linux_dsm_epyc7002/arch/s390/kvm/kvm-s390.c

2654 lines
66 KiB
C
Raw Normal View History

/*
* hosting zSeries kernel virtual machines
*
* Copyright IBM Corp. 2008, 2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
* as published by the Free Software Foundation.
*
* Author(s): Carsten Otte <cotte@de.ibm.com>
* Christian Borntraeger <borntraeger@de.ibm.com>
* Heiko Carstens <heiko.carstens@de.ibm.com>
* Christian Ehrhardt <ehrhardt@de.ibm.com>
* Jason J. Herne <jjherne@us.ibm.com>
*/
#include <linux/compiler.h>
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/hrtimer.h>
#include <linux/init.h>
#include <linux/kvm.h>
#include <linux/kvm_host.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/slab.h>
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
#include <linux/timer.h>
#include <linux/vmalloc.h>
#include <asm/asm-offsets.h>
#include <asm/lowcore.h>
#include <asm/pgtable.h>
#include <asm/nmi.h>
#include <asm/switch_to.h>
#include <asm/isc.h>
#include <asm/sclp.h>
#include "kvm-s390.h"
#include "gaccess.h"
#define KMSG_COMPONENT "kvm-s390"
#undef pr_fmt
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#define CREATE_TRACE_POINTS
#include "trace.h"
#include "trace-s390.h"
#define MEM_OP_MAX_SIZE 65536 /* Maximum transfer size for KVM_S390_MEM_OP */
#define LOCAL_IRQS 32
#define VCPU_IRQS_MAX_BUF (sizeof(struct kvm_s390_irq) * \
(KVM_MAX_VCPUS + LOCAL_IRQS))
#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
struct kvm_stats_debugfs_item debugfs_entries[] = {
{ "userspace_handled", VCPU_STAT(exit_userspace) },
{ "exit_null", VCPU_STAT(exit_null) },
{ "exit_validity", VCPU_STAT(exit_validity) },
{ "exit_stop_request", VCPU_STAT(exit_stop_request) },
{ "exit_external_request", VCPU_STAT(exit_external_request) },
{ "exit_external_interrupt", VCPU_STAT(exit_external_interrupt) },
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
{ "exit_instruction", VCPU_STAT(exit_instruction) },
{ "exit_program_interruption", VCPU_STAT(exit_program_interruption) },
{ "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) },
kvm: add halt_poll_ns module parameter This patch introduces a new module parameter for the KVM module; when it is present, KVM attempts a bit of polling on every HLT before scheduling itself out via kvm_vcpu_block. This parameter helps a lot for latency-bound workloads---in particular I tested it with O_DSYNC writes with a battery-backed disk in the host. In this case, writes are fast (because the data doesn't have to go all the way to the platters) but they cannot be merged by either the host or the guest. KVM's performance here is usually around 30% of bare metal, or 50% if you use cache=directsync or cache=writethrough (these parameters avoid that the guest sends pointless flush requests, and at the same time they are not slow because of the battery-backed cache). The bad performance happens because on every halt the host CPU decides to halt itself too. When the interrupt comes, the vCPU thread is then migrated to a new physical CPU, and in general the latency is horrible because the vCPU thread has to be scheduled back in. With this patch performance reaches 60-65% of bare metal and, more important, 99% of what you get if you use idle=poll in the guest. This means that the tunable gets rid of this particular bottleneck, and more work can be done to improve performance in the kernel or QEMU. Of course there is some price to pay; every time an otherwise idle vCPUs is interrupted by an interrupt, it will poll unnecessarily and thus impose a little load on the host. The above results were obtained with a mostly random value of the parameter (500000), and the load was around 1.5-2.5% CPU usage on one of the host's core for each idle guest vCPU. The patch also adds a new stat, /sys/kernel/debug/kvm/halt_successful_poll, that can be used to tune the parameter. It counts how many HLT instructions received an interrupt during the polling period; each successful poll avoids that Linux schedules the VCPU thread out and back in, and may also avoid a likely trip to C1 and back for the physical CPU. While the VM is idle, a Linux 4 VCPU VM halts around 10 times per second. Of these halts, almost all are failed polls. During the benchmark, instead, basically all halts end within the polling period, except a more or less constant stream of 50 per second coming from vCPUs that are not running the benchmark. The wasted time is thus very low. Things may be slightly different for Windows VMs, which have a ~10 ms timer tick. The effect is also visible on Marcelo's recently-introduced latency test for the TSC deadline timer. Though of course a non-RT kernel has awful latency bounds, the latency of the timer is around 8000-10000 clock cycles compared to 20000-120000 without setting halt_poll_ns. For the TSC deadline timer, thus, the effect is both a smaller average latency and a smaller variance. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-05 00:20:58 +07:00
{ "halt_successful_poll", VCPU_STAT(halt_successful_poll) },
{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
{ "instruction_lctlg", VCPU_STAT(instruction_lctlg) },
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
{ "instruction_lctl", VCPU_STAT(instruction_lctl) },
{ "instruction_stctl", VCPU_STAT(instruction_stctl) },
{ "instruction_stctg", VCPU_STAT(instruction_stctg) },
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
{ "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) },
{ "deliver_external_call", VCPU_STAT(deliver_external_call) },
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
{ "deliver_service_signal", VCPU_STAT(deliver_service_signal) },
{ "deliver_virtio_interrupt", VCPU_STAT(deliver_virtio_interrupt) },
{ "deliver_stop_signal", VCPU_STAT(deliver_stop_signal) },
{ "deliver_prefix_signal", VCPU_STAT(deliver_prefix_signal) },
{ "deliver_restart_signal", VCPU_STAT(deliver_restart_signal) },
{ "deliver_program_interruption", VCPU_STAT(deliver_program_int) },
{ "exit_wait_state", VCPU_STAT(exit_wait_state) },
{ "instruction_pfmf", VCPU_STAT(instruction_pfmf) },
{ "instruction_stidp", VCPU_STAT(instruction_stidp) },
{ "instruction_spx", VCPU_STAT(instruction_spx) },
{ "instruction_stpx", VCPU_STAT(instruction_stpx) },
{ "instruction_stap", VCPU_STAT(instruction_stap) },
{ "instruction_storage_key", VCPU_STAT(instruction_storage_key) },
{ "instruction_ipte_interlock", VCPU_STAT(instruction_ipte_interlock) },
{ "instruction_stsch", VCPU_STAT(instruction_stsch) },
{ "instruction_chsc", VCPU_STAT(instruction_chsc) },
{ "instruction_essa", VCPU_STAT(instruction_essa) },
{ "instruction_stsi", VCPU_STAT(instruction_stsi) },
{ "instruction_stfl", VCPU_STAT(instruction_stfl) },
{ "instruction_tprot", VCPU_STAT(instruction_tprot) },
{ "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) },
{ "instruction_sigp_sense_running", VCPU_STAT(instruction_sigp_sense_running) },
{ "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) },
{ "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) },
{ "instruction_sigp_cond_emergency", VCPU_STAT(instruction_sigp_cond_emergency) },
{ "instruction_sigp_start", VCPU_STAT(instruction_sigp_start) },
{ "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) },
{ "instruction_sigp_stop_store_status", VCPU_STAT(instruction_sigp_stop_store_status) },
{ "instruction_sigp_store_status", VCPU_STAT(instruction_sigp_store_status) },
{ "instruction_sigp_store_adtl_status", VCPU_STAT(instruction_sigp_store_adtl_status) },
{ "instruction_sigp_set_arch", VCPU_STAT(instruction_sigp_arch) },
{ "instruction_sigp_set_prefix", VCPU_STAT(instruction_sigp_prefix) },
{ "instruction_sigp_restart", VCPU_STAT(instruction_sigp_restart) },
{ "instruction_sigp_cpu_reset", VCPU_STAT(instruction_sigp_cpu_reset) },
{ "instruction_sigp_init_cpu_reset", VCPU_STAT(instruction_sigp_init_cpu_reset) },
{ "instruction_sigp_unknown", VCPU_STAT(instruction_sigp_unknown) },
{ "diagnose_10", VCPU_STAT(diagnose_10) },
{ "diagnose_44", VCPU_STAT(diagnose_44) },
{ "diagnose_9c", VCPU_STAT(diagnose_9c) },
{ NULL }
};
/* upper facilities limit for kvm */
unsigned long kvm_s390_fac_list_mask[] = {
KVM: s390: enable more features that need no hypervisor changes After some review about what these facilities do, the following facilities will work under KVM and can, therefore, be reported to the guest if the cpu model and the host cpu provide this bit. There are plans underway to make the whole bit thing more readable, but its not yet finished. So here are some last bit changes and we enhance the KVM mask with: 9 The sense-running-status facility is installed in the z/Architecture architectural mode. ---> handled by SIE or KVM 10 The conditional-SSKE facility is installed in the z/Architecture architectural mode. ---> handled by SIE. KVM will retry SIE 13 The IPTE-range facility is installed in the z/Architecture architectural mode. ---> handled by SIE. KVM will retry SIE 36 The enhanced-monitor facility is installed in the z/Architecture architectural mode. ---> handled by SIE 47 The CMPSC-enhancement facility is installed in the z/Architecture architectural mode. ---> handled by SIE 48 The decimal-floating-point zoned-conversion facility is installed in the z/Architecture architectural mode. ---> handled by SIE 49 The execution-hint, load-and-trap, miscellaneous- instruction-extensions and processor-assist ---> handled by SIE 51 The local-TLB-clearing facility is installed in the z/Architecture architectural mode. ---> handled by SIE 52 The interlocked-access facility 2 is installed. ---> handled by SIE 53 The load/store-on-condition facility 2 and load-and- zero-rightmost-byte facility are installed in the z/Architecture architectural mode. ---> handled by SIE 57 The message-security-assist-extension-5 facility is installed in the z/Architecture architectural mode. ---> handled by SIE 66 The reset-reference-bits-multiple facility is installed in the z/Architecture architectural mode. ---> handled by SIE. KVM will retry SIE 80 The decimal-floating-point packed-conversion facility is installed in the z/Architecture architectural mode. ---> handled by SIE Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Michael Mueller <mimu@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-18 19:54:31 +07:00
0xffe6fffbfcfdfc40UL,
0x005e800000000000UL,
};
unsigned long kvm_s390_fac_list_mask_size(void)
{
BUILD_BUG_ON(ARRAY_SIZE(kvm_s390_fac_list_mask) > S390_ARCH_FAC_MASK_SIZE_U64);
return ARRAY_SIZE(kvm_s390_fac_list_mask);
}
static struct gmap_notifier gmap_notifier;
/* Section: not file related */
int kvm_arch_hardware_enable(void)
{
/* every s390 is virtualization enabled ;-) */
return 0;
}
static void kvm_gmap_notifier(struct gmap *gmap, unsigned long address);
int kvm_arch_hardware_setup(void)
{
gmap_notifier.notifier_call = kvm_gmap_notifier;
gmap_register_ipte_notifier(&gmap_notifier);
return 0;
}
void kvm_arch_hardware_unsetup(void)
{
gmap_unregister_ipte_notifier(&gmap_notifier);
}
int kvm_arch_init(void *opaque)
{
/* Register floating interrupt controller interface. */
return kvm_register_device_ops(&kvm_flic_ops, KVM_DEV_TYPE_FLIC);
}
/* Section: device related */
long kvm_arch_dev_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
if (ioctl == KVM_S390_ENABLE_SIE)
return s390_enable_sie();
return -EINVAL;
}
int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
{
int r;
switch (ext) {
case KVM_CAP_S390_PSW:
case KVM_CAP_S390_GMAP:
case KVM_CAP_SYNC_MMU:
#ifdef CONFIG_KVM_S390_UCONTROL
case KVM_CAP_S390_UCONTROL:
#endif
case KVM_CAP_ASYNC_PF:
case KVM_CAP_SYNC_REGS:
case KVM_CAP_ONE_REG:
case KVM_CAP_ENABLE_CAP:
case KVM_CAP_S390_CSS_SUPPORT:
case KVM_CAP_IOEVENTFD:
case KVM_CAP_DEVICE_CTRL:
case KVM_CAP_ENABLE_CAP_VM:
case KVM_CAP_S390_IRQCHIP:
case KVM_CAP_VM_ATTRIBUTES:
case KVM_CAP_MP_STATE:
case KVM_CAP_S390_INJECT_IRQ:
case KVM_CAP_S390_USER_SIGP:
case KVM_CAP_S390_USER_STSI:
case KVM_CAP_S390_SKEYS:
case KVM_CAP_S390_IRQ_STATE:
r = 1;
break;
case KVM_CAP_S390_MEM_OP:
r = MEM_OP_MAX_SIZE;
break;
case KVM_CAP_NR_VCPUS:
case KVM_CAP_MAX_VCPUS:
r = KVM_MAX_VCPUS;
break;
case KVM_CAP_NR_MEMSLOTS:
r = KVM_USER_MEM_SLOTS;
break;
case KVM_CAP_S390_COW:
s390/mm: implement software dirty bits The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 19:17:37 +07:00
r = MACHINE_HAS_ESOP;
break;
case KVM_CAP_S390_VECTOR_REGISTERS:
r = MACHINE_HAS_VX;
break;
default:
r = 0;
}
return r;
}
static void kvm_s390_sync_dirty_log(struct kvm *kvm,
struct kvm_memory_slot *memslot)
{
gfn_t cur_gfn, last_gfn;
unsigned long address;
struct gmap *gmap = kvm->arch.gmap;
down_read(&gmap->mm->mmap_sem);
/* Loop over all guest pages */
last_gfn = memslot->base_gfn + memslot->npages;
for (cur_gfn = memslot->base_gfn; cur_gfn <= last_gfn; cur_gfn++) {
address = gfn_to_hva_memslot(memslot, cur_gfn);
if (gmap_test_and_clear_dirty(address, gmap))
mark_page_dirty(kvm, cur_gfn);
}
up_read(&gmap->mm->mmap_sem);
}
/* Section: vm related */
/*
* Get (and clear) the dirty memory log for a memory slot.
*/
int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
struct kvm_dirty_log *log)
{
int r;
unsigned long n;
struct kvm_memslots *slots;
struct kvm_memory_slot *memslot;
int is_dirty = 0;
mutex_lock(&kvm->slots_lock);
r = -EINVAL;
if (log->slot >= KVM_USER_MEM_SLOTS)
goto out;
slots = kvm_memslots(kvm);
memslot = id_to_memslot(slots, log->slot);
r = -ENOENT;
if (!memslot->dirty_bitmap)
goto out;
kvm_s390_sync_dirty_log(kvm, memslot);
r = kvm_get_dirty_log(kvm, log, &is_dirty);
if (r)
goto out;
/* Clear the dirty log */
if (is_dirty) {
n = kvm_dirty_bitmap_bytes(memslot);
memset(memslot->dirty_bitmap, 0, n);
}
r = 0;
out:
mutex_unlock(&kvm->slots_lock);
return r;
}
static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
{
int r;
if (cap->flags)
return -EINVAL;
switch (cap->cap) {
case KVM_CAP_S390_IRQCHIP:
kvm->arch.use_irqchip = 1;
r = 0;
break;
case KVM_CAP_S390_USER_SIGP:
kvm->arch.user_sigp = 1;
r = 0;
break;
case KVM_CAP_S390_VECTOR_REGISTERS:
if (MACHINE_HAS_VX) {
set_kvm_facility(kvm->arch.model.fac->mask, 129);
set_kvm_facility(kvm->arch.model.fac->list, 129);
r = 0;
} else
r = -EINVAL;
break;
case KVM_CAP_S390_USER_STSI:
kvm->arch.user_stsi = 1;
r = 0;
break;
default:
r = -EINVAL;
break;
}
return r;
}
static int kvm_s390_get_mem_control(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret;
switch (attr->attr) {
case KVM_S390_VM_MEM_LIMIT_SIZE:
ret = 0;
if (put_user(kvm->arch.gmap->asce_end, (u64 __user *)attr->addr))
ret = -EFAULT;
break;
default:
ret = -ENXIO;
break;
}
return ret;
}
static int kvm_s390_set_mem_control(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret;
unsigned int idx;
switch (attr->attr) {
case KVM_S390_VM_MEM_ENABLE_CMMA:
ret = -EBUSY;
mutex_lock(&kvm->lock);
if (atomic_read(&kvm->online_vcpus) == 0) {
kvm->arch.use_cmma = 1;
ret = 0;
}
mutex_unlock(&kvm->lock);
break;
case KVM_S390_VM_MEM_CLR_CMMA:
mutex_lock(&kvm->lock);
idx = srcu_read_lock(&kvm->srcu);
s390_reset_cmma(kvm->arch.gmap->mm);
srcu_read_unlock(&kvm->srcu, idx);
mutex_unlock(&kvm->lock);
ret = 0;
break;
case KVM_S390_VM_MEM_LIMIT_SIZE: {
unsigned long new_limit;
if (kvm_is_ucontrol(kvm))
return -EINVAL;
if (get_user(new_limit, (u64 __user *)attr->addr))
return -EFAULT;
if (new_limit > kvm->arch.gmap->asce_end)
return -E2BIG;
ret = -EBUSY;
mutex_lock(&kvm->lock);
if (atomic_read(&kvm->online_vcpus) == 0) {
/* gmap_alloc will round the limit up */
struct gmap *new = gmap_alloc(current->mm, new_limit);
if (!new) {
ret = -ENOMEM;
} else {
gmap_free(kvm->arch.gmap);
new->private = kvm;
kvm->arch.gmap = new;
ret = 0;
}
}
mutex_unlock(&kvm->lock);
break;
}
default:
ret = -ENXIO;
break;
}
return ret;
}
static void kvm_s390_vcpu_crypto_setup(struct kvm_vcpu *vcpu);
static int kvm_s390_vm_set_crypto(struct kvm *kvm, struct kvm_device_attr *attr)
{
struct kvm_vcpu *vcpu;
int i;
if (!test_kvm_facility(kvm, 76))
return -EINVAL;
mutex_lock(&kvm->lock);
switch (attr->attr) {
case KVM_S390_VM_CRYPTO_ENABLE_AES_KW:
get_random_bytes(
kvm->arch.crypto.crycb->aes_wrapping_key_mask,
sizeof(kvm->arch.crypto.crycb->aes_wrapping_key_mask));
kvm->arch.crypto.aes_kw = 1;
break;
case KVM_S390_VM_CRYPTO_ENABLE_DEA_KW:
get_random_bytes(
kvm->arch.crypto.crycb->dea_wrapping_key_mask,
sizeof(kvm->arch.crypto.crycb->dea_wrapping_key_mask));
kvm->arch.crypto.dea_kw = 1;
break;
case KVM_S390_VM_CRYPTO_DISABLE_AES_KW:
kvm->arch.crypto.aes_kw = 0;
memset(kvm->arch.crypto.crycb->aes_wrapping_key_mask, 0,
sizeof(kvm->arch.crypto.crycb->aes_wrapping_key_mask));
break;
case KVM_S390_VM_CRYPTO_DISABLE_DEA_KW:
kvm->arch.crypto.dea_kw = 0;
memset(kvm->arch.crypto.crycb->dea_wrapping_key_mask, 0,
sizeof(kvm->arch.crypto.crycb->dea_wrapping_key_mask));
break;
default:
mutex_unlock(&kvm->lock);
return -ENXIO;
}
kvm_for_each_vcpu(i, vcpu, kvm) {
kvm_s390_vcpu_crypto_setup(vcpu);
exit_sie(vcpu);
}
mutex_unlock(&kvm->lock);
return 0;
}
static int kvm_s390_set_tod_high(struct kvm *kvm, struct kvm_device_attr *attr)
{
u8 gtod_high;
if (copy_from_user(&gtod_high, (void __user *)attr->addr,
sizeof(gtod_high)))
return -EFAULT;
if (gtod_high != 0)
return -EINVAL;
return 0;
}
static int kvm_s390_set_tod_low(struct kvm *kvm, struct kvm_device_attr *attr)
{
struct kvm_vcpu *cur_vcpu;
unsigned int vcpu_idx;
u64 host_tod, gtod;
int r;
if (copy_from_user(&gtod, (void __user *)attr->addr, sizeof(gtod)))
return -EFAULT;
r = store_tod_clock(&host_tod);
if (r)
return r;
mutex_lock(&kvm->lock);
kvm->arch.epoch = gtod - host_tod;
kvm_s390_vcpu_block_all(kvm);
kvm_for_each_vcpu(vcpu_idx, cur_vcpu, kvm)
cur_vcpu->arch.sie_block->epoch = kvm->arch.epoch;
kvm_s390_vcpu_unblock_all(kvm);
mutex_unlock(&kvm->lock);
return 0;
}
static int kvm_s390_set_tod(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret;
if (attr->flags)
return -EINVAL;
switch (attr->attr) {
case KVM_S390_VM_TOD_HIGH:
ret = kvm_s390_set_tod_high(kvm, attr);
break;
case KVM_S390_VM_TOD_LOW:
ret = kvm_s390_set_tod_low(kvm, attr);
break;
default:
ret = -ENXIO;
break;
}
return ret;
}
static int kvm_s390_get_tod_high(struct kvm *kvm, struct kvm_device_attr *attr)
{
u8 gtod_high = 0;
if (copy_to_user((void __user *)attr->addr, &gtod_high,
sizeof(gtod_high)))
return -EFAULT;
return 0;
}
static int kvm_s390_get_tod_low(struct kvm *kvm, struct kvm_device_attr *attr)
{
u64 host_tod, gtod;
int r;
r = store_tod_clock(&host_tod);
if (r)
return r;
gtod = host_tod + kvm->arch.epoch;
if (copy_to_user((void __user *)attr->addr, &gtod, sizeof(gtod)))
return -EFAULT;
return 0;
}
static int kvm_s390_get_tod(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret;
if (attr->flags)
return -EINVAL;
switch (attr->attr) {
case KVM_S390_VM_TOD_HIGH:
ret = kvm_s390_get_tod_high(kvm, attr);
break;
case KVM_S390_VM_TOD_LOW:
ret = kvm_s390_get_tod_low(kvm, attr);
break;
default:
ret = -ENXIO;
break;
}
return ret;
}
static int kvm_s390_set_processor(struct kvm *kvm, struct kvm_device_attr *attr)
{
struct kvm_s390_vm_cpu_processor *proc;
int ret = 0;
mutex_lock(&kvm->lock);
if (atomic_read(&kvm->online_vcpus)) {
ret = -EBUSY;
goto out;
}
proc = kzalloc(sizeof(*proc), GFP_KERNEL);
if (!proc) {
ret = -ENOMEM;
goto out;
}
if (!copy_from_user(proc, (void __user *)attr->addr,
sizeof(*proc))) {
memcpy(&kvm->arch.model.cpu_id, &proc->cpuid,
sizeof(struct cpuid));
kvm->arch.model.ibc = proc->ibc;
memcpy(kvm->arch.model.fac->list, proc->fac_list,
S390_ARCH_FAC_LIST_SIZE_BYTE);
} else
ret = -EFAULT;
kfree(proc);
out:
mutex_unlock(&kvm->lock);
return ret;
}
static int kvm_s390_set_cpu_model(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret = -ENXIO;
switch (attr->attr) {
case KVM_S390_VM_CPU_PROCESSOR:
ret = kvm_s390_set_processor(kvm, attr);
break;
}
return ret;
}
static int kvm_s390_get_processor(struct kvm *kvm, struct kvm_device_attr *attr)
{
struct kvm_s390_vm_cpu_processor *proc;
int ret = 0;
proc = kzalloc(sizeof(*proc), GFP_KERNEL);
if (!proc) {
ret = -ENOMEM;
goto out;
}
memcpy(&proc->cpuid, &kvm->arch.model.cpu_id, sizeof(struct cpuid));
proc->ibc = kvm->arch.model.ibc;
memcpy(&proc->fac_list, kvm->arch.model.fac->list, S390_ARCH_FAC_LIST_SIZE_BYTE);
if (copy_to_user((void __user *)attr->addr, proc, sizeof(*proc)))
ret = -EFAULT;
kfree(proc);
out:
return ret;
}
static int kvm_s390_get_machine(struct kvm *kvm, struct kvm_device_attr *attr)
{
struct kvm_s390_vm_cpu_machine *mach;
int ret = 0;
mach = kzalloc(sizeof(*mach), GFP_KERNEL);
if (!mach) {
ret = -ENOMEM;
goto out;
}
get_cpu_id((struct cpuid *) &mach->cpuid);
mach->ibc = sclp.ibc;
memcpy(&mach->fac_mask, kvm->arch.model.fac->mask,
S390_ARCH_FAC_LIST_SIZE_BYTE);
memcpy((unsigned long *)&mach->fac_list, S390_lowcore.stfle_fac_list,
S390_ARCH_FAC_LIST_SIZE_BYTE);
if (copy_to_user((void __user *)attr->addr, mach, sizeof(*mach)))
ret = -EFAULT;
kfree(mach);
out:
return ret;
}
static int kvm_s390_get_cpu_model(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret = -ENXIO;
switch (attr->attr) {
case KVM_S390_VM_CPU_PROCESSOR:
ret = kvm_s390_get_processor(kvm, attr);
break;
case KVM_S390_VM_CPU_MACHINE:
ret = kvm_s390_get_machine(kvm, attr);
break;
}
return ret;
}
static int kvm_s390_vm_set_attr(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret;
switch (attr->group) {
case KVM_S390_VM_MEM_CTRL:
ret = kvm_s390_set_mem_control(kvm, attr);
break;
case KVM_S390_VM_TOD:
ret = kvm_s390_set_tod(kvm, attr);
break;
case KVM_S390_VM_CPU_MODEL:
ret = kvm_s390_set_cpu_model(kvm, attr);
break;
case KVM_S390_VM_CRYPTO:
ret = kvm_s390_vm_set_crypto(kvm, attr);
break;
default:
ret = -ENXIO;
break;
}
return ret;
}
static int kvm_s390_vm_get_attr(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret;
switch (attr->group) {
case KVM_S390_VM_MEM_CTRL:
ret = kvm_s390_get_mem_control(kvm, attr);
break;
case KVM_S390_VM_TOD:
ret = kvm_s390_get_tod(kvm, attr);
break;
case KVM_S390_VM_CPU_MODEL:
ret = kvm_s390_get_cpu_model(kvm, attr);
break;
default:
ret = -ENXIO;
break;
}
return ret;
}
static int kvm_s390_vm_has_attr(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret;
switch (attr->group) {
case KVM_S390_VM_MEM_CTRL:
switch (attr->attr) {
case KVM_S390_VM_MEM_ENABLE_CMMA:
case KVM_S390_VM_MEM_CLR_CMMA:
case KVM_S390_VM_MEM_LIMIT_SIZE:
ret = 0;
break;
default:
ret = -ENXIO;
break;
}
break;
case KVM_S390_VM_TOD:
switch (attr->attr) {
case KVM_S390_VM_TOD_LOW:
case KVM_S390_VM_TOD_HIGH:
ret = 0;
break;
default:
ret = -ENXIO;
break;
}
break;
case KVM_S390_VM_CPU_MODEL:
switch (attr->attr) {
case KVM_S390_VM_CPU_PROCESSOR:
case KVM_S390_VM_CPU_MACHINE:
ret = 0;
break;
default:
ret = -ENXIO;
break;
}
break;
case KVM_S390_VM_CRYPTO:
switch (attr->attr) {
case KVM_S390_VM_CRYPTO_ENABLE_AES_KW:
case KVM_S390_VM_CRYPTO_ENABLE_DEA_KW:
case KVM_S390_VM_CRYPTO_DISABLE_AES_KW:
case KVM_S390_VM_CRYPTO_DISABLE_DEA_KW:
ret = 0;
break;
default:
ret = -ENXIO;
break;
}
break;
default:
ret = -ENXIO;
break;
}
return ret;
}
static long kvm_s390_get_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
{
uint8_t *keys;
uint64_t hva;
unsigned long curkey;
int i, r = 0;
if (args->flags != 0)
return -EINVAL;
/* Is this guest using storage keys? */
if (!mm_use_skey(current->mm))
return KVM_S390_GET_SKEYS_NONE;
/* Enforce sane limit on memory allocation */
if (args->count < 1 || args->count > KVM_S390_SKEYS_MAX)
return -EINVAL;
keys = kmalloc_array(args->count, sizeof(uint8_t),
GFP_KERNEL | __GFP_NOWARN);
if (!keys)
keys = vmalloc(sizeof(uint8_t) * args->count);
if (!keys)
return -ENOMEM;
for (i = 0; i < args->count; i++) {
hva = gfn_to_hva(kvm, args->start_gfn + i);
if (kvm_is_error_hva(hva)) {
r = -EFAULT;
goto out;
}
curkey = get_guest_storage_key(current->mm, hva);
if (IS_ERR_VALUE(curkey)) {
r = curkey;
goto out;
}
keys[i] = curkey;
}
r = copy_to_user((uint8_t __user *)args->skeydata_addr, keys,
sizeof(uint8_t) * args->count);
if (r)
r = -EFAULT;
out:
kvfree(keys);
return r;
}
static long kvm_s390_set_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
{
uint8_t *keys;
uint64_t hva;
int i, r = 0;
if (args->flags != 0)
return -EINVAL;
/* Enforce sane limit on memory allocation */
if (args->count < 1 || args->count > KVM_S390_SKEYS_MAX)
return -EINVAL;
keys = kmalloc_array(args->count, sizeof(uint8_t),
GFP_KERNEL | __GFP_NOWARN);
if (!keys)
keys = vmalloc(sizeof(uint8_t) * args->count);
if (!keys)
return -ENOMEM;
r = copy_from_user(keys, (uint8_t __user *)args->skeydata_addr,
sizeof(uint8_t) * args->count);
if (r) {
r = -EFAULT;
goto out;
}
/* Enable storage key handling for the guest */
s390_enable_skey();
for (i = 0; i < args->count; i++) {
hva = gfn_to_hva(kvm, args->start_gfn + i);
if (kvm_is_error_hva(hva)) {
r = -EFAULT;
goto out;
}
/* Lowest order bit is reserved */
if (keys[i] & 0x01) {
r = -EINVAL;
goto out;
}
r = set_guest_storage_key(current->mm, hva,
(unsigned long)keys[i], 0);
if (r)
goto out;
}
out:
kvfree(keys);
return r;
}
long kvm_arch_vm_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
struct kvm *kvm = filp->private_data;
void __user *argp = (void __user *)arg;
struct kvm_device_attr attr;
int r;
switch (ioctl) {
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
case KVM_S390_INTERRUPT: {
struct kvm_s390_interrupt s390int;
r = -EFAULT;
if (copy_from_user(&s390int, argp, sizeof(s390int)))
break;
r = kvm_s390_inject_vm(kvm, &s390int);
break;
}
case KVM_ENABLE_CAP: {
struct kvm_enable_cap cap;
r = -EFAULT;
if (copy_from_user(&cap, argp, sizeof(cap)))
break;
r = kvm_vm_ioctl_enable_cap(kvm, &cap);
break;
}
case KVM_CREATE_IRQCHIP: {
struct kvm_irq_routing_entry routing;
r = -EINVAL;
if (kvm->arch.use_irqchip) {
/* Set up dummy routing. */
memset(&routing, 0, sizeof(routing));
kvm_set_irq_routing(kvm, &routing, 0, 0);
r = 0;
}
break;
}
case KVM_SET_DEVICE_ATTR: {
r = -EFAULT;
if (copy_from_user(&attr, (void __user *)arg, sizeof(attr)))
break;
r = kvm_s390_vm_set_attr(kvm, &attr);
break;
}
case KVM_GET_DEVICE_ATTR: {
r = -EFAULT;
if (copy_from_user(&attr, (void __user *)arg, sizeof(attr)))
break;
r = kvm_s390_vm_get_attr(kvm, &attr);
break;
}
case KVM_HAS_DEVICE_ATTR: {
r = -EFAULT;
if (copy_from_user(&attr, (void __user *)arg, sizeof(attr)))
break;
r = kvm_s390_vm_has_attr(kvm, &attr);
break;
}
case KVM_S390_GET_SKEYS: {
struct kvm_s390_skeys args;
r = -EFAULT;
if (copy_from_user(&args, argp,
sizeof(struct kvm_s390_skeys)))
break;
r = kvm_s390_get_skeys(kvm, &args);
break;
}
case KVM_S390_SET_SKEYS: {
struct kvm_s390_skeys args;
r = -EFAULT;
if (copy_from_user(&args, argp,
sizeof(struct kvm_s390_skeys)))
break;
r = kvm_s390_set_skeys(kvm, &args);
break;
}
default:
r = -ENOTTY;
}
return r;
}
static int kvm_s390_query_ap_config(u8 *config)
{
u32 fcn_code = 0x04000000UL;
u32 cc = 0;
memset(config, 0, 128);
asm volatile(
"lgr 0,%1\n"
"lgr 2,%2\n"
".long 0xb2af0000\n" /* PQAP(QCI) */
"0: ipm %0\n"
"srl %0,28\n"
"1:\n"
EX_TABLE(0b, 1b)
: "+r" (cc)
: "r" (fcn_code), "r" (config)
: "cc", "0", "2", "memory"
);
return cc;
}
static int kvm_s390_apxa_installed(void)
{
u8 config[128];
int cc;
if (test_facility(2) && test_facility(12)) {
cc = kvm_s390_query_ap_config(config);
if (cc)
pr_err("PQAP(QCI) failed with cc=%d", cc);
else
return config[0] & 0x40;
}
return 0;
}
static void kvm_s390_set_crycb_format(struct kvm *kvm)
{
kvm->arch.crypto.crycbd = (__u32)(unsigned long) kvm->arch.crypto.crycb;
if (kvm_s390_apxa_installed())
kvm->arch.crypto.crycbd |= CRYCB_FORMAT2;
else
kvm->arch.crypto.crycbd |= CRYCB_FORMAT1;
}
static void kvm_s390_get_cpu_id(struct cpuid *cpu_id)
{
get_cpu_id(cpu_id);
cpu_id->version = 0xff;
}
static int kvm_s390_crypto_init(struct kvm *kvm)
{
if (!test_kvm_facility(kvm, 76))
return 0;
kvm->arch.crypto.crycb = kzalloc(sizeof(*kvm->arch.crypto.crycb),
GFP_KERNEL | GFP_DMA);
if (!kvm->arch.crypto.crycb)
return -ENOMEM;
kvm_s390_set_crycb_format(kvm);
/* Enable AES/DEA protected key functions by default */
kvm->arch.crypto.aes_kw = 1;
kvm->arch.crypto.dea_kw = 1;
get_random_bytes(kvm->arch.crypto.crycb->aes_wrapping_key_mask,
sizeof(kvm->arch.crypto.crycb->aes_wrapping_key_mask));
get_random_bytes(kvm->arch.crypto.crycb->dea_wrapping_key_mask,
sizeof(kvm->arch.crypto.crycb->dea_wrapping_key_mask));
return 0;
}
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
{
int i, rc;
char debug_name[16];
static unsigned long sca_offset;
rc = -EINVAL;
#ifdef CONFIG_KVM_S390_UCONTROL
if (type & ~KVM_VM_S390_UCONTROL)
goto out_err;
if ((type & KVM_VM_S390_UCONTROL) && (!capable(CAP_SYS_ADMIN)))
goto out_err;
#else
if (type)
goto out_err;
#endif
rc = s390_enable_sie();
if (rc)
goto out_err;
rc = -ENOMEM;
kvm->arch.sca = (struct sca_block *) get_zeroed_page(GFP_KERNEL);
if (!kvm->arch.sca)
goto out_err;
spin_lock(&kvm_lock);
sca_offset = (sca_offset + 16) & 0x7f0;
kvm->arch.sca = (struct sca_block *) ((char *) kvm->arch.sca + sca_offset);
spin_unlock(&kvm_lock);
sprintf(debug_name, "kvm-%u", current->pid);
kvm->arch.dbf = debug_register(debug_name, 8, 2, 8 * sizeof(long));
if (!kvm->arch.dbf)
goto out_err;
/*
* The architectural maximum amount of facilities is 16 kbit. To store
* this amount, 2 kbyte of memory is required. Thus we need a full
* page to hold the guest facility list (arch.model.fac->list) and the
* facility mask (arch.model.fac->mask). Its address size has to be
* 31 bits and word aligned.
*/
kvm->arch.model.fac =
(struct kvm_s390_fac *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!kvm->arch.model.fac)
goto out_err;
/* Populate the facility mask initially. */
memcpy(kvm->arch.model.fac->mask, S390_lowcore.stfle_fac_list,
S390_ARCH_FAC_LIST_SIZE_BYTE);
for (i = 0; i < S390_ARCH_FAC_LIST_SIZE_U64; i++) {
if (i < kvm_s390_fac_list_mask_size())
kvm->arch.model.fac->mask[i] &= kvm_s390_fac_list_mask[i];
else
kvm->arch.model.fac->mask[i] = 0UL;
}
/* Populate the facility list initially. */
memcpy(kvm->arch.model.fac->list, kvm->arch.model.fac->mask,
S390_ARCH_FAC_LIST_SIZE_BYTE);
kvm_s390_get_cpu_id(&kvm->arch.model.cpu_id);
kvm->arch.model.ibc = sclp.ibc & 0x0fff;
if (kvm_s390_crypto_init(kvm) < 0)
goto out_err;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
spin_lock_init(&kvm->arch.float_int.lock);
for (i = 0; i < FIRQ_LIST_COUNT; i++)
INIT_LIST_HEAD(&kvm->arch.float_int.lists[i]);
init_waitqueue_head(&kvm->arch.ipte_wq);
mutex_init(&kvm->arch.ipte_mutex);
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
debug_register_view(kvm->arch.dbf, &debug_sprintf_view);
VM_EVENT(kvm, 3, "%s", "vm created");
if (type & KVM_VM_S390_UCONTROL) {
kvm->arch.gmap = NULL;
} else {
kvm->arch.gmap = gmap_alloc(current->mm, (1UL << 44) - 1);
if (!kvm->arch.gmap)
goto out_err;
kvm->arch.gmap->private = kvm;
kvm->arch.gmap->pfault_enabled = 0;
}
kvm->arch.css_support = 0;
kvm->arch.use_irqchip = 0;
kvm->arch.epoch = 0;
spin_lock_init(&kvm->arch.start_stop_lock);
return 0;
out_err:
kfree(kvm->arch.crypto.crycb);
free_page((unsigned long)kvm->arch.model.fac);
debug_unregister(kvm->arch.dbf);
free_page((unsigned long)(kvm->arch.sca));
return rc;
}
void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
{
VCPU_EVENT(vcpu, 3, "%s", "free cpu");
trace_kvm_s390_destroy_vcpu(vcpu->vcpu_id);
kvm_s390_clear_local_irqs(vcpu);
kvm_clear_async_pf_completion_queue(vcpu);
if (!kvm_is_ucontrol(vcpu->kvm)) {
clear_bit(63 - vcpu->vcpu_id,
(unsigned long *) &vcpu->kvm->arch.sca->mcn);
if (vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda ==
(__u64) vcpu->arch.sie_block)
vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda = 0;
}
smp_mb();
if (kvm_is_ucontrol(vcpu->kvm))
gmap_free(vcpu->arch.gmap);
if (kvm_s390_cmma_enabled(vcpu->kvm))
kvm_s390_vcpu_unsetup_cmma(vcpu);
free_page((unsigned long)(vcpu->arch.sie_block));
kvm_vcpu_uninit(vcpu);
kmem_cache_free(kvm_vcpu_cache, vcpu);
}
static void kvm_free_vcpus(struct kvm *kvm)
{
unsigned int i;
struct kvm_vcpu *vcpu;
kvm_for_each_vcpu(i, vcpu, kvm)
kvm_arch_vcpu_destroy(vcpu);
mutex_lock(&kvm->lock);
for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
kvm->vcpus[i] = NULL;
atomic_set(&kvm->online_vcpus, 0);
mutex_unlock(&kvm->lock);
}
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_free_vcpus(kvm);
free_page((unsigned long)kvm->arch.model.fac);
free_page((unsigned long)(kvm->arch.sca));
debug_unregister(kvm->arch.dbf);
kfree(kvm->arch.crypto.crycb);
if (!kvm_is_ucontrol(kvm))
gmap_free(kvm->arch.gmap);
kvm_s390_destroy_adapters(kvm);
kvm_s390_clear_float_irqs(kvm);
}
/* Section: vcpu related */
static int __kvm_ucontrol_vcpu_init(struct kvm_vcpu *vcpu)
{
vcpu->arch.gmap = gmap_alloc(current->mm, -1UL);
if (!vcpu->arch.gmap)
return -ENOMEM;
vcpu->arch.gmap->private = vcpu->kvm;
return 0;
}
int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
{
vcpu->arch.pfault_token = KVM_S390_PFAULT_TOKEN_INVALID;
kvm_clear_async_pf_completion_queue(vcpu);
vcpu->run->kvm_valid_regs = KVM_SYNC_PREFIX |
KVM_SYNC_GPRS |
KVM_SYNC_ACRS |
KVM_SYNC_CRS |
KVM_SYNC_ARCH0 |
KVM_SYNC_PFAULT;
if (test_kvm_facility(vcpu->kvm, 129))
vcpu->run->kvm_valid_regs |= KVM_SYNC_VRS;
if (kvm_is_ucontrol(vcpu->kvm))
return __kvm_ucontrol_vcpu_init(vcpu);
return 0;
}
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
save_fp_ctl(&vcpu->arch.host_fpregs.fpc);
if (test_kvm_facility(vcpu->kvm, 129))
save_vx_regs((__vector128 *)&vcpu->arch.host_vregs->vrs);
else
save_fp_regs(vcpu->arch.host_fpregs.fprs);
save_access_regs(vcpu->arch.host_acrs);
if (test_kvm_facility(vcpu->kvm, 129)) {
restore_fp_ctl(&vcpu->run->s.regs.fpc);
restore_vx_regs((__vector128 *)&vcpu->run->s.regs.vrs);
} else {
restore_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
restore_fp_regs(vcpu->arch.guest_fpregs.fprs);
}
restore_access_regs(vcpu->run->s.regs.acrs);
gmap_enable(vcpu->arch.gmap);
atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
gmap_disable(vcpu->arch.gmap);
if (test_kvm_facility(vcpu->kvm, 129)) {
save_fp_ctl(&vcpu->run->s.regs.fpc);
save_vx_regs((__vector128 *)&vcpu->run->s.regs.vrs);
} else {
save_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
save_fp_regs(vcpu->arch.guest_fpregs.fprs);
}
save_access_regs(vcpu->run->s.regs.acrs);
restore_fp_ctl(&vcpu->arch.host_fpregs.fpc);
if (test_kvm_facility(vcpu->kvm, 129))
restore_vx_regs((__vector128 *)&vcpu->arch.host_vregs->vrs);
else
restore_fp_regs(vcpu->arch.host_fpregs.fprs);
restore_access_regs(vcpu->arch.host_acrs);
}
static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
{
/* this equals initial cpu reset in pop, but we don't switch to ESA */
vcpu->arch.sie_block->gpsw.mask = 0UL;
vcpu->arch.sie_block->gpsw.addr = 0UL;
kvm_s390_set_prefix(vcpu, 0);
vcpu->arch.sie_block->cputm = 0UL;
vcpu->arch.sie_block->ckc = 0UL;
vcpu->arch.sie_block->todpr = 0;
memset(vcpu->arch.sie_block->gcr, 0, 16 * sizeof(__u64));
vcpu->arch.sie_block->gcr[0] = 0xE0UL;
vcpu->arch.sie_block->gcr[14] = 0xC2000000UL;
vcpu->arch.guest_fpregs.fpc = 0;
asm volatile("lfpc %0" : : "Q" (vcpu->arch.guest_fpregs.fpc));
vcpu->arch.sie_block->gbea = 1;
vcpu->arch.sie_block->pp = 0;
vcpu->arch.pfault_token = KVM_S390_PFAULT_TOKEN_INVALID;
kvm_clear_async_pf_completion_queue(vcpu);
if (!kvm_s390_user_cpu_state_ctrl(vcpu->kvm))
kvm_s390_vcpu_stop(vcpu);
kvm_s390_clear_local_irqs(vcpu);
}
void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
{
mutex_lock(&vcpu->kvm->lock);
vcpu->arch.sie_block->epoch = vcpu->kvm->arch.epoch;
mutex_unlock(&vcpu->kvm->lock);
if (!kvm_is_ucontrol(vcpu->kvm))
vcpu->arch.gmap = vcpu->kvm->arch.gmap;
}
static void kvm_s390_vcpu_crypto_setup(struct kvm_vcpu *vcpu)
{
if (!test_kvm_facility(vcpu->kvm, 76))
return;
vcpu->arch.sie_block->ecb3 &= ~(ECB3_AES | ECB3_DEA);
if (vcpu->kvm->arch.crypto.aes_kw)
vcpu->arch.sie_block->ecb3 |= ECB3_AES;
if (vcpu->kvm->arch.crypto.dea_kw)
vcpu->arch.sie_block->ecb3 |= ECB3_DEA;
vcpu->arch.sie_block->crycbd = vcpu->kvm->arch.crypto.crycbd;
}
void kvm_s390_vcpu_unsetup_cmma(struct kvm_vcpu *vcpu)
{
free_page(vcpu->arch.sie_block->cbrlo);
vcpu->arch.sie_block->cbrlo = 0;
}
int kvm_s390_vcpu_setup_cmma(struct kvm_vcpu *vcpu)
{
vcpu->arch.sie_block->cbrlo = get_zeroed_page(GFP_KERNEL);
if (!vcpu->arch.sie_block->cbrlo)
return -ENOMEM;
vcpu->arch.sie_block->ecb2 |= 0x80;
vcpu->arch.sie_block->ecb2 &= ~0x08;
return 0;
}
static void kvm_s390_vcpu_setup_model(struct kvm_vcpu *vcpu)
{
struct kvm_s390_cpu_model *model = &vcpu->kvm->arch.model;
vcpu->arch.cpu_id = model->cpu_id;
vcpu->arch.sie_block->ibc = model->ibc;
vcpu->arch.sie_block->fac = (int) (long) model->fac->list;
}
int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
{
int rc = 0;
atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH |
CPUSTAT_SM |
CPUSTAT_STOPPED);
if (test_kvm_facility(vcpu->kvm, 78))
atomic_set_mask(CPUSTAT_GED2, &vcpu->arch.sie_block->cpuflags);
else if (test_kvm_facility(vcpu->kvm, 8))
atomic_set_mask(CPUSTAT_GED, &vcpu->arch.sie_block->cpuflags);
kvm_s390_vcpu_setup_model(vcpu);
vcpu->arch.sie_block->ecb = 6;
if (test_kvm_facility(vcpu->kvm, 50) && test_kvm_facility(vcpu->kvm, 73))
vcpu->arch.sie_block->ecb |= 0x10;
vcpu->arch.sie_block->ecb2 = 8;
vcpu->arch.sie_block->eca = 0xC1002000U;
if (sclp.has_siif)
vcpu->arch.sie_block->eca |= 1;
if (sclp.has_sigpif)
vcpu->arch.sie_block->eca |= 0x10000000U;
if (test_kvm_facility(vcpu->kvm, 129)) {
vcpu->arch.sie_block->eca |= 0x00020000;
vcpu->arch.sie_block->ecd |= 0x20000000;
}
vcpu->arch.sie_block->ictl |= ICTL_ISKE | ICTL_SSKE | ICTL_RRBE;
if (kvm_s390_cmma_enabled(vcpu->kvm)) {
rc = kvm_s390_vcpu_setup_cmma(vcpu);
if (rc)
return rc;
}
hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
vcpu->arch.ckc_timer.function = kvm_s390_idle_wakeup;
kvm_s390_vcpu_crypto_setup(vcpu);
return rc;
}
struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
unsigned int id)
{
struct kvm_vcpu *vcpu;
struct sie_page *sie_page;
int rc = -EINVAL;
if (id >= KVM_MAX_VCPUS)
goto out;
rc = -ENOMEM;
vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
if (!vcpu)
goto out;
sie_page = (struct sie_page *) get_zeroed_page(GFP_KERNEL);
if (!sie_page)
goto out_free_cpu;
vcpu->arch.sie_block = &sie_page->sie_block;
vcpu->arch.sie_block->itdba = (unsigned long) &sie_page->itdb;
vcpu->arch.host_vregs = &sie_page->vregs;
vcpu->arch.sie_block->icpua = id;
if (!kvm_is_ucontrol(kvm)) {
if (!kvm->arch.sca) {
WARN_ON_ONCE(1);
goto out_free_cpu;
}
if (!kvm->arch.sca->cpu[id].sda)
kvm->arch.sca->cpu[id].sda =
(__u64) vcpu->arch.sie_block;
vcpu->arch.sie_block->scaoh =
(__u32)(((__u64)kvm->arch.sca) >> 32);
vcpu->arch.sie_block->scaol = (__u32)(__u64)kvm->arch.sca;
set_bit(63 - id, (unsigned long *) &kvm->arch.sca->mcn);
}
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
spin_lock_init(&vcpu->arch.local_int.lock);
vcpu->arch.local_int.float_int = &kvm->arch.float_int;
vcpu->arch.local_int.wq = &vcpu->wq;
vcpu->arch.local_int.cpuflags = &vcpu->arch.sie_block->cpuflags;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
rc = kvm_vcpu_init(vcpu, kvm, id);
if (rc)
goto out_free_sie_block;
VM_EVENT(kvm, 3, "create cpu %d at %p, sie block at %p", id, vcpu,
vcpu->arch.sie_block);
trace_kvm_s390_create_vcpu(id, vcpu, vcpu->arch.sie_block);
return vcpu;
out_free_sie_block:
free_page((unsigned long)(vcpu->arch.sie_block));
out_free_cpu:
kmem_cache_free(kvm_vcpu_cache, vcpu);
out:
return ERR_PTR(rc);
}
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
{
return kvm_s390_vcpu_has_irq(vcpu, 0);
}
void kvm_s390_vcpu_block(struct kvm_vcpu *vcpu)
{
atomic_set_mask(PROG_BLOCK_SIE, &vcpu->arch.sie_block->prog20);
exit_sie(vcpu);
}
void kvm_s390_vcpu_unblock(struct kvm_vcpu *vcpu)
{
atomic_clear_mask(PROG_BLOCK_SIE, &vcpu->arch.sie_block->prog20);
}
static void kvm_s390_vcpu_request(struct kvm_vcpu *vcpu)
{
atomic_set_mask(PROG_REQUEST, &vcpu->arch.sie_block->prog20);
exit_sie(vcpu);
}
static void kvm_s390_vcpu_request_handled(struct kvm_vcpu *vcpu)
{
atomic_clear_mask(PROG_REQUEST, &vcpu->arch.sie_block->prog20);
}
/*
* Kick a guest cpu out of SIE and wait until SIE is not running.
* If the CPU is not running (e.g. waiting as idle) the function will
* return immediately. */
void exit_sie(struct kvm_vcpu *vcpu)
{
atomic_set_mask(CPUSTAT_STOP_INT, &vcpu->arch.sie_block->cpuflags);
while (vcpu->arch.sie_block->prog0c & PROG_IN_SIE)
cpu_relax();
}
/* Kick a guest cpu out of SIE to process a request synchronously */
void kvm_s390_sync_request(int req, struct kvm_vcpu *vcpu)
{
kvm_make_request(req, vcpu);
kvm_s390_vcpu_request(vcpu);
}
static void kvm_gmap_notifier(struct gmap *gmap, unsigned long address)
{
int i;
struct kvm *kvm = gmap->private;
struct kvm_vcpu *vcpu;
kvm_for_each_vcpu(i, vcpu, kvm) {
/* match against both prefix pages */
if (kvm_s390_get_prefix(vcpu) == (address & ~0x1000UL)) {
VCPU_EVENT(vcpu, 2, "gmap notifier for %lx", address);
kvm_s390_sync_request(KVM_REQ_MMU_RELOAD, vcpu);
}
}
}
int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
{
/* kvm common code refers to this, but never calls it */
BUG();
return 0;
}
static int kvm_arch_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu,
struct kvm_one_reg *reg)
{
int r = -EINVAL;
switch (reg->id) {
case KVM_REG_S390_TODPR:
r = put_user(vcpu->arch.sie_block->todpr,
(u32 __user *)reg->addr);
break;
case KVM_REG_S390_EPOCHDIFF:
r = put_user(vcpu->arch.sie_block->epoch,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_CPU_TIMER:
r = put_user(vcpu->arch.sie_block->cputm,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_CLOCK_COMP:
r = put_user(vcpu->arch.sie_block->ckc,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_PFTOKEN:
r = put_user(vcpu->arch.pfault_token,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_PFCOMPARE:
r = put_user(vcpu->arch.pfault_compare,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_PFSELECT:
r = put_user(vcpu->arch.pfault_select,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_PP:
r = put_user(vcpu->arch.sie_block->pp,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_GBEA:
r = put_user(vcpu->arch.sie_block->gbea,
(u64 __user *)reg->addr);
break;
default:
break;
}
return r;
}
static int kvm_arch_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu,
struct kvm_one_reg *reg)
{
int r = -EINVAL;
switch (reg->id) {
case KVM_REG_S390_TODPR:
r = get_user(vcpu->arch.sie_block->todpr,
(u32 __user *)reg->addr);
break;
case KVM_REG_S390_EPOCHDIFF:
r = get_user(vcpu->arch.sie_block->epoch,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_CPU_TIMER:
r = get_user(vcpu->arch.sie_block->cputm,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_CLOCK_COMP:
r = get_user(vcpu->arch.sie_block->ckc,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_PFTOKEN:
r = get_user(vcpu->arch.pfault_token,
(u64 __user *)reg->addr);
if (vcpu->arch.pfault_token == KVM_S390_PFAULT_TOKEN_INVALID)
kvm_clear_async_pf_completion_queue(vcpu);
break;
case KVM_REG_S390_PFCOMPARE:
r = get_user(vcpu->arch.pfault_compare,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_PFSELECT:
r = get_user(vcpu->arch.pfault_select,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_PP:
r = get_user(vcpu->arch.sie_block->pp,
(u64 __user *)reg->addr);
break;
case KVM_REG_S390_GBEA:
r = get_user(vcpu->arch.sie_block->gbea,
(u64 __user *)reg->addr);
break;
default:
break;
}
return r;
}
static int kvm_arch_vcpu_ioctl_initial_reset(struct kvm_vcpu *vcpu)
{
kvm_s390_vcpu_initial_reset(vcpu);
return 0;
}
int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
{
memcpy(&vcpu->run->s.regs.gprs, &regs->gprs, sizeof(regs->gprs));
return 0;
}
int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
{
memcpy(&regs->gprs, &vcpu->run->s.regs.gprs, sizeof(regs->gprs));
return 0;
}
int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
struct kvm_sregs *sregs)
{
memcpy(&vcpu->run->s.regs.acrs, &sregs->acrs, sizeof(sregs->acrs));
memcpy(&vcpu->arch.sie_block->gcr, &sregs->crs, sizeof(sregs->crs));
restore_access_regs(vcpu->run->s.regs.acrs);
return 0;
}
int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
struct kvm_sregs *sregs)
{
memcpy(&sregs->acrs, &vcpu->run->s.regs.acrs, sizeof(sregs->acrs));
memcpy(&sregs->crs, &vcpu->arch.sie_block->gcr, sizeof(sregs->crs));
return 0;
}
int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
{
if (test_fp_ctl(fpu->fpc))
return -EINVAL;
memcpy(&vcpu->arch.guest_fpregs.fprs, &fpu->fprs, sizeof(fpu->fprs));
vcpu->arch.guest_fpregs.fpc = fpu->fpc;
restore_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
restore_fp_regs(vcpu->arch.guest_fpregs.fprs);
return 0;
}
int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
{
memcpy(&fpu->fprs, &vcpu->arch.guest_fpregs.fprs, sizeof(fpu->fprs));
fpu->fpc = vcpu->arch.guest_fpregs.fpc;
return 0;
}
static int kvm_arch_vcpu_ioctl_set_initial_psw(struct kvm_vcpu *vcpu, psw_t psw)
{
int rc = 0;
if (!is_vcpu_stopped(vcpu))
rc = -EBUSY;
else {
vcpu->run->psw_mask = psw.mask;
vcpu->run->psw_addr = psw.addr;
}
return rc;
}
int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
struct kvm_translation *tr)
{
return -EINVAL; /* not implemented yet */
}
#define VALID_GUESTDBG_FLAGS (KVM_GUESTDBG_SINGLESTEP | \
KVM_GUESTDBG_USE_HW_BP | \
KVM_GUESTDBG_ENABLE)
int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
struct kvm_guest_debug *dbg)
{
int rc = 0;
vcpu->guest_debug = 0;
kvm_s390_clear_bp_data(vcpu);
if (dbg->control & ~VALID_GUESTDBG_FLAGS)
return -EINVAL;
if (dbg->control & KVM_GUESTDBG_ENABLE) {
vcpu->guest_debug = dbg->control;
/* enforce guest PER */
atomic_set_mask(CPUSTAT_P, &vcpu->arch.sie_block->cpuflags);
if (dbg->control & KVM_GUESTDBG_USE_HW_BP)
rc = kvm_s390_import_bp_data(vcpu, dbg);
} else {
atomic_clear_mask(CPUSTAT_P, &vcpu->arch.sie_block->cpuflags);
vcpu->arch.guestdbg.last_bp = 0;
}
if (rc) {
vcpu->guest_debug = 0;
kvm_s390_clear_bp_data(vcpu);
atomic_clear_mask(CPUSTAT_P, &vcpu->arch.sie_block->cpuflags);
}
return rc;
}
int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
/* CHECK_STOP and LOAD are not supported yet */
return is_vcpu_stopped(vcpu) ? KVM_MP_STATE_STOPPED :
KVM_MP_STATE_OPERATING;
}
int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
int rc = 0;
/* user space knows about this interface - let it control the state */
vcpu->kvm->arch.user_cpu_state_ctrl = 1;
switch (mp_state->mp_state) {
case KVM_MP_STATE_STOPPED:
kvm_s390_vcpu_stop(vcpu);
break;
case KVM_MP_STATE_OPERATING:
kvm_s390_vcpu_start(vcpu);
break;
case KVM_MP_STATE_LOAD:
case KVM_MP_STATE_CHECK_STOP:
/* fall through - CHECK_STOP and LOAD are not supported yet */
default:
rc = -ENXIO;
}
return rc;
}
bool kvm_s390_cmma_enabled(struct kvm *kvm)
{
if (!MACHINE_IS_LPAR)
return false;
/* only enable for z10 and later */
if (!MACHINE_HAS_EDAT1)
return false;
if (!kvm->arch.use_cmma)
return false;
return true;
}
static bool ibs_enabled(struct kvm_vcpu *vcpu)
{
return atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_IBS;
}
static int kvm_s390_handle_requests(struct kvm_vcpu *vcpu)
{
if (!vcpu->requests)
return 0;
retry:
kvm_s390_vcpu_request_handled(vcpu);
/*
* We use MMU_RELOAD just to re-arm the ipte notifier for the
* guest prefix page. gmap_ipte_notify will wait on the ptl lock.
* This ensures that the ipte instruction for this request has
* already finished. We might race against a second unmapper that
* wants to set the blocking bit. Lets just retry the request loop.
*/
if (kvm_check_request(KVM_REQ_MMU_RELOAD, vcpu)) {
int rc;
rc = gmap_ipte_notify(vcpu->arch.gmap,
kvm_s390_get_prefix(vcpu),
PAGE_SIZE * 2);
if (rc)
return rc;
goto retry;
}
if (kvm_check_request(KVM_REQ_TLB_FLUSH, vcpu)) {
vcpu->arch.sie_block->ihcpu = 0xffff;
goto retry;
}
if (kvm_check_request(KVM_REQ_ENABLE_IBS, vcpu)) {
if (!ibs_enabled(vcpu)) {
trace_kvm_s390_enable_disable_ibs(vcpu->vcpu_id, 1);
atomic_set_mask(CPUSTAT_IBS,
&vcpu->arch.sie_block->cpuflags);
}
goto retry;
}
if (kvm_check_request(KVM_REQ_DISABLE_IBS, vcpu)) {
if (ibs_enabled(vcpu)) {
trace_kvm_s390_enable_disable_ibs(vcpu->vcpu_id, 0);
atomic_clear_mask(CPUSTAT_IBS,
&vcpu->arch.sie_block->cpuflags);
}
goto retry;
}
/* nothing to do, just clear the request */
clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
return 0;
}
/**
* kvm_arch_fault_in_page - fault-in guest page if necessary
* @vcpu: The corresponding virtual cpu
* @gpa: Guest physical address
* @writable: Whether the page should be writable or not
*
* Make sure that a guest page has been faulted-in on the host.
*
* Return: Zero on success, negative error code otherwise.
*/
long kvm_arch_fault_in_page(struct kvm_vcpu *vcpu, gpa_t gpa, int writable)
{
return gmap_fault(vcpu->arch.gmap, gpa,
writable ? FAULT_FLAG_WRITE : 0);
}
static void __kvm_inject_pfault_token(struct kvm_vcpu *vcpu, bool start_token,
unsigned long token)
{
struct kvm_s390_interrupt inti;
struct kvm_s390_irq irq;
if (start_token) {
irq.u.ext.ext_params2 = token;
irq.type = KVM_S390_INT_PFAULT_INIT;
WARN_ON_ONCE(kvm_s390_inject_vcpu(vcpu, &irq));
} else {
inti.type = KVM_S390_INT_PFAULT_DONE;
inti.parm64 = token;
WARN_ON_ONCE(kvm_s390_inject_vm(vcpu->kvm, &inti));
}
}
void kvm_arch_async_page_not_present(struct kvm_vcpu *vcpu,
struct kvm_async_pf *work)
{
trace_kvm_s390_pfault_init(vcpu, work->arch.pfault_token);
__kvm_inject_pfault_token(vcpu, true, work->arch.pfault_token);
}
void kvm_arch_async_page_present(struct kvm_vcpu *vcpu,
struct kvm_async_pf *work)
{
trace_kvm_s390_pfault_done(vcpu, work->arch.pfault_token);
__kvm_inject_pfault_token(vcpu, false, work->arch.pfault_token);
}
void kvm_arch_async_page_ready(struct kvm_vcpu *vcpu,
struct kvm_async_pf *work)
{
/* s390 will always inject the page directly */
}
bool kvm_arch_can_inject_async_page_present(struct kvm_vcpu *vcpu)
{
/*
* s390 will always inject the page directly,
* but we still want check_async_completion to cleanup
*/
return true;
}
static int kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu)
{
hva_t hva;
struct kvm_arch_async_pf arch;
int rc;
if (vcpu->arch.pfault_token == KVM_S390_PFAULT_TOKEN_INVALID)
return 0;
if ((vcpu->arch.sie_block->gpsw.mask & vcpu->arch.pfault_select) !=
vcpu->arch.pfault_compare)
return 0;
if (psw_extint_disabled(vcpu))
return 0;
if (kvm_s390_vcpu_has_irq(vcpu, 0))
return 0;
if (!(vcpu->arch.sie_block->gcr[0] & 0x200ul))
return 0;
if (!vcpu->arch.gmap->pfault_enabled)
return 0;
hva = gfn_to_hva(vcpu->kvm, gpa_to_gfn(current->thread.gmap_addr));
hva += current->thread.gmap_addr & ~PAGE_MASK;
if (read_guest_real(vcpu, vcpu->arch.pfault_token, &arch.pfault_token, 8))
return 0;
rc = kvm_setup_async_pf(vcpu, current->thread.gmap_addr, hva, &arch);
return rc;
}
static int vcpu_pre_run(struct kvm_vcpu *vcpu)
{
int rc, cpuflags;
/*
* On s390 notifications for arriving pages will be delivered directly
* to the guest but the house keeping for completed pfaults is
* handled outside the worker.
*/
kvm_check_async_pf_completion(vcpu);
memcpy(&vcpu->arch.sie_block->gg14, &vcpu->run->s.regs.gprs[14], 16);
if (need_resched())
schedule();
if (test_cpu_flag(CIF_MCCK_PENDING))
s390_handle_mcck();
if (!kvm_is_ucontrol(vcpu->kvm)) {
rc = kvm_s390_deliver_pending_interrupts(vcpu);
if (rc)
return rc;
}
rc = kvm_s390_handle_requests(vcpu);
if (rc)
return rc;
if (guestdbg_enabled(vcpu)) {
kvm_s390_backup_guest_per_regs(vcpu);
kvm_s390_patch_guest_per_regs(vcpu);
}
vcpu->arch.sie_block->icptcode = 0;
cpuflags = atomic_read(&vcpu->arch.sie_block->cpuflags);
VCPU_EVENT(vcpu, 6, "entering sie flags %x", cpuflags);
trace_kvm_s390_sie_enter(vcpu, cpuflags);
return 0;
}
static int vcpu_post_run_fault_in_sie(struct kvm_vcpu *vcpu)
{
psw_t *psw = &vcpu->arch.sie_block->gpsw;
u8 opcode;
int rc;
VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
trace_kvm_s390_sie_fault(vcpu);
/*
* We want to inject an addressing exception, which is defined as a
* suppressing or terminating exception. However, since we came here
* by a DAT access exception, the PSW still points to the faulting
* instruction since DAT exceptions are nullifying. So we've got
* to look up the current opcode to get the length of the instruction
* to be able to forward the PSW.
*/
rc = read_guest(vcpu, psw->addr, 0, &opcode, 1);
if (rc)
return kvm_s390_inject_prog_cond(vcpu, rc);
psw->addr = __rewind_psw(*psw, -insn_length(opcode));
return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
}
static int vcpu_post_run(struct kvm_vcpu *vcpu, int exit_reason)
{
int rc = -1;
VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
vcpu->arch.sie_block->icptcode);
trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode);
if (guestdbg_enabled(vcpu))
kvm_s390_restore_guest_per_regs(vcpu);
if (exit_reason >= 0) {
rc = 0;
} else if (kvm_is_ucontrol(vcpu->kvm)) {
vcpu->run->exit_reason = KVM_EXIT_S390_UCONTROL;
vcpu->run->s390_ucontrol.trans_exc_code =
current->thread.gmap_addr;
vcpu->run->s390_ucontrol.pgm_code = 0x10;
rc = -EREMOTE;
} else if (current->thread.gmap_pfault) {
trace_kvm_s390_major_guest_pfault(vcpu);
current->thread.gmap_pfault = 0;
if (kvm_arch_setup_async_pf(vcpu)) {
rc = 0;
} else {
gpa_t gpa = current->thread.gmap_addr;
rc = kvm_arch_fault_in_page(vcpu, gpa, 1);
}
}
if (rc == -1)
rc = vcpu_post_run_fault_in_sie(vcpu);
memcpy(&vcpu->run->s.regs.gprs[14], &vcpu->arch.sie_block->gg14, 16);
if (rc == 0) {
if (kvm_is_ucontrol(vcpu->kvm))
/* Don't exit for host interrupts. */
rc = vcpu->arch.sie_block->icptcode ? -EOPNOTSUPP : 0;
else
rc = kvm_handle_sie_intercept(vcpu);
}
return rc;
}
static int __vcpu_run(struct kvm_vcpu *vcpu)
{
int rc, exit_reason;
/*
* We try to hold kvm->srcu during most of vcpu_run (except when run-
* ning the guest), so that memslots (and other stuff) are protected
*/
vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
do {
rc = vcpu_pre_run(vcpu);
if (rc)
break;
srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
/*
* As PF_VCPU will be used in fault handler, between
* guest_enter and guest_exit should be no uaccess.
*/
local_irq_disable();
__kvm_guest_enter();
local_irq_enable();
exit_reason = sie64a(vcpu->arch.sie_block,
vcpu->run->s.regs.gprs);
local_irq_disable();
__kvm_guest_exit();
local_irq_enable();
vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
rc = vcpu_post_run(vcpu, exit_reason);
} while (!signal_pending(current) && !guestdbg_exit_pending(vcpu) && !rc);
srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
return rc;
}
static void sync_regs(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
vcpu->arch.sie_block->gpsw.mask = kvm_run->psw_mask;
vcpu->arch.sie_block->gpsw.addr = kvm_run->psw_addr;
if (kvm_run->kvm_dirty_regs & KVM_SYNC_PREFIX)
kvm_s390_set_prefix(vcpu, kvm_run->s.regs.prefix);
if (kvm_run->kvm_dirty_regs & KVM_SYNC_CRS) {
memcpy(&vcpu->arch.sie_block->gcr, &kvm_run->s.regs.crs, 128);
/* some control register changes require a tlb flush */
kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
}
if (kvm_run->kvm_dirty_regs & KVM_SYNC_ARCH0) {
vcpu->arch.sie_block->cputm = kvm_run->s.regs.cputm;
vcpu->arch.sie_block->ckc = kvm_run->s.regs.ckc;
vcpu->arch.sie_block->todpr = kvm_run->s.regs.todpr;
vcpu->arch.sie_block->pp = kvm_run->s.regs.pp;
vcpu->arch.sie_block->gbea = kvm_run->s.regs.gbea;
}
if (kvm_run->kvm_dirty_regs & KVM_SYNC_PFAULT) {
vcpu->arch.pfault_token = kvm_run->s.regs.pft;
vcpu->arch.pfault_select = kvm_run->s.regs.pfs;
vcpu->arch.pfault_compare = kvm_run->s.regs.pfc;
if (vcpu->arch.pfault_token == KVM_S390_PFAULT_TOKEN_INVALID)
kvm_clear_async_pf_completion_queue(vcpu);
}
kvm_run->kvm_dirty_regs = 0;
}
static void store_regs(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
kvm_run->psw_mask = vcpu->arch.sie_block->gpsw.mask;
kvm_run->psw_addr = vcpu->arch.sie_block->gpsw.addr;
kvm_run->s.regs.prefix = kvm_s390_get_prefix(vcpu);
memcpy(&kvm_run->s.regs.crs, &vcpu->arch.sie_block->gcr, 128);
kvm_run->s.regs.cputm = vcpu->arch.sie_block->cputm;
kvm_run->s.regs.ckc = vcpu->arch.sie_block->ckc;
kvm_run->s.regs.todpr = vcpu->arch.sie_block->todpr;
kvm_run->s.regs.pp = vcpu->arch.sie_block->pp;
kvm_run->s.regs.gbea = vcpu->arch.sie_block->gbea;
kvm_run->s.regs.pft = vcpu->arch.pfault_token;
kvm_run->s.regs.pfs = vcpu->arch.pfault_select;
kvm_run->s.regs.pfc = vcpu->arch.pfault_compare;
}
int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
int rc;
sigset_t sigsaved;
if (guestdbg_exit_pending(vcpu)) {
kvm_s390_prepare_debug_exit(vcpu);
return 0;
}
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
if (!kvm_s390_user_cpu_state_ctrl(vcpu->kvm)) {
kvm_s390_vcpu_start(vcpu);
} else if (is_vcpu_stopped(vcpu)) {
pr_err_ratelimited("can't run stopped vcpu %d\n",
vcpu->vcpu_id);
return -EINVAL;
}
sync_regs(vcpu, kvm_run);
might_fault();
rc = __vcpu_run(vcpu);
if (signal_pending(current) && !rc) {
kvm_run->exit_reason = KVM_EXIT_INTR;
rc = -EINTR;
}
if (guestdbg_exit_pending(vcpu) && !rc) {
kvm_s390_prepare_debug_exit(vcpu);
rc = 0;
}
if (rc == -EOPNOTSUPP) {
/* intercept cannot be handled in-kernel, prepare kvm-run */
kvm_run->exit_reason = KVM_EXIT_S390_SIEIC;
kvm_run->s390_sieic.icptcode = vcpu->arch.sie_block->icptcode;
kvm_run->s390_sieic.ipa = vcpu->arch.sie_block->ipa;
kvm_run->s390_sieic.ipb = vcpu->arch.sie_block->ipb;
rc = 0;
}
if (rc == -EREMOTE) {
/* intercept was handled, but userspace support is needed
* kvm_run has been prepared by the handler */
rc = 0;
}
store_regs(vcpu, kvm_run);
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
vcpu->stat.exit_userspace++;
return rc;
}
/*
* store status at address
* we use have two special cases:
* KVM_S390_STORE_STATUS_NOADDR: -> 0x1200 on 64 bit
* KVM_S390_STORE_STATUS_PREFIXED: -> prefix
*/
int kvm_s390_store_status_unloaded(struct kvm_vcpu *vcpu, unsigned long gpa)
{
unsigned char archmode = 1;
unsigned int px;
u64 clkcomp;
int rc;
if (gpa == KVM_S390_STORE_STATUS_NOADDR) {
if (write_guest_abs(vcpu, 163, &archmode, 1))
return -EFAULT;
gpa = SAVE_AREA_BASE;
} else if (gpa == KVM_S390_STORE_STATUS_PREFIXED) {
if (write_guest_real(vcpu, 163, &archmode, 1))
return -EFAULT;
gpa = kvm_s390_real_to_abs(vcpu, SAVE_AREA_BASE);
}
rc = write_guest_abs(vcpu, gpa + offsetof(struct save_area, fp_regs),
vcpu->arch.guest_fpregs.fprs, 128);
rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, gp_regs),
vcpu->run->s.regs.gprs, 128);
rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, psw),
&vcpu->arch.sie_block->gpsw, 16);
px = kvm_s390_get_prefix(vcpu);
rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, pref_reg),
&px, 4);
rc |= write_guest_abs(vcpu,
gpa + offsetof(struct save_area, fp_ctrl_reg),
&vcpu->arch.guest_fpregs.fpc, 4);
rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, tod_reg),
&vcpu->arch.sie_block->todpr, 4);
rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, timer),
&vcpu->arch.sie_block->cputm, 8);
clkcomp = vcpu->arch.sie_block->ckc >> 8;
rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, clk_cmp),
&clkcomp, 8);
rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, acc_regs),
&vcpu->run->s.regs.acrs, 64);
rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, ctrl_regs),
&vcpu->arch.sie_block->gcr, 128);
return rc ? -EFAULT : 0;
}
int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
{
/*
* The guest FPRS and ACRS are in the host FPRS/ACRS due to the lazy
* copying in vcpu load/put. Lets update our copies before we save
* it into the save area
*/
save_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
save_fp_regs(vcpu->arch.guest_fpregs.fprs);
save_access_regs(vcpu->run->s.regs.acrs);
return kvm_s390_store_status_unloaded(vcpu, addr);
}
/*
* store additional status at address
*/
int kvm_s390_store_adtl_status_unloaded(struct kvm_vcpu *vcpu,
unsigned long gpa)
{
/* Only bits 0-53 are used for address formation */
if (!(gpa & ~0x3ff))
return 0;
return write_guest_abs(vcpu, gpa & ~0x3ff,
(void *)&vcpu->run->s.regs.vrs, 512);
}
int kvm_s390_vcpu_store_adtl_status(struct kvm_vcpu *vcpu, unsigned long addr)
{
if (!test_kvm_facility(vcpu->kvm, 129))
return 0;
/*
* The guest VXRS are in the host VXRs due to the lazy
* copying in vcpu load/put. Let's update our copies before we save
* it into the save area.
*/
save_vx_regs((__vector128 *)&vcpu->run->s.regs.vrs);
return kvm_s390_store_adtl_status_unloaded(vcpu, addr);
}
static void __disable_ibs_on_vcpu(struct kvm_vcpu *vcpu)
{
kvm_check_request(KVM_REQ_ENABLE_IBS, vcpu);
kvm_s390_sync_request(KVM_REQ_DISABLE_IBS, vcpu);
}
static void __disable_ibs_on_all_vcpus(struct kvm *kvm)
{
unsigned int i;
struct kvm_vcpu *vcpu;
kvm_for_each_vcpu(i, vcpu, kvm) {
__disable_ibs_on_vcpu(vcpu);
}
}
static void __enable_ibs_on_vcpu(struct kvm_vcpu *vcpu)
{
kvm_check_request(KVM_REQ_DISABLE_IBS, vcpu);
kvm_s390_sync_request(KVM_REQ_ENABLE_IBS, vcpu);
}
void kvm_s390_vcpu_start(struct kvm_vcpu *vcpu)
{
int i, online_vcpus, started_vcpus = 0;
if (!is_vcpu_stopped(vcpu))
return;
trace_kvm_s390_vcpu_start_stop(vcpu->vcpu_id, 1);
/* Only one cpu at a time may enter/leave the STOPPED state. */
spin_lock(&vcpu->kvm->arch.start_stop_lock);
online_vcpus = atomic_read(&vcpu->kvm->online_vcpus);
for (i = 0; i < online_vcpus; i++) {
if (!is_vcpu_stopped(vcpu->kvm->vcpus[i]))
started_vcpus++;
}
if (started_vcpus == 0) {
/* we're the only active VCPU -> speed it up */
__enable_ibs_on_vcpu(vcpu);
} else if (started_vcpus == 1) {
/*
* As we are starting a second VCPU, we have to disable
* the IBS facility on all VCPUs to remove potentially
* oustanding ENABLE requests.
*/
__disable_ibs_on_all_vcpus(vcpu->kvm);
}
atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
/*
* Another VCPU might have used IBS while we were offline.
* Let's play safe and flush the VCPU at startup.
*/
kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
spin_unlock(&vcpu->kvm->arch.start_stop_lock);
return;
}
void kvm_s390_vcpu_stop(struct kvm_vcpu *vcpu)
{
int i, online_vcpus, started_vcpus = 0;
struct kvm_vcpu *started_vcpu = NULL;
if (is_vcpu_stopped(vcpu))
return;
trace_kvm_s390_vcpu_start_stop(vcpu->vcpu_id, 0);
/* Only one cpu at a time may enter/leave the STOPPED state. */
spin_lock(&vcpu->kvm->arch.start_stop_lock);
online_vcpus = atomic_read(&vcpu->kvm->online_vcpus);
/* SIGP STOP and SIGP STOP AND STORE STATUS has been fully processed */
kvm_s390_clear_stop_irq(vcpu);
atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
__disable_ibs_on_vcpu(vcpu);
for (i = 0; i < online_vcpus; i++) {
if (!is_vcpu_stopped(vcpu->kvm->vcpus[i])) {
started_vcpus++;
started_vcpu = vcpu->kvm->vcpus[i];
}
}
if (started_vcpus == 1) {
/*
* As we only have one VCPU left, we want to enable the
* IBS facility for that VCPU to speed it up.
*/
__enable_ibs_on_vcpu(started_vcpu);
}
spin_unlock(&vcpu->kvm->arch.start_stop_lock);
return;
}
static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
struct kvm_enable_cap *cap)
{
int r;
if (cap->flags)
return -EINVAL;
switch (cap->cap) {
case KVM_CAP_S390_CSS_SUPPORT:
if (!vcpu->kvm->arch.css_support) {
vcpu->kvm->arch.css_support = 1;
trace_kvm_s390_enable_css(vcpu->kvm);
}
r = 0;
break;
default:
r = -EINVAL;
break;
}
return r;
}
static long kvm_s390_guest_mem_op(struct kvm_vcpu *vcpu,
struct kvm_s390_mem_op *mop)
{
void __user *uaddr = (void __user *)mop->buf;
void *tmpbuf = NULL;
int r, srcu_idx;
const u64 supported_flags = KVM_S390_MEMOP_F_INJECT_EXCEPTION
| KVM_S390_MEMOP_F_CHECK_ONLY;
if (mop->flags & ~supported_flags)
return -EINVAL;
if (mop->size > MEM_OP_MAX_SIZE)
return -E2BIG;
if (!(mop->flags & KVM_S390_MEMOP_F_CHECK_ONLY)) {
tmpbuf = vmalloc(mop->size);
if (!tmpbuf)
return -ENOMEM;
}
srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
switch (mop->op) {
case KVM_S390_MEMOP_LOGICAL_READ:
if (mop->flags & KVM_S390_MEMOP_F_CHECK_ONLY) {
r = check_gva_range(vcpu, mop->gaddr, mop->ar, mop->size, false);
break;
}
r = read_guest(vcpu, mop->gaddr, mop->ar, tmpbuf, mop->size);
if (r == 0) {
if (copy_to_user(uaddr, tmpbuf, mop->size))
r = -EFAULT;
}
break;
case KVM_S390_MEMOP_LOGICAL_WRITE:
if (mop->flags & KVM_S390_MEMOP_F_CHECK_ONLY) {
r = check_gva_range(vcpu, mop->gaddr, mop->ar, mop->size, true);
break;
}
if (copy_from_user(tmpbuf, uaddr, mop->size)) {
r = -EFAULT;
break;
}
r = write_guest(vcpu, mop->gaddr, mop->ar, tmpbuf, mop->size);
break;
default:
r = -EINVAL;
}
srcu_read_unlock(&vcpu->kvm->srcu, srcu_idx);
if (r > 0 && (mop->flags & KVM_S390_MEMOP_F_INJECT_EXCEPTION) != 0)
kvm_s390_inject_prog_irq(vcpu, &vcpu->arch.pgm);
vfree(tmpbuf);
return r;
}
long kvm_arch_vcpu_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
struct kvm_vcpu *vcpu = filp->private_data;
void __user *argp = (void __user *)arg;
int idx;
long r;
switch (ioctl) {
case KVM_S390_IRQ: {
struct kvm_s390_irq s390irq;
r = -EFAULT;
if (copy_from_user(&s390irq, argp, sizeof(s390irq)))
break;
r = kvm_s390_inject_vcpu(vcpu, &s390irq);
break;
}
case KVM_S390_INTERRUPT: {
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
struct kvm_s390_interrupt s390int;
struct kvm_s390_irq s390irq;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
r = -EFAULT;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
if (copy_from_user(&s390int, argp, sizeof(s390int)))
break;
if (s390int_to_s390irq(&s390int, &s390irq))
return -EINVAL;
r = kvm_s390_inject_vcpu(vcpu, &s390irq);
break;
KVM: s390: interrupt subsystem, cpu timer, waitpsw This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 00:47:26 +07:00
}
case KVM_S390_STORE_STATUS:
idx = srcu_read_lock(&vcpu->kvm->srcu);
r = kvm_s390_vcpu_store_status(vcpu, arg);
srcu_read_unlock(&vcpu->kvm->srcu, idx);
break;
case KVM_S390_SET_INITIAL_PSW: {
psw_t psw;
r = -EFAULT;
if (copy_from_user(&psw, argp, sizeof(psw)))
break;
r = kvm_arch_vcpu_ioctl_set_initial_psw(vcpu, psw);
break;
}
case KVM_S390_INITIAL_RESET:
r = kvm_arch_vcpu_ioctl_initial_reset(vcpu);
break;
case KVM_SET_ONE_REG:
case KVM_GET_ONE_REG: {
struct kvm_one_reg reg;
r = -EFAULT;
if (copy_from_user(&reg, argp, sizeof(reg)))
break;
if (ioctl == KVM_SET_ONE_REG)
r = kvm_arch_vcpu_ioctl_set_one_reg(vcpu, &reg);
else
r = kvm_arch_vcpu_ioctl_get_one_reg(vcpu, &reg);
break;
}
#ifdef CONFIG_KVM_S390_UCONTROL
case KVM_S390_UCAS_MAP: {
struct kvm_s390_ucas_mapping ucasmap;
if (copy_from_user(&ucasmap, argp, sizeof(ucasmap))) {
r = -EFAULT;
break;
}
if (!kvm_is_ucontrol(vcpu->kvm)) {
r = -EINVAL;
break;
}
r = gmap_map_segment(vcpu->arch.gmap, ucasmap.user_addr,
ucasmap.vcpu_addr, ucasmap.length);
break;
}
case KVM_S390_UCAS_UNMAP: {
struct kvm_s390_ucas_mapping ucasmap;
if (copy_from_user(&ucasmap, argp, sizeof(ucasmap))) {
r = -EFAULT;
break;
}
if (!kvm_is_ucontrol(vcpu->kvm)) {
r = -EINVAL;
break;
}
r = gmap_unmap_segment(vcpu->arch.gmap, ucasmap.vcpu_addr,
ucasmap.length);
break;
}
#endif
case KVM_S390_VCPU_FAULT: {
r = gmap_fault(vcpu->arch.gmap, arg, 0);
break;
}
case KVM_ENABLE_CAP:
{
struct kvm_enable_cap cap;
r = -EFAULT;
if (copy_from_user(&cap, argp, sizeof(cap)))
break;
r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
break;
}
case KVM_S390_MEM_OP: {
struct kvm_s390_mem_op mem_op;
if (copy_from_user(&mem_op, argp, sizeof(mem_op)) == 0)
r = kvm_s390_guest_mem_op(vcpu, &mem_op);
else
r = -EFAULT;
break;
}
case KVM_S390_SET_IRQ_STATE: {
struct kvm_s390_irq_state irq_state;
r = -EFAULT;
if (copy_from_user(&irq_state, argp, sizeof(irq_state)))
break;
if (irq_state.len > VCPU_IRQS_MAX_BUF ||
irq_state.len == 0 ||
irq_state.len % sizeof(struct kvm_s390_irq) > 0) {
r = -EINVAL;
break;
}
r = kvm_s390_set_irq_state(vcpu,
(void __user *) irq_state.buf,
irq_state.len);
break;
}
case KVM_S390_GET_IRQ_STATE: {
struct kvm_s390_irq_state irq_state;
r = -EFAULT;
if (copy_from_user(&irq_state, argp, sizeof(irq_state)))
break;
if (irq_state.len == 0) {
r = -EINVAL;
break;
}
r = kvm_s390_get_irq_state(vcpu,
(__u8 __user *) irq_state.buf,
irq_state.len);
break;
}
default:
r = -ENOTTY;
}
return r;
}
int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
{
#ifdef CONFIG_KVM_S390_UCONTROL
if ((vmf->pgoff == KVM_S390_SIE_PAGE_OFFSET)
&& (kvm_is_ucontrol(vcpu->kvm))) {
vmf->page = virt_to_page(vcpu->arch.sie_block);
get_page(vmf->page);
return 0;
}
#endif
return VM_FAULT_SIGBUS;
}
int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
unsigned long npages)
{
return 0;
}
/* Section: memory related */
int kvm_arch_prepare_memory_region(struct kvm *kvm,
struct kvm_memory_slot *memslot,
const struct kvm_userspace_memory_region *mem,
enum kvm_mr_change change)
{
/* A few sanity checks. We can have memory slots which have to be
located/ended at a segment boundary (1MB). The memory in userland is
ok to be fragmented into various different vmas. It is okay to mmap()
and munmap() stuff in this slot after doing this call at any time */
if (mem->userspace_addr & 0xffffful)
return -EINVAL;
if (mem->memory_size & 0xffffful)
return -EINVAL;
return 0;
}
void kvm_arch_commit_memory_region(struct kvm *kvm,
const struct kvm_userspace_memory_region *mem,
const struct kvm_memory_slot *old,
const struct kvm_memory_slot *new,
enum kvm_mr_change change)
{
int rc;
/* If the basics of the memslot do not change, we do not want
* to update the gmap. Every update causes several unnecessary
* segment translation exceptions. This is usually handled just
* fine by the normal fault handler + gmap, but it will also
* cause faults on the prefix page of running guest CPUs.
*/
if (old->userspace_addr == mem->userspace_addr &&
old->base_gfn * PAGE_SIZE == mem->guest_phys_addr &&
old->npages * PAGE_SIZE == mem->memory_size)
return;
rc = gmap_map_segment(kvm->arch.gmap, mem->userspace_addr,
mem->guest_phys_addr, mem->memory_size);
if (rc)
pr_warn("failed to commit memory region\n");
return;
}
static int __init kvm_s390_init(void)
{
return kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE);
}
static void __exit kvm_s390_exit(void)
{
kvm_exit();
}
module_init(kvm_s390_init);
module_exit(kvm_s390_exit);
/*
* Enable autoloading of the kvm module.
* Note that we add the module alias here instead of virt/kvm/kvm_main.c
* since x86 takes a different approach.
*/
#include <linux/miscdevice.h>
MODULE_ALIAS_MISCDEV(KVM_MINOR);
MODULE_ALIAS("devname:kvm");