linux_dsm_epyc7002/drivers/nvme/target/fc.c

2602 lines
68 KiB
C
Raw Normal View History

/*
* Copyright (c) 2016 Avago Technologies. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful.
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
* INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO
* THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
* See the GNU General Public License for more details, a copy of which
* can be found in the file COPYING included with this package
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/blk-mq.h>
#include <linux/parser.h>
#include <linux/random.h>
#include <uapi/scsi/fc/fc_fs.h>
#include <uapi/scsi/fc/fc_els.h>
#include "nvmet.h"
#include <linux/nvme-fc-driver.h>
#include <linux/nvme-fc.h>
/* *************************** Data Structures/Defines ****************** */
#define NVMET_LS_CTX_COUNT 4
/* for this implementation, assume small single frame rqst/rsp */
#define NVME_FC_MAX_LS_BUFFER_SIZE 2048
struct nvmet_fc_tgtport;
struct nvmet_fc_tgt_assoc;
struct nvmet_fc_ls_iod {
struct nvmefc_tgt_ls_req *lsreq;
struct nvmefc_tgt_fcp_req *fcpreq; /* only if RS */
struct list_head ls_list; /* tgtport->ls_list */
struct nvmet_fc_tgtport *tgtport;
struct nvmet_fc_tgt_assoc *assoc;
u8 *rqstbuf;
u8 *rspbuf;
u16 rqstdatalen;
dma_addr_t rspdma;
struct scatterlist sg[2];
struct work_struct work;
} __aligned(sizeof(unsigned long long));
#define NVMET_FC_MAX_KB_PER_XFR 256
enum nvmet_fcp_datadir {
NVMET_FCP_NODATA,
NVMET_FCP_WRITE,
NVMET_FCP_READ,
NVMET_FCP_ABORTED,
};
struct nvmet_fc_fcp_iod {
struct nvmefc_tgt_fcp_req *fcpreq;
struct nvme_fc_cmd_iu cmdiubuf;
struct nvme_fc_ersp_iu rspiubuf;
dma_addr_t rspdma;
struct scatterlist *data_sg;
struct scatterlist *next_sg;
int data_sg_cnt;
u32 next_sg_offset;
u32 total_length;
u32 offset;
enum nvmet_fcp_datadir io_dir;
bool active;
bool abort;
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
bool aborted;
bool writedataactive;
spinlock_t flock;
struct nvmet_req req;
struct work_struct work;
struct work_struct done_work;
struct nvmet_fc_tgtport *tgtport;
struct nvmet_fc_tgt_queue *queue;
struct list_head fcp_list; /* tgtport->fcp_list */
};
struct nvmet_fc_tgtport {
struct nvmet_fc_target_port fc_target_port;
struct list_head tgt_list; /* nvmet_fc_target_list */
struct device *dev; /* dev for dma mapping */
struct nvmet_fc_target_template *ops;
struct nvmet_fc_ls_iod *iod;
spinlock_t lock;
struct list_head ls_list;
struct list_head ls_busylist;
struct list_head assoc_list;
struct ida assoc_cnt;
struct nvmet_port *port;
struct kref ref;
};
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
struct nvmet_fc_defer_fcp_req {
struct list_head req_list;
struct nvmefc_tgt_fcp_req *fcp_req;
};
struct nvmet_fc_tgt_queue {
bool ninetypercent;
u16 qid;
u16 sqsize;
u16 ersp_ratio;
__le16 sqhd;
int cpu;
atomic_t connected;
atomic_t sqtail;
atomic_t zrspcnt;
atomic_t rsn;
spinlock_t qlock;
struct nvmet_port *port;
struct nvmet_cq nvme_cq;
struct nvmet_sq nvme_sq;
struct nvmet_fc_tgt_assoc *assoc;
struct nvmet_fc_fcp_iod *fod; /* array of fcp_iods */
struct list_head fod_list;
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
struct list_head pending_cmd_list;
struct list_head avail_defer_list;
struct workqueue_struct *work_q;
struct kref ref;
} __aligned(sizeof(unsigned long long));
struct nvmet_fc_tgt_assoc {
u64 association_id;
u32 a_id;
struct nvmet_fc_tgtport *tgtport;
struct list_head a_list;
struct nvmet_fc_tgt_queue *queues[NVMET_NR_QUEUES];
struct kref ref;
};
static inline int
nvmet_fc_iodnum(struct nvmet_fc_ls_iod *iodptr)
{
return (iodptr - iodptr->tgtport->iod);
}
static inline int
nvmet_fc_fodnum(struct nvmet_fc_fcp_iod *fodptr)
{
return (fodptr - fodptr->queue->fod);
}
/*
* Association and Connection IDs:
*
* Association ID will have random number in upper 6 bytes and zero
* in lower 2 bytes
*
* Connection IDs will be Association ID with QID or'd in lower 2 bytes
*
* note: Association ID = Connection ID for queue 0
*/
#define BYTES_FOR_QID sizeof(u16)
#define BYTES_FOR_QID_SHIFT (BYTES_FOR_QID * 8)
#define NVMET_FC_QUEUEID_MASK ((u64)((1 << BYTES_FOR_QID_SHIFT) - 1))
static inline u64
nvmet_fc_makeconnid(struct nvmet_fc_tgt_assoc *assoc, u16 qid)
{
return (assoc->association_id | qid);
}
static inline u64
nvmet_fc_getassociationid(u64 connectionid)
{
return connectionid & ~NVMET_FC_QUEUEID_MASK;
}
static inline u16
nvmet_fc_getqueueid(u64 connectionid)
{
return (u16)(connectionid & NVMET_FC_QUEUEID_MASK);
}
static inline struct nvmet_fc_tgtport *
targetport_to_tgtport(struct nvmet_fc_target_port *targetport)
{
return container_of(targetport, struct nvmet_fc_tgtport,
fc_target_port);
}
static inline struct nvmet_fc_fcp_iod *
nvmet_req_to_fod(struct nvmet_req *nvme_req)
{
return container_of(nvme_req, struct nvmet_fc_fcp_iod, req);
}
/* *************************** Globals **************************** */
static DEFINE_SPINLOCK(nvmet_fc_tgtlock);
static LIST_HEAD(nvmet_fc_target_list);
static DEFINE_IDA(nvmet_fc_tgtport_cnt);
static void nvmet_fc_handle_ls_rqst_work(struct work_struct *work);
static void nvmet_fc_handle_fcp_rqst_work(struct work_struct *work);
static void nvmet_fc_fcp_rqst_op_done_work(struct work_struct *work);
static void nvmet_fc_tgt_a_put(struct nvmet_fc_tgt_assoc *assoc);
static int nvmet_fc_tgt_a_get(struct nvmet_fc_tgt_assoc *assoc);
static void nvmet_fc_tgt_q_put(struct nvmet_fc_tgt_queue *queue);
static int nvmet_fc_tgt_q_get(struct nvmet_fc_tgt_queue *queue);
static void nvmet_fc_tgtport_put(struct nvmet_fc_tgtport *tgtport);
static int nvmet_fc_tgtport_get(struct nvmet_fc_tgtport *tgtport);
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
static void nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_fcp_iod *fod);
/* *********************** FC-NVME DMA Handling **************************** */
/*
* The fcloop device passes in a NULL device pointer. Real LLD's will
* pass in a valid device pointer. If NULL is passed to the dma mapping
* routines, depending on the platform, it may or may not succeed, and
* may crash.
*
* As such:
* Wrapper all the dma routines and check the dev pointer.
*
* If simple mappings (return just a dma address, we'll noop them,
* returning a dma address of 0.
*
* On more complex mappings (dma_map_sg), a pseudo routine fills
* in the scatter list, setting all dma addresses to 0.
*/
static inline dma_addr_t
fc_dma_map_single(struct device *dev, void *ptr, size_t size,
enum dma_data_direction dir)
{
return dev ? dma_map_single(dev, ptr, size, dir) : (dma_addr_t)0L;
}
static inline int
fc_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return dev ? dma_mapping_error(dev, dma_addr) : 0;
}
static inline void
fc_dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size,
enum dma_data_direction dir)
{
if (dev)
dma_unmap_single(dev, addr, size, dir);
}
static inline void
fc_dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size,
enum dma_data_direction dir)
{
if (dev)
dma_sync_single_for_cpu(dev, addr, size, dir);
}
static inline void
fc_dma_sync_single_for_device(struct device *dev, dma_addr_t addr, size_t size,
enum dma_data_direction dir)
{
if (dev)
dma_sync_single_for_device(dev, addr, size, dir);
}
/* pseudo dma_map_sg call */
static int
fc_map_sg(struct scatterlist *sg, int nents)
{
struct scatterlist *s;
int i;
WARN_ON(nents == 0 || sg[0].length == 0);
for_each_sg(sg, s, nents, i) {
s->dma_address = 0L;
#ifdef CONFIG_NEED_SG_DMA_LENGTH
s->dma_length = s->length;
#endif
}
return nents;
}
static inline int
fc_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{
return dev ? dma_map_sg(dev, sg, nents, dir) : fc_map_sg(sg, nents);
}
static inline void
fc_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{
if (dev)
dma_unmap_sg(dev, sg, nents, dir);
}
/* *********************** FC-NVME Port Management ************************ */
static int
nvmet_fc_alloc_ls_iodlist(struct nvmet_fc_tgtport *tgtport)
{
struct nvmet_fc_ls_iod *iod;
int i;
iod = kcalloc(NVMET_LS_CTX_COUNT, sizeof(struct nvmet_fc_ls_iod),
GFP_KERNEL);
if (!iod)
return -ENOMEM;
tgtport->iod = iod;
for (i = 0; i < NVMET_LS_CTX_COUNT; iod++, i++) {
INIT_WORK(&iod->work, nvmet_fc_handle_ls_rqst_work);
iod->tgtport = tgtport;
list_add_tail(&iod->ls_list, &tgtport->ls_list);
iod->rqstbuf = kcalloc(2, NVME_FC_MAX_LS_BUFFER_SIZE,
GFP_KERNEL);
if (!iod->rqstbuf)
goto out_fail;
iod->rspbuf = iod->rqstbuf + NVME_FC_MAX_LS_BUFFER_SIZE;
iod->rspdma = fc_dma_map_single(tgtport->dev, iod->rspbuf,
NVME_FC_MAX_LS_BUFFER_SIZE,
DMA_TO_DEVICE);
if (fc_dma_mapping_error(tgtport->dev, iod->rspdma))
goto out_fail;
}
return 0;
out_fail:
kfree(iod->rqstbuf);
list_del(&iod->ls_list);
for (iod--, i--; i >= 0; iod--, i--) {
fc_dma_unmap_single(tgtport->dev, iod->rspdma,
NVME_FC_MAX_LS_BUFFER_SIZE, DMA_TO_DEVICE);
kfree(iod->rqstbuf);
list_del(&iod->ls_list);
}
kfree(iod);
return -EFAULT;
}
static void
nvmet_fc_free_ls_iodlist(struct nvmet_fc_tgtport *tgtport)
{
struct nvmet_fc_ls_iod *iod = tgtport->iod;
int i;
for (i = 0; i < NVMET_LS_CTX_COUNT; iod++, i++) {
fc_dma_unmap_single(tgtport->dev,
iod->rspdma, NVME_FC_MAX_LS_BUFFER_SIZE,
DMA_TO_DEVICE);
kfree(iod->rqstbuf);
list_del(&iod->ls_list);
}
kfree(tgtport->iod);
}
static struct nvmet_fc_ls_iod *
nvmet_fc_alloc_ls_iod(struct nvmet_fc_tgtport *tgtport)
{
static struct nvmet_fc_ls_iod *iod;
unsigned long flags;
spin_lock_irqsave(&tgtport->lock, flags);
iod = list_first_entry_or_null(&tgtport->ls_list,
struct nvmet_fc_ls_iod, ls_list);
if (iod)
list_move_tail(&iod->ls_list, &tgtport->ls_busylist);
spin_unlock_irqrestore(&tgtport->lock, flags);
return iod;
}
static void
nvmet_fc_free_ls_iod(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_ls_iod *iod)
{
unsigned long flags;
spin_lock_irqsave(&tgtport->lock, flags);
list_move(&iod->ls_list, &tgtport->ls_list);
spin_unlock_irqrestore(&tgtport->lock, flags);
}
static void
nvmet_fc_prep_fcp_iodlist(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_tgt_queue *queue)
{
struct nvmet_fc_fcp_iod *fod = queue->fod;
int i;
for (i = 0; i < queue->sqsize; fod++, i++) {
INIT_WORK(&fod->work, nvmet_fc_handle_fcp_rqst_work);
INIT_WORK(&fod->done_work, nvmet_fc_fcp_rqst_op_done_work);
fod->tgtport = tgtport;
fod->queue = queue;
fod->active = false;
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
fod->abort = false;
fod->aborted = false;
fod->fcpreq = NULL;
list_add_tail(&fod->fcp_list, &queue->fod_list);
spin_lock_init(&fod->flock);
fod->rspdma = fc_dma_map_single(tgtport->dev, &fod->rspiubuf,
sizeof(fod->rspiubuf), DMA_TO_DEVICE);
if (fc_dma_mapping_error(tgtport->dev, fod->rspdma)) {
list_del(&fod->fcp_list);
for (fod--, i--; i >= 0; fod--, i--) {
fc_dma_unmap_single(tgtport->dev, fod->rspdma,
sizeof(fod->rspiubuf),
DMA_TO_DEVICE);
fod->rspdma = 0L;
list_del(&fod->fcp_list);
}
return;
}
}
}
static void
nvmet_fc_destroy_fcp_iodlist(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_tgt_queue *queue)
{
struct nvmet_fc_fcp_iod *fod = queue->fod;
int i;
for (i = 0; i < queue->sqsize; fod++, i++) {
if (fod->rspdma)
fc_dma_unmap_single(tgtport->dev, fod->rspdma,
sizeof(fod->rspiubuf), DMA_TO_DEVICE);
}
}
static struct nvmet_fc_fcp_iod *
nvmet_fc_alloc_fcp_iod(struct nvmet_fc_tgt_queue *queue)
{
static struct nvmet_fc_fcp_iod *fod;
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
lockdep_assert_held(&queue->qlock);
fod = list_first_entry_or_null(&queue->fod_list,
struct nvmet_fc_fcp_iod, fcp_list);
if (fod) {
list_del(&fod->fcp_list);
fod->active = true;
/*
* no queue reference is taken, as it was taken by the
* queue lookup just prior to the allocation. The iod
* will "inherit" that reference.
*/
}
return fod;
}
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
static void
nvmet_fc_queue_fcp_req(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_tgt_queue *queue,
struct nvmefc_tgt_fcp_req *fcpreq)
{
struct nvmet_fc_fcp_iod *fod = fcpreq->nvmet_fc_private;
/*
* put all admin cmds on hw queue id 0. All io commands go to
* the respective hw queue based on a modulo basis
*/
fcpreq->hwqid = queue->qid ?
((queue->qid - 1) % tgtport->ops->max_hw_queues) : 0;
if (tgtport->ops->target_features & NVMET_FCTGTFEAT_CMD_IN_ISR)
queue_work_on(queue->cpu, queue->work_q, &fod->work);
else
nvmet_fc_handle_fcp_rqst(tgtport, fod);
}
static void
nvmet_fc_free_fcp_iod(struct nvmet_fc_tgt_queue *queue,
struct nvmet_fc_fcp_iod *fod)
{
struct nvmefc_tgt_fcp_req *fcpreq = fod->fcpreq;
struct nvmet_fc_tgtport *tgtport = fod->tgtport;
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
struct nvmet_fc_defer_fcp_req *deferfcp;
unsigned long flags;
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
fc_dma_sync_single_for_cpu(tgtport->dev, fod->rspdma,
sizeof(fod->rspiubuf), DMA_TO_DEVICE);
fcpreq->nvmet_fc_private = NULL;
fod->active = false;
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
fod->abort = false;
fod->aborted = false;
fod->writedataactive = false;
fod->fcpreq = NULL;
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
tgtport->ops->fcp_req_release(&tgtport->fc_target_port, fcpreq);
spin_lock_irqsave(&queue->qlock, flags);
deferfcp = list_first_entry_or_null(&queue->pending_cmd_list,
struct nvmet_fc_defer_fcp_req, req_list);
if (!deferfcp) {
list_add_tail(&fod->fcp_list, &fod->queue->fod_list);
spin_unlock_irqrestore(&queue->qlock, flags);
/* Release reference taken at queue lookup and fod allocation */
nvmet_fc_tgt_q_put(queue);
return;
}
/* Re-use the fod for the next pending cmd that was deferred */
list_del(&deferfcp->req_list);
fcpreq = deferfcp->fcp_req;
/* deferfcp can be reused for another IO at a later date */
list_add_tail(&deferfcp->req_list, &queue->avail_defer_list);
spin_unlock_irqrestore(&queue->qlock, flags);
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
/* Save NVME CMD IO in fod */
memcpy(&fod->cmdiubuf, fcpreq->rspaddr, fcpreq->rsplen);
/* Setup new fcpreq to be processed */
fcpreq->rspaddr = NULL;
fcpreq->rsplen = 0;
fcpreq->nvmet_fc_private = fod;
fod->fcpreq = fcpreq;
fod->active = true;
/* inform LLDD IO is now being processed */
tgtport->ops->defer_rcv(&tgtport->fc_target_port, fcpreq);
/* Submit deferred IO for processing */
nvmet_fc_queue_fcp_req(tgtport, queue, fcpreq);
/*
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
* Leave the queue lookup get reference taken when
* fod was originally allocated.
*/
}
static int
nvmet_fc_queue_to_cpu(struct nvmet_fc_tgtport *tgtport, int qid)
{
int cpu, idx, cnt;
if (tgtport->ops->max_hw_queues == 1)
return WORK_CPU_UNBOUND;
/* Simple cpu selection based on qid modulo active cpu count */
idx = !qid ? 0 : (qid - 1) % num_active_cpus();
/* find the n'th active cpu */
for (cpu = 0, cnt = 0; ; ) {
if (cpu_active(cpu)) {
if (cnt == idx)
break;
cnt++;
}
cpu = (cpu + 1) % num_possible_cpus();
}
return cpu;
}
static struct nvmet_fc_tgt_queue *
nvmet_fc_alloc_target_queue(struct nvmet_fc_tgt_assoc *assoc,
u16 qid, u16 sqsize)
{
struct nvmet_fc_tgt_queue *queue;
unsigned long flags;
int ret;
if (qid >= NVMET_NR_QUEUES)
return NULL;
queue = kzalloc((sizeof(*queue) +
(sizeof(struct nvmet_fc_fcp_iod) * sqsize)),
GFP_KERNEL);
if (!queue)
return NULL;
if (!nvmet_fc_tgt_a_get(assoc))
goto out_free_queue;
queue->work_q = alloc_workqueue("ntfc%d.%d.%d", 0, 0,
assoc->tgtport->fc_target_port.port_num,
assoc->a_id, qid);
if (!queue->work_q)
goto out_a_put;
queue->fod = (struct nvmet_fc_fcp_iod *)&queue[1];
queue->qid = qid;
queue->sqsize = sqsize;
queue->assoc = assoc;
queue->port = assoc->tgtport->port;
queue->cpu = nvmet_fc_queue_to_cpu(assoc->tgtport, qid);
INIT_LIST_HEAD(&queue->fod_list);
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
INIT_LIST_HEAD(&queue->avail_defer_list);
INIT_LIST_HEAD(&queue->pending_cmd_list);
atomic_set(&queue->connected, 0);
atomic_set(&queue->sqtail, 0);
atomic_set(&queue->rsn, 1);
atomic_set(&queue->zrspcnt, 0);
spin_lock_init(&queue->qlock);
kref_init(&queue->ref);
nvmet_fc_prep_fcp_iodlist(assoc->tgtport, queue);
ret = nvmet_sq_init(&queue->nvme_sq);
if (ret)
goto out_fail_iodlist;
WARN_ON(assoc->queues[qid]);
spin_lock_irqsave(&assoc->tgtport->lock, flags);
assoc->queues[qid] = queue;
spin_unlock_irqrestore(&assoc->tgtport->lock, flags);
return queue;
out_fail_iodlist:
nvmet_fc_destroy_fcp_iodlist(assoc->tgtport, queue);
destroy_workqueue(queue->work_q);
out_a_put:
nvmet_fc_tgt_a_put(assoc);
out_free_queue:
kfree(queue);
return NULL;
}
static void
nvmet_fc_tgt_queue_free(struct kref *ref)
{
struct nvmet_fc_tgt_queue *queue =
container_of(ref, struct nvmet_fc_tgt_queue, ref);
unsigned long flags;
spin_lock_irqsave(&queue->assoc->tgtport->lock, flags);
queue->assoc->queues[queue->qid] = NULL;
spin_unlock_irqrestore(&queue->assoc->tgtport->lock, flags);
nvmet_fc_destroy_fcp_iodlist(queue->assoc->tgtport, queue);
nvmet_fc_tgt_a_put(queue->assoc);
destroy_workqueue(queue->work_q);
kfree(queue);
}
static void
nvmet_fc_tgt_q_put(struct nvmet_fc_tgt_queue *queue)
{
kref_put(&queue->ref, nvmet_fc_tgt_queue_free);
}
static int
nvmet_fc_tgt_q_get(struct nvmet_fc_tgt_queue *queue)
{
return kref_get_unless_zero(&queue->ref);
}
static void
nvmet_fc_delete_target_queue(struct nvmet_fc_tgt_queue *queue)
{
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
struct nvmet_fc_tgtport *tgtport = queue->assoc->tgtport;
struct nvmet_fc_fcp_iod *fod = queue->fod;
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
struct nvmet_fc_defer_fcp_req *deferfcp;
unsigned long flags;
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
int i, writedataactive;
bool disconnect;
disconnect = atomic_xchg(&queue->connected, 0);
spin_lock_irqsave(&queue->qlock, flags);
/* about outstanding io's */
for (i = 0; i < queue->sqsize; fod++, i++) {
if (fod->active) {
spin_lock(&fod->flock);
fod->abort = true;
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
writedataactive = fod->writedataactive;
spin_unlock(&fod->flock);
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
/*
* only call lldd abort routine if waiting for
* writedata. other outstanding ops should finish
* on their own.
*/
if (writedataactive) {
spin_lock(&fod->flock);
fod->aborted = true;
spin_unlock(&fod->flock);
tgtport->ops->fcp_abort(
&tgtport->fc_target_port, fod->fcpreq);
}
}
}
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
/* Cleanup defer'ed IOs in queue */
list_for_each_entry(deferfcp, &queue->avail_defer_list, req_list) {
list_del(&deferfcp->req_list);
kfree(deferfcp);
}
for (;;) {
deferfcp = list_first_entry_or_null(&queue->pending_cmd_list,
struct nvmet_fc_defer_fcp_req, req_list);
if (!deferfcp)
break;
list_del(&deferfcp->req_list);
spin_unlock_irqrestore(&queue->qlock, flags);
tgtport->ops->defer_rcv(&tgtport->fc_target_port,
deferfcp->fcp_req);
tgtport->ops->fcp_abort(&tgtport->fc_target_port,
deferfcp->fcp_req);
tgtport->ops->fcp_req_release(&tgtport->fc_target_port,
deferfcp->fcp_req);
kfree(deferfcp);
spin_lock_irqsave(&queue->qlock, flags);
}
spin_unlock_irqrestore(&queue->qlock, flags);
flush_workqueue(queue->work_q);
if (disconnect)
nvmet_sq_destroy(&queue->nvme_sq);
nvmet_fc_tgt_q_put(queue);
}
static struct nvmet_fc_tgt_queue *
nvmet_fc_find_target_queue(struct nvmet_fc_tgtport *tgtport,
u64 connection_id)
{
struct nvmet_fc_tgt_assoc *assoc;
struct nvmet_fc_tgt_queue *queue;
u64 association_id = nvmet_fc_getassociationid(connection_id);
u16 qid = nvmet_fc_getqueueid(connection_id);
unsigned long flags;
spin_lock_irqsave(&tgtport->lock, flags);
list_for_each_entry(assoc, &tgtport->assoc_list, a_list) {
if (association_id == assoc->association_id) {
queue = assoc->queues[qid];
if (queue &&
(!atomic_read(&queue->connected) ||
!nvmet_fc_tgt_q_get(queue)))
queue = NULL;
spin_unlock_irqrestore(&tgtport->lock, flags);
return queue;
}
}
spin_unlock_irqrestore(&tgtport->lock, flags);
return NULL;
}
static struct nvmet_fc_tgt_assoc *
nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport)
{
struct nvmet_fc_tgt_assoc *assoc, *tmpassoc;
unsigned long flags;
u64 ran;
int idx;
bool needrandom = true;
assoc = kzalloc(sizeof(*assoc), GFP_KERNEL);
if (!assoc)
return NULL;
idx = ida_simple_get(&tgtport->assoc_cnt, 0, 0, GFP_KERNEL);
if (idx < 0)
goto out_free_assoc;
if (!nvmet_fc_tgtport_get(tgtport))
goto out_ida_put;
assoc->tgtport = tgtport;
assoc->a_id = idx;
INIT_LIST_HEAD(&assoc->a_list);
kref_init(&assoc->ref);
while (needrandom) {
get_random_bytes(&ran, sizeof(ran) - BYTES_FOR_QID);
ran = ran << BYTES_FOR_QID_SHIFT;
spin_lock_irqsave(&tgtport->lock, flags);
needrandom = false;
list_for_each_entry(tmpassoc, &tgtport->assoc_list, a_list)
if (ran == tmpassoc->association_id) {
needrandom = true;
break;
}
if (!needrandom) {
assoc->association_id = ran;
list_add_tail(&assoc->a_list, &tgtport->assoc_list);
}
spin_unlock_irqrestore(&tgtport->lock, flags);
}
return assoc;
out_ida_put:
ida_simple_remove(&tgtport->assoc_cnt, idx);
out_free_assoc:
kfree(assoc);
return NULL;
}
static void
nvmet_fc_target_assoc_free(struct kref *ref)
{
struct nvmet_fc_tgt_assoc *assoc =
container_of(ref, struct nvmet_fc_tgt_assoc, ref);
struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
unsigned long flags;
spin_lock_irqsave(&tgtport->lock, flags);
list_del(&assoc->a_list);
spin_unlock_irqrestore(&tgtport->lock, flags);
ida_simple_remove(&tgtport->assoc_cnt, assoc->a_id);
kfree(assoc);
nvmet_fc_tgtport_put(tgtport);
}
static void
nvmet_fc_tgt_a_put(struct nvmet_fc_tgt_assoc *assoc)
{
kref_put(&assoc->ref, nvmet_fc_target_assoc_free);
}
static int
nvmet_fc_tgt_a_get(struct nvmet_fc_tgt_assoc *assoc)
{
return kref_get_unless_zero(&assoc->ref);
}
static void
nvmet_fc_delete_target_assoc(struct nvmet_fc_tgt_assoc *assoc)
{
struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
struct nvmet_fc_tgt_queue *queue;
unsigned long flags;
int i;
spin_lock_irqsave(&tgtport->lock, flags);
for (i = NVMET_NR_QUEUES - 1; i >= 0; i--) {
queue = assoc->queues[i];
if (queue) {
if (!nvmet_fc_tgt_q_get(queue))
continue;
spin_unlock_irqrestore(&tgtport->lock, flags);
nvmet_fc_delete_target_queue(queue);
nvmet_fc_tgt_q_put(queue);
spin_lock_irqsave(&tgtport->lock, flags);
}
}
spin_unlock_irqrestore(&tgtport->lock, flags);
nvmet_fc_tgt_a_put(assoc);
}
static struct nvmet_fc_tgt_assoc *
nvmet_fc_find_target_assoc(struct nvmet_fc_tgtport *tgtport,
u64 association_id)
{
struct nvmet_fc_tgt_assoc *assoc;
struct nvmet_fc_tgt_assoc *ret = NULL;
unsigned long flags;
spin_lock_irqsave(&tgtport->lock, flags);
list_for_each_entry(assoc, &tgtport->assoc_list, a_list) {
if (association_id == assoc->association_id) {
ret = assoc;
nvmet_fc_tgt_a_get(assoc);
break;
}
}
spin_unlock_irqrestore(&tgtport->lock, flags);
return ret;
}
/**
* nvme_fc_register_targetport - transport entry point called by an
* LLDD to register the existence of a local
* NVME subystem FC port.
* @pinfo: pointer to information about the port to be registered
* @template: LLDD entrypoints and operational parameters for the port
* @dev: physical hardware device node port corresponds to. Will be
* used for DMA mappings
* @portptr: pointer to a local port pointer. Upon success, the routine
* will allocate a nvme_fc_local_port structure and place its
* address in the local port pointer. Upon failure, local port
* pointer will be set to NULL.
*
* Returns:
* a completion status. Must be 0 upon success; a negative errno
* (ex: -ENXIO) upon failure.
*/
int
nvmet_fc_register_targetport(struct nvmet_fc_port_info *pinfo,
struct nvmet_fc_target_template *template,
struct device *dev,
struct nvmet_fc_target_port **portptr)
{
struct nvmet_fc_tgtport *newrec;
unsigned long flags;
int ret, idx;
if (!template->xmt_ls_rsp || !template->fcp_op ||
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
!template->fcp_abort ||
!template->fcp_req_release || !template->targetport_delete ||
!template->max_hw_queues || !template->max_sgl_segments ||
!template->max_dif_sgl_segments || !template->dma_boundary) {
ret = -EINVAL;
goto out_regtgt_failed;
}
newrec = kzalloc((sizeof(*newrec) + template->target_priv_sz),
GFP_KERNEL);
if (!newrec) {
ret = -ENOMEM;
goto out_regtgt_failed;
}
idx = ida_simple_get(&nvmet_fc_tgtport_cnt, 0, 0, GFP_KERNEL);
if (idx < 0) {
ret = -ENOSPC;
goto out_fail_kfree;
}
if (!get_device(dev) && dev) {
ret = -ENODEV;
goto out_ida_put;
}
newrec->fc_target_port.node_name = pinfo->node_name;
newrec->fc_target_port.port_name = pinfo->port_name;
newrec->fc_target_port.private = &newrec[1];
newrec->fc_target_port.port_id = pinfo->port_id;
newrec->fc_target_port.port_num = idx;
INIT_LIST_HEAD(&newrec->tgt_list);
newrec->dev = dev;
newrec->ops = template;
spin_lock_init(&newrec->lock);
INIT_LIST_HEAD(&newrec->ls_list);
INIT_LIST_HEAD(&newrec->ls_busylist);
INIT_LIST_HEAD(&newrec->assoc_list);
kref_init(&newrec->ref);
ida_init(&newrec->assoc_cnt);
ret = nvmet_fc_alloc_ls_iodlist(newrec);
if (ret) {
ret = -ENOMEM;
goto out_free_newrec;
}
spin_lock_irqsave(&nvmet_fc_tgtlock, flags);
list_add_tail(&newrec->tgt_list, &nvmet_fc_target_list);
spin_unlock_irqrestore(&nvmet_fc_tgtlock, flags);
*portptr = &newrec->fc_target_port;
return 0;
out_free_newrec:
put_device(dev);
out_ida_put:
ida_simple_remove(&nvmet_fc_tgtport_cnt, idx);
out_fail_kfree:
kfree(newrec);
out_regtgt_failed:
*portptr = NULL;
return ret;
}
EXPORT_SYMBOL_GPL(nvmet_fc_register_targetport);
static void
nvmet_fc_free_tgtport(struct kref *ref)
{
struct nvmet_fc_tgtport *tgtport =
container_of(ref, struct nvmet_fc_tgtport, ref);
struct device *dev = tgtport->dev;
unsigned long flags;
spin_lock_irqsave(&nvmet_fc_tgtlock, flags);
list_del(&tgtport->tgt_list);
spin_unlock_irqrestore(&nvmet_fc_tgtlock, flags);
nvmet_fc_free_ls_iodlist(tgtport);
/* let the LLDD know we've finished tearing it down */
tgtport->ops->targetport_delete(&tgtport->fc_target_port);
ida_simple_remove(&nvmet_fc_tgtport_cnt,
tgtport->fc_target_port.port_num);
ida_destroy(&tgtport->assoc_cnt);
kfree(tgtport);
put_device(dev);
}
static void
nvmet_fc_tgtport_put(struct nvmet_fc_tgtport *tgtport)
{
kref_put(&tgtport->ref, nvmet_fc_free_tgtport);
}
static int
nvmet_fc_tgtport_get(struct nvmet_fc_tgtport *tgtport)
{
return kref_get_unless_zero(&tgtport->ref);
}
static void
__nvmet_fc_free_assocs(struct nvmet_fc_tgtport *tgtport)
{
struct nvmet_fc_tgt_assoc *assoc, *next;
unsigned long flags;
spin_lock_irqsave(&tgtport->lock, flags);
list_for_each_entry_safe(assoc, next,
&tgtport->assoc_list, a_list) {
if (!nvmet_fc_tgt_a_get(assoc))
continue;
spin_unlock_irqrestore(&tgtport->lock, flags);
nvmet_fc_delete_target_assoc(assoc);
nvmet_fc_tgt_a_put(assoc);
spin_lock_irqsave(&tgtport->lock, flags);
}
spin_unlock_irqrestore(&tgtport->lock, flags);
}
/*
* nvmet layer has called to terminate an association
*/
static void
nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl)
{
struct nvmet_fc_tgtport *tgtport, *next;
struct nvmet_fc_tgt_assoc *assoc;
struct nvmet_fc_tgt_queue *queue;
unsigned long flags;
bool found_ctrl = false;
/* this is a bit ugly, but don't want to make locks layered */
spin_lock_irqsave(&nvmet_fc_tgtlock, flags);
list_for_each_entry_safe(tgtport, next, &nvmet_fc_target_list,
tgt_list) {
if (!nvmet_fc_tgtport_get(tgtport))
continue;
spin_unlock_irqrestore(&nvmet_fc_tgtlock, flags);
spin_lock_irqsave(&tgtport->lock, flags);
list_for_each_entry(assoc, &tgtport->assoc_list, a_list) {
queue = assoc->queues[0];
if (queue && queue->nvme_sq.ctrl == ctrl) {
if (nvmet_fc_tgt_a_get(assoc))
found_ctrl = true;
break;
}
}
spin_unlock_irqrestore(&tgtport->lock, flags);
nvmet_fc_tgtport_put(tgtport);
if (found_ctrl) {
nvmet_fc_delete_target_assoc(assoc);
nvmet_fc_tgt_a_put(assoc);
return;
}
spin_lock_irqsave(&nvmet_fc_tgtlock, flags);
}
spin_unlock_irqrestore(&nvmet_fc_tgtlock, flags);
}
/**
* nvme_fc_unregister_targetport - transport entry point called by an
* LLDD to deregister/remove a previously
* registered a local NVME subsystem FC port.
* @tgtport: pointer to the (registered) target port that is to be
* deregistered.
*
* Returns:
* a completion status. Must be 0 upon success; a negative errno
* (ex: -ENXIO) upon failure.
*/
int
nvmet_fc_unregister_targetport(struct nvmet_fc_target_port *target_port)
{
struct nvmet_fc_tgtport *tgtport = targetport_to_tgtport(target_port);
/* terminate any outstanding associations */
__nvmet_fc_free_assocs(tgtport);
nvmet_fc_tgtport_put(tgtport);
return 0;
}
EXPORT_SYMBOL_GPL(nvmet_fc_unregister_targetport);
/* *********************** FC-NVME LS Handling **************************** */
static void
nvmet_fc_format_rsp_hdr(void *buf, u8 ls_cmd, __be32 desc_len, u8 rqst_ls_cmd)
{
struct fcnvme_ls_acc_hdr *acc = buf;
acc->w0.ls_cmd = ls_cmd;
acc->desc_list_len = desc_len;
acc->rqst.desc_tag = cpu_to_be32(FCNVME_LSDESC_RQST);
acc->rqst.desc_len =
fcnvme_lsdesc_len(sizeof(struct fcnvme_lsdesc_rqst));
acc->rqst.w0.ls_cmd = rqst_ls_cmd;
}
static int
nvmet_fc_format_rjt(void *buf, u16 buflen, u8 ls_cmd,
u8 reason, u8 explanation, u8 vendor)
{
struct fcnvme_ls_rjt *rjt = buf;
nvmet_fc_format_rsp_hdr(buf, FCNVME_LSDESC_RQST,
fcnvme_lsdesc_len(sizeof(struct fcnvme_ls_rjt)),
ls_cmd);
rjt->rjt.desc_tag = cpu_to_be32(FCNVME_LSDESC_RJT);
rjt->rjt.desc_len = fcnvme_lsdesc_len(sizeof(struct fcnvme_lsdesc_rjt));
rjt->rjt.reason_code = reason;
rjt->rjt.reason_explanation = explanation;
rjt->rjt.vendor = vendor;
return sizeof(struct fcnvme_ls_rjt);
}
/* Validation Error indexes into the string table below */
enum {
VERR_NO_ERROR = 0,
VERR_CR_ASSOC_LEN = 1,
VERR_CR_ASSOC_RQST_LEN = 2,
VERR_CR_ASSOC_CMD = 3,
VERR_CR_ASSOC_CMD_LEN = 4,
VERR_ERSP_RATIO = 5,
VERR_ASSOC_ALLOC_FAIL = 6,
VERR_QUEUE_ALLOC_FAIL = 7,
VERR_CR_CONN_LEN = 8,
VERR_CR_CONN_RQST_LEN = 9,
VERR_ASSOC_ID = 10,
VERR_ASSOC_ID_LEN = 11,
VERR_NO_ASSOC = 12,
VERR_CONN_ID = 13,
VERR_CONN_ID_LEN = 14,
VERR_NO_CONN = 15,
VERR_CR_CONN_CMD = 16,
VERR_CR_CONN_CMD_LEN = 17,
VERR_DISCONN_LEN = 18,
VERR_DISCONN_RQST_LEN = 19,
VERR_DISCONN_CMD = 20,
VERR_DISCONN_CMD_LEN = 21,
VERR_DISCONN_SCOPE = 22,
VERR_RS_LEN = 23,
VERR_RS_RQST_LEN = 24,
VERR_RS_CMD = 25,
VERR_RS_CMD_LEN = 26,
VERR_RS_RCTL = 27,
VERR_RS_RO = 28,
};
static char *validation_errors[] = {
"OK",
"Bad CR_ASSOC Length",
"Bad CR_ASSOC Rqst Length",
"Not CR_ASSOC Cmd",
"Bad CR_ASSOC Cmd Length",
"Bad Ersp Ratio",
"Association Allocation Failed",
"Queue Allocation Failed",
"Bad CR_CONN Length",
"Bad CR_CONN Rqst Length",
"Not Association ID",
"Bad Association ID Length",
"No Association",
"Not Connection ID",
"Bad Connection ID Length",
"No Connection",
"Not CR_CONN Cmd",
"Bad CR_CONN Cmd Length",
"Bad DISCONN Length",
"Bad DISCONN Rqst Length",
"Not DISCONN Cmd",
"Bad DISCONN Cmd Length",
"Bad Disconnect Scope",
"Bad RS Length",
"Bad RS Rqst Length",
"Not RS Cmd",
"Bad RS Cmd Length",
"Bad RS R_CTL",
"Bad RS Relative Offset",
};
static void
nvmet_fc_ls_create_association(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_ls_iod *iod)
{
struct fcnvme_ls_cr_assoc_rqst *rqst =
(struct fcnvme_ls_cr_assoc_rqst *)iod->rqstbuf;
struct fcnvme_ls_cr_assoc_acc *acc =
(struct fcnvme_ls_cr_assoc_acc *)iod->rspbuf;
struct nvmet_fc_tgt_queue *queue;
int ret = 0;
memset(acc, 0, sizeof(*acc));
/*
* FC-NVME spec changes. There are initiators sending different
* lengths as padding sizes for Create Association Cmd descriptor
* was incorrect.
* Accept anything of "minimum" length. Assume format per 1.15
* spec (with HOSTID reduced to 16 bytes), ignore how long the
* trailing pad length is.
*/
if (iod->rqstdatalen < FCNVME_LSDESC_CRA_RQST_MINLEN)
ret = VERR_CR_ASSOC_LEN;
else if (be32_to_cpu(rqst->desc_list_len) <
FCNVME_LSDESC_CRA_RQST_MIN_LISTLEN)
ret = VERR_CR_ASSOC_RQST_LEN;
else if (rqst->assoc_cmd.desc_tag !=
cpu_to_be32(FCNVME_LSDESC_CREATE_ASSOC_CMD))
ret = VERR_CR_ASSOC_CMD;
else if (be32_to_cpu(rqst->assoc_cmd.desc_len) <
FCNVME_LSDESC_CRA_CMD_DESC_MIN_DESCLEN)
ret = VERR_CR_ASSOC_CMD_LEN;
else if (!rqst->assoc_cmd.ersp_ratio ||
(be16_to_cpu(rqst->assoc_cmd.ersp_ratio) >=
be16_to_cpu(rqst->assoc_cmd.sqsize)))
ret = VERR_ERSP_RATIO;
else {
/* new association w/ admin queue */
iod->assoc = nvmet_fc_alloc_target_assoc(tgtport);
if (!iod->assoc)
ret = VERR_ASSOC_ALLOC_FAIL;
else {
queue = nvmet_fc_alloc_target_queue(iod->assoc, 0,
be16_to_cpu(rqst->assoc_cmd.sqsize));
if (!queue)
ret = VERR_QUEUE_ALLOC_FAIL;
}
}
if (ret) {
dev_err(tgtport->dev,
"Create Association LS failed: %s\n",
validation_errors[ret]);
iod->lsreq->rsplen = nvmet_fc_format_rjt(acc,
NVME_FC_MAX_LS_BUFFER_SIZE, rqst->w0.ls_cmd,
FCNVME_RJT_RC_LOGIC,
FCNVME_RJT_EXP_NONE, 0);
return;
}
queue->ersp_ratio = be16_to_cpu(rqst->assoc_cmd.ersp_ratio);
atomic_set(&queue->connected, 1);
queue->sqhd = 0; /* best place to init value */
/* format a response */
iod->lsreq->rsplen = sizeof(*acc);
nvmet_fc_format_rsp_hdr(acc, FCNVME_LS_ACC,
fcnvme_lsdesc_len(
sizeof(struct fcnvme_ls_cr_assoc_acc)),
FCNVME_LS_CREATE_ASSOCIATION);
acc->associd.desc_tag = cpu_to_be32(FCNVME_LSDESC_ASSOC_ID);
acc->associd.desc_len =
fcnvme_lsdesc_len(
sizeof(struct fcnvme_lsdesc_assoc_id));
acc->associd.association_id =
cpu_to_be64(nvmet_fc_makeconnid(iod->assoc, 0));
acc->connectid.desc_tag = cpu_to_be32(FCNVME_LSDESC_CONN_ID);
acc->connectid.desc_len =
fcnvme_lsdesc_len(
sizeof(struct fcnvme_lsdesc_conn_id));
acc->connectid.connection_id = acc->associd.association_id;
}
static void
nvmet_fc_ls_create_connection(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_ls_iod *iod)
{
struct fcnvme_ls_cr_conn_rqst *rqst =
(struct fcnvme_ls_cr_conn_rqst *)iod->rqstbuf;
struct fcnvme_ls_cr_conn_acc *acc =
(struct fcnvme_ls_cr_conn_acc *)iod->rspbuf;
struct nvmet_fc_tgt_queue *queue;
int ret = 0;
memset(acc, 0, sizeof(*acc));
if (iod->rqstdatalen < sizeof(struct fcnvme_ls_cr_conn_rqst))
ret = VERR_CR_CONN_LEN;
else if (rqst->desc_list_len !=
fcnvme_lsdesc_len(
sizeof(struct fcnvme_ls_cr_conn_rqst)))
ret = VERR_CR_CONN_RQST_LEN;
else if (rqst->associd.desc_tag != cpu_to_be32(FCNVME_LSDESC_ASSOC_ID))
ret = VERR_ASSOC_ID;
else if (rqst->associd.desc_len !=
fcnvme_lsdesc_len(
sizeof(struct fcnvme_lsdesc_assoc_id)))
ret = VERR_ASSOC_ID_LEN;
else if (rqst->connect_cmd.desc_tag !=
cpu_to_be32(FCNVME_LSDESC_CREATE_CONN_CMD))
ret = VERR_CR_CONN_CMD;
else if (rqst->connect_cmd.desc_len !=
fcnvme_lsdesc_len(
sizeof(struct fcnvme_lsdesc_cr_conn_cmd)))
ret = VERR_CR_CONN_CMD_LEN;
else if (!rqst->connect_cmd.ersp_ratio ||
(be16_to_cpu(rqst->connect_cmd.ersp_ratio) >=
be16_to_cpu(rqst->connect_cmd.sqsize)))
ret = VERR_ERSP_RATIO;
else {
/* new io queue */
iod->assoc = nvmet_fc_find_target_assoc(tgtport,
be64_to_cpu(rqst->associd.association_id));
if (!iod->assoc)
ret = VERR_NO_ASSOC;
else {
queue = nvmet_fc_alloc_target_queue(iod->assoc,
be16_to_cpu(rqst->connect_cmd.qid),
be16_to_cpu(rqst->connect_cmd.sqsize));
if (!queue)
ret = VERR_QUEUE_ALLOC_FAIL;
/* release get taken in nvmet_fc_find_target_assoc */
nvmet_fc_tgt_a_put(iod->assoc);
}
}
if (ret) {
dev_err(tgtport->dev,
"Create Connection LS failed: %s\n",
validation_errors[ret]);
iod->lsreq->rsplen = nvmet_fc_format_rjt(acc,
NVME_FC_MAX_LS_BUFFER_SIZE, rqst->w0.ls_cmd,
(ret == VERR_NO_ASSOC) ?
FCNVME_RJT_RC_INV_ASSOC :
FCNVME_RJT_RC_LOGIC,
FCNVME_RJT_EXP_NONE, 0);
return;
}
queue->ersp_ratio = be16_to_cpu(rqst->connect_cmd.ersp_ratio);
atomic_set(&queue->connected, 1);
queue->sqhd = 0; /* best place to init value */
/* format a response */
iod->lsreq->rsplen = sizeof(*acc);
nvmet_fc_format_rsp_hdr(acc, FCNVME_LS_ACC,
fcnvme_lsdesc_len(sizeof(struct fcnvme_ls_cr_conn_acc)),
FCNVME_LS_CREATE_CONNECTION);
acc->connectid.desc_tag = cpu_to_be32(FCNVME_LSDESC_CONN_ID);
acc->connectid.desc_len =
fcnvme_lsdesc_len(
sizeof(struct fcnvme_lsdesc_conn_id));
acc->connectid.connection_id =
cpu_to_be64(nvmet_fc_makeconnid(iod->assoc,
be16_to_cpu(rqst->connect_cmd.qid)));
}
static void
nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_ls_iod *iod)
{
struct fcnvme_ls_disconnect_rqst *rqst =
(struct fcnvme_ls_disconnect_rqst *)iod->rqstbuf;
struct fcnvme_ls_disconnect_acc *acc =
(struct fcnvme_ls_disconnect_acc *)iod->rspbuf;
struct nvmet_fc_tgt_queue *queue = NULL;
struct nvmet_fc_tgt_assoc *assoc;
int ret = 0;
bool del_assoc = false;
memset(acc, 0, sizeof(*acc));
if (iod->rqstdatalen < sizeof(struct fcnvme_ls_disconnect_rqst))
ret = VERR_DISCONN_LEN;
else if (rqst->desc_list_len !=
fcnvme_lsdesc_len(
sizeof(struct fcnvme_ls_disconnect_rqst)))
ret = VERR_DISCONN_RQST_LEN;
else if (rqst->associd.desc_tag != cpu_to_be32(FCNVME_LSDESC_ASSOC_ID))
ret = VERR_ASSOC_ID;
else if (rqst->associd.desc_len !=
fcnvme_lsdesc_len(
sizeof(struct fcnvme_lsdesc_assoc_id)))
ret = VERR_ASSOC_ID_LEN;
else if (rqst->discon_cmd.desc_tag !=
cpu_to_be32(FCNVME_LSDESC_DISCONN_CMD))
ret = VERR_DISCONN_CMD;
else if (rqst->discon_cmd.desc_len !=
fcnvme_lsdesc_len(
sizeof(struct fcnvme_lsdesc_disconn_cmd)))
ret = VERR_DISCONN_CMD_LEN;
else if ((rqst->discon_cmd.scope != FCNVME_DISCONN_ASSOCIATION) &&
(rqst->discon_cmd.scope != FCNVME_DISCONN_CONNECTION))
ret = VERR_DISCONN_SCOPE;
else {
/* match an active association */
assoc = nvmet_fc_find_target_assoc(tgtport,
be64_to_cpu(rqst->associd.association_id));
iod->assoc = assoc;
if (assoc) {
if (rqst->discon_cmd.scope ==
FCNVME_DISCONN_CONNECTION) {
queue = nvmet_fc_find_target_queue(tgtport,
be64_to_cpu(
rqst->discon_cmd.id));
if (!queue) {
nvmet_fc_tgt_a_put(assoc);
ret = VERR_NO_CONN;
}
}
} else
ret = VERR_NO_ASSOC;
}
if (ret) {
dev_err(tgtport->dev,
"Disconnect LS failed: %s\n",
validation_errors[ret]);
iod->lsreq->rsplen = nvmet_fc_format_rjt(acc,
NVME_FC_MAX_LS_BUFFER_SIZE, rqst->w0.ls_cmd,
(ret == VERR_NO_ASSOC) ?
FCNVME_RJT_RC_INV_ASSOC :
(ret == VERR_NO_CONN) ?
FCNVME_RJT_RC_INV_CONN :
FCNVME_RJT_RC_LOGIC,
FCNVME_RJT_EXP_NONE, 0);
return;
}
/* format a response */
iod->lsreq->rsplen = sizeof(*acc);
nvmet_fc_format_rsp_hdr(acc, FCNVME_LS_ACC,
fcnvme_lsdesc_len(
sizeof(struct fcnvme_ls_disconnect_acc)),
FCNVME_LS_DISCONNECT);
/* are we to delete a Connection ID (queue) */
if (queue) {
int qid = queue->qid;
nvmet_fc_delete_target_queue(queue);
/* release the get taken by find_target_queue */
nvmet_fc_tgt_q_put(queue);
/* tear association down if io queue terminated */
if (!qid)
del_assoc = true;
}
/* release get taken in nvmet_fc_find_target_assoc */
nvmet_fc_tgt_a_put(iod->assoc);
if (del_assoc)
nvmet_fc_delete_target_assoc(iod->assoc);
}
/* *********************** NVME Ctrl Routines **************************** */
static void nvmet_fc_fcp_nvme_cmd_done(struct nvmet_req *nvme_req);
static struct nvmet_fabrics_ops nvmet_fc_tgt_fcp_ops;
static void
nvmet_fc_xmt_ls_rsp_done(struct nvmefc_tgt_ls_req *lsreq)
{
struct nvmet_fc_ls_iod *iod = lsreq->nvmet_fc_private;
struct nvmet_fc_tgtport *tgtport = iod->tgtport;
fc_dma_sync_single_for_cpu(tgtport->dev, iod->rspdma,
NVME_FC_MAX_LS_BUFFER_SIZE, DMA_TO_DEVICE);
nvmet_fc_free_ls_iod(tgtport, iod);
nvmet_fc_tgtport_put(tgtport);
}
static void
nvmet_fc_xmt_ls_rsp(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_ls_iod *iod)
{
int ret;
fc_dma_sync_single_for_device(tgtport->dev, iod->rspdma,
NVME_FC_MAX_LS_BUFFER_SIZE, DMA_TO_DEVICE);
ret = tgtport->ops->xmt_ls_rsp(&tgtport->fc_target_port, iod->lsreq);
if (ret)
nvmet_fc_xmt_ls_rsp_done(iod->lsreq);
}
/*
* Actual processing routine for received FC-NVME LS Requests from the LLD
*/
static void
nvmet_fc_handle_ls_rqst(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_ls_iod *iod)
{
struct fcnvme_ls_rqst_w0 *w0 =
(struct fcnvme_ls_rqst_w0 *)iod->rqstbuf;
iod->lsreq->nvmet_fc_private = iod;
iod->lsreq->rspbuf = iod->rspbuf;
iod->lsreq->rspdma = iod->rspdma;
iod->lsreq->done = nvmet_fc_xmt_ls_rsp_done;
/* Be preventative. handlers will later set to valid length */
iod->lsreq->rsplen = 0;
iod->assoc = NULL;
/*
* handlers:
* parse request input, execute the request, and format the
* LS response
*/
switch (w0->ls_cmd) {
case FCNVME_LS_CREATE_ASSOCIATION:
/* Creates Association and initial Admin Queue/Connection */
nvmet_fc_ls_create_association(tgtport, iod);
break;
case FCNVME_LS_CREATE_CONNECTION:
/* Creates an IO Queue/Connection */
nvmet_fc_ls_create_connection(tgtport, iod);
break;
case FCNVME_LS_DISCONNECT:
/* Terminate a Queue/Connection or the Association */
nvmet_fc_ls_disconnect(tgtport, iod);
break;
default:
iod->lsreq->rsplen = nvmet_fc_format_rjt(iod->rspbuf,
NVME_FC_MAX_LS_BUFFER_SIZE, w0->ls_cmd,
FCNVME_RJT_RC_INVAL, FCNVME_RJT_EXP_NONE, 0);
}
nvmet_fc_xmt_ls_rsp(tgtport, iod);
}
/*
* Actual processing routine for received FC-NVME LS Requests from the LLD
*/
static void
nvmet_fc_handle_ls_rqst_work(struct work_struct *work)
{
struct nvmet_fc_ls_iod *iod =
container_of(work, struct nvmet_fc_ls_iod, work);
struct nvmet_fc_tgtport *tgtport = iod->tgtport;
nvmet_fc_handle_ls_rqst(tgtport, iod);
}
/**
* nvmet_fc_rcv_ls_req - transport entry point called by an LLDD
* upon the reception of a NVME LS request.
*
* The nvmet-fc layer will copy payload to an internal structure for
* processing. As such, upon completion of the routine, the LLDD may
* immediately free/reuse the LS request buffer passed in the call.
*
* If this routine returns error, the LLDD should abort the exchange.
*
* @tgtport: pointer to the (registered) target port the LS was
* received on.
* @lsreq: pointer to a lsreq request structure to be used to reference
* the exchange corresponding to the LS.
* @lsreqbuf: pointer to the buffer containing the LS Request
* @lsreqbuf_len: length, in bytes, of the received LS request
*/
int
nvmet_fc_rcv_ls_req(struct nvmet_fc_target_port *target_port,
struct nvmefc_tgt_ls_req *lsreq,
void *lsreqbuf, u32 lsreqbuf_len)
{
struct nvmet_fc_tgtport *tgtport = targetport_to_tgtport(target_port);
struct nvmet_fc_ls_iod *iod;
if (lsreqbuf_len > NVME_FC_MAX_LS_BUFFER_SIZE)
return -E2BIG;
if (!nvmet_fc_tgtport_get(tgtport))
return -ESHUTDOWN;
iod = nvmet_fc_alloc_ls_iod(tgtport);
if (!iod) {
nvmet_fc_tgtport_put(tgtport);
return -ENOENT;
}
iod->lsreq = lsreq;
iod->fcpreq = NULL;
memcpy(iod->rqstbuf, lsreqbuf, lsreqbuf_len);
iod->rqstdatalen = lsreqbuf_len;
schedule_work(&iod->work);
return 0;
}
EXPORT_SYMBOL_GPL(nvmet_fc_rcv_ls_req);
/*
* **********************
* Start of FCP handling
* **********************
*/
static int
nvmet_fc_alloc_tgt_pgs(struct nvmet_fc_fcp_iod *fod)
{
struct scatterlist *sg;
struct page *page;
unsigned int nent;
u32 page_len, length;
int i = 0;
length = fod->total_length;
nent = DIV_ROUND_UP(length, PAGE_SIZE);
sg = kmalloc_array(nent, sizeof(struct scatterlist), GFP_KERNEL);
if (!sg)
goto out;
sg_init_table(sg, nent);
while (length) {
page_len = min_t(u32, length, PAGE_SIZE);
page = alloc_page(GFP_KERNEL);
if (!page)
goto out_free_pages;
sg_set_page(&sg[i], page, page_len, 0);
length -= page_len;
i++;
}
fod->data_sg = sg;
fod->data_sg_cnt = nent;
fod->data_sg_cnt = fc_dma_map_sg(fod->tgtport->dev, sg, nent,
((fod->io_dir == NVMET_FCP_WRITE) ?
DMA_FROM_DEVICE : DMA_TO_DEVICE));
/* note: write from initiator perspective */
return 0;
out_free_pages:
while (i > 0) {
i--;
__free_page(sg_page(&sg[i]));
}
kfree(sg);
fod->data_sg = NULL;
fod->data_sg_cnt = 0;
out:
return NVME_SC_INTERNAL;
}
static void
nvmet_fc_free_tgt_pgs(struct nvmet_fc_fcp_iod *fod)
{
struct scatterlist *sg;
int count;
if (!fod->data_sg || !fod->data_sg_cnt)
return;
fc_dma_unmap_sg(fod->tgtport->dev, fod->data_sg, fod->data_sg_cnt,
((fod->io_dir == NVMET_FCP_WRITE) ?
DMA_FROM_DEVICE : DMA_TO_DEVICE));
for_each_sg(fod->data_sg, sg, fod->data_sg_cnt, count)
__free_page(sg_page(sg));
kfree(fod->data_sg);
fod->data_sg = NULL;
fod->data_sg_cnt = 0;
}
static bool
queue_90percent_full(struct nvmet_fc_tgt_queue *q, u32 sqhd)
{
u32 sqtail, used;
/* egad, this is ugly. And sqtail is just a best guess */
sqtail = atomic_read(&q->sqtail) % q->sqsize;
used = (sqtail < sqhd) ? (sqtail + q->sqsize - sqhd) : (sqtail - sqhd);
return ((used * 10) >= (((u32)(q->sqsize - 1) * 9)));
}
/*
* Prep RSP payload.
* May be a NVMET_FCOP_RSP or NVMET_FCOP_READDATA_RSP op
*/
static void
nvmet_fc_prep_fcp_rsp(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_fcp_iod *fod)
{
struct nvme_fc_ersp_iu *ersp = &fod->rspiubuf;
struct nvme_common_command *sqe = &fod->cmdiubuf.sqe.common;
struct nvme_completion *cqe = &ersp->cqe;
u32 *cqewd = (u32 *)cqe;
bool send_ersp = false;
u32 rsn, rspcnt, xfr_length;
if (fod->fcpreq->op == NVMET_FCOP_READDATA_RSP)
xfr_length = fod->total_length;
else
xfr_length = fod->offset;
/*
* check to see if we can send a 0's rsp.
* Note: to send a 0's response, the NVME-FC host transport will
* recreate the CQE. The host transport knows: sq id, SQHD (last
* seen in an ersp), and command_id. Thus it will create a
* zero-filled CQE with those known fields filled in. Transport
* must send an ersp for any condition where the cqe won't match
* this.
*
* Here are the FC-NVME mandated cases where we must send an ersp:
* every N responses, where N=ersp_ratio
* force fabric commands to send ersp's (not in FC-NVME but good
* practice)
* normal cmds: any time status is non-zero, or status is zero
* but words 0 or 1 are non-zero.
* the SQ is 90% or more full
* the cmd is a fused command
* transferred data length not equal to cmd iu length
*/
rspcnt = atomic_inc_return(&fod->queue->zrspcnt);
if (!(rspcnt % fod->queue->ersp_ratio) ||
sqe->opcode == nvme_fabrics_command ||
xfr_length != fod->total_length ||
(le16_to_cpu(cqe->status) & 0xFFFE) || cqewd[0] || cqewd[1] ||
(sqe->flags & (NVME_CMD_FUSE_FIRST | NVME_CMD_FUSE_SECOND)) ||
queue_90percent_full(fod->queue, le16_to_cpu(cqe->sq_head)))
send_ersp = true;
/* re-set the fields */
fod->fcpreq->rspaddr = ersp;
fod->fcpreq->rspdma = fod->rspdma;
if (!send_ersp) {
memset(ersp, 0, NVME_FC_SIZEOF_ZEROS_RSP);
fod->fcpreq->rsplen = NVME_FC_SIZEOF_ZEROS_RSP;
} else {
ersp->iu_len = cpu_to_be16(sizeof(*ersp)/sizeof(u32));
rsn = atomic_inc_return(&fod->queue->rsn);
ersp->rsn = cpu_to_be32(rsn);
ersp->xfrd_len = cpu_to_be32(xfr_length);
fod->fcpreq->rsplen = sizeof(*ersp);
}
fc_dma_sync_single_for_device(tgtport->dev, fod->rspdma,
sizeof(fod->rspiubuf), DMA_TO_DEVICE);
}
static void nvmet_fc_xmt_fcp_op_done(struct nvmefc_tgt_fcp_req *fcpreq);
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
static void
nvmet_fc_abort_op(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_fcp_iod *fod)
{
struct nvmefc_tgt_fcp_req *fcpreq = fod->fcpreq;
/* data no longer needed */
nvmet_fc_free_tgt_pgs(fod);
/*
* if an ABTS was received or we issued the fcp_abort early
* don't call abort routine again.
*/
/* no need to take lock - lock was taken earlier to get here */
if (!fod->aborted)
tgtport->ops->fcp_abort(&tgtport->fc_target_port, fcpreq);
nvmet_fc_free_fcp_iod(fod->queue, fod);
}
static void
nvmet_fc_xmt_fcp_rsp(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_fcp_iod *fod)
{
int ret;
fod->fcpreq->op = NVMET_FCOP_RSP;
fod->fcpreq->timeout = 0;
nvmet_fc_prep_fcp_rsp(tgtport, fod);
ret = tgtport->ops->fcp_op(&tgtport->fc_target_port, fod->fcpreq);
if (ret)
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
nvmet_fc_abort_op(tgtport, fod);
}
static void
nvmet_fc_transfer_fcp_data(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_fcp_iod *fod, u8 op)
{
struct nvmefc_tgt_fcp_req *fcpreq = fod->fcpreq;
struct scatterlist *sg, *datasg;
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
unsigned long flags;
u32 tlen, sg_off;
int ret;
fcpreq->op = op;
fcpreq->offset = fod->offset;
fcpreq->timeout = NVME_FC_TGTOP_TIMEOUT_SEC;
tlen = min_t(u32, (NVMET_FC_MAX_KB_PER_XFR * 1024),
(fod->total_length - fod->offset));
tlen = min_t(u32, tlen, NVME_FC_MAX_SEGMENTS * PAGE_SIZE);
tlen = min_t(u32, tlen, fod->tgtport->ops->max_sgl_segments
* PAGE_SIZE);
fcpreq->transfer_length = tlen;
fcpreq->transferred_length = 0;
fcpreq->fcp_error = 0;
fcpreq->rsplen = 0;
fcpreq->sg_cnt = 0;
datasg = fod->next_sg;
sg_off = fod->next_sg_offset;
for (sg = fcpreq->sg ; tlen; sg++) {
*sg = *datasg;
if (sg_off) {
sg->offset += sg_off;
sg->length -= sg_off;
sg->dma_address += sg_off;
sg_off = 0;
}
if (tlen < sg->length) {
sg->length = tlen;
fod->next_sg = datasg;
fod->next_sg_offset += tlen;
} else if (tlen == sg->length) {
fod->next_sg_offset = 0;
fod->next_sg = sg_next(datasg);
} else {
fod->next_sg_offset = 0;
datasg = sg_next(datasg);
}
tlen -= sg->length;
fcpreq->sg_cnt++;
}
/*
* If the last READDATA request: check if LLDD supports
* combined xfr with response.
*/
if ((op == NVMET_FCOP_READDATA) &&
((fod->offset + fcpreq->transfer_length) == fod->total_length) &&
(tgtport->ops->target_features & NVMET_FCTGTFEAT_READDATA_RSP)) {
fcpreq->op = NVMET_FCOP_READDATA_RSP;
nvmet_fc_prep_fcp_rsp(tgtport, fod);
}
ret = tgtport->ops->fcp_op(&tgtport->fc_target_port, fod->fcpreq);
if (ret) {
/*
* should be ok to set w/o lock as its in the thread of
* execution (not an async timer routine) and doesn't
* contend with any clearing action
*/
fod->abort = true;
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
if (op == NVMET_FCOP_WRITEDATA) {
spin_lock_irqsave(&fod->flock, flags);
fod->writedataactive = false;
spin_unlock_irqrestore(&fod->flock, flags);
nvmet_req_complete(&fod->req,
NVME_SC_FC_TRANSPORT_ERROR);
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
} else /* NVMET_FCOP_READDATA or NVMET_FCOP_READDATA_RSP */ {
fcpreq->fcp_error = ret;
fcpreq->transferred_length = 0;
nvmet_fc_xmt_fcp_op_done(fod->fcpreq);
}
}
}
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
static inline bool
__nvmet_fc_fod_op_abort(struct nvmet_fc_fcp_iod *fod, bool abort)
{
struct nvmefc_tgt_fcp_req *fcpreq = fod->fcpreq;
struct nvmet_fc_tgtport *tgtport = fod->tgtport;
/* if in the middle of an io and we need to tear down */
if (abort) {
if (fcpreq->op == NVMET_FCOP_WRITEDATA) {
nvmet_req_complete(&fod->req,
NVME_SC_FC_TRANSPORT_ERROR);
return true;
}
nvmet_fc_abort_op(tgtport, fod);
return true;
}
return false;
}
/*
* actual done handler for FCP operations when completed by the lldd
*/
static void
nvmet_fc_fod_op_done(struct nvmet_fc_fcp_iod *fod)
{
struct nvmefc_tgt_fcp_req *fcpreq = fod->fcpreq;
struct nvmet_fc_tgtport *tgtport = fod->tgtport;
unsigned long flags;
bool abort;
spin_lock_irqsave(&fod->flock, flags);
abort = fod->abort;
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
fod->writedataactive = false;
spin_unlock_irqrestore(&fod->flock, flags);
switch (fcpreq->op) {
case NVMET_FCOP_WRITEDATA:
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
if (__nvmet_fc_fod_op_abort(fod, abort))
return;
if (fcpreq->fcp_error ||
fcpreq->transferred_length != fcpreq->transfer_length) {
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
spin_lock(&fod->flock);
fod->abort = true;
spin_unlock(&fod->flock);
nvmet_req_complete(&fod->req,
NVME_SC_FC_TRANSPORT_ERROR);
return;
}
fod->offset += fcpreq->transferred_length;
if (fod->offset != fod->total_length) {
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
spin_lock_irqsave(&fod->flock, flags);
fod->writedataactive = true;
spin_unlock_irqrestore(&fod->flock, flags);
/* transfer the next chunk */
nvmet_fc_transfer_fcp_data(tgtport, fod,
NVMET_FCOP_WRITEDATA);
return;
}
/* data transfer complete, resume with nvmet layer */
fod->req.execute(&fod->req);
break;
case NVMET_FCOP_READDATA:
case NVMET_FCOP_READDATA_RSP:
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
if (__nvmet_fc_fod_op_abort(fod, abort))
return;
if (fcpreq->fcp_error ||
fcpreq->transferred_length != fcpreq->transfer_length) {
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
nvmet_fc_abort_op(tgtport, fod);
return;
}
/* success */
if (fcpreq->op == NVMET_FCOP_READDATA_RSP) {
/* data no longer needed */
nvmet_fc_free_tgt_pgs(fod);
nvmet_fc_free_fcp_iod(fod->queue, fod);
return;
}
fod->offset += fcpreq->transferred_length;
if (fod->offset != fod->total_length) {
/* transfer the next chunk */
nvmet_fc_transfer_fcp_data(tgtport, fod,
NVMET_FCOP_READDATA);
return;
}
/* data transfer complete, send response */
/* data no longer needed */
nvmet_fc_free_tgt_pgs(fod);
nvmet_fc_xmt_fcp_rsp(tgtport, fod);
break;
case NVMET_FCOP_RSP:
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
if (__nvmet_fc_fod_op_abort(fod, abort))
return;
nvmet_fc_free_fcp_iod(fod->queue, fod);
break;
default:
break;
}
}
static void
nvmet_fc_fcp_rqst_op_done_work(struct work_struct *work)
{
struct nvmet_fc_fcp_iod *fod =
container_of(work, struct nvmet_fc_fcp_iod, done_work);
nvmet_fc_fod_op_done(fod);
}
static void
nvmet_fc_xmt_fcp_op_done(struct nvmefc_tgt_fcp_req *fcpreq)
{
struct nvmet_fc_fcp_iod *fod = fcpreq->nvmet_fc_private;
struct nvmet_fc_tgt_queue *queue = fod->queue;
if (fod->tgtport->ops->target_features & NVMET_FCTGTFEAT_OPDONE_IN_ISR)
/* context switch so completion is not in ISR context */
queue_work_on(queue->cpu, queue->work_q, &fod->done_work);
else
nvmet_fc_fod_op_done(fod);
}
/*
* actual completion handler after execution by the nvmet layer
*/
static void
__nvmet_fc_fcp_nvme_cmd_done(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_fcp_iod *fod, int status)
{
struct nvme_common_command *sqe = &fod->cmdiubuf.sqe.common;
struct nvme_completion *cqe = &fod->rspiubuf.cqe;
unsigned long flags;
bool abort;
spin_lock_irqsave(&fod->flock, flags);
abort = fod->abort;
spin_unlock_irqrestore(&fod->flock, flags);
/* if we have a CQE, snoop the last sq_head value */
if (!status)
fod->queue->sqhd = cqe->sq_head;
if (abort) {
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
nvmet_fc_abort_op(tgtport, fod);
return;
}
/* if an error handling the cmd post initial parsing */
if (status) {
/* fudge up a failed CQE status for our transport error */
memset(cqe, 0, sizeof(*cqe));
cqe->sq_head = fod->queue->sqhd; /* echo last cqe sqhd */
cqe->sq_id = cpu_to_le16(fod->queue->qid);
cqe->command_id = sqe->command_id;
cqe->status = cpu_to_le16(status);
} else {
/*
* try to push the data even if the SQE status is non-zero.
* There may be a status where data still was intended to
* be moved
*/
if ((fod->io_dir == NVMET_FCP_READ) && (fod->data_sg_cnt)) {
/* push the data over before sending rsp */
nvmet_fc_transfer_fcp_data(tgtport, fod,
NVMET_FCOP_READDATA);
return;
}
/* writes & no data - fall thru */
}
/* data no longer needed */
nvmet_fc_free_tgt_pgs(fod);
nvmet_fc_xmt_fcp_rsp(tgtport, fod);
}
static void
nvmet_fc_fcp_nvme_cmd_done(struct nvmet_req *nvme_req)
{
struct nvmet_fc_fcp_iod *fod = nvmet_req_to_fod(nvme_req);
struct nvmet_fc_tgtport *tgtport = fod->tgtport;
__nvmet_fc_fcp_nvme_cmd_done(tgtport, fod, 0);
}
/*
* Actual processing routine for received FC-NVME LS Requests from the LLD
*/
static void
nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
struct nvmet_fc_fcp_iod *fod)
{
struct nvme_fc_cmd_iu *cmdiu = &fod->cmdiubuf;
int ret;
/*
* Fused commands are currently not supported in the linux
* implementation.
*
* As such, the implementation of the FC transport does not
* look at the fused commands and order delivery to the upper
* layer until we have both based on csn.
*/
fod->fcpreq->done = nvmet_fc_xmt_fcp_op_done;
fod->total_length = be32_to_cpu(cmdiu->data_len);
if (cmdiu->flags & FCNVME_CMD_FLAGS_WRITE) {
fod->io_dir = NVMET_FCP_WRITE;
if (!nvme_is_write(&cmdiu->sqe))
goto transport_error;
} else if (cmdiu->flags & FCNVME_CMD_FLAGS_READ) {
fod->io_dir = NVMET_FCP_READ;
if (nvme_is_write(&cmdiu->sqe))
goto transport_error;
} else {
fod->io_dir = NVMET_FCP_NODATA;
if (fod->total_length)
goto transport_error;
}
fod->req.cmd = &fod->cmdiubuf.sqe;
fod->req.rsp = &fod->rspiubuf.cqe;
fod->req.port = fod->queue->port;
/* ensure nvmet handlers will set cmd handler callback */
fod->req.execute = NULL;
/* clear any response payload */
memset(&fod->rspiubuf, 0, sizeof(fod->rspiubuf));
fod->data_sg = NULL;
fod->data_sg_cnt = 0;
ret = nvmet_req_init(&fod->req,
&fod->queue->nvme_cq,
&fod->queue->nvme_sq,
&nvmet_fc_tgt_fcp_ops);
if (!ret) {
/* bad SQE content or invalid ctrl state */
/* nvmet layer has already called op done to send rsp. */
return;
}
/* keep a running counter of tail position */
atomic_inc(&fod->queue->sqtail);
if (fod->total_length) {
ret = nvmet_fc_alloc_tgt_pgs(fod);
if (ret) {
nvmet_req_complete(&fod->req, ret);
return;
}
}
fod->req.sg = fod->data_sg;
fod->req.sg_cnt = fod->data_sg_cnt;
fod->offset = 0;
fod->next_sg = fod->data_sg;
fod->next_sg_offset = 0;
if (fod->io_dir == NVMET_FCP_WRITE) {
/* pull the data over before invoking nvmet layer */
nvmet_fc_transfer_fcp_data(tgtport, fod, NVMET_FCOP_WRITEDATA);
return;
}
/*
* Reads or no data:
*
* can invoke the nvmet_layer now. If read data, cmd completion will
* push the data
*/
fod->req.execute(&fod->req);
return;
transport_error:
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
nvmet_fc_abort_op(tgtport, fod);
}
/*
* Actual processing routine for received FC-NVME LS Requests from the LLD
*/
static void
nvmet_fc_handle_fcp_rqst_work(struct work_struct *work)
{
struct nvmet_fc_fcp_iod *fod =
container_of(work, struct nvmet_fc_fcp_iod, work);
struct nvmet_fc_tgtport *tgtport = fod->tgtport;
nvmet_fc_handle_fcp_rqst(tgtport, fod);
}
/**
* nvmet_fc_rcv_fcp_req - transport entry point called by an LLDD
* upon the reception of a NVME FCP CMD IU.
*
* Pass a FC-NVME FCP CMD IU received from the FC link to the nvmet-fc
* layer for processing.
*
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
* The nvmet_fc layer allocates a local job structure (struct
* nvmet_fc_fcp_iod) from the queue for the io and copies the
* CMD IU buffer to the job structure. As such, on a successful
* completion (returns 0), the LLDD may immediately free/reuse
* the CMD IU buffer passed in the call.
*
* However, in some circumstances, due to the packetized nature of FC
* and the api of the FC LLDD which may issue a hw command to send the
* response, but the LLDD may not get the hw completion for that command
* and upcall the nvmet_fc layer before a new command may be
* asynchronously received - its possible for a command to be received
* before the LLDD and nvmet_fc have recycled the job structure. It gives
* the appearance of more commands received than fits in the sq.
* To alleviate this scenario, a temporary queue is maintained in the
* transport for pending LLDD requests waiting for a queue job structure.
* In these "overrun" cases, a temporary queue element is allocated
* the LLDD request and CMD iu buffer information remembered, and the
* routine returns a -EOVERFLOW status. Subsequently, when a queue job
* structure is freed, it is immediately reallocated for anything on the
* pending request list. The LLDDs defer_rcv() callback is called,
* informing the LLDD that it may reuse the CMD IU buffer, and the io
* is then started normally with the transport.
*
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
* The LLDD, when receiving an -EOVERFLOW completion status, is to treat
* the completion as successful but must not reuse the CMD IU buffer
* until the LLDD's defer_rcv() callback has been called for the
* corresponding struct nvmefc_tgt_fcp_req pointer.
*
* If there is any other condition in which an error occurs, the
* transport will return a non-zero status indicating the error.
* In all cases other than -EOVERFLOW, the transport has not accepted the
* request and the LLDD should abort the exchange.
*
* @target_port: pointer to the (registered) target port the FCP CMD IU
* was received on.
* @fcpreq: pointer to a fcpreq request structure to be used to reference
* the exchange corresponding to the FCP Exchange.
* @cmdiubuf: pointer to the buffer containing the FCP CMD IU
* @cmdiubuf_len: length, in bytes, of the received FCP CMD IU
*/
int
nvmet_fc_rcv_fcp_req(struct nvmet_fc_target_port *target_port,
struct nvmefc_tgt_fcp_req *fcpreq,
void *cmdiubuf, u32 cmdiubuf_len)
{
struct nvmet_fc_tgtport *tgtport = targetport_to_tgtport(target_port);
struct nvme_fc_cmd_iu *cmdiu = cmdiubuf;
struct nvmet_fc_tgt_queue *queue;
struct nvmet_fc_fcp_iod *fod;
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
struct nvmet_fc_defer_fcp_req *deferfcp;
unsigned long flags;
/* validate iu, so the connection id can be used to find the queue */
if ((cmdiubuf_len != sizeof(*cmdiu)) ||
(cmdiu->scsi_id != NVME_CMD_SCSI_ID) ||
(cmdiu->fc_id != NVME_CMD_FC_ID) ||
(be16_to_cpu(cmdiu->iu_len) != (sizeof(*cmdiu)/4)))
return -EIO;
queue = nvmet_fc_find_target_queue(tgtport,
be64_to_cpu(cmdiu->connection_id));
if (!queue)
return -ENOTCONN;
/*
* note: reference taken by find_target_queue
* After successful fod allocation, the fod will inherit the
* ownership of that reference and will remove the reference
* when the fod is freed.
*/
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
spin_lock_irqsave(&queue->qlock, flags);
fod = nvmet_fc_alloc_fcp_iod(queue);
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
if (fod) {
spin_unlock_irqrestore(&queue->qlock, flags);
fcpreq->nvmet_fc_private = fod;
fod->fcpreq = fcpreq;
memcpy(&fod->cmdiubuf, cmdiubuf, cmdiubuf_len);
nvmet_fc_queue_fcp_req(tgtport, queue, fcpreq);
return 0;
}
if (!tgtport->ops->defer_rcv) {
spin_unlock_irqrestore(&queue->qlock, flags);
/* release the queue lookup reference */
nvmet_fc_tgt_q_put(queue);
return -ENOENT;
}
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
deferfcp = list_first_entry_or_null(&queue->avail_defer_list,
struct nvmet_fc_defer_fcp_req, req_list);
if (deferfcp) {
/* Just re-use one that was previously allocated */
list_del(&deferfcp->req_list);
} else {
spin_unlock_irqrestore(&queue->qlock, flags);
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
/* Now we need to dynamically allocate one */
deferfcp = kmalloc(sizeof(*deferfcp), GFP_KERNEL);
if (!deferfcp) {
/* release the queue lookup reference */
nvmet_fc_tgt_q_put(queue);
return -ENOMEM;
}
spin_lock_irqsave(&queue->qlock, flags);
}
nvmet_fc: add defer_req callback for deferment of cmd buffer return At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-02 05:12:39 +07:00
/* For now, use rspaddr / rsplen to save payload information */
fcpreq->rspaddr = cmdiubuf;
fcpreq->rsplen = cmdiubuf_len;
deferfcp->fcp_req = fcpreq;
/* defer processing till a fod becomes available */
list_add_tail(&deferfcp->req_list, &queue->pending_cmd_list);
/* NOTE: the queue lookup reference is still valid */
spin_unlock_irqrestore(&queue->qlock, flags);
return -EOVERFLOW;
}
EXPORT_SYMBOL_GPL(nvmet_fc_rcv_fcp_req);
nvmet_fc: Rework target side abort handling target transport: ---------------------- There are cases when there is a need to abort in-progress target operations (writedata) so that controller termination or errors can clean up. That can't happen currently as the abort is another target op type, so it can't be used till the running one finishes (and it may not). Solve by removing the abort op type and creating a separate downcall from the transport to the lldd to request an io to be aborted. The transport will abort ios on queue teardown or io errors. In general the transport tries to call the lldd abort only when the io state is idle. Meaning: ops that transmit data (readdata or rsp) will always finish their transmit (or the lldd will see a state on the link or initiator port that fails the transmit) and the done call for the operation will occur. The transport will wait for the op done upcall before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; Similarly, ios that are not waiting for data or transmitting data must be in the nvmet layer being processed. The transport will wait for the nvmet layer completion before calling the abort function, and as the io is idle, the io can be cleaned up immediately after the abort call; As for ops that are waiting for data (writedata), they may be outstanding indefinitely if the lldd doesn't see a condition where the initiatior port or link is bad. In those cases, the transport will call the abort function and wait for the lldd's op done upcall for the operation, where it will then clean up the io. Additionally, if a lldd receives an ABTS and matches it to an outstanding request in the transport, A new new transport upcall was created to abort the outstanding request in the transport. The transport expects any outstanding op call (readdata or writedata) will completed by the lldd and the operation upcall made. The transport doesn't act on the reported abort (e.g. clean up the io) until an op done upcall occurs, a new op is attempted, or the nvmet layer completes the io processing. fcloop: ---------------------- Updated to support the new target apis. On fcp io aborts from the initiator, the loopback context is updated to NULL out the half that has completed. The initiator side is immediately called after the abort request with an io completion (abort status). On fcp io aborts from the target, the io is stopped and the initiator side sees it as an aborted io. Target side ops, perhaps in progress while the initiator side is done, continue but noop the data movement as there's no structure on the initiator side to reference. patch also contains: ---------------------- Revised lpfc to support the new abort api commonized rsp buffer syncing and nulling of private data based on calling paths. errors in op done calls don't take action on the fod. They're bad operations which implies the fod may be bad. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-12 01:32:31 +07:00
/**
* nvmet_fc_rcv_fcp_abort - transport entry point called by an LLDD
* upon the reception of an ABTS for a FCP command
*
* Notify the transport that an ABTS has been received for a FCP command
* that had been given to the transport via nvmet_fc_rcv_fcp_req(). The
* LLDD believes the command is still being worked on
* (template_ops->fcp_req_release() has not been called).
*
* The transport will wait for any outstanding work (an op to the LLDD,
* which the lldd should complete with error due to the ABTS; or the
* completion from the nvmet layer of the nvme command), then will
* stop processing and call the nvmet_fc_rcv_fcp_req() callback to
* return the i/o context to the LLDD. The LLDD may send the BA_ACC
* to the ABTS either after return from this function (assuming any
* outstanding op work has been terminated) or upon the callback being
* called.
*
* @target_port: pointer to the (registered) target port the FCP CMD IU
* was received on.
* @fcpreq: pointer to the fcpreq request structure that corresponds
* to the exchange that received the ABTS.
*/
void
nvmet_fc_rcv_fcp_abort(struct nvmet_fc_target_port *target_port,
struct nvmefc_tgt_fcp_req *fcpreq)
{
struct nvmet_fc_fcp_iod *fod = fcpreq->nvmet_fc_private;
struct nvmet_fc_tgt_queue *queue;
unsigned long flags;
if (!fod || fod->fcpreq != fcpreq)
/* job appears to have already completed, ignore abort */
return;
queue = fod->queue;
spin_lock_irqsave(&queue->qlock, flags);
if (fod->active) {
/*
* mark as abort. The abort handler, invoked upon completion
* of any work, will detect the aborted status and do the
* callback.
*/
spin_lock(&fod->flock);
fod->abort = true;
fod->aborted = true;
spin_unlock(&fod->flock);
}
spin_unlock_irqrestore(&queue->qlock, flags);
}
EXPORT_SYMBOL_GPL(nvmet_fc_rcv_fcp_abort);
struct nvmet_fc_traddr {
u64 nn;
u64 pn;
};
static int
__nvme_fc_parse_u64(substring_t *sstr, u64 *val)
{
u64 token64;
if (match_u64(sstr, &token64))
return -EINVAL;
*val = token64;
return 0;
}
/*
* This routine validates and extracts the WWN's from the TRADDR string.
* As kernel parsers need the 0x to determine number base, universally
* build string to parse with 0x prefix before parsing name strings.
*/
static int
nvme_fc_parse_traddr(struct nvmet_fc_traddr *traddr, char *buf, size_t blen)
{
char name[2 + NVME_FC_TRADDR_HEXNAMELEN + 1];
substring_t wwn = { name, &name[sizeof(name)-1] };
int nnoffset, pnoffset;
/* validate it string one of the 2 allowed formats */
if (strnlen(buf, blen) == NVME_FC_TRADDR_MAXLENGTH &&
!strncmp(buf, "nn-0x", NVME_FC_TRADDR_OXNNLEN) &&
!strncmp(&buf[NVME_FC_TRADDR_MAX_PN_OFFSET],
"pn-0x", NVME_FC_TRADDR_OXNNLEN)) {
nnoffset = NVME_FC_TRADDR_OXNNLEN;
pnoffset = NVME_FC_TRADDR_MAX_PN_OFFSET +
NVME_FC_TRADDR_OXNNLEN;
} else if ((strnlen(buf, blen) == NVME_FC_TRADDR_MINLENGTH &&
!strncmp(buf, "nn-", NVME_FC_TRADDR_NNLEN) &&
!strncmp(&buf[NVME_FC_TRADDR_MIN_PN_OFFSET],
"pn-", NVME_FC_TRADDR_NNLEN))) {
nnoffset = NVME_FC_TRADDR_NNLEN;
pnoffset = NVME_FC_TRADDR_MIN_PN_OFFSET + NVME_FC_TRADDR_NNLEN;
} else
goto out_einval;
name[0] = '0';
name[1] = 'x';
name[2 + NVME_FC_TRADDR_HEXNAMELEN] = 0;
memcpy(&name[2], &buf[nnoffset], NVME_FC_TRADDR_HEXNAMELEN);
if (__nvme_fc_parse_u64(&wwn, &traddr->nn))
goto out_einval;
memcpy(&name[2], &buf[pnoffset], NVME_FC_TRADDR_HEXNAMELEN);
if (__nvme_fc_parse_u64(&wwn, &traddr->pn))
goto out_einval;
return 0;
out_einval:
pr_warn("%s: bad traddr string\n", __func__);
return -EINVAL;
}
static int
nvmet_fc_add_port(struct nvmet_port *port)
{
struct nvmet_fc_tgtport *tgtport;
struct nvmet_fc_traddr traddr = { 0L, 0L };
unsigned long flags;
int ret;
/* validate the address info */
if ((port->disc_addr.trtype != NVMF_TRTYPE_FC) ||
(port->disc_addr.adrfam != NVMF_ADDR_FAMILY_FC))
return -EINVAL;
/* map the traddr address info to a target port */
ret = nvme_fc_parse_traddr(&traddr, port->disc_addr.traddr,
sizeof(port->disc_addr.traddr));
if (ret)
return ret;
ret = -ENXIO;
spin_lock_irqsave(&nvmet_fc_tgtlock, flags);
list_for_each_entry(tgtport, &nvmet_fc_target_list, tgt_list) {
if ((tgtport->fc_target_port.node_name == traddr.nn) &&
(tgtport->fc_target_port.port_name == traddr.pn)) {
/* a FC port can only be 1 nvmet port id */
if (!tgtport->port) {
tgtport->port = port;
port->priv = tgtport;
nvmet_fc_tgtport_get(tgtport);
ret = 0;
} else
ret = -EALREADY;
break;
}
}
spin_unlock_irqrestore(&nvmet_fc_tgtlock, flags);
return ret;
}
static void
nvmet_fc_remove_port(struct nvmet_port *port)
{
struct nvmet_fc_tgtport *tgtport = port->priv;
unsigned long flags;
spin_lock_irqsave(&nvmet_fc_tgtlock, flags);
if (tgtport->port == port) {
nvmet_fc_tgtport_put(tgtport);
tgtport->port = NULL;
}
spin_unlock_irqrestore(&nvmet_fc_tgtlock, flags);
}
static struct nvmet_fabrics_ops nvmet_fc_tgt_fcp_ops = {
.owner = THIS_MODULE,
.type = NVMF_TRTYPE_FC,
.msdbd = 1,
.add_port = nvmet_fc_add_port,
.remove_port = nvmet_fc_remove_port,
.queue_response = nvmet_fc_fcp_nvme_cmd_done,
.delete_ctrl = nvmet_fc_delete_ctrl,
};
static int __init nvmet_fc_init_module(void)
{
return nvmet_register_transport(&nvmet_fc_tgt_fcp_ops);
}
static void __exit nvmet_fc_exit_module(void)
{
/* sanity check - all lports should be removed */
if (!list_empty(&nvmet_fc_target_list))
pr_warn("%s: targetport list not empty\n", __func__);
nvmet_unregister_transport(&nvmet_fc_tgt_fcp_ops);
ida_destroy(&nvmet_fc_tgtport_cnt);
}
module_init(nvmet_fc_init_module);
module_exit(nvmet_fc_exit_module);
MODULE_LICENSE("GPL v2");