AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 21:15:44 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
3e3148c511
linux_dsm_epyc7002/net/ipv4/xfrm4_output.c

112 lines
2.5 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*
* xfrm4_output.c - Common IPsec encapsulation code for IPv4.
* Copyright (c) 2004 Herbert Xu <herbert@gondor.apana.org.au>
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 21:24:47 +07:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 17:08:03 +07:00
#include <linux/if_ether.h>
#include <linux/kernel.h>
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 12:40:52 +07:00
#include <linux/module.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <linux/skbuff.h>
[XFRM]: Netfilter IPsec output hooks Call netfilter hooks before IPsec transforms. Packets visit the FORWARD/LOCAL_OUT and POST_ROUTING hook before the first encapsulation and the LOCAL_OUT and POST_ROUTING hook before each following tunnel mode transform. Patch from Herbert Xu <herbert@gondor.apana.org.au>: Move the loop from dst_output into xfrm4_output/xfrm6_output since they're the only ones who need to it. xfrm{4,6}_output_one() processes the first SA all subsequent transport mode SAs and is called in a loop that calls the netfilter hooks between each two calls. In order to avoid the tail call issue, I've added the inline function nf_hook which is nf_hook_slow plus the empty list check. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-07 14:01:48 +07:00
#include <linux/netfilter_ipv4.h>
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 12:40:52 +07:00
#include <net/dst.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <net/ip.h>
#include <net/xfrm.h>
#include <net/icmp.h>
static int xfrm4_tunnel_check_size(struct sk_buff *skb)
{
int mtu, ret = 0;
if (IPCB(skb)->flags & IPSKB_XFRM_TUNNEL_SIZE)
goto out;
net: rename local_df to ignore_df As suggested by several people, rename local_df to ignore_df, since it means "ignore df bit if it is set". Cc: Maciej Żenczykowski <maze@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05 06:39:18 +07:00
if (!(ip_hdr(skb)->frag_off & htons(IP_DF)) || skb->ignore_df)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
goto out;
xfrm: revert ipv4 mtu determination to dst_mtu In commit 0ea9d5e3e0e03a63b11392f5613378977dae7eca ("xfrm: introduce helper for safe determination of mtu") I switched the determination of ipv4 mtus from dst_mtu to ip_skb_dst_mtu. This was an error because in case of IP_PMTUDISC_PROBE we fall back to the interface mtu, which is never correct for ipv4 ipsec. This patch partly reverts 0ea9d5e3e0e03a63b11392f5613378977dae7eca ("xfrm: introduce helper for safe determination of mtu"). Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-08-26 17:31:19 +07:00
mtu = dst_mtu(skb_dst(skb));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (skb->len > mtu) {
xfrm4: Don't call icmp_send on local error Calling icmp_send() on a local message size error leads to an incorrect update of the path mtu. So use ip_local_error() instead to notify the socket about the error. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30 06:20:41 +07:00
if (skb->sk)
xfrm: make local error reporting more robust In xfrm4 and xfrm6 we need to take care about sockets of the other address family. This could happen because a 6in4 or 4in6 tunnel could get protected by ipsec. Because we don't want to have a run-time dependency on ipv6 when only using ipv4 xfrm we have to embed a pointer to the correct local_error function in xfrm_state_afinet and look it up when returning an error depending on the socket address family. Thanks to vi0ss for the great bug report: <https://bugzilla.kernel.org/show_bug.cgi?id=58691> v2: a) fix two more unsafe interpretations of skb->sk as ipv6 socket (xfrm6_local_dontfrag and __xfrm6_output) v3: a) add an EXPORT_SYMBOL_GPL(xfrm_local_error) to fix a link error when building ipv6 as a module (thanks to Steffen Klassert) Reported-by: <vi0oss@gmail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-08-14 18:05:23 +07:00
xfrm_local_error(skb, mtu);
xfrm4: Don't call icmp_send on local error Calling icmp_send() on a local message size error leads to an incorrect update of the path mtu. So use ip_local_error() instead to notify the socket about the error. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30 06:20:41 +07:00
else
icmp_send(skb, ICMP_DEST_UNREACH,
ICMP_FRAG_NEEDED, htonl(mtu));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
ret = -EMSGSIZE;
}
out:
return ret;
}
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 12:40:52 +07:00
int xfrm4_extract_output(struct xfrm_state *x, struct sk_buff *skb)
{
int err;
err = xfrm4_tunnel_check_size(skb);
if (err)
return err;
[IPSEC]: Remove nhoff from xfrm_input The nhoff field isn't actually necessary in xfrm_input. For tunnel mode transforms we now throw away the output IP header so it makes no sense to fill in the nexthdr field. For transport mode we can now let the function transport_finish do the setting and it knows where the nexthdr field is. The only other thing that needs the nexthdr field to be set is the header extraction code. However, we can simply move the protocol extraction out of the generic header extraction. We want to minimise the amount of info we have to carry around between transforms as this simplifies the resumption process for async crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-20 09:47:58 +07:00
XFRM_MODE_SKB_CB(skb)->protocol = ip_hdr(skb)->protocol;
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 12:40:52 +07:00
return xfrm4_extract_header(skb);
}
int xfrm4_prepare_output(struct xfrm_state *x, struct sk_buff *skb)
{
int err;
[IPSEC]: Fix inter address family IPsec tunnel handling. Signed-off-by: Kazunori MIYAZAWA <kazunori@miyazawa.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25 04:51:51 +07:00
err = xfrm_inner_extract_output(x, skb);
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 12:40:52 +07:00
if (err)
return err;
xfrm: Fix crash with ipv6 IPsec tunnel and NAT. The ipv6 xfrm output path is not aware that packets can be rerouted by NAT to not use IPsec. We crash in this case because we expect to have a xfrm state at the dst_entry. This crash happens if the ipv6 layer does IPsec and NAT or if we have an interfamily IPsec tunnel with ipv4 NAT. We fix this by checking for a NAT rerouted packet in each address family and dst_output() to the new destination in this case. Reported-by: Martin Pelikan <martin.pelikan@gmail.com> Tested-by: Martin Pelikan <martin.pelikan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-07 13:08:52 +07:00
IPCB(skb)->flags |= IPSKB_XFRM_TUNNEL_SIZE;
xfrm: Fix local error reporting crash with interfamily tunnels We set the outer mode protocol too early. As a result, the local error handler might dispatch to the wrong address family and report the error to a wrong socket type. We fix this by setting the outer protocol to the skb after we accessed the inner mode for the last time, right before we do the atcual encapsulation where we switch finally to the outer mode. Reported-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Tested-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-01-12 19:38:49 +07:00
skb->protocol = htons(ETH_P_IP);
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 12:40:52 +07:00
return x->outer_mode->output2(x, skb);
}
EXPORT_SYMBOL(xfrm4_prepare_output);
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 09:19:04 +07:00
int xfrm4_output_finish(struct sock *sk, struct sk_buff *skb)
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 17:08:03 +07:00
{
xfrm: Fix crash with ipv6 IPsec tunnel and NAT. The ipv6 xfrm output path is not aware that packets can be rerouted by NAT to not use IPsec. We crash in this case because we expect to have a xfrm state at the dst_entry. This crash happens if the ipv6 layer does IPsec and NAT or if we have an interfamily IPsec tunnel with ipv4 NAT. We fix this by checking for a NAT rerouted packet in each address family and dst_output() to the new destination in this case. Reported-by: Martin Pelikan <martin.pelikan@gmail.com> Tested-by: Martin Pelikan <martin.pelikan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-07 13:08:52 +07:00
memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
#ifdef CONFIG_NETFILTER
IPCB(skb)->flags |= IPSKB_XFRM_TRANSFORMED;
#endif
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 09:19:04 +07:00
return xfrm_output(sk, skb);
xfrm: Fix crash with ipv6 IPsec tunnel and NAT. The ipv6 xfrm output path is not aware that packets can be rerouted by NAT to not use IPsec. We crash in this case because we expect to have a xfrm state at the dst_entry. This crash happens if the ipv6 layer does IPsec and NAT or if we have an interfamily IPsec tunnel with ipv4 NAT. We fix this by checking for a NAT rerouted packet in each address family and dst_output() to the new destination in this case. Reported-by: Martin Pelikan <martin.pelikan@gmail.com> Tested-by: Martin Pelikan <martin.pelikan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-07 13:08:52 +07:00
}
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 09:19:04 +07:00
static int __xfrm4_output(struct sock *sk, struct sk_buff *skb)
xfrm: Fix crash with ipv6 IPsec tunnel and NAT. The ipv6 xfrm output path is not aware that packets can be rerouted by NAT to not use IPsec. We crash in this case because we expect to have a xfrm state at the dst_entry. This crash happens if the ipv6 layer does IPsec and NAT or if we have an interfamily IPsec tunnel with ipv4 NAT. We fix this by checking for a NAT rerouted packet in each address family and dst_output() to the new destination in this case. Reported-by: Martin Pelikan <martin.pelikan@gmail.com> Tested-by: Martin Pelikan <martin.pelikan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-07 13:08:52 +07:00
{
struct xfrm_state *x = skb_dst(skb)->xfrm;
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 17:08:03 +07:00
#ifdef CONFIG_NETFILTER
xfrm: Fix crash with ipv6 IPsec tunnel and NAT. The ipv6 xfrm output path is not aware that packets can be rerouted by NAT to not use IPsec. We crash in this case because we expect to have a xfrm state at the dst_entry. This crash happens if the ipv6 layer does IPsec and NAT or if we have an interfamily IPsec tunnel with ipv4 NAT. We fix this by checking for a NAT rerouted packet in each address family and dst_output() to the new destination in this case. Reported-by: Martin Pelikan <martin.pelikan@gmail.com> Tested-by: Martin Pelikan <martin.pelikan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-07 13:08:52 +07:00
if (!x) {
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 17:08:03 +07:00
IPCB(skb)->flags |= IPSKB_REROUTED;
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 09:19:04 +07:00
return dst_output_sk(sk, skb);
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 17:08:03 +07:00
}
[IPSEC]: Merge most of the output path As part of the work on asynchrnous cryptographic operations, we need to be able to resume from the spot where they occur. As such, it helps if we isolate them to one spot. This patch moves most of the remaining family-specific processing into the common output code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 12:43:11 +07:00
#endif
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 17:08:03 +07:00
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 09:19:04 +07:00
return x->outer_mode->afinfo->output_finish(sk, skb);
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 17:08:03 +07:00
}
ipv4: add a sock pointer to dst->output() path. In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c922d55 ("vxlan: keep original skb ownership") Reported-by: lucien xin <lucien.xin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16 00:47:15 +07:00
int xfrm4_output(struct sock *sk, struct sk_buff *skb)
[XFRM]: Netfilter IPsec output hooks Call netfilter hooks before IPsec transforms. Packets visit the FORWARD/LOCAL_OUT and POST_ROUTING hook before the first encapsulation and the LOCAL_OUT and POST_ROUTING hook before each following tunnel mode transform. Patch from Herbert Xu <herbert@gondor.apana.org.au>: Move the loop from dst_output into xfrm4_output/xfrm6_output since they're the only ones who need to it. xfrm{4,6}_output_one() processes the first SA all subsequent transport mode SAs and is called in a loop that calls the netfilter hooks between each two calls. In order to avoid the tail call issue, I've added the inline function nf_hook which is nf_hook_slow plus the empty list check. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-07 14:01:48 +07:00
{
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 09:19:04 +07:00
return NF_HOOK_COND(NFPROTO_IPV4, NF_INET_POST_ROUTING, sk, skb,
xfrm: Fix crash with ipv6 IPsec tunnel and NAT. The ipv6 xfrm output path is not aware that packets can be rerouted by NAT to not use IPsec. We crash in this case because we expect to have a xfrm state at the dst_entry. This crash happens if the ipv6 layer does IPsec and NAT or if we have an interfamily IPsec tunnel with ipv4 NAT. We fix this by checking for a NAT rerouted packet in each address family and dst_output() to the new destination in this case. Reported-by: Martin Pelikan <martin.pelikan@gmail.com> Tested-by: Martin Pelikan <martin.pelikan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-07 13:08:52 +07:00
NULL, skb_dst(skb)->dev, __xfrm4_output,
[XFRM]: Fix SNAT-related crash in xfrm4_output_finish When a packet matching an IPsec policy is SNATed so it doesn't match any policy anymore it looses its xfrm bundle, which makes xfrm4_output_finish crash because of a NULL pointer dereference. This patch directs these packets to the original output path instead. Since the packets have already passed the POST_ROUTING hook, but need to start at the beginning of the original output path which includes another POST_ROUTING invocation, a flag is added to the IPCB to indicate that the packet was rerouted and doesn't need to pass the POST_ROUTING hook again. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-16 06:10:22 +07:00
!(IPCB(skb)->flags & IPSKB_REROUTED));
[XFRM]: Netfilter IPsec output hooks Call netfilter hooks before IPsec transforms. Packets visit the FORWARD/LOCAL_OUT and POST_ROUTING hook before the first encapsulation and the LOCAL_OUT and POST_ROUTING hook before each following tunnel mode transform. Patch from Herbert Xu <herbert@gondor.apana.org.au>: Move the loop from dst_output into xfrm4_output/xfrm6_output since they're the only ones who need to it. xfrm{4,6}_output_one() processes the first SA all subsequent transport mode SAs and is called in a loop that calls the netfilter hooks between each two calls. In order to avoid the tail call issue, I've added the inline function nf_hook which is nf_hook_slow plus the empty list check. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-07 14:01:48 +07:00
}
xfrm: make local error reporting more robust In xfrm4 and xfrm6 we need to take care about sockets of the other address family. This could happen because a 6in4 or 4in6 tunnel could get protected by ipsec. Because we don't want to have a run-time dependency on ipv6 when only using ipv4 xfrm we have to embed a pointer to the correct local_error function in xfrm_state_afinet and look it up when returning an error depending on the socket address family. Thanks to vi0ss for the great bug report: <https://bugzilla.kernel.org/show_bug.cgi?id=58691> v2: a) fix two more unsafe interpretations of skb->sk as ipv6 socket (xfrm6_local_dontfrag and __xfrm6_output) v3: a) add an EXPORT_SYMBOL_GPL(xfrm_local_error) to fix a link error when building ipv6 as a module (thanks to Steffen Klassert) Reported-by: <vi0oss@gmail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-08-14 18:05:23 +07:00
void xfrm4_local_error(struct sk_buff *skb, u32 mtu)
{
struct iphdr *hdr;
hdr = skb->encapsulation ? inner_ip_hdr(skb) : ip_hdr(skb);
ip_local_error(skb->sk, EMSGSIZE, hdr->daddr,
inet_sk(skb->sk)->inet_dport, mtu);
}
Reference in New Issue Copy Permalink