linux_dsm_epyc7002/drivers/gpu/drm/radeon/r600_hdmi.c

695 lines
22 KiB
C
Raw Normal View History

/*
* Copyright 2008 Advanced Micro Devices, Inc.
* Copyright 2008 Red Hat Inc.
* Copyright 2009 Christian König.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Christian König
*/
#include <linux/hdmi.h>
#include <drm/drmP.h>
#include <drm/radeon_drm.h>
#include "radeon.h"
#include "radeon_asic.h"
#include "r600d.h"
#include "atom.h"
/*
* HDMI color format
*/
enum r600_hdmi_color_format {
RGB = 0,
YCC_422 = 1,
YCC_444 = 2
};
/*
* IEC60958 status bits
*/
enum r600_hdmi_iec_status_bits {
AUDIO_STATUS_DIG_ENABLE = 0x01,
AUDIO_STATUS_V = 0x02,
AUDIO_STATUS_VCFG = 0x04,
AUDIO_STATUS_EMPHASIS = 0x08,
AUDIO_STATUS_COPYRIGHT = 0x10,
AUDIO_STATUS_NONAUDIO = 0x20,
AUDIO_STATUS_PROFESSIONAL = 0x40,
AUDIO_STATUS_LEVEL = 0x80
};
static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = {
/* 32kHz 44.1kHz 48kHz */
/* Clock N CTS N CTS N CTS */
{ 25175, 4096, 25175, 28224, 125875, 6144, 25175 }, /* 25,20/1.001 MHz */
{ 25200, 4096, 25200, 6272, 28000, 6144, 25200 }, /* 25.20 MHz */
{ 27000, 4096, 27000, 6272, 30000, 6144, 27000 }, /* 27.00 MHz */
{ 27027, 4096, 27027, 6272, 30030, 6144, 27027 }, /* 27.00*1.001 MHz */
{ 54000, 4096, 54000, 6272, 60000, 6144, 54000 }, /* 54.00 MHz */
{ 54054, 4096, 54054, 6272, 60060, 6144, 54054 }, /* 54.00*1.001 MHz */
{ 74176, 4096, 74176, 5733, 75335, 6144, 74176 }, /* 74.25/1.001 MHz */
{ 74250, 4096, 74250, 6272, 82500, 6144, 74250 }, /* 74.25 MHz */
{ 148352, 4096, 148352, 5733, 150670, 6144, 148352 }, /* 148.50/1.001 MHz */
{ 148500, 4096, 148500, 6272, 165000, 6144, 148500 }, /* 148.50 MHz */
{ 0, 4096, 0, 6272, 0, 6144, 0 } /* Other */
};
/*
* calculate CTS value if it's not found in the table
*/
static void r600_hdmi_calc_cts(uint32_t clock, int *CTS, int N, int freq)
{
u64 n;
u32 d;
if (*CTS == 0) {
n = (u64)clock * (u64)N * 1000ULL;
d = 128 * freq;
do_div(n, d);
*CTS = n;
}
DRM_DEBUG("Using ACR timing N=%d CTS=%d for frequency %d\n",
N, *CTS, freq);
}
struct radeon_hdmi_acr r600_hdmi_acr(uint32_t clock)
{
struct radeon_hdmi_acr res;
u8 i;
for (i = 0; r600_hdmi_predefined_acr[i].clock != clock &&
r600_hdmi_predefined_acr[i].clock != 0; i++)
;
res = r600_hdmi_predefined_acr[i];
/* In case some CTS are missing */
r600_hdmi_calc_cts(clock, &res.cts_32khz, res.n_32khz, 32000);
r600_hdmi_calc_cts(clock, &res.cts_44_1khz, res.n_44_1khz, 44100);
r600_hdmi_calc_cts(clock, &res.cts_48khz, res.n_48khz, 48000);
return res;
}
/*
* update the N and CTS parameters for a given pixel clock rate
*/
static void r600_hdmi_update_ACR(struct drm_encoder *encoder, uint32_t clock)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_hdmi_acr acr = r600_hdmi_acr(clock);
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset = dig->afmt->offset;
WREG32(HDMI0_ACR_32_0 + offset, HDMI0_ACR_CTS_32(acr.cts_32khz));
WREG32(HDMI0_ACR_32_1 + offset, acr.n_32khz);
WREG32(HDMI0_ACR_44_0 + offset, HDMI0_ACR_CTS_44(acr.cts_44_1khz));
WREG32(HDMI0_ACR_44_1 + offset, acr.n_44_1khz);
WREG32(HDMI0_ACR_48_0 + offset, HDMI0_ACR_CTS_48(acr.cts_48khz));
WREG32(HDMI0_ACR_48_1 + offset, acr.n_48khz);
}
/*
* build a HDMI Video Info Frame
*/
static void r600_hdmi_update_avi_infoframe(struct drm_encoder *encoder,
void *buffer, size_t size)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset = dig->afmt->offset;
uint8_t *frame = buffer + 3;
uint8_t *header = buffer;
WREG32(HDMI0_AVI_INFO0 + offset,
frame[0x0] | (frame[0x1] << 8) | (frame[0x2] << 16) | (frame[0x3] << 24));
WREG32(HDMI0_AVI_INFO1 + offset,
frame[0x4] | (frame[0x5] << 8) | (frame[0x6] << 16) | (frame[0x7] << 24));
WREG32(HDMI0_AVI_INFO2 + offset,
frame[0x8] | (frame[0x9] << 8) | (frame[0xA] << 16) | (frame[0xB] << 24));
WREG32(HDMI0_AVI_INFO3 + offset,
frame[0xC] | (frame[0xD] << 8) | (header[1] << 24));
}
/*
* build a Audio Info Frame
*/
static void r600_hdmi_update_audio_infoframe(struct drm_encoder *encoder,
const void *buffer, size_t size)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset = dig->afmt->offset;
const u8 *frame = buffer + 3;
WREG32(HDMI0_AUDIO_INFO0 + offset,
frame[0x0] | (frame[0x1] << 8) | (frame[0x2] << 16) | (frame[0x3] << 24));
WREG32(HDMI0_AUDIO_INFO1 + offset,
frame[0x4] | (frame[0x5] << 8) | (frame[0x6] << 16) | (frame[0x8] << 24));
}
/*
* test if audio buffer is filled enough to start playing
*/
static bool r600_hdmi_is_audio_buffer_filled(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset = dig->afmt->offset;
return (RREG32(HDMI0_STATUS + offset) & 0x10) != 0;
}
/*
* have buffer status changed since last call?
*/
int r600_hdmi_buffer_status_changed(struct drm_encoder *encoder)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
int status, result;
if (!dig->afmt || !dig->afmt->enabled)
return 0;
status = r600_hdmi_is_audio_buffer_filled(encoder);
result = dig->afmt->last_buffer_filled_status != status;
dig->afmt->last_buffer_filled_status = status;
return result;
}
/*
* write the audio workaround status to the hardware
*/
static void r600_hdmi_audio_workaround(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset = dig->afmt->offset;
bool hdmi_audio_workaround = false; /* FIXME */
u32 value;
if (!hdmi_audio_workaround ||
r600_hdmi_is_audio_buffer_filled(encoder))
value = 0; /* disable workaround */
else
value = HDMI0_AUDIO_TEST_EN; /* enable workaround */
WREG32_P(HDMI0_AUDIO_PACKET_CONTROL + offset,
value, ~HDMI0_AUDIO_TEST_EN);
}
void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u32 base_rate = 24000;
u32 max_ratio = clock / base_rate;
u32 dto_phase;
u32 dto_modulo = clock;
u32 wallclock_ratio;
u32 dto_cntl;
if (!dig || !dig->afmt)
return;
if (max_ratio >= 8) {
dto_phase = 192 * 1000;
wallclock_ratio = 3;
} else if (max_ratio >= 4) {
dto_phase = 96 * 1000;
wallclock_ratio = 2;
} else if (max_ratio >= 2) {
dto_phase = 48 * 1000;
wallclock_ratio = 1;
} else {
dto_phase = 24 * 1000;
wallclock_ratio = 0;
}
/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
* doesn't matter which one you use. Just use the first one.
*/
/* XXX two dtos; generally use dto0 for hdmi */
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
* is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
*/
if (ASIC_IS_DCE32(rdev)) {
if (dig->dig_encoder == 0) {
dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
WREG32(DCCG_AUDIO_DTO0_CNTL, dto_cntl);
WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase);
WREG32(DCCG_AUDIO_DTO0_MODULE, dto_modulo);
WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
} else {
dto_cntl = RREG32(DCCG_AUDIO_DTO1_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
WREG32(DCCG_AUDIO_DTO1_CNTL, dto_cntl);
WREG32(DCCG_AUDIO_DTO1_PHASE, dto_phase);
WREG32(DCCG_AUDIO_DTO1_MODULE, dto_modulo);
WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
}
} else if (ASIC_IS_DCE3(rdev)) {
/* according to the reg specs, this should DCE3.2 only, but in
* practice it seems to cover DCE3.0/3.1 as well.
*/
if (dig->dig_encoder == 0) {
WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
} else {
WREG32(DCCG_AUDIO_DTO1_PHASE, base_rate * 100);
WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100);
WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
}
} else {
/* according to the reg specs, this should be DCE2.0 and DCE3.0/3.1 */
WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
AUDIO_DTO_MODULE(clock / 10));
}
}
static void dce3_2_afmt_write_speaker_allocation(struct drm_encoder *encoder)
{
struct radeon_device *rdev = encoder->dev->dev_private;
struct drm_connector *connector;
struct radeon_connector *radeon_connector = NULL;
u32 tmp;
u8 *sadb;
int sad_count;
/* XXX: setting this register causes hangs on some asics */
return;
list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) {
if (connector->encoder == encoder) {
radeon_connector = to_radeon_connector(connector);
break;
}
}
if (!radeon_connector) {
DRM_ERROR("Couldn't find encoder's connector\n");
return;
}
sad_count = drm_edid_to_speaker_allocation(radeon_connector->edid, &sadb);
if (sad_count < 0) {
DRM_ERROR("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
return;
}
/* program the speaker allocation */
tmp = RREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER);
tmp &= ~(DP_CONNECTION | SPEAKER_ALLOCATION_MASK);
/* set HDMI mode */
tmp |= HDMI_CONNECTION;
if (sad_count)
tmp |= SPEAKER_ALLOCATION(sadb[0]);
else
tmp |= SPEAKER_ALLOCATION(5); /* stereo */
WREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER, tmp);
kfree(sadb);
}
static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder)
{
struct radeon_device *rdev = encoder->dev->dev_private;
struct drm_connector *connector;
struct radeon_connector *radeon_connector = NULL;
struct cea_sad *sads;
int i, sad_count;
static const u16 eld_reg_to_type[][2] = {
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR0, HDMI_AUDIO_CODING_TYPE_PCM },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR1, HDMI_AUDIO_CODING_TYPE_AC3 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR2, HDMI_AUDIO_CODING_TYPE_MPEG1 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR3, HDMI_AUDIO_CODING_TYPE_MP3 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR4, HDMI_AUDIO_CODING_TYPE_MPEG2 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR5, HDMI_AUDIO_CODING_TYPE_AAC_LC },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR6, HDMI_AUDIO_CODING_TYPE_DTS },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR7, HDMI_AUDIO_CODING_TYPE_ATRAC },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR9, HDMI_AUDIO_CODING_TYPE_EAC3 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR10, HDMI_AUDIO_CODING_TYPE_DTS_HD },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR11, HDMI_AUDIO_CODING_TYPE_MLP },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR13, HDMI_AUDIO_CODING_TYPE_WMA_PRO },
};
list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) {
if (connector->encoder == encoder) {
radeon_connector = to_radeon_connector(connector);
break;
}
}
if (!radeon_connector) {
DRM_ERROR("Couldn't find encoder's connector\n");
return;
}
sad_count = drm_edid_to_sad(radeon_connector->edid, &sads);
if (sad_count < 0) {
DRM_ERROR("Couldn't read SADs: %d\n", sad_count);
return;
}
BUG_ON(!sads);
for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) {
u32 value = 0;
drm/radeon/audio: fix missing multichannel PCM SAD in some cases The current code writing SADs to the audio registers seems to assume that there is at most a single SAD per audio format. However, that is not the case. Especially for PCM it is somewhat common for sinks to have two SADs, one for 8-channel and one for 2-channel audio, which may have different supported sample rates (i.e. the sink supports stereo audio at higher sample rates than multichannel audio). Because of this, only the 2-channel SAD may be used if it appears before the 8-channel SAD. Unless other SADs require otherwise, this may cause the ALSA HDA driver to allow stereo playback only. Fix the code to pick the PCM SAD with the highest number of channels, while merging the rate masks of PCM SADs with lower amount of channels into the additional stereo rate mask byte. Technically there are even more cases to handle (multiple non-PCM SADs of the same type, more than two PCM SADs with varying channel counts, etc), but those have not actually been encountered in the field and handling them would be non-trivial. Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo support and 96kHz 8-channel support (and other 8-channel compressed formats): 00ffffffffffff003dcb010000000001 ffff0103800000780a0dc9a057479827 12484c00000001010101010101010101 010101010101011d8018711c1620582c 2500c48e2100009e011d007251d01e20 6e285500c48e2100001e000000fc0054 582d53523637342020202020000000fd 00313d0f2e08000a202020202020019b 02032f724f8504030f0e07069413121e 1d1615012f097f070f1f071707503707 503f07c0834f000066030c00ffff808c 0ad08a20e02d10103e9600c48e210000 18011d80d0721c1620102c2580c48e21 00009e011d00bc52d01e20b8285540c4 8e2100001e8c0ad090204031200c4055 00c48e210000180000000000000000a8 Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Andre Heider <a.heider@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-29 06:19:16 +07:00
u8 stereo_freqs = 0;
int max_channels = -1;
int j;
for (j = 0; j < sad_count; j++) {
struct cea_sad *sad = &sads[j];
if (sad->format == eld_reg_to_type[i][1]) {
drm/radeon/audio: fix missing multichannel PCM SAD in some cases The current code writing SADs to the audio registers seems to assume that there is at most a single SAD per audio format. However, that is not the case. Especially for PCM it is somewhat common for sinks to have two SADs, one for 8-channel and one for 2-channel audio, which may have different supported sample rates (i.e. the sink supports stereo audio at higher sample rates than multichannel audio). Because of this, only the 2-channel SAD may be used if it appears before the 8-channel SAD. Unless other SADs require otherwise, this may cause the ALSA HDA driver to allow stereo playback only. Fix the code to pick the PCM SAD with the highest number of channels, while merging the rate masks of PCM SADs with lower amount of channels into the additional stereo rate mask byte. Technically there are even more cases to handle (multiple non-PCM SADs of the same type, more than two PCM SADs with varying channel counts, etc), but those have not actually been encountered in the field and handling them would be non-trivial. Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo support and 96kHz 8-channel support (and other 8-channel compressed formats): 00ffffffffffff003dcb010000000001 ffff0103800000780a0dc9a057479827 12484c00000001010101010101010101 010101010101011d8018711c1620582c 2500c48e2100009e011d007251d01e20 6e285500c48e2100001e000000fc0054 582d53523637342020202020000000fd 00313d0f2e08000a202020202020019b 02032f724f8504030f0e07069413121e 1d1615012f097f070f1f071707503707 503f07c0834f000066030c00ffff808c 0ad08a20e02d10103e9600c48e210000 18011d80d0721c1620102c2580c48e21 00009e011d00bc52d01e20b8285540c4 8e2100001e8c0ad090204031200c4055 00c48e210000180000000000000000a8 Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Andre Heider <a.heider@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-29 06:19:16 +07:00
if (sad->channels > max_channels) {
value = MAX_CHANNELS(sad->channels) |
DESCRIPTOR_BYTE_2(sad->byte2) |
SUPPORTED_FREQUENCIES(sad->freq);
max_channels = sad->channels;
}
if (sad->format == HDMI_AUDIO_CODING_TYPE_PCM)
drm/radeon/audio: fix missing multichannel PCM SAD in some cases The current code writing SADs to the audio registers seems to assume that there is at most a single SAD per audio format. However, that is not the case. Especially for PCM it is somewhat common for sinks to have two SADs, one for 8-channel and one for 2-channel audio, which may have different supported sample rates (i.e. the sink supports stereo audio at higher sample rates than multichannel audio). Because of this, only the 2-channel SAD may be used if it appears before the 8-channel SAD. Unless other SADs require otherwise, this may cause the ALSA HDA driver to allow stereo playback only. Fix the code to pick the PCM SAD with the highest number of channels, while merging the rate masks of PCM SADs with lower amount of channels into the additional stereo rate mask byte. Technically there are even more cases to handle (multiple non-PCM SADs of the same type, more than two PCM SADs with varying channel counts, etc), but those have not actually been encountered in the field and handling them would be non-trivial. Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo support and 96kHz 8-channel support (and other 8-channel compressed formats): 00ffffffffffff003dcb010000000001 ffff0103800000780a0dc9a057479827 12484c00000001010101010101010101 010101010101011d8018711c1620582c 2500c48e2100009e011d007251d01e20 6e285500c48e2100001e000000fc0054 582d53523637342020202020000000fd 00313d0f2e08000a202020202020019b 02032f724f8504030f0e07069413121e 1d1615012f097f070f1f071707503707 503f07c0834f000066030c00ffff808c 0ad08a20e02d10103e9600c48e210000 18011d80d0721c1620102c2580c48e21 00009e011d00bc52d01e20b8285540c4 8e2100001e8c0ad090204031200c4055 00c48e210000180000000000000000a8 Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Andre Heider <a.heider@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-29 06:19:16 +07:00
stereo_freqs |= sad->freq;
else
break;
}
}
drm/radeon/audio: fix missing multichannel PCM SAD in some cases The current code writing SADs to the audio registers seems to assume that there is at most a single SAD per audio format. However, that is not the case. Especially for PCM it is somewhat common for sinks to have two SADs, one for 8-channel and one for 2-channel audio, which may have different supported sample rates (i.e. the sink supports stereo audio at higher sample rates than multichannel audio). Because of this, only the 2-channel SAD may be used if it appears before the 8-channel SAD. Unless other SADs require otherwise, this may cause the ALSA HDA driver to allow stereo playback only. Fix the code to pick the PCM SAD with the highest number of channels, while merging the rate masks of PCM SADs with lower amount of channels into the additional stereo rate mask byte. Technically there are even more cases to handle (multiple non-PCM SADs of the same type, more than two PCM SADs with varying channel counts, etc), but those have not actually been encountered in the field and handling them would be non-trivial. Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo support and 96kHz 8-channel support (and other 8-channel compressed formats): 00ffffffffffff003dcb010000000001 ffff0103800000780a0dc9a057479827 12484c00000001010101010101010101 010101010101011d8018711c1620582c 2500c48e2100009e011d007251d01e20 6e285500c48e2100001e000000fc0054 582d53523637342020202020000000fd 00313d0f2e08000a202020202020019b 02032f724f8504030f0e07069413121e 1d1615012f097f070f1f071707503707 503f07c0834f000066030c00ffff808c 0ad08a20e02d10103e9600c48e210000 18011d80d0721c1620102c2580c48e21 00009e011d00bc52d01e20b8285540c4 8e2100001e8c0ad090204031200c4055 00c48e210000180000000000000000a8 Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Andre Heider <a.heider@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-29 06:19:16 +07:00
value |= SUPPORTED_FREQUENCIES_STEREO(stereo_freqs);
WREG32(eld_reg_to_type[i][0], value);
}
kfree(sads);
}
/*
* update the info frames with the data from the current display mode
*/
void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mode)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
struct hdmi_avi_infoframe frame;
uint32_t offset;
ssize_t err;
if (!dig || !dig->afmt)
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
offset = dig->afmt->offset;
r600_audio_set_dto(encoder, mode->clock);
WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
HDMI0_NULL_SEND); /* send null packets when required */
WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000);
if (ASIC_IS_DCE32(rdev)) {
WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset,
HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
HDMI0_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */
WREG32(AFMT_AUDIO_PACKET_CONTROL + offset,
AFMT_AUDIO_SAMPLE_SEND | /* send audio packets */
AFMT_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
} else {
WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset,
HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */
HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */
HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
}
if (ASIC_IS_DCE32(rdev)) {
dce3_2_afmt_write_speaker_allocation(encoder);
dce3_2_afmt_write_sad_regs(encoder);
}
WREG32(HDMI0_ACR_PACKET_CONTROL + offset,
HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */
HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
HDMI0_NULL_SEND | /* send null packets when required */
HDMI0_GC_SEND | /* send general control packets */
HDMI0_GC_CONT); /* send general control packets every frame */
/* TODO: HDMI0_AUDIO_INFO_UPDATE */
WREG32(HDMI0_INFOFRAME_CONTROL0 + offset,
HDMI0_AVI_INFO_SEND | /* enable AVI info frames */
HDMI0_AVI_INFO_CONT | /* send AVI info frames every frame/field */
HDMI0_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
HDMI0_AUDIO_INFO_CONT); /* send audio info frames every frame/field */
WREG32(HDMI0_INFOFRAME_CONTROL1 + offset,
HDMI0_AVI_INFO_LINE(2) | /* anything other than 0 */
HDMI0_AUDIO_INFO_LINE(2)); /* anything other than 0 */
WREG32(HDMI0_GC + offset, 0); /* unset HDMI0_GC_AVMUTE */
err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
if (err < 0) {
DRM_ERROR("failed to setup AVI infoframe: %zd\n", err);
return;
}
err = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer));
if (err < 0) {
DRM_ERROR("failed to pack AVI infoframe: %zd\n", err);
return;
}
r600_hdmi_update_avi_infoframe(encoder, buffer, sizeof(buffer));
r600_hdmi_update_ACR(encoder, mode->clock);
/* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */
WREG32(HDMI0_RAMP_CONTROL0 + offset, 0x00FFFFFF);
WREG32(HDMI0_RAMP_CONTROL1 + offset, 0x007FFFFF);
WREG32(HDMI0_RAMP_CONTROL2 + offset, 0x00000001);
WREG32(HDMI0_RAMP_CONTROL3 + offset, 0x00000001);
r600_hdmi_audio_workaround(encoder);
}
/*
* update settings with current parameters from audio engine
*/
void r600_hdmi_update_audio_settings(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
struct r600_audio_pin audio = r600_audio_status(rdev);
uint8_t buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AUDIO_INFOFRAME_SIZE];
struct hdmi_audio_infoframe frame;
uint32_t offset;
uint32_t iec;
ssize_t err;
if (!dig->afmt || !dig->afmt->enabled)
return;
offset = dig->afmt->offset;
DRM_DEBUG("%s with %d channels, %d Hz sampling rate, %d bits per sample,\n",
r600_hdmi_is_audio_buffer_filled(encoder) ? "playing" : "stopped",
audio.channels, audio.rate, audio.bits_per_sample);
DRM_DEBUG("0x%02X IEC60958 status bits and 0x%02X category code\n",
(int)audio.status_bits, (int)audio.category_code);
iec = 0;
if (audio.status_bits & AUDIO_STATUS_PROFESSIONAL)
iec |= 1 << 0;
if (audio.status_bits & AUDIO_STATUS_NONAUDIO)
iec |= 1 << 1;
if (audio.status_bits & AUDIO_STATUS_COPYRIGHT)
iec |= 1 << 2;
if (audio.status_bits & AUDIO_STATUS_EMPHASIS)
iec |= 1 << 3;
iec |= HDMI0_60958_CS_CATEGORY_CODE(audio.category_code);
switch (audio.rate) {
case 32000:
iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x3);
break;
case 44100:
iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x0);
break;
case 48000:
iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x2);
break;
case 88200:
iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x8);
break;
case 96000:
iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xa);
break;
case 176400:
iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xc);
break;
case 192000:
iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xe);
break;
}
WREG32(HDMI0_60958_0 + offset, iec);
iec = 0;
switch (audio.bits_per_sample) {
case 16:
iec |= HDMI0_60958_CS_WORD_LENGTH(0x2);
break;
case 20:
iec |= HDMI0_60958_CS_WORD_LENGTH(0x3);
break;
case 24:
iec |= HDMI0_60958_CS_WORD_LENGTH(0xb);
break;
}
if (audio.status_bits & AUDIO_STATUS_V)
iec |= 0x5 << 16;
WREG32_P(HDMI0_60958_1 + offset, iec, ~0x5000f);
err = hdmi_audio_infoframe_init(&frame);
if (err < 0) {
DRM_ERROR("failed to setup audio infoframe\n");
return;
}
frame.channels = audio.channels;
err = hdmi_audio_infoframe_pack(&frame, buffer, sizeof(buffer));
if (err < 0) {
DRM_ERROR("failed to pack audio infoframe\n");
return;
}
r600_hdmi_update_audio_infoframe(encoder, buffer, sizeof(buffer));
r600_hdmi_audio_workaround(encoder);
}
/*
* enable the HDMI engine
*/
void r600_hdmi_enable(struct drm_encoder *encoder, bool enable)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u32 hdmi = HDMI0_ERROR_ACK;
if (!dig || !dig->afmt)
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
if (enable && dig->afmt->enabled)
return;
if (!enable && !dig->afmt->enabled)
return;
if (enable)
dig->afmt->pin = r600_audio_get_pin(rdev);
else
dig->afmt->pin = NULL;
/* Older chipsets require setting HDMI and routing manually */
if (!ASIC_IS_DCE3(rdev)) {
if (enable)
hdmi |= HDMI0_ENABLE;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
if (enable) {
WREG32_OR(AVIVO_TMDSA_CNTL, AVIVO_TMDSA_CNTL_HDMI_EN);
hdmi |= HDMI0_STREAM(HDMI0_STREAM_TMDSA);
} else {
WREG32_AND(AVIVO_TMDSA_CNTL, ~AVIVO_TMDSA_CNTL_HDMI_EN);
}
break;
case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
if (enable) {
WREG32_OR(AVIVO_LVTMA_CNTL, AVIVO_LVTMA_CNTL_HDMI_EN);
hdmi |= HDMI0_STREAM(HDMI0_STREAM_LVTMA);
} else {
WREG32_AND(AVIVO_LVTMA_CNTL, ~AVIVO_LVTMA_CNTL_HDMI_EN);
}
break;
case ENCODER_OBJECT_ID_INTERNAL_DDI:
if (enable) {
WREG32_OR(DDIA_CNTL, DDIA_HDMI_EN);
hdmi |= HDMI0_STREAM(HDMI0_STREAM_DDIA);
} else {
WREG32_AND(DDIA_CNTL, ~DDIA_HDMI_EN);
}
break;
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
if (enable)
hdmi |= HDMI0_STREAM(HDMI0_STREAM_DVOA);
break;
default:
dev_err(rdev->dev, "Invalid encoder for HDMI: 0x%X\n",
radeon_encoder->encoder_id);
break;
}
WREG32(HDMI0_CONTROL + dig->afmt->offset, hdmi);
}
if (rdev->irq.installed) {
/* if irq is available use it */
/* XXX: shouldn't need this on any asics. Double check DCE2/3 */
if (enable)
radeon_irq_kms_enable_afmt(rdev, dig->afmt->id);
else
radeon_irq_kms_disable_afmt(rdev, dig->afmt->id);
}
dig->afmt->enabled = enable;
DRM_DEBUG("%sabling HDMI interface @ 0x%04X for encoder 0x%x\n",
enable ? "En" : "Dis", dig->afmt->offset, radeon_encoder->encoder_id);
}