linux_dsm_epyc7002/drivers/net/wireless/ath/ath6kl/main.c

1502 lines
40 KiB
C
Raw Normal View History

Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/*
* Copyright (c) 2004-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "core.h"
#include "hif-ops.h"
#include "cfg80211.h"
#include "target.h"
#include "debug.h"
struct ath6kl_sta *ath6kl_find_sta(struct ath6kl *ar, u8 *node_addr)
{
struct ath6kl_sta *conn = NULL;
u8 i, max_conn;
max_conn = (ar->nw_type == AP_NETWORK) ? AP_MAX_NUM_STA : 0;
for (i = 0; i < max_conn; i++) {
if (memcmp(node_addr, ar->sta_list[i].mac, ETH_ALEN) == 0) {
conn = &ar->sta_list[i];
break;
}
}
return conn;
}
struct ath6kl_sta *ath6kl_find_sta_by_aid(struct ath6kl *ar, u8 aid)
{
struct ath6kl_sta *conn = NULL;
u8 ctr;
for (ctr = 0; ctr < AP_MAX_NUM_STA; ctr++) {
if (ar->sta_list[ctr].aid == aid) {
conn = &ar->sta_list[ctr];
break;
}
}
return conn;
}
static void ath6kl_add_new_sta(struct ath6kl *ar, u8 *mac, u16 aid, u8 *wpaie,
u8 ielen, u8 keymgmt, u8 ucipher, u8 auth)
{
struct ath6kl_sta *sta;
u8 free_slot;
free_slot = aid - 1;
sta = &ar->sta_list[free_slot];
memcpy(sta->mac, mac, ETH_ALEN);
if (ielen <= ATH6KL_MAX_IE)
memcpy(sta->wpa_ie, wpaie, ielen);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
sta->aid = aid;
sta->keymgmt = keymgmt;
sta->ucipher = ucipher;
sta->auth = auth;
ar->sta_list_index = ar->sta_list_index | (1 << free_slot);
ar->ap_stats.sta[free_slot].aid = cpu_to_le32(aid);
}
static void ath6kl_sta_cleanup(struct ath6kl *ar, u8 i)
{
struct ath6kl_sta *sta = &ar->sta_list[i];
/* empty the queued pkts in the PS queue if any */
spin_lock_bh(&sta->psq_lock);
skb_queue_purge(&sta->psq);
spin_unlock_bh(&sta->psq_lock);
memset(&ar->ap_stats.sta[sta->aid - 1], 0,
sizeof(struct wmi_per_sta_stat));
memset(sta->mac, 0, ETH_ALEN);
memset(sta->wpa_ie, 0, ATH6KL_MAX_IE);
sta->aid = 0;
sta->sta_flags = 0;
ar->sta_list_index = ar->sta_list_index & ~(1 << i);
}
static u8 ath6kl_remove_sta(struct ath6kl *ar, u8 *mac, u16 reason)
{
u8 i, removed = 0;
if (is_zero_ether_addr(mac))
return removed;
if (is_broadcast_ether_addr(mac)) {
ath6kl_dbg(ATH6KL_DBG_TRC, "deleting all station\n");
for (i = 0; i < AP_MAX_NUM_STA; i++) {
if (!is_zero_ether_addr(ar->sta_list[i].mac)) {
ath6kl_sta_cleanup(ar, i);
removed = 1;
}
}
} else {
for (i = 0; i < AP_MAX_NUM_STA; i++) {
if (memcmp(ar->sta_list[i].mac, mac, ETH_ALEN) == 0) {
ath6kl_dbg(ATH6KL_DBG_TRC,
"deleting station %pM aid=%d reason=%d\n",
mac, ar->sta_list[i].aid, reason);
ath6kl_sta_cleanup(ar, i);
removed = 1;
break;
}
}
}
return removed;
}
enum htc_endpoint_id ath6kl_ac2_endpoint_id(void *devt, u8 ac)
{
struct ath6kl *ar = devt;
return ar->ac2ep_map[ac];
}
struct ath6kl_cookie *ath6kl_alloc_cookie(struct ath6kl *ar)
{
struct ath6kl_cookie *cookie;
cookie = ar->cookie_list;
if (cookie != NULL) {
ar->cookie_list = cookie->arc_list_next;
ar->cookie_count--;
}
return cookie;
}
void ath6kl_cookie_init(struct ath6kl *ar)
{
u32 i;
ar->cookie_list = NULL;
ar->cookie_count = 0;
memset(ar->cookie_mem, 0, sizeof(ar->cookie_mem));
for (i = 0; i < MAX_COOKIE_NUM; i++)
ath6kl_free_cookie(ar, &ar->cookie_mem[i]);
}
void ath6kl_cookie_cleanup(struct ath6kl *ar)
{
ar->cookie_list = NULL;
ar->cookie_count = 0;
}
void ath6kl_free_cookie(struct ath6kl *ar, struct ath6kl_cookie *cookie)
{
/* Insert first */
if (!ar || !cookie)
return;
cookie->arc_list_next = ar->cookie_list;
ar->cookie_list = cookie;
ar->cookie_count++;
}
/* set the window address register (using 4-byte register access ). */
static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr)
{
int status;
s32 i;
__le32 addr_val;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/*
* Write bytes 1,2,3 of the register to set the upper address bytes,
* the LSB is written last to initiate the access cycle
*/
for (i = 1; i <= 3; i++) {
/*
* Fill the buffer with the address byte value we want to
* hit 4 times. No need to worry about endianness as the
* same byte is copied to all four bytes of addr_val at
* any time.
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
*/
memset((u8 *)&addr_val, ((u8 *)&addr)[i], 4);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/*
* Hit each byte of the register address with a 4-byte
* write operation to the same address, this is a harmless
* operation.
*/
status = hif_read_write_sync(ar, reg_addr + i, (u8 *)&addr_val,
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
4, HIF_WR_SYNC_BYTE_FIX);
if (status)
break;
}
if (status) {
ath6kl_err("failed to write initial bytes of 0x%x to window reg: 0x%X\n",
addr, reg_addr);
return status;
}
/*
* Write the address register again, this time write the whole
* 4-byte value. The effect here is that the LSB write causes the
* cycle to start, the extra 3 byte write to bytes 1,2,3 has no
* effect since we are writing the same values again
*/
addr_val = cpu_to_le32(addr);
status = hif_read_write_sync(ar, reg_addr,
(u8 *)&(addr_val),
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
4, HIF_WR_SYNC_BYTE_INC);
if (status) {
ath6kl_err("failed to write 0x%x to window reg: 0x%X\n",
addr, reg_addr);
return status;
}
return 0;
}
/*
* Read from the hardware through its diagnostic window. No cooperation
* from the firmware is required for this.
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
*/
int ath6kl_diag_read32(struct ath6kl *ar, u32 address, u32 *value)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
{
int ret;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/* set window register to start read cycle */
ret = ath6kl_set_addrwin_reg(ar, WINDOW_READ_ADDR_ADDRESS, address);
if (ret)
return ret;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/* read the data */
ret = hif_read_write_sync(ar, WINDOW_DATA_ADDRESS, (u8 *) value,
sizeof(*value), HIF_RD_SYNC_BYTE_INC);
if (ret) {
ath6kl_warn("failed to read32 through diagnose window: %d\n",
ret);
return ret;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
return 0;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
/*
* Write to the ATH6KL through its diagnostic window. No cooperation from
* the Target is required for this.
*/
int ath6kl_diag_write32(struct ath6kl *ar, u32 address, __le32 value)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
{
int ret;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/* set write data */
ret = hif_read_write_sync(ar, WINDOW_DATA_ADDRESS, (u8 *) &value,
sizeof(value), HIF_WR_SYNC_BYTE_INC);
if (ret) {
ath6kl_err("failed to write 0x%x during diagnose window to 0x%d\n",
address, value);
return ret;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
/* set window register, which starts the write cycle */
return ath6kl_set_addrwin_reg(ar, WINDOW_WRITE_ADDR_ADDRESS,
address);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
int ath6kl_diag_read(struct ath6kl *ar, u32 address, void *data, u32 length)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
{
u32 count, *buf = data;
int ret;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
if (WARN_ON(length % 4))
return -EINVAL;
for (count = 0; count < length / 4; count++, address += 4) {
ret = ath6kl_diag_read32(ar, address, &buf[count]);
if (ret)
return ret;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
return 0;
}
int ath6kl_diag_write(struct ath6kl *ar, u32 address, void *data, u32 length)
{
u32 count;
__le32 *buf = data;
int ret;
if (WARN_ON(length % 4))
return -EINVAL;
for (count = 0; count < length / 4; count++, address += 4) {
ret = ath6kl_diag_write32(ar, address, buf[count]);
if (ret)
return ret;
}
return 0;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
int ath6kl_read_fwlogs(struct ath6kl *ar)
{
struct ath6kl_dbglog_hdr debug_hdr;
struct ath6kl_dbglog_buf debug_buf;
u32 address, length, dropped, firstbuf, debug_hdr_addr;
int ret = 0, loop;
u8 *buf;
buf = kmalloc(ATH6KL_FWLOG_PAYLOAD_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
address = TARG_VTOP(ar->target_type,
ath6kl_get_hi_item_addr(ar,
HI_ITEM(hi_dbglog_hdr)));
ret = ath6kl_diag_read32(ar, address, &debug_hdr_addr);
if (ret)
goto out;
/* Get the contents of the ring buffer */
if (debug_hdr_addr == 0) {
ath6kl_warn("Invalid address for debug_hdr_addr\n");
ret = -EINVAL;
goto out;
}
address = TARG_VTOP(ar->target_type, debug_hdr_addr);
ath6kl_diag_read(ar, address, &debug_hdr, sizeof(debug_hdr));
address = TARG_VTOP(ar->target_type,
le32_to_cpu(debug_hdr.dbuf_addr));
firstbuf = address;
dropped = le32_to_cpu(debug_hdr.dropped);
ath6kl_diag_read(ar, address, &debug_buf, sizeof(debug_buf));
loop = 100;
do {
address = TARG_VTOP(ar->target_type,
le32_to_cpu(debug_buf.buffer_addr));
length = le32_to_cpu(debug_buf.length);
if (length != 0 && (le32_to_cpu(debug_buf.length) <=
le32_to_cpu(debug_buf.bufsize))) {
length = ALIGN(length, 4);
ret = ath6kl_diag_read(ar, address,
buf, length);
if (ret)
goto out;
ath6kl_debug_fwlog_event(ar, buf, length);
}
address = TARG_VTOP(ar->target_type,
le32_to_cpu(debug_buf.next));
ath6kl_diag_read(ar, address, &debug_buf, sizeof(debug_buf));
if (ret)
goto out;
loop--;
if (WARN_ON(loop == 0)) {
ret = -ETIMEDOUT;
goto out;
}
} while (address != firstbuf);
out:
kfree(buf);
return ret;
}
/* FIXME: move to a better place, target.h? */
#define AR6003_RESET_CONTROL_ADDRESS 0x00004000
#define AR6004_RESET_CONTROL_ADDRESS 0x00004000
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
static void ath6kl_reset_device(struct ath6kl *ar, u32 target_type,
bool wait_fot_compltn, bool cold_reset)
{
int status = 0;
u32 address;
__le32 data;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
if (target_type != TARGET_TYPE_AR6003 &&
target_type != TARGET_TYPE_AR6004)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
return;
data = cold_reset ? cpu_to_le32(RESET_CONTROL_COLD_RST) :
cpu_to_le32(RESET_CONTROL_MBOX_RST);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
switch (target_type) {
case TARGET_TYPE_AR6003:
address = AR6003_RESET_CONTROL_ADDRESS;
break;
case TARGET_TYPE_AR6004:
address = AR6004_RESET_CONTROL_ADDRESS;
break;
default:
address = AR6003_RESET_CONTROL_ADDRESS;
break;
}
status = ath6kl_diag_write32(ar, address, data);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
if (status)
ath6kl_err("failed to reset target\n");
}
void ath6kl_stop_endpoint(struct net_device *dev, bool keep_profile,
bool get_dbglogs)
{
struct ath6kl *ar = ath6kl_priv(dev);
struct ath6kl_vif *vif = netdev_priv(dev);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
static u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
bool discon_issued;
netif_stop_queue(dev);
/* disable the target and the interrupts associated with it */
if (test_bit(WMI_READY, &ar->flag)) {
discon_issued = (test_bit(CONNECTED, &vif->flags) ||
test_bit(CONNECT_PEND, &vif->flags));
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
ath6kl_disconnect(ar);
if (!keep_profile)
ath6kl_init_profile_info(ar);
del_timer(&ar->disconnect_timer);
clear_bit(WMI_READY, &ar->flag);
ath6kl_wmi_shutdown(ar->wmi);
clear_bit(WMI_ENABLED, &ar->flag);
ar->wmi = NULL;
/*
* After wmi_shudown all WMI events will be dropped. We
* need to cleanup the buffers allocated in AP mode and
* give disconnect notification to stack, which usually
* happens in the disconnect_event. Simulate the disconnect
* event by calling the function directly. Sometimes
* disconnect_event will be received when the debug logs
* are collected.
*/
if (discon_issued)
ath6kl_disconnect_event(ar, DISCONNECT_CMD,
(ar->nw_type & AP_NETWORK) ?
bcast_mac : ar->bssid,
0, NULL, 0);
ar->user_key_ctrl = 0;
} else {
ath6kl_dbg(ATH6KL_DBG_TRC,
"%s: wmi is not ready 0x%p 0x%p\n",
__func__, ar, ar->wmi);
/* Shut down WMI if we have started it */
if (test_bit(WMI_ENABLED, &ar->flag)) {
ath6kl_dbg(ATH6KL_DBG_TRC,
"%s: shut down wmi\n", __func__);
ath6kl_wmi_shutdown(ar->wmi);
clear_bit(WMI_ENABLED, &ar->flag);
ar->wmi = NULL;
}
}
if (ar->htc_target) {
ath6kl_dbg(ATH6KL_DBG_TRC, "%s: shut down htc\n", __func__);
ath6kl_htc_stop(ar->htc_target);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
/*
* Try to reset the device if we can. The driver may have been
* configure NOT to reset the target during a debug session.
*/
ath6kl_dbg(ATH6KL_DBG_TRC,
"attempting to reset target on instance destroy\n");
ath6kl_reset_device(ar, ar->target_type, true, true);
}
static void ath6kl_install_static_wep_keys(struct ath6kl *ar)
{
u8 index;
u8 keyusage;
for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) {
if (ar->wep_key_list[index].key_len) {
keyusage = GROUP_USAGE;
if (index == ar->def_txkey_index)
keyusage |= TX_USAGE;
ath6kl_wmi_addkey_cmd(ar->wmi,
index,
WEP_CRYPT,
keyusage,
ar->wep_key_list[index].key_len,
NULL,
ar->wep_key_list[index].key,
KEY_OP_INIT_VAL, NULL,
NO_SYNC_WMIFLAG);
}
}
}
void ath6kl_connect_ap_mode_bss(struct ath6kl *ar, u16 channel)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
{
struct ath6kl_req_key *ik;
int res;
u8 key_rsc[ATH6KL_KEY_SEQ_LEN];
/* TODO: Pass vif instead of taking it from ar */
struct ath6kl_vif *vif = ar->vif;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
ik = &ar->ap_mode_bkey;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "AP mode started on %u MHz\n", channel);
switch (ar->auth_mode) {
case NONE_AUTH:
if (ar->prwise_crypto == WEP_CRYPT)
ath6kl_install_static_wep_keys(ar);
break;
case WPA_PSK_AUTH:
case WPA2_PSK_AUTH:
case (WPA_PSK_AUTH | WPA2_PSK_AUTH):
if (!ik->valid)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
break;
ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "Delayed addkey for "
"the initial group key for AP mode\n");
memset(key_rsc, 0, sizeof(key_rsc));
res = ath6kl_wmi_addkey_cmd(
ar->wmi, ik->key_index, ik->key_type,
GROUP_USAGE, ik->key_len, key_rsc, ik->key,
KEY_OP_INIT_VAL, NULL, SYNC_BOTH_WMIFLAG);
if (res) {
ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "Delayed "
"addkey failed: %d\n", res);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
break;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
ath6kl_wmi_bssfilter_cmd(ar->wmi, NONE_BSS_FILTER, 0);
set_bit(CONNECTED, &vif->flags);
netif_carrier_on(ar->net_dev);
}
void ath6kl_connect_ap_mode_sta(struct ath6kl *ar, u16 aid, u8 *mac_addr,
u8 keymgmt, u8 ucipher, u8 auth,
u8 assoc_req_len, u8 *assoc_info)
{
u8 *ies = NULL, *wpa_ie = NULL, *pos;
size_t ies_len = 0;
struct station_info sinfo;
ath6kl_dbg(ATH6KL_DBG_TRC, "new station %pM aid=%d\n", mac_addr, aid);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
if (assoc_req_len > sizeof(struct ieee80211_hdr_3addr)) {
struct ieee80211_mgmt *mgmt =
(struct ieee80211_mgmt *) assoc_info;
if (ieee80211_is_assoc_req(mgmt->frame_control) &&
assoc_req_len >= sizeof(struct ieee80211_hdr_3addr) +
sizeof(mgmt->u.assoc_req)) {
ies = mgmt->u.assoc_req.variable;
ies_len = assoc_info + assoc_req_len - ies;
} else if (ieee80211_is_reassoc_req(mgmt->frame_control) &&
assoc_req_len >= sizeof(struct ieee80211_hdr_3addr)
+ sizeof(mgmt->u.reassoc_req)) {
ies = mgmt->u.reassoc_req.variable;
ies_len = assoc_info + assoc_req_len - ies;
}
}
pos = ies;
while (pos && pos + 1 < ies + ies_len) {
if (pos + 2 + pos[1] > ies + ies_len)
break;
if (pos[0] == WLAN_EID_RSN)
wpa_ie = pos; /* RSN IE */
else if (pos[0] == WLAN_EID_VENDOR_SPECIFIC &&
pos[1] >= 4 &&
pos[2] == 0x00 && pos[3] == 0x50 && pos[4] == 0xf2) {
if (pos[5] == 0x01)
wpa_ie = pos; /* WPA IE */
else if (pos[5] == 0x04) {
wpa_ie = pos; /* WPS IE */
break; /* overrides WPA/RSN IE */
}
}
pos += 2 + pos[1];
}
ath6kl_add_new_sta(ar, mac_addr, aid, wpa_ie,
wpa_ie ? 2 + wpa_ie[1] : 0,
keymgmt, ucipher, auth);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/* send event to application */
memset(&sinfo, 0, sizeof(sinfo));
/* TODO: sinfo.generation */
sinfo.assoc_req_ies = ies;
sinfo.assoc_req_ies_len = ies_len;
sinfo.filled |= STATION_INFO_ASSOC_REQ_IES;
cfg80211_new_sta(ar->net_dev, mac_addr, &sinfo, GFP_KERNEL);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
netif_wake_queue(ar->net_dev);
}
/* Functions for Tx credit handling */
void ath6k_credit_init(struct htc_credit_state_info *cred_info,
struct list_head *ep_list,
int tot_credits)
{
struct htc_endpoint_credit_dist *cur_ep_dist;
int count;
cred_info->cur_free_credits = tot_credits;
cred_info->total_avail_credits = tot_credits;
list_for_each_entry(cur_ep_dist, ep_list, list) {
if (cur_ep_dist->endpoint == ENDPOINT_0)
continue;
cur_ep_dist->cred_min = cur_ep_dist->cred_per_msg;
if (tot_credits > 4)
if ((cur_ep_dist->svc_id == WMI_DATA_BK_SVC) ||
(cur_ep_dist->svc_id == WMI_DATA_BE_SVC)) {
ath6kl_deposit_credit_to_ep(cred_info,
cur_ep_dist,
cur_ep_dist->cred_min);
cur_ep_dist->dist_flags |= HTC_EP_ACTIVE;
}
if (cur_ep_dist->svc_id == WMI_CONTROL_SVC) {
ath6kl_deposit_credit_to_ep(cred_info, cur_ep_dist,
cur_ep_dist->cred_min);
/*
* Control service is always marked active, it
* never goes inactive EVER.
*/
cur_ep_dist->dist_flags |= HTC_EP_ACTIVE;
} else if (cur_ep_dist->svc_id == WMI_DATA_BK_SVC)
/* this is the lowest priority data endpoint */
cred_info->lowestpri_ep_dist = cur_ep_dist->list;
/*
* Streams have to be created (explicit | implicit) for all
* kinds of traffic. BE endpoints are also inactive in the
* beginning. When BE traffic starts it creates implicit
* streams that redistributes credits.
*
* Note: all other endpoints have minimums set but are
* initially given NO credits. credits will be distributed
* as traffic activity demands
*/
}
WARN_ON(cred_info->cur_free_credits <= 0);
list_for_each_entry(cur_ep_dist, ep_list, list) {
if (cur_ep_dist->endpoint == ENDPOINT_0)
continue;
if (cur_ep_dist->svc_id == WMI_CONTROL_SVC)
cur_ep_dist->cred_norm = cur_ep_dist->cred_per_msg;
else {
/*
* For the remaining data endpoints, we assume that
* each cred_per_msg are the same. We use a simple
* calculation here, we take the remaining credits
* and determine how many max messages this can
* cover and then set each endpoint's normal value
* equal to 3/4 this amount.
*/
count = (cred_info->cur_free_credits /
cur_ep_dist->cred_per_msg)
* cur_ep_dist->cred_per_msg;
count = (count * 3) >> 2;
count = max(count, cur_ep_dist->cred_per_msg);
cur_ep_dist->cred_norm = count;
}
}
}
/* initialize and setup credit distribution */
int ath6k_setup_credit_dist(void *htc_handle,
struct htc_credit_state_info *cred_info)
{
u16 servicepriority[5];
memset(cred_info, 0, sizeof(struct htc_credit_state_info));
servicepriority[0] = WMI_CONTROL_SVC; /* highest */
servicepriority[1] = WMI_DATA_VO_SVC;
servicepriority[2] = WMI_DATA_VI_SVC;
servicepriority[3] = WMI_DATA_BE_SVC;
servicepriority[4] = WMI_DATA_BK_SVC; /* lowest */
/* set priority list */
ath6kl_htc_set_credit_dist(htc_handle, cred_info, servicepriority, 5);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
return 0;
}
/* reduce an ep's credits back to a set limit */
static void ath6k_reduce_credits(struct htc_credit_state_info *cred_info,
struct htc_endpoint_credit_dist *ep_dist,
int limit)
{
int credits;
ep_dist->cred_assngd = limit;
if (ep_dist->credits <= limit)
return;
credits = ep_dist->credits - limit;
ep_dist->credits -= credits;
cred_info->cur_free_credits += credits;
}
static void ath6k_credit_update(struct htc_credit_state_info *cred_info,
struct list_head *epdist_list)
{
struct htc_endpoint_credit_dist *cur_dist_list;
list_for_each_entry(cur_dist_list, epdist_list, list) {
if (cur_dist_list->endpoint == ENDPOINT_0)
continue;
if (cur_dist_list->cred_to_dist > 0) {
cur_dist_list->credits +=
cur_dist_list->cred_to_dist;
cur_dist_list->cred_to_dist = 0;
if (cur_dist_list->credits >
cur_dist_list->cred_assngd)
ath6k_reduce_credits(cred_info,
cur_dist_list,
cur_dist_list->cred_assngd);
if (cur_dist_list->credits >
cur_dist_list->cred_norm)
ath6k_reduce_credits(cred_info, cur_dist_list,
cur_dist_list->cred_norm);
if (!(cur_dist_list->dist_flags & HTC_EP_ACTIVE)) {
if (cur_dist_list->txq_depth == 0)
ath6k_reduce_credits(cred_info,
cur_dist_list, 0);
}
}
}
}
/*
* HTC has an endpoint that needs credits, ep_dist is the endpoint in
* question.
*/
void ath6k_seek_credits(struct htc_credit_state_info *cred_info,
struct htc_endpoint_credit_dist *ep_dist)
{
struct htc_endpoint_credit_dist *curdist_list;
int credits = 0;
int need;
if (ep_dist->svc_id == WMI_CONTROL_SVC)
goto out;
if ((ep_dist->svc_id == WMI_DATA_VI_SVC) ||
(ep_dist->svc_id == WMI_DATA_VO_SVC))
if ((ep_dist->cred_assngd >= ep_dist->cred_norm))
goto out;
/*
* For all other services, we follow a simple algorithm of:
*
* 1. checking the free pool for credits
* 2. checking lower priority endpoints for credits to take
*/
credits = min(cred_info->cur_free_credits, ep_dist->seek_cred);
if (credits >= ep_dist->seek_cred)
goto out;
/*
* We don't have enough in the free pool, try taking away from
* lower priority services The rule for taking away credits:
*
* 1. Only take from lower priority endpoints
* 2. Only take what is allocated above the minimum (never
* starve an endpoint completely)
* 3. Only take what you need.
*/
list_for_each_entry_reverse(curdist_list,
&cred_info->lowestpri_ep_dist,
list) {
if (curdist_list == ep_dist)
break;
need = ep_dist->seek_cred - cred_info->cur_free_credits;
if ((curdist_list->cred_assngd - need) >=
curdist_list->cred_min) {
/*
* The current one has been allocated more than
* it's minimum and it has enough credits assigned
* above it's minimum to fulfill our need try to
* take away just enough to fulfill our need.
*/
ath6k_reduce_credits(cred_info, curdist_list,
curdist_list->cred_assngd - need);
if (cred_info->cur_free_credits >=
ep_dist->seek_cred)
break;
}
if (curdist_list->endpoint == ENDPOINT_0)
break;
}
credits = min(cred_info->cur_free_credits, ep_dist->seek_cred);
out:
/* did we find some credits? */
if (credits)
ath6kl_deposit_credit_to_ep(cred_info, ep_dist, credits);
ep_dist->seek_cred = 0;
}
/* redistribute credits based on activity change */
static void ath6k_redistribute_credits(struct htc_credit_state_info *info,
struct list_head *ep_dist_list)
{
struct htc_endpoint_credit_dist *curdist_list;
list_for_each_entry(curdist_list, ep_dist_list, list) {
if (curdist_list->endpoint == ENDPOINT_0)
continue;
if ((curdist_list->svc_id == WMI_DATA_BK_SVC) ||
(curdist_list->svc_id == WMI_DATA_BE_SVC))
curdist_list->dist_flags |= HTC_EP_ACTIVE;
if ((curdist_list->svc_id != WMI_CONTROL_SVC) &&
!(curdist_list->dist_flags & HTC_EP_ACTIVE)) {
if (curdist_list->txq_depth == 0)
ath6k_reduce_credits(info,
curdist_list, 0);
else
ath6k_reduce_credits(info,
curdist_list,
curdist_list->cred_min);
}
}
}
/*
*
* This function is invoked whenever endpoints require credit
* distributions. A lock is held while this function is invoked, this
* function shall NOT block. The ep_dist_list is a list of distribution
* structures in prioritized order as defined by the call to the
* htc_set_credit_dist() api.
*/
void ath6k_credit_distribute(struct htc_credit_state_info *cred_info,
struct list_head *ep_dist_list,
enum htc_credit_dist_reason reason)
{
switch (reason) {
case HTC_CREDIT_DIST_SEND_COMPLETE:
ath6k_credit_update(cred_info, ep_dist_list);
break;
case HTC_CREDIT_DIST_ACTIVITY_CHANGE:
ath6k_redistribute_credits(cred_info, ep_dist_list);
break;
default:
break;
}
WARN_ON(cred_info->cur_free_credits > cred_info->total_avail_credits);
WARN_ON(cred_info->cur_free_credits < 0);
}
void disconnect_timer_handler(unsigned long ptr)
{
struct net_device *dev = (struct net_device *)ptr;
struct ath6kl *ar = ath6kl_priv(dev);
ath6kl_init_profile_info(ar);
ath6kl_disconnect(ar);
}
void ath6kl_disconnect(struct ath6kl *ar)
{
/* TODO: Pass vif instead of taking it from ar */
struct ath6kl_vif *vif = ar->vif;
if (test_bit(CONNECTED, &vif->flags) ||
test_bit(CONNECT_PEND, &vif->flags)) {
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
ath6kl_wmi_disconnect_cmd(ar->wmi);
/*
* Disconnect command is issued, clear the connect pending
* flag. The connected flag will be cleared in
* disconnect event notification.
*/
clear_bit(CONNECT_PEND, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
}
void ath6kl_deep_sleep_enable(struct ath6kl *ar)
{
/* TODO: Pass vif instead of taking it from ar */
struct ath6kl_vif *vif = ar->vif;
switch (ar->sme_state) {
case SME_CONNECTING:
cfg80211_connect_result(ar->net_dev, ar->bssid, NULL, 0,
NULL, 0,
WLAN_STATUS_UNSPECIFIED_FAILURE,
GFP_KERNEL);
break;
case SME_CONNECTED:
default:
/*
* FIXME: oddly enough smeState is in DISCONNECTED during
* suspend, why? Need to send disconnected event in that
* state.
*/
cfg80211_disconnected(ar->net_dev, 0, NULL, 0, GFP_KERNEL);
break;
}
if (test_bit(CONNECTED, &vif->flags) ||
test_bit(CONNECT_PEND, &vif->flags))
ath6kl_wmi_disconnect_cmd(ar->wmi);
ar->sme_state = SME_DISCONNECTED;
/* disable scanning */
if (ath6kl_wmi_scanparams_cmd(ar->wmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0,
0, 0) != 0)
printk(KERN_WARNING "ath6kl: failed to disable scan "
"during suspend\n");
ath6kl_cfg80211_scan_complete_event(ar, -ECANCELED);
/* save the current power mode before enabling power save */
ar->wmi->saved_pwr_mode = ar->wmi->pwr_mode;
if (ath6kl_wmi_powermode_cmd(ar->wmi, REC_POWER) != 0)
ath6kl_warn("ath6kl_deep_sleep_enable: "
"wmi_powermode_cmd failed\n");
}
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/* WMI Event handlers */
static const char *get_hw_id_string(u32 id)
{
switch (id) {
case AR6003_REV1_VERSION:
return "1.0";
case AR6003_REV2_VERSION:
return "2.0";
case AR6003_REV3_VERSION:
return "2.1.1";
default:
return "unknown";
}
}
void ath6kl_ready_event(void *devt, u8 *datap, u32 sw_ver, u32 abi_ver)
{
struct ath6kl *ar = devt;
struct net_device *dev = ar->net_dev;
memcpy(dev->dev_addr, datap, ETH_ALEN);
ath6kl_dbg(ATH6KL_DBG_TRC, "%s: mac addr = %pM\n",
__func__, dev->dev_addr);
ar->version.wlan_ver = sw_ver;
ar->version.abi_ver = abi_ver;
snprintf(ar->wiphy->fw_version,
sizeof(ar->wiphy->fw_version),
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
"%u.%u.%u.%u",
(ar->version.wlan_ver & 0xf0000000) >> 28,
(ar->version.wlan_ver & 0x0f000000) >> 24,
(ar->version.wlan_ver & 0x00ff0000) >> 16,
(ar->version.wlan_ver & 0x0000ffff));
/* indicate to the waiting thread that the ready event was received */
set_bit(WMI_READY, &ar->flag);
wake_up(&ar->event_wq);
ath6kl_info("hw %s fw %s%s\n",
get_hw_id_string(ar->wiphy->hw_version),
ar->wiphy->fw_version,
test_bit(TESTMODE, &ar->flag) ? " testmode" : "");
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
void ath6kl_scan_complete_evt(struct ath6kl *ar, int status)
{
/* TODO: Pass vif instead of taking it from ar */
struct ath6kl_vif *vif = ar->vif;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
ath6kl_cfg80211_scan_complete_event(ar, status);
if (!ar->usr_bss_filter) {
clear_bit(CLEAR_BSSFILTER_ON_BEACON, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
ath6kl_wmi_bssfilter_cmd(ar->wmi, NONE_BSS_FILTER, 0);
}
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
ath6kl_dbg(ATH6KL_DBG_WLAN_SCAN, "scan complete: %d\n", status);
}
void ath6kl_connect_event(struct ath6kl *ar, u16 channel, u8 *bssid,
u16 listen_int, u16 beacon_int,
enum network_type net_type, u8 beacon_ie_len,
u8 assoc_req_len, u8 assoc_resp_len,
u8 *assoc_info)
{
/* TODO: findout vif instead of taking it from ar */
struct ath6kl_vif *vif = ar->vif;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
ath6kl_cfg80211_connect_event(ar, channel, bssid,
listen_int, beacon_int,
net_type, beacon_ie_len,
assoc_req_len, assoc_resp_len,
assoc_info);
memcpy(ar->bssid, bssid, sizeof(ar->bssid));
ar->bss_ch = channel;
if ((ar->nw_type == INFRA_NETWORK))
ath6kl_wmi_listeninterval_cmd(ar->wmi, ar->listen_intvl_t,
ar->listen_intvl_b);
netif_wake_queue(ar->net_dev);
/* Update connect & link status atomically */
spin_lock_bh(&ar->lock);
set_bit(CONNECTED, &vif->flags);
clear_bit(CONNECT_PEND, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
netif_carrier_on(ar->net_dev);
spin_unlock_bh(&ar->lock);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
aggr_reset_state(ar->aggr_cntxt);
ar->reconnect_flag = 0;
if ((ar->nw_type == ADHOC_NETWORK) && ar->ibss_ps_enable) {
memset(ar->node_map, 0, sizeof(ar->node_map));
ar->node_num = 0;
ar->next_ep_id = ENDPOINT_2;
}
if (!ar->usr_bss_filter) {
set_bit(CLEAR_BSSFILTER_ON_BEACON, &vif->flags);
ath6kl_wmi_bssfilter_cmd(ar->wmi, CURRENT_BSS_FILTER, 0);
}
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
void ath6kl_tkip_micerr_event(struct ath6kl *ar, u8 keyid, bool ismcast)
{
struct ath6kl_sta *sta;
u8 tsc[6];
/*
* For AP case, keyid will have aid of STA which sent pkt with
* MIC error. Use this aid to get MAC & send it to hostapd.
*/
if (ar->nw_type == AP_NETWORK) {
sta = ath6kl_find_sta_by_aid(ar, (keyid >> 2));
if (!sta)
return;
ath6kl_dbg(ATH6KL_DBG_TRC,
"ap tkip mic error received from aid=%d\n", keyid);
memset(tsc, 0, sizeof(tsc)); /* FIX: get correct TSC */
cfg80211_michael_mic_failure(ar->net_dev, sta->mac,
NL80211_KEYTYPE_PAIRWISE, keyid,
tsc, GFP_KERNEL);
} else
ath6kl_cfg80211_tkip_micerr_event(ar, keyid, ismcast);
}
static void ath6kl_update_target_stats(struct ath6kl *ar, u8 *ptr, u32 len)
{
struct wmi_target_stats *tgt_stats =
(struct wmi_target_stats *) ptr;
struct target_stats *stats = &ar->target_stats;
struct tkip_ccmp_stats *ccmp_stats;
u8 ac;
if (len < sizeof(*tgt_stats))
return;
ath6kl_dbg(ATH6KL_DBG_TRC, "updating target stats\n");
stats->tx_pkt += le32_to_cpu(tgt_stats->stats.tx.pkt);
stats->tx_byte += le32_to_cpu(tgt_stats->stats.tx.byte);
stats->tx_ucast_pkt += le32_to_cpu(tgt_stats->stats.tx.ucast_pkt);
stats->tx_ucast_byte += le32_to_cpu(tgt_stats->stats.tx.ucast_byte);
stats->tx_mcast_pkt += le32_to_cpu(tgt_stats->stats.tx.mcast_pkt);
stats->tx_mcast_byte += le32_to_cpu(tgt_stats->stats.tx.mcast_byte);
stats->tx_bcast_pkt += le32_to_cpu(tgt_stats->stats.tx.bcast_pkt);
stats->tx_bcast_byte += le32_to_cpu(tgt_stats->stats.tx.bcast_byte);
stats->tx_rts_success_cnt +=
le32_to_cpu(tgt_stats->stats.tx.rts_success_cnt);
for (ac = 0; ac < WMM_NUM_AC; ac++)
stats->tx_pkt_per_ac[ac] +=
le32_to_cpu(tgt_stats->stats.tx.pkt_per_ac[ac]);
stats->tx_err += le32_to_cpu(tgt_stats->stats.tx.err);
stats->tx_fail_cnt += le32_to_cpu(tgt_stats->stats.tx.fail_cnt);
stats->tx_retry_cnt += le32_to_cpu(tgt_stats->stats.tx.retry_cnt);
stats->tx_mult_retry_cnt +=
le32_to_cpu(tgt_stats->stats.tx.mult_retry_cnt);
stats->tx_rts_fail_cnt +=
le32_to_cpu(tgt_stats->stats.tx.rts_fail_cnt);
stats->tx_ucast_rate =
ath6kl_wmi_get_rate(a_sle32_to_cpu(tgt_stats->stats.tx.ucast_rate));
stats->rx_pkt += le32_to_cpu(tgt_stats->stats.rx.pkt);
stats->rx_byte += le32_to_cpu(tgt_stats->stats.rx.byte);
stats->rx_ucast_pkt += le32_to_cpu(tgt_stats->stats.rx.ucast_pkt);
stats->rx_ucast_byte += le32_to_cpu(tgt_stats->stats.rx.ucast_byte);
stats->rx_mcast_pkt += le32_to_cpu(tgt_stats->stats.rx.mcast_pkt);
stats->rx_mcast_byte += le32_to_cpu(tgt_stats->stats.rx.mcast_byte);
stats->rx_bcast_pkt += le32_to_cpu(tgt_stats->stats.rx.bcast_pkt);
stats->rx_bcast_byte += le32_to_cpu(tgt_stats->stats.rx.bcast_byte);
stats->rx_frgment_pkt += le32_to_cpu(tgt_stats->stats.rx.frgment_pkt);
stats->rx_err += le32_to_cpu(tgt_stats->stats.rx.err);
stats->rx_crc_err += le32_to_cpu(tgt_stats->stats.rx.crc_err);
stats->rx_key_cache_miss +=
le32_to_cpu(tgt_stats->stats.rx.key_cache_miss);
stats->rx_decrypt_err += le32_to_cpu(tgt_stats->stats.rx.decrypt_err);
stats->rx_dupl_frame += le32_to_cpu(tgt_stats->stats.rx.dupl_frame);
stats->rx_ucast_rate =
ath6kl_wmi_get_rate(a_sle32_to_cpu(tgt_stats->stats.rx.ucast_rate));
ccmp_stats = &tgt_stats->stats.tkip_ccmp_stats;
stats->tkip_local_mic_fail +=
le32_to_cpu(ccmp_stats->tkip_local_mic_fail);
stats->tkip_cnter_measures_invoked +=
le32_to_cpu(ccmp_stats->tkip_cnter_measures_invoked);
stats->tkip_fmt_err += le32_to_cpu(ccmp_stats->tkip_fmt_err);
stats->ccmp_fmt_err += le32_to_cpu(ccmp_stats->ccmp_fmt_err);
stats->ccmp_replays += le32_to_cpu(ccmp_stats->ccmp_replays);
stats->pwr_save_fail_cnt +=
le32_to_cpu(tgt_stats->pm_stats.pwr_save_failure_cnt);
stats->noise_floor_calib =
a_sle32_to_cpu(tgt_stats->noise_floor_calib);
stats->cs_bmiss_cnt +=
le32_to_cpu(tgt_stats->cserv_stats.cs_bmiss_cnt);
stats->cs_low_rssi_cnt +=
le32_to_cpu(tgt_stats->cserv_stats.cs_low_rssi_cnt);
stats->cs_connect_cnt +=
le16_to_cpu(tgt_stats->cserv_stats.cs_connect_cnt);
stats->cs_discon_cnt +=
le16_to_cpu(tgt_stats->cserv_stats.cs_discon_cnt);
stats->cs_ave_beacon_rssi =
a_sle16_to_cpu(tgt_stats->cserv_stats.cs_ave_beacon_rssi);
stats->cs_last_roam_msec =
tgt_stats->cserv_stats.cs_last_roam_msec;
stats->cs_snr = tgt_stats->cserv_stats.cs_snr;
stats->cs_rssi = a_sle16_to_cpu(tgt_stats->cserv_stats.cs_rssi);
stats->lq_val = le32_to_cpu(tgt_stats->lq_val);
stats->wow_pkt_dropped +=
le32_to_cpu(tgt_stats->wow_stats.wow_pkt_dropped);
stats->wow_host_pkt_wakeups +=
tgt_stats->wow_stats.wow_host_pkt_wakeups;
stats->wow_host_evt_wakeups +=
tgt_stats->wow_stats.wow_host_evt_wakeups;
stats->wow_evt_discarded +=
le16_to_cpu(tgt_stats->wow_stats.wow_evt_discarded);
if (test_bit(STATS_UPDATE_PEND, &ar->flag)) {
clear_bit(STATS_UPDATE_PEND, &ar->flag);
wake_up(&ar->event_wq);
}
}
static void ath6kl_add_le32(__le32 *var, __le32 val)
{
*var = cpu_to_le32(le32_to_cpu(*var) + le32_to_cpu(val));
}
void ath6kl_tgt_stats_event(struct ath6kl *ar, u8 *ptr, u32 len)
{
struct wmi_ap_mode_stat *p = (struct wmi_ap_mode_stat *) ptr;
struct wmi_ap_mode_stat *ap = &ar->ap_stats;
struct wmi_per_sta_stat *st_ap, *st_p;
u8 ac;
if (ar->nw_type == AP_NETWORK) {
if (len < sizeof(*p))
return;
for (ac = 0; ac < AP_MAX_NUM_STA; ac++) {
st_ap = &ap->sta[ac];
st_p = &p->sta[ac];
ath6kl_add_le32(&st_ap->tx_bytes, st_p->tx_bytes);
ath6kl_add_le32(&st_ap->tx_pkts, st_p->tx_pkts);
ath6kl_add_le32(&st_ap->tx_error, st_p->tx_error);
ath6kl_add_le32(&st_ap->tx_discard, st_p->tx_discard);
ath6kl_add_le32(&st_ap->rx_bytes, st_p->rx_bytes);
ath6kl_add_le32(&st_ap->rx_pkts, st_p->rx_pkts);
ath6kl_add_le32(&st_ap->rx_error, st_p->rx_error);
ath6kl_add_le32(&st_ap->rx_discard, st_p->rx_discard);
}
} else {
ath6kl_update_target_stats(ar, ptr, len);
}
}
void ath6kl_wakeup_event(void *dev)
{
struct ath6kl *ar = (struct ath6kl *) dev;
wake_up(&ar->event_wq);
}
void ath6kl_txpwr_rx_evt(void *devt, u8 tx_pwr)
{
struct ath6kl *ar = (struct ath6kl *) devt;
ar->tx_pwr = tx_pwr;
wake_up(&ar->event_wq);
}
void ath6kl_pspoll_event(struct ath6kl *ar, u8 aid)
{
struct ath6kl_sta *conn;
struct sk_buff *skb;
bool psq_empty = false;
conn = ath6kl_find_sta_by_aid(ar, aid);
if (!conn)
return;
/*
* Send out a packet queued on ps queue. When the ps queue
* becomes empty update the PVB for this station.
*/
spin_lock_bh(&conn->psq_lock);
psq_empty = skb_queue_empty(&conn->psq);
spin_unlock_bh(&conn->psq_lock);
if (psq_empty)
/* TODO: Send out a NULL data frame */
return;
spin_lock_bh(&conn->psq_lock);
skb = skb_dequeue(&conn->psq);
spin_unlock_bh(&conn->psq_lock);
conn->sta_flags |= STA_PS_POLLED;
ath6kl_data_tx(skb, ar->net_dev);
conn->sta_flags &= ~STA_PS_POLLED;
spin_lock_bh(&conn->psq_lock);
psq_empty = skb_queue_empty(&conn->psq);
spin_unlock_bh(&conn->psq_lock);
if (psq_empty)
ath6kl_wmi_set_pvb_cmd(ar->wmi, conn->aid, 0);
}
void ath6kl_dtimexpiry_event(struct ath6kl *ar)
{
bool mcastq_empty = false;
struct sk_buff *skb;
/* TODO: Pass vif instead of taking it from ar */
struct ath6kl_vif *vif = ar->vif;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/*
* If there are no associated STAs, ignore the DTIM expiry event.
* There can be potential race conditions where the last associated
* STA may disconnect & before the host could clear the 'Indicate
* DTIM' request to the firmware, the firmware would have just
* indicated a DTIM expiry event. The race is between 'clear DTIM
* expiry cmd' going from the host to the firmware & the DTIM
* expiry event happening from the firmware to the host.
*/
if (!ar->sta_list_index)
return;
spin_lock_bh(&ar->mcastpsq_lock);
mcastq_empty = skb_queue_empty(&ar->mcastpsq);
spin_unlock_bh(&ar->mcastpsq_lock);
if (mcastq_empty)
return;
/* set the STA flag to dtim_expired for the frame to go out */
set_bit(DTIM_EXPIRED, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
spin_lock_bh(&ar->mcastpsq_lock);
while ((skb = skb_dequeue(&ar->mcastpsq)) != NULL) {
spin_unlock_bh(&ar->mcastpsq_lock);
ath6kl_data_tx(skb, ar->net_dev);
spin_lock_bh(&ar->mcastpsq_lock);
}
spin_unlock_bh(&ar->mcastpsq_lock);
clear_bit(DTIM_EXPIRED, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/* clear the LSB of the BitMapCtl field of the TIM IE */
ath6kl_wmi_set_pvb_cmd(ar->wmi, MCAST_AID, 0);
}
void ath6kl_disconnect_event(struct ath6kl *ar, u8 reason, u8 *bssid,
u8 assoc_resp_len, u8 *assoc_info,
u16 prot_reason_status)
{
/* TODO: Findout vif instead of taking it from ar */
struct ath6kl_vif *vif = ar->vif;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
if (ar->nw_type == AP_NETWORK) {
if (!ath6kl_remove_sta(ar, bssid, prot_reason_status))
return;
/* if no more associated STAs, empty the mcast PS q */
if (ar->sta_list_index == 0) {
spin_lock_bh(&ar->mcastpsq_lock);
skb_queue_purge(&ar->mcastpsq);
spin_unlock_bh(&ar->mcastpsq_lock);
/* clear the LSB of the TIM IE's BitMapCtl field */
if (test_bit(WMI_READY, &ar->flag))
ath6kl_wmi_set_pvb_cmd(ar->wmi, MCAST_AID, 0);
}
if (!is_broadcast_ether_addr(bssid)) {
/* send event to application */
cfg80211_del_sta(ar->net_dev, bssid, GFP_KERNEL);
}
if (memcmp(ar->net_dev->dev_addr, bssid, ETH_ALEN) == 0) {
memset(ar->wep_key_list, 0, sizeof(ar->wep_key_list));
clear_bit(CONNECTED, &vif->flags);
}
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
return;
}
ath6kl_cfg80211_disconnect_event(ar, reason, bssid,
assoc_resp_len, assoc_info,
prot_reason_status);
aggr_reset_state(ar->aggr_cntxt);
del_timer(&ar->disconnect_timer);
ath6kl_dbg(ATH6KL_DBG_WLAN_CONNECT,
"disconnect reason is %d\n", reason);
/*
* If the event is due to disconnect cmd from the host, only they
* the target would stop trying to connect. Under any other
* condition, target would keep trying to connect.
*/
if (reason == DISCONNECT_CMD) {
if (!ar->usr_bss_filter && test_bit(WMI_READY, &ar->flag))
ath6kl_wmi_bssfilter_cmd(ar->wmi, NONE_BSS_FILTER, 0);
} else {
set_bit(CONNECT_PEND, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
if (((reason == ASSOC_FAILED) &&
(prot_reason_status == 0x11)) ||
((reason == ASSOC_FAILED) && (prot_reason_status == 0x0)
&& (ar->reconnect_flag == 1))) {
set_bit(CONNECTED, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
return;
}
}
/* update connect & link status atomically */
spin_lock_bh(&ar->lock);
clear_bit(CONNECTED, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
netif_carrier_off(ar->net_dev);
spin_unlock_bh(&ar->lock);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
if ((reason != CSERV_DISCONNECT) || (ar->reconnect_flag != 1))
ar->reconnect_flag = 0;
if (reason != CSERV_DISCONNECT)
ar->user_key_ctrl = 0;
netif_stop_queue(ar->net_dev);
memset(ar->bssid, 0, sizeof(ar->bssid));
ar->bss_ch = 0;
ath6kl_tx_data_cleanup(ar);
}
static int ath6kl_open(struct net_device *dev)
{
struct ath6kl *ar = ath6kl_priv(dev);
struct ath6kl_vif *vif = netdev_priv(dev);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
spin_lock_bh(&ar->lock);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
set_bit(WLAN_ENABLED, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
if (test_bit(CONNECTED, &vif->flags)) {
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
netif_carrier_on(dev);
netif_wake_queue(dev);
} else
netif_carrier_off(dev);
spin_unlock_bh(&ar->lock);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
return 0;
}
static int ath6kl_close(struct net_device *dev)
{
struct ath6kl *ar = ath6kl_priv(dev);
struct ath6kl_vif *vif = netdev_priv(dev);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
netif_stop_queue(dev);
ath6kl_disconnect(ar);
if (test_bit(WMI_READY, &ar->flag)) {
if (ath6kl_wmi_scanparams_cmd(ar->wmi, 0xFFFF, 0, 0, 0, 0, 0, 0,
0, 0, 0))
return -EIO;
clear_bit(WLAN_ENABLED, &vif->flags);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
}
ath6kl_cfg80211_scan_complete_event(ar, -ECANCELED);
return 0;
}
static struct net_device_stats *ath6kl_get_stats(struct net_device *dev)
{
struct ath6kl *ar = ath6kl_priv(dev);
return &ar->net_stats;
}
static struct net_device_ops ath6kl_netdev_ops = {
.ndo_open = ath6kl_open,
.ndo_stop = ath6kl_close,
.ndo_start_xmit = ath6kl_data_tx,
.ndo_get_stats = ath6kl_get_stats,
};
void init_netdev(struct net_device *dev)
{
dev->netdev_ops = &ath6kl_netdev_ops;
dev->watchdog_timeo = ATH6KL_TX_TIMEOUT;
dev->needed_headroom = ETH_HLEN;
dev->needed_headroom += sizeof(struct ath6kl_llc_snap_hdr) +
sizeof(struct wmi_data_hdr) + HTC_HDR_LENGTH
+ WMI_MAX_TX_META_SZ + ATH6KL_HTC_ALIGN_BYTES;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
return;
}