linux_dsm_epyc7002/net/mac80211/ieee80211_i.h

1154 lines
34 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007-2008 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef IEEE80211_I_H
#define IEEE80211_I_H
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/if_ether.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/etherdevice.h>
#include <net/cfg80211.h>
#include <net/iw_handler.h>
#include <net/mac80211.h>
#include "key.h"
#include "sta_info.h"
struct ieee80211_local;
/* Maximum number of broadcast/multicast frames to buffer when some of the
* associated stations are using power saving. */
#define AP_MAX_BC_BUFFER 128
/* Maximum number of frames buffered to all STAs, including multicast frames.
* Note: increasing this limit increases the potential memory requirement. Each
* frame can be up to about 2 kB long. */
#define TOTAL_MAX_TX_BUFFER 512
/* Required encryption head and tailroom */
#define IEEE80211_ENCRYPT_HEADROOM 8
#define IEEE80211_ENCRYPT_TAILROOM 18
/* IEEE 802.11 (Ch. 9.5 Defragmentation) requires support for concurrent
* reception of at least three fragmented frames. This limit can be increased
* by changing this define, at the cost of slower frame reassembly and
* increased memory use (about 2 kB of RAM per entry). */
#define IEEE80211_FRAGMENT_MAX 4
/*
* Time after which we ignore scan results and no longer report/use
* them in any way.
*/
#define IEEE80211_SCAN_RESULT_EXPIRE (10 * HZ)
#define TU_TO_EXP_TIME(x) (jiffies + usecs_to_jiffies((x) * 1024))
struct ieee80211_fragment_entry {
unsigned long first_frag_time;
unsigned int seq;
unsigned int rx_queue;
unsigned int last_frag;
unsigned int extra_len;
struct sk_buff_head skb_list;
int ccmp; /* Whether fragments were encrypted with CCMP */
u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
};
struct ieee80211_bss {
/* Yes, this is a hack */
struct cfg80211_bss cbss;
/* don't want to look up all the time */
size_t ssid_len;
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 dtim_period;
bool wmm_used;
unsigned long last_probe_resp;
#ifdef CONFIG_MAC80211_MESH
u8 *mesh_id;
size_t mesh_id_len;
u8 *mesh_cfg;
#endif
#define IEEE80211_MAX_SUPP_RATES 32
u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
size_t supp_rates_len;
/*
* During assocation, we save an ERP value from a probe response so
* that we can feed ERP info to the driver when handling the
* association completes. these fields probably won't be up-to-date
* otherwise, you probably don't want to use them.
*/
bool has_erp_value;
u8 erp_value;
};
static inline u8 *bss_mesh_cfg(struct ieee80211_bss *bss)
{
#ifdef CONFIG_MAC80211_MESH
return bss->mesh_cfg;
#endif
return NULL;
}
static inline u8 *bss_mesh_id(struct ieee80211_bss *bss)
{
#ifdef CONFIG_MAC80211_MESH
return bss->mesh_id;
#endif
return NULL;
}
static inline u8 bss_mesh_id_len(struct ieee80211_bss *bss)
{
#ifdef CONFIG_MAC80211_MESH
return bss->mesh_id_len;
#endif
return 0;
}
typedef unsigned __bitwise__ ieee80211_tx_result;
#define TX_CONTINUE ((__force ieee80211_tx_result) 0u)
#define TX_DROP ((__force ieee80211_tx_result) 1u)
#define TX_QUEUED ((__force ieee80211_tx_result) 2u)
#define IEEE80211_TX_FRAGMENTED BIT(0)
#define IEEE80211_TX_UNICAST BIT(1)
#define IEEE80211_TX_PS_BUFFERED BIT(2)
struct ieee80211_tx_data {
struct sk_buff *skb;
struct net_device *dev;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
struct ieee80211_key *key;
struct ieee80211_channel *channel;
u16 ethertype;
unsigned int flags;
};
typedef unsigned __bitwise__ ieee80211_rx_result;
#define RX_CONTINUE ((__force ieee80211_rx_result) 0u)
#define RX_DROP_UNUSABLE ((__force ieee80211_rx_result) 1u)
#define RX_DROP_MONITOR ((__force ieee80211_rx_result) 2u)
#define RX_QUEUED ((__force ieee80211_rx_result) 3u)
#define IEEE80211_RX_IN_SCAN BIT(0)
/* frame is destined to interface currently processed (incl. multicast frames) */
#define IEEE80211_RX_RA_MATCH BIT(1)
#define IEEE80211_RX_AMSDU BIT(2)
#define IEEE80211_RX_CMNTR_REPORTED BIT(3)
#define IEEE80211_RX_FRAGMENTED BIT(4)
struct ieee80211_rx_data {
struct sk_buff *skb;
struct net_device *dev;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
struct ieee80211_key *key;
struct ieee80211_rx_status *status;
struct ieee80211_rate *rate;
unsigned int flags;
int sent_ps_buffered;
int queue;
u32 tkip_iv32;
u16 tkip_iv16;
};
struct beacon_data {
u8 *head, *tail;
int head_len, tail_len;
int dtim_period;
};
struct ieee80211_if_ap {
struct beacon_data *beacon;
struct list_head vlans;
/* yes, this looks ugly, but guarantees that we can later use
* bitmap_empty :)
* NB: don't touch this bitmap, use sta_info_{set,clear}_tim_bit */
u8 tim[sizeof(unsigned long) * BITS_TO_LONGS(IEEE80211_MAX_AID + 1)];
struct sk_buff_head ps_bc_buf;
atomic_t num_sta_ps; /* number of stations in PS mode */
int dtim_count;
};
struct ieee80211_if_wds {
struct sta_info *sta;
u8 remote_addr[ETH_ALEN];
};
struct ieee80211_if_vlan {
struct list_head list;
};
struct mesh_stats {
__u32 fwded_frames; /* Mesh forwarded frames */
__u32 dropped_frames_ttl; /* Not transmitted since mesh_ttl == 0*/
__u32 dropped_frames_no_route; /* Not transmitted, no route found */
atomic_t estab_plinks;
};
#define PREQ_Q_F_START 0x1
#define PREQ_Q_F_REFRESH 0x2
struct mesh_preq_queue {
struct list_head list;
u8 dst[ETH_ALEN];
u8 flags;
};
/* flags used in struct ieee80211_if_managed.flags */
#define IEEE80211_STA_SSID_SET BIT(0)
#define IEEE80211_STA_BSSID_SET BIT(1)
#define IEEE80211_STA_PREV_BSSID_SET BIT(2)
#define IEEE80211_STA_AUTHENTICATED BIT(3)
#define IEEE80211_STA_ASSOCIATED BIT(4)
#define IEEE80211_STA_PROBEREQ_POLL BIT(5)
#define IEEE80211_STA_CREATE_IBSS BIT(6)
#define IEEE80211_STA_CONTROL_PORT BIT(7)
#define IEEE80211_STA_WMM_ENABLED BIT(8)
/* hole at 9, please re-use */
#define IEEE80211_STA_AUTO_SSID_SEL BIT(10)
#define IEEE80211_STA_AUTO_BSSID_SEL BIT(11)
#define IEEE80211_STA_AUTO_CHANNEL_SEL BIT(12)
#define IEEE80211_STA_PRIVACY_INVOKED BIT(13)
#define IEEE80211_STA_TKIP_WEP_USED BIT(14)
#define IEEE80211_STA_CSA_RECEIVED BIT(15)
#define IEEE80211_STA_MFP_ENABLED BIT(16)
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 18:39:22 +07:00
#define IEEE80211_STA_EXT_SME BIT(17)
/* flags for MLME request */
#define IEEE80211_STA_REQ_SCAN 0
#define IEEE80211_STA_REQ_AUTH 1
#define IEEE80211_STA_REQ_RUN 2
/* bitfield of allowed auth algs */
#define IEEE80211_AUTH_ALG_OPEN BIT(0)
#define IEEE80211_AUTH_ALG_SHARED_KEY BIT(1)
#define IEEE80211_AUTH_ALG_LEAP BIT(2)
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 18:39:22 +07:00
#define IEEE80211_AUTH_ALG_FT BIT(3)
struct ieee80211_if_managed {
struct timer_list timer;
struct timer_list chswitch_timer;
struct work_struct work;
struct work_struct chswitch_work;
struct work_struct beacon_loss_work;
u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
u8 ssid[IEEE80211_MAX_SSID_LEN];
size_t ssid_len;
enum {
IEEE80211_STA_MLME_DISABLED,
IEEE80211_STA_MLME_DIRECT_PROBE,
IEEE80211_STA_MLME_AUTHENTICATE,
IEEE80211_STA_MLME_ASSOCIATE,
IEEE80211_STA_MLME_ASSOCIATED,
} state;
u16 aid;
u16 ap_capab, capab;
u8 *extra_ie; /* to be added to the end of AssocReq */
size_t extra_ie_len;
/* The last AssocReq/Resp IEs */
u8 *assocreq_ies, *assocresp_ies;
size_t assocreq_ies_len, assocresp_ies_len;
struct sk_buff_head skb_queue;
int assoc_scan_tries; /* number of scans done pre-association */
int direct_probe_tries; /* retries for direct probes */
int auth_tries; /* retries for auth req */
int assoc_tries; /* retries for assoc req */
unsigned long timers_running; /* used for quiesce/restart */
bool powersave; /* powersave requested for this iface */
unsigned long request;
unsigned long last_probe;
unsigned long last_beacon;
unsigned int flags;
unsigned int auth_algs; /* bitfield of allowed auth algs */
int auth_alg; /* currently used IEEE 802.11 authentication algorithm */
int auth_transaction;
u32 beacon_crc;
enum {
IEEE80211_MFP_DISABLED,
IEEE80211_MFP_OPTIONAL,
IEEE80211_MFP_REQUIRED
} mfp; /* management frame protection */
int wmm_last_param_set;
/* Extra IE data for management frames */
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 18:39:22 +07:00
u8 *sme_auth_ie;
size_t sme_auth_ie_len;
};
enum ieee80211_ibss_request {
IEEE80211_IBSS_REQ_RUN = 0,
};
struct ieee80211_if_ibss {
struct timer_list timer;
struct work_struct work;
struct sk_buff_head skb_queue;
unsigned long request;
unsigned long last_scan_completed;
bool timer_running;
bool fixed_bssid;
bool fixed_channel;
u8 bssid[ETH_ALEN];
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 ssid_len, ie_len;
u8 *ie;
struct ieee80211_channel *channel;
unsigned long ibss_join_req;
/* probe response/beacon for IBSS */
struct sk_buff *presp, *skb;
enum {
IEEE80211_IBSS_MLME_SEARCH,
IEEE80211_IBSS_MLME_JOINED,
} state;
};
struct ieee80211_if_mesh {
struct work_struct work;
struct timer_list housekeeping_timer;
struct timer_list mesh_path_timer;
struct sk_buff_head skb_queue;
unsigned long timers_running;
bool housekeeping;
u8 mesh_id[IEEE80211_MAX_MESH_ID_LEN];
size_t mesh_id_len;
/* Active Path Selection Protocol Identifier */
u8 mesh_pp_id[4];
/* Active Path Selection Metric Identifier */
u8 mesh_pm_id[4];
/* Congestion Control Mode Identifier */
u8 mesh_cc_id[4];
/* Local mesh Destination Sequence Number */
u32 dsn;
/* Last used PREQ ID */
u32 preq_id;
atomic_t mpaths;
/* Timestamp of last DSN update */
unsigned long last_dsn_update;
/* Timestamp of last DSN sent */
unsigned long last_preq;
struct mesh_rmc *rmc;
spinlock_t mesh_preq_queue_lock;
struct mesh_preq_queue preq_queue;
int preq_queue_len;
struct mesh_stats mshstats;
struct mesh_config mshcfg;
u32 mesh_seqnum;
bool accepting_plinks;
};
#ifdef CONFIG_MAC80211_MESH
#define IEEE80211_IFSTA_MESH_CTR_INC(msh, name) \
do { (msh)->mshstats.name++; } while (0)
#else
#define IEEE80211_IFSTA_MESH_CTR_INC(msh, name) \
do { } while (0)
#endif
/**
* enum ieee80211_sub_if_data_flags - virtual interface flags
*
* @IEEE80211_SDATA_ALLMULTI: interface wants all multicast packets
* @IEEE80211_SDATA_PROMISC: interface is promisc
* @IEEE80211_SDATA_OPERATING_GMODE: operating in G-only mode
* @IEEE80211_SDATA_DONT_BRIDGE_PACKETS: bridge packets between
* associated stations and deliver multicast frames both
* back to wireless media and to the local net stack.
*/
enum ieee80211_sub_if_data_flags {
IEEE80211_SDATA_ALLMULTI = BIT(0),
IEEE80211_SDATA_PROMISC = BIT(1),
IEEE80211_SDATA_OPERATING_GMODE = BIT(2),
IEEE80211_SDATA_DONT_BRIDGE_PACKETS = BIT(3),
};
struct ieee80211_sub_if_data {
struct list_head list;
struct wireless_dev wdev;
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 04:01:55 +07:00
/* keys */
struct list_head key_list;
struct net_device *dev;
struct ieee80211_local *local;
unsigned int flags;
int drop_unencrypted;
/*
* keep track of whether the HT opmode (stored in
* vif.bss_info.ht_operation_mode) is valid.
*/
bool ht_opmode_valid;
/* Fragment table for host-based reassembly */
struct ieee80211_fragment_entry fragments[IEEE80211_FRAGMENT_MAX];
unsigned int fragment_next;
#define NUM_DEFAULT_KEYS 4
#define NUM_DEFAULT_MGMT_KEYS 2
struct ieee80211_key *keys[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
struct ieee80211_key *default_key;
struct ieee80211_key *default_mgmt_key;
u16 sequence_number;
/*
* AP this belongs to: self in AP mode and
* corresponding AP in VLAN mode, NULL for
* all others (might be needed later in IBSS)
*/
struct ieee80211_if_ap *bss;
int force_unicast_rateidx; /* forced TX rateidx for unicast frames */
int max_ratectrl_rateidx; /* max TX rateidx for rate control */
union {
struct ieee80211_if_ap ap;
struct ieee80211_if_wds wds;
struct ieee80211_if_vlan vlan;
struct ieee80211_if_managed mgd;
struct ieee80211_if_ibss ibss;
#ifdef CONFIG_MAC80211_MESH
struct ieee80211_if_mesh mesh;
#endif
u32 mntr_flags;
} u;
#ifdef CONFIG_MAC80211_DEBUGFS
struct dentry *debugfsdir;
union {
struct {
struct dentry *drop_unencrypted;
struct dentry *state;
struct dentry *bssid;
struct dentry *prev_bssid;
struct dentry *ssid_len;
struct dentry *aid;
struct dentry *ap_capab;
struct dentry *capab;
struct dentry *extra_ie_len;
struct dentry *auth_tries;
struct dentry *assoc_tries;
struct dentry *auth_algs;
struct dentry *auth_alg;
struct dentry *auth_transaction;
struct dentry *flags;
struct dentry *force_unicast_rateidx;
struct dentry *max_ratectrl_rateidx;
} sta;
struct {
struct dentry *drop_unencrypted;
struct dentry *num_sta_ps;
struct dentry *dtim_count;
struct dentry *force_unicast_rateidx;
struct dentry *max_ratectrl_rateidx;
struct dentry *num_buffered_multicast;
} ap;
struct {
struct dentry *drop_unencrypted;
struct dentry *peer;
struct dentry *force_unicast_rateidx;
struct dentry *max_ratectrl_rateidx;
} wds;
struct {
struct dentry *drop_unencrypted;
struct dentry *force_unicast_rateidx;
struct dentry *max_ratectrl_rateidx;
} vlan;
struct {
struct dentry *mode;
} monitor;
} debugfs;
struct {
struct dentry *default_key;
struct dentry *default_mgmt_key;
} common_debugfs;
#ifdef CONFIG_MAC80211_MESH
struct dentry *mesh_stats_dir;
struct {
struct dentry *fwded_frames;
struct dentry *dropped_frames_ttl;
struct dentry *dropped_frames_no_route;
struct dentry *estab_plinks;
struct timer_list mesh_path_timer;
} mesh_stats;
struct dentry *mesh_config_dir;
struct {
struct dentry *dot11MeshRetryTimeout;
struct dentry *dot11MeshConfirmTimeout;
struct dentry *dot11MeshHoldingTimeout;
struct dentry *dot11MeshMaxRetries;
struct dentry *dot11MeshTTL;
struct dentry *auto_open_plinks;
struct dentry *dot11MeshMaxPeerLinks;
struct dentry *dot11MeshHWMPactivePathTimeout;
struct dentry *dot11MeshHWMPpreqMinInterval;
struct dentry *dot11MeshHWMPnetDiameterTraversalTime;
struct dentry *dot11MeshHWMPmaxPREQretries;
struct dentry *path_refresh_time;
struct dentry *min_discovery_timeout;
} mesh_config;
#endif
#endif
/* must be last, dynamically sized area in this! */
struct ieee80211_vif vif;
};
static inline
struct ieee80211_sub_if_data *vif_to_sdata(struct ieee80211_vif *p)
{
return container_of(p, struct ieee80211_sub_if_data, vif);
}
static inline void
ieee80211_sdata_set_mesh_id(struct ieee80211_sub_if_data *sdata,
u8 mesh_id_len, u8 *mesh_id)
{
#ifdef CONFIG_MAC80211_MESH
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
ifmsh->mesh_id_len = mesh_id_len;
memcpy(ifmsh->mesh_id, mesh_id, mesh_id_len);
#else
WARN_ON(1);
#endif
}
enum {
IEEE80211_RX_MSG = 1,
IEEE80211_TX_STATUS_MSG = 2,
IEEE80211_DELBA_MSG = 3,
IEEE80211_ADDBA_MSG = 4,
};
enum queue_stop_reason {
IEEE80211_QUEUE_STOP_REASON_DRIVER,
IEEE80211_QUEUE_STOP_REASON_PS,
mac80211: fix aggregation for hardware with ampdu queues Hardware with AMPDU queues currently has broken aggregation. This patch fixes it by making all A-MPDUs go over the regular AC queues, but keeping track of the hardware queues in mac80211. As a first rough version, it actually stops the AC queue for extended periods of time, which can be removed by adding buffering internal to mac80211, but is currently not a huge problem because people rarely use multiple TIDs that are in the same AC (and iwlwifi currently doesn't operate as AP). This is a short-term fix, my current medium-term plan, which I hope to execute soon as well, but am not sure can finish before .30, looks like this: 1) rework the internal queuing layer in mac80211 that we use for fragments if the driver stopped queue in the middle of a fragmented frame to be able to queue more frames at once (rather than just a single frame with its fragments) 2) instead of stopping the entire AC queue, queue up the frames in a per-station/per-TID queue during aggregation session initiation, when the session has come up take all those frames and put them onto the queue from 1) 3) push the ampdu queue layer abstraction this patch introduces in mac80211 into the driver, and remove the virtual queue stuff from mac80211 again This plan will probably also affect ath9k in that mac80211 queues the frames instead of passing them down, even when there are no ampdu queues. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-12 06:51:53 +07:00
IEEE80211_QUEUE_STOP_REASON_CSA,
IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
IEEE80211_QUEUE_STOP_REASON_SUSPEND,
IEEE80211_QUEUE_STOP_REASON_PENDING,
IEEE80211_QUEUE_STOP_REASON_SKB_ADD,
};
struct ieee80211_master_priv {
struct ieee80211_local *local;
};
struct ieee80211_local {
/* embed the driver visible part.
* don't cast (use the static inlines below), but we keep
* it first anyway so they become a no-op */
struct ieee80211_hw hw;
const struct ieee80211_ops *ops;
unsigned long queue_stop_reasons[IEEE80211_MAX_QUEUES];
mac80211: fix aggregation for hardware with ampdu queues Hardware with AMPDU queues currently has broken aggregation. This patch fixes it by making all A-MPDUs go over the regular AC queues, but keeping track of the hardware queues in mac80211. As a first rough version, it actually stops the AC queue for extended periods of time, which can be removed by adding buffering internal to mac80211, but is currently not a huge problem because people rarely use multiple TIDs that are in the same AC (and iwlwifi currently doesn't operate as AP). This is a short-term fix, my current medium-term plan, which I hope to execute soon as well, but am not sure can finish before .30, looks like this: 1) rework the internal queuing layer in mac80211 that we use for fragments if the driver stopped queue in the middle of a fragmented frame to be able to queue more frames at once (rather than just a single frame with its fragments) 2) instead of stopping the entire AC queue, queue up the frames in a per-station/per-TID queue during aggregation session initiation, when the session has come up take all those frames and put them onto the queue from 1) 3) push the ampdu queue layer abstraction this patch introduces in mac80211 into the driver, and remove the virtual queue stuff from mac80211 again This plan will probably also affect ath9k in that mac80211 queues the frames instead of passing them down, even when there are no ampdu queues. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-12 06:51:53 +07:00
/* also used to protect ampdu_ac_queue and amdpu_ac_stop_refcnt */
spinlock_t queue_stop_reason_lock;
mac80211: fix aggregation for hardware with ampdu queues Hardware with AMPDU queues currently has broken aggregation. This patch fixes it by making all A-MPDUs go over the regular AC queues, but keeping track of the hardware queues in mac80211. As a first rough version, it actually stops the AC queue for extended periods of time, which can be removed by adding buffering internal to mac80211, but is currently not a huge problem because people rarely use multiple TIDs that are in the same AC (and iwlwifi currently doesn't operate as AP). This is a short-term fix, my current medium-term plan, which I hope to execute soon as well, but am not sure can finish before .30, looks like this: 1) rework the internal queuing layer in mac80211 that we use for fragments if the driver stopped queue in the middle of a fragmented frame to be able to queue more frames at once (rather than just a single frame with its fragments) 2) instead of stopping the entire AC queue, queue up the frames in a per-station/per-TID queue during aggregation session initiation, when the session has come up take all those frames and put them onto the queue from 1) 3) push the ampdu queue layer abstraction this patch introduces in mac80211 into the driver, and remove the virtual queue stuff from mac80211 again This plan will probably also affect ath9k in that mac80211 queues the frames instead of passing them down, even when there are no ampdu queues. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-12 06:51:53 +07:00
struct net_device *mdev; /* wmaster# - "master" 802.11 device */
int open_count;
int monitors, cooked_mntrs;
/* number of interfaces with corresponding FIF_ flags */
int fif_fcsfail, fif_plcpfail, fif_control, fif_other_bss;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 12:29:23 +07:00
unsigned int filter_flags; /* FIF_* */
struct iw_statistics wstats;
bool tim_in_locked_section; /* see ieee80211_beacon_get() */
/*
* suspended is true if we finished all the suspend _and_ we have
* not yet come up from resume. This is to be used by mac80211
* to ensure driver sanity during suspend and mac80211's own
* sanity. It can eventually be used for WoW as well.
*/
bool suspended;
/*
* quiescing is true during the suspend process _only_ to
* ease timer cancelling etc.
*/
bool quiescing;
int tx_headroom; /* required headroom for hardware/radiotap */
/* Tasklet and skb queue to process calls from IRQ mode. All frames
* added to skb_queue will be processed, but frames in
* skb_queue_unreliable may be dropped if the total length of these
* queues increases over the limit. */
#define IEEE80211_IRQSAFE_QUEUE_LIMIT 128
struct tasklet_struct tasklet;
struct sk_buff_head skb_queue;
struct sk_buff_head skb_queue_unreliable;
/* Station data */
/*
* The lock only protects the list, hash, timer and counter
* against manipulation, reads are done in RCU. Additionally,
* the lock protects each BSS's TIM bitmap.
*/
spinlock_t sta_lock;
unsigned long num_sta;
struct list_head sta_list;
struct sta_info *sta_hash[STA_HASH_SIZE];
struct timer_list sta_cleanup;
struct sk_buff_head pending[IEEE80211_MAX_QUEUES];
struct tasklet_struct tx_pending_tasklet;
/*
* This lock is used to prevent concurrent A-MPDU
* session start/stop processing, this thus also
* synchronises the ->ampdu_action() callback to
* drivers and limits it to one at a time.
*/
spinlock_t ampdu_lock;
/* number of interfaces with corresponding IFF_ flags */
atomic_t iff_allmultis, iff_promiscs;
struct rate_control_ref *rate_ctrl;
struct crypto_blkcipher *wep_tx_tfm;
struct crypto_blkcipher *wep_rx_tfm;
u32 wep_iv;
/* see iface.c */
struct list_head interfaces;
struct mutex iflist_mtx;
/*
* Key lock, protects sdata's key_list and sta_info's
* key pointers (write access, they're RCU.)
*/
spinlock_t key_lock;
/* Scanning and BSS list */
struct mutex scan_mtx;
bool sw_scanning, hw_scanning;
struct cfg80211_ssid scan_ssid;
struct cfg80211_scan_request int_scan_req;
struct cfg80211_scan_request *scan_req;
struct ieee80211_channel *scan_channel;
const u8 *orig_ies;
int orig_ies_len;
int scan_channel_idx;
int scan_ies_len;
enum { SCAN_SET_CHANNEL, SCAN_SEND_PROBE } scan_state;
struct delayed_work scan_work;
struct ieee80211_sub_if_data *scan_sdata;
enum nl80211_channel_type oper_channel_type;
struct ieee80211_channel *oper_channel, *csa_channel;
/* SNMP counters */
/* dot11CountersTable */
u32 dot11TransmittedFragmentCount;
u32 dot11MulticastTransmittedFrameCount;
u32 dot11FailedCount;
u32 dot11RetryCount;
u32 dot11MultipleRetryCount;
u32 dot11FrameDuplicateCount;
u32 dot11ReceivedFragmentCount;
u32 dot11MulticastReceivedFrameCount;
u32 dot11TransmittedFrameCount;
#ifdef CONFIG_MAC80211_LEDS
int tx_led_counter, rx_led_counter;
struct led_trigger *tx_led, *rx_led, *assoc_led, *radio_led;
char tx_led_name[32], rx_led_name[32],
assoc_led_name[32], radio_led_name[32];
#endif
#ifdef CONFIG_MAC80211_DEBUGFS
struct work_struct sta_debugfs_add;
#endif
#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
/* TX/RX handler statistics */
unsigned int tx_handlers_drop;
unsigned int tx_handlers_queued;
unsigned int tx_handlers_drop_unencrypted;
unsigned int tx_handlers_drop_fragment;
unsigned int tx_handlers_drop_wep;
unsigned int tx_handlers_drop_not_assoc;
unsigned int tx_handlers_drop_unauth_port;
unsigned int rx_handlers_drop;
unsigned int rx_handlers_queued;
unsigned int rx_handlers_drop_nullfunc;
unsigned int rx_handlers_drop_defrag;
unsigned int rx_handlers_drop_short;
unsigned int rx_handlers_drop_passive_scan;
unsigned int tx_expand_skb_head;
unsigned int tx_expand_skb_head_cloned;
unsigned int rx_expand_skb_head;
unsigned int rx_expand_skb_head2;
unsigned int rx_handlers_fragments;
unsigned int tx_status_drop;
#define I802_DEBUG_INC(c) (c)++
#else /* CONFIG_MAC80211_DEBUG_COUNTERS */
#define I802_DEBUG_INC(c) do { } while (0)
#endif /* CONFIG_MAC80211_DEBUG_COUNTERS */
int total_ps_buffered; /* total number of all buffered unicast and
* multicast packets for power saving stations
*/
int wifi_wme_noack_test;
unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
bool pspolling;
/*
* PS can only be enabled when we have exactly one managed
* interface (and monitors) in PS, this then points there.
*/
struct ieee80211_sub_if_data *ps_sdata;
struct work_struct dynamic_ps_enable_work;
struct work_struct dynamic_ps_disable_work;
struct timer_list dynamic_ps_timer;
struct notifier_block network_latency_notifier;
int user_power_level; /* in dBm */
int power_constr_level; /* in dBm */
struct work_struct restart_work;
#ifdef CONFIG_MAC80211_DEBUGFS
struct local_debugfsdentries {
struct dentry *rcdir;
struct dentry *rcname;
struct dentry *frequency;
struct dentry *total_ps_buffered;
struct dentry *wep_iv;
struct dentry *tsf;
struct dentry *queues;
struct dentry *reset;
struct dentry *noack;
struct dentry *statistics;
struct local_debugfsdentries_statsdentries {
struct dentry *transmitted_fragment_count;
struct dentry *multicast_transmitted_frame_count;
struct dentry *failed_count;
struct dentry *retry_count;
struct dentry *multiple_retry_count;
struct dentry *frame_duplicate_count;
struct dentry *received_fragment_count;
struct dentry *multicast_received_frame_count;
struct dentry *transmitted_frame_count;
struct dentry *wep_undecryptable_count;
struct dentry *num_scans;
#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
struct dentry *tx_handlers_drop;
struct dentry *tx_handlers_queued;
struct dentry *tx_handlers_drop_unencrypted;
struct dentry *tx_handlers_drop_fragment;
struct dentry *tx_handlers_drop_wep;
struct dentry *tx_handlers_drop_not_assoc;
struct dentry *tx_handlers_drop_unauth_port;
struct dentry *rx_handlers_drop;
struct dentry *rx_handlers_queued;
struct dentry *rx_handlers_drop_nullfunc;
struct dentry *rx_handlers_drop_defrag;
struct dentry *rx_handlers_drop_short;
struct dentry *rx_handlers_drop_passive_scan;
struct dentry *tx_expand_skb_head;
struct dentry *tx_expand_skb_head_cloned;
struct dentry *rx_expand_skb_head;
struct dentry *rx_expand_skb_head2;
struct dentry *rx_handlers_fragments;
struct dentry *tx_status_drop;
#endif
struct dentry *dot11ACKFailureCount;
struct dentry *dot11RTSFailureCount;
struct dentry *dot11FCSErrorCount;
struct dentry *dot11RTSSuccessCount;
} stats;
struct dentry *stations;
struct dentry *keys;
} debugfs;
#endif
};
static inline struct ieee80211_sub_if_data *
IEEE80211_DEV_TO_SUB_IF(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
BUG_ON(!local || local->mdev == dev);
return netdev_priv(dev);
}
/* this struct represents 802.11n's RA/TID combination */
struct ieee80211_ra_tid {
u8 ra[ETH_ALEN];
u16 tid;
};
/* Parsed Information Elements */
struct ieee802_11_elems {
u8 *ie_start;
size_t total_len;
/* pointers to IEs */
u8 *ssid;
u8 *supp_rates;
u8 *fh_params;
u8 *ds_params;
u8 *cf_params;
struct ieee80211_tim_ie *tim;
u8 *ibss_params;
u8 *challenge;
u8 *wpa;
u8 *rsn;
u8 *erp_info;
u8 *ext_supp_rates;
u8 *wmm_info;
u8 *wmm_param;
struct ieee80211_ht_cap *ht_cap_elem;
struct ieee80211_ht_info *ht_info_elem;
u8 *mesh_config;
u8 *mesh_id;
u8 *peer_link;
u8 *preq;
u8 *prep;
u8 *perr;
u8 *ch_switch_elem;
u8 *country_elem;
u8 *pwr_constr_elem;
u8 *quiet_elem; /* first quite element */
u8 *timeout_int;
/* length of them, respectively */
u8 ssid_len;
u8 supp_rates_len;
u8 fh_params_len;
u8 ds_params_len;
u8 cf_params_len;
u8 tim_len;
u8 ibss_params_len;
u8 challenge_len;
u8 wpa_len;
u8 rsn_len;
u8 erp_info_len;
u8 ext_supp_rates_len;
u8 wmm_info_len;
u8 wmm_param_len;
u8 mesh_config_len;
u8 mesh_id_len;
u8 peer_link_len;
u8 preq_len;
u8 prep_len;
u8 perr_len;
u8 ch_switch_elem_len;
u8 country_elem_len;
u8 pwr_constr_elem_len;
u8 quiet_elem_len;
u8 num_of_quiet_elem; /* can be more the one */
u8 timeout_int_len;
};
static inline struct ieee80211_local *hw_to_local(
struct ieee80211_hw *hw)
{
return container_of(hw, struct ieee80211_local, hw);
}
static inline struct ieee80211_hw *local_to_hw(
struct ieee80211_local *local)
{
return &local->hw;
}
static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr)
{
return compare_ether_addr(raddr, addr) == 0 ||
is_broadcast_ether_addr(raddr);
}
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed);
void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx);
void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
u32 changed);
void ieee80211_configure_filter(struct ieee80211_local *local);
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata);
/* wireless extensions */
extern const struct iw_handler_def ieee80211_iw_handler_def;
/* STA code */
void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata);
ieee80211_rx_result ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb,
struct ieee80211_rx_status *rx_status);
int ieee80211_sta_commit(struct ieee80211_sub_if_data *sdata);
int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len);
int ieee80211_sta_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len);
int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid);
void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata);
int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason);
int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason);
void ieee80211_send_pspoll(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata);
void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency);
int ieee80211_max_network_latency(struct notifier_block *nb,
unsigned long data, void *dummy);
void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
struct ieee80211_channel_sw_ie *sw_elem,
struct ieee80211_bss *bss);
void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata);
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata);
/* IBSS code */
void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local);
void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata);
ieee80211_rx_result
ieee80211_ibss_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
struct ieee80211_rx_status *rx_status);
struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
u8 *bssid, u8 *addr, u32 supp_rates);
int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
struct cfg80211_ibss_params *params);
int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata);
void ieee80211_ibss_quiesce(struct ieee80211_sub_if_data *sdata);
void ieee80211_ibss_restart(struct ieee80211_sub_if_data *sdata);
/* scan/BSS handling */
void ieee80211_scan_work(struct work_struct *work);
int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
const u8 *ssid, u8 ssid_len);
int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
struct cfg80211_scan_request *req);
int ieee80211_scan_results(struct ieee80211_local *local,
struct iw_request_info *info,
char *buf, size_t len);
void ieee80211_scan_cancel(struct ieee80211_local *local);
ieee80211_rx_result
ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb,
struct ieee80211_rx_status *rx_status);
int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata,
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 18:39:22 +07:00
const char *ie, size_t len);
void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local);
struct ieee80211_bss *
ieee80211_bss_info_update(struct ieee80211_local *local,
struct ieee80211_rx_status *rx_status,
struct ieee80211_mgmt *mgmt,
size_t len,
struct ieee802_11_elems *elems,
struct ieee80211_channel *channel,
bool beacon);
struct ieee80211_bss *
ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,
u8 *ssid, u8 ssid_len);
void ieee80211_rx_bss_put(struct ieee80211_local *local,
struct ieee80211_bss *bss);
void ieee80211_rx_bss_remove(struct ieee80211_sub_if_data *sdata, u8 *bssid,
int freq, u8 *ssid, u8 ssid_len);
/* interface handling */
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
struct net_device **new_dev, enum nl80211_iftype type,
struct vif_params *params);
int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type);
void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
void ieee80211_remove_interfaces(struct ieee80211_local *local);
mac80211: tell driver when idle When we aren't doing anything in mac80211, we can turn off much of the hardware, depending on the driver/hw. Not doing anything, aka being idle, means: * no monitor interfaces * no AP/mesh/wds interfaces * any station interfaces are in DISABLED state * any IBSS interfaces aren't trying to be in a network * we aren't trying to scan By creating a new function that verifies these conditions and calling it at strategic points where the states of those conditions change, we can easily make mac80211 tell the driver when we are idle to save power. Additionally, this fixes a small quirk where a recalculated powersave state is passed to the driver even if the hardware is about to stopped completely. This patch intentionally doesn't touch radio_enabled because that is currently implemented to be a soft rfkill which is inappropriate here when we need to be able to wake up with low latency. One thing I'm not entirely sure about is this: phy0: device no longer idle - in use wlan0: direct probe to AP 00:11:24:91:07:4d try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:11:24:91:07:4d wlan0: authenticated > phy0: device now idle > phy0: device no longer idle - in use wlan0: associate with AP 00:11:24:91:07:4d wlan0: RX AssocResp from 00:11:24:91:07:4d (capab=0x401 status=0 aid=1) wlan0: associated Is it appropriate to go into idle state for a short time when we have just authenticated, but not associated yet? This happens only with the userspace SME, because we cannot really know how long it will wait before asking us to associate. Would going idle after a short timeout be more appropriate? We may need to revisit this, depending on what happens. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-29 17:26:17 +07:00
u32 __ieee80211_recalc_idle(struct ieee80211_local *local);
void ieee80211_recalc_idle(struct ieee80211_local *local);
/* tx handling */
void ieee80211_clear_tx_pending(struct ieee80211_local *local);
void ieee80211_tx_pending(unsigned long data);
int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev);
int ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev);
int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev);
/* HT */
void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
struct ieee80211_ht_cap *ht_cap_ie,
struct ieee80211_sta_ht_cap *ht_cap);
void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn);
void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
const u8 *da, u16 tid,
u16 initiator, u16 reason_code);
void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *da,
u16 tid, u16 initiator, u16 reason);
void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
u16 initiator, u16 reason);
void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta);
void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
struct ieee80211_mgmt *mgmt, size_t len);
void ieee80211_process_addba_resp(struct ieee80211_local *local,
struct sta_info *sta,
struct ieee80211_mgmt *mgmt,
size_t len);
void ieee80211_process_addba_request(struct ieee80211_local *local,
struct sta_info *sta,
struct ieee80211_mgmt *mgmt,
size_t len);
int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
enum ieee80211_back_parties initiator);
/* Spectrum management */
void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len);
/* Suspend/resume and hw reconfiguration */
int ieee80211_reconfig(struct ieee80211_local *local);
#ifdef CONFIG_PM
int __ieee80211_suspend(struct ieee80211_hw *hw);
static inline int __ieee80211_resume(struct ieee80211_hw *hw)
{
return ieee80211_reconfig(hw_to_local(hw));
}
#else
static inline int __ieee80211_suspend(struct ieee80211_hw *hw)
{
return 0;
}
static inline int __ieee80211_resume(struct ieee80211_hw *hw)
{
return 0;
}
#endif
/* utility functions/constants */
extern void *mac80211_wiphy_privid; /* for wiphy privid */
u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
enum nl80211_iftype type);
int ieee80211_frame_duration(struct ieee80211_local *local, size_t len,
int rate, int erp, int short_preamble);
void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int keyidx,
struct ieee80211_hdr *hdr, const u8 *tsc);
void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata);
void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
int encrypt);
void ieee802_11_parse_elems(u8 *start, size_t len,
struct ieee802_11_elems *elems);
u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
struct ieee802_11_elems *elems,
u64 filter, u32 crc);
u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band);
void ieee80211_dynamic_ps_enable_work(struct work_struct *work);
void ieee80211_dynamic_ps_disable_work(struct work_struct *work);
void ieee80211_dynamic_ps_timer(unsigned long data);
void ieee80211_send_nullfunc(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
int powersave);
void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
struct ieee80211_hdr *hdr);
void ieee80211_beacon_loss_work(struct work_struct *work);
void ieee80211_wake_queues_by_reason(struct ieee80211_hw *hw,
enum queue_stop_reason reason);
void ieee80211_stop_queues_by_reason(struct ieee80211_hw *hw,
enum queue_stop_reason reason);
mac80211: fix aggregation for hardware with ampdu queues Hardware with AMPDU queues currently has broken aggregation. This patch fixes it by making all A-MPDUs go over the regular AC queues, but keeping track of the hardware queues in mac80211. As a first rough version, it actually stops the AC queue for extended periods of time, which can be removed by adding buffering internal to mac80211, but is currently not a huge problem because people rarely use multiple TIDs that are in the same AC (and iwlwifi currently doesn't operate as AP). This is a short-term fix, my current medium-term plan, which I hope to execute soon as well, but am not sure can finish before .30, looks like this: 1) rework the internal queuing layer in mac80211 that we use for fragments if the driver stopped queue in the middle of a fragmented frame to be able to queue more frames at once (rather than just a single frame with its fragments) 2) instead of stopping the entire AC queue, queue up the frames in a per-station/per-TID queue during aggregation session initiation, when the session has come up take all those frames and put them onto the queue from 1) 3) push the ampdu queue layer abstraction this patch introduces in mac80211 into the driver, and remove the virtual queue stuff from mac80211 again This plan will probably also affect ath9k in that mac80211 queues the frames instead of passing them down, even when there are no ampdu queues. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-12 06:51:53 +07:00
void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
enum queue_stop_reason reason);
void ieee80211_stop_queue_by_reason(struct ieee80211_hw *hw, int queue,
enum queue_stop_reason reason);
void ieee80211_add_pending_skb(struct ieee80211_local *local,
struct sk_buff *skb);
int ieee80211_add_pending_skbs(struct ieee80211_local *local,
struct sk_buff_head *skbs);
void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
u16 transaction, u16 auth_alg,
u8 *extra, size_t extra_len,
const u8 *bssid, int encrypt);
int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
const u8 *ie, size_t ie_len);
void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
const u8 *ssid, size_t ssid_len,
const u8 *ie, size_t ie_len);
void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
const size_t supp_rates_len,
const u8 *supp_rates);
u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
struct ieee802_11_elems *elems,
enum ieee80211_band band);
#ifdef CONFIG_MAC80211_NOINLINE
#define debug_noinline noinline
#else
#define debug_noinline
#endif
#endif /* IEEE80211_I_H */