linux_dsm_epyc7002/virt/kvm/eventfd.c

963 lines
22 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* kvm eventfd support - use eventfd objects to signal various KVM events
*
* Copyright 2009 Novell. All Rights Reserved.
* Copyright 2010 Red Hat, Inc. and/or its affiliates.
*
* Author:
* Gregory Haskins <ghaskins@novell.com>
*/
#include <linux/kvm_host.h>
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
#include <linux/kvm.h>
#include <linux/kvm_irqfd.h>
#include <linux/workqueue.h>
#include <linux/syscalls.h>
#include <linux/wait.h>
#include <linux/poll.h>
#include <linux/file.h>
#include <linux/list.h>
#include <linux/eventfd.h>
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
#include <linux/kernel.h>
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
#include <linux/srcu.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/seqlock.h>
#include <linux/irqbypass.h>
#include <trace/events/kvm.h>
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
#include <kvm/iodev.h>
#ifdef CONFIG_HAVE_KVM_IRQFD
static struct workqueue_struct *irqfd_cleanup_wq;
bool __attribute__((weak))
kvm_arch_irqfd_allowed(struct kvm *kvm, struct kvm_irqfd *args)
{
return true;
}
static void
irqfd_inject(struct work_struct *work)
{
struct kvm_kernel_irqfd *irqfd =
container_of(work, struct kvm_kernel_irqfd, inject);
struct kvm *kvm = irqfd->kvm;
if (!irqfd->resampler) {
kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID, irqfd->gsi, 1,
false);
kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID, irqfd->gsi, 0,
false);
} else
kvm_set_irq(kvm, KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID,
irqfd->gsi, 1, false);
}
/*
* Since resampler irqfds share an IRQ source ID, we de-assert once
* then notify all of the resampler irqfds using this GSI. We can't
* do multiple de-asserts or we risk racing with incoming re-asserts.
*/
static void
irqfd_resampler_ack(struct kvm_irq_ack_notifier *kian)
{
struct kvm_kernel_irqfd_resampler *resampler;
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
struct kvm *kvm;
struct kvm_kernel_irqfd *irqfd;
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
int idx;
resampler = container_of(kian,
struct kvm_kernel_irqfd_resampler, notifier);
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
kvm = resampler->kvm;
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
kvm_set_irq(kvm, KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID,
resampler->notifier.gsi, 0, false);
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
idx = srcu_read_lock(&kvm->irq_srcu);
list_for_each_entry_rcu(irqfd, &resampler->list, resampler_link)
eventfd_signal(irqfd->resamplefd, 1);
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
srcu_read_unlock(&kvm->irq_srcu, idx);
}
static void
irqfd_resampler_shutdown(struct kvm_kernel_irqfd *irqfd)
{
struct kvm_kernel_irqfd_resampler *resampler = irqfd->resampler;
struct kvm *kvm = resampler->kvm;
mutex_lock(&kvm->irqfds.resampler_lock);
list_del_rcu(&irqfd->resampler_link);
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
synchronize_srcu(&kvm->irq_srcu);
if (list_empty(&resampler->list)) {
list_del(&resampler->link);
kvm_unregister_irq_ack_notifier(kvm, &resampler->notifier);
kvm_set_irq(kvm, KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID,
resampler->notifier.gsi, 0, false);
kfree(resampler);
}
mutex_unlock(&kvm->irqfds.resampler_lock);
}
/*
* Race-free decouple logic (ordering is critical)
*/
static void
irqfd_shutdown(struct work_struct *work)
{
struct kvm_kernel_irqfd *irqfd =
container_of(work, struct kvm_kernel_irqfd, shutdown);
struct kvm *kvm = irqfd->kvm;
u64 cnt;
/* Make sure irqfd has been initalized in assign path. */
synchronize_srcu(&kvm->irq_srcu);
/*
* Synchronize with the wait-queue and unhook ourselves to prevent
* further events.
*/
eventfd_ctx_remove_wait_queue(irqfd->eventfd, &irqfd->wait, &cnt);
/*
* We know no new events will be scheduled at this point, so block
* until all previously outstanding events have completed
*/
workqueue: deprecate flush[_delayed]_work_sync() flush[_delayed]_work_sync() are now spurious. Mark them deprecated and convert all users to flush[_delayed]_work(). If you're cc'd and wondering what's going on: Now all workqueues are non-reentrant and the regular flushes guarantee that the work item is not pending or running on any CPU on return, so there's no reason to use the sync flushes at all and they're going away. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mattia Dongili <malattia@linux.it> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Avi Kivity <avi@redhat.com>
2012-08-21 04:51:24 +07:00
flush_work(&irqfd->inject);
if (irqfd->resampler) {
irqfd_resampler_shutdown(irqfd);
eventfd_ctx_put(irqfd->resamplefd);
}
/*
* It is now safe to release the object's resources
*/
#ifdef CONFIG_HAVE_KVM_IRQ_BYPASS
irq_bypass_unregister_consumer(&irqfd->consumer);
#endif
eventfd_ctx_put(irqfd->eventfd);
kfree(irqfd);
}
/* assumes kvm->irqfds.lock is held */
static bool
irqfd_is_active(struct kvm_kernel_irqfd *irqfd)
{
return list_empty(&irqfd->list) ? false : true;
}
/*
* Mark the irqfd as inactive and schedule it for removal
*
* assumes kvm->irqfds.lock is held
*/
static void
irqfd_deactivate(struct kvm_kernel_irqfd *irqfd)
{
BUG_ON(!irqfd_is_active(irqfd));
list_del_init(&irqfd->list);
queue_work(irqfd_cleanup_wq, &irqfd->shutdown);
}
int __attribute__((weak)) kvm_arch_set_irq_inatomic(
struct kvm_kernel_irq_routing_entry *irq,
struct kvm *kvm, int irq_source_id,
int level,
bool line_status)
{
return -EWOULDBLOCK;
}
/*
* Called with wqh->lock held and interrupts disabled
*/
static int
irqfd_wakeup(wait_queue_entry_t *wait, unsigned mode, int sync, void *key)
{
struct kvm_kernel_irqfd *irqfd =
container_of(wait, struct kvm_kernel_irqfd, wait);
__poll_t flags = key_to_poll(key);
struct kvm_kernel_irq_routing_entry irq;
struct kvm *kvm = irqfd->kvm;
unsigned seq;
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
int idx;
if (flags & EPOLLIN) {
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
idx = srcu_read_lock(&kvm->irq_srcu);
do {
seq = read_seqcount_begin(&irqfd->irq_entry_sc);
irq = irqfd->irq_entry;
} while (read_seqcount_retry(&irqfd->irq_entry_sc, seq));
/* An event has been signaled, inject an interrupt */
if (kvm_arch_set_irq_inatomic(&irq, kvm,
KVM_USERSPACE_IRQ_SOURCE_ID, 1,
false) == -EWOULDBLOCK)
schedule_work(&irqfd->inject);
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
srcu_read_unlock(&kvm->irq_srcu, idx);
}
if (flags & EPOLLHUP) {
/* The eventfd is closing, detach from KVM */
unsigned long iflags;
spin_lock_irqsave(&kvm->irqfds.lock, iflags);
/*
* We must check if someone deactivated the irqfd before
* we could acquire the irqfds.lock since the item is
* deactivated from the KVM side before it is unhooked from
* the wait-queue. If it is already deactivated, we can
* simply return knowing the other side will cleanup for us.
* We cannot race against the irqfd going away since the
* other side is required to acquire wqh->lock, which we hold
*/
if (irqfd_is_active(irqfd))
irqfd_deactivate(irqfd);
spin_unlock_irqrestore(&kvm->irqfds.lock, iflags);
}
return 0;
}
static void
irqfd_ptable_queue_proc(struct file *file, wait_queue_head_t *wqh,
poll_table *pt)
{
struct kvm_kernel_irqfd *irqfd =
container_of(pt, struct kvm_kernel_irqfd, pt);
add_wait_queue(wqh, &irqfd->wait);
}
/* Must be called under irqfds.lock */
static void irqfd_update(struct kvm *kvm, struct kvm_kernel_irqfd *irqfd)
{
struct kvm_kernel_irq_routing_entry *e;
struct kvm_kernel_irq_routing_entry entries[KVM_NR_IRQCHIPS];
int n_entries;
n_entries = kvm_irq_map_gsi(kvm, entries, irqfd->gsi);
write_seqcount_begin(&irqfd->irq_entry_sc);
e = entries;
if (n_entries == 1)
irqfd->irq_entry = *e;
else
irqfd->irq_entry.type = 0;
write_seqcount_end(&irqfd->irq_entry_sc);
}
#ifdef CONFIG_HAVE_KVM_IRQ_BYPASS
void __attribute__((weak)) kvm_arch_irq_bypass_stop(
struct irq_bypass_consumer *cons)
{
}
void __attribute__((weak)) kvm_arch_irq_bypass_start(
struct irq_bypass_consumer *cons)
{
}
int __attribute__((weak)) kvm_arch_update_irqfd_routing(
struct kvm *kvm, unsigned int host_irq,
uint32_t guest_irq, bool set)
{
return 0;
}
#endif
static int
kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct kvm_kernel_irqfd *irqfd, *tmp;
struct fd f;
struct eventfd_ctx *eventfd = NULL, *resamplefd = NULL;
int ret;
__poll_t events;
int idx;
if (!kvm_arch_intc_initialized(kvm))
return -EAGAIN;
if (!kvm_arch_irqfd_allowed(kvm, args))
return -EINVAL;
irqfd = kzalloc(sizeof(*irqfd), GFP_KERNEL_ACCOUNT);
if (!irqfd)
return -ENOMEM;
irqfd->kvm = kvm;
irqfd->gsi = args->gsi;
INIT_LIST_HEAD(&irqfd->list);
INIT_WORK(&irqfd->inject, irqfd_inject);
INIT_WORK(&irqfd->shutdown, irqfd_shutdown);
seqcount_init(&irqfd->irq_entry_sc);
f = fdget(args->fd);
if (!f.file) {
ret = -EBADF;
goto out;
}
eventfd = eventfd_ctx_fileget(f.file);
if (IS_ERR(eventfd)) {
ret = PTR_ERR(eventfd);
goto fail;
}
irqfd->eventfd = eventfd;
if (args->flags & KVM_IRQFD_FLAG_RESAMPLE) {
struct kvm_kernel_irqfd_resampler *resampler;
resamplefd = eventfd_ctx_fdget(args->resamplefd);
if (IS_ERR(resamplefd)) {
ret = PTR_ERR(resamplefd);
goto fail;
}
irqfd->resamplefd = resamplefd;
INIT_LIST_HEAD(&irqfd->resampler_link);
mutex_lock(&kvm->irqfds.resampler_lock);
list_for_each_entry(resampler,
&kvm->irqfds.resampler_list, link) {
if (resampler->notifier.gsi == irqfd->gsi) {
irqfd->resampler = resampler;
break;
}
}
if (!irqfd->resampler) {
resampler = kzalloc(sizeof(*resampler),
GFP_KERNEL_ACCOUNT);
if (!resampler) {
ret = -ENOMEM;
mutex_unlock(&kvm->irqfds.resampler_lock);
goto fail;
}
resampler->kvm = kvm;
INIT_LIST_HEAD(&resampler->list);
resampler->notifier.gsi = irqfd->gsi;
resampler->notifier.irq_acked = irqfd_resampler_ack;
INIT_LIST_HEAD(&resampler->link);
list_add(&resampler->link, &kvm->irqfds.resampler_list);
kvm_register_irq_ack_notifier(kvm,
&resampler->notifier);
irqfd->resampler = resampler;
}
list_add_rcu(&irqfd->resampler_link, &irqfd->resampler->list);
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
synchronize_srcu(&kvm->irq_srcu);
mutex_unlock(&kvm->irqfds.resampler_lock);
}
/*
* Install our own custom wake-up handling so we are notified via
* a callback whenever someone signals the underlying eventfd
*/
init_waitqueue_func_entry(&irqfd->wait, irqfd_wakeup);
init_poll_funcptr(&irqfd->pt, irqfd_ptable_queue_proc);
spin_lock_irq(&kvm->irqfds.lock);
ret = 0;
list_for_each_entry(tmp, &kvm->irqfds.items, list) {
if (irqfd->eventfd != tmp->eventfd)
continue;
/* This fd is used for another irq already. */
ret = -EBUSY;
spin_unlock_irq(&kvm->irqfds.lock);
goto fail;
}
idx = srcu_read_lock(&kvm->irq_srcu);
irqfd_update(kvm, irqfd);
list_add_tail(&irqfd->list, &kvm->irqfds.items);
spin_unlock_irq(&kvm->irqfds.lock);
/*
* Check if there was an event already pending on the eventfd
* before we registered, and trigger it as if we didn't miss it.
*/
events = vfs_poll(f.file, &irqfd->pt);
if (events & EPOLLIN)
schedule_work(&irqfd->inject);
#ifdef CONFIG_HAVE_KVM_IRQ_BYPASS
if (kvm_arch_has_irq_bypass()) {
irqfd->consumer.token = (void *)irqfd->eventfd;
irqfd->consumer.add_producer = kvm_arch_irq_bypass_add_producer;
irqfd->consumer.del_producer = kvm_arch_irq_bypass_del_producer;
irqfd->consumer.stop = kvm_arch_irq_bypass_stop;
irqfd->consumer.start = kvm_arch_irq_bypass_start;
ret = irq_bypass_register_consumer(&irqfd->consumer);
if (ret)
pr_info("irq bypass consumer (token %p) registration fails: %d\n",
irqfd->consumer.token, ret);
}
#endif
srcu_read_unlock(&kvm->irq_srcu, idx);
/*
* do not drop the file until the irqfd is fully initialized, otherwise
* we might race against the EPOLLHUP
*/
fdput(f);
return 0;
fail:
if (irqfd->resampler)
irqfd_resampler_shutdown(irqfd);
if (resamplefd && !IS_ERR(resamplefd))
eventfd_ctx_put(resamplefd);
if (eventfd && !IS_ERR(eventfd))
eventfd_ctx_put(eventfd);
fdput(f);
out:
kfree(irqfd);
return ret;
}
bool kvm_irq_has_notifier(struct kvm *kvm, unsigned irqchip, unsigned pin)
{
struct kvm_irq_ack_notifier *kian;
int gsi, idx;
idx = srcu_read_lock(&kvm->irq_srcu);
gsi = kvm_irq_map_chip_pin(kvm, irqchip, pin);
if (gsi != -1)
hlist_for_each_entry_rcu(kian, &kvm->irq_ack_notifier_list,
link)
if (kian->gsi == gsi) {
srcu_read_unlock(&kvm->irq_srcu, idx);
return true;
}
srcu_read_unlock(&kvm->irq_srcu, idx);
return false;
}
EXPORT_SYMBOL_GPL(kvm_irq_has_notifier);
void kvm_notify_acked_gsi(struct kvm *kvm, int gsi)
{
struct kvm_irq_ack_notifier *kian;
hlist_for_each_entry_rcu(kian, &kvm->irq_ack_notifier_list,
link)
if (kian->gsi == gsi)
kian->irq_acked(kian);
}
void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin)
{
int gsi, idx;
trace_kvm_ack_irq(irqchip, pin);
idx = srcu_read_lock(&kvm->irq_srcu);
gsi = kvm_irq_map_chip_pin(kvm, irqchip, pin);
if (gsi != -1)
kvm_notify_acked_gsi(kvm, gsi);
srcu_read_unlock(&kvm->irq_srcu, idx);
}
void kvm_register_irq_ack_notifier(struct kvm *kvm,
struct kvm_irq_ack_notifier *kian)
{
mutex_lock(&kvm->irq_lock);
hlist_add_head_rcu(&kian->link, &kvm->irq_ack_notifier_list);
mutex_unlock(&kvm->irq_lock);
kvm_arch_post_irq_ack_notifier_list_update(kvm);
}
void kvm_unregister_irq_ack_notifier(struct kvm *kvm,
struct kvm_irq_ack_notifier *kian)
{
mutex_lock(&kvm->irq_lock);
hlist_del_init_rcu(&kian->link);
mutex_unlock(&kvm->irq_lock);
synchronize_srcu(&kvm->irq_srcu);
kvm_arch_post_irq_ack_notifier_list_update(kvm);
}
#endif
void
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
kvm_eventfd_init(struct kvm *kvm)
{
#ifdef CONFIG_HAVE_KVM_IRQFD
spin_lock_init(&kvm->irqfds.lock);
INIT_LIST_HEAD(&kvm->irqfds.items);
INIT_LIST_HEAD(&kvm->irqfds.resampler_list);
mutex_init(&kvm->irqfds.resampler_lock);
#endif
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
INIT_LIST_HEAD(&kvm->ioeventfds);
}
#ifdef CONFIG_HAVE_KVM_IRQFD
/*
* shutdown any irqfd's that match fd+gsi
*/
static int
kvm_irqfd_deassign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct kvm_kernel_irqfd *irqfd, *tmp;
struct eventfd_ctx *eventfd;
eventfd = eventfd_ctx_fdget(args->fd);
if (IS_ERR(eventfd))
return PTR_ERR(eventfd);
spin_lock_irq(&kvm->irqfds.lock);
list_for_each_entry_safe(irqfd, tmp, &kvm->irqfds.items, list) {
if (irqfd->eventfd == eventfd && irqfd->gsi == args->gsi) {
/*
* This clearing of irq_entry.type is needed for when
* another thread calls kvm_irq_routing_update before
* we flush workqueue below (we synchronize with
* kvm_irq_routing_update using irqfds.lock).
*/
write_seqcount_begin(&irqfd->irq_entry_sc);
irqfd->irq_entry.type = 0;
write_seqcount_end(&irqfd->irq_entry_sc);
irqfd_deactivate(irqfd);
}
}
spin_unlock_irq(&kvm->irqfds.lock);
eventfd_ctx_put(eventfd);
/*
* Block until we know all outstanding shutdown jobs have completed
* so that we guarantee there will not be any more interrupts on this
* gsi once this deassign function returns.
*/
flush_workqueue(irqfd_cleanup_wq);
return 0;
}
int
kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
{
if (args->flags & ~(KVM_IRQFD_FLAG_DEASSIGN | KVM_IRQFD_FLAG_RESAMPLE))
return -EINVAL;
if (args->flags & KVM_IRQFD_FLAG_DEASSIGN)
return kvm_irqfd_deassign(kvm, args);
return kvm_irqfd_assign(kvm, args);
}
/*
* This function is called as the kvm VM fd is being released. Shutdown all
* irqfds that still remain open
*/
void
kvm_irqfd_release(struct kvm *kvm)
{
struct kvm_kernel_irqfd *irqfd, *tmp;
spin_lock_irq(&kvm->irqfds.lock);
list_for_each_entry_safe(irqfd, tmp, &kvm->irqfds.items, list)
irqfd_deactivate(irqfd);
spin_unlock_irq(&kvm->irqfds.lock);
/*
* Block until we know all outstanding shutdown jobs have completed
* since we do not take a kvm* reference.
*/
flush_workqueue(irqfd_cleanup_wq);
}
/*
* Take note of a change in irq routing.
kvm/irqchip: Speed up KVM_SET_GSI_ROUTING When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-16 19:44:20 +07:00
* Caller must invoke synchronize_srcu(&kvm->irq_srcu) afterwards.
*/
void kvm_irq_routing_update(struct kvm *kvm)
{
struct kvm_kernel_irqfd *irqfd;
spin_lock_irq(&kvm->irqfds.lock);
list_for_each_entry(irqfd, &kvm->irqfds.items, list) {
irqfd_update(kvm, irqfd);
#ifdef CONFIG_HAVE_KVM_IRQ_BYPASS
if (irqfd->producer) {
int ret = kvm_arch_update_irqfd_routing(
irqfd->kvm, irqfd->producer->irq,
irqfd->gsi, 1);
WARN_ON(ret);
}
#endif
}
spin_unlock_irq(&kvm->irqfds.lock);
}
/*
* create a host-wide workqueue for issuing deferred shutdown requests
* aggregated from all vm* instances. We need our own isolated
* queue to ease flushing work items when a VM exits.
*/
int kvm_irqfd_init(void)
{
irqfd_cleanup_wq = alloc_workqueue("kvm-irqfd-cleanup", 0, 0);
if (!irqfd_cleanup_wq)
return -ENOMEM;
return 0;
}
void kvm_irqfd_exit(void)
{
destroy_workqueue(irqfd_cleanup_wq);
}
#endif
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
/*
* --------------------------------------------------------------------
* ioeventfd: translate a PIO/MMIO memory write to an eventfd signal.
*
* userspace can register a PIO/MMIO address with an eventfd for receiving
* notification when the memory has been touched.
* --------------------------------------------------------------------
*/
struct _ioeventfd {
struct list_head list;
u64 addr;
int length;
struct eventfd_ctx *eventfd;
u64 datamatch;
struct kvm_io_device dev;
u8 bus_idx;
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
bool wildcard;
};
static inline struct _ioeventfd *
to_ioeventfd(struct kvm_io_device *dev)
{
return container_of(dev, struct _ioeventfd, dev);
}
static void
ioeventfd_release(struct _ioeventfd *p)
{
eventfd_ctx_put(p->eventfd);
list_del(&p->list);
kfree(p);
}
static bool
ioeventfd_in_range(struct _ioeventfd *p, gpa_t addr, int len, const void *val)
{
u64 _val;
if (addr != p->addr)
/* address must be precise for a hit */
return false;
if (!p->length)
/* length = 0 means only look at the address, so always a hit */
return true;
if (len != p->length)
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
/* address-range must be precise for a hit */
return false;
if (p->wildcard)
/* all else equal, wildcard is always a hit */
return true;
/* otherwise, we have to actually compare the data */
BUG_ON(!IS_ALIGNED((unsigned long)val, len));
switch (len) {
case 1:
_val = *(u8 *)val;
break;
case 2:
_val = *(u16 *)val;
break;
case 4:
_val = *(u32 *)val;
break;
case 8:
_val = *(u64 *)val;
break;
default:
return false;
}
return _val == p->datamatch ? true : false;
}
/* MMIO/PIO writes trigger an event if the addr/val match */
static int
ioeventfd_write(struct kvm_vcpu *vcpu, struct kvm_io_device *this, gpa_t addr,
int len, const void *val)
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
{
struct _ioeventfd *p = to_ioeventfd(this);
if (!ioeventfd_in_range(p, addr, len, val))
return -EOPNOTSUPP;
eventfd_signal(p->eventfd, 1);
return 0;
}
/*
* This function is called as KVM is completely shutting down. We do not
* need to worry about locking just nuke anything we have as quickly as possible
*/
static void
ioeventfd_destructor(struct kvm_io_device *this)
{
struct _ioeventfd *p = to_ioeventfd(this);
ioeventfd_release(p);
}
static const struct kvm_io_device_ops ioeventfd_ops = {
.write = ioeventfd_write,
.destructor = ioeventfd_destructor,
};
/* assumes kvm->slots_lock held */
static bool
ioeventfd_check_collision(struct kvm *kvm, struct _ioeventfd *p)
{
struct _ioeventfd *_p;
list_for_each_entry(_p, &kvm->ioeventfds, list)
if (_p->bus_idx == p->bus_idx &&
_p->addr == p->addr &&
(!_p->length || !p->length ||
(_p->length == p->length &&
(_p->wildcard || p->wildcard ||
_p->datamatch == p->datamatch))))
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
return true;
return false;
}
static enum kvm_bus ioeventfd_bus_from_flags(__u32 flags)
{
if (flags & KVM_IOEVENTFD_FLAG_PIO)
return KVM_PIO_BUS;
if (flags & KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY)
return KVM_VIRTIO_CCW_NOTIFY_BUS;
return KVM_MMIO_BUS;
}
static int kvm_assign_ioeventfd_idx(struct kvm *kvm,
enum kvm_bus bus_idx,
struct kvm_ioeventfd *args)
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
{
struct eventfd_ctx *eventfd;
struct _ioeventfd *p;
int ret;
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
eventfd = eventfd_ctx_fdget(args->fd);
if (IS_ERR(eventfd))
return PTR_ERR(eventfd);
p = kzalloc(sizeof(*p), GFP_KERNEL_ACCOUNT);
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
if (!p) {
ret = -ENOMEM;
goto fail;
}
INIT_LIST_HEAD(&p->list);
p->addr = args->addr;
p->bus_idx = bus_idx;
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
p->length = args->len;
p->eventfd = eventfd;
/* The datamatch feature is optional, otherwise this is a wildcard */
if (args->flags & KVM_IOEVENTFD_FLAG_DATAMATCH)
p->datamatch = args->datamatch;
else
p->wildcard = true;
mutex_lock(&kvm->slots_lock);
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
/* Verify that there isn't a match already */
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
if (ioeventfd_check_collision(kvm, p)) {
ret = -EEXIST;
goto unlock_fail;
}
kvm_iodevice_init(&p->dev, &ioeventfd_ops);
ret = kvm_io_bus_register_dev(kvm, bus_idx, p->addr, p->length,
&p->dev);
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
if (ret < 0)
goto unlock_fail;
kvm_get_bus(kvm, bus_idx)->ioeventfd_count++;
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
list_add_tail(&p->list, &kvm->ioeventfds);
mutex_unlock(&kvm->slots_lock);
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
return 0;
unlock_fail:
mutex_unlock(&kvm->slots_lock);
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
fail:
kfree(p);
eventfd_ctx_put(eventfd);
return ret;
}
static int
kvm_deassign_ioeventfd_idx(struct kvm *kvm, enum kvm_bus bus_idx,
struct kvm_ioeventfd *args)
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
{
struct _ioeventfd *p, *tmp;
struct eventfd_ctx *eventfd;
struct kvm_io_bus *bus;
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
int ret = -ENOENT;
eventfd = eventfd_ctx_fdget(args->fd);
if (IS_ERR(eventfd))
return PTR_ERR(eventfd);
mutex_lock(&kvm->slots_lock);
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
list_for_each_entry_safe(p, tmp, &kvm->ioeventfds, list) {
bool wildcard = !(args->flags & KVM_IOEVENTFD_FLAG_DATAMATCH);
if (p->bus_idx != bus_idx ||
p->eventfd != eventfd ||
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
p->addr != args->addr ||
p->length != args->len ||
p->wildcard != wildcard)
continue;
if (!p->wildcard && p->datamatch != args->datamatch)
continue;
kvm_io_bus_unregister_dev(kvm, bus_idx, &p->dev);
bus = kvm_get_bus(kvm, bus_idx);
if (bus)
bus->ioeventfd_count--;
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
ioeventfd_release(p);
ret = 0;
break;
}
mutex_unlock(&kvm->slots_lock);
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
eventfd_ctx_put(eventfd);
return ret;
}
static int kvm_deassign_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
{
enum kvm_bus bus_idx = ioeventfd_bus_from_flags(args->flags);
kvm: fix double free for fast mmio eventfd We register wildcard mmio eventfd on two buses, once for KVM_MMIO_BUS and once on KVM_FAST_MMIO_BUS but with a single iodev instance. This will lead to an issue: kvm_io_bus_destroy() knows nothing about the devices on two buses pointing to a single dev. Which will lead to double free[1] during exit. Fix this by allocating two instances of iodevs then registering one on KVM_MMIO_BUS and another on KVM_FAST_MMIO_BUS. CPU: 1 PID: 2894 Comm: qemu-system-x86 Not tainted 3.19.0-26-generic #28-Ubuntu Hardware name: LENOVO 2356BG6/2356BG6, BIOS G7ET96WW (2.56 ) 09/12/2013 task: ffff88009ae0c4b0 ti: ffff88020e7f0000 task.ti: ffff88020e7f0000 RIP: 0010:[<ffffffffc07e25d8>] [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP: 0018:ffff88020e7f3bc8 EFLAGS: 00010292 RAX: dead000000200200 RBX: ffff8801ec19c900 RCX: 000000018200016d RDX: ffff8801ec19cf80 RSI: ffffea0008bf1d40 RDI: ffff8801ec19c900 RBP: ffff88020e7f3bd8 R08: 000000002fc75a01 R09: 000000018200016d R10: ffffffffc07df6ae R11: ffff88022fc75a98 R12: ffff88021e7cc000 R13: ffff88021e7cca48 R14: ffff88021e7cca50 R15: ffff8801ec19c880 FS: 00007fc1ee3e6700(0000) GS:ffff88023e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f389d8000 CR3: 000000023dc13000 CR4: 00000000001427e0 Stack: ffff88021e7cc000 0000000000000000 ffff88020e7f3be8 ffffffffc07e2622 ffff88020e7f3c38 ffffffffc07df69a ffff880232524160 ffff88020e792d80 0000000000000000 ffff880219b78c00 0000000000000008 ffff8802321686a8 Call Trace: [<ffffffffc07e2622>] ioeventfd_destructor+0x12/0x20 [kvm] [<ffffffffc07df69a>] kvm_put_kvm+0xca/0x210 [kvm] [<ffffffffc07df818>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff811f69f7>] __fput+0xe7/0x250 [<ffffffff811f6bae>] ____fput+0xe/0x10 [<ffffffff81093f04>] task_work_run+0xd4/0xf0 [<ffffffff81079358>] do_exit+0x368/0xa50 [<ffffffff81082c8f>] ? recalc_sigpending+0x1f/0x60 [<ffffffff81079ad5>] do_group_exit+0x45/0xb0 [<ffffffff81085c71>] get_signal+0x291/0x750 [<ffffffff810144d8>] do_signal+0x28/0xab0 [<ffffffff810f3a3b>] ? do_futex+0xdb/0x5d0 [<ffffffff810b7028>] ? __wake_up_locked_key+0x18/0x20 [<ffffffff810f3fa6>] ? SyS_futex+0x76/0x170 [<ffffffff81014fc9>] do_notify_resume+0x69/0xb0 [<ffffffff817cb9af>] int_signal+0x12/0x17 Code: 5d c3 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 8b 7f 20 e8 06 d6 a5 c0 48 8b 43 08 48 8b 13 48 89 df 48 89 42 08 <48> 89 10 48 b8 00 01 10 00 00 RIP [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP <ffff88020e7f3bc8> Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15 13:41:56 +07:00
int ret = kvm_deassign_ioeventfd_idx(kvm, bus_idx, args);
if (!args->len && bus_idx == KVM_MMIO_BUS)
kvm_deassign_ioeventfd_idx(kvm, KVM_FAST_MMIO_BUS, args);
kvm: fix double free for fast mmio eventfd We register wildcard mmio eventfd on two buses, once for KVM_MMIO_BUS and once on KVM_FAST_MMIO_BUS but with a single iodev instance. This will lead to an issue: kvm_io_bus_destroy() knows nothing about the devices on two buses pointing to a single dev. Which will lead to double free[1] during exit. Fix this by allocating two instances of iodevs then registering one on KVM_MMIO_BUS and another on KVM_FAST_MMIO_BUS. CPU: 1 PID: 2894 Comm: qemu-system-x86 Not tainted 3.19.0-26-generic #28-Ubuntu Hardware name: LENOVO 2356BG6/2356BG6, BIOS G7ET96WW (2.56 ) 09/12/2013 task: ffff88009ae0c4b0 ti: ffff88020e7f0000 task.ti: ffff88020e7f0000 RIP: 0010:[<ffffffffc07e25d8>] [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP: 0018:ffff88020e7f3bc8 EFLAGS: 00010292 RAX: dead000000200200 RBX: ffff8801ec19c900 RCX: 000000018200016d RDX: ffff8801ec19cf80 RSI: ffffea0008bf1d40 RDI: ffff8801ec19c900 RBP: ffff88020e7f3bd8 R08: 000000002fc75a01 R09: 000000018200016d R10: ffffffffc07df6ae R11: ffff88022fc75a98 R12: ffff88021e7cc000 R13: ffff88021e7cca48 R14: ffff88021e7cca50 R15: ffff8801ec19c880 FS: 00007fc1ee3e6700(0000) GS:ffff88023e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f389d8000 CR3: 000000023dc13000 CR4: 00000000001427e0 Stack: ffff88021e7cc000 0000000000000000 ffff88020e7f3be8 ffffffffc07e2622 ffff88020e7f3c38 ffffffffc07df69a ffff880232524160 ffff88020e792d80 0000000000000000 ffff880219b78c00 0000000000000008 ffff8802321686a8 Call Trace: [<ffffffffc07e2622>] ioeventfd_destructor+0x12/0x20 [kvm] [<ffffffffc07df69a>] kvm_put_kvm+0xca/0x210 [kvm] [<ffffffffc07df818>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff811f69f7>] __fput+0xe7/0x250 [<ffffffff811f6bae>] ____fput+0xe/0x10 [<ffffffff81093f04>] task_work_run+0xd4/0xf0 [<ffffffff81079358>] do_exit+0x368/0xa50 [<ffffffff81082c8f>] ? recalc_sigpending+0x1f/0x60 [<ffffffff81079ad5>] do_group_exit+0x45/0xb0 [<ffffffff81085c71>] get_signal+0x291/0x750 [<ffffffff810144d8>] do_signal+0x28/0xab0 [<ffffffff810f3a3b>] ? do_futex+0xdb/0x5d0 [<ffffffff810b7028>] ? __wake_up_locked_key+0x18/0x20 [<ffffffff810f3fa6>] ? SyS_futex+0x76/0x170 [<ffffffff81014fc9>] do_notify_resume+0x69/0xb0 [<ffffffff817cb9af>] int_signal+0x12/0x17 Code: 5d c3 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 8b 7f 20 e8 06 d6 a5 c0 48 8b 43 08 48 8b 13 48 89 df 48 89 42 08 <48> 89 10 48 b8 00 01 10 00 00 RIP [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP <ffff88020e7f3bc8> Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15 13:41:56 +07:00
return ret;
}
static int
kvm_assign_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
{
enum kvm_bus bus_idx;
kvm: fix double free for fast mmio eventfd We register wildcard mmio eventfd on two buses, once for KVM_MMIO_BUS and once on KVM_FAST_MMIO_BUS but with a single iodev instance. This will lead to an issue: kvm_io_bus_destroy() knows nothing about the devices on two buses pointing to a single dev. Which will lead to double free[1] during exit. Fix this by allocating two instances of iodevs then registering one on KVM_MMIO_BUS and another on KVM_FAST_MMIO_BUS. CPU: 1 PID: 2894 Comm: qemu-system-x86 Not tainted 3.19.0-26-generic #28-Ubuntu Hardware name: LENOVO 2356BG6/2356BG6, BIOS G7ET96WW (2.56 ) 09/12/2013 task: ffff88009ae0c4b0 ti: ffff88020e7f0000 task.ti: ffff88020e7f0000 RIP: 0010:[<ffffffffc07e25d8>] [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP: 0018:ffff88020e7f3bc8 EFLAGS: 00010292 RAX: dead000000200200 RBX: ffff8801ec19c900 RCX: 000000018200016d RDX: ffff8801ec19cf80 RSI: ffffea0008bf1d40 RDI: ffff8801ec19c900 RBP: ffff88020e7f3bd8 R08: 000000002fc75a01 R09: 000000018200016d R10: ffffffffc07df6ae R11: ffff88022fc75a98 R12: ffff88021e7cc000 R13: ffff88021e7cca48 R14: ffff88021e7cca50 R15: ffff8801ec19c880 FS: 00007fc1ee3e6700(0000) GS:ffff88023e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f389d8000 CR3: 000000023dc13000 CR4: 00000000001427e0 Stack: ffff88021e7cc000 0000000000000000 ffff88020e7f3be8 ffffffffc07e2622 ffff88020e7f3c38 ffffffffc07df69a ffff880232524160 ffff88020e792d80 0000000000000000 ffff880219b78c00 0000000000000008 ffff8802321686a8 Call Trace: [<ffffffffc07e2622>] ioeventfd_destructor+0x12/0x20 [kvm] [<ffffffffc07df69a>] kvm_put_kvm+0xca/0x210 [kvm] [<ffffffffc07df818>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff811f69f7>] __fput+0xe7/0x250 [<ffffffff811f6bae>] ____fput+0xe/0x10 [<ffffffff81093f04>] task_work_run+0xd4/0xf0 [<ffffffff81079358>] do_exit+0x368/0xa50 [<ffffffff81082c8f>] ? recalc_sigpending+0x1f/0x60 [<ffffffff81079ad5>] do_group_exit+0x45/0xb0 [<ffffffff81085c71>] get_signal+0x291/0x750 [<ffffffff810144d8>] do_signal+0x28/0xab0 [<ffffffff810f3a3b>] ? do_futex+0xdb/0x5d0 [<ffffffff810b7028>] ? __wake_up_locked_key+0x18/0x20 [<ffffffff810f3fa6>] ? SyS_futex+0x76/0x170 [<ffffffff81014fc9>] do_notify_resume+0x69/0xb0 [<ffffffff817cb9af>] int_signal+0x12/0x17 Code: 5d c3 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 8b 7f 20 e8 06 d6 a5 c0 48 8b 43 08 48 8b 13 48 89 df 48 89 42 08 <48> 89 10 48 b8 00 01 10 00 00 RIP [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP <ffff88020e7f3bc8> Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15 13:41:56 +07:00
int ret;
bus_idx = ioeventfd_bus_from_flags(args->flags);
/* must be natural-word sized, or 0 to ignore length */
switch (args->len) {
case 0:
case 1:
case 2:
case 4:
case 8:
break;
default:
return -EINVAL;
}
/* check for range overflow */
if (args->addr + args->len < args->addr)
return -EINVAL;
/* check for extra flags that we don't understand */
if (args->flags & ~KVM_IOEVENTFD_VALID_FLAG_MASK)
return -EINVAL;
/* ioeventfd with no length can't be combined with DATAMATCH */
if (!args->len && (args->flags & KVM_IOEVENTFD_FLAG_DATAMATCH))
return -EINVAL;
kvm: fix double free for fast mmio eventfd We register wildcard mmio eventfd on two buses, once for KVM_MMIO_BUS and once on KVM_FAST_MMIO_BUS but with a single iodev instance. This will lead to an issue: kvm_io_bus_destroy() knows nothing about the devices on two buses pointing to a single dev. Which will lead to double free[1] during exit. Fix this by allocating two instances of iodevs then registering one on KVM_MMIO_BUS and another on KVM_FAST_MMIO_BUS. CPU: 1 PID: 2894 Comm: qemu-system-x86 Not tainted 3.19.0-26-generic #28-Ubuntu Hardware name: LENOVO 2356BG6/2356BG6, BIOS G7ET96WW (2.56 ) 09/12/2013 task: ffff88009ae0c4b0 ti: ffff88020e7f0000 task.ti: ffff88020e7f0000 RIP: 0010:[<ffffffffc07e25d8>] [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP: 0018:ffff88020e7f3bc8 EFLAGS: 00010292 RAX: dead000000200200 RBX: ffff8801ec19c900 RCX: 000000018200016d RDX: ffff8801ec19cf80 RSI: ffffea0008bf1d40 RDI: ffff8801ec19c900 RBP: ffff88020e7f3bd8 R08: 000000002fc75a01 R09: 000000018200016d R10: ffffffffc07df6ae R11: ffff88022fc75a98 R12: ffff88021e7cc000 R13: ffff88021e7cca48 R14: ffff88021e7cca50 R15: ffff8801ec19c880 FS: 00007fc1ee3e6700(0000) GS:ffff88023e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f389d8000 CR3: 000000023dc13000 CR4: 00000000001427e0 Stack: ffff88021e7cc000 0000000000000000 ffff88020e7f3be8 ffffffffc07e2622 ffff88020e7f3c38 ffffffffc07df69a ffff880232524160 ffff88020e792d80 0000000000000000 ffff880219b78c00 0000000000000008 ffff8802321686a8 Call Trace: [<ffffffffc07e2622>] ioeventfd_destructor+0x12/0x20 [kvm] [<ffffffffc07df69a>] kvm_put_kvm+0xca/0x210 [kvm] [<ffffffffc07df818>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff811f69f7>] __fput+0xe7/0x250 [<ffffffff811f6bae>] ____fput+0xe/0x10 [<ffffffff81093f04>] task_work_run+0xd4/0xf0 [<ffffffff81079358>] do_exit+0x368/0xa50 [<ffffffff81082c8f>] ? recalc_sigpending+0x1f/0x60 [<ffffffff81079ad5>] do_group_exit+0x45/0xb0 [<ffffffff81085c71>] get_signal+0x291/0x750 [<ffffffff810144d8>] do_signal+0x28/0xab0 [<ffffffff810f3a3b>] ? do_futex+0xdb/0x5d0 [<ffffffff810b7028>] ? __wake_up_locked_key+0x18/0x20 [<ffffffff810f3fa6>] ? SyS_futex+0x76/0x170 [<ffffffff81014fc9>] do_notify_resume+0x69/0xb0 [<ffffffff817cb9af>] int_signal+0x12/0x17 Code: 5d c3 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 8b 7f 20 e8 06 d6 a5 c0 48 8b 43 08 48 8b 13 48 89 df 48 89 42 08 <48> 89 10 48 b8 00 01 10 00 00 RIP [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP <ffff88020e7f3bc8> Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15 13:41:56 +07:00
ret = kvm_assign_ioeventfd_idx(kvm, bus_idx, args);
if (ret)
goto fail;
/* When length is ignored, MMIO is also put on a separate bus, for
* faster lookups.
*/
if (!args->len && bus_idx == KVM_MMIO_BUS) {
ret = kvm_assign_ioeventfd_idx(kvm, KVM_FAST_MMIO_BUS, args);
if (ret < 0)
goto fast_fail;
}
return 0;
fast_fail:
kvm_deassign_ioeventfd_idx(kvm, bus_idx, args);
fail:
return ret;
}
KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-08 04:08:49 +07:00
int
kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
{
if (args->flags & KVM_IOEVENTFD_FLAG_DEASSIGN)
return kvm_deassign_ioeventfd(kvm, args);
return kvm_assign_ioeventfd(kvm, args);
}