linux_dsm_epyc7002/arch/x86/include/asm/microcode.h

91 lines
2.2 KiB
C
Raw Normal View History

#ifndef _ASM_X86_MICROCODE_H
#define _ASM_X86_MICROCODE_H
#define native_rdmsr(msr, val1, val2) \
do { \
u64 __val = native_read_msr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
#define native_wrmsr(msr, low, high) \
native_write_msr(msr, low, high)
#define native_wrmsrl(msr, val) \
native_write_msr((msr), \
(u32)((u64)(val)), \
(u32)((u64)(val) >> 32))
struct cpu_signature {
unsigned int sig;
unsigned int pf;
unsigned int rev;
};
struct device;
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND };
extern bool dis_ucode_ldr;
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
struct microcode_ops {
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
enum ucode_state (*request_microcode_user) (int cpu,
const void __user *buf, size_t size);
enum ucode_state (*request_microcode_fw) (int cpu, struct device *,
bool refresh_fw);
void (*microcode_fini_cpu) (int cpu);
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
/*
* The generic 'microcode_core' part guarantees that
* the callbacks below run on a target cpu when they
* are being called.
* See also the "Synchronization" section in microcode_core.c.
*/
int (*apply_microcode) (int cpu);
int (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
};
struct ucode_cpu_info {
x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Peter Oruba <peter.oruba@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines)
2009-05-12 04:48:27 +07:00
struct cpu_signature cpu_sig;
int valid;
void *mc;
};
extern struct ucode_cpu_info ucode_cpu_info[];
#ifdef CONFIG_MICROCODE_INTEL
extern struct microcode_ops * __init init_intel_microcode(void);
#else
static inline struct microcode_ops * __init init_intel_microcode(void)
{
return NULL;
}
#endif /* CONFIG_MICROCODE_INTEL */
#ifdef CONFIG_MICROCODE_AMD
extern struct microcode_ops * __init init_amd_microcode(void);
extern void __exit exit_amd_microcode(void);
#else
static inline struct microcode_ops * __init init_amd_microcode(void)
{
return NULL;
}
static inline void __exit exit_amd_microcode(void) {}
#endif
#ifdef CONFIG_MICROCODE_EARLY
#define MAX_UCODE_COUNT 128
extern void __init load_ucode_bsp(void);
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 05:23:59 +07:00
extern void load_ucode_ap(void);
extern int __init save_microcode_in_initrd(void);
#else
static inline void __init load_ucode_bsp(void) {}
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 05:23:59 +07:00
static inline void load_ucode_ap(void) {}
static inline int __init save_microcode_in_initrd(void)
{
return 0;
}
#endif
#endif /* _ASM_X86_MICROCODE_H */