linux_dsm_epyc7002/drivers/net/dsa/Makefile

obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_BCM_SF2)	+= bcm_sf2.o
obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o

obj-y				+= b53/
obj-y				+= mv88e6xxx/
dsa: Move switch drivers to new directory drivers/net/dsa Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2011-11-28 00:08:33 +07:00			`obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o`
net: dsa: add Broadcom SF2 switch driver Add support for the Broadcom Starfigther 2 switch chip using a DSA driver. This switch driver supports the following features: - configuration of the external switch port interface: MII, RevMII, RGMII and RGMII_NO_ID are supported - support for the per-port MIB counters - support for link interrupts for special ports (e.g: MoCA) - powering up/down of switch memories to conserve power when ports are unused Finally, update the compatible property for the DSA core code to match our switch top-level compatible node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-08-28 07:04:56 +07:00			`obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o`
net-next: dsa: add new driver for qca8xxx family This patch contains initial support for the QCA8337 switch. It will detect a QCA8337 switch, if present and declared in the DT. Each port will be represented through a standalone net_device interface, as for other DSA switches. CPU can communicate with any of the ports by setting an IP@ on ethN interface. Most of the extra callbacks of the DSA subsystem are already supported, such as bridge offloading, stp, fdb. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-09-15 21:26:41 +07:00			`obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o`
net: dsa: b53: Add support for Broadcom RoboSwitch This patch adds support for Broadcom's BCM53xx switch family, also known as RoboSwitch. Some of these switches are ubiquituous, found in home routers, Wi-Fi routers, DSL and cable modem gateways and other networking related products. This drivers adds the library driver (b53_common.c) as well as a few bus glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx). Basic operations are supported to bring the Layer 1/2 up and running, but not much more at this point, subsequent patches add the remaining features. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-06-10 08:23:53 +07:00
			`obj-y += b53/`
net: dsa: mv88e6xxx: move driver in its own folder With the upcoming support for cross-chip operations and other mv88e6xxx enhancements, new files will be added. Similarly to mlxsw or b53, move mv88e6xxx files into their own folder. In the meantime, update the MAINTAINERS entry to please checkpatch.pl, by replacing the invalid 88E6352 entry with 88E6XXX, maintained by Andrew and myself. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-06-21 23:28:19 +07:00			`obj-y += mv88e6xxx/`