linux_dsm_epyc7002/arch/mips/vdso/gettimeofday.c

270 lines
5.5 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 15:57:44 +07:00
/*
* Copyright (C) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
*/
#include "vdso.h"
#include <linux/compiler.h>
#include <linux/time.h>
#include <asm/clocksource.h>
#include <asm/io.h>
#include <asm/unistd.h>
#include <asm/vdso.h>
#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
static __always_inline long gettimeofday_fallback(struct timeval *_tv,
struct timezone *_tz)
{
register struct timezone *tz asm("a1") = _tz;
register struct timeval *tv asm("a0") = _tv;
register long ret asm("v0");
register long nr asm("v0") = __NR_gettimeofday;
register long error asm("a3");
asm volatile(
" syscall\n"
: "=r" (ret), "=r" (error)
: "r" (tv), "r" (tz), "r" (nr)
: "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13",
"$14", "$15", "$24", "$25", "hi", "lo", "memory");
return error ? -ret : ret;
}
#endif
static __always_inline long clock_gettime_fallback(clockid_t _clkid,
struct timespec *_ts)
{
register struct timespec *ts asm("a1") = _ts;
register clockid_t clkid asm("a0") = _clkid;
register long ret asm("v0");
register long nr asm("v0") = __NR_clock_gettime;
register long error asm("a3");
asm volatile(
" syscall\n"
: "=r" (ret), "=r" (error)
: "r" (clkid), "r" (ts), "r" (nr)
: "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13",
"$14", "$15", "$24", "$25", "hi", "lo", "memory");
return error ? -ret : ret;
}
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 15:57:44 +07:00
static __always_inline int do_realtime_coarse(struct timespec *ts,
const union mips_vdso_data *data)
{
u32 start_seq;
do {
start_seq = vdso_data_read_begin(data);
ts->tv_sec = data->xtime_sec;
ts->tv_nsec = data->xtime_nsec >> data->cs_shift;
} while (vdso_data_read_retry(data, start_seq));
return 0;
}
static __always_inline int do_monotonic_coarse(struct timespec *ts,
const union mips_vdso_data *data)
{
u32 start_seq;
MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() Fix incorrect calculation in do_monotonic() and do_monotonic_coarse() function that in turn caused incorrect values returned by the vdso version of system call clock_gettime() on mips64 if its system clock ID parameter was CLOCK_MONOTONIC or CLOCK_MONOTONIC_COARSE. Consider these variables and their types on mips32 and mips64: tk->wall_to_monotonic.tv_sec s64, s64 (kernel/vdso.c) vdso_data.wall_to_mono_sec u32, u32 (kernel/vdso.c) to_mono_sec u32, u32 (vdso/gettimeofday.c) ts->tv_sec s32, s64 (vdso/gettimeofday.c) For mips64 case, u32 vdso_data.wall_to_mono_sec variable is updated from the 64-bit signed variable tk->wall_to_monotonic.tv_sec (kernel/vdso.c:76) which is a negative number holding the time passed from 1970-01-01 to the time boot started. This 64-bit signed value is currently around 47+ years, in seconds. For instance, let this value be: -1489757461 or 11111111111111111111111111111111 10100111001101000001101011101011 By updating 32-bit vdso_data.wall_to_mono_sec variable, we lose upper 32 bits (signed 1's). to_mono_sec variable is a parameter of do_monotonic() and do_monotonic_coarse() functions which holds vdso_data.wall_to_mono_sec value. Its value needs to be added (or subtracted considering it holds negative value from the tk->wall_to_monotonic.tv_sec) to the current time passed from 1970-01-01 (ts->tv_sec), which is again something like 47+ years, but increased by the time passed from the boot to the current time. ts->tv_sec is 32-bit long in case of 32-bit architecture and 64-bit long in case of 64-bit architecture. Consider the update of ts->tv_sec (vdso/gettimeofday.c:55 & 167): ts->tv_sec += to_mono_sec; mips32 case: This update will be performed correctly, since both ts->tv_sec and to_mono_sec are 32-bit long and the sign in to_mono_sec is preserved. Implicit conversion from u32 to s32 will be done correctly. mips64 case: This update will be wrong, since the implicit conversion will not be done correctly. The reason is that the conversion will be from u32 to s64. This is because to_mono_sec is 32-bit long for both mips32 and mips64 cases and s64..33 bits of converted to_mono_sec variable will be zeros. So, in order to make MIPS64 implementation work properly for MONOTONIC and MONOTONIC_COARSE clock ids on mips64, the size of wall_to_mono_sec variable in mips_vdso_data union and respective parameters in do_monotonic() and do_monotonic_coarse() functions should be changed from u32 to u64. Because of consistency, this size change from u32 and u64 is also done for wall_to_mono_nsec variable and corresponding function parameters. As far as similar situations for other architectures are concerned, let's take a look at arm. Arm has two distinct vdso_data structures for 32-bit & 64-bit cases, and arm's wall_to_mono_sec and wall_to_mono_nsec are u32 for 32-bit and u64 for 64-bit cases. On the other hand, MIPS has only one structure (mips_vdso_data), hence the need for changing the size of above mentioned parameters. Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Cc: Douglas Leung <douglas.leung@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Petar Jovanovic <petar.jovanovic@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16638/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-28 22:55:28 +07:00
u64 to_mono_sec;
u64 to_mono_nsec;
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 15:57:44 +07:00
do {
start_seq = vdso_data_read_begin(data);
ts->tv_sec = data->xtime_sec;
ts->tv_nsec = data->xtime_nsec >> data->cs_shift;
to_mono_sec = data->wall_to_mono_sec;
to_mono_nsec = data->wall_to_mono_nsec;
} while (vdso_data_read_retry(data, start_seq));
ts->tv_sec += to_mono_sec;
timespec_add_ns(ts, to_mono_nsec);
return 0;
}
#ifdef CONFIG_CSRC_R4K
static __always_inline u64 read_r4k_count(void)
{
unsigned int count;
__asm__ __volatile__(
" .set push\n"
" .set mips32r2\n"
" rdhwr %0, $2\n"
" .set pop\n"
: "=r" (count));
return count;
}
#endif
#ifdef CONFIG_CLKSRC_MIPS_GIC
static __always_inline u64 read_gic_count(const union mips_vdso_data *data)
{
void __iomem *gic = get_gic(data);
u32 hi, hi2, lo;
do {
hi = __raw_readl(gic + sizeof(lo));
lo = __raw_readl(gic);
hi2 = __raw_readl(gic + sizeof(lo));
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 15:57:44 +07:00
} while (hi2 != hi);
return (((u64)hi) << 32) + lo;
}
#endif
static __always_inline u64 get_ns(const union mips_vdso_data *data)
{
u64 cycle_now, delta, nsec;
switch (data->clock_mode) {
#ifdef CONFIG_CSRC_R4K
case VDSO_CLOCK_R4K:
cycle_now = read_r4k_count();
break;
#endif
#ifdef CONFIG_CLKSRC_MIPS_GIC
case VDSO_CLOCK_GIC:
cycle_now = read_gic_count(data);
break;
#endif
default:
return 0;
}
delta = (cycle_now - data->cs_cycle_last) & data->cs_mask;
nsec = (delta * data->cs_mult) + data->xtime_nsec;
nsec >>= data->cs_shift;
return nsec;
}
static __always_inline int do_realtime(struct timespec *ts,
const union mips_vdso_data *data)
{
u32 start_seq;
u64 ns;
do {
start_seq = vdso_data_read_begin(data);
if (data->clock_mode == VDSO_CLOCK_NONE)
return -ENOSYS;
ts->tv_sec = data->xtime_sec;
ns = get_ns(data);
} while (vdso_data_read_retry(data, start_seq));
ts->tv_nsec = 0;
timespec_add_ns(ts, ns);
return 0;
}
static __always_inline int do_monotonic(struct timespec *ts,
const union mips_vdso_data *data)
{
u32 start_seq;
u64 ns;
MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() Fix incorrect calculation in do_monotonic() and do_monotonic_coarse() function that in turn caused incorrect values returned by the vdso version of system call clock_gettime() on mips64 if its system clock ID parameter was CLOCK_MONOTONIC or CLOCK_MONOTONIC_COARSE. Consider these variables and their types on mips32 and mips64: tk->wall_to_monotonic.tv_sec s64, s64 (kernel/vdso.c) vdso_data.wall_to_mono_sec u32, u32 (kernel/vdso.c) to_mono_sec u32, u32 (vdso/gettimeofday.c) ts->tv_sec s32, s64 (vdso/gettimeofday.c) For mips64 case, u32 vdso_data.wall_to_mono_sec variable is updated from the 64-bit signed variable tk->wall_to_monotonic.tv_sec (kernel/vdso.c:76) which is a negative number holding the time passed from 1970-01-01 to the time boot started. This 64-bit signed value is currently around 47+ years, in seconds. For instance, let this value be: -1489757461 or 11111111111111111111111111111111 10100111001101000001101011101011 By updating 32-bit vdso_data.wall_to_mono_sec variable, we lose upper 32 bits (signed 1's). to_mono_sec variable is a parameter of do_monotonic() and do_monotonic_coarse() functions which holds vdso_data.wall_to_mono_sec value. Its value needs to be added (or subtracted considering it holds negative value from the tk->wall_to_monotonic.tv_sec) to the current time passed from 1970-01-01 (ts->tv_sec), which is again something like 47+ years, but increased by the time passed from the boot to the current time. ts->tv_sec is 32-bit long in case of 32-bit architecture and 64-bit long in case of 64-bit architecture. Consider the update of ts->tv_sec (vdso/gettimeofday.c:55 & 167): ts->tv_sec += to_mono_sec; mips32 case: This update will be performed correctly, since both ts->tv_sec and to_mono_sec are 32-bit long and the sign in to_mono_sec is preserved. Implicit conversion from u32 to s32 will be done correctly. mips64 case: This update will be wrong, since the implicit conversion will not be done correctly. The reason is that the conversion will be from u32 to s64. This is because to_mono_sec is 32-bit long for both mips32 and mips64 cases and s64..33 bits of converted to_mono_sec variable will be zeros. So, in order to make MIPS64 implementation work properly for MONOTONIC and MONOTONIC_COARSE clock ids on mips64, the size of wall_to_mono_sec variable in mips_vdso_data union and respective parameters in do_monotonic() and do_monotonic_coarse() functions should be changed from u32 to u64. Because of consistency, this size change from u32 and u64 is also done for wall_to_mono_nsec variable and corresponding function parameters. As far as similar situations for other architectures are concerned, let's take a look at arm. Arm has two distinct vdso_data structures for 32-bit & 64-bit cases, and arm's wall_to_mono_sec and wall_to_mono_nsec are u32 for 32-bit and u64 for 64-bit cases. On the other hand, MIPS has only one structure (mips_vdso_data), hence the need for changing the size of above mentioned parameters. Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Cc: Douglas Leung <douglas.leung@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Petar Jovanovic <petar.jovanovic@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16638/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-28 22:55:28 +07:00
u64 to_mono_sec;
u64 to_mono_nsec;
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 15:57:44 +07:00
do {
start_seq = vdso_data_read_begin(data);
if (data->clock_mode == VDSO_CLOCK_NONE)
return -ENOSYS;
ts->tv_sec = data->xtime_sec;
ns = get_ns(data);
to_mono_sec = data->wall_to_mono_sec;
to_mono_nsec = data->wall_to_mono_nsec;
} while (vdso_data_read_retry(data, start_seq));
ts->tv_sec += to_mono_sec;
ts->tv_nsec = 0;
timespec_add_ns(ts, ns + to_mono_nsec);
return 0;
}
#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
/*
* This is behind the ifdef so that we don't provide the symbol when there's no
* possibility of there being a usable clocksource, because there's nothing we
* can do without it. When libc fails the symbol lookup it should fall back on
* the standard syscall path.
*/
int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
{
const union mips_vdso_data *data = get_vdso_data();
struct timespec ts;
int ret;
ret = do_realtime(&ts, data);
if (ret)
return gettimeofday_fallback(tv, tz);
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 15:57:44 +07:00
if (tv) {
tv->tv_sec = ts.tv_sec;
tv->tv_usec = ts.tv_nsec / 1000;
}
if (tz) {
tz->tz_minuteswest = data->tz_minuteswest;
tz->tz_dsttime = data->tz_dsttime;
}
return 0;
}
#endif /* CONFIG_MIPS_CLOCK_VSYSCALL */
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 15:57:44 +07:00
int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts)
{
const union mips_vdso_data *data = get_vdso_data();
int ret = -1;
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 15:57:44 +07:00
switch (clkid) {
case CLOCK_REALTIME_COARSE:
ret = do_realtime_coarse(ts, data);
break;
case CLOCK_MONOTONIC_COARSE:
ret = do_monotonic_coarse(ts, data);
break;
case CLOCK_REALTIME:
ret = do_realtime(ts, data);
break;
case CLOCK_MONOTONIC:
ret = do_monotonic(ts, data);
break;
default:
break;
}
if (ret)
ret = clock_gettime_fallback(clkid, ts);
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 15:57:44 +07:00
return ret;
}