2018-02-27 18:30:33 +07:00
|
|
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
2016-03-25 01:05:15 +07:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2016 Andreas Färber
|
|
|
|
* Copyright (c) 2016 BayLibre, Inc.
|
|
|
|
* Author: Kevin Hilman <khilman@kernel.org>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "meson-gxbb.dtsi"
|
|
|
|
|
|
|
|
/ {
|
|
|
|
aliases {
|
|
|
|
serial0 = &uart_AO;
|
2018-01-17 17:56:27 +07:00
|
|
|
ethernet0 = ðmac;
|
2016-03-25 01:05:15 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
stdout-path = "serial0:115200n8";
|
|
|
|
};
|
|
|
|
|
|
|
|
memory@0 {
|
|
|
|
device_type = "memory";
|
|
|
|
reg = <0x0 0x0 0x0 0x40000000>;
|
|
|
|
};
|
2016-09-11 20:41:10 +07:00
|
|
|
|
|
|
|
usb_pwr: regulator-usb-pwrs {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
|
|
|
regulator-name = "USB_PWR";
|
|
|
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
|
|
|
/* signal name in schematic: USB_PWR_EN */
|
|
|
|
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
|
|
|
|
enable-active-high;
|
|
|
|
};
|
2016-10-20 18:42:54 +07:00
|
|
|
|
|
|
|
vddio_card: gpio-regulator {
|
|
|
|
compatible = "regulator-gpio";
|
|
|
|
|
|
|
|
regulator-name = "VDDIO_CARD";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
|
|
|
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
|
|
|
|
gpios-states = <1>;
|
|
|
|
|
|
|
|
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
|
arm64: dts: meson: fix boards regulators states format
This fixes the following DT schemas check errors:
meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected)
meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long
meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected)
meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long
meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-23 14:02:48 +07:00
|
|
|
states = <1800000 0>,
|
|
|
|
<3300000 1>;
|
2017-08-01 22:22:24 +07:00
|
|
|
|
|
|
|
regulator-settling-time-up-us = <10000>;
|
|
|
|
regulator-settling-time-down-us = <150000>;
|
2016-10-20 18:42:54 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
vddio_boot: regulator-vddio_boot {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "VDDIO_BOOT";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vddao_3v3: regulator-vddao_3v3 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "VDDAO_3V3";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc_3v3: regulator-vcc_3v3 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "VCC_3V3";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
emmc_pwrseq: emmc-pwrseq {
|
|
|
|
compatible = "mmc-pwrseq-emmc";
|
|
|
|
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
|
|
|
};
|
2016-10-20 18:42:55 +07:00
|
|
|
|
|
|
|
wifi32k: wifi32k {
|
|
|
|
compatible = "pwm-clock";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-frequency = <32768>;
|
|
|
|
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
|
|
|
};
|
2016-10-20 18:42:56 +07:00
|
|
|
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
|
|
compatible = "mmc-pwrseq-simple";
|
|
|
|
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
|
|
|
clocks = <&wifi32k>;
|
|
|
|
clock-names = "ext_clock";
|
|
|
|
};
|
2016-12-01 16:05:58 +07:00
|
|
|
|
2017-05-13 21:33:28 +07:00
|
|
|
cvbs_connector: cvbs-connector {
|
2016-12-01 16:05:58 +07:00
|
|
|
compatible = "composite-video-connector";
|
|
|
|
|
|
|
|
port {
|
|
|
|
cvbs_connector_in: endpoint {
|
|
|
|
remote-endpoint = <&cvbs_vdac_out>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
2017-03-21 22:25:46 +07:00
|
|
|
|
|
|
|
hdmi-connector {
|
|
|
|
compatible = "hdmi-connector";
|
|
|
|
type = "a";
|
|
|
|
|
|
|
|
port {
|
|
|
|
hdmi_connector_in: endpoint {
|
|
|
|
remote-endpoint = <&hdmi_tx_tmds_out>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
2016-03-25 01:05:15 +07:00
|
|
|
};
|
|
|
|
|
2017-08-04 20:12:13 +07:00
|
|
|
&cec_AO {
|
|
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&ao_cec_pins>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
hdmi-phandle = <&hdmi_tx>;
|
|
|
|
};
|
|
|
|
|
2017-05-13 21:33:33 +07:00
|
|
|
&cvbs_vdac_port {
|
|
|
|
cvbs_vdac_out: endpoint {
|
|
|
|
remote-endpoint = <&cvbs_connector_in>;
|
|
|
|
};
|
2016-03-25 01:05:15 +07:00
|
|
|
};
|
2016-04-28 06:58:25 +07:00
|
|
|
|
2017-05-13 21:33:33 +07:00
|
|
|
&hdmi_tx {
|
2016-08-20 16:54:24 +07:00
|
|
|
status = "okay";
|
2017-05-13 21:33:33 +07:00
|
|
|
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
|
2016-08-20 16:54:24 +07:00
|
|
|
pinctrl-names = "default";
|
|
|
|
};
|
2016-09-11 20:41:10 +07:00
|
|
|
|
2017-05-13 21:33:33 +07:00
|
|
|
&hdmi_tx_tmds_port {
|
|
|
|
hdmi_tx_tmds_out: endpoint {
|
|
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
|
|
};
|
2016-09-11 20:41:10 +07:00
|
|
|
};
|
|
|
|
|
2017-05-13 21:33:33 +07:00
|
|
|
&ir {
|
2016-09-11 20:41:10 +07:00
|
|
|
status = "okay";
|
2017-05-13 21:33:33 +07:00
|
|
|
pinctrl-0 = <&remote_input_ao_pins>;
|
|
|
|
pinctrl-names = "default";
|
2016-09-11 20:41:10 +07:00
|
|
|
};
|
|
|
|
|
2017-05-13 21:33:33 +07:00
|
|
|
&pwm_ef {
|
2016-09-11 20:41:10 +07:00
|
|
|
status = "okay";
|
2017-05-13 21:33:33 +07:00
|
|
|
pinctrl-0 = <&pwm_e_pins>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
clocks = <&clkc CLKID_FCLK_DIV4>;
|
|
|
|
clock-names = "clkin0";
|
2016-09-11 20:41:10 +07:00
|
|
|
};
|
2016-10-20 18:42:54 +07:00
|
|
|
|
|
|
|
/* Wireless SDIO Module */
|
|
|
|
&sd_emmc_a {
|
|
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&sdio_pins>;
|
2017-08-31 20:52:20 +07:00
|
|
|
pinctrl-1 = <&sdio_clk_gate_pins>;
|
|
|
|
pinctrl-names = "default", "clk-gate";
|
2016-10-20 18:42:54 +07:00
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
bus-width = <4>;
|
|
|
|
cap-sd-highspeed;
|
2019-04-18 19:27:12 +07:00
|
|
|
max-frequency = <50000000>;
|
2016-10-20 18:42:54 +07:00
|
|
|
|
|
|
|
non-removable;
|
|
|
|
disable-wp;
|
|
|
|
|
2016-10-20 18:42:56 +07:00
|
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
|
|
|
2016-10-20 18:42:54 +07:00
|
|
|
vmmc-supply = <&vddao_3v3>;
|
|
|
|
vqmmc-supply = <&vddio_boot>;
|
2016-10-20 18:42:56 +07:00
|
|
|
|
2017-05-13 21:33:23 +07:00
|
|
|
brcmf: wifi@1 {
|
2016-10-20 18:42:56 +07:00
|
|
|
reg = <1>;
|
|
|
|
compatible = "brcm,bcm4329-fmac";
|
|
|
|
};
|
2016-10-20 18:42:54 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* SD card */
|
|
|
|
&sd_emmc_b {
|
|
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&sdcard_pins>;
|
2017-08-31 20:52:20 +07:00
|
|
|
pinctrl-1 = <&sdcard_clk_gate_pins>;
|
|
|
|
pinctrl-names = "default", "clk-gate";
|
2016-10-20 18:42:54 +07:00
|
|
|
|
|
|
|
bus-width = <4>;
|
|
|
|
cap-sd-highspeed;
|
2017-08-31 20:52:24 +07:00
|
|
|
sd-uhs-sdr12;
|
|
|
|
sd-uhs-sdr25;
|
|
|
|
sd-uhs-sdr50;
|
2016-10-20 18:42:54 +07:00
|
|
|
max-frequency = <100000000>;
|
|
|
|
disable-wp;
|
|
|
|
|
2019-01-14 21:44:21 +07:00
|
|
|
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
2016-10-20 18:42:54 +07:00
|
|
|
|
|
|
|
vmmc-supply = <&vddao_3v3>;
|
|
|
|
vqmmc-supply = <&vddio_card>;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* eMMC */
|
|
|
|
&sd_emmc_c {
|
|
|
|
status = "okay";
|
2017-10-03 22:24:42 +07:00
|
|
|
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
2017-08-31 20:52:20 +07:00
|
|
|
pinctrl-1 = <&emmc_clk_gate_pins>;
|
|
|
|
pinctrl-names = "default", "clk-gate";
|
2016-10-20 18:42:54 +07:00
|
|
|
|
|
|
|
bus-width = <8>;
|
|
|
|
cap-mmc-highspeed;
|
|
|
|
max-frequency = <200000000>;
|
|
|
|
non-removable;
|
|
|
|
disable-wp;
|
|
|
|
mmc-ddr-1_8v;
|
|
|
|
mmc-hs200-1_8v;
|
|
|
|
|
|
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
|
|
vmmc-supply = <&vcc_3v3>;
|
|
|
|
vqmmc-supply = <&vddio_boot>;
|
|
|
|
};
|
2016-10-20 18:42:55 +07:00
|
|
|
|
2017-05-13 21:33:33 +07:00
|
|
|
/* This UART is brought out to the DB9 connector */
|
|
|
|
&uart_AO {
|
2016-10-20 18:42:55 +07:00
|
|
|
status = "okay";
|
2017-05-13 21:33:33 +07:00
|
|
|
pinctrl-0 = <&uart_ao_a_pins>;
|
2016-10-20 18:42:55 +07:00
|
|
|
pinctrl-names = "default";
|
|
|
|
};
|
2016-12-01 16:05:58 +07:00
|
|
|
|
2017-05-13 21:33:33 +07:00
|
|
|
&usb0_phy {
|
|
|
|
status = "okay";
|
|
|
|
phy-supply = <&usb_pwr>;
|
2016-12-01 16:05:58 +07:00
|
|
|
};
|
2017-03-21 22:25:46 +07:00
|
|
|
|
2017-05-13 21:33:33 +07:00
|
|
|
&usb1_phy {
|
2017-03-21 22:25:46 +07:00
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2017-05-13 21:33:33 +07:00
|
|
|
&usb0 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb1 {
|
|
|
|
status = "okay";
|
2017-03-21 22:25:46 +07:00
|
|
|
};
|