AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-25 00:40:56 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
5d8e5aee0e
linux_dsm_epyc7002/net/batman-adv/debugfs.h

74 lines
1.6 KiB
C
Raw Normal View History

batman-adv: Add SPDX license identifier above copyright header The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-11-19 21:05:11 +07:00
/* SPDX-License-Identifier: GPL-2.0 */
batman-adv: Update copyright years for 2020 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-01-01 06:00:01 +07:00
/* Copyright (C) 2010-2020 B.A.T.M.A.N. contributors:
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 18:19:28 +07:00
*
* Marek Lindner
*/
#ifndef _NET_BATMAN_ADV_DEBUGFS_H_
#define _NET_BATMAN_ADV_DEBUGFS_H_
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-18 00:40:28 +07:00
#include "main.h"
batman-adv: Use includes instead of fwdecls While it can be slightly beneficial for the build performance to use forward declarations instead of includes, the handling of them together with changes in the included headers makes it unnecessary complicated and fragile. Just replace them with actual includes since some parts (hwmon, ..) of the kernel even request avoidance of forward declarations and net/ is mostly not using them in *.c file. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-25 01:11:17 +07:00
#include <linux/fs.h>
#include <linux/netdevice.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-18 00:40:28 +07:00
batman-adv: Prefix debugfs defines with BATADV_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-04 03:19:08 +07:00
#define BATADV_DEBUGFS_SUBDIR "batman_adv"
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 18:19:28 +07:00
batman-adv: Allow to disable debugfs support The files provided by batman-adv via debugfs are currently converted to netlink. Tools which are not yet converted to use the netlink interface may still rely on the old debugfs files. But systems which already upgraded their tools can save some space by disabling this feature. The default configuration of batman-adv on amd64 can reduce the size of the module by around 11% when this feature is disabled. $ size net/batman-adv/batman-adv.ko* text data bss dec hex filename 150507 10395 4160 165062 284c6 net/batman-adv/batman-adv.ko.y 137106 7099 2112 146317 23b8d net/batman-adv/batman-adv.ko.n Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-16 14:31:20 +07:00
#if IS_ENABLED(CONFIG_BATMAN_ADV_DEBUGFS)
batman-adv: debugfs, avoid compiling for !DEBUG_FS Normally the debugfs framework will return error pointer with -ENODEV for function calls when DEBUG_FS is not set. batman does not notice this error code and continues trying to create debugfs files and executes more code. We can avoid this code execution by disabling compiling debugfs.c when DEBUG_FS is not set. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-12-26 18:41:18 +07:00
batman-adv: Mark debugfs functionality as deprecated CONFIG_BATMAN_ADV_DEBUGFS is disabled by default because debugfs is not supported for batman-adv interfaces in any non-default netns. Any remaining users of this interface should still be informed about the deprecation and the generic netlink alternative. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-08-11 04:36:15 +07:00
void batadv_debugfs_deprecated(struct file *file, const char *alt);
batman-adv: Prefix bat_debugfs non-static functions with batadv_ batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 07:09:23 +07:00
void batadv_debugfs_init(void);
void batadv_debugfs_destroy(void);
int batadv_debugfs_add_meshif(struct net_device *dev);
batman-adv: Fix debugfs path for renamed softif batman-adv is creating special debugfs directories in the init net_namespace for each created soft-interface (batadv net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new batadv net_device with the name "bat0". batman-adv is then also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "bat1" and registers a different batadv device with the name "bat0". batman-adv will then try to create a directory with the name "bat0" under $debugfs/batman-adv/ again. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for soft-interfaces whenever it detects such a net_device rename. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-02 00:24:24 +07:00
void batadv_debugfs_rename_meshif(struct net_device *dev);
batman-adv: Prefix bat_debugfs non-static functions with batadv_ batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 07:09:23 +07:00
void batadv_debugfs_del_meshif(struct net_device *dev);
batman-adv: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because we don't care if debugfs works or not, this trickles back a bit so we can clean things up by making some functions return void instead of an error value that is never going to fail. Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [sven@narfation.org: drop unused variables] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-06-14 14:11:23 +07:00
void batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface);
batman-adv: Fix debugfs path for renamed hardif batman-adv is creating special debugfs directories in the init net_namespace for each valid hard-interface (net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new net_device which gets the name "wlan0" assigned by default. batman-adv is also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "wl_pri" and registers a different device. The kernel may now decide to use the name "wlan0" again for this new device. batman-adv will detect it as a valid net_device and tries to create a directory with the name "wlan0" under $debugfs/batman-adv/. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for hard-interfaces whenever it detects such a net_device rename. Fixes: 5bc7c1eb44f2 ("batman-adv: add debugfs structure for information per interface") Reported-by: John Soros <sorosj@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-02 00:24:23 +07:00
void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface);
batman-adv: add debugfs structure for information per interface To show information per interface, add a debugfs hardif structure similar to the system in sysfs. Hard interface folders will be created in "$debugfs/batman-adv/". Files are not yet added. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-11-21 20:16:12 +07:00
void batadv_debugfs_del_hardif(struct batadv_hard_iface *hard_iface);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 18:19:28 +07:00
batman-adv: debugfs, avoid compiling for !DEBUG_FS Normally the debugfs framework will return error pointer with -ENODEV for function calls when DEBUG_FS is not set. batman does not notice this error code and continues trying to create debugfs files and executes more code. We can avoid this code execution by disabling compiling debugfs.c when DEBUG_FS is not set. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-12-26 18:41:18 +07:00
#else
batman-adv: Mark debugfs functionality as deprecated CONFIG_BATMAN_ADV_DEBUGFS is disabled by default because debugfs is not supported for batman-adv interfaces in any non-default netns. Any remaining users of this interface should still be informed about the deprecation and the generic netlink alternative. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-08-11 04:36:15 +07:00
static inline void batadv_debugfs_deprecated(struct file *file, const char *alt)
{
}
batman-adv: debugfs, avoid compiling for !DEBUG_FS Normally the debugfs framework will return error pointer with -ENODEV for function calls when DEBUG_FS is not set. batman does not notice this error code and continues trying to create debugfs files and executes more code. We can avoid this code execution by disabling compiling debugfs.c when DEBUG_FS is not set. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-12-26 18:41:18 +07:00
static inline void batadv_debugfs_init(void)
{
}
static inline void batadv_debugfs_destroy(void)
{
}
static inline int batadv_debugfs_add_meshif(struct net_device *dev)
{
return 0;
}
batman-adv: Fix debugfs path for renamed softif batman-adv is creating special debugfs directories in the init net_namespace for each created soft-interface (batadv net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new batadv net_device with the name "bat0". batman-adv is then also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "bat1" and registers a different batadv device with the name "bat0". batman-adv will then try to create a directory with the name "bat0" under $debugfs/batman-adv/ again. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for soft-interfaces whenever it detects such a net_device rename. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-02 00:24:24 +07:00
static inline void batadv_debugfs_rename_meshif(struct net_device *dev)
{
}
batman-adv: debugfs, avoid compiling for !DEBUG_FS Normally the debugfs framework will return error pointer with -ENODEV for function calls when DEBUG_FS is not set. batman does not notice this error code and continues trying to create debugfs files and executes more code. We can avoid this code execution by disabling compiling debugfs.c when DEBUG_FS is not set. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-12-26 18:41:18 +07:00
static inline void batadv_debugfs_del_meshif(struct net_device *dev)
{
}
static inline
batman-adv: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because we don't care if debugfs works or not, this trickles back a bit so we can clean things up by making some functions return void instead of an error value that is never going to fail. Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [sven@narfation.org: drop unused variables] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-06-14 14:11:23 +07:00
void batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface)
batman-adv: debugfs, avoid compiling for !DEBUG_FS Normally the debugfs framework will return error pointer with -ENODEV for function calls when DEBUG_FS is not set. batman does not notice this error code and continues trying to create debugfs files and executes more code. We can avoid this code execution by disabling compiling debugfs.c when DEBUG_FS is not set. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-12-26 18:41:18 +07:00
{
}
batman-adv: Fix debugfs path for renamed hardif batman-adv is creating special debugfs directories in the init net_namespace for each valid hard-interface (net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new net_device which gets the name "wlan0" assigned by default. batman-adv is also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "wl_pri" and registers a different device. The kernel may now decide to use the name "wlan0" again for this new device. batman-adv will detect it as a valid net_device and tries to create a directory with the name "wlan0" under $debugfs/batman-adv/. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for hard-interfaces whenever it detects such a net_device rename. Fixes: 5bc7c1eb44f2 ("batman-adv: add debugfs structure for information per interface") Reported-by: John Soros <sorosj@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-02 00:24:23 +07:00
static inline
void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface)
{
}
batman-adv: debugfs, avoid compiling for !DEBUG_FS Normally the debugfs framework will return error pointer with -ENODEV for function calls when DEBUG_FS is not set. batman does not notice this error code and continues trying to create debugfs files and executes more code. We can avoid this code execution by disabling compiling debugfs.c when DEBUG_FS is not set. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-12-26 18:41:18 +07:00
static inline
void batadv_debugfs_del_hardif(struct batadv_hard_iface *hard_iface)
{
}
#endif
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 18:19:28 +07:00
#endif /* _NET_BATMAN_ADV_DEBUGFS_H_ */
Reference in New Issue Copy Permalink