linux_dsm_epyc7002/arch/arm/mach-omap1/dma.c

419 lines
11 KiB
C
Raw Normal View History

/*
* OMAP1/OMAP7xx - specific DMA driver
*
* Copyright (C) 2003 - 2008 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
* DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
* Graphics DMA and LCD DMA graphics tranformations
* by Imre Deak <imre.deak@nokia.com>
* OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
* Converted DMA library into platform driver
* - G, Manjunath Kondaiah <manjugk@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-30 23:41:50 +07:00
#include <linux/omap-dma.h>
#include <mach/tc.h>
#include "soc.h"
#define OMAP1_DMA_BASE (0xfffed800)
static u32 enable_1510_mode;
static const struct omap_dma_reg reg_map[] = {
[GCR] = { 0x0400, 0x00, OMAP_DMA_REG_16BIT },
[GSCR] = { 0x0404, 0x00, OMAP_DMA_REG_16BIT },
[GRST1] = { 0x0408, 0x00, OMAP_DMA_REG_16BIT },
[HW_ID] = { 0x0442, 0x00, OMAP_DMA_REG_16BIT },
[PCH2_ID] = { 0x0444, 0x00, OMAP_DMA_REG_16BIT },
[PCH0_ID] = { 0x0446, 0x00, OMAP_DMA_REG_16BIT },
[PCH1_ID] = { 0x0448, 0x00, OMAP_DMA_REG_16BIT },
[PCHG_ID] = { 0x044a, 0x00, OMAP_DMA_REG_16BIT },
[PCHD_ID] = { 0x044c, 0x00, OMAP_DMA_REG_16BIT },
[CAPS_0] = { 0x044e, 0x00, OMAP_DMA_REG_2X16BIT },
[CAPS_1] = { 0x0452, 0x00, OMAP_DMA_REG_2X16BIT },
[CAPS_2] = { 0x0456, 0x00, OMAP_DMA_REG_16BIT },
[CAPS_3] = { 0x0458, 0x00, OMAP_DMA_REG_16BIT },
[CAPS_4] = { 0x045a, 0x00, OMAP_DMA_REG_16BIT },
[PCH2_SR] = { 0x0460, 0x00, OMAP_DMA_REG_16BIT },
[PCH0_SR] = { 0x0480, 0x00, OMAP_DMA_REG_16BIT },
[PCH1_SR] = { 0x0482, 0x00, OMAP_DMA_REG_16BIT },
[PCHD_SR] = { 0x04c0, 0x00, OMAP_DMA_REG_16BIT },
/* Common Registers */
[CSDP] = { 0x0000, 0x40, OMAP_DMA_REG_16BIT },
[CCR] = { 0x0002, 0x40, OMAP_DMA_REG_16BIT },
[CICR] = { 0x0004, 0x40, OMAP_DMA_REG_16BIT },
[CSR] = { 0x0006, 0x40, OMAP_DMA_REG_16BIT },
[CEN] = { 0x0010, 0x40, OMAP_DMA_REG_16BIT },
[CFN] = { 0x0012, 0x40, OMAP_DMA_REG_16BIT },
[CSFI] = { 0x0014, 0x40, OMAP_DMA_REG_16BIT },
[CSEI] = { 0x0016, 0x40, OMAP_DMA_REG_16BIT },
[CPC] = { 0x0018, 0x40, OMAP_DMA_REG_16BIT }, /* 15xx only */
[CSAC] = { 0x0018, 0x40, OMAP_DMA_REG_16BIT },
[CDAC] = { 0x001a, 0x40, OMAP_DMA_REG_16BIT },
[CDEI] = { 0x001c, 0x40, OMAP_DMA_REG_16BIT },
[CDFI] = { 0x001e, 0x40, OMAP_DMA_REG_16BIT },
[CLNK_CTRL] = { 0x0028, 0x40, OMAP_DMA_REG_16BIT },
/* Channel specific register offsets */
[CSSA] = { 0x0008, 0x40, OMAP_DMA_REG_2X16BIT },
[CDSA] = { 0x000c, 0x40, OMAP_DMA_REG_2X16BIT },
[COLOR] = { 0x0020, 0x40, OMAP_DMA_REG_2X16BIT },
[CCR2] = { 0x0024, 0x40, OMAP_DMA_REG_16BIT },
[LCH_CTRL] = { 0x002a, 0x40, OMAP_DMA_REG_16BIT },
};
static struct resource res[] __initdata = {
[0] = {
.start = OMAP1_DMA_BASE,
.end = OMAP1_DMA_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "0",
.start = INT_DMA_CH0_6,
.flags = IORESOURCE_IRQ,
},
[2] = {
.name = "1",
.start = INT_DMA_CH1_7,
.flags = IORESOURCE_IRQ,
},
[3] = {
.name = "2",
.start = INT_DMA_CH2_8,
.flags = IORESOURCE_IRQ,
},
[4] = {
.name = "3",
.start = INT_DMA_CH3,
.flags = IORESOURCE_IRQ,
},
[5] = {
.name = "4",
.start = INT_DMA_CH4,
.flags = IORESOURCE_IRQ,
},
[6] = {
.name = "5",
.start = INT_DMA_CH5,
.flags = IORESOURCE_IRQ,
},
/* Handled in lcd_dma.c */
[7] = {
.name = "6",
.start = INT_1610_DMA_CH6,
.flags = IORESOURCE_IRQ,
},
/* irq's for omap16xx and omap7xx */
[8] = {
.name = "7",
.start = INT_1610_DMA_CH7,
.flags = IORESOURCE_IRQ,
},
[9] = {
.name = "8",
.start = INT_1610_DMA_CH8,
.flags = IORESOURCE_IRQ,
},
[10] = {
.name = "9",
.start = INT_1610_DMA_CH9,
.flags = IORESOURCE_IRQ,
},
[11] = {
.name = "10",
.start = INT_1610_DMA_CH10,
.flags = IORESOURCE_IRQ,
},
[12] = {
.name = "11",
.start = INT_1610_DMA_CH11,
.flags = IORESOURCE_IRQ,
},
[13] = {
.name = "12",
.start = INT_1610_DMA_CH12,
.flags = IORESOURCE_IRQ,
},
[14] = {
.name = "13",
.start = INT_1610_DMA_CH13,
.flags = IORESOURCE_IRQ,
},
[15] = {
.name = "14",
.start = INT_1610_DMA_CH14,
.flags = IORESOURCE_IRQ,
},
[16] = {
.name = "15",
.start = INT_1610_DMA_CH15,
.flags = IORESOURCE_IRQ,
},
[17] = {
.name = "16",
.start = INT_DMA_LCD,
.flags = IORESOURCE_IRQ,
},
};
static void __iomem *dma_base;
static inline void dma_write(u32 val, int reg, int lch)
{
void __iomem *addr = dma_base;
addr += reg_map[reg].offset;
addr += reg_map[reg].stride * lch;
__raw_writew(val, addr);
if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT)
__raw_writew(val >> 16, addr + 2);
}
static inline u32 dma_read(int reg, int lch)
{
void __iomem *addr = dma_base;
uint32_t val;
addr += reg_map[reg].offset;
addr += reg_map[reg].stride * lch;
val = __raw_readw(addr);
if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT)
val |= __raw_readw(addr + 2) << 16;
return val;
}
static void omap1_clear_lch_regs(int lch)
{
int i;
for (i = CPC; i <= COLOR; i += 1)
dma_write(0, i, lch);
}
static void omap1_clear_dma(int lch)
{
u32 l;
l = dma_read(CCR, lch);
l &= ~OMAP_DMA_CCR_EN;
dma_write(l, CCR, lch);
/* Clear pending interrupts */
l = dma_read(CSR, lch);
}
static void omap1_show_dma_caps(void)
{
if (enable_1510_mode) {
printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
} else {
u16 w;
printk(KERN_INFO "OMAP DMA hardware version %d\n",
dma_read(HW_ID, 0));
printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
dma_read(CAPS_0, 0), dma_read(CAPS_1, 0),
dma_read(CAPS_2, 0), dma_read(CAPS_3, 0),
dma_read(CAPS_4, 0));
/* Disable OMAP 3.0/3.1 compatibility mode. */
w = dma_read(GSCR, 0);
w |= 1 << 3;
dma_write(w, GSCR, 0);
}
}
static unsigned configure_dma_errata(void)
{
unsigned errata = 0;
/*
* Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
if (!cpu_is_omap15xx())
SET_DMA_ERRATA(DMA_ERRATA_3_3);
return errata;
}
static const struct platform_device_info omap_dma_dev_info = {
.name = "omap-dma-engine",
.id = -1,
.dma_mask = DMA_BIT_MASK(32),
.res = res,
.num_res = 1,
};
/* OMAP730, OMAP850 */
static const struct dma_slave_map omap7xx_sdma_map[] = {
{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
};
/* OMAP1510, OMAP1610*/
static const struct dma_slave_map omap1xxx_sdma_map[] = {
{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) },
{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) },
{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) },
{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) },
{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
{ "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) },
{ "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) },
};
static struct omap_system_dma_plat_info dma_plat_info __initdata = {
.reg_map = reg_map,
.channel_stride = 0x40,
.show_dma_caps = omap1_show_dma_caps,
.clear_lch_regs = omap1_clear_lch_regs,
.clear_dma = omap1_clear_dma,
.dma_write = dma_write,
.dma_read = dma_read,
};
static int __init omap1_system_dma_init(void)
{
struct omap_system_dma_plat_info p;
struct omap_dma_dev_attr *d;
struct platform_device *pdev, *dma_pdev;
int ret;
pdev = platform_device_alloc("omap_dma_system", 0);
if (!pdev) {
pr_err("%s: Unable to device alloc for dma\n",
__func__);
return -ENOMEM;
}
dma_base = ioremap(res[0].start, resource_size(&res[0]));
if (!dma_base) {
pr_err("%s: Unable to ioremap\n", __func__);
ret = -ENODEV;
goto exit_device_put;
}
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
goto exit_iounmap;
}
d = kzalloc(sizeof(*d), GFP_KERNEL);
if (!d) {
ret = -ENOMEM;
goto exit_iounmap;
}
/* Valid attributes for omap1 plus processors */
if (cpu_is_omap15xx())
d->dev_caps = ENABLE_1510_MODE;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
if (cpu_is_omap16xx())
d->dev_caps = ENABLE_16XX_MODE;
d->dev_caps |= SRC_PORT;
d->dev_caps |= DST_PORT;
d->dev_caps |= SRC_INDEX;
d->dev_caps |= DST_INDEX;
d->dev_caps |= IS_BURST_ONLY4;
d->dev_caps |= CLEAR_CSR_ON_READ;
d->dev_caps |= IS_WORD_16;
/* available logical channels */
if (cpu_is_omap15xx()) {
d->lch_count = 9;
} else {
if (d->dev_caps & ENABLE_1510_MODE)
d->lch_count = 9;
else
d->lch_count = 16;
}
p = dma_plat_info;
p.dma_attr = d;
p.errata = configure_dma_errata();
if (cpu_is_omap7xx()) {
p.slave_map = omap7xx_sdma_map;
p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
} else {
p.slave_map = omap1xxx_sdma_map;
p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
}
ret = platform_device_add_data(pdev, &p, sizeof(p));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
goto exit_release_d;
}
ret = platform_device_add(pdev);
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
goto exit_release_d;
}
dma_pdev = platform_device_register_full(&omap_dma_dev_info);
if (IS_ERR(dma_pdev)) {
ret = PTR_ERR(dma_pdev);
goto exit_release_pdev;
}
return ret;
exit_release_pdev:
platform_device_del(pdev);
exit_release_d:
kfree(d);
exit_iounmap:
iounmap(dma_base);
exit_device_put:
platform_device_put(pdev);
return ret;
}
arch_initcall(omap1_system_dma_init);