.hw,
[CLKID_FCLK_DIV5] = &meson8b_fclk_div5.hw,
[CLKID_FCLK_DIV7] = &meson8b_fclk_div7.hw,
[CLKID_CPUCLK] = &meson8b_cpu_clk.hw,
[CLKID_MPEG_SEL] = &meson8b_mpeg_clk_sel.hw,
[CLKID_MPEG_DIV] = &meson8b_mpeg_clk_div.hw,
[CLKID_CLK81] = &meson8b_clk81.hw,
[CLKID_DDR] = &meson8b_ddr.hw,
[CLKID_DOS] = &meson8b_dos.hw,
[CLKID_ISA] = &meson8b_isa.hw,
[CLKID_PL301] = &meson8b_pl301.hw,
[CLKID_PERIPHS] = &meson8b_periphs.hw,
[CLKID_SPICC] = &meson8b_spicc.hw,
[CLKID_I2C] = &meson8b_i2c.hw,
[CLKID_SAR_ADC] = &meson8b_sar_adc.hw,
[CLKID_SMART_CARD] = &meson8b_smart_card.hw,
[CLKID_RNG0] = &meson8b_rng0.hw,
[CLKID_UART0] = &meson8b_uart0.hw,
[CLKID_SDHC] = &meson8b_sdhc.hw,
[CLKID_STREAM] = &meson8b_stream.hw,
[CLKID_ASYNC_FIFO] = &meson8b_async_fifo.hw,
[CLKID_SDIO] = &meson8b_sdio.hw,
[CLKID_ABUF] = &meson8b_abuf.hw,
[CLKID_HIU_IFACE] = &meson8b_hiu_iface.hw,
[CLKID_ASSIST_MISC] = &meson8b_assist_misc.hw,
[CLKID_SPI] = &meson8b_spi.hw,
[CLKID_I2S_SPDIF] = &meson8b_i2s_spdif.hw,
[CLKID_ETH] = &meson8b_eth.hw,
[CLKID_DEMUX] = &meson8b_demux.hw,
[CLKID_AIU_GLUE] = &meson8b_aiu_glue.hw,
[CLKID_IEC958] = &meson8b_iec958.hw,
[CLKID_I2S_OUT] = &meson8b_i2s_out.hw,
[CLKID_AMCLK] = &meson8b_amclk.hw,
[CLKID_AIFIFO2] = &meson8b_aififo2.hw,
[CLKID_MIXER] = &meson8b_mixer.hw,
[CLKID_MIXER_IFACE] = &meson8b_mixer_iface.hw,
[CLKID_ADC] = &meson8b_adc.hw,
[CLKID_BLKMV] = &meson8b_blkmv.hw,
[CLKID_AIU] = &meson8b_aiu.hw,
[CLKID_UART1] = &meson8b_uart1.hw,
[CLKID_G2D] = &meson8b_g2d.hw,
[CLKID_USB0] = &meson8b_usb0.hw,
[CLKID_USB1] = &meson8b_usb1.hw,
[CLKID_RESET] = &meson8b_reset.hw,
[CLKID_NAND] = &meson8b_nand.hw,
[CLKID_DOS_PARSER] = &meson8b_dos_parser.hw,
[CLKID_USB] = &meson8b_usb.hw,
[CLKID_VDIN1] = &meson8b_vdin1.hw,
[CLKID_AHB_ARB0] = &meson8b_ahb_arb0.hw,
[CLKID_EFUSE] = &meson8b_efuse.hw,
[CLKID_BOOT_ROM] = &meson8b_boot_rom.hw,
[CLKID_AHB_DATA_BUS] = &meson8b_ahb_data_bus.hw,
[CLKID_AHB_CTRL_BUS] = &meson8b_ahb_ctrl_bus.hw,
[CLKID_HDMI_INTR_SYNC] = &meson8b_hdmi_intr_sync.hw,
[CLKID_HDMI_PCLK] = &meson8b_hdmi_pclk.hw,
[CLKID_USB1_DDR_BRIDGE] = &meson8b_usb1_ddr_bridge.hw,
[CLKID_USB0_DDR_BRIDGE] = &meson8b_usb0_ddr_bridge.hw,
[CLKID_MMC_PCLK] = &meson8b_mmc_pclk.hw,
[CLKID_DVIN] = &meson8b_dvin.hw,
[CLKID_UART2] = &meson8b_uart2.hw,
[CLKID_SANA] = &meson8b_sana.hw,
[CLKID_VPU_INTR] = &meson8b_vpu_intr.hw,
[CLKID_SEC_AHB_AHB3_BRIDGE] = &meson8b_sec_ahb_ahb3_bridge.hw,
[CLKID_CLK81_A9] = &meson8b_clk81_a9.hw,
[CLKID_VCLK2_VENCI0] = &meson8b_vclk2_venci0.hw,
[CLKID_VCLK2_VENCI1] = &meson8b_vclk2_venci1.hw,
[CLKID_VCLK2_VENCP0] = &meson8b_vclk2_vencp0.hw,
[CLKID_VCLK2_VENCP1] = &meson8b_vclk2_vencp1.hw,
[CLKID_GCLK_VENCI_INT] = &meson8b_gclk_venci_int.hw,
[CLKID_GCLK_VENCP_INT] = &meson8b_gclk_vencp_int.hw,
[CLKID_DAC_CLK] = &meson8b_dac_clk.hw,
[CLKID_AOCLK_GATE] = &meson8b_aoclk_gate.hw,
[CLKID_IEC958_GATE] = &meson8b_iec958_gate.hw,
[CLKID_ENC480P] = &meson8b_enc480p.hw,
[CLKID_RNG1] = &meson8b_rng1.hw,
[CLKID_GCLK_VENCL_INT] = &meson8b_gclk_vencl_int.hw,
[CLKID_VCLK2_VENCLMCC] = &meson8b_vclk2_venclmcc.hw,
[CLKID_VCLK2_VENCL] = &meson8b_vclk2_vencl.hw,
[CLKID_VCLK2_OTHER] = &meson8b_vclk2_other.hw,
[CLKID_EDP] = &meson8b_edp.hw,
[CLKID_AO_MEDIA_CPU] = &meson8b_ao_media_cpu.hw,
[CLKID_AO_AHB_SRAM] = &meson8b_ao_ahb_sram.hw,
[CLKID_AO_AHB_BUS] = &meson8b_ao_ahb_bus.hw,
[CLKID_AO_IFACE] = &meson8b_ao_iface.hw,
[CLKID_MPLL0] = &meson8b_mpll0.hw,
[CLKID_MPLL1] = &meson8b_mpll1.hw,
[CLKID_MPLL2] = &meson8b_mpll2.hw,
[CLKID_MPLL0_DIV] = &meson8b_mpll0_div.hw,
[CLKID_MPLL1_DIV] = &meson8b_mpll1_div.hw,
[CLKID_MPLL2_DIV] = &meson8b_mpll2_div.hw,
[CLKID_CPU_IN_SEL] = &meson8b_cpu_in_sel.hw,
[CLKID_CPU_DIV2] = &meson8b_cpu_div2.hw,
[CLKID_CPU_DIV3] = &meson8b_cpu_div3.hw,
[CLKID_CPU_SCALE_DIV] = &meson8b_cpu_scale_div.hw,
[CLKID_CPU_SCALE_OUT_SEL] = &meson8b_cpu_scale_out_sel.hw,
[CLKID_MPLL_PREDIV] = &meson8b_mpll_prediv.hw,
[CLKID_FCLK_DIV2_DIV] = &meson8b_fclk_div2_div.hw,
[CLKID_FCLK_DIV3_DIV] = &meson8b_fclk_div3_div.hw,
[CLKID_FCLK_DIV4_DIV] = &meson8b_fclk_div4_div.hw,
[CLKID_FCLK_DIV5_DIV] = &meson8b_fclk_div5_div.hw,
[CLKID_FCLK_DIV7_DIV] = &meson8b_fclk_div7_div.hw,
clk: meson: meson8b: add support for the NAND clocks This adds the NAND clocks (from the HHI_NAND_CLK_CNTL register) to the Meson8b clock driver. There are three NAND clocks: a gate which enables or disables the NAND clock, a mux and a divider (which divides the mux output). Unfortunately the public S805 datasheet does not document the mux parents. However, the vendor kernel has a few hints for us which allows us to make an educated guess about the clock parents. To do this we need to have a look at set_nand_core_clk() from the vendor's NAND driver (see [0]): - XTAL = (4<<9) | (1<<8) | 0 - 160MHz = (0<<9) | (1<<8) | 3) - 182MHz = (3<<9) | (1<<8) | 1) - 212MHz = (1<<9) | (1<<8) | 3) - 255MHz = (2<<9) | (1<<8) | 1) While there is a comment for the XTAL parent (which indicates that it should only be used for debugging) we have to do a bit of math for the other parents: target_freq * divider = rate of parent clock Bit 8 above is the enable bit, so we can ignore it here. Bits 11:9 are the mux index and bits 6:0 are the 0-based divider (so we need to add 1). This gives us: - mux 0 (160MHz * 4) = fclk_div4 (actual rate = 637.5MHz, off by 2.5MHz) - mux 1 (212MHz * 4) = fclk_div3 (actual rate = 850MHz, off by 2MHz) - mux 2 (255MHz * 2) = fclk_div5 (matches exactly 510MHz) - mux 3 (182MHz * 2) = fclk_div7 (actual rate = 346.3MHz, off by 0.3MHz) [0] https://github.com/khadas/linux/blob/9587681285cb/drivers/amlogic/amlnf/dev/amlnf_ctrl.c#L314 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-04-24 02:35:09 +07:00
[CLKID_NAND_SEL] = &meson8b_nand_clk_sel.hw,
[CLKID_NAND_DIV] = &meson8b_nand_clk_div.hw,
[CLKID_NAND_CLK] = &meson8b_nand_clk_gate.hw,
[CLKID_PLL_FIXED_DCO] = &meson8b_fixed_pll_dco.hw,
[CLKID_PLL_VID_DCO] = &meson8b_vid_pll_dco.hw,
[CLKID_PLL_SYS_DCO] = &meson8b_sys_pll_dco.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
};
static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_clk81,
&meson8b_ddr,
&meson8b_dos,
&meson8b_isa,
&meson8b_pl301,
&meson8b_periphs,
&meson8b_spicc,
&meson8b_i2c,
&meson8b_sar_adc,
&meson8b_smart_card,
&meson8b_rng0,
&meson8b_uart0,
&meson8b_sdhc,
&meson8b_stream,
&meson8b_async_fifo,
&meson8b_sdio,
&meson8b_abuf,
&meson8b_hiu_iface,
&meson8b_assist_misc,
&meson8b_spi,
&meson8b_i2s_spdif,
&meson8b_eth,
&meson8b_demux,
&meson8b_aiu_glue,
&meson8b_iec958,
&meson8b_i2s_out,
&meson8b_amclk,
&meson8b_aififo2,
&meson8b_mixer,
&meson8b_mixer_iface,
&meson8b_adc,
&meson8b_blkmv,
&meson8b_aiu,
&meson8b_uart1,
&meson8b_g2d,
&meson8b_usb0,
&meson8b_usb1,
&meson8b_reset,
&meson8b_nand,
&meson8b_dos_parser,
&meson8b_usb,
&meson8b_vdin1,
&meson8b_ahb_arb0,
&meson8b_efuse,
&meson8b_boot_rom,
&meson8b_ahb_data_bus,
&meson8b_ahb_ctrl_bus,
&meson8b_hdmi_intr_sync,
&meson8b_hdmi_pclk,
&meson8b_usb1_ddr_bridge,
&meson8b_usb0_ddr_bridge,
&meson8b_mmc_pclk,
&meson8b_dvin,
&meson8b_uart2,
&meson8b_sana,
&meson8b_vpu_intr,
&meson8b_sec_ahb_ahb3_bridge,
&meson8b_clk81_a9,
&meson8b_vclk2_venci0,
&meson8b_vclk2_venci1,
&meson8b_vclk2_vencp0,
&meson8b_vclk2_vencp1,
&meson8b_gclk_venci_int,
&meson8b_gclk_vencp_int,
&meson8b_dac_clk,
&meson8b_aoclk_gate,
&meson8b_iec958_gate,
&meson8b_enc480p,
&meson8b_rng1,
&meson8b_gclk_vencl_int,
&meson8b_vclk2_venclmcc,
&meson8b_vclk2_vencl,
&meson8b_vclk2_other,
&meson8b_edp,
&meson8b_ao_media_cpu,
&meson8b_ao_ahb_sram,
&meson8b_ao_ahb_bus,
&meson8b_ao_iface,
&meson8b_mpeg_clk_div,
&meson8b_mpeg_clk_sel,
&meson8b_mpll0,
&meson8b_mpll1,
&meson8b_mpll2,
&meson8b_mpll0_div,
&meson8b_mpll1_div,
&meson8b_mpll2_div,
&meson8b_fixed_pll,
&meson8b_vid_pll,
&meson8b_sys_pll,
&meson8b_cpu_in_sel,
&meson8b_cpu_scale_div,
&meson8b_cpu_scale_out_sel,
&meson8b_cpu_clk,
&meson8b_mpll_prediv,
&meson8b_fclk_div2,
&meson8b_fclk_div3,
&meson8b_fclk_div4,
&meson8b_fclk_div5,
&meson8b_fclk_div7,
clk: meson: meson8b: add support for the NAND clocks This adds the NAND clocks (from the HHI_NAND_CLK_CNTL register) to the Meson8b clock driver. There are three NAND clocks: a gate which enables or disables the NAND clock, a mux and a divider (which divides the mux output). Unfortunately the public S805 datasheet does not document the mux parents. However, the vendor kernel has a few hints for us which allows us to make an educated guess about the clock parents. To do this we need to have a look at set_nand_core_clk() from the vendor's NAND driver (see [0]): - XTAL = (4<<9) | (1<<8) | 0 - 160MHz = (0<<9) | (1<<8) | 3) - 182MHz = (3<<9) | (1<<8) | 1) - 212MHz = (1<<9) | (1<<8) | 3) - 255MHz = (2<<9) | (1<<8) | 1) While there is a comment for the XTAL parent (which indicates that it should only be used for debugging) we have to do a bit of math for the other parents: target_freq * divider = rate of parent clock Bit 8 above is the enable bit, so we can ignore it here. Bits 11:9 are the mux index and bits 6:0 are the 0-based divider (so we need to add 1). This gives us: - mux 0 (160MHz * 4) = fclk_div4 (actual rate = 637.5MHz, off by 2.5MHz) - mux 1 (212MHz * 4) = fclk_div3 (actual rate = 850MHz, off by 2MHz) - mux 2 (255MHz * 2) = fclk_div5 (matches exactly 510MHz) - mux 3 (182MHz * 2) = fclk_div7 (actual rate = 346.3MHz, off by 0.3MHz) [0] https://github.com/khadas/linux/blob/9587681285cb/drivers/amlogic/amlnf/dev/amlnf_ctrl.c#L314 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-04-24 02:35:09 +07:00
&meson8b_nand_clk_sel,
&meson8b_nand_clk_div,
&meson8b_nand_clk_gate,
&meson8b_fixed_pll_dco,
&meson8b_vid_pll_dco,
&meson8b_sys_pll_dco,
};
static const struct meson8b_clk_reset_line {
u32 reg;
u8 bit_idx;
} meson8b_clk_reset_bits[] = {
[CLKC_RESET_L2_CACHE_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 30
},
[CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 29
},
[CLKC_RESET_SCU_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 28
},
[CLKC_RESET_CPU3_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 27
},
[CLKC_RESET_CPU2_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 26
},
[CLKC_RESET_CPU1_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 25
},
[CLKC_RESET_CPU0_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 24
},
[CLKC_RESET_A5_GLOBAL_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 18
},
[CLKC_RESET_A5_AXI_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 17
},
[CLKC_RESET_A5_ABP_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 16
},
[CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET] = {
.reg = HHI_SYS_CPU_CLK_CNTL1, .bit_idx = 30
},
[CLKC_RESET_VID_CLK_CNTL_SOFT_RESET] = {
.reg = HHI_VID_CLK_CNTL, .bit_idx = 15
},
[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST] = {
.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 7
},
[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE] = {
.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 3
},
[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST] = {
.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 1
},
[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE] = {
.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 0
},
};
static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
struct meson8b_clk_reset *meson8b_clk_reset =
container_of(rcdev, struct meson8b_clk_reset, reset);
unsigned long flags;
const struct meson8b_clk_reset_line *reset;
u32 val;
if (id >= ARRAY_SIZE(meson8b_clk_reset_bits))
return -EINVAL;
reset = &meson8b_clk_reset_bits[id];
spin_lock_irqsave(&meson_clk_lock, flags);
val = readl(meson8b_clk_reset->base + reset->reg);
if (assert)
val |= BIT(reset->bit_idx);
else
val &= ~BIT(reset->bit_idx);
writel(val, meson8b_clk_reset->base + reset->reg);
spin_unlock_irqrestore(&meson_clk_lock, flags);
return 0;
}
static int meson8b_clk_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
return meson8b_clk_reset_update(rcdev, id, true);
}
static int meson8b_clk_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
return meson8b_clk_reset_update(rcdev, id, false);
}
static const struct reset_control_ops meson8b_clk_reset_ops = {
.assert = meson8b_clk_reset_assert,
.deassert = meson8b_clk_reset_deassert,
};
static const struct regmap_config clkc_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
static void __init meson8b_clkc_init(struct device_node *np)
{
struct meson8b_clk_reset *rstc;
void __iomem *clk_base;
struct regmap *map;
int i, ret;
/* Generic clocks, PLLs and some of the reset-bits */
clk_base = of_iomap(np, 1);
if (!clk_base) {
pr_err("%s: Unable to map clk base\n", __func__);
return;
}
map = regmap_init_mmio(NULL, clk_base, &clkc_regmap_config);
if (IS_ERR(map))
return;
rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
if (!rstc)
return;
/* Reset Controller */
rstc->base = clk_base;
rstc->reset.ops = &meson8b_clk_reset_ops;
rstc->reset.nr_resets = ARRAY_SIZE(meson8b_clk_reset_bits);
rstc->reset.of_node = np;
ret = reset_controller_register(&rstc->reset);
if (ret) {
pr_err("%s: Failed to register clkc reset controller: %d\n",
__func__, ret);
return;
}
/* Populate regmap for the regmap backed clocks */
for (i = 0; i < ARRAY_SIZE(meson8b_clk_regmaps); i++)
meson8b_clk_regmaps[i]->map = map;
/*
* register all clks
* CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
*/
for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
/* array might be sparse */
if (!meson8b_hw_onecell_data.hws[i])
continue;
ret = clk_hw_register(NULL, meson8b_hw_onecell_data.hws[i]);
if (ret)
return;
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
&meson8b_hw_onecell_data);
if (ret)
pr_err("%s: failed to register clock provider\n", __func__);
}
CLK_OF_DECLARE_DRIVER(meson8_clkc, "amlogic,meson8-clkc",
meson8b_clkc_init);
CLK_OF_DECLARE_DRIVER(meson8b_clkc, "amlogic,meson8b-clkc",
meson8b_clkc_init);
CLK_OF_DECLARE_DRIVER(meson8m2_clkc, "amlogic,meson8m2-clkc",
meson8b_clkc_init);