2010-10-14 21:49:06 +07:00
|
|
|
/*
|
|
|
|
* ASoC driver for Cirrus Logic EP93xx AC97 controller.
|
|
|
|
*
|
|
|
|
* Copyright (c) 2010 Mika Westerberg
|
|
|
|
*
|
|
|
|
* Based on s3c-ac97 ASoC driver by Jaswinder Singh.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/delay.h>
|
2013-01-21 17:09:26 +07:00
|
|
|
#include <linux/err.h>
|
2010-10-14 21:49:06 +07:00
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
|
|
|
#include <sound/core.h>
|
|
|
|
#include <sound/ac97_codec.h>
|
|
|
|
#include <sound/soc.h>
|
|
|
|
|
2012-08-24 20:12:11 +07:00
|
|
|
#include <linux/platform_data/dma-ep93xx.h>
|
2010-10-14 21:49:06 +07:00
|
|
|
#include "ep93xx-pcm.h"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Per channel (1-4) registers.
|
|
|
|
*/
|
|
|
|
#define AC97CH(n) (((n) - 1) * 0x20)
|
|
|
|
|
|
|
|
#define AC97DR(n) (AC97CH(n) + 0x0000)
|
|
|
|
|
|
|
|
#define AC97RXCR(n) (AC97CH(n) + 0x0004)
|
|
|
|
#define AC97RXCR_REN BIT(0)
|
|
|
|
#define AC97RXCR_RX3 BIT(3)
|
|
|
|
#define AC97RXCR_RX4 BIT(4)
|
|
|
|
#define AC97RXCR_CM BIT(15)
|
|
|
|
|
|
|
|
#define AC97TXCR(n) (AC97CH(n) + 0x0008)
|
|
|
|
#define AC97TXCR_TEN BIT(0)
|
|
|
|
#define AC97TXCR_TX3 BIT(3)
|
|
|
|
#define AC97TXCR_TX4 BIT(4)
|
|
|
|
#define AC97TXCR_CM BIT(15)
|
|
|
|
|
|
|
|
#define AC97SR(n) (AC97CH(n) + 0x000c)
|
|
|
|
#define AC97SR_TXFE BIT(1)
|
|
|
|
#define AC97SR_TXUE BIT(6)
|
|
|
|
|
|
|
|
#define AC97RISR(n) (AC97CH(n) + 0x0010)
|
|
|
|
#define AC97ISR(n) (AC97CH(n) + 0x0014)
|
|
|
|
#define AC97IE(n) (AC97CH(n) + 0x0018)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Global AC97 controller registers.
|
|
|
|
*/
|
|
|
|
#define AC97S1DATA 0x0080
|
|
|
|
#define AC97S2DATA 0x0084
|
|
|
|
#define AC97S12DATA 0x0088
|
|
|
|
|
|
|
|
#define AC97RGIS 0x008c
|
|
|
|
#define AC97GIS 0x0090
|
|
|
|
#define AC97IM 0x0094
|
|
|
|
/*
|
|
|
|
* Common bits for RGIS, GIS and IM registers.
|
|
|
|
*/
|
|
|
|
#define AC97_SLOT2RXVALID BIT(1)
|
|
|
|
#define AC97_CODECREADY BIT(5)
|
|
|
|
#define AC97_SLOT2TXCOMPLETE BIT(6)
|
|
|
|
|
|
|
|
#define AC97EOI 0x0098
|
|
|
|
#define AC97EOI_WINT BIT(0)
|
|
|
|
#define AC97EOI_CODECREADY BIT(1)
|
|
|
|
|
|
|
|
#define AC97GCR 0x009c
|
|
|
|
#define AC97GCR_AC97IFE BIT(0)
|
|
|
|
|
|
|
|
#define AC97RESET 0x00a0
|
|
|
|
#define AC97RESET_TIMEDRESET BIT(0)
|
|
|
|
|
|
|
|
#define AC97SYNC 0x00a4
|
|
|
|
#define AC97SYNC_TIMEDSYNC BIT(0)
|
|
|
|
|
|
|
|
#define AC97_TIMEOUT msecs_to_jiffies(5)
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct ep93xx_ac97_info - EP93xx AC97 controller info structure
|
|
|
|
* @lock: mutex serializing access to the bus (slot 1 & 2 ops)
|
|
|
|
* @dev: pointer to the platform device dev structure
|
|
|
|
* @regs: mapped AC97 controller registers
|
|
|
|
* @done: bus ops wait here for an interrupt
|
|
|
|
*/
|
|
|
|
struct ep93xx_ac97_info {
|
|
|
|
struct mutex lock;
|
|
|
|
struct device *dev;
|
|
|
|
void __iomem *regs;
|
|
|
|
struct completion done;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* currently ALSA only supports a single AC97 device */
|
|
|
|
static struct ep93xx_ac97_info *ep93xx_ac97_info;
|
|
|
|
|
|
|
|
static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_out = {
|
|
|
|
.name = "ac97-pcm-out",
|
2011-05-29 17:10:04 +07:00
|
|
|
.dma_port = EP93XX_DMA_AAC1,
|
2010-10-14 21:49:06 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_in = {
|
|
|
|
.name = "ac97-pcm-in",
|
2011-05-29 17:10:04 +07:00
|
|
|
.dma_port = EP93XX_DMA_AAC1,
|
2010-10-14 21:49:06 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info,
|
|
|
|
unsigned reg)
|
|
|
|
{
|
|
|
|
return __raw_readl(info->regs + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void ep93xx_ac97_write_reg(struct ep93xx_ac97_info *info,
|
|
|
|
unsigned reg, unsigned val)
|
|
|
|
{
|
|
|
|
__raw_writel(val, info->regs + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned short ep93xx_ac97_read(struct snd_ac97 *ac97,
|
|
|
|
unsigned short reg)
|
|
|
|
{
|
|
|
|
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
|
|
|
unsigned short val;
|
|
|
|
|
|
|
|
mutex_lock(&info->lock);
|
|
|
|
|
|
|
|
ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
|
|
|
|
ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2RXVALID);
|
|
|
|
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) {
|
|
|
|
dev_warn(info->dev, "timeout reading register %x\n", reg);
|
|
|
|
mutex_unlock(&info->lock);
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
}
|
|
|
|
val = (unsigned short)ep93xx_ac97_read_reg(info, AC97S2DATA);
|
|
|
|
|
|
|
|
mutex_unlock(&info->lock);
|
|
|
|
return val;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ep93xx_ac97_write(struct snd_ac97 *ac97,
|
|
|
|
unsigned short reg,
|
|
|
|
unsigned short val)
|
|
|
|
{
|
|
|
|
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
|
|
|
|
|
|
|
mutex_lock(&info->lock);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Writes to the codec need to be done so that slot 2 is filled in
|
|
|
|
* before slot 1.
|
|
|
|
*/
|
|
|
|
ep93xx_ac97_write_reg(info, AC97S2DATA, val);
|
|
|
|
ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
|
|
|
|
|
|
|
|
ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2TXCOMPLETE);
|
|
|
|
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
|
|
|
|
dev_warn(info->dev, "timeout writing register %x\n", reg);
|
|
|
|
|
|
|
|
mutex_unlock(&info->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ep93xx_ac97_warm_reset(struct snd_ac97 *ac97)
|
|
|
|
{
|
|
|
|
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
|
|
|
|
|
|
|
mutex_lock(&info->lock);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We are assuming that before this functions gets called, the codec
|
|
|
|
* BIT_CLK is stopped by forcing the codec into powerdown mode. We can
|
|
|
|
* control the SYNC signal directly via AC97SYNC register. Using
|
|
|
|
* TIMEDSYNC the controller will keep the SYNC high > 1us.
|
|
|
|
*/
|
|
|
|
ep93xx_ac97_write_reg(info, AC97SYNC, AC97SYNC_TIMEDSYNC);
|
|
|
|
ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
|
|
|
|
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
|
|
|
|
dev_warn(info->dev, "codec warm reset timeout\n");
|
|
|
|
|
|
|
|
mutex_unlock(&info->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ep93xx_ac97_cold_reset(struct snd_ac97 *ac97)
|
|
|
|
{
|
|
|
|
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
|
|
|
|
|
|
|
mutex_lock(&info->lock);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* For doing cold reset, we disable the AC97 controller interface, clear
|
|
|
|
* WINT and CODECREADY bits, and finally enable the interface again.
|
|
|
|
*/
|
|
|
|
ep93xx_ac97_write_reg(info, AC97GCR, 0);
|
|
|
|
ep93xx_ac97_write_reg(info, AC97EOI, AC97EOI_CODECREADY | AC97EOI_WINT);
|
|
|
|
ep93xx_ac97_write_reg(info, AC97GCR, AC97GCR_AC97IFE);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Now, assert the reset and wait for the codec to become ready.
|
|
|
|
*/
|
|
|
|
ep93xx_ac97_write_reg(info, AC97RESET, AC97RESET_TIMEDRESET);
|
|
|
|
ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
|
|
|
|
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
|
|
|
|
dev_warn(info->dev, "codec cold reset timeout\n");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Give the codec some time to come fully out from the reset. This way
|
|
|
|
* we ensure that the subsequent reads/writes will work.
|
|
|
|
*/
|
|
|
|
usleep_range(15000, 20000);
|
|
|
|
|
|
|
|
mutex_unlock(&info->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t ep93xx_ac97_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct ep93xx_ac97_info *info = dev_id;
|
|
|
|
unsigned status, mask;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Just mask out the interrupt and wake up the waiting thread.
|
|
|
|
* Interrupts are cleared via reading/writing to slot 1 & 2 registers by
|
|
|
|
* the waiting thread.
|
|
|
|
*/
|
|
|
|
status = ep93xx_ac97_read_reg(info, AC97GIS);
|
|
|
|
mask = ep93xx_ac97_read_reg(info, AC97IM);
|
|
|
|
mask &= ~status;
|
|
|
|
ep93xx_ac97_write_reg(info, AC97IM, mask);
|
|
|
|
|
|
|
|
complete(&info->done);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct snd_ac97_bus_ops soc_ac97_ops = {
|
|
|
|
.read = ep93xx_ac97_read,
|
|
|
|
.write = ep93xx_ac97_write,
|
|
|
|
.reset = ep93xx_ac97_cold_reset,
|
|
|
|
.warm_reset = ep93xx_ac97_warm_reset,
|
|
|
|
};
|
|
|
|
EXPORT_SYMBOL_GPL(soc_ac97_ops);
|
|
|
|
|
|
|
|
static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream,
|
|
|
|
int cmd, struct snd_soc_dai *dai)
|
|
|
|
{
|
|
|
|
struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai);
|
|
|
|
unsigned v = 0;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
|
|
/*
|
|
|
|
* Enable compact mode, TX slots 3 & 4, and the TX FIFO
|
|
|
|
* itself.
|
|
|
|
*/
|
|
|
|
v |= AC97TXCR_CM;
|
|
|
|
v |= AC97TXCR_TX3 | AC97TXCR_TX4;
|
|
|
|
v |= AC97TXCR_TEN;
|
|
|
|
ep93xx_ac97_write_reg(info, AC97TXCR(1), v);
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* Enable compact mode, RX slots 3 & 4, and the RX FIFO
|
|
|
|
* itself.
|
|
|
|
*/
|
|
|
|
v |= AC97RXCR_CM;
|
|
|
|
v |= AC97RXCR_RX3 | AC97RXCR_RX4;
|
|
|
|
v |= AC97RXCR_REN;
|
|
|
|
ep93xx_ac97_write_reg(info, AC97RXCR(1), v);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
|
|
/*
|
|
|
|
* As per Cirrus EP93xx errata described below:
|
|
|
|
*
|
|
|
|
* http://www.cirrus.com/en/pubs/errata/ER667E2B.pdf
|
|
|
|
*
|
|
|
|
* we will wait for the TX FIFO to be empty before
|
|
|
|
* clearing the TEN bit.
|
|
|
|
*/
|
|
|
|
unsigned long timeout = jiffies + AC97_TIMEOUT;
|
|
|
|
|
|
|
|
do {
|
|
|
|
v = ep93xx_ac97_read_reg(info, AC97SR(1));
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
|
|
dev_warn(info->dev, "TX timeout\n");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} while (!(v & (AC97SR_TXFE | AC97SR_TXUE)));
|
|
|
|
|
|
|
|
/* disable the TX FIFO */
|
|
|
|
ep93xx_ac97_write_reg(info, AC97TXCR(1), 0);
|
|
|
|
} else {
|
|
|
|
/* disable the RX FIFO */
|
|
|
|
ep93xx_ac97_write_reg(info, AC97RXCR(1), 0);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
dev_warn(info->dev, "unknown command %d\n", cmd);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ep93xx_ac97_startup(struct snd_pcm_substream *substream,
|
|
|
|
struct snd_soc_dai *dai)
|
|
|
|
{
|
|
|
|
struct ep93xx_pcm_dma_params *dma_data;
|
|
|
|
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
|
|
dma_data = &ep93xx_ac97_pcm_out;
|
|
|
|
else
|
|
|
|
dma_data = &ep93xx_ac97_pcm_in;
|
|
|
|
|
|
|
|
snd_soc_dai_set_dma_data(dai, substream, dma_data);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-11-23 17:40:40 +07:00
|
|
|
static const struct snd_soc_dai_ops ep93xx_ac97_dai_ops = {
|
2010-10-14 21:49:06 +07:00
|
|
|
.startup = ep93xx_ac97_startup,
|
|
|
|
.trigger = ep93xx_ac97_trigger,
|
|
|
|
};
|
|
|
|
|
2011-10-03 10:33:05 +07:00
|
|
|
static struct snd_soc_dai_driver ep93xx_ac97_dai = {
|
2010-10-14 21:49:06 +07:00
|
|
|
.name = "ep93xx-ac97",
|
|
|
|
.id = 0,
|
|
|
|
.ac97_control = 1,
|
|
|
|
.playback = {
|
|
|
|
.stream_name = "AC97 Playback",
|
|
|
|
.channels_min = 2,
|
|
|
|
.channels_max = 2,
|
|
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
|
|
},
|
|
|
|
.capture = {
|
|
|
|
.stream_name = "AC97 Capture",
|
|
|
|
.channels_min = 2,
|
|
|
|
.channels_max = 2,
|
|
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
|
|
},
|
|
|
|
.ops = &ep93xx_ac97_dai_ops,
|
|
|
|
};
|
|
|
|
|
2012-12-07 21:26:23 +07:00
|
|
|
static int ep93xx_ac97_probe(struct platform_device *pdev)
|
2010-10-14 21:49:06 +07:00
|
|
|
{
|
|
|
|
struct ep93xx_ac97_info *info;
|
2012-03-27 06:00:08 +07:00
|
|
|
struct resource *res;
|
|
|
|
unsigned int irq;
|
2010-10-14 21:49:06 +07:00
|
|
|
int ret;
|
|
|
|
|
2012-03-27 06:00:08 +07:00
|
|
|
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
2010-10-14 21:49:06 +07:00
|
|
|
if (!info)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2012-03-27 06:00:08 +07:00
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res)
|
|
|
|
return -ENODEV;
|
2010-10-14 21:49:06 +07:00
|
|
|
|
2013-01-21 17:09:26 +07:00
|
|
|
info->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
|
|
if (IS_ERR(info->regs))
|
|
|
|
return PTR_ERR(info->regs);
|
2010-10-14 21:49:06 +07:00
|
|
|
|
2012-03-27 06:00:08 +07:00
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (!irq)
|
|
|
|
return -ENODEV;
|
2010-10-14 21:49:06 +07:00
|
|
|
|
2012-03-27 06:00:08 +07:00
|
|
|
ret = devm_request_irq(&pdev->dev, irq, ep93xx_ac97_interrupt,
|
|
|
|
IRQF_TRIGGER_HIGH, pdev->name, info);
|
|
|
|
if (ret)
|
|
|
|
goto fail;
|
2010-10-14 21:49:06 +07:00
|
|
|
|
2012-03-27 06:00:08 +07:00
|
|
|
dev_set_drvdata(&pdev->dev, info);
|
2010-10-14 21:49:06 +07:00
|
|
|
|
2012-03-27 06:00:08 +07:00
|
|
|
mutex_init(&info->lock);
|
|
|
|
init_completion(&info->done);
|
|
|
|
info->dev = &pdev->dev;
|
2010-10-14 21:49:06 +07:00
|
|
|
|
|
|
|
ep93xx_ac97_info = info;
|
|
|
|
platform_set_drvdata(pdev, info);
|
|
|
|
|
|
|
|
ret = snd_soc_register_dai(&pdev->dev, &ep93xx_ac97_dai);
|
|
|
|
if (ret)
|
2012-03-27 06:00:08 +07:00
|
|
|
goto fail;
|
2010-10-14 21:49:06 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
2012-03-27 06:00:08 +07:00
|
|
|
fail:
|
2010-10-14 21:49:06 +07:00
|
|
|
platform_set_drvdata(pdev, NULL);
|
2012-03-27 06:00:08 +07:00
|
|
|
ep93xx_ac97_info = NULL;
|
|
|
|
dev_set_drvdata(&pdev->dev, NULL);
|
2010-10-14 21:49:06 +07:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-12-07 21:26:23 +07:00
|
|
|
static int ep93xx_ac97_remove(struct platform_device *pdev)
|
2010-10-14 21:49:06 +07:00
|
|
|
{
|
|
|
|
struct ep93xx_ac97_info *info = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
snd_soc_unregister_dai(&pdev->dev);
|
|
|
|
|
|
|
|
/* disable the AC97 controller */
|
|
|
|
ep93xx_ac97_write_reg(info, AC97GCR, 0);
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
2012-03-27 06:00:08 +07:00
|
|
|
ep93xx_ac97_info = NULL;
|
|
|
|
dev_set_drvdata(&pdev->dev, NULL);
|
2010-10-14 21:49:06 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver ep93xx_ac97_driver = {
|
|
|
|
.probe = ep93xx_ac97_probe,
|
2012-12-07 21:26:23 +07:00
|
|
|
.remove = ep93xx_ac97_remove,
|
2010-10-14 21:49:06 +07:00
|
|
|
.driver = {
|
|
|
|
.name = "ep93xx-ac97",
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2011-11-24 11:07:55 +07:00
|
|
|
module_platform_driver(ep93xx_ac97_driver);
|
2010-10-14 21:49:06 +07:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("EP93xx AC97 ASoC Driver");
|
|
|
|
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_ALIAS("platform:ep93xx-ac97");
|