linux_dsm_epyc7002/drivers/regulator/ab3100.c

746 lines
18 KiB
C
Raw Normal View History

/*
* drivers/regulator/ab3100.c
*
* Copyright (C) 2008-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Low-level control of the AB3100 IC Low Dropout (LDO)
* regulators, external regulator and buck converter
* Author: Mattias Wallin <mattias.wallin@stericsson.com>
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/mfd/ab3100.h>
#include <linux/mfd/abx500.h>
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
/* LDO registers and some handy masking definitions for AB3100 */
#define AB3100_LDO_A 0x40
#define AB3100_LDO_C 0x41
#define AB3100_LDO_D 0x42
#define AB3100_LDO_E 0x43
#define AB3100_LDO_E_SLEEP 0x44
#define AB3100_LDO_F 0x45
#define AB3100_LDO_G 0x46
#define AB3100_LDO_H 0x47
#define AB3100_LDO_H_SLEEP_MODE 0
#define AB3100_LDO_H_SLEEP_EN 2
#define AB3100_LDO_ON 4
#define AB3100_LDO_H_VSEL_AC 5
#define AB3100_LDO_K 0x48
#define AB3100_LDO_EXT 0x49
#define AB3100_BUCK 0x4A
#define AB3100_BUCK_SLEEP 0x4B
#define AB3100_REG_ON_MASK 0x10
/**
* struct ab3100_regulator
* A struct passed around the individual regulator functions
* @platform_device: platform device holding this regulator
* @dev: handle to the device
* @plfdata: AB3100 platform data passed in at probe time
* @regreg: regulator register number in the AB3100
*/
struct ab3100_regulator {
struct regulator_dev *rdev;
struct device *dev;
struct ab3100_platform_data *plfdata;
u8 regreg;
};
/* The order in which registers are initialized */
static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
AB3100_LDO_A,
AB3100_LDO_C,
AB3100_LDO_E,
AB3100_LDO_E_SLEEP,
AB3100_LDO_F,
AB3100_LDO_G,
AB3100_LDO_H,
AB3100_LDO_K,
AB3100_LDO_EXT,
AB3100_BUCK,
AB3100_BUCK_SLEEP,
AB3100_LDO_D,
};
/* Preset (hardware defined) voltages for these regulators */
#define LDO_A_VOLTAGE 2750000
#define LDO_C_VOLTAGE 2650000
#define LDO_D_VOLTAGE 2650000
static const unsigned int ldo_e_buck_typ_voltages[] = {
1800000,
1400000,
1300000,
1200000,
1100000,
1050000,
900000,
};
static const unsigned int ldo_f_typ_voltages[] = {
1800000,
1400000,
1300000,
1200000,
1100000,
1050000,
2500000,
2650000,
};
static const unsigned int ldo_g_typ_voltages[] = {
2850000,
2750000,
1800000,
1500000,
};
static const unsigned int ldo_h_typ_voltages[] = {
2750000,
1800000,
1500000,
1200000,
};
static const unsigned int ldo_k_typ_voltages[] = {
2750000,
1800000,
};
/* The regulator devices */
static struct ab3100_regulator
ab3100_regulators[AB3100_NUM_REGULATORS] = {
{
.regreg = AB3100_LDO_A,
},
{
.regreg = AB3100_LDO_C,
},
{
.regreg = AB3100_LDO_D,
},
{
.regreg = AB3100_LDO_E,
},
{
.regreg = AB3100_LDO_F,
},
{
.regreg = AB3100_LDO_G,
},
{
.regreg = AB3100_LDO_H,
},
{
.regreg = AB3100_LDO_K,
},
{
.regreg = AB3100_LDO_EXT,
/* No voltages for the external regulator */
},
{
.regreg = AB3100_BUCK,
},
};
/*
* General functions for enable, disable and is_enabled used for
* LDO: A,C,E,F,G,H,K,EXT and BUCK
*/
static int ab3100_enable_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
int err;
u8 regval;
err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
&regval);
if (err) {
dev_warn(&reg->dev, "failed to get regid %d value\n",
abreg->regreg);
return err;
}
/* The regulator is already on, no reason to go further */
if (regval & AB3100_REG_ON_MASK)
return 0;
regval |= AB3100_REG_ON_MASK;
err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
regval);
if (err) {
dev_warn(&reg->dev, "failed to set regid %d value\n",
abreg->regreg);
return err;
}
return 0;
}
static int ab3100_disable_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
int err;
u8 regval;
/*
* LDO D is a special regulator. When it is disabled, the entire
* system is shut down. So this is handled specially.
*/
pr_info("Called ab3100_disable_regulator\n");
if (abreg->regreg == AB3100_LDO_D) {
dev_info(&reg->dev, "disabling LDO D - shut down system\n");
/* Setting LDO D to 0x00 cuts the power to the SoC */
return abx500_set_register_interruptible(abreg->dev, 0,
AB3100_LDO_D, 0x00U);
}
/*
* All other regulators are handled here
*/
err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
&regval);
if (err) {
dev_err(&reg->dev, "unable to get register 0x%x\n",
abreg->regreg);
return err;
}
regval &= ~AB3100_REG_ON_MASK;
return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
regval);
}
static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
&regval);
if (err) {
dev_err(&reg->dev, "unable to get register 0x%x\n",
abreg->regreg);
return err;
}
return regval & AB3100_REG_ON_MASK;
}
static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
/*
* For variable types, read out setting and index into
* supplied voltage list.
*/
err = abx500_get_register_interruptible(abreg->dev, 0,
abreg->regreg, &regval);
if (err) {
dev_warn(&reg->dev,
"failed to get regulator value in register %02x\n",
abreg->regreg);
return err;
}
/* The 3 highest bits index voltages */
regval &= 0xE0;
regval >>= 5;
if (regval >= reg->desc->n_voltages) {
dev_err(&reg->dev,
"regulator register %02x contains an illegal voltage setting\n",
abreg->regreg);
return -EINVAL;
}
return reg->desc->volt_table[regval];
}
static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
unsigned selector)
{
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
err = abx500_get_register_interruptible(abreg->dev, 0,
abreg->regreg, &regval);
if (err) {
dev_warn(&reg->dev,
"failed to get regulator register %02x\n",
abreg->regreg);
return err;
}
/* The highest three bits control the variable regulators */
regval &= ~0xE0;
regval |= (selector << 5);
err = abx500_set_register_interruptible(abreg->dev, 0,
abreg->regreg, regval);
if (err)
dev_warn(&reg->dev, "failed to set regulator register %02x\n",
abreg->regreg);
return err;
}
static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
int uV)
{
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
int bestindex;
u8 targetreg;
if (abreg->regreg == AB3100_LDO_E)
targetreg = AB3100_LDO_E_SLEEP;
else if (abreg->regreg == AB3100_BUCK)
targetreg = AB3100_BUCK_SLEEP;
else
return -EINVAL;
/* LDO E and BUCK have special suspend voltages you can set */
bestindex = regulator_map_voltage_iterate(reg, uV, uV);
err = abx500_get_register_interruptible(abreg->dev, 0,
targetreg, &regval);
if (err) {
dev_warn(&reg->dev,
"failed to get regulator register %02x\n",
targetreg);
return err;
}
/* The highest three bits control the variable regulators */
regval &= ~0xE0;
regval |= (bestindex << 5);
err = abx500_set_register_interruptible(abreg->dev, 0,
targetreg, regval);
if (err)
dev_warn(&reg->dev, "failed to set regulator register %02x\n",
abreg->regreg);
return err;
}
/*
* The external regulator can just define a fixed voltage.
*/
static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
if (abreg->plfdata)
return abreg->plfdata->external_voltage;
else
/* TODO: encode external voltage into device tree */
return 0;
}
static struct regulator_ops regulator_ops_fixed = {
.list_voltage = regulator_list_voltage_linear,
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
};
static struct regulator_ops regulator_ops_variable = {
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
.get_voltage = ab3100_get_voltage_regulator,
.set_voltage_sel = ab3100_set_voltage_regulator_sel,
.list_voltage = regulator_list_voltage_table,
};
static struct regulator_ops regulator_ops_variable_sleepable = {
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
.get_voltage = ab3100_get_voltage_regulator,
.set_voltage_sel = ab3100_set_voltage_regulator_sel,
.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
.list_voltage = regulator_list_voltage_table,
};
/*
* LDO EXT is an external regulator so it is really
* not possible to set any voltage locally here, AB3100
* is an on/off switch plain an simple. The external
* voltage is defined in the board set-up if any.
*/
static struct regulator_ops regulator_ops_external = {
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
.get_voltage = ab3100_get_voltage_regulator_external,
};
static struct regulator_desc
ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
{
.name = "LDO_A",
.id = AB3100_LDO_A,
.ops = &regulator_ops_fixed,
.n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = LDO_A_VOLTAGE,
.enable_time = 200,
},
{
.name = "LDO_C",
.id = AB3100_LDO_C,
.ops = &regulator_ops_fixed,
.n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = LDO_C_VOLTAGE,
.enable_time = 200,
},
{
.name = "LDO_D",
.id = AB3100_LDO_D,
.ops = &regulator_ops_fixed,
.n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = LDO_D_VOLTAGE,
.enable_time = 200,
},
{
.name = "LDO_E",
.id = AB3100_LDO_E,
.ops = &regulator_ops_variable_sleepable,
.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
.volt_table = ldo_e_buck_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 200,
},
{
.name = "LDO_F",
.id = AB3100_LDO_F,
.ops = &regulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
.volt_table = ldo_f_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 600,
},
{
.name = "LDO_G",
.id = AB3100_LDO_G,
.ops = &regulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
.volt_table = ldo_g_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 400,
},
{
.name = "LDO_H",
.id = AB3100_LDO_H,
.ops = &regulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
.volt_table = ldo_h_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 200,
},
{
.name = "LDO_K",
.id = AB3100_LDO_K,
.ops = &regulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
.volt_table = ldo_k_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 200,
},
{
.name = "LDO_EXT",
.id = AB3100_LDO_EXT,
.ops = &regulator_ops_external,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "BUCK",
.id = AB3100_BUCK,
.ops = &regulator_ops_variable_sleepable,
.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
.volt_table = ldo_e_buck_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 1000,
},
};
static int ab3100_regulator_register(struct platform_device *pdev,
struct ab3100_platform_data *plfdata,
struct regulator_init_data *init_data,
struct device_node *np,
unsigned long id)
{
struct regulator_desc *desc;
struct ab3100_regulator *reg;
struct regulator_dev *rdev;
struct regulator_config config = { };
int err, i;
for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
desc = &ab3100_regulator_desc[i];
if (desc->id == id)
break;
}
if (desc->id != id)
return -ENODEV;
/* Same index used for this array */
reg = &ab3100_regulators[i];
/*
* Initialize per-regulator struct.
* Inherit platform data, this comes down from the
* i2c boarddata, from the machine. So if you want to
* see what it looks like for a certain machine, go
* into the machine I2C setup.
*/
reg->dev = &pdev->dev;
if (plfdata) {
reg->plfdata = plfdata;
config.init_data = &plfdata->reg_constraints[i];
} else if (np) {
config.of_node = np;
config.init_data = init_data;
}
config.dev = &pdev->dev;
config.driver_data = reg;
rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
err = PTR_ERR(rdev);
dev_err(&pdev->dev,
"%s: failed to register regulator %s err %d\n",
__func__, desc->name,
err);
return err;
}
/* Then set a pointer back to the registered regulator */
reg->rdev = rdev;
return 0;
}
static struct of_regulator_match ab3100_regulator_matches[] = {
{ .name = "ab3100_ldo_a", .driver_data = (void *) AB3100_LDO_A, },
{ .name = "ab3100_ldo_c", .driver_data = (void *) AB3100_LDO_C, },
{ .name = "ab3100_ldo_d", .driver_data = (void *) AB3100_LDO_D, },
{ .name = "ab3100_ldo_e", .driver_data = (void *) AB3100_LDO_E, },
{ .name = "ab3100_ldo_f", .driver_data = (void *) AB3100_LDO_F },
{ .name = "ab3100_ldo_g", .driver_data = (void *) AB3100_LDO_G },
{ .name = "ab3100_ldo_h", .driver_data = (void *) AB3100_LDO_H },
{ .name = "ab3100_ldo_k", .driver_data = (void *) AB3100_LDO_K },
{ .name = "ab3100_ext", .driver_data = (void *) AB3100_LDO_EXT },
{ .name = "ab3100_buck", .driver_data = (void *) AB3100_BUCK },
};
/*
* Initial settings of ab3100 registers.
* Common for below LDO regulator settings are that
* bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
* Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
*/
/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
#define LDO_A_SETTING 0x16
/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
#define LDO_C_SETTING 0x10
/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
#define LDO_D_SETTING 0x10
/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
#define LDO_E_SETTING 0x10
/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
#define LDO_E_SLEEP_SETTING 0x00
/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
#define LDO_F_SETTING 0xD0
/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
#define LDO_G_SETTING 0x00
/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
#define LDO_H_SETTING 0x18
/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
#define LDO_K_SETTING 0x00
/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
#define LDO_EXT_SETTING 0x00
/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
#define BUCK_SETTING 0x7D
/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
#define BUCK_SLEEP_SETTING 0xAC
static const u8 ab3100_reg_initvals[] = {
LDO_A_SETTING,
LDO_C_SETTING,
LDO_E_SETTING,
LDO_E_SLEEP_SETTING,
LDO_F_SETTING,
LDO_G_SETTING,
LDO_H_SETTING,
LDO_K_SETTING,
LDO_EXT_SETTING,
BUCK_SETTING,
BUCK_SLEEP_SETTING,
LDO_D_SETTING,
};
static int ab3100_regulators_remove(struct platform_device *pdev)
{
int i;
for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
struct ab3100_regulator *reg = &ab3100_regulators[i];
reg->rdev = NULL;
}
return 0;
}
static int
ab3100_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
{
int err, i;
/*
* Set up the regulator registers, as was previously done with
* platform data.
*/
/* Set up regulators */
for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
err = abx500_set_register_interruptible(&pdev->dev, 0,
ab3100_reg_init_order[i],
ab3100_reg_initvals[i]);
if (err) {
dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
err);
return err;
}
}
for (i = 0; i < ARRAY_SIZE(ab3100_regulator_matches); i++) {
err = ab3100_regulator_register(
pdev, NULL, ab3100_regulator_matches[i].init_data,
ab3100_regulator_matches[i].of_node,
(unsigned long)ab3100_regulator_matches[i].driver_data);
if (err) {
ab3100_regulators_remove(pdev);
return err;
}
}
return 0;
}
static int ab3100_regulators_probe(struct platform_device *pdev)
{
struct ab3100_platform_data *plfdata = dev_get_platdata(&pdev->dev);
struct device_node *np = pdev->dev.of_node;
int err = 0;
u8 data;
int i;
/* Check chip state */
err = abx500_get_register_interruptible(&pdev->dev, 0,
AB3100_LDO_D, &data);
if (err) {
dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
return err;
}
if (data & 0x10)
dev_notice(&pdev->dev,
"chip is already in active mode (Warm start)\n");
else
dev_notice(&pdev->dev,
"chip is in inactive mode (Cold start)\n");
if (np) {
err = of_regulator_match(&pdev->dev, np,
ab3100_regulator_matches,
ARRAY_SIZE(ab3100_regulator_matches));
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
}
return ab3100_regulator_of_probe(pdev, np);
}
/* Set up regulators */
for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
err = abx500_set_register_interruptible(&pdev->dev, 0,
ab3100_reg_init_order[i],
plfdata->reg_initvals[i]);
if (err) {
dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
err);
return err;
}
}
/* Register the regulators */
for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
struct regulator_desc *desc = &ab3100_regulator_desc[i];
err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
desc->id);
if (err) {
ab3100_regulators_remove(pdev);
return err;
}
}
return 0;
}
static struct platform_driver ab3100_regulators_driver = {
.driver = {
.name = "ab3100-regulators",
},
.probe = ab3100_regulators_probe,
.remove = ab3100_regulators_remove,
};
static __init int ab3100_regulators_init(void)
{
return platform_driver_register(&ab3100_regulators_driver);
}
static __exit void ab3100_regulators_exit(void)
{
platform_driver_unregister(&ab3100_regulators_driver);
}
subsys_initcall(ab3100_regulators_init);
module_exit(ab3100_regulators_exit);
MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
MODULE_DESCRIPTION("AB3100 Regulator driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ab3100-regulators");