linux_dsm_epyc7002/drivers/mmc/core/Makefile

#
# Makefile for the kernel mmc core.
#

obj-$(CONFIG_MMC)		+= mmc_core.o
mmc_core-y			:= core.o bus.o host.o \
				   mmc.o mmc_ops.o sd.o sd_ops.o \
				   sdio.o sdio_ops.o sdio_bus.o \
				   sdio_cis.o sdio_io.o sdio_irq.o \
				   quirks.o slot-gpio.o
mmc_core-$(CONFIG_OF)		+= pwrseq.o pwrseq_simple.o pwrseq_emmc.o
mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o
mmc: Move core functions to subdir Create a "core" subdirectory to house the central bus handling functions. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 2007-02-28 21:33:10 +07:00			`#`
			`# Makefile for the kernel mmc core.`
			`#`

			`obj-$(CONFIG_MMC) += mmc_core.o`
mmc: use sysfs groups to handle conditional attributes Suppressing uevents turned out to be a bad idea as it screws up the order of events, making user space very confused. Change the system to use sysfs groups instead. This is a regression that, for some odd reason, has gone unnoticed for some time. It confuses hal so that the block devices (which have the mmc device as a parent) are not registered. End result being that desktop magic when cards are inserted won't work. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 2008-03-22 05:54:50 +07:00			`mmc_core-y := core.o bus.o host.o \`
mmc: detect SDIO cards Really basic init sequence for SDIO cards. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 2007-05-22 01:23:20 +07:00			`mmc.o mmc_ops.o sd.o sd_ops.o \`
mmc: add basic SDIO I/O operations Add command wrappers that simplify register access from SDIO function drivers. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 2007-05-27 17:57:15 +07:00			`sdio.o sdio_ops.o sdio_bus.o \`
mmc: add per device quirk placeholder Some cards have quirks valid for every platforms using current platform quirk hooks leads to a lot of code and debug duplication. So we inspire a bit from what exists in PCI subsystem and do our own per vendorid/deviceid quirk. We still drop the complexity of the pci quirk system (with special section tables, and so on). That can be added later if needed. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org> 2011-02-07 01:03:46 +07:00			`sdio_cis.o sdio_io.o sdio_irq.o \`
mmc: extend and rename cd-gpio helpers to handle more slot GPIO functions GPIOs can be used in MMC/SD-card slots not only for hotplug detection, but also to implement the write-protection pin. Rename cd-gpio helpers to slot-gpio to make addition of further slot GPIO functions possible. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> 2012-05-01 04:31:57 +07:00			`quirks.o slot-gpio.o`
mmc: pwrseq: add driver for emmc hardware reset This patch provides a simple mmc-pwrseq-emmc driver, which controls single gpio line. It perform standard eMMC hw reset procedure, as descibed by Jedec 4.4 specification. This procedure is performed just after MMC core enabled power to the given mmc host (to fix possible issues if bootloader has left eMMC card in initialized or unknown state), and before performing complete system reboot (also in case of emergency reboot call). The latter is needed on boards, which doesn't have hardware reset logic connected to emmc card and (limited or broken) ROM bootloaders are unable to read second stage from the emmc card if the card is left in unknown or already initialized state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 2015-02-03 20:07:53 +07:00			`mmc_core-$(CONFIG_OF) += pwrseq.o pwrseq_simple.o pwrseq_emmc.o`
mmc: Export internal host state through debugfs When CONFIG_DEBUG_FS is set, create a few files under /sys/kernel/debug containing information about an mmc host's internal state. Currently, just a single file is created, "ios", which contains information about the current operating parameters for the bus (clock speed, bus width, etc.) Host drivers can add additional files and directories under the host's root directory by passing the debugfs_root field in struct mmc_host as the 'parent' parameter to debugfs_create_*. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 2008-07-24 19:18:57 +07:00			`mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o`