2012-04-27 19:24:04 +07:00
|
|
|
/*
|
|
|
|
* Defines for the EMIF driver
|
|
|
|
*
|
|
|
|
* Copyright (C) 2012 Texas Instruments, Inc.
|
|
|
|
*
|
|
|
|
* Benoit Cousson (b-cousson@ti.com)
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
#ifndef __EMIF_H
|
|
|
|
#define __EMIF_H
|
|
|
|
|
2012-04-27 19:24:05 +07:00
|
|
|
/*
|
|
|
|
* Maximum number of different frequencies supported by EMIF driver
|
|
|
|
* Determines the number of entries in the pointer array for register
|
|
|
|
* cache
|
|
|
|
*/
|
|
|
|
#define EMIF_MAX_NUM_FREQUENCIES 6
|
|
|
|
|
2012-04-27 19:24:06 +07:00
|
|
|
/* State of the core voltage */
|
|
|
|
#define DDR_VOLTAGE_STABLE 0
|
|
|
|
#define DDR_VOLTAGE_RAMPING 1
|
|
|
|
|
|
|
|
/* Defines for timing De-rating */
|
|
|
|
#define EMIF_NORMAL_TIMINGS 0
|
|
|
|
#define EMIF_DERATED_TIMINGS 1
|
|
|
|
|
|
|
|
/* Length of the forced read idle period in terms of cycles */
|
|
|
|
#define EMIF_READ_IDLE_LEN_VAL 5
|
|
|
|
|
|
|
|
/*
|
|
|
|
* forced read idle interval to be used when voltage
|
|
|
|
* is changed as part of DVFS/DPS - 1ms
|
|
|
|
*/
|
|
|
|
#define READ_IDLE_INTERVAL_DVFS (1*1000000)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Forced read idle interval to be used when voltage is stable
|
|
|
|
* 50us - or maximum value will do
|
|
|
|
*/
|
|
|
|
#define READ_IDLE_INTERVAL_NORMAL (50*1000000)
|
|
|
|
|
|
|
|
/* DLL calibration interval when voltage is NOT stable - 1us */
|
|
|
|
#define DLL_CALIB_INTERVAL_DVFS (1*1000000)
|
|
|
|
|
|
|
|
#define DLL_CALIB_ACK_WAIT_VAL 5
|
|
|
|
|
|
|
|
/* Interval between ZQCS commands - hw team recommended value */
|
|
|
|
#define EMIF_ZQCS_INTERVAL_US (50*1000)
|
|
|
|
/* Enable ZQ Calibration on exiting Self-refresh */
|
|
|
|
#define ZQ_SFEXITEN_ENABLE 1
|
|
|
|
/*
|
|
|
|
* ZQ Calibration simultaneously on both chip-selects:
|
|
|
|
* Needs one calibration resistor per CS
|
|
|
|
*/
|
|
|
|
#define ZQ_DUALCALEN_DISABLE 0
|
|
|
|
#define ZQ_DUALCALEN_ENABLE 1
|
|
|
|
|
|
|
|
#define T_ZQCS_DEFAULT_NS 90
|
|
|
|
#define T_ZQCL_DEFAULT_NS 360
|
|
|
|
#define T_ZQINIT_DEFAULT_NS 1000
|
|
|
|
|
|
|
|
/* DPD_EN */
|
|
|
|
#define DPD_DISABLE 0
|
|
|
|
#define DPD_ENABLE 1
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Default values for the low-power entry to be used if not provided by user.
|
|
|
|
* OMAP4/5 has a hw bug(i735) due to which this value can not be less than 512
|
|
|
|
* Timeout values are in DDR clock 'cycles' and frequency threshold in Hz
|
|
|
|
*/
|
|
|
|
#define EMIF_LP_MODE_TIMEOUT_PERFORMANCE 2048
|
|
|
|
#define EMIF_LP_MODE_TIMEOUT_POWER 512
|
|
|
|
#define EMIF_LP_MODE_FREQ_THRESHOLD 400000000
|
|
|
|
|
|
|
|
/* DDR_PHY_CTRL_1 values for EMIF4D - ATTILA PHY combination */
|
|
|
|
#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY 0x049FF000
|
|
|
|
#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY 0x41
|
|
|
|
#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY 0x80
|
|
|
|
#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY 0xFF
|
|
|
|
|
|
|
|
/* DDR_PHY_CTRL_1 values for EMIF4D5 INTELLIPHY combination */
|
|
|
|
#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY 0x0E084200
|
|
|
|
#define EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS 10000
|
|
|
|
|
|
|
|
/* TEMP_ALERT_CONFIG - corresponding to temp gradient 5 C/s */
|
|
|
|
#define TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS 360
|
|
|
|
|
|
|
|
#define EMIF_T_CSTA 3
|
|
|
|
#define EMIF_T_PDLL_UL 128
|
|
|
|
|
|
|
|
/* External PHY control registers magic values */
|
|
|
|
#define EMIF_EXT_PHY_CTRL_1_VAL 0x04020080
|
|
|
|
#define EMIF_EXT_PHY_CTRL_5_VAL 0x04010040
|
|
|
|
#define EMIF_EXT_PHY_CTRL_6_VAL 0x01004010
|
|
|
|
#define EMIF_EXT_PHY_CTRL_7_VAL 0x00001004
|
|
|
|
#define EMIF_EXT_PHY_CTRL_8_VAL 0x04010040
|
|
|
|
#define EMIF_EXT_PHY_CTRL_9_VAL 0x01004010
|
|
|
|
#define EMIF_EXT_PHY_CTRL_10_VAL 0x00001004
|
|
|
|
#define EMIF_EXT_PHY_CTRL_11_VAL 0x00000000
|
|
|
|
#define EMIF_EXT_PHY_CTRL_12_VAL 0x00000000
|
|
|
|
#define EMIF_EXT_PHY_CTRL_13_VAL 0x00000000
|
|
|
|
#define EMIF_EXT_PHY_CTRL_14_VAL 0x80080080
|
|
|
|
#define EMIF_EXT_PHY_CTRL_15_VAL 0x00800800
|
|
|
|
#define EMIF_EXT_PHY_CTRL_16_VAL 0x08102040
|
|
|
|
#define EMIF_EXT_PHY_CTRL_17_VAL 0x00000001
|
|
|
|
#define EMIF_EXT_PHY_CTRL_18_VAL 0x540A8150
|
|
|
|
#define EMIF_EXT_PHY_CTRL_19_VAL 0xA81502A0
|
|
|
|
#define EMIF_EXT_PHY_CTRL_20_VAL 0x002A0540
|
|
|
|
#define EMIF_EXT_PHY_CTRL_21_VAL 0x00000000
|
|
|
|
#define EMIF_EXT_PHY_CTRL_22_VAL 0x00000000
|
|
|
|
#define EMIF_EXT_PHY_CTRL_23_VAL 0x00000000
|
|
|
|
#define EMIF_EXT_PHY_CTRL_24_VAL 0x00000077
|
|
|
|
|
|
|
|
#define EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS 1200
|
|
|
|
|
2012-04-27 19:24:04 +07:00
|
|
|
/* Registers offset */
|
|
|
|
#define EMIF_MODULE_ID_AND_REVISION 0x0000
|
|
|
|
#define EMIF_STATUS 0x0004
|
|
|
|
#define EMIF_SDRAM_CONFIG 0x0008
|
|
|
|
#define EMIF_SDRAM_CONFIG_2 0x000c
|
|
|
|
#define EMIF_SDRAM_REFRESH_CONTROL 0x0010
|
|
|
|
#define EMIF_SDRAM_REFRESH_CTRL_SHDW 0x0014
|
|
|
|
#define EMIF_SDRAM_TIMING_1 0x0018
|
|
|
|
#define EMIF_SDRAM_TIMING_1_SHDW 0x001c
|
|
|
|
#define EMIF_SDRAM_TIMING_2 0x0020
|
|
|
|
#define EMIF_SDRAM_TIMING_2_SHDW 0x0024
|
|
|
|
#define EMIF_SDRAM_TIMING_3 0x0028
|
|
|
|
#define EMIF_SDRAM_TIMING_3_SHDW 0x002c
|
|
|
|
#define EMIF_LPDDR2_NVM_TIMING 0x0030
|
|
|
|
#define EMIF_LPDDR2_NVM_TIMING_SHDW 0x0034
|
|
|
|
#define EMIF_POWER_MANAGEMENT_CONTROL 0x0038
|
|
|
|
#define EMIF_POWER_MANAGEMENT_CTRL_SHDW 0x003c
|
|
|
|
#define EMIF_LPDDR2_MODE_REG_DATA 0x0040
|
|
|
|
#define EMIF_LPDDR2_MODE_REG_CONFIG 0x0050
|
|
|
|
#define EMIF_OCP_CONFIG 0x0054
|
|
|
|
#define EMIF_OCP_CONFIG_VALUE_1 0x0058
|
|
|
|
#define EMIF_OCP_CONFIG_VALUE_2 0x005c
|
|
|
|
#define EMIF_IODFT_TEST_LOGIC_GLOBAL_CONTROL 0x0060
|
|
|
|
#define EMIF_IODFT_TEST_LOGIC_CTRL_MISR_RESULT 0x0064
|
|
|
|
#define EMIF_IODFT_TEST_LOGIC_ADDRESS_MISR_RESULT 0x0068
|
|
|
|
#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_1 0x006c
|
|
|
|
#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_2 0x0070
|
|
|
|
#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_3 0x0074
|
|
|
|
#define EMIF_PERFORMANCE_COUNTER_1 0x0080
|
|
|
|
#define EMIF_PERFORMANCE_COUNTER_2 0x0084
|
|
|
|
#define EMIF_PERFORMANCE_COUNTER_CONFIG 0x0088
|
|
|
|
#define EMIF_PERFORMANCE_COUNTER_MASTER_REGION_SELECT 0x008c
|
|
|
|
#define EMIF_PERFORMANCE_COUNTER_TIME 0x0090
|
|
|
|
#define EMIF_MISC_REG 0x0094
|
|
|
|
#define EMIF_DLL_CALIB_CTRL 0x0098
|
|
|
|
#define EMIF_DLL_CALIB_CTRL_SHDW 0x009c
|
|
|
|
#define EMIF_END_OF_INTERRUPT 0x00a0
|
|
|
|
#define EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS 0x00a4
|
|
|
|
#define EMIF_LL_OCP_INTERRUPT_RAW_STATUS 0x00a8
|
|
|
|
#define EMIF_SYSTEM_OCP_INTERRUPT_STATUS 0x00ac
|
|
|
|
#define EMIF_LL_OCP_INTERRUPT_STATUS 0x00b0
|
|
|
|
#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET 0x00b4
|
|
|
|
#define EMIF_LL_OCP_INTERRUPT_ENABLE_SET 0x00b8
|
|
|
|
#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR 0x00bc
|
|
|
|
#define EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR 0x00c0
|
|
|
|
#define EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG 0x00c8
|
|
|
|
#define EMIF_TEMPERATURE_ALERT_CONFIG 0x00cc
|
|
|
|
#define EMIF_OCP_ERROR_LOG 0x00d0
|
|
|
|
#define EMIF_READ_WRITE_LEVELING_RAMP_WINDOW 0x00d4
|
|
|
|
#define EMIF_READ_WRITE_LEVELING_RAMP_CONTROL 0x00d8
|
|
|
|
#define EMIF_READ_WRITE_LEVELING_CONTROL 0x00dc
|
|
|
|
#define EMIF_DDR_PHY_CTRL_1 0x00e4
|
|
|
|
#define EMIF_DDR_PHY_CTRL_1_SHDW 0x00e8
|
|
|
|
#define EMIF_DDR_PHY_CTRL_2 0x00ec
|
|
|
|
#define EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING 0x0100
|
|
|
|
#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING 0x0104
|
|
|
|
#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING 0x0108
|
|
|
|
#define EMIF_READ_WRITE_EXECUTION_THRESHOLD 0x0120
|
|
|
|
#define EMIF_COS_CONFIG 0x0124
|
|
|
|
#define EMIF_PHY_STATUS_1 0x0140
|
|
|
|
#define EMIF_PHY_STATUS_2 0x0144
|
|
|
|
#define EMIF_PHY_STATUS_3 0x0148
|
|
|
|
#define EMIF_PHY_STATUS_4 0x014c
|
|
|
|
#define EMIF_PHY_STATUS_5 0x0150
|
|
|
|
#define EMIF_PHY_STATUS_6 0x0154
|
|
|
|
#define EMIF_PHY_STATUS_7 0x0158
|
|
|
|
#define EMIF_PHY_STATUS_8 0x015c
|
|
|
|
#define EMIF_PHY_STATUS_9 0x0160
|
|
|
|
#define EMIF_PHY_STATUS_10 0x0164
|
|
|
|
#define EMIF_PHY_STATUS_11 0x0168
|
|
|
|
#define EMIF_PHY_STATUS_12 0x016c
|
|
|
|
#define EMIF_PHY_STATUS_13 0x0170
|
|
|
|
#define EMIF_PHY_STATUS_14 0x0174
|
|
|
|
#define EMIF_PHY_STATUS_15 0x0178
|
|
|
|
#define EMIF_PHY_STATUS_16 0x017c
|
|
|
|
#define EMIF_PHY_STATUS_17 0x0180
|
|
|
|
#define EMIF_PHY_STATUS_18 0x0184
|
|
|
|
#define EMIF_PHY_STATUS_19 0x0188
|
|
|
|
#define EMIF_PHY_STATUS_20 0x018c
|
|
|
|
#define EMIF_PHY_STATUS_21 0x0190
|
|
|
|
#define EMIF_EXT_PHY_CTRL_1 0x0200
|
|
|
|
#define EMIF_EXT_PHY_CTRL_1_SHDW 0x0204
|
|
|
|
#define EMIF_EXT_PHY_CTRL_2 0x0208
|
|
|
|
#define EMIF_EXT_PHY_CTRL_2_SHDW 0x020c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_3 0x0210
|
|
|
|
#define EMIF_EXT_PHY_CTRL_3_SHDW 0x0214
|
|
|
|
#define EMIF_EXT_PHY_CTRL_4 0x0218
|
|
|
|
#define EMIF_EXT_PHY_CTRL_4_SHDW 0x021c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_5 0x0220
|
|
|
|
#define EMIF_EXT_PHY_CTRL_5_SHDW 0x0224
|
|
|
|
#define EMIF_EXT_PHY_CTRL_6 0x0228
|
|
|
|
#define EMIF_EXT_PHY_CTRL_6_SHDW 0x022c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_7 0x0230
|
|
|
|
#define EMIF_EXT_PHY_CTRL_7_SHDW 0x0234
|
|
|
|
#define EMIF_EXT_PHY_CTRL_8 0x0238
|
|
|
|
#define EMIF_EXT_PHY_CTRL_8_SHDW 0x023c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_9 0x0240
|
|
|
|
#define EMIF_EXT_PHY_CTRL_9_SHDW 0x0244
|
|
|
|
#define EMIF_EXT_PHY_CTRL_10 0x0248
|
|
|
|
#define EMIF_EXT_PHY_CTRL_10_SHDW 0x024c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_11 0x0250
|
|
|
|
#define EMIF_EXT_PHY_CTRL_11_SHDW 0x0254
|
|
|
|
#define EMIF_EXT_PHY_CTRL_12 0x0258
|
|
|
|
#define EMIF_EXT_PHY_CTRL_12_SHDW 0x025c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_13 0x0260
|
|
|
|
#define EMIF_EXT_PHY_CTRL_13_SHDW 0x0264
|
|
|
|
#define EMIF_EXT_PHY_CTRL_14 0x0268
|
|
|
|
#define EMIF_EXT_PHY_CTRL_14_SHDW 0x026c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_15 0x0270
|
|
|
|
#define EMIF_EXT_PHY_CTRL_15_SHDW 0x0274
|
|
|
|
#define EMIF_EXT_PHY_CTRL_16 0x0278
|
|
|
|
#define EMIF_EXT_PHY_CTRL_16_SHDW 0x027c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_17 0x0280
|
|
|
|
#define EMIF_EXT_PHY_CTRL_17_SHDW 0x0284
|
|
|
|
#define EMIF_EXT_PHY_CTRL_18 0x0288
|
|
|
|
#define EMIF_EXT_PHY_CTRL_18_SHDW 0x028c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_19 0x0290
|
|
|
|
#define EMIF_EXT_PHY_CTRL_19_SHDW 0x0294
|
|
|
|
#define EMIF_EXT_PHY_CTRL_20 0x0298
|
|
|
|
#define EMIF_EXT_PHY_CTRL_20_SHDW 0x029c
|
|
|
|
#define EMIF_EXT_PHY_CTRL_21 0x02a0
|
|
|
|
#define EMIF_EXT_PHY_CTRL_21_SHDW 0x02a4
|
|
|
|
#define EMIF_EXT_PHY_CTRL_22 0x02a8
|
|
|
|
#define EMIF_EXT_PHY_CTRL_22_SHDW 0x02ac
|
|
|
|
#define EMIF_EXT_PHY_CTRL_23 0x02b0
|
|
|
|
#define EMIF_EXT_PHY_CTRL_23_SHDW 0x02b4
|
|
|
|
#define EMIF_EXT_PHY_CTRL_24 0x02b8
|
|
|
|
#define EMIF_EXT_PHY_CTRL_24_SHDW 0x02bc
|
|
|
|
#define EMIF_EXT_PHY_CTRL_25 0x02c0
|
|
|
|
#define EMIF_EXT_PHY_CTRL_25_SHDW 0x02c4
|
|
|
|
#define EMIF_EXT_PHY_CTRL_26 0x02c8
|
|
|
|
#define EMIF_EXT_PHY_CTRL_26_SHDW 0x02cc
|
|
|
|
#define EMIF_EXT_PHY_CTRL_27 0x02d0
|
|
|
|
#define EMIF_EXT_PHY_CTRL_27_SHDW 0x02d4
|
|
|
|
#define EMIF_EXT_PHY_CTRL_28 0x02d8
|
|
|
|
#define EMIF_EXT_PHY_CTRL_28_SHDW 0x02dc
|
|
|
|
#define EMIF_EXT_PHY_CTRL_29 0x02e0
|
|
|
|
#define EMIF_EXT_PHY_CTRL_29_SHDW 0x02e4
|
|
|
|
#define EMIF_EXT_PHY_CTRL_30 0x02e8
|
|
|
|
#define EMIF_EXT_PHY_CTRL_30_SHDW 0x02ec
|
|
|
|
|
|
|
|
/* Registers shifts and masks */
|
|
|
|
|
|
|
|
/* EMIF_MODULE_ID_AND_REVISION */
|
|
|
|
#define SCHEME_SHIFT 30
|
|
|
|
#define SCHEME_MASK (0x3 << 30)
|
|
|
|
#define MODULE_ID_SHIFT 16
|
|
|
|
#define MODULE_ID_MASK (0xfff << 16)
|
|
|
|
#define RTL_VERSION_SHIFT 11
|
|
|
|
#define RTL_VERSION_MASK (0x1f << 11)
|
|
|
|
#define MAJOR_REVISION_SHIFT 8
|
|
|
|
#define MAJOR_REVISION_MASK (0x7 << 8)
|
|
|
|
#define MINOR_REVISION_SHIFT 0
|
|
|
|
#define MINOR_REVISION_MASK (0x3f << 0)
|
|
|
|
|
|
|
|
/* STATUS */
|
|
|
|
#define BE_SHIFT 31
|
|
|
|
#define BE_MASK (1 << 31)
|
|
|
|
#define DUAL_CLK_MODE_SHIFT 30
|
|
|
|
#define DUAL_CLK_MODE_MASK (1 << 30)
|
|
|
|
#define FAST_INIT_SHIFT 29
|
|
|
|
#define FAST_INIT_MASK (1 << 29)
|
|
|
|
#define RDLVLGATETO_SHIFT 6
|
|
|
|
#define RDLVLGATETO_MASK (1 << 6)
|
|
|
|
#define RDLVLTO_SHIFT 5
|
|
|
|
#define RDLVLTO_MASK (1 << 5)
|
|
|
|
#define WRLVLTO_SHIFT 4
|
|
|
|
#define WRLVLTO_MASK (1 << 4)
|
|
|
|
#define PHY_DLL_READY_SHIFT 2
|
|
|
|
#define PHY_DLL_READY_MASK (1 << 2)
|
|
|
|
|
|
|
|
/* SDRAM_CONFIG */
|
|
|
|
#define SDRAM_TYPE_SHIFT 29
|
|
|
|
#define SDRAM_TYPE_MASK (0x7 << 29)
|
|
|
|
#define IBANK_POS_SHIFT 27
|
|
|
|
#define IBANK_POS_MASK (0x3 << 27)
|
|
|
|
#define DDR_TERM_SHIFT 24
|
|
|
|
#define DDR_TERM_MASK (0x7 << 24)
|
|
|
|
#define DDR2_DDQS_SHIFT 23
|
|
|
|
#define DDR2_DDQS_MASK (1 << 23)
|
|
|
|
#define DYN_ODT_SHIFT 21
|
|
|
|
#define DYN_ODT_MASK (0x3 << 21)
|
|
|
|
#define DDR_DISABLE_DLL_SHIFT 20
|
|
|
|
#define DDR_DISABLE_DLL_MASK (1 << 20)
|
|
|
|
#define SDRAM_DRIVE_SHIFT 18
|
|
|
|
#define SDRAM_DRIVE_MASK (0x3 << 18)
|
|
|
|
#define CWL_SHIFT 16
|
|
|
|
#define CWL_MASK (0x3 << 16)
|
|
|
|
#define NARROW_MODE_SHIFT 14
|
|
|
|
#define NARROW_MODE_MASK (0x3 << 14)
|
|
|
|
#define CL_SHIFT 10
|
|
|
|
#define CL_MASK (0xf << 10)
|
|
|
|
#define ROWSIZE_SHIFT 7
|
|
|
|
#define ROWSIZE_MASK (0x7 << 7)
|
|
|
|
#define IBANK_SHIFT 4
|
|
|
|
#define IBANK_MASK (0x7 << 4)
|
|
|
|
#define EBANK_SHIFT 3
|
|
|
|
#define EBANK_MASK (1 << 3)
|
|
|
|
#define PAGESIZE_SHIFT 0
|
|
|
|
#define PAGESIZE_MASK (0x7 << 0)
|
|
|
|
|
|
|
|
/* SDRAM_CONFIG_2 */
|
|
|
|
#define CS1NVMEN_SHIFT 30
|
|
|
|
#define CS1NVMEN_MASK (1 << 30)
|
|
|
|
#define EBANK_POS_SHIFT 27
|
|
|
|
#define EBANK_POS_MASK (1 << 27)
|
|
|
|
#define RDBNUM_SHIFT 4
|
|
|
|
#define RDBNUM_MASK (0x3 << 4)
|
|
|
|
#define RDBSIZE_SHIFT 0
|
|
|
|
#define RDBSIZE_MASK (0x7 << 0)
|
|
|
|
|
|
|
|
/* SDRAM_REFRESH_CONTROL */
|
|
|
|
#define INITREF_DIS_SHIFT 31
|
|
|
|
#define INITREF_DIS_MASK (1 << 31)
|
|
|
|
#define SRT_SHIFT 29
|
|
|
|
#define SRT_MASK (1 << 29)
|
|
|
|
#define ASR_SHIFT 28
|
|
|
|
#define ASR_MASK (1 << 28)
|
|
|
|
#define PASR_SHIFT 24
|
|
|
|
#define PASR_MASK (0x7 << 24)
|
|
|
|
#define REFRESH_RATE_SHIFT 0
|
|
|
|
#define REFRESH_RATE_MASK (0xffff << 0)
|
|
|
|
|
|
|
|
/* SDRAM_TIMING_1 */
|
|
|
|
#define T_RTW_SHIFT 29
|
|
|
|
#define T_RTW_MASK (0x7 << 29)
|
|
|
|
#define T_RP_SHIFT 25
|
|
|
|
#define T_RP_MASK (0xf << 25)
|
|
|
|
#define T_RCD_SHIFT 21
|
|
|
|
#define T_RCD_MASK (0xf << 21)
|
|
|
|
#define T_WR_SHIFT 17
|
|
|
|
#define T_WR_MASK (0xf << 17)
|
|
|
|
#define T_RAS_SHIFT 12
|
|
|
|
#define T_RAS_MASK (0x1f << 12)
|
|
|
|
#define T_RC_SHIFT 6
|
|
|
|
#define T_RC_MASK (0x3f << 6)
|
|
|
|
#define T_RRD_SHIFT 3
|
|
|
|
#define T_RRD_MASK (0x7 << 3)
|
|
|
|
#define T_WTR_SHIFT 0
|
|
|
|
#define T_WTR_MASK (0x7 << 0)
|
|
|
|
|
|
|
|
/* SDRAM_TIMING_2 */
|
|
|
|
#define T_XP_SHIFT 28
|
|
|
|
#define T_XP_MASK (0x7 << 28)
|
|
|
|
#define T_ODT_SHIFT 25
|
|
|
|
#define T_ODT_MASK (0x7 << 25)
|
|
|
|
#define T_XSNR_SHIFT 16
|
|
|
|
#define T_XSNR_MASK (0x1ff << 16)
|
|
|
|
#define T_XSRD_SHIFT 6
|
|
|
|
#define T_XSRD_MASK (0x3ff << 6)
|
|
|
|
#define T_RTP_SHIFT 3
|
|
|
|
#define T_RTP_MASK (0x7 << 3)
|
|
|
|
#define T_CKE_SHIFT 0
|
|
|
|
#define T_CKE_MASK (0x7 << 0)
|
|
|
|
|
|
|
|
/* SDRAM_TIMING_3 */
|
|
|
|
#define T_PDLL_UL_SHIFT 28
|
|
|
|
#define T_PDLL_UL_MASK (0xf << 28)
|
|
|
|
#define T_CSTA_SHIFT 24
|
|
|
|
#define T_CSTA_MASK (0xf << 24)
|
|
|
|
#define T_CKESR_SHIFT 21
|
|
|
|
#define T_CKESR_MASK (0x7 << 21)
|
|
|
|
#define ZQ_ZQCS_SHIFT 15
|
|
|
|
#define ZQ_ZQCS_MASK (0x3f << 15)
|
|
|
|
#define T_TDQSCKMAX_SHIFT 13
|
|
|
|
#define T_TDQSCKMAX_MASK (0x3 << 13)
|
|
|
|
#define T_RFC_SHIFT 4
|
|
|
|
#define T_RFC_MASK (0x1ff << 4)
|
|
|
|
#define T_RAS_MAX_SHIFT 0
|
|
|
|
#define T_RAS_MAX_MASK (0xf << 0)
|
|
|
|
|
|
|
|
/* POWER_MANAGEMENT_CONTROL */
|
|
|
|
#define PD_TIM_SHIFT 12
|
|
|
|
#define PD_TIM_MASK (0xf << 12)
|
|
|
|
#define DPD_EN_SHIFT 11
|
|
|
|
#define DPD_EN_MASK (1 << 11)
|
|
|
|
#define LP_MODE_SHIFT 8
|
|
|
|
#define LP_MODE_MASK (0x7 << 8)
|
|
|
|
#define SR_TIM_SHIFT 4
|
|
|
|
#define SR_TIM_MASK (0xf << 4)
|
|
|
|
#define CS_TIM_SHIFT 0
|
|
|
|
#define CS_TIM_MASK (0xf << 0)
|
|
|
|
|
|
|
|
/* LPDDR2_MODE_REG_DATA */
|
|
|
|
#define VALUE_0_SHIFT 0
|
|
|
|
#define VALUE_0_MASK (0x7f << 0)
|
|
|
|
|
|
|
|
/* LPDDR2_MODE_REG_CONFIG */
|
|
|
|
#define CS_SHIFT 31
|
|
|
|
#define CS_MASK (1 << 31)
|
|
|
|
#define REFRESH_EN_SHIFT 30
|
|
|
|
#define REFRESH_EN_MASK (1 << 30)
|
|
|
|
#define ADDRESS_SHIFT 0
|
|
|
|
#define ADDRESS_MASK (0xff << 0)
|
|
|
|
|
|
|
|
/* OCP_CONFIG */
|
|
|
|
#define SYS_THRESH_MAX_SHIFT 24
|
|
|
|
#define SYS_THRESH_MAX_MASK (0xf << 24)
|
|
|
|
#define MPU_THRESH_MAX_SHIFT 20
|
|
|
|
#define MPU_THRESH_MAX_MASK (0xf << 20)
|
|
|
|
#define LL_THRESH_MAX_SHIFT 16
|
|
|
|
#define LL_THRESH_MAX_MASK (0xf << 16)
|
|
|
|
|
|
|
|
/* PERFORMANCE_COUNTER_1 */
|
|
|
|
#define COUNTER1_SHIFT 0
|
|
|
|
#define COUNTER1_MASK (0xffffffff << 0)
|
|
|
|
|
|
|
|
/* PERFORMANCE_COUNTER_2 */
|
|
|
|
#define COUNTER2_SHIFT 0
|
|
|
|
#define COUNTER2_MASK (0xffffffff << 0)
|
|
|
|
|
|
|
|
/* PERFORMANCE_COUNTER_CONFIG */
|
|
|
|
#define CNTR2_MCONNID_EN_SHIFT 31
|
|
|
|
#define CNTR2_MCONNID_EN_MASK (1 << 31)
|
|
|
|
#define CNTR2_REGION_EN_SHIFT 30
|
|
|
|
#define CNTR2_REGION_EN_MASK (1 << 30)
|
|
|
|
#define CNTR2_CFG_SHIFT 16
|
|
|
|
#define CNTR2_CFG_MASK (0xf << 16)
|
|
|
|
#define CNTR1_MCONNID_EN_SHIFT 15
|
|
|
|
#define CNTR1_MCONNID_EN_MASK (1 << 15)
|
|
|
|
#define CNTR1_REGION_EN_SHIFT 14
|
|
|
|
#define CNTR1_REGION_EN_MASK (1 << 14)
|
|
|
|
#define CNTR1_CFG_SHIFT 0
|
|
|
|
#define CNTR1_CFG_MASK (0xf << 0)
|
|
|
|
|
|
|
|
/* PERFORMANCE_COUNTER_MASTER_REGION_SELECT */
|
|
|
|
#define MCONNID2_SHIFT 24
|
|
|
|
#define MCONNID2_MASK (0xff << 24)
|
|
|
|
#define REGION_SEL2_SHIFT 16
|
|
|
|
#define REGION_SEL2_MASK (0x3 << 16)
|
|
|
|
#define MCONNID1_SHIFT 8
|
|
|
|
#define MCONNID1_MASK (0xff << 8)
|
|
|
|
#define REGION_SEL1_SHIFT 0
|
|
|
|
#define REGION_SEL1_MASK (0x3 << 0)
|
|
|
|
|
|
|
|
/* PERFORMANCE_COUNTER_TIME */
|
|
|
|
#define TOTAL_TIME_SHIFT 0
|
|
|
|
#define TOTAL_TIME_MASK (0xffffffff << 0)
|
|
|
|
|
|
|
|
/* DLL_CALIB_CTRL */
|
|
|
|
#define ACK_WAIT_SHIFT 16
|
|
|
|
#define ACK_WAIT_MASK (0xf << 16)
|
|
|
|
#define DLL_CALIB_INTERVAL_SHIFT 0
|
|
|
|
#define DLL_CALIB_INTERVAL_MASK (0x1ff << 0)
|
|
|
|
|
|
|
|
/* END_OF_INTERRUPT */
|
|
|
|
#define EOI_SHIFT 0
|
|
|
|
#define EOI_MASK (1 << 0)
|
|
|
|
|
|
|
|
/* SYSTEM_OCP_INTERRUPT_RAW_STATUS */
|
|
|
|
#define DNV_SYS_SHIFT 2
|
|
|
|
#define DNV_SYS_MASK (1 << 2)
|
|
|
|
#define TA_SYS_SHIFT 1
|
|
|
|
#define TA_SYS_MASK (1 << 1)
|
|
|
|
#define ERR_SYS_SHIFT 0
|
|
|
|
#define ERR_SYS_MASK (1 << 0)
|
|
|
|
|
|
|
|
/* LOW_LATENCY_OCP_INTERRUPT_RAW_STATUS */
|
|
|
|
#define DNV_LL_SHIFT 2
|
|
|
|
#define DNV_LL_MASK (1 << 2)
|
|
|
|
#define TA_LL_SHIFT 1
|
|
|
|
#define TA_LL_MASK (1 << 1)
|
|
|
|
#define ERR_LL_SHIFT 0
|
|
|
|
#define ERR_LL_MASK (1 << 0)
|
|
|
|
|
|
|
|
/* SYSTEM_OCP_INTERRUPT_ENABLE_SET */
|
|
|
|
#define EN_DNV_SYS_SHIFT 2
|
|
|
|
#define EN_DNV_SYS_MASK (1 << 2)
|
|
|
|
#define EN_TA_SYS_SHIFT 1
|
|
|
|
#define EN_TA_SYS_MASK (1 << 1)
|
|
|
|
#define EN_ERR_SYS_SHIFT 0
|
|
|
|
#define EN_ERR_SYS_MASK (1 << 0)
|
|
|
|
|
|
|
|
/* LOW_LATENCY_OCP_INTERRUPT_ENABLE_SET */
|
|
|
|
#define EN_DNV_LL_SHIFT 2
|
|
|
|
#define EN_DNV_LL_MASK (1 << 2)
|
|
|
|
#define EN_TA_LL_SHIFT 1
|
|
|
|
#define EN_TA_LL_MASK (1 << 1)
|
|
|
|
#define EN_ERR_LL_SHIFT 0
|
|
|
|
#define EN_ERR_LL_MASK (1 << 0)
|
|
|
|
|
|
|
|
/* SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG */
|
|
|
|
#define ZQ_CS1EN_SHIFT 31
|
|
|
|
#define ZQ_CS1EN_MASK (1 << 31)
|
|
|
|
#define ZQ_CS0EN_SHIFT 30
|
|
|
|
#define ZQ_CS0EN_MASK (1 << 30)
|
|
|
|
#define ZQ_DUALCALEN_SHIFT 29
|
|
|
|
#define ZQ_DUALCALEN_MASK (1 << 29)
|
|
|
|
#define ZQ_SFEXITEN_SHIFT 28
|
|
|
|
#define ZQ_SFEXITEN_MASK (1 << 28)
|
|
|
|
#define ZQ_ZQINIT_MULT_SHIFT 18
|
|
|
|
#define ZQ_ZQINIT_MULT_MASK (0x3 << 18)
|
|
|
|
#define ZQ_ZQCL_MULT_SHIFT 16
|
|
|
|
#define ZQ_ZQCL_MULT_MASK (0x3 << 16)
|
|
|
|
#define ZQ_REFINTERVAL_SHIFT 0
|
|
|
|
#define ZQ_REFINTERVAL_MASK (0xffff << 0)
|
|
|
|
|
|
|
|
/* TEMPERATURE_ALERT_CONFIG */
|
|
|
|
#define TA_CS1EN_SHIFT 31
|
|
|
|
#define TA_CS1EN_MASK (1 << 31)
|
|
|
|
#define TA_CS0EN_SHIFT 30
|
|
|
|
#define TA_CS0EN_MASK (1 << 30)
|
|
|
|
#define TA_SFEXITEN_SHIFT 28
|
|
|
|
#define TA_SFEXITEN_MASK (1 << 28)
|
|
|
|
#define TA_DEVWDT_SHIFT 26
|
|
|
|
#define TA_DEVWDT_MASK (0x3 << 26)
|
|
|
|
#define TA_DEVCNT_SHIFT 24
|
|
|
|
#define TA_DEVCNT_MASK (0x3 << 24)
|
|
|
|
#define TA_REFINTERVAL_SHIFT 0
|
|
|
|
#define TA_REFINTERVAL_MASK (0x3fffff << 0)
|
|
|
|
|
|
|
|
/* OCP_ERROR_LOG */
|
|
|
|
#define MADDRSPACE_SHIFT 14
|
|
|
|
#define MADDRSPACE_MASK (0x3 << 14)
|
|
|
|
#define MBURSTSEQ_SHIFT 11
|
|
|
|
#define MBURSTSEQ_MASK (0x7 << 11)
|
|
|
|
#define MCMD_SHIFT 8
|
|
|
|
#define MCMD_MASK (0x7 << 8)
|
|
|
|
#define MCONNID_SHIFT 0
|
|
|
|
#define MCONNID_MASK (0xff << 0)
|
|
|
|
|
2019-04-02 23:57:42 +07:00
|
|
|
/* READ_WRITE_LEVELING_CONTROL */
|
|
|
|
#define RDWRLVLFULL_START 0x80000000
|
|
|
|
|
2012-04-27 19:24:04 +07:00
|
|
|
/* DDR_PHY_CTRL_1 - EMIF4D */
|
|
|
|
#define DLL_SLAVE_DLY_CTRL_SHIFT_4D 4
|
|
|
|
#define DLL_SLAVE_DLY_CTRL_MASK_4D (0xFF << 4)
|
|
|
|
#define READ_LATENCY_SHIFT_4D 0
|
|
|
|
#define READ_LATENCY_MASK_4D (0xf << 0)
|
|
|
|
|
|
|
|
/* DDR_PHY_CTRL_1 - EMIF4D5 */
|
|
|
|
#define DLL_HALF_DELAY_SHIFT_4D5 21
|
|
|
|
#define DLL_HALF_DELAY_MASK_4D5 (1 << 21)
|
|
|
|
#define READ_LATENCY_SHIFT_4D5 0
|
|
|
|
#define READ_LATENCY_MASK_4D5 (0x1f << 0)
|
|
|
|
|
|
|
|
/* DDR_PHY_CTRL_1_SHDW */
|
|
|
|
#define DDR_PHY_CTRL_1_SHDW_SHIFT 5
|
|
|
|
#define DDR_PHY_CTRL_1_SHDW_MASK (0x7ffffff << 5)
|
|
|
|
#define READ_LATENCY_SHDW_SHIFT 0
|
|
|
|
#define READ_LATENCY_SHDW_MASK (0x1f << 0)
|
|
|
|
|
memory: ti-emif-sram: introduce relocatable suspend/resume handlers
Certain SoCs like Texas Instruments AM335x and AM437x require parts
of the EMIF PM code to run late in the suspend sequence from SRAM,
such as saving and restoring the EMIF context and placing the memory
into self-refresh.
One requirement for these SoCs to suspend and enter its lowest power
mode, called DeepSleep0, is that the PER power domain must be shut off.
Because the EMIF (DDR Controller) resides within this power domain, it
will lose context during a suspend operation, so we must save it so we
can restore once we resume. However, we cannot execute this code from
external memory, as it is not available at this point, so the code must
be executed late in the suspend path from SRAM.
This patch introduces a ti-emif-sram driver that includes several
functions written in ARM ASM that are relocatable so the PM SRAM
code can use them. It also allocates a region of writable SRAM to
be used by the code running in the executable region of SRAM to save
and restore the EMIF context. It can export a table containing the
absolute addresses of the available PM functions so that other SRAM
code can branch to them. This code is required for suspend/resume on
AM335x and AM437x to work.
In addition to this, to be able to share data structures between C and
the ti-emif-sram-pm assembly code, we can automatically generate all of
the C struct member offsets and sizes as macros by processing
emif-asm-offsets.c into assembly code and then extracting the relevant
data as is done for the generated platform asm-offsets.h files.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-06-18 02:52:10 +07:00
|
|
|
#define EMIF_SRAM_AM33_REG_LAYOUT 0x00000000
|
|
|
|
#define EMIF_SRAM_AM43_REG_LAYOUT 0x00000001
|
|
|
|
|
2012-04-27 19:24:06 +07:00
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
/*
|
|
|
|
* Structure containing shadow of important registers in EMIF
|
|
|
|
* The calculation function fills in this structure to be later used for
|
|
|
|
* initialisation and DVFS
|
|
|
|
*/
|
|
|
|
struct emif_regs {
|
|
|
|
u32 freq;
|
|
|
|
u32 ref_ctrl_shdw;
|
|
|
|
u32 ref_ctrl_shdw_derated;
|
|
|
|
u32 sdram_tim1_shdw;
|
|
|
|
u32 sdram_tim1_shdw_derated;
|
|
|
|
u32 sdram_tim2_shdw;
|
|
|
|
u32 sdram_tim3_shdw;
|
|
|
|
u32 sdram_tim3_shdw_derated;
|
|
|
|
u32 pwr_mgmt_ctrl_shdw;
|
|
|
|
union {
|
|
|
|
u32 read_idle_ctrl_shdw_normal;
|
|
|
|
u32 dll_calib_ctrl_shdw_normal;
|
|
|
|
};
|
|
|
|
union {
|
|
|
|
u32 read_idle_ctrl_shdw_volt_ramp;
|
|
|
|
u32 dll_calib_ctrl_shdw_volt_ramp;
|
|
|
|
};
|
|
|
|
|
|
|
|
u32 phy_ctrl_1_shdw;
|
|
|
|
u32 ext_phy_ctrl_2_shdw;
|
|
|
|
u32 ext_phy_ctrl_3_shdw;
|
|
|
|
u32 ext_phy_ctrl_4_shdw;
|
|
|
|
};
|
memory: ti-emif-sram: introduce relocatable suspend/resume handlers
Certain SoCs like Texas Instruments AM335x and AM437x require parts
of the EMIF PM code to run late in the suspend sequence from SRAM,
such as saving and restoring the EMIF context and placing the memory
into self-refresh.
One requirement for these SoCs to suspend and enter its lowest power
mode, called DeepSleep0, is that the PER power domain must be shut off.
Because the EMIF (DDR Controller) resides within this power domain, it
will lose context during a suspend operation, so we must save it so we
can restore once we resume. However, we cannot execute this code from
external memory, as it is not available at this point, so the code must
be executed late in the suspend path from SRAM.
This patch introduces a ti-emif-sram driver that includes several
functions written in ARM ASM that are relocatable so the PM SRAM
code can use them. It also allocates a region of writable SRAM to
be used by the code running in the executable region of SRAM to save
and restore the EMIF context. It can export a table containing the
absolute addresses of the available PM functions so that other SRAM
code can branch to them. This code is required for suspend/resume on
AM335x and AM437x to work.
In addition to this, to be able to share data structures between C and
the ti-emif-sram-pm assembly code, we can automatically generate all of
the C struct member offsets and sizes as macros by processing
emif-asm-offsets.c into assembly code and then extracting the relevant
data as is done for the generated platform asm-offsets.h files.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-06-18 02:52:10 +07:00
|
|
|
|
|
|
|
struct ti_emif_pm_functions;
|
|
|
|
|
|
|
|
extern unsigned int ti_emif_sram;
|
|
|
|
extern unsigned int ti_emif_sram_sz;
|
|
|
|
extern struct ti_emif_pm_data ti_emif_pm_sram_data;
|
|
|
|
extern struct emif_regs_amx3 ti_emif_regs_amx3;
|
|
|
|
|
|
|
|
void ti_emif_save_context(void);
|
|
|
|
void ti_emif_restore_context(void);
|
2019-04-02 23:57:42 +07:00
|
|
|
void ti_emif_run_hw_leveling(void);
|
memory: ti-emif-sram: introduce relocatable suspend/resume handlers
Certain SoCs like Texas Instruments AM335x and AM437x require parts
of the EMIF PM code to run late in the suspend sequence from SRAM,
such as saving and restoring the EMIF context and placing the memory
into self-refresh.
One requirement for these SoCs to suspend and enter its lowest power
mode, called DeepSleep0, is that the PER power domain must be shut off.
Because the EMIF (DDR Controller) resides within this power domain, it
will lose context during a suspend operation, so we must save it so we
can restore once we resume. However, we cannot execute this code from
external memory, as it is not available at this point, so the code must
be executed late in the suspend path from SRAM.
This patch introduces a ti-emif-sram driver that includes several
functions written in ARM ASM that are relocatable so the PM SRAM
code can use them. It also allocates a region of writable SRAM to
be used by the code running in the executable region of SRAM to save
and restore the EMIF context. It can export a table containing the
absolute addresses of the available PM functions so that other SRAM
code can branch to them. This code is required for suspend/resume on
AM335x and AM437x to work.
In addition to this, to be able to share data structures between C and
the ti-emif-sram-pm assembly code, we can automatically generate all of
the C struct member offsets and sizes as macros by processing
emif-asm-offsets.c into assembly code and then extracting the relevant
data as is done for the generated platform asm-offsets.h files.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-06-18 02:52:10 +07:00
|
|
|
void ti_emif_enter_sr(void);
|
|
|
|
void ti_emif_exit_sr(void);
|
|
|
|
void ti_emif_abort_sr(void);
|
|
|
|
|
2012-04-27 19:24:06 +07:00
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
#endif /* __EMIF_H */
|