linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_csr.c

577 lines
16 KiB
C
Raw Normal View History

drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#include <linux/firmware.h>
#include "i915_drv.h"
#include "i915_reg.h"
/**
* DOC: csr support for dmc
*
* Display Context Save and Restore (CSR) firmware support added from gen9
* onwards to drive newly added DMC (Display microcontroller) in display
* engine to save and restore the state of display engine when it enter into
* low-power state and comes back to normal.
*/
#define ICL_CSR_PATH "i915/icl_dmc_ver1_07.bin"
#define ICL_CSR_VERSION_REQUIRED CSR_VERSION(1, 7)
#define ICL_CSR_MAX_FW_SIZE 0x6000
#define CNL_CSR_PATH "i915/cnl_dmc_ver1_07.bin"
#define CNL_CSR_VERSION_REQUIRED CSR_VERSION(1, 7)
#define CNL_CSR_MAX_FW_SIZE GLK_CSR_MAX_FW_SIZE
MODULE_FIRMWARE(CNL_CSR_PATH);
#define GLK_CSR_PATH "i915/glk_dmc_ver1_04.bin"
#define GLK_CSR_VERSION_REQUIRED CSR_VERSION(1, 4)
#define GLK_CSR_MAX_FW_SIZE 0x4000
MODULE_FIRMWARE(GLK_CSR_PATH);
#define KBL_CSR_PATH "i915/kbl_dmc_ver1_04.bin"
#define KBL_CSR_VERSION_REQUIRED CSR_VERSION(1, 4)
#define KBL_CSR_MAX_FW_SIZE BXT_CSR_MAX_FW_SIZE
MODULE_FIRMWARE(KBL_CSR_PATH);
#define SKL_CSR_PATH "i915/skl_dmc_ver1_27.bin"
#define SKL_CSR_VERSION_REQUIRED CSR_VERSION(1, 27)
#define SKL_CSR_MAX_FW_SIZE BXT_CSR_MAX_FW_SIZE
MODULE_FIRMWARE(SKL_CSR_PATH);
#define BXT_CSR_PATH "i915/bxt_dmc_ver1_07.bin"
#define BXT_CSR_VERSION_REQUIRED CSR_VERSION(1, 7)
#define BXT_CSR_MAX_FW_SIZE 0x3000
MODULE_FIRMWARE(BXT_CSR_PATH);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
#define CSR_DEFAULT_FW_OFFSET 0xFFFFFFFF
struct intel_css_header {
/* 0x09 for DMC */
uint32_t module_type;
/* Includes the DMC specific header in dwords */
uint32_t header_len;
/* always value would be 0x10000 */
uint32_t header_ver;
/* Not used */
uint32_t module_id;
/* Not used */
uint32_t module_vendor;
/* in YYYYMMDD format */
uint32_t date;
/* Size in dwords (CSS_Headerlen + PackageHeaderLen + dmc FWsLen)/4 */
uint32_t size;
/* Not used */
uint32_t key_size;
/* Not used */
uint32_t modulus_size;
/* Not used */
uint32_t exponent_size;
/* Not used */
uint32_t reserved1[12];
/* Major Minor */
uint32_t version;
/* Not used */
uint32_t reserved2[8];
/* Not used */
uint32_t kernel_header_info;
} __packed;
struct intel_fw_info {
uint16_t reserved1;
/* Stepping (A, B, C, ..., *). * is a wildcard */
char stepping;
/* Sub-stepping (0, 1, ..., *). * is a wildcard */
char substepping;
uint32_t offset;
uint32_t reserved2;
} __packed;
struct intel_package_header {
/* DMC container header length in dwords */
unsigned char header_len;
/* always value would be 0x01 */
unsigned char header_ver;
unsigned char reserved[10];
/* Number of valid entries in the FWInfo array below */
uint32_t num_entries;
struct intel_fw_info fw_info[20];
} __packed;
struct intel_dmc_header {
/* always value would be 0x40403E3E */
uint32_t signature;
/* DMC binary header length */
unsigned char header_len;
/* 0x01 */
unsigned char header_ver;
/* Reserved */
uint16_t dmcc_ver;
/* Major, Minor */
uint32_t project;
/* Firmware program size (excluding header) in dwords */
uint32_t fw_size;
/* Major Minor version */
uint32_t fw_version;
/* Number of valid MMIO cycles present. */
uint32_t mmio_count;
/* MMIO address */
uint32_t mmioaddr[8];
/* MMIO data */
uint32_t mmiodata[8];
/* FW filename */
unsigned char dfile[32];
uint32_t reserved1[2];
} __packed;
struct stepping_info {
char stepping;
char substepping;
};
static const struct stepping_info skl_stepping_info[] = {
{'A', '0'}, {'B', '0'}, {'C', '0'},
{'D', '0'}, {'E', '0'}, {'F', '0'},
{'G', '0'}, {'H', '0'}, {'I', '0'},
{'J', '0'}, {'K', '0'}
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
};
static const struct stepping_info bxt_stepping_info[] = {
{'A', '0'}, {'A', '1'}, {'A', '2'},
{'B', '0'}, {'B', '1'}, {'B', '2'}
};
static const struct stepping_info icl_stepping_info[] = {
{'A', '0'}, {'A', '1'}, {'A', '2'},
{'B', '0'}, {'B', '2'},
{'C', '0'}
};
static const struct stepping_info no_stepping_info = { '*', '*' };
static const struct stepping_info *
intel_get_stepping_info(struct drm_i915_private *dev_priv)
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
{
const struct stepping_info *si;
unsigned int size;
if (IS_ICELAKE(dev_priv)) {
size = ARRAY_SIZE(icl_stepping_info);
si = icl_stepping_info;
} else if (IS_SKYLAKE(dev_priv)) {
size = ARRAY_SIZE(skl_stepping_info);
si = skl_stepping_info;
} else if (IS_BROXTON(dev_priv)) {
size = ARRAY_SIZE(bxt_stepping_info);
si = bxt_stepping_info;
} else {
size = 0;
si = NULL;
}
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
if (INTEL_REVID(dev_priv) < size)
return si + INTEL_REVID(dev_priv);
return &no_stepping_info;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
static void gen9_set_dc_state_debugmask(struct drm_i915_private *dev_priv)
{
uint32_t val, mask;
mask = DC_STATE_DEBUG_MASK_MEMORY_UP;
if (IS_GEN9_LP(dev_priv))
mask |= DC_STATE_DEBUG_MASK_CORES;
/* The below bit doesn't need to be cleared ever afterwards */
val = I915_READ(DC_STATE_DEBUG);
if ((val & mask) != mask) {
val |= mask;
I915_WRITE(DC_STATE_DEBUG, val);
POSTING_READ(DC_STATE_DEBUG);
}
}
/**
* intel_csr_load_program() - write the firmware from memory to register.
* @dev_priv: i915 drm device.
*
* CSR firmware is read from a .bin file and kept in internal memory one time.
* Everytime display comes back from low power state this function is called to
* copy the firmware from internal memory to registers.
*/
void intel_csr_load_program(struct drm_i915_private *dev_priv)
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
{
u32 *payload = dev_priv->csr.dmc_payload;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
uint32_t i, fw_size;
if (!HAS_CSR(dev_priv)) {
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
DRM_ERROR("No CSR support available for this platform\n");
return;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
if (!dev_priv->csr.dmc_payload) {
DRM_ERROR("Tried to program CSR with empty payload\n");
return;
}
drm/i915/skl: Added a check for the hardware status of csr fw before loading. Dmc will restore the csr program except DC9, cold boot, warm reset, PCI function level reset, and hibernate/suspend. intel_csr_load_program() function is used to load the firmware data from kernel memory to csr address space. All values of csr address space will be zero if it got reset and the first byte of csr program is always a non-zero if firmware is loaded successfuly. Based on hardware status will load the firmware. Without this condition check if we overwrite the firmware data the counters exposed for dc5/dc6 (help for debugging) will be nullified. Note: Above commit message seems to be confused and the real problem apparently going on is that for suspend-to-idle and system standby the firmware survives (it's like runtime pm), but it doesn't for suspend-to-mem and hibernate-to-disk. All the other talking about DC9 and pci reset are irrelevant for the path touched here (only driver load and system resume functions) and might not be true statements. v1: Initial version. v2: Based on review comments from Daniel, - Added a check to know hardware status and load the firmware if not loaded. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com> Reviewed-by: A.Sunil Kamath <sunil.kamath@intel.com> [danvet: Explain clearly in the code comment when we need to reload and when not and make it a FIXME. Also deconfuse the commit message with a note. Also: Make. it. compile.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-26 03:06:05 +07:00
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
fw_size = dev_priv->csr.dmc_fw_size;
assert_rpm_wakelock_held(dev_priv);
preempt_disable();
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
for (i = 0; i < fw_size; i++)
I915_WRITE_FW(CSR_PROGRAM(i), payload[i]);
preempt_enable();
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
for (i = 0; i < dev_priv->csr.mmio_count; i++) {
I915_WRITE(dev_priv->csr.mmioaddr[i],
dev_priv->csr.mmiodata[i]);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
dev_priv->csr.dc_state = 0;
gen9_set_dc_state_debugmask(dev_priv);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
static uint32_t *parse_csr_fw(struct drm_i915_private *dev_priv,
const struct firmware *fw)
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
{
struct intel_css_header *css_header;
struct intel_package_header *package_header;
struct intel_dmc_header *dmc_header;
struct intel_csr *csr = &dev_priv->csr;
const struct stepping_info *si = intel_get_stepping_info(dev_priv);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
uint32_t dmc_offset = CSR_DEFAULT_FW_OFFSET, readcount = 0, nbytes;
uint32_t i;
uint32_t *dmc_payload;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
drm/i915/skl: Refuse to load outdated dmc firmware There is known issue on GT interrupt delivery with DC6 and firmwares <1.21. There is a suspicion that this causes spurious gpu hangs on driver init and with some workloads, as upgrading the firmware to 1.21 makes these problems disappear. As of now the current version included in distribution firmware packages is very like to be 1.19. Play it safe and refuse to load a firmware version that may affect gpu side stability. With < 1.23 there is a palette and dmc ram corruption issue so blacklist anything below that. v2: Refuse to load fw instead of notifying the user v3: Rebase on header version changes v4: Refuse to load anything less than 1.23 v5: Give enough information for user for finding correct fw (Chris) v6: better url and formatting (Chris) v7: move error log for each fail path (Mika) bail out earlier in load path (Imre) v8: Fix the version check (Imre) Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> References: https://01.org/linuxgraphics/downloads/skldmcver121 References: https://01.org/linuxgraphics/downloads/skylake-dmc-1.23 Testcase: igt/gem_exec_nop Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446220336-32392-1-git-send-email-mika.kuoppala@intel.com Tested-by: Daniel Stone <daniels@collabora.com> # SKL Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2015-10-30 22:52:16 +07:00
if (!fw)
return NULL;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
/* Extract CSS Header information*/
css_header = (struct intel_css_header *)fw->data;
if (sizeof(struct intel_css_header) !=
(css_header->header_len * 4)) {
DRM_ERROR("DMC firmware has wrong CSS header length "
"(%u bytes)\n",
(css_header->header_len * 4));
return NULL;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
if (csr->required_version &&
css_header->version != csr->required_version) {
DRM_INFO("Refusing to load DMC firmware v%u.%u,"
" please use v%u.%u\n",
CSR_VERSION_MAJOR(css_header->version),
CSR_VERSION_MINOR(css_header->version),
CSR_VERSION_MAJOR(csr->required_version),
CSR_VERSION_MINOR(csr->required_version));
return NULL;
drm/i915/skl: Refuse to load outdated dmc firmware There is known issue on GT interrupt delivery with DC6 and firmwares <1.21. There is a suspicion that this causes spurious gpu hangs on driver init and with some workloads, as upgrading the firmware to 1.21 makes these problems disappear. As of now the current version included in distribution firmware packages is very like to be 1.19. Play it safe and refuse to load a firmware version that may affect gpu side stability. With < 1.23 there is a palette and dmc ram corruption issue so blacklist anything below that. v2: Refuse to load fw instead of notifying the user v3: Rebase on header version changes v4: Refuse to load anything less than 1.23 v5: Give enough information for user for finding correct fw (Chris) v6: better url and formatting (Chris) v7: move error log for each fail path (Mika) bail out earlier in load path (Imre) v8: Fix the version check (Imre) Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> References: https://01.org/linuxgraphics/downloads/skldmcver121 References: https://01.org/linuxgraphics/downloads/skylake-dmc-1.23 Testcase: igt/gem_exec_nop Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446220336-32392-1-git-send-email-mika.kuoppala@intel.com Tested-by: Daniel Stone <daniels@collabora.com> # SKL Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2015-10-30 22:52:16 +07:00
}
csr->version = css_header->version;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
readcount += sizeof(struct intel_css_header);
/* Extract Package Header information*/
package_header = (struct intel_package_header *)
&fw->data[readcount];
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
if (sizeof(struct intel_package_header) !=
(package_header->header_len * 4)) {
DRM_ERROR("DMC firmware has wrong package header length "
"(%u bytes)\n",
(package_header->header_len * 4));
return NULL;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
readcount += sizeof(struct intel_package_header);
/* Search for dmc_offset to find firware binary. */
for (i = 0; i < package_header->num_entries; i++) {
if (package_header->fw_info[i].substepping == '*' &&
si->stepping == package_header->fw_info[i].stepping) {
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
dmc_offset = package_header->fw_info[i].offset;
break;
} else if (si->stepping == package_header->fw_info[i].stepping &&
si->substepping == package_header->fw_info[i].substepping) {
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
dmc_offset = package_header->fw_info[i].offset;
break;
} else if (package_header->fw_info[i].stepping == '*' &&
package_header->fw_info[i].substepping == '*')
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
dmc_offset = package_header->fw_info[i].offset;
}
if (dmc_offset == CSR_DEFAULT_FW_OFFSET) {
DRM_ERROR("DMC firmware not supported for %c stepping\n",
si->stepping);
return NULL;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
/* Convert dmc_offset into number of bytes. By default it is in dwords*/
dmc_offset *= 4;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
readcount += dmc_offset;
/* Extract dmc_header information. */
dmc_header = (struct intel_dmc_header *)&fw->data[readcount];
if (sizeof(struct intel_dmc_header) != (dmc_header->header_len)) {
DRM_ERROR("DMC firmware has wrong dmc header length "
"(%u bytes)\n",
(dmc_header->header_len));
return NULL;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
readcount += sizeof(struct intel_dmc_header);
/* Cache the dmc header info. */
if (dmc_header->mmio_count > ARRAY_SIZE(csr->mmioaddr)) {
DRM_ERROR("DMC firmware has wrong mmio count %u\n",
dmc_header->mmio_count);
return NULL;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
csr->mmio_count = dmc_header->mmio_count;
for (i = 0; i < dmc_header->mmio_count; i++) {
if (dmc_header->mmioaddr[i] < CSR_MMIO_START_RANGE ||
dmc_header->mmioaddr[i] > CSR_MMIO_END_RANGE) {
DRM_ERROR("DMC firmware has wrong mmio address 0x%x\n",
dmc_header->mmioaddr[i]);
return NULL;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
csr->mmioaddr[i] = _MMIO(dmc_header->mmioaddr[i]);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
csr->mmiodata[i] = dmc_header->mmiodata[i];
}
/* fw_size is in dwords, so multiplied by 4 to convert into bytes. */
nbytes = dmc_header->fw_size * 4;
if (nbytes > csr->max_fw_size) {
DRM_ERROR("DMC FW too big (%u bytes)\n", nbytes);
return NULL;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
csr->dmc_fw_size = dmc_header->fw_size;
dmc_payload = kmalloc(nbytes, GFP_KERNEL);
if (!dmc_payload) {
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
DRM_ERROR("Memory allocation failed for dmc payload\n");
return NULL;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
return memcpy(dmc_payload, &fw->data[readcount], nbytes);
}
static void csr_load_work_fn(struct work_struct *work)
{
struct drm_i915_private *dev_priv;
struct intel_csr *csr;
const struct firmware *fw = NULL;
dev_priv = container_of(work, typeof(*dev_priv), csr.work);
csr = &dev_priv->csr;
request_firmware(&fw, dev_priv->csr.fw_path, &dev_priv->drm.pdev->dev);
if (fw)
dev_priv->csr.dmc_payload = parse_csr_fw(dev_priv, fw);
if (dev_priv->csr.dmc_payload) {
intel_csr_load_program(dev_priv);
intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
drm/i915/skl: Refuse to load outdated dmc firmware There is known issue on GT interrupt delivery with DC6 and firmwares <1.21. There is a suspicion that this causes spurious gpu hangs on driver init and with some workloads, as upgrading the firmware to 1.21 makes these problems disappear. As of now the current version included in distribution firmware packages is very like to be 1.19. Play it safe and refuse to load a firmware version that may affect gpu side stability. With < 1.23 there is a palette and dmc ram corruption issue so blacklist anything below that. v2: Refuse to load fw instead of notifying the user v3: Rebase on header version changes v4: Refuse to load anything less than 1.23 v5: Give enough information for user for finding correct fw (Chris) v6: better url and formatting (Chris) v7: move error log for each fail path (Mika) bail out earlier in load path (Imre) v8: Fix the version check (Imre) Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> References: https://01.org/linuxgraphics/downloads/skldmcver121 References: https://01.org/linuxgraphics/downloads/skylake-dmc-1.23 Testcase: igt/gem_exec_nop Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446220336-32392-1-git-send-email-mika.kuoppala@intel.com Tested-by: Daniel Stone <daniels@collabora.com> # SKL Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2015-10-30 22:52:16 +07:00
DRM_INFO("Finished loading DMC firmware %s (v%u.%u)\n",
drm/i915/skl: Refuse to load outdated dmc firmware There is known issue on GT interrupt delivery with DC6 and firmwares <1.21. There is a suspicion that this causes spurious gpu hangs on driver init and with some workloads, as upgrading the firmware to 1.21 makes these problems disappear. As of now the current version included in distribution firmware packages is very like to be 1.19. Play it safe and refuse to load a firmware version that may affect gpu side stability. With < 1.23 there is a palette and dmc ram corruption issue so blacklist anything below that. v2: Refuse to load fw instead of notifying the user v3: Rebase on header version changes v4: Refuse to load anything less than 1.23 v5: Give enough information for user for finding correct fw (Chris) v6: better url and formatting (Chris) v7: move error log for each fail path (Mika) bail out earlier in load path (Imre) v8: Fix the version check (Imre) Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> References: https://01.org/linuxgraphics/downloads/skldmcver121 References: https://01.org/linuxgraphics/downloads/skylake-dmc-1.23 Testcase: igt/gem_exec_nop Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446220336-32392-1-git-send-email-mika.kuoppala@intel.com Tested-by: Daniel Stone <daniels@collabora.com> # SKL Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2015-10-30 22:52:16 +07:00
dev_priv->csr.fw_path,
CSR_VERSION_MAJOR(csr->version),
CSR_VERSION_MINOR(csr->version));
} else {
dev_notice(dev_priv->drm.dev,
"Failed to load DMC firmware %s."
" Disabling runtime power management.\n",
csr->fw_path);
dev_notice(dev_priv->drm.dev, "DMC firmware homepage: %s",
INTEL_UC_FIRMWARE_URL);
drm/i915/skl: Refuse to load outdated dmc firmware There is known issue on GT interrupt delivery with DC6 and firmwares <1.21. There is a suspicion that this causes spurious gpu hangs on driver init and with some workloads, as upgrading the firmware to 1.21 makes these problems disappear. As of now the current version included in distribution firmware packages is very like to be 1.19. Play it safe and refuse to load a firmware version that may affect gpu side stability. With < 1.23 there is a palette and dmc ram corruption issue so blacklist anything below that. v2: Refuse to load fw instead of notifying the user v3: Rebase on header version changes v4: Refuse to load anything less than 1.23 v5: Give enough information for user for finding correct fw (Chris) v6: better url and formatting (Chris) v7: move error log for each fail path (Mika) bail out earlier in load path (Imre) v8: Fix the version check (Imre) Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> References: https://01.org/linuxgraphics/downloads/skldmcver121 References: https://01.org/linuxgraphics/downloads/skylake-dmc-1.23 Testcase: igt/gem_exec_nop Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446220336-32392-1-git-send-email-mika.kuoppala@intel.com Tested-by: Daniel Stone <daniels@collabora.com> # SKL Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2015-10-30 22:52:16 +07:00
}
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
release_firmware(fw);
}
/**
* intel_csr_ucode_init() - initialize the firmware loading.
* @dev_priv: i915 drm device.
*
* This function is called at the time of loading the display driver to read
* firmware from a .bin file and copied into a internal memory.
*/
void intel_csr_ucode_init(struct drm_i915_private *dev_priv)
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
{
struct intel_csr *csr = &dev_priv->csr;
INIT_WORK(&dev_priv->csr.work, csr_load_work_fn);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
if (!HAS_CSR(dev_priv))
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
return;
/*
* Obtain a runtime pm reference, until CSR is loaded, to avoid entering
* runtime-suspend.
*
* On error, we return with the rpm wakeref held to prevent runtime
* suspend as runtime suspend *requires* a working CSR for whatever
* reason.
*/
intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
if (IS_ICELAKE(dev_priv)) {
csr->fw_path = ICL_CSR_PATH;
csr->required_version = ICL_CSR_VERSION_REQUIRED;
csr->max_fw_size = ICL_CSR_MAX_FW_SIZE;
} else if (IS_CANNONLAKE(dev_priv)) {
csr->fw_path = CNL_CSR_PATH;
csr->required_version = CNL_CSR_VERSION_REQUIRED;
csr->max_fw_size = CNL_CSR_MAX_FW_SIZE;
} else if (IS_GEMINILAKE(dev_priv)) {
csr->fw_path = GLK_CSR_PATH;
csr->required_version = GLK_CSR_VERSION_REQUIRED;
csr->max_fw_size = GLK_CSR_MAX_FW_SIZE;
} else if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) {
csr->fw_path = KBL_CSR_PATH;
csr->required_version = KBL_CSR_VERSION_REQUIRED;
csr->max_fw_size = KBL_CSR_MAX_FW_SIZE;
} else if (IS_SKYLAKE(dev_priv)) {
csr->fw_path = SKL_CSR_PATH;
csr->required_version = SKL_CSR_VERSION_REQUIRED;
csr->max_fw_size = SKL_CSR_MAX_FW_SIZE;
} else if (IS_BROXTON(dev_priv)) {
csr->fw_path = BXT_CSR_PATH;
csr->required_version = BXT_CSR_VERSION_REQUIRED;
csr->max_fw_size = BXT_CSR_MAX_FW_SIZE;
} else {
MISSING_CASE(INTEL_REVID(dev_priv));
return;
}
if (i915_modparams.dmc_firmware_path) {
if (strlen(i915_modparams.dmc_firmware_path) == 0) {
csr->fw_path = NULL;
DRM_INFO("Disabling CSR firmare and runtime PM\n");
return;
}
csr->fw_path = i915_modparams.dmc_firmware_path;
/* Bypass version check for firmware override. */
csr->required_version = 0;
}
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 21:16:16 +07:00
if (csr->fw_path == NULL) {
DRM_DEBUG_KMS("No known CSR firmware for platform, disabling runtime PM\n");
WARN_ON(!IS_ALPHA_SUPPORT(INTEL_INFO(dev_priv)));
return;
}
DRM_DEBUG_KMS("Loading %s\n", csr->fw_path);
schedule_work(&dev_priv->csr.work);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
}
/**
* intel_csr_ucode_suspend() - prepare CSR firmware before system suspend
* @dev_priv: i915 drm device
*
* Prepare the DMC firmware before entering system suspend. This includes
* flushing pending work items and releasing any resources acquired during
* init.
*/
void intel_csr_ucode_suspend(struct drm_i915_private *dev_priv)
{
if (!HAS_CSR(dev_priv))
return;
flush_work(&dev_priv->csr.work);
/* Drop the reference held in case DMC isn't loaded. */
if (!dev_priv->csr.dmc_payload)
intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
}
/**
* intel_csr_ucode_resume() - init CSR firmware during system resume
* @dev_priv: i915 drm device
*
* Reinitialize the DMC firmware during system resume, reacquiring any
* resources released in intel_csr_ucode_suspend().
*/
void intel_csr_ucode_resume(struct drm_i915_private *dev_priv)
{
if (!HAS_CSR(dev_priv))
return;
/*
* Reacquire the reference to keep RPM disabled in case DMC isn't
* loaded.
*/
if (!dev_priv->csr.dmc_payload)
intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
}
/**
* intel_csr_ucode_fini() - unload the CSR firmware.
* @dev_priv: i915 drm device.
*
* Firmmware unloading includes freeing the internal memory and reset the
* firmware loading status.
*/
void intel_csr_ucode_fini(struct drm_i915_private *dev_priv)
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
{
if (!HAS_CSR(dev_priv))
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
return;
intel_csr_ucode_suspend(dev_priv);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 19:58:44 +07:00
kfree(dev_priv->csr.dmc_payload);
}