linux_dsm_epyc7002/kernel/trace/trace_events.c

3732 lines
86 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* event tracer
*
* Copyright (C) 2008 Red Hat Inc, Steven Rostedt <srostedt@redhat.com>
*
* - Added format output of fields of the trace point.
* This was based off of work by Tom Zanussi <tzanussi@gmail.com>.
*
*/
#define pr_fmt(fmt) fmt
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
#include <linux/workqueue.h>
#include <linux/security.h>
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
#include <linux/spinlock.h>
#include <linux/kthread.h>
#include <linux/tracefs.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/sort.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
#include <linux/delay.h>
#include <trace/events/sched.h>
ftrace: Rework event_create_dir() Rework event_create_dir() to use an array of static data instead of function pointers where possible. The problem is that it would call the function pointer on module load before parse_args(), possibly even before jump_labels were initialized. Luckily the generated functions don't use jump_labels but it still seems fragile. It also gets in the way of changing when we make the module map executable. The generated function are basically calling trace_define_field() with a bunch of static arguments. So instead of a function, capture these arguments in a static array, avoiding the function call. Now there are a number of cases where the fields are dynamic (syscall arguments, kprobes and uprobes), in which case a static array does not work, for these we preserve the function call. Luckily all these cases are not related to modules and so we can retain the function call for them. Also fix up all broken tracepoint definitions that now generate a compile error. Tested-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191111132458.342979914@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-25 03:26:59 +07:00
#include <trace/syscall.h>
#include <asm/setup.h>
#include "trace_output.h"
#undef TRACE_SYSTEM
#define TRACE_SYSTEM "TRACE_SYSTEM"
DEFINE_MUTEX(event_mutex);
LIST_HEAD(ftrace_events);
static LIST_HEAD(ftrace_generic_fields);
static LIST_HEAD(ftrace_common_fields);
tracing: Use kmem_cache_alloc instead of kmalloc in trace_events.c The event structures used by the trace events are mostly persistent, but they are also allocated by kmalloc, which is not the best at allocating space for what is used. By converting these kmallocs into kmem_cache_allocs, we can save over 50K of space that is permanently allocated. After boot we have: slab name active allocated size --------- ------ --------- ---- ftrace_event_file 979 1005 56 67 1 ftrace_event_field 2301 2310 48 77 1 The ftrace_event_file has at boot up 979 active objects out of 1005 allocated in the slabs. Each object is 56 bytes. In a normal kmalloc, that would allocate 64 bytes for each object. 1005 - 979 = 26 objects not used 26 * 56 = 1456 bytes wasted But if we used kmalloc: 64 - 56 = 8 bytes unused per allocation 8 * 979 = 7832 bytes wasted 7832 - 1456 = 6376 bytes in savings Doing the same for ftrace_event_field where there's 2301 objects allocated in a slab that can hold 2310 with 48 bytes each we have: 2310 - 2301 = 9 objects not used 9 * 48 = 432 bytes wasted A kmalloc would also use 64 bytes per object: 64 - 48 = 16 bytes unused per allocation 16 * 2301 = 36816 bytes wasted! 36816 - 432 = 36384 bytes in savings This change gives us a total of 42760 bytes in savings. At least on my machine, but as there's a lot of these persistent objects for all configurations that use trace points, this is a net win. Thanks to Ezequiel Garcia for his trace_analyze presentation which pointed out the wasted space in my code. Cc: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-28 08:23:57 +07:00
#define GFP_TRACE (GFP_KERNEL | __GFP_ZERO)
static struct kmem_cache *field_cachep;
static struct kmem_cache *file_cachep;
tracing: Failed to create system directory Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca073c37 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Cc: stable@vger.kernel.org # 3.10 Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-27 21:58:31 +07:00
static inline int system_refcount(struct event_subsystem *system)
{
return system->ref_count;
tracing: Failed to create system directory Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca073c37 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Cc: stable@vger.kernel.org # 3.10 Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-27 21:58:31 +07:00
}
static int system_refcount_inc(struct event_subsystem *system)
{
return system->ref_count++;
tracing: Failed to create system directory Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca073c37 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Cc: stable@vger.kernel.org # 3.10 Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-27 21:58:31 +07:00
}
static int system_refcount_dec(struct event_subsystem *system)
{
return --system->ref_count;
tracing: Failed to create system directory Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca073c37 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Cc: stable@vger.kernel.org # 3.10 Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-27 21:58:31 +07:00
}
/* Double loops, do not use break, only goto's work */
#define do_for_each_event_file(tr, file) \
list_for_each_entry(tr, &ftrace_trace_arrays, list) { \
list_for_each_entry(file, &tr->events, list)
#define do_for_each_event_file_safe(tr, file) \
list_for_each_entry(tr, &ftrace_trace_arrays, list) { \
struct trace_event_file *___n; \
list_for_each_entry_safe(file, ___n, &tr->events, list)
#define while_for_each_event_file() \
}
static struct ftrace_event_field *
__find_event_field(struct list_head *head, char *name)
{
struct ftrace_event_field *field;
list_for_each_entry(field, head, link) {
if (!strcmp(field->name, name))
return field;
}
return NULL;
}
struct ftrace_event_field *
trace_find_event_field(struct trace_event_call *call, char *name)
{
struct ftrace_event_field *field;
struct list_head *head;
head = trace_get_fields(call);
field = __find_event_field(head, name);
if (field)
return field;
field = __find_event_field(&ftrace_generic_fields, name);
if (field)
return field;
return __find_event_field(&ftrace_common_fields, name);
}
static int __trace_define_field(struct list_head *head, const char *type,
const char *name, int offset, int size,
int is_signed, int filter_type)
{
struct ftrace_event_field *field;
tracing: Use kmem_cache_alloc instead of kmalloc in trace_events.c The event structures used by the trace events are mostly persistent, but they are also allocated by kmalloc, which is not the best at allocating space for what is used. By converting these kmallocs into kmem_cache_allocs, we can save over 50K of space that is permanently allocated. After boot we have: slab name active allocated size --------- ------ --------- ---- ftrace_event_file 979 1005 56 67 1 ftrace_event_field 2301 2310 48 77 1 The ftrace_event_file has at boot up 979 active objects out of 1005 allocated in the slabs. Each object is 56 bytes. In a normal kmalloc, that would allocate 64 bytes for each object. 1005 - 979 = 26 objects not used 26 * 56 = 1456 bytes wasted But if we used kmalloc: 64 - 56 = 8 bytes unused per allocation 8 * 979 = 7832 bytes wasted 7832 - 1456 = 6376 bytes in savings Doing the same for ftrace_event_field where there's 2301 objects allocated in a slab that can hold 2310 with 48 bytes each we have: 2310 - 2301 = 9 objects not used 9 * 48 = 432 bytes wasted A kmalloc would also use 64 bytes per object: 64 - 48 = 16 bytes unused per allocation 16 * 2301 = 36816 bytes wasted! 36816 - 432 = 36384 bytes in savings This change gives us a total of 42760 bytes in savings. At least on my machine, but as there's a lot of these persistent objects for all configurations that use trace points, this is a net win. Thanks to Ezequiel Garcia for his trace_analyze presentation which pointed out the wasted space in my code. Cc: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-28 08:23:57 +07:00
field = kmem_cache_alloc(field_cachep, GFP_TRACE);
if (!field)
return -ENOMEM;
field->name = name;
field->type = type;
if (filter_type == FILTER_OTHER)
field->filter_type = filter_assign_type(type);
else
field->filter_type = filter_type;
field->offset = offset;
field->size = size;
field->is_signed = is_signed;
tracing: Move fields from event to class structure Move the defined fields from the event to the class structure. Since the fields of the event are defined by the class they belong to, it makes sense to have the class hold the information instead of the individual events. The events of the same class would just hold duplicate information. After this change the size of the kernel dropped another 3K: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900252 1057412 861512 6819176 680d68 vmlinux.regs 4900375 1053380 861512 6815267 67fe23 vmlinux.fields Although the text increased, this was mainly due to the C files having to adapt to the change. This is a constant increase, where new tracepoints will not increase the Text. But the big drop is in the data size (as well as needed allocations to hold the fields). This will give even more savings as more tracepoints are created. Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS() with several DEFINE_EVENT()s, then the savings will be lost. But we are pushing developers to consolidate events with DEFINE_EVENT() so this should not be an issue. The kprobes define a unique class to every new event, but are dynamic so it should not be a issue. The syscalls however have a single class but the fields for the individual events are different. The syscalls use a metadata to define the fields. I moved the fields list from the event to the metadata and added a "get_fields()" function to the class. This function is used to find the fields. For normal events and kprobes, get_fields() just returns a pointer to the fields list_head in the class. For syscall events, it returns the fields list_head in the metadata for the event. v2: Fixed the syscall fields. The syscall metadata needs a list of fields for both enter and exit. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-22 21:35:55 +07:00
list_add(&field->link, head);
return 0;
}
int trace_define_field(struct trace_event_call *call, const char *type,
const char *name, int offset, int size, int is_signed,
int filter_type)
{
struct list_head *head;
if (WARN_ON(!call->class))
return 0;
head = trace_get_fields(call);
return __trace_define_field(head, type, name, offset, size,
is_signed, filter_type);
}
EXPORT_SYMBOL_GPL(trace_define_field);
#define __generic_field(type, item, filter_type) \
ret = __trace_define_field(&ftrace_generic_fields, #type, \
#item, 0, 0, is_signed_type(type), \
filter_type); \
if (ret) \
return ret;
#define __common_field(type, item) \
ret = __trace_define_field(&ftrace_common_fields, #type, \
"common_" #item, \
offsetof(typeof(ent), item), \
sizeof(ent.item), \
is_signed_type(type), FILTER_OTHER); \
if (ret) \
return ret;
static int trace_define_generic_fields(void)
{
int ret;
__generic_field(int, CPU, FILTER_CPU);
__generic_field(int, cpu, FILTER_CPU);
__generic_field(char *, COMM, FILTER_COMM);
__generic_field(char *, comm, FILTER_COMM);
return ret;
}
static int trace_define_common_fields(void)
{
int ret;
struct trace_entry ent;
__common_field(unsigned short, type);
__common_field(unsigned char, flags);
__common_field(unsigned char, preempt_count);
__common_field(int, pid);
return ret;
}
static void trace_destroy_fields(struct trace_event_call *call)
{
struct ftrace_event_field *field, *next;
tracing: Move fields from event to class structure Move the defined fields from the event to the class structure. Since the fields of the event are defined by the class they belong to, it makes sense to have the class hold the information instead of the individual events. The events of the same class would just hold duplicate information. After this change the size of the kernel dropped another 3K: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900252 1057412 861512 6819176 680d68 vmlinux.regs 4900375 1053380 861512 6815267 67fe23 vmlinux.fields Although the text increased, this was mainly due to the C files having to adapt to the change. This is a constant increase, where new tracepoints will not increase the Text. But the big drop is in the data size (as well as needed allocations to hold the fields). This will give even more savings as more tracepoints are created. Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS() with several DEFINE_EVENT()s, then the savings will be lost. But we are pushing developers to consolidate events with DEFINE_EVENT() so this should not be an issue. The kprobes define a unique class to every new event, but are dynamic so it should not be a issue. The syscalls however have a single class but the fields for the individual events are different. The syscalls use a metadata to define the fields. I moved the fields list from the event to the metadata and added a "get_fields()" function to the class. This function is used to find the fields. For normal events and kprobes, get_fields() just returns a pointer to the fields list_head in the class. For syscall events, it returns the fields list_head in the metadata for the event. v2: Fixed the syscall fields. The syscall metadata needs a list of fields for both enter and exit. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-22 21:35:55 +07:00
struct list_head *head;
tracing: Move fields from event to class structure Move the defined fields from the event to the class structure. Since the fields of the event are defined by the class they belong to, it makes sense to have the class hold the information instead of the individual events. The events of the same class would just hold duplicate information. After this change the size of the kernel dropped another 3K: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900252 1057412 861512 6819176 680d68 vmlinux.regs 4900375 1053380 861512 6815267 67fe23 vmlinux.fields Although the text increased, this was mainly due to the C files having to adapt to the change. This is a constant increase, where new tracepoints will not increase the Text. But the big drop is in the data size (as well as needed allocations to hold the fields). This will give even more savings as more tracepoints are created. Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS() with several DEFINE_EVENT()s, then the savings will be lost. But we are pushing developers to consolidate events with DEFINE_EVENT() so this should not be an issue. The kprobes define a unique class to every new event, but are dynamic so it should not be a issue. The syscalls however have a single class but the fields for the individual events are different. The syscalls use a metadata to define the fields. I moved the fields list from the event to the metadata and added a "get_fields()" function to the class. This function is used to find the fields. For normal events and kprobes, get_fields() just returns a pointer to the fields list_head in the class. For syscall events, it returns the fields list_head in the metadata for the event. v2: Fixed the syscall fields. The syscall metadata needs a list of fields for both enter and exit. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-22 21:35:55 +07:00
head = trace_get_fields(call);
list_for_each_entry_safe(field, next, head, link) {
list_del(&field->link);
tracing: Use kmem_cache_alloc instead of kmalloc in trace_events.c The event structures used by the trace events are mostly persistent, but they are also allocated by kmalloc, which is not the best at allocating space for what is used. By converting these kmallocs into kmem_cache_allocs, we can save over 50K of space that is permanently allocated. After boot we have: slab name active allocated size --------- ------ --------- ---- ftrace_event_file 979 1005 56 67 1 ftrace_event_field 2301 2310 48 77 1 The ftrace_event_file has at boot up 979 active objects out of 1005 allocated in the slabs. Each object is 56 bytes. In a normal kmalloc, that would allocate 64 bytes for each object. 1005 - 979 = 26 objects not used 26 * 56 = 1456 bytes wasted But if we used kmalloc: 64 - 56 = 8 bytes unused per allocation 8 * 979 = 7832 bytes wasted 7832 - 1456 = 6376 bytes in savings Doing the same for ftrace_event_field where there's 2301 objects allocated in a slab that can hold 2310 with 48 bytes each we have: 2310 - 2301 = 9 objects not used 9 * 48 = 432 bytes wasted A kmalloc would also use 64 bytes per object: 64 - 48 = 16 bytes unused per allocation 16 * 2301 = 36816 bytes wasted! 36816 - 432 = 36384 bytes in savings This change gives us a total of 42760 bytes in savings. At least on my machine, but as there's a lot of these persistent objects for all configurations that use trace points, this is a net win. Thanks to Ezequiel Garcia for his trace_analyze presentation which pointed out the wasted space in my code. Cc: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-28 08:23:57 +07:00
kmem_cache_free(field_cachep, field);
}
}
/*
* run-time version of trace_event_get_offsets_<call>() that returns the last
* accessible offset of trace fields excluding __dynamic_array bytes
*/
int trace_event_get_offsets(struct trace_event_call *call)
{
struct ftrace_event_field *tail;
struct list_head *head;
head = trace_get_fields(call);
/*
* head->next points to the last field with the largest offset,
* since it was added last by trace_define_field()
*/
tail = list_first_entry(head, struct ftrace_event_field, link);
return tail->offset + tail->size;
}
int trace_event_raw_init(struct trace_event_call *call)
{
int id;
id = register_trace_event(&call->event);
if (!id)
return -ENODEV;
return 0;
}
EXPORT_SYMBOL_GPL(trace_event_raw_init);
bool trace_event_ignore_this_pid(struct trace_event_file *trace_file)
{
struct trace_array *tr = trace_file->tr;
struct trace_array_cpu *data;
struct trace_pid_list *no_pid_list;
struct trace_pid_list *pid_list;
trace: Use rcu_dereference_raw for hooks from trace-event subsystem Since we switched to using SRCU for tracepoints used in the idle path, we can no longer use rcu_dereference_sched for dereferencing points in trace-event hooks. Since tracepoints can now use either SRCU or sched-RCU, just use rcu_dereference_raw for traceevents just like we're doing when dereferencing the tracepoint table. This prevents an RCU warning reported by Masami: [ 282.060593] WARNING: can't dereference registers at 00000000f3c7f62b [ 282.063200] ============================= [ 282.064082] WARNING: suspicious RCU usage [ 282.064963] 4.18.0-rc6+ #15 Tainted: G W [ 282.066048] ----------------------------- [ 282.066923] /home/mhiramat/ksrc/linux/kernel/trace/trace_events.c:242 suspicious rcu_dereference_check() usage! [ 282.068974] [ 282.068974] other info that might help us debug this: [ 282.068974] [ 282.070770] [ 282.070770] RCU used illegally from idle CPU! [ 282.070770] rcu_scheduler_active = 2, debug_locks = 1 [ 282.072938] RCU used illegally from extended quiescent state! [ 282.074183] no locks held by swapper/0/0. [ 282.075071] [ 282.075071] stack backtrace: [ 282.076121] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W [ 282.077782] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 282.079604] Call Trace: [ 282.080212] <IRQ> [ 282.080755] dump_stack+0x85/0xcb [ 282.081523] trace_event_ignore_this_pid+0x66/0x70 [ 282.082541] trace_event_raw_event_preemptirq_template+0xa2/0xb0 [ 282.083774] ? interrupt_entry+0xc4/0xe0 [ 282.084665] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 282.085669] trace_hardirqs_off_caller+0x90/0xd0 [ 282.086597] trace_hardirqs_off_thunk+0x1a/0x1c [ 282.087433] ? call_function_interrupt+0xa/0x20 [ 282.088201] interrupt_entry+0xc4/0xe0 [ 282.088848] ? call_function_interrupt+0xa/0x20 [ 282.089579] </IRQ> [ 282.090029] ? native_safe_halt+0x2/0x10 [ 282.090695] ? default_idle+0x1f/0x160 [ 282.091330] ? default_idle_call+0x24/0x40 [ 282.091997] ? do_idle+0x210/0x250 [ 282.092658] ? cpu_startup_entry+0x6f/0x80 [ 282.093338] ? start_kernel+0x49d/0x4bd [ 282.093987] ? secondary_startup_64+0xa5/0xb0 Link: http://lkml.kernel.org/r/20180803023407.225852-1-joel@joelfernandes.org Reported-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU") Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-03 09:34:07 +07:00
pid_list = rcu_dereference_raw(tr->filtered_pids);
no_pid_list = rcu_dereference_raw(tr->filtered_no_pids);
if (!pid_list && !no_pid_list)
return false;
data = this_cpu_ptr(tr->array_buffer.data);
return data->ignore_pid;
}
EXPORT_SYMBOL_GPL(trace_event_ignore_this_pid);
void *trace_event_buffer_reserve(struct trace_event_buffer *fbuffer,
struct trace_event_file *trace_file,
unsigned long len)
{
struct trace_event_call *event_call = trace_file->event_call;
if ((trace_file->flags & EVENT_FILE_FL_PID_FILTER) &&
trace_event_ignore_this_pid(trace_file))
return NULL;
local_save_flags(fbuffer->flags);
fbuffer->pc = preempt_count();
/*
* If CONFIG_PREEMPTION is enabled, then the tracepoint itself disables
* preemption (adding one to the preempt_count). Since we are
* interested in the preempt_count at the time the tracepoint was
* hit, we need to subtract one to offset the increment.
*/
if (IS_ENABLED(CONFIG_PREEMPTION))
fbuffer->pc--;
fbuffer->trace_file = trace_file;
fbuffer->event =
trace_event_buffer_lock_reserve(&fbuffer->buffer, trace_file,
event_call->event.type, len,
fbuffer->flags, fbuffer->pc);
if (!fbuffer->event)
return NULL;
fbuffer->regs = NULL;
fbuffer->entry = ring_buffer_event_data(fbuffer->event);
return fbuffer->entry;
}
EXPORT_SYMBOL_GPL(trace_event_buffer_reserve);
int trace_event_reg(struct trace_event_call *call,
enum trace_reg type, void *data)
{
struct trace_event_file *file = data;
WARN_ON(!(call->flags & TRACE_EVENT_FL_TRACEPOINT));
switch (type) {
case TRACE_REG_REGISTER:
return tracepoint_probe_register(call->tp,
call->class->probe,
file);
case TRACE_REG_UNREGISTER:
tracepoint_probe_unregister(call->tp,
call->class->probe,
file);
return 0;
#ifdef CONFIG_PERF_EVENTS
case TRACE_REG_PERF_REGISTER:
return tracepoint_probe_register(call->tp,
call->class->perf_probe,
call);
case TRACE_REG_PERF_UNREGISTER:
tracepoint_probe_unregister(call->tp,
call->class->perf_probe,
call);
return 0;
case TRACE_REG_PERF_OPEN:
case TRACE_REG_PERF_CLOSE:
case TRACE_REG_PERF_ADD:
case TRACE_REG_PERF_DEL:
return 0;
#endif
}
return 0;
}
EXPORT_SYMBOL_GPL(trace_event_reg);
void trace_event_enable_cmd_record(bool enable)
{
struct trace_event_file *file;
struct trace_array *tr;
lockdep_assert_held(&event_mutex);
do_for_each_event_file(tr, file) {
if (!(file->flags & EVENT_FILE_FL_ENABLED))
continue;
if (enable) {
tracing_start_cmdline_record();
set_bit(EVENT_FILE_FL_RECORDED_CMD_BIT, &file->flags);
} else {
tracing_stop_cmdline_record();
clear_bit(EVENT_FILE_FL_RECORDED_CMD_BIT, &file->flags);
}
} while_for_each_event_file();
}
void trace_event_enable_tgid_record(bool enable)
{
struct trace_event_file *file;
struct trace_array *tr;
lockdep_assert_held(&event_mutex);
do_for_each_event_file(tr, file) {
if (!(file->flags & EVENT_FILE_FL_ENABLED))
continue;
if (enable) {
tracing_start_tgid_record();
set_bit(EVENT_FILE_FL_RECORDED_TGID_BIT, &file->flags);
} else {
tracing_stop_tgid_record();
clear_bit(EVENT_FILE_FL_RECORDED_TGID_BIT,
&file->flags);
}
} while_for_each_event_file();
}
static int __ftrace_event_enable_disable(struct trace_event_file *file,
int enable, int soft_disable)
{
struct trace_event_call *call = file->event_call;
struct trace_array *tr = file->tr;
tracing: Use temp buffer when filtering events Filtering of events requires the data to be written to the ring buffer before it can be decided to filter or not. This is because the parameters of the filter are based on the result that is written to the ring buffer and not on the parameters that are passed into the trace functions. The ftrace ring buffer is optimized for writing into the ring buffer and committing. The discard procedure used when filtering decides the event should be discarded is much more heavy weight. Thus, using a temporary filter when filtering events can speed things up drastically. Without a temp buffer we have: # trace-cmd start -p nop # perf stat -r 10 hackbench 50 0.790706626 seconds time elapsed ( +- 0.71% ) # trace-cmd start -e all # perf stat -r 10 hackbench 50 1.566904059 seconds time elapsed ( +- 0.27% ) # trace-cmd start -e all -f 'common_preempt_count==20' # perf stat -r 10 hackbench 50 1.690598511 seconds time elapsed ( +- 0.19% ) # trace-cmd start -e all -f 'common_preempt_count!=20' # perf stat -r 10 hackbench 50 1.707486364 seconds time elapsed ( +- 0.30% ) The first run above is without any tracing, just to get a based figure. hackbench takes ~0.79 seconds to run on the system. The second run enables tracing all events where nothing is filtered. This increases the time by 100% and hackbench takes 1.57 seconds to run. The third run filters all events where the preempt count will equal "20" (this should never happen) thus all events are discarded. This takes 1.69 seconds to run. This is 10% slower than just committing the events! The last run enables all events and filters where the filter will commit all events, and this takes 1.70 seconds to run. The filtering overhead is approximately 10%. Thus, the discard and commit of an event from the ring buffer may be about the same time. With this patch, the numbers change: # trace-cmd start -p nop # perf stat -r 10 hackbench 50 0.778233033 seconds time elapsed ( +- 0.38% ) # trace-cmd start -e all # perf stat -r 10 hackbench 50 1.582102692 seconds time elapsed ( +- 0.28% ) # trace-cmd start -e all -f 'common_preempt_count==20' # perf stat -r 10 hackbench 50 1.309230710 seconds time elapsed ( +- 0.22% ) # trace-cmd start -e all -f 'common_preempt_count!=20' # perf stat -r 10 hackbench 50 1.786001924 seconds time elapsed ( +- 0.20% ) The first run is again the base with no tracing. The second run is all tracing with no filtering. It is a little slower, but that may be well within the noise. The third run shows that discarding all events only took 1.3 seconds. This is a speed up of 23%! The discard is much faster than even the commit. The one downside is shown in the last run. Events that are not discarded by the filter will take longer to add, this is due to the extra copy of the event. Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-04 04:15:43 +07:00
unsigned long file_flags = file->flags;
int ret = 0;
int disable;
switch (enable) {
case 0:
/*
* When soft_disable is set and enable is cleared, the sm_ref
* reference counter is decremented. If it reaches 0, we want
* to clear the SOFT_DISABLED flag but leave the event in the
* state that it was. That is, if the event was enabled and
* SOFT_DISABLED isn't set, then do nothing. But if SOFT_DISABLED
* is set we do not want the event to be enabled before we
* clear the bit.
*
* When soft_disable is not set but the SOFT_MODE flag is,
* we do nothing. Do not disable the tracepoint, otherwise
* "soft enable"s (clearing the SOFT_DISABLED bit) wont work.
*/
if (soft_disable) {
if (atomic_dec_return(&file->sm_ref) > 0)
break;
disable = file->flags & EVENT_FILE_FL_SOFT_DISABLED;
clear_bit(EVENT_FILE_FL_SOFT_MODE_BIT, &file->flags);
} else
disable = !(file->flags & EVENT_FILE_FL_SOFT_MODE);
if (disable && (file->flags & EVENT_FILE_FL_ENABLED)) {
clear_bit(EVENT_FILE_FL_ENABLED_BIT, &file->flags);
if (file->flags & EVENT_FILE_FL_RECORDED_CMD) {
tracing_stop_cmdline_record();
clear_bit(EVENT_FILE_FL_RECORDED_CMD_BIT, &file->flags);
}
if (file->flags & EVENT_FILE_FL_RECORDED_TGID) {
tracing_stop_tgid_record();
clear_bit(EVENT_FILE_FL_RECORDED_TGID_BIT, &file->flags);
}
call->class->reg(call, TRACE_REG_UNREGISTER, file);
}
/* If in SOFT_MODE, just set the SOFT_DISABLE_BIT, else clear it */
if (file->flags & EVENT_FILE_FL_SOFT_MODE)
set_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &file->flags);
else
clear_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &file->flags);
break;
case 1:
/*
* When soft_disable is set and enable is set, we want to
* register the tracepoint for the event, but leave the event
* as is. That means, if the event was already enabled, we do
* nothing (but set SOFT_MODE). If the event is disabled, we
* set SOFT_DISABLED before enabling the event tracepoint, so
* it still seems to be disabled.
*/
if (!soft_disable)
clear_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &file->flags);
else {
if (atomic_inc_return(&file->sm_ref) > 1)
break;
set_bit(EVENT_FILE_FL_SOFT_MODE_BIT, &file->flags);
}
if (!(file->flags & EVENT_FILE_FL_ENABLED)) {
bool cmd = false, tgid = false;
/* Keep the event disabled, when going to SOFT_MODE. */
if (soft_disable)
set_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &file->flags);
if (tr->trace_flags & TRACE_ITER_RECORD_CMD) {
cmd = true;
tracing_start_cmdline_record();
set_bit(EVENT_FILE_FL_RECORDED_CMD_BIT, &file->flags);
}
if (tr->trace_flags & TRACE_ITER_RECORD_TGID) {
tgid = true;
tracing_start_tgid_record();
set_bit(EVENT_FILE_FL_RECORDED_TGID_BIT, &file->flags);
}
ret = call->class->reg(call, TRACE_REG_REGISTER, file);
if (ret) {
if (cmd)
tracing_stop_cmdline_record();
if (tgid)
tracing_stop_tgid_record();
pr_info("event trace: Could not enable event "
"%s\n", trace_event_name(call));
break;
}
set_bit(EVENT_FILE_FL_ENABLED_BIT, &file->flags);
/* WAS_ENABLED gets set but never cleared. */
set_bit(EVENT_FILE_FL_WAS_ENABLED_BIT, &file->flags);
}
break;
}
tracing: Use temp buffer when filtering events Filtering of events requires the data to be written to the ring buffer before it can be decided to filter or not. This is because the parameters of the filter are based on the result that is written to the ring buffer and not on the parameters that are passed into the trace functions. The ftrace ring buffer is optimized for writing into the ring buffer and committing. The discard procedure used when filtering decides the event should be discarded is much more heavy weight. Thus, using a temporary filter when filtering events can speed things up drastically. Without a temp buffer we have: # trace-cmd start -p nop # perf stat -r 10 hackbench 50 0.790706626 seconds time elapsed ( +- 0.71% ) # trace-cmd start -e all # perf stat -r 10 hackbench 50 1.566904059 seconds time elapsed ( +- 0.27% ) # trace-cmd start -e all -f 'common_preempt_count==20' # perf stat -r 10 hackbench 50 1.690598511 seconds time elapsed ( +- 0.19% ) # trace-cmd start -e all -f 'common_preempt_count!=20' # perf stat -r 10 hackbench 50 1.707486364 seconds time elapsed ( +- 0.30% ) The first run above is without any tracing, just to get a based figure. hackbench takes ~0.79 seconds to run on the system. The second run enables tracing all events where nothing is filtered. This increases the time by 100% and hackbench takes 1.57 seconds to run. The third run filters all events where the preempt count will equal "20" (this should never happen) thus all events are discarded. This takes 1.69 seconds to run. This is 10% slower than just committing the events! The last run enables all events and filters where the filter will commit all events, and this takes 1.70 seconds to run. The filtering overhead is approximately 10%. Thus, the discard and commit of an event from the ring buffer may be about the same time. With this patch, the numbers change: # trace-cmd start -p nop # perf stat -r 10 hackbench 50 0.778233033 seconds time elapsed ( +- 0.38% ) # trace-cmd start -e all # perf stat -r 10 hackbench 50 1.582102692 seconds time elapsed ( +- 0.28% ) # trace-cmd start -e all -f 'common_preempt_count==20' # perf stat -r 10 hackbench 50 1.309230710 seconds time elapsed ( +- 0.22% ) # trace-cmd start -e all -f 'common_preempt_count!=20' # perf stat -r 10 hackbench 50 1.786001924 seconds time elapsed ( +- 0.20% ) The first run is again the base with no tracing. The second run is all tracing with no filtering. It is a little slower, but that may be well within the noise. The third run shows that discarding all events only took 1.3 seconds. This is a speed up of 23%! The discard is much faster than even the commit. The one downside is shown in the last run. Events that are not discarded by the filter will take longer to add, this is due to the extra copy of the event. Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-04 04:15:43 +07:00
/* Enable or disable use of trace_buffered_event */
if ((file_flags & EVENT_FILE_FL_SOFT_DISABLED) !=
(file->flags & EVENT_FILE_FL_SOFT_DISABLED)) {
if (file->flags & EVENT_FILE_FL_SOFT_DISABLED)
trace_buffered_event_enable();
else
trace_buffered_event_disable();
}
return ret;
}
int trace_event_enable_disable(struct trace_event_file *file,
tracing: Add basic event trigger framework Add a 'trigger' file for each trace event, enabling 'trace event triggers' to be set for trace events. 'trace event triggers' are patterned after the existing 'ftrace function triggers' implementation except that triggers are written to per-event 'trigger' files instead of to a single file such as the 'set_ftrace_filter' used for ftrace function triggers. The implementation is meant to be entirely separate from ftrace function triggers, in order to keep the respective implementations relatively simple and to allow them to diverge. The event trigger functionality is built on top of SOFT_DISABLE functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file flags which is checked when any trace event fires. Triggers set for a particular event need to be checked regardless of whether that event is actually enabled or not - getting an event to fire even if it's not enabled is what's already implemented by SOFT_DISABLE mode, so trigger mode directly reuses that. Event trigger essentially inherit the soft disable logic in __ftrace_event_enable_disable() while adding a bit of logic and trigger reference counting via tm_ref on top of that in a new trace_event_trigger_enable_disable() function. Because the base __ftrace_event_enable_disable() code now needs to be invoked from outside trace_events.c, a wrapper is also added for those usages. The triggers for an event are actually invoked via a new function, event_triggers_call(), and code is also added to invoke them for ftrace_raw_event calls as well as syscall events. The main part of the patch creates a new trace_events_trigger.c file to contain the trace event triggers implementation. The standard open, read, and release file operations are implemented here. The open() implementation sets up for the various open modes of the 'trigger' file. It creates and attaches the trigger iterator and sets up the command parser. If opened for reading set up the trigger seq_ops. The read() implementation parses the event trigger written to the 'trigger' file, looks up the trigger command, and passes it along to that event_command's func() implementation for command-specific processing. The release() implementation does whatever cleanup is needed to release the 'trigger' file, like releasing the parser and trigger iterator, etc. A couple of functions for event command registration and unregistration are added, along with a list to add them to and a mutex to protect them, as well as an (initially empty) registration function to add the set of commands that will be added by future commits, and call to it from the trace event initialization code. also added are a couple trigger-specific data structures needed for these implementations such as a trigger iterator and a struct for trigger-specific data. A couple structs consisting mostly of function meant to be implemented in command-specific ways, event_command and event_trigger_ops, are used by the generic event trigger command implementations. They're being put into trace.h alongside the other trace_event data structures and functions, in the expectation that they'll be needed in several trace_event-related files such as trace_events_trigger.c and trace_events.c. The event_command.func() function is meant to be called by the trigger parsing code in order to add a trigger instance to the corresponding event. It essentially coordinates adding a live trigger instance to the event, and arming the triggering the event. Every event_command func() implementation essentially does the same thing for any command: - choose ops - use the value of param to choose either a number or count version of event_trigger_ops specific to the command - do the register or unregister of those ops - associate a filter, if specified, with the triggering event The reg() and unreg() ops allow command-specific implementations for event_trigger_op registration and unregistration, and the get_trigger_ops() op allows command-specific event_trigger_ops selection to be parameterized. When a trigger instance is added, the reg() op essentially adds that trigger to the triggering event and arms it, while unreg() does the opposite. The set_filter() function is used to associate a filter with the trigger - if the command doesn't specify a set_filter() implementation, the command will ignore filters. Each command has an associated trigger_type, which serves double duty, both as a unique identifier for the command as well as a value that can be used for setting a trigger mode bit during trigger invocation. The signature of func() adds a pointer to the event_command struct, used to invoke those functions, along with a command_data param that can be passed to the reg/unreg functions. This allows func() implementations to use command-specific blobs and supports code re-use. The event_trigger_ops.func() command corrsponds to the trigger 'probe' function that gets called when the triggering event is actually invoked. The other functions are used to list the trigger when needed, along with a couple mundane book-keeping functions. This also moves event_file_data() into trace.h so it can be used outside of trace_events.c. Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Idea-by: Steve Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-24 20:59:24 +07:00
int enable, int soft_disable)
{
return __ftrace_event_enable_disable(file, enable, soft_disable);
}
static int ftrace_event_enable_disable(struct trace_event_file *file,
int enable)
{
return __ftrace_event_enable_disable(file, enable, 0);
}
static void ftrace_clear_events(struct trace_array *tr)
{
struct trace_event_file *file;
mutex_lock(&event_mutex);
list_for_each_entry(file, &tr->events, list) {
ftrace_event_enable_disable(file, 0);
}
mutex_unlock(&event_mutex);
}
static void
event_filter_pid_sched_process_exit(void *data, struct task_struct *task)
{
struct trace_pid_list *pid_list;
struct trace_array *tr = data;
trace: Use rcu_dereference_raw for hooks from trace-event subsystem Since we switched to using SRCU for tracepoints used in the idle path, we can no longer use rcu_dereference_sched for dereferencing points in trace-event hooks. Since tracepoints can now use either SRCU or sched-RCU, just use rcu_dereference_raw for traceevents just like we're doing when dereferencing the tracepoint table. This prevents an RCU warning reported by Masami: [ 282.060593] WARNING: can't dereference registers at 00000000f3c7f62b [ 282.063200] ============================= [ 282.064082] WARNING: suspicious RCU usage [ 282.064963] 4.18.0-rc6+ #15 Tainted: G W [ 282.066048] ----------------------------- [ 282.066923] /home/mhiramat/ksrc/linux/kernel/trace/trace_events.c:242 suspicious rcu_dereference_check() usage! [ 282.068974] [ 282.068974] other info that might help us debug this: [ 282.068974] [ 282.070770] [ 282.070770] RCU used illegally from idle CPU! [ 282.070770] rcu_scheduler_active = 2, debug_locks = 1 [ 282.072938] RCU used illegally from extended quiescent state! [ 282.074183] no locks held by swapper/0/0. [ 282.075071] [ 282.075071] stack backtrace: [ 282.076121] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W [ 282.077782] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 282.079604] Call Trace: [ 282.080212] <IRQ> [ 282.080755] dump_stack+0x85/0xcb [ 282.081523] trace_event_ignore_this_pid+0x66/0x70 [ 282.082541] trace_event_raw_event_preemptirq_template+0xa2/0xb0 [ 282.083774] ? interrupt_entry+0xc4/0xe0 [ 282.084665] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 282.085669] trace_hardirqs_off_caller+0x90/0xd0 [ 282.086597] trace_hardirqs_off_thunk+0x1a/0x1c [ 282.087433] ? call_function_interrupt+0xa/0x20 [ 282.088201] interrupt_entry+0xc4/0xe0 [ 282.088848] ? call_function_interrupt+0xa/0x20 [ 282.089579] </IRQ> [ 282.090029] ? native_safe_halt+0x2/0x10 [ 282.090695] ? default_idle+0x1f/0x160 [ 282.091330] ? default_idle_call+0x24/0x40 [ 282.091997] ? do_idle+0x210/0x250 [ 282.092658] ? cpu_startup_entry+0x6f/0x80 [ 282.093338] ? start_kernel+0x49d/0x4bd [ 282.093987] ? secondary_startup_64+0xa5/0xb0 Link: http://lkml.kernel.org/r/20180803023407.225852-1-joel@joelfernandes.org Reported-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU") Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-03 09:34:07 +07:00
pid_list = rcu_dereference_raw(tr->filtered_pids);
trace_filter_add_remove_task(pid_list, NULL, task);
pid_list = rcu_dereference_raw(tr->filtered_no_pids);
trace_filter_add_remove_task(pid_list, NULL, task);
}
static void
event_filter_pid_sched_process_fork(void *data,
struct task_struct *self,
struct task_struct *task)
{
struct trace_pid_list *pid_list;
struct trace_array *tr = data;
pid_list = rcu_dereference_sched(tr->filtered_pids);
trace_filter_add_remove_task(pid_list, self, task);
pid_list = rcu_dereference_sched(tr->filtered_no_pids);
trace_filter_add_remove_task(pid_list, self, task);
}
void trace_event_follow_fork(struct trace_array *tr, bool enable)
{
if (enable) {
register_trace_prio_sched_process_fork(event_filter_pid_sched_process_fork,
tr, INT_MIN);
register_trace_prio_sched_process_free(event_filter_pid_sched_process_exit,
tr, INT_MAX);
} else {
unregister_trace_sched_process_fork(event_filter_pid_sched_process_fork,
tr);
unregister_trace_sched_process_free(event_filter_pid_sched_process_exit,
tr);
}
}
static void
Most of the changes are clean ups and small fixes. Some of them have stable tags to them. I searched through my INBOX just as the merge window opened and found lots of patches to pull. I ran them through all my tests and they were in linux-next for a few days. Features added this release: ---------------------------- o Module globbing. You can now filter function tracing to several modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov) o Tracer specific options are now visible even when the tracer is not active. It was rather annoying that you can only see and modify tracer options after enabling the tracer. Now they are in the options/ directory even when the tracer is not active. Although they are still only visible when the tracer is active in the trace_options file. o Trace options are now per instance (although some of the tracer specific options are global) o New tracefs file: set_event_pid. If any pid is added to this file, then all events in the instance will filter out events that are not part of this pid. sched_switch and sched_wakeup events handle next and the wakee pids. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWPLQ5AAoJEKKk/i67LK/8CTYIAI1u8DE5QCzv3J0p54jVpNVR J5FqEU3eXIzd6FS4JXD4nxCeMpUZAy21YnhlZpsnrbJJM5bc9bUsBCwiKKM+MuSZ ztmy2sgYKkO0h/KUdhNgYJrzis3/Ojquyx9iAqK5ST/Fr+nKYx81akFKjNK53iur RJRut45sSa8rv11LaL8sgJ6hAWQTc+YkybUdZ5xaMdJmZ6A61T7Y6VzTjbUexuvL hntCfTjYLtVd8dbfknAnf3B7n/VOO3IFF85wr7ciYR5oEVfPrF8tHmJBlhHExPpX kaXAiDDRY/UTg/5DQqnp4zmxJoR5BQ2l4pT5PwiLcnwhcphIDNYS8EYUmOYAWjU= =TjOE -----END PGP SIGNATURE----- Merge tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracking updates from Steven Rostedt: "Most of the changes are clean ups and small fixes. Some of them have stable tags to them. I searched through my INBOX just as the merge window opened and found lots of patches to pull. I ran them through all my tests and they were in linux-next for a few days. Features added this release: ---------------------------- - Module globbing. You can now filter function tracing to several modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov) - Tracer specific options are now visible even when the tracer is not active. It was rather annoying that you can only see and modify tracer options after enabling the tracer. Now they are in the options/ directory even when the tracer is not active. Although they are still only visible when the tracer is active in the trace_options file. - Trace options are now per instance (although some of the tracer specific options are global) - New tracefs file: set_event_pid. If any pid is added to this file, then all events in the instance will filter out events that are not part of this pid. sched_switch and sched_wakeup events handle next and the wakee pids" * tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits) tracefs: Fix refcount imbalance in start_creating() tracing: Put back comma for empty fields in boot string parsing tracing: Apply tracer specific options from kernel command line. tracing: Add some documentation about set_event_pid ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark tracing: Allow dumping traces without tracking trace started cpus ring_buffer: Fix more races when terminating the producer in the benchmark ring_buffer: Do no not complete benchmark reader too early tracing: Remove redundant TP_ARGS redefining tracing: Rename max_stack_lock to stack_trace_max_lock tracing: Allow arch-specific stack tracer recordmcount: arm64: Replace the ignored mcount call into nop recordmcount: Fix endianness handling bug for nop_mcount tracepoints: Fix documentation of RCU lockdep checks tracing: ftrace_event_is_function() can return boolean tracing: is_legal_op() can return boolean ring-buffer: rb_event_is_commit() can return boolean ring-buffer: rb_per_cpu_empty() can return boolean ring_buffer: ring_buffer_empty{cpu}() can return boolean ring-buffer: rb_is_reader_page() can return boolean ...
2015-11-07 04:30:20 +07:00
event_filter_pid_sched_switch_probe_pre(void *data, bool preempt,
struct task_struct *prev, struct task_struct *next)
{
struct trace_array *tr = data;
struct trace_pid_list *no_pid_list;
struct trace_pid_list *pid_list;
bool ret;
pid_list = rcu_dereference_sched(tr->filtered_pids);
no_pid_list = rcu_dereference_sched(tr->filtered_no_pids);
/*
* Sched switch is funny, as we only want to ignore it
* in the notrace case if both prev and next should be ignored.
*/
ret = trace_ignore_this_task(NULL, no_pid_list, prev) &&
trace_ignore_this_task(NULL, no_pid_list, next);
this_cpu_write(tr->array_buffer.data->ignore_pid, ret ||
(trace_ignore_this_task(pid_list, NULL, prev) &&
trace_ignore_this_task(pid_list, NULL, next)));
}
static void
Most of the changes are clean ups and small fixes. Some of them have stable tags to them. I searched through my INBOX just as the merge window opened and found lots of patches to pull. I ran them through all my tests and they were in linux-next for a few days. Features added this release: ---------------------------- o Module globbing. You can now filter function tracing to several modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov) o Tracer specific options are now visible even when the tracer is not active. It was rather annoying that you can only see and modify tracer options after enabling the tracer. Now they are in the options/ directory even when the tracer is not active. Although they are still only visible when the tracer is active in the trace_options file. o Trace options are now per instance (although some of the tracer specific options are global) o New tracefs file: set_event_pid. If any pid is added to this file, then all events in the instance will filter out events that are not part of this pid. sched_switch and sched_wakeup events handle next and the wakee pids. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWPLQ5AAoJEKKk/i67LK/8CTYIAI1u8DE5QCzv3J0p54jVpNVR J5FqEU3eXIzd6FS4JXD4nxCeMpUZAy21YnhlZpsnrbJJM5bc9bUsBCwiKKM+MuSZ ztmy2sgYKkO0h/KUdhNgYJrzis3/Ojquyx9iAqK5ST/Fr+nKYx81akFKjNK53iur RJRut45sSa8rv11LaL8sgJ6hAWQTc+YkybUdZ5xaMdJmZ6A61T7Y6VzTjbUexuvL hntCfTjYLtVd8dbfknAnf3B7n/VOO3IFF85wr7ciYR5oEVfPrF8tHmJBlhHExPpX kaXAiDDRY/UTg/5DQqnp4zmxJoR5BQ2l4pT5PwiLcnwhcphIDNYS8EYUmOYAWjU= =TjOE -----END PGP SIGNATURE----- Merge tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracking updates from Steven Rostedt: "Most of the changes are clean ups and small fixes. Some of them have stable tags to them. I searched through my INBOX just as the merge window opened and found lots of patches to pull. I ran them through all my tests and they were in linux-next for a few days. Features added this release: ---------------------------- - Module globbing. You can now filter function tracing to several modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov) - Tracer specific options are now visible even when the tracer is not active. It was rather annoying that you can only see and modify tracer options after enabling the tracer. Now they are in the options/ directory even when the tracer is not active. Although they are still only visible when the tracer is active in the trace_options file. - Trace options are now per instance (although some of the tracer specific options are global) - New tracefs file: set_event_pid. If any pid is added to this file, then all events in the instance will filter out events that are not part of this pid. sched_switch and sched_wakeup events handle next and the wakee pids" * tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits) tracefs: Fix refcount imbalance in start_creating() tracing: Put back comma for empty fields in boot string parsing tracing: Apply tracer specific options from kernel command line. tracing: Add some documentation about set_event_pid ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark tracing: Allow dumping traces without tracking trace started cpus ring_buffer: Fix more races when terminating the producer in the benchmark ring_buffer: Do no not complete benchmark reader too early tracing: Remove redundant TP_ARGS redefining tracing: Rename max_stack_lock to stack_trace_max_lock tracing: Allow arch-specific stack tracer recordmcount: arm64: Replace the ignored mcount call into nop recordmcount: Fix endianness handling bug for nop_mcount tracepoints: Fix documentation of RCU lockdep checks tracing: ftrace_event_is_function() can return boolean tracing: is_legal_op() can return boolean ring-buffer: rb_event_is_commit() can return boolean ring-buffer: rb_per_cpu_empty() can return boolean ring_buffer: ring_buffer_empty{cpu}() can return boolean ring-buffer: rb_is_reader_page() can return boolean ...
2015-11-07 04:30:20 +07:00
event_filter_pid_sched_switch_probe_post(void *data, bool preempt,
struct task_struct *prev, struct task_struct *next)
{
struct trace_array *tr = data;
struct trace_pid_list *no_pid_list;
struct trace_pid_list *pid_list;
pid_list = rcu_dereference_sched(tr->filtered_pids);
no_pid_list = rcu_dereference_sched(tr->filtered_no_pids);
this_cpu_write(tr->array_buffer.data->ignore_pid,
trace_ignore_this_task(pid_list, no_pid_list, next));
}
static void
event_filter_pid_sched_wakeup_probe_pre(void *data, struct task_struct *task)
{
struct trace_array *tr = data;
struct trace_pid_list *no_pid_list;
struct trace_pid_list *pid_list;
/* Nothing to do if we are already tracing */
if (!this_cpu_read(tr->array_buffer.data->ignore_pid))
return;
pid_list = rcu_dereference_sched(tr->filtered_pids);
no_pid_list = rcu_dereference_sched(tr->filtered_no_pids);
this_cpu_write(tr->array_buffer.data->ignore_pid,
trace_ignore_this_task(pid_list, no_pid_list, task));
}
static void
event_filter_pid_sched_wakeup_probe_post(void *data, struct task_struct *task)
{
struct trace_array *tr = data;
struct trace_pid_list *no_pid_list;
struct trace_pid_list *pid_list;
/* Nothing to do if we are not tracing */
if (this_cpu_read(tr->array_buffer.data->ignore_pid))
return;
pid_list = rcu_dereference_sched(tr->filtered_pids);
no_pid_list = rcu_dereference_sched(tr->filtered_no_pids);
/* Set tracing if current is enabled */
this_cpu_write(tr->array_buffer.data->ignore_pid,
trace_ignore_this_task(pid_list, no_pid_list, current));
}
static void unregister_pid_events(struct trace_array *tr)
{
unregister_trace_sched_switch(event_filter_pid_sched_switch_probe_pre, tr);
unregister_trace_sched_switch(event_filter_pid_sched_switch_probe_post, tr);
unregister_trace_sched_wakeup(event_filter_pid_sched_wakeup_probe_pre, tr);
unregister_trace_sched_wakeup(event_filter_pid_sched_wakeup_probe_post, tr);
unregister_trace_sched_wakeup_new(event_filter_pid_sched_wakeup_probe_pre, tr);
unregister_trace_sched_wakeup_new(event_filter_pid_sched_wakeup_probe_post, tr);
unregister_trace_sched_waking(event_filter_pid_sched_wakeup_probe_pre, tr);
unregister_trace_sched_waking(event_filter_pid_sched_wakeup_probe_post, tr);
}
static void __ftrace_clear_event_pids(struct trace_array *tr, int type)
{
struct trace_pid_list *pid_list;
struct trace_pid_list *no_pid_list;
struct trace_event_file *file;
int cpu;
pid_list = rcu_dereference_protected(tr->filtered_pids,
lockdep_is_held(&event_mutex));
no_pid_list = rcu_dereference_protected(tr->filtered_no_pids,
lockdep_is_held(&event_mutex));
/* Make sure there's something to do */
if (!pid_type_enabled(type, pid_list, no_pid_list))
return;
if (!still_need_pid_events(type, pid_list, no_pid_list)) {
unregister_pid_events(tr);
list_for_each_entry(file, &tr->events, list) {
clear_bit(EVENT_FILE_FL_PID_FILTER_BIT, &file->flags);
}
for_each_possible_cpu(cpu)
per_cpu_ptr(tr->array_buffer.data, cpu)->ignore_pid = false;
}
if (type & TRACE_PIDS)
rcu_assign_pointer(tr->filtered_pids, NULL);
if (type & TRACE_NO_PIDS)
rcu_assign_pointer(tr->filtered_no_pids, NULL);
/* Wait till all users are no longer using pid filtering */
tracepoint_synchronize_unregister();
if ((type & TRACE_PIDS) && pid_list)
trace_free_pid_list(pid_list);
if ((type & TRACE_NO_PIDS) && no_pid_list)
trace_free_pid_list(no_pid_list);
}
static void ftrace_clear_event_pids(struct trace_array *tr, int type)
{
mutex_lock(&event_mutex);
__ftrace_clear_event_pids(tr, type);
mutex_unlock(&event_mutex);
}
static void __put_system(struct event_subsystem *system)
{
struct event_filter *filter = system->filter;
tracing: Failed to create system directory Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca073c37 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Cc: stable@vger.kernel.org # 3.10 Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-27 21:58:31 +07:00
WARN_ON_ONCE(system_refcount(system) == 0);
if (system_refcount_dec(system))
return;
list_del(&system->list);
if (filter) {
kfree(filter->filter_string);
kfree(filter);
}
kfree_const(system->name);
kfree(system);
}
static void __get_system(struct event_subsystem *system)
{
tracing: Failed to create system directory Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca073c37 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Cc: stable@vger.kernel.org # 3.10 Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-27 21:58:31 +07:00
WARN_ON_ONCE(system_refcount(system) == 0);
system_refcount_inc(system);
}
static void __get_system_dir(struct trace_subsystem_dir *dir)
{
WARN_ON_ONCE(dir->ref_count == 0);
dir->ref_count++;
__get_system(dir->subsystem);
}
static void __put_system_dir(struct trace_subsystem_dir *dir)
{
WARN_ON_ONCE(dir->ref_count == 0);
/* If the subsystem is about to be freed, the dir must be too */
tracing: Failed to create system directory Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca073c37 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Cc: stable@vger.kernel.org # 3.10 Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-27 21:58:31 +07:00
WARN_ON_ONCE(system_refcount(dir->subsystem) == 1 && dir->ref_count != 1);
__put_system(dir->subsystem);
if (!--dir->ref_count)
kfree(dir);
}
static void put_system(struct trace_subsystem_dir *dir)
{
mutex_lock(&event_mutex);
__put_system_dir(dir);
mutex_unlock(&event_mutex);
}
static void remove_subsystem(struct trace_subsystem_dir *dir)
{
if (!dir)
return;
if (!--dir->nr_events) {
tracefs_remove(dir->entry);
list_del(&dir->list);
__put_system_dir(dir);
}
}
static void remove_event_file_dir(struct trace_event_file *file)
{
struct dentry *dir = file->dir;
struct dentry *child;
if (dir) {
spin_lock(&dir->d_lock); /* probably unneeded */
list_for_each_entry(child, &dir->d_subdirs, d_child) {
if (d_really_is_positive(child)) /* probably unneeded */
d_inode(child)->i_private = NULL;
}
spin_unlock(&dir->d_lock);
tracefs_remove(dir);
}
list_del(&file->list);
remove_subsystem(file->system);
free_event_filter(file->filter);
kmem_cache_free(file_cachep, file);
}
/*
* __ftrace_set_clr_event(NULL, NULL, NULL, set) will set/unset all events.
*/
static int
__ftrace_set_clr_event_nolock(struct trace_array *tr, const char *match,
const char *sub, const char *event, int set)
{
struct trace_event_file *file;
struct trace_event_call *call;
const char *name;
int ret = -EINVAL;
int eret = 0;
list_for_each_entry(file, &tr->events, list) {
call = file->event_call;
name = trace_event_name(call);
if (!name || !call->class || !call->class->reg)
continue;
if (call->flags & TRACE_EVENT_FL_IGNORE_ENABLE)
continue;
if (match &&
strcmp(match, name) != 0 &&
strcmp(match, call->class->system) != 0)
continue;
if (sub && strcmp(sub, call->class->system) != 0)
continue;
if (event && strcmp(event, name) != 0)
continue;
ret = ftrace_event_enable_disable(file, set);
/*
* Save the first error and return that. Some events
* may still have been enabled, but let the user
* know that something went wrong.
*/
if (ret && !eret)
eret = ret;
ret = eret;
}
return ret;
}
static int __ftrace_set_clr_event(struct trace_array *tr, const char *match,
const char *sub, const char *event, int set)
{
int ret;
mutex_lock(&event_mutex);
ret = __ftrace_set_clr_event_nolock(tr, match, sub, event, set);
mutex_unlock(&event_mutex);
return ret;
}
int ftrace_set_clr_event(struct trace_array *tr, char *buf, int set)
{
char *event = NULL, *sub = NULL, *match;
int ret;
if (!tr)
return -ENOENT;
/*
* The buf format can be <subsystem>:<event-name>
* *:<event-name> means any event by that name.
* :<event-name> is the same.
*
* <subsystem>:* means all events in that subsystem
* <subsystem>: means the same.
*
* <name> (no ':') means all events in a subsystem with
* the name <name> or any event that matches <name>
*/
match = strsep(&buf, ":");
if (buf) {
sub = match;
event = buf;
match = NULL;
if (!strlen(sub) || strcmp(sub, "*") == 0)
sub = NULL;
if (!strlen(event) || strcmp(event, "*") == 0)
event = NULL;
}
ret = __ftrace_set_clr_event(tr, match, sub, event, set);
/* Put back the colon to allow this to be called again */
if (buf)
*(buf - 1) = ':';
return ret;
}
/**
* trace_set_clr_event - enable or disable an event
* @system: system name to match (NULL for any system)
* @event: event name to match (NULL for all events, within system)
* @set: 1 to enable, 0 to disable
*
* This is a way for other parts of the kernel to enable or disable
* event recording.
*
* Returns 0 on success, -EINVAL if the parameters do not match any
* registered events.
*/
int trace_set_clr_event(const char *system, const char *event, int set)
{
struct trace_array *tr = top_trace_array();
if (!tr)
return -ENODEV;
return __ftrace_set_clr_event(tr, NULL, system, event, set);
}
EXPORT_SYMBOL_GPL(trace_set_clr_event);
/**
* trace_array_set_clr_event - enable or disable an event for a trace array.
* @tr: concerned trace array.
* @system: system name to match (NULL for any system)
* @event: event name to match (NULL for all events, within system)
* @enable: true to enable, false to disable
*
* This is a way for other parts of the kernel to enable or disable
* event recording.
*
* Returns 0 on success, -EINVAL if the parameters do not match any
* registered events.
*/
int trace_array_set_clr_event(struct trace_array *tr, const char *system,
const char *event, bool enable)
{
int set;
if (!tr)
return -ENOENT;
set = (enable == true) ? 1 : 0;
return __ftrace_set_clr_event(tr, NULL, system, event, set);
}
EXPORT_SYMBOL_GPL(trace_array_set_clr_event);
/* 128 should be much more than enough */
#define EVENT_BUF_SIZE 127
static ssize_t
ftrace_event_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos)
{
struct trace_parser parser;
struct seq_file *m = file->private_data;
struct trace_array *tr = m->private;
ssize_t read, ret;
if (!cnt)
return 0;
ret = tracing_update_buffers();
if (ret < 0)
return ret;
if (trace_parser_get_init(&parser, EVENT_BUF_SIZE + 1))
return -ENOMEM;
read = trace_get_user(&parser, ubuf, cnt, ppos);
if (read >= 0 && trace_parser_loaded((&parser))) {
int set = 1;
if (*parser.buffer == '!')
set = 0;
ret = ftrace_set_clr_event(tr, parser.buffer + !set, set);
if (ret)
goto out_put;
}
ret = read;
out_put:
trace_parser_put(&parser);
return ret;
}
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
{
struct trace_event_file *file = v;
struct trace_event_call *call;
struct trace_array *tr = m->private;
(*pos)++;
list_for_each_entry_continue(file, &tr->events, list) {
call = file->event_call;
/*
* The ftrace subsystem is for showing formats only.
* They can not be enabled or disabled via the event files.
*/
if (call->class && call->class->reg &&
!(call->flags & TRACE_EVENT_FL_IGNORE_ENABLE))
return file;
}
return NULL;
}
static void *t_start(struct seq_file *m, loff_t *pos)
{
struct trace_event_file *file;
struct trace_array *tr = m->private;
loff_t l;
mutex_lock(&event_mutex);
file = list_entry(&tr->events, struct trace_event_file, list);
for (l = 0; l <= *pos; ) {
file = t_next(m, file, &l);
if (!file)
break;
}
return file;
}
static void *
s_next(struct seq_file *m, void *v, loff_t *pos)
{
struct trace_event_file *file = v;
struct trace_array *tr = m->private;
(*pos)++;
list_for_each_entry_continue(file, &tr->events, list) {
if (file->flags & EVENT_FILE_FL_ENABLED)
return file;
}
return NULL;
}
static void *s_start(struct seq_file *m, loff_t *pos)
{
struct trace_event_file *file;
struct trace_array *tr = m->private;
loff_t l;
mutex_lock(&event_mutex);
file = list_entry(&tr->events, struct trace_event_file, list);
for (l = 0; l <= *pos; ) {
file = s_next(m, file, &l);
if (!file)
break;
}
return file;
}
static int t_show(struct seq_file *m, void *v)
{
struct trace_event_file *file = v;
struct trace_event_call *call = file->event_call;
if (strcmp(call->class->system, TRACE_SYSTEM) != 0)
seq_printf(m, "%s:", call->class->system);
seq_printf(m, "%s\n", trace_event_name(call));
return 0;
}
static void t_stop(struct seq_file *m, void *p)
{
mutex_unlock(&event_mutex);
}
static void *
__next(struct seq_file *m, void *v, loff_t *pos, int type)
{
struct trace_array *tr = m->private;
struct trace_pid_list *pid_list;
if (type == TRACE_PIDS)
pid_list = rcu_dereference_sched(tr->filtered_pids);
else
pid_list = rcu_dereference_sched(tr->filtered_no_pids);
return trace_pid_next(pid_list, v, pos);
}
static void *
p_next(struct seq_file *m, void *v, loff_t *pos)
{
return __next(m, v, pos, TRACE_PIDS);
}
static void *
np_next(struct seq_file *m, void *v, loff_t *pos)
{
return __next(m, v, pos, TRACE_NO_PIDS);
}
static void *__start(struct seq_file *m, loff_t *pos, int type)
__acquires(RCU)
{
struct trace_pid_list *pid_list;
struct trace_array *tr = m->private;
/*
* Grab the mutex, to keep calls to p_next() having the same
* tr->filtered_pids as p_start() has.
* If we just passed the tr->filtered_pids around, then RCU would
* have been enough, but doing that makes things more complex.
*/
mutex_lock(&event_mutex);
rcu_read_lock_sched();
if (type == TRACE_PIDS)
pid_list = rcu_dereference_sched(tr->filtered_pids);
else
pid_list = rcu_dereference_sched(tr->filtered_no_pids);
if (!pid_list)
return NULL;
return trace_pid_start(pid_list, pos);
}
static void *p_start(struct seq_file *m, loff_t *pos)
__acquires(RCU)
{
return __start(m, pos, TRACE_PIDS);
}
static void *np_start(struct seq_file *m, loff_t *pos)
__acquires(RCU)
{
return __start(m, pos, TRACE_NO_PIDS);
}
static void p_stop(struct seq_file *m, void *p)
__releases(RCU)
{
rcu_read_unlock_sched();
mutex_unlock(&event_mutex);
}
static ssize_t
event_enable_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct trace_event_file *file;
unsigned long flags;
char buf[4] = "0";
mutex_lock(&event_mutex);
file = event_file_data(filp);
if (likely(file))
flags = file->flags;
mutex_unlock(&event_mutex);
if (!file)
return -ENODEV;
if (flags & EVENT_FILE_FL_ENABLED &&
!(flags & EVENT_FILE_FL_SOFT_DISABLED))
strcpy(buf, "1");
if (flags & EVENT_FILE_FL_SOFT_DISABLED ||
flags & EVENT_FILE_FL_SOFT_MODE)
strcat(buf, "*");
strcat(buf, "\n");
return simple_read_from_buffer(ubuf, cnt, ppos, buf, strlen(buf));
}
static ssize_t
event_enable_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct trace_event_file *file;
unsigned long val;
int ret;
ret = kstrtoul_from_user(ubuf, cnt, 10, &val);
if (ret)
return ret;
ret = tracing_update_buffers();
if (ret < 0)
return ret;
switch (val) {
case 0:
case 1:
ret = -ENODEV;
mutex_lock(&event_mutex);
file = event_file_data(filp);
if (likely(file))
ret = ftrace_event_enable_disable(file, val);
mutex_unlock(&event_mutex);
break;
default:
return -EINVAL;
}
*ppos += cnt;
return ret ? ret : cnt;
}
static ssize_t
system_enable_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
const char set_to_char[4] = { '?', '0', '1', 'X' };
struct trace_subsystem_dir *dir = filp->private_data;
struct event_subsystem *system = dir->subsystem;
struct trace_event_call *call;
struct trace_event_file *file;
struct trace_array *tr = dir->tr;
char buf[2];
int set = 0;
int ret;
mutex_lock(&event_mutex);
list_for_each_entry(file, &tr->events, list) {
call = file->event_call;
if (!trace_event_name(call) || !call->class || !call->class->reg)
continue;
if (system && strcmp(call->class->system, system->name) != 0)
continue;
/*
* We need to find out if all the events are set
* or if all events or cleared, or if we have
* a mixture.
*/
set |= (1 << !!(file->flags & EVENT_FILE_FL_ENABLED));
/*
* If we have a mixture, no need to look further.
*/
if (set == 3)
break;
}
mutex_unlock(&event_mutex);
buf[0] = set_to_char[set];
buf[1] = '\n';
ret = simple_read_from_buffer(ubuf, cnt, ppos, buf, 2);
return ret;
}
static ssize_t
system_enable_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct trace_subsystem_dir *dir = filp->private_data;
struct event_subsystem *system = dir->subsystem;
const char *name = NULL;
unsigned long val;
ssize_t ret;
ret = kstrtoul_from_user(ubuf, cnt, 10, &val);
if (ret)
return ret;
ret = tracing_update_buffers();
if (ret < 0)
return ret;
if (val != 0 && val != 1)
return -EINVAL;
/*
* Opening of "enable" adds a ref count to system,
* so the name is safe to use.
*/
if (system)
name = system->name;
ret = __ftrace_set_clr_event(dir->tr, NULL, name, NULL, val);
if (ret)
goto out;
ret = cnt;
out:
*ppos += cnt;
return ret;
}
enum {
FORMAT_HEADER = 1,
FORMAT_FIELD_SEPERATOR = 2,
FORMAT_PRINTFMT = 3,
};
static void *f_next(struct seq_file *m, void *v, loff_t *pos)
{
struct trace_event_call *call = event_file_data(m->private);
struct list_head *common_head = &ftrace_common_fields;
struct list_head *head = trace_get_fields(call);
struct list_head *node = v;
(*pos)++;
switch ((unsigned long)v) {
case FORMAT_HEADER:
node = common_head;
break;
case FORMAT_FIELD_SEPERATOR:
node = head;
break;
case FORMAT_PRINTFMT:
/* all done */
return NULL;
}
node = node->prev;
if (node == common_head)
return (void *)FORMAT_FIELD_SEPERATOR;
else if (node == head)
return (void *)FORMAT_PRINTFMT;
else
return node;
}
static int f_show(struct seq_file *m, void *v)
{
struct trace_event_call *call = event_file_data(m->private);
struct ftrace_event_field *field;
const char *array_descriptor;
switch ((unsigned long)v) {
case FORMAT_HEADER:
seq_printf(m, "name: %s\n", trace_event_name(call));
seq_printf(m, "ID: %d\n", call->event.type);
seq_puts(m, "format:\n");
return 0;
case FORMAT_FIELD_SEPERATOR:
seq_putc(m, '\n');
return 0;
case FORMAT_PRINTFMT:
seq_printf(m, "\nprint fmt: %s\n",
call->print_fmt);
return 0;
}
field = list_entry(v, struct ftrace_event_field, link);
/*
* Smartly shows the array type(except dynamic array).
* Normal:
* field:TYPE VAR
* If TYPE := TYPE[LEN], it is shown:
* field:TYPE VAR[LEN]
*/
array_descriptor = strchr(field->type, '[');
if (str_has_prefix(field->type, "__data_loc"))
array_descriptor = NULL;
if (!array_descriptor)
seq_printf(m, "\tfield:%s %s;\toffset:%u;\tsize:%u;\tsigned:%d;\n",
field->type, field->name, field->offset,
field->size, !!field->is_signed);
else
seq_printf(m, "\tfield:%.*s %s%s;\toffset:%u;\tsize:%u;\tsigned:%d;\n",
(int)(array_descriptor - field->type),
field->type, field->name,
array_descriptor, field->offset,
field->size, !!field->is_signed);
return 0;
}
static void *f_start(struct seq_file *m, loff_t *pos)
{
void *p = (void *)FORMAT_HEADER;
loff_t l = 0;
/* ->stop() is called even if ->start() fails */
mutex_lock(&event_mutex);
if (!event_file_data(m->private))
return ERR_PTR(-ENODEV);
while (l < *pos && p)
p = f_next(m, p, &l);
return p;
}
static void f_stop(struct seq_file *m, void *p)
{
mutex_unlock(&event_mutex);
}
static const struct seq_operations trace_format_seq_ops = {
.start = f_start,
.next = f_next,
.stop = f_stop,
.show = f_show,
};
static int trace_format_open(struct inode *inode, struct file *file)
{
struct seq_file *m;
int ret;
/* Do we want to hide event format files on tracefs lockdown? */
ret = seq_open(file, &trace_format_seq_ops);
if (ret < 0)
return ret;
m = file->private_data;
m->private = file;
return 0;
}
static ssize_t
event_id_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
{
int id = (long)event_file_data(filp);
char buf[32];
int len;
if (unlikely(!id))
return -ENODEV;
len = sprintf(buf, "%d\n", id);
return simple_read_from_buffer(ubuf, cnt, ppos, buf, len);
}
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
static ssize_t
event_filter_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct trace_event_file *file;
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
struct trace_seq *s;
int r = -ENODEV;
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
if (*ppos)
return 0;
s = kmalloc(sizeof(*s), GFP_KERNEL);
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
if (!s)
return -ENOMEM;
trace_seq_init(s);
mutex_lock(&event_mutex);
tracing: Update event filters for multibuffer The trace event filters are still tied to event calls rather than event files, which means you don't get what you'd expect when using filters in the multibuffer case: Before: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 2048 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 Setting the filter in tracing/instances/test1/events shouldn't affect the same event in tracing/events as it does above. After: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 We'd like to just move the filter directly from ftrace_event_call to ftrace_event_file, but there are a couple cases that don't yet have multibuffer support and therefore have to continue using the current event_call-based filters. For those cases, a new USE_CALL_FILTER bit is added to the event_call flags, whose main purpose is to keep the old behavior for those cases until they can be updated with multibuffer support; at that point, the USE_CALL_FILTER flag (and the new associated call_filter_check_discard() function) can go away. The multibuffer support also made filter_current_check_discard() redundant, so this change removes that function as well and replaces it with filter_check_discard() (or call_filter_check_discard() as appropriate). Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-24 20:34:17 +07:00
file = event_file_data(filp);
if (file)
print_event_filter(file, s);
mutex_unlock(&event_mutex);
tracing: Update event filters for multibuffer The trace event filters are still tied to event calls rather than event files, which means you don't get what you'd expect when using filters in the multibuffer case: Before: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 2048 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 Setting the filter in tracing/instances/test1/events shouldn't affect the same event in tracing/events as it does above. After: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 We'd like to just move the filter directly from ftrace_event_call to ftrace_event_file, but there are a couple cases that don't yet have multibuffer support and therefore have to continue using the current event_call-based filters. For those cases, a new USE_CALL_FILTER bit is added to the event_call flags, whose main purpose is to keep the old behavior for those cases until they can be updated with multibuffer support; at that point, the USE_CALL_FILTER flag (and the new associated call_filter_check_discard() function) can go away. The multibuffer support also made filter_current_check_discard() redundant, so this change removes that function as well and replaces it with filter_check_discard() (or call_filter_check_discard() as appropriate). Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-24 20:34:17 +07:00
if (file)
r = simple_read_from_buffer(ubuf, cnt, ppos,
s->buffer, trace_seq_used(s));
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
kfree(s);
return r;
}
static ssize_t
event_filter_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct trace_event_file *file;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
char *buf;
int err = -ENODEV;
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
if (cnt >= PAGE_SIZE)
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
return -EINVAL;
buf = memdup_user_nul(ubuf, cnt);
if (IS_ERR(buf))
return PTR_ERR(buf);
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
mutex_lock(&event_mutex);
tracing: Update event filters for multibuffer The trace event filters are still tied to event calls rather than event files, which means you don't get what you'd expect when using filters in the multibuffer case: Before: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 2048 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 Setting the filter in tracing/instances/test1/events shouldn't affect the same event in tracing/events as it does above. After: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 We'd like to just move the filter directly from ftrace_event_call to ftrace_event_file, but there are a couple cases that don't yet have multibuffer support and therefore have to continue using the current event_call-based filters. For those cases, a new USE_CALL_FILTER bit is added to the event_call flags, whose main purpose is to keep the old behavior for those cases until they can be updated with multibuffer support; at that point, the USE_CALL_FILTER flag (and the new associated call_filter_check_discard() function) can go away. The multibuffer support also made filter_current_check_discard() redundant, so this change removes that function as well and replaces it with filter_check_discard() (or call_filter_check_discard() as appropriate). Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-24 20:34:17 +07:00
file = event_file_data(filp);
if (file)
err = apply_event_filter(file, buf);
mutex_unlock(&event_mutex);
kfree(buf);
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
if (err < 0)
return err;
tracing/filters: allow on-the-fly filter switching This patch allows event filters to be safely removed or switched on-the-fly while avoiding the use of rcu or the suspension of tracing of previous versions. It does it by adding a new filter_pred_none() predicate function which does nothing and by never deallocating either the predicates or any of the filter_pred members used in matching; the predicate lists are allocated and initialized during ftrace_event_calls initialization. Whenever a filter is removed or replaced, the filter_pred_* functions currently in use by the affected ftrace_event_call are immediately switched over to to the filter_pred_none() function, while the rest of the filter_pred members are left intact, allowing any currently executing filter_pred_* functions to finish up, using the values they're currently using. In the case of filter replacement, the new predicate values are copied into the old predicates after the above step, and the filter_pred_none() functions are replaced by the filter_pred_* functions for the new filter. In this case, it is possible though very unlikely that a previous filter_pred_* is still running even after the filter_pred_none() switch and the switch to the new filter_pred_*. In that case, however, because nothing has been deallocated in the filter_pred, the worst that can happen is that the old filter_pred_* function sees the new values and as a result produces either a false positive or a false negative, depending on the values it finds. So one downside to this method is that rarely, it can produce a bad match during the filter switch, but it should be possible to live with that, IMHO. The other downside is that at least in this patch the predicate lists are always pre-allocated, taking up memory from the start. They could probably be allocated on first-use, and de-allocated when tracing is completely stopped - if this patch makes sense, I could create another one to do that later on. Oh, and it also places a restriction on the size of __arrays in events, currently set to 128, since they can't be larger than the now embedded str_val arrays in the filter_pred struct. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: paulmck@linux.vnet.ibm.com LKML-Reference: <1239610670.6660.49.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-13 15:17:50 +07:00
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
*ppos += cnt;
return cnt;
}
static LIST_HEAD(event_subsystems);
static int subsystem_open(struct inode *inode, struct file *filp)
{
struct event_subsystem *system = NULL;
struct trace_subsystem_dir *dir = NULL; /* Initialize for gcc */
struct trace_array *tr;
int ret;
if (tracing_is_disabled())
return -ENODEV;
/* Make sure the system still exists */
mutex_lock(&event_mutex);
mutex_lock(&trace_types_lock);
list_for_each_entry(tr, &ftrace_trace_arrays, list) {
list_for_each_entry(dir, &tr->systems, list) {
if (dir == inode->i_private) {
/* Don't open systems with no events */
if (dir->nr_events) {
__get_system_dir(dir);
system = dir->subsystem;
}
goto exit_loop;
}
}
}
exit_loop:
mutex_unlock(&trace_types_lock);
mutex_unlock(&event_mutex);
if (!system)
return -ENODEV;
/* Some versions of gcc think dir can be uninitialized here */
WARN_ON(!dir);
/* Still need to increment the ref count of the system */
if (trace_array_get(tr) < 0) {
put_system(dir);
return -ENODEV;
}
ret = tracing_open_generic(inode, filp);
if (ret < 0) {
trace_array_put(tr);
put_system(dir);
}
return ret;
}
static int system_tr_open(struct inode *inode, struct file *filp)
{
struct trace_subsystem_dir *dir;
struct trace_array *tr = inode->i_private;
int ret;
/* Make a temporary dir that has no system but points to tr */
dir = kzalloc(sizeof(*dir), GFP_KERNEL);
if (!dir)
return -ENOMEM;
ret = tracing_open_generic_tr(inode, filp);
if (ret < 0) {
kfree(dir);
return ret;
}
dir->tr = tr;
filp->private_data = dir;
return 0;
}
static int subsystem_release(struct inode *inode, struct file *file)
{
struct trace_subsystem_dir *dir = file->private_data;
trace_array_put(dir->tr);
/*
* If dir->subsystem is NULL, then this is a temporary
* descriptor that was made for a trace_array to enable
* all subsystems.
*/
if (dir->subsystem)
put_system(dir);
else
kfree(dir);
return 0;
}
static ssize_t
subsystem_filter_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct trace_subsystem_dir *dir = filp->private_data;
struct event_subsystem *system = dir->subsystem;
struct trace_seq *s;
int r;
if (*ppos)
return 0;
s = kmalloc(sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
trace_seq_init(s);
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
print_subsystem_event_filter(system, s);
r = simple_read_from_buffer(ubuf, cnt, ppos,
s->buffer, trace_seq_used(s));
kfree(s);
return r;
}
static ssize_t
subsystem_filter_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct trace_subsystem_dir *dir = filp->private_data;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
char *buf;
int err;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
if (cnt >= PAGE_SIZE)
return -EINVAL;
buf = memdup_user_nul(ubuf, cnt);
if (IS_ERR(buf))
return PTR_ERR(buf);
err = apply_subsystem_event_filter(dir, buf);
kfree(buf);
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
if (err < 0)
return err;
*ppos += cnt;
return cnt;
}
static ssize_t
show_header(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
{
int (*func)(struct trace_seq *s) = filp->private_data;
struct trace_seq *s;
int r;
if (*ppos)
return 0;
s = kmalloc(sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
trace_seq_init(s);
func(s);
r = simple_read_from_buffer(ubuf, cnt, ppos,
s->buffer, trace_seq_used(s));
kfree(s);
return r;
}
static void ignore_task_cpu(void *data)
{
struct trace_array *tr = data;
struct trace_pid_list *pid_list;
struct trace_pid_list *no_pid_list;
/*
* This function is called by on_each_cpu() while the
* event_mutex is held.
*/
pid_list = rcu_dereference_protected(tr->filtered_pids,
mutex_is_locked(&event_mutex));
no_pid_list = rcu_dereference_protected(tr->filtered_no_pids,
mutex_is_locked(&event_mutex));
this_cpu_write(tr->array_buffer.data->ignore_pid,
trace_ignore_this_task(pid_list, no_pid_list, current));
}
static void register_pid_events(struct trace_array *tr)
{
/*
* Register a probe that is called before all other probes
* to set ignore_pid if next or prev do not match.
* Register a probe this is called after all other probes
* to only keep ignore_pid set if next pid matches.
*/
register_trace_prio_sched_switch(event_filter_pid_sched_switch_probe_pre,
tr, INT_MAX);
register_trace_prio_sched_switch(event_filter_pid_sched_switch_probe_post,
tr, 0);
register_trace_prio_sched_wakeup(event_filter_pid_sched_wakeup_probe_pre,
tr, INT_MAX);
register_trace_prio_sched_wakeup(event_filter_pid_sched_wakeup_probe_post,
tr, 0);
register_trace_prio_sched_wakeup_new(event_filter_pid_sched_wakeup_probe_pre,
tr, INT_MAX);
register_trace_prio_sched_wakeup_new(event_filter_pid_sched_wakeup_probe_post,
tr, 0);
register_trace_prio_sched_waking(event_filter_pid_sched_wakeup_probe_pre,
tr, INT_MAX);
register_trace_prio_sched_waking(event_filter_pid_sched_wakeup_probe_post,
tr, 0);
}
static ssize_t
event_pid_write(struct file *filp, const char __user *ubuf,
size_t cnt, loff_t *ppos, int type)
{
struct seq_file *m = filp->private_data;
struct trace_array *tr = m->private;
struct trace_pid_list *filtered_pids = NULL;
struct trace_pid_list *other_pids = NULL;
struct trace_pid_list *pid_list;
struct trace_event_file *file;
ssize_t ret;
if (!cnt)
return 0;
ret = tracing_update_buffers();
if (ret < 0)
return ret;
mutex_lock(&event_mutex);
if (type == TRACE_PIDS) {
filtered_pids = rcu_dereference_protected(tr->filtered_pids,
lockdep_is_held(&event_mutex));
other_pids = rcu_dereference_protected(tr->filtered_no_pids,
lockdep_is_held(&event_mutex));
} else {
filtered_pids = rcu_dereference_protected(tr->filtered_no_pids,
lockdep_is_held(&event_mutex));
other_pids = rcu_dereference_protected(tr->filtered_pids,
lockdep_is_held(&event_mutex));
}
ret = trace_pid_write(filtered_pids, &pid_list, ubuf, cnt);
if (ret < 0)
goto out;
if (type == TRACE_PIDS)
rcu_assign_pointer(tr->filtered_pids, pid_list);
else
rcu_assign_pointer(tr->filtered_no_pids, pid_list);
list_for_each_entry(file, &tr->events, list) {
set_bit(EVENT_FILE_FL_PID_FILTER_BIT, &file->flags);
}
if (filtered_pids) {
tracepoint_synchronize_unregister();
trace_free_pid_list(filtered_pids);
} else if (pid_list && !other_pids) {
register_pid_events(tr);
}
/*
* Ignoring of pids is done at task switch. But we have to
* check for those tasks that are currently running.
* Always do this in case a pid was appended or removed.
*/
on_each_cpu(ignore_task_cpu, tr, 1);
out:
mutex_unlock(&event_mutex);
if (ret > 0)
*ppos += ret;
return ret;
}
static ssize_t
ftrace_event_pid_write(struct file *filp, const char __user *ubuf,
size_t cnt, loff_t *ppos)
{
return event_pid_write(filp, ubuf, cnt, ppos, TRACE_PIDS);
}
static ssize_t
ftrace_event_npid_write(struct file *filp, const char __user *ubuf,
size_t cnt, loff_t *ppos)
{
return event_pid_write(filp, ubuf, cnt, ppos, TRACE_NO_PIDS);
}
static int ftrace_event_avail_open(struct inode *inode, struct file *file);
static int ftrace_event_set_open(struct inode *inode, struct file *file);
static int ftrace_event_set_pid_open(struct inode *inode, struct file *file);
static int ftrace_event_set_npid_open(struct inode *inode, struct file *file);
static int ftrace_event_release(struct inode *inode, struct file *file);
static const struct seq_operations show_event_seq_ops = {
.start = t_start,
.next = t_next,
.show = t_show,
.stop = t_stop,
};
static const struct seq_operations show_set_event_seq_ops = {
.start = s_start,
.next = s_next,
.show = t_show,
.stop = t_stop,
};
static const struct seq_operations show_set_pid_seq_ops = {
.start = p_start,
.next = p_next,
.show = trace_pid_show,
.stop = p_stop,
};
static const struct seq_operations show_set_no_pid_seq_ops = {
.start = np_start,
.next = np_next,
.show = trace_pid_show,
.stop = p_stop,
};
static const struct file_operations ftrace_avail_fops = {
.open = ftrace_event_avail_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
static const struct file_operations ftrace_set_event_fops = {
.open = ftrace_event_set_open,
.read = seq_read,
.write = ftrace_event_write,
.llseek = seq_lseek,
.release = ftrace_event_release,
};
static const struct file_operations ftrace_set_event_pid_fops = {
.open = ftrace_event_set_pid_open,
.read = seq_read,
.write = ftrace_event_pid_write,
.llseek = seq_lseek,
.release = ftrace_event_release,
};
static const struct file_operations ftrace_set_event_notrace_pid_fops = {
.open = ftrace_event_set_npid_open,
.read = seq_read,
.write = ftrace_event_npid_write,
.llseek = seq_lseek,
.release = ftrace_event_release,
};
static const struct file_operations ftrace_enable_fops = {
.open = tracing_open_generic,
.read = event_enable_read,
.write = event_enable_write,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 23:52:59 +07:00
.llseek = default_llseek,
};
static const struct file_operations ftrace_event_format_fops = {
.open = trace_format_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
static const struct file_operations ftrace_event_id_fops = {
.read = event_id_read,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 23:52:59 +07:00
.llseek = default_llseek,
};
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
static const struct file_operations ftrace_event_filter_fops = {
.open = tracing_open_generic,
.read = event_filter_read,
.write = event_filter_write,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 23:52:59 +07:00
.llseek = default_llseek,
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 15:31:04 +07:00
};
static const struct file_operations ftrace_subsystem_filter_fops = {
.open = subsystem_open,
.read = subsystem_filter_read,
.write = subsystem_filter_write,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 23:52:59 +07:00
.llseek = default_llseek,
.release = subsystem_release,
};
static const struct file_operations ftrace_system_enable_fops = {
.open = subsystem_open,
.read = system_enable_read,
.write = system_enable_write,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 23:52:59 +07:00
.llseek = default_llseek,
.release = subsystem_release,
};
static const struct file_operations ftrace_tr_enable_fops = {
.open = system_tr_open,
.read = system_enable_read,
.write = system_enable_write,
.llseek = default_llseek,
.release = subsystem_release,
};
static const struct file_operations ftrace_show_header_fops = {
.open = tracing_open_generic,
.read = show_header,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 23:52:59 +07:00
.llseek = default_llseek,
};
static int
ftrace_event_open(struct inode *inode, struct file *file,
const struct seq_operations *seq_ops)
{
struct seq_file *m;
int ret;
ret = security_locked_down(LOCKDOWN_TRACEFS);
if (ret)
return ret;
ret = seq_open(file, seq_ops);
if (ret < 0)
return ret;
m = file->private_data;
/* copy tr over to seq ops */
m->private = inode->i_private;
return ret;
}
static int ftrace_event_release(struct inode *inode, struct file *file)
{
struct trace_array *tr = inode->i_private;
trace_array_put(tr);
return seq_release(inode, file);
}
static int
ftrace_event_avail_open(struct inode *inode, struct file *file)
{
const struct seq_operations *seq_ops = &show_event_seq_ops;
/* Checks for tracefs lockdown */
return ftrace_event_open(inode, file, seq_ops);
}
static int
ftrace_event_set_open(struct inode *inode, struct file *file)
{
const struct seq_operations *seq_ops = &show_set_event_seq_ops;
struct trace_array *tr = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(tr);
if (ret)
return ret;
if ((file->f_mode & FMODE_WRITE) &&
(file->f_flags & O_TRUNC))
ftrace_clear_events(tr);
ret = ftrace_event_open(inode, file, seq_ops);
if (ret < 0)
trace_array_put(tr);
return ret;
}
static int
ftrace_event_set_pid_open(struct inode *inode, struct file *file)
{
const struct seq_operations *seq_ops = &show_set_pid_seq_ops;
struct trace_array *tr = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(tr);
if (ret)
return ret;
if ((file->f_mode & FMODE_WRITE) &&
(file->f_flags & O_TRUNC))
ftrace_clear_event_pids(tr, TRACE_PIDS);
ret = ftrace_event_open(inode, file, seq_ops);
if (ret < 0)
trace_array_put(tr);
return ret;
}
static int
ftrace_event_set_npid_open(struct inode *inode, struct file *file)
{
const struct seq_operations *seq_ops = &show_set_no_pid_seq_ops;
struct trace_array *tr = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(tr);
if (ret)
return ret;
if ((file->f_mode & FMODE_WRITE) &&
(file->f_flags & O_TRUNC))
ftrace_clear_event_pids(tr, TRACE_NO_PIDS);
ret = ftrace_event_open(inode, file, seq_ops);
if (ret < 0)
trace_array_put(tr);
return ret;
}
static struct event_subsystem *
create_new_subsystem(const char *name)
{
struct event_subsystem *system;
/* need to create new entry */
system = kmalloc(sizeof(*system), GFP_KERNEL);
if (!system)
return NULL;
system->ref_count = 1;
tracing: Failed to create system directory Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca073c37 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Cc: stable@vger.kernel.org # 3.10 Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-27 21:58:31 +07:00
/* Only allocate if dynamic (kprobes and modules) */
system->name = kstrdup_const(name, GFP_KERNEL);
if (!system->name)
goto out_free;
system->filter = NULL;
system->filter = kzalloc(sizeof(struct event_filter), GFP_KERNEL);
if (!system->filter)
goto out_free;
list_add(&system->list, &event_subsystems);
return system;
out_free:
kfree_const(system->name);
kfree(system);
return NULL;
}
static struct dentry *
event_subsystem_dir(struct trace_array *tr, const char *name,
struct trace_event_file *file, struct dentry *parent)
{
struct trace_subsystem_dir *dir;
struct event_subsystem *system;
tracing/filters: add run-time field descriptions to TRACE_EVENT_FORMAT events This patch adds run-time field descriptions to all the event formats exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers that use them (i.e. the tracers in the 'ftrace subsystem') so they can also have their output filtered by the event-filtering mechanism. When I was testing this, there were a couple of things that fooled me into thinking the filters weren't working, when actually they were - I'll mention them here so others don't make the same mistakes (and file bug reports. ;-) One is that some of the tracers trace multiple events e.g. the sched_switch tracer uses the context_switch and wakeup events, and if you don't set filters on all of the traced events, the unfiltered output from the events without filters on them can make it look like the filtering as a whole isn't working properly, when actually it is doing what it was asked to do - it just wasn't asked to do the right thing. The other is that for the really high-volume tracers e.g. the function tracer, the volume of filtered events can be so high that it pushes the unfiltered events out of the ring buffer before they can be read so e.g. cat'ing the trace file repeatedly shows either no output, or once in awhile some output but that isn't there the next time you read the trace, which isn't what you normally expect when reading the trace file. If you read from the trace_pipe file though, you can catch them before they disappear. Changes from v1: As suggested by Frederic Weisbecker: - get rid of externs in functions - added unlikely() to filter_check_discard() Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 12:48:49 +07:00
struct dentry *entry;
/* First see if we did not already create this dir */
list_for_each_entry(dir, &tr->systems, list) {
system = dir->subsystem;
if (strcmp(system->name, name) == 0) {
dir->nr_events++;
file->system = dir;
return dir->entry;
}
}
/* Now see if the system itself exists. */
list_for_each_entry(system, &event_subsystems, list) {
if (strcmp(system->name, name) == 0)
break;
}
/* Reset system variable when not found */
if (&system->list == &event_subsystems)
system = NULL;
dir = kmalloc(sizeof(*dir), GFP_KERNEL);
if (!dir)
goto out_fail;
if (!system) {
system = create_new_subsystem(name);
if (!system)
goto out_free;
} else
__get_system(system);
dir->entry = tracefs_create_dir(name, parent);
if (!dir->entry) {
pr_warn("Failed to create system directory %s\n", name);
__put_system(system);
goto out_free;
}
dir->tr = tr;
dir->ref_count = 1;
dir->nr_events = 1;
dir->subsystem = system;
file->system = dir;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
entry = tracefs_create_file("filter", 0644, dir->entry, dir,
tracing/filters: add run-time field descriptions to TRACE_EVENT_FORMAT events This patch adds run-time field descriptions to all the event formats exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers that use them (i.e. the tracers in the 'ftrace subsystem') so they can also have their output filtered by the event-filtering mechanism. When I was testing this, there were a couple of things that fooled me into thinking the filters weren't working, when actually they were - I'll mention them here so others don't make the same mistakes (and file bug reports. ;-) One is that some of the tracers trace multiple events e.g. the sched_switch tracer uses the context_switch and wakeup events, and if you don't set filters on all of the traced events, the unfiltered output from the events without filters on them can make it look like the filtering as a whole isn't working properly, when actually it is doing what it was asked to do - it just wasn't asked to do the right thing. The other is that for the really high-volume tracers e.g. the function tracer, the volume of filtered events can be so high that it pushes the unfiltered events out of the ring buffer before they can be read so e.g. cat'ing the trace file repeatedly shows either no output, or once in awhile some output but that isn't there the next time you read the trace, which isn't what you normally expect when reading the trace file. If you read from the trace_pipe file though, you can catch them before they disappear. Changes from v1: As suggested by Frederic Weisbecker: - get rid of externs in functions - added unlikely() to filter_check_discard() Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 12:48:49 +07:00
&ftrace_subsystem_filter_fops);
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
if (!entry) {
kfree(system->filter);
system->filter = NULL;
pr_warn("Could not create tracefs '%s/filter' entry\n", name);
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 15:04:59 +07:00
}
tracing/filters: add run-time field descriptions to TRACE_EVENT_FORMAT events This patch adds run-time field descriptions to all the event formats exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers that use them (i.e. the tracers in the 'ftrace subsystem') so they can also have their output filtered by the event-filtering mechanism. When I was testing this, there were a couple of things that fooled me into thinking the filters weren't working, when actually they were - I'll mention them here so others don't make the same mistakes (and file bug reports. ;-) One is that some of the tracers trace multiple events e.g. the sched_switch tracer uses the context_switch and wakeup events, and if you don't set filters on all of the traced events, the unfiltered output from the events without filters on them can make it look like the filtering as a whole isn't working properly, when actually it is doing what it was asked to do - it just wasn't asked to do the right thing. The other is that for the really high-volume tracers e.g. the function tracer, the volume of filtered events can be so high that it pushes the unfiltered events out of the ring buffer before they can be read so e.g. cat'ing the trace file repeatedly shows either no output, or once in awhile some output but that isn't there the next time you read the trace, which isn't what you normally expect when reading the trace file. If you read from the trace_pipe file though, you can catch them before they disappear. Changes from v1: As suggested by Frederic Weisbecker: - get rid of externs in functions - added unlikely() to filter_check_discard() Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 12:48:49 +07:00
trace_create_file("enable", 0644, dir->entry, dir,
&ftrace_system_enable_fops);
list_add(&dir->list, &tr->systems);
return dir->entry;
out_free:
kfree(dir);
out_fail:
/* Only print this message if failed on memory allocation */
if (!dir || !system)
pr_warn("No memory to create event subsystem %s\n", name);
return NULL;
}
static int
event_create_dir(struct dentry *parent, struct trace_event_file *file)
{
struct trace_event_call *call = file->event_call;
struct trace_array *tr = file->tr;
tracing: Move fields from event to class structure Move the defined fields from the event to the class structure. Since the fields of the event are defined by the class they belong to, it makes sense to have the class hold the information instead of the individual events. The events of the same class would just hold duplicate information. After this change the size of the kernel dropped another 3K: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900252 1057412 861512 6819176 680d68 vmlinux.regs 4900375 1053380 861512 6815267 67fe23 vmlinux.fields Although the text increased, this was mainly due to the C files having to adapt to the change. This is a constant increase, where new tracepoints will not increase the Text. But the big drop is in the data size (as well as needed allocations to hold the fields). This will give even more savings as more tracepoints are created. Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS() with several DEFINE_EVENT()s, then the savings will be lost. But we are pushing developers to consolidate events with DEFINE_EVENT() so this should not be an issue. The kprobes define a unique class to every new event, but are dynamic so it should not be a issue. The syscalls however have a single class but the fields for the individual events are different. The syscalls use a metadata to define the fields. I moved the fields list from the event to the metadata and added a "get_fields()" function to the class. This function is used to find the fields. For normal events and kprobes, get_fields() just returns a pointer to the fields list_head in the class. For syscall events, it returns the fields list_head in the metadata for the event. v2: Fixed the syscall fields. The syscall metadata needs a list of fields for both enter and exit. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-22 21:35:55 +07:00
struct list_head *head;
struct dentry *d_events;
const char *name;
int ret;
/*
* If the trace point header did not define TRACE_SYSTEM
* then the system would be called "TRACE_SYSTEM".
*/
if (strcmp(call->class->system, TRACE_SYSTEM) != 0) {
d_events = event_subsystem_dir(tr, call->class->system, file, parent);
if (!d_events)
return -ENOMEM;
} else
d_events = parent;
name = trace_event_name(call);
file->dir = tracefs_create_dir(name, d_events);
if (!file->dir) {
pr_warn("Could not create tracefs '%s' directory\n", name);
return -1;
}
if (call->class->reg && !(call->flags & TRACE_EVENT_FL_IGNORE_ENABLE))
trace_create_file("enable", 0644, file->dir, file,
&ftrace_enable_fops);
tracing: Remove per event trace registering This patch removes the register functions of TRACE_EVENT() to enable and disable tracepoints. The registering of a event is now down directly in the trace_events.c file. The tracepoint_probe_register() is now called directly. The prototypes are no longer type checked, but this should not be an issue since the tracepoints are created automatically by the macros. If a prototype is incorrect in the TRACE_EVENT() macro, then other macros will catch it. The trace_event_class structure now holds the probes to be called by the callbacks. This removes needing to have each event have a separate pointer for the probe. To handle kprobes and syscalls, since they register probes in a different manner, a "reg" field is added to the ftrace_event_class structure. If the "reg" field is assigned, then it will be called for enabling and disabling of the probe for either ftrace or perf. To let the reg function know what is happening, a new enum (trace_reg) is created that has the type of control that is needed. With this new rework, the 82 kernel events and 618 syscall events has their footprint dramatically lowered: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint 4900252 1057412 861512 6819176 680d68 vmlinux.regs The size went from 6863829 to 6819176, that's a total of 44K in savings. With tracepoints being continuously added, this is critical that the footprint becomes minimal. v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf specific structure in trace_events.c. v4: Fixed trace self tests to check probe because regfunc no longer exists. v3: Updated to handle void *data in beginning of probe parameters. Also added the tracepoint: check_trace_callback_type_##call(). v2: Changed the callback probes to pass void * and typecast the value within the function. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 23:27:06 +07:00
#ifdef CONFIG_PERF_EVENTS
if (call->event.type && call->class->reg)
trace_create_file("id", 0444, file->dir,
(void *)(long)call->event.type,
&ftrace_event_id_fops);
tracing: Remove per event trace registering This patch removes the register functions of TRACE_EVENT() to enable and disable tracepoints. The registering of a event is now down directly in the trace_events.c file. The tracepoint_probe_register() is now called directly. The prototypes are no longer type checked, but this should not be an issue since the tracepoints are created automatically by the macros. If a prototype is incorrect in the TRACE_EVENT() macro, then other macros will catch it. The trace_event_class structure now holds the probes to be called by the callbacks. This removes needing to have each event have a separate pointer for the probe. To handle kprobes and syscalls, since they register probes in a different manner, a "reg" field is added to the ftrace_event_class structure. If the "reg" field is assigned, then it will be called for enabling and disabling of the probe for either ftrace or perf. To let the reg function know what is happening, a new enum (trace_reg) is created that has the type of control that is needed. With this new rework, the 82 kernel events and 618 syscall events has their footprint dramatically lowered: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint 4900252 1057412 861512 6819176 680d68 vmlinux.regs The size went from 6863829 to 6819176, that's a total of 44K in savings. With tracepoints being continuously added, this is critical that the footprint becomes minimal. v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf specific structure in trace_events.c. v4: Fixed trace self tests to check probe because regfunc no longer exists. v3: Updated to handle void *data in beginning of probe parameters. Also added the tracepoint: check_trace_callback_type_##call(). v2: Changed the callback probes to pass void * and typecast the value within the function. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 23:27:06 +07:00
#endif
/*
* Other events may have the same class. Only update
* the fields if they are not already defined.
*/
head = trace_get_fields(call);
if (list_empty(head)) {
ftrace: Rework event_create_dir() Rework event_create_dir() to use an array of static data instead of function pointers where possible. The problem is that it would call the function pointer on module load before parse_args(), possibly even before jump_labels were initialized. Luckily the generated functions don't use jump_labels but it still seems fragile. It also gets in the way of changing when we make the module map executable. The generated function are basically calling trace_define_field() with a bunch of static arguments. So instead of a function, capture these arguments in a static array, avoiding the function call. Now there are a number of cases where the fields are dynamic (syscall arguments, kprobes and uprobes), in which case a static array does not work, for these we preserve the function call. Luckily all these cases are not related to modules and so we can retain the function call for them. Also fix up all broken tracepoint definitions that now generate a compile error. Tested-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191111132458.342979914@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-25 03:26:59 +07:00
struct trace_event_fields *field = call->class->fields_array;
unsigned int offset = sizeof(struct trace_entry);
for (; field->type; field++) {
if (field->type == TRACE_FUNCTION_TYPE) {
ret = field->define_fields(call);
break;
}
offset = ALIGN(offset, field->align);
ret = trace_define_field(call, field->type, field->name,
offset, field->size,
field->is_signed, field->filter_type);
if (ret)
break;
offset += field->size;
}
if (ret < 0) {
pr_warn("Could not initialize trace point events/%s\n",
name);
return -1;
}
}
/*
* Only event directories that can be enabled should have
* triggers or filters.
*/
if (!(call->flags & TRACE_EVENT_FL_IGNORE_ENABLE)) {
trace_create_file("filter", 0644, file->dir, file,
&ftrace_event_filter_fops);
trace_create_file("trigger", 0644, file->dir, file,
&event_trigger_fops);
}
tracing: Add basic event trigger framework Add a 'trigger' file for each trace event, enabling 'trace event triggers' to be set for trace events. 'trace event triggers' are patterned after the existing 'ftrace function triggers' implementation except that triggers are written to per-event 'trigger' files instead of to a single file such as the 'set_ftrace_filter' used for ftrace function triggers. The implementation is meant to be entirely separate from ftrace function triggers, in order to keep the respective implementations relatively simple and to allow them to diverge. The event trigger functionality is built on top of SOFT_DISABLE functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file flags which is checked when any trace event fires. Triggers set for a particular event need to be checked regardless of whether that event is actually enabled or not - getting an event to fire even if it's not enabled is what's already implemented by SOFT_DISABLE mode, so trigger mode directly reuses that. Event trigger essentially inherit the soft disable logic in __ftrace_event_enable_disable() while adding a bit of logic and trigger reference counting via tm_ref on top of that in a new trace_event_trigger_enable_disable() function. Because the base __ftrace_event_enable_disable() code now needs to be invoked from outside trace_events.c, a wrapper is also added for those usages. The triggers for an event are actually invoked via a new function, event_triggers_call(), and code is also added to invoke them for ftrace_raw_event calls as well as syscall events. The main part of the patch creates a new trace_events_trigger.c file to contain the trace event triggers implementation. The standard open, read, and release file operations are implemented here. The open() implementation sets up for the various open modes of the 'trigger' file. It creates and attaches the trigger iterator and sets up the command parser. If opened for reading set up the trigger seq_ops. The read() implementation parses the event trigger written to the 'trigger' file, looks up the trigger command, and passes it along to that event_command's func() implementation for command-specific processing. The release() implementation does whatever cleanup is needed to release the 'trigger' file, like releasing the parser and trigger iterator, etc. A couple of functions for event command registration and unregistration are added, along with a list to add them to and a mutex to protect them, as well as an (initially empty) registration function to add the set of commands that will be added by future commits, and call to it from the trace event initialization code. also added are a couple trigger-specific data structures needed for these implementations such as a trigger iterator and a struct for trigger-specific data. A couple structs consisting mostly of function meant to be implemented in command-specific ways, event_command and event_trigger_ops, are used by the generic event trigger command implementations. They're being put into trace.h alongside the other trace_event data structures and functions, in the expectation that they'll be needed in several trace_event-related files such as trace_events_trigger.c and trace_events.c. The event_command.func() function is meant to be called by the trigger parsing code in order to add a trigger instance to the corresponding event. It essentially coordinates adding a live trigger instance to the event, and arming the triggering the event. Every event_command func() implementation essentially does the same thing for any command: - choose ops - use the value of param to choose either a number or count version of event_trigger_ops specific to the command - do the register or unregister of those ops - associate a filter, if specified, with the triggering event The reg() and unreg() ops allow command-specific implementations for event_trigger_op registration and unregistration, and the get_trigger_ops() op allows command-specific event_trigger_ops selection to be parameterized. When a trigger instance is added, the reg() op essentially adds that trigger to the triggering event and arms it, while unreg() does the opposite. The set_filter() function is used to associate a filter with the trigger - if the command doesn't specify a set_filter() implementation, the command will ignore filters. Each command has an associated trigger_type, which serves double duty, both as a unique identifier for the command as well as a value that can be used for setting a trigger mode bit during trigger invocation. The signature of func() adds a pointer to the event_command struct, used to invoke those functions, along with a command_data param that can be passed to the reg/unreg functions. This allows func() implementations to use command-specific blobs and supports code re-use. The event_trigger_ops.func() command corrsponds to the trigger 'probe' function that gets called when the triggering event is actually invoked. The other functions are used to list the trigger when needed, along with a couple mundane book-keeping functions. This also moves event_file_data() into trace.h so it can be used outside of trace_events.c. Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Idea-by: Steve Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-24 20:59:24 +07:00
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 01:54:42 +07:00
#ifdef CONFIG_HIST_TRIGGERS
trace_create_file("hist", 0444, file->dir, file,
&event_hist_fops);
#endif
#ifdef CONFIG_HIST_TRIGGERS_DEBUG
trace_create_file("hist_debug", 0444, file->dir, file,
&event_hist_debug_fops);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 01:54:42 +07:00
#endif
trace_create_file("format", 0444, file->dir, call,
&ftrace_event_format_fops);
tracing: Introduce trace event injection We have been trying to use rasdaemon to monitor hardware errors like correctable memory errors. rasdaemon uses trace events to monitor various hardware errors. In order to test it, we have to inject some hardware errors, unfortunately not all of them provide error injections. MCE does provide a way to inject MCE errors, but errors like PCI error and devlink error don't, it is not easy to add error injection to each of them. Instead, it is relatively easier to just allow users to inject trace events in a generic way so that all trace events can be injected. This patch introduces trace event injection, where a new 'inject' is added to each tracepoint directory. Users could write into this file with key=value pairs to specify the value of each fields of the trace event, all unspecified fields are set to zero values by default. For example, for the net/net_dev_queue tracepoint, we can inject: INJECT=/sys/kernel/debug/tracing/events/net/net_dev_queue/inject echo "" > $INJECT echo "name='test'" > $INJECT echo "name='test' len=1024" > $INJECT cat /sys/kernel/debug/tracing/trace ... <...>-614 [000] .... 36.571483: net_dev_queue: dev= skbaddr=00000000fbf338c2 len=0 <...>-614 [001] .... 136.588252: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=0 <...>-614 [001] .N.. 208.431878: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=1024 Triggers could be triggered as usual too: echo "stacktrace if len == 1025" > /sys/kernel/debug/tracing/events/net/net_dev_queue/trigger echo "len=1025" > $INJECT cat /sys/kernel/debug/tracing/trace ... bash-614 [000] .... 36.571483: net_dev_queue: dev= skbaddr=00000000fbf338c2 len=0 bash-614 [001] .... 136.588252: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=0 bash-614 [001] .N.. 208.431878: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=1024 bash-614 [001] .N.1 284.236349: <stack trace> => event_inject_write => vfs_write => ksys_write => do_syscall_64 => entry_SYSCALL_64_after_hwframe The only thing that can't be injected is string pointers as they require constant string pointers, this can't be done at run time. Link: http://lkml.kernel.org/r/20191130045218.18979-1-xiyou.wangcong@gmail.com Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-11-30 11:52:18 +07:00
#ifdef CONFIG_TRACE_EVENT_INJECT
if (call->event.type && call->class->reg)
trace_create_file("inject", 0200, file->dir, file,
&event_inject_fops);
#endif
return 0;
}
static void remove_event_from_tracers(struct trace_event_call *call)
{
struct trace_event_file *file;
struct trace_array *tr;
do_for_each_event_file_safe(tr, file) {
if (file->event_call != call)
continue;
remove_event_file_dir(file);
/*
* The do_for_each_event_file_safe() is
* a double loop. After finding the call for this
* trace_array, we use break to jump to the next
* trace_array.
*/
break;
} while_for_each_event_file();
}
static void event_remove(struct trace_event_call *call)
{
struct trace_array *tr;
struct trace_event_file *file;
do_for_each_event_file(tr, file) {
if (file->event_call != call)
continue;
if (file->flags & EVENT_FILE_FL_WAS_ENABLED)
tr->clear_trace = true;
ftrace_event_enable_disable(file, 0);
/*
* The do_for_each_event_file() is
* a double loop. After finding the call for this
* trace_array, we use break to jump to the next
* trace_array.
*/
break;
} while_for_each_event_file();
if (call->event.funcs)
__unregister_trace_event(&call->event);
remove_event_from_tracers(call);
list_del(&call->list);
}
static int event_init(struct trace_event_call *call)
{
int ret = 0;
const char *name;
name = trace_event_name(call);
if (WARN_ON(!name))
return -EINVAL;
if (call->class->raw_init) {
ret = call->class->raw_init(call);
if (ret < 0 && ret != -ENOSYS)
pr_warn("Could not initialize trace events/%s\n", name);
}
return ret;
}
static int
__register_event(struct trace_event_call *call, struct module *mod)
tracing: Ftrace dynamic ftrace_event_call support Add dynamic ftrace_event_call support to ftrace. Trace engines can add new ftrace_event_call to ftrace on the fly. Each operator function of the call takes an ftrace_event_call data structure as an argument, because these functions may be shared among several ftrace_event_calls. Changes from v13: - Define remove_subsystem_dir() always (revirt a2ca5e03), because trace_remove_event_call() uses it. - Modify syscall tracer because of ftrace_event_call change. [fweisbec@gmail.com: Fixed conflict against latest tracing/core] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it> Cc: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-14 03:34:53 +07:00
{
int ret;
ret = event_init(call);
if (ret < 0)
return ret;
list_add(&call->list, &ftrace_events);
call->mod = mod;
return 0;
tracing: Ftrace dynamic ftrace_event_call support Add dynamic ftrace_event_call support to ftrace. Trace engines can add new ftrace_event_call to ftrace on the fly. Each operator function of the call takes an ftrace_event_call data structure as an argument, because these functions may be shared among several ftrace_event_calls. Changes from v13: - Define remove_subsystem_dir() always (revirt a2ca5e03), because trace_remove_event_call() uses it. - Modify syscall tracer because of ftrace_event_call change. [fweisbec@gmail.com: Fixed conflict against latest tracing/core] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it> Cc: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-14 03:34:53 +07:00
}
static char *eval_replace(char *ptr, struct trace_eval_map *map, int len)
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
{
int rlen;
int elen;
/* Find the length of the eval value as a string */
elen = snprintf(ptr, 0, "%ld", map->eval_value);
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
/* Make sure there's enough room to replace the string with the value */
if (len < elen)
return NULL;
snprintf(ptr, elen + 1, "%ld", map->eval_value);
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
/* Get the rest of the string of ptr */
rlen = strlen(ptr + len);
memmove(ptr + elen, ptr + len, rlen);
/* Make sure we end the new string */
ptr[elen + rlen] = 0;
return ptr + elen;
}
static void update_event_printk(struct trace_event_call *call,
struct trace_eval_map *map)
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
{
char *ptr;
int quote = 0;
int len = strlen(map->eval_string);
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
for (ptr = call->print_fmt; *ptr; ptr++) {
if (*ptr == '\\') {
ptr++;
/* paranoid */
if (!*ptr)
break;
continue;
}
if (*ptr == '"') {
quote ^= 1;
continue;
}
if (quote)
continue;
if (isdigit(*ptr)) {
/* skip numbers */
do {
ptr++;
/* Check for alpha chars like ULL */
} while (isalnum(*ptr));
if (!*ptr)
break;
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
/*
* A number must have some kind of delimiter after
* it, and we can ignore that too.
*/
continue;
}
if (isalpha(*ptr) || *ptr == '_') {
if (strncmp(map->eval_string, ptr, len) == 0 &&
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
!isalnum(ptr[len]) && ptr[len] != '_') {
ptr = eval_replace(ptr, map, len);
/* enum/sizeof string smaller than value */
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
if (WARN_ON_ONCE(!ptr))
return;
/*
* No need to decrement here, as eval_replace()
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
* returns the pointer to the character passed
* the eval, and two evals can not be placed
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
* back to back without something in between.
* We can skip that something in between.
*/
continue;
}
skip_more:
do {
ptr++;
} while (isalnum(*ptr) || *ptr == '_');
if (!*ptr)
break;
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
/*
* If what comes after this variable is a '.' or
* '->' then we can continue to ignore that string.
*/
if (*ptr == '.' || (ptr[0] == '-' && ptr[1] == '>')) {
ptr += *ptr == '.' ? 1 : 2;
if (!*ptr)
break;
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
goto skip_more;
}
/*
* Once again, we can skip the delimiter that came
* after the string.
*/
continue;
}
}
}
void trace_event_eval_update(struct trace_eval_map **map, int len)
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
{
struct trace_event_call *call, *p;
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
const char *last_system = NULL;
tracing: Fix converting enum's from the map in trace_event_eval_update() Since enums do not get converted by the TRACE_EVENT macro into their values, the event format displaces the enum name and not the value. This breaks tools like perf and trace-cmd that need to interpret the raw binary data. To solve this, an enum map was created to convert these enums into their actual numbers on boot up. This is done by TRACE_EVENTS() adding a TRACE_DEFINE_ENUM() macro. Some enums were not being converted. This was caused by an optization that had a bug in it. All calls get checked against this enum map to see if it should be converted or not, and it compares the call's system to the system that the enum map was created under. If they match, then they call is processed. To cut down on the number of iterations needed to find the maps with a matching system, since calls and maps are grouped by system, when a match is made, the index into the map array is saved, so that the next call, if it belongs to the same system as the previous call, could start right at that array index and not have to scan all the previous arrays. The problem was, the saved index was used as the variable to know if this is a call in a new system or not. If the index was zero, it was assumed that the call is in a new system and would keep incrementing the saved index until it found a matching system. The issue arises when the first matching system was at index zero. The next map, if it belonged to the same system, would then think it was the first match and increment the index to one. If the next call belong to the same system, it would begin its search of the maps off by one, and miss the first enum that should be converted. This left a single enum not converted properly. Also add a comment to describe exactly what that index was for. It took me a bit too long to figure out what I was thinking when debugging this issue. Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com Cc: stable@vger.kernel.org Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values") Reported-by: Chuck Lever <chuck.lever@oracle.com> Teste-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-19 03:53:10 +07:00
bool first = false;
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
int last_i;
int i;
down_write(&trace_event_sem);
list_for_each_entry_safe(call, p, &ftrace_events, list) {
/* events are usually grouped together with systems */
if (!last_system || call->class->system != last_system) {
tracing: Fix converting enum's from the map in trace_event_eval_update() Since enums do not get converted by the TRACE_EVENT macro into their values, the event format displaces the enum name and not the value. This breaks tools like perf and trace-cmd that need to interpret the raw binary data. To solve this, an enum map was created to convert these enums into their actual numbers on boot up. This is done by TRACE_EVENTS() adding a TRACE_DEFINE_ENUM() macro. Some enums were not being converted. This was caused by an optization that had a bug in it. All calls get checked against this enum map to see if it should be converted or not, and it compares the call's system to the system that the enum map was created under. If they match, then they call is processed. To cut down on the number of iterations needed to find the maps with a matching system, since calls and maps are grouped by system, when a match is made, the index into the map array is saved, so that the next call, if it belongs to the same system as the previous call, could start right at that array index and not have to scan all the previous arrays. The problem was, the saved index was used as the variable to know if this is a call in a new system or not. If the index was zero, it was assumed that the call is in a new system and would keep incrementing the saved index until it found a matching system. The issue arises when the first matching system was at index zero. The next map, if it belonged to the same system, would then think it was the first match and increment the index to one. If the next call belong to the same system, it would begin its search of the maps off by one, and miss the first enum that should be converted. This left a single enum not converted properly. Also add a comment to describe exactly what that index was for. It took me a bit too long to figure out what I was thinking when debugging this issue. Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com Cc: stable@vger.kernel.org Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values") Reported-by: Chuck Lever <chuck.lever@oracle.com> Teste-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-19 03:53:10 +07:00
first = true;
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
last_i = 0;
last_system = call->class->system;
}
tracing: Fix converting enum's from the map in trace_event_eval_update() Since enums do not get converted by the TRACE_EVENT macro into their values, the event format displaces the enum name and not the value. This breaks tools like perf and trace-cmd that need to interpret the raw binary data. To solve this, an enum map was created to convert these enums into their actual numbers on boot up. This is done by TRACE_EVENTS() adding a TRACE_DEFINE_ENUM() macro. Some enums were not being converted. This was caused by an optization that had a bug in it. All calls get checked against this enum map to see if it should be converted or not, and it compares the call's system to the system that the enum map was created under. If they match, then they call is processed. To cut down on the number of iterations needed to find the maps with a matching system, since calls and maps are grouped by system, when a match is made, the index into the map array is saved, so that the next call, if it belongs to the same system as the previous call, could start right at that array index and not have to scan all the previous arrays. The problem was, the saved index was used as the variable to know if this is a call in a new system or not. If the index was zero, it was assumed that the call is in a new system and would keep incrementing the saved index until it found a matching system. The issue arises when the first matching system was at index zero. The next map, if it belonged to the same system, would then think it was the first match and increment the index to one. If the next call belong to the same system, it would begin its search of the maps off by one, and miss the first enum that should be converted. This left a single enum not converted properly. Also add a comment to describe exactly what that index was for. It took me a bit too long to figure out what I was thinking when debugging this issue. Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com Cc: stable@vger.kernel.org Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values") Reported-by: Chuck Lever <chuck.lever@oracle.com> Teste-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-19 03:53:10 +07:00
/*
* Since calls are grouped by systems, the likelyhood that the
* next call in the iteration belongs to the same system as the
* previous call is high. As an optimization, we skip seaching
* for a map[] that matches the call's system if the last call
* was from the same system. That's what last_i is for. If the
* call has the same system as the previous call, then last_i
* will be the index of the first map[] that has a matching
* system.
*/
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
for (i = last_i; i < len; i++) {
if (call->class->system == map[i]->system) {
/* Save the first system if need be */
tracing: Fix converting enum's from the map in trace_event_eval_update() Since enums do not get converted by the TRACE_EVENT macro into their values, the event format displaces the enum name and not the value. This breaks tools like perf and trace-cmd that need to interpret the raw binary data. To solve this, an enum map was created to convert these enums into their actual numbers on boot up. This is done by TRACE_EVENTS() adding a TRACE_DEFINE_ENUM() macro. Some enums were not being converted. This was caused by an optization that had a bug in it. All calls get checked against this enum map to see if it should be converted or not, and it compares the call's system to the system that the enum map was created under. If they match, then they call is processed. To cut down on the number of iterations needed to find the maps with a matching system, since calls and maps are grouped by system, when a match is made, the index into the map array is saved, so that the next call, if it belongs to the same system as the previous call, could start right at that array index and not have to scan all the previous arrays. The problem was, the saved index was used as the variable to know if this is a call in a new system or not. If the index was zero, it was assumed that the call is in a new system and would keep incrementing the saved index until it found a matching system. The issue arises when the first matching system was at index zero. The next map, if it belonged to the same system, would then think it was the first match and increment the index to one. If the next call belong to the same system, it would begin its search of the maps off by one, and miss the first enum that should be converted. This left a single enum not converted properly. Also add a comment to describe exactly what that index was for. It took me a bit too long to figure out what I was thinking when debugging this issue. Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com Cc: stable@vger.kernel.org Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values") Reported-by: Chuck Lever <chuck.lever@oracle.com> Teste-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-19 03:53:10 +07:00
if (first) {
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
last_i = i;
tracing: Fix converting enum's from the map in trace_event_eval_update() Since enums do not get converted by the TRACE_EVENT macro into their values, the event format displaces the enum name and not the value. This breaks tools like perf and trace-cmd that need to interpret the raw binary data. To solve this, an enum map was created to convert these enums into their actual numbers on boot up. This is done by TRACE_EVENTS() adding a TRACE_DEFINE_ENUM() macro. Some enums were not being converted. This was caused by an optization that had a bug in it. All calls get checked against this enum map to see if it should be converted or not, and it compares the call's system to the system that the enum map was created under. If they match, then they call is processed. To cut down on the number of iterations needed to find the maps with a matching system, since calls and maps are grouped by system, when a match is made, the index into the map array is saved, so that the next call, if it belongs to the same system as the previous call, could start right at that array index and not have to scan all the previous arrays. The problem was, the saved index was used as the variable to know if this is a call in a new system or not. If the index was zero, it was assumed that the call is in a new system and would keep incrementing the saved index until it found a matching system. The issue arises when the first matching system was at index zero. The next map, if it belonged to the same system, would then think it was the first match and increment the index to one. If the next call belong to the same system, it would begin its search of the maps off by one, and miss the first enum that should be converted. This left a single enum not converted properly. Also add a comment to describe exactly what that index was for. It took me a bit too long to figure out what I was thinking when debugging this issue. Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com Cc: stable@vger.kernel.org Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values") Reported-by: Chuck Lever <chuck.lever@oracle.com> Teste-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-19 03:53:10 +07:00
first = false;
}
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values Several tracepoints use the helper functions __print_symbolic() or __print_flags() and pass in enums that do the mapping between the binary data stored and the value to print. This works well for reading the ASCII trace files, but when the data is read via userspace tools such as perf and trace-cmd, the conversion of the binary value to a human string format is lost if an enum is used, as userspace does not have access to what the ENUM is. For example, the tracepoint trace_tlb_flush() has: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) Which maps the enum values to the strings they represent. But perf and trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would not be able to map it. With TRACE_DEFINE_ENUM(), developers can place these in the event header files and ftrace will convert the enums to their values: By adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format [...] __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" }) The above is what userspace expects to see, and tools do not need to be modified to parse them. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Cc: Guilherme Cox <cox@computer.org> Cc: Tony Luck <tony.luck@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 04:58:09 +07:00
update_event_printk(call, map[i]);
}
}
}
up_write(&trace_event_sem);
}
static struct trace_event_file *
trace_create_new_event(struct trace_event_call *call,
struct trace_array *tr)
{
struct trace_event_file *file;
file = kmem_cache_alloc(file_cachep, GFP_TRACE);
if (!file)
return NULL;
file->event_call = call;
file->tr = tr;
atomic_set(&file->sm_ref, 0);
tracing: Add basic event trigger framework Add a 'trigger' file for each trace event, enabling 'trace event triggers' to be set for trace events. 'trace event triggers' are patterned after the existing 'ftrace function triggers' implementation except that triggers are written to per-event 'trigger' files instead of to a single file such as the 'set_ftrace_filter' used for ftrace function triggers. The implementation is meant to be entirely separate from ftrace function triggers, in order to keep the respective implementations relatively simple and to allow them to diverge. The event trigger functionality is built on top of SOFT_DISABLE functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file flags which is checked when any trace event fires. Triggers set for a particular event need to be checked regardless of whether that event is actually enabled or not - getting an event to fire even if it's not enabled is what's already implemented by SOFT_DISABLE mode, so trigger mode directly reuses that. Event trigger essentially inherit the soft disable logic in __ftrace_event_enable_disable() while adding a bit of logic and trigger reference counting via tm_ref on top of that in a new trace_event_trigger_enable_disable() function. Because the base __ftrace_event_enable_disable() code now needs to be invoked from outside trace_events.c, a wrapper is also added for those usages. The triggers for an event are actually invoked via a new function, event_triggers_call(), and code is also added to invoke them for ftrace_raw_event calls as well as syscall events. The main part of the patch creates a new trace_events_trigger.c file to contain the trace event triggers implementation. The standard open, read, and release file operations are implemented here. The open() implementation sets up for the various open modes of the 'trigger' file. It creates and attaches the trigger iterator and sets up the command parser. If opened for reading set up the trigger seq_ops. The read() implementation parses the event trigger written to the 'trigger' file, looks up the trigger command, and passes it along to that event_command's func() implementation for command-specific processing. The release() implementation does whatever cleanup is needed to release the 'trigger' file, like releasing the parser and trigger iterator, etc. A couple of functions for event command registration and unregistration are added, along with a list to add them to and a mutex to protect them, as well as an (initially empty) registration function to add the set of commands that will be added by future commits, and call to it from the trace event initialization code. also added are a couple trigger-specific data structures needed for these implementations such as a trigger iterator and a struct for trigger-specific data. A couple structs consisting mostly of function meant to be implemented in command-specific ways, event_command and event_trigger_ops, are used by the generic event trigger command implementations. They're being put into trace.h alongside the other trace_event data structures and functions, in the expectation that they'll be needed in several trace_event-related files such as trace_events_trigger.c and trace_events.c. The event_command.func() function is meant to be called by the trigger parsing code in order to add a trigger instance to the corresponding event. It essentially coordinates adding a live trigger instance to the event, and arming the triggering the event. Every event_command func() implementation essentially does the same thing for any command: - choose ops - use the value of param to choose either a number or count version of event_trigger_ops specific to the command - do the register or unregister of those ops - associate a filter, if specified, with the triggering event The reg() and unreg() ops allow command-specific implementations for event_trigger_op registration and unregistration, and the get_trigger_ops() op allows command-specific event_trigger_ops selection to be parameterized. When a trigger instance is added, the reg() op essentially adds that trigger to the triggering event and arms it, while unreg() does the opposite. The set_filter() function is used to associate a filter with the trigger - if the command doesn't specify a set_filter() implementation, the command will ignore filters. Each command has an associated trigger_type, which serves double duty, both as a unique identifier for the command as well as a value that can be used for setting a trigger mode bit during trigger invocation. The signature of func() adds a pointer to the event_command struct, used to invoke those functions, along with a command_data param that can be passed to the reg/unreg functions. This allows func() implementations to use command-specific blobs and supports code re-use. The event_trigger_ops.func() command corrsponds to the trigger 'probe' function that gets called when the triggering event is actually invoked. The other functions are used to list the trigger when needed, along with a couple mundane book-keeping functions. This also moves event_file_data() into trace.h so it can be used outside of trace_events.c. Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Idea-by: Steve Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-24 20:59:24 +07:00
atomic_set(&file->tm_ref, 0);
INIT_LIST_HEAD(&file->triggers);
list_add(&file->list, &tr->events);
return file;
}
/* Add an event to a trace directory */
static int
__trace_add_new_event(struct trace_event_call *call, struct trace_array *tr)
{
struct trace_event_file *file;
file = trace_create_new_event(call, tr);
if (!file)
return -ENOMEM;
return event_create_dir(tr->event_dir, file);
}
/*
* Just create a decriptor for early init. A descriptor is required
* for enabling events at boot. We want to enable events before
* the filesystem is initialized.
*/
static __init int
__trace_early_add_new_event(struct trace_event_call *call,
struct trace_array *tr)
{
struct trace_event_file *file;
file = trace_create_new_event(call, tr);
if (!file)
return -ENOMEM;
return 0;
}
struct ftrace_module_file_ops;
static void __add_event_to_tracers(struct trace_event_call *call);
/* Add an additional event_call dynamically */
int trace_add_event_call(struct trace_event_call *call)
tracing: Ftrace dynamic ftrace_event_call support Add dynamic ftrace_event_call support to ftrace. Trace engines can add new ftrace_event_call to ftrace on the fly. Each operator function of the call takes an ftrace_event_call data structure as an argument, because these functions may be shared among several ftrace_event_calls. Changes from v13: - Define remove_subsystem_dir() always (revirt a2ca5e03), because trace_remove_event_call() uses it. - Modify syscall tracer because of ftrace_event_call change. [fweisbec@gmail.com: Fixed conflict against latest tracing/core] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it> Cc: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-14 03:34:53 +07:00
{
int ret;
tracing: Lock event_mutex before synth_event_mutex synthetic event is using synth_event_mutex for protecting synth_event_list, and event_trigger_write() path acquires locks as below order. event_trigger_write(event_mutex) ->trigger_process_regex(trigger_cmd_mutex) ->event_hist_trigger_func(synth_event_mutex) On the other hand, synthetic event creation and deletion paths call trace_add_event_call() and trace_remove_event_call() which acquires event_mutex. In that case, if we keep the synth_event_mutex locked while registering/unregistering synthetic events, its dependency will be inversed. To avoid this issue, current synthetic event is using a 2 phase process to create/delete events. For example, it searches existing events under synth_event_mutex to check for event-name conflicts, and unlocks synth_event_mutex, then registers a new event under event_mutex locked. Finally, it locks synth_event_mutex and tries to add the new event to the list. But it can introduce complexity and a chance for name conflicts. To solve this simpler, this introduces trace_add_event_call_nolock() and trace_remove_event_call_nolock() which don't acquire event_mutex inside. synthetic event can lock event_mutex before synth_event_mutex to solve the lock dependency issue simpler. Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-05 16:00:43 +07:00
lockdep_assert_held(&event_mutex);
mutex_lock(&trace_types_lock);
ret = __register_event(call, NULL);
if (ret >= 0)
__add_event_to_tracers(call);
mutex_unlock(&trace_types_lock);
tracing: Lock event_mutex before synth_event_mutex synthetic event is using synth_event_mutex for protecting synth_event_list, and event_trigger_write() path acquires locks as below order. event_trigger_write(event_mutex) ->trigger_process_regex(trigger_cmd_mutex) ->event_hist_trigger_func(synth_event_mutex) On the other hand, synthetic event creation and deletion paths call trace_add_event_call() and trace_remove_event_call() which acquires event_mutex. In that case, if we keep the synth_event_mutex locked while registering/unregistering synthetic events, its dependency will be inversed. To avoid this issue, current synthetic event is using a 2 phase process to create/delete events. For example, it searches existing events under synth_event_mutex to check for event-name conflicts, and unlocks synth_event_mutex, then registers a new event under event_mutex locked. Finally, it locks synth_event_mutex and tries to add the new event to the list. But it can introduce complexity and a chance for name conflicts. To solve this simpler, this introduces trace_add_event_call_nolock() and trace_remove_event_call_nolock() which don't acquire event_mutex inside. synthetic event can lock event_mutex before synth_event_mutex to solve the lock dependency issue simpler. Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-05 16:00:43 +07:00
return ret;
}
/*
* Must be called under locking of trace_types_lock, event_mutex and
* trace_event_sem.
*/
static void __trace_remove_event_call(struct trace_event_call *call)
tracing: Ftrace dynamic ftrace_event_call support Add dynamic ftrace_event_call support to ftrace. Trace engines can add new ftrace_event_call to ftrace on the fly. Each operator function of the call takes an ftrace_event_call data structure as an argument, because these functions may be shared among several ftrace_event_calls. Changes from v13: - Define remove_subsystem_dir() always (revirt a2ca5e03), because trace_remove_event_call() uses it. - Modify syscall tracer because of ftrace_event_call change. [fweisbec@gmail.com: Fixed conflict against latest tracing/core] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it> Cc: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-14 03:34:53 +07:00
{
event_remove(call);
tracing: Ftrace dynamic ftrace_event_call support Add dynamic ftrace_event_call support to ftrace. Trace engines can add new ftrace_event_call to ftrace on the fly. Each operator function of the call takes an ftrace_event_call data structure as an argument, because these functions may be shared among several ftrace_event_calls. Changes from v13: - Define remove_subsystem_dir() always (revirt a2ca5e03), because trace_remove_event_call() uses it. - Modify syscall tracer because of ftrace_event_call change. [fweisbec@gmail.com: Fixed conflict against latest tracing/core] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it> Cc: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-14 03:34:53 +07:00
trace_destroy_fields(call);
free_event_filter(call->filter);
call->filter = NULL;
tracing: Ftrace dynamic ftrace_event_call support Add dynamic ftrace_event_call support to ftrace. Trace engines can add new ftrace_event_call to ftrace on the fly. Each operator function of the call takes an ftrace_event_call data structure as an argument, because these functions may be shared among several ftrace_event_calls. Changes from v13: - Define remove_subsystem_dir() always (revirt a2ca5e03), because trace_remove_event_call() uses it. - Modify syscall tracer because of ftrace_event_call change. [fweisbec@gmail.com: Fixed conflict against latest tracing/core] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it> Cc: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-14 03:34:53 +07:00
}
static int probe_remove_event_call(struct trace_event_call *call)
{
struct trace_array *tr;
struct trace_event_file *file;
#ifdef CONFIG_PERF_EVENTS
if (call->perf_refcount)
return -EBUSY;
#endif
do_for_each_event_file(tr, file) {
if (file->event_call != call)
continue;
/*
* We can't rely on ftrace_event_enable_disable(enable => 0)
* we are going to do, EVENT_FILE_FL_SOFT_MODE can suppress
* TRACE_REG_UNREGISTER.
*/
if (file->flags & EVENT_FILE_FL_ENABLED)
return -EBUSY;
/*
* The do_for_each_event_file_safe() is
* a double loop. After finding the call for this
* trace_array, we use break to jump to the next
* trace_array.
*/
break;
} while_for_each_event_file();
__trace_remove_event_call(call);
return 0;
}
/* Remove an event_call */
int trace_remove_event_call(struct trace_event_call *call)
tracing: Ftrace dynamic ftrace_event_call support Add dynamic ftrace_event_call support to ftrace. Trace engines can add new ftrace_event_call to ftrace on the fly. Each operator function of the call takes an ftrace_event_call data structure as an argument, because these functions may be shared among several ftrace_event_calls. Changes from v13: - Define remove_subsystem_dir() always (revirt a2ca5e03), because trace_remove_event_call() uses it. - Modify syscall tracer because of ftrace_event_call change. [fweisbec@gmail.com: Fixed conflict against latest tracing/core] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it> Cc: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-14 03:34:53 +07:00
{
int ret;
tracing: Lock event_mutex before synth_event_mutex synthetic event is using synth_event_mutex for protecting synth_event_list, and event_trigger_write() path acquires locks as below order. event_trigger_write(event_mutex) ->trigger_process_regex(trigger_cmd_mutex) ->event_hist_trigger_func(synth_event_mutex) On the other hand, synthetic event creation and deletion paths call trace_add_event_call() and trace_remove_event_call() which acquires event_mutex. In that case, if we keep the synth_event_mutex locked while registering/unregistering synthetic events, its dependency will be inversed. To avoid this issue, current synthetic event is using a 2 phase process to create/delete events. For example, it searches existing events under synth_event_mutex to check for event-name conflicts, and unlocks synth_event_mutex, then registers a new event under event_mutex locked. Finally, it locks synth_event_mutex and tries to add the new event to the list. But it can introduce complexity and a chance for name conflicts. To solve this simpler, this introduces trace_add_event_call_nolock() and trace_remove_event_call_nolock() which don't acquire event_mutex inside. synthetic event can lock event_mutex before synth_event_mutex to solve the lock dependency issue simpler. Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-05 16:00:43 +07:00
lockdep_assert_held(&event_mutex);
mutex_lock(&trace_types_lock);
down_write(&trace_event_sem);
ret = probe_remove_event_call(call);
up_write(&trace_event_sem);
mutex_unlock(&trace_types_lock);
tracing: Lock event_mutex before synth_event_mutex synthetic event is using synth_event_mutex for protecting synth_event_list, and event_trigger_write() path acquires locks as below order. event_trigger_write(event_mutex) ->trigger_process_regex(trigger_cmd_mutex) ->event_hist_trigger_func(synth_event_mutex) On the other hand, synthetic event creation and deletion paths call trace_add_event_call() and trace_remove_event_call() which acquires event_mutex. In that case, if we keep the synth_event_mutex locked while registering/unregistering synthetic events, its dependency will be inversed. To avoid this issue, current synthetic event is using a 2 phase process to create/delete events. For example, it searches existing events under synth_event_mutex to check for event-name conflicts, and unlocks synth_event_mutex, then registers a new event under event_mutex locked. Finally, it locks synth_event_mutex and tries to add the new event to the list. But it can introduce complexity and a chance for name conflicts. To solve this simpler, this introduces trace_add_event_call_nolock() and trace_remove_event_call_nolock() which don't acquire event_mutex inside. synthetic event can lock event_mutex before synth_event_mutex to solve the lock dependency issue simpler. Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-05 16:00:43 +07:00
return ret;
}
tracing: Ftrace dynamic ftrace_event_call support Add dynamic ftrace_event_call support to ftrace. Trace engines can add new ftrace_event_call to ftrace on the fly. Each operator function of the call takes an ftrace_event_call data structure as an argument, because these functions may be shared among several ftrace_event_calls. Changes from v13: - Define remove_subsystem_dir() always (revirt a2ca5e03), because trace_remove_event_call() uses it. - Modify syscall tracer because of ftrace_event_call change. [fweisbec@gmail.com: Fixed conflict against latest tracing/core] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it> Cc: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-14 03:34:53 +07:00
#define for_each_event(event, start, end) \
for (event = start; \
(unsigned long)event < (unsigned long)end; \
event++)
#ifdef CONFIG_MODULES
static void trace_module_add_events(struct module *mod)
{
struct trace_event_call **call, **start, **end;
if (!mod->num_trace_events)
return;
/* Don't add infrastructure for mods without tracepoints */
if (trace_module_has_bad_taint(mod)) {
pr_err("%s: module has bad taint, not creating trace events\n",
mod->name);
return;
}
start = mod->trace_events;
end = mod->trace_events + mod->num_trace_events;
for_each_event(call, start, end) {
__register_event(*call, mod);
__add_event_to_tracers(*call);
}
}
static void trace_module_remove_events(struct module *mod)
{
struct trace_event_call *call, *p;
down_write(&trace_event_sem);
list_for_each_entry_safe(call, p, &ftrace_events, list) {
if (call->mod == mod)
tracing: Ftrace dynamic ftrace_event_call support Add dynamic ftrace_event_call support to ftrace. Trace engines can add new ftrace_event_call to ftrace on the fly. Each operator function of the call takes an ftrace_event_call data structure as an argument, because these functions may be shared among several ftrace_event_calls. Changes from v13: - Define remove_subsystem_dir() always (revirt a2ca5e03), because trace_remove_event_call() uses it. - Modify syscall tracer because of ftrace_event_call change. [fweisbec@gmail.com: Fixed conflict against latest tracing/core] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it> Cc: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-14 03:34:53 +07:00
__trace_remove_event_call(call);
}
up_write(&trace_event_sem);
/*
* It is safest to reset the ring buffer if the module being unloaded
* registered any events that were used. The only worry is if
* a new module gets loaded, and takes on the same id as the events
* of this module. When printing out the buffer, traced events left
* over from this module may be passed to the new module events and
* unexpected results may occur.
*/
tracing_reset_all_online_cpus();
}
static int trace_module_notify(struct notifier_block *self,
unsigned long val, void *data)
{
struct module *mod = data;
mutex_lock(&event_mutex);
mutex_lock(&trace_types_lock);
switch (val) {
case MODULE_STATE_COMING:
trace_module_add_events(mod);
break;
case MODULE_STATE_GOING:
trace_module_remove_events(mod);
break;
}
mutex_unlock(&trace_types_lock);
mutex_unlock(&event_mutex);
return NOTIFY_OK;
}
static struct notifier_block trace_module_nb = {
.notifier_call = trace_module_notify,
.priority = 1, /* higher than trace.c module notify */
};
#endif /* CONFIG_MODULES */
/* Create a new event directory structure for a trace directory. */
static void
__trace_add_event_dirs(struct trace_array *tr)
{
struct trace_event_call *call;
int ret;
list_for_each_entry(call, &ftrace_events, list) {
ret = __trace_add_new_event(call, tr);
if (ret < 0)
pr_warn("Could not create directory for event %s\n",
trace_event_name(call));
}
}
/* Returns any file that matches the system and event */
struct trace_event_file *
__find_event_file(struct trace_array *tr, const char *system, const char *event)
{
struct trace_event_file *file;
struct trace_event_call *call;
const char *name;
list_for_each_entry(file, &tr->events, list) {
call = file->event_call;
name = trace_event_name(call);
if (!name || !call->class)
continue;
if (strcmp(event, name) == 0 &&
strcmp(system, call->class->system) == 0)
return file;
}
return NULL;
}
/* Returns valid trace event files that match system and event */
struct trace_event_file *
find_event_file(struct trace_array *tr, const char *system, const char *event)
{
struct trace_event_file *file;
file = __find_event_file(tr, system, event);
if (!file || !file->event_call->class->reg ||
file->event_call->flags & TRACE_EVENT_FL_IGNORE_ENABLE)
return NULL;
return file;
}
/**
* trace_get_event_file - Find and return a trace event file
* @instance: The name of the trace instance containing the event
* @system: The name of the system containing the event
* @event: The name of the event
*
* Return a trace event file given the trace instance name, trace
* system, and trace event name. If the instance name is NULL, it
* refers to the top-level trace array.
*
* This function will look it up and return it if found, after calling
* trace_array_get() to prevent the instance from going away, and
* increment the event's module refcount to prevent it from being
* removed.
*
* To release the file, call trace_put_event_file(), which will call
* trace_array_put() and decrement the event's module refcount.
*
* Return: The trace event on success, ERR_PTR otherwise.
*/
struct trace_event_file *trace_get_event_file(const char *instance,
const char *system,
const char *event)
{
struct trace_array *tr = top_trace_array();
struct trace_event_file *file = NULL;
int ret = -EINVAL;
if (instance) {
tr = trace_array_find_get(instance);
if (!tr)
return ERR_PTR(-ENOENT);
} else {
ret = trace_array_get(tr);
if (ret)
return ERR_PTR(ret);
}
mutex_lock(&event_mutex);
file = find_event_file(tr, system, event);
if (!file) {
trace_array_put(tr);
ret = -EINVAL;
goto out;
}
/* Don't let event modules unload while in use */
ret = try_module_get(file->event_call->mod);
if (!ret) {
trace_array_put(tr);
ret = -EBUSY;
goto out;
}
ret = 0;
out:
mutex_unlock(&event_mutex);
if (ret)
file = ERR_PTR(ret);
return file;
}
EXPORT_SYMBOL_GPL(trace_get_event_file);
/**
* trace_put_event_file - Release a file from trace_get_event_file()
* @file: The trace event file
*
* If a file was retrieved using trace_get_event_file(), this should
* be called when it's no longer needed. It will cancel the previous
* trace_array_get() called by that function, and decrement the
* event's module refcount.
*/
void trace_put_event_file(struct trace_event_file *file)
{
mutex_lock(&event_mutex);
module_put(file->event_call->mod);
mutex_unlock(&event_mutex);
trace_array_put(file->tr);
}
EXPORT_SYMBOL_GPL(trace_put_event_file);
#ifdef CONFIG_DYNAMIC_FTRACE
/* Avoid typos */
#define ENABLE_EVENT_STR "enable_event"
#define DISABLE_EVENT_STR "disable_event"
struct event_probe_data {
struct trace_event_file *file;
unsigned long count;
int ref;
bool enable;
};
static void update_event_probe(struct event_probe_data *data)
{
if (data->enable)
clear_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &data->file->flags);
else
set_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &data->file->flags);
}
static void
event_enable_probe(unsigned long ip, unsigned long parent_ip,
struct trace_array *tr, struct ftrace_probe_ops *ops,
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
void *data)
{
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
struct ftrace_func_mapper *mapper = data;
struct event_probe_data *edata;
void **pdata;
pdata = ftrace_func_mapper_find_ip(mapper, ip);
if (!pdata || !*pdata)
return;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
edata = *pdata;
update_event_probe(edata);
}
static void
event_enable_count_probe(unsigned long ip, unsigned long parent_ip,
struct trace_array *tr, struct ftrace_probe_ops *ops,
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
void *data)
{
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
struct ftrace_func_mapper *mapper = data;
struct event_probe_data *edata;
void **pdata;
pdata = ftrace_func_mapper_find_ip(mapper, ip);
if (!pdata || !*pdata)
return;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
edata = *pdata;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
if (!edata->count)
return;
/* Skip if the event is in a state we want to switch to */
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
if (edata->enable == !(edata->file->flags & EVENT_FILE_FL_SOFT_DISABLED))
return;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
if (edata->count != -1)
(edata->count)--;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
update_event_probe(edata);
}
static int
event_enable_print(struct seq_file *m, unsigned long ip,
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
struct ftrace_probe_ops *ops, void *data)
{
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
struct ftrace_func_mapper *mapper = data;
struct event_probe_data *edata;
void **pdata;
pdata = ftrace_func_mapper_find_ip(mapper, ip);
if (WARN_ON_ONCE(!pdata || !*pdata))
return 0;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
edata = *pdata;
seq_printf(m, "%ps:", (void *)ip);
seq_printf(m, "%s:%s:%s",
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
edata->enable ? ENABLE_EVENT_STR : DISABLE_EVENT_STR,
edata->file->event_call->class->system,
trace_event_name(edata->file->event_call));
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
if (edata->count == -1)
seq_puts(m, ":unlimited\n");
else
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
seq_printf(m, ":count=%ld\n", edata->count);
return 0;
}
static int
event_enable_init(struct ftrace_probe_ops *ops, struct trace_array *tr,
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
unsigned long ip, void *init_data, void **data)
{
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
struct ftrace_func_mapper *mapper = *data;
struct event_probe_data *edata = init_data;
int ret;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
if (!mapper) {
mapper = allocate_ftrace_func_mapper();
if (!mapper)
return -ENODEV;
*data = mapper;
}
ret = ftrace_func_mapper_add_ip(mapper, ip, edata);
if (ret < 0)
return ret;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
edata->ref++;
return 0;
}
static int free_probe_data(void *data)
{
struct event_probe_data *edata = data;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
edata->ref--;
if (!edata->ref) {
/* Remove the SOFT_MODE flag */
__ftrace_event_enable_disable(edata->file, 0, 1);
module_put(edata->file->event_call->mod);
kfree(edata);
}
return 0;
}
static void
event_enable_free(struct ftrace_probe_ops *ops, struct trace_array *tr,
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
unsigned long ip, void *data)
{
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
struct ftrace_func_mapper *mapper = data;
struct event_probe_data *edata;
if (!ip) {
if (!mapper)
return;
free_ftrace_func_mapper(mapper, free_probe_data);
return;
}
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
edata = ftrace_func_mapper_remove_ip(mapper, ip);
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
if (WARN_ON_ONCE(!edata))
return;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
if (WARN_ON_ONCE(edata->ref <= 0))
return;
tracing/ftrace: Add a better way to pass data via the probe functions With the redesign of the registration and execution of the function probes (triggers), data can now be passed from the setup of the probe to the probe callers that are specific to the trace_array it is on. Although, all probes still only affect the toplevel trace array, this change will allow for instances to have their own probes separated from other instances and the top array. That is, something like the stacktrace probe can be set to trace only in an instance and not the toplevel trace array. This isn't implement yet, but this change sets the ground work for the change. When a probe callback is triggered (someone writes the probe format into set_ftrace_filter), it calls register_ftrace_function_probe() passing in init_data that will be used to initialize the probe. Then for every matching function, register_ftrace_function_probe() will call the probe_ops->init() function with the init data that was passed to it, as well as an address to a place holder that is associated with the probe and the instance. The first occurrence will have a NULL in the pointer. The init() function will then initialize it. If other probes are added, or more functions are part of the probe, the place holder will be passed to the init() function with the place holder data that it was initialized to the last time. Then this place_holder is passed to each of the other probe_ops functions, where it can be used in the function callback. When the probe_ops free() function is called, it can be called either with the rip of the function that is being removed from the probe, or zero, indicating that there are no more functions attached to the probe, and the place holder is about to be freed. This gives the probe_ops a way to free the data it assigned to the place holder if it was allocade during the first init call. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 09:39:44 +07:00
free_probe_data(edata);
}
static struct ftrace_probe_ops event_enable_probe_ops = {
.func = event_enable_probe,
.print = event_enable_print,
.init = event_enable_init,
.free = event_enable_free,
};
static struct ftrace_probe_ops event_enable_count_probe_ops = {
.func = event_enable_count_probe,
.print = event_enable_print,
.init = event_enable_init,
.free = event_enable_free,
};
static struct ftrace_probe_ops event_disable_probe_ops = {
.func = event_enable_probe,
.print = event_enable_print,
.init = event_enable_init,
.free = event_enable_free,
};
static struct ftrace_probe_ops event_disable_count_probe_ops = {
.func = event_enable_count_probe,
.print = event_enable_print,
.init = event_enable_init,
.free = event_enable_free,
};
static int
event_enable_func(struct trace_array *tr, struct ftrace_hash *hash,
char *glob, char *cmd, char *param, int enabled)
{
struct trace_event_file *file;
struct ftrace_probe_ops *ops;
struct event_probe_data *data;
const char *system;
const char *event;
char *number;
bool enable;
int ret;
if (!tr)
return -ENODEV;
/* hash funcs only work with set_ftrace_filter */
if (!enabled || !param)
return -EINVAL;
system = strsep(&param, ":");
if (!param)
return -EINVAL;
event = strsep(&param, ":");
mutex_lock(&event_mutex);
ret = -EINVAL;
file = find_event_file(tr, system, event);
if (!file)
goto out;
enable = strcmp(cmd, ENABLE_EVENT_STR) == 0;
if (enable)
ops = param ? &event_enable_count_probe_ops : &event_enable_probe_ops;
else
ops = param ? &event_disable_count_probe_ops : &event_disable_probe_ops;
if (glob[0] == '!') {
ret = unregister_ftrace_function_probe_func(glob+1, tr, ops);
goto out;
}
ret = -ENOMEM;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
goto out;
data->enable = enable;
data->count = -1;
data->file = file;
if (!param)
goto out_reg;
number = strsep(&param, ":");
ret = -EINVAL;
if (!strlen(number))
goto out_free;
/*
* We use the callback data field (which is a pointer)
* as our counter.
*/
ret = kstrtoul(number, 0, &data->count);
if (ret)
goto out_free;
out_reg:
/* Don't let event modules unload while probe registered */
ret = try_module_get(file->event_call->mod);
if (!ret) {
ret = -EBUSY;
goto out_free;
}
ret = __ftrace_event_enable_disable(file, 1, 1);
if (ret < 0)
goto out_put;
ret = register_ftrace_function_probe(glob, tr, ops, data);
/*
* The above returns on success the # of functions enabled,
* but if it didn't find any functions it returns zero.
* Consider no functions a failure too.
*/
if (!ret) {
ret = -ENOENT;
goto out_disable;
} else if (ret < 0)
goto out_disable;
/* Just return zero, not the number of enabled functions */
ret = 0;
out:
mutex_unlock(&event_mutex);
return ret;
out_disable:
__ftrace_event_enable_disable(file, 0, 1);
out_put:
module_put(file->event_call->mod);
out_free:
kfree(data);
goto out;
}
static struct ftrace_func_command event_enable_cmd = {
.name = ENABLE_EVENT_STR,
.func = event_enable_func,
};
static struct ftrace_func_command event_disable_cmd = {
.name = DISABLE_EVENT_STR,
.func = event_enable_func,
};
static __init int register_event_cmds(void)
{
int ret;
ret = register_ftrace_command(&event_enable_cmd);
if (WARN_ON(ret < 0))
return ret;
ret = register_ftrace_command(&event_disable_cmd);
if (WARN_ON(ret < 0))
unregister_ftrace_command(&event_enable_cmd);
return ret;
}
#else
static inline int register_event_cmds(void) { return 0; }
#endif /* CONFIG_DYNAMIC_FTRACE */
/*
* The top level array has already had its trace_event_file
* descriptors created in order to allow for early events to
* be recorded. This function is called after the tracefs has been
* initialized, and we now have to create the files associated
* to the events.
*/
static __init void
__trace_early_add_event_dirs(struct trace_array *tr)
{
struct trace_event_file *file;
int ret;
list_for_each_entry(file, &tr->events, list) {
ret = event_create_dir(tr->event_dir, file);
if (ret < 0)
pr_warn("Could not create directory for event %s\n",
trace_event_name(file->event_call));
}
}
/*
* For early boot up, the top trace array requires to have
* a list of events that can be enabled. This must be done before
* the filesystem is set up in order to allow events to be traced
* early.
*/
static __init void
__trace_early_add_events(struct trace_array *tr)
{
struct trace_event_call *call;
int ret;
list_for_each_entry(call, &ftrace_events, list) {
/* Early boot up should not have any modules loaded */
if (WARN_ON_ONCE(call->mod))
continue;
ret = __trace_early_add_new_event(call, tr);
if (ret < 0)
pr_warn("Could not create early event %s\n",
trace_event_name(call));
}
}
/* Remove the event directory structure for a trace directory. */
static void
__trace_remove_event_dirs(struct trace_array *tr)
{
struct trace_event_file *file, *next;
list_for_each_entry_safe(file, next, &tr->events, list)
remove_event_file_dir(file);
}
static void __add_event_to_tracers(struct trace_event_call *call)
{
struct trace_array *tr;
list_for_each_entry(tr, &ftrace_trace_arrays, list)
__trace_add_new_event(call, tr);
}
extern struct trace_event_call *__start_ftrace_events[];
extern struct trace_event_call *__stop_ftrace_events[];
static char bootup_event_buf[COMMAND_LINE_SIZE] __initdata;
static __init int setup_trace_event(char *str)
{
strlcpy(bootup_event_buf, str, COMMAND_LINE_SIZE);
ring_buffer_expanded = true;
tracing_selftest_disabled = true;
return 1;
}
__setup("trace_event=", setup_trace_event);
/* Expects to have event_mutex held when called */
static int
create_event_toplevel_files(struct dentry *parent, struct trace_array *tr)
{
struct dentry *d_events;
struct dentry *entry;
entry = tracefs_create_file("set_event", 0644, parent,
tr, &ftrace_set_event_fops);
if (!entry) {
pr_warn("Could not create tracefs 'set_event' entry\n");
return -ENOMEM;
}
d_events = tracefs_create_dir("events", parent);
if (!d_events) {
pr_warn("Could not create tracefs 'events' directory\n");
return -ENOMEM;
}
entry = trace_create_file("enable", 0644, d_events,
tr, &ftrace_tr_enable_fops);
if (!entry) {
pr_warn("Could not create tracefs 'enable' entry\n");
return -ENOMEM;
}
/* There are not as crucial, just warn if they are not created */
entry = tracefs_create_file("set_event_pid", 0644, parent,
tr, &ftrace_set_event_pid_fops);
if (!entry)
pr_warn("Could not create tracefs 'set_event_pid' entry\n");
entry = tracefs_create_file("set_event_notrace_pid", 0644, parent,
tr, &ftrace_set_event_notrace_pid_fops);
if (!entry)
pr_warn("Could not create tracefs 'set_event_notrace_pid' entry\n");
/* ring buffer internal formats */
entry = trace_create_file("header_page", 0444, d_events,
ring_buffer_print_page_header,
&ftrace_show_header_fops);
if (!entry)
pr_warn("Could not create tracefs 'header_page' entry\n");
entry = trace_create_file("header_event", 0444, d_events,
ring_buffer_print_entry_header,
&ftrace_show_header_fops);
if (!entry)
pr_warn("Could not create tracefs 'header_event' entry\n");
tr->event_dir = d_events;
return 0;
}
/**
* event_trace_add_tracer - add a instance of a trace_array to events
* @parent: The parent dentry to place the files/directories for events in
* @tr: The trace array associated with these events
*
* When a new instance is created, it needs to set up its events
* directory, as well as other files associated with events. It also
* creates the event hierachry in the @parent/events directory.
*
* Returns 0 on success.
*
* Must be called with event_mutex held.
*/
int event_trace_add_tracer(struct dentry *parent, struct trace_array *tr)
{
int ret;
lockdep_assert_held(&event_mutex);
ret = create_event_toplevel_files(parent, tr);
if (ret)
goto out;
down_write(&trace_event_sem);
__trace_add_event_dirs(tr);
up_write(&trace_event_sem);
out:
return ret;
}
/*
* The top trace array already had its file descriptors created.
* Now the files themselves need to be created.
*/
static __init int
early_event_add_tracer(struct dentry *parent, struct trace_array *tr)
{
int ret;
mutex_lock(&event_mutex);
ret = create_event_toplevel_files(parent, tr);
if (ret)
goto out_unlock;
down_write(&trace_event_sem);
__trace_early_add_event_dirs(tr);
up_write(&trace_event_sem);
out_unlock:
mutex_unlock(&event_mutex);
return ret;
}
/* Must be called with event_mutex held */
int event_trace_del_tracer(struct trace_array *tr)
{
lockdep_assert_held(&event_mutex);
tracing: Add basic event trigger framework Add a 'trigger' file for each trace event, enabling 'trace event triggers' to be set for trace events. 'trace event triggers' are patterned after the existing 'ftrace function triggers' implementation except that triggers are written to per-event 'trigger' files instead of to a single file such as the 'set_ftrace_filter' used for ftrace function triggers. The implementation is meant to be entirely separate from ftrace function triggers, in order to keep the respective implementations relatively simple and to allow them to diverge. The event trigger functionality is built on top of SOFT_DISABLE functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file flags which is checked when any trace event fires. Triggers set for a particular event need to be checked regardless of whether that event is actually enabled or not - getting an event to fire even if it's not enabled is what's already implemented by SOFT_DISABLE mode, so trigger mode directly reuses that. Event trigger essentially inherit the soft disable logic in __ftrace_event_enable_disable() while adding a bit of logic and trigger reference counting via tm_ref on top of that in a new trace_event_trigger_enable_disable() function. Because the base __ftrace_event_enable_disable() code now needs to be invoked from outside trace_events.c, a wrapper is also added for those usages. The triggers for an event are actually invoked via a new function, event_triggers_call(), and code is also added to invoke them for ftrace_raw_event calls as well as syscall events. The main part of the patch creates a new trace_events_trigger.c file to contain the trace event triggers implementation. The standard open, read, and release file operations are implemented here. The open() implementation sets up for the various open modes of the 'trigger' file. It creates and attaches the trigger iterator and sets up the command parser. If opened for reading set up the trigger seq_ops. The read() implementation parses the event trigger written to the 'trigger' file, looks up the trigger command, and passes it along to that event_command's func() implementation for command-specific processing. The release() implementation does whatever cleanup is needed to release the 'trigger' file, like releasing the parser and trigger iterator, etc. A couple of functions for event command registration and unregistration are added, along with a list to add them to and a mutex to protect them, as well as an (initially empty) registration function to add the set of commands that will be added by future commits, and call to it from the trace event initialization code. also added are a couple trigger-specific data structures needed for these implementations such as a trigger iterator and a struct for trigger-specific data. A couple structs consisting mostly of function meant to be implemented in command-specific ways, event_command and event_trigger_ops, are used by the generic event trigger command implementations. They're being put into trace.h alongside the other trace_event data structures and functions, in the expectation that they'll be needed in several trace_event-related files such as trace_events_trigger.c and trace_events.c. The event_command.func() function is meant to be called by the trigger parsing code in order to add a trigger instance to the corresponding event. It essentially coordinates adding a live trigger instance to the event, and arming the triggering the event. Every event_command func() implementation essentially does the same thing for any command: - choose ops - use the value of param to choose either a number or count version of event_trigger_ops specific to the command - do the register or unregister of those ops - associate a filter, if specified, with the triggering event The reg() and unreg() ops allow command-specific implementations for event_trigger_op registration and unregistration, and the get_trigger_ops() op allows command-specific event_trigger_ops selection to be parameterized. When a trigger instance is added, the reg() op essentially adds that trigger to the triggering event and arms it, while unreg() does the opposite. The set_filter() function is used to associate a filter with the trigger - if the command doesn't specify a set_filter() implementation, the command will ignore filters. Each command has an associated trigger_type, which serves double duty, both as a unique identifier for the command as well as a value that can be used for setting a trigger mode bit during trigger invocation. The signature of func() adds a pointer to the event_command struct, used to invoke those functions, along with a command_data param that can be passed to the reg/unreg functions. This allows func() implementations to use command-specific blobs and supports code re-use. The event_trigger_ops.func() command corrsponds to the trigger 'probe' function that gets called when the triggering event is actually invoked. The other functions are used to list the trigger when needed, along with a couple mundane book-keeping functions. This also moves event_file_data() into trace.h so it can be used outside of trace_events.c. Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Idea-by: Steve Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-24 20:59:24 +07:00
/* Disable any event triggers and associated soft-disabled events */
clear_event_triggers(tr);
/* Clear the pid list */
__ftrace_clear_event_pids(tr, TRACE_PIDS | TRACE_NO_PIDS);
/* Disable any running events */
__ftrace_set_clr_event_nolock(tr, NULL, NULL, NULL, 0);
/* Make sure no more events are being executed */
tracepoint_synchronize_unregister();
down_write(&trace_event_sem);
__trace_remove_event_dirs(tr);
tracefs_remove(tr->event_dir);
up_write(&trace_event_sem);
tr->event_dir = NULL;
return 0;
}
tracing: Use kmem_cache_alloc instead of kmalloc in trace_events.c The event structures used by the trace events are mostly persistent, but they are also allocated by kmalloc, which is not the best at allocating space for what is used. By converting these kmallocs into kmem_cache_allocs, we can save over 50K of space that is permanently allocated. After boot we have: slab name active allocated size --------- ------ --------- ---- ftrace_event_file 979 1005 56 67 1 ftrace_event_field 2301 2310 48 77 1 The ftrace_event_file has at boot up 979 active objects out of 1005 allocated in the slabs. Each object is 56 bytes. In a normal kmalloc, that would allocate 64 bytes for each object. 1005 - 979 = 26 objects not used 26 * 56 = 1456 bytes wasted But if we used kmalloc: 64 - 56 = 8 bytes unused per allocation 8 * 979 = 7832 bytes wasted 7832 - 1456 = 6376 bytes in savings Doing the same for ftrace_event_field where there's 2301 objects allocated in a slab that can hold 2310 with 48 bytes each we have: 2310 - 2301 = 9 objects not used 9 * 48 = 432 bytes wasted A kmalloc would also use 64 bytes per object: 64 - 48 = 16 bytes unused per allocation 16 * 2301 = 36816 bytes wasted! 36816 - 432 = 36384 bytes in savings This change gives us a total of 42760 bytes in savings. At least on my machine, but as there's a lot of these persistent objects for all configurations that use trace points, this is a net win. Thanks to Ezequiel Garcia for his trace_analyze presentation which pointed out the wasted space in my code. Cc: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-28 08:23:57 +07:00
static __init int event_trace_memsetup(void)
{
field_cachep = KMEM_CACHE(ftrace_event_field, SLAB_PANIC);
file_cachep = KMEM_CACHE(trace_event_file, SLAB_PANIC);
tracing: Use kmem_cache_alloc instead of kmalloc in trace_events.c The event structures used by the trace events are mostly persistent, but they are also allocated by kmalloc, which is not the best at allocating space for what is used. By converting these kmallocs into kmem_cache_allocs, we can save over 50K of space that is permanently allocated. After boot we have: slab name active allocated size --------- ------ --------- ---- ftrace_event_file 979 1005 56 67 1 ftrace_event_field 2301 2310 48 77 1 The ftrace_event_file has at boot up 979 active objects out of 1005 allocated in the slabs. Each object is 56 bytes. In a normal kmalloc, that would allocate 64 bytes for each object. 1005 - 979 = 26 objects not used 26 * 56 = 1456 bytes wasted But if we used kmalloc: 64 - 56 = 8 bytes unused per allocation 8 * 979 = 7832 bytes wasted 7832 - 1456 = 6376 bytes in savings Doing the same for ftrace_event_field where there's 2301 objects allocated in a slab that can hold 2310 with 48 bytes each we have: 2310 - 2301 = 9 objects not used 9 * 48 = 432 bytes wasted A kmalloc would also use 64 bytes per object: 64 - 48 = 16 bytes unused per allocation 16 * 2301 = 36816 bytes wasted! 36816 - 432 = 36384 bytes in savings This change gives us a total of 42760 bytes in savings. At least on my machine, but as there's a lot of these persistent objects for all configurations that use trace points, this is a net win. Thanks to Ezequiel Garcia for his trace_analyze presentation which pointed out the wasted space in my code. Cc: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-28 08:23:57 +07:00
return 0;
}
static __init void
early_enable_events(struct trace_array *tr, bool disable_first)
{
char *buf = bootup_event_buf;
char *token;
int ret;
while (true) {
token = strsep(&buf, ",");
if (!token)
break;
if (*token) {
/* Restarting syscalls requires that we stop them first */
if (disable_first)
ftrace_set_clr_event(tr, token, 0);
ret = ftrace_set_clr_event(tr, token, 1);
if (ret)
pr_warn("Failed to enable trace event: %s\n", token);
}
/* Put back the comma to allow this to be called again */
if (buf)
*(buf - 1) = ',';
}
}
static __init int event_trace_enable(void)
{
struct trace_array *tr = top_trace_array();
struct trace_event_call **iter, *call;
int ret;
if (!tr)
return -ENODEV;
for_each_event(iter, __start_ftrace_events, __stop_ftrace_events) {
call = *iter;
ret = event_init(call);
if (!ret)
list_add(&call->list, &ftrace_events);
}
/*
* We need the top trace array to have a working set of trace
* points at early init, before the debug files and directories
* are created. Create the file entries now, and attach them
* to the actual file dentries later.
*/
__trace_early_add_events(tr);
early_enable_events(tr, false);
trace_printk_start_comm();
register_event_cmds();
tracing: Add basic event trigger framework Add a 'trigger' file for each trace event, enabling 'trace event triggers' to be set for trace events. 'trace event triggers' are patterned after the existing 'ftrace function triggers' implementation except that triggers are written to per-event 'trigger' files instead of to a single file such as the 'set_ftrace_filter' used for ftrace function triggers. The implementation is meant to be entirely separate from ftrace function triggers, in order to keep the respective implementations relatively simple and to allow them to diverge. The event trigger functionality is built on top of SOFT_DISABLE functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file flags which is checked when any trace event fires. Triggers set for a particular event need to be checked regardless of whether that event is actually enabled or not - getting an event to fire even if it's not enabled is what's already implemented by SOFT_DISABLE mode, so trigger mode directly reuses that. Event trigger essentially inherit the soft disable logic in __ftrace_event_enable_disable() while adding a bit of logic and trigger reference counting via tm_ref on top of that in a new trace_event_trigger_enable_disable() function. Because the base __ftrace_event_enable_disable() code now needs to be invoked from outside trace_events.c, a wrapper is also added for those usages. The triggers for an event are actually invoked via a new function, event_triggers_call(), and code is also added to invoke them for ftrace_raw_event calls as well as syscall events. The main part of the patch creates a new trace_events_trigger.c file to contain the trace event triggers implementation. The standard open, read, and release file operations are implemented here. The open() implementation sets up for the various open modes of the 'trigger' file. It creates and attaches the trigger iterator and sets up the command parser. If opened for reading set up the trigger seq_ops. The read() implementation parses the event trigger written to the 'trigger' file, looks up the trigger command, and passes it along to that event_command's func() implementation for command-specific processing. The release() implementation does whatever cleanup is needed to release the 'trigger' file, like releasing the parser and trigger iterator, etc. A couple of functions for event command registration and unregistration are added, along with a list to add them to and a mutex to protect them, as well as an (initially empty) registration function to add the set of commands that will be added by future commits, and call to it from the trace event initialization code. also added are a couple trigger-specific data structures needed for these implementations such as a trigger iterator and a struct for trigger-specific data. A couple structs consisting mostly of function meant to be implemented in command-specific ways, event_command and event_trigger_ops, are used by the generic event trigger command implementations. They're being put into trace.h alongside the other trace_event data structures and functions, in the expectation that they'll be needed in several trace_event-related files such as trace_events_trigger.c and trace_events.c. The event_command.func() function is meant to be called by the trigger parsing code in order to add a trigger instance to the corresponding event. It essentially coordinates adding a live trigger instance to the event, and arming the triggering the event. Every event_command func() implementation essentially does the same thing for any command: - choose ops - use the value of param to choose either a number or count version of event_trigger_ops specific to the command - do the register or unregister of those ops - associate a filter, if specified, with the triggering event The reg() and unreg() ops allow command-specific implementations for event_trigger_op registration and unregistration, and the get_trigger_ops() op allows command-specific event_trigger_ops selection to be parameterized. When a trigger instance is added, the reg() op essentially adds that trigger to the triggering event and arms it, while unreg() does the opposite. The set_filter() function is used to associate a filter with the trigger - if the command doesn't specify a set_filter() implementation, the command will ignore filters. Each command has an associated trigger_type, which serves double duty, both as a unique identifier for the command as well as a value that can be used for setting a trigger mode bit during trigger invocation. The signature of func() adds a pointer to the event_command struct, used to invoke those functions, along with a command_data param that can be passed to the reg/unreg functions. This allows func() implementations to use command-specific blobs and supports code re-use. The event_trigger_ops.func() command corrsponds to the trigger 'probe' function that gets called when the triggering event is actually invoked. The other functions are used to list the trigger when needed, along with a couple mundane book-keeping functions. This also moves event_file_data() into trace.h so it can be used outside of trace_events.c. Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Idea-by: Steve Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-24 20:59:24 +07:00
register_trigger_cmds();
return 0;
}
/*
* event_trace_enable() is called from trace_event_init() first to
* initialize events and perhaps start any events that are on the
* command line. Unfortunately, there are some events that will not
* start this early, like the system call tracepoints that need
* to set the TIF_SYSCALL_TRACEPOINT flag of pid 1. But event_trace_enable()
* is called before pid 1 starts, and this flag is never set, making
* the syscall tracepoint never get reached, but the event is enabled
* regardless (and not doing anything).
*/
static __init int event_trace_enable_again(void)
{
struct trace_array *tr;
tr = top_trace_array();
if (!tr)
return -ENODEV;
early_enable_events(tr, true);
return 0;
}
early_initcall(event_trace_enable_again);
__init int event_trace_init(void)
{
struct trace_array *tr;
struct dentry *d_tracer;
struct dentry *entry;
int ret;
tr = top_trace_array();
if (!tr)
return -ENODEV;
d_tracer = tracing_init_dentry();
if (IS_ERR(d_tracer))
return 0;
entry = tracefs_create_file("available_events", 0444, d_tracer,
tr, &ftrace_avail_fops);
if (!entry)
pr_warn("Could not create tracefs 'available_events' entry\n");
if (trace_define_generic_fields())
pr_warn("tracing: Failed to allocated generic fields");
if (trace_define_common_fields())
pr_warn("tracing: Failed to allocate common fields");
ret = early_event_add_tracer(d_tracer, tr);
if (ret)
return ret;
#ifdef CONFIG_MODULES
ret = register_module_notifier(&trace_module_nb);
if (ret)
pr_warn("Failed to register trace events module notifier\n");
#endif
return 0;
}
void __init trace_event_init(void)
{
event_trace_memsetup();
init_ftrace_syscalls();
event_trace_enable();
}
#ifdef CONFIG_EVENT_TRACE_STARTUP_TEST
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
static DEFINE_SPINLOCK(test_spinlock);
static DEFINE_SPINLOCK(test_spinlock_irq);
static DEFINE_MUTEX(test_mutex);
static __init void test_work(struct work_struct *dummy)
{
spin_lock(&test_spinlock);
spin_lock_irq(&test_spinlock_irq);
udelay(1);
spin_unlock_irq(&test_spinlock_irq);
spin_unlock(&test_spinlock);
mutex_lock(&test_mutex);
msleep(1);
mutex_unlock(&test_mutex);
}
static __init int event_test_thread(void *unused)
{
void *test_malloc;
test_malloc = kmalloc(1234, GFP_KERNEL);
if (!test_malloc)
pr_info("failed to kmalloc\n");
schedule_on_each_cpu(test_work);
kfree(test_malloc);
set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop()) {
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
schedule();
set_current_state(TASK_INTERRUPTIBLE);
}
__set_current_state(TASK_RUNNING);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
return 0;
}
/*
* Do various things that may trigger events.
*/
static __init void event_test_stuff(void)
{
struct task_struct *test_thread;
test_thread = kthread_run(event_test_thread, NULL, "test-events");
msleep(1);
kthread_stop(test_thread);
}
/*
* For every trace event defined, we will test each trace point separately,
* and then by groups, and finally all trace points.
*/
static __init void event_trace_self_tests(void)
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
{
struct trace_subsystem_dir *dir;
struct trace_event_file *file;
struct trace_event_call *call;
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
struct event_subsystem *system;
struct trace_array *tr;
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
int ret;
tr = top_trace_array();
if (!tr)
return;
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
pr_info("Running tests on trace events:\n");
list_for_each_entry(file, &tr->events, list) {
call = file->event_call;
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
tracing: Remove per event trace registering This patch removes the register functions of TRACE_EVENT() to enable and disable tracepoints. The registering of a event is now down directly in the trace_events.c file. The tracepoint_probe_register() is now called directly. The prototypes are no longer type checked, but this should not be an issue since the tracepoints are created automatically by the macros. If a prototype is incorrect in the TRACE_EVENT() macro, then other macros will catch it. The trace_event_class structure now holds the probes to be called by the callbacks. This removes needing to have each event have a separate pointer for the probe. To handle kprobes and syscalls, since they register probes in a different manner, a "reg" field is added to the ftrace_event_class structure. If the "reg" field is assigned, then it will be called for enabling and disabling of the probe for either ftrace or perf. To let the reg function know what is happening, a new enum (trace_reg) is created that has the type of control that is needed. With this new rework, the 82 kernel events and 618 syscall events has their footprint dramatically lowered: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint 4900252 1057412 861512 6819176 680d68 vmlinux.regs The size went from 6863829 to 6819176, that's a total of 44K in savings. With tracepoints being continuously added, this is critical that the footprint becomes minimal. v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf specific structure in trace_events.c. v4: Fixed trace self tests to check probe because regfunc no longer exists. v3: Updated to handle void *data in beginning of probe parameters. Also added the tracepoint: check_trace_callback_type_##call(). v2: Changed the callback probes to pass void * and typecast the value within the function. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 23:27:06 +07:00
/* Only test those that have a probe */
if (!call->class || !call->class->probe)
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
continue;
/*
* Testing syscall events here is pretty useless, but
* we still do it if configured. But this is time consuming.
* What we really need is a user thread to perform the
* syscalls as we test.
*/
#ifndef CONFIG_EVENT_TRACE_TEST_SYSCALLS
if (call->class->system &&
strcmp(call->class->system, "syscalls") == 0)
continue;
#endif
pr_info("Testing event %s: ", trace_event_name(call));
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
/*
* If an event is already enabled, someone is using
* it and the self test should not be on.
*/
if (file->flags & EVENT_FILE_FL_ENABLED) {
pr_warn("Enabled event during self test!\n");
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
WARN_ON_ONCE(1);
continue;
}
ftrace_event_enable_disable(file, 1);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
event_test_stuff();
ftrace_event_enable_disable(file, 0);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
pr_cont("OK\n");
}
/* Now test at the sub system level */
pr_info("Running tests on trace event systems:\n");
list_for_each_entry(dir, &tr->systems, list) {
system = dir->subsystem;
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
/* the ftrace system is special, skip it */
if (strcmp(system->name, "ftrace") == 0)
continue;
pr_info("Testing event system %s: ", system->name);
ret = __ftrace_set_clr_event(tr, NULL, system->name, NULL, 1);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
if (WARN_ON_ONCE(ret)) {
pr_warn("error enabling system %s\n",
system->name);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
continue;
}
event_test_stuff();
ret = __ftrace_set_clr_event(tr, NULL, system->name, NULL, 0);
if (WARN_ON_ONCE(ret)) {
pr_warn("error disabling system %s\n",
system->name);
continue;
}
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
pr_cont("OK\n");
}
/* Test with all events enabled */
pr_info("Running tests on all trace events:\n");
pr_info("Testing all events: ");
ret = __ftrace_set_clr_event(tr, NULL, NULL, NULL, 1);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
if (WARN_ON_ONCE(ret)) {
pr_warn("error enabling all events\n");
return;
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
}
event_test_stuff();
/* reset sysname */
ret = __ftrace_set_clr_event(tr, NULL, NULL, NULL, 0);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
if (WARN_ON_ONCE(ret)) {
pr_warn("error disabling all events\n");
return;
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
}
pr_cont("OK\n");
}
#ifdef CONFIG_FUNCTION_TRACER
static DEFINE_PER_CPU(atomic_t, ftrace_test_event_disable);
static struct trace_event_file event_trace_file __initdata;
static void __init
function_test_events_call(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct pt_regs *pt_regs)
{
struct trace_buffer *buffer;
struct ring_buffer_event *event;
struct ftrace_entry *entry;
unsigned long flags;
long disabled;
int cpu;
int pc;
pc = preempt_count();
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 20:36:50 +07:00
preempt_disable_notrace();
cpu = raw_smp_processor_id();
disabled = atomic_inc_return(&per_cpu(ftrace_test_event_disable, cpu));
if (disabled != 1)
goto out;
local_save_flags(flags);
event = trace_event_buffer_lock_reserve(&buffer, &event_trace_file,
TRACE_FN, sizeof(*entry),
flags, pc);
if (!event)
goto out;
entry = ring_buffer_event_data(event);
entry->ip = ip;
entry->parent_ip = parent_ip;
event_trigger_unlock_commit(&event_trace_file, buffer, event,
entry, flags, pc);
out:
atomic_dec(&per_cpu(ftrace_test_event_disable, cpu));
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 20:36:50 +07:00
preempt_enable_notrace();
}
static struct ftrace_ops trace_ops __initdata =
{
.func = function_test_events_call,
.flags = FTRACE_OPS_FL_RECURSION_SAFE,
};
static __init void event_trace_self_test_with_function(void)
{
int ret;
event_trace_file.tr = top_trace_array();
if (WARN_ON(!event_trace_file.tr))
return;
ret = register_ftrace_function(&trace_ops);
if (WARN_ON(ret < 0)) {
pr_info("Failed to enable function tracer for event tests\n");
return;
}
pr_info("Running tests again, along with the function tracer\n");
event_trace_self_tests();
unregister_ftrace_function(&trace_ops);
}
#else
static __init void event_trace_self_test_with_function(void)
{
}
#endif
static __init int event_trace_self_tests_init(void)
{
if (!tracing_selftest_disabled) {
event_trace_self_tests();
event_trace_self_test_with_function();
}
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
return 0;
}
late_initcall(event_trace_self_tests_init);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:36:40 +07:00
#endif