2006-10-03 08:10:10 +07:00
|
|
|
/*
|
|
|
|
|
* MPC8360E EMDS Device Tree Source
|
|
|
|
|
*
|
|
|
|
|
* Copyright 2006 Freescale Semiconductor Inc.
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
|
* option) any later version.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
/memreserve/ 00000000 1000000;
|
|
|
|
|
*/
|
|
|
|
|
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
/dts-v1/;
|
|
|
|
|
|
2006-10-03 08:10:10 +07:00
|
|
|
/ {
|
2007-02-16 22:57:22 +07:00
|
|
|
model = "MPC8360MDS";
|
|
|
|
|
compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
|
2006-10-03 08:10:10 +07:00
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
2007-12-12 14:46:12 +07:00
|
|
|
aliases {
|
|
|
|
|
ethernet0 = &enet0;
|
|
|
|
|
ethernet1 = &enet1;
|
|
|
|
|
serial0 = &serial0;
|
|
|
|
|
serial1 = &serial1;
|
|
|
|
|
pci0 = &pci0;
|
|
|
|
|
};
|
|
|
|
|
|
2006-10-03 08:10:10 +07:00
|
|
|
cpus {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
PowerPC,8360@0 {
|
|
|
|
|
device_type = "cpu";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x0>;
|
|
|
|
|
d-cache-line-size = <32>; // 32 bytes
|
|
|
|
|
i-cache-line-size = <32>; // 32 bytes
|
|
|
|
|
d-cache-size = <32768>; // L1, 32K
|
|
|
|
|
i-cache-size = <32768>; // L1, 32K
|
|
|
|
|
timebase-frequency = <66000000>;
|
|
|
|
|
bus-frequency = <264000000>;
|
|
|
|
|
clock-frequency = <528000000>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
memory {
|
|
|
|
|
device_type = "memory";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x00000000 0x10000000>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
2008-08-15 00:13:42 +07:00
|
|
|
localbus@e0005000 {
|
|
|
|
|
#address-cells = <2>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
|
|
|
|
|
"simple-bus";
|
|
|
|
|
reg = <0xe0005000 0xd8>;
|
|
|
|
|
ranges = <0 0 0xfe000000 0x02000000
|
|
|
|
|
1 0 0xf8000000 0x00008000>;
|
|
|
|
|
|
|
|
|
|
flash@0,0 {
|
|
|
|
|
compatible = "cfi-flash";
|
|
|
|
|
reg = <0 0 0x2000000>;
|
|
|
|
|
bank-width = <2>;
|
|
|
|
|
device-width = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
bcsr@1,0 {
|
2008-12-18 23:37:31 +07:00
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
2008-10-18 07:23:52 +07:00
|
|
|
compatible = "fsl,mpc8360mds-bcsr";
|
2008-08-15 00:13:42 +07:00
|
|
|
reg = <1 0 0x8000>;
|
2008-12-18 23:37:31 +07:00
|
|
|
ranges = <0 1 0 0x8000>;
|
|
|
|
|
|
|
|
|
|
bcsr13: gpio-controller@d {
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
compatible = "fsl,mpc8360mds-bcsr-gpio";
|
|
|
|
|
reg = <0xd 1>;
|
|
|
|
|
gpio-controller;
|
|
|
|
|
};
|
2008-08-15 00:13:42 +07:00
|
|
|
};
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
soc8360@e0000000 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
device_type = "soc";
|
2008-07-30 03:29:24 +07:00
|
|
|
compatible = "simple-bus";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
|
|
|
|
reg = <0xe0000000 0x00000200>;
|
|
|
|
|
bus-frequency = <264000000>;
|
2006-10-03 08:10:10 +07:00
|
|
|
|
|
|
|
|
wdt@200 {
|
|
|
|
|
device_type = "watchdog";
|
|
|
|
|
compatible = "mpc83xx_wdt";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x200 0x100>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
2009-09-16 04:44:02 +07:00
|
|
|
pmc: power@b00 {
|
|
|
|
|
compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
|
|
|
|
|
reg = <0xb00 0x100 0xa00 0x100>;
|
|
|
|
|
interrupts = <80 0x8>;
|
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
};
|
|
|
|
|
|
2006-10-03 08:10:10 +07:00
|
|
|
i2c@3000 {
|
2007-11-09 02:37:06 +07:00
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
2007-12-12 12:17:24 +07:00
|
|
|
cell-index = <0>;
|
2006-10-03 08:10:10 +07:00
|
|
|
compatible = "fsl-i2c";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x3000 0x100>;
|
|
|
|
|
interrupts = <14 0x8>;
|
|
|
|
|
interrupt-parent = <&ipic>;
|
2006-10-03 08:10:10 +07:00
|
|
|
dfsrr;
|
2007-11-09 02:37:06 +07:00
|
|
|
|
|
|
|
|
rtc@68 {
|
|
|
|
|
compatible = "dallas,ds1374";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x68>;
|
2007-11-09 02:37:06 +07:00
|
|
|
};
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c@3100 {
|
2007-11-09 02:37:06 +07:00
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
2007-12-12 12:17:24 +07:00
|
|
|
cell-index = <1>;
|
2006-10-03 08:10:10 +07:00
|
|
|
compatible = "fsl-i2c";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x3100 0x100>;
|
|
|
|
|
interrupts = <15 0x8>;
|
|
|
|
|
interrupt-parent = <&ipic>;
|
2006-10-03 08:10:10 +07:00
|
|
|
dfsrr;
|
|
|
|
|
};
|
|
|
|
|
|
2007-12-12 14:46:12 +07:00
|
|
|
serial0: serial@4500 {
|
|
|
|
|
cell-index = <0>;
|
2006-10-03 08:10:10 +07:00
|
|
|
device_type = "serial";
|
2011-11-29 02:58:53 +07:00
|
|
|
compatible = "fsl,ns16550", "ns16550";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x4500 0x100>;
|
|
|
|
|
clock-frequency = <264000000>;
|
|
|
|
|
interrupts = <9 0x8>;
|
|
|
|
|
interrupt-parent = <&ipic>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
2007-12-12 14:46:12 +07:00
|
|
|
serial1: serial@4600 {
|
|
|
|
|
cell-index = <1>;
|
2006-10-03 08:10:10 +07:00
|
|
|
device_type = "serial";
|
2011-11-29 02:58:53 +07:00
|
|
|
compatible = "fsl,ns16550", "ns16550";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x4600 0x100>;
|
|
|
|
|
clock-frequency = <264000000>;
|
|
|
|
|
interrupts = <10 0x8>;
|
|
|
|
|
interrupt-parent = <&ipic>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
2008-06-28 01:45:19 +07:00
|
|
|
dma@82a8 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
|
|
|
|
|
reg = <0x82a8 4>;
|
|
|
|
|
ranges = <0 0x8100 0x1a8>;
|
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
cell-index = <0>;
|
|
|
|
|
dma-channel@0 {
|
|
|
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
|
reg = <0 0x80>;
|
2008-09-24 10:05:10 +07:00
|
|
|
cell-index = <0>;
|
2008-06-28 01:45:19 +07:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
};
|
|
|
|
|
dma-channel@80 {
|
|
|
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
|
reg = <0x80 0x80>;
|
2008-09-24 10:05:10 +07:00
|
|
|
cell-index = <1>;
|
2008-06-28 01:45:19 +07:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
};
|
|
|
|
|
dma-channel@100 {
|
|
|
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
|
reg = <0x100 0x80>;
|
2008-09-24 10:05:10 +07:00
|
|
|
cell-index = <2>;
|
2008-06-28 01:45:19 +07:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
};
|
|
|
|
|
dma-channel@180 {
|
|
|
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
|
reg = <0x180 0x28>;
|
2008-09-24 10:05:10 +07:00
|
|
|
cell-index = <3>;
|
2008-06-28 01:45:19 +07:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2006-10-03 08:10:10 +07:00
|
|
|
crypto@30000 {
|
2008-07-09 07:13:33 +07:00
|
|
|
compatible = "fsl,sec2.0";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x30000 0x10000>;
|
|
|
|
|
interrupts = <11 0x8>;
|
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-07-09 07:13:33 +07:00
|
|
|
fsl,num-channels = <4>;
|
|
|
|
|
fsl,channel-fifo-len = <24>;
|
|
|
|
|
fsl,exec-units-mask = <0x7e>;
|
|
|
|
|
fsl,descriptor-types-mask = <0x01010ebf>;
|
2009-09-16 04:44:02 +07:00
|
|
|
sleep = <&pmc 0x03000000>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
2007-02-16 22:57:22 +07:00
|
|
|
ipic: pic@700 {
|
2006-10-03 08:10:10 +07:00
|
|
|
interrupt-controller;
|
|
|
|
|
#address-cells = <0>;
|
|
|
|
|
#interrupt-cells = <2>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x700 0x100>;
|
2006-10-03 08:10:10 +07:00
|
|
|
device_type = "ipic";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
par_io@1400 {
|
2008-12-18 23:37:31 +07:00
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x1400 0x100>;
|
2008-12-18 23:37:31 +07:00
|
|
|
ranges = <0 0x1400 0x100>;
|
2006-10-03 08:10:10 +07:00
|
|
|
device_type = "par_io";
|
|
|
|
|
num-ports = <7>;
|
|
|
|
|
|
2008-12-18 23:37:31 +07:00
|
|
|
qe_pio_b: gpio-controller@18 {
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
compatible = "fsl,mpc8360-qe-pario-bank",
|
|
|
|
|
"fsl,mpc8323-qe-pario-bank";
|
|
|
|
|
reg = <0x18 0x18>;
|
|
|
|
|
gpio-controller;
|
|
|
|
|
};
|
|
|
|
|
|
2007-02-16 22:57:22 +07:00
|
|
|
pio1: ucc_pin@01 {
|
2006-10-03 08:10:10 +07:00
|
|
|
pio-map = <
|
|
|
|
|
/* port pin dir open_drain assignment has_irq */
|
|
|
|
|
0 3 1 0 1 0 /* TxD0 */
|
|
|
|
|
0 4 1 0 1 0 /* TxD1 */
|
|
|
|
|
0 5 1 0 1 0 /* TxD2 */
|
|
|
|
|
0 6 1 0 1 0 /* TxD3 */
|
|
|
|
|
1 6 1 0 3 0 /* TxD4 */
|
|
|
|
|
1 7 1 0 1 0 /* TxD5 */
|
|
|
|
|
1 9 1 0 2 0 /* TxD6 */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
1 10 1 0 2 0 /* TxD7 */
|
2006-10-03 08:10:10 +07:00
|
|
|
0 9 2 0 1 0 /* RxD0 */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0 10 2 0 1 0 /* RxD1 */
|
|
|
|
|
0 11 2 0 1 0 /* RxD2 */
|
|
|
|
|
0 12 2 0 1 0 /* RxD3 */
|
|
|
|
|
0 13 2 0 1 0 /* RxD4 */
|
2006-10-03 08:10:10 +07:00
|
|
|
1 1 2 0 2 0 /* RxD5 */
|
|
|
|
|
1 0 2 0 2 0 /* RxD6 */
|
|
|
|
|
1 4 2 0 2 0 /* RxD7 */
|
|
|
|
|
0 7 1 0 1 0 /* TX_EN */
|
|
|
|
|
0 8 1 0 1 0 /* TX_ER */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0 15 2 0 1 0 /* RX_DV */
|
|
|
|
|
0 16 2 0 1 0 /* RX_ER */
|
2006-10-03 08:10:10 +07:00
|
|
|
0 0 2 0 1 0 /* RX_CLK */
|
|
|
|
|
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
|
|
|
|
|
2 8 2 0 1 0>; /* GTX125 - CLK9 */
|
|
|
|
|
};
|
2007-02-16 22:57:22 +07:00
|
|
|
pio2: ucc_pin@02 {
|
2006-10-03 08:10:10 +07:00
|
|
|
pio-map = <
|
|
|
|
|
/* port pin dir open_drain assignment has_irq */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0 17 1 0 1 0 /* TxD0 */
|
|
|
|
|
0 18 1 0 1 0 /* TxD1 */
|
|
|
|
|
0 19 1 0 1 0 /* TxD2 */
|
|
|
|
|
0 20 1 0 1 0 /* TxD3 */
|
2006-10-03 08:10:10 +07:00
|
|
|
1 2 1 0 1 0 /* TxD4 */
|
|
|
|
|
1 3 1 0 2 0 /* TxD5 */
|
|
|
|
|
1 5 1 0 3 0 /* TxD6 */
|
|
|
|
|
1 8 1 0 3 0 /* TxD7 */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0 23 2 0 1 0 /* RxD0 */
|
|
|
|
|
0 24 2 0 1 0 /* RxD1 */
|
|
|
|
|
0 25 2 0 1 0 /* RxD2 */
|
|
|
|
|
0 26 2 0 1 0 /* RxD3 */
|
|
|
|
|
0 27 2 0 1 0 /* RxD4 */
|
|
|
|
|
1 12 2 0 2 0 /* RxD5 */
|
|
|
|
|
1 13 2 0 3 0 /* RxD6 */
|
|
|
|
|
1 11 2 0 2 0 /* RxD7 */
|
|
|
|
|
0 21 1 0 1 0 /* TX_EN */
|
|
|
|
|
0 22 1 0 1 0 /* TX_ER */
|
|
|
|
|
0 29 2 0 1 0 /* RX_DV */
|
|
|
|
|
0 30 2 0 1 0 /* RX_ER */
|
|
|
|
|
0 31 2 0 1 0 /* RX_CLK */
|
2006-10-03 08:10:10 +07:00
|
|
|
2 2 1 0 2 0 /* GTX_CLK - CLK10 */
|
|
|
|
|
2 3 2 0 1 0 /* GTX125 - CLK4 */
|
|
|
|
|
0 1 3 0 2 0 /* MDIO */
|
|
|
|
|
0 2 1 0 1 0>; /* MDC */
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
qe@e0100000 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
device_type = "qe";
|
2008-01-24 22:39:59 +07:00
|
|
|
compatible = "fsl,qe";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
ranges = <0x0 0xe0100000 0x00100000>;
|
|
|
|
|
reg = <0xe0100000 0x480>;
|
2006-10-03 08:10:10 +07:00
|
|
|
brg-frequency = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
bus-frequency = <396000000>;
|
2009-05-02 02:40:51 +07:00
|
|
|
fsl,qe-num-riscs = <2>;
|
|
|
|
|
fsl,qe-num-snums = <28>;
|
2006-10-03 08:10:10 +07:00
|
|
|
|
|
|
|
|
muram@10000 {
|
2008-01-28 14:27:51 +07:00
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
2008-01-24 22:39:59 +07:00
|
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
ranges = <0x0 0x00010000 0x0000c000>;
|
2006-10-03 08:10:10 +07:00
|
|
|
|
2008-01-28 14:27:51 +07:00
|
|
|
data-only@0 {
|
2008-01-24 22:39:59 +07:00
|
|
|
compatible = "fsl,qe-muram-data",
|
|
|
|
|
"fsl,cpm-muram-data";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x0 0xc000>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2008-12-18 23:37:31 +07:00
|
|
|
timer@440 {
|
|
|
|
|
compatible = "fsl,mpc8360-qe-gtm",
|
|
|
|
|
"fsl,qe-gtm", "fsl,gtm";
|
|
|
|
|
reg = <0x440 0x40>;
|
|
|
|
|
clock-frequency = <132000000>;
|
|
|
|
|
interrupts = <12 13 14 15>;
|
|
|
|
|
interrupt-parent = <&qeic>;
|
|
|
|
|
};
|
|
|
|
|
|
2006-10-03 08:10:10 +07:00
|
|
|
spi@4c0 {
|
2008-01-24 22:40:07 +07:00
|
|
|
cell-index = <0>;
|
|
|
|
|
compatible = "fsl,spi";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x4c0 0x40>;
|
2006-10-03 08:10:10 +07:00
|
|
|
interrupts = <2>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
interrupt-parent = <&qeic>;
|
2006-10-03 08:10:10 +07:00
|
|
|
mode = "cpu";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
spi@500 {
|
2008-01-24 22:40:07 +07:00
|
|
|
cell-index = <1>;
|
|
|
|
|
compatible = "fsl,spi";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x500 0x40>;
|
2006-10-03 08:10:10 +07:00
|
|
|
interrupts = <1>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
interrupt-parent = <&qeic>;
|
2006-10-03 08:10:10 +07:00
|
|
|
mode = "cpu";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb@6c0 {
|
2008-12-18 23:37:31 +07:00
|
|
|
compatible = "fsl,mpc8360-qe-usb",
|
|
|
|
|
"fsl,mpc8323-qe-usb";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x6c0 0x40 0x8b00 0x100>;
|
|
|
|
|
interrupts = <11>;
|
|
|
|
|
interrupt-parent = <&qeic>;
|
2008-12-18 23:37:31 +07:00
|
|
|
fsl,fullspeed-clock = "clk21";
|
|
|
|
|
fsl,lowspeed-clock = "brg9";
|
|
|
|
|
gpios = <&qe_pio_b 2 0 /* USBOE */
|
|
|
|
|
&qe_pio_b 3 0 /* USBTP */
|
|
|
|
|
&qe_pio_b 8 0 /* USBTN */
|
|
|
|
|
&qe_pio_b 9 0 /* USBRP */
|
|
|
|
|
&qe_pio_b 11 0 /* USBRN */
|
|
|
|
|
&bcsr13 5 0 /* SPEED */
|
|
|
|
|
&bcsr13 4 1>; /* POWER */
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
2007-12-12 13:28:35 +07:00
|
|
|
enet0: ucc@2000 {
|
2006-10-03 08:10:10 +07:00
|
|
|
device_type = "network";
|
|
|
|
|
compatible = "ucc_geth";
|
2007-12-12 13:28:35 +07:00
|
|
|
cell-index = <1>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x2000 0x200>;
|
|
|
|
|
interrupts = <32>;
|
|
|
|
|
interrupt-parent = <&qeic>;
|
2007-06-23 02:33:15 +07:00
|
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
2007-12-04 04:17:59 +07:00
|
|
|
rx-clock-name = "none";
|
|
|
|
|
tx-clock-name = "clk9";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
phy-handle = <&phy0>;
|
2007-04-24 04:26:14 +07:00
|
|
|
phy-connection-type = "rgmii-id";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
pio-handle = <&pio1>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
2007-12-12 13:28:35 +07:00
|
|
|
enet1: ucc@3000 {
|
2006-10-03 08:10:10 +07:00
|
|
|
device_type = "network";
|
|
|
|
|
compatible = "ucc_geth";
|
2007-12-12 13:28:35 +07:00
|
|
|
cell-index = <2>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x3000 0x200>;
|
|
|
|
|
interrupts = <33>;
|
|
|
|
|
interrupt-parent = <&qeic>;
|
2007-06-23 02:33:15 +07:00
|
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
2007-12-04 04:17:59 +07:00
|
|
|
rx-clock-name = "none";
|
|
|
|
|
tx-clock-name = "clk4";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
phy-handle = <&phy1>;
|
2007-04-24 04:26:14 +07:00
|
|
|
phy-connection-type = "rgmii-id";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
pio-handle = <&pio2>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mdio@2120 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x2120 0x18>;
|
2008-01-24 22:40:01 +07:00
|
|
|
compatible = "fsl,ucc-mdio";
|
2006-10-03 08:10:10 +07:00
|
|
|
|
2007-02-16 22:57:22 +07:00
|
|
|
phy0: ethernet-phy@00 {
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <17 0x8>;
|
|
|
|
|
reg = <0x0>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
2007-02-16 22:57:22 +07:00
|
|
|
phy1: ethernet-phy@01 {
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <18 0x8>;
|
|
|
|
|
reg = <0x1>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
2012-02-27 19:25:01 +07:00
|
|
|
tbi-phy@2 {
|
|
|
|
|
device_type = "tbi-phy";
|
|
|
|
|
reg = <0x2>;
|
|
|
|
|
};
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
|
2008-01-24 22:39:59 +07:00
|
|
|
qeic: interrupt-controller@80 {
|
2006-10-03 08:10:10 +07:00
|
|
|
interrupt-controller;
|
2008-01-24 22:39:59 +07:00
|
|
|
compatible = "fsl,qe-ic";
|
2006-10-03 08:10:10 +07:00
|
|
|
#address-cells = <0>;
|
|
|
|
|
#interrupt-cells = <1>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
reg = <0x80 0x80>;
|
2006-10-03 08:10:10 +07:00
|
|
|
big-endian;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
interrupts = <32 0x8 33 0x8>; // high:32 low:33
|
|
|
|
|
interrupt-parent = <&ipic>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
2007-09-13 06:23:46 +07:00
|
|
|
};
|
2006-10-03 08:10:10 +07:00
|
|
|
|
2007-12-12 14:46:12 +07:00
|
|
|
pci0: pci@e0008500 {
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
2007-09-13 06:23:46 +07:00
|
|
|
interrupt-map = <
|
|
|
|
|
|
|
|
|
|
/* IDSEL 0x11 AD17 */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0x8800 0x0 0x0 0x1 &ipic 20 0x8
|
|
|
|
|
0x8800 0x0 0x0 0x2 &ipic 21 0x8
|
|
|
|
|
0x8800 0x0 0x0 0x3 &ipic 22 0x8
|
|
|
|
|
0x8800 0x0 0x0 0x4 &ipic 23 0x8
|
2007-09-13 06:23:46 +07:00
|
|
|
|
|
|
|
|
/* IDSEL 0x12 AD18 */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0x9000 0x0 0x0 0x1 &ipic 22 0x8
|
|
|
|
|
0x9000 0x0 0x0 0x2 &ipic 23 0x8
|
|
|
|
|
0x9000 0x0 0x0 0x3 &ipic 20 0x8
|
|
|
|
|
0x9000 0x0 0x0 0x4 &ipic 21 0x8
|
2007-09-13 06:23:46 +07:00
|
|
|
|
|
|
|
|
/* IDSEL 0x13 AD19 */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0x9800 0x0 0x0 0x1 &ipic 23 0x8
|
|
|
|
|
0x9800 0x0 0x0 0x2 &ipic 20 0x8
|
|
|
|
|
0x9800 0x0 0x0 0x3 &ipic 21 0x8
|
|
|
|
|
0x9800 0x0 0x0 0x4 &ipic 22 0x8
|
2007-09-13 06:23:46 +07:00
|
|
|
|
|
|
|
|
/* IDSEL 0x15 AD21*/
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0xa800 0x0 0x0 0x1 &ipic 20 0x8
|
|
|
|
|
0xa800 0x0 0x0 0x2 &ipic 21 0x8
|
|
|
|
|
0xa800 0x0 0x0 0x3 &ipic 22 0x8
|
|
|
|
|
0xa800 0x0 0x0 0x4 &ipic 23 0x8
|
2007-09-13 06:23:46 +07:00
|
|
|
|
|
|
|
|
/* IDSEL 0x16 AD22*/
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0xb000 0x0 0x0 0x1 &ipic 23 0x8
|
|
|
|
|
0xb000 0x0 0x0 0x2 &ipic 20 0x8
|
|
|
|
|
0xb000 0x0 0x0 0x3 &ipic 21 0x8
|
|
|
|
|
0xb000 0x0 0x0 0x4 &ipic 22 0x8
|
2007-09-13 06:23:46 +07:00
|
|
|
|
|
|
|
|
/* IDSEL 0x17 AD23*/
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0xb800 0x0 0x0 0x1 &ipic 22 0x8
|
|
|
|
|
0xb800 0x0 0x0 0x2 &ipic 23 0x8
|
|
|
|
|
0xb800 0x0 0x0 0x3 &ipic 20 0x8
|
|
|
|
|
0xb800 0x0 0x0 0x4 &ipic 21 0x8
|
2007-09-13 06:23:46 +07:00
|
|
|
|
|
|
|
|
/* IDSEL 0x18 AD24*/
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
0xc000 0x0 0x0 0x1 &ipic 21 0x8
|
|
|
|
|
0xc000 0x0 0x0 0x2 &ipic 22 0x8
|
|
|
|
|
0xc000 0x0 0x0 0x3 &ipic 23 0x8
|
|
|
|
|
0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
|
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <66 0x8>;
|
2007-09-13 06:23:46 +07:00
|
|
|
bus-range = <0 0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 04:09:36 +07:00
|
|
|
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
|
|
|
|
|
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
|
|
|
|
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
|
|
|
|
|
clock-frequency = <66666666>;
|
2007-09-13 06:23:46 +07:00
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
#size-cells = <2>;
|
|
|
|
|
#address-cells = <3>;
|
2008-10-08 02:00:18 +07:00
|
|
|
reg = <0xe0008500 0x100 /* internal registers */
|
|
|
|
|
0xe0008300 0x8>; /* config space access registers */
|
2007-09-13 06:23:46 +07:00
|
|
|
compatible = "fsl,mpc8349-pci";
|
|
|
|
|
device_type = "pci";
|
2009-09-16 04:44:02 +07:00
|
|
|
sleep = <&pmc 0x00010000>;
|
2006-10-03 08:10:10 +07:00
|
|
|
};
|
|
|
|
|
};
|