linux_dsm_epyc7002/drivers/firmware/efi/efi-bgrt.c

92 lines
2.2 KiB
C
Raw Normal View History

/*
* Copyright 2012 Intel Corporation
* Author: Josh Triplett <josh@joshtriplett.org>
*
* Based on the bgrt driver:
* Copyright 2012 Red Hat, Inc <mjg@redhat.com>
* Author: Matthew Garrett
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/efi.h>
#include <linux/efi-bgrt.h>
struct acpi_table_bgrt bgrt_tab;
size_t __initdata bgrt_image_size;
struct bmp_header {
u16 id;
u32 size;
} __packed;
void __init efi_bgrt_init(struct acpi_table_header *table)
{
x86/efi-bgrt: Fix kernel panic when mapping BGRT data Starting with this commit 35eb8b81edd4 ("x86/efi: Build our own page table structures") efi regions have a separate page directory called "efi_pgd". In order to access any efi region we have to first shift %cr3 to this page table. In the bgrt code we are trying to copy bgrt_header and image, but these regions fall under "EFI_BOOT_SERVICES_DATA" and to access these regions we have to shift %cr3 to efi_pgd and not doing so will cause page fault as shown below. [ 0.251599] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.259126] Freeing SMP alternatives memory: 32K (ffffffff8230e000 - ffffffff82316000) [ 0.271803] BUG: unable to handle kernel paging request at fffffffefce35002 [ 0.279740] IP: [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.286383] PGD 300f067 PUD 0 [ 0.289879] Oops: 0000 [#1] SMP [ 0.293566] Modules linked in: [ 0.297039] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc1-eywa-eywa-built-in-47041+ #2 [ 0.306619] Hardware name: Intel Corporation Skylake Client platform/Skylake Y LPDDR3 RVP3, BIOS SKLSE2R1.R00.B104.B01.1511110114 11/11/2015 [ 0.320925] task: ffffffff820134c0 ti: ffffffff82000000 task.ti: ffffffff82000000 [ 0.329420] RIP: 0010:[<ffffffff821bca49>] [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.338821] RSP: 0000:ffffffff82003f18 EFLAGS: 00010246 [ 0.344852] RAX: fffffffefce35000 RBX: fffffffefce35000 RCX: fffffffefce2b000 [ 0.352952] RDX: 000000008a82b000 RSI: ffffffff8235bb80 RDI: 000000008a835000 [ 0.361050] RBP: ffffffff82003f30 R08: 000000008a865000 R09: ffffffffff202850 [ 0.369149] R10: ffffffff811ad62f R11: 0000000000000000 R12: 0000000000000000 [ 0.377248] R13: ffff88016dbaea40 R14: ffffffff822622c0 R15: ffffffff82003fb0 [ 0.385348] FS: 0000000000000000(0000) GS:ffff88016d800000(0000) knlGS:0000000000000000 [ 0.394533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.401054] CR2: fffffffefce35002 CR3: 000000000300c000 CR4: 00000000003406f0 [ 0.409153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.417252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.425350] Stack: [ 0.427638] ffffffffffffffff ffffffff82256900 ffff88016dbaea40 ffffffff82003f40 [ 0.436086] ffffffff821bbce0 ffffffff82003f88 ffffffff8219c0c2 0000000000000000 [ 0.444533] ffffffff8219ba4a ffffffff822622c0 0000000000083000 00000000ffffffff [ 0.452978] Call Trace: [ 0.455763] [<ffffffff821bbce0>] efi_late_init+0x9/0xb [ 0.461697] [<ffffffff8219c0c2>] start_kernel+0x463/0x47f [ 0.467928] [<ffffffff8219ba4a>] ? set_init_arg+0x55/0x55 [ 0.474159] [<ffffffff8219b120>] ? early_idt_handler_array+0x120/0x120 [ 0.481669] [<ffffffff8219b5ee>] x86_64_start_reservations+0x2a/0x2c [ 0.488982] [<ffffffff8219b72d>] x86_64_start_kernel+0x13d/0x14c [ 0.495897] Code: 00 41 b4 01 48 8b 78 28 e8 09 36 01 00 48 85 c0 48 89 c3 75 13 48 c7 c7 f8 ac d3 81 31 c0 e8 d7 3b fb fe e9 b5 00 00 00 45 84 e4 <44> 8b 6b 02 74 0d be 06 00 00 00 48 89 df e8 ae 34 0$ [ 0.518151] RIP [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.524888] RSP <ffffffff82003f18> [ 0.528851] CR2: fffffffefce35002 [ 0.532615] ---[ end trace 7b06521e6ebf2aea ]--- [ 0.537852] Kernel panic - not syncing: Attempted to kill the idle task! As said above one way to fix this bug is to shift %cr3 to efi_pgd but we are not doing that way because it leaks inner details of how we switch to EFI page tables into a new call site and it also adds duplicate code. Instead, we remove the call to efi_lookup_mapped_addr() and always perform early_mem*() instead of early_io*() because we want to remap RAM regions and not I/O regions. We also delete efi_lookup_mapped_addr() because we are no longer using it. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Ricardo Neri <ricardo.neri@intel.com> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2015-12-10 06:41:08 +07:00
void *image;
struct bmp_header bmp_header;
struct acpi_table_bgrt *bgrt = &bgrt_tab;
if (acpi_disabled)
return;
efi: Fix boot panic because of invalid BGRT image address Maniaxx reported a kernel boot crash in the EFI code, which I emulated by using same invalid phys addr in code: BUG: unable to handle kernel paging request at ffffffffff280001 IP: efi_bgrt_init+0xfb/0x153 ... Call Trace: ? bgrt_init+0xbc/0xbc acpi_parse_bgrt+0xe/0x12 acpi_table_parse+0x89/0xb8 acpi_boot_init+0x445/0x4e2 ? acpi_parse_x2apic+0x79/0x79 ? dmi_ignore_irq0_timer_override+0x33/0x33 setup_arch+0xb63/0xc82 ? early_idt_handler_array+0x120/0x120 start_kernel+0xb7/0x443 ? early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x154/0x177 secondary_startup_64+0x9f/0x9f There is also a similar bug filed in bugzilla.kernel.org: https://bugzilla.kernel.org/show_bug.cgi?id=195633 The crash is caused by this commit: 7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code The root cause is the firmware on those machines provides invalid BGRT image addresses. In a kernel before above commit BGRT initializes late and uses ioremap() to map the image address. Ioremap validates the address, if it is not a valid physical address ioremap() just fails and returns. However in current kernel EFI BGRT initializes early and uses early_memremap() which does not validate the image address, and kernel panic happens. According to ACPI spec the BGRT image address should fall into EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf Fix this issue by validating the image address in efi_bgrt_init(). If the image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just bail out with a warning message. Reported-by: Maniaxx <tripleshiftone@gmail.com> Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-09 15:45:58 +07:00
if (!efi_enabled(EFI_MEMMAP))
return;
if (table->length < sizeof(bgrt_tab)) {
2016-05-04 02:29:41 +07:00
pr_notice("Ignoring BGRT: invalid length %u (expected %zu)\n",
table->length, sizeof(bgrt_tab));
return;
}
*bgrt = *(struct acpi_table_bgrt *)table;
if (bgrt->version != 1) {
2016-05-04 02:29:41 +07:00
pr_notice("Ignoring BGRT: invalid version %u (expected 1)\n",
bgrt->version);
goto out;
}
if (bgrt->status & 0xfe) {
2016-05-04 02:29:41 +07:00
pr_notice("Ignoring BGRT: reserved status bits are non-zero %u\n",
bgrt->status);
goto out;
}
if (bgrt->image_type != 0) {
2016-05-04 02:29:41 +07:00
pr_notice("Ignoring BGRT: invalid image type %u (expected 0)\n",
bgrt->image_type);
goto out;
}
if (!bgrt->image_address) {
2016-05-04 02:29:41 +07:00
pr_notice("Ignoring BGRT: null image address\n");
goto out;
}
if (efi_mem_type(bgrt->image_address) != EFI_BOOT_SERVICES_DATA) {
efi: Fix boot panic because of invalid BGRT image address Maniaxx reported a kernel boot crash in the EFI code, which I emulated by using same invalid phys addr in code: BUG: unable to handle kernel paging request at ffffffffff280001 IP: efi_bgrt_init+0xfb/0x153 ... Call Trace: ? bgrt_init+0xbc/0xbc acpi_parse_bgrt+0xe/0x12 acpi_table_parse+0x89/0xb8 acpi_boot_init+0x445/0x4e2 ? acpi_parse_x2apic+0x79/0x79 ? dmi_ignore_irq0_timer_override+0x33/0x33 setup_arch+0xb63/0xc82 ? early_idt_handler_array+0x120/0x120 start_kernel+0xb7/0x443 ? early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x154/0x177 secondary_startup_64+0x9f/0x9f There is also a similar bug filed in bugzilla.kernel.org: https://bugzilla.kernel.org/show_bug.cgi?id=195633 The crash is caused by this commit: 7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code The root cause is the firmware on those machines provides invalid BGRT image addresses. In a kernel before above commit BGRT initializes late and uses ioremap() to map the image address. Ioremap validates the address, if it is not a valid physical address ioremap() just fails and returns. However in current kernel EFI BGRT initializes early and uses early_memremap() which does not validate the image address, and kernel panic happens. According to ACPI spec the BGRT image address should fall into EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf Fix this issue by validating the image address in efi_bgrt_init(). If the image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just bail out with a warning message. Reported-by: Maniaxx <tripleshiftone@gmail.com> Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-09 15:45:58 +07:00
pr_notice("Ignoring BGRT: invalid image address\n");
goto out;
}
image = early_memremap(bgrt->image_address, sizeof(bmp_header));
if (!image) {
2016-05-04 02:29:41 +07:00
pr_notice("Ignoring BGRT: failed to map image header memory\n");
goto out;
}
x86/efi-bgrt: Fix kernel panic when mapping BGRT data Starting with this commit 35eb8b81edd4 ("x86/efi: Build our own page table structures") efi regions have a separate page directory called "efi_pgd". In order to access any efi region we have to first shift %cr3 to this page table. In the bgrt code we are trying to copy bgrt_header and image, but these regions fall under "EFI_BOOT_SERVICES_DATA" and to access these regions we have to shift %cr3 to efi_pgd and not doing so will cause page fault as shown below. [ 0.251599] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.259126] Freeing SMP alternatives memory: 32K (ffffffff8230e000 - ffffffff82316000) [ 0.271803] BUG: unable to handle kernel paging request at fffffffefce35002 [ 0.279740] IP: [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.286383] PGD 300f067 PUD 0 [ 0.289879] Oops: 0000 [#1] SMP [ 0.293566] Modules linked in: [ 0.297039] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc1-eywa-eywa-built-in-47041+ #2 [ 0.306619] Hardware name: Intel Corporation Skylake Client platform/Skylake Y LPDDR3 RVP3, BIOS SKLSE2R1.R00.B104.B01.1511110114 11/11/2015 [ 0.320925] task: ffffffff820134c0 ti: ffffffff82000000 task.ti: ffffffff82000000 [ 0.329420] RIP: 0010:[<ffffffff821bca49>] [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.338821] RSP: 0000:ffffffff82003f18 EFLAGS: 00010246 [ 0.344852] RAX: fffffffefce35000 RBX: fffffffefce35000 RCX: fffffffefce2b000 [ 0.352952] RDX: 000000008a82b000 RSI: ffffffff8235bb80 RDI: 000000008a835000 [ 0.361050] RBP: ffffffff82003f30 R08: 000000008a865000 R09: ffffffffff202850 [ 0.369149] R10: ffffffff811ad62f R11: 0000000000000000 R12: 0000000000000000 [ 0.377248] R13: ffff88016dbaea40 R14: ffffffff822622c0 R15: ffffffff82003fb0 [ 0.385348] FS: 0000000000000000(0000) GS:ffff88016d800000(0000) knlGS:0000000000000000 [ 0.394533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.401054] CR2: fffffffefce35002 CR3: 000000000300c000 CR4: 00000000003406f0 [ 0.409153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.417252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.425350] Stack: [ 0.427638] ffffffffffffffff ffffffff82256900 ffff88016dbaea40 ffffffff82003f40 [ 0.436086] ffffffff821bbce0 ffffffff82003f88 ffffffff8219c0c2 0000000000000000 [ 0.444533] ffffffff8219ba4a ffffffff822622c0 0000000000083000 00000000ffffffff [ 0.452978] Call Trace: [ 0.455763] [<ffffffff821bbce0>] efi_late_init+0x9/0xb [ 0.461697] [<ffffffff8219c0c2>] start_kernel+0x463/0x47f [ 0.467928] [<ffffffff8219ba4a>] ? set_init_arg+0x55/0x55 [ 0.474159] [<ffffffff8219b120>] ? early_idt_handler_array+0x120/0x120 [ 0.481669] [<ffffffff8219b5ee>] x86_64_start_reservations+0x2a/0x2c [ 0.488982] [<ffffffff8219b72d>] x86_64_start_kernel+0x13d/0x14c [ 0.495897] Code: 00 41 b4 01 48 8b 78 28 e8 09 36 01 00 48 85 c0 48 89 c3 75 13 48 c7 c7 f8 ac d3 81 31 c0 e8 d7 3b fb fe e9 b5 00 00 00 45 84 e4 <44> 8b 6b 02 74 0d be 06 00 00 00 48 89 df e8 ae 34 0$ [ 0.518151] RIP [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.524888] RSP <ffffffff82003f18> [ 0.528851] CR2: fffffffefce35002 [ 0.532615] ---[ end trace 7b06521e6ebf2aea ]--- [ 0.537852] Kernel panic - not syncing: Attempted to kill the idle task! As said above one way to fix this bug is to shift %cr3 to efi_pgd but we are not doing that way because it leaks inner details of how we switch to EFI page tables into a new call site and it also adds duplicate code. Instead, we remove the call to efi_lookup_mapped_addr() and always perform early_mem*() instead of early_io*() because we want to remap RAM regions and not I/O regions. We also delete efi_lookup_mapped_addr() because we are no longer using it. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Ricardo Neri <ricardo.neri@intel.com> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2015-12-10 06:41:08 +07:00
memcpy(&bmp_header, image, sizeof(bmp_header));
early_memunmap(image, sizeof(bmp_header));
if (bmp_header.id != 0x4d42) {
2016-05-04 02:29:41 +07:00
pr_notice("Ignoring BGRT: Incorrect BMP magic number 0x%x (expected 0x4d42)\n",
bmp_header.id);
goto out;
}
bgrt_image_size = bmp_header.size;
efi_mem_reserve(bgrt->image_address, bgrt_image_size);
return;
out:
memset(bgrt, 0, sizeof(bgrt_tab));
}