linux_dsm_epyc7002/drivers/net/wireless/ath/ath6kl/htc.c

2461 lines
61 KiB
C
Raw Normal View History

Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/*
* Copyright (c) 2007-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "core.h"
#include "htc_hif.h"
#include "debug.h"
#include "hif-ops.h"
#include <asm/unaligned.h>
#define CALC_TXRX_PADDED_LEN(dev, len) (__ALIGN_MASK((len), (dev)->block_mask))
static void htc_prep_send_pkt(struct htc_packet *packet, u8 flags, int ctrl0,
int ctrl1)
{
struct htc_frame_hdr *hdr;
packet->buf -= HTC_HDR_LENGTH;
hdr = (struct htc_frame_hdr *)packet->buf;
/* Endianess? */
put_unaligned((u16)packet->act_len, &hdr->payld_len);
hdr->flags = flags;
hdr->eid = packet->endpoint;
hdr->ctrl[0] = ctrl0;
hdr->ctrl[1] = ctrl1;
}
static void htc_reclaim_txctrl_buf(struct htc_target *target,
struct htc_packet *pkt)
{
spin_lock_bh(&target->htc_lock);
list_add_tail(&pkt->list, &target->free_ctrl_txbuf);
spin_unlock_bh(&target->htc_lock);
}
static struct htc_packet *htc_get_control_buf(struct htc_target *target,
bool tx)
{
struct htc_packet *packet = NULL;
struct list_head *buf_list;
buf_list = tx ? &target->free_ctrl_txbuf : &target->free_ctrl_rxbuf;
spin_lock_bh(&target->htc_lock);
if (list_empty(buf_list)) {
spin_unlock_bh(&target->htc_lock);
return NULL;
}
packet = list_first_entry(buf_list, struct htc_packet, list);
list_del(&packet->list);
spin_unlock_bh(&target->htc_lock);
if (tx)
packet->buf = packet->buf_start + HTC_HDR_LENGTH;
return packet;
}
static void htc_tx_comp_update(struct htc_target *target,
struct htc_endpoint *endpoint,
struct htc_packet *packet)
{
packet->completion = NULL;
packet->buf += HTC_HDR_LENGTH;
if (!packet->status)
return;
ath6kl_err("req failed (status:%d, ep:%d, len:%d creds:%d)\n",
packet->status, packet->endpoint, packet->act_len,
packet->info.tx.cred_used);
/* on failure to submit, reclaim credits for this packet */
spin_lock_bh(&target->tx_lock);
endpoint->cred_dist.cred_to_dist +=
packet->info.tx.cred_used;
endpoint->cred_dist.txq_depth = get_queue_depth(&endpoint->txq);
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "ctxt:0x%p dist:0x%p\n",
target->cred_dist_cntxt, &target->cred_dist_list);
ath6k_credit_distribute(target->cred_dist_cntxt,
&target->cred_dist_list,
HTC_CREDIT_DIST_SEND_COMPLETE);
spin_unlock_bh(&target->tx_lock);
}
static void htc_tx_complete(struct htc_endpoint *endpoint,
struct list_head *txq)
{
if (list_empty(txq))
return;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"send complete ep %d, (%d pkts)\n",
endpoint->eid, get_queue_depth(txq));
ath6kl_tx_complete(endpoint->target->dev->ar, txq);
}
static void htc_tx_comp_handler(struct htc_target *target,
struct htc_packet *packet)
{
struct htc_endpoint *endpoint = &target->endpoint[packet->endpoint];
struct list_head container;
htc_tx_comp_update(target, endpoint, packet);
INIT_LIST_HEAD(&container);
list_add_tail(&packet->list, &container);
/* do completion */
htc_tx_complete(endpoint, &container);
}
static void htc_async_tx_scat_complete(struct htc_target *target,
struct hif_scatter_req *scat_req)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
{
struct htc_endpoint *endpoint;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
struct htc_packet *packet;
struct list_head tx_compq;
int i;
INIT_LIST_HEAD(&tx_compq);
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"htc_async_tx_scat_complete total len: %d entries: %d\n",
scat_req->len, scat_req->scat_entries);
if (scat_req->status)
ath6kl_err("send scatter req failed: %d\n", scat_req->status);
packet = scat_req->scat_list[0].packet;
endpoint = &target->endpoint[packet->endpoint];
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/* walk through the scatter list and process */
for (i = 0; i < scat_req->scat_entries; i++) {
packet = scat_req->scat_list[i].packet;
if (!packet) {
WARN_ON(1);
return;
}
packet->status = scat_req->status;
htc_tx_comp_update(target, endpoint, packet);
list_add_tail(&packet->list, &tx_compq);
}
/* free scatter request */
hif_scatter_req_add(target->dev->ar, scat_req);
/* complete all packets */
htc_tx_complete(endpoint, &tx_compq);
}
static int htc_issue_send(struct htc_target *target, struct htc_packet *packet)
{
int status;
bool sync = false;
u32 padded_len, send_len;
if (!packet->completion)
sync = true;
send_len = packet->act_len + HTC_HDR_LENGTH;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "%s: transmit len : %d (%s)\n",
__func__, send_len, sync ? "sync" : "async");
padded_len = CALC_TXRX_PADDED_LEN(target->dev, send_len);
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"DevSendPacket, padded len: %d mbox:0x%X (mode:%s)\n",
padded_len,
target->dev->ar->mbox_info.htc_addr,
sync ? "sync" : "async");
if (sync) {
status = hif_read_write_sync(target->dev->ar,
target->dev->ar->mbox_info.htc_addr,
packet->buf, padded_len,
HIF_WR_SYNC_BLOCK_INC);
packet->status = status;
packet->buf += HTC_HDR_LENGTH;
} else
status = hif_write_async(target->dev->ar,
target->dev->ar->mbox_info.htc_addr,
packet->buf, padded_len,
HIF_WR_ASYNC_BLOCK_INC, packet);
return status;
}
static int htc_check_credits(struct htc_target *target,
struct htc_endpoint *ep, u8 *flags,
enum htc_endpoint_id eid, unsigned int len,
int *req_cred)
{
*req_cred = (len > target->tgt_cred_sz) ?
DIV_ROUND_UP(len, target->tgt_cred_sz) : 1;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "creds required:%d got:%d\n",
*req_cred, ep->cred_dist.credits);
if (ep->cred_dist.credits < *req_cred) {
if (eid == ENDPOINT_0)
return -EINVAL;
/* Seek more credits */
ep->cred_dist.seek_cred = *req_cred - ep->cred_dist.credits;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "ctxt:0x%p dist:0x%p\n",
target->cred_dist_cntxt, &ep->cred_dist);
ath6k_seek_credits(target->cred_dist_cntxt, &ep->cred_dist);
ep->cred_dist.seek_cred = 0;
if (ep->cred_dist.credits < *req_cred) {
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"not enough credits for ep %d - leaving packet in queue\n",
eid);
return -EINVAL;
}
}
ep->cred_dist.credits -= *req_cred;
ep->ep_st.cred_cosumd += *req_cred;
/* When we are getting low on credits, ask for more */
if (ep->cred_dist.credits < ep->cred_dist.cred_per_msg) {
ep->cred_dist.seek_cred =
ep->cred_dist.cred_per_msg - ep->cred_dist.credits;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "ctxt:0x%p dist:0x%p\n",
target->cred_dist_cntxt, &ep->cred_dist);
ath6k_seek_credits(target->cred_dist_cntxt, &ep->cred_dist);
/* see if we were successful in getting more */
if (ep->cred_dist.credits < ep->cred_dist.cred_per_msg) {
/* tell the target we need credits ASAP! */
*flags |= HTC_FLAGS_NEED_CREDIT_UPDATE;
ep->ep_st.cred_low_indicate += 1;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "host needs credits\n");
}
}
return 0;
}
static void htc_tx_pkts_get(struct htc_target *target,
struct htc_endpoint *endpoint,
struct list_head *queue)
{
int req_cred;
u8 flags;
struct htc_packet *packet;
unsigned int len;
while (true) {
flags = 0;
if (list_empty(&endpoint->txq))
break;
packet = list_first_entry(&endpoint->txq, struct htc_packet,
list);
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"got head pkt:0x%p , queue depth: %d\n",
packet, get_queue_depth(&endpoint->txq));
len = CALC_TXRX_PADDED_LEN(target->dev,
packet->act_len + HTC_HDR_LENGTH);
if (htc_check_credits(target, endpoint, &flags,
packet->endpoint, len, &req_cred))
break;
/* now we can fully move onto caller's queue */
packet = list_first_entry(&endpoint->txq, struct htc_packet,
list);
list_move_tail(&packet->list, queue);
/* save the number of credits this packet consumed */
packet->info.tx.cred_used = req_cred;
/* all TX packets are handled asynchronously */
packet->completion = htc_tx_comp_handler;
packet->context = target;
endpoint->ep_st.tx_issued += 1;
/* save send flags */
packet->info.tx.flags = flags;
packet->info.tx.seqno = endpoint->seqno;
endpoint->seqno++;
}
}
/* See if the padded tx length falls on a credit boundary */
static int htc_get_credit_padding(unsigned int cred_sz, int *len,
struct htc_endpoint *ep)
{
int rem_cred, cred_pad;
rem_cred = *len % cred_sz;
/* No padding needed */
if (!rem_cred)
return 0;
if (!(ep->conn_flags & HTC_FLGS_TX_BNDL_PAD_EN))
return -1;
/*
* The transfer consumes a "partial" credit, this
* packet cannot be bundled unless we add
* additional "dummy" padding (max 255 bytes) to
* consume the entire credit.
*/
cred_pad = *len < cred_sz ? (cred_sz - *len) : rem_cred;
if ((cred_pad > 0) && (cred_pad <= 255))
*len += cred_pad;
else
/* The amount of padding is too large, send as non-bundled */
return -1;
return cred_pad;
}
static int htc_setup_send_scat_list(struct htc_target *target,
struct htc_endpoint *endpoint,
struct hif_scatter_req *scat_req,
int n_scat,
struct list_head *queue)
{
struct htc_packet *packet;
int i, len, rem_scat, cred_pad;
int status = 0;
rem_scat = target->max_tx_bndl_sz;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
for (i = 0; i < n_scat; i++) {
scat_req->scat_list[i].packet = NULL;
if (list_empty(queue))
break;
packet = list_first_entry(queue, struct htc_packet, list);
len = CALC_TXRX_PADDED_LEN(target->dev,
packet->act_len + HTC_HDR_LENGTH);
cred_pad = htc_get_credit_padding(target->tgt_cred_sz,
&len, endpoint);
if (cred_pad < 0) {
status = -EINVAL;
break;
}
if (rem_scat < len) {
/* exceeds what we can transfer */
status = -ENOSPC;
break;
}
rem_scat -= len;
/* now remove it from the queue */
packet = list_first_entry(queue, struct htc_packet, list);
list_del(&packet->list);
scat_req->scat_list[i].packet = packet;
/* prepare packet and flag message as part of a send bundle */
htc_prep_send_pkt(packet,
packet->info.tx.flags | HTC_FLAGS_SEND_BUNDLE,
cred_pad, packet->info.tx.seqno);
scat_req->scat_list[i].buf = packet->buf;
scat_req->scat_list[i].len = len;
scat_req->len += len;
scat_req->scat_entries++;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"%d, adding pkt : 0x%p len:%d (remaining space:%d)\n",
i, packet, len, rem_scat);
}
/* Roll back scatter setup in case of any failure */
if (status || (scat_req->scat_entries < HTC_MIN_HTC_MSGS_TO_BUNDLE)) {
for (i = scat_req->scat_entries - 1; i >= 0; i--) {
packet = scat_req->scat_list[i].packet;
if (packet) {
packet->buf += HTC_HDR_LENGTH;
list_add(&packet->list, queue);
}
}
return -EINVAL;
}
return 0;
}
/*
* htc_issue_send_bundle: drain a queue and send as bundles
* this function may return without fully draining the queue
* when
*
* 1. scatter resources are exhausted
* 2. a message that will consume a partial credit will stop the
* bundling process early
* 3. we drop below the minimum number of messages for a bundle
*/
static void htc_issue_send_bundle(struct htc_endpoint *endpoint,
struct list_head *queue,
int *sent_bundle, int *n_bundle_pkts)
{
struct htc_target *target = endpoint->target;
struct hif_scatter_req *scat_req = NULL;
struct hif_dev_scat_sup_info hif_info;
int n_scat, n_sent_bundle = 0, tot_pkts_bundle = 0;
hif_info = target->dev->hif_scat_info;
while (true) {
n_scat = get_queue_depth(queue);
n_scat = min(n_scat, target->msg_per_bndl_max);
if (n_scat < HTC_MIN_HTC_MSGS_TO_BUNDLE)
/* not enough to bundle */
break;
scat_req = hif_scatter_req_get(target->dev->ar);
if (!scat_req) {
/* no scatter resources */
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"no more scatter resources\n");
break;
}
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "pkts to scatter: %d\n",
n_scat);
scat_req->len = 0;
scat_req->scat_entries = 0;
if (htc_setup_send_scat_list(target, endpoint, scat_req,
n_scat, queue)) {
hif_scatter_req_add(target->dev->ar, scat_req);
break;
}
/* send path is always asynchronous */
scat_req->complete = htc_async_tx_scat_complete;
n_sent_bundle++;
tot_pkts_bundle += scat_req->scat_entries;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"send scatter total bytes: %d , entries: %d\n",
scat_req->len, scat_req->scat_entries);
ath6kldev_submit_scat_req(target->dev, scat_req, false);
}
*sent_bundle = n_sent_bundle;
*n_bundle_pkts = tot_pkts_bundle;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "htc_issue_send_bundle (sent:%d)\n",
n_sent_bundle);
return;
}
static void htc_tx_from_ep_txq(struct htc_target *target,
struct htc_endpoint *endpoint)
{
struct list_head txq;
struct htc_packet *packet;
int bundle_sent;
int n_pkts_bundle;
spin_lock_bh(&target->tx_lock);
endpoint->tx_proc_cnt++;
if (endpoint->tx_proc_cnt > 1) {
endpoint->tx_proc_cnt--;
spin_unlock_bh(&target->tx_lock);
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "htc_try_send (busy)\n");
return;
}
/*
* drain the endpoint TX queue for transmission as long
* as we have enough credits.
*/
INIT_LIST_HEAD(&txq);
while (true) {
if (list_empty(&endpoint->txq))
break;
htc_tx_pkts_get(target, endpoint, &txq);
if (list_empty(&txq))
break;
spin_unlock_bh(&target->tx_lock);
bundle_sent = 0;
n_pkts_bundle = 0;
while (true) {
/* try to send a bundle on each pass */
if ((target->tx_bndl_enable) &&
(get_queue_depth(&txq) >=
HTC_MIN_HTC_MSGS_TO_BUNDLE)) {
int temp1 = 0, temp2 = 0;
htc_issue_send_bundle(endpoint, &txq,
&temp1, &temp2);
bundle_sent += temp1;
n_pkts_bundle += temp2;
}
if (list_empty(&txq))
break;
packet = list_first_entry(&txq, struct htc_packet,
list);
list_del(&packet->list);
htc_prep_send_pkt(packet, packet->info.tx.flags,
0, packet->info.tx.seqno);
htc_issue_send(target, packet);
}
spin_lock_bh(&target->tx_lock);
endpoint->ep_st.tx_bundles += bundle_sent;
endpoint->ep_st.tx_pkt_bundled += n_pkts_bundle;
}
endpoint->tx_proc_cnt = 0;
spin_unlock_bh(&target->tx_lock);
}
static bool htc_try_send(struct htc_target *target,
struct htc_endpoint *endpoint,
struct htc_packet *tx_pkt)
{
struct htc_ep_callbacks ep_cb;
int txq_depth;
bool overflow = false;
ep_cb = endpoint->ep_cb;
spin_lock_bh(&target->tx_lock);
txq_depth = get_queue_depth(&endpoint->txq);
spin_unlock_bh(&target->tx_lock);
if (txq_depth >= endpoint->max_txq_depth)
overflow = true;
if (overflow)
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"ep %d, tx queue will overflow :%d , tx depth:%d, max:%d\n",
endpoint->eid, overflow, txq_depth,
endpoint->max_txq_depth);
if (overflow && ep_cb.tx_full) {
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"indicating overflowed tx packet: 0x%p\n", tx_pkt);
if (ep_cb.tx_full(endpoint->target, tx_pkt) ==
HTC_SEND_FULL_DROP) {
endpoint->ep_st.tx_dropped += 1;
return false;
}
}
spin_lock_bh(&target->tx_lock);
list_add_tail(&tx_pkt->list, &endpoint->txq);
spin_unlock_bh(&target->tx_lock);
htc_tx_from_ep_txq(target, endpoint);
return true;
}
static void htc_chk_ep_txq(struct htc_target *target)
{
struct htc_endpoint *endpoint;
struct htc_endpoint_credit_dist *cred_dist;
/*
* Run through the credit distribution list to see if there are
* packets queued. NOTE: no locks need to be taken since the
* distribution list is not dynamic (cannot be re-ordered) and we
* are not modifying any state.
*/
list_for_each_entry(cred_dist, &target->cred_dist_list, list) {
endpoint = (struct htc_endpoint *)cred_dist->htc_rsvd;
spin_lock_bh(&target->tx_lock);
if (!list_empty(&endpoint->txq)) {
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"ep %d has %d credits and %d packets in tx queue\n",
cred_dist->endpoint,
endpoint->cred_dist.credits,
get_queue_depth(&endpoint->txq));
spin_unlock_bh(&target->tx_lock);
/*
* Try to start the stalled queue, this list is
* ordered by priority. If there are credits
* available the highest priority queue will get a
* chance to reclaim credits from lower priority
* ones.
*/
htc_tx_from_ep_txq(target, endpoint);
spin_lock_bh(&target->tx_lock);
}
spin_unlock_bh(&target->tx_lock);
}
}
static int htc_setup_tx_complete(struct htc_target *target)
{
struct htc_packet *send_pkt = NULL;
int status;
send_pkt = htc_get_control_buf(target, true);
if (!send_pkt)
return -ENOMEM;
if (target->htc_tgt_ver >= HTC_VERSION_2P1) {
struct htc_setup_comp_ext_msg *setup_comp_ext;
u32 flags = 0;
setup_comp_ext =
(struct htc_setup_comp_ext_msg *)send_pkt->buf;
memset(setup_comp_ext, 0, sizeof(*setup_comp_ext));
setup_comp_ext->msg_id =
cpu_to_le16(HTC_MSG_SETUP_COMPLETE_EX_ID);
if (target->msg_per_bndl_max > 0) {
/* Indicate HTC bundling to the target */
flags |= HTC_SETUP_COMP_FLG_RX_BNDL_EN;
setup_comp_ext->msg_per_rxbndl =
target->msg_per_bndl_max;
}
memcpy(&setup_comp_ext->flags, &flags,
sizeof(setup_comp_ext->flags));
set_htc_pkt_info(send_pkt, NULL, (u8 *) setup_comp_ext,
sizeof(struct htc_setup_comp_ext_msg),
ENDPOINT_0, HTC_SERVICE_TX_PACKET_TAG);
} else {
struct htc_setup_comp_msg *setup_comp;
setup_comp = (struct htc_setup_comp_msg *)send_pkt->buf;
memset(setup_comp, 0, sizeof(struct htc_setup_comp_msg));
setup_comp->msg_id = cpu_to_le16(HTC_MSG_SETUP_COMPLETE_ID);
set_htc_pkt_info(send_pkt, NULL, (u8 *) setup_comp,
sizeof(struct htc_setup_comp_msg),
ENDPOINT_0, HTC_SERVICE_TX_PACKET_TAG);
}
/* we want synchronous operation */
send_pkt->completion = NULL;
htc_prep_send_pkt(send_pkt, 0, 0, 0);
status = htc_issue_send(target, send_pkt);
if (send_pkt != NULL)
htc_reclaim_txctrl_buf(target, send_pkt);
return status;
}
void htc_set_credit_dist(struct htc_target *target,
struct htc_credit_state_info *cred_dist_cntxt,
u16 srvc_pri_order[], int list_len)
{
struct htc_endpoint *endpoint;
int i, ep;
target->cred_dist_cntxt = cred_dist_cntxt;
list_add_tail(&target->endpoint[ENDPOINT_0].cred_dist.list,
&target->cred_dist_list);
for (i = 0; i < list_len; i++) {
for (ep = ENDPOINT_1; ep < ENDPOINT_MAX; ep++) {
endpoint = &target->endpoint[ep];
if (endpoint->svc_id == srvc_pri_order[i]) {
list_add_tail(&endpoint->cred_dist.list,
&target->cred_dist_list);
break;
}
}
if (ep >= ENDPOINT_MAX) {
WARN_ON(1);
return;
}
}
}
int htc_tx(struct htc_target *target, struct htc_packet *packet)
{
struct htc_endpoint *endpoint;
struct list_head queue;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"htc_tx: ep id: %d, buf: 0x%p, len: %d\n",
packet->endpoint, packet->buf, packet->act_len);
if (packet->endpoint >= ENDPOINT_MAX) {
WARN_ON(1);
return -EINVAL;
}
endpoint = &target->endpoint[packet->endpoint];
if (!htc_try_send(target, endpoint, packet)) {
packet->status = (target->htc_flags & HTC_OP_STATE_STOPPING) ?
-ECANCELED : -ENOSPC;
INIT_LIST_HEAD(&queue);
list_add(&packet->list, &queue);
htc_tx_complete(endpoint, &queue);
}
return 0;
}
/* flush endpoint TX queue */
void htc_flush_txep(struct htc_target *target,
enum htc_endpoint_id eid, u16 tag)
{
struct htc_packet *packet, *tmp_pkt;
struct list_head discard_q, container;
struct htc_endpoint *endpoint = &target->endpoint[eid];
if (!endpoint->svc_id) {
WARN_ON(1);
return;
}
/* initialize the discard queue */
INIT_LIST_HEAD(&discard_q);
spin_lock_bh(&target->tx_lock);
list_for_each_entry_safe(packet, tmp_pkt, &endpoint->txq, list) {
if ((tag == HTC_TX_PACKET_TAG_ALL) ||
(tag == packet->info.tx.tag))
list_move_tail(&packet->list, &discard_q);
}
spin_unlock_bh(&target->tx_lock);
list_for_each_entry_safe(packet, tmp_pkt, &discard_q, list) {
packet->status = -ECANCELED;
list_del(&packet->list);
ath6kl_dbg(ATH6KL_DBG_TRC,
"flushing tx pkt:0x%p, len:%d, ep:%d tag:0x%X\n",
packet, packet->act_len,
packet->endpoint, packet->info.tx.tag);
INIT_LIST_HEAD(&container);
list_add_tail(&packet->list, &container);
htc_tx_complete(endpoint, &container);
}
}
static void htc_flush_txep_all(struct htc_target *target)
{
struct htc_endpoint *endpoint;
int i;
dump_cred_dist_stats(target);
for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) {
endpoint = &target->endpoint[i];
if (endpoint->svc_id == 0)
/* not in use.. */
continue;
htc_flush_txep(target, i, HTC_TX_PACKET_TAG_ALL);
}
}
void htc_indicate_activity_change(struct htc_target *target,
enum htc_endpoint_id eid, bool active)
{
struct htc_endpoint *endpoint = &target->endpoint[eid];
bool dist = false;
if (endpoint->svc_id == 0) {
WARN_ON(1);
return;
}
spin_lock_bh(&target->tx_lock);
if (active) {
if (!(endpoint->cred_dist.dist_flags & HTC_EP_ACTIVE)) {
endpoint->cred_dist.dist_flags |= HTC_EP_ACTIVE;
dist = true;
}
} else {
if (endpoint->cred_dist.dist_flags & HTC_EP_ACTIVE) {
endpoint->cred_dist.dist_flags &= ~HTC_EP_ACTIVE;
dist = true;
}
}
if (dist) {
endpoint->cred_dist.txq_depth =
get_queue_depth(&endpoint->txq);
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "ctxt:0x%p dist:0x%p\n",
target->cred_dist_cntxt, &target->cred_dist_list);
ath6k_credit_distribute(target->cred_dist_cntxt,
&target->cred_dist_list,
HTC_CREDIT_DIST_ACTIVITY_CHANGE);
}
spin_unlock_bh(&target->tx_lock);
if (dist && !active)
htc_chk_ep_txq(target);
}
/* HTC Rx */
static inline void htc_update_rx_stats(struct htc_endpoint *endpoint,
int n_look_ahds)
{
endpoint->ep_st.rx_pkts++;
if (n_look_ahds == 1)
endpoint->ep_st.rx_lkahds++;
else if (n_look_ahds > 1)
endpoint->ep_st.rx_bundle_lkahd++;
}
static inline bool htc_valid_rx_frame_len(struct htc_target *target,
enum htc_endpoint_id eid, int len)
{
return (eid == target->dev->ar->ctrl_ep) ?
len <= ATH6KL_BUFFER_SIZE : len <= ATH6KL_AMSDU_BUFFER_SIZE;
}
static int htc_add_rxbuf(struct htc_target *target, struct htc_packet *packet)
{
struct list_head queue;
INIT_LIST_HEAD(&queue);
list_add_tail(&packet->list, &queue);
return htc_add_rxbuf_multiple(target, &queue);
}
static void htc_reclaim_rxbuf(struct htc_target *target,
struct htc_packet *packet,
struct htc_endpoint *ep)
{
if (packet->info.rx.rx_flags & HTC_RX_PKT_NO_RECYCLE) {
htc_rxpkt_reset(packet);
packet->status = -ECANCELED;
ep->ep_cb.rx(ep->target, packet);
} else {
htc_rxpkt_reset(packet);
htc_add_rxbuf((void *)(target), packet);
}
}
static void reclaim_rx_ctrl_buf(struct htc_target *target,
struct htc_packet *packet)
{
spin_lock_bh(&target->htc_lock);
list_add_tail(&packet->list, &target->free_ctrl_rxbuf);
spin_unlock_bh(&target->htc_lock);
}
static int dev_rx_pkt(struct htc_target *target, struct htc_packet *packet,
u32 rx_len)
{
struct ath6kl_device *dev = target->dev;
u32 padded_len;
int status;
padded_len = CALC_TXRX_PADDED_LEN(dev, rx_len);
if (padded_len > packet->buf_len) {
ath6kl_err("not enough receive space for packet - padlen:%d recvlen:%d bufferlen:%d\n",
padded_len, rx_len, packet->buf_len);
return -ENOMEM;
}
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"dev_rx_pkt (0x%p : hdr:0x%X) padded len: %d mbox:0x%X (mode:%s)\n",
packet, packet->info.rx.exp_hdr,
padded_len, dev->ar->mbox_info.htc_addr, "sync");
status = hif_read_write_sync(dev->ar,
dev->ar->mbox_info.htc_addr,
packet->buf, padded_len,
HIF_RD_SYNC_BLOCK_FIX);
packet->status = status;
return status;
}
/*
* optimization for recv packets, we can indicate a
* "hint" that there are more single-packets to fetch
* on this endpoint.
*/
static void set_rxpkt_indication_flag(u32 lk_ahd,
struct htc_endpoint *endpoint,
struct htc_packet *packet)
{
struct htc_frame_hdr *htc_hdr = (struct htc_frame_hdr *)&lk_ahd;
if (htc_hdr->eid == packet->endpoint) {
if (!list_empty(&endpoint->rx_bufq))
packet->info.rx.indicat_flags |=
HTC_RX_FLAGS_INDICATE_MORE_PKTS;
}
}
static void chk_rx_water_mark(struct htc_endpoint *endpoint)
{
struct htc_ep_callbacks ep_cb = endpoint->ep_cb;
if (ep_cb.rx_refill_thresh > 0) {
spin_lock_bh(&endpoint->target->rx_lock);
if (get_queue_depth(&endpoint->rx_bufq)
< ep_cb.rx_refill_thresh) {
spin_unlock_bh(&endpoint->target->rx_lock);
ep_cb.rx_refill(endpoint->target, endpoint->eid);
return;
}
spin_unlock_bh(&endpoint->target->rx_lock);
}
}
/* This function is called with rx_lock held */
static int htc_setup_rxpkts(struct htc_target *target, struct htc_endpoint *ep,
u32 *lk_ahds, struct list_head *queue, int n_msg)
{
struct htc_packet *packet;
/* FIXME: type of lk_ahds can't be right */
struct htc_frame_hdr *htc_hdr = (struct htc_frame_hdr *)lk_ahds;
struct htc_ep_callbacks ep_cb;
int status = 0, j, full_len;
bool no_recycle;
full_len = CALC_TXRX_PADDED_LEN(target->dev,
le16_to_cpu(htc_hdr->payld_len) +
sizeof(*htc_hdr));
if (!htc_valid_rx_frame_len(target, ep->eid, full_len)) {
ath6kl_warn("Rx buffer requested with invalid length\n");
return -EINVAL;
}
ep_cb = ep->ep_cb;
for (j = 0; j < n_msg; j++) {
/*
* Reset flag, any packets allocated using the
* rx_alloc() API cannot be recycled on
* cleanup,they must be explicitly returned.
*/
no_recycle = false;
if (ep_cb.rx_allocthresh &&
(full_len > ep_cb.rx_alloc_thresh)) {
ep->ep_st.rx_alloc_thresh_hit += 1;
ep->ep_st.rxalloc_thresh_byte +=
le16_to_cpu(htc_hdr->payld_len);
spin_unlock_bh(&target->rx_lock);
no_recycle = true;
packet = ep_cb.rx_allocthresh(ep->target, ep->eid,
full_len);
spin_lock_bh(&target->rx_lock);
} else {
/* refill handler is being used */
if (list_empty(&ep->rx_bufq)) {
if (ep_cb.rx_refill) {
spin_unlock_bh(&target->rx_lock);
ep_cb.rx_refill(ep->target, ep->eid);
spin_lock_bh(&target->rx_lock);
}
}
if (list_empty(&ep->rx_bufq))
packet = NULL;
else {
packet = list_first_entry(&ep->rx_bufq,
struct htc_packet, list);
list_del(&packet->list);
}
}
if (!packet) {
target->rx_st_flags |= HTC_RECV_WAIT_BUFFERS;
target->ep_waiting = ep->eid;
return -ENOSPC;
}
/* clear flags */
packet->info.rx.rx_flags = 0;
packet->info.rx.indicat_flags = 0;
packet->status = 0;
if (no_recycle)
/*
* flag that these packets cannot be
* recycled, they have to be returned to
* the user
*/
packet->info.rx.rx_flags |= HTC_RX_PKT_NO_RECYCLE;
/* Caller needs to free this upon any failure */
list_add_tail(&packet->list, queue);
if (target->htc_flags & HTC_OP_STATE_STOPPING) {
status = -ECANCELED;
break;
}
if (j) {
packet->info.rx.rx_flags |= HTC_RX_PKT_REFRESH_HDR;
packet->info.rx.exp_hdr = 0xFFFFFFFF;
} else
/* set expected look ahead */
packet->info.rx.exp_hdr = *lk_ahds;
packet->act_len = le16_to_cpu(htc_hdr->payld_len) +
HTC_HDR_LENGTH;
}
return status;
}
static int alloc_and_prep_rxpkts(struct htc_target *target,
u32 lk_ahds[], int msg,
struct htc_endpoint *endpoint,
struct list_head *queue)
{
int status = 0;
struct htc_packet *packet, *tmp_pkt;
struct htc_frame_hdr *htc_hdr;
int i, n_msg;
spin_lock_bh(&target->rx_lock);
for (i = 0; i < msg; i++) {
htc_hdr = (struct htc_frame_hdr *)&lk_ahds[i];
if (htc_hdr->eid >= ENDPOINT_MAX) {
ath6kl_err("invalid ep in look-ahead: %d\n",
htc_hdr->eid);
status = -ENOMEM;
break;
}
if (htc_hdr->eid != endpoint->eid) {
ath6kl_err("invalid ep in look-ahead: %d should be : %d (index:%d)\n",
htc_hdr->eid, endpoint->eid, i);
status = -ENOMEM;
break;
}
if (le16_to_cpu(htc_hdr->payld_len) > HTC_MAX_PAYLOAD_LENGTH) {
ath6kl_err("payload len %d exceeds max htc : %d !\n",
htc_hdr->payld_len,
(u32) HTC_MAX_PAYLOAD_LENGTH);
status = -ENOMEM;
break;
}
if (endpoint->svc_id == 0) {
ath6kl_err("ep %d is not connected !\n", htc_hdr->eid);
status = -ENOMEM;
break;
}
if (htc_hdr->flags & HTC_FLG_RX_BNDL_CNT) {
/*
* HTC header indicates that every packet to follow
* has the same padded length so that it can be
* optimally fetched as a full bundle.
*/
n_msg = (htc_hdr->flags & HTC_FLG_RX_BNDL_CNT) >>
HTC_FLG_RX_BNDL_CNT_S;
/* the count doesn't include the starter frame */
n_msg++;
if (n_msg > target->msg_per_bndl_max) {
status = -ENOMEM;
break;
}
endpoint->ep_st.rx_bundle_from_hdr += 1;
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"htc hdr indicates :%d msg can be fetched as a bundle\n",
n_msg);
} else
/* HTC header only indicates 1 message to fetch */
n_msg = 1;
/* Setup packet buffers for each message */
status = htc_setup_rxpkts(target, endpoint, &lk_ahds[i], queue,
n_msg);
/*
* This is due to unavailabilty of buffers to rx entire data.
* Return no error so that free buffers from queue can be used
* to receive partial data.
*/
if (status == -ENOSPC) {
spin_unlock_bh(&target->rx_lock);
return 0;
}
if (status)
break;
}
spin_unlock_bh(&target->rx_lock);
if (status) {
list_for_each_entry_safe(packet, tmp_pkt, queue, list) {
list_del(&packet->list);
htc_reclaim_rxbuf(target, packet,
&target->endpoint[packet->endpoint]);
}
}
return status;
}
static void htc_ctrl_rx(struct htc_target *context, struct htc_packet *packets)
{
if (packets->endpoint != ENDPOINT_0) {
WARN_ON(1);
return;
}
if (packets->status == -ECANCELED) {
reclaim_rx_ctrl_buf(context, packets);
return;
}
if (packets->act_len > 0) {
ath6kl_err("htc_ctrl_rx, got message with len:%zu\n",
packets->act_len + HTC_HDR_LENGTH);
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES,
"Unexpected ENDPOINT 0 Message",
packets->buf - HTC_HDR_LENGTH,
packets->act_len + HTC_HDR_LENGTH);
}
htc_reclaim_rxbuf(context, packets, &context->endpoint[0]);
}
static void htc_proc_cred_rpt(struct htc_target *target,
struct htc_credit_report *rpt,
int n_entries,
enum htc_endpoint_id from_ep)
{
struct htc_endpoint *endpoint;
int tot_credits = 0, i;
bool dist = false;
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"htc_proc_cred_rpt, credit report entries:%d\n", n_entries);
spin_lock_bh(&target->tx_lock);
for (i = 0; i < n_entries; i++, rpt++) {
if (rpt->eid >= ENDPOINT_MAX) {
WARN_ON(1);
spin_unlock_bh(&target->tx_lock);
return;
}
endpoint = &target->endpoint[rpt->eid];
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, " ep %d got %d credits\n",
rpt->eid, rpt->credits);
endpoint->ep_st.tx_cred_rpt += 1;
endpoint->ep_st.cred_retnd += rpt->credits;
if (from_ep == rpt->eid) {
/*
* This credit report arrived on the same endpoint
* indicating it arrived in an RX packet.
*/
endpoint->ep_st.cred_from_rx += rpt->credits;
endpoint->ep_st.cred_rpt_from_rx += 1;
} else if (from_ep == ENDPOINT_0) {
/* credit arrived on endpoint 0 as a NULL message */
endpoint->ep_st.cred_from_ep0 += rpt->credits;
endpoint->ep_st.cred_rpt_ep0 += 1;
} else {
endpoint->ep_st.cred_from_other += rpt->credits;
endpoint->ep_st.cred_rpt_from_other += 1;
}
if (ENDPOINT_0 == rpt->eid)
/* always give endpoint 0 credits back */
endpoint->cred_dist.credits += rpt->credits;
else {
endpoint->cred_dist.cred_to_dist += rpt->credits;
dist = true;
}
/*
* Refresh tx depth for distribution function that will
* recover these credits NOTE: this is only valid when
* there are credits to recover!
*/
endpoint->cred_dist.txq_depth =
get_queue_depth(&endpoint->txq);
tot_credits += rpt->credits;
}
ath6kl_dbg(ATH6KL_DBG_HTC_SEND,
"report indicated %d credits to distribute\n",
tot_credits);
if (dist) {
/*
* This was a credit return based on a completed send
* operations note, this is done with the lock held
*/
ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "ctxt:0x%p dist:0x%p\n",
target->cred_dist_cntxt, &target->cred_dist_list);
ath6k_credit_distribute(target->cred_dist_cntxt,
&target->cred_dist_list,
HTC_CREDIT_DIST_SEND_COMPLETE);
}
spin_unlock_bh(&target->tx_lock);
if (tot_credits)
htc_chk_ep_txq(target);
}
static int htc_parse_trailer(struct htc_target *target,
struct htc_record_hdr *record,
u8 *record_buf, u32 *next_lk_ahds,
enum htc_endpoint_id endpoint,
int *n_lk_ahds)
{
struct htc_bundle_lkahd_rpt *bundle_lkahd_rpt;
struct htc_lookahead_report *lk_ahd;
int len;
switch (record->rec_id) {
case HTC_RECORD_CREDITS:
len = record->len / sizeof(struct htc_credit_report);
if (!len) {
WARN_ON(1);
return -EINVAL;
}
htc_proc_cred_rpt(target,
(struct htc_credit_report *) record_buf,
len, endpoint);
break;
case HTC_RECORD_LOOKAHEAD:
len = record->len / sizeof(*lk_ahd);
if (!len) {
WARN_ON(1);
return -EINVAL;
}
lk_ahd = (struct htc_lookahead_report *) record_buf;
if ((lk_ahd->pre_valid == ((~lk_ahd->post_valid) & 0xFF))
&& next_lk_ahds) {
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"lk_ahd report found (pre valid:0x%X, post valid:0x%X)\n",
lk_ahd->pre_valid, lk_ahd->post_valid);
/* look ahead bytes are valid, copy them over */
memcpy((u8 *)&next_lk_ahds[0], lk_ahd->lk_ahd, 4);
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES, "Next Look Ahead",
next_lk_ahds, 4);
*n_lk_ahds = 1;
}
break;
case HTC_RECORD_LOOKAHEAD_BUNDLE:
len = record->len / sizeof(*bundle_lkahd_rpt);
if (!len || (len > HTC_HOST_MAX_MSG_PER_BUNDLE)) {
WARN_ON(1);
return -EINVAL;
}
if (next_lk_ahds) {
int i;
bundle_lkahd_rpt =
(struct htc_bundle_lkahd_rpt *) record_buf;
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES, "Bundle lk_ahd",
record_buf, record->len);
for (i = 0; i < len; i++) {
memcpy((u8 *)&next_lk_ahds[i],
bundle_lkahd_rpt->lk_ahd, 4);
bundle_lkahd_rpt++;
}
*n_lk_ahds = i;
}
break;
default:
ath6kl_err("unhandled record: id:%d len:%d\n",
record->rec_id, record->len);
break;
}
return 0;
}
static int htc_proc_trailer(struct htc_target *target,
u8 *buf, int len, u32 *next_lk_ahds,
int *n_lk_ahds, enum htc_endpoint_id endpoint)
{
struct htc_record_hdr *record;
int orig_len;
int status;
u8 *record_buf;
u8 *orig_buf;
ath6kl_dbg(ATH6KL_DBG_HTC_RECV, "+htc_proc_trailer (len:%d)\n", len);
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES, "Recv Trailer", buf, len);
orig_buf = buf;
orig_len = len;
status = 0;
while (len > 0) {
if (len < sizeof(struct htc_record_hdr)) {
status = -ENOMEM;
break;
}
/* these are byte aligned structs */
record = (struct htc_record_hdr *) buf;
len -= sizeof(struct htc_record_hdr);
buf += sizeof(struct htc_record_hdr);
if (record->len > len) {
ath6kl_err("invalid record len: %d (id:%d) buf has: %d bytes left\n",
record->len, record->rec_id, len);
status = -ENOMEM;
break;
}
record_buf = buf;
status = htc_parse_trailer(target, record, record_buf,
next_lk_ahds, endpoint, n_lk_ahds);
if (status)
break;
/* advance buffer past this record for next time around */
buf += record->len;
len -= record->len;
}
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES, "BAD Recv Trailer",
orig_buf, orig_len);
return status;
}
static int htc_proc_rxhdr(struct htc_target *target,
struct htc_packet *packet,
u32 *next_lkahds, int *n_lkahds)
{
int status = 0;
u16 payload_len;
u32 lk_ahd;
struct htc_frame_hdr *htc_hdr = (struct htc_frame_hdr *)packet->buf;
if (n_lkahds != NULL)
*n_lkahds = 0;
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES, "HTC Recv PKT", packet->buf,
packet->act_len);
/*
* NOTE: we cannot assume the alignment of buf, so we use the safe
* macros to retrieve 16 bit fields.
*/
payload_len = le16_to_cpu(get_unaligned(&htc_hdr->payld_len));
memcpy((u8 *)&lk_ahd, packet->buf, sizeof(lk_ahd));
if (packet->info.rx.rx_flags & HTC_RX_PKT_REFRESH_HDR) {
/*
* Refresh the expected header and the actual length as it
* was unknown when this packet was grabbed as part of the
* bundle.
*/
packet->info.rx.exp_hdr = lk_ahd;
packet->act_len = payload_len + HTC_HDR_LENGTH;
/* validate the actual header that was refreshed */
if (packet->act_len > packet->buf_len) {
ath6kl_err("refreshed hdr payload len (%d) in bundled recv is invalid (hdr: 0x%X)\n",
payload_len, lk_ahd);
/*
* Limit this to max buffer just to print out some
* of the buffer.
*/
packet->act_len = min(packet->act_len, packet->buf_len);
status = -ENOMEM;
goto fail_rx;
}
if (packet->endpoint != htc_hdr->eid) {
ath6kl_err("refreshed hdr ep (%d) does not match expected ep (%d)\n",
htc_hdr->eid, packet->endpoint);
status = -ENOMEM;
goto fail_rx;
}
}
if (lk_ahd != packet->info.rx.exp_hdr) {
ath6kl_err("htc_proc_rxhdr, lk_ahd mismatch! (pPkt:0x%p flags:0x%X)\n",
packet, packet->info.rx.rx_flags);
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES, "Expected Message lk_ahd",
&packet->info.rx.exp_hdr, 4);
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES, "Current Frame Header",
(u8 *)&lk_ahd, sizeof(lk_ahd));
status = -ENOMEM;
goto fail_rx;
}
if (htc_hdr->flags & HTC_FLG_RX_TRAILER) {
if (htc_hdr->ctrl[0] < sizeof(struct htc_record_hdr) ||
htc_hdr->ctrl[0] > payload_len) {
ath6kl_err("htc_proc_rxhdr, invalid hdr (payload len should be :%d, CB[0] is:%d)\n",
payload_len, htc_hdr->ctrl[0]);
status = -ENOMEM;
goto fail_rx;
}
if (packet->info.rx.rx_flags & HTC_RX_PKT_IGNORE_LOOKAHEAD) {
next_lkahds = NULL;
n_lkahds = NULL;
}
status = htc_proc_trailer(target, packet->buf + HTC_HDR_LENGTH
+ payload_len - htc_hdr->ctrl[0],
htc_hdr->ctrl[0], next_lkahds,
n_lkahds, packet->endpoint);
if (status)
goto fail_rx;
packet->act_len -= htc_hdr->ctrl[0];
}
packet->buf += HTC_HDR_LENGTH;
packet->act_len -= HTC_HDR_LENGTH;
fail_rx:
if (status)
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES, "BAD HTC Recv PKT",
packet->buf,
packet->act_len < 256 ? packet->act_len : 256);
else {
if (packet->act_len > 0)
ath6kl_dbg_dump(ATH6KL_DBG_RAW_BYTES,
"HTC - Application Msg",
packet->buf, packet->act_len);
}
return status;
}
static void do_rx_completion(struct htc_endpoint *endpoint,
struct htc_packet *packet)
{
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"htc calling ep %d recv callback on packet 0x%p\n",
endpoint->eid, packet);
endpoint->ep_cb.rx(endpoint->target, packet);
}
static int htc_issue_rxpkt_bundle(struct htc_target *target,
struct list_head *rxq,
struct list_head *sync_compq,
int *n_pkt_fetched, bool part_bundle)
{
struct hif_scatter_req *scat_req;
struct htc_packet *packet;
int rem_space = target->max_rx_bndl_sz;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
int n_scat_pkt, status = 0, i, len;
n_scat_pkt = get_queue_depth(rxq);
n_scat_pkt = min(n_scat_pkt, target->msg_per_bndl_max);
if ((get_queue_depth(rxq) - n_scat_pkt) > 0) {
/*
* We were forced to split this bundle receive operation
* all packets in this partial bundle must have their
* lookaheads ignored.
*/
part_bundle = true;
/*
* This would only happen if the target ignored our max
* bundle limit.
*/
ath6kl_warn("htc_issue_rxpkt_bundle : partial bundle detected num:%d , %d\n",
get_queue_depth(rxq), n_scat_pkt);
}
len = 0;
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"htc_issue_rxpkt_bundle (numpackets: %d , actual : %d)\n",
get_queue_depth(rxq), n_scat_pkt);
scat_req = hif_scatter_req_get(target->dev->ar);
if (scat_req == NULL)
goto fail_rx_pkt;
for (i = 0; i < n_scat_pkt; i++) {
int pad_len;
packet = list_first_entry(rxq, struct htc_packet, list);
list_del(&packet->list);
pad_len = CALC_TXRX_PADDED_LEN(target->dev,
packet->act_len);
if ((rem_space - pad_len) < 0) {
list_add(&packet->list, rxq);
break;
}
rem_space -= pad_len;
if (part_bundle || (i < (n_scat_pkt - 1)))
/*
* Packet 0..n-1 cannot be checked for look-aheads
* since we are fetching a bundle the last packet
* however can have it's lookahead used
*/
packet->info.rx.rx_flags |=
HTC_RX_PKT_IGNORE_LOOKAHEAD;
/* NOTE: 1 HTC packet per scatter entry */
scat_req->scat_list[i].buf = packet->buf;
scat_req->scat_list[i].len = pad_len;
packet->info.rx.rx_flags |= HTC_RX_PKT_PART_OF_BUNDLE;
list_add_tail(&packet->list, sync_compq);
WARN_ON(!scat_req->scat_list[i].len);
len += scat_req->scat_list[i].len;
}
scat_req->len = len;
scat_req->scat_entries = i;
status = ath6kldev_submit_scat_req(target->dev, scat_req, true);
if (!status)
*n_pkt_fetched = i;
/* free scatter request */
hif_scatter_req_add(target->dev->ar, scat_req);
fail_rx_pkt:
return status;
}
static int htc_proc_fetched_rxpkts(struct htc_target *target,
struct list_head *comp_pktq, u32 lk_ahds[],
int *n_lk_ahd)
{
struct htc_packet *packet, *tmp_pkt;
struct htc_endpoint *ep;
int status = 0;
list_for_each_entry_safe(packet, tmp_pkt, comp_pktq, list) {
list_del(&packet->list);
ep = &target->endpoint[packet->endpoint];
/* process header for each of the recv packet */
status = htc_proc_rxhdr(target, packet, lk_ahds, n_lk_ahd);
if (status)
return status;
if (list_empty(comp_pktq)) {
/*
* Last packet's more packet flag is set
* based on the lookahead.
*/
if (*n_lk_ahd > 0)
set_rxpkt_indication_flag(lk_ahds[0],
ep, packet);
} else
/*
* Packets in a bundle automatically have
* this flag set.
*/
packet->info.rx.indicat_flags |=
HTC_RX_FLAGS_INDICATE_MORE_PKTS;
htc_update_rx_stats(ep, *n_lk_ahd);
if (packet->info.rx.rx_flags & HTC_RX_PKT_PART_OF_BUNDLE)
ep->ep_st.rx_bundl += 1;
do_rx_completion(ep, packet);
}
return status;
}
static int htc_fetch_rxpkts(struct htc_target *target,
struct list_head *rx_pktq,
struct list_head *comp_pktq)
{
int fetched_pkts;
bool part_bundle = false;
int status = 0;
/* now go fetch the list of HTC packets */
while (!list_empty(rx_pktq)) {
fetched_pkts = 0;
if (target->rx_bndl_enable && (get_queue_depth(rx_pktq) > 1)) {
/*
* There are enough packets to attempt a
* bundle transfer and recv bundling is
* allowed.
*/
status = htc_issue_rxpkt_bundle(target, rx_pktq,
comp_pktq,
&fetched_pkts,
part_bundle);
if (status)
return status;
if (!list_empty(rx_pktq))
part_bundle = true;
}
if (!fetched_pkts) {
struct htc_packet *packet;
packet = list_first_entry(rx_pktq, struct htc_packet,
list);
list_del(&packet->list);
/* fully synchronous */
packet->completion = NULL;
if (!list_empty(rx_pktq))
/*
* look_aheads in all packet
* except the last one in the
* bundle must be ignored
*/
packet->info.rx.rx_flags |=
HTC_RX_PKT_IGNORE_LOOKAHEAD;
/* go fetch the packet */
status = dev_rx_pkt(target, packet, packet->act_len);
if (status)
return status;
list_add_tail(&packet->list, comp_pktq);
}
}
return status;
}
int htc_rxmsg_pending_handler(struct htc_target *target, u32 msg_look_ahead[],
int *num_pkts)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
{
struct htc_packet *packets, *tmp_pkt;
struct htc_endpoint *endpoint;
struct list_head rx_pktq, comp_pktq;
int status = 0;
u32 look_aheads[HTC_HOST_MAX_MSG_PER_BUNDLE];
int num_look_ahead = 1;
enum htc_endpoint_id id;
int n_fetched = 0;
*num_pkts = 0;
/*
* On first entry copy the look_aheads into our temp array for
* processing
*/
memcpy(look_aheads, msg_look_ahead, sizeof(look_aheads));
while (true) {
/*
* First lookahead sets the expected endpoint IDs for all
* packets in a bundle.
*/
id = ((struct htc_frame_hdr *)&look_aheads[0])->eid;
endpoint = &target->endpoint[id];
if (id >= ENDPOINT_MAX) {
ath6kl_err("MsgPend, invalid endpoint in look-ahead: %d\n",
id);
status = -ENOMEM;
break;
}
INIT_LIST_HEAD(&rx_pktq);
INIT_LIST_HEAD(&comp_pktq);
/*
* Try to allocate as many HTC RX packets indicated by the
* look_aheads.
*/
status = alloc_and_prep_rxpkts(target, look_aheads,
num_look_ahead, endpoint,
&rx_pktq);
if (status)
break;
if (get_queue_depth(&rx_pktq) >= 2)
/*
* A recv bundle was detected, force IRQ status
* re-check again
*/
target->dev->chk_irq_status_cnt = 1;
n_fetched += get_queue_depth(&rx_pktq);
num_look_ahead = 0;
status = htc_fetch_rxpkts(target, &rx_pktq, &comp_pktq);
if (!status)
chk_rx_water_mark(endpoint);
/* Process fetched packets */
status = htc_proc_fetched_rxpkts(target, &comp_pktq,
look_aheads, &num_look_ahead);
if (!num_look_ahead || status)
break;
/*
* For SYNCH processing, if we get here, we are running
* through the loop again due to a detected lookahead. Set
* flag that we should re-check IRQ status registers again
* before leaving IRQ processing, this can net better
* performance in high throughput situations.
*/
target->dev->chk_irq_status_cnt = 1;
}
if (status) {
ath6kl_err("failed to get pending recv messages: %d\n",
status);
/*
* Cleanup any packets we allocated but didn't use to
* actually fetch any packets.
*/
list_for_each_entry_safe(packets, tmp_pkt, &rx_pktq, list) {
list_del(&packets->list);
htc_reclaim_rxbuf(target, packets,
&target->endpoint[packets->endpoint]);
}
/* cleanup any packets in sync completion queue */
list_for_each_entry_safe(packets, tmp_pkt, &comp_pktq, list) {
list_del(&packets->list);
htc_reclaim_rxbuf(target, packets,
&target->endpoint[packets->endpoint]);
}
if (target->htc_flags & HTC_OP_STATE_STOPPING) {
ath6kl_warn("host is going to stop blocking receiver for htc_stop\n");
ath6kldev_rx_control(target->dev, false);
}
}
/*
* Before leaving, check to see if host ran out of buffers and
* needs to stop the receiver.
*/
if (target->rx_st_flags & HTC_RECV_WAIT_BUFFERS) {
ath6kl_warn("host has no rx buffers blocking receiver to prevent overrun\n");
ath6kldev_rx_control(target->dev, false);
}
*num_pkts = n_fetched;
return status;
}
/*
* Synchronously wait for a control message from the target,
* This function is used at initialization time ONLY. At init messages
* on ENDPOINT 0 are expected.
*/
static struct htc_packet *htc_wait_for_ctrl_msg(struct htc_target *target)
{
struct htc_packet *packet = NULL;
struct htc_frame_hdr *htc_hdr;
u32 look_ahead;
if (ath6kldev_poll_mboxmsg_rx(target->dev, &look_ahead,
HTC_TARGET_RESPONSE_TIMEOUT))
return NULL;
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"htc_wait_for_ctrl_msg: look_ahead : 0x%X\n", look_ahead);
htc_hdr = (struct htc_frame_hdr *)&look_ahead;
if (htc_hdr->eid != ENDPOINT_0)
return NULL;
packet = htc_get_control_buf(target, false);
if (!packet)
return NULL;
packet->info.rx.rx_flags = 0;
packet->info.rx.exp_hdr = look_ahead;
packet->act_len = le16_to_cpu(htc_hdr->payld_len) + HTC_HDR_LENGTH;
if (packet->act_len > packet->buf_len)
goto fail_ctrl_rx;
/* we want synchronous operation */
packet->completion = NULL;
/* get the message from the device, this will block */
if (dev_rx_pkt(target, packet, packet->act_len))
goto fail_ctrl_rx;
/* process receive header */
packet->status = htc_proc_rxhdr(target, packet, NULL, NULL);
if (packet->status) {
ath6kl_err("htc_wait_for_ctrl_msg, htc_proc_rxhdr failed (status = %d)\n",
packet->status);
goto fail_ctrl_rx;
}
return packet;
fail_ctrl_rx:
if (packet != NULL) {
htc_rxpkt_reset(packet);
reclaim_rx_ctrl_buf(target, packet);
}
return NULL;
}
int htc_add_rxbuf_multiple(struct htc_target *target,
struct list_head *pkt_queue)
{
struct htc_endpoint *endpoint;
struct htc_packet *first_pkt;
bool rx_unblock = false;
int status = 0, depth;
if (list_empty(pkt_queue))
return -ENOMEM;
first_pkt = list_first_entry(pkt_queue, struct htc_packet, list);
if (first_pkt->endpoint >= ENDPOINT_MAX)
return status;
depth = get_queue_depth(pkt_queue);
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"htc_add_rxbuf_multiple: ep id: %d, cnt:%d, len: %d\n",
first_pkt->endpoint, depth, first_pkt->buf_len);
endpoint = &target->endpoint[first_pkt->endpoint];
if (target->htc_flags & HTC_OP_STATE_STOPPING) {
struct htc_packet *packet, *tmp_pkt;
/* walk through queue and mark each one canceled */
list_for_each_entry_safe(packet, tmp_pkt, pkt_queue, list) {
packet->status = -ECANCELED;
list_del(&packet->list);
do_rx_completion(endpoint, packet);
}
return status;
}
spin_lock_bh(&target->rx_lock);
list_splice_tail_init(pkt_queue, &endpoint->rx_bufq);
/* check if we are blocked waiting for a new buffer */
if (target->rx_st_flags & HTC_RECV_WAIT_BUFFERS) {
if (target->ep_waiting == first_pkt->endpoint) {
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"receiver was blocked on ep:%d, unblocking.\n",
target->ep_waiting);
target->rx_st_flags &= ~HTC_RECV_WAIT_BUFFERS;
target->ep_waiting = ENDPOINT_MAX;
rx_unblock = true;
}
}
spin_unlock_bh(&target->rx_lock);
if (rx_unblock && !(target->htc_flags & HTC_OP_STATE_STOPPING))
/* TODO : implement a buffer threshold count? */
ath6kldev_rx_control(target->dev, true);
return status;
}
void htc_flush_rx_buf(struct htc_target *target)
{
struct htc_endpoint *endpoint;
struct htc_packet *packet, *tmp_pkt;
int i;
for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) {
endpoint = &target->endpoint[i];
if (!endpoint->svc_id)
/* not in use.. */
continue;
spin_lock_bh(&target->rx_lock);
list_for_each_entry_safe(packet, tmp_pkt,
&endpoint->rx_bufq, list) {
list_del(&packet->list);
spin_unlock_bh(&target->rx_lock);
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"flushing rx pkt:0x%p, len:%d, ep:%d\n",
packet, packet->buf_len,
packet->endpoint);
dev_kfree_skb(packet->pkt_cntxt);
spin_lock_bh(&target->rx_lock);
}
spin_unlock_bh(&target->rx_lock);
}
}
int htc_conn_service(struct htc_target *target,
struct htc_service_connect_req *conn_req,
struct htc_service_connect_resp *conn_resp)
{
struct htc_packet *rx_pkt = NULL;
struct htc_packet *tx_pkt = NULL;
struct htc_conn_service_resp *resp_msg;
struct htc_conn_service_msg *conn_msg;
struct htc_endpoint *endpoint;
enum htc_endpoint_id assigned_ep = ENDPOINT_MAX;
unsigned int max_msg_sz = 0;
int status = 0;
ath6kl_dbg(ATH6KL_DBG_TRC,
"htc_conn_service, target:0x%p service id:0x%X\n",
target, conn_req->svc_id);
if (conn_req->svc_id == HTC_CTRL_RSVD_SVC) {
/* special case for pseudo control service */
assigned_ep = ENDPOINT_0;
max_msg_sz = HTC_MAX_CTRL_MSG_LEN;
} else {
/* allocate a packet to send to the target */
tx_pkt = htc_get_control_buf(target, true);
if (!tx_pkt)
return -ENOMEM;
conn_msg = (struct htc_conn_service_msg *)tx_pkt->buf;
memset(conn_msg, 0, sizeof(*conn_msg));
conn_msg->msg_id = cpu_to_le16(HTC_MSG_CONN_SVC_ID);
conn_msg->svc_id = cpu_to_le16(conn_req->svc_id);
conn_msg->conn_flags = cpu_to_le16(conn_req->conn_flags);
set_htc_pkt_info(tx_pkt, NULL, (u8 *) conn_msg,
sizeof(*conn_msg) + conn_msg->svc_meta_len,
ENDPOINT_0, HTC_SERVICE_TX_PACKET_TAG);
/* we want synchronous operation */
tx_pkt->completion = NULL;
htc_prep_send_pkt(tx_pkt, 0, 0, 0);
status = htc_issue_send(target, tx_pkt);
if (status)
goto fail_tx;
/* wait for response */
rx_pkt = htc_wait_for_ctrl_msg(target);
if (!rx_pkt) {
status = -ENOMEM;
goto fail_tx;
}
resp_msg = (struct htc_conn_service_resp *)rx_pkt->buf;
if ((le16_to_cpu(resp_msg->msg_id) != HTC_MSG_CONN_SVC_RESP_ID)
|| (rx_pkt->act_len < sizeof(*resp_msg))) {
status = -ENOMEM;
goto fail_tx;
}
conn_resp->resp_code = resp_msg->status;
/* check response status */
if (resp_msg->status != HTC_SERVICE_SUCCESS) {
ath6kl_err("target failed service 0x%X connect request (status:%d)\n",
resp_msg->svc_id, resp_msg->status);
status = -ENOMEM;
goto fail_tx;
}
assigned_ep = (enum htc_endpoint_id)resp_msg->eid;
max_msg_sz = le16_to_cpu(resp_msg->max_msg_sz);
}
if (assigned_ep >= ENDPOINT_MAX || !max_msg_sz) {
status = -ENOMEM;
goto fail_tx;
}
endpoint = &target->endpoint[assigned_ep];
endpoint->eid = assigned_ep;
if (endpoint->svc_id) {
status = -ENOMEM;
goto fail_tx;
}
/* return assigned endpoint to caller */
conn_resp->endpoint = assigned_ep;
conn_resp->len_max = max_msg_sz;
/* setup the endpoint */
/* this marks the endpoint in use */
endpoint->svc_id = conn_req->svc_id;
endpoint->max_txq_depth = conn_req->max_txq_depth;
endpoint->len_max = max_msg_sz;
endpoint->ep_cb = conn_req->ep_cb;
endpoint->cred_dist.svc_id = conn_req->svc_id;
endpoint->cred_dist.htc_rsvd = endpoint;
endpoint->cred_dist.endpoint = assigned_ep;
endpoint->cred_dist.cred_sz = target->tgt_cred_sz;
if (conn_req->max_rxmsg_sz) {
/*
* Override cred_per_msg calculation, this optimizes
* the credit-low indications since the host will actually
* issue smaller messages in the Send path.
*/
if (conn_req->max_rxmsg_sz > max_msg_sz) {
status = -ENOMEM;
goto fail_tx;
}
endpoint->cred_dist.cred_per_msg =
conn_req->max_rxmsg_sz / target->tgt_cred_sz;
} else
endpoint->cred_dist.cred_per_msg =
max_msg_sz / target->tgt_cred_sz;
if (!endpoint->cred_dist.cred_per_msg)
endpoint->cred_dist.cred_per_msg = 1;
/* save local connection flags */
endpoint->conn_flags = conn_req->flags;
fail_tx:
if (tx_pkt)
htc_reclaim_txctrl_buf(target, tx_pkt);
if (rx_pkt) {
htc_rxpkt_reset(rx_pkt);
reclaim_rx_ctrl_buf(target, rx_pkt);
}
return status;
}
static void reset_ep_state(struct htc_target *target)
{
struct htc_endpoint *endpoint;
int i;
for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) {
endpoint = &target->endpoint[i];
memset(&endpoint->cred_dist, 0, sizeof(endpoint->cred_dist));
endpoint->svc_id = 0;
endpoint->len_max = 0;
endpoint->max_txq_depth = 0;
memset(&endpoint->ep_st, 0,
sizeof(endpoint->ep_st));
INIT_LIST_HEAD(&endpoint->rx_bufq);
INIT_LIST_HEAD(&endpoint->txq);
endpoint->target = target;
}
/* reset distribution list */
INIT_LIST_HEAD(&target->cred_dist_list);
}
int htc_get_rxbuf_num(struct htc_target *target, enum htc_endpoint_id endpoint)
{
int num;
spin_lock_bh(&target->rx_lock);
num = get_queue_depth(&(target->endpoint[endpoint].rx_bufq));
spin_unlock_bh(&target->rx_lock);
return num;
}
static void htc_setup_msg_bndl(struct htc_target *target)
{
struct hif_dev_scat_sup_info *scat_info = &target->dev->hif_scat_info;
/* limit what HTC can handle */
target->msg_per_bndl_max = min(HTC_HOST_MAX_MSG_PER_BUNDLE,
target->msg_per_bndl_max);
if (ath6kl_hif_enable_scatter(target->dev->ar, scat_info)) {
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
target->msg_per_bndl_max = 0;
return;
}
/* limit bundle what the device layer can handle */
target->msg_per_bndl_max = min(scat_info->max_scat_entries,
target->msg_per_bndl_max);
ath6kl_dbg(ATH6KL_DBG_TRC,
"htc bundling allowed. max msg per htc bundle: %d\n",
target->msg_per_bndl_max);
/* Max rx bundle size is limited by the max tx bundle size */
target->max_rx_bndl_sz = scat_info->max_xfer_szper_scatreq;
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
/* Max tx bundle size if limited by the extended mbox address range */
target->max_tx_bndl_sz = min(HIF_MBOX0_EXT_WIDTH,
scat_info->max_xfer_szper_scatreq);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
ath6kl_dbg(ATH6KL_DBG_ANY, "max recv: %d max send: %d\n",
target->max_rx_bndl_sz, target->max_tx_bndl_sz);
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
if (target->max_tx_bndl_sz)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
target->tx_bndl_enable = true;
if (target->max_rx_bndl_sz)
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 04:22:30 +07:00
target->rx_bndl_enable = true;
if ((target->tgt_cred_sz % target->dev->block_sz) != 0) {
ath6kl_warn("credit size: %d is not block aligned! Disabling send bundling\n",
target->tgt_cred_sz);
/*
* Disallow send bundling since the credit size is
* not aligned to a block size the I/O block
* padding will spill into the next credit buffer
* which is fatal.
*/
target->tx_bndl_enable = false;
}
}
int htc_wait_target(struct htc_target *target)
{
struct htc_packet *packet = NULL;
struct htc_ready_ext_msg *rdy_msg;
struct htc_service_connect_req connect;
struct htc_service_connect_resp resp;
int status;
/* we should be getting 1 control message that the target is ready */
packet = htc_wait_for_ctrl_msg(target);
if (!packet)
return -ENOMEM;
/* we controlled the buffer creation so it's properly aligned */
rdy_msg = (struct htc_ready_ext_msg *)packet->buf;
if ((le16_to_cpu(rdy_msg->ver2_0_info.msg_id) != HTC_MSG_READY_ID) ||
(packet->act_len < sizeof(struct htc_ready_msg))) {
status = -ENOMEM;
goto fail_wait_target;
}
if (!rdy_msg->ver2_0_info.cred_cnt || !rdy_msg->ver2_0_info.cred_sz) {
status = -ENOMEM;
goto fail_wait_target;
}
target->tgt_creds = le16_to_cpu(rdy_msg->ver2_0_info.cred_cnt);
target->tgt_cred_sz = le16_to_cpu(rdy_msg->ver2_0_info.cred_sz);
ath6kl_dbg(ATH6KL_DBG_HTC_RECV,
"target ready: credits: %d credit size: %d\n",
target->tgt_creds, target->tgt_cred_sz);
/* check if this is an extended ready message */
if (packet->act_len >= sizeof(struct htc_ready_ext_msg)) {
/* this is an extended message */
target->htc_tgt_ver = rdy_msg->htc_ver;
target->msg_per_bndl_max = rdy_msg->msg_per_htc_bndl;
} else {
/* legacy */
target->htc_tgt_ver = HTC_VERSION_2P0;
target->msg_per_bndl_max = 0;
}
ath6kl_dbg(ATH6KL_DBG_TRC, "using htc protocol version : %s (%d)\n",
(target->htc_tgt_ver == HTC_VERSION_2P0) ? "2.0" : ">= 2.1",
target->htc_tgt_ver);
if (target->msg_per_bndl_max > 0)
htc_setup_msg_bndl(target);
/* setup our pseudo HTC control endpoint connection */
memset(&connect, 0, sizeof(connect));
memset(&resp, 0, sizeof(resp));
connect.ep_cb.rx = htc_ctrl_rx;
connect.ep_cb.rx_refill = NULL;
connect.ep_cb.tx_full = NULL;
connect.max_txq_depth = NUM_CONTROL_BUFFERS;
connect.svc_id = HTC_CTRL_RSVD_SVC;
/* connect fake service */
status = htc_conn_service((void *)target, &connect, &resp);
if (status)
ath6kl_hif_cleanup_scatter(target->dev->ar);
fail_wait_target:
if (packet) {
htc_rxpkt_reset(packet);
reclaim_rx_ctrl_buf(target, packet);
}
return status;
}
/*
* Start HTC, enable interrupts and let the target know
* host has finished setup.
*/
int htc_start(struct htc_target *target)
{
struct htc_packet *packet;
int status;
/* Disable interrupts at the chip level */
ath6kldev_disable_intrs(target->dev);
target->htc_flags = 0;
target->rx_st_flags = 0;
/* Push control receive buffers into htc control endpoint */
while ((packet = htc_get_control_buf(target, false)) != NULL) {
status = htc_add_rxbuf(target, packet);
if (status)
return status;
}
/* NOTE: the first entry in the distribution list is ENDPOINT_0 */
ath6k_credit_init(target->cred_dist_cntxt, &target->cred_dist_list,
target->tgt_creds);
dump_cred_dist_stats(target);
/* Indicate to the target of the setup completion */
status = htc_setup_tx_complete(target);
if (status)
return status;
/* unmask interrupts */
status = ath6kldev_unmask_intrs(target->dev);
if (status)
htc_stop(target);
return status;
}
/* htc_stop: stop interrupt reception, and flush all queued buffers */
void htc_stop(struct htc_target *target)
{
spin_lock_bh(&target->htc_lock);
target->htc_flags |= HTC_OP_STATE_STOPPING;
spin_unlock_bh(&target->htc_lock);
/*
* Masking interrupts is a synchronous operation, when this
* function returns all pending HIF I/O has completed, we can
* safely flush the queues.
*/
ath6kldev_mask_intrs(target->dev);
htc_flush_txep_all(target);
htc_flush_rx_buf(target);
reset_ep_state(target);
}
void *htc_create(struct ath6kl *ar)
{
struct htc_target *target = NULL;
struct htc_packet *packet;
int status = 0, i = 0;
u32 block_size, ctrl_bufsz;
target = kzalloc(sizeof(*target), GFP_KERNEL);
if (!target) {
ath6kl_err("unable to allocate memory\n");
return NULL;
}
target->dev = kzalloc(sizeof(*target->dev), GFP_KERNEL);
if (!target->dev) {
ath6kl_err("unable to allocate memory\n");
status = -ENOMEM;
goto fail_create_htc;
}
spin_lock_init(&target->htc_lock);
spin_lock_init(&target->rx_lock);
spin_lock_init(&target->tx_lock);
INIT_LIST_HEAD(&target->free_ctrl_txbuf);
INIT_LIST_HEAD(&target->free_ctrl_rxbuf);
INIT_LIST_HEAD(&target->cred_dist_list);
target->dev->ar = ar;
target->dev->htc_cnxt = target;
target->ep_waiting = ENDPOINT_MAX;
reset_ep_state(target);
status = ath6kldev_setup(target->dev);
if (status)
goto fail_create_htc;
block_size = ar->mbox_info.block_size;
ctrl_bufsz = (block_size > HTC_MAX_CTRL_MSG_LEN) ?
(block_size + HTC_HDR_LENGTH) :
(HTC_MAX_CTRL_MSG_LEN + HTC_HDR_LENGTH);
for (i = 0; i < NUM_CONTROL_BUFFERS; i++) {
packet = kzalloc(sizeof(*packet), GFP_KERNEL);
if (!packet)
break;
packet->buf_start = kzalloc(ctrl_bufsz, GFP_KERNEL);
if (!packet->buf_start) {
kfree(packet);
break;
}
packet->buf_len = ctrl_bufsz;
if (i < NUM_CONTROL_RX_BUFFERS) {
packet->act_len = 0;
packet->buf = packet->buf_start;
packet->endpoint = ENDPOINT_0;
list_add_tail(&packet->list, &target->free_ctrl_rxbuf);
} else
list_add_tail(&packet->list, &target->free_ctrl_txbuf);
}
fail_create_htc:
if (i != NUM_CONTROL_BUFFERS || status) {
if (target) {
htc_cleanup(target);
target = NULL;
}
}
return target;
}
/* cleanup the HTC instance */
void htc_cleanup(struct htc_target *target)
{
struct htc_packet *packet, *tmp_packet;
ath6kl_hif_cleanup_scatter(target->dev->ar);
list_for_each_entry_safe(packet, tmp_packet,
&target->free_ctrl_txbuf, list) {
list_del(&packet->list);
kfree(packet->buf_start);
kfree(packet);
}
list_for_each_entry_safe(packet, tmp_packet,
&target->free_ctrl_rxbuf, list) {
list_del(&packet->list);
kfree(packet->buf_start);
kfree(packet);
}
kfree(target->dev);
kfree(target);
}