2005-04-17 05:20:36 +07:00
|
|
|
/*
|
|
|
|
ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
|
|
monitoring
|
|
|
|
Christian W. Zuckschwerdt <zany@triq.net> 2000-11-23
|
|
|
|
based on lm75.c by Frodo Looijaard <frodol@dds.nl>
|
|
|
|
Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
|
|
|
|
the help of Jean Delvare <khali@linux-fr.org>
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program; if not, write to the Free Software
|
|
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/jiffies.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/i2c-sensor.h>
|
|
|
|
#include "lm75.h"
|
|
|
|
|
|
|
|
/* Addresses to scan */
|
|
|
|
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
|
|
|
|
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
|
|
|
static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
|
|
|
|
|
|
|
|
/* Insmod parameters */
|
|
|
|
SENSORS_INSMOD_1(ds1621);
|
|
|
|
static int polarity = -1;
|
|
|
|
module_param(polarity, int, 0);
|
|
|
|
MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
|
|
|
|
|
|
|
|
/* Many DS1621 constants specified below */
|
|
|
|
/* Config register used for detection */
|
|
|
|
/* 7 6 5 4 3 2 1 0 */
|
|
|
|
/* |Done|THF |TLF |NVB | X | X |POL |1SHOT| */
|
|
|
|
#define DS1621_REG_CONFIG_NVB 0x10
|
|
|
|
#define DS1621_REG_CONFIG_POLARITY 0x02
|
|
|
|
#define DS1621_REG_CONFIG_1SHOT 0x01
|
|
|
|
#define DS1621_REG_CONFIG_DONE 0x80
|
|
|
|
|
|
|
|
/* The DS1621 registers */
|
|
|
|
#define DS1621_REG_TEMP 0xAA /* word, RO */
|
|
|
|
#define DS1621_REG_TEMP_MIN 0xA1 /* word, RW */
|
|
|
|
#define DS1621_REG_TEMP_MAX 0xA2 /* word, RW */
|
|
|
|
#define DS1621_REG_CONF 0xAC /* byte, RW */
|
|
|
|
#define DS1621_COM_START 0xEE /* no data */
|
|
|
|
#define DS1621_COM_STOP 0x22 /* no data */
|
|
|
|
|
|
|
|
/* The DS1621 configuration register */
|
|
|
|
#define DS1621_ALARM_TEMP_HIGH 0x40
|
|
|
|
#define DS1621_ALARM_TEMP_LOW 0x20
|
|
|
|
|
|
|
|
/* Conversions. Rounding and limit checking is only done on the TO_REG
|
|
|
|
variants. Note that you should be a bit careful with which arguments
|
|
|
|
these macros are called: arguments may be evaluated more than once.
|
|
|
|
Fixing this is just not worth it. */
|
|
|
|
#define ALARMS_FROM_REG(val) ((val) & \
|
|
|
|
(DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
|
|
|
|
|
|
|
|
/* Each client has this additional data */
|
|
|
|
struct ds1621_data {
|
|
|
|
struct i2c_client client;
|
|
|
|
struct semaphore update_lock;
|
|
|
|
char valid; /* !=0 if following fields are valid */
|
|
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
|
|
|
|
u16 temp, temp_min, temp_max; /* Register values, word */
|
|
|
|
u8 conf; /* Register encoding, combined */
|
|
|
|
};
|
|
|
|
|
|
|
|
static int ds1621_attach_adapter(struct i2c_adapter *adapter);
|
|
|
|
static int ds1621_detect(struct i2c_adapter *adapter, int address,
|
|
|
|
int kind);
|
|
|
|
static void ds1621_init_client(struct i2c_client *client);
|
|
|
|
static int ds1621_detach_client(struct i2c_client *client);
|
|
|
|
static struct ds1621_data *ds1621_update_client(struct device *dev);
|
|
|
|
|
|
|
|
/* This is the driver that will be inserted */
|
|
|
|
static struct i2c_driver ds1621_driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.name = "ds1621",
|
|
|
|
.id = I2C_DRIVERID_DS1621,
|
|
|
|
.flags = I2C_DF_NOTIFY,
|
|
|
|
.attach_adapter = ds1621_attach_adapter,
|
|
|
|
.detach_client = ds1621_detach_client,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* All registers are word-sized, except for the configuration register.
|
|
|
|
DS1621 uses a high-byte first convention, which is exactly opposite to
|
|
|
|
the usual practice. */
|
|
|
|
static int ds1621_read_value(struct i2c_client *client, u8 reg)
|
|
|
|
{
|
|
|
|
if (reg == DS1621_REG_CONF)
|
|
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
|
|
else
|
|
|
|
return swab16(i2c_smbus_read_word_data(client, reg));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* All registers are word-sized, except for the configuration register.
|
|
|
|
DS1621 uses a high-byte first convention, which is exactly opposite to
|
|
|
|
the usual practice. */
|
|
|
|
static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)
|
|
|
|
{
|
|
|
|
if (reg == DS1621_REG_CONF)
|
|
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
|
|
else
|
|
|
|
return i2c_smbus_write_word_data(client, reg, swab16(value));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ds1621_init_client(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
int reg = ds1621_read_value(client, DS1621_REG_CONF);
|
2005-05-04 07:21:25 +07:00
|
|
|
/* switch to continuous conversion mode */
|
2005-04-17 05:20:36 +07:00
|
|
|
reg &= ~ DS1621_REG_CONFIG_1SHOT;
|
|
|
|
|
|
|
|
/* setup output polarity */
|
|
|
|
if (polarity == 0)
|
|
|
|
reg &= ~DS1621_REG_CONFIG_POLARITY;
|
|
|
|
else if (polarity == 1)
|
|
|
|
reg |= DS1621_REG_CONFIG_POLARITY;
|
|
|
|
|
|
|
|
ds1621_write_value(client, DS1621_REG_CONF, reg);
|
|
|
|
|
|
|
|
/* start conversion */
|
|
|
|
i2c_smbus_write_byte(client, DS1621_COM_START);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define show(value) \
|
2005-05-17 17:41:35 +07:00
|
|
|
static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
|
2005-04-17 05:20:36 +07:00
|
|
|
{ \
|
|
|
|
struct ds1621_data *data = ds1621_update_client(dev); \
|
|
|
|
return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \
|
|
|
|
}
|
|
|
|
|
|
|
|
show(temp);
|
|
|
|
show(temp_min);
|
|
|
|
show(temp_max);
|
|
|
|
|
|
|
|
#define set_temp(suffix, value, reg) \
|
2005-05-17 17:41:35 +07:00
|
|
|
static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
|
2005-04-17 05:20:36 +07:00
|
|
|
size_t count) \
|
|
|
|
{ \
|
|
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
|
|
struct ds1621_data *data = ds1621_update_client(dev); \
|
|
|
|
u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \
|
|
|
|
\
|
|
|
|
down(&data->update_lock); \
|
|
|
|
data->value = val; \
|
|
|
|
ds1621_write_value(client, reg, data->value); \
|
|
|
|
up(&data->update_lock); \
|
|
|
|
return count; \
|
|
|
|
}
|
|
|
|
|
|
|
|
set_temp(min, temp_min, DS1621_REG_TEMP_MIN);
|
|
|
|
set_temp(max, temp_max, DS1621_REG_TEMP_MAX);
|
|
|
|
|
2005-05-17 17:41:35 +07:00
|
|
|
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
|
|
|
struct ds1621_data *data = ds1621_update_client(dev);
|
|
|
|
return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf));
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
|
|
|
|
static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL);
|
|
|
|
static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min);
|
|
|
|
static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
|
|
|
|
|
|
|
|
|
|
|
|
static int ds1621_attach_adapter(struct i2c_adapter *adapter)
|
|
|
|
{
|
|
|
|
return i2c_detect(adapter, &addr_data, ds1621_detect);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* This function is called by i2c_detect */
|
|
|
|
int ds1621_detect(struct i2c_adapter *adapter, int address,
|
|
|
|
int kind)
|
|
|
|
{
|
|
|
|
int conf, temp;
|
|
|
|
struct i2c_client *new_client;
|
|
|
|
struct ds1621_data *data;
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
|
|
|
|
| I2C_FUNC_SMBUS_WORD_DATA
|
|
|
|
| I2C_FUNC_SMBUS_WRITE_BYTE))
|
|
|
|
goto exit;
|
|
|
|
|
|
|
|
/* OK. For now, we presume we have a valid client. We now create the
|
|
|
|
client structure, even though we cannot fill it completely yet.
|
|
|
|
But it allows us to access ds1621_{read,write}_value. */
|
|
|
|
if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto exit;
|
|
|
|
}
|
|
|
|
memset(data, 0, sizeof(struct ds1621_data));
|
|
|
|
|
|
|
|
new_client = &data->client;
|
|
|
|
i2c_set_clientdata(new_client, data);
|
|
|
|
new_client->addr = address;
|
|
|
|
new_client->adapter = adapter;
|
|
|
|
new_client->driver = &ds1621_driver;
|
|
|
|
new_client->flags = 0;
|
|
|
|
|
|
|
|
|
|
|
|
/* Now, we do the remaining detection. It is lousy. */
|
|
|
|
if (kind < 0) {
|
|
|
|
/* The NVB bit should be low if no EEPROM write has been
|
|
|
|
requested during the latest 10ms, which is highly
|
|
|
|
improbable in our case. */
|
|
|
|
conf = ds1621_read_value(new_client, DS1621_REG_CONF);
|
|
|
|
if (conf & DS1621_REG_CONFIG_NVB)
|
|
|
|
goto exit_free;
|
|
|
|
/* The 7 lowest bits of a temperature should always be 0. */
|
|
|
|
temp = ds1621_read_value(new_client, DS1621_REG_TEMP);
|
|
|
|
if (temp & 0x007f)
|
|
|
|
goto exit_free;
|
|
|
|
temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN);
|
|
|
|
if (temp & 0x007f)
|
|
|
|
goto exit_free;
|
|
|
|
temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX);
|
|
|
|
if (temp & 0x007f)
|
|
|
|
goto exit_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Determine the chip type - only one kind supported! */
|
|
|
|
if (kind <= 0)
|
|
|
|
kind = ds1621;
|
|
|
|
|
|
|
|
/* Fill in remaining client fields and put it into the global list */
|
|
|
|
strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
|
|
|
|
data->valid = 0;
|
|
|
|
init_MUTEX(&data->update_lock);
|
|
|
|
|
|
|
|
/* Tell the I2C layer a new client has arrived */
|
|
|
|
if ((err = i2c_attach_client(new_client)))
|
|
|
|
goto exit_free;
|
|
|
|
|
|
|
|
/* Initialize the DS1621 chip */
|
|
|
|
ds1621_init_client(new_client);
|
|
|
|
|
|
|
|
/* Register sysfs hooks */
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_alarms);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_input);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_min);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_max);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* OK, this is not exactly good programming practice, usually. But it is
|
|
|
|
very code-efficient in this case. */
|
|
|
|
exit_free:
|
|
|
|
kfree(data);
|
|
|
|
exit:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ds1621_detach_client(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if ((err = i2c_detach_client(client))) {
|
|
|
|
dev_err(&client->dev, "Client deregistration failed, "
|
|
|
|
"client not detached.\n");
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(i2c_get_clientdata(client));
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static struct ds1621_data *ds1621_update_client(struct device *dev)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
struct ds1621_data *data = i2c_get_clientdata(client);
|
|
|
|
u8 new_conf;
|
|
|
|
|
|
|
|
down(&data->update_lock);
|
|
|
|
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|
|
|| !data->valid) {
|
|
|
|
|
|
|
|
dev_dbg(&client->dev, "Starting ds1621 update\n");
|
|
|
|
|
|
|
|
data->conf = ds1621_read_value(client, DS1621_REG_CONF);
|
|
|
|
|
|
|
|
data->temp = ds1621_read_value(client, DS1621_REG_TEMP);
|
|
|
|
|
|
|
|
data->temp_min = ds1621_read_value(client,
|
|
|
|
DS1621_REG_TEMP_MIN);
|
|
|
|
data->temp_max = ds1621_read_value(client,
|
|
|
|
DS1621_REG_TEMP_MAX);
|
|
|
|
|
2005-05-04 07:21:25 +07:00
|
|
|
/* reset alarms if necessary */
|
2005-04-17 05:20:36 +07:00
|
|
|
new_conf = data->conf;
|
|
|
|
if (data->temp < data->temp_min)
|
|
|
|
new_conf &= ~DS1621_ALARM_TEMP_LOW;
|
|
|
|
if (data->temp > data->temp_max)
|
|
|
|
new_conf &= ~DS1621_ALARM_TEMP_HIGH;
|
|
|
|
if (data->conf != new_conf)
|
|
|
|
ds1621_write_value(client, DS1621_REG_CONF,
|
|
|
|
new_conf);
|
|
|
|
|
|
|
|
data->last_updated = jiffies;
|
|
|
|
data->valid = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
up(&data->update_lock);
|
|
|
|
|
|
|
|
return data;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init ds1621_init(void)
|
|
|
|
{
|
|
|
|
return i2c_add_driver(&ds1621_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit ds1621_exit(void)
|
|
|
|
{
|
|
|
|
i2c_del_driver(&ds1621_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
|
|
|
|
MODULE_DESCRIPTION("DS1621 driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
module_init(ds1621_init);
|
|
|
|
module_exit(ds1621_exit);
|