AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 22:39:20 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
5652e63df3
linux_dsm_epyc7002/net/sched/sch_taprio.c

1934 lines
48 KiB
C
Raw Normal View History

tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
// SPDX-License-Identifier: GPL-2.0
/* net/sched/sch_taprio.c Time Aware Priority Scheduler
*
* Authors: Vinicius Costa Gomes <vinicius.gomes@intel.com>
*
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
net/sched: taprio: fix build without 64bit div Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 03:51:57 +07:00
#include <linux/math64.h>
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
#include <linux/module.h>
#include <linux/spinlock.h>
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
#include <linux/rcupdate.h>
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <net/pkt_cls.h>
#include <net/sch_generic.h>
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
#include <net/sock.h>
taprio: Adjust timestamps for TCP packets When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:19 +07:00
#include <net/tcp.h>
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
static LIST_HEAD(taprio_list);
static DEFINE_SPINLOCK(taprio_list_lock);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
#define TAPRIO_ALL_GATES_OPEN -1
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
#define TXTIME_ASSIST_IS_ENABLED(flags) ((flags) & TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST)
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
#define FULL_OFFLOAD_IS_ENABLED(flags) ((flags) & TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD)
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
struct sched_entry {
struct list_head list;
/* The instant that this entry "closes" and the next one
* should open, the qdisc will make some effort so that no
* packet leaves after this time.
*/
ktime_t close_time;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
ktime_t next_txtime;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
atomic_t budget;
int index;
u32 gate_mask;
u32 interval;
u8 command;
};
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
struct sched_gate_list {
struct rcu_head rcu;
struct list_head entries;
size_t num_entries;
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
ktime_t cycle_close_time;
s64 cycle_time;
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:33 +07:00
s64 cycle_time_extension;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
s64 base_time;
};
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
struct taprio_sched {
struct Qdisc **qdiscs;
struct Qdisc *root;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
u32 flags;
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:18 +07:00
enum tk_offsets tk_offset;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
int clockid;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
atomic64_t picos_per_byte; /* Using picoseconds because for 10Gbps+
* speeds it's sub-nanoseconds per byte
*/
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
/* Protects the update side of the RCU protected current_entry */
spinlock_t current_entry_lock;
struct sched_entry __rcu *current_entry;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
struct sched_gate_list __rcu *oper_sched;
struct sched_gate_list __rcu *admin_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
struct hrtimer advance_timer;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
struct list_head taprio_list;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
struct sk_buff *(*dequeue)(struct Qdisc *sch);
struct sk_buff *(*peek)(struct Qdisc *sch);
fix: taprio: Change type of txtime-delay parameter to u32 During the review of the iproute2 patches for txtime-assist mode, it was pointed out that it does not make sense for the txtime-delay parameter to be negative. So, change the type of the parameter from s32 to u32. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17 02:52:18 +07:00
u32 txtime_delay;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
};
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
struct __tc_taprio_qopt_offload {
refcount_t users;
struct tc_taprio_qopt_offload offload;
};
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
static ktime_t sched_base_time(const struct sched_gate_list *sched)
{
if (!sched)
return KTIME_MAX;
return ns_to_ktime(sched->base_time);
}
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:18 +07:00
static ktime_t taprio_get_time(struct taprio_sched *q)
{
ktime_t mono = ktime_get();
switch (q->tk_offset) {
case TK_OFFS_MAX:
return mono;
default:
return ktime_mono_to_any(mono, q->tk_offset);
}
return KTIME_MAX;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
static void taprio_free_sched_cb(struct rcu_head *head)
{
struct sched_gate_list *sched = container_of(head, struct sched_gate_list, rcu);
struct sched_entry *entry, *n;
if (!sched)
return;
list_for_each_entry_safe(entry, n, &sched->entries, list) {
list_del(&entry->list);
kfree(entry);
}
kfree(sched);
}
static void switch_schedules(struct taprio_sched *q,
struct sched_gate_list **admin,
struct sched_gate_list **oper)
{
rcu_assign_pointer(q->oper_sched, *admin);
rcu_assign_pointer(q->admin_sched, NULL);
if (*oper)
call_rcu(&(*oper)->rcu, taprio_free_sched_cb);
*oper = *admin;
*admin = NULL;
}
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
/* Get how much time has been already elapsed in the current cycle. */
static s32 get_cycle_time_elapsed(struct sched_gate_list *sched, ktime_t time)
{
ktime_t time_since_sched_start;
s32 time_elapsed;
time_since_sched_start = ktime_sub(time, sched->base_time);
div_s64_rem(time_since_sched_start, sched->cycle_time, &time_elapsed);
return time_elapsed;
}
static ktime_t get_interval_end_time(struct sched_gate_list *sched,
struct sched_gate_list *admin,
struct sched_entry *entry,
ktime_t intv_start)
{
s32 cycle_elapsed = get_cycle_time_elapsed(sched, intv_start);
ktime_t intv_end, cycle_ext_end, cycle_end;
cycle_end = ktime_add_ns(intv_start, sched->cycle_time - cycle_elapsed);
intv_end = ktime_add_ns(intv_start, entry->interval);
cycle_ext_end = ktime_add(cycle_end, sched->cycle_time_extension);
if (ktime_before(intv_end, cycle_end))
return intv_end;
else if (admin && admin != sched &&
ktime_after(admin->base_time, cycle_end) &&
ktime_before(admin->base_time, cycle_ext_end))
return admin->base_time;
else
return cycle_end;
}
static int length_to_duration(struct taprio_sched *q, int len)
{
return div_u64(len * atomic64_read(&q->picos_per_byte), 1000);
}
/* Returns the entry corresponding to next available interval. If
* validate_interval is set, it only validates whether the timestamp occurs
* when the gate corresponding to the skb's traffic class is open.
*/
static struct sched_entry *find_entry_to_transmit(struct sk_buff *skb,
struct Qdisc *sch,
struct sched_gate_list *sched,
struct sched_gate_list *admin,
ktime_t time,
ktime_t *interval_start,
ktime_t *interval_end,
bool validate_interval)
{
ktime_t curr_intv_start, curr_intv_end, cycle_end, packet_transmit_time;
ktime_t earliest_txtime = KTIME_MAX, txtime, cycle, transmit_end_time;
struct sched_entry *entry = NULL, *entry_found = NULL;
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
bool entry_available = false;
s32 cycle_elapsed;
int tc, n;
tc = netdev_get_prio_tc_map(dev, skb->priority);
packet_transmit_time = length_to_duration(q, qdisc_pkt_len(skb));
*interval_start = 0;
*interval_end = 0;
if (!sched)
return NULL;
cycle = sched->cycle_time;
cycle_elapsed = get_cycle_time_elapsed(sched, time);
curr_intv_end = ktime_sub_ns(time, cycle_elapsed);
cycle_end = ktime_add_ns(curr_intv_end, cycle);
list_for_each_entry(entry, &sched->entries, list) {
curr_intv_start = curr_intv_end;
curr_intv_end = get_interval_end_time(sched, admin, entry,
curr_intv_start);
if (ktime_after(curr_intv_start, cycle_end))
break;
if (!(entry->gate_mask & BIT(tc)) ||
packet_transmit_time > entry->interval)
continue;
txtime = entry->next_txtime;
if (ktime_before(txtime, time) || validate_interval) {
transmit_end_time = ktime_add_ns(time, packet_transmit_time);
if ((ktime_before(curr_intv_start, time) &&
ktime_before(transmit_end_time, curr_intv_end)) ||
(ktime_after(curr_intv_start, time) && !validate_interval)) {
entry_found = entry;
*interval_start = curr_intv_start;
*interval_end = curr_intv_end;
break;
} else if (!entry_available && !validate_interval) {
/* Here, we are just trying to find out the
* first available interval in the next cycle.
*/
entry_available = 1;
entry_found = entry;
*interval_start = ktime_add_ns(curr_intv_start, cycle);
*interval_end = ktime_add_ns(curr_intv_end, cycle);
}
} else if (ktime_before(txtime, earliest_txtime) &&
!entry_available) {
earliest_txtime = txtime;
entry_found = entry;
n = div_s64(ktime_sub(txtime, curr_intv_start), cycle);
*interval_start = ktime_add(curr_intv_start, n * cycle);
*interval_end = ktime_add(curr_intv_end, n * cycle);
}
}
return entry_found;
}
static bool is_valid_interval(struct sk_buff *skb, struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
struct sched_gate_list *sched, *admin;
ktime_t interval_start, interval_end;
struct sched_entry *entry;
rcu_read_lock();
sched = rcu_dereference(q->oper_sched);
admin = rcu_dereference(q->admin_sched);
entry = find_entry_to_transmit(skb, sch, sched, admin, skb->tstamp,
&interval_start, &interval_end, true);
rcu_read_unlock();
return entry;
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
static bool taprio_flags_valid(u32 flags)
{
/* Make sure no other flag bits are set. */
if (flags & ~(TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST |
TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD))
return false;
/* txtime-assist and full offload are mutually exclusive */
if ((flags & TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST) &&
(flags & TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD))
return false;
return true;
}
taprio: Adjust timestamps for TCP packets When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:19 +07:00
/* This returns the tstamp value set by TCP in terms of the set clock. */
static ktime_t get_tcp_tstamp(struct taprio_sched *q, struct sk_buff *skb)
{
unsigned int offset = skb_network_offset(skb);
const struct ipv6hdr *ipv6h;
const struct iphdr *iph;
struct ipv6hdr _ipv6h;
ipv6h = skb_header_pointer(skb, offset, sizeof(_ipv6h), &_ipv6h);
if (!ipv6h)
return 0;
if (ipv6h->version == 4) {
iph = (struct iphdr *)ipv6h;
offset += iph->ihl * 4;
/* special-case 6in4 tunnelling, as that is a common way to get
* v6 connectivity in the home
*/
if (iph->protocol == IPPROTO_IPV6) {
ipv6h = skb_header_pointer(skb, offset,
sizeof(_ipv6h), &_ipv6h);
if (!ipv6h || ipv6h->nexthdr != IPPROTO_TCP)
return 0;
} else if (iph->protocol != IPPROTO_TCP) {
return 0;
}
} else if (ipv6h->version == 6 && ipv6h->nexthdr != IPPROTO_TCP) {
return 0;
}
return ktime_mono_to_any(skb->skb_mstamp_ns, q->tk_offset);
}
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
/* There are a few scenarios where we will have to modify the txtime from
* what is read from next_txtime in sched_entry. They are:
* 1. If txtime is in the past,
* a. The gate for the traffic class is currently open and packet can be
* transmitted before it closes, schedule the packet right away.
* b. If the gate corresponding to the traffic class is going to open later
* in the cycle, set the txtime of packet to the interval start.
* 2. If txtime is in the future, there are packets corresponding to the
* current traffic class waiting to be transmitted. So, the following
* possibilities exist:
* a. We can transmit the packet before the window containing the txtime
* closes.
* b. The window might close before the transmission can be completed
* successfully. So, schedule the packet in the next open window.
*/
static long get_packet_txtime(struct sk_buff *skb, struct Qdisc *sch)
{
taprio: Adjust timestamps for TCP packets When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:19 +07:00
ktime_t transmit_end_time, interval_end, interval_start, tcp_tstamp;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
struct taprio_sched *q = qdisc_priv(sch);
struct sched_gate_list *sched, *admin;
ktime_t minimum_time, now, txtime;
int len, packet_transmit_time;
struct sched_entry *entry;
bool sched_changed;
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:18 +07:00
now = taprio_get_time(q);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
minimum_time = ktime_add_ns(now, q->txtime_delay);
taprio: Adjust timestamps for TCP packets When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:19 +07:00
tcp_tstamp = get_tcp_tstamp(q, skb);
minimum_time = max_t(ktime_t, minimum_time, tcp_tstamp);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
rcu_read_lock();
admin = rcu_dereference(q->admin_sched);
sched = rcu_dereference(q->oper_sched);
if (admin && ktime_after(minimum_time, admin->base_time))
switch_schedules(q, &admin, &sched);
/* Until the schedule starts, all the queues are open */
if (!sched || ktime_before(minimum_time, sched->base_time)) {
txtime = minimum_time;
goto done;
}
len = qdisc_pkt_len(skb);
packet_transmit_time = length_to_duration(q, len);
do {
sched_changed = 0;
entry = find_entry_to_transmit(skb, sch, sched, admin,
minimum_time,
&interval_start, &interval_end,
false);
if (!entry) {
txtime = 0;
goto done;
}
txtime = entry->next_txtime;
txtime = max_t(ktime_t, txtime, minimum_time);
txtime = max_t(ktime_t, txtime, interval_start);
if (admin && admin != sched &&
ktime_after(txtime, admin->base_time)) {
sched = admin;
sched_changed = 1;
continue;
}
transmit_end_time = ktime_add(txtime, packet_transmit_time);
minimum_time = transmit_end_time;
/* Update the txtime of current entry to the next time it's
* interval starts.
*/
if (ktime_after(transmit_end_time, interval_end))
entry->next_txtime = ktime_add(interval_start, sched->cycle_time);
} while (sched_changed || ktime_after(transmit_end_time, interval_end));
entry->next_txtime = transmit_end_time;
done:
rcu_read_unlock();
return txtime;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
static int taprio_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
{
struct taprio_sched *q = qdisc_priv(sch);
struct Qdisc *child;
int queue;
queue = skb_get_queue_mapping(skb);
child = q->qdiscs[queue];
if (unlikely(!child))
return qdisc_drop(skb, sch, to_free);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
if (skb->sk && sock_flag(skb->sk, SOCK_TXTIME)) {
if (!is_valid_interval(skb, sch))
return qdisc_drop(skb, sch, to_free);
} else if (TXTIME_ASSIST_IS_ENABLED(q->flags)) {
skb->tstamp = get_packet_txtime(skb, sch);
if (!skb->tstamp)
return qdisc_drop(skb, sch, to_free);
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
qdisc_qstats_backlog_inc(sch, skb);
sch->q.qlen++;
return qdisc_enqueue(skb, child, to_free);
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
static struct sk_buff *taprio_peek_soft(struct Qdisc *sch)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
struct sched_entry *entry;
struct sk_buff *skb;
u32 gate_mask;
int i;
rcu_read_lock();
entry = rcu_dereference(q->current_entry);
net: sched: taprio: Fix taprio_peek() While traversing taprio's children qdisc list, if the gate is closed for a given traffic class, we should continue traversing the list since the remaining qdiscs may have skb ready for transmission. This patch also takes this opportunity and changes the function to use the TAPRIO_ALL_GATES_OPEN macro instead of the magic number '-1'. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:23 +07:00
gate_mask = entry ? entry->gate_mask : TAPRIO_ALL_GATES_OPEN;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
rcu_read_unlock();
if (!gate_mask)
return NULL;
for (i = 0; i < dev->num_tx_queues; i++) {
struct Qdisc *child = q->qdiscs[i];
int prio;
u8 tc;
if (unlikely(!child))
continue;
skb = child->ops->peek(child);
if (!skb)
continue;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
if (TXTIME_ASSIST_IS_ENABLED(q->flags))
return skb;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
prio = skb->priority;
tc = netdev_get_prio_tc_map(dev, prio);
if (!(gate_mask & BIT(tc)))
net: sched: taprio: Fix taprio_peek() While traversing taprio's children qdisc list, if the gate is closed for a given traffic class, we should continue traversing the list since the remaining qdiscs may have skb ready for transmission. This patch also takes this opportunity and changes the function to use the TAPRIO_ALL_GATES_OPEN macro instead of the magic number '-1'. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:23 +07:00
continue;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
return skb;
}
return NULL;
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
static struct sk_buff *taprio_peek_offload(struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
struct sk_buff *skb;
int i;
for (i = 0; i < dev->num_tx_queues; i++) {
struct Qdisc *child = q->qdiscs[i];
if (unlikely(!child))
continue;
skb = child->ops->peek(child);
if (!skb)
continue;
return skb;
}
return NULL;
}
static struct sk_buff *taprio_peek(struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
return q->peek(sch);
}
net/sched: taprio: fix build without 64bit div Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 03:51:57 +07:00
static void taprio_set_budget(struct taprio_sched *q, struct sched_entry *entry)
{
atomic_set(&entry->budget,
div64_u64((u64)entry->interval * 1000,
atomic64_read(&q->picos_per_byte)));
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
static struct sk_buff *taprio_dequeue_soft(struct Qdisc *sch)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:30 +07:00
struct sk_buff *skb = NULL;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
struct sched_entry *entry;
u32 gate_mask;
int i;
rcu_read_lock();
entry = rcu_dereference(q->current_entry);
/* if there's no entry, it means that the schedule didn't
* start yet, so force all gates to be open, this is in
* accordance to IEEE 802.1Qbv-2015 Section 8.6.9.4.5
* "AdminGateSates"
*/
gate_mask = entry ? entry->gate_mask : TAPRIO_ALL_GATES_OPEN;
if (!gate_mask)
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:30 +07:00
goto done;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
for (i = 0; i < dev->num_tx_queues; i++) {
struct Qdisc *child = q->qdiscs[i];
ktime_t guard;
int prio;
int len;
u8 tc;
if (unlikely(!child))
continue;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
if (TXTIME_ASSIST_IS_ENABLED(q->flags)) {
skb = child->ops->dequeue(child);
if (!skb)
continue;
goto skb_found;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
skb = child->ops->peek(child);
if (!skb)
continue;
prio = skb->priority;
tc = netdev_get_prio_tc_map(dev, prio);
if (!(gate_mask & BIT(tc)))
continue;
len = qdisc_pkt_len(skb);
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:18 +07:00
guard = ktime_add_ns(taprio_get_time(q),
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
length_to_duration(q, len));
/* In the case that there's no gate entry, there's no
* guard band ...
*/
if (gate_mask != TAPRIO_ALL_GATES_OPEN &&
ktime_after(guard, entry->close_time))
net: sched: taprio: Fix taprio_dequeue() In case we don't have 'guard' or 'budget' to transmit the skb, we should continue traversing the qdisc list since the remaining guard/budget might be enough to transmit a skb from other children qdiscs. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:24 +07:00
continue;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
/* ... and no budget. */
if (gate_mask != TAPRIO_ALL_GATES_OPEN &&
atomic_sub_return(len, &entry->budget) < 0)
net: sched: taprio: Fix taprio_dequeue() In case we don't have 'guard' or 'budget' to transmit the skb, we should continue traversing the qdisc list since the remaining guard/budget might be enough to transmit a skb from other children qdiscs. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:24 +07:00
continue;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
skb = child->ops->dequeue(child);
if (unlikely(!skb))
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:30 +07:00
goto done;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
skb_found:
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
qdisc_bstats_update(sch, skb);
qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:30 +07:00
goto done;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:30 +07:00
done:
rcu_read_unlock();
return skb;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
static struct sk_buff *taprio_dequeue_offload(struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
struct sk_buff *skb;
int i;
for (i = 0; i < dev->num_tx_queues; i++) {
struct Qdisc *child = q->qdiscs[i];
if (unlikely(!child))
continue;
skb = child->ops->dequeue(child);
if (unlikely(!skb))
continue;
qdisc_bstats_update(sch, skb);
qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
return skb;
}
return NULL;
}
static struct sk_buff *taprio_dequeue(struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
return q->dequeue(sch);
}
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
static bool should_restart_cycle(const struct sched_gate_list *oper,
const struct sched_entry *entry)
{
if (list_is_last(&entry->list, &oper->entries))
return true;
if (ktime_compare(entry->close_time, oper->cycle_close_time) == 0)
return true;
return false;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
static bool should_change_schedules(const struct sched_gate_list *admin,
const struct sched_gate_list *oper,
ktime_t close_time)
{
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:33 +07:00
ktime_t next_base_time, extension_time;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (!admin)
return false;
next_base_time = sched_base_time(admin);
/* This is the simple case, the close_time would fall after
* the next schedule base_time.
*/
if (ktime_compare(next_base_time, close_time) <= 0)
return true;
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:33 +07:00
/* This is the cycle_time_extension case, if the close_time
* plus the amount that can be extended would fall after the
* next schedule base_time, we can extend the current schedule
* for that amount.
*/
extension_time = ktime_add_ns(close_time, oper->cycle_time_extension);
/* FIXME: the IEEE 802.1Q-2018 Specification isn't clear about
* how precisely the extension should be made. So after
* conformance testing, this logic may change.
*/
if (ktime_compare(next_base_time, extension_time) <= 0)
return true;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
return false;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
static enum hrtimer_restart advance_sched(struct hrtimer *timer)
{
struct taprio_sched *q = container_of(timer, struct taprio_sched,
advance_timer);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
struct sched_gate_list *oper, *admin;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
struct sched_entry *entry, *next;
struct Qdisc *sch = q->root;
ktime_t close_time;
spin_lock(&q->current_entry_lock);
entry = rcu_dereference_protected(q->current_entry,
lockdep_is_held(&q->current_entry_lock));
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
oper = rcu_dereference_protected(q->oper_sched,
lockdep_is_held(&q->current_entry_lock));
admin = rcu_dereference_protected(q->admin_sched,
lockdep_is_held(&q->current_entry_lock));
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (!oper)
switch_schedules(q, &admin, &oper);
/* This can happen in two cases: 1. this is the very first run
* of this function (i.e. we weren't running any schedule
* previously); 2. The previous schedule just ended. The first
* entry of all schedules are pre-calculated during the
* schedule initialization.
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
*/
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (unlikely(!entry || entry->close_time == oper->base_time)) {
next = list_first_entry(&oper->entries, struct sched_entry,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
list);
close_time = next->close_time;
goto first_run;
}
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
if (should_restart_cycle(oper, entry)) {
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
next = list_first_entry(&oper->entries, struct sched_entry,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
list);
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
oper->cycle_close_time = ktime_add_ns(oper->cycle_close_time,
oper->cycle_time);
} else {
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
next = list_next_entry(entry, list);
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
close_time = ktime_add_ns(entry->close_time, next->interval);
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
close_time = min_t(ktime_t, close_time, oper->cycle_close_time);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (should_change_schedules(admin, oper, close_time)) {
/* Set things so the next time this runs, the new
* schedule runs.
*/
close_time = sched_base_time(admin);
switch_schedules(q, &admin, &oper);
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
next->close_time = close_time;
net/sched: taprio: fix build without 64bit div Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 03:51:57 +07:00
taprio_set_budget(q, next);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
first_run:
rcu_assign_pointer(q->current_entry, next);
spin_unlock(&q->current_entry_lock);
hrtimer_set_expires(&q->advance_timer, close_time);
rcu_read_lock();
__netif_schedule(sch);
rcu_read_unlock();
return HRTIMER_RESTART;
}
static const struct nla_policy entry_policy[TCA_TAPRIO_SCHED_ENTRY_MAX + 1] = {
[TCA_TAPRIO_SCHED_ENTRY_INDEX] = { .type = NLA_U32 },
[TCA_TAPRIO_SCHED_ENTRY_CMD] = { .type = NLA_U8 },
[TCA_TAPRIO_SCHED_ENTRY_GATE_MASK] = { .type = NLA_U32 },
[TCA_TAPRIO_SCHED_ENTRY_INTERVAL] = { .type = NLA_U32 },
};
static const struct nla_policy taprio_policy[TCA_TAPRIO_ATTR_MAX + 1] = {
[TCA_TAPRIO_ATTR_PRIOMAP] = {
.len = sizeof(struct tc_mqprio_qopt)
},
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:33 +07:00
[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST] = { .type = NLA_NESTED },
[TCA_TAPRIO_ATTR_SCHED_BASE_TIME] = { .type = NLA_S64 },
[TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY] = { .type = NLA_NESTED },
[TCA_TAPRIO_ATTR_SCHED_CLOCKID] = { .type = NLA_S32 },
[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME] = { .type = NLA_S64 },
[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION] = { .type = NLA_S64 },
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
};
static int fill_sched_entry(struct nlattr **tb, struct sched_entry *entry,
struct netlink_ext_ack *extack)
{
u32 interval = 0;
if (tb[TCA_TAPRIO_SCHED_ENTRY_CMD])
entry->command = nla_get_u8(
tb[TCA_TAPRIO_SCHED_ENTRY_CMD]);
if (tb[TCA_TAPRIO_SCHED_ENTRY_GATE_MASK])
entry->gate_mask = nla_get_u32(
tb[TCA_TAPRIO_SCHED_ENTRY_GATE_MASK]);
if (tb[TCA_TAPRIO_SCHED_ENTRY_INTERVAL])
interval = nla_get_u32(
tb[TCA_TAPRIO_SCHED_ENTRY_INTERVAL]);
if (interval == 0) {
NL_SET_ERR_MSG(extack, "Invalid interval for schedule entry");
return -EINVAL;
}
entry->interval = interval;
return 0;
}
static int parse_sched_entry(struct nlattr *n, struct sched_entry *entry,
int index, struct netlink_ext_ack *extack)
{
struct nlattr *tb[TCA_TAPRIO_SCHED_ENTRY_MAX + 1] = { };
int err;
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 19:07:28 +07:00
err = nla_parse_nested_deprecated(tb, TCA_TAPRIO_SCHED_ENTRY_MAX, n,
entry_policy, NULL);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (err < 0) {
NL_SET_ERR_MSG(extack, "Could not parse nested entry");
return -EINVAL;
}
entry->index = index;
return fill_sched_entry(tb, entry, extack);
}
static int parse_sched_list(struct nlattr *list,
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
struct sched_gate_list *sched,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
struct netlink_ext_ack *extack)
{
struct nlattr *n;
int err, rem;
int i = 0;
if (!list)
return -EINVAL;
nla_for_each_nested(n, list, rem) {
struct sched_entry *entry;
if (nla_type(n) != TCA_TAPRIO_SCHED_ENTRY) {
NL_SET_ERR_MSG(extack, "Attribute is not of type 'entry'");
continue;
}
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
if (!entry) {
NL_SET_ERR_MSG(extack, "Not enough memory for entry");
return -ENOMEM;
}
err = parse_sched_entry(n, entry, i, extack);
if (err < 0) {
kfree(entry);
return err;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
list_add_tail(&entry->list, &sched->entries);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
i++;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
sched->num_entries = i;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
return i;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
static int parse_taprio_schedule(struct nlattr **tb,
struct sched_gate_list *new,
struct netlink_ext_ack *extack)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
{
int err = 0;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (tb[TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY]) {
NL_SET_ERR_MSG(extack, "Adding a single entry is not supported");
return -ENOTSUPP;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (tb[TCA_TAPRIO_ATTR_SCHED_BASE_TIME])
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
new->base_time = nla_get_s64(tb[TCA_TAPRIO_ATTR_SCHED_BASE_TIME]);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:33 +07:00
if (tb[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION])
new->cycle_time_extension = nla_get_s64(tb[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION]);
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
if (tb[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME])
new->cycle_time = nla_get_s64(tb[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME]);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST])
err = parse_sched_list(
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST], new, extack);
if (err < 0)
return err;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: calculate cycle_time when schedule is installed cycle time for a particular schedule is calculated only when it is first installed. So, it makes sense to just calculate it once right after the 'cycle_time' parameter has been parsed and store it in cycle_time. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:15 +07:00
if (!new->cycle_time) {
struct sched_entry *entry;
ktime_t cycle = 0;
list_for_each_entry(entry, &new->entries, list)
cycle = ktime_add_ns(cycle, entry->interval);
new->cycle_time = cycle;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
return 0;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
static int taprio_parse_mqprio_opt(struct net_device *dev,
struct tc_mqprio_qopt *qopt,
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
struct netlink_ext_ack *extack,
u32 taprio_flags)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
{
int i, j;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (!qopt && !dev->num_tc) {
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
NL_SET_ERR_MSG(extack, "'mqprio' configuration is necessary");
return -EINVAL;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
/* If num_tc is already set, it means that the user already
* configured the mqprio part
*/
if (dev->num_tc)
return 0;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
/* Verify num_tc is not out of max range */
if (qopt->num_tc > TC_MAX_QUEUE) {
NL_SET_ERR_MSG(extack, "Number of traffic classes is outside valid range");
return -EINVAL;
}
/* taprio imposes that traffic classes map 1:n to tx queues */
if (qopt->num_tc > dev->num_tx_queues) {
NL_SET_ERR_MSG(extack, "Number of traffic classes is greater than number of HW queues");
return -EINVAL;
}
/* Verify priority mapping uses valid tcs */
taprio: don't reject same mqprio settings The taprio qdisc allows to set mqprio setting but only once. In case if mqprio settings are provided next time the error is returned as it's not allowed to change traffic class mapping in-flignt and that is normal. But if configuration is absolutely the same - no need to return error. It allows to provide same command couple times, changing only base time for instance, or changing only scheds maps, but leaving mqprio setting w/o modification. It more corresponds the message: "Changing the traffic mapping of a running schedule is not supported", so reject mqprio if it's really changed. Also corrected TC_BITMASK + 1 for consistency, as proposed. Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19 07:23:12 +07:00
for (i = 0; i <= TC_BITMASK; i++) {
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (qopt->prio_tc_map[i] >= qopt->num_tc) {
NL_SET_ERR_MSG(extack, "Invalid traffic class in priority to traffic class mapping");
return -EINVAL;
}
}
for (i = 0; i < qopt->num_tc; i++) {
unsigned int last = qopt->offset[i] + qopt->count[i];
/* Verify the queue count is in tx range being equal to the
* real_num_tx_queues indicates the last queue is in use.
*/
if (qopt->offset[i] >= dev->num_tx_queues ||
!qopt->count[i] ||
last > dev->real_num_tx_queues) {
NL_SET_ERR_MSG(extack, "Invalid queue in traffic class to queue mapping");
return -EINVAL;
}
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
if (TXTIME_ASSIST_IS_ENABLED(taprio_flags))
continue;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
/* Verify that the offset and counts do not overlap */
for (j = i + 1; j < qopt->num_tc; j++) {
if (last > qopt->offset[j]) {
NL_SET_ERR_MSG(extack, "Detected overlap in the traffic class to queue mapping");
return -EINVAL;
}
}
}
return 0;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
static int taprio_get_start_time(struct Qdisc *sch,
struct sched_gate_list *sched,
ktime_t *start)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
{
struct taprio_sched *q = qdisc_priv(sch);
ktime_t now, base, cycle;
s64 n;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
base = sched_base_time(sched);
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:18 +07:00
now = taprio_get_time(q);
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:21 +07:00
if (ktime_after(base, now)) {
*start = base;
return 0;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: calculate cycle_time when schedule is installed cycle time for a particular schedule is calculated only when it is first installed. So, it makes sense to just calculate it once right after the 'cycle_time' parameter has been parsed and store it in cycle_time. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:15 +07:00
cycle = sched->cycle_time;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:21 +07:00
/* The qdisc is expected to have at least one sched_entry. Moreover,
* any entry must have 'interval' > 0. Thus if the cycle time is zero,
* something went really wrong. In that case, we should warn about this
* inconsistent state and return error.
*/
if (WARN_ON(!cycle))
return -EFAULT;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
/* Schedule the start time for the beginning of the next
* cycle.
*/
n = div64_s64(ktime_sub_ns(now, base), cycle);
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:21 +07:00
*start = ktime_add_ns(base, (n + 1) * cycle);
return 0;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
static void setup_first_close_time(struct taprio_sched *q,
struct sched_gate_list *sched, ktime_t base)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
{
struct sched_entry *first;
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
ktime_t cycle;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
first = list_first_entry(&sched->entries,
struct sched_entry, list);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: calculate cycle_time when schedule is installed cycle time for a particular schedule is calculated only when it is first installed. So, it makes sense to just calculate it once right after the 'cycle_time' parameter has been parsed and store it in cycle_time. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:15 +07:00
cycle = sched->cycle_time;
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
/* FIXME: find a better place to do this */
sched->cycle_close_time = ktime_add_ns(base, cycle);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
first->close_time = ktime_add_ns(base, first->interval);
net/sched: taprio: fix build without 64bit div Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 03:51:57 +07:00
taprio_set_budget(q, first);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
rcu_assign_pointer(q->current_entry, NULL);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
static void taprio_start_sched(struct Qdisc *sch,
ktime_t start, struct sched_gate_list *new)
{
struct taprio_sched *q = qdisc_priv(sch);
ktime_t expires;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
if (FULL_OFFLOAD_IS_ENABLED(q->flags))
return;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
expires = hrtimer_get_expires(&q->advance_timer);
if (expires == 0)
expires = KTIME_MAX;
/* If the new schedule starts before the next expiration, we
* reprogram it to the earliest one, so we change the admin
* schedule to the operational one at the right time.
*/
start = min_t(ktime_t, start, expires);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
hrtimer_start(&q->advance_timer, start, HRTIMER_MODE_ABS);
}
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
static void taprio_set_picos_per_byte(struct net_device *dev,
struct taprio_sched *q)
{
struct ethtool_link_ksettings ecmd;
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 08:07:22 +07:00
int speed = SPEED_10;
int picos_per_byte;
int err;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 08:07:22 +07:00
err = __ethtool_get_link_ksettings(dev, &ecmd);
if (err < 0)
goto skip;
net: sched: taprio: Avoid division by zero on invalid link speed The check in taprio_set_picos_per_byte is currently not robust enough and will trigger this division by zero, due to e.g. PHYLINK not setting kset->base.speed when there is no PHY connected: [ 27.109992] Division by zero in kernel. [ 27.113842] CPU: 1 PID: 198 Comm: tc Not tainted 5.3.0-rc5-01246-gc4006b8c2637-dirty #212 [ 27.121974] Hardware name: Freescale LS1021A [ 27.126234] [<c03132e0>] (unwind_backtrace) from [<c030d8b8>] (show_stack+0x10/0x14) [ 27.133938] [<c030d8b8>] (show_stack) from [<c10b21b0>] (dump_stack+0xb0/0xc4) [ 27.141124] [<c10b21b0>] (dump_stack) from [<c10af97c>] (Ldiv0_64+0x8/0x18) [ 27.148052] [<c10af97c>] (Ldiv0_64) from [<c0700260>] (div64_u64+0xcc/0xf0) [ 27.154978] [<c0700260>] (div64_u64) from [<c07002d0>] (div64_s64+0x4c/0x68) [ 27.161993] [<c07002d0>] (div64_s64) from [<c0f3d890>] (taprio_set_picos_per_byte+0xe8/0xf4) [ 27.170388] [<c0f3d890>] (taprio_set_picos_per_byte) from [<c0f3f614>] (taprio_change+0x668/0xcec) [ 27.179302] [<c0f3f614>] (taprio_change) from [<c0f2bc24>] (qdisc_create+0x1fc/0x4f4) [ 27.187091] [<c0f2bc24>] (qdisc_create) from [<c0f2c0c8>] (tc_modify_qdisc+0x1ac/0x6f8) [ 27.195055] [<c0f2c0c8>] (tc_modify_qdisc) from [<c0ee9604>] (rtnetlink_rcv_msg+0x268/0x2dc) [ 27.203449] [<c0ee9604>] (rtnetlink_rcv_msg) from [<c0f4fef0>] (netlink_rcv_skb+0xe0/0x114) [ 27.211756] [<c0f4fef0>] (netlink_rcv_skb) from [<c0f4f6cc>] (netlink_unicast+0x1b4/0x22c) [ 27.219977] [<c0f4f6cc>] (netlink_unicast) from [<c0f4fa84>] (netlink_sendmsg+0x284/0x340) [ 27.228198] [<c0f4fa84>] (netlink_sendmsg) from [<c0eae5fc>] (sock_sendmsg+0x14/0x24) [ 27.235988] [<c0eae5fc>] (sock_sendmsg) from [<c0eaedf8>] (___sys_sendmsg+0x214/0x228) [ 27.243863] [<c0eaedf8>] (___sys_sendmsg) from [<c0eb015c>] (__sys_sendmsg+0x50/0x8c) [ 27.251652] [<c0eb015c>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 27.259524] Exception stack(0xe8045fa8 to 0xe8045ff0) [ 27.264546] 5fa0: b6f608c8 000000f8 00000003 bed7e2f0 00000000 00000000 [ 27.272681] 5fc0: b6f608c8 000000f8 004ce54c 00000128 5d3ce8c7 00000000 00000026 00505c9c [ 27.280812] 5fe0: 00000070 bed7e298 004ddd64 b6dd1e64 Russell King points out that the ethtool API says zero is a valid return value of __ethtool_get_link_ksettings: * If it is enabled then they are read-only; if the link * is up they represent the negotiated link mode; if the link is down, * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. So, it seems that taprio is not following the API... I'd suggest either fixing taprio, or getting agreement to change the ethtool API. The chosen path was to fix taprio. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-29 06:37:22 +07:00
if (ecmd.base.speed && ecmd.base.speed != SPEED_UNKNOWN)
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 08:07:22 +07:00
speed = ecmd.base.speed;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 08:07:22 +07:00
skip:
net: sched: taprio: Fix potential integer overflow in taprio_set_picos_per_byte The speed divisor is used in a context expecting an s64, but it is evaluated using 32-bit arithmetic. To avoid that happening, instead of multiplying by 1,000,000 in the first place, simplify the fraction and do a standard 32 bit division instead. Fixes: f04b514c0ce2 ("taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte") Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-29 06:01:39 +07:00
picos_per_byte = (USEC_PER_SEC * 8) / speed;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
atomic64_set(&q->picos_per_byte, picos_per_byte);
netdev_dbg(dev, "taprio: set %s's picos_per_byte to: %lld, linkspeed: %d\n",
dev->name, (long long)atomic64_read(&q->picos_per_byte),
ecmd.base.speed);
}
static int taprio_dev_notifier(struct notifier_block *nb, unsigned long event,
void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct net_device *qdev;
struct taprio_sched *q;
bool found = false;
ASSERT_RTNL();
if (event != NETDEV_UP && event != NETDEV_CHANGE)
return NOTIFY_DONE;
spin_lock(&taprio_list_lock);
list_for_each_entry(q, &taprio_list, taprio_list) {
qdev = qdisc_dev(q->root);
if (qdev == dev) {
found = true;
break;
}
}
spin_unlock(&taprio_list_lock);
if (found)
taprio_set_picos_per_byte(dev, q);
return NOTIFY_DONE;
}
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
static void setup_txtime(struct taprio_sched *q,
struct sched_gate_list *sched, ktime_t base)
{
struct sched_entry *entry;
u32 interval = 0;
list_for_each_entry(entry, &sched->entries, list) {
entry->next_txtime = ktime_add_ns(base, interval);
interval += entry->interval;
}
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
static struct tc_taprio_qopt_offload *taprio_offload_alloc(int num_entries)
{
size_t size = sizeof(struct tc_taprio_sched_entry) * num_entries +
sizeof(struct __tc_taprio_qopt_offload);
struct __tc_taprio_qopt_offload *__offload;
__offload = kzalloc(size, GFP_KERNEL);
if (!__offload)
return NULL;
refcount_set(&__offload->users, 1);
return &__offload->offload;
}
struct tc_taprio_qopt_offload *taprio_offload_get(struct tc_taprio_qopt_offload
*offload)
{
struct __tc_taprio_qopt_offload *__offload;
__offload = container_of(offload, struct __tc_taprio_qopt_offload,
offload);
refcount_inc(&__offload->users);
return offload;
}
EXPORT_SYMBOL_GPL(taprio_offload_get);
void taprio_offload_free(struct tc_taprio_qopt_offload *offload)
{
struct __tc_taprio_qopt_offload *__offload;
__offload = container_of(offload, struct __tc_taprio_qopt_offload,
offload);
if (!refcount_dec_and_test(&__offload->users))
return;
kfree(__offload);
}
EXPORT_SYMBOL_GPL(taprio_offload_free);
/* The function will only serve to keep the pointers to the "oper" and "admin"
* schedules valid in relation to their base times, so when calling dump() the
* users looks at the right schedules.
* When using full offload, the admin configuration is promoted to oper at the
* base_time in the PHC time domain. But because the system time is not
* necessarily in sync with that, we can't just trigger a hrtimer to call
* switch_schedules at the right hardware time.
* At the moment we call this by hand right away from taprio, but in the future
* it will be useful to create a mechanism for drivers to notify taprio of the
* offload state (PENDING, ACTIVE, INACTIVE) so it can be visible in dump().
* This is left as TODO.
*/
net: sched: taprio: fix -Wmissing-prototypes warnings We get one warnings when build kernel W=1: net/sched/sch_taprio.c:1155:6: warning: no previous prototype for ‘taprio_offload_config_changed’ [-Wmissing-prototypes] Make the function static to fix this. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22 06:57:42 +07:00
static void taprio_offload_config_changed(struct taprio_sched *q)
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
{
struct sched_gate_list *oper, *admin;
spin_lock(&q->current_entry_lock);
oper = rcu_dereference_protected(q->oper_sched,
lockdep_is_held(&q->current_entry_lock));
admin = rcu_dereference_protected(q->admin_sched,
lockdep_is_held(&q->current_entry_lock));
switch_schedules(q, &admin, &oper);
spin_unlock(&q->current_entry_lock);
}
static void taprio_sched_to_offload(struct taprio_sched *q,
struct sched_gate_list *sched,
const struct tc_mqprio_qopt *mqprio,
struct tc_taprio_qopt_offload *offload)
{
struct sched_entry *entry;
int i = 0;
offload->base_time = sched->base_time;
offload->cycle_time = sched->cycle_time;
offload->cycle_time_extension = sched->cycle_time_extension;
list_for_each_entry(entry, &sched->entries, list) {
struct tc_taprio_sched_entry *e = &offload->entries[i];
e->command = entry->command;
e->interval = entry->interval;
e->gate_mask = entry->gate_mask;
i++;
}
offload->num_entries = i;
}
static int taprio_enable_offload(struct net_device *dev,
struct tc_mqprio_qopt *mqprio,
struct taprio_sched *q,
struct sched_gate_list *sched,
struct netlink_ext_ack *extack)
{
const struct net_device_ops *ops = dev->netdev_ops;
struct tc_taprio_qopt_offload *offload;
int err = 0;
if (!ops->ndo_setup_tc) {
NL_SET_ERR_MSG(extack,
"Device does not support taprio offload");
return -EOPNOTSUPP;
}
offload = taprio_offload_alloc(sched->num_entries);
if (!offload) {
NL_SET_ERR_MSG(extack,
"Not enough memory for enabling offload mode");
return -ENOMEM;
}
offload->enable = 1;
taprio_sched_to_offload(q, sched, mqprio, offload);
err = ops->ndo_setup_tc(dev, TC_SETUP_QDISC_TAPRIO, offload);
if (err < 0) {
NL_SET_ERR_MSG(extack,
"Device failed to setup taprio offload");
goto done;
}
done:
taprio_offload_free(offload);
return err;
}
static int taprio_disable_offload(struct net_device *dev,
struct taprio_sched *q,
struct netlink_ext_ack *extack)
{
const struct net_device_ops *ops = dev->netdev_ops;
struct tc_taprio_qopt_offload *offload;
int err;
if (!FULL_OFFLOAD_IS_ENABLED(q->flags))
return 0;
if (!ops->ndo_setup_tc)
return -EOPNOTSUPP;
offload = taprio_offload_alloc(0);
if (!offload) {
NL_SET_ERR_MSG(extack,
"Not enough memory to disable offload mode");
return -ENOMEM;
}
offload->enable = 0;
err = ops->ndo_setup_tc(dev, TC_SETUP_QDISC_TAPRIO, offload);
if (err < 0) {
NL_SET_ERR_MSG(extack,
"Device failed to disable offload");
goto out;
}
out:
taprio_offload_free(offload);
return err;
}
/* If full offload is enabled, the only possible clockid is the net device's
* PHC. For that reason, specifying a clockid through netlink is incorrect.
* For txtime-assist, it is implicitly assumed that the device's PHC is kept
* in sync with the specified clockid via a user space daemon such as phc2sys.
* For both software taprio and txtime-assist, the clockid is used for the
* hrtimer that advances the schedule and hence mandatory.
*/
static int taprio_parse_clockid(struct Qdisc *sch, struct nlattr **tb,
struct netlink_ext_ack *extack)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
int err = -EINVAL;
if (FULL_OFFLOAD_IS_ENABLED(q->flags)) {
const struct ethtool_ops *ops = dev->ethtool_ops;
struct ethtool_ts_info info = {
.cmd = ETHTOOL_GET_TS_INFO,
.phc_index = -1,
};
if (tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]) {
NL_SET_ERR_MSG(extack,
"The 'clockid' cannot be specified for full offload");
goto out;
}
if (ops && ops->get_ts_info)
err = ops->get_ts_info(dev, &info);
if (err || info.phc_index < 0) {
NL_SET_ERR_MSG(extack,
"Device does not have a PTP clock");
err = -ENOTSUPP;
goto out;
}
} else if (tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]) {
int clockid = nla_get_s32(tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]);
/* We only support static clockids and we don't allow
* for it to be modified after the first init.
*/
if (clockid < 0 ||
(q->clockid != -1 && q->clockid != clockid)) {
NL_SET_ERR_MSG(extack,
"Changing the 'clockid' of a running schedule is not supported");
err = -ENOTSUPP;
goto out;
}
switch (clockid) {
case CLOCK_REALTIME:
q->tk_offset = TK_OFFS_REAL;
break;
case CLOCK_MONOTONIC:
q->tk_offset = TK_OFFS_MAX;
break;
case CLOCK_BOOTTIME:
q->tk_offset = TK_OFFS_BOOT;
break;
case CLOCK_TAI:
q->tk_offset = TK_OFFS_TAI;
break;
default:
NL_SET_ERR_MSG(extack, "Invalid 'clockid'");
err = -EINVAL;
goto out;
}
q->clockid = clockid;
} else {
NL_SET_ERR_MSG(extack, "Specifying a 'clockid' is mandatory");
goto out;
}
net: taprio: Fix returning EINVAL when configuring without flags When configuring a taprio instance if "flags" is not specified (or it's zero), taprio currently replies with an "Invalid argument" error. So, set the return value to zero after we are done with all the checks. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09 06:20:07 +07:00
/* Everything went ok, return success. */
err = 0;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
out:
return err;
}
taprio: don't reject same mqprio settings The taprio qdisc allows to set mqprio setting but only once. In case if mqprio settings are provided next time the error is returned as it's not allowed to change traffic class mapping in-flignt and that is normal. But if configuration is absolutely the same - no need to return error. It allows to provide same command couple times, changing only base time for instance, or changing only scheds maps, but leaving mqprio setting w/o modification. It more corresponds the message: "Changing the traffic mapping of a running schedule is not supported", so reject mqprio if it's really changed. Also corrected TC_BITMASK + 1 for consistency, as proposed. Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19 07:23:12 +07:00
static int taprio_mqprio_cmp(const struct net_device *dev,
const struct tc_mqprio_qopt *mqprio)
{
int i;
if (!mqprio || mqprio->num_tc != dev->num_tc)
return -1;
for (i = 0; i < mqprio->num_tc; i++)
if (dev->tc_to_txq[i].count != mqprio->count[i] ||
dev->tc_to_txq[i].offset != mqprio->offset[i])
return -1;
for (i = 0; i <= TC_BITMASK; i++)
if (dev->prio_tc_map[i] != mqprio->prio_tc_map[i])
return -1;
return 0;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
struct netlink_ext_ack *extack)
{
struct nlattr *tb[TCA_TAPRIO_ATTR_MAX + 1] = { };
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
struct sched_gate_list *oper, *admin, *new_admin;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
struct tc_mqprio_qopt *mqprio = NULL;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
u32 taprio_flags = 0;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
unsigned long flags;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
ktime_t start;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
int i, err;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 19:07:28 +07:00
err = nla_parse_nested_deprecated(tb, TCA_TAPRIO_ATTR_MAX, opt,
taprio_policy, extack);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (err < 0)
return err;
if (tb[TCA_TAPRIO_ATTR_PRIOMAP])
mqprio = nla_data(tb[TCA_TAPRIO_ATTR_PRIOMAP]);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
if (tb[TCA_TAPRIO_ATTR_FLAGS]) {
taprio_flags = nla_get_u32(tb[TCA_TAPRIO_ATTR_FLAGS]);
if (q->flags != 0 && q->flags != taprio_flags) {
NL_SET_ERR_MSG_MOD(extack, "Changing 'flags' of a running schedule is not supported");
return -EOPNOTSUPP;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
} else if (!taprio_flags_valid(taprio_flags)) {
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
NL_SET_ERR_MSG_MOD(extack, "Specified 'flags' are not valid");
return -EINVAL;
}
q->flags = taprio_flags;
}
err = taprio_parse_mqprio_opt(dev, mqprio, extack, taprio_flags);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (err < 0)
return err;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
new_admin = kzalloc(sizeof(*new_admin), GFP_KERNEL);
if (!new_admin) {
NL_SET_ERR_MSG(extack, "Not enough memory for a new schedule");
return -ENOMEM;
}
INIT_LIST_HEAD(&new_admin->entries);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
rcu_read_lock();
oper = rcu_dereference(q->oper_sched);
admin = rcu_dereference(q->admin_sched);
rcu_read_unlock();
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: don't reject same mqprio settings The taprio qdisc allows to set mqprio setting but only once. In case if mqprio settings are provided next time the error is returned as it's not allowed to change traffic class mapping in-flignt and that is normal. But if configuration is absolutely the same - no need to return error. It allows to provide same command couple times, changing only base time for instance, or changing only scheds maps, but leaving mqprio setting w/o modification. It more corresponds the message: "Changing the traffic mapping of a running schedule is not supported", so reject mqprio if it's really changed. Also corrected TC_BITMASK + 1 for consistency, as proposed. Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19 07:23:12 +07:00
/* no changes - no new mqprio settings */
if (!taprio_mqprio_cmp(dev, mqprio))
mqprio = NULL;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (mqprio && (oper || admin)) {
NL_SET_ERR_MSG(extack, "Changing the traffic mapping of a running schedule is not supported");
err = -ENOTSUPP;
goto free_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
err = parse_taprio_schedule(tb, new_admin, extack);
if (err < 0)
goto free_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (new_admin->num_entries == 0) {
NL_SET_ERR_MSG(extack, "There should be at least one entry in the schedule");
err = -EINVAL;
goto free_sched;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
err = taprio_parse_clockid(sch, tb, extack);
if (err < 0)
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
goto free_sched;
taprio_set_picos_per_byte(dev, q);
taprio: Fix enabling offload with wrong number of traffic classes If the driver implementing taprio offloading depends on the value of the network device number of traffic classes (dev->num_tc) for whatever reason, it was going to receive the value zero. The value was only set after the offloading function is called. So, moving setting the number of traffic classes to before the offloading function is called fixes this issue. This is safe because this only happens when taprio is instantiated (we don't allow this configuration to be changed without first removing taprio). Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Reported-by: Po Liu <po.liu@nxp.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 04:46:06 +07:00
if (mqprio) {
netdev_set_num_tc(dev, mqprio->num_tc);
for (i = 0; i < mqprio->num_tc; i++)
netdev_set_tc_queue(dev, i,
mqprio->count[i],
mqprio->offset[i]);
/* Always use supplied priority mappings */
for (i = 0; i <= TC_BITMASK; i++)
netdev_set_prio_tc_map(dev, i,
mqprio->prio_tc_map[i]);
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
if (FULL_OFFLOAD_IS_ENABLED(taprio_flags))
err = taprio_enable_offload(dev, mqprio, q, new_admin, extack);
else
err = taprio_disable_offload(dev, q, extack);
if (err)
goto free_sched;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
/* Protects against enqueue()/dequeue() */
spin_lock_bh(qdisc_lock(sch));
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
if (tb[TCA_TAPRIO_ATTR_TXTIME_DELAY]) {
if (!TXTIME_ASSIST_IS_ENABLED(q->flags)) {
NL_SET_ERR_MSG_MOD(extack, "txtime-delay can only be set when txtime-assist mode is enabled");
err = -EINVAL;
goto unlock;
}
fix: taprio: Change type of txtime-delay parameter to u32 During the review of the iproute2 patches for txtime-assist mode, it was pointed out that it does not make sense for the txtime-delay parameter to be negative. So, change the type of the parameter from s32 to u32. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17 02:52:18 +07:00
q->txtime_delay = nla_get_u32(tb[TCA_TAPRIO_ATTR_TXTIME_DELAY]);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
}
if (!TXTIME_ASSIST_IS_ENABLED(taprio_flags) &&
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
!FULL_OFFLOAD_IS_ENABLED(taprio_flags) &&
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
!hrtimer_active(&q->advance_timer)) {
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
hrtimer_init(&q->advance_timer, q->clockid, HRTIMER_MODE_ABS);
q->advance_timer.function = advance_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
if (FULL_OFFLOAD_IS_ENABLED(taprio_flags)) {
q->dequeue = taprio_dequeue_offload;
q->peek = taprio_peek_offload;
} else {
/* Be sure to always keep the function pointers
* in a consistent state.
*/
q->dequeue = taprio_dequeue_soft;
q->peek = taprio_peek_soft;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
}
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:21 +07:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
err = taprio_get_start_time(sch, new_admin, &start);
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:21 +07:00
if (err < 0) {
NL_SET_ERR_MSG(extack, "Internal error: failed get start time");
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
goto unlock;
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 02:44:21 +07:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
if (TXTIME_ASSIST_IS_ENABLED(taprio_flags)) {
setup_txtime(q, new_admin, start);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
if (!oper) {
rcu_assign_pointer(q->oper_sched, new_admin);
err = 0;
new_admin = NULL;
goto unlock;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
rcu_assign_pointer(q->admin_sched, new_admin);
if (admin)
call_rcu(&admin->rcu, taprio_free_sched_cb);
} else {
setup_first_close_time(q, new_admin, start);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
/* Protects against advance_sched() */
spin_lock_irqsave(&q->current_entry_lock, flags);
taprio_start_sched(sch, start, new_admin);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
rcu_assign_pointer(q->admin_sched, new_admin);
if (admin)
call_rcu(&admin->rcu, taprio_free_sched_cb);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
spin_unlock_irqrestore(&q->current_entry_lock, flags);
taprio: fix panic while hw offload sched list swap Don't swap oper and admin schedules too early, it's not correct and causes crash. Steps to reproduce: 1) tc qdisc replace dev eth0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 1@2 \ base-time $SOME_BASE_TIME \ sched-entry S 01 80000 \ sched-entry S 02 15000 \ sched-entry S 04 40000 \ flags 2 2) tc qdisc replace dev eth0 parent root handle 100 taprio \ base-time $SOME_BASE_TIME \ sched-entry S 01 90000 \ sched-entry S 02 20000 \ sched-entry S 04 40000 \ flags 2 3) tc qdisc replace dev eth0 parent root handle 100 taprio \ base-time $SOME_BASE_TIME \ sched-entry S 01 150000 \ sched-entry S 02 200000 \ sched-entry S 04 40000 \ flags 2 Do 2 3 2 .. steps more times if not happens and observe: [ 305.832319] Unable to handle kernel write to read-only memory at virtual address ffff0000087ce7f0 [ 305.910887] CPU: 0 PID: 0 Comm: swapper/0 Not tainted [ 305.919306] Hardware name: Texas Instruments AM654 Base Board (DT) [...] [ 306.017119] x1 : ffff800848031d88 x0 : ffff800848031d80 [ 306.022422] Call trace: [ 306.024866] taprio_free_sched_cb+0x4c/0x98 [ 306.029040] rcu_process_callbacks+0x25c/0x410 [ 306.033476] __do_softirq+0x10c/0x208 [ 306.037132] irq_exit+0xb8/0xc8 [ 306.040267] __handle_domain_irq+0x64/0xb8 [ 306.044352] gic_handle_irq+0x7c/0x178 [ 306.048092] el1_irq+0xb0/0x128 [ 306.051227] arch_cpu_idle+0x10/0x18 [ 306.054795] do_idle+0x120/0x138 [ 306.058015] cpu_startup_entry+0x20/0x28 [ 306.061931] rest_init+0xcc/0xd8 [ 306.065154] start_kernel+0x3bc/0x3e4 [ 306.068810] Code: f2fbd5b7 f2fbd5b6 d503201f f9400422 (f9000662) [ 306.074900] ---[ end trace 96c8e2284a9d9d6e ]--- [ 306.079507] Kernel panic - not syncing: Fatal exception in interrupt [ 306.085847] SMP: stopping secondary CPUs [ 306.089765] Kernel Offset: disabled Try to explain one of the possible crash cases: The "real" admin list is assigned when admin_sched is set to new_admin, it happens after "swap", that assigns to oper_sched NULL. Thus if call qdisc show it can crash. Farther, next second time, when sched list is updated, the admin_sched is not NULL and becomes the oper_sched, previous oper_sched was NULL so just skipped. But then admin_sched is assigned new_admin, but schedules to free previous assigned admin_sched (that already became oper_sched). Farther, next third time, when sched list is updated, while one more swap, oper_sched is not null, but it was happy to be freed already (while prev. admin update), so while try to free oper_sched the kernel panic happens at taprio_free_sched_cb(). So, move the "swap emulation" where it should be according to function comment from code. Fixes: 9c66d15646760e ("taprio: Add support for hardware offloading") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02 06:28:28 +07:00
if (FULL_OFFLOAD_IS_ENABLED(taprio_flags))
taprio_offload_config_changed(q);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
}
new_admin = NULL;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
err = 0;
unlock:
spin_unlock_bh(qdisc_lock(sch));
free_sched:
net: sched: sch_taprio: fix memleak in error path for sched list parse In error case, all entries should be freed from the sched list before deleting it. For simplicity use rcu way. Fixes: 5a781ccbd19e46 ("tc: Add support for configuring the taprio scheduler") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-07 05:45:40 +07:00
if (new_admin)
call_rcu(&new_admin->rcu, taprio_free_sched_cb);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
return err;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
static void taprio_destroy(struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
unsigned int i;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
spin_lock(&taprio_list_lock);
list_del(&q->taprio_list);
spin_unlock(&taprio_list_lock);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
hrtimer_cancel(&q->advance_timer);
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
taprio_disable_offload(dev, q, NULL);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (q->qdiscs) {
for (i = 0; i < dev->num_tx_queues && q->qdiscs[i]; i++)
qdisc_put(q->qdiscs[i]);
kfree(q->qdiscs);
}
q->qdiscs = NULL;
netdev_set_num_tc(dev, 0);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (q->oper_sched)
call_rcu(&q->oper_sched->rcu, taprio_free_sched_cb);
if (q->admin_sched)
call_rcu(&q->admin_sched->rcu, taprio_free_sched_cb);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
static int taprio_init(struct Qdisc *sch, struct nlattr *opt,
struct netlink_ext_ack *extack)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
int i;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
spin_lock_init(&q->current_entry_lock);
hrtimer_init(&q->advance_timer, CLOCK_TAI, HRTIMER_MODE_ABS);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
q->advance_timer.function = advance_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
q->dequeue = taprio_dequeue_soft;
q->peek = taprio_peek_soft;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
q->root = sch;
/* We only support static clockids. Use an invalid value as default
* and get the valid one on taprio_change().
*/
q->clockid = -1;
taprio: Fix kernel panic in taprio_destroy taprio_init may fail earlier than this line: list_add(&q->taprio_list, &taprio_list); i.e. due to the net device not being multi queue. Attempting to remove q from the global taprio_list when it is not part of it will result in a kernel panic. Fix it by matching list_add and list_del better to one another in the order of operations. This way we can keep the deletion unconditional and with lower complexity - O(1). Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 08:07:21 +07:00
spin_lock(&taprio_list_lock);
list_add(&q->taprio_list, &taprio_list);
spin_unlock(&taprio_list_lock);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (sch->parent != TC_H_ROOT)
return -EOPNOTSUPP;
if (!netif_is_multiqueue(dev))
return -EOPNOTSUPP;
/* pre-allocate qdisc, attachment can't fail */
q->qdiscs = kcalloc(dev->num_tx_queues,
sizeof(q->qdiscs[0]),
GFP_KERNEL);
if (!q->qdiscs)
return -ENOMEM;
if (!opt)
return -EINVAL;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
for (i = 0; i < dev->num_tx_queues; i++) {
struct netdev_queue *dev_queue;
struct Qdisc *qdisc;
dev_queue = netdev_get_tx_queue(dev, i);
qdisc = qdisc_create_dflt(dev_queue,
&pfifo_qdisc_ops,
TC_H_MAKE(TC_H_MAJ(sch->handle),
TC_H_MIN(i + 1)),
extack);
if (!qdisc)
return -ENOMEM;
if (i < dev->real_num_tx_queues)
qdisc_hash_add(qdisc, false);
q->qdiscs[i] = qdisc;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
return taprio_change(sch, opt, extack);
}
static struct netdev_queue *taprio_queue_get(struct Qdisc *sch,
unsigned long cl)
{
struct net_device *dev = qdisc_dev(sch);
unsigned long ntx = cl - 1;
if (ntx >= dev->num_tx_queues)
return NULL;
return netdev_get_tx_queue(dev, ntx);
}
static int taprio_graft(struct Qdisc *sch, unsigned long cl,
struct Qdisc *new, struct Qdisc **old,
struct netlink_ext_ack *extack)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
if (!dev_queue)
return -EINVAL;
if (dev->flags & IFF_UP)
dev_deactivate(dev);
*old = q->qdiscs[cl - 1];
q->qdiscs[cl - 1] = new;
if (new)
new->flags |= TCQ_F_ONETXQUEUE | TCQ_F_NOPARENT;
if (dev->flags & IFF_UP)
dev_activate(dev);
return 0;
}
static int dump_entry(struct sk_buff *msg,
const struct sched_entry *entry)
{
struct nlattr *item;
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 16:13:06 +07:00
item = nla_nest_start_noflag(msg, TCA_TAPRIO_SCHED_ENTRY);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (!item)
return -ENOSPC;
if (nla_put_u32(msg, TCA_TAPRIO_SCHED_ENTRY_INDEX, entry->index))
goto nla_put_failure;
if (nla_put_u8(msg, TCA_TAPRIO_SCHED_ENTRY_CMD, entry->command))
goto nla_put_failure;
if (nla_put_u32(msg, TCA_TAPRIO_SCHED_ENTRY_GATE_MASK,
entry->gate_mask))
goto nla_put_failure;
if (nla_put_u32(msg, TCA_TAPRIO_SCHED_ENTRY_INTERVAL,
entry->interval))
goto nla_put_failure;
return nla_nest_end(msg, item);
nla_put_failure:
nla_nest_cancel(msg, item);
return -1;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
static int dump_schedule(struct sk_buff *msg,
const struct sched_gate_list *root)
{
struct nlattr *entry_list;
struct sched_entry *entry;
if (nla_put_s64(msg, TCA_TAPRIO_ATTR_SCHED_BASE_TIME,
root->base_time, TCA_TAPRIO_PAD))
return -1;
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:32 +07:00
if (nla_put_s64(msg, TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME,
root->cycle_time, TCA_TAPRIO_PAD))
return -1;
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:33 +07:00
if (nla_put_s64(msg, TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION,
root->cycle_time_extension, TCA_TAPRIO_PAD))
return -1;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
entry_list = nla_nest_start_noflag(msg,
TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST);
if (!entry_list)
goto error_nest;
list_for_each_entry(entry, &root->entries, list) {
if (dump_entry(msg, entry) < 0)
goto error_nest;
}
nla_nest_end(msg, entry_list);
return 0;
error_nest:
nla_nest_cancel(msg, entry_list);
return -1;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
static int taprio_dump(struct Qdisc *sch, struct sk_buff *skb)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
struct sched_gate_list *oper, *admin;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
struct tc_mqprio_qopt opt = { 0 };
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
struct nlattr *nest, *sched_nest;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
unsigned int i;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
rcu_read_lock();
oper = rcu_dereference(q->oper_sched);
admin = rcu_dereference(q->admin_sched);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
opt.num_tc = netdev_get_num_tc(dev);
memcpy(opt.prio_tc_map, dev->prio_tc_map, sizeof(opt.prio_tc_map));
for (i = 0; i < netdev_get_num_tc(dev); i++) {
opt.count[i] = dev->tc_to_txq[i].count;
opt.offset[i] = dev->tc_to_txq[i].offset;
}
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 16:13:06 +07:00
nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (!nest)
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
goto start_error;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
if (nla_put(skb, TCA_TAPRIO_ATTR_PRIOMAP, sizeof(opt), &opt))
goto options_error;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 08:59:58 +07:00
if (!FULL_OFFLOAD_IS_ENABLED(q->flags) &&
nla_put_s32(skb, TCA_TAPRIO_ATTR_SCHED_CLOCKID, q->clockid))
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
goto options_error;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
if (q->flags && nla_put_u32(skb, TCA_TAPRIO_ATTR_FLAGS, q->flags))
goto options_error;
if (q->txtime_delay &&
fix: taprio: Change type of txtime-delay parameter to u32 During the review of the iproute2 patches for txtime-assist mode, it was pointed out that it does not make sense for the txtime-delay parameter to be negative. So, change the type of the parameter from s32 to u32. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17 02:52:18 +07:00
nla_put_u32(skb, TCA_TAPRIO_ATTR_TXTIME_DELAY, q->txtime_delay))
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:07:17 +07:00
goto options_error;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (oper && dump_schedule(skb, oper))
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
goto options_error;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (!admin)
goto done;
sched_nest = nla_nest_start_noflag(skb, TCA_TAPRIO_ATTR_ADMIN_SCHED);
taprio: add null check on sched_nest to avoid potential null pointer dereference The call to nla_nest_start_noflag can return a null pointer and currently this is not being checked and this can lead to a null pointer dereference when the null pointer sched_nest is passed to function nla_nest_end. Fix this by adding in a null pointer check. Addresses-Coverity: ("Dereference null return value") Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06 04:50:19 +07:00
if (!sched_nest)
goto options_error;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
if (dump_schedule(skb, admin))
goto admin_error;
nla_nest_end(skb, sched_nest);
done:
rcu_read_unlock();
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
return nla_nest_end(skb, nest);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
admin_error:
nla_nest_cancel(skb, sched_nest);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
options_error:
nla_nest_cancel(skb, nest);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
start_error:
rcu_read_unlock();
return -ENOSPC;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
static struct Qdisc *taprio_leaf(struct Qdisc *sch, unsigned long cl)
{
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
if (!dev_queue)
return NULL;
return dev_queue->qdisc_sleeping;
}
static unsigned long taprio_find(struct Qdisc *sch, u32 classid)
{
unsigned int ntx = TC_H_MIN(classid);
if (!taprio_queue_get(sch, ntx))
return 0;
return ntx;
}
static int taprio_dump_class(struct Qdisc *sch, unsigned long cl,
struct sk_buff *skb, struct tcmsg *tcm)
{
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
tcm->tcm_parent = TC_H_ROOT;
tcm->tcm_handle |= TC_H_MIN(cl);
tcm->tcm_info = dev_queue->qdisc_sleeping->handle;
return 0;
}
static int taprio_dump_class_stats(struct Qdisc *sch, unsigned long cl,
struct gnet_dump *d)
__releases(d->lock)
__acquires(d->lock)
{
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
sch = dev_queue->qdisc_sleeping;
if (gnet_stats_copy_basic(&sch->running, d, NULL, &sch->bstats) < 0 ||
net: sched: introduce and use qstats read helpers Classful qdiscs can't access directly the child qdiscs backlog length: if such qdisc is NOLOCK, per CPU values should be accounted instead. Most qdiscs no not respect the above. As a result, qstats fetching for most classful qdisc is currently incorrect: if the child qdisc is NOLOCK, it always reports 0 len backlog. This change introduces a pair of helpers to safely fetch both backlog and qlen and use them in stats class dumping functions, fixing the above issue and cleaning a bit the code. DRR needs also to access the child qdisc queue length, so it needs custom handling. Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28 22:53:12 +07:00
qdisc_qstats_copy(d, sch) < 0)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
return -1;
return 0;
}
static void taprio_walk(struct Qdisc *sch, struct qdisc_walker *arg)
{
struct net_device *dev = qdisc_dev(sch);
unsigned long ntx;
if (arg->stop)
return;
arg->count = arg->skip;
for (ntx = arg->skip; ntx < dev->num_tx_queues; ntx++) {
if (arg->fn(sch, ntx + 1, arg) < 0) {
arg->stop = 1;
break;
}
arg->count++;
}
}
static struct netdev_queue *taprio_select_queue(struct Qdisc *sch,
struct tcmsg *tcm)
{
return taprio_queue_get(sch, TC_H_MIN(tcm->tcm_parent));
}
static const struct Qdisc_class_ops taprio_class_ops = {
.graft = taprio_graft,
.leaf = taprio_leaf,
.find = taprio_find,
.walk = taprio_walk,
.dump = taprio_dump_class,
.dump_stats = taprio_dump_class_stats,
.select_queue = taprio_select_queue,
};
static struct Qdisc_ops taprio_qdisc_ops __read_mostly = {
.cl_ops = &taprio_class_ops,
.id = "taprio",
.priv_size = sizeof(struct taprio_sched),
.init = taprio_init,
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 05:48:31 +07:00
.change = taprio_change,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
.destroy = taprio_destroy,
.peek = taprio_peek,
.dequeue = taprio_dequeue,
.enqueue = taprio_enqueue,
.dump = taprio_dump,
.owner = THIS_MODULE,
};
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
static struct notifier_block taprio_device_notifier = {
.notifier_call = taprio_dev_notifier,
};
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
static int __init taprio_module_init(void)
{
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
int err = register_netdevice_notifier(&taprio_device_notifier);
if (err)
return err;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
return register_qdisc(&taprio_qdisc_ops);
}
static void __exit taprio_module_exit(void)
{
unregister_qdisc(&taprio_qdisc_ops);
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 00:12:17 +07:00
unregister_netdevice_notifier(&taprio_device_notifier);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 07:59:43 +07:00
}
module_init(taprio_module_init);
module_exit(taprio_module_exit);
MODULE_LICENSE("GPL");
Reference in New Issue Copy Permalink