2019-06-04 15:11:32 +07:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0-only */
|
2007-12-16 16:02:48 +07:00
|
|
|
#ifndef __KVM_HOST_H
|
|
|
|
#define __KVM_HOST_H
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
2007-10-18 19:39:10 +07:00
|
|
|
#include <linux/hardirq.h>
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/mutex.h>
|
|
|
|
#include <linux/spinlock.h>
|
2007-05-27 14:46:52 +07:00
|
|
|
#include <linux/signal.h>
|
|
|
|
#include <linux/sched.h>
|
2011-11-24 08:12:59 +07:00
|
|
|
#include <linux/bug.h>
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
#include <linux/mm.h>
|
2011-10-10 22:46:15 +07:00
|
|
|
#include <linux/mmu_notifier.h>
|
2007-07-11 22:17:21 +07:00
|
|
|
#include <linux/preempt.h>
|
2008-11-24 13:32:53 +07:00
|
|
|
#include <linux/msi.h>
|
2010-11-09 23:02:49 +07:00
|
|
|
#include <linux/slab.h>
|
2018-05-15 18:37:37 +07:00
|
|
|
#include <linux/vmalloc.h>
|
2010-11-19 00:09:08 +07:00
|
|
|
#include <linux/rcupdate.h>
|
2011-09-12 16:26:22 +07:00
|
|
|
#include <linux/ratelimit.h>
|
2012-08-03 14:39:59 +07:00
|
|
|
#include <linux/err.h>
|
2013-01-21 06:50:22 +07:00
|
|
|
#include <linux/irqflags.h>
|
2013-05-16 06:21:38 +07:00
|
|
|
#include <linux/context_tracking.h>
|
2015-09-18 21:29:43 +07:00
|
|
|
#include <linux/irqbypass.h>
|
2016-02-19 15:46:39 +07:00
|
|
|
#include <linux/swait.h>
|
2017-02-20 18:06:21 +07:00
|
|
|
#include <linux/refcount.h>
|
2019-04-11 16:16:47 +07:00
|
|
|
#include <linux/nospec.h>
|
Detach sched.h from mm.h
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.
This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
getting them indirectly
Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
they don't need sched.h
b) sched.h stops being dependency for significant number of files:
on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
after patch it's only 3744 (-8.3%).
Cross-compile tested on
all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
alpha alpha-up
arm
i386 i386-up i386-defconfig i386-allnoconfig
ia64 ia64-up
m68k
mips
parisc parisc-up
powerpc powerpc-up
s390 s390-up
sparc sparc-up
sparc64 sparc64-up
um-x86_64
x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig
as well as my two usual configs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 04:22:52 +07:00
|
|
|
#include <asm/signal.h>
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
|
|
|
|
#include <linux/kvm.h>
|
2007-02-19 19:37:47 +07:00
|
|
|
#include <linux/kvm_para.h>
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
|
2007-12-16 16:02:48 +07:00
|
|
|
#include <linux/kvm_types.h>
|
2007-12-04 04:30:23 +07:00
|
|
|
|
2007-12-16 16:02:48 +07:00
|
|
|
#include <asm/kvm_host.h>
|
2007-12-14 08:41:22 +07:00
|
|
|
|
2016-05-09 23:13:37 +07:00
|
|
|
#ifndef KVM_MAX_VCPU_ID
|
|
|
|
#define KVM_MAX_VCPU_ID KVM_MAX_VCPUS
|
|
|
|
#endif
|
|
|
|
|
2012-08-21 09:58:45 +07:00
|
|
|
/*
|
|
|
|
* The bit 16 ~ bit 31 of kvm_memory_region::flags are internally used
|
|
|
|
* in kvm, other bits are visible for userspace which are defined in
|
|
|
|
* include/linux/kvm_h.
|
|
|
|
*/
|
|
|
|
#define KVM_MEMSLOT_INVALID (1UL << 16)
|
|
|
|
|
KVM: Explicitly define the "memslot update in-progress" bit
KVM uses bit 0 of the memslots generation as an "update in-progress"
flag, which is used by x86 to prevent caching MMIO access while the
memslots are changing. Although the intended behavior is flag-like,
e.g. MMIO sptes intentionally drop the in-progress bit so as to avoid
caching data from in-flux memslots, the implementation oftentimes treats
the bit as part of the generation number itself, e.g. incrementing the
generation increments twice, once to set the flag and once to clear it.
Prior to commit 4bd518f1598d ("KVM: use separate generations for
each address space"), incorporating the "update in-progress" bit into
the generation number largely made sense, e.g. "real" generations are
even, "bogus" generations are odd, most code doesn't need to be aware of
the bit, etc...
Now that unique memslots generation numbers are assigned to each address
space, stealthing the in-progress status into the generation number
results in a wide variety of subtle code, e.g. kvm_create_vm() jumps
over bit 0 when initializing the memslots generation without any hint as
to why.
Explicitly define the flag and convert as much code as possible (which
isn't much) to actually treat it like a flag. This paves the way for
eventually using a different bit for "update in-progress" so that it can
be a flag in truth instead of a awkward extension to the generation
number.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 04:01:14 +07:00
|
|
|
/*
|
2019-02-06 04:01:18 +07:00
|
|
|
* Bit 63 of the memslot generation number is an "update in-progress flag",
|
KVM: Explicitly define the "memslot update in-progress" bit
KVM uses bit 0 of the memslots generation as an "update in-progress"
flag, which is used by x86 to prevent caching MMIO access while the
memslots are changing. Although the intended behavior is flag-like,
e.g. MMIO sptes intentionally drop the in-progress bit so as to avoid
caching data from in-flux memslots, the implementation oftentimes treats
the bit as part of the generation number itself, e.g. incrementing the
generation increments twice, once to set the flag and once to clear it.
Prior to commit 4bd518f1598d ("KVM: use separate generations for
each address space"), incorporating the "update in-progress" bit into
the generation number largely made sense, e.g. "real" generations are
even, "bogus" generations are odd, most code doesn't need to be aware of
the bit, etc...
Now that unique memslots generation numbers are assigned to each address
space, stealthing the in-progress status into the generation number
results in a wide variety of subtle code, e.g. kvm_create_vm() jumps
over bit 0 when initializing the memslots generation without any hint as
to why.
Explicitly define the flag and convert as much code as possible (which
isn't much) to actually treat it like a flag. This paves the way for
eventually using a different bit for "update in-progress" so that it can
be a flag in truth instead of a awkward extension to the generation
number.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 04:01:14 +07:00
|
|
|
* e.g. is temporarily set for the duration of install_new_memslots().
|
|
|
|
* This flag effectively creates a unique generation number that is used to
|
|
|
|
* mark cached memslot data, e.g. MMIO accesses, as potentially being stale,
|
|
|
|
* i.e. may (or may not) have come from the previous memslots generation.
|
|
|
|
*
|
|
|
|
* This is necessary because the actual memslots update is not atomic with
|
|
|
|
* respect to the generation number update. Updating the generation number
|
|
|
|
* first would allow a vCPU to cache a spte from the old memslots using the
|
|
|
|
* new generation number, and updating the generation number after switching
|
|
|
|
* to the new memslots would allow cache hits using the old generation number
|
|
|
|
* to reference the defunct memslots.
|
|
|
|
*
|
|
|
|
* This mechanism is used to prevent getting hits in KVM's caches while a
|
|
|
|
* memslot update is in-progress, and to prevent cache hits *after* updating
|
|
|
|
* the actual generation number against accesses that were inserted into the
|
|
|
|
* cache *before* the memslots were updated.
|
|
|
|
*/
|
2019-02-06 04:01:18 +07:00
|
|
|
#define KVM_MEMSLOT_GEN_UPDATE_IN_PROGRESS BIT_ULL(63)
|
KVM: Explicitly define the "memslot update in-progress" bit
KVM uses bit 0 of the memslots generation as an "update in-progress"
flag, which is used by x86 to prevent caching MMIO access while the
memslots are changing. Although the intended behavior is flag-like,
e.g. MMIO sptes intentionally drop the in-progress bit so as to avoid
caching data from in-flux memslots, the implementation oftentimes treats
the bit as part of the generation number itself, e.g. incrementing the
generation increments twice, once to set the flag and once to clear it.
Prior to commit 4bd518f1598d ("KVM: use separate generations for
each address space"), incorporating the "update in-progress" bit into
the generation number largely made sense, e.g. "real" generations are
even, "bogus" generations are odd, most code doesn't need to be aware of
the bit, etc...
Now that unique memslots generation numbers are assigned to each address
space, stealthing the in-progress status into the generation number
results in a wide variety of subtle code, e.g. kvm_create_vm() jumps
over bit 0 when initializing the memslots generation without any hint as
to why.
Explicitly define the flag and convert as much code as possible (which
isn't much) to actually treat it like a flag. This paves the way for
eventually using a different bit for "update in-progress" so that it can
be a flag in truth instead of a awkward extension to the generation
number.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 04:01:14 +07:00
|
|
|
|
2012-10-24 13:07:59 +07:00
|
|
|
/* Two fragments for cross MMIO pages. */
|
|
|
|
#define KVM_MAX_MMIO_FRAGMENTS 2
|
2012-04-18 23:22:47 +07:00
|
|
|
|
2015-05-17 22:30:37 +07:00
|
|
|
#ifndef KVM_ADDRESS_SPACE_NUM
|
|
|
|
#define KVM_ADDRESS_SPACE_NUM 1
|
|
|
|
#endif
|
|
|
|
|
2012-08-03 14:43:51 +07:00
|
|
|
/*
|
|
|
|
* For the normal pfn, the highest 12 bits should be zero,
|
2012-10-16 19:10:59 +07:00
|
|
|
* so we can mask bit 62 ~ bit 52 to indicate the error pfn,
|
|
|
|
* mask bit 63 to indicate the noslot pfn.
|
2012-08-03 14:43:51 +07:00
|
|
|
*/
|
2012-10-16 19:10:59 +07:00
|
|
|
#define KVM_PFN_ERR_MASK (0x7ffULL << 52)
|
|
|
|
#define KVM_PFN_ERR_NOSLOT_MASK (0xfffULL << 52)
|
|
|
|
#define KVM_PFN_NOSLOT (0x1ULL << 63)
|
2012-08-03 14:43:51 +07:00
|
|
|
|
|
|
|
#define KVM_PFN_ERR_FAULT (KVM_PFN_ERR_MASK)
|
|
|
|
#define KVM_PFN_ERR_HWPOISON (KVM_PFN_ERR_MASK + 1)
|
2012-10-16 19:10:59 +07:00
|
|
|
#define KVM_PFN_ERR_RO_FAULT (KVM_PFN_ERR_MASK + 2)
|
2012-08-03 14:37:54 +07:00
|
|
|
|
2012-10-16 19:10:59 +07:00
|
|
|
/*
|
|
|
|
* error pfns indicate that the gfn is in slot but faild to
|
|
|
|
* translate it to pfn on host.
|
|
|
|
*/
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
static inline bool is_error_pfn(kvm_pfn_t pfn)
|
2012-08-03 14:39:59 +07:00
|
|
|
{
|
2012-08-03 14:43:51 +07:00
|
|
|
return !!(pfn & KVM_PFN_ERR_MASK);
|
2012-08-03 14:39:59 +07:00
|
|
|
}
|
|
|
|
|
2012-10-16 19:10:59 +07:00
|
|
|
/*
|
|
|
|
* error_noslot pfns indicate that the gfn can not be
|
|
|
|
* translated to pfn - it is not in slot or failed to
|
|
|
|
* translate it to pfn.
|
|
|
|
*/
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
static inline bool is_error_noslot_pfn(kvm_pfn_t pfn)
|
2012-08-03 14:39:59 +07:00
|
|
|
{
|
2012-10-16 19:10:59 +07:00
|
|
|
return !!(pfn & KVM_PFN_ERR_NOSLOT_MASK);
|
2012-08-03 14:39:59 +07:00
|
|
|
}
|
|
|
|
|
2012-10-16 19:10:59 +07:00
|
|
|
/* noslot pfn indicates that the gfn is not in slot. */
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
static inline bool is_noslot_pfn(kvm_pfn_t pfn)
|
2012-08-03 14:39:59 +07:00
|
|
|
{
|
2012-10-16 19:10:59 +07:00
|
|
|
return pfn == KVM_PFN_NOSLOT;
|
2012-08-03 14:39:59 +07:00
|
|
|
}
|
|
|
|
|
2013-07-26 20:04:07 +07:00
|
|
|
/*
|
|
|
|
* architectures with KVM_HVA_ERR_BAD other than PAGE_OFFSET (e.g. s390)
|
|
|
|
* provide own defines and kvm_is_error_hva
|
|
|
|
*/
|
|
|
|
#ifndef KVM_HVA_ERR_BAD
|
|
|
|
|
2012-08-21 10:02:22 +07:00
|
|
|
#define KVM_HVA_ERR_BAD (PAGE_OFFSET)
|
|
|
|
#define KVM_HVA_ERR_RO_BAD (PAGE_OFFSET + PAGE_SIZE)
|
2012-08-21 10:01:50 +07:00
|
|
|
|
|
|
|
static inline bool kvm_is_error_hva(unsigned long addr)
|
|
|
|
{
|
2012-08-21 10:02:22 +07:00
|
|
|
return addr >= PAGE_OFFSET;
|
2012-08-21 10:01:50 +07:00
|
|
|
}
|
|
|
|
|
2013-07-26 20:04:07 +07:00
|
|
|
#endif
|
|
|
|
|
2012-08-03 14:41:22 +07:00
|
|
|
#define KVM_ERR_PTR_BAD_PAGE (ERR_PTR(-ENOENT))
|
|
|
|
|
2012-08-03 14:43:51 +07:00
|
|
|
static inline bool is_error_page(struct page *page)
|
2012-08-03 14:41:22 +07:00
|
|
|
{
|
|
|
|
return IS_ERR(page);
|
|
|
|
}
|
|
|
|
|
2017-04-27 03:32:22 +07:00
|
|
|
#define KVM_REQUEST_MASK GENMASK(7,0)
|
|
|
|
#define KVM_REQUEST_NO_WAKEUP BIT(8)
|
2017-04-27 19:33:43 +07:00
|
|
|
#define KVM_REQUEST_WAIT BIT(9)
|
2007-06-07 23:18:30 +07:00
|
|
|
/*
|
2016-01-07 21:05:10 +07:00
|
|
|
* Architecture-independent vcpu->requests bit members
|
|
|
|
* Bits 4-7 are reserved for more arch-independent bits.
|
2007-06-07 23:18:30 +07:00
|
|
|
*/
|
2017-04-27 19:33:43 +07:00
|
|
|
#define KVM_REQ_TLB_FLUSH (0 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
|
|
|
|
#define KVM_REQ_MMU_RELOAD (1 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
|
|
|
|
#define KVM_REQ_PENDING_TIMER 2
|
|
|
|
#define KVM_REQ_UNHALT 3
|
2017-06-04 19:43:51 +07:00
|
|
|
#define KVM_REQUEST_ARCH_BASE 8
|
|
|
|
|
|
|
|
#define KVM_ARCH_REQ_FLAGS(nr, flags) ({ \
|
2019-12-10 01:31:43 +07:00
|
|
|
BUILD_BUG_ON((unsigned)(nr) >= (sizeof_field(struct kvm_vcpu, requests) * 8) - KVM_REQUEST_ARCH_BASE); \
|
2017-06-04 19:43:51 +07:00
|
|
|
(unsigned)(((nr) + KVM_REQUEST_ARCH_BASE) | (flags)); \
|
|
|
|
})
|
|
|
|
#define KVM_ARCH_REQ(nr) KVM_ARCH_REQ_FLAGS(nr, 0)
|
2016-01-07 21:00:53 +07:00
|
|
|
|
2012-09-22 00:58:03 +07:00
|
|
|
#define KVM_USERSPACE_IRQ_SOURCE_ID 0
|
|
|
|
#define KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID 1
|
2008-10-15 19:15:06 +07:00
|
|
|
|
2007-07-30 18:12:19 +07:00
|
|
|
extern struct kmem_cache *kvm_vcpu_cache;
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
|
2019-01-04 08:14:28 +07:00
|
|
|
extern struct mutex kvm_lock;
|
2013-04-06 02:20:30 +07:00
|
|
|
extern struct list_head vm_list;
|
|
|
|
|
2011-07-27 20:00:48 +07:00
|
|
|
struct kvm_io_range {
|
|
|
|
gpa_t addr;
|
|
|
|
int len;
|
|
|
|
struct kvm_io_device *dev;
|
|
|
|
};
|
|
|
|
|
2012-03-09 11:17:40 +07:00
|
|
|
#define NR_IOBUS_DEVS 1000
|
2012-03-09 11:17:32 +07:00
|
|
|
|
2007-06-01 01:08:53 +07:00
|
|
|
struct kvm_io_bus {
|
2013-05-25 05:44:15 +07:00
|
|
|
int dev_count;
|
|
|
|
int ioeventfd_count;
|
2012-03-09 11:17:32 +07:00
|
|
|
struct kvm_io_range range[];
|
2007-06-01 01:08:53 +07:00
|
|
|
};
|
|
|
|
|
2009-12-23 23:35:24 +07:00
|
|
|
enum kvm_bus {
|
|
|
|
KVM_MMIO_BUS,
|
|
|
|
KVM_PIO_BUS,
|
2013-02-28 18:33:19 +07:00
|
|
|
KVM_VIRTIO_CCW_NOTIFY_BUS,
|
KVM: VMX: speed up wildcard MMIO EVENTFD
With KVM, MMIO is much slower than PIO, due to the need to
do page walk and emulation. But with EPT, it does not have to be: we
know the address from the VMCS so if the address is unique, we can look
up the eventfd directly, bypassing emulation.
Unfortunately, this only works if userspace does not need to match on
access length and data. The implementation adds a separate FAST_MMIO
bus internally. This serves two purposes:
- minimize overhead for old userspace that does not use eventfd with lengtth = 0
- minimize disruption in other code (since we don't know the length,
devices on the MMIO bus only get a valid address in write, this
way we don't need to touch all devices to teach them to handle
an invalid length)
At the moment, this optimization only has effect for EPT on x86.
It will be possible to speed up MMIO for NPT and MMU using the same
idea in the future.
With this patch applied, on VMX MMIO EVENTFD is essentially as fast as PIO.
I was unable to detect any measureable slowdown to non-eventfd MMIO.
Making MMIO faster is important for the upcoming virtio 1.0 which
includes an MMIO signalling capability.
The idea was suggested by Peter Anvin. Lots of thanks to Gleb for
pre-review and suggestions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-01 01:50:44 +07:00
|
|
|
KVM_FAST_MMIO_BUS,
|
2009-12-23 23:35:24 +07:00
|
|
|
KVM_NR_BUSES
|
|
|
|
};
|
|
|
|
|
2015-03-26 21:39:28 +07:00
|
|
|
int kvm_io_bus_write(struct kvm_vcpu *vcpu, enum kvm_bus bus_idx, gpa_t addr,
|
2009-12-23 23:35:24 +07:00
|
|
|
int len, const void *val);
|
2015-03-26 21:39:28 +07:00
|
|
|
int kvm_io_bus_write_cookie(struct kvm_vcpu *vcpu, enum kvm_bus bus_idx,
|
|
|
|
gpa_t addr, int len, const void *val, long cookie);
|
|
|
|
int kvm_io_bus_read(struct kvm_vcpu *vcpu, enum kvm_bus bus_idx, gpa_t addr,
|
|
|
|
int len, void *val);
|
2011-07-27 20:00:48 +07:00
|
|
|
int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
|
|
|
|
int len, struct kvm_io_device *dev);
|
2017-03-24 00:24:19 +07:00
|
|
|
void kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
|
|
|
|
struct kvm_io_device *dev);
|
2016-07-15 18:43:26 +07:00
|
|
|
struct kvm_io_device *kvm_io_bus_get_dev(struct kvm *kvm, enum kvm_bus bus_idx,
|
|
|
|
gpa_t addr);
|
2007-06-01 01:08:53 +07:00
|
|
|
|
2010-10-14 16:22:46 +07:00
|
|
|
#ifdef CONFIG_KVM_ASYNC_PF
|
|
|
|
struct kvm_async_pf {
|
|
|
|
struct work_struct work;
|
|
|
|
struct list_head link;
|
|
|
|
struct list_head queue;
|
|
|
|
struct kvm_vcpu *vcpu;
|
|
|
|
struct mm_struct *mm;
|
|
|
|
gva_t gva;
|
|
|
|
unsigned long addr;
|
|
|
|
struct kvm_arch_async_pf arch;
|
2013-10-14 21:22:33 +07:00
|
|
|
bool wakeup_all;
|
2010-10-14 16:22:46 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
void kvm_clear_async_pf_completion_queue(struct kvm_vcpu *vcpu);
|
|
|
|
void kvm_check_async_pf_completion(struct kvm_vcpu *vcpu);
|
2013-06-06 20:32:37 +07:00
|
|
|
int kvm_setup_async_pf(struct kvm_vcpu *vcpu, gva_t gva, unsigned long hva,
|
2010-10-14 16:22:46 +07:00
|
|
|
struct kvm_arch_async_pf *arch);
|
2010-10-14 16:22:50 +07:00
|
|
|
int kvm_async_pf_wakeup_all(struct kvm_vcpu *vcpu);
|
2010-10-14 16:22:46 +07:00
|
|
|
#endif
|
|
|
|
|
2011-01-12 14:40:31 +07:00
|
|
|
enum {
|
|
|
|
OUTSIDE_GUEST_MODE,
|
|
|
|
IN_GUEST_MODE,
|
2012-05-14 19:44:06 +07:00
|
|
|
EXITING_GUEST_MODE,
|
|
|
|
READING_SHADOW_PAGE_TABLES,
|
2011-01-12 14:40:31 +07:00
|
|
|
};
|
|
|
|
|
2019-02-01 03:24:34 +07:00
|
|
|
#define KVM_UNMAPPED_PAGE ((void *) 0x500 + POISON_POINTER_DELTA)
|
|
|
|
|
|
|
|
struct kvm_host_map {
|
|
|
|
/*
|
|
|
|
* Only valid if the 'pfn' is managed by the host kernel (i.e. There is
|
|
|
|
* a 'struct page' for it. When using mem= kernel parameter some memory
|
|
|
|
* can be used as guest memory but they are not managed by host
|
|
|
|
* kernel).
|
|
|
|
* If 'pfn' is not managed by the host kernel, this field is
|
|
|
|
* initialized to KVM_UNMAPPED_PAGE.
|
|
|
|
*/
|
|
|
|
struct page *page;
|
|
|
|
void *hva;
|
|
|
|
kvm_pfn_t pfn;
|
|
|
|
kvm_pfn_t gfn;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Used to check if the mapping is valid or not. Never use 'kvm_host_map'
|
|
|
|
* directly to check for that.
|
|
|
|
*/
|
|
|
|
static inline bool kvm_vcpu_mapped(struct kvm_host_map *map)
|
|
|
|
{
|
|
|
|
return !!map->hva;
|
|
|
|
}
|
|
|
|
|
2012-04-18 23:22:47 +07:00
|
|
|
/*
|
|
|
|
* Sometimes a large or cross-page mmio needs to be broken up into separate
|
|
|
|
* exits for userspace servicing.
|
|
|
|
*/
|
|
|
|
struct kvm_mmio_fragment {
|
|
|
|
gpa_t gpa;
|
|
|
|
void *data;
|
|
|
|
unsigned len;
|
|
|
|
};
|
|
|
|
|
2007-12-14 08:45:31 +07:00
|
|
|
struct kvm_vcpu {
|
|
|
|
struct kvm *kvm;
|
2008-01-29 06:42:34 +07:00
|
|
|
#ifdef CONFIG_PREEMPT_NOTIFIERS
|
2007-12-14 08:45:31 +07:00
|
|
|
struct preempt_notifier preempt_notifier;
|
2008-01-29 06:42:34 +07:00
|
|
|
#endif
|
2011-01-12 14:40:31 +07:00
|
|
|
int cpu;
|
2019-11-07 19:53:42 +07:00
|
|
|
int vcpu_id; /* id given by userspace at creation */
|
|
|
|
int vcpu_idx; /* index in kvm->vcpus array */
|
2011-01-12 14:40:31 +07:00
|
|
|
int srcu_idx;
|
|
|
|
int mode;
|
2018-07-10 16:27:19 +07:00
|
|
|
u64 requests;
|
2008-12-15 19:52:10 +07:00
|
|
|
unsigned long guest_debug;
|
2011-01-12 14:40:31 +07:00
|
|
|
|
2015-09-18 21:29:55 +07:00
|
|
|
int pre_pcpu;
|
|
|
|
struct list_head blocked_vcpu_list;
|
|
|
|
|
2011-01-12 14:40:31 +07:00
|
|
|
struct mutex mutex;
|
|
|
|
struct kvm_run *run;
|
2009-12-23 23:35:25 +07:00
|
|
|
|
2016-02-19 15:46:39 +07:00
|
|
|
struct swait_queue_head wq;
|
2017-07-06 19:44:28 +07:00
|
|
|
struct pid __rcu *pid;
|
2007-12-14 08:45:31 +07:00
|
|
|
int sigset_active;
|
|
|
|
sigset_t sigset;
|
|
|
|
struct kvm_vcpu_stat stat;
|
2015-09-03 21:07:37 +07:00
|
|
|
unsigned int halt_poll_ns;
|
2016-05-13 17:16:35 +07:00
|
|
|
bool valid_wakeup;
|
2007-12-14 08:45:31 +07:00
|
|
|
|
2007-10-20 14:34:38 +07:00
|
|
|
#ifdef CONFIG_HAS_IOMEM
|
2007-12-14 08:45:31 +07:00
|
|
|
int mmio_needed;
|
|
|
|
int mmio_read_completed;
|
|
|
|
int mmio_is_write;
|
2012-04-18 23:22:47 +07:00
|
|
|
int mmio_cur_fragment;
|
|
|
|
int mmio_nr_fragments;
|
|
|
|
struct kvm_mmio_fragment mmio_fragments[KVM_MAX_MMIO_FRAGMENTS];
|
2007-10-20 14:34:38 +07:00
|
|
|
#endif
|
2007-04-19 21:27:43 +07:00
|
|
|
|
2010-10-14 16:22:46 +07:00
|
|
|
#ifdef CONFIG_KVM_ASYNC_PF
|
|
|
|
struct {
|
|
|
|
u32 queued;
|
|
|
|
struct list_head queue;
|
|
|
|
struct list_head done;
|
|
|
|
spinlock_t lock;
|
|
|
|
} async_pf;
|
|
|
|
#endif
|
|
|
|
|
2012-07-18 20:37:46 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT
|
|
|
|
/*
|
|
|
|
* Cpu relax intercept or pause loop exit optimization
|
|
|
|
* in_spin_loop: set when a vcpu does a pause loop exit
|
|
|
|
* or cpu relax intercepted.
|
|
|
|
* dy_eligible: indicates whether vcpu is eligible for directed yield.
|
|
|
|
*/
|
|
|
|
struct {
|
|
|
|
bool in_spin_loop;
|
|
|
|
bool dy_eligible;
|
|
|
|
} spin_loop;
|
|
|
|
#endif
|
2013-03-05 01:02:07 +07:00
|
|
|
bool preempted;
|
KVM: Boost vCPUs that are delivering interrupts
Inspired by commit 9cac38dd5d (KVM/s390: Set preempted flag during
vcpu wakeup and interrupt delivery), we want to also boost not just
lock holders but also vCPUs that are delivering interrupts. Most
smp_call_function_many calls are synchronous, so the IPI target vCPUs
are also good yield candidates. This patch introduces vcpu->ready to
boost vCPUs during wakeup and interrupt delivery time; unlike s390 we do
not reuse vcpu->preempted so that voluntarily preempted vCPUs are taken
into account by kvm_vcpu_on_spin, but vmx_vcpu_pi_put is not affected
(VT-d PI handles voluntary preemption separately, in pi_pre_block).
Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM:
ebizzy -M
vanilla boosting improved
1VM 21443 23520 9%
2VM 2800 8000 180%
3VM 1800 3100 72%
Testing on my Haswell desktop 8 HT, with 8 vCPUs VM 8GB RAM, two VMs,
one running ebizzy -M, the other running 'stress --cpu 2':
w/ boosting + w/o pv sched yield(vanilla)
vanilla boosting improved
1570 4000 155%
w/ boosting + w/ pv sched yield(vanilla)
vanilla boosting improved
1844 5157 179%
w/o boosting, perf top in VM:
72.33% [kernel] [k] smp_call_function_many
4.22% [kernel] [k] call_function_i
3.71% [kernel] [k] async_page_fault
w/ boosting, perf top in VM:
38.43% [kernel] [k] smp_call_function_many
6.31% [kernel] [k] async_page_fault
6.13% libc-2.23.so [.] __memcpy_avx_unaligned
4.88% [kernel] [k] call_function_interrupt
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-18 18:39:06 +07:00
|
|
|
bool ready;
|
2007-12-14 08:41:22 +07:00
|
|
|
struct kvm_vcpu_arch arch;
|
2016-09-16 21:27:35 +07:00
|
|
|
struct dentry *debugfs_dentry;
|
2007-12-14 08:41:22 +07:00
|
|
|
};
|
|
|
|
|
2011-01-12 14:40:31 +07:00
|
|
|
static inline int kvm_vcpu_exiting_guest_mode(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
2017-04-27 03:32:24 +07:00
|
|
|
/*
|
|
|
|
* The memory barrier ensures a previous write to vcpu->requests cannot
|
|
|
|
* be reordered with the read of vcpu->mode. It pairs with the general
|
|
|
|
* memory barrier following the write of vcpu->mode in VCPU RUN.
|
|
|
|
*/
|
|
|
|
smp_mb__before_atomic();
|
2011-01-12 14:40:31 +07:00
|
|
|
return cmpxchg(&vcpu->mode, IN_GUEST_MODE, EXITING_GUEST_MODE);
|
|
|
|
}
|
|
|
|
|
2010-04-13 20:47:24 +07:00
|
|
|
/*
|
|
|
|
* Some of the bitops functions do not support too long bitmaps.
|
|
|
|
* This number must be determined not to exceed such limits.
|
|
|
|
*/
|
|
|
|
#define KVM_MEM_MAX_NR_PAGES ((1UL << 31) - 1)
|
|
|
|
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
struct kvm_memory_slot {
|
|
|
|
gfn_t base_gfn;
|
|
|
|
unsigned long npages;
|
|
|
|
unsigned long *dirty_bitmap;
|
2012-02-08 11:02:18 +07:00
|
|
|
struct kvm_arch_memory_slot arch;
|
2007-10-18 16:09:33 +07:00
|
|
|
unsigned long userspace_addr;
|
2012-12-11 00:33:26 +07:00
|
|
|
u32 flags;
|
2012-12-11 00:33:32 +07:00
|
|
|
short id;
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
};
|
|
|
|
|
2010-04-12 17:35:35 +07:00
|
|
|
static inline unsigned long kvm_dirty_bitmap_bytes(struct kvm_memory_slot *memslot)
|
|
|
|
{
|
|
|
|
return ALIGN(memslot->npages, BITS_PER_LONG) / 8;
|
|
|
|
}
|
|
|
|
|
2018-04-30 23:33:24 +07:00
|
|
|
static inline unsigned long *kvm_second_dirty_bitmap(struct kvm_memory_slot *memslot)
|
|
|
|
{
|
|
|
|
unsigned long len = kvm_dirty_bitmap_bytes(memslot);
|
|
|
|
|
|
|
|
return memslot->dirty_bitmap + len / sizeof(*memslot->dirty_bitmap);
|
|
|
|
}
|
|
|
|
|
2013-07-15 18:36:01 +07:00
|
|
|
struct kvm_s390_adapter_int {
|
|
|
|
u64 ind_addr;
|
|
|
|
u64 summary_addr;
|
|
|
|
u64 ind_offset;
|
|
|
|
u32 summary_offset;
|
|
|
|
u32 adapter_id;
|
|
|
|
};
|
|
|
|
|
2015-11-10 19:36:34 +07:00
|
|
|
struct kvm_hv_sint {
|
|
|
|
u32 vcpu;
|
|
|
|
u32 sint;
|
|
|
|
};
|
|
|
|
|
2008-11-19 18:58:46 +07:00
|
|
|
struct kvm_kernel_irq_routing_entry {
|
|
|
|
u32 gsi;
|
2009-07-26 21:10:01 +07:00
|
|
|
u32 type;
|
2009-02-04 22:28:14 +07:00
|
|
|
int (*set)(struct kvm_kernel_irq_routing_entry *e,
|
2013-04-11 18:21:40 +07:00
|
|
|
struct kvm *kvm, int irq_source_id, int level,
|
|
|
|
bool line_status);
|
2008-11-19 18:58:46 +07:00
|
|
|
union {
|
|
|
|
struct {
|
|
|
|
unsigned irqchip;
|
|
|
|
unsigned pin;
|
|
|
|
} irqchip;
|
2016-07-22 23:20:38 +07:00
|
|
|
struct {
|
|
|
|
u32 address_lo;
|
|
|
|
u32 address_hi;
|
|
|
|
u32 data;
|
|
|
|
u32 flags;
|
|
|
|
u32 devid;
|
|
|
|
} msi;
|
2013-07-15 18:36:01 +07:00
|
|
|
struct kvm_s390_adapter_int adapter;
|
2015-11-10 19:36:34 +07:00
|
|
|
struct kvm_hv_sint hv_sint;
|
2008-11-19 18:58:46 +07:00
|
|
|
};
|
2009-08-24 15:54:20 +07:00
|
|
|
struct hlist_node link;
|
|
|
|
};
|
|
|
|
|
2015-07-30 13:32:35 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_IRQ_ROUTING
|
|
|
|
struct kvm_irq_routing_table {
|
|
|
|
int chip[KVM_NR_IRQCHIPS][KVM_IRQCHIP_NUM_PINS];
|
|
|
|
u32 nr_rt_entries;
|
|
|
|
/*
|
|
|
|
* Array indexed by gsi. Each entry contains list of irq chips
|
|
|
|
* the gsi is connected to.
|
|
|
|
*/
|
|
|
|
struct hlist_head map[0];
|
|
|
|
};
|
|
|
|
#endif
|
|
|
|
|
2012-12-11 00:33:15 +07:00
|
|
|
#ifndef KVM_PRIVATE_MEM_SLOTS
|
|
|
|
#define KVM_PRIVATE_MEM_SLOTS 0
|
|
|
|
#endif
|
|
|
|
|
2011-11-24 16:37:48 +07:00
|
|
|
#ifndef KVM_MEM_SLOTS_NUM
|
2012-12-11 00:33:09 +07:00
|
|
|
#define KVM_MEM_SLOTS_NUM (KVM_USER_MEM_SLOTS + KVM_PRIVATE_MEM_SLOTS)
|
2011-11-24 16:37:48 +07:00
|
|
|
#endif
|
|
|
|
|
2015-05-17 22:30:37 +07:00
|
|
|
#ifndef __KVM_VCPU_MULTIPLE_ADDRESS_SPACE
|
|
|
|
static inline int kvm_arch_vcpu_memslots_id(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2011-11-24 16:40:57 +07:00
|
|
|
/*
|
|
|
|
* Note:
|
|
|
|
* memslots are not sorted by id anymore, please use id_to_memslot()
|
|
|
|
* to get the memslot by its id.
|
|
|
|
*/
|
2009-12-23 23:35:16 +07:00
|
|
|
struct kvm_memslots {
|
2010-10-18 20:22:23 +07:00
|
|
|
u64 generation;
|
2011-11-24 16:37:48 +07:00
|
|
|
struct kvm_memory_slot memslots[KVM_MEM_SLOTS_NUM];
|
2011-11-24 16:41:54 +07:00
|
|
|
/* The mapping table from slot id to the index in memslots[]. */
|
2012-12-11 00:33:32 +07:00
|
|
|
short id_to_index[KVM_MEM_SLOTS_NUM];
|
2014-12-02 00:29:25 +07:00
|
|
|
atomic_t lru_slot;
|
2014-12-02 00:29:27 +07:00
|
|
|
int used_slots;
|
2009-12-23 23:35:16 +07:00
|
|
|
};
|
|
|
|
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
struct kvm {
|
2007-12-21 07:18:26 +07:00
|
|
|
spinlock_t mmu_lock;
|
2009-12-23 23:35:26 +07:00
|
|
|
struct mutex slots_lock;
|
2007-11-21 21:41:05 +07:00
|
|
|
struct mm_struct *mm; /* userspace tied to this vm */
|
2017-07-06 21:17:14 +07:00
|
|
|
struct kvm_memslots __rcu *memslots[KVM_ADDRESS_SPACE_NUM];
|
2007-07-27 14:16:56 +07:00
|
|
|
struct kvm_vcpu *vcpus[KVM_MAX_VCPUS];
|
2016-06-13 19:48:25 +07:00
|
|
|
|
|
|
|
/*
|
|
|
|
* created_vcpus is protected by kvm->lock, and is incremented
|
|
|
|
* at the beginning of KVM_CREATE_VCPU. online_vcpus is only
|
|
|
|
* incremented after storing the kvm_vcpu pointer in vcpus,
|
|
|
|
* and is accessed atomically.
|
|
|
|
*/
|
2009-06-09 19:56:28 +07:00
|
|
|
atomic_t online_vcpus;
|
2016-06-13 19:48:25 +07:00
|
|
|
int created_vcpus;
|
2011-02-01 21:53:28 +07:00
|
|
|
int last_boosted_vcpu;
|
2007-02-12 15:54:44 +07:00
|
|
|
struct list_head vm_list;
|
2009-06-05 01:08:23 +07:00
|
|
|
struct mutex lock;
|
2017-07-07 15:51:38 +07:00
|
|
|
struct kvm_io_bus __rcu *buses[KVM_NR_BUSES];
|
2009-05-20 21:30:49 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_EVENTFD
|
|
|
|
struct {
|
|
|
|
spinlock_t lock;
|
|
|
|
struct list_head items;
|
2012-09-22 00:58:03 +07:00
|
|
|
struct list_head resampler_list;
|
|
|
|
struct mutex resampler_lock;
|
2009-05-20 21:30:49 +07:00
|
|
|
} irqfds;
|
KVM: add ioeventfd support
ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd
signal when written to by a guest. Host userspace can register any
arbitrary IO address with a corresponding eventfd and then pass the eventfd
to a specific end-point of interest for handling.
Normal IO requires a blocking round-trip since the operation may cause
side-effects in the emulated model or may return data to the caller.
Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM
"heavy-weight" exit back to userspace, and is ultimately serviced by qemu's
device model synchronously before returning control back to the vcpu.
However, there is a subclass of IO which acts purely as a trigger for
other IO (such as to kick off an out-of-band DMA request, etc). For these
patterns, the synchronous call is particularly expensive since we really
only want to simply get our notification transmitted asychronously and
return as quickly as possible. All the sychronous infrastructure to ensure
proper data-dependencies are met in the normal IO case are just unecessary
overhead for signalling. This adds additional computational load on the
system, as well as latency to the signalling path.
Therefore, we provide a mechanism for registration of an in-kernel trigger
point that allows the VCPU to only require a very brief, lightweight
exit just long enough to signal an eventfd. This also means that any
clients compatible with the eventfd interface (which includes userspace
and kernelspace equally well) can now register to be notified. The end
result should be a more flexible and higher performance notification API
for the backend KVM hypervisor and perhipheral components.
To test this theory, we built a test-harness called "doorbell". This
module has a function called "doorbell_ring()" which simply increments a
counter for each time the doorbell is signaled. It supports signalling
from either an eventfd, or an ioctl().
We then wired up two paths to the doorbell: One via QEMU via a registered
io region and through the doorbell ioctl(). The other is direct via
ioeventfd.
You can download this test harness here:
ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2
The measured results are as follows:
qemu-mmio: 110000 iops, 9.09us rtt
ioeventfd-mmio: 200100 iops, 5.00us rtt
ioeventfd-pio: 367300 iops, 2.72us rtt
I didn't measure qemu-pio, because I have to figure out how to register a
PIO region with qemu's device model, and I got lazy. However, for now we
can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO,
and -350ns for HC, we get:
qemu-pio: 153139 iops, 6.53us rtt
ioeventfd-hc: 412585 iops, 2.37us rtt
these are just for fun, for now, until I can gather more data.
Here is a graph for your convenience:
http://developer.novell.com/wiki/images/7/76/Iofd-chart.png
The conclusion to draw is that we save about 4us by skipping the userspace
hop.
--------------------
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
|
|
|
struct list_head ioeventfds;
|
2009-05-20 21:30:49 +07:00
|
|
|
#endif
|
2007-11-18 21:24:12 +07:00
|
|
|
struct kvm_vm_stat stat;
|
2007-12-14 08:54:20 +07:00
|
|
|
struct kvm_arch arch;
|
2017-02-20 18:06:21 +07:00
|
|
|
refcount_t users_count;
|
2017-03-31 18:53:23 +07:00
|
|
|
#ifdef CONFIG_KVM_MMIO
|
2008-05-30 21:05:54 +07:00
|
|
|
struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
|
2011-07-21 00:59:00 +07:00
|
|
|
spinlock_t ring_lock;
|
|
|
|
struct list_head coalesced_zones;
|
2008-05-30 21:05:54 +07:00
|
|
|
#endif
|
2008-07-25 21:24:52 +07:00
|
|
|
|
2009-06-05 01:08:23 +07:00
|
|
|
struct mutex irq_lock;
|
2009-01-04 22:10:50 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_IRQCHIP
|
2010-11-19 00:09:08 +07:00
|
|
|
/*
|
2014-06-30 17:51:11 +07:00
|
|
|
* Update side is protected by irq_lock.
|
2010-11-19 00:09:08 +07:00
|
|
|
*/
|
2010-03-04 21:59:23 +07:00
|
|
|
struct kvm_irq_routing_table __rcu *irq_routing;
|
2014-08-06 19:24:45 +07:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAVE_KVM_IRQFD
|
2009-08-24 15:54:23 +07:00
|
|
|
struct hlist_head irq_ack_notifier_list;
|
2009-01-04 22:10:50 +07:00
|
|
|
#endif
|
|
|
|
|
2012-06-16 02:07:24 +07:00
|
|
|
#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
|
2008-07-25 21:24:52 +07:00
|
|
|
struct mmu_notifier mmu_notifier;
|
|
|
|
unsigned long mmu_notifier_seq;
|
|
|
|
long mmu_notifier_count;
|
|
|
|
#endif
|
2014-04-17 16:06:12 +07:00
|
|
|
long tlbs_dirty;
|
2013-04-25 21:11:23 +07:00
|
|
|
struct list_head devices;
|
kvm: introduce manual dirty log reprotect
There are two problems with KVM_GET_DIRTY_LOG. First, and less important,
it can take kvm->mmu_lock for an extended period of time. Second, its user
can actually see many false positives in some cases. The latter is due
to a benign race like this:
1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
them.
2. The guest modifies the pages, causing them to be marked ditry.
3. Userspace actually copies the pages.
4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
they were not written to since (3).
This is especially a problem for large guests, where the time between
(1) and (3) can be substantial. This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns. Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page. The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-23 07:36:47 +07:00
|
|
|
bool manual_dirty_log_protect;
|
2016-05-18 18:26:23 +07:00
|
|
|
struct dentry *debugfs_dentry;
|
|
|
|
struct kvm_stat_data **debugfs_stat_data;
|
2017-04-21 07:30:06 +07:00
|
|
|
struct srcu_struct srcu;
|
|
|
|
struct srcu_struct irq_srcu;
|
2017-07-24 18:40:03 +07:00
|
|
|
pid_t userspace_pid;
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
};
|
|
|
|
|
KVM: Cleanup the kvm_print functions and introduce pr_XX wrappers
Introduces a couple of print functions, which are essentially wrappers
around standard printk functions, with a KVM: prefix.
Functions introduced or modified are:
- kvm_err(fmt, ...)
- kvm_info(fmt, ...)
- kvm_debug(fmt, ...)
- kvm_pr_unimpl(fmt, ...)
- pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...)
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-04 01:17:48 +07:00
|
|
|
#define kvm_err(fmt, ...) \
|
|
|
|
pr_err("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__)
|
|
|
|
#define kvm_info(fmt, ...) \
|
|
|
|
pr_info("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__)
|
|
|
|
#define kvm_debug(fmt, ...) \
|
|
|
|
pr_debug("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__)
|
2016-11-15 13:36:18 +07:00
|
|
|
#define kvm_debug_ratelimited(fmt, ...) \
|
|
|
|
pr_debug_ratelimited("kvm [%i]: " fmt, task_pid_nr(current), \
|
|
|
|
## __VA_ARGS__)
|
KVM: Cleanup the kvm_print functions and introduce pr_XX wrappers
Introduces a couple of print functions, which are essentially wrappers
around standard printk functions, with a KVM: prefix.
Functions introduced or modified are:
- kvm_err(fmt, ...)
- kvm_info(fmt, ...)
- kvm_debug(fmt, ...)
- kvm_pr_unimpl(fmt, ...)
- pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...)
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-04 01:17:48 +07:00
|
|
|
#define kvm_pr_unimpl(fmt, ...) \
|
|
|
|
pr_err_ratelimited("kvm [%i]: " fmt, \
|
|
|
|
task_tgid_nr(current), ## __VA_ARGS__)
|
2007-08-01 07:48:02 +07:00
|
|
|
|
KVM: Cleanup the kvm_print functions and introduce pr_XX wrappers
Introduces a couple of print functions, which are essentially wrappers
around standard printk functions, with a KVM: prefix.
Functions introduced or modified are:
- kvm_err(fmt, ...)
- kvm_info(fmt, ...)
- kvm_debug(fmt, ...)
- kvm_pr_unimpl(fmt, ...)
- pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...)
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-04 01:17:48 +07:00
|
|
|
/* The guest did something we don't support. */
|
|
|
|
#define vcpu_unimpl(vcpu, fmt, ...) \
|
2015-11-21 01:52:12 +07:00
|
|
|
kvm_pr_unimpl("vcpu%i, guest rIP: 0x%lx " fmt, \
|
|
|
|
(vcpu)->vcpu_id, kvm_rip_read(vcpu), ## __VA_ARGS__)
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
|
2015-07-03 19:01:35 +07:00
|
|
|
#define vcpu_debug(vcpu, fmt, ...) \
|
|
|
|
kvm_debug("vcpu%i " fmt, (vcpu)->vcpu_id, ## __VA_ARGS__)
|
2016-11-15 13:36:18 +07:00
|
|
|
#define vcpu_debug_ratelimited(vcpu, fmt, ...) \
|
|
|
|
kvm_debug_ratelimited("vcpu%i " fmt, (vcpu)->vcpu_id, \
|
|
|
|
## __VA_ARGS__)
|
2015-11-30 23:22:20 +07:00
|
|
|
#define vcpu_err(vcpu, fmt, ...) \
|
|
|
|
kvm_err("vcpu%i " fmt, (vcpu)->vcpu_id, ## __VA_ARGS__)
|
2015-07-03 19:01:35 +07:00
|
|
|
|
2017-07-07 15:51:38 +07:00
|
|
|
static inline struct kvm_io_bus *kvm_get_bus(struct kvm *kvm, enum kvm_bus idx)
|
|
|
|
{
|
|
|
|
return srcu_dereference_check(kvm->buses[idx], &kvm->srcu,
|
2017-08-02 22:55:54 +07:00
|
|
|
lockdep_is_held(&kvm->slots_lock) ||
|
|
|
|
!refcount_read(&kvm->users_count));
|
2017-07-07 15:51:38 +07:00
|
|
|
}
|
|
|
|
|
2009-06-09 19:56:29 +07:00
|
|
|
static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i)
|
|
|
|
{
|
2019-04-11 16:16:47 +07:00
|
|
|
int num_vcpus = atomic_read(&kvm->online_vcpus);
|
|
|
|
i = array_index_nospec(i, num_vcpus);
|
|
|
|
|
|
|
|
/* Pairs with smp_wmb() in kvm_vm_ioctl_create_vcpu. */
|
2009-06-09 19:56:29 +07:00
|
|
|
smp_rmb();
|
|
|
|
return kvm->vcpus[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
#define kvm_for_each_vcpu(idx, vcpup, kvm) \
|
2011-04-13 08:30:17 +07:00
|
|
|
for (idx = 0; \
|
|
|
|
idx < atomic_read(&kvm->online_vcpus) && \
|
|
|
|
(vcpup = kvm_get_vcpu(kvm, idx)) != NULL; \
|
|
|
|
idx++)
|
2009-06-09 19:56:29 +07:00
|
|
|
|
2015-11-05 15:03:50 +07:00
|
|
|
static inline struct kvm_vcpu *kvm_get_vcpu_by_id(struct kvm *kvm, int id)
|
|
|
|
{
|
2016-05-09 23:11:54 +07:00
|
|
|
struct kvm_vcpu *vcpu = NULL;
|
2015-11-05 15:03:50 +07:00
|
|
|
int i;
|
|
|
|
|
2016-05-09 23:11:54 +07:00
|
|
|
if (id < 0)
|
2015-11-05 15:55:08 +07:00
|
|
|
return NULL;
|
2016-05-09 23:11:54 +07:00
|
|
|
if (id < KVM_MAX_VCPUS)
|
|
|
|
vcpu = kvm_get_vcpu(kvm, id);
|
2015-11-05 15:55:08 +07:00
|
|
|
if (vcpu && vcpu->vcpu_id == id)
|
|
|
|
return vcpu;
|
2015-11-05 15:03:50 +07:00
|
|
|
kvm_for_each_vcpu(i, vcpu, kvm)
|
|
|
|
if (vcpu->vcpu_id == id)
|
|
|
|
return vcpu;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2017-05-09 01:38:40 +07:00
|
|
|
static inline int kvm_vcpu_get_idx(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
2019-11-07 19:53:42 +07:00
|
|
|
return vcpu->vcpu_idx;
|
2017-05-09 01:38:40 +07:00
|
|
|
}
|
|
|
|
|
2011-11-24 16:39:18 +07:00
|
|
|
#define kvm_for_each_memslot(memslot, slots) \
|
|
|
|
for (memslot = &slots->memslots[0]; \
|
2011-11-24 16:40:57 +07:00
|
|
|
memslot < slots->memslots + KVM_MEM_SLOTS_NUM && memslot->npages;\
|
|
|
|
memslot++)
|
2011-11-24 16:39:18 +07:00
|
|
|
|
2007-07-27 14:16:56 +07:00
|
|
|
int kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id);
|
|
|
|
void kvm_vcpu_uninit(struct kvm_vcpu *vcpu);
|
|
|
|
|
2017-12-05 03:35:23 +07:00
|
|
|
void vcpu_load(struct kvm_vcpu *vcpu);
|
KVM: Portability: split kvm_vcpu_ioctl
This patch splits kvm_vcpu_ioctl into archtecture independent parts, and
x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c.
Common ioctls for all architectures are:
KVM_RUN, KVM_GET/SET_(S-)REGS, KVM_TRANSLATE, KVM_INTERRUPT,
KVM_DEBUG_GUEST, KVM_SET_SIGNAL_MASK, KVM_GET/SET_FPU
Note that some PPC chips don't have an FPU, so we might need an #ifdef
around KVM_GET/SET_FPU one day.
x86 specific ioctls are:
KVM_GET/SET_LAPIC, KVM_SET_CPUID, KVM_GET/SET_MSRS
An interresting aspect is vcpu_load/vcpu_put. We now have a common
vcpu_load/put which does the preemption stuff, and an architecture
specific kvm_arch_vcpu_load/put. In the x86 case, this one calls the
vmx/svm function defined in kvm_x86_ops.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-12 00:16:52 +07:00
|
|
|
void vcpu_put(struct kvm_vcpu *vcpu);
|
|
|
|
|
2014-11-20 19:45:31 +07:00
|
|
|
#ifdef __KVM_HAVE_IOAPIC
|
2017-04-07 15:50:33 +07:00
|
|
|
void kvm_arch_post_irq_ack_notifier_list_update(struct kvm *kvm);
|
2015-11-10 19:36:31 +07:00
|
|
|
void kvm_arch_post_irq_routing_update(struct kvm *kvm);
|
2014-11-20 19:45:31 +07:00
|
|
|
#else
|
2017-04-07 15:50:33 +07:00
|
|
|
static inline void kvm_arch_post_irq_ack_notifier_list_update(struct kvm *kvm)
|
2014-11-20 19:45:31 +07:00
|
|
|
{
|
|
|
|
}
|
2015-11-10 19:36:31 +07:00
|
|
|
static inline void kvm_arch_post_irq_routing_update(struct kvm *kvm)
|
2015-07-30 13:32:35 +07:00
|
|
|
{
|
|
|
|
}
|
2014-11-20 19:45:31 +07:00
|
|
|
#endif
|
|
|
|
|
2014-06-30 17:51:13 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_IRQFD
|
2013-02-28 18:33:18 +07:00
|
|
|
int kvm_irqfd_init(void);
|
|
|
|
void kvm_irqfd_exit(void);
|
|
|
|
#else
|
|
|
|
static inline int kvm_irqfd_init(void)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void kvm_irqfd_exit(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
2010-04-28 19:39:01 +07:00
|
|
|
int kvm_init(void *opaque, unsigned vcpu_size, unsigned vcpu_align,
|
2007-07-30 18:12:19 +07:00
|
|
|
struct module *module);
|
2007-11-14 19:39:31 +07:00
|
|
|
void kvm_exit(void);
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
|
2008-03-30 20:01:25 +07:00
|
|
|
void kvm_get_kvm(struct kvm *kvm);
|
|
|
|
void kvm_put_kvm(struct kvm *kvm);
|
2019-10-22 05:58:42 +07:00
|
|
|
void kvm_put_kvm_no_destroy(struct kvm *kvm);
|
2008-03-30 20:01:25 +07:00
|
|
|
|
2015-05-17 22:30:37 +07:00
|
|
|
static inline struct kvm_memslots *__kvm_memslots(struct kvm *kvm, int as_id)
|
2010-04-19 16:41:23 +07:00
|
|
|
{
|
2019-04-11 16:16:47 +07:00
|
|
|
as_id = array_index_nospec(as_id, KVM_ADDRESS_SPACE_NUM);
|
2017-07-07 20:49:00 +07:00
|
|
|
return srcu_dereference_check(kvm->memslots[as_id], &kvm->srcu,
|
2017-08-02 22:55:54 +07:00
|
|
|
lockdep_is_held(&kvm->slots_lock) ||
|
|
|
|
!refcount_read(&kvm->users_count));
|
2010-04-19 16:41:23 +07:00
|
|
|
}
|
|
|
|
|
2015-05-17 22:30:37 +07:00
|
|
|
static inline struct kvm_memslots *kvm_memslots(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
return __kvm_memslots(kvm, 0);
|
|
|
|
}
|
|
|
|
|
2015-05-17 18:58:53 +07:00
|
|
|
static inline struct kvm_memslots *kvm_vcpu_memslots(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
2015-05-17 22:30:37 +07:00
|
|
|
int as_id = kvm_arch_vcpu_memslots_id(vcpu);
|
|
|
|
|
|
|
|
return __kvm_memslots(vcpu->kvm, as_id);
|
2015-05-17 18:58:53 +07:00
|
|
|
}
|
|
|
|
|
2011-11-24 18:04:35 +07:00
|
|
|
static inline struct kvm_memory_slot *
|
|
|
|
id_to_memslot(struct kvm_memslots *slots, int id)
|
|
|
|
{
|
2011-11-24 16:41:54 +07:00
|
|
|
int index = slots->id_to_index[id];
|
|
|
|
struct kvm_memory_slot *slot;
|
2011-11-24 16:40:57 +07:00
|
|
|
|
2011-11-24 16:41:54 +07:00
|
|
|
slot = &slots->memslots[index];
|
2011-11-24 16:40:57 +07:00
|
|
|
|
2011-11-24 16:41:54 +07:00
|
|
|
WARN_ON(slot->id != id);
|
|
|
|
return slot;
|
2011-11-24 18:04:35 +07:00
|
|
|
}
|
|
|
|
|
2013-02-27 17:43:44 +07:00
|
|
|
/*
|
|
|
|
* KVM_SET_USER_MEMORY_REGION ioctl allows the following operations:
|
|
|
|
* - create a new memory slot
|
|
|
|
* - delete an existing memory slot
|
|
|
|
* - modify an existing memory slot
|
|
|
|
* -- move it in the guest physical memory space
|
|
|
|
* -- just change its flags
|
|
|
|
*
|
|
|
|
* Since flags can be changed by some of these operations, the following
|
|
|
|
* differentiation is the best we can do for __kvm_set_memory_region():
|
|
|
|
*/
|
|
|
|
enum kvm_mr_change {
|
|
|
|
KVM_MR_CREATE,
|
|
|
|
KVM_MR_DELETE,
|
|
|
|
KVM_MR_MOVE,
|
|
|
|
KVM_MR_FLAGS_ONLY,
|
|
|
|
};
|
|
|
|
|
2007-10-25 04:52:57 +07:00
|
|
|
int kvm_set_memory_region(struct kvm *kvm,
|
2015-05-18 18:59:39 +07:00
|
|
|
const struct kvm_userspace_memory_region *mem);
|
2007-10-29 08:40:42 +07:00
|
|
|
int __kvm_set_memory_region(struct kvm *kvm,
|
2015-05-18 18:59:39 +07:00
|
|
|
const struct kvm_userspace_memory_region *mem);
|
2013-10-07 23:48:00 +07:00
|
|
|
void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,
|
2012-02-08 11:02:18 +07:00
|
|
|
struct kvm_memory_slot *dont);
|
2013-10-07 23:48:00 +07:00
|
|
|
int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
|
|
|
|
unsigned long npages);
|
2019-02-06 03:54:17 +07:00
|
|
|
void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen);
|
2009-12-23 23:35:18 +07:00
|
|
|
int kvm_arch_prepare_memory_region(struct kvm *kvm,
|
|
|
|
struct kvm_memory_slot *memslot,
|
2015-05-18 18:59:39 +07:00
|
|
|
const struct kvm_userspace_memory_region *mem,
|
2013-02-27 17:44:34 +07:00
|
|
|
enum kvm_mr_change change);
|
2009-12-23 23:35:18 +07:00
|
|
|
void kvm_arch_commit_memory_region(struct kvm *kvm,
|
2015-05-18 18:59:39 +07:00
|
|
|
const struct kvm_userspace_memory_region *mem,
|
2013-02-27 17:45:25 +07:00
|
|
|
const struct kvm_memory_slot *old,
|
2015-05-18 18:20:23 +07:00
|
|
|
const struct kvm_memory_slot *new,
|
2013-02-27 17:45:25 +07:00
|
|
|
enum kvm_mr_change change);
|
2012-02-08 11:02:18 +07:00
|
|
|
bool kvm_largepages_enabled(void);
|
2009-06-11 22:07:44 +07:00
|
|
|
void kvm_disable_largepages(void);
|
2012-08-25 01:54:57 +07:00
|
|
|
/* flush all memory translations */
|
|
|
|
void kvm_arch_flush_shadow_all(struct kvm *kvm);
|
|
|
|
/* flush memory translations pointing to 'slot' */
|
|
|
|
void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
|
|
|
|
struct kvm_memory_slot *slot);
|
2009-12-23 23:35:23 +07:00
|
|
|
|
2015-05-19 21:01:50 +07:00
|
|
|
int gfn_to_page_many_atomic(struct kvm_memory_slot *slot, gfn_t gfn,
|
|
|
|
struct page **pages, int nr_pages);
|
2010-08-22 18:11:43 +07:00
|
|
|
|
2007-03-30 18:02:32 +07:00
|
|
|
struct page *gfn_to_page(struct kvm *kvm, gfn_t gfn);
|
2008-02-23 21:44:30 +07:00
|
|
|
unsigned long gfn_to_hva(struct kvm *kvm, gfn_t gfn);
|
2013-09-09 18:52:33 +07:00
|
|
|
unsigned long gfn_to_hva_prot(struct kvm *kvm, gfn_t gfn, bool *writable);
|
2012-08-21 10:02:51 +07:00
|
|
|
unsigned long gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn);
|
2014-08-19 17:15:00 +07:00
|
|
|
unsigned long gfn_to_hva_memslot_prot(struct kvm_memory_slot *slot, gfn_t gfn,
|
|
|
|
bool *writable);
|
2007-11-20 16:49:33 +07:00
|
|
|
void kvm_release_page_clean(struct page *page);
|
|
|
|
void kvm_release_page_dirty(struct page *page);
|
2008-04-03 02:46:56 +07:00
|
|
|
void kvm_set_page_accessed(struct page *page);
|
|
|
|
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
kvm_pfn_t gfn_to_pfn_atomic(struct kvm *kvm, gfn_t gfn);
|
|
|
|
kvm_pfn_t gfn_to_pfn(struct kvm *kvm, gfn_t gfn);
|
|
|
|
kvm_pfn_t gfn_to_pfn_prot(struct kvm *kvm, gfn_t gfn, bool write_fault,
|
2010-10-22 23:18:18 +07:00
|
|
|
bool *writable);
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
kvm_pfn_t gfn_to_pfn_memslot(struct kvm_memory_slot *slot, gfn_t gfn);
|
|
|
|
kvm_pfn_t gfn_to_pfn_memslot_atomic(struct kvm_memory_slot *slot, gfn_t gfn);
|
|
|
|
kvm_pfn_t __gfn_to_pfn_memslot(struct kvm_memory_slot *slot, gfn_t gfn,
|
|
|
|
bool atomic, bool *async, bool write_fault,
|
|
|
|
bool *writable);
|
2012-08-21 09:59:12 +07:00
|
|
|
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
void kvm_release_pfn_clean(kvm_pfn_t pfn);
|
2017-09-01 22:11:43 +07:00
|
|
|
void kvm_release_pfn_dirty(kvm_pfn_t pfn);
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
void kvm_set_pfn_dirty(kvm_pfn_t pfn);
|
|
|
|
void kvm_set_pfn_accessed(kvm_pfn_t pfn);
|
|
|
|
void kvm_get_pfn(kvm_pfn_t pfn);
|
2008-04-03 02:46:56 +07:00
|
|
|
|
2007-10-02 03:14:18 +07:00
|
|
|
int kvm_read_guest_page(struct kvm *kvm, gfn_t gfn, void *data, int offset,
|
|
|
|
int len);
|
2007-12-21 07:18:23 +07:00
|
|
|
int kvm_read_guest_atomic(struct kvm *kvm, gpa_t gpa, void *data,
|
|
|
|
unsigned long len);
|
2007-10-02 03:14:18 +07:00
|
|
|
int kvm_read_guest(struct kvm *kvm, gpa_t gpa, void *data, unsigned long len);
|
2017-05-02 21:20:18 +07:00
|
|
|
int kvm_read_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
|
|
|
|
void *data, unsigned long len);
|
2007-10-02 03:14:18 +07:00
|
|
|
int kvm_write_guest_page(struct kvm *kvm, gfn_t gfn, const void *data,
|
|
|
|
int offset, int len);
|
|
|
|
int kvm_write_guest(struct kvm *kvm, gpa_t gpa, const void *data,
|
|
|
|
unsigned long len);
|
2017-05-02 21:20:18 +07:00
|
|
|
int kvm_write_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
|
|
|
|
void *data, unsigned long len);
|
|
|
|
int kvm_write_guest_offset_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
|
2018-12-15 05:34:43 +07:00
|
|
|
void *data, unsigned int offset,
|
|
|
|
unsigned long len);
|
2017-05-02 21:20:18 +07:00
|
|
|
int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
|
|
|
|
gpa_t gpa, unsigned long len);
|
2019-10-21 22:28:17 +07:00
|
|
|
|
|
|
|
#define __kvm_put_guest(kvm, gfn, offset, value, type) \
|
|
|
|
({ \
|
|
|
|
unsigned long __addr = gfn_to_hva(kvm, gfn); \
|
|
|
|
type __user *__uaddr = (type __user *)(__addr + offset); \
|
|
|
|
int __ret = -EFAULT; \
|
|
|
|
\
|
|
|
|
if (!kvm_is_error_hva(__addr)) \
|
|
|
|
__ret = put_user(value, __uaddr); \
|
|
|
|
if (!__ret) \
|
|
|
|
mark_page_dirty(kvm, gfn); \
|
|
|
|
__ret; \
|
|
|
|
})
|
|
|
|
|
|
|
|
#define kvm_put_guest(kvm, gpa, value, type) \
|
|
|
|
({ \
|
|
|
|
gpa_t __gpa = gpa; \
|
|
|
|
struct kvm *__kvm = kvm; \
|
|
|
|
__kvm_put_guest(__kvm, __gpa >> PAGE_SHIFT, \
|
|
|
|
offset_in_page(__gpa), (value), type); \
|
|
|
|
})
|
|
|
|
|
2007-10-02 03:14:18 +07:00
|
|
|
int kvm_clear_guest_page(struct kvm *kvm, gfn_t gfn, int offset, int len);
|
|
|
|
int kvm_clear_guest(struct kvm *kvm, gpa_t gpa, unsigned long len);
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn);
|
2015-11-14 10:21:06 +07:00
|
|
|
bool kvm_is_visible_gfn(struct kvm *kvm, gfn_t gfn);
|
2010-01-28 18:37:56 +07:00
|
|
|
unsigned long kvm_host_page_size(struct kvm *kvm, gfn_t gfn);
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
void mark_page_dirty(struct kvm *kvm, gfn_t gfn);
|
|
|
|
|
2015-05-17 18:58:53 +07:00
|
|
|
struct kvm_memslots *kvm_vcpu_memslots(struct kvm_vcpu *vcpu);
|
|
|
|
struct kvm_memory_slot *kvm_vcpu_gfn_to_memslot(struct kvm_vcpu *vcpu, gfn_t gfn);
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
kvm_pfn_t kvm_vcpu_gfn_to_pfn_atomic(struct kvm_vcpu *vcpu, gfn_t gfn);
|
|
|
|
kvm_pfn_t kvm_vcpu_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn);
|
2019-02-01 03:24:34 +07:00
|
|
|
int kvm_vcpu_map(struct kvm_vcpu *vcpu, gpa_t gpa, struct kvm_host_map *map);
|
2015-05-17 18:58:53 +07:00
|
|
|
struct page *kvm_vcpu_gfn_to_page(struct kvm_vcpu *vcpu, gfn_t gfn);
|
2019-02-01 03:24:34 +07:00
|
|
|
void kvm_vcpu_unmap(struct kvm_vcpu *vcpu, struct kvm_host_map *map, bool dirty);
|
2015-05-17 18:58:53 +07:00
|
|
|
unsigned long kvm_vcpu_gfn_to_hva(struct kvm_vcpu *vcpu, gfn_t gfn);
|
|
|
|
unsigned long kvm_vcpu_gfn_to_hva_prot(struct kvm_vcpu *vcpu, gfn_t gfn, bool *writable);
|
|
|
|
int kvm_vcpu_read_guest_page(struct kvm_vcpu *vcpu, gfn_t gfn, void *data, int offset,
|
|
|
|
int len);
|
|
|
|
int kvm_vcpu_read_guest_atomic(struct kvm_vcpu *vcpu, gpa_t gpa, void *data,
|
|
|
|
unsigned long len);
|
|
|
|
int kvm_vcpu_read_guest(struct kvm_vcpu *vcpu, gpa_t gpa, void *data,
|
|
|
|
unsigned long len);
|
|
|
|
int kvm_vcpu_write_guest_page(struct kvm_vcpu *vcpu, gfn_t gfn, const void *data,
|
|
|
|
int offset, int len);
|
|
|
|
int kvm_vcpu_write_guest(struct kvm_vcpu *vcpu, gpa_t gpa, const void *data,
|
|
|
|
unsigned long len);
|
|
|
|
void kvm_vcpu_mark_page_dirty(struct kvm_vcpu *vcpu, gfn_t gfn);
|
|
|
|
|
2017-11-25 04:39:01 +07:00
|
|
|
void kvm_sigset_activate(struct kvm_vcpu *vcpu);
|
|
|
|
void kvm_sigset_deactivate(struct kvm_vcpu *vcpu);
|
|
|
|
|
2007-11-01 05:24:24 +07:00
|
|
|
void kvm_vcpu_block(struct kvm_vcpu *vcpu);
|
2015-08-27 21:41:15 +07:00
|
|
|
void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu);
|
|
|
|
void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu);
|
2017-04-27 03:32:26 +07:00
|
|
|
bool kvm_vcpu_wake_up(struct kvm_vcpu *vcpu);
|
2012-03-09 04:44:24 +07:00
|
|
|
void kvm_vcpu_kick(struct kvm_vcpu *vcpu);
|
2014-05-23 17:20:42 +07:00
|
|
|
int kvm_vcpu_yield_to(struct kvm_vcpu *target);
|
2017-08-08 11:05:32 +07:00
|
|
|
void kvm_vcpu_on_spin(struct kvm_vcpu *vcpu, bool usermode_vcpu_not_eligible);
|
2010-11-23 10:13:00 +07:00
|
|
|
|
2007-06-07 23:18:30 +07:00
|
|
|
void kvm_flush_remote_tlbs(struct kvm *kvm);
|
2008-02-21 02:47:24 +07:00
|
|
|
void kvm_reload_remote_mmus(struct kvm *kvm);
|
2018-05-16 22:21:28 +07:00
|
|
|
|
|
|
|
bool kvm_make_vcpus_request_mask(struct kvm *kvm, unsigned int req,
|
|
|
|
unsigned long *vcpu_bitmap, cpumask_var_t tmp);
|
2014-09-24 14:57:55 +07:00
|
|
|
bool kvm_make_all_cpus_request(struct kvm *kvm, unsigned int req);
|
2019-11-07 19:53:43 +07:00
|
|
|
bool kvm_make_cpus_request_mask(struct kvm *kvm, unsigned int req,
|
|
|
|
unsigned long *vcpu_bitmap);
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
|
2007-10-10 22:16:19 +07:00
|
|
|
long kvm_arch_dev_ioctl(struct file *filp,
|
|
|
|
unsigned int ioctl, unsigned long arg);
|
KVM: Portability: split kvm_vcpu_ioctl
This patch splits kvm_vcpu_ioctl into archtecture independent parts, and
x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c.
Common ioctls for all architectures are:
KVM_RUN, KVM_GET/SET_(S-)REGS, KVM_TRANSLATE, KVM_INTERRUPT,
KVM_DEBUG_GUEST, KVM_SET_SIGNAL_MASK, KVM_GET/SET_FPU
Note that some PPC chips don't have an FPU, so we might need an #ifdef
around KVM_GET/SET_FPU one day.
x86 specific ioctls are:
KVM_GET/SET_LAPIC, KVM_SET_CPUID, KVM_GET/SET_MSRS
An interresting aspect is vcpu_load/vcpu_put. We now have a common
vcpu_load/put which does the preemption stuff, and an architecture
specific kvm_arch_vcpu_load/put. In the x86 case, this one calls the
vmx/svm function defined in kvm_x86_ops.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-12 00:16:52 +07:00
|
|
|
long kvm_arch_vcpu_ioctl(struct file *filp,
|
|
|
|
unsigned int ioctl, unsigned long arg);
|
2018-04-19 02:19:58 +07:00
|
|
|
vm_fault_t kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf);
|
2007-11-15 22:07:47 +07:00
|
|
|
|
2014-07-14 23:27:35 +07:00
|
|
|
int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext);
|
2007-11-15 22:07:47 +07:00
|
|
|
|
2007-11-18 19:29:43 +07:00
|
|
|
int kvm_get_dirty_log(struct kvm *kvm,
|
|
|
|
struct kvm_dirty_log *log, int *is_dirty);
|
2015-01-16 06:58:53 +07:00
|
|
|
|
|
|
|
int kvm_get_dirty_log_protect(struct kvm *kvm,
|
2018-10-23 07:18:42 +07:00
|
|
|
struct kvm_dirty_log *log, bool *flush);
|
kvm: introduce manual dirty log reprotect
There are two problems with KVM_GET_DIRTY_LOG. First, and less important,
it can take kvm->mmu_lock for an extended period of time. Second, its user
can actually see many false positives in some cases. The latter is due
to a benign race like this:
1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
them.
2. The guest modifies the pages, causing them to be marked ditry.
3. Userspace actually copies the pages.
4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
they were not written to since (3).
This is especially a problem for large guests, where the time between
(1) and (3) can be substantial. This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns. Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page. The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-23 07:36:47 +07:00
|
|
|
int kvm_clear_dirty_log_protect(struct kvm *kvm,
|
|
|
|
struct kvm_clear_dirty_log *log, bool *flush);
|
2015-01-16 06:58:53 +07:00
|
|
|
|
2015-01-28 09:54:23 +07:00
|
|
|
void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
|
2015-01-16 06:58:53 +07:00
|
|
|
struct kvm_memory_slot *slot,
|
|
|
|
gfn_t gfn_offset,
|
|
|
|
unsigned long mask);
|
|
|
|
|
2007-11-18 19:29:43 +07:00
|
|
|
int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
|
|
|
|
struct kvm_dirty_log *log);
|
kvm: introduce manual dirty log reprotect
There are two problems with KVM_GET_DIRTY_LOG. First, and less important,
it can take kvm->mmu_lock for an extended period of time. Second, its user
can actually see many false positives in some cases. The latter is due
to a benign race like this:
1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
them.
2. The guest modifies the pages, causing them to be marked ditry.
3. Userspace actually copies the pages.
4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
they were not written to since (3).
This is especially a problem for large guests, where the time between
(1) and (3) can be substantial. This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns. Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page. The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-23 07:36:47 +07:00
|
|
|
int kvm_vm_ioctl_clear_dirty_log(struct kvm *kvm,
|
|
|
|
struct kvm_clear_dirty_log *log);
|
2007-11-18 19:29:43 +07:00
|
|
|
|
2013-04-11 18:21:40 +07:00
|
|
|
int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level,
|
|
|
|
bool line_status);
|
2017-02-16 16:40:56 +07:00
|
|
|
int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
|
|
|
|
struct kvm_enable_cap *cap);
|
2007-10-29 22:08:35 +07:00
|
|
|
long kvm_arch_vm_ioctl(struct file *filp,
|
|
|
|
unsigned int ioctl, unsigned long arg);
|
KVM: Portability: split kvm_vcpu_ioctl
This patch splits kvm_vcpu_ioctl into archtecture independent parts, and
x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c.
Common ioctls for all architectures are:
KVM_RUN, KVM_GET/SET_(S-)REGS, KVM_TRANSLATE, KVM_INTERRUPT,
KVM_DEBUG_GUEST, KVM_SET_SIGNAL_MASK, KVM_GET/SET_FPU
Note that some PPC chips don't have an FPU, so we might need an #ifdef
around KVM_GET/SET_FPU one day.
x86 specific ioctls are:
KVM_GET/SET_LAPIC, KVM_SET_CPUID, KVM_GET/SET_MSRS
An interresting aspect is vcpu_load/vcpu_put. We now have a common
vcpu_load/put which does the preemption stuff, and an architecture
specific kvm_arch_vcpu_load/put. In the x86 case, this one calls the
vmx/svm function defined in kvm_x86_ops.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-12 00:16:52 +07:00
|
|
|
|
2007-11-01 05:24:25 +07:00
|
|
|
int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu);
|
|
|
|
int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu);
|
|
|
|
|
2007-11-16 12:05:55 +07:00
|
|
|
int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_translation *tr);
|
|
|
|
|
2007-11-02 02:16:10 +07:00
|
|
|
int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs);
|
|
|
|
int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs);
|
|
|
|
int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_sregs *sregs);
|
|
|
|
int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_sregs *sregs);
|
2008-04-11 23:24:45 +07:00
|
|
|
int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_mp_state *mp_state);
|
|
|
|
int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_mp_state *mp_state);
|
2008-12-15 19:52:10 +07:00
|
|
|
int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_guest_debug *dbg);
|
2007-11-02 02:16:10 +07:00
|
|
|
int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run);
|
|
|
|
|
2007-11-14 19:40:21 +07:00
|
|
|
int kvm_arch_init(void *opaque);
|
|
|
|
void kvm_arch_exit(void);
|
2007-10-10 22:16:19 +07:00
|
|
|
|
2007-11-14 19:38:21 +07:00
|
|
|
int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu);
|
|
|
|
void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu);
|
|
|
|
|
2014-08-21 23:08:05 +07:00
|
|
|
void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu);
|
|
|
|
|
2007-11-14 19:38:21 +07:00
|
|
|
void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu);
|
|
|
|
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
|
|
|
|
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu);
|
|
|
|
struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id);
|
2007-11-20 20:30:24 +07:00
|
|
|
int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu);
|
2014-12-04 21:47:07 +07:00
|
|
|
void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu);
|
2007-11-20 03:04:43 +07:00
|
|
|
void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu);
|
2007-11-14 19:38:21 +07:00
|
|
|
|
2019-08-03 13:14:25 +07:00
|
|
|
#ifdef __KVM_HAVE_ARCH_VCPU_DEBUGFS
|
2019-08-01 01:56:20 +07:00
|
|
|
void kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu);
|
2019-08-03 13:14:25 +07:00
|
|
|
#endif
|
2016-09-08 01:47:23 +07:00
|
|
|
|
2014-08-28 20:13:03 +07:00
|
|
|
int kvm_arch_hardware_enable(void);
|
|
|
|
void kvm_arch_hardware_disable(void);
|
2007-11-14 19:38:21 +07:00
|
|
|
int kvm_arch_hardware_setup(void);
|
|
|
|
void kvm_arch_hardware_unsetup(void);
|
2019-04-20 12:18:17 +07:00
|
|
|
int kvm_arch_check_processor_compat(void);
|
2007-12-14 08:35:10 +07:00
|
|
|
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu);
|
2017-08-08 11:05:32 +07:00
|
|
|
bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu);
|
2012-03-09 04:44:24 +07:00
|
|
|
int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu);
|
2019-08-05 09:03:19 +07:00
|
|
|
bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu);
|
2007-11-14 19:38:21 +07:00
|
|
|
|
2010-11-09 23:02:49 +07:00
|
|
|
#ifndef __KVM_HAVE_ARCH_VM_ALLOC
|
2018-05-15 18:37:37 +07:00
|
|
|
/*
|
|
|
|
* All architectures that want to use vzalloc currently also
|
|
|
|
* need their own kvm_arch_alloc_vm implementation.
|
|
|
|
*/
|
2010-11-09 23:02:49 +07:00
|
|
|
static inline struct kvm *kvm_arch_alloc_vm(void)
|
|
|
|
{
|
|
|
|
return kzalloc(sizeof(struct kvm), GFP_KERNEL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void kvm_arch_free_vm(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
kfree(kvm);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2018-07-19 15:40:17 +07:00
|
|
|
#ifndef __KVM_HAVE_ARCH_FLUSH_REMOTE_TLB
|
|
|
|
static inline int kvm_arch_flush_remote_tlb(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
return -ENOTSUPP;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2013-10-31 00:02:30 +07:00
|
|
|
#ifdef __KVM_HAVE_ARCH_NONCOHERENT_DMA
|
|
|
|
void kvm_arch_register_noncoherent_dma(struct kvm *kvm);
|
|
|
|
void kvm_arch_unregister_noncoherent_dma(struct kvm *kvm);
|
|
|
|
bool kvm_arch_has_noncoherent_dma(struct kvm *kvm);
|
|
|
|
#else
|
|
|
|
static inline void kvm_arch_register_noncoherent_dma(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void kvm_arch_unregister_noncoherent_dma(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool kvm_arch_has_noncoherent_dma(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
#endif
|
2015-07-07 20:41:58 +07:00
|
|
|
#ifdef __KVM_HAVE_ARCH_ASSIGNED_DEVICE
|
|
|
|
void kvm_arch_start_assignment(struct kvm *kvm);
|
|
|
|
void kvm_arch_end_assignment(struct kvm *kvm);
|
|
|
|
bool kvm_arch_has_assigned_device(struct kvm *kvm);
|
|
|
|
#else
|
|
|
|
static inline void kvm_arch_start_assignment(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void kvm_arch_end_assignment(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool kvm_arch_has_assigned_device(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
#endif
|
2013-10-31 00:02:30 +07:00
|
|
|
|
2016-02-19 15:46:39 +07:00
|
|
|
static inline struct swait_queue_head *kvm_arch_vcpu_wq(struct kvm_vcpu *vcpu)
|
2012-03-09 04:44:24 +07:00
|
|
|
{
|
2012-03-14 04:35:01 +07:00
|
|
|
#ifdef __KVM_HAVE_ARCH_WQP
|
|
|
|
return vcpu->arch.wqp;
|
|
|
|
#else
|
2012-03-09 04:44:24 +07:00
|
|
|
return &vcpu->wq;
|
|
|
|
#endif
|
2012-03-14 04:35:01 +07:00
|
|
|
}
|
2012-03-09 04:44:24 +07:00
|
|
|
|
2015-03-04 17:14:33 +07:00
|
|
|
#ifdef __KVM_HAVE_ARCH_INTC_INITIALIZED
|
|
|
|
/*
|
|
|
|
* returns true if the virtual interrupt controller is initialized and
|
|
|
|
* ready to accept virtual IRQ. On some architectures the virtual interrupt
|
|
|
|
* controller is dynamically instantiated and this is not always true.
|
|
|
|
*/
|
|
|
|
bool kvm_arch_intc_initialized(struct kvm *kvm);
|
|
|
|
#else
|
|
|
|
static inline bool kvm_arch_intc_initialized(struct kvm *kvm)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2012-01-04 16:25:20 +07:00
|
|
|
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type);
|
2007-11-18 17:43:45 +07:00
|
|
|
void kvm_arch_destroy_vm(struct kvm *kvm);
|
2009-01-06 09:03:02 +07:00
|
|
|
void kvm_arch_sync_events(struct kvm *kvm);
|
2007-11-14 19:38:21 +07:00
|
|
|
|
2008-04-12 00:53:26 +07:00
|
|
|
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu);
|
2007-12-17 13:21:40 +07:00
|
|
|
void kvm_vcpu_kick(struct kvm_vcpu *vcpu);
|
2007-12-11 19:36:00 +07:00
|
|
|
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
bool kvm_is_reserved_pfn(kvm_pfn_t pfn);
|
2019-11-12 05:12:27 +07:00
|
|
|
bool kvm_is_zone_device_pfn(kvm_pfn_t pfn);
|
2008-09-27 09:55:40 +07:00
|
|
|
|
2008-09-14 07:48:28 +07:00
|
|
|
struct kvm_irq_ack_notifier {
|
|
|
|
struct hlist_node link;
|
|
|
|
unsigned gsi;
|
|
|
|
void (*irq_acked)(struct kvm_irq_ack_notifier *kian);
|
|
|
|
};
|
|
|
|
|
2014-06-30 17:51:11 +07:00
|
|
|
int kvm_irq_map_gsi(struct kvm *kvm,
|
|
|
|
struct kvm_kernel_irq_routing_entry *entries, int gsi);
|
|
|
|
int kvm_irq_map_chip_pin(struct kvm *kvm, unsigned irqchip, unsigned pin);
|
2014-06-30 17:51:10 +07:00
|
|
|
|
2013-04-11 18:21:40 +07:00
|
|
|
int kvm_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level,
|
|
|
|
bool line_status);
|
2010-11-19 00:09:08 +07:00
|
|
|
int kvm_set_msi(struct kvm_kernel_irq_routing_entry *irq_entry, struct kvm *kvm,
|
2013-04-11 18:21:40 +07:00
|
|
|
int irq_source_id, int level, bool line_status);
|
2015-10-29 01:16:47 +07:00
|
|
|
int kvm_arch_set_irq_inatomic(struct kvm_kernel_irq_routing_entry *e,
|
|
|
|
struct kvm *kvm, int irq_source_id,
|
|
|
|
int level, bool line_status);
|
2013-01-25 09:18:51 +07:00
|
|
|
bool kvm_irq_has_notifier(struct kvm *kvm, unsigned irqchip, unsigned pin);
|
2015-10-16 14:07:46 +07:00
|
|
|
void kvm_notify_acked_gsi(struct kvm *kvm, int gsi);
|
2009-01-28 00:12:38 +07:00
|
|
|
void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin);
|
2008-10-06 12:48:45 +07:00
|
|
|
void kvm_register_irq_ack_notifier(struct kvm *kvm,
|
|
|
|
struct kvm_irq_ack_notifier *kian);
|
2009-06-05 01:08:24 +07:00
|
|
|
void kvm_unregister_irq_ack_notifier(struct kvm *kvm,
|
|
|
|
struct kvm_irq_ack_notifier *kian);
|
2008-10-15 19:15:06 +07:00
|
|
|
int kvm_request_irq_source_id(struct kvm *kvm);
|
|
|
|
void kvm_free_irq_source_id(struct kvm *kvm, int irq_source_id);
|
2019-07-10 07:24:03 +07:00
|
|
|
bool kvm_arch_irqfd_allowed(struct kvm *kvm, struct kvm_irqfd *args);
|
2008-09-14 07:48:28 +07:00
|
|
|
|
2012-01-13 03:09:51 +07:00
|
|
|
/*
|
|
|
|
* search_memslots() and __gfn_to_memslot() are here because they are
|
|
|
|
* used in non-modular code in arch/powerpc/kvm/book3s_hv_rm_mmu.c.
|
|
|
|
* gfn_to_memslot() itself isn't here as an inline because that would
|
|
|
|
* bloat other code too much.
|
|
|
|
*/
|
|
|
|
static inline struct kvm_memory_slot *
|
|
|
|
search_memslots(struct kvm_memslots *slots, gfn_t gfn)
|
|
|
|
{
|
2014-12-02 00:29:27 +07:00
|
|
|
int start = 0, end = slots->used_slots;
|
2014-12-02 00:29:25 +07:00
|
|
|
int slot = atomic_read(&slots->lru_slot);
|
2014-12-02 00:29:27 +07:00
|
|
|
struct kvm_memory_slot *memslots = slots->memslots;
|
|
|
|
|
|
|
|
if (gfn >= memslots[slot].base_gfn &&
|
|
|
|
gfn < memslots[slot].base_gfn + memslots[slot].npages)
|
|
|
|
return &memslots[slot];
|
|
|
|
|
|
|
|
while (start < end) {
|
|
|
|
slot = start + (end - start) / 2;
|
|
|
|
|
|
|
|
if (gfn >= memslots[slot].base_gfn)
|
|
|
|
end = slot;
|
|
|
|
else
|
|
|
|
start = slot + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (gfn >= memslots[start].base_gfn &&
|
|
|
|
gfn < memslots[start].base_gfn + memslots[start].npages) {
|
|
|
|
atomic_set(&slots->lru_slot, start);
|
|
|
|
return &memslots[start];
|
|
|
|
}
|
2012-01-13 03:09:51 +07:00
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct kvm_memory_slot *
|
|
|
|
__gfn_to_memslot(struct kvm_memslots *slots, gfn_t gfn)
|
|
|
|
{
|
|
|
|
return search_memslots(slots, gfn);
|
|
|
|
}
|
|
|
|
|
2012-08-24 15:50:28 +07:00
|
|
|
static inline unsigned long
|
|
|
|
__gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn)
|
|
|
|
{
|
|
|
|
return slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE;
|
|
|
|
}
|
|
|
|
|
2011-03-09 14:41:59 +07:00
|
|
|
static inline int memslot_id(struct kvm *kvm, gfn_t gfn)
|
|
|
|
{
|
|
|
|
return gfn_to_memslot(kvm, gfn)->id;
|
|
|
|
}
|
|
|
|
|
2012-07-02 15:54:30 +07:00
|
|
|
static inline gfn_t
|
|
|
|
hva_to_gfn_memslot(unsigned long hva, struct kvm_memory_slot *slot)
|
2010-08-22 18:10:28 +07:00
|
|
|
{
|
2012-07-02 15:54:30 +07:00
|
|
|
gfn_t gfn_offset = (hva - slot->userspace_addr) >> PAGE_SHIFT;
|
|
|
|
|
|
|
|
return slot->base_gfn + gfn_offset;
|
2010-08-22 18:10:28 +07:00
|
|
|
}
|
|
|
|
|
2007-11-21 19:44:45 +07:00
|
|
|
static inline gpa_t gfn_to_gpa(gfn_t gfn)
|
|
|
|
{
|
|
|
|
return (gpa_t)gfn << PAGE_SHIFT;
|
|
|
|
}
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 17:21:36 +07:00
|
|
|
|
2010-09-10 22:30:48 +07:00
|
|
|
static inline gfn_t gpa_to_gfn(gpa_t gpa)
|
|
|
|
{
|
|
|
|
return (gfn_t)(gpa >> PAGE_SHIFT);
|
|
|
|
}
|
|
|
|
|
kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace). This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o. It allows userspace to coordinate
DMA/RDMA from/to persistent memory.
The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver. The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.
The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.
Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array. Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory. The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.
This patch (of 18):
The core has developed a need for a "pfn_t" type [1]. Move the existing
pfn_t in KVM to kvm_pfn_t [2].
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:56:11 +07:00
|
|
|
static inline hpa_t pfn_to_hpa(kvm_pfn_t pfn)
|
2008-09-14 07:48:28 +07:00
|
|
|
{
|
|
|
|
return (hpa_t)pfn << PAGE_SHIFT;
|
|
|
|
}
|
|
|
|
|
2017-08-03 23:11:04 +07:00
|
|
|
static inline struct page *kvm_vcpu_gpa_to_page(struct kvm_vcpu *vcpu,
|
|
|
|
gpa_t gpa)
|
|
|
|
{
|
|
|
|
return kvm_vcpu_gfn_to_page(vcpu, gpa_to_gfn(gpa));
|
|
|
|
}
|
|
|
|
|
2014-01-01 22:09:21 +07:00
|
|
|
static inline bool kvm_is_error_gpa(struct kvm *kvm, gpa_t gpa)
|
|
|
|
{
|
|
|
|
unsigned long hva = gfn_to_hva(kvm, gpa_to_gfn(gpa));
|
|
|
|
|
|
|
|
return kvm_is_error_hva(hva);
|
|
|
|
}
|
|
|
|
|
2007-11-18 21:24:12 +07:00
|
|
|
enum kvm_stat_kind {
|
|
|
|
KVM_STAT_VM,
|
|
|
|
KVM_STAT_VCPU,
|
|
|
|
};
|
|
|
|
|
2016-05-18 18:26:23 +07:00
|
|
|
struct kvm_stat_data {
|
|
|
|
int offset;
|
2019-09-30 23:48:44 +07:00
|
|
|
int mode;
|
2016-05-18 18:26:23 +07:00
|
|
|
struct kvm *kvm;
|
|
|
|
};
|
|
|
|
|
2007-11-01 05:24:23 +07:00
|
|
|
struct kvm_stats_debugfs_item {
|
|
|
|
const char *name;
|
|
|
|
int offset;
|
2007-11-18 21:24:12 +07:00
|
|
|
enum kvm_stat_kind kind;
|
2019-09-30 23:48:44 +07:00
|
|
|
int mode;
|
2007-11-01 05:24:23 +07:00
|
|
|
};
|
|
|
|
extern struct kvm_stats_debugfs_item debugfs_entries[];
|
2008-04-16 04:05:42 +07:00
|
|
|
extern struct dentry *kvm_debugfs_dir;
|
2008-04-10 19:47:53 +07:00
|
|
|
|
2012-06-16 02:07:24 +07:00
|
|
|
#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
|
2012-10-15 10:10:18 +07:00
|
|
|
static inline int mmu_notifier_retry(struct kvm *kvm, unsigned long mmu_seq)
|
2008-07-25 21:24:52 +07:00
|
|
|
{
|
2012-10-15 10:10:18 +07:00
|
|
|
if (unlikely(kvm->mmu_notifier_count))
|
2008-07-25 21:24:52 +07:00
|
|
|
return 1;
|
|
|
|
/*
|
2011-12-12 19:37:21 +07:00
|
|
|
* Ensure the read of mmu_notifier_count happens before the read
|
|
|
|
* of mmu_notifier_seq. This interacts with the smp_wmb() in
|
|
|
|
* mmu_notifier_invalidate_range_end to make sure that the caller
|
|
|
|
* either sees the old (non-zero) value of mmu_notifier_count or
|
|
|
|
* the new (incremented) value of mmu_notifier_seq.
|
|
|
|
* PowerPC Book3s HV KVM calls this under a per-page lock
|
|
|
|
* rather than under kvm->mmu_lock, for scalability, so
|
|
|
|
* can't rely on kvm->mmu_lock to keep things ordered.
|
2008-07-25 21:24:52 +07:00
|
|
|
*/
|
2011-12-12 19:37:21 +07:00
|
|
|
smp_rmb();
|
2012-10-15 10:10:18 +07:00
|
|
|
if (kvm->mmu_notifier_seq != mmu_seq)
|
2008-07-25 21:24:52 +07:00
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2013-04-17 18:29:30 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_IRQ_ROUTING
|
2008-11-19 18:58:46 +07:00
|
|
|
|
2018-04-27 07:55:03 +07:00
|
|
|
#define KVM_MAX_IRQ_ROUTES 4096 /* might need extension/rework in the future */
|
2008-11-19 18:58:46 +07:00
|
|
|
|
2017-04-28 22:06:20 +07:00
|
|
|
bool kvm_arch_can_set_irq_routing(struct kvm *kvm);
|
2008-11-19 18:58:46 +07:00
|
|
|
int kvm_set_irq_routing(struct kvm *kvm,
|
|
|
|
const struct kvm_irq_routing_entry *entries,
|
|
|
|
unsigned nr,
|
|
|
|
unsigned flags);
|
2016-07-13 03:09:26 +07:00
|
|
|
int kvm_set_routing_entry(struct kvm *kvm,
|
|
|
|
struct kvm_kernel_irq_routing_entry *e,
|
2013-04-16 04:23:21 +07:00
|
|
|
const struct kvm_irq_routing_entry *ue);
|
2008-11-19 18:58:46 +07:00
|
|
|
void kvm_free_irq_routing(struct kvm *kvm);
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
static inline void kvm_free_irq_routing(struct kvm *kvm) {}
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
2014-06-30 17:51:13 +07:00
|
|
|
int kvm_send_userspace_msi(struct kvm *kvm, struct kvm_msi *msi);
|
|
|
|
|
2009-05-20 21:30:49 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_EVENTFD
|
|
|
|
|
KVM: add ioeventfd support
ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd
signal when written to by a guest. Host userspace can register any
arbitrary IO address with a corresponding eventfd and then pass the eventfd
to a specific end-point of interest for handling.
Normal IO requires a blocking round-trip since the operation may cause
side-effects in the emulated model or may return data to the caller.
Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM
"heavy-weight" exit back to userspace, and is ultimately serviced by qemu's
device model synchronously before returning control back to the vcpu.
However, there is a subclass of IO which acts purely as a trigger for
other IO (such as to kick off an out-of-band DMA request, etc). For these
patterns, the synchronous call is particularly expensive since we really
only want to simply get our notification transmitted asychronously and
return as quickly as possible. All the sychronous infrastructure to ensure
proper data-dependencies are met in the normal IO case are just unecessary
overhead for signalling. This adds additional computational load on the
system, as well as latency to the signalling path.
Therefore, we provide a mechanism for registration of an in-kernel trigger
point that allows the VCPU to only require a very brief, lightweight
exit just long enough to signal an eventfd. This also means that any
clients compatible with the eventfd interface (which includes userspace
and kernelspace equally well) can now register to be notified. The end
result should be a more flexible and higher performance notification API
for the backend KVM hypervisor and perhipheral components.
To test this theory, we built a test-harness called "doorbell". This
module has a function called "doorbell_ring()" which simply increments a
counter for each time the doorbell is signaled. It supports signalling
from either an eventfd, or an ioctl().
We then wired up two paths to the doorbell: One via QEMU via a registered
io region and through the doorbell ioctl(). The other is direct via
ioeventfd.
You can download this test harness here:
ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2
The measured results are as follows:
qemu-mmio: 110000 iops, 9.09us rtt
ioeventfd-mmio: 200100 iops, 5.00us rtt
ioeventfd-pio: 367300 iops, 2.72us rtt
I didn't measure qemu-pio, because I have to figure out how to register a
PIO region with qemu's device model, and I got lazy. However, for now we
can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO,
and -350ns for HC, we get:
qemu-pio: 153139 iops, 6.53us rtt
ioeventfd-hc: 412585 iops, 2.37us rtt
these are just for fun, for now, until I can gather more data.
Here is a graph for your convenience:
http://developer.novell.com/wiki/images/7/76/Iofd-chart.png
The conclusion to draw is that we save about 4us by skipping the userspace
hop.
--------------------
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
|
|
|
void kvm_eventfd_init(struct kvm *kvm);
|
2012-10-09 05:22:59 +07:00
|
|
|
int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args);
|
|
|
|
|
2014-06-30 17:51:13 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_IRQFD
|
2012-06-29 22:56:08 +07:00
|
|
|
int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args);
|
2009-05-20 21:30:49 +07:00
|
|
|
void kvm_irqfd_release(struct kvm *kvm);
|
2014-06-30 17:51:11 +07:00
|
|
|
void kvm_irq_routing_update(struct kvm *);
|
2012-10-09 05:22:59 +07:00
|
|
|
#else
|
|
|
|
static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
|
|
|
|
{
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void kvm_irqfd_release(struct kvm *kvm) {}
|
|
|
|
#endif
|
2009-05-20 21:30:49 +07:00
|
|
|
|
|
|
|
#else
|
|
|
|
|
KVM: add ioeventfd support
ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd
signal when written to by a guest. Host userspace can register any
arbitrary IO address with a corresponding eventfd and then pass the eventfd
to a specific end-point of interest for handling.
Normal IO requires a blocking round-trip since the operation may cause
side-effects in the emulated model or may return data to the caller.
Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM
"heavy-weight" exit back to userspace, and is ultimately serviced by qemu's
device model synchronously before returning control back to the vcpu.
However, there is a subclass of IO which acts purely as a trigger for
other IO (such as to kick off an out-of-band DMA request, etc). For these
patterns, the synchronous call is particularly expensive since we really
only want to simply get our notification transmitted asychronously and
return as quickly as possible. All the sychronous infrastructure to ensure
proper data-dependencies are met in the normal IO case are just unecessary
overhead for signalling. This adds additional computational load on the
system, as well as latency to the signalling path.
Therefore, we provide a mechanism for registration of an in-kernel trigger
point that allows the VCPU to only require a very brief, lightweight
exit just long enough to signal an eventfd. This also means that any
clients compatible with the eventfd interface (which includes userspace
and kernelspace equally well) can now register to be notified. The end
result should be a more flexible and higher performance notification API
for the backend KVM hypervisor and perhipheral components.
To test this theory, we built a test-harness called "doorbell". This
module has a function called "doorbell_ring()" which simply increments a
counter for each time the doorbell is signaled. It supports signalling
from either an eventfd, or an ioctl().
We then wired up two paths to the doorbell: One via QEMU via a registered
io region and through the doorbell ioctl(). The other is direct via
ioeventfd.
You can download this test harness here:
ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2
The measured results are as follows:
qemu-mmio: 110000 iops, 9.09us rtt
ioeventfd-mmio: 200100 iops, 5.00us rtt
ioeventfd-pio: 367300 iops, 2.72us rtt
I didn't measure qemu-pio, because I have to figure out how to register a
PIO region with qemu's device model, and I got lazy. However, for now we
can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO,
and -350ns for HC, we get:
qemu-pio: 153139 iops, 6.53us rtt
ioeventfd-hc: 412585 iops, 2.37us rtt
these are just for fun, for now, until I can gather more data.
Here is a graph for your convenience:
http://developer.novell.com/wiki/images/7/76/Iofd-chart.png
The conclusion to draw is that we save about 4us by skipping the userspace
hop.
--------------------
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
|
|
|
static inline void kvm_eventfd_init(struct kvm *kvm) {}
|
2010-11-19 00:09:08 +07:00
|
|
|
|
2012-06-29 22:56:08 +07:00
|
|
|
static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
|
2009-05-20 21:30:49 +07:00
|
|
|
{
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void kvm_irqfd_release(struct kvm *kvm) {}
|
2010-11-19 00:09:08 +07:00
|
|
|
|
2010-11-25 16:25:44 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_IRQCHIP
|
2014-06-30 17:51:11 +07:00
|
|
|
static inline void kvm_irq_routing_update(struct kvm *kvm)
|
2010-11-19 00:09:08 +07:00
|
|
|
{
|
|
|
|
}
|
2010-11-25 16:25:44 +07:00
|
|
|
#endif
|
2010-11-19 00:09:08 +07:00
|
|
|
|
KVM: add ioeventfd support
ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd
signal when written to by a guest. Host userspace can register any
arbitrary IO address with a corresponding eventfd and then pass the eventfd
to a specific end-point of interest for handling.
Normal IO requires a blocking round-trip since the operation may cause
side-effects in the emulated model or may return data to the caller.
Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM
"heavy-weight" exit back to userspace, and is ultimately serviced by qemu's
device model synchronously before returning control back to the vcpu.
However, there is a subclass of IO which acts purely as a trigger for
other IO (such as to kick off an out-of-band DMA request, etc). For these
patterns, the synchronous call is particularly expensive since we really
only want to simply get our notification transmitted asychronously and
return as quickly as possible. All the sychronous infrastructure to ensure
proper data-dependencies are met in the normal IO case are just unecessary
overhead for signalling. This adds additional computational load on the
system, as well as latency to the signalling path.
Therefore, we provide a mechanism for registration of an in-kernel trigger
point that allows the VCPU to only require a very brief, lightweight
exit just long enough to signal an eventfd. This also means that any
clients compatible with the eventfd interface (which includes userspace
and kernelspace equally well) can now register to be notified. The end
result should be a more flexible and higher performance notification API
for the backend KVM hypervisor and perhipheral components.
To test this theory, we built a test-harness called "doorbell". This
module has a function called "doorbell_ring()" which simply increments a
counter for each time the doorbell is signaled. It supports signalling
from either an eventfd, or an ioctl().
We then wired up two paths to the doorbell: One via QEMU via a registered
io region and through the doorbell ioctl(). The other is direct via
ioeventfd.
You can download this test harness here:
ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2
The measured results are as follows:
qemu-mmio: 110000 iops, 9.09us rtt
ioeventfd-mmio: 200100 iops, 5.00us rtt
ioeventfd-pio: 367300 iops, 2.72us rtt
I didn't measure qemu-pio, because I have to figure out how to register a
PIO region with qemu's device model, and I got lazy. However, for now we
can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO,
and -350ns for HC, we get:
qemu-pio: 153139 iops, 6.53us rtt
ioeventfd-hc: 412585 iops, 2.37us rtt
these are just for fun, for now, until I can gather more data.
Here is a graph for your convenience:
http://developer.novell.com/wiki/images/7/76/Iofd-chart.png
The conclusion to draw is that we save about 4us by skipping the userspace
hop.
--------------------
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
|
|
|
static inline int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
|
|
|
|
{
|
|
|
|
return -ENOSYS;
|
|
|
|
}
|
2009-05-20 21:30:49 +07:00
|
|
|
|
|
|
|
#endif /* CONFIG_HAVE_KVM_EVENTFD */
|
|
|
|
|
2018-02-22 19:05:41 +07:00
|
|
|
void kvm_arch_irq_routing_update(struct kvm *kvm);
|
|
|
|
|
2010-05-10 16:34:53 +07:00
|
|
|
static inline void kvm_make_request(int req, struct kvm_vcpu *vcpu)
|
|
|
|
{
|
2016-03-10 22:30:22 +07:00
|
|
|
/*
|
|
|
|
* Ensure the rest of the request is published to kvm_check_request's
|
|
|
|
* caller. Paired with the smp_mb__after_atomic in kvm_check_request.
|
|
|
|
*/
|
|
|
|
smp_wmb();
|
2018-07-10 16:27:19 +07:00
|
|
|
set_bit(req & KVM_REQUEST_MASK, (void *)&vcpu->requests);
|
2010-05-10 16:34:53 +07:00
|
|
|
}
|
|
|
|
|
2017-06-04 19:43:52 +07:00
|
|
|
static inline bool kvm_request_pending(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return READ_ONCE(vcpu->requests);
|
|
|
|
}
|
|
|
|
|
2017-04-27 03:32:19 +07:00
|
|
|
static inline bool kvm_test_request(int req, struct kvm_vcpu *vcpu)
|
|
|
|
{
|
2018-07-10 16:27:19 +07:00
|
|
|
return test_bit(req & KVM_REQUEST_MASK, (void *)&vcpu->requests);
|
2017-04-27 03:32:19 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void kvm_clear_request(int req, struct kvm_vcpu *vcpu)
|
|
|
|
{
|
2018-07-10 16:27:19 +07:00
|
|
|
clear_bit(req & KVM_REQUEST_MASK, (void *)&vcpu->requests);
|
2017-04-27 03:32:19 +07:00
|
|
|
}
|
|
|
|
|
2010-05-10 16:34:53 +07:00
|
|
|
static inline bool kvm_check_request(int req, struct kvm_vcpu *vcpu)
|
|
|
|
{
|
2017-04-27 03:32:19 +07:00
|
|
|
if (kvm_test_request(req, vcpu)) {
|
|
|
|
kvm_clear_request(req, vcpu);
|
2016-03-10 22:30:22 +07:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Ensure the rest of the request is visible to kvm_check_request's
|
|
|
|
* caller. Paired with the smp_wmb in kvm_make_request.
|
|
|
|
*/
|
|
|
|
smp_mb__after_atomic();
|
2010-05-10 17:08:26 +07:00
|
|
|
return true;
|
|
|
|
} else {
|
|
|
|
return false;
|
|
|
|
}
|
2010-05-10 16:34:53 +07:00
|
|
|
}
|
|
|
|
|
2013-04-06 02:20:30 +07:00
|
|
|
extern bool kvm_rebooting;
|
|
|
|
|
2016-10-14 07:53:19 +07:00
|
|
|
extern unsigned int halt_poll_ns;
|
|
|
|
extern unsigned int halt_poll_ns_grow;
|
2019-01-27 17:17:15 +07:00
|
|
|
extern unsigned int halt_poll_ns_grow_start;
|
2016-10-14 07:53:19 +07:00
|
|
|
extern unsigned int halt_poll_ns_shrink;
|
|
|
|
|
2013-04-12 21:08:42 +07:00
|
|
|
struct kvm_device {
|
2019-10-21 22:28:19 +07:00
|
|
|
const struct kvm_device_ops *ops;
|
2013-04-12 21:08:42 +07:00
|
|
|
struct kvm *kvm;
|
|
|
|
void *private;
|
2013-04-25 21:11:23 +07:00
|
|
|
struct list_head vm_node;
|
2013-04-12 21:08:42 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* create, destroy, and name are mandatory */
|
|
|
|
struct kvm_device_ops {
|
|
|
|
const char *name;
|
2016-08-10 00:13:01 +07:00
|
|
|
|
|
|
|
/*
|
|
|
|
* create is called holding kvm->lock and any operations not suitable
|
|
|
|
* to do while holding the lock should be deferred to init (see
|
|
|
|
* below).
|
|
|
|
*/
|
2013-04-12 21:08:42 +07:00
|
|
|
int (*create)(struct kvm_device *dev, u32 type);
|
|
|
|
|
2016-08-10 00:13:00 +07:00
|
|
|
/*
|
|
|
|
* init is called after create if create is successful and is called
|
|
|
|
* outside of holding kvm->lock.
|
|
|
|
*/
|
|
|
|
void (*init)(struct kvm_device *dev);
|
|
|
|
|
2013-04-12 21:08:42 +07:00
|
|
|
/*
|
|
|
|
* Destroy is responsible for freeing dev.
|
|
|
|
*
|
|
|
|
* Destroy may be called before or after destructors are called
|
|
|
|
* on emulated I/O regions, depending on whether a reference is
|
|
|
|
* held by a vcpu or other kvm component that gets destroyed
|
|
|
|
* after the emulated I/O.
|
|
|
|
*/
|
|
|
|
void (*destroy)(struct kvm_device *dev);
|
|
|
|
|
2019-04-18 17:39:41 +07:00
|
|
|
/*
|
|
|
|
* Release is an alternative method to free the device. It is
|
|
|
|
* called when the device file descriptor is closed. Once
|
|
|
|
* release is called, the destroy method will not be called
|
|
|
|
* anymore as the device is removed from the device list of
|
|
|
|
* the VM. kvm->lock is held.
|
|
|
|
*/
|
|
|
|
void (*release)(struct kvm_device *dev);
|
|
|
|
|
2013-04-12 21:08:42 +07:00
|
|
|
int (*set_attr)(struct kvm_device *dev, struct kvm_device_attr *attr);
|
|
|
|
int (*get_attr)(struct kvm_device *dev, struct kvm_device_attr *attr);
|
|
|
|
int (*has_attr)(struct kvm_device *dev, struct kvm_device_attr *attr);
|
|
|
|
long (*ioctl)(struct kvm_device *dev, unsigned int ioctl,
|
|
|
|
unsigned long arg);
|
2019-04-18 17:39:36 +07:00
|
|
|
int (*mmap)(struct kvm_device *dev, struct vm_area_struct *vma);
|
2013-04-12 21:08:42 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
void kvm_device_get(struct kvm_device *dev);
|
|
|
|
void kvm_device_put(struct kvm_device *dev);
|
|
|
|
struct kvm_device *kvm_device_from_filp(struct file *filp);
|
2019-10-21 22:28:19 +07:00
|
|
|
int kvm_register_device_ops(const struct kvm_device_ops *ops, u32 type);
|
2014-10-09 17:30:08 +07:00
|
|
|
void kvm_unregister_device_ops(u32 type);
|
2013-04-12 21:08:42 +07:00
|
|
|
|
2013-04-12 21:08:46 +07:00
|
|
|
extern struct kvm_device_ops kvm_mpic_ops;
|
2014-10-27 06:17:00 +07:00
|
|
|
extern struct kvm_device_ops kvm_arm_vgic_v2_ops;
|
2014-06-07 05:54:51 +07:00
|
|
|
extern struct kvm_device_ops kvm_arm_vgic_v3_ops;
|
2013-04-12 21:08:46 +07:00
|
|
|
|
2012-07-18 20:37:46 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT
|
|
|
|
|
|
|
|
static inline void kvm_vcpu_set_in_spin_loop(struct kvm_vcpu *vcpu, bool val)
|
|
|
|
{
|
|
|
|
vcpu->spin_loop.in_spin_loop = val;
|
|
|
|
}
|
|
|
|
static inline void kvm_vcpu_set_dy_eligible(struct kvm_vcpu *vcpu, bool val)
|
|
|
|
{
|
|
|
|
vcpu->spin_loop.dy_eligible = val;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else /* !CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT */
|
|
|
|
|
|
|
|
static inline void kvm_vcpu_set_in_spin_loop(struct kvm_vcpu *vcpu, bool val)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void kvm_vcpu_set_dy_eligible(struct kvm_vcpu *vcpu, bool val)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT */
|
2015-09-18 21:29:43 +07:00
|
|
|
|
|
|
|
#ifdef CONFIG_HAVE_KVM_IRQ_BYPASS
|
2016-05-06 00:58:35 +07:00
|
|
|
bool kvm_arch_has_irq_bypass(void);
|
2015-09-18 21:29:43 +07:00
|
|
|
int kvm_arch_irq_bypass_add_producer(struct irq_bypass_consumer *,
|
|
|
|
struct irq_bypass_producer *);
|
|
|
|
void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *,
|
|
|
|
struct irq_bypass_producer *);
|
|
|
|
void kvm_arch_irq_bypass_stop(struct irq_bypass_consumer *);
|
|
|
|
void kvm_arch_irq_bypass_start(struct irq_bypass_consumer *);
|
2015-09-18 21:29:53 +07:00
|
|
|
int kvm_arch_update_irqfd_routing(struct kvm *kvm, unsigned int host_irq,
|
|
|
|
uint32_t guest_irq, bool set);
|
2015-09-18 21:29:43 +07:00
|
|
|
#endif /* CONFIG_HAVE_KVM_IRQ_BYPASS */
|
2015-10-20 14:39:03 +07:00
|
|
|
|
2016-05-13 17:16:35 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_INVALID_WAKEUPS
|
|
|
|
/* If we wakeup during the poll time, was it a sucessful poll? */
|
|
|
|
static inline bool vcpu_valid_wakeup(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return vcpu->valid_wakeup;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
static inline bool vcpu_valid_wakeup(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_HAVE_KVM_INVALID_WAKEUPS */
|
|
|
|
|
2019-03-05 17:30:01 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_NO_POLL
|
|
|
|
/* Callback that tells if we must not poll */
|
|
|
|
bool kvm_arch_no_poll(struct kvm_vcpu *vcpu);
|
|
|
|
#else
|
|
|
|
static inline bool kvm_arch_no_poll(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_HAVE_KVM_NO_POLL */
|
|
|
|
|
2017-12-12 23:41:34 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL
|
|
|
|
long kvm_arch_vcpu_async_ioctl(struct file *filp,
|
|
|
|
unsigned int ioctl, unsigned long arg);
|
|
|
|
#else
|
|
|
|
static inline long kvm_arch_vcpu_async_ioctl(struct file *filp,
|
|
|
|
unsigned int ioctl,
|
|
|
|
unsigned long arg)
|
|
|
|
{
|
|
|
|
return -ENOIOCTLCMD;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL */
|
|
|
|
|
2018-08-22 11:52:33 +07:00
|
|
|
int kvm_arch_mmu_notifier_invalidate_range(struct kvm *kvm,
|
|
|
|
unsigned long start, unsigned long end, bool blockable);
|
2018-02-22 19:04:39 +07:00
|
|
|
|
2018-02-23 23:23:57 +07:00
|
|
|
#ifdef CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE
|
|
|
|
int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu);
|
|
|
|
#else
|
|
|
|
static inline int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE */
|
|
|
|
|
2019-11-04 18:22:02 +07:00
|
|
|
typedef int (*kvm_vm_thread_fn_t)(struct kvm *kvm, uintptr_t data);
|
|
|
|
|
|
|
|
int kvm_vm_create_worker_thread(struct kvm *kvm, kvm_vm_thread_fn_t thread_fn,
|
|
|
|
uintptr_t data, const char *name,
|
|
|
|
struct task_struct **thread_ptr);
|
|
|
|
|
2009-08-26 18:57:50 +07:00
|
|
|
#endif
|