linux_dsm_epyc7002/include/net/fib_rules.h

203 lines
5.3 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __NET_FIB_RULES_H
#define __NET_FIB_RULES_H
#include <linux/types.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/fib_rules.h>
#include <linux/refcount.h>
#include <net/flow.h>
#include <net/rtnetlink.h>
#include <net/fib_notifier.h>
struct fib_kuid_range {
kuid_t start;
kuid_t end;
};
struct fib_rule {
struct list_head list;
int iifindex;
int oifindex;
u32 mark;
u32 mark_mask;
u32 flags;
u32 table;
u8 action;
net: Add l3mdev rule Currently, VRFs require 1 oif and 1 iif rule per address family per VRF. As the number of VRF devices increases it brings scalability issues with the increasing rule list. All of the VRF rules have the same format with the exception of the specific table id to direct the lookup. Since the table id is available from the oif or iif in the loopup, the VRF rules can be consolidated to a single rule that pulls the table from the VRF device. This patch introduces a new rule attribute l3mdev. The l3mdev rule means the table id used for the lookup is pulled from the L3 master device (e.g., VRF) rather than being statically defined. With the l3mdev rule all of the basic VRF FIB rules are reduced to 1 l3mdev rule per address family (IPv4 and IPv6). If an admin wishes to insert higher priority rules for specific VRFs those rules will co-exist with the l3mdev rule. This capability means current VRF scripts will co-exist with this new simpler implementation. Currently, the rules list for both ipv4 and ipv6 look like this: $ ip ru ls 1000: from all oif vrf1 lookup 1001 1000: from all iif vrf1 lookup 1001 1000: from all oif vrf2 lookup 1002 1000: from all iif vrf2 lookup 1002 1000: from all oif vrf3 lookup 1003 1000: from all iif vrf3 lookup 1003 1000: from all oif vrf4 lookup 1004 1000: from all iif vrf4 lookup 1004 1000: from all oif vrf5 lookup 1005 1000: from all iif vrf5 lookup 1005 1000: from all oif vrf6 lookup 1006 1000: from all iif vrf6 lookup 1006 1000: from all oif vrf7 lookup 1007 1000: from all iif vrf7 lookup 1007 1000: from all oif vrf8 lookup 1008 1000: from all iif vrf8 lookup 1008 ... 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default With the l3mdev rule the list is just the following regardless of the number of VRFs: $ ip ru ls 1000: from all lookup [l3mdev table] 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default (Note: the above pretty print of the rule is based on an iproute2 prototype. Actual verbage may change) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 00:55:39 +07:00
u8 l3mdev;
u8 proto;
u8 ip_proto;
u32 target;
__be64 tun_id;
struct fib_rule __rcu *ctarget;
struct net *fr_net;
refcount_t refcnt;
u32 pref;
int suppress_ifgroup;
int suppress_prefixlen;
char iifname[IFNAMSIZ];
char oifname[IFNAMSIZ];
struct fib_kuid_range uid_range;
struct fib_rule_port_range sport_range;
struct fib_rule_port_range dport_range;
struct rcu_head rcu;
};
struct fib_lookup_arg {
void *lookup_ptr;
const void *lookup_data;
void *result;
struct fib_rule *rule;
net: Add l3mdev rule Currently, VRFs require 1 oif and 1 iif rule per address family per VRF. As the number of VRF devices increases it brings scalability issues with the increasing rule list. All of the VRF rules have the same format with the exception of the specific table id to direct the lookup. Since the table id is available from the oif or iif in the loopup, the VRF rules can be consolidated to a single rule that pulls the table from the VRF device. This patch introduces a new rule attribute l3mdev. The l3mdev rule means the table id used for the lookup is pulled from the L3 master device (e.g., VRF) rather than being statically defined. With the l3mdev rule all of the basic VRF FIB rules are reduced to 1 l3mdev rule per address family (IPv4 and IPv6). If an admin wishes to insert higher priority rules for specific VRFs those rules will co-exist with the l3mdev rule. This capability means current VRF scripts will co-exist with this new simpler implementation. Currently, the rules list for both ipv4 and ipv6 look like this: $ ip ru ls 1000: from all oif vrf1 lookup 1001 1000: from all iif vrf1 lookup 1001 1000: from all oif vrf2 lookup 1002 1000: from all iif vrf2 lookup 1002 1000: from all oif vrf3 lookup 1003 1000: from all iif vrf3 lookup 1003 1000: from all oif vrf4 lookup 1004 1000: from all iif vrf4 lookup 1004 1000: from all oif vrf5 lookup 1005 1000: from all iif vrf5 lookup 1005 1000: from all oif vrf6 lookup 1006 1000: from all iif vrf6 lookup 1006 1000: from all oif vrf7 lookup 1007 1000: from all iif vrf7 lookup 1007 1000: from all oif vrf8 lookup 1008 1000: from all iif vrf8 lookup 1008 ... 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default With the l3mdev rule the list is just the following regardless of the number of VRFs: $ ip ru ls 1000: from all lookup [l3mdev table] 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default (Note: the above pretty print of the rule is based on an iproute2 prototype. Actual verbage may change) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 00:55:39 +07:00
u32 table;
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 17:41:36 +07:00
int flags;
net: ipv4 sysctl option to ignore routes when nexthop link is down This feature is only enabled with the new per-interface or ipv4 global sysctls called 'ignore_routes_with_linkdown'. net.ipv4.conf.all.ignore_routes_with_linkdown = 0 net.ipv4.conf.default.ignore_routes_with_linkdown = 0 net.ipv4.conf.lo.ignore_routes_with_linkdown = 0 ... When the above sysctls are set, will report to userspace that a route is dead and will no longer resolve to this nexthop when performing a fib lookup. This will signal to userspace that the route will not be selected. The signalling of a RTNH_F_DEAD is only passed to userspace if the sysctl is enabled and link is down. This was done as without it the netlink listeners would have no idea whether or not a nexthop would be selected. The kernel only sets RTNH_F_DEAD internally if the interface has IFF_UP cleared. With the new sysctl set, the following behavior can be observed (interface p8p1 is link-down): default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 dead linkdown 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 dead linkdown 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 90.0.0.1 via 70.0.0.2 dev p7p1 src 70.0.0.1 cache local 80.0.0.1 dev lo src 80.0.0.1 cache <local> 80.0.0.2 via 10.0.5.2 dev p9p1 src 10.0.5.15 cache While the route does remain in the table (so it can be modified if needed rather than being wiped away as it would be if IFF_UP was cleared), the proper next-hop is chosen automatically when the link is down. Now interface p8p1 is linked-up: default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 192.168.56.0/24 dev p2p1 proto kernel scope link src 192.168.56.2 90.0.0.1 via 80.0.0.2 dev p8p1 src 80.0.0.1 cache local 80.0.0.1 dev lo src 80.0.0.1 cache <local> 80.0.0.2 dev p8p1 src 80.0.0.1 cache and the output changes to what one would expect. If the sysctl is not set, the following output would be expected when p8p1 is down: default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 linkdown 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 linkdown 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 Since the dead flag does not appear, there should be no expectation that the kernel would skip using this route due to link being down. v2: Split kernel changes into 2 patches, this actually makes a behavioral change if the sysctl is set. Also took suggestion from Alex to simplify code by only checking sysctl during fib lookup and suggestion from Scott to add a per-interface sysctl. v3: Code clean-ups to make it more readable and efficient as well as a reverse path check fix. v4: Drop binary sysctl v5: Whitespace fixups from Dave v6: Style changes from Dave and checkpatch suggestions v7: One more checkpatch fixup Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24 00:45:37 +07:00
#define FIB_LOOKUP_NOREF 1
#define FIB_LOOKUP_IGNORE_LINKSTATE 2
};
struct fib_rules_ops {
int family;
struct list_head list;
int rule_size;
int addr_size;
int unresolved_rules;
int nr_goto_rules;
unsigned int fib_rules_seq;
int (*action)(struct fib_rule *,
struct flowi *, int,
struct fib_lookup_arg *);
bool (*suppress)(struct fib_rule *,
struct fib_lookup_arg *);
int (*match)(struct fib_rule *,
struct flowi *, int);
int (*configure)(struct fib_rule *,
struct sk_buff *,
struct fib_rule_hdr *,
struct nlattr **);
int (*delete)(struct fib_rule *);
int (*compare)(struct fib_rule *,
struct fib_rule_hdr *,
struct nlattr **);
int (*fill)(struct fib_rule *, struct sk_buff *,
struct fib_rule_hdr *);
size_t (*nlmsg_payload)(struct fib_rule *);
/* Called after modifications to the rules set, must flush
* the route cache if one exists. */
void (*flush_cache)(struct fib_rules_ops *ops);
int nlgroup;
const struct nla_policy *policy;
struct list_head rules_list;
struct module *owner;
struct net *fro_net;
struct rcu_head rcu;
};
struct fib_rule_notifier_info {
struct fib_notifier_info info; /* must be first */
struct fib_rule *rule;
};
#define FRA_GENERIC_POLICY \
[FRA_IIFNAME] = { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, \
[FRA_OIFNAME] = { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, \
[FRA_PRIORITY] = { .type = NLA_U32 }, \
[FRA_FWMARK] = { .type = NLA_U32 }, \
[FRA_FWMASK] = { .type = NLA_U32 }, \
[FRA_TABLE] = { .type = NLA_U32 }, \
[FRA_SUPPRESS_PREFIXLEN] = { .type = NLA_U32 }, \
[FRA_SUPPRESS_IFGROUP] = { .type = NLA_U32 }, \
net: Add l3mdev rule Currently, VRFs require 1 oif and 1 iif rule per address family per VRF. As the number of VRF devices increases it brings scalability issues with the increasing rule list. All of the VRF rules have the same format with the exception of the specific table id to direct the lookup. Since the table id is available from the oif or iif in the loopup, the VRF rules can be consolidated to a single rule that pulls the table from the VRF device. This patch introduces a new rule attribute l3mdev. The l3mdev rule means the table id used for the lookup is pulled from the L3 master device (e.g., VRF) rather than being statically defined. With the l3mdev rule all of the basic VRF FIB rules are reduced to 1 l3mdev rule per address family (IPv4 and IPv6). If an admin wishes to insert higher priority rules for specific VRFs those rules will co-exist with the l3mdev rule. This capability means current VRF scripts will co-exist with this new simpler implementation. Currently, the rules list for both ipv4 and ipv6 look like this: $ ip ru ls 1000: from all oif vrf1 lookup 1001 1000: from all iif vrf1 lookup 1001 1000: from all oif vrf2 lookup 1002 1000: from all iif vrf2 lookup 1002 1000: from all oif vrf3 lookup 1003 1000: from all iif vrf3 lookup 1003 1000: from all oif vrf4 lookup 1004 1000: from all iif vrf4 lookup 1004 1000: from all oif vrf5 lookup 1005 1000: from all iif vrf5 lookup 1005 1000: from all oif vrf6 lookup 1006 1000: from all iif vrf6 lookup 1006 1000: from all oif vrf7 lookup 1007 1000: from all iif vrf7 lookup 1007 1000: from all oif vrf8 lookup 1008 1000: from all iif vrf8 lookup 1008 ... 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default With the l3mdev rule the list is just the following regardless of the number of VRFs: $ ip ru ls 1000: from all lookup [l3mdev table] 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default (Note: the above pretty print of the rule is based on an iproute2 prototype. Actual verbage may change) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 00:55:39 +07:00
[FRA_GOTO] = { .type = NLA_U32 }, \
[FRA_L3MDEV] = { .type = NLA_U8 }, \
[FRA_UID_RANGE] = { .len = sizeof(struct fib_rule_uid_range) }, \
[FRA_PROTOCOL] = { .type = NLA_U8 }, \
[FRA_IP_PROTO] = { .type = NLA_U8 }, \
[FRA_SPORT_RANGE] = { .len = sizeof(struct fib_rule_port_range) }, \
[FRA_DPORT_RANGE] = { .len = sizeof(struct fib_rule_port_range) }
static inline void fib_rule_get(struct fib_rule *rule)
{
refcount_inc(&rule->refcnt);
}
static inline void fib_rule_put(struct fib_rule *rule)
{
if (refcount_dec_and_test(&rule->refcnt))
kfree_rcu(rule, rcu);
}
net: Add l3mdev rule Currently, VRFs require 1 oif and 1 iif rule per address family per VRF. As the number of VRF devices increases it brings scalability issues with the increasing rule list. All of the VRF rules have the same format with the exception of the specific table id to direct the lookup. Since the table id is available from the oif or iif in the loopup, the VRF rules can be consolidated to a single rule that pulls the table from the VRF device. This patch introduces a new rule attribute l3mdev. The l3mdev rule means the table id used for the lookup is pulled from the L3 master device (e.g., VRF) rather than being statically defined. With the l3mdev rule all of the basic VRF FIB rules are reduced to 1 l3mdev rule per address family (IPv4 and IPv6). If an admin wishes to insert higher priority rules for specific VRFs those rules will co-exist with the l3mdev rule. This capability means current VRF scripts will co-exist with this new simpler implementation. Currently, the rules list for both ipv4 and ipv6 look like this: $ ip ru ls 1000: from all oif vrf1 lookup 1001 1000: from all iif vrf1 lookup 1001 1000: from all oif vrf2 lookup 1002 1000: from all iif vrf2 lookup 1002 1000: from all oif vrf3 lookup 1003 1000: from all iif vrf3 lookup 1003 1000: from all oif vrf4 lookup 1004 1000: from all iif vrf4 lookup 1004 1000: from all oif vrf5 lookup 1005 1000: from all iif vrf5 lookup 1005 1000: from all oif vrf6 lookup 1006 1000: from all iif vrf6 lookup 1006 1000: from all oif vrf7 lookup 1007 1000: from all iif vrf7 lookup 1007 1000: from all oif vrf8 lookup 1008 1000: from all iif vrf8 lookup 1008 ... 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default With the l3mdev rule the list is just the following regardless of the number of VRFs: $ ip ru ls 1000: from all lookup [l3mdev table] 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default (Note: the above pretty print of the rule is based on an iproute2 prototype. Actual verbage may change) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 00:55:39 +07:00
#ifdef CONFIG_NET_L3_MASTER_DEV
static inline u32 fib_rule_get_table(struct fib_rule *rule,
struct fib_lookup_arg *arg)
{
return rule->l3mdev ? arg->table : rule->table;
}
#else
static inline u32 fib_rule_get_table(struct fib_rule *rule,
struct fib_lookup_arg *arg)
{
return rule->table;
}
#endif
static inline u32 frh_get_table(struct fib_rule_hdr *frh, struct nlattr **nla)
{
if (nla[FRA_TABLE])
return nla_get_u32(nla[FRA_TABLE]);
return frh->table;
}
static inline bool fib_rule_port_range_set(const struct fib_rule_port_range *range)
{
return range->start != 0 && range->end != 0;
}
static inline bool fib_rule_port_inrange(const struct fib_rule_port_range *a,
__be16 port)
{
return ntohs(port) >= a->start &&
ntohs(port) <= a->end;
}
static inline bool fib_rule_port_range_valid(const struct fib_rule_port_range *a)
{
return a->start != 0 && a->end != 0 && a->end < 0xffff &&
a->start <= a->end;
}
static inline bool fib_rule_port_range_compare(struct fib_rule_port_range *a,
struct fib_rule_port_range *b)
{
return a->start == b->start &&
a->end == b->end;
}
static inline bool fib_rule_requires_fldissect(struct fib_rule *rule)
{
return rule->ip_proto ||
fib_rule_port_range_set(&rule->sport_range) ||
fib_rule_port_range_set(&rule->dport_range);
}
struct fib_rules_ops *fib_rules_register(const struct fib_rules_ops *,
struct net *);
void fib_rules_unregister(struct fib_rules_ops *);
int fib_rules_lookup(struct fib_rules_ops *, struct flowi *, int flags,
struct fib_lookup_arg *);
int fib_default_rule_add(struct fib_rules_ops *, u32 pref, u32 table,
u32 flags);
ipv4: fib_rules: Check if rule is a default rule Currently, when non-default (custom) FIB rules are used, devices capable of layer 3 offloading flush their tables and let the kernel do the forwarding instead. When these devices' drivers are loaded they register to the FIB notification chain, which lets them know about the existence of any custom FIB rules. This is done by sending a RULE_ADD notification based on the value of 'net->ipv4.fib_has_custom_rules'. This approach is problematic when VRF offload is taken into account, as upon the creation of the first VRF netdev, a l3mdev rule is programmed to direct skbs to the VRF's table. Instead of merely reading the above value and sending a single RULE_ADD notification, we should iterate over all the FIB rules and send a detailed notification for each, thereby allowing offloading drivers to sanitize the rules they don't support and potentially flush their tables. While l3mdev rules are uniquely marked, the default rules are not. Therefore, when they are being notified they might invoke offloading drivers to unnecessarily flush their tables. Solve this by adding an helper to check if a FIB rule is a default rule. Namely, its selector should match all packets and its action should point to the local, main or default tables. As noted by David Ahern, uniquely marking the default rules is insufficient. When using VRFs, it's common to avoid false hits by moving the rule for the local table to just before the main table: Default configuration: $ ip rule show 0: from all lookup local 32766: from all lookup main 32767: from all lookup default Common configuration with VRFs: $ ip rule show 1000: from all lookup [l3mdev-table] 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16 15:08:12 +07:00
bool fib_rule_matchall(const struct fib_rule *rule);
int fib_rules_dump(struct net *net, struct notifier_block *nb, int family);
unsigned int fib_rules_seq_read(struct net *net, int family);
net: Add l3mdev rule Currently, VRFs require 1 oif and 1 iif rule per address family per VRF. As the number of VRF devices increases it brings scalability issues with the increasing rule list. All of the VRF rules have the same format with the exception of the specific table id to direct the lookup. Since the table id is available from the oif or iif in the loopup, the VRF rules can be consolidated to a single rule that pulls the table from the VRF device. This patch introduces a new rule attribute l3mdev. The l3mdev rule means the table id used for the lookup is pulled from the L3 master device (e.g., VRF) rather than being statically defined. With the l3mdev rule all of the basic VRF FIB rules are reduced to 1 l3mdev rule per address family (IPv4 and IPv6). If an admin wishes to insert higher priority rules for specific VRFs those rules will co-exist with the l3mdev rule. This capability means current VRF scripts will co-exist with this new simpler implementation. Currently, the rules list for both ipv4 and ipv6 look like this: $ ip ru ls 1000: from all oif vrf1 lookup 1001 1000: from all iif vrf1 lookup 1001 1000: from all oif vrf2 lookup 1002 1000: from all iif vrf2 lookup 1002 1000: from all oif vrf3 lookup 1003 1000: from all iif vrf3 lookup 1003 1000: from all oif vrf4 lookup 1004 1000: from all iif vrf4 lookup 1004 1000: from all oif vrf5 lookup 1005 1000: from all iif vrf5 lookup 1005 1000: from all oif vrf6 lookup 1006 1000: from all iif vrf6 lookup 1006 1000: from all oif vrf7 lookup 1007 1000: from all iif vrf7 lookup 1007 1000: from all oif vrf8 lookup 1008 1000: from all iif vrf8 lookup 1008 ... 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default With the l3mdev rule the list is just the following regardless of the number of VRFs: $ ip ru ls 1000: from all lookup [l3mdev table] 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default (Note: the above pretty print of the rule is based on an iproute2 prototype. Actual verbage may change) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 00:55:39 +07:00
int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack);
int fib_nl_delrule(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack);
#endif