linux_dsm_epyc7002/drivers/net/s2io.h

821 lines
22 KiB
C
Raw Normal View History

/************************************************************************
* s2io.h: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC
* Copyright(c) 2002-2005 Neterion Inc.
* This software may be used and distributed according to the terms of
* the GNU General Public License (GPL), incorporated herein by reference.
* Drivers based on or derived from this code fall under the GPL and must
* retain the authorship, copyright and license notice. This file is not
* a complete program and may only be used when the entire operating
* system is licensed under the GPL.
* See the file COPYING in this distribution for more information.
************************************************************************/
#ifndef _S2IO_H
#define _S2IO_H
#define TBD 0
#define BIT(loc) (0x8000000000000000ULL >> (loc))
#define vBIT(val, loc, sz) (((u64)val) << (64-loc-sz))
#define INV(d) ((d&0xff)<<24) | (((d>>8)&0xff)<<16) | (((d>>16)&0xff)<<8)| ((d>>24)&0xff)
#ifndef BOOL
#define BOOL int
#endif
#ifndef TRUE
#define TRUE 1
#define FALSE 0
#endif
#undef SUCCESS
#define SUCCESS 0
#define FAILURE -1
/* Maximum time to flicker LED when asked to identify NIC using ethtool */
#define MAX_FLICKER_TIME 60000 /* 60 Secs */
/* Maximum outstanding splits to be configured into xena. */
typedef enum xena_max_outstanding_splits {
XENA_ONE_SPLIT_TRANSACTION = 0,
XENA_TWO_SPLIT_TRANSACTION = 1,
XENA_THREE_SPLIT_TRANSACTION = 2,
XENA_FOUR_SPLIT_TRANSACTION = 3,
XENA_EIGHT_SPLIT_TRANSACTION = 4,
XENA_TWELVE_SPLIT_TRANSACTION = 5,
XENA_SIXTEEN_SPLIT_TRANSACTION = 6,
XENA_THIRTYTWO_SPLIT_TRANSACTION = 7
} xena_max_outstanding_splits;
#define XENA_MAX_OUTSTANDING_SPLITS(n) (n << 4)
/* OS concerned variables and constants */
#define WATCH_DOG_TIMEOUT 15*HZ
#define EFILL 0x1234
#define ALIGN_SIZE 127
#define PCIX_COMMAND_REGISTER 0x62
/*
* Debug related variables.
*/
/* different debug levels. */
#define ERR_DBG 0
#define INIT_DBG 1
#define INFO_DBG 2
#define TX_DBG 3
#define INTR_DBG 4
/* Global variable that defines the present debug level of the driver. */
int debug_level = ERR_DBG; /* Default level. */
/* DEBUG message print. */
#define DBG_PRINT(dbg_level, args...) if(!(debug_level<dbg_level)) printk(args)
/* Protocol assist features of the NIC */
#define L3_CKSUM_OK 0xFFFF
#define L4_CKSUM_OK 0xFFFF
#define S2IO_JUMBO_SIZE 9600
/* Driver statistics maintained by driver */
typedef struct {
unsigned long long single_ecc_errs;
unsigned long long double_ecc_errs;
} swStat_t;
/* The statistics block of Xena */
typedef struct stat_block {
/* Tx MAC statistics counters. */
u32 tmac_data_octets;
u32 tmac_frms;
u64 tmac_drop_frms;
u32 tmac_bcst_frms;
u32 tmac_mcst_frms;
u64 tmac_pause_ctrl_frms;
u32 tmac_ucst_frms;
u32 tmac_ttl_octets;
u32 tmac_any_err_frms;
u32 tmac_nucst_frms;
u64 tmac_ttl_less_fb_octets;
u64 tmac_vld_ip_octets;
u32 tmac_drop_ip;
u32 tmac_vld_ip;
u32 tmac_rst_tcp;
u32 tmac_icmp;
u64 tmac_tcp;
u32 reserved_0;
u32 tmac_udp;
/* Rx MAC Statistics counters. */
u32 rmac_data_octets;
u32 rmac_vld_frms;
u64 rmac_fcs_err_frms;
u64 rmac_drop_frms;
u32 rmac_vld_bcst_frms;
u32 rmac_vld_mcst_frms;
u32 rmac_out_rng_len_err_frms;
u32 rmac_in_rng_len_err_frms;
u64 rmac_long_frms;
u64 rmac_pause_ctrl_frms;
u64 rmac_unsup_ctrl_frms;
u32 rmac_accepted_ucst_frms;
u32 rmac_ttl_octets;
u32 rmac_discarded_frms;
u32 rmac_accepted_nucst_frms;
u32 reserved_1;
u32 rmac_drop_events;
u64 rmac_ttl_less_fb_octets;
u64 rmac_ttl_frms;
u64 reserved_2;
u32 rmac_usized_frms;
u32 reserved_3;
u32 rmac_frag_frms;
u32 rmac_osized_frms;
u32 reserved_4;
u32 rmac_jabber_frms;
u64 rmac_ttl_64_frms;
u64 rmac_ttl_65_127_frms;
u64 reserved_5;
u64 rmac_ttl_128_255_frms;
u64 rmac_ttl_256_511_frms;
u64 reserved_6;
u64 rmac_ttl_512_1023_frms;
u64 rmac_ttl_1024_1518_frms;
u32 rmac_ip;
u32 reserved_7;
u64 rmac_ip_octets;
u32 rmac_drop_ip;
u32 rmac_hdr_err_ip;
u32 reserved_8;
u32 rmac_icmp;
u64 rmac_tcp;
u32 rmac_err_drp_udp;
u32 rmac_udp;
u64 rmac_xgmii_err_sym;
u64 rmac_frms_q0;
u64 rmac_frms_q1;
u64 rmac_frms_q2;
u64 rmac_frms_q3;
u64 rmac_frms_q4;
u64 rmac_frms_q5;
u64 rmac_frms_q6;
u64 rmac_frms_q7;
u16 rmac_full_q3;
u16 rmac_full_q2;
u16 rmac_full_q1;
u16 rmac_full_q0;
u16 rmac_full_q7;
u16 rmac_full_q6;
u16 rmac_full_q5;
u16 rmac_full_q4;
u32 reserved_9;
u32 rmac_pause_cnt;
u64 rmac_xgmii_data_err_cnt;
u64 rmac_xgmii_ctrl_err_cnt;
u32 rmac_err_tcp;
u32 rmac_accepted_ip;
/* PCI/PCI-X Read transaction statistics. */
u32 new_rd_req_cnt;
u32 rd_req_cnt;
u32 rd_rtry_cnt;
u32 new_rd_req_rtry_cnt;
/* PCI/PCI-X Write/Read transaction statistics. */
u32 wr_req_cnt;
u32 wr_rtry_rd_ack_cnt;
u32 new_wr_req_rtry_cnt;
u32 new_wr_req_cnt;
u32 wr_disc_cnt;
u32 wr_rtry_cnt;
/* PCI/PCI-X Write / DMA Transaction statistics. */
u32 txp_wr_cnt;
u32 rd_rtry_wr_ack_cnt;
u32 txd_wr_cnt;
u32 txd_rd_cnt;
u32 rxd_wr_cnt;
u32 rxd_rd_cnt;
u32 rxf_wr_cnt;
u32 txf_rd_cnt;
} StatInfo_t;
/*
* Structures representing different init time configuration
* parameters of the NIC.
*/
#define MAX_TX_FIFOS 8
#define MAX_RX_RINGS 8
/* FIFO mappings for all possible number of fifos configured */
int fifo_map[][MAX_TX_FIFOS] = {
{0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 1, 1, 1, 1},
{0, 0, 0, 1, 1, 1, 2, 2},
{0, 0, 1, 1, 2, 2, 3, 3},
{0, 0, 1, 1, 2, 2, 3, 4},
{0, 0, 1, 1, 2, 3, 4, 5},
{0, 0, 1, 2, 3, 4, 5, 6},
{0, 1, 2, 3, 4, 5, 6, 7},
};
/* Maintains Per FIFO related information. */
typedef struct tx_fifo_config {
#define MAX_AVAILABLE_TXDS 8192
u32 fifo_len; /* specifies len of FIFO upto 8192, ie no of TxDLs */
/* Priority definition */
#define TX_FIFO_PRI_0 0 /*Highest */
#define TX_FIFO_PRI_1 1
#define TX_FIFO_PRI_2 2
#define TX_FIFO_PRI_3 3
#define TX_FIFO_PRI_4 4
#define TX_FIFO_PRI_5 5
#define TX_FIFO_PRI_6 6
#define TX_FIFO_PRI_7 7 /*lowest */
u8 fifo_priority; /* specifies pointer level for FIFO */
/* user should not set twos fifos with same pri */
u8 f_no_snoop;
#define NO_SNOOP_TXD 0x01
#define NO_SNOOP_TXD_BUFFER 0x02
} tx_fifo_config_t;
/* Maintains per Ring related information */
typedef struct rx_ring_config {
u32 num_rxd; /*No of RxDs per Rx Ring */
#define RX_RING_PRI_0 0 /* highest */
#define RX_RING_PRI_1 1
#define RX_RING_PRI_2 2
#define RX_RING_PRI_3 3
#define RX_RING_PRI_4 4
#define RX_RING_PRI_5 5
#define RX_RING_PRI_6 6
#define RX_RING_PRI_7 7 /* lowest */
u8 ring_priority; /*Specifies service priority of ring */
/* OSM should not set any two rings with same priority */
u8 ring_org; /*Organization of ring */
#define RING_ORG_BUFF1 0x01
#define RX_RING_ORG_BUFF3 0x03
#define RX_RING_ORG_BUFF5 0x05
u8 f_no_snoop;
#define NO_SNOOP_RXD 0x01
#define NO_SNOOP_RXD_BUFFER 0x02
} rx_ring_config_t;
/* This structure provides contains values of the tunable parameters
* of the H/W
*/
struct config_param {
/* Tx Side */
u32 tx_fifo_num; /*Number of Tx FIFOs */
u8 fifo_mapping[MAX_TX_FIFOS];
tx_fifo_config_t tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */
u32 max_txds; /*Max no. of Tx buffer descriptor per TxDL */
u64 tx_intr_type;
/* Specifies if Tx Intr is UTILZ or PER_LIST type. */
/* Rx Side */
u32 rx_ring_num; /*Number of receive rings */
#define MAX_RX_BLOCKS_PER_RING 150
rx_ring_config_t rx_cfg[MAX_RX_RINGS]; /*Per-Rx Ring config */
#define HEADER_ETHERNET_II_802_3_SIZE 14
#define HEADER_802_2_SIZE 3
#define HEADER_SNAP_SIZE 5
#define HEADER_VLAN_SIZE 4
#define MIN_MTU 46
#define MAX_PYLD 1500
#define MAX_MTU (MAX_PYLD+18)
#define MAX_MTU_VLAN (MAX_PYLD+22)
#define MAX_PYLD_JUMBO 9600
#define MAX_MTU_JUMBO (MAX_PYLD_JUMBO+18)
#define MAX_MTU_JUMBO_VLAN (MAX_PYLD_JUMBO+22)
u16 bus_speed;
};
/* Structure representing MAC Addrs */
typedef struct mac_addr {
u8 mac_addr[ETH_ALEN];
} macaddr_t;
/* Structure that represent every FIFO element in the BAR1
* Address location.
*/
typedef struct _TxFIFO_element {
u64 TxDL_Pointer;
u64 List_Control;
#define TX_FIFO_LAST_TXD_NUM( val) vBIT(val,0,8)
#define TX_FIFO_FIRST_LIST BIT(14)
#define TX_FIFO_LAST_LIST BIT(15)
#define TX_FIFO_FIRSTNLAST_LIST vBIT(3,14,2)
#define TX_FIFO_SPECIAL_FUNC BIT(23)
#define TX_FIFO_DS_NO_SNOOP BIT(31)
#define TX_FIFO_BUFF_NO_SNOOP BIT(30)
} TxFIFO_element_t;
/* Tx descriptor structure */
typedef struct _TxD {
u64 Control_1;
/* bit mask */
#define TXD_LIST_OWN_XENA BIT(7)
#define TXD_T_CODE (BIT(12)|BIT(13)|BIT(14)|BIT(15))
#define TXD_T_CODE_OK(val) (|(val & TXD_T_CODE))
#define GET_TXD_T_CODE(val) ((val & TXD_T_CODE)<<12)
#define TXD_GATHER_CODE (BIT(22) | BIT(23))
#define TXD_GATHER_CODE_FIRST BIT(22)
#define TXD_GATHER_CODE_LAST BIT(23)
#define TXD_TCP_LSO_EN BIT(30)
#define TXD_UDP_COF_EN BIT(31)
#define TXD_TCP_LSO_MSS(val) vBIT(val,34,14)
#define TXD_BUFFER0_SIZE(val) vBIT(val,48,16)
u64 Control_2;
#define TXD_TX_CKO_CONTROL (BIT(5)|BIT(6)|BIT(7))
#define TXD_TX_CKO_IPV4_EN BIT(5)
#define TXD_TX_CKO_TCP_EN BIT(6)
#define TXD_TX_CKO_UDP_EN BIT(7)
#define TXD_VLAN_ENABLE BIT(15)
#define TXD_VLAN_TAG(val) vBIT(val,16,16)
#define TXD_INT_NUMBER(val) vBIT(val,34,6)
#define TXD_INT_TYPE_PER_LIST BIT(47)
#define TXD_INT_TYPE_UTILZ BIT(46)
#define TXD_SET_MARKER vBIT(0x6,0,4)
u64 Buffer_Pointer;
u64 Host_Control; /* reserved for host */
} TxD_t;
/* Structure to hold the phy and virt addr of every TxDL. */
typedef struct list_info_hold {
dma_addr_t list_phy_addr;
void *list_virt_addr;
} list_info_hold_t;
/* Rx descriptor structure */
typedef struct _RxD_t {
u64 Host_Control; /* reserved for host */
u64 Control_1;
#define RXD_OWN_XENA BIT(7)
#define RXD_T_CODE (BIT(12)|BIT(13)|BIT(14)|BIT(15))
#define RXD_FRAME_PROTO vBIT(0xFFFF,24,8)
#define RXD_FRAME_PROTO_IPV4 BIT(27)
#define RXD_FRAME_PROTO_IPV6 BIT(28)
#define RXD_FRAME_IP_FRAG BIT(29)
#define RXD_FRAME_PROTO_TCP BIT(30)
#define RXD_FRAME_PROTO_UDP BIT(31)
#define TCP_OR_UDP_FRAME (RXD_FRAME_PROTO_TCP | RXD_FRAME_PROTO_UDP)
#define RXD_GET_L3_CKSUM(val) ((u16)(val>> 16) & 0xFFFF)
#define RXD_GET_L4_CKSUM(val) ((u16)(val) & 0xFFFF)
u64 Control_2;
#define THE_RXD_MARK 0x3
#define SET_RXD_MARKER vBIT(THE_RXD_MARK, 0, 2)
#define GET_RXD_MARKER(ctrl) ((ctrl & SET_RXD_MARKER) >> 62)
#ifndef CONFIG_2BUFF_MODE
#define MASK_BUFFER0_SIZE vBIT(0x3FFF,2,14)
#define SET_BUFFER0_SIZE(val) vBIT(val,2,14)
#else
#define MASK_BUFFER0_SIZE vBIT(0xFF,2,14)
#define MASK_BUFFER1_SIZE vBIT(0xFFFF,16,16)
#define MASK_BUFFER2_SIZE vBIT(0xFFFF,32,16)
#define SET_BUFFER0_SIZE(val) vBIT(val,8,8)
#define SET_BUFFER1_SIZE(val) vBIT(val,16,16)
#define SET_BUFFER2_SIZE(val) vBIT(val,32,16)
#endif
#define MASK_VLAN_TAG vBIT(0xFFFF,48,16)
#define SET_VLAN_TAG(val) vBIT(val,48,16)
#define SET_NUM_TAG(val) vBIT(val,16,32)
#ifndef CONFIG_2BUFF_MODE
#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0x3FFF,2,14)))
#else
#define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \
>> 48)
#define RXD_GET_BUFFER1_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER1_SIZE) \
>> 32)
#define RXD_GET_BUFFER2_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER2_SIZE) \
>> 16)
#define BUF0_LEN 40
#define BUF1_LEN 1
#endif
u64 Buffer0_ptr;
#ifdef CONFIG_2BUFF_MODE
u64 Buffer1_ptr;
u64 Buffer2_ptr;
#endif
} RxD_t;
/* Structure that represents the Rx descriptor block which contains
* 128 Rx descriptors.
*/
#ifndef CONFIG_2BUFF_MODE
typedef struct _RxD_block {
#define MAX_RXDS_PER_BLOCK 127
RxD_t rxd[MAX_RXDS_PER_BLOCK];
u64 reserved_0;
#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL
u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last
* Rxd in this blk */
u64 reserved_2_pNext_RxD_block; /* Logical ptr to next */
u64 pNext_RxD_Blk_physical; /* Buff0_ptr.In a 32 bit arch
* the upper 32 bits should
* be 0 */
} RxD_block_t;
#else
typedef struct _RxD_block {
#define MAX_RXDS_PER_BLOCK 85
RxD_t rxd[MAX_RXDS_PER_BLOCK];
#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL
u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd
* in this blk */
u64 pNext_RxD_Blk_physical; /* Phy ponter to next blk. */
} RxD_block_t;
#define SIZE_OF_BLOCK 4096
/* Structure to hold virtual addresses of Buf0 and Buf1 in
* 2buf mode. */
typedef struct bufAdd {
void *ba_0_org;
void *ba_1_org;
void *ba_0;
void *ba_1;
} buffAdd_t;
#endif
/* Structure which stores all the MAC control parameters */
/* This structure stores the offset of the RxD in the ring
* from which the Rx Interrupt processor can start picking
* up the RxDs for processing.
*/
typedef struct _rx_curr_get_info_t {
u32 block_index;
u32 offset;
u32 ring_len;
} rx_curr_get_info_t;
typedef rx_curr_get_info_t rx_curr_put_info_t;
/* This structure stores the offset of the TxDl in the FIFO
* from which the Tx Interrupt processor can start picking
* up the TxDLs for send complete interrupt processing.
*/
typedef struct {
u32 offset;
u32 fifo_len;
} tx_curr_get_info_t;
typedef tx_curr_get_info_t tx_curr_put_info_t;
/* Structure that holds the Phy and virt addresses of the Blocks */
typedef struct rx_block_info {
RxD_t *block_virt_addr;
dma_addr_t block_dma_addr;
} rx_block_info_t;
/* pre declaration of the nic structure */
typedef struct s2io_nic nic_t;
/* Ring specific structure */
typedef struct ring_info {
/* The ring number */
int ring_no;
/*
* Place holders for the virtual and physical addresses of
* all the Rx Blocks
*/
rx_block_info_t rx_blocks[MAX_RX_BLOCKS_PER_RING];
int block_count;
int pkt_cnt;
/*
* Put pointer info which indictes which RxD has to be replenished
* with a new buffer.
*/
rx_curr_put_info_t rx_curr_put_info;
/*
* Get pointer info which indictes which is the last RxD that was
* processed by the driver.
*/
rx_curr_get_info_t rx_curr_get_info;
#ifndef CONFIG_S2IO_NAPI
/* Index to the absolute position of the put pointer of Rx ring */
int put_pos;
#endif
#ifdef CONFIG_2BUFF_MODE
/* Buffer Address store. */
buffAdd_t **ba;
#endif
nic_t *nic;
} ring_info_t;
/* Fifo specific structure */
typedef struct fifo_info {
/* FIFO number */
int fifo_no;
/* Maximum TxDs per TxDL */
int max_txds;
/* Place holder of all the TX List's Phy and Virt addresses. */
list_info_hold_t *list_info;
/*
* Current offset within the tx FIFO where driver would write
* new Tx frame
*/
tx_curr_put_info_t tx_curr_put_info;
/*
* Current offset within tx FIFO from where the driver would start freeing
* the buffers
*/
tx_curr_get_info_t tx_curr_get_info;
nic_t *nic;
}fifo_info_t;
/* Infomation related to the Tx and Rx FIFOs and Rings of Xena
* is maintained in this structure.
*/
typedef struct mac_info {
/* tx side stuff */
/* logical pointer of start of each Tx FIFO */
TxFIFO_element_t __iomem *tx_FIFO_start[MAX_TX_FIFOS];
/* Fifo specific structure */
fifo_info_t fifos[MAX_TX_FIFOS];
/* rx side stuff */
/* Ring specific structure */
ring_info_t rings[MAX_RX_RINGS];
u16 rmac_pause_time;
u16 mc_pause_threshold_q0q3;
u16 mc_pause_threshold_q4q7;
void *stats_mem; /* orignal pointer to allocated mem */
dma_addr_t stats_mem_phy; /* Physical address of the stat block */
u32 stats_mem_sz;
StatInfo_t *stats_info; /* Logical address of the stat block */
} mac_info_t;
/* structure representing the user defined MAC addresses */
typedef struct {
char addr[ETH_ALEN];
int usage_cnt;
} usr_addr_t;
/* Default Tunable parameters of the NIC. */
#define DEFAULT_FIFO_LEN 4096
#define SMALL_RXD_CNT 30 * (MAX_RXDS_PER_BLOCK+1)
#define LARGE_RXD_CNT 100 * (MAX_RXDS_PER_BLOCK+1)
#define SMALL_BLK_CNT 30
#define LARGE_BLK_CNT 100
/* Structure representing one instance of the NIC */
struct s2io_nic {
#ifdef CONFIG_S2IO_NAPI
/*
* Count of packets to be processed in a given iteration, it will be indicated
* by the quota field of the device structure when NAPI is enabled.
*/
int pkts_to_process;
#endif
struct net_device *dev;
mac_info_t mac_control;
struct config_param config;
struct pci_dev *pdev;
void __iomem *bar0;
void __iomem *bar1;
#define MAX_MAC_SUPPORTED 16
#define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED
macaddr_t def_mac_addr[MAX_MAC_SUPPORTED];
macaddr_t pre_mac_addr[MAX_MAC_SUPPORTED];
struct net_device_stats stats;
int high_dma_flag;
int device_close_flag;
int device_enabled_once;
char name[50];
struct tasklet_struct task;
volatile unsigned long tasklet_status;
/* Space to back up the PCI config space */
u32 config_space[256 / sizeof(u32)];
atomic_t rx_bufs_left[MAX_RX_RINGS];
spinlock_t tx_lock;
#ifndef CONFIG_S2IO_NAPI
spinlock_t put_lock;
#endif
#define PROMISC 1
#define ALL_MULTI 2
#define MAX_ADDRS_SUPPORTED 64
u16 usr_addr_count;
u16 mc_addr_count;
usr_addr_t usr_addrs[MAX_ADDRS_SUPPORTED];
u16 m_cast_flg;
u16 all_multi_pos;
u16 promisc_flg;
u16 tx_pkt_count;
u16 rx_pkt_count;
u16 tx_err_count;
u16 rx_err_count;
/* Id timer, used to blink NIC to physically identify NIC. */
struct timer_list id_timer;
/* Restart timer, used to restart NIC if the device is stuck and
* a schedule task that will set the correct Link state once the
* NIC's PHY has stabilized after a state change.
*/
#ifdef INIT_TQUEUE
struct tq_struct rst_timer_task;
struct tq_struct set_link_task;
#else
struct work_struct rst_timer_task;
struct work_struct set_link_task;
#endif
/* Flag that can be used to turn on or turn off the Rx checksum
* offload feature.
*/
int rx_csum;
/* after blink, the adapter must be restored with original
* values.
*/
u64 adapt_ctrl_org;
/* Last known link state. */
u16 last_link_state;
#define LINK_DOWN 1
#define LINK_UP 2
int task_flag;
#define CARD_DOWN 1
#define CARD_UP 2
atomic_t card_state;
volatile unsigned long link_state;
};
#define RESET_ERROR 1;
#define CMD_ERROR 2;
/* OS related system calls */
#ifndef readq
static inline u64 readq(void __iomem *addr)
{
u64 ret = 0;
ret = readl(addr + 4);
(u64) ret <<= 32;
(u64) ret |= readl(addr);
return ret;
}
#endif
#ifndef writeq
static inline void writeq(u64 val, void __iomem *addr)
{
writel((u32) (val), addr);
writel((u32) (val >> 32), (addr + 4));
}
/* In 32 bit modes, some registers have to be written in a
* particular order to expect correct hardware operation. The
* macro SPECIAL_REG_WRITE is used to perform such ordered
* writes. Defines UF (Upper First) and LF (Lower First) will
* be used to specify the required write order.
*/
#define UF 1
#define LF 2
static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order)
{
if (order == LF) {
writel((u32) (val), addr);
writel((u32) (val >> 32), (addr + 4));
} else {
writel((u32) (val >> 32), (addr + 4));
writel((u32) (val), addr);
}
}
#else
#define SPECIAL_REG_WRITE(val, addr, dummy) writeq(val, addr)
#endif
/* Interrupt related values of Xena */
#define ENABLE_INTRS 1
#define DISABLE_INTRS 2
/* Highest level interrupt blocks */
#define TX_PIC_INTR (0x0001<<0)
#define TX_DMA_INTR (0x0001<<1)
#define TX_MAC_INTR (0x0001<<2)
#define TX_XGXS_INTR (0x0001<<3)
#define TX_TRAFFIC_INTR (0x0001<<4)
#define RX_PIC_INTR (0x0001<<5)
#define RX_DMA_INTR (0x0001<<6)
#define RX_MAC_INTR (0x0001<<7)
#define RX_XGXS_INTR (0x0001<<8)
#define RX_TRAFFIC_INTR (0x0001<<9)
#define MC_INTR (0x0001<<10)
#define ENA_ALL_INTRS ( TX_PIC_INTR | \
TX_DMA_INTR | \
TX_MAC_INTR | \
TX_XGXS_INTR | \
TX_TRAFFIC_INTR | \
RX_PIC_INTR | \
RX_DMA_INTR | \
RX_MAC_INTR | \
RX_XGXS_INTR | \
RX_TRAFFIC_INTR | \
MC_INTR )
/* Interrupt masks for the general interrupt mask register */
#define DISABLE_ALL_INTRS 0xFFFFFFFFFFFFFFFFULL
#define TXPIC_INT_M BIT(0)
#define TXDMA_INT_M BIT(1)
#define TXMAC_INT_M BIT(2)
#define TXXGXS_INT_M BIT(3)
#define TXTRAFFIC_INT_M BIT(8)
#define PIC_RX_INT_M BIT(32)
#define RXDMA_INT_M BIT(33)
#define RXMAC_INT_M BIT(34)
#define MC_INT_M BIT(35)
#define RXXGXS_INT_M BIT(36)
#define RXTRAFFIC_INT_M BIT(40)
/* PIC level Interrupts TODO*/
/* DMA level Inressupts */
#define TXDMA_PFC_INT_M BIT(0)
#define TXDMA_PCC_INT_M BIT(2)
/* PFC block interrupts */
#define PFC_MISC_ERR_1 BIT(0) /* Interrupt to indicate FIFO full */
/* PCC block interrupts. */
#define PCC_FB_ECC_ERR vBIT(0xff, 16, 8) /* Interrupt to indicate
PCC_FB_ECC Error. */
#define RXD_GET_VLAN_TAG(Control_2) (u16)(Control_2 & MASK_VLAN_TAG)
/*
* Prototype declaration.
*/
static int __devinit s2io_init_nic(struct pci_dev *pdev,
const struct pci_device_id *pre);
static void __devexit s2io_rem_nic(struct pci_dev *pdev);
static int init_shared_mem(struct s2io_nic *sp);
static void free_shared_mem(struct s2io_nic *sp);
static int init_nic(struct s2io_nic *nic);
static void rx_intr_handler(ring_info_t *ring_data);
static void tx_intr_handler(fifo_info_t *fifo_data);
static void alarm_intr_handler(struct s2io_nic *sp);
static int s2io_starter(void);
void s2io_closer(void);
static void s2io_tx_watchdog(struct net_device *dev);
static void s2io_tasklet(unsigned long dev_addr);
static void s2io_set_multicast(struct net_device *dev);
static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp);
void s2io_link(nic_t * sp, int link);
void s2io_reset(nic_t * sp);
#if defined(CONFIG_S2IO_NAPI)
static int s2io_poll(struct net_device *dev, int *budget);
#endif
static void s2io_init_pci(nic_t * sp);
int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs);
static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
static struct ethtool_ops netdev_ethtool_ops;
static void s2io_set_link(unsigned long data);
int s2io_set_swapper(nic_t * sp);
static void s2io_card_down(nic_t *nic);
static int s2io_card_up(nic_t *nic);
int get_xena_rev_id(struct pci_dev *pdev);
#endif /* _S2IO_H */