linux_dsm_epyc7002/include/linux/compiler-gcc.h

180 lines
5.8 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
/* SPDX-License-Identifier: GPL-2.0 */
linux/compiler.h: Split into compiler.h and compiler_types.h linux/compiler.h is included indirectly by linux/types.h via uapi/linux/types.h -> uapi/linux/posix_types.h -> linux/stddef.h -> uapi/linux/stddef.h and is needed to provide a proper definition of offsetof. Unfortunately, compiler.h requires a definition of smp_read_barrier_depends() for defining lockless_dereference() and soon for defining READ_ONCE(), which means that all users of READ_ONCE() will need to include asm/barrier.h to avoid splats such as: In file included from include/uapi/linux/stddef.h:1:0, from include/linux/stddef.h:4, from arch/h8300/kernel/asm-offsets.c:11: include/linux/list.h: In function 'list_empty': >> include/linux/compiler.h:343:2: error: implicit declaration of function 'smp_read_barrier_depends' [-Werror=implicit-function-declaration] smp_read_barrier_depends(); /* Enforce dependency ordering from x */ \ ^ A better alternative is to include asm/barrier.h in linux/compiler.h, but this requires a type definition for "bool" on some architectures (e.g. x86), which is defined later by linux/types.h. Type "bool" is also used directly in linux/compiler.h, so the whole thing is pretty fragile. This patch splits compiler.h in two: compiler_types.h contains type annotations, definitions and the compiler-specific parts, whereas compiler.h #includes compiler-types.h and additionally defines macros such as {READ,WRITE.ACCESS}_ONCE(). uapi/linux/stddef.h and linux/linkage.h are then moved over to include linux/compiler_types.h, which fixes the build for h8 and blackfin. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1508840570-22169-2-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 17:22:46 +07:00
#ifndef __LINUX_COMPILER_TYPES_H
#error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
#endif
/*
* Common definitions for all gcc versions go here.
*/
#define GCC_VERSION (__GNUC__ * 10000 \
+ __GNUC_MINOR__ * 100 \
+ __GNUC_PATCHLEVEL__)
/* https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 */
#if GCC_VERSION < 40800
# error Sorry, your compiler is too old - please upgrade it.
#endif
/* Optimization barrier */
lib: make memzero_explicit more robust against dead store elimination In commit 0b053c951829 ("lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR"), we made memzero_explicit() more robust in case LTO would decide to inline memzero_explicit() and eventually find out it could be elimiated as dead store. While using barrier() works well for the case of gcc, recent efforts from LLVMLinux people suggest to use llvm as an alternative to gcc, and there, Stephan found in a simple stand-alone user space example that llvm could nevertheless optimize and thus elimitate the memset(). A similar issue has been observed in the referenced llvm bug report, which is regarded as not-a-bug. Based on some experiments, icc is a bit special on its own, while it doesn't seem to eliminate the memset(), it could do so with an own implementation, and then result in similar findings as with llvm. The fix in this patch now works for all three compilers (also tested with more aggressive optimization levels). Arguably, in the current kernel tree it's more of a theoretical issue, but imho, it's better to be pedantic about it. It's clearly visible with gcc/llvm though, with the below code: if we would have used barrier() only here, llvm would have omitted clearing, not so with barrier_data() variant: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); barrier_data(s); } int main(void) { char buff[20]; memzero_explicit(buff, sizeof(buff)); return 0; } $ gcc -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x0000000000400400 <+0>: lea -0x28(%rsp),%rax 0x0000000000400405 <+5>: movq $0x0,-0x28(%rsp) 0x000000000040040e <+14>: movq $0x0,-0x20(%rsp) 0x0000000000400417 <+23>: movl $0x0,-0x18(%rsp) 0x000000000040041f <+31>: xor %eax,%eax 0x0000000000400421 <+33>: retq End of assembler dump. $ clang -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x00000000004004f0 <+0>: xorps %xmm0,%xmm0 0x00000000004004f3 <+3>: movaps %xmm0,-0x18(%rsp) 0x00000000004004f8 <+8>: movl $0x0,-0x8(%rsp) 0x0000000000400500 <+16>: lea -0x18(%rsp),%rax 0x0000000000400505 <+21>: xor %eax,%eax 0x0000000000400507 <+23>: retq End of assembler dump. As gcc, clang, but also icc defines __GNUC__, it's sufficient to define this in compiler-gcc.h only to be picked up. For a fallback or otherwise unsupported compiler, we define it as a barrier. Similarly, for ecc which does not support gcc inline asm. Reference: https://llvm.org/bugs/show_bug.cgi?id=15495 Reported-by: Stephan Mueller <smueller@chronox.de> Tested-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Stephan Mueller <smueller@chronox.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: mancha security <mancha1@zoho.com> Cc: Mark Charlebois <charlebm@gmail.com> Cc: Behan Webster <behanw@converseincode.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-30 09:13:52 +07:00
/* The "volatile" is due to gcc bugs */
#define barrier() __asm__ __volatile__("": : :"memory")
lib: make memzero_explicit more robust against dead store elimination In commit 0b053c951829 ("lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR"), we made memzero_explicit() more robust in case LTO would decide to inline memzero_explicit() and eventually find out it could be elimiated as dead store. While using barrier() works well for the case of gcc, recent efforts from LLVMLinux people suggest to use llvm as an alternative to gcc, and there, Stephan found in a simple stand-alone user space example that llvm could nevertheless optimize and thus elimitate the memset(). A similar issue has been observed in the referenced llvm bug report, which is regarded as not-a-bug. Based on some experiments, icc is a bit special on its own, while it doesn't seem to eliminate the memset(), it could do so with an own implementation, and then result in similar findings as with llvm. The fix in this patch now works for all three compilers (also tested with more aggressive optimization levels). Arguably, in the current kernel tree it's more of a theoretical issue, but imho, it's better to be pedantic about it. It's clearly visible with gcc/llvm though, with the below code: if we would have used barrier() only here, llvm would have omitted clearing, not so with barrier_data() variant: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); barrier_data(s); } int main(void) { char buff[20]; memzero_explicit(buff, sizeof(buff)); return 0; } $ gcc -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x0000000000400400 <+0>: lea -0x28(%rsp),%rax 0x0000000000400405 <+5>: movq $0x0,-0x28(%rsp) 0x000000000040040e <+14>: movq $0x0,-0x20(%rsp) 0x0000000000400417 <+23>: movl $0x0,-0x18(%rsp) 0x000000000040041f <+31>: xor %eax,%eax 0x0000000000400421 <+33>: retq End of assembler dump. $ clang -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x00000000004004f0 <+0>: xorps %xmm0,%xmm0 0x00000000004004f3 <+3>: movaps %xmm0,-0x18(%rsp) 0x00000000004004f8 <+8>: movl $0x0,-0x8(%rsp) 0x0000000000400500 <+16>: lea -0x18(%rsp),%rax 0x0000000000400505 <+21>: xor %eax,%eax 0x0000000000400507 <+23>: retq End of assembler dump. As gcc, clang, but also icc defines __GNUC__, it's sufficient to define this in compiler-gcc.h only to be picked up. For a fallback or otherwise unsupported compiler, we define it as a barrier. Similarly, for ecc which does not support gcc inline asm. Reference: https://llvm.org/bugs/show_bug.cgi?id=15495 Reported-by: Stephan Mueller <smueller@chronox.de> Tested-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Stephan Mueller <smueller@chronox.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: mancha security <mancha1@zoho.com> Cc: Mark Charlebois <charlebm@gmail.com> Cc: Behan Webster <behanw@converseincode.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-30 09:13:52 +07:00
/*
* This version is i.e. to prevent dead stores elimination on @ptr
* where gcc and llvm may behave differently when otherwise using
* normal barrier(): while gcc behavior gets along with a normal
* barrier(), llvm needs an explicit input variable to be assumed
* clobbered. The issue is as follows: while the inline asm might
* access any memory it wants, the compiler could have fit all of
* @ptr into memory registers instead, and since @ptr never escaped
* from that, it proved that the inline asm wasn't touching any of
lib: make memzero_explicit more robust against dead store elimination In commit 0b053c951829 ("lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR"), we made memzero_explicit() more robust in case LTO would decide to inline memzero_explicit() and eventually find out it could be elimiated as dead store. While using barrier() works well for the case of gcc, recent efforts from LLVMLinux people suggest to use llvm as an alternative to gcc, and there, Stephan found in a simple stand-alone user space example that llvm could nevertheless optimize and thus elimitate the memset(). A similar issue has been observed in the referenced llvm bug report, which is regarded as not-a-bug. Based on some experiments, icc is a bit special on its own, while it doesn't seem to eliminate the memset(), it could do so with an own implementation, and then result in similar findings as with llvm. The fix in this patch now works for all three compilers (also tested with more aggressive optimization levels). Arguably, in the current kernel tree it's more of a theoretical issue, but imho, it's better to be pedantic about it. It's clearly visible with gcc/llvm though, with the below code: if we would have used barrier() only here, llvm would have omitted clearing, not so with barrier_data() variant: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); barrier_data(s); } int main(void) { char buff[20]; memzero_explicit(buff, sizeof(buff)); return 0; } $ gcc -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x0000000000400400 <+0>: lea -0x28(%rsp),%rax 0x0000000000400405 <+5>: movq $0x0,-0x28(%rsp) 0x000000000040040e <+14>: movq $0x0,-0x20(%rsp) 0x0000000000400417 <+23>: movl $0x0,-0x18(%rsp) 0x000000000040041f <+31>: xor %eax,%eax 0x0000000000400421 <+33>: retq End of assembler dump. $ clang -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x00000000004004f0 <+0>: xorps %xmm0,%xmm0 0x00000000004004f3 <+3>: movaps %xmm0,-0x18(%rsp) 0x00000000004004f8 <+8>: movl $0x0,-0x8(%rsp) 0x0000000000400500 <+16>: lea -0x18(%rsp),%rax 0x0000000000400505 <+21>: xor %eax,%eax 0x0000000000400507 <+23>: retq End of assembler dump. As gcc, clang, but also icc defines __GNUC__, it's sufficient to define this in compiler-gcc.h only to be picked up. For a fallback or otherwise unsupported compiler, we define it as a barrier. Similarly, for ecc which does not support gcc inline asm. Reference: https://llvm.org/bugs/show_bug.cgi?id=15495 Reported-by: Stephan Mueller <smueller@chronox.de> Tested-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Stephan Mueller <smueller@chronox.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: mancha security <mancha1@zoho.com> Cc: Mark Charlebois <charlebm@gmail.com> Cc: Behan Webster <behanw@converseincode.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-30 09:13:52 +07:00
* it. This version works well with both compilers, i.e. we're telling
* the compiler that the inline asm absolutely may see the contents
* of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495
*/
#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory")
/*
* This macro obfuscates arithmetic on a variable address so that gcc
* shouldn't recognize the original var, and make assumptions about it.
*
* This is needed because the C standard makes it undefined to do
* pointer arithmetic on "objects" outside their boundaries and the
* gcc optimizers assume this is the case. In particular they
* assume such arithmetic does not wrap.
*
* A miscompilation has been observed because of this on PPC.
* To work around it we hide the relationship of the pointer and the object
* using this macro.
*
* Versions of the ppc64 compiler before 4.1 had a bug where use of
* RELOC_HIDE could trash r30. The bug can be worked around by changing
* the inline assembly constraint from =g to =r, in this particular
* case either is valid.
*/
#define RELOC_HIDE(ptr, off) \
({ \
unsigned long __ptr; \
__asm__ ("" : "=r"(__ptr) : "0"(ptr)); \
(typeof(ptr)) (__ptr + (off)); \
})
/*
* A trick to suppress uninitialized variable warning without generating any
* code
*/
#define uninitialized_var(x) x = x
x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE Commit 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by: WANG Chao <chao.wang@ucloud.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: linux-kbuild@vger.kernel.org Cc: srinivas.eeda@oracle.com Cc: stable <stable@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn
2018-12-10 23:37:25 +07:00
#ifdef CONFIG_RETPOLINE
#define __noretpoline __attribute__((__indirect_branch__("keep")))
#endif
#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
#define __compiletime_object_size(obj) __builtin_object_size(obj, 0)
#define __compiletime_warning(message) __attribute__((__warning__(message)))
#define __compiletime_error(message) __attribute__((__error__(message)))
#if defined(LATENT_ENTROPY_PLUGIN) && !defined(__CHECKER__)
#define __latent_entropy __attribute__((latent_entropy))
#endif
bug.h: work around GCC PR82365 in BUG() Looking at functions with large stack frames across all architectures led me discovering that BUG() suffers from the same problem as fortify_panic(), which I've added a workaround for already. In short, variables that go out of scope by calling a noreturn function or __builtin_unreachable() keep using stack space in functions afterwards. A workaround that was identified is to insert an empty assembler statement just before calling the function that doesn't return. I'm adding a macro "barrier_before_unreachable()" to document this, and insert calls to that in all instances of BUG() that currently suffer from this problem. The files that saw the largest change from this had these frame sizes before, and much less with my patch: fs/ext4/inode.c:82:1: warning: the frame size of 1672 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/namei.c:434:1: warning: the frame size of 904 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/super.c:2279:1: warning: the frame size of 1160 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/xattr.c:146:1: warning: the frame size of 1168 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/f2fs/inode.c:152:1: warning: the frame size of 1424 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_core.c:1195:1: warning: the frame size of 1068 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_core.c:395:1: warning: the frame size of 1084 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_ftp.c:298:1: warning: the frame size of 928 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_ftp.c:418:1: warning: the frame size of 908 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_lblcr.c:718:1: warning: the frame size of 960 bytes is larger than 800 bytes [-Wframe-larger-than=] drivers/net/xen-netback/netback.c:1500:1: warning: the frame size of 1088 bytes is larger than 800 bytes [-Wframe-larger-than=] In case of ARC and CRIS, it turns out that the BUG() implementation actually does return (or at least the compiler thinks it does), resulting in lots of warnings about uninitialized variable use and leaving noreturn functions, such as: block/cfq-iosched.c: In function 'cfq_async_queue_prio': block/cfq-iosched.c:3804:1: error: control reaches end of non-void function [-Werror=return-type] include/linux/dmaengine.h: In function 'dma_maxpq': include/linux/dmaengine.h:1123:1: error: control reaches end of non-void function [-Werror=return-type] This makes them call __builtin_trap() instead, which should normally dump the stack and kill the current process, like some of the other architectures already do. I tried adding barrier_before_unreachable() to panic() and fortify_panic() as well, but that had very little effect, so I'm not submitting that patch. Vineet said: : For ARC, it is double win. : : 1. Fixes 3 -Wreturn-type warnings : : | ../net/core/ethtool.c:311:1: warning: control reaches end of non-void function : [-Wreturn-type] : | ../kernel/sched/core.c:3246:1: warning: control reaches end of non-void function : [-Wreturn-type] : | ../include/linux/sunrpc/svc_xprt.h:180:1: warning: control reaches end of : non-void function [-Wreturn-type] : : 2. bloat-o-meter reports code size improvements as gcc elides the : generated code for stack return. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365 Link: http://lkml.kernel.org/r/20171219114112.939391-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Tested-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christopher Li <sparse@chrisli.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-22 05:45:54 +07:00
/*
* calling noreturn functions, __builtin_unreachable() and __builtin_trap()
* confuse the stack allocation in gcc, leading to overly large stack
* frames, see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365
*
* Adding an empty inline assembly before it works around the problem
*/
#define barrier_before_unreachable() asm volatile("")
/*
* Mark a position in code as unreachable. This can be used to
* suppress control flow warnings after asm blocks that transfer
* control elsewhere.
*/
#define unreachable() \
bug.h: work around GCC PR82365 in BUG() Looking at functions with large stack frames across all architectures led me discovering that BUG() suffers from the same problem as fortify_panic(), which I've added a workaround for already. In short, variables that go out of scope by calling a noreturn function or __builtin_unreachable() keep using stack space in functions afterwards. A workaround that was identified is to insert an empty assembler statement just before calling the function that doesn't return. I'm adding a macro "barrier_before_unreachable()" to document this, and insert calls to that in all instances of BUG() that currently suffer from this problem. The files that saw the largest change from this had these frame sizes before, and much less with my patch: fs/ext4/inode.c:82:1: warning: the frame size of 1672 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/namei.c:434:1: warning: the frame size of 904 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/super.c:2279:1: warning: the frame size of 1160 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/xattr.c:146:1: warning: the frame size of 1168 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/f2fs/inode.c:152:1: warning: the frame size of 1424 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_core.c:1195:1: warning: the frame size of 1068 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_core.c:395:1: warning: the frame size of 1084 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_ftp.c:298:1: warning: the frame size of 928 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_ftp.c:418:1: warning: the frame size of 908 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_lblcr.c:718:1: warning: the frame size of 960 bytes is larger than 800 bytes [-Wframe-larger-than=] drivers/net/xen-netback/netback.c:1500:1: warning: the frame size of 1088 bytes is larger than 800 bytes [-Wframe-larger-than=] In case of ARC and CRIS, it turns out that the BUG() implementation actually does return (or at least the compiler thinks it does), resulting in lots of warnings about uninitialized variable use and leaving noreturn functions, such as: block/cfq-iosched.c: In function 'cfq_async_queue_prio': block/cfq-iosched.c:3804:1: error: control reaches end of non-void function [-Werror=return-type] include/linux/dmaengine.h: In function 'dma_maxpq': include/linux/dmaengine.h:1123:1: error: control reaches end of non-void function [-Werror=return-type] This makes them call __builtin_trap() instead, which should normally dump the stack and kill the current process, like some of the other architectures already do. I tried adding barrier_before_unreachable() to panic() and fortify_panic() as well, but that had very little effect, so I'm not submitting that patch. Vineet said: : For ARC, it is double win. : : 1. Fixes 3 -Wreturn-type warnings : : | ../net/core/ethtool.c:311:1: warning: control reaches end of non-void function : [-Wreturn-type] : | ../kernel/sched/core.c:3246:1: warning: control reaches end of non-void function : [-Wreturn-type] : | ../include/linux/sunrpc/svc_xprt.h:180:1: warning: control reaches end of : non-void function [-Wreturn-type] : : 2. bloat-o-meter reports code size improvements as gcc elides the : generated code for stack return. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365 Link: http://lkml.kernel.org/r/20171219114112.939391-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Tested-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christopher Li <sparse@chrisli.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-22 05:45:54 +07:00
do { \
annotate_unreachable(); \
barrier_before_unreachable(); \
__builtin_unreachable(); \
} while (0)
#if defined(RANDSTRUCT_PLUGIN) && !defined(__CHECKER__)
gcc-plugins: Add the randstruct plugin This randstruct plugin is modified from Brad Spengler/PaX Team's code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. The randstruct GCC plugin randomizes the layout of selected structures at compile time, as a probabilistic defense against attacks that need to know the layout of structures within the kernel. This is most useful for "in-house" kernel builds where neither the randomization seed nor other build artifacts are made available to an attacker. While less useful for distribution kernels (where the randomization seed must be exposed for third party kernel module builds), it still has some value there since now all kernel builds would need to be tracked by an attacker. In more performance sensitive scenarios, GCC_PLUGIN_RANDSTRUCT_PERFORMANCE can be selected to make a best effort to restrict randomization to cacheline-sized groups of elements, and will not randomize bitfields. This comes at the cost of reduced randomization. Two annotations are defined,__randomize_layout and __no_randomize_layout, which respectively tell the plugin to either randomize or not to randomize instances of the struct in question. Follow-on patches enable the auto-detection logic for selecting structures for randomization that contain only function pointers. It is disabled here to assist with bisection. Since any randomized structs must be initialized using designated initializers, __randomize_layout includes the __designated_init annotation even when the plugin is disabled so that all builds will require the needed initialization. (With the plugin enabled, annotations for automatically chosen structures are marked as well.) The main differences between this implemenation and grsecurity are: - disable automatic struct selection (to be enabled in follow-up patch) - add designated_init attribute at runtime and for manual marking - clarify debugging output to differentiate bad cast warnings - add whitelisting infrastructure - support gcc 7's DECL_ALIGN and DECL_MODE changes (Laura Abbott) - raise minimum required GCC version to 4.7 Earlier versions of this patch series were ported by Michael Leibowitz. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-05-06 13:37:45 +07:00
#define __randomize_layout __attribute__((randomize_layout))
#define __no_randomize_layout __attribute__((no_randomize_layout))
/* This anon struct can add padding, so only enable it under randstruct. */
#define randomized_struct_fields_start struct {
#define randomized_struct_fields_end } __randomize_layout;
gcc-plugins: Add the randstruct plugin This randstruct plugin is modified from Brad Spengler/PaX Team's code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. The randstruct GCC plugin randomizes the layout of selected structures at compile time, as a probabilistic defense against attacks that need to know the layout of structures within the kernel. This is most useful for "in-house" kernel builds where neither the randomization seed nor other build artifacts are made available to an attacker. While less useful for distribution kernels (where the randomization seed must be exposed for third party kernel module builds), it still has some value there since now all kernel builds would need to be tracked by an attacker. In more performance sensitive scenarios, GCC_PLUGIN_RANDSTRUCT_PERFORMANCE can be selected to make a best effort to restrict randomization to cacheline-sized groups of elements, and will not randomize bitfields. This comes at the cost of reduced randomization. Two annotations are defined,__randomize_layout and __no_randomize_layout, which respectively tell the plugin to either randomize or not to randomize instances of the struct in question. Follow-on patches enable the auto-detection logic for selecting structures for randomization that contain only function pointers. It is disabled here to assist with bisection. Since any randomized structs must be initialized using designated initializers, __randomize_layout includes the __designated_init annotation even when the plugin is disabled so that all builds will require the needed initialization. (With the plugin enabled, annotations for automatically chosen structures are marked as well.) The main differences between this implemenation and grsecurity are: - disable automatic struct selection (to be enabled in follow-up patch) - add designated_init attribute at runtime and for manual marking - clarify debugging output to differentiate bad cast warnings - add whitelisting infrastructure - support gcc 7's DECL_ALIGN and DECL_MODE changes (Laura Abbott) - raise minimum required GCC version to 4.7 Earlier versions of this patch series were ported by Michael Leibowitz. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-05-06 13:37:45 +07:00
#endif
/*
* GCC 'asm goto' miscompiles certain code sequences:
*
* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
*
* Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
*
* (asm goto is automatically volatile - the naming reflects this.)
*/
#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
/*
* sparse (__CHECKER__) pretends to be gcc, but can't do constant
* folding in __builtin_bswap*() (yet), so don't set these for it.
*/
#if defined(CONFIG_ARCH_USE_BUILTIN_BSWAP) && !defined(__CHECKER__)
#define __HAVE_BUILTIN_BSWAP32__
#define __HAVE_BUILTIN_BSWAP64__
#define __HAVE_BUILTIN_BSWAP16__
#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP && !__CHECKER__ */
#if GCC_VERSION >= 70000
#define KASAN_ABI_VERSION 5
#elif GCC_VERSION >= 50000
#define KASAN_ABI_VERSION 4
#elif GCC_VERSION >= 40902
#define KASAN_ABI_VERSION 3
#endif
kasan: add CONFIG_KASAN_GENERIC and CONFIG_KASAN_SW_TAGS This commit splits the current CONFIG_KASAN config option into two: 1. CONFIG_KASAN_GENERIC, that enables the generic KASAN mode (the one that exists now); 2. CONFIG_KASAN_SW_TAGS, that enables the software tag-based KASAN mode. The name CONFIG_KASAN_SW_TAGS is chosen as in the future we will have another hardware tag-based KASAN mode, that will rely on hardware memory tagging support in arm64. With CONFIG_KASAN_SW_TAGS enabled, compiler options are changed to instrument kernel files with -fsantize=kernel-hwaddress (except the ones for which KASAN_SANITIZE := n is set). Both CONFIG_KASAN_GENERIC and CONFIG_KASAN_SW_TAGS support both CONFIG_KASAN_INLINE and CONFIG_KASAN_OUTLINE instrumentation modes. This commit also adds empty placeholder (for now) implementation of tag-based KASAN specific hooks inserted by the compiler and adjusts common hooks implementation. While this commit adds the CONFIG_KASAN_SW_TAGS config option, this option is not selectable, as it depends on HAVE_ARCH_KASAN_SW_TAGS, which we will enable once all the infrastracture code has been added. Link: http://lkml.kernel.org/r/b2550106eb8a68b10fefbabce820910b115aa853.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 15:29:53 +07:00
#if __has_attribute(__no_sanitize_address__)
#define __no_sanitize_address __attribute__((no_sanitize_address))
#else
#define __no_sanitize_address
#endif
#if defined(__SANITIZE_THREAD__) && __has_attribute(__no_sanitize_thread__)
#define __no_sanitize_thread __attribute__((no_sanitize_thread))
#else
#define __no_sanitize_thread
#endif
#if GCC_VERSION >= 50100
#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
#endif
kbuild: add macro for controlling warnings to linux/compiler.h I have occasionally run into a situation where it would make sense to control a compiler warning from a source file rather than doing so from a Makefile using the $(cc-disable-warning, ...) or $(cc-option, ...) helpers. The approach here is similar to what glibc uses, using __diag() and related macros to encapsulate a _Pragma("GCC diagnostic ...") statement that gets turned into the respective "#pragma GCC diagnostic ..." by the preprocessor when the macro gets expanded. Like glibc, I also have an argument to pass the affected compiler version, but decided to actually evaluate that one. For now, this supports GCC_4_6, GCC_4_7, GCC_4_8, GCC_4_9, GCC_5, GCC_6, GCC_7, GCC_8 and GCC_9. Adding support for CLANG_5 and other interesting versions is straightforward here. GNU compilers starting with gcc-4.2 could support it in principle, but "#pragma GCC diagnostic push" was only added in gcc-4.6, so it seems simpler to not deal with those at all. The same versions show a large number of warnings already, so it seems easier to just leave it at that and not do a more fine-grained control for them. The use cases I found so far include: - turning off the gcc-8 -Wattribute-alias warning inside of the SYSCALL_DEFINEx() macro without having to do it globally. - Reducing the build time for a simple re-make after a change, once we move the warnings from ./Makefile and ./scripts/Makefile.extrawarn into linux/compiler.h - More control over the warnings based on other configurations, using preprocessor syntax instead of Makefile syntax. This should make it easier for the average developer to understand and change things. - Adding an easy way to turn the W=1 option on unconditionally for a subdirectory or a specific file. This has been requested by several developers in the past that want to have their subsystems W=1 clean. - Integrating clang better into the build systems. Clang supports more warnings than GCC, and we probably want to classify them as default, W=1, W=2 etc, but there are cases in which the warnings should be classified differently due to excessive false positives from one or the other compiler. - Adding a way to turn the default warnings into errors (e.g. using a new "make E=0" tag) while not also turning the W=1 warnings into errors. This patch for now just adds the minimal infrastructure in order to do the first of the list above. As the #pragma GCC diagnostic takes precedence over command line options, the next step would be to convert a lot of the individual Makefiles that set nonstandard options to use __diag() instead. [paul.burton@mips.com: - Rebase atop current master. - Add __diag_GCC, or more generally __diag_<compiler>, abstraction to avoid code outside of linux/compiler-gcc.h needing to duplicate knowledge about different GCC versions. - Add a comment argument to __diag_{ignore,warn,error} which isn't used in the expansion of the macros but serves to push people to document the reason for using them - per feedback from Kees Cook. - Translate severity to GCC-specific pragmas in linux/compiler-gcc.h rather than using GCC-specific in linux/compiler_types.h. - Drop all but GCC 8 macros, since we only need to define macros for versions that we need to introduce pragmas for, and as of this series that's just GCC 8. - Capitalize comments in linux/compiler-gcc.h to match the style of the rest of the file. - Line up macro definitions with tabs in linux/compiler-gcc.h.] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-20 03:14:56 +07:00
/*
* Turn individual warnings and errors on and off locally, depending
* on version.
*/
#define __diag_GCC(version, severity, s) \
__diag_GCC_ ## version(__diag_GCC_ ## severity s)
/* Severity used in pragma directives */
#define __diag_GCC_ignore ignored
#define __diag_GCC_warn warning
#define __diag_GCC_error error
#define __diag_str1(s) #s
#define __diag_str(s) __diag_str1(s)
#define __diag(s) _Pragma(__diag_str(GCC diagnostic s))
#if GCC_VERSION >= 80000
#define __diag_GCC_8(s) __diag(s)
#else
#define __diag_GCC_8(s)
#endif
bpf: Disable GCC -fgcse optimization for ___bpf_prog_run() On x86-64, with CONFIG_RETPOLINE=n, GCC's "global common subexpression elimination" optimization results in ___bpf_prog_run()'s jumptable code changing from this: select_insn: jmp *jumptable(, %rax, 8) ... ALU64_ADD_X: ... jmp *jumptable(, %rax, 8) ALU_ADD_X: ... jmp *jumptable(, %rax, 8) to this: select_insn: mov jumptable, %r12 jmp *(%r12, %rax, 8) ... ALU64_ADD_X: ... jmp *(%r12, %rax, 8) ALU_ADD_X: ... jmp *(%r12, %rax, 8) The jumptable address is placed in a register once, at the beginning of the function. The function execution can then go through multiple indirect jumps which rely on that same register value. This has a few issues: 1) Objtool isn't smart enough to be able to track such a register value across multiple recursive indirect jumps through the jump table. 2) With CONFIG_RETPOLINE enabled, this optimization actually results in a small slowdown. I measured a ~4.7% slowdown in the test_bpf "tcpdump port 22" selftest. This slowdown is actually predicted by the GCC manual: Note: When compiling a program using computed gotos, a GCC extension, you may get better run-time performance if you disable the global common subexpression elimination pass by adding -fno-gcse to the command line. So just disable the optimization for this function. Fixes: e55a73251da3 ("bpf: Fix ORC unwinding in non-JIT BPF code") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/30c3ca29ba037afcbd860a8672eef0021addf9fe.1563413318.git.jpoimboe@redhat.com
2019-07-18 08:36:45 +07:00
#define __no_fgcse __attribute__((optimize("-fno-gcse")))