linux_dsm_epyc7002/drivers/gpu/drm/tidss/tidss_encoder.h

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
 * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
 */

#ifndef __TIDSS_ENCODER_H__
#define __TIDSS_ENCODER_H__

#include <drm/drm_encoder.h>

struct tidss_device;

struct drm_encoder *tidss_encoder_create(struct tidss_device *tidss,
					 u32 encoder_type, u32 possible_crtcs);

#endif
drm/tidss: New driver for TI Keystone platform Display SubSystem This patch adds a new DRM driver for Texas Instruments DSS IPs used on Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is a major change to the older DSS IP versions, which are supported by the omapdrm driver. While on higher level the Keystone DSS resembles the older DSS versions, the registers are completely different and the internal pipelines differ a lot. DSS IP found on K2G is an "ultra-light" version, and has only a single plane and a single output. The K3 DSS IPs are found on AM65x and J721E SoCs. AM65x DSS has two video ports, one full video plane, and another "lite" plane without scaling support. J721E has 4 video ports, 2 video planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS) output. Version history: v2: - rebased on top of drm-next-2019-11-27 - sort all include lines in all files - remove all include <drm/drmP.h> - remove select "select VIDEOMODE_HELPERS" - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no to call it in new modeset case as it is also called in vp_enable()) - change probe sequence and drm_device allocation (follow example in drm_drv.c) - use __maybe_unused instead of #ifdef for pm functions - remove "struct drm_fbdev_cma *fbdev;" from driver data - check panel connector type before connecting it v3: no change v4: no change v5: - remove fifo underflow irq handling, it is not an error and it should be used for debug purposes only - memory tuning, prefetch plane fifo up to high-threshold value to minimize possibility of underflows. v6: - Check CTM and gamma support from dispc_features when creating crtc - Implement CTM support for k2g and fix k3 CTM implementation - Remove gamma property persistence and always write color properties in a new modeset v7: - Fix checkpatch.pl --strict issues - Rebase on top of drm-misc-next-2020-01-10 v8: - Remove idle debug prints from dispc_init() - Add Reviewed-by: Benoit Parrot <bparrot@ti.com> v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid conflict exported omapfb function with same name - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com 2019-11-08 14:45:28 +07:00			`/* SPDX-License-Identifier: GPL-2.0 */`
			`/*`
			`* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/`
			`* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>`
			`*/`

			`#ifndef __TIDSS_ENCODER_H__`
			`#define __TIDSS_ENCODER_H__`

			`#include <drm/drm_encoder.h>`

			`struct tidss_device;`

			`struct drm_encoder tidss_encoder_create(struct tidss_device tidss,`
			`u32 encoder_type, u32 possible_crtcs);`

			`#endif`