linux_dsm_epyc7002/net/bluetooth/hci_request.c

3080 lines
78 KiB
C
Raw Normal View History

/*
BlueZ - Bluetooth protocol stack for Linux
Copyright (C) 2014 Intel Corporation
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
SOFTWARE IS DISCLAIMED.
*/
#include <linux/sched/signal.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/mgmt.h>
#include "smp.h"
#include "hci_request.h"
#define HCI_REQ_DONE 0
#define HCI_REQ_PEND 1
#define HCI_REQ_CANCELED 2
#define LE_SUSPEND_SCAN_WINDOW 0x0012
#define LE_SUSPEND_SCAN_INTERVAL 0x0060
void hci_req_init(struct hci_request *req, struct hci_dev *hdev)
{
skb_queue_head_init(&req->cmd_q);
req->hdev = hdev;
req->err = 0;
}
void hci_req_purge(struct hci_request *req)
{
skb_queue_purge(&req->cmd_q);
}
Bluetooth: Ignore CC events not matching the last HCI command This commit makes the kernel not send the next queued HCI command until a command complete arrives for the last HCI command sent to the controller. This change avoids a problem with some buggy controllers (seen on two SKUs of QCA9377) that send an extra command complete event for the previous command after the kernel had already sent a new HCI command to the controller. The problem was reproduced when starting an active scanning procedure, where an extra command complete event arrives for the LE_SET_RANDOM_ADDR command. When this happends the kernel ends up not processing the command complete for the following commmand, LE_SET_SCAN_PARAM, and ultimately behaving as if a passive scanning procedure was being performed, when in fact controller is performing an active scanning procedure. This makes it impossible to discover BLE devices as no device found events are sent to userspace. This problem is reproducible on 100% of the attempts on the affected controllers. The extra command complete event can be seen at timestamp 27.420131 on the btmon logs bellow. Bluetooth monitor ver 5.50 = Note: Linux version 5.0.0+ (x86_64) 0.352340 = Note: Bluetooth subsystem version 2.22 0.352343 = New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344 = Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345 = Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347 @ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366 @ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164 @ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310 Address type: 0x06 LE Public LE Random < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496 Address: 15:60:F2:91:B2:24 (Non-Resolvable) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244 Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059 Start Discovery (0x0023) plen 1 Status: Success (0x00) Address type: 0x06 LE Public LE Random @ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-02 09:01:52 +07:00
bool hci_req_status_pend(struct hci_dev *hdev)
{
return hdev->req_status == HCI_REQ_PEND;
}
static int req_run(struct hci_request *req, hci_req_complete_t complete,
hci_req_complete_skb_t complete_skb)
{
struct hci_dev *hdev = req->hdev;
struct sk_buff *skb;
unsigned long flags;
BT_DBG("length %u", skb_queue_len(&req->cmd_q));
/* If an error occurred during request building, remove all HCI
* commands queued on the HCI request queue.
*/
if (req->err) {
skb_queue_purge(&req->cmd_q);
return req->err;
}
/* Do not allow empty requests */
if (skb_queue_empty(&req->cmd_q))
return -ENODATA;
skb = skb_peek_tail(&req->cmd_q);
if (complete) {
bt_cb(skb)->hci.req_complete = complete;
} else if (complete_skb) {
bt_cb(skb)->hci.req_complete_skb = complete_skb;
bt_cb(skb)->hci.req_flags |= HCI_REQ_SKB;
}
spin_lock_irqsave(&hdev->cmd_q.lock, flags);
skb_queue_splice_tail(&req->cmd_q, &hdev->cmd_q);
spin_unlock_irqrestore(&hdev->cmd_q.lock, flags);
queue_work(hdev->workqueue, &hdev->cmd_work);
return 0;
}
int hci_req_run(struct hci_request *req, hci_req_complete_t complete)
{
return req_run(req, complete, NULL);
}
int hci_req_run_skb(struct hci_request *req, hci_req_complete_skb_t complete)
{
return req_run(req, NULL, complete);
}
static void hci_req_sync_complete(struct hci_dev *hdev, u8 result, u16 opcode,
struct sk_buff *skb)
{
BT_DBG("%s result 0x%2.2x", hdev->name, result);
if (hdev->req_status == HCI_REQ_PEND) {
hdev->req_result = result;
hdev->req_status = HCI_REQ_DONE;
if (skb)
hdev->req_skb = skb_get(skb);
wake_up_interruptible(&hdev->req_wait_q);
}
}
void hci_req_sync_cancel(struct hci_dev *hdev, int err)
{
BT_DBG("%s err 0x%2.2x", hdev->name, err);
if (hdev->req_status == HCI_REQ_PEND) {
hdev->req_result = err;
hdev->req_status = HCI_REQ_CANCELED;
wake_up_interruptible(&hdev->req_wait_q);
}
}
struct sk_buff *__hci_cmd_sync_ev(struct hci_dev *hdev, u16 opcode, u32 plen,
const void *param, u8 event, u32 timeout)
{
struct hci_request req;
struct sk_buff *skb;
int err = 0;
BT_DBG("%s", hdev->name);
hci_req_init(&req, hdev);
hci_req_add_ev(&req, opcode, plen, param, event);
hdev->req_status = HCI_REQ_PEND;
err = hci_req_run_skb(&req, hci_req_sync_complete);
if (err < 0)
return ERR_PTR(err);
err = wait_event_interruptible_timeout(hdev->req_wait_q,
hdev->req_status != HCI_REQ_PEND, timeout);
if (err == -ERESTARTSYS)
return ERR_PTR(-EINTR);
switch (hdev->req_status) {
case HCI_REQ_DONE:
err = -bt_to_errno(hdev->req_result);
break;
case HCI_REQ_CANCELED:
err = -hdev->req_result;
break;
default:
err = -ETIMEDOUT;
break;
}
hdev->req_status = hdev->req_result = 0;
skb = hdev->req_skb;
hdev->req_skb = NULL;
BT_DBG("%s end: err %d", hdev->name, err);
if (err < 0) {
kfree_skb(skb);
return ERR_PTR(err);
}
if (!skb)
return ERR_PTR(-ENODATA);
return skb;
}
EXPORT_SYMBOL(__hci_cmd_sync_ev);
struct sk_buff *__hci_cmd_sync(struct hci_dev *hdev, u16 opcode, u32 plen,
const void *param, u32 timeout)
{
return __hci_cmd_sync_ev(hdev, opcode, plen, param, 0, timeout);
}
EXPORT_SYMBOL(__hci_cmd_sync);
/* Execute request and wait for completion. */
int __hci_req_sync(struct hci_dev *hdev, int (*func)(struct hci_request *req,
unsigned long opt),
unsigned long opt, u32 timeout, u8 *hci_status)
{
struct hci_request req;
int err = 0;
BT_DBG("%s start", hdev->name);
hci_req_init(&req, hdev);
hdev->req_status = HCI_REQ_PEND;
err = func(&req, opt);
if (err) {
if (hci_status)
*hci_status = HCI_ERROR_UNSPECIFIED;
return err;
}
err = hci_req_run_skb(&req, hci_req_sync_complete);
if (err < 0) {
hdev->req_status = 0;
/* ENODATA means the HCI request command queue is empty.
* This can happen when a request with conditionals doesn't
* trigger any commands to be sent. This is normal behavior
* and should not trigger an error return.
*/
if (err == -ENODATA) {
if (hci_status)
*hci_status = 0;
return 0;
}
if (hci_status)
*hci_status = HCI_ERROR_UNSPECIFIED;
return err;
}
err = wait_event_interruptible_timeout(hdev->req_wait_q,
hdev->req_status != HCI_REQ_PEND, timeout);
if (err == -ERESTARTSYS)
return -EINTR;
switch (hdev->req_status) {
case HCI_REQ_DONE:
err = -bt_to_errno(hdev->req_result);
if (hci_status)
*hci_status = hdev->req_result;
break;
case HCI_REQ_CANCELED:
err = -hdev->req_result;
if (hci_status)
*hci_status = HCI_ERROR_UNSPECIFIED;
break;
default:
err = -ETIMEDOUT;
if (hci_status)
*hci_status = HCI_ERROR_UNSPECIFIED;
break;
}
kfree_skb(hdev->req_skb);
hdev->req_skb = NULL;
hdev->req_status = hdev->req_result = 0;
BT_DBG("%s end: err %d", hdev->name, err);
return err;
}
int hci_req_sync(struct hci_dev *hdev, int (*req)(struct hci_request *req,
unsigned long opt),
unsigned long opt, u32 timeout, u8 *hci_status)
{
int ret;
if (!test_bit(HCI_UP, &hdev->flags))
return -ENETDOWN;
/* Serialize all requests */
hci_req_sync_lock(hdev);
ret = __hci_req_sync(hdev, req, opt, timeout, hci_status);
hci_req_sync_unlock(hdev);
return ret;
}
struct sk_buff *hci_prepare_cmd(struct hci_dev *hdev, u16 opcode, u32 plen,
const void *param)
{
int len = HCI_COMMAND_HDR_SIZE + plen;
struct hci_command_hdr *hdr;
struct sk_buff *skb;
skb = bt_skb_alloc(len, GFP_ATOMIC);
if (!skb)
return NULL;
hdr = skb_put(skb, HCI_COMMAND_HDR_SIZE);
hdr->opcode = cpu_to_le16(opcode);
hdr->plen = plen;
if (plen)
skb_put_data(skb, param, plen);
BT_DBG("skb len %d", skb->len);
hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
hci_skb_opcode(skb) = opcode;
return skb;
}
/* Queue a command to an asynchronous HCI request */
void hci_req_add_ev(struct hci_request *req, u16 opcode, u32 plen,
const void *param, u8 event)
{
struct hci_dev *hdev = req->hdev;
struct sk_buff *skb;
BT_DBG("%s opcode 0x%4.4x plen %d", hdev->name, opcode, plen);
/* If an error occurred during request building, there is no point in
* queueing the HCI command. We can simply return.
*/
if (req->err)
return;
skb = hci_prepare_cmd(hdev, opcode, plen, param);
if (!skb) {
bt_dev_err(hdev, "no memory for command (opcode 0x%4.4x)",
opcode);
req->err = -ENOMEM;
return;
}
if (skb_queue_empty(&req->cmd_q))
bt_cb(skb)->hci.req_flags |= HCI_REQ_START;
bt_cb(skb)->hci.req_event = event;
skb_queue_tail(&req->cmd_q, skb);
}
void hci_req_add(struct hci_request *req, u16 opcode, u32 plen,
const void *param)
{
hci_req_add_ev(req, opcode, plen, param, 0);
}
void __hci_req_write_fast_connectable(struct hci_request *req, bool enable)
{
struct hci_dev *hdev = req->hdev;
struct hci_cp_write_page_scan_activity acp;
u8 type;
if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
return;
if (hdev->hci_ver < BLUETOOTH_VER_1_2)
return;
if (enable) {
type = PAGE_SCAN_TYPE_INTERLACED;
/* 160 msec page scan interval */
acp.interval = cpu_to_le16(0x0100);
} else {
type = PAGE_SCAN_TYPE_STANDARD; /* default */
/* default 1.28 sec page scan */
acp.interval = cpu_to_le16(0x0800);
}
acp.window = cpu_to_le16(0x0012);
if (__cpu_to_le16(hdev->page_scan_interval) != acp.interval ||
__cpu_to_le16(hdev->page_scan_window) != acp.window)
hci_req_add(req, HCI_OP_WRITE_PAGE_SCAN_ACTIVITY,
sizeof(acp), &acp);
if (hdev->page_scan_type != type)
hci_req_add(req, HCI_OP_WRITE_PAGE_SCAN_TYPE, 1, &type);
}
/* This function controls the background scanning based on hdev->pend_le_conns
* list. If there are pending LE connection we start the background scanning,
* otherwise we stop it.
*
* This function requires the caller holds hdev->lock.
*/
static void __hci_update_background_scan(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
if (!test_bit(HCI_UP, &hdev->flags) ||
test_bit(HCI_INIT, &hdev->flags) ||
hci_dev_test_flag(hdev, HCI_SETUP) ||
hci_dev_test_flag(hdev, HCI_CONFIG) ||
hci_dev_test_flag(hdev, HCI_AUTO_OFF) ||
hci_dev_test_flag(hdev, HCI_UNREGISTER))
return;
/* No point in doing scanning if LE support hasn't been enabled */
if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED))
return;
/* If discovery is active don't interfere with it */
if (hdev->discovery.state != DISCOVERY_STOPPED)
return;
/* Reset RSSI and UUID filters when starting background scanning
* since these filters are meant for service discovery only.
*
* The Start Discovery and Start Service Discovery operations
* ensure to set proper values for RSSI threshold and UUID
* filter list. So it is safe to just reset them here.
*/
hci_discovery_filter_clear(hdev);
if (list_empty(&hdev->pend_le_conns) &&
list_empty(&hdev->pend_le_reports)) {
/* If there is no pending LE connections or devices
* to be scanned for, we should stop the background
* scanning.
*/
/* If controller is not scanning we are done. */
if (!hci_dev_test_flag(hdev, HCI_LE_SCAN))
return;
hci_req_add_le_scan_disable(req);
BT_DBG("%s stopping background scanning", hdev->name);
} else {
/* If there is at least one pending LE connection, we should
* keep the background scan running.
*/
/* If controller is connecting, we should not start scanning
* since some controllers are not able to scan and connect at
* the same time.
*/
if (hci_lookup_le_connect(hdev))
return;
/* If controller is currently scanning, we stop it to ensure we
* don't miss any advertising (due to duplicates filter).
*/
if (hci_dev_test_flag(hdev, HCI_LE_SCAN))
hci_req_add_le_scan_disable(req);
hci_req_add_le_passive_scan(req);
BT_DBG("%s starting background scanning", hdev->name);
}
}
void __hci_req_update_name(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
struct hci_cp_write_local_name cp;
memcpy(cp.name, hdev->dev_name, sizeof(cp.name));
hci_req_add(req, HCI_OP_WRITE_LOCAL_NAME, sizeof(cp), &cp);
}
#define PNP_INFO_SVCLASS_ID 0x1200
static u8 *create_uuid16_list(struct hci_dev *hdev, u8 *data, ptrdiff_t len)
{
u8 *ptr = data, *uuids_start = NULL;
struct bt_uuid *uuid;
if (len < 4)
return ptr;
list_for_each_entry(uuid, &hdev->uuids, list) {
u16 uuid16;
if (uuid->size != 16)
continue;
uuid16 = get_unaligned_le16(&uuid->uuid[12]);
if (uuid16 < 0x1100)
continue;
if (uuid16 == PNP_INFO_SVCLASS_ID)
continue;
if (!uuids_start) {
uuids_start = ptr;
uuids_start[0] = 1;
uuids_start[1] = EIR_UUID16_ALL;
ptr += 2;
}
/* Stop if not enough space to put next UUID */
if ((ptr - data) + sizeof(u16) > len) {
uuids_start[1] = EIR_UUID16_SOME;
break;
}
*ptr++ = (uuid16 & 0x00ff);
*ptr++ = (uuid16 & 0xff00) >> 8;
uuids_start[0] += sizeof(uuid16);
}
return ptr;
}
static u8 *create_uuid32_list(struct hci_dev *hdev, u8 *data, ptrdiff_t len)
{
u8 *ptr = data, *uuids_start = NULL;
struct bt_uuid *uuid;
if (len < 6)
return ptr;
list_for_each_entry(uuid, &hdev->uuids, list) {
if (uuid->size != 32)
continue;
if (!uuids_start) {
uuids_start = ptr;
uuids_start[0] = 1;
uuids_start[1] = EIR_UUID32_ALL;
ptr += 2;
}
/* Stop if not enough space to put next UUID */
if ((ptr - data) + sizeof(u32) > len) {
uuids_start[1] = EIR_UUID32_SOME;
break;
}
memcpy(ptr, &uuid->uuid[12], sizeof(u32));
ptr += sizeof(u32);
uuids_start[0] += sizeof(u32);
}
return ptr;
}
static u8 *create_uuid128_list(struct hci_dev *hdev, u8 *data, ptrdiff_t len)
{
u8 *ptr = data, *uuids_start = NULL;
struct bt_uuid *uuid;
if (len < 18)
return ptr;
list_for_each_entry(uuid, &hdev->uuids, list) {
if (uuid->size != 128)
continue;
if (!uuids_start) {
uuids_start = ptr;
uuids_start[0] = 1;
uuids_start[1] = EIR_UUID128_ALL;
ptr += 2;
}
/* Stop if not enough space to put next UUID */
if ((ptr - data) + 16 > len) {
uuids_start[1] = EIR_UUID128_SOME;
break;
}
memcpy(ptr, uuid->uuid, 16);
ptr += 16;
uuids_start[0] += 16;
}
return ptr;
}
static void create_eir(struct hci_dev *hdev, u8 *data)
{
u8 *ptr = data;
size_t name_len;
name_len = strlen(hdev->dev_name);
if (name_len > 0) {
/* EIR Data type */
if (name_len > 48) {
name_len = 48;
ptr[1] = EIR_NAME_SHORT;
} else
ptr[1] = EIR_NAME_COMPLETE;
/* EIR Data length */
ptr[0] = name_len + 1;
memcpy(ptr + 2, hdev->dev_name, name_len);
ptr += (name_len + 2);
}
if (hdev->inq_tx_power != HCI_TX_POWER_INVALID) {
ptr[0] = 2;
ptr[1] = EIR_TX_POWER;
ptr[2] = (u8) hdev->inq_tx_power;
ptr += 3;
}
if (hdev->devid_source > 0) {
ptr[0] = 9;
ptr[1] = EIR_DEVICE_ID;
put_unaligned_le16(hdev->devid_source, ptr + 2);
put_unaligned_le16(hdev->devid_vendor, ptr + 4);
put_unaligned_le16(hdev->devid_product, ptr + 6);
put_unaligned_le16(hdev->devid_version, ptr + 8);
ptr += 10;
}
ptr = create_uuid16_list(hdev, ptr, HCI_MAX_EIR_LENGTH - (ptr - data));
ptr = create_uuid32_list(hdev, ptr, HCI_MAX_EIR_LENGTH - (ptr - data));
ptr = create_uuid128_list(hdev, ptr, HCI_MAX_EIR_LENGTH - (ptr - data));
}
void __hci_req_update_eir(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
struct hci_cp_write_eir cp;
if (!hdev_is_powered(hdev))
return;
if (!lmp_ext_inq_capable(hdev))
return;
if (!hci_dev_test_flag(hdev, HCI_SSP_ENABLED))
return;
if (hci_dev_test_flag(hdev, HCI_SERVICE_CACHE))
return;
memset(&cp, 0, sizeof(cp));
create_eir(hdev, cp.data);
if (memcmp(cp.data, hdev->eir, sizeof(cp.data)) == 0)
return;
memcpy(hdev->eir, cp.data, sizeof(cp.data));
hci_req_add(req, HCI_OP_WRITE_EIR, sizeof(cp), &cp);
}
void hci_req_add_le_scan_disable(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
if (hdev->scanning_paused) {
bt_dev_dbg(hdev, "Scanning is paused for suspend");
return;
}
if (use_ext_scan(hdev)) {
struct hci_cp_le_set_ext_scan_enable cp;
memset(&cp, 0, sizeof(cp));
cp.enable = LE_SCAN_DISABLE;
hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE, sizeof(cp),
&cp);
} else {
struct hci_cp_le_set_scan_enable cp;
memset(&cp, 0, sizeof(cp));
cp.enable = LE_SCAN_DISABLE;
hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
}
}
static void del_from_white_list(struct hci_request *req, bdaddr_t *bdaddr,
u8 bdaddr_type)
{
struct hci_cp_le_del_from_white_list cp;
cp.bdaddr_type = bdaddr_type;
bacpy(&cp.bdaddr, bdaddr);
bt_dev_dbg(req->hdev, "Remove %pMR (0x%x) from whitelist", &cp.bdaddr,
cp.bdaddr_type);
hci_req_add(req, HCI_OP_LE_DEL_FROM_WHITE_LIST, sizeof(cp), &cp);
}
/* Adds connection to white list if needed. On error, returns -1. */
static int add_to_white_list(struct hci_request *req,
struct hci_conn_params *params, u8 *num_entries,
bool allow_rpa)
{
struct hci_cp_le_add_to_white_list cp;
struct hci_dev *hdev = req->hdev;
/* Already in white list */
if (hci_bdaddr_list_lookup(&hdev->le_white_list, &params->addr,
params->addr_type))
return 0;
/* Select filter policy to accept all advertising */
if (*num_entries >= hdev->le_white_list_size)
return -1;
/* White list can not be used with RPAs */
if (!allow_rpa &&
hci_find_irk_by_addr(hdev, &params->addr, params->addr_type)) {
return -1;
}
/* During suspend, only wakeable devices can be in whitelist */
if (hdev->suspended && !params->wakeable)
return 0;
*num_entries += 1;
cp.bdaddr_type = params->addr_type;
bacpy(&cp.bdaddr, &params->addr);
bt_dev_dbg(hdev, "Add %pMR (0x%x) to whitelist", &cp.bdaddr,
cp.bdaddr_type);
hci_req_add(req, HCI_OP_LE_ADD_TO_WHITE_LIST, sizeof(cp), &cp);
return 0;
}
static u8 update_white_list(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
struct hci_conn_params *params;
struct bdaddr_list *b;
u8 num_entries = 0;
bool pend_conn, pend_report;
/* We allow whitelisting even with RPAs in suspend. In the worst case,
* we won't be able to wake from devices that use the privacy1.2
* features. Additionally, once we support privacy1.2 and IRK
* offloading, we can update this to also check for those conditions.
*/
bool allow_rpa = hdev->suspended;
/* Go through the current white list programmed into the
* controller one by one and check if that address is still
* in the list of pending connections or list of devices to
* report. If not present in either list, then queue the
* command to remove it from the controller.
*/
list_for_each_entry(b, &hdev->le_white_list, list) {
pend_conn = hci_pend_le_action_lookup(&hdev->pend_le_conns,
&b->bdaddr,
b->bdaddr_type);
pend_report = hci_pend_le_action_lookup(&hdev->pend_le_reports,
&b->bdaddr,
b->bdaddr_type);
/* If the device is not likely to connect or report,
* remove it from the whitelist.
*/
if (!pend_conn && !pend_report) {
del_from_white_list(req, &b->bdaddr, b->bdaddr_type);
continue;
}
/* White list can not be used with RPAs */
if (!allow_rpa &&
hci_find_irk_by_addr(hdev, &b->bdaddr, b->bdaddr_type)) {
return 0x00;
}
num_entries++;
}
/* Since all no longer valid white list entries have been
* removed, walk through the list of pending connections
* and ensure that any new device gets programmed into
* the controller.
*
* If the list of the devices is larger than the list of
* available white list entries in the controller, then
* just abort and return filer policy value to not use the
* white list.
*/
list_for_each_entry(params, &hdev->pend_le_conns, action) {
if (add_to_white_list(req, params, &num_entries, allow_rpa))
return 0x00;
}
/* After adding all new pending connections, walk through
* the list of pending reports and also add these to the
* white list if there is still space. Abort if space runs out.
*/
list_for_each_entry(params, &hdev->pend_le_reports, action) {
if (add_to_white_list(req, params, &num_entries, allow_rpa))
return 0x00;
}
/* Select filter policy to use white list */
return 0x01;
}
static bool scan_use_rpa(struct hci_dev *hdev)
{
return hci_dev_test_flag(hdev, HCI_PRIVACY);
}
static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
u16 window, u8 own_addr_type, u8 filter_policy)
{
struct hci_dev *hdev = req->hdev;
/* Use ext scanning if set ext scan param and ext scan enable is
* supported
*/
if (use_ext_scan(hdev)) {
struct hci_cp_le_set_ext_scan_params *ext_param_cp;
struct hci_cp_le_set_ext_scan_enable ext_enable_cp;
struct hci_cp_le_scan_phy_params *phy_params;
u8 data[sizeof(*ext_param_cp) + sizeof(*phy_params) * 2];
u32 plen;
ext_param_cp = (void *)data;
phy_params = (void *)ext_param_cp->data;
memset(ext_param_cp, 0, sizeof(*ext_param_cp));
ext_param_cp->own_addr_type = own_addr_type;
ext_param_cp->filter_policy = filter_policy;
plen = sizeof(*ext_param_cp);
if (scan_1m(hdev) || scan_2m(hdev)) {
ext_param_cp->scanning_phys |= LE_SCAN_PHY_1M;
memset(phy_params, 0, sizeof(*phy_params));
phy_params->type = type;
phy_params->interval = cpu_to_le16(interval);
phy_params->window = cpu_to_le16(window);
plen += sizeof(*phy_params);
phy_params++;
}
if (scan_coded(hdev)) {
ext_param_cp->scanning_phys |= LE_SCAN_PHY_CODED;
memset(phy_params, 0, sizeof(*phy_params));
phy_params->type = type;
phy_params->interval = cpu_to_le16(interval);
phy_params->window = cpu_to_le16(window);
plen += sizeof(*phy_params);
phy_params++;
}
hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_PARAMS,
plen, ext_param_cp);
memset(&ext_enable_cp, 0, sizeof(ext_enable_cp));
ext_enable_cp.enable = LE_SCAN_ENABLE;
ext_enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE,
sizeof(ext_enable_cp), &ext_enable_cp);
} else {
struct hci_cp_le_set_scan_param param_cp;
struct hci_cp_le_set_scan_enable enable_cp;
memset(&param_cp, 0, sizeof(param_cp));
param_cp.type = type;
param_cp.interval = cpu_to_le16(interval);
param_cp.window = cpu_to_le16(window);
param_cp.own_address_type = own_addr_type;
param_cp.filter_policy = filter_policy;
hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
&param_cp);
memset(&enable_cp, 0, sizeof(enable_cp));
enable_cp.enable = LE_SCAN_ENABLE;
enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
&enable_cp);
}
}
void hci_req_add_le_passive_scan(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
u8 own_addr_type;
u8 filter_policy;
u8 window, interval;
if (hdev->scanning_paused) {
bt_dev_dbg(hdev, "Scanning is paused for suspend");
return;
}
/* Set require_privacy to false since no SCAN_REQ are send
* during passive scanning. Not using an non-resolvable address
* here is important so that peer devices using direct
* advertising with our address will be correctly reported
* by the controller.
*/
if (hci_update_random_address(req, false, scan_use_rpa(hdev),
&own_addr_type))
return;
/* Adding or removing entries from the white list must
* happen before enabling scanning. The controller does
* not allow white list modification while scanning.
*/
filter_policy = update_white_list(req);
/* When the controller is using random resolvable addresses and
* with that having LE privacy enabled, then controllers with
* Extended Scanner Filter Policies support can now enable support
* for handling directed advertising.
*
* So instead of using filter polices 0x00 (no whitelist)
* and 0x01 (whitelist enabled) use the new filter policies
* 0x02 (no whitelist) and 0x03 (whitelist enabled).
*/
if (hci_dev_test_flag(hdev, HCI_PRIVACY) &&
(hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY))
filter_policy |= 0x02;
if (hdev->suspended) {
window = LE_SUSPEND_SCAN_WINDOW;
interval = LE_SUSPEND_SCAN_INTERVAL;
} else {
window = hdev->le_scan_window;
interval = hdev->le_scan_interval;
}
bt_dev_dbg(hdev, "LE passive scan with whitelist = %d", filter_policy);
hci_req_start_scan(req, LE_SCAN_PASSIVE, interval, window,
own_addr_type, filter_policy);
}
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
static u8 get_adv_instance_scan_rsp_len(struct hci_dev *hdev, u8 instance)
{
struct adv_info *adv_instance;
/* Instance 0x00 always set local name */
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
if (instance == 0x00)
return 1;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
adv_instance = hci_find_adv_instance(hdev, instance);
if (!adv_instance)
return 0;
/* TODO: Take into account the "appearance" and "local-name" flags here.
* These are currently being ignored as they are not supported.
*/
return adv_instance->scan_rsp_len;
}
static void hci_req_clear_event_filter(struct hci_request *req)
{
struct hci_cp_set_event_filter f;
memset(&f, 0, sizeof(f));
f.flt_type = HCI_FLT_CLEAR_ALL;
hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &f);
/* Update page scan state (since we may have modified it when setting
* the event filter).
*/
__hci_req_update_scan(req);
}
static void hci_req_set_event_filter(struct hci_request *req)
{
struct bdaddr_list *b;
struct hci_cp_set_event_filter f;
struct hci_dev *hdev = req->hdev;
u8 scan;
/* Always clear event filter when starting */
hci_req_clear_event_filter(req);
list_for_each_entry(b, &hdev->wakeable, list) {
memset(&f, 0, sizeof(f));
bacpy(&f.addr_conn_flt.bdaddr, &b->bdaddr);
f.flt_type = HCI_FLT_CONN_SETUP;
f.cond_type = HCI_CONN_SETUP_ALLOW_BDADDR;
f.addr_conn_flt.auto_accept = HCI_CONN_SETUP_AUTO_ON;
bt_dev_dbg(hdev, "Adding event filters for %pMR", &b->bdaddr);
hci_req_add(req, HCI_OP_SET_EVENT_FLT, sizeof(f), &f);
}
scan = !list_empty(&hdev->wakeable) ? SCAN_PAGE : SCAN_DISABLED;
hci_req_add(req, HCI_OP_WRITE_SCAN_ENABLE, 1, &scan);
}
static void hci_req_config_le_suspend_scan(struct hci_request *req)
{
/* Can't change params without disabling first */
hci_req_add_le_scan_disable(req);
/* Configure params and enable scanning */
hci_req_add_le_passive_scan(req);
/* Block suspend notifier on response */
set_bit(SUSPEND_SCAN_ENABLE, req->hdev->suspend_tasks);
}
static void suspend_req_complete(struct hci_dev *hdev, u8 status, u16 opcode)
{
bt_dev_dbg(hdev, "Request complete opcode=0x%x, status=0x%x", opcode,
status);
if (test_and_clear_bit(SUSPEND_SCAN_ENABLE, hdev->suspend_tasks) ||
test_and_clear_bit(SUSPEND_SCAN_DISABLE, hdev->suspend_tasks)) {
wake_up(&hdev->suspend_wait_q);
}
}
/* Call with hci_dev_lock */
void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next)
{
int old_state;
struct hci_conn *conn;
struct hci_request req;
u8 page_scan;
int disconnect_counter;
if (next == hdev->suspend_state) {
bt_dev_dbg(hdev, "Same state before and after: %d", next);
goto done;
}
hdev->suspend_state = next;
hci_req_init(&req, hdev);
if (next == BT_SUSPEND_DISCONNECT) {
/* Mark device as suspended */
hdev->suspended = true;
/* Pause discovery if not already stopped */
old_state = hdev->discovery.state;
if (old_state != DISCOVERY_STOPPED) {
set_bit(SUSPEND_PAUSE_DISCOVERY, hdev->suspend_tasks);
hci_discovery_set_state(hdev, DISCOVERY_STOPPING);
queue_work(hdev->req_workqueue, &hdev->discov_update);
}
hdev->discovery_paused = true;
hdev->discovery_old_state = old_state;
/* Stop advertising */
old_state = hci_dev_test_flag(hdev, HCI_ADVERTISING);
if (old_state) {
set_bit(SUSPEND_PAUSE_ADVERTISING, hdev->suspend_tasks);
cancel_delayed_work(&hdev->discov_off);
queue_delayed_work(hdev->req_workqueue,
&hdev->discov_off, 0);
}
hdev->advertising_paused = true;
hdev->advertising_old_state = old_state;
/* Disable page scan */
page_scan = SCAN_DISABLED;
hci_req_add(&req, HCI_OP_WRITE_SCAN_ENABLE, 1, &page_scan);
/* Disable LE passive scan */
hci_req_add_le_scan_disable(&req);
/* Mark task needing completion */
set_bit(SUSPEND_SCAN_DISABLE, hdev->suspend_tasks);
/* Prevent disconnects from causing scanning to be re-enabled */
hdev->scanning_paused = true;
/* Run commands before disconnecting */
hci_req_run(&req, suspend_req_complete);
disconnect_counter = 0;
/* Soft disconnect everything (power off) */
list_for_each_entry(conn, &hdev->conn_hash.list, list) {
hci_disconnect(conn, HCI_ERROR_REMOTE_POWER_OFF);
disconnect_counter++;
}
if (disconnect_counter > 0) {
bt_dev_dbg(hdev,
"Had %d disconnects. Will wait on them",
disconnect_counter);
set_bit(SUSPEND_DISCONNECTING, hdev->suspend_tasks);
}
} else if (next == BT_SUSPEND_COMPLETE) {
/* Unpause to take care of updating scanning params */
hdev->scanning_paused = false;
/* Enable event filter for paired devices */
hci_req_set_event_filter(&req);
/* Enable passive scan at lower duty cycle */
hci_req_config_le_suspend_scan(&req);
/* Pause scan changes again. */
hdev->scanning_paused = true;
hci_req_run(&req, suspend_req_complete);
} else {
hdev->suspended = false;
hdev->scanning_paused = false;
hci_req_clear_event_filter(&req);
/* Reset passive/background scanning to normal */
hci_req_config_le_suspend_scan(&req);
/* Unpause advertising */
hdev->advertising_paused = false;
if (hdev->advertising_old_state) {
set_bit(SUSPEND_UNPAUSE_ADVERTISING,
hdev->suspend_tasks);
hci_dev_set_flag(hdev, HCI_ADVERTISING);
queue_work(hdev->req_workqueue,
&hdev->discoverable_update);
hdev->advertising_old_state = 0;
}
/* Unpause discovery */
hdev->discovery_paused = false;
if (hdev->discovery_old_state != DISCOVERY_STOPPED &&
hdev->discovery_old_state != DISCOVERY_STOPPING) {
set_bit(SUSPEND_UNPAUSE_DISCOVERY, hdev->suspend_tasks);
hci_discovery_set_state(hdev, DISCOVERY_STARTING);
queue_work(hdev->req_workqueue, &hdev->discov_update);
}
hci_req_run(&req, suspend_req_complete);
}
hdev->suspend_state = next;
done:
clear_bit(SUSPEND_PREPARE_NOTIFIER, hdev->suspend_tasks);
wake_up(&hdev->suspend_wait_q);
}
static u8 get_cur_adv_instance_scan_rsp_len(struct hci_dev *hdev)
{
u8 instance = hdev->cur_adv_instance;
struct adv_info *adv_instance;
/* Instance 0x00 always set local name */
if (instance == 0x00)
return 1;
adv_instance = hci_find_adv_instance(hdev, instance);
if (!adv_instance)
return 0;
/* TODO: Take into account the "appearance" and "local-name" flags here.
* These are currently being ignored as they are not supported.
*/
return adv_instance->scan_rsp_len;
}
void __hci_req_disable_advertising(struct hci_request *req)
{
if (ext_adv_capable(req->hdev)) {
struct hci_cp_le_set_ext_adv_enable cp;
cp.enable = 0x00;
/* Disable all sets since we only support one set at the moment */
cp.num_of_sets = 0x00;
hci_req_add(req, HCI_OP_LE_SET_EXT_ADV_ENABLE, sizeof(cp), &cp);
} else {
u8 enable = 0x00;
hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable), &enable);
}
}
static u32 get_adv_instance_flags(struct hci_dev *hdev, u8 instance)
{
u32 flags;
struct adv_info *adv_instance;
if (instance == 0x00) {
/* Instance 0 always manages the "Tx Power" and "Flags"
* fields
*/
flags = MGMT_ADV_FLAG_TX_POWER | MGMT_ADV_FLAG_MANAGED_FLAGS;
/* For instance 0, the HCI_ADVERTISING_CONNECTABLE setting
* corresponds to the "connectable" instance flag.
*/
if (hci_dev_test_flag(hdev, HCI_ADVERTISING_CONNECTABLE))
flags |= MGMT_ADV_FLAG_CONNECTABLE;
if (hci_dev_test_flag(hdev, HCI_LIMITED_DISCOVERABLE))
flags |= MGMT_ADV_FLAG_LIMITED_DISCOV;
else if (hci_dev_test_flag(hdev, HCI_DISCOVERABLE))
flags |= MGMT_ADV_FLAG_DISCOV;
return flags;
}
adv_instance = hci_find_adv_instance(hdev, instance);
/* Return 0 when we got an invalid instance identifier. */
if (!adv_instance)
return 0;
return adv_instance->flags;
}
static bool adv_use_rpa(struct hci_dev *hdev, uint32_t flags)
{
/* If privacy is not enabled don't use RPA */
if (!hci_dev_test_flag(hdev, HCI_PRIVACY))
return false;
/* If basic privacy mode is enabled use RPA */
if (!hci_dev_test_flag(hdev, HCI_LIMITED_PRIVACY))
return true;
/* If limited privacy mode is enabled don't use RPA if we're
* both discoverable and bondable.
*/
if ((flags & MGMT_ADV_FLAG_DISCOV) &&
hci_dev_test_flag(hdev, HCI_BONDABLE))
return false;
/* We're neither bondable nor discoverable in the limited
* privacy mode, therefore use RPA.
*/
return true;
}
static bool is_advertising_allowed(struct hci_dev *hdev, bool connectable)
{
/* If there is no connection we are OK to advertise. */
if (hci_conn_num(hdev, LE_LINK) == 0)
return true;
/* Check le_states if there is any connection in slave role. */
if (hdev->conn_hash.le_num_slave > 0) {
/* Slave connection state and non connectable mode bit 20. */
if (!connectable && !(hdev->le_states[2] & 0x10))
return false;
/* Slave connection state and connectable mode bit 38
* and scannable bit 21.
*/
if (connectable && (!(hdev->le_states[4] & 0x40) ||
!(hdev->le_states[2] & 0x20)))
return false;
}
/* Check le_states if there is any connection in master role. */
if (hci_conn_num(hdev, LE_LINK) != hdev->conn_hash.le_num_slave) {
/* Master connection state and non connectable mode bit 18. */
if (!connectable && !(hdev->le_states[2] & 0x02))
return false;
/* Master connection state and connectable mode bit 35 and
* scannable 19.
*/
if (connectable && (!(hdev->le_states[4] & 0x08) ||
!(hdev->le_states[2] & 0x08)))
return false;
}
return true;
}
void __hci_req_enable_advertising(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
struct hci_cp_le_set_adv_param cp;
u8 own_addr_type, enable = 0x01;
bool connectable;
u16 adv_min_interval, adv_max_interval;
u32 flags;
flags = get_adv_instance_flags(hdev, hdev->cur_adv_instance);
/* If the "connectable" instance flag was not set, then choose between
* ADV_IND and ADV_NONCONN_IND based on the global connectable setting.
*/
connectable = (flags & MGMT_ADV_FLAG_CONNECTABLE) ||
mgmt_get_connectable(hdev);
if (!is_advertising_allowed(hdev, connectable))
return;
if (hci_dev_test_flag(hdev, HCI_LE_ADV))
__hci_req_disable_advertising(req);
/* Clear the HCI_LE_ADV bit temporarily so that the
* hci_update_random_address knows that it's safe to go ahead
* and write a new random address. The flag will be set back on
* as soon as the SET_ADV_ENABLE HCI command completes.
*/
hci_dev_clear_flag(hdev, HCI_LE_ADV);
/* Set require_privacy to true only when non-connectable
* advertising is used. In that case it is fine to use a
* non-resolvable private address.
*/
if (hci_update_random_address(req, !connectable,
adv_use_rpa(hdev, flags),
&own_addr_type) < 0)
return;
memset(&cp, 0, sizeof(cp));
if (connectable) {
cp.type = LE_ADV_IND;
adv_min_interval = hdev->le_adv_min_interval;
adv_max_interval = hdev->le_adv_max_interval;
} else {
if (get_cur_adv_instance_scan_rsp_len(hdev))
cp.type = LE_ADV_SCAN_IND;
else
cp.type = LE_ADV_NONCONN_IND;
if (!hci_dev_test_flag(hdev, HCI_DISCOVERABLE) ||
hci_dev_test_flag(hdev, HCI_LIMITED_DISCOVERABLE)) {
adv_min_interval = DISCOV_LE_FAST_ADV_INT_MIN;
adv_max_interval = DISCOV_LE_FAST_ADV_INT_MAX;
} else {
adv_min_interval = hdev->le_adv_min_interval;
adv_max_interval = hdev->le_adv_max_interval;
}
}
cp.min_interval = cpu_to_le16(adv_min_interval);
cp.max_interval = cpu_to_le16(adv_max_interval);
cp.own_address_type = own_addr_type;
cp.channel_map = hdev->le_adv_channel_map;
hci_req_add(req, HCI_OP_LE_SET_ADV_PARAM, sizeof(cp), &cp);
hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable), &enable);
}
u8 append_local_name(struct hci_dev *hdev, u8 *ptr, u8 ad_len)
{
size_t short_len;
size_t complete_len;
/* no space left for name (+ NULL + type + len) */
if ((HCI_MAX_AD_LENGTH - ad_len) < HCI_MAX_SHORT_NAME_LENGTH + 3)
return ad_len;
/* use complete name if present and fits */
complete_len = strlen(hdev->dev_name);
if (complete_len && complete_len <= HCI_MAX_SHORT_NAME_LENGTH)
return eir_append_data(ptr, ad_len, EIR_NAME_COMPLETE,
hdev->dev_name, complete_len + 1);
/* use short name if present */
short_len = strlen(hdev->short_name);
if (short_len)
return eir_append_data(ptr, ad_len, EIR_NAME_SHORT,
hdev->short_name, short_len + 1);
/* use shortened full name if present, we already know that name
* is longer then HCI_MAX_SHORT_NAME_LENGTH
*/
if (complete_len) {
u8 name[HCI_MAX_SHORT_NAME_LENGTH + 1];
memcpy(name, hdev->dev_name, HCI_MAX_SHORT_NAME_LENGTH);
name[HCI_MAX_SHORT_NAME_LENGTH] = '\0';
return eir_append_data(ptr, ad_len, EIR_NAME_SHORT, name,
sizeof(name));
}
return ad_len;
}
static u8 append_appearance(struct hci_dev *hdev, u8 *ptr, u8 ad_len)
{
return eir_append_le16(ptr, ad_len, EIR_APPEARANCE, hdev->appearance);
}
static u8 create_default_scan_rsp_data(struct hci_dev *hdev, u8 *ptr)
{
u8 scan_rsp_len = 0;
if (hdev->appearance) {
scan_rsp_len = append_appearance(hdev, ptr, scan_rsp_len);
}
return append_local_name(hdev, ptr, scan_rsp_len);
}
static u8 create_instance_scan_rsp_data(struct hci_dev *hdev, u8 instance,
u8 *ptr)
{
struct adv_info *adv_instance;
u32 instance_flags;
u8 scan_rsp_len = 0;
adv_instance = hci_find_adv_instance(hdev, instance);
if (!adv_instance)
return 0;
instance_flags = adv_instance->flags;
if ((instance_flags & MGMT_ADV_FLAG_APPEARANCE) && hdev->appearance) {
scan_rsp_len = append_appearance(hdev, ptr, scan_rsp_len);
}
memcpy(&ptr[scan_rsp_len], adv_instance->scan_rsp_data,
adv_instance->scan_rsp_len);
scan_rsp_len += adv_instance->scan_rsp_len;
if (instance_flags & MGMT_ADV_FLAG_LOCAL_NAME)
scan_rsp_len = append_local_name(hdev, ptr, scan_rsp_len);
return scan_rsp_len;
}
void __hci_req_update_scan_rsp_data(struct hci_request *req, u8 instance)
{
struct hci_dev *hdev = req->hdev;
u8 len;
if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED))
return;
if (ext_adv_capable(hdev)) {
struct hci_cp_le_set_ext_scan_rsp_data cp;
memset(&cp, 0, sizeof(cp));
if (instance)
len = create_instance_scan_rsp_data(hdev, instance,
cp.data);
else
len = create_default_scan_rsp_data(hdev, cp.data);
if (hdev->scan_rsp_data_len == len &&
!memcmp(cp.data, hdev->scan_rsp_data, len))
return;
memcpy(hdev->scan_rsp_data, cp.data, sizeof(cp.data));
hdev->scan_rsp_data_len = len;
cp.handle = 0;
cp.length = len;
cp.operation = LE_SET_ADV_DATA_OP_COMPLETE;
cp.frag_pref = LE_SET_ADV_DATA_NO_FRAG;
hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_RSP_DATA, sizeof(cp),
&cp);
} else {
struct hci_cp_le_set_scan_rsp_data cp;
memset(&cp, 0, sizeof(cp));
if (instance)
len = create_instance_scan_rsp_data(hdev, instance,
cp.data);
else
len = create_default_scan_rsp_data(hdev, cp.data);
if (hdev->scan_rsp_data_len == len &&
!memcmp(cp.data, hdev->scan_rsp_data, len))
return;
memcpy(hdev->scan_rsp_data, cp.data, sizeof(cp.data));
hdev->scan_rsp_data_len = len;
cp.length = len;
hci_req_add(req, HCI_OP_LE_SET_SCAN_RSP_DATA, sizeof(cp), &cp);
}
}
static u8 create_instance_adv_data(struct hci_dev *hdev, u8 instance, u8 *ptr)
{
struct adv_info *adv_instance = NULL;
u8 ad_len = 0, flags = 0;
u32 instance_flags;
/* Return 0 when the current instance identifier is invalid. */
if (instance) {
adv_instance = hci_find_adv_instance(hdev, instance);
if (!adv_instance)
return 0;
}
instance_flags = get_adv_instance_flags(hdev, instance);
/* If instance already has the flags set skip adding it once
* again.
*/
if (adv_instance && eir_get_data(adv_instance->adv_data,
adv_instance->adv_data_len, EIR_FLAGS,
NULL))
goto skip_flags;
/* The Add Advertising command allows userspace to set both the general
* and limited discoverable flags.
*/
if (instance_flags & MGMT_ADV_FLAG_DISCOV)
flags |= LE_AD_GENERAL;
if (instance_flags & MGMT_ADV_FLAG_LIMITED_DISCOV)
flags |= LE_AD_LIMITED;
if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
flags |= LE_AD_NO_BREDR;
if (flags || (instance_flags & MGMT_ADV_FLAG_MANAGED_FLAGS)) {
/* If a discovery flag wasn't provided, simply use the global
* settings.
*/
if (!flags)
flags |= mgmt_get_adv_discov_flags(hdev);
/* If flags would still be empty, then there is no need to
* include the "Flags" AD field".
*/
if (flags) {
ptr[0] = 0x02;
ptr[1] = EIR_FLAGS;
ptr[2] = flags;
ad_len += 3;
ptr += 3;
}
}
skip_flags:
if (adv_instance) {
memcpy(ptr, adv_instance->adv_data,
adv_instance->adv_data_len);
ad_len += adv_instance->adv_data_len;
ptr += adv_instance->adv_data_len;
}
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
if (instance_flags & MGMT_ADV_FLAG_TX_POWER) {
s8 adv_tx_power;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
if (ext_adv_capable(hdev)) {
if (adv_instance)
adv_tx_power = adv_instance->tx_power;
else
adv_tx_power = hdev->adv_tx_power;
} else {
adv_tx_power = hdev->adv_tx_power;
}
/* Provide Tx Power only if we can provide a valid value for it */
if (adv_tx_power != HCI_TX_POWER_INVALID) {
ptr[0] = 0x02;
ptr[1] = EIR_TX_POWER;
ptr[2] = (u8)adv_tx_power;
ad_len += 3;
ptr += 3;
}
}
return ad_len;
}
void __hci_req_update_adv_data(struct hci_request *req, u8 instance)
{
struct hci_dev *hdev = req->hdev;
u8 len;
if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED))
return;
if (ext_adv_capable(hdev)) {
struct hci_cp_le_set_ext_adv_data cp;
memset(&cp, 0, sizeof(cp));
len = create_instance_adv_data(hdev, instance, cp.data);
/* There's nothing to do if the data hasn't changed */
if (hdev->adv_data_len == len &&
memcmp(cp.data, hdev->adv_data, len) == 0)
return;
memcpy(hdev->adv_data, cp.data, sizeof(cp.data));
hdev->adv_data_len = len;
cp.length = len;
cp.handle = 0;
cp.operation = LE_SET_ADV_DATA_OP_COMPLETE;
cp.frag_pref = LE_SET_ADV_DATA_NO_FRAG;
hci_req_add(req, HCI_OP_LE_SET_EXT_ADV_DATA, sizeof(cp), &cp);
} else {
struct hci_cp_le_set_adv_data cp;
memset(&cp, 0, sizeof(cp));
len = create_instance_adv_data(hdev, instance, cp.data);
/* There's nothing to do if the data hasn't changed */
if (hdev->adv_data_len == len &&
memcmp(cp.data, hdev->adv_data, len) == 0)
return;
memcpy(hdev->adv_data, cp.data, sizeof(cp.data));
hdev->adv_data_len = len;
cp.length = len;
hci_req_add(req, HCI_OP_LE_SET_ADV_DATA, sizeof(cp), &cp);
}
}
int hci_req_update_adv_data(struct hci_dev *hdev, u8 instance)
{
struct hci_request req;
hci_req_init(&req, hdev);
__hci_req_update_adv_data(&req, instance);
return hci_req_run(&req, NULL);
}
static void adv_enable_complete(struct hci_dev *hdev, u8 status, u16 opcode)
{
BT_DBG("%s status %u", hdev->name, status);
}
void hci_req_reenable_advertising(struct hci_dev *hdev)
{
struct hci_request req;
if (!hci_dev_test_flag(hdev, HCI_ADVERTISING) &&
list_empty(&hdev->adv_instances))
return;
hci_req_init(&req, hdev);
if (hdev->cur_adv_instance) {
__hci_req_schedule_adv_instance(&req, hdev->cur_adv_instance,
true);
} else {
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
if (ext_adv_capable(hdev)) {
__hci_req_start_ext_adv(&req, 0x00);
} else {
__hci_req_update_adv_data(&req, 0x00);
__hci_req_update_scan_rsp_data(&req, 0x00);
__hci_req_enable_advertising(&req);
}
}
hci_req_run(&req, adv_enable_complete);
}
static void adv_timeout_expire(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev,
adv_instance_expire.work);
struct hci_request req;
u8 instance;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
hdev->adv_instance_timeout = 0;
instance = hdev->cur_adv_instance;
if (instance == 0x00)
goto unlock;
hci_req_init(&req, hdev);
hci_req_clear_adv_instance(hdev, NULL, &req, instance, false);
if (list_empty(&hdev->adv_instances))
__hci_req_disable_advertising(&req);
hci_req_run(&req, NULL);
unlock:
hci_dev_unlock(hdev);
}
int hci_get_random_address(struct hci_dev *hdev, bool require_privacy,
bool use_rpa, struct adv_info *adv_instance,
u8 *own_addr_type, bdaddr_t *rand_addr)
{
int err;
bacpy(rand_addr, BDADDR_ANY);
/* If privacy is enabled use a resolvable private address. If
* current RPA has expired then generate a new one.
*/
if (use_rpa) {
int to;
*own_addr_type = ADDR_LE_DEV_RANDOM;
if (adv_instance) {
if (!adv_instance->rpa_expired &&
!bacmp(&adv_instance->random_addr, &hdev->rpa))
return 0;
adv_instance->rpa_expired = false;
} else {
if (!hci_dev_test_and_clear_flag(hdev, HCI_RPA_EXPIRED) &&
!bacmp(&hdev->random_addr, &hdev->rpa))
return 0;
}
err = smp_generate_rpa(hdev, hdev->irk, &hdev->rpa);
if (err < 0) {
bt_dev_err(hdev, "failed to generate new RPA");
return err;
}
bacpy(rand_addr, &hdev->rpa);
to = msecs_to_jiffies(hdev->rpa_timeout * 1000);
if (adv_instance)
queue_delayed_work(hdev->workqueue,
&adv_instance->rpa_expired_cb, to);
else
queue_delayed_work(hdev->workqueue,
&hdev->rpa_expired, to);
return 0;
}
/* In case of required privacy without resolvable private address,
* use an non-resolvable private address. This is useful for
* non-connectable advertising.
*/
if (require_privacy) {
bdaddr_t nrpa;
while (true) {
/* The non-resolvable private address is generated
* from random six bytes with the two most significant
* bits cleared.
*/
get_random_bytes(&nrpa, 6);
nrpa.b[5] &= 0x3f;
/* The non-resolvable private address shall not be
* equal to the public address.
*/
if (bacmp(&hdev->bdaddr, &nrpa))
break;
}
*own_addr_type = ADDR_LE_DEV_RANDOM;
bacpy(rand_addr, &nrpa);
return 0;
}
/* No privacy so use a public address. */
*own_addr_type = ADDR_LE_DEV_PUBLIC;
return 0;
}
void __hci_req_clear_ext_adv_sets(struct hci_request *req)
{
hci_req_add(req, HCI_OP_LE_CLEAR_ADV_SETS, 0, NULL);
}
int __hci_req_setup_ext_adv_instance(struct hci_request *req, u8 instance)
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
{
struct hci_cp_le_set_ext_adv_params cp;
struct hci_dev *hdev = req->hdev;
bool connectable;
u32 flags;
bdaddr_t random_addr;
u8 own_addr_type;
int err;
struct adv_info *adv_instance;
bool secondary_adv;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
/* In ext adv set param interval is 3 octets */
const u8 adv_interval[3] = { 0x00, 0x08, 0x00 };
if (instance > 0) {
adv_instance = hci_find_adv_instance(hdev, instance);
if (!adv_instance)
return -EINVAL;
} else {
adv_instance = NULL;
}
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
flags = get_adv_instance_flags(hdev, instance);
/* If the "connectable" instance flag was not set, then choose between
* ADV_IND and ADV_NONCONN_IND based on the global connectable setting.
*/
connectable = (flags & MGMT_ADV_FLAG_CONNECTABLE) ||
mgmt_get_connectable(hdev);
if (!is_advertising_allowed(hdev, connectable))
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
return -EPERM;
/* Set require_privacy to true only when non-connectable
* advertising is used. In that case it is fine to use a
* non-resolvable private address.
*/
err = hci_get_random_address(hdev, !connectable,
adv_use_rpa(hdev, flags), adv_instance,
&own_addr_type, &random_addr);
if (err < 0)
return err;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
memset(&cp, 0, sizeof(cp));
memcpy(cp.min_interval, adv_interval, sizeof(cp.min_interval));
memcpy(cp.max_interval, adv_interval, sizeof(cp.max_interval));
secondary_adv = (flags & MGMT_ADV_FLAG_SEC_MASK);
if (connectable) {
if (secondary_adv)
cp.evt_properties = cpu_to_le16(LE_EXT_ADV_CONN_IND);
else
cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_IND);
} else if (get_adv_instance_scan_rsp_len(hdev, instance)) {
if (secondary_adv)
cp.evt_properties = cpu_to_le16(LE_EXT_ADV_SCAN_IND);
else
cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_SCAN_IND);
} else {
if (secondary_adv)
cp.evt_properties = cpu_to_le16(LE_EXT_ADV_NON_CONN_IND);
else
cp.evt_properties = cpu_to_le16(LE_LEGACY_NONCONN_IND);
}
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
cp.own_addr_type = own_addr_type;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
cp.channel_map = hdev->le_adv_channel_map;
cp.tx_power = 127;
cp.handle = instance;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
if (flags & MGMT_ADV_FLAG_SEC_2M) {
cp.primary_phy = HCI_ADV_PHY_1M;
cp.secondary_phy = HCI_ADV_PHY_2M;
} else if (flags & MGMT_ADV_FLAG_SEC_CODED) {
cp.primary_phy = HCI_ADV_PHY_CODED;
cp.secondary_phy = HCI_ADV_PHY_CODED;
} else {
/* In all other cases use 1M */
cp.primary_phy = HCI_ADV_PHY_1M;
cp.secondary_phy = HCI_ADV_PHY_1M;
}
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
hci_req_add(req, HCI_OP_LE_SET_EXT_ADV_PARAMS, sizeof(cp), &cp);
if (own_addr_type == ADDR_LE_DEV_RANDOM &&
bacmp(&random_addr, BDADDR_ANY)) {
struct hci_cp_le_set_adv_set_rand_addr cp;
/* Check if random address need to be updated */
if (adv_instance) {
if (!bacmp(&random_addr, &adv_instance->random_addr))
return 0;
} else {
if (!bacmp(&random_addr, &hdev->random_addr))
return 0;
}
memset(&cp, 0, sizeof(cp));
cp.handle = 0;
bacpy(&cp.bdaddr, &random_addr);
hci_req_add(req,
HCI_OP_LE_SET_ADV_SET_RAND_ADDR,
sizeof(cp), &cp);
}
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
return 0;
}
int __hci_req_enable_ext_advertising(struct hci_request *req, u8 instance)
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
{
struct hci_dev *hdev = req->hdev;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
struct hci_cp_le_set_ext_adv_enable *cp;
struct hci_cp_ext_adv_set *adv_set;
u8 data[sizeof(*cp) + sizeof(*adv_set) * 1];
struct adv_info *adv_instance;
if (instance > 0) {
adv_instance = hci_find_adv_instance(hdev, instance);
if (!adv_instance)
return -EINVAL;
} else {
adv_instance = NULL;
}
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
cp = (void *) data;
adv_set = (void *) cp->data;
memset(cp, 0, sizeof(*cp));
cp->enable = 0x01;
cp->num_of_sets = 0x01;
memset(adv_set, 0, sizeof(*adv_set));
adv_set->handle = instance;
/* Set duration per instance since controller is responsible for
* scheduling it.
*/
if (adv_instance && adv_instance->duration) {
u16 duration = adv_instance->timeout * MSEC_PER_SEC;
/* Time = N * 10 ms */
adv_set->duration = cpu_to_le16(duration / 10);
}
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
hci_req_add(req, HCI_OP_LE_SET_EXT_ADV_ENABLE,
sizeof(*cp) + sizeof(*adv_set) * cp->num_of_sets,
data);
return 0;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
}
int __hci_req_start_ext_adv(struct hci_request *req, u8 instance)
{
struct hci_dev *hdev = req->hdev;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
int err;
if (hci_dev_test_flag(hdev, HCI_LE_ADV))
__hci_req_disable_advertising(req);
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
err = __hci_req_setup_ext_adv_instance(req, instance);
if (err < 0)
return err;
__hci_req_update_scan_rsp_data(req, instance);
__hci_req_enable_ext_advertising(req, instance);
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
return 0;
}
int __hci_req_schedule_adv_instance(struct hci_request *req, u8 instance,
bool force)
{
struct hci_dev *hdev = req->hdev;
struct adv_info *adv_instance = NULL;
u16 timeout;
if (hci_dev_test_flag(hdev, HCI_ADVERTISING) ||
list_empty(&hdev->adv_instances))
return -EPERM;
if (hdev->adv_instance_timeout)
return -EBUSY;
adv_instance = hci_find_adv_instance(hdev, instance);
if (!adv_instance)
return -ENOENT;
/* A zero timeout means unlimited advertising. As long as there is
* only one instance, duration should be ignored. We still set a timeout
* in case further instances are being added later on.
*
* If the remaining lifetime of the instance is more than the duration
* then the timeout corresponds to the duration, otherwise it will be
* reduced to the remaining instance lifetime.
*/
if (adv_instance->timeout == 0 ||
adv_instance->duration <= adv_instance->remaining_time)
timeout = adv_instance->duration;
else
timeout = adv_instance->remaining_time;
/* The remaining time is being reduced unless the instance is being
* advertised without time limit.
*/
if (adv_instance->timeout)
adv_instance->remaining_time =
adv_instance->remaining_time - timeout;
/* Only use work for scheduling instances with legacy advertising */
if (!ext_adv_capable(hdev)) {
hdev->adv_instance_timeout = timeout;
queue_delayed_work(hdev->req_workqueue,
&hdev->adv_instance_expire,
msecs_to_jiffies(timeout * 1000));
}
/* If we're just re-scheduling the same instance again then do not
* execute any HCI commands. This happens when a single instance is
* being advertised.
*/
if (!force && hdev->cur_adv_instance == instance &&
hci_dev_test_flag(hdev, HCI_LE_ADV))
return 0;
hdev->cur_adv_instance = instance;
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
if (ext_adv_capable(hdev)) {
__hci_req_start_ext_adv(req, instance);
} else {
__hci_req_update_adv_data(req, instance);
__hci_req_update_scan_rsp_data(req, instance);
__hci_req_enable_advertising(req);
}
return 0;
}
static void cancel_adv_timeout(struct hci_dev *hdev)
{
if (hdev->adv_instance_timeout) {
hdev->adv_instance_timeout = 0;
cancel_delayed_work(&hdev->adv_instance_expire);
}
}
/* For a single instance:
* - force == true: The instance will be removed even when its remaining
* lifetime is not zero.
* - force == false: the instance will be deactivated but kept stored unless
* the remaining lifetime is zero.
*
* For instance == 0x00:
* - force == true: All instances will be removed regardless of their timeout
* setting.
* - force == false: Only instances that have a timeout will be removed.
*/
void hci_req_clear_adv_instance(struct hci_dev *hdev, struct sock *sk,
struct hci_request *req, u8 instance,
bool force)
{
struct adv_info *adv_instance, *n, *next_instance = NULL;
int err;
u8 rem_inst;
/* Cancel any timeout concerning the removed instance(s). */
if (!instance || hdev->cur_adv_instance == instance)
cancel_adv_timeout(hdev);
/* Get the next instance to advertise BEFORE we remove
* the current one. This can be the same instance again
* if there is only one instance.
*/
if (instance && hdev->cur_adv_instance == instance)
next_instance = hci_get_next_instance(hdev, instance);
if (instance == 0x00) {
list_for_each_entry_safe(adv_instance, n, &hdev->adv_instances,
list) {
if (!(force || adv_instance->timeout))
continue;
rem_inst = adv_instance->instance;
err = hci_remove_adv_instance(hdev, rem_inst);
if (!err)
mgmt_advertising_removed(sk, hdev, rem_inst);
}
} else {
adv_instance = hci_find_adv_instance(hdev, instance);
if (force || (adv_instance && adv_instance->timeout &&
!adv_instance->remaining_time)) {
/* Don't advertise a removed instance. */
if (next_instance &&
next_instance->instance == instance)
next_instance = NULL;
err = hci_remove_adv_instance(hdev, instance);
if (!err)
mgmt_advertising_removed(sk, hdev, instance);
}
}
if (!req || !hdev_is_powered(hdev) ||
hci_dev_test_flag(hdev, HCI_ADVERTISING))
return;
if (next_instance)
__hci_req_schedule_adv_instance(req, next_instance->instance,
false);
}
static void set_random_addr(struct hci_request *req, bdaddr_t *rpa)
{
struct hci_dev *hdev = req->hdev;
/* If we're advertising or initiating an LE connection we can't
* go ahead and change the random address at this time. This is
* because the eventual initiator address used for the
* subsequently created connection will be undefined (some
* controllers use the new address and others the one we had
* when the operation started).
*
* In this kind of scenario skip the update and let the random
* address be updated at the next cycle.
*/
if (hci_dev_test_flag(hdev, HCI_LE_ADV) ||
hci_lookup_le_connect(hdev)) {
BT_DBG("Deferring random address update");
hci_dev_set_flag(hdev, HCI_RPA_EXPIRED);
return;
}
hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6, rpa);
}
int hci_update_random_address(struct hci_request *req, bool require_privacy,
bool use_rpa, u8 *own_addr_type)
{
struct hci_dev *hdev = req->hdev;
int err;
/* If privacy is enabled use a resolvable private address. If
* current RPA has expired or there is something else than
* the current RPA in use, then generate a new one.
*/
if (use_rpa) {
int to;
*own_addr_type = ADDR_LE_DEV_RANDOM;
if (!hci_dev_test_and_clear_flag(hdev, HCI_RPA_EXPIRED) &&
!bacmp(&hdev->random_addr, &hdev->rpa))
return 0;
err = smp_generate_rpa(hdev, hdev->irk, &hdev->rpa);
if (err < 0) {
bt_dev_err(hdev, "failed to generate new RPA");
return err;
}
set_random_addr(req, &hdev->rpa);
to = msecs_to_jiffies(hdev->rpa_timeout * 1000);
queue_delayed_work(hdev->workqueue, &hdev->rpa_expired, to);
return 0;
}
/* In case of required privacy without resolvable private address,
* use an non-resolvable private address. This is useful for active
* scanning and non-connectable advertising.
*/
if (require_privacy) {
bdaddr_t nrpa;
while (true) {
/* The non-resolvable private address is generated
* from random six bytes with the two most significant
* bits cleared.
*/
get_random_bytes(&nrpa, 6);
nrpa.b[5] &= 0x3f;
/* The non-resolvable private address shall not be
* equal to the public address.
*/
if (bacmp(&hdev->bdaddr, &nrpa))
break;
}
*own_addr_type = ADDR_LE_DEV_RANDOM;
set_random_addr(req, &nrpa);
return 0;
}
/* If forcing static address is in use or there is no public
* address use the static address as random address (but skip
* the HCI command if the current random address is already the
* static one.
*
* In case BR/EDR has been disabled on a dual-mode controller
* and a static address has been configured, then use that
* address instead of the public BR/EDR address.
*/
if (hci_dev_test_flag(hdev, HCI_FORCE_STATIC_ADDR) ||
!bacmp(&hdev->bdaddr, BDADDR_ANY) ||
(!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) &&
bacmp(&hdev->static_addr, BDADDR_ANY))) {
*own_addr_type = ADDR_LE_DEV_RANDOM;
if (bacmp(&hdev->static_addr, &hdev->random_addr))
hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6,
&hdev->static_addr);
return 0;
}
/* Neither privacy nor static address is being used so use a
* public address.
*/
*own_addr_type = ADDR_LE_DEV_PUBLIC;
return 0;
}
static bool disconnected_whitelist_entries(struct hci_dev *hdev)
{
struct bdaddr_list *b;
list_for_each_entry(b, &hdev->whitelist, list) {
struct hci_conn *conn;
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &b->bdaddr);
if (!conn)
return true;
if (conn->state != BT_CONNECTED && conn->state != BT_CONFIG)
return true;
}
return false;
}
void __hci_req_update_scan(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
u8 scan;
if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
return;
if (!hdev_is_powered(hdev))
return;
if (mgmt_powering_down(hdev))
return;
if (hdev->scanning_paused)
return;
if (hci_dev_test_flag(hdev, HCI_CONNECTABLE) ||
disconnected_whitelist_entries(hdev))
scan = SCAN_PAGE;
else
scan = SCAN_DISABLED;
if (hci_dev_test_flag(hdev, HCI_DISCOVERABLE))
scan |= SCAN_INQUIRY;
if (test_bit(HCI_PSCAN, &hdev->flags) == !!(scan & SCAN_PAGE) &&
test_bit(HCI_ISCAN, &hdev->flags) == !!(scan & SCAN_INQUIRY))
return;
hci_req_add(req, HCI_OP_WRITE_SCAN_ENABLE, 1, &scan);
}
static int update_scan(struct hci_request *req, unsigned long opt)
{
hci_dev_lock(req->hdev);
__hci_req_update_scan(req);
hci_dev_unlock(req->hdev);
return 0;
}
static void scan_update_work(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev, scan_update);
hci_req_sync(hdev, update_scan, 0, HCI_CMD_TIMEOUT, NULL);
}
static int connectable_update(struct hci_request *req, unsigned long opt)
{
struct hci_dev *hdev = req->hdev;
hci_dev_lock(hdev);
__hci_req_update_scan(req);
/* If BR/EDR is not enabled and we disable advertising as a
* by-product of disabling connectable, we need to update the
* advertising flags.
*/
if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
__hci_req_update_adv_data(req, hdev->cur_adv_instance);
/* Update the advertising parameters if necessary */
if (hci_dev_test_flag(hdev, HCI_ADVERTISING) ||
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
!list_empty(&hdev->adv_instances)) {
if (ext_adv_capable(hdev))
__hci_req_start_ext_adv(req, hdev->cur_adv_instance);
else
__hci_req_enable_advertising(req);
}
__hci_update_background_scan(req);
hci_dev_unlock(hdev);
return 0;
}
static void connectable_update_work(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev,
connectable_update);
u8 status;
hci_req_sync(hdev, connectable_update, 0, HCI_CMD_TIMEOUT, &status);
mgmt_set_connectable_complete(hdev, status);
}
static u8 get_service_classes(struct hci_dev *hdev)
{
struct bt_uuid *uuid;
u8 val = 0;
list_for_each_entry(uuid, &hdev->uuids, list)
val |= uuid->svc_hint;
return val;
}
void __hci_req_update_class(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
u8 cod[3];
BT_DBG("%s", hdev->name);
if (!hdev_is_powered(hdev))
return;
if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
return;
if (hci_dev_test_flag(hdev, HCI_SERVICE_CACHE))
return;
cod[0] = hdev->minor_class;
cod[1] = hdev->major_class;
cod[2] = get_service_classes(hdev);
if (hci_dev_test_flag(hdev, HCI_LIMITED_DISCOVERABLE))
cod[1] |= 0x20;
if (memcmp(cod, hdev->dev_class, 3) == 0)
return;
hci_req_add(req, HCI_OP_WRITE_CLASS_OF_DEV, sizeof(cod), cod);
}
static void write_iac(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
struct hci_cp_write_current_iac_lap cp;
if (!hci_dev_test_flag(hdev, HCI_DISCOVERABLE))
return;
if (hci_dev_test_flag(hdev, HCI_LIMITED_DISCOVERABLE)) {
/* Limited discoverable mode */
cp.num_iac = min_t(u8, hdev->num_iac, 2);
cp.iac_lap[0] = 0x00; /* LIAC */
cp.iac_lap[1] = 0x8b;
cp.iac_lap[2] = 0x9e;
cp.iac_lap[3] = 0x33; /* GIAC */
cp.iac_lap[4] = 0x8b;
cp.iac_lap[5] = 0x9e;
} else {
/* General discoverable mode */
cp.num_iac = 1;
cp.iac_lap[0] = 0x33; /* GIAC */
cp.iac_lap[1] = 0x8b;
cp.iac_lap[2] = 0x9e;
}
hci_req_add(req, HCI_OP_WRITE_CURRENT_IAC_LAP,
(cp.num_iac * 3) + 1, &cp);
}
static int discoverable_update(struct hci_request *req, unsigned long opt)
{
struct hci_dev *hdev = req->hdev;
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
write_iac(req);
__hci_req_update_scan(req);
__hci_req_update_class(req);
}
/* Advertising instances don't use the global discoverable setting, so
* only update AD if advertising was enabled using Set Advertising.
*/
if (hci_dev_test_flag(hdev, HCI_ADVERTISING)) {
__hci_req_update_adv_data(req, 0x00);
/* Discoverable mode affects the local advertising
* address in limited privacy mode.
*/
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
if (hci_dev_test_flag(hdev, HCI_LIMITED_PRIVACY)) {
if (ext_adv_capable(hdev))
__hci_req_start_ext_adv(req, 0x00);
else
__hci_req_enable_advertising(req);
}
}
hci_dev_unlock(hdev);
return 0;
}
static void discoverable_update_work(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev,
discoverable_update);
u8 status;
hci_req_sync(hdev, discoverable_update, 0, HCI_CMD_TIMEOUT, &status);
mgmt_set_discoverable_complete(hdev, status);
}
void __hci_abort_conn(struct hci_request *req, struct hci_conn *conn,
u8 reason)
{
switch (conn->state) {
case BT_CONNECTED:
case BT_CONFIG:
if (conn->type == AMP_LINK) {
struct hci_cp_disconn_phy_link cp;
cp.phy_handle = HCI_PHY_HANDLE(conn->handle);
cp.reason = reason;
hci_req_add(req, HCI_OP_DISCONN_PHY_LINK, sizeof(cp),
&cp);
} else {
struct hci_cp_disconnect dc;
dc.handle = cpu_to_le16(conn->handle);
dc.reason = reason;
hci_req_add(req, HCI_OP_DISCONNECT, sizeof(dc), &dc);
}
conn->state = BT_DISCONN;
break;
case BT_CONNECT:
if (conn->type == LE_LINK) {
if (test_bit(HCI_CONN_SCANNING, &conn->flags))
break;
hci_req_add(req, HCI_OP_LE_CREATE_CONN_CANCEL,
0, NULL);
} else if (conn->type == ACL_LINK) {
if (req->hdev->hci_ver < BLUETOOTH_VER_1_2)
break;
hci_req_add(req, HCI_OP_CREATE_CONN_CANCEL,
6, &conn->dst);
}
break;
case BT_CONNECT2:
if (conn->type == ACL_LINK) {
struct hci_cp_reject_conn_req rej;
bacpy(&rej.bdaddr, &conn->dst);
rej.reason = reason;
hci_req_add(req, HCI_OP_REJECT_CONN_REQ,
sizeof(rej), &rej);
} else if (conn->type == SCO_LINK || conn->type == ESCO_LINK) {
struct hci_cp_reject_sync_conn_req rej;
bacpy(&rej.bdaddr, &conn->dst);
/* SCO rejection has its own limited set of
* allowed error values (0x0D-0x0F) which isn't
* compatible with most values passed to this
* function. To be safe hard-code one of the
* values that's suitable for SCO.
*/
rej.reason = HCI_ERROR_REJ_LIMITED_RESOURCES;
hci_req_add(req, HCI_OP_REJECT_SYNC_CONN_REQ,
sizeof(rej), &rej);
}
break;
default:
conn->state = BT_CLOSED;
break;
}
}
static void abort_conn_complete(struct hci_dev *hdev, u8 status, u16 opcode)
{
if (status)
BT_DBG("Failed to abort connection: status 0x%2.2x", status);
}
int hci_abort_conn(struct hci_conn *conn, u8 reason)
{
struct hci_request req;
int err;
hci_req_init(&req, conn->hdev);
__hci_abort_conn(&req, conn, reason);
err = hci_req_run(&req, abort_conn_complete);
if (err && err != -ENODATA) {
bt_dev_err(conn->hdev, "failed to run HCI request: err %d", err);
return err;
}
return 0;
}
static int update_bg_scan(struct hci_request *req, unsigned long opt)
{
hci_dev_lock(req->hdev);
__hci_update_background_scan(req);
hci_dev_unlock(req->hdev);
return 0;
}
static void bg_scan_update(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev,
bg_scan_update);
struct hci_conn *conn;
u8 status;
int err;
err = hci_req_sync(hdev, update_bg_scan, 0, HCI_CMD_TIMEOUT, &status);
if (!err)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
if (conn)
hci_le_conn_failed(conn, status);
hci_dev_unlock(hdev);
}
static int le_scan_disable(struct hci_request *req, unsigned long opt)
{
hci_req_add_le_scan_disable(req);
return 0;
}
static int bredr_inquiry(struct hci_request *req, unsigned long opt)
{
u8 length = opt;
const u8 giac[3] = { 0x33, 0x8b, 0x9e };
const u8 liac[3] = { 0x00, 0x8b, 0x9e };
struct hci_cp_inquiry cp;
BT_DBG("%s", req->hdev->name);
hci_dev_lock(req->hdev);
hci_inquiry_cache_flush(req->hdev);
hci_dev_unlock(req->hdev);
memset(&cp, 0, sizeof(cp));
if (req->hdev->discovery.limited)
memcpy(&cp.lap, liac, sizeof(cp.lap));
else
memcpy(&cp.lap, giac, sizeof(cp.lap));
cp.length = length;
hci_req_add(req, HCI_OP_INQUIRY, sizeof(cp), &cp);
return 0;
}
static void le_scan_disable_work(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev,
le_scan_disable.work);
u8 status;
BT_DBG("%s", hdev->name);
if (!hci_dev_test_flag(hdev, HCI_LE_SCAN))
return;
cancel_delayed_work(&hdev->le_scan_restart);
hci_req_sync(hdev, le_scan_disable, 0, HCI_CMD_TIMEOUT, &status);
if (status) {
bt_dev_err(hdev, "failed to disable LE scan: status 0x%02x",
status);
return;
}
hdev->discovery.scan_start = 0;
/* If we were running LE only scan, change discovery state. If
* we were running both LE and BR/EDR inquiry simultaneously,
* and BR/EDR inquiry is already finished, stop discovery,
* otherwise BR/EDR inquiry will stop discovery when finished.
* If we will resolve remote device name, do not change
* discovery state.
*/
if (hdev->discovery.type == DISCOV_TYPE_LE)
goto discov_stopped;
if (hdev->discovery.type != DISCOV_TYPE_INTERLEAVED)
return;
if (test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks)) {
if (!test_bit(HCI_INQUIRY, &hdev->flags) &&
hdev->discovery.state != DISCOVERY_RESOLVING)
goto discov_stopped;
return;
}
hci_req_sync(hdev, bredr_inquiry, DISCOV_INTERLEAVED_INQUIRY_LEN,
HCI_CMD_TIMEOUT, &status);
if (status) {
bt_dev_err(hdev, "inquiry failed: status 0x%02x", status);
goto discov_stopped;
}
return;
discov_stopped:
hci_dev_lock(hdev);
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
hci_dev_unlock(hdev);
}
static int le_scan_restart(struct hci_request *req, unsigned long opt)
{
struct hci_dev *hdev = req->hdev;
/* If controller is not scanning we are done. */
if (!hci_dev_test_flag(hdev, HCI_LE_SCAN))
return 0;
hci_req_add_le_scan_disable(req);
if (use_ext_scan(hdev)) {
struct hci_cp_le_set_ext_scan_enable ext_enable_cp;
memset(&ext_enable_cp, 0, sizeof(ext_enable_cp));
ext_enable_cp.enable = LE_SCAN_ENABLE;
ext_enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE,
sizeof(ext_enable_cp), &ext_enable_cp);
} else {
struct hci_cp_le_set_scan_enable cp;
memset(&cp, 0, sizeof(cp));
cp.enable = LE_SCAN_ENABLE;
cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
}
return 0;
}
static void le_scan_restart_work(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev,
le_scan_restart.work);
unsigned long timeout, duration, scan_start, now;
u8 status;
BT_DBG("%s", hdev->name);
hci_req_sync(hdev, le_scan_restart, 0, HCI_CMD_TIMEOUT, &status);
if (status) {
bt_dev_err(hdev, "failed to restart LE scan: status %d",
status);
return;
}
hci_dev_lock(hdev);
if (!test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks) ||
!hdev->discovery.scan_start)
goto unlock;
/* When the scan was started, hdev->le_scan_disable has been queued
* after duration from scan_start. During scan restart this job
* has been canceled, and we need to queue it again after proper
* timeout, to make sure that scan does not run indefinitely.
*/
duration = hdev->discovery.scan_duration;
scan_start = hdev->discovery.scan_start;
now = jiffies;
if (now - scan_start <= duration) {
int elapsed;
if (now >= scan_start)
elapsed = now - scan_start;
else
elapsed = ULONG_MAX - scan_start + now;
timeout = duration - elapsed;
} else {
timeout = 0;
}
queue_delayed_work(hdev->req_workqueue,
&hdev->le_scan_disable, timeout);
unlock:
hci_dev_unlock(hdev);
}
static int active_scan(struct hci_request *req, unsigned long opt)
{
uint16_t interval = opt;
struct hci_dev *hdev = req->hdev;
u8 own_addr_type;
int err;
BT_DBG("%s", hdev->name);
/* If controller is scanning, it means the background scanning is
* running. Thus, we should temporarily stop it in order to set the
* discovery scanning parameters.
*/
if (hci_dev_test_flag(hdev, HCI_LE_SCAN))
hci_req_add_le_scan_disable(req);
/* All active scans will be done with either a resolvable private
* address (when privacy feature has been enabled) or non-resolvable
* private address.
*/
err = hci_update_random_address(req, true, scan_use_rpa(hdev),
&own_addr_type);
if (err < 0)
own_addr_type = ADDR_LE_DEV_PUBLIC;
hci_req_start_scan(req, LE_SCAN_ACTIVE, interval, DISCOV_LE_SCAN_WIN,
own_addr_type, 0);
return 0;
}
static int interleaved_discov(struct hci_request *req, unsigned long opt)
{
int err;
BT_DBG("%s", req->hdev->name);
err = active_scan(req, opt);
if (err)
return err;
return bredr_inquiry(req, DISCOV_BREDR_INQUIRY_LEN);
}
static void start_discovery(struct hci_dev *hdev, u8 *status)
{
unsigned long timeout;
BT_DBG("%s type %u", hdev->name, hdev->discovery.type);
switch (hdev->discovery.type) {
case DISCOV_TYPE_BREDR:
if (!hci_dev_test_flag(hdev, HCI_INQUIRY))
hci_req_sync(hdev, bredr_inquiry,
DISCOV_BREDR_INQUIRY_LEN, HCI_CMD_TIMEOUT,
status);
return;
case DISCOV_TYPE_INTERLEAVED:
/* When running simultaneous discovery, the LE scanning time
* should occupy the whole discovery time sine BR/EDR inquiry
* and LE scanning are scheduled by the controller.
*
* For interleaving discovery in comparison, BR/EDR inquiry
* and LE scanning are done sequentially with separate
* timeouts.
*/
if (test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY,
&hdev->quirks)) {
timeout = msecs_to_jiffies(DISCOV_LE_TIMEOUT);
/* During simultaneous discovery, we double LE scan
* interval. We must leave some time for the controller
* to do BR/EDR inquiry.
*/
hci_req_sync(hdev, interleaved_discov,
DISCOV_LE_SCAN_INT * 2, HCI_CMD_TIMEOUT,
status);
break;
}
timeout = msecs_to_jiffies(hdev->discov_interleaved_timeout);
hci_req_sync(hdev, active_scan, DISCOV_LE_SCAN_INT,
HCI_CMD_TIMEOUT, status);
break;
case DISCOV_TYPE_LE:
timeout = msecs_to_jiffies(DISCOV_LE_TIMEOUT);
hci_req_sync(hdev, active_scan, DISCOV_LE_SCAN_INT,
HCI_CMD_TIMEOUT, status);
break;
default:
*status = HCI_ERROR_UNSPECIFIED;
return;
}
if (*status)
return;
BT_DBG("%s timeout %u ms", hdev->name, jiffies_to_msecs(timeout));
/* When service discovery is used and the controller has a
* strict duplicate filter, it is important to remember the
* start and duration of the scan. This is required for
* restarting scanning during the discovery phase.
*/
if (test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks) &&
hdev->discovery.result_filtering) {
hdev->discovery.scan_start = jiffies;
hdev->discovery.scan_duration = timeout;
}
queue_delayed_work(hdev->req_workqueue, &hdev->le_scan_disable,
timeout);
}
bool hci_req_stop_discovery(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
struct discovery_state *d = &hdev->discovery;
struct hci_cp_remote_name_req_cancel cp;
struct inquiry_entry *e;
bool ret = false;
BT_DBG("%s state %u", hdev->name, hdev->discovery.state);
if (d->state == DISCOVERY_FINDING || d->state == DISCOVERY_STOPPING) {
if (test_bit(HCI_INQUIRY, &hdev->flags))
hci_req_add(req, HCI_OP_INQUIRY_CANCEL, 0, NULL);
if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
cancel_delayed_work(&hdev->le_scan_disable);
hci_req_add_le_scan_disable(req);
}
ret = true;
} else {
/* Passive scanning */
if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
hci_req_add_le_scan_disable(req);
ret = true;
}
}
/* No further actions needed for LE-only discovery */
if (d->type == DISCOV_TYPE_LE)
return ret;
if (d->state == DISCOVERY_RESOLVING || d->state == DISCOVERY_STOPPING) {
e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY,
NAME_PENDING);
if (!e)
return ret;
bacpy(&cp.bdaddr, &e->data.bdaddr);
hci_req_add(req, HCI_OP_REMOTE_NAME_REQ_CANCEL, sizeof(cp),
&cp);
ret = true;
}
return ret;
}
static int stop_discovery(struct hci_request *req, unsigned long opt)
{
hci_dev_lock(req->hdev);
hci_req_stop_discovery(req);
hci_dev_unlock(req->hdev);
return 0;
}
static void discov_update(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev,
discov_update);
u8 status = 0;
switch (hdev->discovery.state) {
case DISCOVERY_STARTING:
start_discovery(hdev, &status);
mgmt_start_discovery_complete(hdev, status);
if (status)
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
else
hci_discovery_set_state(hdev, DISCOVERY_FINDING);
break;
case DISCOVERY_STOPPING:
hci_req_sync(hdev, stop_discovery, 0, HCI_CMD_TIMEOUT, &status);
mgmt_stop_discovery_complete(hdev, status);
if (!status)
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
break;
case DISCOVERY_STOPPED:
default:
return;
}
}
static void discov_off(struct work_struct *work)
{
struct hci_dev *hdev = container_of(work, struct hci_dev,
discov_off.work);
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
/* When discoverable timeout triggers, then just make sure
* the limited discoverable flag is cleared. Even in the case
* of a timeout triggered from general discoverable, it is
* safe to unconditionally clear the flag.
*/
hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE);
hci_dev_clear_flag(hdev, HCI_DISCOVERABLE);
hdev->discov_timeout = 0;
hci_dev_unlock(hdev);
hci_req_sync(hdev, discoverable_update, 0, HCI_CMD_TIMEOUT, NULL);
mgmt_new_settings(hdev);
}
static int powered_update_hci(struct hci_request *req, unsigned long opt)
{
struct hci_dev *hdev = req->hdev;
u8 link_sec;
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED) &&
!lmp_host_ssp_capable(hdev)) {
u8 mode = 0x01;
hci_req_add(req, HCI_OP_WRITE_SSP_MODE, sizeof(mode), &mode);
if (bredr_sc_enabled(hdev) && !lmp_host_sc_capable(hdev)) {
u8 support = 0x01;
hci_req_add(req, HCI_OP_WRITE_SC_SUPPORT,
sizeof(support), &support);
}
}
if (hci_dev_test_flag(hdev, HCI_LE_ENABLED) &&
lmp_bredr_capable(hdev)) {
struct hci_cp_write_le_host_supported cp;
cp.le = 0x01;
cp.simul = 0x00;
/* Check first if we already have the right
* host state (host features set)
*/
if (cp.le != lmp_host_le_capable(hdev) ||
cp.simul != lmp_host_le_br_capable(hdev))
hci_req_add(req, HCI_OP_WRITE_LE_HOST_SUPPORTED,
sizeof(cp), &cp);
}
if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
/* Make sure the controller has a good default for
* advertising data. This also applies to the case
* where BR/EDR was toggled during the AUTO_OFF phase.
*/
if (hci_dev_test_flag(hdev, HCI_ADVERTISING) ||
list_empty(&hdev->adv_instances)) {
int err;
if (ext_adv_capable(hdev)) {
err = __hci_req_setup_ext_adv_instance(req,
0x00);
if (!err)
__hci_req_update_scan_rsp_data(req,
0x00);
} else {
err = 0;
__hci_req_update_adv_data(req, 0x00);
__hci_req_update_scan_rsp_data(req, 0x00);
}
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
if (hci_dev_test_flag(hdev, HCI_ADVERTISING)) {
if (!ext_adv_capable(hdev))
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
__hci_req_enable_advertising(req);
else if (!err)
__hci_req_enable_ext_advertising(req,
0x00);
Bluetooth: Impmlement extended adv enable This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-19 18:39:41 +07:00
}
} else if (!list_empty(&hdev->adv_instances)) {
struct adv_info *adv_instance;
adv_instance = list_first_entry(&hdev->adv_instances,
struct adv_info, list);
__hci_req_schedule_adv_instance(req,
adv_instance->instance,
true);
}
}
link_sec = hci_dev_test_flag(hdev, HCI_LINK_SECURITY);
if (link_sec != test_bit(HCI_AUTH, &hdev->flags))
hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE,
sizeof(link_sec), &link_sec);
if (lmp_bredr_capable(hdev)) {
if (hci_dev_test_flag(hdev, HCI_FAST_CONNECTABLE))
__hci_req_write_fast_connectable(req, true);
else
__hci_req_write_fast_connectable(req, false);
__hci_req_update_scan(req);
__hci_req_update_class(req);
__hci_req_update_name(req);
__hci_req_update_eir(req);
}
hci_dev_unlock(hdev);
return 0;
}
int __hci_req_hci_power_on(struct hci_dev *hdev)
{
/* Register the available SMP channels (BR/EDR and LE) only when
* successfully powering on the controller. This late
* registration is required so that LE SMP can clearly decide if
* the public address or static address is used.
*/
smp_register(hdev);
return __hci_req_sync(hdev, powered_update_hci, 0, HCI_CMD_TIMEOUT,
NULL);
}
void hci_request_setup(struct hci_dev *hdev)
{
INIT_WORK(&hdev->discov_update, discov_update);
INIT_WORK(&hdev->bg_scan_update, bg_scan_update);
INIT_WORK(&hdev->scan_update, scan_update_work);
INIT_WORK(&hdev->connectable_update, connectable_update_work);
INIT_WORK(&hdev->discoverable_update, discoverable_update_work);
INIT_DELAYED_WORK(&hdev->discov_off, discov_off);
INIT_DELAYED_WORK(&hdev->le_scan_disable, le_scan_disable_work);
INIT_DELAYED_WORK(&hdev->le_scan_restart, le_scan_restart_work);
INIT_DELAYED_WORK(&hdev->adv_instance_expire, adv_timeout_expire);
}
void hci_request_cancel_all(struct hci_dev *hdev)
{
hci_req_sync_cancel(hdev, ENODEV);
cancel_work_sync(&hdev->discov_update);
cancel_work_sync(&hdev->bg_scan_update);
cancel_work_sync(&hdev->scan_update);
cancel_work_sync(&hdev->connectable_update);
cancel_work_sync(&hdev->discoverable_update);
cancel_delayed_work_sync(&hdev->discov_off);
cancel_delayed_work_sync(&hdev->le_scan_disable);
cancel_delayed_work_sync(&hdev->le_scan_restart);
if (hdev->adv_instance_timeout) {
cancel_delayed_work_sync(&hdev->adv_instance_expire);
hdev->adv_instance_timeout = 0;
}
}