linux_dsm_epyc7002/fs/ioctl.c

859 lines
21 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/ioctl.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
#include <linux/syscalls.h>
#include <linux/mm.h>
#include <linux/capability.h>
#include <linux/compat.h>
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/security.h>
#include <linux/export.h>
#include <linux/uaccess.h>
#include <linux/writeback.h>
#include <linux/buffer_head.h>
#include <linux/falloc.h>
#include <linux/sched/signal.h>
#include <linux/fiemap.h>
#include "internal.h"
#include <asm/ioctls.h>
/* So that the fiemap access checks can't overflow on 32 bit machines. */
#define FIEMAP_MAX_EXTENTS (UINT_MAX / sizeof(struct fiemap_extent))
/**
* vfs_ioctl - call filesystem specific ioctl methods
* @filp: open file to invoke ioctl method on
* @cmd: ioctl command to execute
* @arg: command-specific argument for ioctl
*
* Invokes filesystem specific ->unlocked_ioctl, if one exists; otherwise
* returns -ENOTTY.
*
* Returns 0 on success, -errno on error.
*/
long vfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
int error = -ENOTTY;
if (!filp->f_op->unlocked_ioctl)
goto out;
error = filp->f_op->unlocked_ioctl(filp, cmd, arg);
if (error == -ENOIOCTLCMD)
error = -ENOTTY;
out:
return error;
}
EXPORT_SYMBOL(vfs_ioctl);
static int ioctl_fibmap(struct file *filp, int __user *p)
{
struct inode *inode = file_inode(filp);
struct super_block *sb = inode->i_sb;
int error, ur_block;
sector_t block;
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
error = get_user(ur_block, p);
if (error)
return error;
if (ur_block < 0)
return -EINVAL;
block = ur_block;
error = bmap(inode, &block);
if (block > INT_MAX) {
error = -ERANGE;
pr_warn_ratelimited("[%s/%d] FS: %s File: %pD4 would truncate fibmap result\n",
current->comm, task_pid_nr(current),
sb->s_id, filp);
}
if (error)
ur_block = 0;
else
ur_block = block;
if (put_user(ur_block, p))
error = -EFAULT;
return error;
}
/**
* fiemap_fill_next_extent - Fiemap helper function
* @fieinfo: Fiemap context passed into ->fiemap
* @logical: Extent logical start offset, in bytes
* @phys: Extent physical start offset, in bytes
* @len: Extent length, in bytes
* @flags: FIEMAP_EXTENT flags that describe this extent
*
* Called from file system ->fiemap callback. Will populate extent
* info as passed in via arguments and copy to user memory. On
* success, extent count on fieinfo is incremented.
*
* Returns 0 on success, -errno on error, 1 if this was the last
* extent that will fit in user array.
*/
#define SET_UNKNOWN_FLAGS (FIEMAP_EXTENT_DELALLOC)
#define SET_NO_UNMOUNTED_IO_FLAGS (FIEMAP_EXTENT_DATA_ENCRYPTED)
#define SET_NOT_ALIGNED_FLAGS (FIEMAP_EXTENT_DATA_TAIL|FIEMAP_EXTENT_DATA_INLINE)
int fiemap_fill_next_extent(struct fiemap_extent_info *fieinfo, u64 logical,
u64 phys, u64 len, u32 flags)
{
struct fiemap_extent extent;
struct fiemap_extent __user *dest = fieinfo->fi_extents_start;
/* only count the extents */
if (fieinfo->fi_extents_max == 0) {
fieinfo->fi_extents_mapped++;
return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0;
}
if (fieinfo->fi_extents_mapped >= fieinfo->fi_extents_max)
return 1;
if (flags & SET_UNKNOWN_FLAGS)
flags |= FIEMAP_EXTENT_UNKNOWN;
if (flags & SET_NO_UNMOUNTED_IO_FLAGS)
flags |= FIEMAP_EXTENT_ENCODED;
if (flags & SET_NOT_ALIGNED_FLAGS)
flags |= FIEMAP_EXTENT_NOT_ALIGNED;
memset(&extent, 0, sizeof(extent));
extent.fe_logical = logical;
extent.fe_physical = phys;
extent.fe_length = len;
extent.fe_flags = flags;
dest += fieinfo->fi_extents_mapped;
if (copy_to_user(dest, &extent, sizeof(extent)))
return -EFAULT;
fieinfo->fi_extents_mapped++;
if (fieinfo->fi_extents_mapped == fieinfo->fi_extents_max)
return 1;
return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0;
}
EXPORT_SYMBOL(fiemap_fill_next_extent);
/**
* fiemap_prep - check validity of requested flags for fiemap
* @inode: Inode to operate on
* @fieinfo: Fiemap context passed into ->fiemap
* @start: Start of the mapped range
* @len: Length of the mapped range, can be truncated by this function.
* @supported_flags: Set of fiemap flags that the file system understands
*
* This function must be called from each ->fiemap instance to validate the
* fiemap request against the file system parameters.
*
* Returns 0 on success, or a negative error on failure.
*/
int fiemap_prep(struct inode *inode, struct fiemap_extent_info *fieinfo,
u64 start, u64 *len, u32 supported_flags)
{
u64 maxbytes = inode->i_sb->s_maxbytes;
u32 incompat_flags;
int ret = 0;
if (*len == 0)
return -EINVAL;
if (start > maxbytes)
return -EFBIG;
/*
* Shrink request scope to what the fs can actually handle.
*/
if (*len > maxbytes || (maxbytes - *len) < start)
*len = maxbytes - start;
supported_flags |= FIEMAP_FLAG_SYNC;
supported_flags &= FIEMAP_FLAGS_COMPAT;
incompat_flags = fieinfo->fi_flags & ~supported_flags;
if (incompat_flags) {
fieinfo->fi_flags = incompat_flags;
return -EBADR;
}
if (fieinfo->fi_flags & FIEMAP_FLAG_SYNC)
ret = filemap_write_and_wait(inode->i_mapping);
return ret;
}
EXPORT_SYMBOL(fiemap_prep);
static int ioctl_fiemap(struct file *filp, struct fiemap __user *ufiemap)
{
struct fiemap fiemap;
struct fiemap_extent_info fieinfo = { 0, };
struct inode *inode = file_inode(filp);
int error;
if (!inode->i_op->fiemap)
return -EOPNOTSUPP;
if (copy_from_user(&fiemap, ufiemap, sizeof(fiemap)))
return -EFAULT;
if (fiemap.fm_extent_count > FIEMAP_MAX_EXTENTS)
return -EINVAL;
fieinfo.fi_flags = fiemap.fm_flags;
fieinfo.fi_extents_max = fiemap.fm_extent_count;
fieinfo.fi_extents_start = ufiemap->fm_extents;
error = inode->i_op->fiemap(inode, &fieinfo, fiemap.fm_start,
fiemap.fm_length);
fiemap.fm_flags = fieinfo.fi_flags;
fiemap.fm_mapped_extents = fieinfo.fi_extents_mapped;
if (copy_to_user(ufiemap, &fiemap, sizeof(fiemap)))
error = -EFAULT;
return error;
}
static long ioctl_file_clone(struct file *dst_file, unsigned long srcfd,
u64 off, u64 olen, u64 destoff)
{
struct fd src_file = fdget(srcfd);
loff_t cloned;
int ret;
if (!src_file.file)
return -EBADF;
ret = -EXDEV;
if (src_file.file->f_path.mnt != dst_file->f_path.mnt)
goto fdput;
cloned = vfs_clone_file_range(src_file.file, off, dst_file, destoff,
olen, 0);
if (cloned < 0)
ret = cloned;
else if (olen && cloned != olen)
ret = -EINVAL;
else
ret = 0;
fdput:
fdput(src_file);
return ret;
}
static long ioctl_file_clone_range(struct file *file,
struct file_clone_range __user *argp)
{
struct file_clone_range args;
if (copy_from_user(&args, argp, sizeof(args)))
return -EFAULT;
return ioctl_file_clone(file, args.src_fd, args.src_offset,
args.src_length, args.dest_offset);
}
#ifdef CONFIG_BLOCK
static inline sector_t logical_to_blk(struct inode *inode, loff_t offset)
{
return (offset >> inode->i_blkbits);
}
static inline loff_t blk_to_logical(struct inode *inode, sector_t blk)
{
return (blk << inode->i_blkbits);
}
/**
* __generic_block_fiemap - FIEMAP for block based inodes (no locking)
* @inode: the inode to map
* @fieinfo: the fiemap info struct that will be passed back to userspace
* @start: where to start mapping in the inode
* @len: how much space to map
* @get_block: the fs's get_block function
*
* This does FIEMAP for block based inodes. Basically it will just loop
* through get_block until we hit the number of extents we want to map, or we
* go past the end of the file and hit a hole.
*
* If it is possible to have data blocks beyond a hole past @inode->i_size, then
* please do not use this function, it will stop at the first unmapped block
* beyond i_size.
*
* If you use this function directly, you need to do your own locking. Use
* generic_block_fiemap if you want the locking done for you.
*/
static int __generic_block_fiemap(struct inode *inode,
struct fiemap_extent_info *fieinfo, loff_t start,
loff_t len, get_block_t *get_block)
{
struct buffer_head map_bh;
sector_t start_blk, last_blk;
loff_t isize = i_size_read(inode);
u64 logical = 0, phys = 0, size = 0;
u32 flags = FIEMAP_EXTENT_MERGED;
bool past_eof = false, whole_file = false;
int ret = 0;
ret = fiemap_prep(inode, fieinfo, start, &len, FIEMAP_FLAG_SYNC);
if (ret)
return ret;
/*
* Either the i_mutex or other appropriate locking needs to be held
* since we expect isize to not change at all through the duration of
* this call.
*/
if (len >= isize) {
whole_file = true;
len = isize;
}
/*
* Some filesystems can't deal with being asked to map less than
* blocksize, so make sure our len is at least block length.
*/
if (logical_to_blk(inode, len) == 0)
len = blk_to_logical(inode, 1);
start_blk = logical_to_blk(inode, start);
last_blk = logical_to_blk(inode, start + len - 1);
do {
/*
* we set b_size to the total size we want so it will map as
* many contiguous blocks as possible at once
*/
memset(&map_bh, 0, sizeof(struct buffer_head));
map_bh.b_size = len;
ret = get_block(inode, start_blk, &map_bh, 0);
if (ret)
break;
/* HOLE */
if (!buffer_mapped(&map_bh)) {
start_blk++;
/*
* We want to handle the case where there is an
* allocated block at the front of the file, and then
* nothing but holes up to the end of the file properly,
* to make sure that extent at the front gets properly
* marked with FIEMAP_EXTENT_LAST
*/
if (!past_eof &&
blk_to_logical(inode, start_blk) >= isize)
past_eof = 1;
/*
* First hole after going past the EOF, this is our
* last extent
*/
if (past_eof && size) {
flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST;
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
} else if (size) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size, flags);
size = 0;
}
/* if we have holes up to/past EOF then we're done */
if (start_blk > last_blk || past_eof || ret)
break;
} else {
/*
* We have gone over the length of what we wanted to
* map, and it wasn't the entire file, so add the extent
* we got last time and exit.
*
* This is for the case where say we want to map all the
* way up to the second to the last block in a file, but
* the last block is a hole, making the second to last
* block FIEMAP_EXTENT_LAST. In this case we want to
* see if there is a hole after the second to last block
* so we can mark it properly. If we found data after
* we exceeded the length we were requesting, then we
* are good to go, just add the extent to the fieinfo
* and break
*/
if (start_blk > last_blk && !whole_file) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
break;
}
/*
* if size != 0 then we know we already have an extent
* to add, so add it.
*/
if (size) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
if (ret)
break;
}
logical = blk_to_logical(inode, start_blk);
phys = blk_to_logical(inode, map_bh.b_blocknr);
size = map_bh.b_size;
flags = FIEMAP_EXTENT_MERGED;
start_blk += logical_to_blk(inode, size);
/*
* If we are past the EOF, then we need to make sure as
* soon as we find a hole that the last extent we found
* is marked with FIEMAP_EXTENT_LAST
*/
if (!past_eof && logical + size >= isize)
past_eof = true;
}
cond_resched();
if (fatal_signal_pending(current)) {
ret = -EINTR;
break;
}
} while (1);
/* If ret is 1 then we just hit the end of the extent array */
if (ret == 1)
ret = 0;
return ret;
}
/**
* generic_block_fiemap - FIEMAP for block based inodes
* @inode: The inode to map
* @fieinfo: The mapping information
* @start: The initial block to map
* @len: The length of the extect to attempt to map
* @get_block: The block mapping function for the fs
*
* Calls __generic_block_fiemap to map the inode, after taking
* the inode's mutex lock.
*/
int generic_block_fiemap(struct inode *inode,
struct fiemap_extent_info *fieinfo, u64 start,
u64 len, get_block_t *get_block)
{
int ret;
inode_lock(inode);
ret = __generic_block_fiemap(inode, fieinfo, start, len, get_block);
inode_unlock(inode);
return ret;
}
EXPORT_SYMBOL(generic_block_fiemap);
#endif /* CONFIG_BLOCK */
/*
* This provides compatibility with legacy XFS pre-allocation ioctls
* which predate the fallocate syscall.
*
* Only the l_start, l_len and l_whence fields of the 'struct space_resv'
* are used here, rest are ignored.
*/
static int ioctl_preallocate(struct file *filp, int mode, void __user *argp)
{
struct inode *inode = file_inode(filp);
struct space_resv sr;
if (copy_from_user(&sr, argp, sizeof(sr)))
return -EFAULT;
switch (sr.l_whence) {
case SEEK_SET:
break;
case SEEK_CUR:
sr.l_start += filp->f_pos;
break;
case SEEK_END:
sr.l_start += i_size_read(inode);
break;
default:
return -EINVAL;
}
return vfs_fallocate(filp, mode | FALLOC_FL_KEEP_SIZE, sr.l_start,
sr.l_len);
}
/* on ia32 l_start is on a 32-bit boundary */
#if defined CONFIG_COMPAT && defined(CONFIG_X86_64)
/* just account for different alignment */
static int compat_ioctl_preallocate(struct file *file, int mode,
struct space_resv_32 __user *argp)
{
struct inode *inode = file_inode(file);
struct space_resv_32 sr;
if (copy_from_user(&sr, argp, sizeof(sr)))
return -EFAULT;
switch (sr.l_whence) {
case SEEK_SET:
break;
case SEEK_CUR:
sr.l_start += file->f_pos;
break;
case SEEK_END:
sr.l_start += i_size_read(inode);
break;
default:
return -EINVAL;
}
New code for 5.5: - Fill out the build string - Prevent inode fork extent count overflows - Refactor the allocator to reduce long tail latency - Rework incore log locking a little to reduce spinning - Break up the xfs_iomap_begin functions into smaller more cohesive parts - Fix allocation alignment being dropped too early when the allocation request is for more blocks than an AG is large - Other small cleanups - Clean up file buftarg retrieval helpers - Hoist the resvsp and unresvsp ioctls to the vfs - Remove the undocumented biosize mount option, since it has never been mentioned as existing or supported on linux - Clean up some of the mount option printing and parsing - Enhance attr leaf verifier to check block structure - Check dirent and attr names for invalid characters before passing them to the vfs - Refactor open-coded bmbt walking - Fix a few places where we return EIO instead of EFSCORRUPTED after failing metadata sanity checks - Fix a synchronization problem between fallocate and aio dio corrupting the file length - Clean up various loose ends in the iomap and bmap code - Convert to the new mount api - Make sure we always log something when returning EFSCORRUPTED - Fix some problems where long running scrub loops could trigger soft lockup warnings and/or fail to exit due to fatal signals pending - Fix various Coverity complaints - Remove most of the function pointers from the directory code to reduce indirection penalties - Ensure that dquots are attached to the inode when performing unwritten extent conversion after io - Deuglify incore projid and crtime types - Fix another AGI/AGF locking order deadlock when renaming - Clean up some quota typedefs - Remove the FSSETDM ioctls which haven't done anything in 20 years - Fix some memory leaks when mounting the log fails - Fix an underflow when updating an xattr leaf freemap - Remove some trivial wrappers - Report metadata corruption as an error, not a (potentially) fatal assertion - Clean up the dir/attr buffer mapping code - Allow fatal signals to kill scrub during parent pointer checks -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl3fNjcACgkQ+H93GTRK tOv/8w//Y0Oa9Paiy8+iPTChs3/PqeKp307Fj5KONG52haMCakEJFT5+/wpkIAJw uUmKiPolwN1ivviIUmIS14ThTJ7NV1jq0G0h/0tC25i/3hoJrGWdzqYJMlvhlqgE taHrjCwPTDkhRJ0D5QCrkkHPU7lSdquO5TWxltaqYLhyLIt8SkklD6dN1dHWEPnk k0j3TL+VqVJDYyEj1bLwJ0QUb2C3J8ygWnlviF/WxsSeJtJpGoeLEaYXhhsUK0Dt aHg70OM6zzFzrJJAtJeBXpgaFsG/Pqbcw4wUWSxEMWjVSJwCSKLuZ5F+p6NcqoEj HeLQkaGePoO61YCInk2JKLHIyx7ohqMOt7+Dm0mdbe1pvcKwV9ZcdkqKa8L/Fm6v bUP6a2hEpsGy7vLnkYxwYACTLPbGX3uLw8MUr6ZpJ+SpfVLktU4ycpr8dCkJkp6a 0qOpEeHsBDy74NkMOUa7Qrju7lJ2GiL70qqBwaPe+ubcUa3U/3WAsSekSzXgUwn8 Fap4r8wn7cUbxymAvO06RlU8YymuulAlyjwdo9gOL/Su/5POldss6dy1YuUtyq19 CD6NtkHqEUMsTc2cI+H65H44aEeckB1j0D2Grm2uMchAh0GcTSFVNF6jony++B8k s2sL2dEw9/9vr0uc1TSVF5ezxaONuyaCXdYXUkkdyq3iNvfpRCg= =aACq -----END PGP SIGNATURE----- Merge tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull XFS updates from Darrick Wong: "For this release, we changed quite a few things. Highlights: - Fixed some long tail latency problems in the block allocator - Removed some long deprecated (and for the past several years no-op) mount options and ioctls - Strengthened the extended attribute and directory verifiers - Audited and fixed all the places where we could return EFSCORRUPTED without logging anything - Refactored the old SGI space allocation ioctls to make the equivalent fallocate calls - Fixed a race between fallocate and directio - Fixed an integer overflow when files have more than a few billion(!) extents - Fixed a longstanding bug where quota accounting could be incorrect when performing unwritten extent conversion on a freshly mounted fs - Fixed various complaints in scrub about soft lockups and unresponsiveness to signals - De-vtable'd the directory handling code, which should make it faster - Converted to the new mount api, for better or for worse - Cleaned up some memory leaks and quite a lot of other smaller fixes and cleanups. A more detailed summary: - Fill out the build string - Prevent inode fork extent count overflows - Refactor the allocator to reduce long tail latency - Rework incore log locking a little to reduce spinning - Break up the xfs_iomap_begin functions into smaller more cohesive parts - Fix allocation alignment being dropped too early when the allocation request is for more blocks than an AG is large - Other small cleanups - Clean up file buftarg retrieval helpers - Hoist the resvsp and unresvsp ioctls to the vfs - Remove the undocumented biosize mount option, since it has never been mentioned as existing or supported on linux - Clean up some of the mount option printing and parsing - Enhance attr leaf verifier to check block structure - Check dirent and attr names for invalid characters before passing them to the vfs - Refactor open-coded bmbt walking - Fix a few places where we return EIO instead of EFSCORRUPTED after failing metadata sanity checks - Fix a synchronization problem between fallocate and aio dio corrupting the file length - Clean up various loose ends in the iomap and bmap code - Convert to the new mount api - Make sure we always log something when returning EFSCORRUPTED - Fix some problems where long running scrub loops could trigger soft lockup warnings and/or fail to exit due to fatal signals pending - Fix various Coverity complaints - Remove most of the function pointers from the directory code to reduce indirection penalties - Ensure that dquots are attached to the inode when performing unwritten extent conversion after io - Deuglify incore projid and crtime types - Fix another AGI/AGF locking order deadlock when renaming - Clean up some quota typedefs - Remove the FSSETDM ioctls which haven't done anything in 20 years - Fix some memory leaks when mounting the log fails - Fix an underflow when updating an xattr leaf freemap - Remove some trivial wrappers - Report metadata corruption as an error, not a (potentially) fatal assertion - Clean up the dir/attr buffer mapping code - Allow fatal signals to kill scrub during parent pointer checks" * tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (198 commits) xfs: allow parent directory scans to be interrupted with fatal signals xfs: remove the mappedbno argument to xfs_da_get_buf xfs: remove the mappedbno argument to xfs_da_read_buf xfs: split xfs_da3_node_read xfs: remove the mappedbno argument to xfs_dir3_leafn_read xfs: remove the mappedbno argument to xfs_dir3_leaf_read xfs: remove the mappedbno argument to xfs_attr3_leaf_read xfs: remove the mappedbno argument to xfs_da_reada_buf xfs: improve the xfs_dabuf_map calling conventions xfs: refactor xfs_dabuf_map xfs: simplify mappedbno handling in xfs_da_{get,read}_buf xfs: report corruption only as a regular error xfs: Remove kmem_zone_free() wrapper xfs: Remove kmem_zone_destroy() wrapper xfs: Remove slab init wrappers xfs: fix attr leaf header freemap.size underflow xfs: fix some memory leaks in log recovery xfs: fix another missing include xfs: remove XFS_IOC_FSSETDM and XFS_IOC_FSSETDM_BY_HANDLE xfs: remove duplicated include from xfs_dir2_data.c ...
2019-12-03 05:46:22 +07:00
return vfs_fallocate(file, mode | FALLOC_FL_KEEP_SIZE, sr.l_start, sr.l_len);
}
#endif
static int file_ioctl(struct file *filp, unsigned int cmd, int __user *p)
{
switch (cmd) {
case FIBMAP:
return ioctl_fibmap(filp, p);
case FS_IOC_RESVSP:
case FS_IOC_RESVSP64:
return ioctl_preallocate(filp, 0, p);
case FS_IOC_UNRESVSP:
case FS_IOC_UNRESVSP64:
return ioctl_preallocate(filp, FALLOC_FL_PUNCH_HOLE, p);
case FS_IOC_ZERO_RANGE:
return ioctl_preallocate(filp, FALLOC_FL_ZERO_RANGE, p);
}
return -ENOIOCTLCMD;
}
static int ioctl_fionbio(struct file *filp, int __user *argp)
{
unsigned int flag;
int on, error;
error = get_user(on, argp);
if (error)
return error;
flag = O_NONBLOCK;
#ifdef __sparc__
/* SunOS compatibility item. */
if (O_NONBLOCK != O_NDELAY)
flag |= O_NDELAY;
#endif
spin_lock(&filp->f_lock);
if (on)
filp->f_flags |= flag;
else
filp->f_flags &= ~flag;
spin_unlock(&filp->f_lock);
return error;
}
static int ioctl_fioasync(unsigned int fd, struct file *filp,
int __user *argp)
{
unsigned int flag;
int on, error;
error = get_user(on, argp);
if (error)
return error;
flag = on ? FASYNC : 0;
/* Did FASYNC state change ? */
if ((flag ^ filp->f_flags) & FASYNC) {
if (filp->f_op->fasync)
/* fasync() adjusts filp->f_flags */
error = filp->f_op->fasync(fd, filp, on);
else
error = -ENOTTY;
}
return error < 0 ? error : 0;
}
static int ioctl_fsfreeze(struct file *filp)
{
struct super_block *sb = file_inode(filp)->i_sb;
if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN))
return -EPERM;
/* If filesystem doesn't support freeze feature, return. */
if (sb->s_op->freeze_fs == NULL && sb->s_op->freeze_super == NULL)
return -EOPNOTSUPP;
/* Freeze */
if (sb->s_op->freeze_super)
return sb->s_op->freeze_super(sb);
return freeze_super(sb);
}
static int ioctl_fsthaw(struct file *filp)
{
struct super_block *sb = file_inode(filp)->i_sb;
if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN))
return -EPERM;
/* Thaw */
if (sb->s_op->thaw_super)
return sb->s_op->thaw_super(sb);
return thaw_super(sb);
}
static int ioctl_file_dedupe_range(struct file *file,
struct file_dedupe_range __user *argp)
{
struct file_dedupe_range *same = NULL;
int ret;
unsigned long size;
u16 count;
if (get_user(count, &argp->dest_count)) {
ret = -EFAULT;
goto out;
}
size = offsetof(struct file_dedupe_range __user, info[count]);
if (size > PAGE_SIZE) {
ret = -ENOMEM;
goto out;
}
same = memdup_user(argp, size);
if (IS_ERR(same)) {
ret = PTR_ERR(same);
same = NULL;
goto out;
}
same->dest_count = count;
ret = vfs_dedupe_file_range(file, same);
if (ret)
goto out;
ret = copy_to_user(argp, same, size);
if (ret)
ret = -EFAULT;
out:
kfree(same);
return ret;
}
/*
* do_vfs_ioctl() is not for drivers and not intended to be EXPORT_SYMBOL()'d.
* It's just a simple helper for sys_ioctl and compat_sys_ioctl.
*
* When you add any new common ioctls to the switches above and below,
* please ensure they have compatible arguments in compat mode.
*/
static int do_vfs_ioctl(struct file *filp, unsigned int fd,
unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
struct inode *inode = file_inode(filp);
switch (cmd) {
case FIOCLEX:
set_close_on_exec(fd, 1);
return 0;
case FIONCLEX:
set_close_on_exec(fd, 0);
return 0;
case FIONBIO:
return ioctl_fionbio(filp, argp);
case FIOASYNC:
return ioctl_fioasync(fd, filp, argp);
case FIOQSIZE:
if (S_ISDIR(inode->i_mode) || S_ISREG(inode->i_mode) ||
S_ISLNK(inode->i_mode)) {
loff_t res = inode_get_bytes(inode);
return copy_to_user(argp, &res, sizeof(res)) ?
-EFAULT : 0;
}
return -ENOTTY;
case FIFREEZE:
return ioctl_fsfreeze(filp);
case FITHAW:
return ioctl_fsthaw(filp);
case FS_IOC_FIEMAP:
return ioctl_fiemap(filp, argp);
case FIGETBSZ:
/* anon_bdev filesystems may not have a block size */
if (!inode->i_sb->s_blocksize)
return -EINVAL;
return put_user(inode->i_sb->s_blocksize, (int __user *)argp);
case FICLONE:
return ioctl_file_clone(filp, arg, 0, 0, 0);
case FICLONERANGE:
return ioctl_file_clone_range(filp, argp);
case FIDEDUPERANGE:
return ioctl_file_dedupe_range(filp, argp);
case FIONREAD:
if (!S_ISREG(inode->i_mode))
return vfs_ioctl(filp, cmd, arg);
return put_user(i_size_read(inode) - filp->f_pos,
(int __user *)argp);
default:
if (S_ISREG(inode->i_mode))
return file_ioctl(filp, cmd, argp);
break;
}
return -ENOIOCTLCMD;
}
int ksys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
{
struct fd f = fdget(fd);
int error;
if (!f.file)
return -EBADF;
error = security_file_ioctl(f.file, cmd, arg);
if (error)
goto out;
error = do_vfs_ioctl(f.file, fd, cmd, arg);
if (error == -ENOIOCTLCMD)
error = vfs_ioctl(f.file, cmd, arg);
out:
fdput(f);
return error;
}
SYSCALL_DEFINE3(ioctl, unsigned int, fd, unsigned int, cmd, unsigned long, arg)
{
return ksys_ioctl(fd, cmd, arg);
}
#ifdef CONFIG_COMPAT
/**
* compat_ptr_ioctl - generic implementation of .compat_ioctl file operation
*
* This is not normally called as a function, but instead set in struct
* file_operations as
*
* .compat_ioctl = compat_ptr_ioctl,
*
* On most architectures, the compat_ptr_ioctl() just passes all arguments
* to the corresponding ->ioctl handler. The exception is arch/s390, where
* compat_ptr() clears the top bit of a 32-bit pointer value, so user space
* pointers to the second 2GB alias the first 2GB, as is the case for
* native 32-bit s390 user space.
*
* The compat_ptr_ioctl() function must therefore be used only with ioctl
* functions that either ignore the argument or pass a pointer to a
* compatible data type.
*
* If any ioctl command handled by fops->unlocked_ioctl passes a plain
* integer instead of a pointer, or any of the passed data types
* is incompatible between 32-bit and 64-bit architectures, a proper
* handler is required instead of compat_ptr_ioctl.
*/
long compat_ptr_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
if (!file->f_op->unlocked_ioctl)
return -ENOIOCTLCMD;
return file->f_op->unlocked_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
}
EXPORT_SYMBOL(compat_ptr_ioctl);
COMPAT_SYSCALL_DEFINE3(ioctl, unsigned int, fd, unsigned int, cmd,
compat_ulong_t, arg)
{
struct fd f = fdget(fd);
int error;
if (!f.file)
return -EBADF;
/* RED-PEN how should LSM module know it's handling 32bit? */
error = security_file_ioctl(f.file, cmd, arg);
if (error)
goto out;
switch (cmd) {
/* FICLONE takes an int argument, so don't use compat_ptr() */
case FICLONE:
error = ioctl_file_clone(f.file, arg, 0, 0, 0);
break;
#if defined(CONFIG_X86_64)
/* these get messy on amd64 due to alignment differences */
case FS_IOC_RESVSP_32:
case FS_IOC_RESVSP64_32:
error = compat_ioctl_preallocate(f.file, 0, compat_ptr(arg));
break;
case FS_IOC_UNRESVSP_32:
case FS_IOC_UNRESVSP64_32:
error = compat_ioctl_preallocate(f.file, FALLOC_FL_PUNCH_HOLE,
compat_ptr(arg));
break;
case FS_IOC_ZERO_RANGE_32:
error = compat_ioctl_preallocate(f.file, FALLOC_FL_ZERO_RANGE,
compat_ptr(arg));
break;
#endif
/*
* everything else in do_vfs_ioctl() takes either a compatible
* pointer argument or no argument -- call it with a modified
* argument.
*/
default:
error = do_vfs_ioctl(f.file, fd, cmd,
(unsigned long)compat_ptr(arg));
if (error != -ENOIOCTLCMD)
break;
if (f.file->f_op->compat_ioctl)
error = f.file->f_op->compat_ioctl(f.file, cmd, arg);
if (error == -ENOIOCTLCMD)
error = -ENOTTY;
break;
}
out:
fdput(f);
return error;
}
#endif