linux_dsm_epyc7002/include/linux/blkdev.h

2101 lines
61 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_BLKDEV_H
#define _LINUX_BLKDEV_H
#include <linux/sched.h>
#include <linux/sched/clock.h>
#ifdef CONFIG_BLOCK
#include <linux/major.h>
#include <linux/genhd.h>
#include <linux/list.h>
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
#include <linux/llist.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/pagemap.h>
#include <linux/backing-dev-defs.h>
#include <linux/wait.h>
#include <linux/mempool.h>
#include <linux/pfn.h>
#include <linux/bio.h>
#include <linux/stringify.h>
#include <linux/gfp.h>
#include <linux/bsg.h>
#include <linux/smp.h>
#include <linux/rcupdate.h>
#include <linux/percpu-refcount.h>
#include <linux/scatterlist.h>
#include <linux/blkzoned.h>
struct module;
struct scsi_ioctl_command;
struct request_queue;
struct elevator_queue;
struct blk_trace;
struct request;
struct sg_io_hdr;
struct bsg_job;
struct blkcg_gq;
struct blk_flush_queue;
struct pr_ops;
struct rq_qos;
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 22:56:08 +07:00
struct blk_queue_stats;
struct blk_stat_callback;
#define BLKDEV_MIN_RQ 4
#define BLKDEV_MAX_RQ 128 /* Default maximum */
/* Must be consistent with blk_mq_poll_stats_bkt() */
#define BLK_MQ_POLL_STATS_BKTS 16
/*
* Maximum number of blkcg policies allowed to be registered concurrently.
* Defined here to simplify include dependency.
*/
block, bfq: add full hierarchical scheduling and cgroups support Add complete support for full hierarchical scheduling, with a cgroups interface. Full hierarchical scheduling is implemented through the 'entity' abstraction: both bfq_queues, i.e., the internal BFQ queues associated with processes, and groups are represented in general by entities. Given the bfq_queues associated with the processes belonging to a given group, the entities representing these queues are sons of the entity representing the group. At higher levels, if a group, say G, contains other groups, then the entity representing G is the parent entity of the entities representing the groups in G. Hierarchical scheduling is performed as follows: if the timestamps of a leaf entity (i.e., of a bfq_queue) change, and such a change lets the entity become the next-to-serve entity for its parent entity, then the timestamps of the parent entity are recomputed as a function of the budget of its new next-to-serve leaf entity. If the parent entity belongs, in its turn, to a group, and its new timestamps let it become the next-to-serve for its parent entity, then the timestamps of the latter parent entity are recomputed as well, and so on. When a new bfq_queue must be set in service, the reverse path is followed: the next-to-serve highest-level entity is chosen, then its next-to-serve child entity, and so on, until the next-to-serve leaf entity is reached, and the bfq_queue that this entity represents is set in service. Writeback is accounted for on a per-group basis, i.e., for each group, the async I/O requests of the processes of the group are enqueued in a distinct bfq_queue, and the entity associated with this queue is a child of the entity associated with the group. Weights can be assigned explicitly to groups and processes through the cgroups interface, differently from what happens, for single processes, if the cgroups interface is not used (as explained in the description of the previous patch). In particular, since each node has a full scheduler, each group can be assigned its own weight. Signed-off-by: Fabio Checconi <fchecconi@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-12 23:23:08 +07:00
#define BLKCG_MAX_POLS 3
typedef void (rq_end_io_fn)(struct request *, blk_status_t);
#define BLK_RL_SYNCFULL (1U << 0)
#define BLK_RL_ASYNCFULL (1U << 1)
struct request_list {
struct request_queue *q; /* the queue this rl belongs to */
blkcg: implement per-blkg request allocation Currently, request_queue has one request_list to allocate requests from regardless of blkcg of the IO being issued. When the unified request pool is used up, cfq proportional IO limits become meaningless - whoever grabs the next request being freed wins the race regardless of the configured weights. This can be easily demonstrated by creating a blkio cgroup w/ very low weight, put a program which can issue a lot of random direct IOs there and running a sequential IO from a different cgroup. As soon as the request pool is used up, the sequential IO bandwidth crashes. This patch implements per-blkg request_list. Each blkg has its own request_list and any IO allocates its request from the matching blkg making blkcgs completely isolated in terms of request allocation. * Root blkcg uses the request_list embedded in each request_queue, which was renamed to @q->root_rl from @q->rq. While making blkcg rl handling a bit harier, this enables avoiding most overhead for root blkcg. * Queue fullness is properly per request_list but bdi isn't blkcg aware yet, so congestion state currently just follows the root blkcg. As writeback isn't aware of blkcg yet, this works okay for async congestion but readahead may get the wrong signals. It's better than blkcg completely collapsing with shared request_list but needs to be improved with future changes. * After this change, each block cgroup gets a full request pool making resource consumption of each cgroup higher. This makes allowing non-root users to create cgroups less desirable; however, note that allowing non-root users to directly manage cgroups is already severely broken regardless of this patch - each block cgroup consumes kernel memory and skews IO weight (IO weights are not hierarchical). v2: queue-sysfs.txt updated and patch description udpated as suggested by Vivek. v3: blk_get_rl() wasn't checking error return from blkg_lookup_create() and may cause oops on lookup failure. Fix it by falling back to root_rl on blkg lookup failures. This problem was spotted by Rakesh Iyer <rni@google.com>. v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in request waitqueue". blk_drain_queue() now wakes up waiters on all blkg->rl on the target queue. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-27 05:05:44 +07:00
#ifdef CONFIG_BLK_CGROUP
struct blkcg_gq *blkg; /* blkg this request pool belongs to */
#endif
/*
* count[], starved[], and wait[] are indexed by
* BLK_RW_SYNC/BLK_RW_ASYNC
*/
int count[2];
int starved[2];
mempool_t *rq_pool;
wait_queue_head_t wait[2];
unsigned int flags;
};
/*
* request flags */
typedef __u32 __bitwise req_flags_t;
/* elevator knows about this request */
#define RQF_SORTED ((__force req_flags_t)(1 << 0))
/* drive already may have started this one */
#define RQF_STARTED ((__force req_flags_t)(1 << 1))
/* uses tagged queueing */
#define RQF_QUEUED ((__force req_flags_t)(1 << 2))
/* may not be passed by ioscheduler */
#define RQF_SOFTBARRIER ((__force req_flags_t)(1 << 3))
/* request for flush sequence */
#define RQF_FLUSH_SEQ ((__force req_flags_t)(1 << 4))
/* merge of different types, fail separately */
#define RQF_MIXED_MERGE ((__force req_flags_t)(1 << 5))
/* track inflight for MQ */
#define RQF_MQ_INFLIGHT ((__force req_flags_t)(1 << 6))
/* don't call prep for this one */
#define RQF_DONTPREP ((__force req_flags_t)(1 << 7))
/* set for "ide_preempt" requests and also for requests for which the SCSI
"quiesce" state must be ignored. */
#define RQF_PREEMPT ((__force req_flags_t)(1 << 8))
/* contains copies of user pages */
#define RQF_COPY_USER ((__force req_flags_t)(1 << 9))
/* vaguely specified driver internal error. Ignored by the block layer */
#define RQF_FAILED ((__force req_flags_t)(1 << 10))
/* don't warn about errors */
#define RQF_QUIET ((__force req_flags_t)(1 << 11))
/* elevator private data attached */
#define RQF_ELVPRIV ((__force req_flags_t)(1 << 12))
/* account I/O stat */
#define RQF_IO_STAT ((__force req_flags_t)(1 << 13))
/* request came from our alloc pool */
#define RQF_ALLOCED ((__force req_flags_t)(1 << 14))
/* runtime pm request */
#define RQF_PM ((__force req_flags_t)(1 << 15))
/* on IO scheduler merge hash */
#define RQF_HASHED ((__force req_flags_t)(1 << 16))
/* IO stats tracking on */
#define RQF_STATS ((__force req_flags_t)(1 << 17))
/* Look at ->special_vec for the actual data payload instead of the
bio chain. */
#define RQF_SPECIAL_PAYLOAD ((__force req_flags_t)(1 << 18))
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
/* The per-zone write lock is held for this request */
#define RQF_ZONE_WRITE_LOCKED ((__force req_flags_t)(1 << 19))
/* already slept for hybrid poll */
#define RQF_MQ_POLL_SLEPT ((__force req_flags_t)(1 << 20))
/* ->timeout has been called, don't expire again */
#define RQF_TIMED_OUT ((__force req_flags_t)(1 << 21))
/* flags that prevent us from merging requests: */
#define RQF_NOMERGE_FLAGS \
(RQF_STARTED | RQF_SOFTBARRIER | RQF_FLUSH_SEQ | RQF_SPECIAL_PAYLOAD)
/*
* Request state for blk-mq.
*/
enum mq_rq_state {
MQ_RQ_IDLE = 0,
MQ_RQ_IN_FLIGHT = 1,
MQ_RQ_COMPLETE = 2,
};
/*
* Try to put the fields that are referenced together in the same cacheline.
*
* If you modify this structure, make sure to update blk_rq_init() and
* especially blk_mq_rq_ctx_init() to take care of the added fields.
*/
struct request {
struct request_queue *q;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
struct blk_mq_ctx *mq_ctx;
int cpu;
unsigned int cmd_flags; /* op and common flags */
req_flags_t rq_flags;
int internal_tag;
/* the following two fields are internal, NEVER access directly */
unsigned int __data_len; /* total data len */
int tag;
sector_t __sector; /* sector cursor */
struct bio *bio;
struct bio *biotail;
struct list_head queuelist;
block: fix regression with block enabled tagging Martin reported that his test system would not boot with current git, it oopsed with this: BUG: unable to handle kernel paging request at ffff88046c6c9e80 IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246 Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 Workqueue: events_unbound async_run_entry_fn task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000 RIP: 0010:[<ffffffff812971e0>] [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP: 0018:ffff880273d03a58 EFLAGS: 00010092 RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6 RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410 R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0 R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e FS: 0000000000000000(0000) GS:ffff880277b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0 Stack: ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8 Call Trace: [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510 [<ffffffff81293167>] __blk_run_queue+0x37/0x50 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0 [<ffffffff813bba35>] scsi_execute+0xe5/0x180 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod] [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod] [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod] [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140 [<ffffffff8106a1c5>] process_one_work+0x175/0x410 [<ffffffff8106b373>] worker_thread+0x123/0x400 [<ffffffff8106b250>] ? manage_workers+0x160/0x160 [<ffffffff8107104e>] kthread+0xce/0xf0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89 df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89 58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d RIP [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP <ffff880273d03a58> CR2: ffff88046c6c9e80 Martin bisected and found this to be the problem patch; commit 6d113398dcf4dfcd9787a4ead738b186f7b7ff0f Author: Jan Kara <jack@suse.cz> Date: Mon Feb 24 16:39:54 2014 +0100 block: Stop abusing rq->csd.list in blk-softirq and the problem was immediately apparent. The patch states that it is safe to reuse queuelist at completion time, since it is no longer used. However, that is not true if a device is using block enabled tagging. If that is the case, then the queuelist is reused to keep track of busy tags. If a device also ended up using softirq completions, we'd reuse ->queuelist for the IPI handling while block tagging was still using it. Boom. Fix this by adding a new ipi_list list head, and share the memory used with the request hash table. The hash table is never used after the request is moved to the dispatch list, which happens long before any potential completion of the request. Add a new request bit for this, so we don't have cases that check rq->hash while it could potentially have been reused for the IPI completion. Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:27:01 +07:00
/*
* The hash is used inside the scheduler, and killed once the
* request reaches the dispatch list. The ipi_list is only used
* to queue the request for softirq completion, which is long
* after the request has been unhashed (and even removed from
* the dispatch list).
*/
union {
struct hlist_node hash; /* merge hash */
struct list_head ipi_list;
};
/*
* The rb_node is only used inside the io scheduler, requests
* are pruned when moved to the dispatch queue. So let the
* completion_data share space with the rb_node.
*/
union {
struct rb_node rb_node; /* sort/lookup */
struct bio_vec special_vec;
void *completion_data;
int error_count; /* for legacy drivers, don't use */
};
/*
blkio: Fix blkio crash during rq stat update blkio + cfq was crashing even when two sequential readers were put in two separate cgroups (group_isolation=0). The reason being that cfqq can migrate across groups based on its being sync-noidle or not, it can happen that at request insertion time, cfqq belonged to one cfqg and at request dispatch time, it belonged to root group. In this case request stats per cgroup can go wrong and it also runs into BUG_ON(). This patch implements rq stashing away a cfq group pointer and not relying on cfqq->cfqg pointer alone for rq stat accounting. [ 65.163523] ------------[ cut here ]------------ [ 65.164301] kernel BUG at block/blk-cgroup.c:117! [ 65.164301] invalid opcode: 0000 [#1] SMP [ 65.164301] last sysfs file: /sys/devices/pci0000:00/0000:00:05.0/0000:60:00.1/host9/rport-9:0-0/target9:0:0/9:0:0:2/block/sde/stat [ 65.164301] CPU 1 [ 65.164301] Modules linked in: dm_round_robin dm_multipath qla2xxx scsi_transport_fc dm_zero dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] [ 65.164301] [ 65.164301] Pid: 4505, comm: fio Not tainted 2.6.34-rc4-blk-for-35 #34 0A98h/HP xw8600 Workstation [ 65.164301] RIP: 0010:[<ffffffff8121924f>] [<ffffffff8121924f>] blkiocg_update_io_remove_stats+0x5b/0xaf [ 65.164301] RSP: 0018:ffff8800ba5a79e8 EFLAGS: 00010046 [ 65.164301] RAX: 0000000000000096 RBX: ffff8800bb268d60 RCX: 0000000000000000 [ 65.164301] RDX: ffff8800bb268eb8 RSI: 0000000000000000 RDI: ffff8800bb268e00 [ 65.164301] RBP: ffff8800ba5a7a08 R08: 0000000000000064 R09: 0000000000000001 [ 65.164301] R10: 0000000000079640 R11: ffff8800a0bd5bf0 R12: ffff8800bab4af01 [ 65.164301] R13: ffff8800bab4af00 R14: ffff8800bb1d8928 R15: 0000000000000000 [ 65.164301] FS: 00007f18f75056f0(0000) GS:ffff880001e40000(0000) knlGS:0000000000000000 [ 65.164301] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 65.164301] CR2: 000000000040e7f0 CR3: 00000000ba52b000 CR4: 00000000000006e0 [ 65.164301] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 65.164301] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 65.164301] Process fio (pid: 4505, threadinfo ffff8800ba5a6000, task ffff8800ba45ae80) [ 65.164301] Stack: [ 65.164301] ffff8800ba5a7a08 ffff8800ba722540 ffff8800bab4af68 ffff8800bab4af68 [ 65.164301] <0> ffff8800ba5a7a38 ffffffff8121d814 ffff8800ba722540 ffff8800bab4af68 [ 65.164301] <0> ffff8800ba722540 ffff8800a08f6800 ffff8800ba5a7a68 ffffffff8121d8ca [ 65.164301] Call Trace: [ 65.164301] [<ffffffff8121d814>] cfq_remove_request+0xe4/0x116 [ 65.164301] [<ffffffff8121d8ca>] cfq_dispatch_insert+0x84/0xe1 [ 65.164301] [<ffffffff8121e833>] cfq_dispatch_requests+0x767/0x8e8 [ 65.164301] [<ffffffff8120e524>] ? submit_bio+0xc3/0xcc [ 65.164301] [<ffffffff810ad657>] ? sync_page_killable+0x0/0x35 [ 65.164301] [<ffffffff8120ea8d>] blk_peek_request+0x191/0x1a7 [ 65.164301] [<ffffffffa000109c>] ? dm_get_live_table+0x44/0x4f [dm_mod] [ 65.164301] [<ffffffffa0002799>] dm_request_fn+0x38/0x14c [dm_mod] [ 65.164301] [<ffffffff810ad657>] ? sync_page_killable+0x0/0x35 [ 65.164301] [<ffffffff8120f600>] __generic_unplug_device+0x32/0x37 [ 65.164301] [<ffffffff8120f8a0>] generic_unplug_device+0x2e/0x3c [ 65.164301] [<ffffffffa00011a6>] dm_unplug_all+0x42/0x5b [dm_mod] [ 65.164301] [<ffffffff8120b063>] blk_unplug+0x29/0x2d [ 65.164301] [<ffffffff8120b079>] blk_backing_dev_unplug+0x12/0x14 [ 65.164301] [<ffffffff81108a82>] block_sync_page+0x35/0x39 [ 65.164301] [<ffffffff810ad64e>] sync_page+0x41/0x4a [ 65.164301] [<ffffffff810ad665>] sync_page_killable+0xe/0x35 [ 65.164301] [<ffffffff81589027>] __wait_on_bit_lock+0x46/0x8f [ 65.164301] [<ffffffff810ad52d>] __lock_page_killable+0x66/0x6d [ 65.164301] [<ffffffff81055fd4>] ? wake_bit_function+0x0/0x33 [ 65.164301] [<ffffffff810ad560>] lock_page_killable+0x2c/0x2e [ 65.164301] [<ffffffff810aebfd>] generic_file_aio_read+0x361/0x4f0 [ 65.164301] [<ffffffff810e906c>] do_sync_read+0xcb/0x108 [ 65.164301] [<ffffffff811e32a3>] ? security_file_permission+0x16/0x18 [ 65.164301] [<ffffffff810e96d3>] vfs_read+0xab/0x108 [ 65.164301] [<ffffffff810e97f0>] sys_read+0x4a/0x6e [ 65.164301] [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b [ 65.164301] Code: 00 74 1c 48 8b 8b 60 01 00 00 48 85 c9 75 04 0f 0b eb fe 48 ff c9 48 89 8b 60 01 00 00 eb 1a 48 8b 8b 58 01 00 00 48 85 c9 75 04 <0f> 0b eb fe 48 ff c9 48 89 8b 58 01 00 00 45 84 e4 74 16 48 8b [ 65.164301] RIP [<ffffffff8121924f>] blkiocg_update_io_remove_stats+0x5b/0xaf [ 65.164301] RSP <ffff8800ba5a79e8> [ 65.164301] ---[ end trace 1b2b828753032e68 ]--- Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-21 22:44:16 +07:00
* Three pointers are available for the IO schedulers, if they need
* more they have to dynamically allocate it. Flush requests are
* never put on the IO scheduler. So let the flush fields share
* space with the elevator data.
*/
union {
struct {
struct io_cq *icq;
void *priv[2];
} elv;
struct {
unsigned int seq;
struct list_head list;
block: fix flush machinery for stacking drivers with differring flush flags Commit ae1b1539622fb46e51b4d13b3f9e5f4c713f86ae, block: reimplement FLUSH/FUA to support merge, introduced a performance regression when running any sort of fsyncing workload using dm-multipath and certain storage (in our case, an HP EVA). The test I ran was fs_mark, and it dropped from ~800 files/sec on ext4 to ~100 files/sec. It turns out that dm-multipath always advertised flush+fua support, and passed commands on down the stack, where those flags used to get stripped off. The above commit changed that behavior: static inline struct request *__elv_next_request(struct request_queue *q) { struct request *rq; while (1) { - while (!list_empty(&q->queue_head)) { + if (!list_empty(&q->queue_head)) { rq = list_entry_rq(q->queue_head.next); - if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) || - (rq->cmd_flags & REQ_FLUSH_SEQ)) - return rq; - rq = blk_do_flush(q, rq); - if (rq) - return rq; + return rq; } Note that previously, a command would come in here, have REQ_FLUSH|REQ_FUA set, and then get handed off to blk_do_flush: struct request *blk_do_flush(struct request_queue *q, struct request *rq) { unsigned int fflags = q->flush_flags; /* may change, cache it */ bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA; bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH); bool do_postflush = has_flush && !has_fua && (rq->cmd_flags & REQ_FUA); unsigned skip = 0; ... if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) { rq->cmd_flags &= ~REQ_FLUSH; if (!has_fua) rq->cmd_flags &= ~REQ_FUA; return rq; } So, the flush machinery was bypassed in such cases (q->flush_flags == 0 && rq->cmd_flags & (REQ_FLUSH|REQ_FUA)). Now, however, we don't get into the flush machinery at all. Instead, __elv_next_request just hands a request with flush and fua bits set to the scsi_request_fn, even if the underlying request_queue does not support flush or fua. The agreed upon approach is to fix the flush machinery to allow stacking. While this isn't used in practice (since there is only one request-based dm target, and that target will now reflect the flush flags of the underlying device), it does future-proof the solution, and make it function as designed. In order to make this work, I had to add a field to the struct request, inside the flush structure (to store the original req->end_io). Shaohua had suggested overloading the union with rb_node and completion_data, but the completion data is used by device mapper and can also be used by other drivers. So, I didn't see a way around the additional field. I tested this patch on an HP EVA with both ext4 and xfs, and it recovers the lost performance. Comments and other testers, as always, are appreciated. Cheers, Jeff Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-16 02:37:25 +07:00
rq_end_io_fn *saved_end_io;
} flush;
};
struct gendisk *rq_disk;
block: fix accounting bug on cross partition merges /proc/diskstats would display a strange output as follows. $ cat /proc/diskstats |grep sda 8 0 sda 90524 7579 102154 20464 0 0 0 0 0 14096 20089 8 1 sda1 19085 1352 21841 4209 0 0 0 0 4294967064 15689 4293424691 ~~~~~~~~~~ 8 2 sda2 71252 3624 74891 15950 0 0 0 0 232 23995 1562390 8 3 sda3 54 487 2188 92 0 0 0 0 0 88 92 8 4 sda4 4 0 8 0 0 0 0 0 0 0 0 8 5 sda5 81 2027 2130 138 0 0 0 0 0 87 137 Its reason is the wrong way of accounting hd_struct->in_flight. When a bio is merged into a request belongs to different partition by ELEVATOR_FRONT_MERGE. The detailed root cause is as follows. Assuming that there are two partition, sda1 and sda2. 1. A request for sda2 is in request_queue. Hence sda1's hd_struct->in_flight is 0 and sda2's one is 1. | hd_struct->in_flight --------------------------- sda1 | 0 sda2 | 1 --------------------------- 2. A bio belongs to sda1 is issued and is merged into the request mentioned on step1 by ELEVATOR_BACK_MERGE. The first sector of the request is changed from sda2 region to sda1 region. However the two partition's hd_struct->in_flight are not changed. | hd_struct->in_flight --------------------------- sda1 | 0 sda2 | 1 --------------------------- 3. The request is finished and blk_account_io_done() is called. In this case, sda2's hd_struct->in_flight, not a sda1's one, is decremented. | hd_struct->in_flight --------------------------- sda1 | -1 sda2 | 1 --------------------------- The patch fixes the problem by caching the partition lookup inside the request structure, hence making sure that the increment and decrement will always happen on the same partition struct. This also speeds up IO with accounting enabled, since it cuts down on the number of lookups we have to do. Also add a refcount to struct hd_struct to keep the partition in memory as long as users exist. We use kref_test_and_get() to ensure we don't add a reference to a partition which is going away. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-05 22:57:38 +07:00
struct hd_struct *part;
/* Time that I/O was submitted to the kernel. */
u64 start_time_ns;
/* Time that I/O was submitted to the device. */
u64 io_start_time_ns;
#ifdef CONFIG_BLK_WBT
unsigned short wbt_flags;
#endif
#ifdef CONFIG_BLK_DEV_THROTTLING_LOW
unsigned short throtl_size;
#endif
/*
* Number of scatter-gather DMA addr+len pairs after
* physical address coalescing is performed.
*/
unsigned short nr_phys_segments;
#if defined(CONFIG_BLK_DEV_INTEGRITY)
unsigned short nr_integrity_segments;
#endif
unsigned short write_hint;
unsigned short ioprio;
void *special; /* opaque pointer available for LLD use */
unsigned int extra_len; /* length of alignment and padding */
enum mq_rq_state state;
refcount_t ref;
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 23:29:48 +07:00
unsigned int timeout;
/* access through blk_rq_set_deadline, blk_rq_deadline */
unsigned long __deadline;
struct list_head timeout_list;
union {
Merge branch 'for-4.16/block' of git://git.kernel.dk/linux-block Pull block updates from Jens Axboe: "This is the main pull request for block IO related changes for the 4.16 kernel. Nothing major in this pull request, but a good amount of improvements and fixes all over the map. This contains: - BFQ improvements, fixes, and cleanups from Angelo, Chiara, and Paolo. - Support for SMR zones for deadline and mq-deadline from Damien and Christoph. - Set of fixes for bcache by way of Michael Lyle, including fixes from himself, Kent, Rui, Tang, and Coly. - Series from Matias for lightnvm with fixes from Hans Holmberg, Javier, and Matias. Mostly centered around pblk, and the removing rrpc 1.2 in preparation for supporting 2.0. - A couple of NVMe pull requests from Christoph. Nothing major in here, just fixes and cleanups, and support for command tracing from Johannes. - Support for blk-throttle for tracking reads and writes separately. From Joseph Qi. A few cleanups/fixes also for blk-throttle from Weiping. - Series from Mike Snitzer that enables dm to register its queue more logically, something that's alwways been problematic on dm since it's a stacked device. - Series from Ming cleaning up some of the bio accessor use, in preparation for supporting multipage bvecs. - Various fixes from Ming closing up holes around queue mapping and quiescing. - BSD partition fix from Richard Narron, fixing a problem where we can't mount newer (10/11) FreeBSD partitions. - Series from Tejun reworking blk-mq timeout handling. The previous scheme relied on atomic bits, but it had races where we would think a request had timed out if it to reused at the wrong time. - null_blk now supports faking timeouts, to enable us to better exercise and test that functionality separately. From me. - Kill the separate atomic poll bit in the request struct. After this, we don't use the atomic bits on blk-mq anymore at all. From me. - sgl_alloc/free helpers from Bart. - Heavily contended tag case scalability improvement from me. - Various little fixes and cleanups from Arnd, Bart, Corentin, Douglas, Eryu, Goldwyn, and myself" * 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits) block: remove smart1,2.h nvme: add tracepoint for nvme_complete_rq nvme: add tracepoint for nvme_setup_cmd nvme-pci: introduce RECONNECTING state to mark initializing procedure nvme-rdma: remove redundant boolean for inline_data nvme: don't free uuid pointer before printing it nvme-pci: Suspend queues after deleting them bsg: use pr_debug instead of hand crafted macros blk-mq-debugfs: don't allow write on attributes with seq_operations set nvme-pci: Fix queue double allocations block: Set BIO_TRACE_COMPLETION on new bio during split blk-throttle: use queue_is_rq_based block: Remove kblockd_schedule_delayed_work{,_on}() blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly() lib/scatterlist: Fix chaining support in sgl_alloc_order() blk-throttle: track read and write request individually block: add bdev_read_only() checks to common helpers block: fail op_is_write() requests to read-only partitions blk-throttle: export io_serviced_recursive, io_service_bytes_recursive ...
2018-01-30 02:51:49 +07:00
struct __call_single_data csd;
u64 fifo_time;
};
/*
* completion callback.
*/
rq_end_io_fn *end_io;
void *end_io_data;
/* for bidi */
struct request *next_rq;
#ifdef CONFIG_BLK_CGROUP
struct request_list *rl; /* rl this rq is alloced from */
#endif
};
static inline bool blk_op_is_scsi(unsigned int op)
{
return op == REQ_OP_SCSI_IN || op == REQ_OP_SCSI_OUT;
}
static inline bool blk_op_is_private(unsigned int op)
{
return op == REQ_OP_DRV_IN || op == REQ_OP_DRV_OUT;
}
static inline bool blk_rq_is_scsi(struct request *rq)
{
return blk_op_is_scsi(req_op(rq));
}
static inline bool blk_rq_is_private(struct request *rq)
{
return blk_op_is_private(req_op(rq));
}
static inline bool blk_rq_is_passthrough(struct request *rq)
{
return blk_rq_is_scsi(rq) || blk_rq_is_private(rq);
}
static inline bool bio_is_passthrough(struct bio *bio)
{
unsigned op = bio_op(bio);
return blk_op_is_scsi(op) || blk_op_is_private(op);
}
static inline unsigned short req_get_ioprio(struct request *req)
{
return req->ioprio;
}
#include <linux/elevator.h>
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
struct blk_queue_ctx;
typedef void (request_fn_proc) (struct request_queue *q);
typedef blk_qc_t (make_request_fn) (struct request_queue *q, struct bio *bio);
typedef bool (poll_q_fn) (struct request_queue *q, blk_qc_t);
typedef int (prep_rq_fn) (struct request_queue *, struct request *);
typedef void (unprep_rq_fn) (struct request_queue *, struct request *);
struct bio_vec;
typedef void (softirq_done_fn)(struct request *);
typedef int (dma_drain_needed_fn)(struct request *);
block: add lld busy state exporting interface This patch adds an new interface, blk_lld_busy(), to check lld's busy state from the block layer. blk_lld_busy() calls down into low-level drivers for the checking if the drivers set q->lld_busy_fn() using blk_queue_lld_busy(). This resolves a performance problem on request stacking devices below. Some drivers like scsi mid layer stop dispatching request when they detect busy state on its low-level device like host/target/device. It allows other requests to stay in the I/O scheduler's queue for a chance of merging. Request stacking drivers like request-based dm should follow the same logic. However, there is no generic interface for the stacked device to check if the underlying device(s) are busy. If the request stacking driver dispatches and submits requests to the busy underlying device, the requests will stay in the underlying device's queue without a chance of merging. This causes performance problem on burst I/O load. With this patch, busy state of the underlying device is exported via q->lld_busy_fn(). So the request stacking driver can check it and stop dispatching requests if busy. The underlying device driver must return the busy state appropriately: 1: when the device driver can't process requests immediately. 0: when the device driver can process requests immediately, including abnormal situations where the device driver needs to kill all requests. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-01 21:12:15 +07:00
typedef int (lld_busy_fn) (struct request_queue *q);
typedef int (bsg_job_fn) (struct bsg_job *);
typedef int (init_rq_fn)(struct request_queue *, struct request *, gfp_t);
typedef void (exit_rq_fn)(struct request_queue *, struct request *);
enum blk_eh_timer_return {
BLK_EH_DONE, /* drivers has completed the command */
BLK_EH_RESET_TIMER, /* reset timer and try again */
};
typedef enum blk_eh_timer_return (rq_timed_out_fn)(struct request *);
enum blk_queue_state {
Queue_down,
Queue_up,
};
struct blk_queue_tag {
struct request **tag_index; /* map of busy tags */
unsigned long *tag_map; /* bit map of free/busy tags */
int max_depth; /* what we will send to device */
[PATCH] blk: fix tag shrinking (revive real_max_size) My patch in commit fa72b903f75e4f0f0b2c2feed093005167da4023 incorrectly removed blk_queue_tag->real_max_depth. The original resize implementation was incorrect in the following points. * actual allocation size of tag_index was shorter than real_max_size, but assumed to be of the same size, possibly causing memory access beyond the allocated area. * bits in tag_map between max_deptn and real_max_depth were initialized to 1's, making the tags permanently reserved. In an attempt to fix above two bugs, I had removed allocation optimization in init_tag_map and real_max_size. Tag map/index were allocated and freed immediately during resize. Unfortunately, I wasn't considering that tag map/index can be resized dynamically with tags beyond new_depth active. This led to accessing freed area after shrinking tags and led to the following bug reporting thread on linux-scsi. http://marc.theaimsgroup.com/?l=linux-scsi&m=112319898111885&w=2 To fix the problem, I've revived real_max_depth without allocation optimization in init_tag_map, and Andrew Vasquez confirmed that the problem was fixed. As Jens is not going to be available for a week, he asked me to make sure that this patch reaches you. http://marc.theaimsgroup.com/?l=linux-scsi&m=112325778530886&w=2 Also, a comment was added to make sure that real_max_size is needed for dynamic shrinking. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-06 03:28:11 +07:00
int real_max_depth; /* what the array can hold */
atomic_t refcnt; /* map can be shared */
int alloc_policy; /* tag allocation policy */
int next_tag; /* next tag */
};
#define BLK_TAG_ALLOC_FIFO 0 /* allocate starting from 0 */
#define BLK_TAG_ALLOC_RR 1 /* allocate starting from last allocated tag */
#define BLK_SCSI_MAX_CMDS (256)
#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
/*
* Zoned block device models (zoned limit).
*/
enum blk_zoned_model {
BLK_ZONED_NONE, /* Regular block device */
BLK_ZONED_HA, /* Host-aware zoned block device */
BLK_ZONED_HM, /* Host-managed zoned block device */
};
struct queue_limits {
unsigned long bounce_pfn;
unsigned long seg_boundary_mask;
unsigned long virt_boundary_mask;
unsigned int max_hw_sectors;
block/sd: Fix device-imposed transfer length limits Commit 4f258a46346c ("sd: Fix maximum I/O size for BLOCK_PC requests") had the unfortunate side-effect of removing an implicit clamp to BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer code. This caused problems for some SMR drives. Debugging this issue revealed a few problems with the existing infrastructure since the block layer didn't know how to deal with device-imposed limits, only limits set by the I/O controller. - Introduce a new queue limit, max_dev_sectors, which is used by the ULD to signal the maximum sectors for a REQ_TYPE_FS request. - Ensure that max_dev_sectors is correctly stacked and taken into account when overriding max_sectors through sysfs. - Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer values for later processing. - In sd_revalidate() set the queue's max_dev_sectors based on the MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value is not reported, fall back to a cap based on the CDB TRANSFER LENGTH field size. - In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits VPD--if reported and sane--to signal the preferred device transfer size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS. - blk_limits_max_hw_sectors() is no longer used and can be removed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581 Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: sweeneygj@gmx.com Tested-by: Arzeets <anatol.pomozov@gmail.com> Tested-by: David Eisner <david.eisner@oriel.oxon.org> Tested-by: Mario Kicherer <dev@kicherer.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-14 04:46:48 +07:00
unsigned int max_dev_sectors;
unsigned int chunk_sectors;
unsigned int max_sectors;
unsigned int max_segment_size;
unsigned int physical_block_size;
unsigned int alignment_offset;
unsigned int io_min;
unsigned int io_opt;
unsigned int max_discard_sectors;
unsigned int max_hw_discard_sectors;
unsigned int max_write_same_sectors;
unsigned int max_write_zeroes_sectors;
unsigned int discard_granularity;
unsigned int discard_alignment;
unsigned short logical_block_size;
unsigned short max_segments;
unsigned short max_integrity_segments;
unsigned short max_discard_segments;
unsigned char misaligned;
unsigned char discard_misaligned;
unsigned char cluster;
unsigned char raid_partial_stripes_expensive;
enum blk_zoned_model zoned;
};
#ifdef CONFIG_BLK_DEV_ZONED
struct blk_zone_report_hdr {
unsigned int nr_zones;
u8 padding[60];
};
extern int blkdev_report_zones(struct block_device *bdev,
sector_t sector, struct blk_zone *zones,
unsigned int *nr_zones, gfp_t gfp_mask);
extern int blkdev_reset_zones(struct block_device *bdev, sector_t sectors,
sector_t nr_sectors, gfp_t gfp_mask);
extern int blkdev_report_zones_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg);
extern int blkdev_reset_zones_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg);
#else /* CONFIG_BLK_DEV_ZONED */
static inline int blkdev_report_zones_ioctl(struct block_device *bdev,
fmode_t mode, unsigned int cmd,
unsigned long arg)
{
return -ENOTTY;
}
static inline int blkdev_reset_zones_ioctl(struct block_device *bdev,
fmode_t mode, unsigned int cmd,
unsigned long arg)
{
return -ENOTTY;
}
#endif /* CONFIG_BLK_DEV_ZONED */
struct request_queue {
/*
* Together with queue_head for cacheline sharing
*/
struct list_head queue_head;
struct request *last_merge;
struct elevator_queue *elevator;
int nr_rqs[2]; /* # allocated [a]sync rqs */
int nr_rqs_elvpriv; /* # allocated rqs w/ elvpriv */
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 22:56:08 +07:00
struct blk_queue_stats *stats;
struct rq_qos *rq_qos;
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 02:38:14 +07:00
/*
blkcg: implement per-blkg request allocation Currently, request_queue has one request_list to allocate requests from regardless of blkcg of the IO being issued. When the unified request pool is used up, cfq proportional IO limits become meaningless - whoever grabs the next request being freed wins the race regardless of the configured weights. This can be easily demonstrated by creating a blkio cgroup w/ very low weight, put a program which can issue a lot of random direct IOs there and running a sequential IO from a different cgroup. As soon as the request pool is used up, the sequential IO bandwidth crashes. This patch implements per-blkg request_list. Each blkg has its own request_list and any IO allocates its request from the matching blkg making blkcgs completely isolated in terms of request allocation. * Root blkcg uses the request_list embedded in each request_queue, which was renamed to @q->root_rl from @q->rq. While making blkcg rl handling a bit harier, this enables avoiding most overhead for root blkcg. * Queue fullness is properly per request_list but bdi isn't blkcg aware yet, so congestion state currently just follows the root blkcg. As writeback isn't aware of blkcg yet, this works okay for async congestion but readahead may get the wrong signals. It's better than blkcg completely collapsing with shared request_list but needs to be improved with future changes. * After this change, each block cgroup gets a full request pool making resource consumption of each cgroup higher. This makes allowing non-root users to create cgroups less desirable; however, note that allowing non-root users to directly manage cgroups is already severely broken regardless of this patch - each block cgroup consumes kernel memory and skews IO weight (IO weights are not hierarchical). v2: queue-sysfs.txt updated and patch description udpated as suggested by Vivek. v3: blk_get_rl() wasn't checking error return from blkg_lookup_create() and may cause oops on lookup failure. Fix it by falling back to root_rl on blkg lookup failures. This problem was spotted by Rakesh Iyer <rni@google.com>. v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in request waitqueue". blk_drain_queue() now wakes up waiters on all blkg->rl on the target queue. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-27 05:05:44 +07:00
* If blkcg is not used, @q->root_rl serves all requests. If blkcg
* is used, root blkg allocates from @q->root_rl and all other
* blkgs from their own blkg->rl. Which one to use should be
* determined using bio_request_list().
*/
blkcg: implement per-blkg request allocation Currently, request_queue has one request_list to allocate requests from regardless of blkcg of the IO being issued. When the unified request pool is used up, cfq proportional IO limits become meaningless - whoever grabs the next request being freed wins the race regardless of the configured weights. This can be easily demonstrated by creating a blkio cgroup w/ very low weight, put a program which can issue a lot of random direct IOs there and running a sequential IO from a different cgroup. As soon as the request pool is used up, the sequential IO bandwidth crashes. This patch implements per-blkg request_list. Each blkg has its own request_list and any IO allocates its request from the matching blkg making blkcgs completely isolated in terms of request allocation. * Root blkcg uses the request_list embedded in each request_queue, which was renamed to @q->root_rl from @q->rq. While making blkcg rl handling a bit harier, this enables avoiding most overhead for root blkcg. * Queue fullness is properly per request_list but bdi isn't blkcg aware yet, so congestion state currently just follows the root blkcg. As writeback isn't aware of blkcg yet, this works okay for async congestion but readahead may get the wrong signals. It's better than blkcg completely collapsing with shared request_list but needs to be improved with future changes. * After this change, each block cgroup gets a full request pool making resource consumption of each cgroup higher. This makes allowing non-root users to create cgroups less desirable; however, note that allowing non-root users to directly manage cgroups is already severely broken regardless of this patch - each block cgroup consumes kernel memory and skews IO weight (IO weights are not hierarchical). v2: queue-sysfs.txt updated and patch description udpated as suggested by Vivek. v3: blk_get_rl() wasn't checking error return from blkg_lookup_create() and may cause oops on lookup failure. Fix it by falling back to root_rl on blkg lookup failures. This problem was spotted by Rakesh Iyer <rni@google.com>. v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in request waitqueue". blk_drain_queue() now wakes up waiters on all blkg->rl on the target queue. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-27 05:05:44 +07:00
struct request_list root_rl;
request_fn_proc *request_fn;
make_request_fn *make_request_fn;
poll_q_fn *poll_fn;
prep_rq_fn *prep_rq_fn;
unprep_rq_fn *unprep_rq_fn;
softirq_done_fn *softirq_done_fn;
rq_timed_out_fn *rq_timed_out_fn;
dma_drain_needed_fn *dma_drain_needed;
block: add lld busy state exporting interface This patch adds an new interface, blk_lld_busy(), to check lld's busy state from the block layer. blk_lld_busy() calls down into low-level drivers for the checking if the drivers set q->lld_busy_fn() using blk_queue_lld_busy(). This resolves a performance problem on request stacking devices below. Some drivers like scsi mid layer stop dispatching request when they detect busy state on its low-level device like host/target/device. It allows other requests to stay in the I/O scheduler's queue for a chance of merging. Request stacking drivers like request-based dm should follow the same logic. However, there is no generic interface for the stacked device to check if the underlying device(s) are busy. If the request stacking driver dispatches and submits requests to the busy underlying device, the requests will stay in the underlying device's queue without a chance of merging. This causes performance problem on burst I/O load. With this patch, busy state of the underlying device is exported via q->lld_busy_fn(). So the request stacking driver can check it and stop dispatching requests if busy. The underlying device driver must return the busy state appropriately: 1: when the device driver can't process requests immediately. 0: when the device driver can process requests immediately, including abnormal situations where the device driver needs to kill all requests. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-01 21:12:15 +07:00
lld_busy_fn *lld_busy_fn;
/* Called just after a request is allocated */
init_rq_fn *init_rq_fn;
/* Called just before a request is freed */
exit_rq_fn *exit_rq_fn;
/* Called from inside blk_get_request() */
void (*initialize_rq_fn)(struct request *rq);
const struct blk_mq_ops *mq_ops;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
unsigned int *mq_map;
/* sw queues */
struct blk_mq_ctx __percpu *queue_ctx;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
unsigned int nr_queues;
unsigned int queue_depth;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
/* hw dispatch queues */
struct blk_mq_hw_ctx **queue_hw_ctx;
unsigned int nr_hw_queues;
/*
* Dispatch queue sorting
*/
sector_t end_sector;
struct request *boundary_rq;
/*
* Delayed queue handling
*/
struct delayed_work delay_work;
struct backing_dev_info *backing_dev_info;
/*
* The queue owner gets to use this for whatever they like.
* ll_rw_blk doesn't touch it.
*/
void *queuedata;
/*
* various queue flags, see QUEUE_* below
*/
unsigned long queue_flags;
/*
* ida allocated id for this queue. Used to index queues from
* ioctx.
*/
int id;
/*
* queue needs bounce pages for pages above this limit
*/
gfp_t bounce_gfp;
/*
* protects queue structures from reentrancy. ->__queue_lock should
* _never_ be used directly, it is queue private. always use
* ->queue_lock.
*/
spinlock_t __queue_lock;
spinlock_t *queue_lock;
/*
* queue kobject
*/
struct kobject kobj;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
/*
* mq queue kobject
*/
struct kobject mq_kobj;
#ifdef CONFIG_BLK_DEV_INTEGRITY
struct blk_integrity integrity;
#endif /* CONFIG_BLK_DEV_INTEGRITY */
#ifdef CONFIG_PM
struct device *dev;
int rpm_status;
unsigned int nr_pending;
#endif
/*
* queue settings
*/
unsigned long nr_requests; /* Max # of requests */
unsigned int nr_congestion_on;
unsigned int nr_congestion_off;
unsigned int nr_batching;
unsigned int dma_drain_size;
void *dma_drain_buffer;
unsigned int dma_pad_mask;
unsigned int dma_alignment;
struct blk_queue_tag *queue_tags;
unsigned int nr_sorted;
unsigned int in_flight[2];
/*
* Number of active block driver functions for which blk_drain_queue()
* must wait. Must be incremented around functions that unlock the
* queue_lock internally, e.g. scsi_request_fn().
*/
unsigned int request_fn_active;
unsigned int rq_timeout;
int poll_nsec;
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 22:56:08 +07:00
struct blk_stat_callback *poll_cb;
struct blk_rq_stat poll_stat[BLK_MQ_POLL_STATS_BKTS];
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 22:56:08 +07:00
struct timer_list timeout;
struct work_struct timeout_work;
struct list_head timeout_list;
struct list_head icq_list;
#ifdef CONFIG_BLK_CGROUP
DECLARE_BITMAP (blkcg_pols, BLKCG_MAX_POLS);
struct blkcg_gq *root_blkg;
struct list_head blkg_list;
#endif
struct queue_limits limits;
#ifdef CONFIG_BLK_DEV_ZONED
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
/*
* Zoned block device information for request dispatch control.
* nr_zones is the total number of zones of the device. This is always
* 0 for regular block devices. seq_zones_bitmap is a bitmap of nr_zones
* bits which indicates if a zone is conventional (bit clear) or
* sequential (bit set). seq_zones_wlock is a bitmap of nr_zones
* bits which indicates if a zone is write locked, that is, if a write
* request targeting the zone was dispatched. All three fields are
* initialized by the low level device driver (e.g. scsi/sd.c).
* Stacking drivers (device mappers) may or may not initialize
* these fields.
*
* Reads of this information must be protected with blk_queue_enter() /
* blk_queue_exit(). Modifying this information is only allowed while
* no requests are being processed. See also blk_mq_freeze_queue() and
* blk_mq_unfreeze_queue().
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
*/
unsigned int nr_zones;
unsigned long *seq_zones_bitmap;
unsigned long *seq_zones_wlock;
#endif /* CONFIG_BLK_DEV_ZONED */
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
/*
* sg stuff
*/
unsigned int sg_timeout;
unsigned int sg_reserved_size;
int node;
#ifdef CONFIG_BLK_DEV_IO_TRACE
struct blk_trace *blk_trace;
struct mutex blk_trace_mutex;
#endif
/*
* for flush operations
*/
struct blk_flush_queue *fq;
struct list_head requeue_list;
spinlock_t requeue_lock;
struct delayed_work requeue_work;
struct mutex sysfs_lock;
int bypass_depth;
atomic_t mq_freeze_depth;
#if defined(CONFIG_BLK_DEV_BSG)
bsg_job_fn *bsg_job_fn;
struct bsg_class_device bsg_dev;
#endif
#ifdef CONFIG_BLK_DEV_THROTTLING
/* Throttle data */
struct throtl_data *td;
#endif
struct rcu_head rcu_head;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
wait_queue_head_t mq_freeze_wq;
block: generic request_queue reference counting Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-22 00:20:12 +07:00
struct percpu_ref q_usage_counter;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
struct list_head all_q_node;
struct blk_mq_tag_set *tag_set;
struct list_head tag_set_list;
struct bio_set bio_split;
blk-mq: fix sysfs registration/unregistration race There is a race between cpu hotplug handling and adding/deleting gendisk for blk-mq, where both are trying to register and unregister the same sysfs entries. null_add_dev --> blk_mq_init_queue --> blk_mq_init_allocated_queue --> add to 'all_q_list' (*) --> add_disk --> blk_register_queue --> blk_mq_register_disk (++) null_del_dev --> del_gendisk --> blk_unregister_queue --> blk_mq_unregister_disk (--) --> blk_cleanup_queue --> blk_mq_free_queue --> del from 'all_q_list' (*) blk_mq_queue_reinit --> blk_mq_sysfs_unregister (-) --> blk_mq_sysfs_register (+) While the request queue is added to 'all_q_list' (*), blk_mq_queue_reinit() can be called for the queue anytime by CPU hotplug callback. But blk_mq_sysfs_unregister (-) and blk_mq_sysfs_register (+) in blk_mq_queue_reinit must not be called before blk_mq_register_disk (++) and after blk_mq_unregister_disk (--) is finished. Because '/sys/block/*/mq/' is not exists. There has already been BLK_MQ_F_SYSFS_UP flag in hctx->flags which can be used to track these sysfs stuff, but it is only fixing this issue partially. In order to fix it completely, we just need per-queue flag instead of per-hctx flag with appropriate locking. So this introduces q->mq_sysfs_init_done which is properly protected with all_q_mutex. Also, we need to ensure that blk_mq_map_swqueue() is called with all_q_mutex is held. Since hctx->nr_ctx is reset temporarily and updated in blk_mq_map_swqueue(), so we should avoid blk_mq_register_hctx() seeing the temporary hctx->nr_ctx value in CPU hotplug handling or adding/deleting gendisk . Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-27 00:09:20 +07:00
#ifdef CONFIG_BLK_DEBUG_FS
struct dentry *debugfs_dir;
struct dentry *sched_debugfs_dir;
#endif
blk-mq: fix sysfs registration/unregistration race There is a race between cpu hotplug handling and adding/deleting gendisk for blk-mq, where both are trying to register and unregister the same sysfs entries. null_add_dev --> blk_mq_init_queue --> blk_mq_init_allocated_queue --> add to 'all_q_list' (*) --> add_disk --> blk_register_queue --> blk_mq_register_disk (++) null_del_dev --> del_gendisk --> blk_unregister_queue --> blk_mq_unregister_disk (--) --> blk_cleanup_queue --> blk_mq_free_queue --> del from 'all_q_list' (*) blk_mq_queue_reinit --> blk_mq_sysfs_unregister (-) --> blk_mq_sysfs_register (+) While the request queue is added to 'all_q_list' (*), blk_mq_queue_reinit() can be called for the queue anytime by CPU hotplug callback. But blk_mq_sysfs_unregister (-) and blk_mq_sysfs_register (+) in blk_mq_queue_reinit must not be called before blk_mq_register_disk (++) and after blk_mq_unregister_disk (--) is finished. Because '/sys/block/*/mq/' is not exists. There has already been BLK_MQ_F_SYSFS_UP flag in hctx->flags which can be used to track these sysfs stuff, but it is only fixing this issue partially. In order to fix it completely, we just need per-queue flag instead of per-hctx flag with appropriate locking. So this introduces q->mq_sysfs_init_done which is properly protected with all_q_mutex. Also, we need to ensure that blk_mq_map_swqueue() is called with all_q_mutex is held. Since hctx->nr_ctx is reset temporarily and updated in blk_mq_map_swqueue(), so we should avoid blk_mq_register_hctx() seeing the temporary hctx->nr_ctx value in CPU hotplug handling or adding/deleting gendisk . Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-27 00:09:20 +07:00
bool mq_sysfs_init_done;
size_t cmd_size;
void *rq_alloc_data;
struct work_struct release_work;
#define BLK_MAX_WRITE_HINTS 5
u64 write_hints[BLK_MAX_WRITE_HINTS];
};
#define QUEUE_FLAG_QUEUED 0 /* uses generic tag queueing */
#define QUEUE_FLAG_STOPPED 1 /* queue is stopped */
#define QUEUE_FLAG_DYING 2 /* queue being torn down */
#define QUEUE_FLAG_BYPASS 3 /* act as dumb FIFO queue */
#define QUEUE_FLAG_BIDI 4 /* queue supports bidi requests */
#define QUEUE_FLAG_NOMERGES 5 /* disable merge attempts */
#define QUEUE_FLAG_SAME_COMP 6 /* complete on same CPU-group */
#define QUEUE_FLAG_FAIL_IO 7 /* fake timeout */
#define QUEUE_FLAG_NONROT 9 /* non-rotational device (SSD) */
#define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */
#define QUEUE_FLAG_IO_STAT 10 /* do IO stats */
#define QUEUE_FLAG_DISCARD 11 /* supports DISCARD */
#define QUEUE_FLAG_NOXMERGES 12 /* No extended merges */
#define QUEUE_FLAG_ADD_RANDOM 13 /* Contributes to random pool */
#define QUEUE_FLAG_SECERASE 14 /* supports secure erase */
#define QUEUE_FLAG_SAME_FORCE 15 /* force complete on same CPU */
#define QUEUE_FLAG_DEAD 16 /* queue tear-down finished */
#define QUEUE_FLAG_INIT_DONE 17 /* queue is initialized */
#define QUEUE_FLAG_NO_SG_MERGE 18 /* don't attempt to merge SG segments*/
#define QUEUE_FLAG_POLL 19 /* IO polling enabled if set */
#define QUEUE_FLAG_WC 20 /* Write back caching */
#define QUEUE_FLAG_FUA 21 /* device supports FUA writes */
#define QUEUE_FLAG_FLUSH_NQ 22 /* flush not queueuable */
#define QUEUE_FLAG_DAX 23 /* device supports DAX */
#define QUEUE_FLAG_STATS 24 /* track rq completion times */
#define QUEUE_FLAG_POLL_STATS 25 /* collecting stats for hybrid polling */
#define QUEUE_FLAG_REGISTERED 26 /* queue has been registered to a disk */
#define QUEUE_FLAG_SCSI_PASSTHROUGH 27 /* queue supports SCSI commands */
#define QUEUE_FLAG_QUIESCED 28 /* queue has been quiesced */
#define QUEUE_FLAG_PREEMPT_ONLY 29 /* only process REQ_PREEMPT requests */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_SAME_COMP) | \
(1 << QUEUE_FLAG_ADD_RANDOM))
#define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_SAME_COMP) | \
(1 << QUEUE_FLAG_POLL))
void blk_queue_flag_set(unsigned int flag, struct request_queue *q);
void blk_queue_flag_clear(unsigned int flag, struct request_queue *q);
bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
bool blk_queue_flag_test_and_clear(unsigned int flag, struct request_queue *q);
#define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags)
#define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
#define blk_queue_dying(q) test_bit(QUEUE_FLAG_DYING, &(q)->queue_flags)
#define blk_queue_dead(q) test_bit(QUEUE_FLAG_DEAD, &(q)->queue_flags)
#define blk_queue_bypass(q) test_bit(QUEUE_FLAG_BYPASS, &(q)->queue_flags)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
#define blk_queue_init_done(q) test_bit(QUEUE_FLAG_INIT_DONE, &(q)->queue_flags)
#define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
#define blk_queue_noxmerges(q) \
test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags)
#define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
#define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
#define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
#define blk_queue_secure_erase(q) \
(test_bit(QUEUE_FLAG_SECERASE, &(q)->queue_flags))
#define blk_queue_dax(q) test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags)
#define blk_queue_scsi_passthrough(q) \
test_bit(QUEUE_FLAG_SCSI_PASSTHROUGH, &(q)->queue_flags)
#define blk_noretry_request(rq) \
((rq)->cmd_flags & (REQ_FAILFAST_DEV|REQ_FAILFAST_TRANSPORT| \
REQ_FAILFAST_DRIVER))
#define blk_queue_quiesced(q) test_bit(QUEUE_FLAG_QUIESCED, &(q)->queue_flags)
#define blk_queue_preempt_only(q) \
test_bit(QUEUE_FLAG_PREEMPT_ONLY, &(q)->queue_flags)
#define blk_queue_fua(q) test_bit(QUEUE_FLAG_FUA, &(q)->queue_flags)
extern int blk_set_preempt_only(struct request_queue *q);
extern void blk_clear_preempt_only(struct request_queue *q);
static inline int queue_in_flight(struct request_queue *q)
{
return q->in_flight[0] + q->in_flight[1];
}
static inline bool blk_account_rq(struct request *rq)
{
return (rq->rq_flags & RQF_STARTED) && !blk_rq_is_passthrough(rq);
}
#define blk_rq_cpu_valid(rq) ((rq)->cpu != -1)
#define blk_bidi_rq(rq) ((rq)->next_rq != NULL)
blk_end_request: add new request completion interface (take 4) This patch adds 2 new interfaces for request completion: o blk_end_request() : called without queue lock o __blk_end_request() : called with queue lock held blk_end_request takes 'error' as an argument instead of 'uptodate', which current end_that_request_* take. The meanings of values are below and the value is used when bio is completed. 0 : success < 0 : error Some device drivers call some generic functions below between end_that_request_{first/chunk} and end_that_request_last(). o add_disk_randomness() o blk_queue_end_tag() o blkdev_dequeue_request() These are called in the blk_end_request interfaces as a part of generic request completion. So all device drivers become to call above functions. To decide whether to call blkdev_dequeue_request(), blk_end_request uses list_empty(&rq->queuelist) (blk_queued_rq() macro is added for it). So drivers must re-initialize it using list_init() or so before calling blk_end_request if drivers use it for its specific purpose. (Currently, there is no driver which completes request without re-initializing the queuelist after used it. So rq->queuelist can be used for the purpose above.) "Normal" drivers can be converted to use blk_end_request() in a standard way shown below. a) end_that_request_{chunk/first} spin_lock_irqsave() (add_disk_randomness(), blk_queue_end_tag(), blkdev_dequeue_request()) end_that_request_last() spin_unlock_irqrestore() => blk_end_request() b) spin_lock_irqsave() end_that_request_{chunk/first} (add_disk_randomness(), blk_queue_end_tag(), blkdev_dequeue_request()) end_that_request_last() spin_unlock_irqrestore() => spin_lock_irqsave() __blk_end_request() spin_unlock_irqsave() c) spin_lock_irqsave() (add_disk_randomness(), blk_queue_end_tag(), blkdev_dequeue_request()) end_that_request_last() spin_unlock_irqrestore() => blk_end_request() or spin_lock_irqsave() __blk_end_request() spin_unlock_irqrestore() Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-12-12 05:40:30 +07:00
/* rq->queuelist of dequeued request must be list_empty() */
#define blk_queued_rq(rq) (!list_empty(&(rq)->queuelist))
#define list_entry_rq(ptr) list_entry((ptr), struct request, queuelist)
#define rq_data_dir(rq) (op_is_write(req_op(rq)) ? WRITE : READ)
/*
* Driver can handle struct request, if it either has an old style
* request_fn defined, or is blk-mq based.
*/
static inline bool queue_is_rq_based(struct request_queue *q)
{
return q->request_fn || q->mq_ops;
}
static inline unsigned int blk_queue_cluster(struct request_queue *q)
{
return q->limits.cluster;
}
static inline enum blk_zoned_model
blk_queue_zoned_model(struct request_queue *q)
{
return q->limits.zoned;
}
static inline bool blk_queue_is_zoned(struct request_queue *q)
{
switch (blk_queue_zoned_model(q)) {
case BLK_ZONED_HA:
case BLK_ZONED_HM:
return true;
default:
return false;
}
}
static inline unsigned int blk_queue_zone_sectors(struct request_queue *q)
{
return blk_queue_is_zoned(q) ? q->limits.chunk_sectors : 0;
}
#ifdef CONFIG_BLK_DEV_ZONED
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
static inline unsigned int blk_queue_zone_no(struct request_queue *q,
sector_t sector)
{
if (!blk_queue_is_zoned(q))
return 0;
return sector >> ilog2(q->limits.chunk_sectors);
}
static inline bool blk_queue_zone_is_seq(struct request_queue *q,
sector_t sector)
{
if (!blk_queue_is_zoned(q) || !q->seq_zones_bitmap)
return false;
return test_bit(blk_queue_zone_no(q, sector), q->seq_zones_bitmap);
}
#endif /* CONFIG_BLK_DEV_ZONED */
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
static inline bool rq_is_sync(struct request *rq)
{
return op_is_sync(rq->cmd_flags);
}
static inline bool blk_rl_full(struct request_list *rl, bool sync)
{
unsigned int flag = sync ? BLK_RL_SYNCFULL : BLK_RL_ASYNCFULL;
return rl->flags & flag;
}
static inline void blk_set_rl_full(struct request_list *rl, bool sync)
{
unsigned int flag = sync ? BLK_RL_SYNCFULL : BLK_RL_ASYNCFULL;
rl->flags |= flag;
}
static inline void blk_clear_rl_full(struct request_list *rl, bool sync)
{
unsigned int flag = sync ? BLK_RL_SYNCFULL : BLK_RL_ASYNCFULL;
rl->flags &= ~flag;
}
static inline bool rq_mergeable(struct request *rq)
{
if (blk_rq_is_passthrough(rq))
return false;
if (req_op(rq) == REQ_OP_FLUSH)
return false;
if (req_op(rq) == REQ_OP_WRITE_ZEROES)
return false;
if (rq->cmd_flags & REQ_NOMERGE_FLAGS)
return false;
if (rq->rq_flags & RQF_NOMERGE_FLAGS)
return false;
return true;
}
static inline bool blk_write_same_mergeable(struct bio *a, struct bio *b)
{
if (bio_page(a) == bio_page(b) &&
bio_offset(a) == bio_offset(b))
return true;
return false;
}
static inline unsigned int blk_queue_depth(struct request_queue *q)
{
if (q->queue_depth)
return q->queue_depth;
return q->nr_requests;
}
/*
* q->prep_rq_fn return values
*/
enum {
BLKPREP_OK, /* serve it */
BLKPREP_KILL, /* fatal error, kill, return -EIO */
BLKPREP_DEFER, /* leave on queue */
BLKPREP_INVALID, /* invalid command, kill, return -EREMOTEIO */
};
extern unsigned long blk_max_low_pfn, blk_max_pfn;
/*
* standard bounce addresses:
*
* BLK_BOUNCE_HIGH : bounce all highmem pages
* BLK_BOUNCE_ANY : don't bounce anything
* BLK_BOUNCE_ISA : bounce pages above ISA DMA boundary
*/
#if BITS_PER_LONG == 32
#define BLK_BOUNCE_HIGH ((u64)blk_max_low_pfn << PAGE_SHIFT)
#else
#define BLK_BOUNCE_HIGH -1ULL
#endif
#define BLK_BOUNCE_ANY (-1ULL)
#define BLK_BOUNCE_ISA (DMA_BIT_MASK(24))
/*
* default timeout for SG_IO if none specified
*/
#define BLK_DEFAULT_SG_TIMEOUT (60 * HZ)
#define BLK_MIN_SG_TIMEOUT (7 * HZ)
struct rq_map_data {
struct page **pages;
int page_order;
int nr_entries;
unsigned long offset;
int null_mapped;
block: fix sg SG_DXFER_TO_FROM_DEV regression I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use the block layer mapping API (2.6.28). Douglas Gilbert explained SG_DXFER_TO_FROM_DEV: http://www.spinics.net/lists/linux-scsi/msg37135.html = The semantics of SG_DXFER_TO_FROM_DEV were: - copy user space buffer to kernel (LLD) buffer - do SCSI command which is assumed to be of the DATA_IN (data from device) variety. This would overwrite some or all of the kernel buffer - copy kernel (LLD) buffer back to the user space. The idea was to detect short reads by filling the original user space buffer with some marker bytes ("0xec" it would seem in this report). The "resid" value is a better way of detecting short reads but that was only added this century and requires co-operation from the LLD. = This patch changes the block layer mapping API to support this semantics. This simply adds another field to struct rq_map_data and enables __bio_copy_iov() to copy data from user space even with READ requests. It's better to add the flags field and kills null_mapped and the new from_user fields in struct rq_map_data but that approach makes it difficult to send this patch to stable trees because st and osst drivers use struct rq_map_data (they were converted to use the block layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer mapping API. zhou sf reported this regiression and tested this patch: http://www.spinics.net/lists/linux-scsi/msg37128.html http://www.spinics.net/lists/linux-scsi/msg37168.html Reported-by: zhou sf <sxzzsf@gmail.com> Tested-by: zhou sf <sxzzsf@gmail.com> Cc: stable@kernel.org Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-09 19:46:53 +07:00
int from_user;
};
struct req_iterator {
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-24 08:19:00 +07:00
struct bvec_iter iter;
struct bio *bio;
};
/* This should not be used directly - use rq_for_each_segment */
block: reduce stack footprint of blk_recount_segments() blk_recalc_rq_segments() requires a request structure passed in, which we don't have from blk_recount_segments(). So the latter allocates one on the stack, using > 400 bytes of stack for that. This can cause us to spill over one page of stack from ext4 at least: 0) 4560 400 blk_recount_segments+0x43/0x62 1) 4160 32 bio_phys_segments+0x1c/0x24 2) 4128 32 blk_rq_bio_prep+0x2a/0xf9 3) 4096 32 init_request_from_bio+0xf9/0xfe 4) 4064 112 __make_request+0x33c/0x3f6 5) 3952 144 generic_make_request+0x2d1/0x321 6) 3808 64 submit_bio+0xb9/0xc3 7) 3744 48 submit_bh+0xea/0x10e 8) 3696 368 ext4_mb_init_cache+0x257/0xa6a [ext4] 9) 3328 288 ext4_mb_regular_allocator+0x421/0xcd9 [ext4] 10) 3040 160 ext4_mb_new_blocks+0x211/0x4b4 [ext4] 11) 2880 336 ext4_ext_get_blocks+0xb61/0xd45 [ext4] 12) 2544 96 ext4_get_blocks_wrap+0xf2/0x200 [ext4] 13) 2448 80 ext4_da_get_block_write+0x6e/0x16b [ext4] 14) 2368 352 mpage_da_map_blocks+0x7e/0x4b3 [ext4] 15) 2016 352 ext4_da_writepages+0x2ce/0x43c [ext4] 16) 1664 32 do_writepages+0x2d/0x3c 17) 1632 144 __writeback_single_inode+0x162/0x2cd 18) 1488 96 generic_sync_sb_inodes+0x1e3/0x32b 19) 1392 16 sync_sb_inodes+0xe/0x10 20) 1376 48 writeback_inodes+0x69/0xb3 21) 1328 208 balance_dirty_pages_ratelimited_nr+0x187/0x2f9 22) 1120 224 generic_file_buffered_write+0x1d4/0x2c4 23) 896 176 __generic_file_aio_write_nolock+0x35f/0x393 24) 720 80 generic_file_aio_write+0x6c/0xc8 25) 640 80 ext4_file_write+0xa9/0x137 [ext4] 26) 560 320 do_sync_write+0xf0/0x137 27) 240 48 vfs_write+0xb3/0x13c 28) 192 64 sys_write+0x4c/0x74 29) 128 128 system_call_fastpath+0x16/0x1b Split the segment counting out into a __blk_recalc_rq_segments() helper to avoid allocating an onstack request just for checking the physical segment count. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-23 15:03:10 +07:00
#define for_each_bio(_bio) \
for (; _bio; _bio = _bio->bi_next)
#define __rq_for_each_bio(_bio, rq) \
if ((rq->bio)) \
for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
#define rq_for_each_segment(bvl, _rq, _iter) \
__rq_for_each_bio(_iter.bio, _rq) \
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-24 08:19:00 +07:00
bio_for_each_segment(bvl, _iter.bio, _iter.iter)
#define rq_iter_last(bvec, _iter) \
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-24 08:19:00 +07:00
(_iter.bio->bi_next == NULL && \
bio_iter_last(bvec, _iter.iter))
#ifndef ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
# error "You should define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE for your platform"
#endif
#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
extern void rq_flush_dcache_pages(struct request *rq);
#else
static inline void rq_flush_dcache_pages(struct request *rq)
{
}
#endif
extern int blk_register_queue(struct gendisk *disk);
extern void blk_unregister_queue(struct gendisk *disk);
extern blk_qc_t generic_make_request(struct bio *bio);
extern blk_qc_t direct_make_request(struct bio *bio);
extern void blk_rq_init(struct request_queue *q, struct request *rq);
extern void blk_init_request_from_bio(struct request *req, struct bio *bio);
extern void blk_put_request(struct request *);
extern void __blk_put_request(struct request_queue *, struct request *);
extern struct request *blk_get_request(struct request_queue *, unsigned int op,
blk_mq_req_flags_t flags);
extern void blk_requeue_request(struct request_queue *, struct request *);
block: add lld busy state exporting interface This patch adds an new interface, blk_lld_busy(), to check lld's busy state from the block layer. blk_lld_busy() calls down into low-level drivers for the checking if the drivers set q->lld_busy_fn() using blk_queue_lld_busy(). This resolves a performance problem on request stacking devices below. Some drivers like scsi mid layer stop dispatching request when they detect busy state on its low-level device like host/target/device. It allows other requests to stay in the I/O scheduler's queue for a chance of merging. Request stacking drivers like request-based dm should follow the same logic. However, there is no generic interface for the stacked device to check if the underlying device(s) are busy. If the request stacking driver dispatches and submits requests to the busy underlying device, the requests will stay in the underlying device's queue without a chance of merging. This causes performance problem on burst I/O load. With this patch, busy state of the underlying device is exported via q->lld_busy_fn(). So the request stacking driver can check it and stop dispatching requests if busy. The underlying device driver must return the busy state appropriately: 1: when the device driver can't process requests immediately. 0: when the device driver can process requests immediately, including abnormal situations where the device driver needs to kill all requests. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-01 21:12:15 +07:00
extern int blk_lld_busy(struct request_queue *q);
extern int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
struct bio_set *bs, gfp_t gfp_mask,
int (*bio_ctr)(struct bio *, struct bio *, void *),
void *data);
extern void blk_rq_unprep_clone(struct request *rq);
extern blk_status_t blk_insert_cloned_request(struct request_queue *q,
struct request *rq);
extern int blk_rq_append_bio(struct request *rq, struct bio **bio);
extern void blk_delay_queue(struct request_queue *, unsigned long);
extern void blk_queue_split(struct request_queue *, struct bio **);
extern void blk_recount_segments(struct request_queue *, struct bio *);
block: fail SCSI passthrough ioctls on partition devices Linux allows executing the SG_IO ioctl on a partition or LVM volume, and will pass the command to the underlying block device. This is well-known, but it is also a large security problem when (via Unix permissions, ACLs, SELinux or a combination thereof) a program or user needs to be granted access only to part of the disk. This patch lets partitions forward a small set of harmless ioctls; others are logged with printk so that we can see which ioctls are actually sent. In my tests only CDROM_GET_CAPABILITY actually occurred. Of course it was being sent to a (partition on a) hard disk, so it would have failed with ENOTTY and the patch isn't changing anything in practice. Still, I'm treating it specially to avoid spamming the logs. In principle, this restriction should include programs running with CAP_SYS_RAWIO. If for example I let a program access /dev/sda2 and /dev/sdb, it still should not be able to read/write outside the boundaries of /dev/sda2 independent of the capabilities. However, for now programs with CAP_SYS_RAWIO will still be allowed to send the ioctls. Their actions will still be logged. This patch does not affect the non-libata IDE driver. That driver however already tests for bd != bd->bd_contains before issuing some ioctl; it could be restricted further to forbid these ioctls even for programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO. Cc: linux-scsi@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Cc: James Bottomley <JBottomley@parallels.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [ Make it also print the command name when warning - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 22:01:28 +07:00
extern int scsi_verify_blk_ioctl(struct block_device *, unsigned int);
extern int scsi_cmd_blk_ioctl(struct block_device *, fmode_t,
unsigned int, void __user *);
extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t,
unsigned int, void __user *);
extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
struct scsi_ioctl_command __user *);
extern int blk_queue_enter(struct request_queue *q, blk_mq_req_flags_t flags);
extern void blk_queue_exit(struct request_queue *q);
extern void blk_start_queue(struct request_queue *q);
extern void blk_start_queue_async(struct request_queue *q);
extern void blk_stop_queue(struct request_queue *q);
extern void blk_sync_queue(struct request_queue *q);
extern void __blk_stop_queue(struct request_queue *q);
extern void __blk_run_queue(struct request_queue *q);
extern void __blk_run_queue_uncond(struct request_queue *q);
extern void blk_run_queue(struct request_queue *);
extern void blk_run_queue_async(struct request_queue *q);
extern int blk_rq_map_user(struct request_queue *, struct request *,
struct rq_map_data *, void __user *, unsigned long,
gfp_t);
extern int blk_rq_unmap_user(struct bio *);
extern int blk_rq_map_kern(struct request_queue *, struct request *, void *, unsigned int, gfp_t);
extern int blk_rq_map_user_iov(struct request_queue *, struct request *,
struct rq_map_data *, const struct iov_iter *,
gfp_t);
extern void blk_execute_rq(struct request_queue *, struct gendisk *,
struct request *, int);
extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *,
struct request *, int, rq_end_io_fn *);
int blk_status_to_errno(blk_status_t status);
blk_status_t errno_to_blk_status(int errno);
bool blk_poll(struct request_queue *q, blk_qc_t cookie);
static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
{
return bdev->bd_disk->queue; /* this is never NULL */
}
2018-03-15 05:48:06 +07:00
/*
* The basic unit of block I/O is a sector. It is used in a number of contexts
* in Linux (blk, bio, genhd). The size of one sector is 512 = 2**9
* bytes. Variables of type sector_t represent an offset or size that is a
* multiple of 512 bytes. Hence these two constants.
*/
#ifndef SECTOR_SHIFT
#define SECTOR_SHIFT 9
#endif
#ifndef SECTOR_SIZE
#define SECTOR_SIZE (1 << SECTOR_SHIFT)
#endif
/*
block: implement mixed merge of different failfast requests Failfast has characteristics from other attributes. When issuing, executing and successuflly completing requests, failfast doesn't make any difference. It only affects how a request is handled on failure. Allowing requests with different failfast settings to be merged cause normal IOs to fail prematurely while not allowing has performance penalties as failfast is used for read aheads which are likely to be located near in-flight or to-be-issued normal IOs. This patch introduces the concept of 'mixed merge'. A request is a mixed merge if it is merge of segments which require different handling on failure. Currently the only mixable attributes are failfast ones (or lack thereof). When a bio with different failfast settings is added to an existing request or requests of different failfast settings are merged, the merged request is marked mixed. Each bio carries failfast settings and the request always tracks failfast state of the first bio. When the request fails, blk_rq_err_bytes() can be used to determine how many bytes can be safely failed without crossing into an area which requires further retrials. This allows request merging regardless of failfast settings while keeping the failure handling correct. This patch only implements mixed merge but doesn't enable it. The next one will update SCSI to make use of mixed merge. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Niel Lambrechts <niel.lambrechts@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-03 15:48:17 +07:00
* blk_rq_pos() : the current sector
* blk_rq_bytes() : bytes left in the entire request
* blk_rq_cur_bytes() : bytes left in the current segment
* blk_rq_err_bytes() : bytes left till the next error boundary
* blk_rq_sectors() : sectors left in the entire request
* blk_rq_cur_sectors() : sectors left in the current segment
*/
static inline sector_t blk_rq_pos(const struct request *rq)
{
return rq->__sector;
block: drop request->hard_* and *nr_sectors struct request has had a few different ways to represent some properties of a request. ->hard_* represent block layer's view of the request progress (completion cursor) and the ones without the prefix are supposed to represent the issue cursor and allowed to be updated as necessary by the low level drivers. The thing is that as block layer supports partial completion, the two cursors really aren't necessary and only cause confusion. In addition, manual management of request detail from low level drivers is cumbersome and error-prone at the very least. Another interesting duplicate fields are rq->[hard_]nr_sectors and rq->{hard_cur|current}_nr_sectors against rq->data_len and rq->bio->bi_size. This is more convoluted than the hard_ case. rq->[hard_]nr_sectors are initialized for requests with bio but blk_rq_bytes() uses it only for !pc requests. rq->data_len is initialized for all request but blk_rq_bytes() uses it only for pc requests. This causes good amount of confusion throughout block layer and its drivers and determining the request length has been a bit of black magic which may or may not work depending on circumstances and what the specific LLD is actually doing. rq->{hard_cur|current}_nr_sectors represent the number of sectors in the contiguous data area at the front. This is mainly used by drivers which transfers data by walking request segment-by-segment. This value always equals rq->bio->bi_size >> 9. However, data length for pc requests may not be multiple of 512 bytes and using this field becomes a bit confusing. In general, having multiple fields to represent the same property leads only to confusion and subtle bugs. With recent block low level driver cleanups, no driver is accessing or manipulating these duplicate fields directly. Drop all the duplicates. Now rq->sector means the current sector, rq->data_len the current total length and rq->bio->bi_size the current segment length. Everything else is defined in terms of these three and available only through accessors. * blk_recalc_rq_sectors() is collapsed into blk_update_request() and now handles pc and fs requests equally other than rq->sector update. This means that now pc requests can use partial completion too (no in-kernel user yet tho). * bio_cur_sectors() is replaced with bio_cur_bytes() as block layer now uses byte count as the primary data length. * blk_rq_pos() is now guranteed to be always correct. In-block users converted. * blk_rq_bytes() is now guaranteed to be always valid as is blk_rq_sectors(). In-block users converted. * blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9. More convenient one is used. * blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const pointer to request. [ Impact: API cleanup, single way to represent one property of a request ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 20:24:41 +07:00
}
static inline unsigned int blk_rq_bytes(const struct request *rq)
{
return rq->__data_len;
}
block: drop request->hard_* and *nr_sectors struct request has had a few different ways to represent some properties of a request. ->hard_* represent block layer's view of the request progress (completion cursor) and the ones without the prefix are supposed to represent the issue cursor and allowed to be updated as necessary by the low level drivers. The thing is that as block layer supports partial completion, the two cursors really aren't necessary and only cause confusion. In addition, manual management of request detail from low level drivers is cumbersome and error-prone at the very least. Another interesting duplicate fields are rq->[hard_]nr_sectors and rq->{hard_cur|current}_nr_sectors against rq->data_len and rq->bio->bi_size. This is more convoluted than the hard_ case. rq->[hard_]nr_sectors are initialized for requests with bio but blk_rq_bytes() uses it only for !pc requests. rq->data_len is initialized for all request but blk_rq_bytes() uses it only for pc requests. This causes good amount of confusion throughout block layer and its drivers and determining the request length has been a bit of black magic which may or may not work depending on circumstances and what the specific LLD is actually doing. rq->{hard_cur|current}_nr_sectors represent the number of sectors in the contiguous data area at the front. This is mainly used by drivers which transfers data by walking request segment-by-segment. This value always equals rq->bio->bi_size >> 9. However, data length for pc requests may not be multiple of 512 bytes and using this field becomes a bit confusing. In general, having multiple fields to represent the same property leads only to confusion and subtle bugs. With recent block low level driver cleanups, no driver is accessing or manipulating these duplicate fields directly. Drop all the duplicates. Now rq->sector means the current sector, rq->data_len the current total length and rq->bio->bi_size the current segment length. Everything else is defined in terms of these three and available only through accessors. * blk_recalc_rq_sectors() is collapsed into blk_update_request() and now handles pc and fs requests equally other than rq->sector update. This means that now pc requests can use partial completion too (no in-kernel user yet tho). * bio_cur_sectors() is replaced with bio_cur_bytes() as block layer now uses byte count as the primary data length. * blk_rq_pos() is now guranteed to be always correct. In-block users converted. * blk_rq_bytes() is now guaranteed to be always valid as is blk_rq_sectors(). In-block users converted. * blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9. More convenient one is used. * blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const pointer to request. [ Impact: API cleanup, single way to represent one property of a request ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 20:24:41 +07:00
static inline int blk_rq_cur_bytes(const struct request *rq)
{
return rq->bio ? bio_cur_bytes(rq->bio) : 0;
}
block: implement mixed merge of different failfast requests Failfast has characteristics from other attributes. When issuing, executing and successuflly completing requests, failfast doesn't make any difference. It only affects how a request is handled on failure. Allowing requests with different failfast settings to be merged cause normal IOs to fail prematurely while not allowing has performance penalties as failfast is used for read aheads which are likely to be located near in-flight or to-be-issued normal IOs. This patch introduces the concept of 'mixed merge'. A request is a mixed merge if it is merge of segments which require different handling on failure. Currently the only mixable attributes are failfast ones (or lack thereof). When a bio with different failfast settings is added to an existing request or requests of different failfast settings are merged, the merged request is marked mixed. Each bio carries failfast settings and the request always tracks failfast state of the first bio. When the request fails, blk_rq_err_bytes() can be used to determine how many bytes can be safely failed without crossing into an area which requires further retrials. This allows request merging regardless of failfast settings while keeping the failure handling correct. This patch only implements mixed merge but doesn't enable it. The next one will update SCSI to make use of mixed merge. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Niel Lambrechts <niel.lambrechts@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-03 15:48:17 +07:00
extern unsigned int blk_rq_err_bytes(const struct request *rq);
static inline unsigned int blk_rq_sectors(const struct request *rq)
{
2018-03-15 05:48:06 +07:00
return blk_rq_bytes(rq) >> SECTOR_SHIFT;
}
static inline unsigned int blk_rq_cur_sectors(const struct request *rq)
{
2018-03-15 05:48:06 +07:00
return blk_rq_cur_bytes(rq) >> SECTOR_SHIFT;
}
#ifdef CONFIG_BLK_DEV_ZONED
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
static inline unsigned int blk_rq_zone_no(struct request *rq)
{
return blk_queue_zone_no(rq->q, blk_rq_pos(rq));
}
static inline unsigned int blk_rq_zone_is_seq(struct request *rq)
{
return blk_queue_zone_is_seq(rq->q, blk_rq_pos(rq));
}
#endif /* CONFIG_BLK_DEV_ZONED */
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
/*
* Some commands like WRITE SAME have a payload or data transfer size which
* is different from the size of the request. Any driver that supports such
* commands using the RQF_SPECIAL_PAYLOAD flag needs to use this helper to
* calculate the data transfer size.
*/
static inline unsigned int blk_rq_payload_bytes(struct request *rq)
{
if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
return rq->special_vec.bv_len;
return blk_rq_bytes(rq);
}
static inline unsigned int blk_queue_get_max_sectors(struct request_queue *q,
int op)
{
if (unlikely(op == REQ_OP_DISCARD || op == REQ_OP_SECURE_ERASE))
2018-03-15 05:48:06 +07:00
return min(q->limits.max_discard_sectors,
UINT_MAX >> SECTOR_SHIFT);
if (unlikely(op == REQ_OP_WRITE_SAME))
return q->limits.max_write_same_sectors;
if (unlikely(op == REQ_OP_WRITE_ZEROES))
return q->limits.max_write_zeroes_sectors;
return q->limits.max_sectors;
}
/*
* Return maximum size of a request at given offset. Only valid for
* file system requests.
*/
static inline unsigned int blk_max_size_offset(struct request_queue *q,
sector_t offset)
{
if (!q->limits.chunk_sectors)
return q->limits.max_sectors;
return min(q->limits.max_sectors, (unsigned int)(q->limits.chunk_sectors -
(offset & (q->limits.chunk_sectors - 1))));
}
static inline unsigned int blk_rq_get_max_sectors(struct request *rq,
sector_t offset)
{
struct request_queue *q = rq->q;
if (blk_rq_is_passthrough(rq))
return q->limits.max_hw_sectors;
if (!q->limits.chunk_sectors ||
req_op(rq) == REQ_OP_DISCARD ||
req_op(rq) == REQ_OP_SECURE_ERASE)
return blk_queue_get_max_sectors(q, req_op(rq));
return min(blk_max_size_offset(q, offset),
blk_queue_get_max_sectors(q, req_op(rq)));
}
static inline unsigned int blk_rq_count_bios(struct request *rq)
{
unsigned int nr_bios = 0;
struct bio *bio;
__rq_for_each_bio(bio, rq)
nr_bios++;
return nr_bios;
}
block: implement and enforce request peek/start/fetch Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Miller <mike.miller@hp.com> Cc: unsik Kim <donari75@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Laurent Vivier <Laurent@lvivier.info> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-08 09:54:16 +07:00
/*
* Request issue related functions.
*/
extern struct request *blk_peek_request(struct request_queue *q);
extern void blk_start_request(struct request *rq);
extern struct request *blk_fetch_request(struct request_queue *q);
void blk_steal_bios(struct bio_list *list, struct request *rq);
/*
block: clean up request completion API Request completion has gone through several changes and became a bit messy over the time. Clean it up. 1. end_that_request_data() is a thin wrapper around end_that_request_data_first() which checks whether bio is NULL before doing anything and handles bidi completion. blk_update_request() is a thin wrapper around end_that_request_data() which clears nr_sectors on the last iteration but doesn't use the bidi completion. Clean it up by moving the initial bio NULL check and nr_sectors clearing on the last iteration into end_that_request_data() and renaming it to blk_update_request(), which makes blk_end_io() the only user of end_that_request_data(). Collapse end_that_request_data() into blk_end_io(). 2. There are four visible completion variants - blk_end_request(), __blk_end_request(), blk_end_bidi_request() and end_request(). blk_end_request() and blk_end_bidi_request() uses blk_end_request() as the backend but __blk_end_request() and end_request() use separate implementation in __blk_end_request() due to different locking rules. blk_end_bidi_request() is identical to blk_end_io(). Collapse blk_end_io() into blk_end_bidi_request(), separate out request update into internal helper blk_update_bidi_request() and add __blk_end_bidi_request(). Redefine [__]blk_end_request() as thin inline wrappers around [__]blk_end_bidi_request(). 3. As the whole request issue/completion usages are about to be modified and audited, it's a good chance to convert completion functions return bool which better indicates the intended meaning of return values. 4. The function name end_that_request_last() is from the days when it was a public interface and slighly confusing. Give it a proper internal name - blk_finish_request(). 5. Add description explaning that blk_end_bidi_request() can be safely used for uni requests as suggested by Boaz Harrosh. The only visible behavior change is from #1. nr_sectors counts are cleared after the final iteration no matter which function is used to complete the request. I couldn't find any place where the code assumes those nr_sectors counters contain the values for the last segment and this change is good as it makes the API much more consistent as the end result is now same whether a request is completed using [__]blk_end_request() alone or in combination with blk_update_request(). API further cleaned up per Christoph's suggestion. [ Impact: cleanup, rq->*nr_sectors always updated after req completion ] Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Christoph Hellwig <hch@infradead.org>
2009-04-23 09:05:18 +07:00
* Request completion related functions.
*
* blk_update_request() completes given number of bytes and updates
* the request without completing it.
*
2009-04-23 09:05:19 +07:00
* blk_end_request() and friends. __blk_end_request() must be called
* with the request queue spinlock acquired.
*
* Several drivers define their own end_request and call
* blk_end_request() for parts of the original function.
* This prevents code duplication in drivers.
*/
extern bool blk_update_request(struct request *rq, blk_status_t error,
block: clean up request completion API Request completion has gone through several changes and became a bit messy over the time. Clean it up. 1. end_that_request_data() is a thin wrapper around end_that_request_data_first() which checks whether bio is NULL before doing anything and handles bidi completion. blk_update_request() is a thin wrapper around end_that_request_data() which clears nr_sectors on the last iteration but doesn't use the bidi completion. Clean it up by moving the initial bio NULL check and nr_sectors clearing on the last iteration into end_that_request_data() and renaming it to blk_update_request(), which makes blk_end_io() the only user of end_that_request_data(). Collapse end_that_request_data() into blk_end_io(). 2. There are four visible completion variants - blk_end_request(), __blk_end_request(), blk_end_bidi_request() and end_request(). blk_end_request() and blk_end_bidi_request() uses blk_end_request() as the backend but __blk_end_request() and end_request() use separate implementation in __blk_end_request() due to different locking rules. blk_end_bidi_request() is identical to blk_end_io(). Collapse blk_end_io() into blk_end_bidi_request(), separate out request update into internal helper blk_update_bidi_request() and add __blk_end_bidi_request(). Redefine [__]blk_end_request() as thin inline wrappers around [__]blk_end_bidi_request(). 3. As the whole request issue/completion usages are about to be modified and audited, it's a good chance to convert completion functions return bool which better indicates the intended meaning of return values. 4. The function name end_that_request_last() is from the days when it was a public interface and slighly confusing. Give it a proper internal name - blk_finish_request(). 5. Add description explaning that blk_end_bidi_request() can be safely used for uni requests as suggested by Boaz Harrosh. The only visible behavior change is from #1. nr_sectors counts are cleared after the final iteration no matter which function is used to complete the request. I couldn't find any place where the code assumes those nr_sectors counters contain the values for the last segment and this change is good as it makes the API much more consistent as the end result is now same whether a request is completed using [__]blk_end_request() alone or in combination with blk_update_request(). API further cleaned up per Christoph's suggestion. [ Impact: cleanup, rq->*nr_sectors always updated after req completion ] Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Christoph Hellwig <hch@infradead.org>
2009-04-23 09:05:18 +07:00
unsigned int nr_bytes);
extern void blk_finish_request(struct request *rq, blk_status_t error);
extern bool blk_end_request(struct request *rq, blk_status_t error,
unsigned int nr_bytes);
extern void blk_end_request_all(struct request *rq, blk_status_t error);
extern bool __blk_end_request(struct request *rq, blk_status_t error,
unsigned int nr_bytes);
extern void __blk_end_request_all(struct request *rq, blk_status_t error);
extern bool __blk_end_request_cur(struct request *rq, blk_status_t error);
block: clean up request completion API Request completion has gone through several changes and became a bit messy over the time. Clean it up. 1. end_that_request_data() is a thin wrapper around end_that_request_data_first() which checks whether bio is NULL before doing anything and handles bidi completion. blk_update_request() is a thin wrapper around end_that_request_data() which clears nr_sectors on the last iteration but doesn't use the bidi completion. Clean it up by moving the initial bio NULL check and nr_sectors clearing on the last iteration into end_that_request_data() and renaming it to blk_update_request(), which makes blk_end_io() the only user of end_that_request_data(). Collapse end_that_request_data() into blk_end_io(). 2. There are four visible completion variants - blk_end_request(), __blk_end_request(), blk_end_bidi_request() and end_request(). blk_end_request() and blk_end_bidi_request() uses blk_end_request() as the backend but __blk_end_request() and end_request() use separate implementation in __blk_end_request() due to different locking rules. blk_end_bidi_request() is identical to blk_end_io(). Collapse blk_end_io() into blk_end_bidi_request(), separate out request update into internal helper blk_update_bidi_request() and add __blk_end_bidi_request(). Redefine [__]blk_end_request() as thin inline wrappers around [__]blk_end_bidi_request(). 3. As the whole request issue/completion usages are about to be modified and audited, it's a good chance to convert completion functions return bool which better indicates the intended meaning of return values. 4. The function name end_that_request_last() is from the days when it was a public interface and slighly confusing. Give it a proper internal name - blk_finish_request(). 5. Add description explaning that blk_end_bidi_request() can be safely used for uni requests as suggested by Boaz Harrosh. The only visible behavior change is from #1. nr_sectors counts are cleared after the final iteration no matter which function is used to complete the request. I couldn't find any place where the code assumes those nr_sectors counters contain the values for the last segment and this change is good as it makes the API much more consistent as the end result is now same whether a request is completed using [__]blk_end_request() alone or in combination with blk_update_request(). API further cleaned up per Christoph's suggestion. [ Impact: cleanup, rq->*nr_sectors always updated after req completion ] Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Christoph Hellwig <hch@infradead.org>
2009-04-23 09:05:18 +07:00
extern void blk_complete_request(struct request *);
extern void __blk_complete_request(struct request *);
extern void blk_abort_request(struct request *);
extern void blk_unprep_request(struct request *);
/*
* Access functions for manipulating queue properties
*/
extern struct request_queue *blk_init_queue_node(request_fn_proc *rfn,
spinlock_t *lock, int node_id);
extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *);
extern int blk_init_allocated_queue(struct request_queue *);
extern void blk_cleanup_queue(struct request_queue *);
extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
extern void blk_queue_bounce_limit(struct request_queue *, u64);
extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int);
extern void blk_queue_max_segments(struct request_queue *, unsigned short);
extern void blk_queue_max_discard_segments(struct request_queue *,
unsigned short);
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
extern void blk_queue_max_discard_sectors(struct request_queue *q,
unsigned int max_discard_sectors);
extern void blk_queue_max_write_same_sectors(struct request_queue *q,
unsigned int max_write_same_sectors);
extern void blk_queue_max_write_zeroes_sectors(struct request_queue *q,
unsigned int max_write_same_sectors);
extern void blk_queue_logical_block_size(struct request_queue *, unsigned short);
extern void blk_queue_physical_block_size(struct request_queue *, unsigned int);
extern void blk_queue_alignment_offset(struct request_queue *q,
unsigned int alignment);
extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
extern void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt);
extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
extern void blk_set_queue_depth(struct request_queue *q, unsigned int depth);
extern void blk_set_default_limits(struct queue_limits *lim);
extern void blk_set_stacking_limits(struct queue_limits *lim);
extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
sector_t offset);
extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
sector_t offset);
extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
sector_t offset);
extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
extern void blk_queue_dma_pad(struct request_queue *, unsigned int);
extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
extern int blk_queue_dma_drain(struct request_queue *q,
dma_drain_needed_fn *dma_drain_needed,
void *buf, unsigned int size);
block: add lld busy state exporting interface This patch adds an new interface, blk_lld_busy(), to check lld's busy state from the block layer. blk_lld_busy() calls down into low-level drivers for the checking if the drivers set q->lld_busy_fn() using blk_queue_lld_busy(). This resolves a performance problem on request stacking devices below. Some drivers like scsi mid layer stop dispatching request when they detect busy state on its low-level device like host/target/device. It allows other requests to stay in the I/O scheduler's queue for a chance of merging. Request stacking drivers like request-based dm should follow the same logic. However, there is no generic interface for the stacked device to check if the underlying device(s) are busy. If the request stacking driver dispatches and submits requests to the busy underlying device, the requests will stay in the underlying device's queue without a chance of merging. This causes performance problem on burst I/O load. With this patch, busy state of the underlying device is exported via q->lld_busy_fn(). So the request stacking driver can check it and stop dispatching requests if busy. The underlying device driver must return the busy state appropriately: 1: when the device driver can't process requests immediately. 0: when the device driver can process requests immediately, including abnormal situations where the device driver needs to kill all requests. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-01 21:12:15 +07:00
extern void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn);
extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
extern void blk_queue_virt_boundary(struct request_queue *, unsigned long);
extern void blk_queue_prep_rq(struct request_queue *, prep_rq_fn *pfn);
extern void blk_queue_unprep_rq(struct request_queue *, unprep_rq_fn *ufn);
extern void blk_queue_dma_alignment(struct request_queue *, int);
extern void blk_queue_update_dma_alignment(struct request_queue *, int);
extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
extern void blk_queue_flush_queueable(struct request_queue *q, bool queueable);
extern void blk_queue_write_cache(struct request_queue *q, bool enabled, bool fua);
/*
* Number of physical segments as sent to the device.
*
* Normally this is the number of discontiguous data segments sent by the
* submitter. But for data-less command like discard we might have no
* actual data segments submitted, but the driver might have to add it's
* own special payload. In that case we still return 1 here so that this
* special payload will be mapped.
*/
static inline unsigned short blk_rq_nr_phys_segments(struct request *rq)
{
if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
return 1;
return rq->nr_phys_segments;
}
/*
* Number of discard segments (or ranges) the driver needs to fill in.
* Each discard bio merged into a request is counted as one segment.
*/
static inline unsigned short blk_rq_nr_discard_segments(struct request *rq)
{
return max_t(unsigned short, rq->nr_phys_segments, 1);
}
extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *);
extern void blk_dump_rq_flags(struct request *, char *);
extern long nr_blockdev_pages(void);
bool __must_check blk_get_queue(struct request_queue *);
struct request_queue *blk_alloc_queue(gfp_t);
struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id,
spinlock_t *lock);
extern void blk_put_queue(struct request_queue *);
extern void blk_set_queue_dying(struct request_queue *);
/*
* block layer runtime pm functions
*/
#ifdef CONFIG_PM
extern void blk_pm_runtime_init(struct request_queue *q, struct device *dev);
extern int blk_pre_runtime_suspend(struct request_queue *q);
extern void blk_post_runtime_suspend(struct request_queue *q, int err);
extern void blk_pre_runtime_resume(struct request_queue *q);
extern void blk_post_runtime_resume(struct request_queue *q, int err);
extern void blk_set_runtime_active(struct request_queue *q);
#else
static inline void blk_pm_runtime_init(struct request_queue *q,
struct device *dev) {}
static inline int blk_pre_runtime_suspend(struct request_queue *q)
{
return -ENOSYS;
}
static inline void blk_post_runtime_suspend(struct request_queue *q, int err) {}
static inline void blk_pre_runtime_resume(struct request_queue *q) {}
static inline void blk_post_runtime_resume(struct request_queue *q, int err) {}
static inline void blk_set_runtime_active(struct request_queue *q) {}
#endif
/*
* blk_plug permits building a queue of related requests by holding the I/O
* fragments for a short period. This allows merging of sequential requests
* into single larger request. As the requests are moved from a per-task list to
* the device's request_queue in a batch, this results in improved scalability
* as the lock contention for request_queue lock is reduced.
*
* It is ok not to disable preemption when adding the request to the plug list
* or when attempting a merge, because blk_schedule_flush_list() will only flush
* the plug list when the task sleeps by itself. For details, please see
* schedule() where blk_schedule_flush_plug() is called.
*/
struct blk_plug {
struct list_head list; /* requests */
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
struct list_head mq_list; /* blk-mq requests */
struct list_head cb_list; /* md requires an unplug callback */
};
#define BLK_MAX_REQUEST_COUNT 16
#define BLK_PLUG_FLUSH_SIZE (128 * 1024)
struct blk_plug_cb;
typedef void (*blk_plug_cb_fn)(struct blk_plug_cb *, bool);
struct blk_plug_cb {
struct list_head list;
blk_plug_cb_fn callback;
void *data;
};
extern struct blk_plug_cb *blk_check_plugged(blk_plug_cb_fn unplug,
void *data, int size);
extern void blk_start_plug(struct blk_plug *);
extern void blk_finish_plug(struct blk_plug *);
extern void blk_flush_plug_list(struct blk_plug *, bool);
static inline void blk_flush_plug(struct task_struct *tsk)
{
struct blk_plug *plug = tsk->plug;
if (plug)
blk_flush_plug_list(plug, false);
}
static inline void blk_schedule_flush_plug(struct task_struct *tsk)
{
struct blk_plug *plug = tsk->plug;
if (plug)
blk_flush_plug_list(plug, true);
}
static inline bool blk_needs_flush_plug(struct task_struct *tsk)
{
struct blk_plug *plug = tsk->plug;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 15:20:05 +07:00
return plug &&
(!list_empty(&plug->list) ||
!list_empty(&plug->mq_list) ||
!list_empty(&plug->cb_list));
}
/*
* tag stuff
*/
extern int blk_queue_start_tag(struct request_queue *, struct request *);
extern struct request *blk_queue_find_tag(struct request_queue *, int);
extern void blk_queue_end_tag(struct request_queue *, struct request *);
extern int blk_queue_init_tags(struct request_queue *, int, struct blk_queue_tag *, int);
extern void blk_queue_free_tags(struct request_queue *);
extern int blk_queue_resize_tags(struct request_queue *, int);
extern struct blk_queue_tag *blk_init_tags(int, int);
extern void blk_free_tags(struct blk_queue_tag *);
static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt,
int tag)
{
if (unlikely(bqt == NULL || tag >= bqt->real_max_depth))
return NULL;
return bqt->tag_index[tag];
}
extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *);
extern int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, struct page *page);
#define BLKDEV_DISCARD_SECURE (1 << 0) /* issue a secure erase */
extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, unsigned long flags);
extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, int flags,
struct bio **biop);
#define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
#define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
extern int __blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, struct bio **biop,
unsigned flags);
extern int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, unsigned flags);
static inline int sb_issue_discard(struct super_block *sb, sector_t block,
sector_t nr_blocks, gfp_t gfp_mask, unsigned long flags)
{
2018-03-15 05:48:06 +07:00
return blkdev_issue_discard(sb->s_bdev,
block << (sb->s_blocksize_bits -
SECTOR_SHIFT),
nr_blocks << (sb->s_blocksize_bits -
SECTOR_SHIFT),
gfp_mask, flags);
}
static inline int sb_issue_zeroout(struct super_block *sb, sector_t block,
sector_t nr_blocks, gfp_t gfp_mask)
{
return blkdev_issue_zeroout(sb->s_bdev,
2018-03-15 05:48:06 +07:00
block << (sb->s_blocksize_bits -
SECTOR_SHIFT),
nr_blocks << (sb->s_blocksize_bits -
SECTOR_SHIFT),
gfp_mask, 0);
}
extern int blk_verify_command(unsigned char *cmd, fmode_t mode);
enum blk_default_limits {
BLK_MAX_SEGMENTS = 128,
BLK_SAFE_MAX_SECTORS = 255,
BLK_DEF_MAX_SECTORS = 2560,
BLK_MAX_SEGMENT_SIZE = 65536,
BLK_SEG_BOUNDARY_MASK = 0xFFFFFFFFUL,
};
block: fix setting of max_segment_size and seg_boundary mask Fix setting of max_segment_size and seg_boundary mask for stacked md/dm devices. When stacking devices (LVM over MD over SCSI) some of the request queue parameters are not set up correctly in some cases by default, namely max_segment_size and and seg_boundary mask. If you create MD device over SCSI, these attributes are zeroed. Problem become when there is over this mapping next device-mapper mapping - queue attributes are set in DM this way: request_queue max_segment_size seg_boundary_mask SCSI 65536 0xffffffff MD RAID1 0 0 LVM 65536 -1 (64bit) Unfortunately bio_add_page (resp. bio_phys_segments) calculates number of physical segments according to these parameters. During the generic_make_request() is segment cout recalculated and can increase bio->bi_phys_segments count over the allowed limit. (After bio_clone() in stack operation.) Thi is specially problem in CCISS driver, where it produce OOPS here BUG_ON(creq->nr_phys_segments > MAXSGENTRIES); (MAXSEGENTRIES is 31 by default.) Sometimes even this command is enough to cause oops: dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10 This command generates bios with 250 sectors, allocated in 32 4k-pages (last page uses only 1024 bytes). For LVM layer, it allocates bio with 31 segments (still OK for CCISS), unfortunatelly on lower layer it is recalculated to 32 segments and this violates CCISS restriction and triggers BUG_ON(). The patch tries to fix it by: * initializing attributes above in queue request constructor blk_queue_make_request() * make sure that blk_queue_stack_limits() inherits setting (DM uses its own function to set the limits because it blk_queue_stack_limits() was introduced later. It should probably switch to use generic stack limit function too.) * sets the default seg_boundary value in one place (blkdev.h) * use this mask as default in DM (instead of -1, which differs in 64bit) Bugs related to this: https://bugzilla.redhat.com/show_bug.cgi?id=471639 http://bugzilla.kernel.org/show_bug.cgi?id=8672 Signed-off-by: Milan Broz <mbroz@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Cc: Neil Brown <neilb@suse.de> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tejun Heo <htejun@gmail.com> Cc: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 18:55:08 +07:00
static inline unsigned long queue_segment_boundary(struct request_queue *q)
{
return q->limits.seg_boundary_mask;
}
static inline unsigned long queue_virt_boundary(struct request_queue *q)
{
return q->limits.virt_boundary_mask;
}
static inline unsigned int queue_max_sectors(struct request_queue *q)
{
return q->limits.max_sectors;
}
static inline unsigned int queue_max_hw_sectors(struct request_queue *q)
{
return q->limits.max_hw_sectors;
}
static inline unsigned short queue_max_segments(struct request_queue *q)
{
return q->limits.max_segments;
}
static inline unsigned short queue_max_discard_segments(struct request_queue *q)
{
return q->limits.max_discard_segments;
}
static inline unsigned int queue_max_segment_size(struct request_queue *q)
{
return q->limits.max_segment_size;
}
static inline unsigned short queue_logical_block_size(struct request_queue *q)
{
int retval = 512;
if (q && q->limits.logical_block_size)
retval = q->limits.logical_block_size;
return retval;
}
static inline unsigned short bdev_logical_block_size(struct block_device *bdev)
{
return queue_logical_block_size(bdev_get_queue(bdev));
}
static inline unsigned int queue_physical_block_size(struct request_queue *q)
{
return q->limits.physical_block_size;
}
static inline unsigned int bdev_physical_block_size(struct block_device *bdev)
{
return queue_physical_block_size(bdev_get_queue(bdev));
}
static inline unsigned int queue_io_min(struct request_queue *q)
{
return q->limits.io_min;
}
static inline int bdev_io_min(struct block_device *bdev)
{
return queue_io_min(bdev_get_queue(bdev));
}
static inline unsigned int queue_io_opt(struct request_queue *q)
{
return q->limits.io_opt;
}
static inline int bdev_io_opt(struct block_device *bdev)
{
return queue_io_opt(bdev_get_queue(bdev));
}
static inline int queue_alignment_offset(struct request_queue *q)
{
if (q->limits.misaligned)
return -1;
return q->limits.alignment_offset;
}
static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t sector)
{
unsigned int granularity = max(lim->physical_block_size, lim->io_min);
2018-03-15 05:48:06 +07:00
unsigned int alignment = sector_div(sector, granularity >> SECTOR_SHIFT)
<< SECTOR_SHIFT;
return (granularity + lim->alignment_offset - alignment) % granularity;
}
static inline int bdev_alignment_offset(struct block_device *bdev)
{
struct request_queue *q = bdev_get_queue(bdev);
if (q->limits.misaligned)
return -1;
if (bdev != bdev->bd_contains)
return bdev->bd_part->alignment_offset;
return q->limits.alignment_offset;
}
static inline int queue_discard_alignment(struct request_queue *q)
{
if (q->limits.discard_misaligned)
return -1;
return q->limits.discard_alignment;
}
static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector_t sector)
{
blk: avoid divide-by-zero with zero discard granularity Commit 8dd2cb7e880d ("block: discard granularity might not be power of 2") changed a couple of 'binary and' operations into modulus operations. Which turned the harmless case of a zero discard_granularity into a possible divide-by-zero. The code also had a much more subtle bug: it was doing the modulus of a value in bytes using 'sector_t'. That was always conceptually wrong, but didn't actually matter back when the code assumed a power-of-two granularity: we only looked at the low bits anyway. But with potentially arbitrary sector numbers, using a 'sector_t' to express bytes is very very wrong: depending on configuration it limits the starting offset of the device to just 32 bits, and any overflow would result in a wrong value if the modulus wasn't a power-of-two. So re-write the code to not only protect against the divide-by-zero, but to do the starting sector arithmetic in sectors, and using the proper types. [ For any mathematicians out there: it also looks monumentally stupid to do the 'modulo granularity' operation *twice*, never mind having a "+ granularity" in the second modulus op. But that's the easiest way to avoid negative values or overflow, and it is how the original code was done. ] Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Doug Anderson <dianders@chromium.org> Cc: Neil Brown <neilb@suse.de> Cc: Shaohua Li <shli@fusionio.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19 22:18:35 +07:00
unsigned int alignment, granularity, offset;
if (!lim->max_discard_sectors)
return 0;
blk: avoid divide-by-zero with zero discard granularity Commit 8dd2cb7e880d ("block: discard granularity might not be power of 2") changed a couple of 'binary and' operations into modulus operations. Which turned the harmless case of a zero discard_granularity into a possible divide-by-zero. The code also had a much more subtle bug: it was doing the modulus of a value in bytes using 'sector_t'. That was always conceptually wrong, but didn't actually matter back when the code assumed a power-of-two granularity: we only looked at the low bits anyway. But with potentially arbitrary sector numbers, using a 'sector_t' to express bytes is very very wrong: depending on configuration it limits the starting offset of the device to just 32 bits, and any overflow would result in a wrong value if the modulus wasn't a power-of-two. So re-write the code to not only protect against the divide-by-zero, but to do the starting sector arithmetic in sectors, and using the proper types. [ For any mathematicians out there: it also looks monumentally stupid to do the 'modulo granularity' operation *twice*, never mind having a "+ granularity" in the second modulus op. But that's the easiest way to avoid negative values or overflow, and it is how the original code was done. ] Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Doug Anderson <dianders@chromium.org> Cc: Neil Brown <neilb@suse.de> Cc: Shaohua Li <shli@fusionio.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19 22:18:35 +07:00
/* Why are these in bytes, not sectors? */
2018-03-15 05:48:06 +07:00
alignment = lim->discard_alignment >> SECTOR_SHIFT;
granularity = lim->discard_granularity >> SECTOR_SHIFT;
blk: avoid divide-by-zero with zero discard granularity Commit 8dd2cb7e880d ("block: discard granularity might not be power of 2") changed a couple of 'binary and' operations into modulus operations. Which turned the harmless case of a zero discard_granularity into a possible divide-by-zero. The code also had a much more subtle bug: it was doing the modulus of a value in bytes using 'sector_t'. That was always conceptually wrong, but didn't actually matter back when the code assumed a power-of-two granularity: we only looked at the low bits anyway. But with potentially arbitrary sector numbers, using a 'sector_t' to express bytes is very very wrong: depending on configuration it limits the starting offset of the device to just 32 bits, and any overflow would result in a wrong value if the modulus wasn't a power-of-two. So re-write the code to not only protect against the divide-by-zero, but to do the starting sector arithmetic in sectors, and using the proper types. [ For any mathematicians out there: it also looks monumentally stupid to do the 'modulo granularity' operation *twice*, never mind having a "+ granularity" in the second modulus op. But that's the easiest way to avoid negative values or overflow, and it is how the original code was done. ] Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Doug Anderson <dianders@chromium.org> Cc: Neil Brown <neilb@suse.de> Cc: Shaohua Li <shli@fusionio.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19 22:18:35 +07:00
if (!granularity)
return 0;
/* Offset of the partition start in 'granularity' sectors */
offset = sector_div(sector, granularity);
/* And why do we do this modulus *again* in blkdev_issue_discard()? */
offset = (granularity + alignment - offset) % granularity;
/* Turn it back into bytes, gaah */
2018-03-15 05:48:06 +07:00
return offset << SECTOR_SHIFT;
}
static inline int bdev_discard_alignment(struct block_device *bdev)
{
struct request_queue *q = bdev_get_queue(bdev);
if (bdev != bdev->bd_contains)
return bdev->bd_part->discard_alignment;
return q->limits.discard_alignment;
}
static inline unsigned int bdev_write_same(struct block_device *bdev)
{
struct request_queue *q = bdev_get_queue(bdev);
if (q)
return q->limits.max_write_same_sectors;
return 0;
}
static inline unsigned int bdev_write_zeroes_sectors(struct block_device *bdev)
{
struct request_queue *q = bdev_get_queue(bdev);
if (q)
return q->limits.max_write_zeroes_sectors;
return 0;
}
static inline enum blk_zoned_model bdev_zoned_model(struct block_device *bdev)
{
struct request_queue *q = bdev_get_queue(bdev);
if (q)
return blk_queue_zoned_model(q);
return BLK_ZONED_NONE;
}
static inline bool bdev_is_zoned(struct block_device *bdev)
{
struct request_queue *q = bdev_get_queue(bdev);
if (q)
return blk_queue_is_zoned(q);
return false;
}
static inline unsigned int bdev_zone_sectors(struct block_device *bdev)
{
struct request_queue *q = bdev_get_queue(bdev);
if (q)
return blk_queue_zone_sectors(q);
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
return 0;
}
static inline int queue_dma_alignment(struct request_queue *q)
{
return q ? q->dma_alignment : 511;
}
static inline int blk_rq_aligned(struct request_queue *q, unsigned long addr,
unsigned int len)
{
unsigned int alignment = queue_dma_alignment(q) | q->dma_pad_mask;
return !(addr & alignment) && !(len & alignment);
}
/* assumes size > 256 */
static inline unsigned int blksize_bits(unsigned int size)
{
unsigned int bits = 8;
do {
bits++;
size >>= 1;
} while (size > 256);
return bits;
}
static inline unsigned int block_size(struct block_device *bdev)
{
return bdev->bd_block_size;
}
static inline bool queue_flush_queueable(struct request_queue *q)
{
return !test_bit(QUEUE_FLAG_FLUSH_NQ, &q->queue_flags);
}
typedef struct {struct page *v;} Sector;
unsigned char *read_dev_sector(struct block_device *, sector_t, Sector *);
static inline void put_dev_sector(Sector p)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(p.v);
}
static inline bool __bvec_gap_to_prev(struct request_queue *q,
struct bio_vec *bprv, unsigned int offset)
{
return offset ||
((bprv->bv_offset + bprv->bv_len) & queue_virt_boundary(q));
}
/*
* Check if adding a bio_vec after bprv with offset would create a gap in
* the SG list. Most drivers don't care about this, but some do.
*/
static inline bool bvec_gap_to_prev(struct request_queue *q,
struct bio_vec *bprv, unsigned int offset)
{
if (!queue_virt_boundary(q))
return false;
return __bvec_gap_to_prev(q, bprv, offset);
}
/*
* Check if the two bvecs from two bios can be merged to one segment.
* If yes, no need to check gap between the two bios since the 1st bio
* and the 1st bvec in the 2nd bio can be handled in one segment.
*/
static inline bool bios_segs_mergeable(struct request_queue *q,
struct bio *prev, struct bio_vec *prev_last_bv,
struct bio_vec *next_first_bv)
{
if (!BIOVEC_PHYS_MERGEABLE(prev_last_bv, next_first_bv))
return false;
if (!BIOVEC_SEG_BOUNDARY(q, prev_last_bv, next_first_bv))
return false;
if (prev->bi_seg_back_size + next_first_bv->bv_len >
queue_max_segment_size(q))
return false;
return true;
}
static inline bool bio_will_gap(struct request_queue *q,
struct request *prev_rq,
struct bio *prev,
struct bio *next)
{
if (bio_has_data(prev) && queue_virt_boundary(q)) {
struct bio_vec pb, nb;
/*
* don't merge if the 1st bio starts with non-zero
* offset, otherwise it is quite difficult to respect
* sg gap limit. We work hard to merge a huge number of small
* single bios in case of mkfs.
*/
if (prev_rq)
bio_get_first_bvec(prev_rq->bio, &pb);
else
bio_get_first_bvec(prev, &pb);
if (pb.bv_offset)
return true;
/*
* We don't need to worry about the situation that the
* merged segment ends in unaligned virt boundary:
*
* - if 'pb' ends aligned, the merged segment ends aligned
* - if 'pb' ends unaligned, the next bio must include
* one single bvec of 'nb', otherwise the 'nb' can't
* merge with 'pb'
*/
bio_get_last_bvec(prev, &pb);
bio_get_first_bvec(next, &nb);
if (!bios_segs_mergeable(q, prev, &pb, &nb))
return __bvec_gap_to_prev(q, &pb, nb.bv_offset);
}
return false;
}
static inline bool req_gap_back_merge(struct request *req, struct bio *bio)
{
return bio_will_gap(req->q, req, req->biotail, bio);
}
static inline bool req_gap_front_merge(struct request *req, struct bio *bio)
{
return bio_will_gap(req->q, NULL, bio, req->bio);
}
int kblockd_schedule_work(struct work_struct *work);
int kblockd_schedule_work_on(int cpu, struct work_struct *work);
int kblockd_mod_delayed_work_on(int cpu, struct delayed_work *dwork, unsigned long delay);
#define MODULE_ALIAS_BLOCKDEV(major,minor) \
MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor))
#define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \
MODULE_ALIAS("block-major-" __stringify(major) "-*")
#if defined(CONFIG_BLK_DEV_INTEGRITY)
enum blk_integrity_flags {
BLK_INTEGRITY_VERIFY = 1 << 0,
BLK_INTEGRITY_GENERATE = 1 << 1,
BLK_INTEGRITY_DEVICE_CAPABLE = 1 << 2,
BLK_INTEGRITY_IP_CHECKSUM = 1 << 3,
};
struct blk_integrity_iter {
void *prot_buf;
void *data_buf;
sector_t seed;
unsigned int data_size;
unsigned short interval;
const char *disk_name;
};
typedef blk_status_t (integrity_processing_fn) (struct blk_integrity_iter *);
struct blk_integrity_profile {
integrity_processing_fn *generate_fn;
integrity_processing_fn *verify_fn;
const char *name;
};
extern void blk_integrity_register(struct gendisk *, struct blk_integrity *);
extern void blk_integrity_unregister(struct gendisk *);
extern int blk_integrity_compare(struct gendisk *, struct gendisk *);
extern int blk_rq_map_integrity_sg(struct request_queue *, struct bio *,
struct scatterlist *);
extern int blk_rq_count_integrity_sg(struct request_queue *, struct bio *);
extern bool blk_integrity_merge_rq(struct request_queue *, struct request *,
struct request *);
extern bool blk_integrity_merge_bio(struct request_queue *, struct request *,
struct bio *);
static inline struct blk_integrity *blk_get_integrity(struct gendisk *disk)
{
struct blk_integrity *bi = &disk->queue->integrity;
if (!bi->profile)
return NULL;
return bi;
}
static inline
struct blk_integrity *bdev_get_integrity(struct block_device *bdev)
{
return blk_get_integrity(bdev->bd_disk);
}
static inline bool blk_integrity_rq(struct request *rq)
{
return rq->cmd_flags & REQ_INTEGRITY;
}
static inline void blk_queue_max_integrity_segments(struct request_queue *q,
unsigned int segs)
{
q->limits.max_integrity_segments = segs;
}
static inline unsigned short
queue_max_integrity_segments(struct request_queue *q)
{
return q->limits.max_integrity_segments;
}
static inline bool integrity_req_gap_back_merge(struct request *req,
struct bio *next)
{
struct bio_integrity_payload *bip = bio_integrity(req->bio);
struct bio_integrity_payload *bip_next = bio_integrity(next);
return bvec_gap_to_prev(req->q, &bip->bip_vec[bip->bip_vcnt - 1],
bip_next->bip_vec[0].bv_offset);
}
static inline bool integrity_req_gap_front_merge(struct request *req,
struct bio *bio)
{
struct bio_integrity_payload *bip = bio_integrity(bio);
struct bio_integrity_payload *bip_next = bio_integrity(req->bio);
return bvec_gap_to_prev(req->q, &bip->bip_vec[bip->bip_vcnt - 1],
bip_next->bip_vec[0].bv_offset);
}
/**
* bio_integrity_intervals - Return number of integrity intervals for a bio
* @bi: blk_integrity profile for device
* @sectors: Size of the bio in 512-byte sectors
*
* Description: The block layer calculates everything in 512 byte
* sectors but integrity metadata is done in terms of the data integrity
* interval size of the storage device. Convert the block layer sectors
* to the appropriate number of integrity intervals.
*/
static inline unsigned int bio_integrity_intervals(struct blk_integrity *bi,
unsigned int sectors)
{
return sectors >> (bi->interval_exp - 9);
}
static inline unsigned int bio_integrity_bytes(struct blk_integrity *bi,
unsigned int sectors)
{
return bio_integrity_intervals(bi, sectors) * bi->tuple_size;
}
#else /* CONFIG_BLK_DEV_INTEGRITY */
struct bio;
struct block_device;
struct gendisk;
struct blk_integrity;
static inline int blk_integrity_rq(struct request *rq)
{
return 0;
}
static inline int blk_rq_count_integrity_sg(struct request_queue *q,
struct bio *b)
{
return 0;
}
static inline int blk_rq_map_integrity_sg(struct request_queue *q,
struct bio *b,
struct scatterlist *s)
{
return 0;
}
static inline struct blk_integrity *bdev_get_integrity(struct block_device *b)
{
return NULL;
}
static inline struct blk_integrity *blk_get_integrity(struct gendisk *disk)
{
return NULL;
}
static inline int blk_integrity_compare(struct gendisk *a, struct gendisk *b)
{
return 0;
}
static inline void blk_integrity_register(struct gendisk *d,
struct blk_integrity *b)
{
}
static inline void blk_integrity_unregister(struct gendisk *d)
{
}
static inline void blk_queue_max_integrity_segments(struct request_queue *q,
unsigned int segs)
{
}
static inline unsigned short queue_max_integrity_segments(struct request_queue *q)
{
return 0;
}
static inline bool blk_integrity_merge_rq(struct request_queue *rq,
struct request *r1,
struct request *r2)
{
return true;
}
static inline bool blk_integrity_merge_bio(struct request_queue *rq,
struct request *r,
struct bio *b)
{
return true;
}
static inline bool integrity_req_gap_back_merge(struct request *req,
struct bio *next)
{
return false;
}
static inline bool integrity_req_gap_front_merge(struct request *req,
struct bio *bio)
{
return false;
}
static inline unsigned int bio_integrity_intervals(struct blk_integrity *bi,
unsigned int sectors)
{
return 0;
}
static inline unsigned int bio_integrity_bytes(struct blk_integrity *bi,
unsigned int sectors)
{
return 0;
}
#endif /* CONFIG_BLK_DEV_INTEGRITY */
struct block_device_operations {
int (*open) (struct block_device *, fmode_t);
void (*release) (struct gendisk *, fmode_t);
int (*rw_page)(struct block_device *, sector_t, struct page *, unsigned int);
int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
implement in-kernel gendisk events handling Currently, media presence polling for removeable block devices is done from userland. There are several issues with this. * Polling is done by periodically opening the device. For SCSI devices, the command sequence generated by such action involves a few different commands including TEST_UNIT_READY. This behavior, while perfectly legal, is different from Windows which only issues single command, GET_EVENT_STATUS_NOTIFICATION. Unfortunately, some ATAPI devices lock up after being periodically queried such command sequences. * There is no reliable and unintrusive way for a userland program to tell whether the target device is safe for media presence polling. For example, polling for media presence during an on-going burning session can make it fail. The polling program can avoid this by opening the device with O_EXCL but then it risks making a valid exclusive user of the device fail w/ -EBUSY. * Userland polling is unnecessarily heavy and in-kernel implementation is lighter and better coordinated (workqueue, timer slack). This patch implements framework for in-kernel disk event handling, which includes media presence polling. * bdops->check_events() is added, which supercedes ->media_changed(). It should check whether there's any pending event and return if so. Currently, two events are defined - DISK_EVENT_MEDIA_CHANGE and DISK_EVENT_EJECT_REQUEST. ->check_events() is guaranteed not to be called parallelly. * gendisk->events and ->async_events are added. These should be initialized by block driver before passing the device to add_disk(). The former contains the mask of all supported events and the latter the mask of all events which the device can report without polling. /sys/block/*/events[_async] export these to userland. * Kernel parameter block.events_dfl_poll_msecs controls the system polling interval (default is 0 which means disable) and /sys/block/*/events_poll_msecs control polling intervals for individual devices (default is -1 meaning use system setting). Note that if a device can report all supported events asynchronously and its polling interval isn't explicitly set, the device won't be polled regardless of the system polling interval. * If a device is opened exclusively with write access, event checking is automatically disabled until all write exclusive accesses are released. * There are event 'clearing' events. For example, both of currently defined events are cleared after the device has been successfully opened. This information is passed to ->check_events() callback using @clearing argument as a hint. * Event checking is always performed from system_nrt_wq and timer slack is set to 25% for polling. * Nothing changes for drivers which implement ->media_changed() but not ->check_events(). Going forward, all drivers will be converted to ->check_events() and ->media_change() will be dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-09 02:57:37 +07:00
unsigned int (*check_events) (struct gendisk *disk,
unsigned int clearing);
/* ->media_changed() is DEPRECATED, use ->check_events() instead */
int (*media_changed) (struct gendisk *);
void (*unlock_native_capacity) (struct gendisk *);
int (*revalidate_disk) (struct gendisk *);
int (*getgeo)(struct block_device *, struct hd_geometry *);
/* this callback is with swap_lock and sometimes page table lock held */
void (*swap_slot_free_notify) (struct block_device *, unsigned long);
struct module *owner;
const struct pr_ops *pr_ops;
};
extern int __blkdev_driver_ioctl(struct block_device *, fmode_t, unsigned int,
unsigned long);
extern int bdev_read_page(struct block_device *, sector_t, struct page *);
extern int bdev_write_page(struct block_device *, sector_t, struct page *,
struct writeback_control *);
block: introduce zoned block devices zone write locking Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21 13:43:38 +07:00
#ifdef CONFIG_BLK_DEV_ZONED
bool blk_req_needs_zone_write_lock(struct request *rq);
void __blk_req_zone_write_lock(struct request *rq);
void __blk_req_zone_write_unlock(struct request *rq);
static inline void blk_req_zone_write_lock(struct request *rq)
{
if (blk_req_needs_zone_write_lock(rq))
__blk_req_zone_write_lock(rq);
}
static inline void blk_req_zone_write_unlock(struct request *rq)
{
if (rq->rq_flags & RQF_ZONE_WRITE_LOCKED)
__blk_req_zone_write_unlock(rq);
}
static inline bool blk_req_zone_is_write_locked(struct request *rq)
{
return rq->q->seq_zones_wlock &&
test_bit(blk_rq_zone_no(rq), rq->q->seq_zones_wlock);
}
static inline bool blk_req_can_dispatch_to_zone(struct request *rq)
{
if (!blk_req_needs_zone_write_lock(rq))
return true;
return !blk_req_zone_is_write_locked(rq);
}
#else
static inline bool blk_req_needs_zone_write_lock(struct request *rq)
{
return false;
}
static inline void blk_req_zone_write_lock(struct request *rq)
{
}
static inline void blk_req_zone_write_unlock(struct request *rq)
{
}
static inline bool blk_req_zone_is_write_locked(struct request *rq)
{
return false;
}
static inline bool blk_req_can_dispatch_to_zone(struct request *rq)
{
return true;
}
#endif /* CONFIG_BLK_DEV_ZONED */
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 01:45:40 +07:00
#else /* CONFIG_BLOCK */
struct block_device;
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 01:45:40 +07:00
/*
* stubs for when the block layer is configured out
*/
#define buffer_heads_over_limit 0
static inline long nr_blockdev_pages(void)
{
return 0;
}
struct blk_plug {
};
static inline void blk_start_plug(struct blk_plug *plug)
{
}
static inline void blk_finish_plug(struct blk_plug *plug)
{
}
static inline void blk_flush_plug(struct task_struct *task)
{
}
static inline void blk_schedule_flush_plug(struct task_struct *task)
{
}
static inline bool blk_needs_flush_plug(struct task_struct *tsk)
{
return false;
}
static inline int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
sector_t *error_sector)
{
return 0;
}
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 01:45:40 +07:00
#endif /* CONFIG_BLOCK */
#endif