2007-11-19 23:20:12 +07:00
|
|
|
/* ZD1211 USB-WLAN driver for Linux
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
|
|
|
|
|
* Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
|
|
|
|
|
|
#include "zd_rf.h"
|
|
|
|
|
#include "zd_usb.h"
|
|
|
|
|
#include "zd_chip.h"
|
|
|
|
|
|
2007-07-02 00:22:04 +07:00
|
|
|
#define IS_AL2230S(chip) ((chip)->al2230s_bit || (chip)->rf.type == AL2230S_RF)
|
|
|
|
|
|
2006-08-12 23:59:42 +07:00
|
|
|
static const u32 zd1211_al2230_table[][3] = {
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
RF_CHANNEL( 1) = { 0x03f790, 0x033331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL( 2) = { 0x03f790, 0x0b3331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL( 3) = { 0x03e790, 0x033331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL( 4) = { 0x03e790, 0x0b3331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL( 5) = { 0x03f7a0, 0x033331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL( 6) = { 0x03f7a0, 0x0b3331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL( 7) = { 0x03e7a0, 0x033331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL( 8) = { 0x03e7a0, 0x0b3331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL( 9) = { 0x03f7b0, 0x033331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL(10) = { 0x03f7b0, 0x0b3331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL(11) = { 0x03e7b0, 0x033331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL(12) = { 0x03e7b0, 0x0b3331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL(13) = { 0x03f7c0, 0x033331, 0x00000d, },
|
|
|
|
|
RF_CHANNEL(14) = { 0x03e7c0, 0x066661, 0x00000d, },
|
|
|
|
|
};
|
|
|
|
|
|
2006-08-12 23:59:42 +07:00
|
|
|
static const u32 zd1211b_al2230_table[][3] = {
|
|
|
|
|
RF_CHANNEL( 1) = { 0x09efc0, 0x8cccc0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL( 2) = { 0x09efc0, 0x8cccd0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL( 3) = { 0x09e7c0, 0x8cccc0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL( 4) = { 0x09e7c0, 0x8cccd0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL( 5) = { 0x05efc0, 0x8cccc0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL( 6) = { 0x05efc0, 0x8cccd0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL( 7) = { 0x05e7c0, 0x8cccc0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL( 8) = { 0x05e7c0, 0x8cccd0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL( 9) = { 0x0defc0, 0x8cccc0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL(10) = { 0x0defc0, 0x8cccd0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL(11) = { 0x0de7c0, 0x8cccc0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL(12) = { 0x0de7c0, 0x8cccd0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL(13) = { 0x03efc0, 0x8cccc0, 0xb00000, },
|
|
|
|
|
RF_CHANNEL(14) = { 0x03e7c0, 0x866660, 0xb00000, },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct zd_ioreq16 zd1211b_ioreqs_shared_1[] = {
|
|
|
|
|
{ CR240, 0x57 }, { CR9, 0xe0 },
|
|
|
|
|
};
|
|
|
|
|
|
2007-03-12 02:54:28 +07:00
|
|
|
static const struct zd_ioreq16 ioreqs_init_al2230s[] = {
|
|
|
|
|
{ CR47, 0x1e }, /* MARK_002 */
|
|
|
|
|
{ CR106, 0x22 },
|
|
|
|
|
{ CR107, 0x2a }, /* MARK_002 */
|
|
|
|
|
{ CR109, 0x13 }, /* MARK_002 */
|
|
|
|
|
{ CR118, 0xf8 }, /* MARK_002 */
|
|
|
|
|
{ CR119, 0x12 }, { CR122, 0xe0 },
|
|
|
|
|
{ CR128, 0x10 }, /* MARK_001 from 0xe->0x10 */
|
|
|
|
|
{ CR129, 0x0e }, /* MARK_001 from 0xd->0x0e */
|
|
|
|
|
{ CR130, 0x10 }, /* MARK_001 from 0xb->0x0d */
|
|
|
|
|
};
|
|
|
|
|
|
2006-08-12 23:59:42 +07:00
|
|
|
static int zd1211b_al2230_finalize_rf(struct zd_chip *chip)
|
|
|
|
|
{
|
|
|
|
|
int r;
|
|
|
|
|
static const struct zd_ioreq16 ioreqs[] = {
|
|
|
|
|
{ CR80, 0x30 }, { CR81, 0x30 }, { CR79, 0x58 },
|
|
|
|
|
{ CR12, 0xf0 }, { CR77, 0x1b }, { CR78, 0x58 },
|
|
|
|
|
{ CR203, 0x06 },
|
|
|
|
|
{ },
|
|
|
|
|
|
|
|
|
|
{ CR240, 0x80 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
|
|
|
|
|
/* related to antenna selection? */
|
|
|
|
|
if (chip->new_phy_layout) {
|
|
|
|
|
r = zd_iowrite16_locked(chip, 0xe1, CR9);
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return zd_iowrite16_locked(chip, 0x06, CR203);
|
|
|
|
|
}
|
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
static int zd1211_al2230_init_hw(struct zd_rf *rf)
|
|
|
|
|
{
|
|
|
|
|
int r;
|
|
|
|
|
struct zd_chip *chip = zd_rf_to_chip(rf);
|
|
|
|
|
|
2007-03-12 02:54:28 +07:00
|
|
|
static const struct zd_ioreq16 ioreqs_init[] = {
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{ CR15, 0x20 }, { CR23, 0x40 }, { CR24, 0x20 },
|
|
|
|
|
{ CR26, 0x11 }, { CR28, 0x3e }, { CR29, 0x00 },
|
|
|
|
|
{ CR44, 0x33 }, { CR106, 0x2a }, { CR107, 0x1a },
|
|
|
|
|
{ CR109, 0x09 }, { CR110, 0x27 }, { CR111, 0x2b },
|
|
|
|
|
{ CR112, 0x2b }, { CR119, 0x0a }, { CR10, 0x89 },
|
|
|
|
|
/* for newest (3rd cut) AL2300 */
|
|
|
|
|
{ CR17, 0x28 },
|
|
|
|
|
{ CR26, 0x93 }, { CR34, 0x30 },
|
|
|
|
|
/* for newest (3rd cut) AL2300 */
|
|
|
|
|
{ CR35, 0x3e },
|
|
|
|
|
{ CR41, 0x24 }, { CR44, 0x32 },
|
|
|
|
|
/* for newest (3rd cut) AL2300 */
|
|
|
|
|
{ CR46, 0x96 },
|
|
|
|
|
{ CR47, 0x1e }, { CR79, 0x58 }, { CR80, 0x30 },
|
|
|
|
|
{ CR81, 0x30 }, { CR87, 0x0a }, { CR89, 0x04 },
|
|
|
|
|
{ CR92, 0x0a }, { CR99, 0x28 }, { CR100, 0x00 },
|
|
|
|
|
{ CR101, 0x13 }, { CR102, 0x27 }, { CR106, 0x24 },
|
|
|
|
|
{ CR107, 0x2a }, { CR109, 0x09 }, { CR110, 0x13 },
|
|
|
|
|
{ CR111, 0x1f }, { CR112, 0x1f }, { CR113, 0x27 },
|
|
|
|
|
{ CR114, 0x27 },
|
|
|
|
|
/* for newest (3rd cut) AL2300 */
|
|
|
|
|
{ CR115, 0x24 },
|
|
|
|
|
{ CR116, 0x24 }, { CR117, 0xf4 }, { CR118, 0xfc },
|
|
|
|
|
{ CR119, 0x10 }, { CR120, 0x4f }, { CR121, 0x77 },
|
|
|
|
|
{ CR122, 0xe0 }, { CR137, 0x88 }, { CR252, 0xff },
|
|
|
|
|
{ CR253, 0xff },
|
2007-03-12 02:54:28 +07:00
|
|
|
};
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2007-03-12 02:54:28 +07:00
|
|
|
static const struct zd_ioreq16 ioreqs_pll[] = {
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
/* shdnb(PLL_ON)=0 */
|
|
|
|
|
{ CR251, 0x2f },
|
|
|
|
|
/* shdnb(PLL_ON)=1 */
|
|
|
|
|
{ CR251, 0x3f },
|
|
|
|
|
{ CR138, 0x28 }, { CR203, 0x06 },
|
|
|
|
|
};
|
|
|
|
|
|
2007-03-12 02:54:28 +07:00
|
|
|
static const u32 rv1[] = {
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
/* Channel 1 */
|
|
|
|
|
0x03f790,
|
|
|
|
|
0x033331,
|
|
|
|
|
0x00000d,
|
|
|
|
|
|
|
|
|
|
0x0b3331,
|
|
|
|
|
0x03b812,
|
|
|
|
|
0x00fff3,
|
2007-03-12 02:54:28 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const u32 rv2[] = {
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
0x000da4,
|
|
|
|
|
0x0f4dc5, /* fix freq shift, 0x04edc5 */
|
|
|
|
|
0x0805b6,
|
|
|
|
|
0x011687,
|
|
|
|
|
0x000688,
|
|
|
|
|
0x0403b9, /* external control TX power (CR31) */
|
|
|
|
|
0x00dbba,
|
|
|
|
|
0x00099b,
|
|
|
|
|
0x0bdffc,
|
|
|
|
|
0x00000d,
|
|
|
|
|
0x00500f,
|
2007-03-12 02:54:28 +07:00
|
|
|
};
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
|
2007-03-12 02:54:28 +07:00
|
|
|
static const u32 rv3[] = {
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
0x00d00f,
|
|
|
|
|
0x004c0f,
|
|
|
|
|
0x00540f,
|
|
|
|
|
0x00700f,
|
|
|
|
|
0x00500f,
|
|
|
|
|
};
|
|
|
|
|
|
2007-03-12 02:54:28 +07:00
|
|
|
r = zd_iowrite16a_locked(chip, ioreqs_init, ARRAY_SIZE(ioreqs_init));
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
|
2007-07-02 00:22:04 +07:00
|
|
|
if (IS_AL2230S(chip)) {
|
2007-03-12 02:54:28 +07:00
|
|
|
r = zd_iowrite16a_locked(chip, ioreqs_init_al2230s,
|
|
|
|
|
ARRAY_SIZE(ioreqs_init_al2230s));
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
r = zd_rfwritev_locked(chip, rv1, ARRAY_SIZE(rv1), RF_RV_BITS);
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
|
|
|
|
|
/* improve band edge for AL2230S */
|
2007-07-02 00:22:04 +07:00
|
|
|
if (IS_AL2230S(chip))
|
2007-03-12 02:54:28 +07:00
|
|
|
r = zd_rfwrite_locked(chip, 0x000824, RF_RV_BITS);
|
|
|
|
|
else
|
|
|
|
|
r = zd_rfwrite_locked(chip, 0x0005a4, RF_RV_BITS);
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
|
|
|
|
|
r = zd_rfwritev_locked(chip, rv2, ARRAY_SIZE(rv2), RF_RV_BITS);
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
|
|
|
|
|
r = zd_iowrite16a_locked(chip, ioreqs_pll, ARRAY_SIZE(ioreqs_pll));
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
|
|
|
|
|
r = zd_rfwritev_locked(chip, rv3, ARRAY_SIZE(rv3), RF_RV_BITS);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int zd1211b_al2230_init_hw(struct zd_rf *rf)
|
|
|
|
|
{
|
|
|
|
|
int r;
|
|
|
|
|
struct zd_chip *chip = zd_rf_to_chip(rf);
|
|
|
|
|
|
|
|
|
|
static const struct zd_ioreq16 ioreqs1[] = {
|
|
|
|
|
{ CR10, 0x89 }, { CR15, 0x20 },
|
|
|
|
|
{ CR17, 0x2B }, /* for newest(3rd cut) AL2230 */
|
|
|
|
|
{ CR23, 0x40 }, { CR24, 0x20 }, { CR26, 0x93 },
|
|
|
|
|
{ CR28, 0x3e }, { CR29, 0x00 },
|
|
|
|
|
{ CR33, 0x28 }, /* 5621 */
|
|
|
|
|
{ CR34, 0x30 },
|
|
|
|
|
{ CR35, 0x3e }, /* for newest(3rd cut) AL2230 */
|
|
|
|
|
{ CR41, 0x24 }, { CR44, 0x32 },
|
|
|
|
|
{ CR46, 0x99 }, /* for newest(3rd cut) AL2230 */
|
|
|
|
|
{ CR47, 0x1e },
|
|
|
|
|
|
|
|
|
|
/* ZD1211B 05.06.10 */
|
2006-08-12 23:59:42 +07:00
|
|
|
{ CR48, 0x06 }, { CR49, 0xf9 }, { CR51, 0x01 },
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{ CR52, 0x80 }, { CR53, 0x7e }, { CR65, 0x00 },
|
|
|
|
|
{ CR66, 0x00 }, { CR67, 0x00 }, { CR68, 0x00 },
|
|
|
|
|
{ CR69, 0x28 },
|
|
|
|
|
|
|
|
|
|
{ CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 },
|
|
|
|
|
{ CR87, 0x0a }, { CR89, 0x04 },
|
|
|
|
|
{ CR91, 0x00 }, /* 5621 */
|
|
|
|
|
{ CR92, 0x0a },
|
|
|
|
|
{ CR98, 0x8d }, /* 4804, for 1212 new algorithm */
|
|
|
|
|
{ CR99, 0x00 }, /* 5621 */
|
|
|
|
|
{ CR101, 0x13 }, { CR102, 0x27 },
|
|
|
|
|
{ CR106, 0x24 }, /* for newest(3rd cut) AL2230 */
|
|
|
|
|
{ CR107, 0x2a },
|
|
|
|
|
{ CR109, 0x13 }, /* 4804, for 1212 new algorithm */
|
|
|
|
|
{ CR110, 0x1f }, /* 4804, for 1212 new algorithm */
|
|
|
|
|
{ CR111, 0x1f }, { CR112, 0x1f }, { CR113, 0x27 },
|
|
|
|
|
{ CR114, 0x27 },
|
|
|
|
|
{ CR115, 0x26 }, /* 24->26 at 4902 for newest(3rd cut) AL2230 */
|
|
|
|
|
{ CR116, 0x24 },
|
|
|
|
|
{ CR117, 0xfa }, /* for 1211b */
|
|
|
|
|
{ CR118, 0xfa }, /* for 1211b */
|
|
|
|
|
{ CR119, 0x10 },
|
|
|
|
|
{ CR120, 0x4f },
|
|
|
|
|
{ CR121, 0x6c }, /* for 1211b */
|
|
|
|
|
{ CR122, 0xfc }, /* E0->FC at 4902 */
|
|
|
|
|
{ CR123, 0x57 }, /* 5623 */
|
|
|
|
|
{ CR125, 0xad }, /* 4804, for 1212 new algorithm */
|
|
|
|
|
{ CR126, 0x6c }, /* 5614 */
|
|
|
|
|
{ CR127, 0x03 }, /* 4804, for 1212 new algorithm */
|
|
|
|
|
{ CR137, 0x50 }, /* 5614 */
|
|
|
|
|
{ CR138, 0xa8 },
|
|
|
|
|
{ CR144, 0xac }, /* 5621 */
|
2006-08-12 23:59:42 +07:00
|
|
|
{ CR150, 0x0d }, { CR252, 0x34 }, { CR253, 0x34 },
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const u32 rv1[] = {
|
2006-08-12 23:59:42 +07:00
|
|
|
0x8cccd0,
|
|
|
|
|
0x481dc0,
|
|
|
|
|
0xcfff00,
|
|
|
|
|
0x25a000,
|
2007-03-12 02:54:28 +07:00
|
|
|
};
|
2006-08-12 23:59:42 +07:00
|
|
|
|
2007-03-12 02:54:28 +07:00
|
|
|
static const u32 rv2[] = {
|
2006-08-12 23:59:42 +07:00
|
|
|
/* To improve AL2230 yield, improve phase noise, 4713 */
|
|
|
|
|
0x25a000,
|
|
|
|
|
0xa3b2f0,
|
|
|
|
|
|
|
|
|
|
0x6da010, /* Reg6 update for MP versio */
|
|
|
|
|
0xe36280, /* Modified by jxiao for Bor-Chin on 2004/08/02 */
|
|
|
|
|
0x116000,
|
|
|
|
|
0x9dc020, /* External control TX power (CR31) */
|
|
|
|
|
0x5ddb00, /* RegA update for MP version */
|
|
|
|
|
0xd99000, /* RegB update for MP version */
|
|
|
|
|
0x3ffbd0, /* RegC update for MP version */
|
|
|
|
|
0xb00000, /* RegD update for MP version */
|
|
|
|
|
|
|
|
|
|
/* improve phase noise and remove phase calibration,4713 */
|
|
|
|
|
0xf01a00,
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct zd_ioreq16 ioreqs2[] = {
|
2006-08-12 23:59:42 +07:00
|
|
|
{ CR251, 0x2f }, /* shdnb(PLL_ON)=0 */
|
|
|
|
|
{ CR251, 0x7f }, /* shdnb(PLL_ON)=1 */
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
};
|
|
|
|
|
|
2007-03-12 02:54:28 +07:00
|
|
|
static const u32 rv3[] = {
|
2006-08-12 23:59:42 +07:00
|
|
|
/* To improve AL2230 yield, 4713 */
|
|
|
|
|
0xf01b00,
|
|
|
|
|
0xf01e00,
|
|
|
|
|
0xf01a00,
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct zd_ioreq16 ioreqs3[] = {
|
2006-08-12 23:59:42 +07:00
|
|
|
/* related to 6M band edge patching, happens unconditionally */
|
|
|
|
|
{ CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 },
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
};
|
|
|
|
|
|
2006-08-12 23:59:42 +07:00
|
|
|
r = zd_iowrite16a_locked(chip, zd1211b_ioreqs_shared_1,
|
|
|
|
|
ARRAY_SIZE(zd1211b_ioreqs_shared_1));
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
r = zd_iowrite16a_locked(chip, ioreqs1, ARRAY_SIZE(ioreqs1));
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
2007-03-12 02:54:28 +07:00
|
|
|
|
2007-07-02 00:22:04 +07:00
|
|
|
if (IS_AL2230S(chip)) {
|
2007-03-12 02:54:28 +07:00
|
|
|
r = zd_iowrite16a_locked(chip, ioreqs_init_al2230s,
|
|
|
|
|
ARRAY_SIZE(ioreqs_init_al2230s));
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
}
|
|
|
|
|
|
2006-08-12 23:59:42 +07:00
|
|
|
r = zd_rfwritev_cr_locked(chip, zd1211b_al2230_table[0], 3);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (r)
|
|
|
|
|
return r;
|
2006-08-12 23:59:42 +07:00
|
|
|
r = zd_rfwritev_cr_locked(chip, rv1, ARRAY_SIZE(rv1));
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (r)
|
|
|
|
|
return r;
|
2007-03-12 02:54:28 +07:00
|
|
|
|
2007-07-02 00:22:04 +07:00
|
|
|
if (IS_AL2230S(chip))
|
2007-03-12 02:54:28 +07:00
|
|
|
r = zd_rfwrite_locked(chip, 0x241000, RF_RV_BITS);
|
|
|
|
|
else
|
|
|
|
|
r = zd_rfwrite_locked(chip, 0x25a000, RF_RV_BITS);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (r)
|
|
|
|
|
return r;
|
2007-03-12 02:54:28 +07:00
|
|
|
|
2006-08-12 23:59:42 +07:00
|
|
|
r = zd_rfwritev_cr_locked(chip, rv2, ARRAY_SIZE(rv2));
|
2007-03-12 02:54:28 +07:00
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
r = zd_iowrite16a_locked(chip, ioreqs2, ARRAY_SIZE(ioreqs2));
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
r = zd_rfwritev_cr_locked(chip, rv3, ARRAY_SIZE(rv3));
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (r)
|
|
|
|
|
return r;
|
2006-08-12 23:59:42 +07:00
|
|
|
r = zd_iowrite16a_locked(chip, ioreqs3, ARRAY_SIZE(ioreqs3));
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
if (r)
|
|
|
|
|
return r;
|
2006-08-12 23:59:42 +07:00
|
|
|
return zd1211b_al2230_finalize_rf(chip);
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
}
|
|
|
|
|
|
2006-08-12 23:59:42 +07:00
|
|
|
static int zd1211_al2230_set_channel(struct zd_rf *rf, u8 channel)
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
{
|
|
|
|
|
int r;
|
2006-08-12 23:59:42 +07:00
|
|
|
const u32 *rv = zd1211_al2230_table[channel-1];
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
struct zd_chip *chip = zd_rf_to_chip(rf);
|
|
|
|
|
static const struct zd_ioreq16 ioreqs[] = {
|
|
|
|
|
{ CR138, 0x28 },
|
|
|
|
|
{ CR203, 0x06 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
r = zd_rfwritev_locked(chip, rv, 3, RF_RV_BITS);
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
|
|
|
|
|
}
|
|
|
|
|
|
2006-08-12 23:59:42 +07:00
|
|
|
static int zd1211b_al2230_set_channel(struct zd_rf *rf, u8 channel)
|
|
|
|
|
{
|
|
|
|
|
int r;
|
|
|
|
|
const u32 *rv = zd1211b_al2230_table[channel-1];
|
|
|
|
|
struct zd_chip *chip = zd_rf_to_chip(rf);
|
|
|
|
|
|
|
|
|
|
r = zd_iowrite16a_locked(chip, zd1211b_ioreqs_shared_1,
|
|
|
|
|
ARRAY_SIZE(zd1211b_ioreqs_shared_1));
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
|
|
|
|
|
r = zd_rfwritev_cr_locked(chip, rv, 3);
|
|
|
|
|
if (r)
|
|
|
|
|
return r;
|
|
|
|
|
|
|
|
|
|
return zd1211b_al2230_finalize_rf(chip);
|
|
|
|
|
}
|
|
|
|
|
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
static int zd1211_al2230_switch_radio_on(struct zd_rf *rf)
|
|
|
|
|
{
|
|
|
|
|
struct zd_chip *chip = zd_rf_to_chip(rf);
|
|
|
|
|
static const struct zd_ioreq16 ioreqs[] = {
|
|
|
|
|
{ CR11, 0x00 },
|
|
|
|
|
{ CR251, 0x3f },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int zd1211b_al2230_switch_radio_on(struct zd_rf *rf)
|
|
|
|
|
{
|
|
|
|
|
struct zd_chip *chip = zd_rf_to_chip(rf);
|
|
|
|
|
static const struct zd_ioreq16 ioreqs[] = {
|
|
|
|
|
{ CR11, 0x00 },
|
|
|
|
|
{ CR251, 0x7f },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int al2230_switch_radio_off(struct zd_rf *rf)
|
|
|
|
|
{
|
|
|
|
|
struct zd_chip *chip = zd_rf_to_chip(rf);
|
|
|
|
|
static const struct zd_ioreq16 ioreqs[] = {
|
|
|
|
|
{ CR11, 0x04 },
|
|
|
|
|
{ CR251, 0x2f },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int zd_rf_init_al2230(struct zd_rf *rf)
|
|
|
|
|
{
|
|
|
|
|
struct zd_chip *chip = zd_rf_to_chip(rf);
|
|
|
|
|
|
|
|
|
|
rf->switch_radio_off = al2230_switch_radio_off;
|
2007-07-02 00:22:32 +07:00
|
|
|
if (zd_chip_is_zd1211b(chip)) {
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
rf->init_hw = zd1211b_al2230_init_hw;
|
2006-08-12 23:59:42 +07:00
|
|
|
rf->set_channel = zd1211b_al2230_set_channel;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
rf->switch_radio_on = zd1211b_al2230_switch_radio_on;
|
|
|
|
|
} else {
|
|
|
|
|
rf->init_hw = zd1211_al2230_init_hw;
|
2006-08-12 23:59:42 +07:00
|
|
|
rf->set_channel = zd1211_al2230_set_channel;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
rf->switch_radio_on = zd1211_al2230_switch_radio_on;
|
|
|
|
|
}
|
2007-04-07 22:00:15 +07:00
|
|
|
rf->patch_6m_band_edge = zd_rf_generic_patch_6m;
|
2007-05-24 07:07:15 +07:00
|
|
|
rf->patch_cck_gain = 1;
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
|
|
|
return 0;
|
|
|
|
|
}
|