linux_dsm_epyc7002/drivers/acpi/acpica/acutils.h

729 lines
21 KiB
C
Raw Normal View History

/******************************************************************************
*
* Name: acutils.h -- prototypes for the common (subsystem-wide) procedures
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2016, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef _ACUTILS_H
#define _ACUTILS_H
extern const u8 acpi_gbl_resource_aml_sizes[];
extern const u8 acpi_gbl_resource_aml_serial_bus_sizes[];
/* Strings used by the disassembler and debugger resource dump routines */
#if defined(ACPI_DEBUG_OUTPUT) || defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 04:15:00 +07:00
extern const char *acpi_gbl_bm_decode[];
extern const char *acpi_gbl_config_decode[];
extern const char *acpi_gbl_consume_decode[];
extern const char *acpi_gbl_dec_decode[];
extern const char *acpi_gbl_he_decode[];
extern const char *acpi_gbl_io_decode[];
extern const char *acpi_gbl_ll_decode[];
extern const char *acpi_gbl_max_decode[];
extern const char *acpi_gbl_mem_decode[];
extern const char *acpi_gbl_min_decode[];
extern const char *acpi_gbl_mtp_decode[];
extern const char *acpi_gbl_rng_decode[];
extern const char *acpi_gbl_rw_decode[];
extern const char *acpi_gbl_shr_decode[];
extern const char *acpi_gbl_siz_decode[];
extern const char *acpi_gbl_trs_decode[];
extern const char *acpi_gbl_ttp_decode[];
extern const char *acpi_gbl_typ_decode[];
extern const char *acpi_gbl_ppc_decode[];
extern const char *acpi_gbl_ior_decode[];
extern const char *acpi_gbl_dts_decode[];
extern const char *acpi_gbl_ct_decode[];
extern const char *acpi_gbl_sbt_decode[];
extern const char *acpi_gbl_am_decode[];
extern const char *acpi_gbl_sm_decode[];
extern const char *acpi_gbl_wm_decode[];
extern const char *acpi_gbl_cph_decode[];
extern const char *acpi_gbl_cpo_decode[];
extern const char *acpi_gbl_dp_decode[];
extern const char *acpi_gbl_ed_decode[];
extern const char *acpi_gbl_bpb_decode[];
extern const char *acpi_gbl_sb_decode[];
extern const char *acpi_gbl_fc_decode[];
extern const char *acpi_gbl_pt_decode[];
#endif
/*
* For the iASL compiler case, the output is redirected to stderr so that
* any of the various ACPI errors and warnings do not appear in the output
* files, for either the compiler or disassembler portions of the tool.
*/
#ifdef ACPI_ASL_COMPILER
#include <stdio.h>
#define ACPI_MSG_REDIRECT_BEGIN \
FILE *output_file = acpi_gbl_output_file; \
acpi_os_redirect_output (stderr);
#define ACPI_MSG_REDIRECT_END \
acpi_os_redirect_output (output_file);
#else
/*
* non-iASL case - no redirection, nothing to do
*/
#define ACPI_MSG_REDIRECT_BEGIN
#define ACPI_MSG_REDIRECT_END
#endif
/*
* Common error message prefixes
*/
#define ACPI_MSG_ERROR "ACPI Error: "
#define ACPI_MSG_EXCEPTION "ACPI Exception: "
#define ACPI_MSG_WARNING "ACPI Warning: "
#define ACPI_MSG_INFO "ACPI: "
#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Error (bug): "
#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Warning (bug): "
/*
* Common message suffix
*/
#define ACPI_MSG_SUFFIX \
acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number)
/* Types for Resource descriptor entries */
#define ACPI_INVALID_RESOURCE 0
#define ACPI_FIXED_LENGTH 1
#define ACPI_VARIABLE_LENGTH 2
#define ACPI_SMALL_VARIABLE_LENGTH 3
typedef
acpi_status(*acpi_walk_aml_callback) (u8 *aml,
u32 length,
u32 offset,
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 04:15:00 +07:00
u8 resource_index, void **context);
typedef
acpi_status(*acpi_pkg_callback) (u8 object_type,
union acpi_operand_object *source_object,
union acpi_generic_state * state,
void *context);
struct acpi_pkg_info {
u8 *free_space;
acpi_size length;
u32 object_space;
u32 num_packages;
};
/* Object reference counts */
#define REF_INCREMENT (u16) 0
#define REF_DECREMENT (u16) 1
/* acpi_ut_dump_buffer */
#define DB_BYTE_DISPLAY 1
#define DB_WORD_DISPLAY 2
#define DB_DWORD_DISPLAY 4
#define DB_QWORD_DISPLAY 8
/*
* utnonansi - Non-ANSI C library functions
*/
void acpi_ut_strupr(char *src_string);
void acpi_ut_strlwr(char *src_string);
int acpi_ut_stricmp(char *string1, char *string2);
acpi_status
acpi_ut_strtoul64(char *string,
u32 base, u32 max_integer_byte_width, u64 *ret_integer);
/* Values for max_integer_byte_width above */
#define ACPI_MAX32_BYTE_WIDTH 4
#define ACPI_MAX64_BYTE_WIDTH 8
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* utglobal - Global data structures and procedures
*/
acpi_status acpi_ut_init_globals(void);
#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
const char *acpi_ut_get_mutex_name(u32 mutex_id);
const char *acpi_ut_get_notify_name(u32 notify_value, acpi_object_type type);
#endif
const char *acpi_ut_get_type_name(acpi_object_type type);
const char *acpi_ut_get_node_name(void *object);
const char *acpi_ut_get_descriptor_name(void *object);
const char *acpi_ut_get_reference_name(union acpi_operand_object *object);
const char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc);
const char *acpi_ut_get_region_name(u8 space_id);
const char *acpi_ut_get_event_name(u32 event_id);
char acpi_ut_hex_to_ascii_char(u64 integer, u32 position);
u8 acpi_ut_ascii_char_to_hex(int hex_char);
u8 acpi_ut_valid_object_type(acpi_object_type type);
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* utinit - miscellaneous initialization and shutdown
*/
acpi_status acpi_ut_hardware_initialize(void);
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
void acpi_ut_subsystem_shutdown(void);
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* utcopy - Object construction and conversion interfaces
*/
acpi_status
acpi_ut_build_simple_object(union acpi_operand_object *obj,
union acpi_object *user_obj,
u8 *data_space, u32 *buffer_space_used);
acpi_status
acpi_ut_build_package_object(union acpi_operand_object *obj,
u8 *buffer, u32 *space_used);
acpi_status
acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *obj,
struct acpi_buffer *ret_buffer);
acpi_status
acpi_ut_copy_eobject_to_iobject(union acpi_object *obj,
union acpi_operand_object **internal_obj);
acpi_status
acpi_ut_copy_isimple_to_isimple(union acpi_operand_object *source_obj,
union acpi_operand_object *dest_obj);
acpi_status
acpi_ut_copy_iobject_to_iobject(union acpi_operand_object *source_desc,
union acpi_operand_object **dest_desc,
struct acpi_walk_state *walk_state);
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* utcreate - Object creation
*/
acpi_status
acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action);
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* utdebug - Debug interfaces
*/
void acpi_ut_init_stack_ptr_trace(void);
void acpi_ut_track_stack_ptr(void);
void
acpi_ut_trace(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id);
void
acpi_ut_trace_ptr(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id, void *pointer);
void
acpi_ut_trace_u32(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id, u32 integer);
void
acpi_ut_trace_str(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id, char *string);
void
acpi_ut_exit(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id);
void
acpi_ut_status_exit(u32 line_number,
const char *function_name,
const char *module_name,
u32 component_id, acpi_status status);
void
acpi_ut_value_exit(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id, u64 value);
void
acpi_ut_ptr_exit(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id, u8 *ptr);
void
acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id);
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-28 04:43:00 +07:00
void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 offset);
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
#ifdef ACPI_APPLICATION
void
acpi_ut_dump_buffer_to_file(ACPI_FILE file,
u8 *buffer,
u32 count, u32 display, u32 base_offset);
#endif
void acpi_ut_report_error(char *module_name, u32 line_number);
void acpi_ut_report_info(char *module_name, u32 line_number);
void acpi_ut_report_warning(char *module_name, u32 line_number);
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* utdelete - Object deletion and reference counts
*/
void acpi_ut_add_reference(union acpi_operand_object *object);
void acpi_ut_remove_reference(union acpi_operand_object *object);
void acpi_ut_delete_internal_package_object(union acpi_operand_object *object);
void acpi_ut_delete_internal_simple_object(union acpi_operand_object *object);
void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list);
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* uteval - object evaluation
*/
acpi_status
acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node,
char *path,
u32 expected_return_btypes,
union acpi_operand_object **return_desc);
acpi_status
acpi_ut_evaluate_numeric_object(char *object_name,
struct acpi_namespace_node *device_node,
u64 *value);
acpi_status
acpi_ut_execute_STA(struct acpi_namespace_node *device_node, u32 *status_flags);
acpi_status
acpi_ut_execute_power_methods(struct acpi_namespace_node *device_node,
const char **method_names,
u8 method_count, u8 *out_values);
/*
* utids - device ID support
*/
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
struct acpi_pnp_device_id ** return_id);
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
struct acpi_pnp_device_id ** return_id);
acpi_status
acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
struct acpi_pnp_device_id_list ** return_cid_list);
acpi_status
acpi_ut_execute_CLS(struct acpi_namespace_node *device_node,
struct acpi_pnp_device_id **return_id);
/*
* utlock - reader/writer locks
*/
acpi_status acpi_ut_create_rw_lock(struct acpi_rw_lock *lock);
void acpi_ut_delete_rw_lock(struct acpi_rw_lock *lock);
acpi_status acpi_ut_acquire_read_lock(struct acpi_rw_lock *lock);
acpi_status acpi_ut_release_read_lock(struct acpi_rw_lock *lock);
acpi_status acpi_ut_acquire_write_lock(struct acpi_rw_lock *lock);
void acpi_ut_release_write_lock(struct acpi_rw_lock *lock);
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* utobject - internal object create/delete/cache routines
*/
union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char
*module_name,
u32 line_number,
u32 component_id,
acpi_object_type
type);
void *acpi_ut_allocate_object_desc_dbg(const char *module_name,
u32 line_number, u32 component_id);
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 11:00:00 +07:00
#define acpi_ut_create_internal_object(t) acpi_ut_create_internal_object_dbg (_acpi_module_name,__LINE__,_COMPONENT,t)
#define acpi_ut_allocate_object_desc() acpi_ut_allocate_object_desc_dbg (_acpi_module_name,__LINE__,_COMPONENT)
void acpi_ut_delete_object_desc(union acpi_operand_object *object);
u8 acpi_ut_valid_internal_object(void *object);
union acpi_operand_object *acpi_ut_create_package_object(u32 count);
union acpi_operand_object *acpi_ut_create_integer_object(u64 value);
union acpi_operand_object *acpi_ut_create_buffer_object(acpi_size buffer_size);
union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size);
acpi_status
acpi_ut_get_object_size(union acpi_operand_object *obj, acpi_size * obj_length);
/*
* utosi - Support for the _OSI predefined control method
*/
acpi_status acpi_ut_initialize_interfaces(void);
acpi_status acpi_ut_interface_terminate(void);
acpi_status acpi_ut_install_interface(acpi_string interface_name);
acpi_status acpi_ut_remove_interface(acpi_string interface_name);
acpi_status acpi_ut_update_interfaces(u8 action);
struct acpi_interface_info *acpi_ut_get_interface(acpi_string interface_name);
acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state);
/*
* utpredef - support for predefined names
*/
const union acpi_predefined_info *acpi_ut_get_next_predefined_method(const union
acpi_predefined_info
*this_name);
const union acpi_predefined_info *acpi_ut_match_predefined_method(char *name);
void acpi_ut_get_expected_return_types(char *buffer, u32 expected_btypes);
#if (defined ACPI_ASL_COMPILER || defined ACPI_HELP_APP)
const union acpi_predefined_info *acpi_ut_match_resource_name(char *name);
void
acpi_ut_display_predefined_method(char *buffer,
const union acpi_predefined_info *this_name,
u8 multi_line);
u32 acpi_ut_get_resource_bit_width(char *buffer, u16 types);
#endif
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* utstate - Generic state creation/cache routines
*/
void
acpi_ut_push_generic_state(union acpi_generic_state **list_head,
union acpi_generic_state *state);
union acpi_generic_state *acpi_ut_pop_generic_state(union acpi_generic_state
**list_head);
union acpi_generic_state *acpi_ut_create_generic_state(void);
struct acpi_thread_state *acpi_ut_create_thread_state(void);
union acpi_generic_state *acpi_ut_create_update_state(union acpi_operand_object
*object, u16 action);
union acpi_generic_state *acpi_ut_create_pkg_state(void *internal_object,
void *external_object,
u16 index);
acpi_status
acpi_ut_create_update_state_and_push(union acpi_operand_object *object,
u16 action,
union acpi_generic_state **state_list);
union acpi_generic_state *acpi_ut_create_control_state(void);
void acpi_ut_delete_generic_state(union acpi_generic_state *state);
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* utmath
*/
acpi_status
acpi_ut_divide(u64 in_dividend,
u64 in_divisor, u64 *out_quotient, u64 *out_remainder);
acpi_status
acpi_ut_short_divide(u64 in_dividend,
u32 divisor, u64 *out_quotient, u32 *out_remainder);
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
/*
* utmisc
*/
const struct acpi_exception_info *acpi_ut_validate_exception(acpi_status
status);
u8 acpi_ut_is_pci_root_bridge(char *id);
#if (defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP || defined ACPI_NAMES_APP)
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
u8 acpi_ut_is_aml_table(struct acpi_table_header *table);
#endif
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 11:00:00 +07:00
acpi_status
acpi_ut_walk_package_tree(union acpi_operand_object *source_object,
void *target_object,
acpi_pkg_callback walk_callback, void *context);
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
/* Values for Base above (16=Hex, 10=Decimal) */
#define ACPI_ANY_BASE 0
u32 acpi_ut_dword_byte_swap(u32 value);
void acpi_ut_set_integer_width(u8 revision);
#ifdef ACPI_DEBUG_OUTPUT
void
acpi_ut_display_init_pathname(u8 type,
struct acpi_namespace_node *obj_handle,
char *path);
#endif
/*
* utownerid - Support for Table/Method Owner IDs
*/
acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id);
void acpi_ut_release_owner_id(acpi_owner_id * owner_id);
/*
* utresrc
*/
acpi_status
acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state,
u8 *aml,
acpi_size aml_length,
acpi_walk_aml_callback user_function,
void **context);
acpi_status
acpi_ut_validate_resource(struct acpi_walk_state *walk_state,
void *aml, u8 *return_index);
u32 acpi_ut_get_descriptor_length(void *aml);
u16 acpi_ut_get_resource_length(void *aml);
u8 acpi_ut_get_resource_header_length(void *aml);
u8 acpi_ut_get_resource_type(void *aml);
acpi_status
acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, u8 **end_tag);
/*
* utstring - String and character utilities
*/
void acpi_ut_print_string(char *string, u16 max_length);
#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP
void ut_convert_backslashes(char *pathname);
#endif
u8 acpi_ut_valid_acpi_name(char *name);
u8 acpi_ut_valid_acpi_char(char character, u32 position);
void acpi_ut_repair_name(char *name);
#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION)
u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source);
u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source);
u8
acpi_ut_safe_strncat(char *dest,
acpi_size dest_size,
char *source, acpi_size max_transfer_length);
#endif
/*
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 11:00:00 +07:00
* utmutex - mutex support
*/
acpi_status acpi_ut_mutex_initialize(void);
void acpi_ut_mutex_terminate(void);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 11:00:00 +07:00
acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 11:00:00 +07:00
acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 11:00:00 +07:00
/*
* utalloc - memory allocation and object caching
*/
acpi_status acpi_ut_create_caches(void);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 11:00:00 +07:00
acpi_status acpi_ut_delete_caches(void);
acpi_status acpi_ut_validate_buffer(struct acpi_buffer *buffer);
acpi_status
acpi_ut_initialize_buffer(struct acpi_buffer *buffer,
acpi_size required_length);
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
void *acpi_ut_allocate_and_track(acpi_size size,
u32 component, const char *module, u32 line);
void *acpi_ut_allocate_zeroed_and_track(acpi_size size,
u32 component,
const char *module, u32 line);
void
acpi_ut_free_and_track(void *address,
u32 component, const char *module, u32 line);
void acpi_ut_dump_allocation_info(void);
void acpi_ut_dump_allocations(u32 component, const char *module);
acpi_status
acpi_ut_create_list(char *list_name,
u16 object_size, struct acpi_memory_list **return_cache);
#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
/*
* utaddress - address range check
*/
acpi_status
acpi_ut_add_address_range(acpi_adr_space_type space_id,
acpi_physical_address address,
u32 length, struct acpi_namespace_node *region_node);
void
acpi_ut_remove_address_range(acpi_adr_space_type space_id,
struct acpi_namespace_node *region_node);
u32
acpi_ut_check_address_range(acpi_adr_space_type space_id,
acpi_physical_address address, u32 length, u8 warn);
void acpi_ut_delete_address_lists(void);
/*
* utxferror - various error/warning output functions
*/
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_predefined_warning(const char *module_name,
u32 line_number,
char *pathname,
u8 node_flags, const char *format, ...);
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_predefined_info(const char *module_name,
u32 line_number,
char *pathname, u8 node_flags, const char *format, ...);
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_predefined_bios_error(const char *module_name,
u32 line_number,
char *pathname,
u8 node_flags, const char *format, ...);
void
acpi_ut_namespace_error(const char *module_name,
u32 line_number,
const char *internal_name, acpi_status lookup_status);
void
acpi_ut_method_error(const char *module_name,
u32 line_number,
const char *message,
struct acpi_namespace_node *node,
const char *path, acpi_status lookup_status);
/*
* Utility functions for ACPI names and IDs
*/
const struct ah_predefined_name *acpi_ah_match_predefined_name(char *nameseg);
const struct ah_device_id *acpi_ah_match_hardware_id(char *hid);
const char *acpi_ah_match_uuid(u8 *data);
ACPICA: Utilities: Add formatted printing APIs This patch introduces formatted printing APIs to handle ACPICA specific formatted print requirements. Currently only specific OSPMs will use this customized printing support, Linux kernel doesn't use these APIs at this time. It will be enabled for Linux kernel resident ACPICA after being well tested. So currently this patch is a no-op. The specific formatted printing APIs are useful to ACPICA as: 1. Some portable applications do not link standard C library, so they cannot use standard formatted print APIs directly. 2. Platform specific printing format may differ and thus not portable, for example, u64 is %ull for Linux kernel and is %uI64 for some MSVC versions. 3. Platform specific printing format may conflict with ACPICA's usages while it is not possible for ACPICA developers to test their code for all platforms. For example, developers may generate %pRxxx while Linux kernel treats %pR as structured resource printing and decodes variable argument as a "struct resource" pointer. This patch solves above issues by introducing the new APIs. Note that users of such APIs are not introduced in this patch. Users of acpi_os_file_vprintf()/acpi_ut_file_printf() need to invoke acpi_os_initialize(), this should be taken care by the further patches where such users are introduced. Lv Zheng. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 09:07:00 +07:00
/*
* utprint - printf/vprintf output functions
*/
const char *acpi_ut_scan_number(const char *string, u64 *number_ptr);
const char *acpi_ut_print_number(char *string, u64 number);
int
acpi_ut_vsnprintf(char *string,
acpi_size size, const char *format, va_list args);
int acpi_ut_snprintf(char *string, acpi_size size, const char *format, ...);
#ifdef ACPI_APPLICATION
int acpi_ut_file_vprintf(ACPI_FILE file, const char *format, va_list args);
int acpi_ut_file_printf(ACPI_FILE file, const char *format, ...);
#endif
/*
* utuuid -- UUID support functions
*/
#if (defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP || defined ACPI_HELP_APP)
void acpi_ut_convert_string_to_uuid(char *in_string, u8 *uuid_buffer);
#endif
#endif /* _ACUTILS_H */