AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-17 01:49:22 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
3db8d37dd8
linux_dsm_epyc7002/drivers/iio/imu/adis_buffer.c

172 lines
4.2 KiB
C
Raw Normal View History

staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
/*
* Common library for ADIS16XXX devices
*
* Copyright 2012 Analog Devices Inc.
* Author: Lars-Peter Clausen <lars@metafoo.de>
*
* Licensed under the GPL-2 or later.
*/
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger_consumer.h>
staging:iio:adis_lib: Use triggered buffer setup helper function Use the triggered buffer helper functions to setup and tear down the buffer for the adis library instead of doing this manually. This also means that we switch away from the deprecated sw_ring buffer and use the kfifo buffer now instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
#include <linux/iio/triggered_buffer.h>
staging:iio: Move adis library out of staging Now that the adis library no longer depends on the sw_ring buffer implementation we can move it out of staging. While we are at it also sort the entries in the iio Kconfig and Makefile to be in alphabetical order. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
#include <linux/iio/imu/adis.h>
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
int adis_update_scan_mode(struct iio_dev *indio_dev,
const unsigned long *scan_mask)
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
{
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
struct adis *adis = iio_device_get_drvdata(indio_dev);
const struct iio_chan_spec *chan;
unsigned int scan_count;
unsigned int i, j;
__be16 *tx, *rx;
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
kfree(adis->xfer);
kfree(adis->buffer);
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
scan_count = indio_dev->scan_bytes / 2;
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
adis->xfer = kcalloc(scan_count + 1, sizeof(*adis->xfer), GFP_KERNEL);
if (!adis->xfer)
return -ENOMEM;
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 04:03:40 +07:00
adis->buffer = kcalloc(indio_dev->scan_bytes, 2, GFP_KERNEL);
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
if (!adis->buffer)
return -ENOMEM;
rx = adis->buffer;
iio: adis_buffer: Fix out-of-bounds memory access The SPI tx and rx buffers are both supposed to be scan_bytes amount of bytes large and a common allocation is used to allocate both buffers. This puts the beginning of the tx buffer scan_bytes bytes after the rx buffer. The initialization of the tx buffer pointer is done adding scan_bytes to the beginning of the rx buffer, but since the rx buffer is of type __be16 this will actually add two times as much and the tx buffer ends up pointing after the allocated buffer. Fix this by using scan_count, which is scan_bytes / 2, instead of scan_bytes when initializing the tx buffer pointer. Fixes: aacff892cbd5 ("staging:iio:adis: Preallocate transfer message") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-27 20:55:56 +07:00
tx = rx + scan_count;
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
spi_message_init(&adis->msg);
for (j = 0; j <= scan_count; j++) {
adis->xfer[j].bits_per_word = 8;
if (j != scan_count)
adis->xfer[j].cs_change = 1;
adis->xfer[j].len = 2;
adis->xfer[j].delay_usecs = adis->data->read_delay;
if (j < scan_count)
adis->xfer[j].tx_buf = &tx[j];
if (j >= 1)
adis->xfer[j].rx_buf = &rx[j - 1];
spi_message_add_tail(&adis->xfer[j], &adis->msg);
}
chan = indio_dev->channels;
for (i = 0; i < indio_dev->num_channels; i++, chan++) {
if (!test_bit(chan->scan_index, scan_mask))
continue;
iio:imu:adis: Add support for 32bit registers Some of the newer generation devices from the ADIS16XXX family have 32bit wide register which spans two 16bit wide registers. This patch adds support for reading and writing a 32bit wide register. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-20 20:36:00 +07:00
if (chan->scan_type.storagebits == 32)
*tx++ = cpu_to_be16((chan->address + 2) << 8);
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
*tx++ = cpu_to_be16(chan->address << 8);
}
return 0;
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
}
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
EXPORT_SYMBOL_GPL(adis_update_scan_mode);
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
static irqreturn_t adis_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct adis *adis = iio_device_get_drvdata(indio_dev);
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
int ret;
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
if (!adis->buffer)
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
return -ENOMEM;
iio:imu:adis: Add paging support Some of the newer generation devices from the ADIS16XXX series have more registers than what can be supported with the current register addressing scheme. These devices implement register paging to support a larger register range. Each page is 128 registers large and the currently active page can be selected via register 0x00 in each page. This patch implements transparent paging inside the common adis library. The register read/write interface stays the same and when a register is accessed the library automatically switches to the correct page if it is not already selected. The page number is encoded in the upper bits of the register number, e.g. register 0x5 of page 1 is 0x85. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-20 20:36:00 +07:00
if (adis->data->has_paging) {
mutex_lock(&adis->txrx_lock);
if (adis->current_page != 0) {
adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
adis->tx[1] = 0;
spi_write(adis->spi, adis->tx, 2);
}
}
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
ret = spi_sync(adis->spi, &adis->msg);
if (ret)
dev_err(&adis->spi->dev, "Failed to read data: %d", ret);
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
iio:imu:adis: Add paging support Some of the newer generation devices from the ADIS16XXX series have more registers than what can be supported with the current register addressing scheme. These devices implement register paging to support a larger register range. Each page is 128 registers large and the currently active page can be selected via register 0x00 in each page. This patch implements transparent paging inside the common adis library. The register read/write interface stays the same and when a register is accessed the library automatically switches to the correct page if it is not already selected. The page number is encoded in the upper bits of the register number, e.g. register 0x5 of page 1 is 0x85. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-20 20:36:00 +07:00
if (adis->data->has_paging) {
adis->current_page = 0;
mutex_unlock(&adis->txrx_lock);
}
iio:adis_lib: Use iio_push_to_buffers_with_timestamp() Makes the code a bit shorter and less ugly. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-19 19:59:00 +07:00
iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer,
pf->timestamp);
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
/**
* adis_setup_buffer_and_trigger() - Sets up buffer and trigger for the adis device
* @adis: The adis device.
* @indio_dev: The IIO device.
* @trigger_handler: Optional trigger handler, may be NULL.
*
* Returns 0 on success, a negative error code otherwise.
*
* This function sets up the buffer and trigger for a adis devices. If
* 'trigger_handler' is NULL the default trigger handler will be used. The
* default trigger handler will simply read the registers assigned to the
* currently active channels.
*
* adis_cleanup_buffer_and_trigger() should be called to free the resources
* allocated by this function.
*/
int adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
irqreturn_t (*trigger_handler)(int, void *))
{
int ret;
staging:iio:adis_lib: Use triggered buffer setup helper function Use the triggered buffer helper functions to setup and tear down the buffer for the adis library instead of doing this manually. This also means that we switch away from the deprecated sw_ring buffer and use the kfifo buffer now instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
if (!trigger_handler)
trigger_handler = adis_trigger_handler;
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
trigger_handler, NULL);
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
if (ret)
return ret;
if (adis->spi->irq) {
ret = adis_probe_trigger(adis, indio_dev);
if (ret)
staging:iio:adis_lib: Use triggered buffer setup helper function Use the triggered buffer helper functions to setup and tear down the buffer for the adis library instead of doing this manually. This also means that we switch away from the deprecated sw_ring buffer and use the kfifo buffer now instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
goto error_buffer_cleanup;
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
}
return 0;
staging:iio:adis_lib: Use triggered buffer setup helper function Use the triggered buffer helper functions to setup and tear down the buffer for the adis library instead of doing this manually. This also means that we switch away from the deprecated sw_ring buffer and use the kfifo buffer now instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
error_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
return ret;
}
EXPORT_SYMBOL_GPL(adis_setup_buffer_and_trigger);
/**
* adis_cleanup_buffer_and_trigger() - Free buffer and trigger resources
* @adis: The adis device.
* @indio_dev: The IIO device.
*
* Frees resources allocated by adis_setup_buffer_and_trigger()
*/
void adis_cleanup_buffer_and_trigger(struct adis *adis,
struct iio_dev *indio_dev)
{
if (adis->spi->irq)
adis_remove_trigger(adis);
staging:iio:adis: Preallocate transfer message Currently the driver reads out all sample registers of the device and throws away those which it does not need. Furthermore the SPI message is constructed each time the trigger handler is run, although it will be the same each time. This patch preallocates and pre-constructs the SPI message in the "update_scan_mode" callback. Only those register which are actually selected for sampling are included in the message. The patch also gets rid of the conversion of the sample data from big endian to the native endianness and instead marks the channel as big endian in its scan type. This allows to directly push the SPI transfer buffer to the IIO buffer without the need to post-process it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
kfree(adis->buffer);
kfree(adis->xfer);
staging:iio:adis_lib: Use triggered buffer setup helper function Use the triggered buffer helper functions to setup and tear down the buffer for the adis library instead of doing this manually. This also means that we switch away from the deprecated sw_ring buffer and use the kfifo buffer now instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
iio_triggered_buffer_cleanup(indio_dev);
staging:iio: Add common ADIS library A lot of the devices from the ADIS family use the same methods for accessing registers, sampling data and trigger handling. They also have similar register layout for the control registers. This patch adds a common library for these devices. The library implements functions for reading and writing registers as buffer and trigger management. It also provides a set functions for accessing the control registers and for running the devices internal self-test. Having this common library code will allow us to remove a lot of duplicated code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 20:28:00 +07:00
}
EXPORT_SYMBOL_GPL(adis_cleanup_buffer_and_trigger);
Reference in New Issue Copy Permalink