linux_dsm_epyc7002/net/tipc/socket.c

1901 lines
46 KiB
C
Raw Normal View History

/*
* net/tipc/socket.c: TIPC socket API
*
* Copyright (c) 2001-2007, Ericsson AB
* Copyright (c) 2004-2008, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/net.h>
#include <linux/socket.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/poll.h>
#include <linux/fcntl.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/gfp.h>
#include <asm/string.h>
#include <asm/atomic.h>
#include <net/sock.h>
#include <linux/tipc.h>
#include <linux/tipc_config.h>
#include <net/tipc/tipc_msg.h>
#include <net/tipc/tipc_port.h>
#include "core.h"
#define SS_LISTENING -1 /* socket is listening */
#define SS_READY -2 /* socket is connectionless */
#define OVERLOAD_LIMIT_BASE 5000
#define CONN_TIMEOUT_DEFAULT 8000 /* default connect timeout = 8s */
struct tipc_sock {
struct sock sk;
struct tipc_port *p;
struct tipc_portid peer_name;
};
#define tipc_sk(sk) ((struct tipc_sock *)(sk))
#define tipc_sk_port(sk) ((struct tipc_port *)(tipc_sk(sk)->p))
static int backlog_rcv(struct sock *sk, struct sk_buff *skb);
static u32 dispatch(struct tipc_port *tport, struct sk_buff *buf);
static void wakeupdispatch(struct tipc_port *tport);
static const struct proto_ops packet_ops;
static const struct proto_ops stream_ops;
static const struct proto_ops msg_ops;
static struct proto tipc_proto;
static int sockets_enabled = 0;
static atomic_t tipc_queue_size = ATOMIC_INIT(0);
/*
* Revised TIPC socket locking policy:
*
* Most socket operations take the standard socket lock when they start
* and hold it until they finish (or until they need to sleep). Acquiring
* this lock grants the owner exclusive access to the fields of the socket
* data structures, with the exception of the backlog queue. A few socket
* operations can be done without taking the socket lock because they only
* read socket information that never changes during the life of the socket.
*
* Socket operations may acquire the lock for the associated TIPC port if they
* need to perform an operation on the port. If any routine needs to acquire
* both the socket lock and the port lock it must take the socket lock first
* to avoid the risk of deadlock.
*
* The dispatcher handling incoming messages cannot grab the socket lock in
* the standard fashion, since invoked it runs at the BH level and cannot block.
* Instead, it checks to see if the socket lock is currently owned by someone,
* and either handles the message itself or adds it to the socket's backlog
* queue; in the latter case the queued message is processed once the process
* owning the socket lock releases it.
*
* NOTE: Releasing the socket lock while an operation is sleeping overcomes
* the problem of a blocked socket operation preventing any other operations
* from occurring. However, applications must be careful if they have
* multiple threads trying to send (or receive) on the same socket, as these
* operations might interfere with each other. For example, doing a connect
* and a receive at the same time might allow the receive to consume the
* ACK message meant for the connect. While additional work could be done
* to try and overcome this, it doesn't seem to be worthwhile at the present.
*
* NOTE: Releasing the socket lock while an operation is sleeping also ensures
* that another operation that must be performed in a non-blocking manner is
* not delayed for very long because the lock has already been taken.
*
* NOTE: This code assumes that certain fields of a port/socket pair are
* constant over its lifetime; such fields can be examined without taking
* the socket lock and/or port lock, and do not need to be re-read even
* after resuming processing after waiting. These fields include:
* - socket type
* - pointer to socket sk structure (aka tipc_sock structure)
* - pointer to port structure
* - port reference
*/
/**
* advance_rx_queue - discard first buffer in socket receive queue
*
* Caller must hold socket lock
*/
static void advance_rx_queue(struct sock *sk)
{
buf_discard(__skb_dequeue(&sk->sk_receive_queue));
atomic_dec(&tipc_queue_size);
}
/**
* discard_rx_queue - discard all buffers in socket receive queue
*
* Caller must hold socket lock
*/
static void discard_rx_queue(struct sock *sk)
{
struct sk_buff *buf;
while ((buf = __skb_dequeue(&sk->sk_receive_queue))) {
atomic_dec(&tipc_queue_size);
buf_discard(buf);
}
}
/**
* reject_rx_queue - reject all buffers in socket receive queue
*
* Caller must hold socket lock
*/
static void reject_rx_queue(struct sock *sk)
{
struct sk_buff *buf;
while ((buf = __skb_dequeue(&sk->sk_receive_queue))) {
tipc_reject_msg(buf, TIPC_ERR_NO_PORT);
atomic_dec(&tipc_queue_size);
}
}
/**
* tipc_create - create a TIPC socket
* @net: network namespace (must be default network)
* @sock: pre-allocated socket structure
* @protocol: protocol indicator (must be 0)
* @kern: caused by kernel or by userspace?
*
* This routine creates additional data structures used by the TIPC socket,
* initializes them, and links them together.
*
* Returns 0 on success, errno otherwise
*/
static int tipc_create(struct net *net, struct socket *sock, int protocol,
int kern)
{
const struct proto_ops *ops;
socket_state state;
struct sock *sk;
struct tipc_port *tp_ptr;
/* Validate arguments */
if (!net_eq(net, &init_net))
return -EAFNOSUPPORT;
if (unlikely(protocol != 0))
return -EPROTONOSUPPORT;
switch (sock->type) {
case SOCK_STREAM:
ops = &stream_ops;
state = SS_UNCONNECTED;
break;
case SOCK_SEQPACKET:
ops = &packet_ops;
state = SS_UNCONNECTED;
break;
case SOCK_DGRAM:
case SOCK_RDM:
ops = &msg_ops;
state = SS_READY;
break;
default:
return -EPROTOTYPE;
}
/* Allocate socket's protocol area */
sk = sk_alloc(net, AF_TIPC, GFP_KERNEL, &tipc_proto);
if (sk == NULL)
return -ENOMEM;
/* Allocate TIPC port for socket to use */
tp_ptr = tipc_createport_raw(sk, &dispatch, &wakeupdispatch,
TIPC_LOW_IMPORTANCE);
if (unlikely(!tp_ptr)) {
sk_free(sk);
return -ENOMEM;
}
/* Finish initializing socket data structures */
sock->ops = ops;
sock->state = state;
sock_init_data(sock, sk);
sk->sk_rcvtimeo = msecs_to_jiffies(CONN_TIMEOUT_DEFAULT);
sk->sk_backlog_rcv = backlog_rcv;
tipc_sk(sk)->p = tp_ptr;
spin_unlock_bh(tp_ptr->lock);
if (sock->state == SS_READY) {
tipc_set_portunreturnable(tp_ptr->ref, 1);
if (sock->type == SOCK_DGRAM)
tipc_set_portunreliable(tp_ptr->ref, 1);
}
atomic_inc(&tipc_user_count);
return 0;
}
/**
* release - destroy a TIPC socket
* @sock: socket to destroy
*
* This routine cleans up any messages that are still queued on the socket.
* For DGRAM and RDM socket types, all queued messages are rejected.
* For SEQPACKET and STREAM socket types, the first message is rejected
* and any others are discarded. (If the first message on a STREAM socket
* is partially-read, it is discarded and the next one is rejected instead.)
*
* NOTE: Rejected messages are not necessarily returned to the sender! They
* are returned or discarded according to the "destination droppable" setting
* specified for the message by the sender.
*
* Returns 0 on success, errno otherwise
*/
static int release(struct socket *sock)
{
struct sock *sk = sock->sk;
struct tipc_port *tport;
struct sk_buff *buf;
int res;
/*
* Exit if socket isn't fully initialized (occurs when a failed accept()
* releases a pre-allocated child socket that was never used)
*/
if (sk == NULL)
return 0;
tport = tipc_sk_port(sk);
lock_sock(sk);
/*
* Reject all unreceived messages, except on an active connection
* (which disconnects locally & sends a 'FIN+' to peer)
*/
while (sock->state != SS_DISCONNECTING) {
buf = __skb_dequeue(&sk->sk_receive_queue);
if (buf == NULL)
break;
atomic_dec(&tipc_queue_size);
if (TIPC_SKB_CB(buf)->handle != msg_data(buf_msg(buf)))
buf_discard(buf);
else {
if ((sock->state == SS_CONNECTING) ||
(sock->state == SS_CONNECTED)) {
sock->state = SS_DISCONNECTING;
tipc_disconnect(tport->ref);
}
tipc_reject_msg(buf, TIPC_ERR_NO_PORT);
}
}
/*
* Delete TIPC port; this ensures no more messages are queued
* (also disconnects an active connection & sends a 'FIN-' to peer)
*/
res = tipc_deleteport(tport->ref);
/* Discard any remaining (connection-based) messages in receive queue */
discard_rx_queue(sk);
/* Reject any messages that accumulated in backlog queue */
sock->state = SS_DISCONNECTING;
release_sock(sk);
sock_put(sk);
sock->sk = NULL;
atomic_dec(&tipc_user_count);
return res;
}
/**
* bind - associate or disassocate TIPC name(s) with a socket
* @sock: socket structure
* @uaddr: socket address describing name(s) and desired operation
* @uaddr_len: size of socket address data structure
*
* Name and name sequence binding is indicated using a positive scope value;
* a negative scope value unbinds the specified name. Specifying no name
* (i.e. a socket address length of 0) unbinds all names from the socket.
*
* Returns 0 on success, errno otherwise
*
* NOTE: This routine doesn't need to take the socket lock since it doesn't
* access any non-constant socket information.
*/
static int bind(struct socket *sock, struct sockaddr *uaddr, int uaddr_len)
{
struct sockaddr_tipc *addr = (struct sockaddr_tipc *)uaddr;
u32 portref = tipc_sk_port(sock->sk)->ref;
if (unlikely(!uaddr_len))
return tipc_withdraw(portref, 0, NULL);
if (uaddr_len < sizeof(struct sockaddr_tipc))
return -EINVAL;
if (addr->family != AF_TIPC)
return -EAFNOSUPPORT;
if (addr->addrtype == TIPC_ADDR_NAME)
addr->addr.nameseq.upper = addr->addr.nameseq.lower;
else if (addr->addrtype != TIPC_ADDR_NAMESEQ)
return -EAFNOSUPPORT;
return (addr->scope > 0) ?
tipc_publish(portref, addr->scope, &addr->addr.nameseq) :
tipc_withdraw(portref, -addr->scope, &addr->addr.nameseq);
}
/**
* get_name - get port ID of socket or peer socket
* @sock: socket structure
* @uaddr: area for returned socket address
* @uaddr_len: area for returned length of socket address
* @peer: 0 = own ID, 1 = current peer ID, 2 = current/former peer ID
*
* Returns 0 on success, errno otherwise
*
* NOTE: This routine doesn't need to take the socket lock since it only
* accesses socket information that is unchanging (or which changes in
* a completely predictable manner).
*/
static int get_name(struct socket *sock, struct sockaddr *uaddr,
int *uaddr_len, int peer)
{
struct sockaddr_tipc *addr = (struct sockaddr_tipc *)uaddr;
struct tipc_sock *tsock = tipc_sk(sock->sk);
if (peer) {
if ((sock->state != SS_CONNECTED) &&
((peer != 2) || (sock->state != SS_DISCONNECTING)))
return -ENOTCONN;
addr->addr.id.ref = tsock->peer_name.ref;
addr->addr.id.node = tsock->peer_name.node;
} else {
tipc_ownidentity(tsock->p->ref, &addr->addr.id);
}
*uaddr_len = sizeof(*addr);
addr->addrtype = TIPC_ADDR_ID;
addr->family = AF_TIPC;
addr->scope = 0;
addr->addr.name.domain = 0;
return 0;
}
/**
* poll - read and possibly block on pollmask
* @file: file structure associated with the socket
* @sock: socket for which to calculate the poll bits
* @wait: ???
*
* Returns pollmask value
*
* COMMENTARY:
* It appears that the usual socket locking mechanisms are not useful here
* since the pollmask info is potentially out-of-date the moment this routine
* exits. TCP and other protocols seem to rely on higher level poll routines
* to handle any preventable race conditions, so TIPC will do the same ...
*
* TIPC sets the returned events as follows:
* a) POLLRDNORM and POLLIN are set if the socket's receive queue is non-empty
* or if a connection-oriented socket is does not have an active connection
* (i.e. a read operation will not block).
* b) POLLOUT is set except when a socket's connection has been terminated
* (i.e. a write operation will not block).
* c) POLLHUP is set when a socket's connection has been terminated.
*
* IMPORTANT: The fact that a read or write operation will not block does NOT
* imply that the operation will succeed!
*/
static unsigned int poll(struct file *file, struct socket *sock,
poll_table *wait)
{
struct sock *sk = sock->sk;
u32 mask;
poll_wait(file, sk_sleep(sk), wait);
if (!skb_queue_empty(&sk->sk_receive_queue) ||
(sock->state == SS_UNCONNECTED) ||
(sock->state == SS_DISCONNECTING))
mask = (POLLRDNORM | POLLIN);
else
mask = 0;
if (sock->state == SS_DISCONNECTING)
mask |= POLLHUP;
else
mask |= POLLOUT;
return mask;
}
/**
* dest_name_check - verify user is permitted to send to specified port name
* @dest: destination address
* @m: descriptor for message to be sent
*
* Prevents restricted configuration commands from being issued by
* unauthorized users.
*
* Returns 0 if permission is granted, otherwise errno
*/
static int dest_name_check(struct sockaddr_tipc *dest, struct msghdr *m)
{
struct tipc_cfg_msg_hdr hdr;
if (likely(dest->addr.name.name.type >= TIPC_RESERVED_TYPES))
return 0;
if (likely(dest->addr.name.name.type == TIPC_TOP_SRV))
return 0;
if (likely(dest->addr.name.name.type != TIPC_CFG_SRV))
return -EACCES;
if (copy_from_user(&hdr, m->msg_iov[0].iov_base, sizeof(hdr)))
return -EFAULT;
if ((ntohs(hdr.tcm_type) & 0xC000) && (!capable(CAP_NET_ADMIN)))
return -EACCES;
return 0;
}
/**
* send_msg - send message in connectionless manner
* @iocb: if NULL, indicates that socket lock is already held
* @sock: socket structure
* @m: message to send
* @total_len: length of message
*
* Message must have an destination specified explicitly.
* Used for SOCK_RDM and SOCK_DGRAM messages,
* and for 'SYN' messages on SOCK_SEQPACKET and SOCK_STREAM connections.
* (Note: 'SYN+' is prohibited on SOCK_STREAM.)
*
* Returns the number of bytes sent on success, or errno otherwise
*/
static int send_msg(struct kiocb *iocb, struct socket *sock,
struct msghdr *m, size_t total_len)
{
struct sock *sk = sock->sk;
struct tipc_port *tport = tipc_sk_port(sk);
struct sockaddr_tipc *dest = (struct sockaddr_tipc *)m->msg_name;
int needs_conn;
int res = -EINVAL;
if (unlikely(!dest))
return -EDESTADDRREQ;
if (unlikely((m->msg_namelen < sizeof(*dest)) ||
(dest->family != AF_TIPC)))
return -EINVAL;
if (iocb)
lock_sock(sk);
needs_conn = (sock->state != SS_READY);
if (unlikely(needs_conn)) {
if (sock->state == SS_LISTENING) {
res = -EPIPE;
goto exit;
}
if (sock->state != SS_UNCONNECTED) {
res = -EISCONN;
goto exit;
}
if ((tport->published) ||
((sock->type == SOCK_STREAM) && (total_len != 0))) {
res = -EOPNOTSUPP;
goto exit;
}
if (dest->addrtype == TIPC_ADDR_NAME) {
tport->conn_type = dest->addr.name.name.type;
tport->conn_instance = dest->addr.name.name.instance;
}
/* Abort any pending connection attempts (very unlikely) */
reject_rx_queue(sk);
}
do {
if (dest->addrtype == TIPC_ADDR_NAME) {
if ((res = dest_name_check(dest, m)))
break;
res = tipc_send2name(tport->ref,
&dest->addr.name.name,
dest->addr.name.domain,
m->msg_iovlen,
m->msg_iov);
}
else if (dest->addrtype == TIPC_ADDR_ID) {
res = tipc_send2port(tport->ref,
&dest->addr.id,
m->msg_iovlen,
m->msg_iov);
}
else if (dest->addrtype == TIPC_ADDR_MCAST) {
if (needs_conn) {
res = -EOPNOTSUPP;
break;
}
if ((res = dest_name_check(dest, m)))
break;
res = tipc_multicast(tport->ref,
&dest->addr.nameseq,
0,
m->msg_iovlen,
m->msg_iov);
}
if (likely(res != -ELINKCONG)) {
if (needs_conn && (res >= 0)) {
sock->state = SS_CONNECTING;
}
break;
}
if (m->msg_flags & MSG_DONTWAIT) {
res = -EWOULDBLOCK;
break;
}
release_sock(sk);
res = wait_event_interruptible(*sk_sleep(sk),
!tport->congested);
lock_sock(sk);
if (res)
break;
} while (1);
exit:
if (iocb)
release_sock(sk);
return res;
}
/**
* send_packet - send a connection-oriented message
* @iocb: if NULL, indicates that socket lock is already held
* @sock: socket structure
* @m: message to send
* @total_len: length of message
*
* Used for SOCK_SEQPACKET messages and SOCK_STREAM data.
*
* Returns the number of bytes sent on success, or errno otherwise
*/
static int send_packet(struct kiocb *iocb, struct socket *sock,
struct msghdr *m, size_t total_len)
{
struct sock *sk = sock->sk;
struct tipc_port *tport = tipc_sk_port(sk);
struct sockaddr_tipc *dest = (struct sockaddr_tipc *)m->msg_name;
int res;
/* Handle implied connection establishment */
if (unlikely(dest))
return send_msg(iocb, sock, m, total_len);
if (iocb)
lock_sock(sk);
do {
if (unlikely(sock->state != SS_CONNECTED)) {
if (sock->state == SS_DISCONNECTING)
res = -EPIPE;
else
res = -ENOTCONN;
break;
}
res = tipc_send(tport->ref, m->msg_iovlen, m->msg_iov);
if (likely(res != -ELINKCONG)) {
break;
}
if (m->msg_flags & MSG_DONTWAIT) {
res = -EWOULDBLOCK;
break;
}
release_sock(sk);
res = wait_event_interruptible(*sk_sleep(sk),
(!tport->congested || !tport->connected));
lock_sock(sk);
if (res)
break;
} while (1);
if (iocb)
release_sock(sk);
return res;
}
/**
* send_stream - send stream-oriented data
* @iocb: (unused)
* @sock: socket structure
* @m: data to send
* @total_len: total length of data to be sent
*
* Used for SOCK_STREAM data.
*
* Returns the number of bytes sent on success (or partial success),
* or errno if no data sent
*/
static int send_stream(struct kiocb *iocb, struct socket *sock,
struct msghdr *m, size_t total_len)
{
struct sock *sk = sock->sk;
struct tipc_port *tport = tipc_sk_port(sk);
struct msghdr my_msg;
struct iovec my_iov;
struct iovec *curr_iov;
int curr_iovlen;
char __user *curr_start;
u32 hdr_size;
int curr_left;
int bytes_to_send;
int bytes_sent;
int res;
lock_sock(sk);
/* Handle special cases where there is no connection */
if (unlikely(sock->state != SS_CONNECTED)) {
if (sock->state == SS_UNCONNECTED) {
res = send_packet(NULL, sock, m, total_len);
goto exit;
} else if (sock->state == SS_DISCONNECTING) {
res = -EPIPE;
goto exit;
} else {
res = -ENOTCONN;
goto exit;
}
}
if (unlikely(m->msg_name)) {
res = -EISCONN;
goto exit;
}
/*
* Send each iovec entry using one or more messages
*
* Note: This algorithm is good for the most likely case
* (i.e. one large iovec entry), but could be improved to pass sets
* of small iovec entries into send_packet().
*/
curr_iov = m->msg_iov;
curr_iovlen = m->msg_iovlen;
my_msg.msg_iov = &my_iov;
my_msg.msg_iovlen = 1;
my_msg.msg_flags = m->msg_flags;
my_msg.msg_name = NULL;
bytes_sent = 0;
hdr_size = msg_hdr_sz(&tport->phdr);
while (curr_iovlen--) {
curr_start = curr_iov->iov_base;
curr_left = curr_iov->iov_len;
while (curr_left) {
bytes_to_send = tport->max_pkt - hdr_size;
if (bytes_to_send > TIPC_MAX_USER_MSG_SIZE)
bytes_to_send = TIPC_MAX_USER_MSG_SIZE;
if (curr_left < bytes_to_send)
bytes_to_send = curr_left;
my_iov.iov_base = curr_start;
my_iov.iov_len = bytes_to_send;
if ((res = send_packet(NULL, sock, &my_msg, 0)) < 0) {
if (bytes_sent)
res = bytes_sent;
goto exit;
}
curr_left -= bytes_to_send;
curr_start += bytes_to_send;
bytes_sent += bytes_to_send;
}
curr_iov++;
}
res = bytes_sent;
exit:
release_sock(sk);
return res;
}
/**
* auto_connect - complete connection setup to a remote port
* @sock: socket structure
* @msg: peer's response message
*
* Returns 0 on success, errno otherwise
*/
static int auto_connect(struct socket *sock, struct tipc_msg *msg)
{
struct tipc_sock *tsock = tipc_sk(sock->sk);
if (msg_errcode(msg)) {
sock->state = SS_DISCONNECTING;
return -ECONNREFUSED;
}
tsock->peer_name.ref = msg_origport(msg);
tsock->peer_name.node = msg_orignode(msg);
tipc_connect2port(tsock->p->ref, &tsock->peer_name);
tipc_set_portimportance(tsock->p->ref, msg_importance(msg));
sock->state = SS_CONNECTED;
return 0;
}
/**
* set_orig_addr - capture sender's address for received message
* @m: descriptor for message info
* @msg: received message header
*
* Note: Address is not captured if not requested by receiver.
*/
static void set_orig_addr(struct msghdr *m, struct tipc_msg *msg)
{
struct sockaddr_tipc *addr = (struct sockaddr_tipc *)m->msg_name;
if (addr) {
addr->family = AF_TIPC;
addr->addrtype = TIPC_ADDR_ID;
addr->addr.id.ref = msg_origport(msg);
addr->addr.id.node = msg_orignode(msg);
addr->addr.name.domain = 0; /* could leave uninitialized */
addr->scope = 0; /* could leave uninitialized */
m->msg_namelen = sizeof(struct sockaddr_tipc);
}
}
/**
* anc_data_recv - optionally capture ancillary data for received message
* @m: descriptor for message info
* @msg: received message header
* @tport: TIPC port associated with message
*
* Note: Ancillary data is not captured if not requested by receiver.
*
* Returns 0 if successful, otherwise errno
*/
static int anc_data_recv(struct msghdr *m, struct tipc_msg *msg,
struct tipc_port *tport)
{
u32 anc_data[3];
u32 err;
u32 dest_type;
int has_name;
int res;
if (likely(m->msg_controllen == 0))
return 0;
/* Optionally capture errored message object(s) */
err = msg ? msg_errcode(msg) : 0;
if (unlikely(err)) {
anc_data[0] = err;
anc_data[1] = msg_data_sz(msg);
if ((res = put_cmsg(m, SOL_TIPC, TIPC_ERRINFO, 8, anc_data)))
return res;
if (anc_data[1] &&
(res = put_cmsg(m, SOL_TIPC, TIPC_RETDATA, anc_data[1],
msg_data(msg))))
return res;
}
/* Optionally capture message destination object */
dest_type = msg ? msg_type(msg) : TIPC_DIRECT_MSG;
switch (dest_type) {
case TIPC_NAMED_MSG:
has_name = 1;
anc_data[0] = msg_nametype(msg);
anc_data[1] = msg_namelower(msg);
anc_data[2] = msg_namelower(msg);
break;
case TIPC_MCAST_MSG:
has_name = 1;
anc_data[0] = msg_nametype(msg);
anc_data[1] = msg_namelower(msg);
anc_data[2] = msg_nameupper(msg);
break;
case TIPC_CONN_MSG:
has_name = (tport->conn_type != 0);
anc_data[0] = tport->conn_type;
anc_data[1] = tport->conn_instance;
anc_data[2] = tport->conn_instance;
break;
default:
has_name = 0;
}
if (has_name &&
(res = put_cmsg(m, SOL_TIPC, TIPC_DESTNAME, 12, anc_data)))
return res;
return 0;
}
/**
* recv_msg - receive packet-oriented message
* @iocb: (unused)
* @m: descriptor for message info
* @buf_len: total size of user buffer area
* @flags: receive flags
*
* Used for SOCK_DGRAM, SOCK_RDM, and SOCK_SEQPACKET messages.
* If the complete message doesn't fit in user area, truncate it.
*
* Returns size of returned message data, errno otherwise
*/
static int recv_msg(struct kiocb *iocb, struct socket *sock,
struct msghdr *m, size_t buf_len, int flags)
{
struct sock *sk = sock->sk;
struct tipc_port *tport = tipc_sk_port(sk);
struct sk_buff *buf;
struct tipc_msg *msg;
unsigned int sz;
u32 err;
int res;
/* Catch invalid receive requests */
if (m->msg_iovlen != 1)
return -EOPNOTSUPP; /* Don't do multiple iovec entries yet */
if (unlikely(!buf_len))
return -EINVAL;
lock_sock(sk);
if (unlikely(sock->state == SS_UNCONNECTED)) {
res = -ENOTCONN;
goto exit;
}
restart:
/* Look for a message in receive queue; wait if necessary */
while (skb_queue_empty(&sk->sk_receive_queue)) {
if (sock->state == SS_DISCONNECTING) {
res = -ENOTCONN;
goto exit;
}
if (flags & MSG_DONTWAIT) {
res = -EWOULDBLOCK;
goto exit;
}
release_sock(sk);
res = wait_event_interruptible(*sk_sleep(sk),
(!skb_queue_empty(&sk->sk_receive_queue) ||
(sock->state == SS_DISCONNECTING)));
lock_sock(sk);
if (res)
goto exit;
}
/* Look at first message in receive queue */
buf = skb_peek(&sk->sk_receive_queue);
msg = buf_msg(buf);
sz = msg_data_sz(msg);
err = msg_errcode(msg);
/* Complete connection setup for an implied connect */
if (unlikely(sock->state == SS_CONNECTING)) {
res = auto_connect(sock, msg);
if (res)
goto exit;
}
/* Discard an empty non-errored message & try again */
if ((!sz) && (!err)) {
advance_rx_queue(sk);
goto restart;
}
/* Capture sender's address (optional) */
set_orig_addr(m, msg);
/* Capture ancillary data (optional) */
res = anc_data_recv(m, msg, tport);
if (res)
goto exit;
/* Capture message data (if valid) & compute return value (always) */
if (!err) {
if (unlikely(buf_len < sz)) {
sz = buf_len;
m->msg_flags |= MSG_TRUNC;
}
if (unlikely(copy_to_user(m->msg_iov->iov_base, msg_data(msg),
sz))) {
res = -EFAULT;
goto exit;
}
res = sz;
} else {
if ((sock->state == SS_READY) ||
((err == TIPC_CONN_SHUTDOWN) || m->msg_control))
res = 0;
else
res = -ECONNRESET;
}
/* Consume received message (optional) */
if (likely(!(flags & MSG_PEEK))) {
if ((sock->state != SS_READY) &&
(++tport->conn_unacked >= TIPC_FLOW_CONTROL_WIN))
tipc_acknowledge(tport->ref, tport->conn_unacked);
advance_rx_queue(sk);
}
exit:
release_sock(sk);
return res;
}
/**
* recv_stream - receive stream-oriented data
* @iocb: (unused)
* @m: descriptor for message info
* @buf_len: total size of user buffer area
* @flags: receive flags
*
* Used for SOCK_STREAM messages only. If not enough data is available
* will optionally wait for more; never truncates data.
*
* Returns size of returned message data, errno otherwise
*/
static int recv_stream(struct kiocb *iocb, struct socket *sock,
struct msghdr *m, size_t buf_len, int flags)
{
struct sock *sk = sock->sk;
struct tipc_port *tport = tipc_sk_port(sk);
struct sk_buff *buf;
struct tipc_msg *msg;
unsigned int sz;
int sz_to_copy;
int sz_copied = 0;
int needed;
char __user *crs = m->msg_iov->iov_base;
unsigned char *buf_crs;
u32 err;
int res = 0;
/* Catch invalid receive attempts */
if (m->msg_iovlen != 1)
return -EOPNOTSUPP; /* Don't do multiple iovec entries yet */
if (unlikely(!buf_len))
return -EINVAL;
lock_sock(sk);
if (unlikely((sock->state == SS_UNCONNECTED) ||
(sock->state == SS_CONNECTING))) {
res = -ENOTCONN;
goto exit;
}
restart:
/* Look for a message in receive queue; wait if necessary */
while (skb_queue_empty(&sk->sk_receive_queue)) {
if (sock->state == SS_DISCONNECTING) {
res = -ENOTCONN;
goto exit;
}
if (flags & MSG_DONTWAIT) {
res = -EWOULDBLOCK;
goto exit;
}
release_sock(sk);
res = wait_event_interruptible(*sk_sleep(sk),
(!skb_queue_empty(&sk->sk_receive_queue) ||
(sock->state == SS_DISCONNECTING)));
lock_sock(sk);
if (res)
goto exit;
}
/* Look at first message in receive queue */
buf = skb_peek(&sk->sk_receive_queue);
msg = buf_msg(buf);
sz = msg_data_sz(msg);
err = msg_errcode(msg);
/* Discard an empty non-errored message & try again */
if ((!sz) && (!err)) {
advance_rx_queue(sk);
goto restart;
}
/* Optionally capture sender's address & ancillary data of first msg */
if (sz_copied == 0) {
set_orig_addr(m, msg);
res = anc_data_recv(m, msg, tport);
if (res)
goto exit;
}
/* Capture message data (if valid) & compute return value (always) */
if (!err) {
buf_crs = (unsigned char *)(TIPC_SKB_CB(buf)->handle);
sz = (unsigned char *)msg + msg_size(msg) - buf_crs;
needed = (buf_len - sz_copied);
sz_to_copy = (sz <= needed) ? sz : needed;
if (unlikely(copy_to_user(crs, buf_crs, sz_to_copy))) {
res = -EFAULT;
goto exit;
}
sz_copied += sz_to_copy;
if (sz_to_copy < sz) {
if (!(flags & MSG_PEEK))
TIPC_SKB_CB(buf)->handle = buf_crs + sz_to_copy;
goto exit;
}
crs += sz_to_copy;
} else {
if (sz_copied != 0)
goto exit; /* can't add error msg to valid data */
if ((err == TIPC_CONN_SHUTDOWN) || m->msg_control)
res = 0;
else
res = -ECONNRESET;
}
/* Consume received message (optional) */
if (likely(!(flags & MSG_PEEK))) {
if (unlikely(++tport->conn_unacked >= TIPC_FLOW_CONTROL_WIN))
tipc_acknowledge(tport->ref, tport->conn_unacked);
advance_rx_queue(sk);
}
/* Loop around if more data is required */
if ((sz_copied < buf_len) && /* didn't get all requested data */
(!skb_queue_empty(&sk->sk_receive_queue) ||
(flags & MSG_WAITALL)) && /* and more is ready or required */
(!(flags & MSG_PEEK)) && /* and aren't just peeking at data */
(!err)) /* and haven't reached a FIN */
goto restart;
exit:
release_sock(sk);
return sz_copied ? sz_copied : res;
}
/**
* rx_queue_full - determine if receive queue can accept another message
* @msg: message to be added to queue
* @queue_size: current size of queue
* @base: nominal maximum size of queue
*
* Returns 1 if queue is unable to accept message, 0 otherwise
*/
static int rx_queue_full(struct tipc_msg *msg, u32 queue_size, u32 base)
{
u32 threshold;
u32 imp = msg_importance(msg);
if (imp == TIPC_LOW_IMPORTANCE)
threshold = base;
else if (imp == TIPC_MEDIUM_IMPORTANCE)
threshold = base * 2;
else if (imp == TIPC_HIGH_IMPORTANCE)
threshold = base * 100;
else
return 0;
if (msg_connected(msg))
threshold *= 4;
return (queue_size >= threshold);
}
/**
* filter_rcv - validate incoming message
* @sk: socket
* @buf: message
*
* Enqueues message on receive queue if acceptable; optionally handles
* disconnect indication for a connected socket.
*
* Called with socket lock already taken; port lock may also be taken.
*
* Returns TIPC error status code (TIPC_OK if message is not to be rejected)
*/
static u32 filter_rcv(struct sock *sk, struct sk_buff *buf)
{
struct socket *sock = sk->sk_socket;
struct tipc_msg *msg = buf_msg(buf);
u32 recv_q_len;
/* Reject message if it is wrong sort of message for socket */
/*
* WOULD IT BE BETTER TO JUST DISCARD THESE MESSAGES INSTEAD?
* "NO PORT" ISN'T REALLY THE RIGHT ERROR CODE, AND THERE MAY
* BE SECURITY IMPLICATIONS INHERENT IN REJECTING INVALID TRAFFIC
*/
if (sock->state == SS_READY) {
if (msg_connected(msg)) {
msg_dbg(msg, "dispatch filter 1\n");
return TIPC_ERR_NO_PORT;
}
} else {
if (msg_mcast(msg)) {
msg_dbg(msg, "dispatch filter 2\n");
return TIPC_ERR_NO_PORT;
}
if (sock->state == SS_CONNECTED) {
if (!msg_connected(msg)) {
msg_dbg(msg, "dispatch filter 3\n");
return TIPC_ERR_NO_PORT;
}
}
else if (sock->state == SS_CONNECTING) {
if (!msg_connected(msg) && (msg_errcode(msg) == 0)) {
msg_dbg(msg, "dispatch filter 4\n");
return TIPC_ERR_NO_PORT;
}
}
else if (sock->state == SS_LISTENING) {
if (msg_connected(msg) || msg_errcode(msg)) {
msg_dbg(msg, "dispatch filter 5\n");
return TIPC_ERR_NO_PORT;
}
}
else if (sock->state == SS_DISCONNECTING) {
msg_dbg(msg, "dispatch filter 6\n");
return TIPC_ERR_NO_PORT;
}
else /* (sock->state == SS_UNCONNECTED) */ {
if (msg_connected(msg) || msg_errcode(msg)) {
msg_dbg(msg, "dispatch filter 7\n");
return TIPC_ERR_NO_PORT;
}
}
}
/* Reject message if there isn't room to queue it */
recv_q_len = (u32)atomic_read(&tipc_queue_size);
if (unlikely(recv_q_len >= OVERLOAD_LIMIT_BASE)) {
if (rx_queue_full(msg, recv_q_len, OVERLOAD_LIMIT_BASE))
return TIPC_ERR_OVERLOAD;
}
recv_q_len = skb_queue_len(&sk->sk_receive_queue);
if (unlikely(recv_q_len >= (OVERLOAD_LIMIT_BASE / 2))) {
if (rx_queue_full(msg, recv_q_len, OVERLOAD_LIMIT_BASE / 2))
return TIPC_ERR_OVERLOAD;
}
/* Enqueue message (finally!) */
msg_dbg(msg, "<DISP<: ");
TIPC_SKB_CB(buf)->handle = msg_data(msg);
atomic_inc(&tipc_queue_size);
__skb_queue_tail(&sk->sk_receive_queue, buf);
/* Initiate connection termination for an incoming 'FIN' */
if (unlikely(msg_errcode(msg) && (sock->state == SS_CONNECTED))) {
sock->state = SS_DISCONNECTING;
tipc_disconnect_port(tipc_sk_port(sk));
}
if (waitqueue_active(sk_sleep(sk)))
wake_up_interruptible(sk_sleep(sk));
return TIPC_OK;
}
/**
* backlog_rcv - handle incoming message from backlog queue
* @sk: socket
* @buf: message
*
* Caller must hold socket lock, but not port lock.
*
* Returns 0
*/
static int backlog_rcv(struct sock *sk, struct sk_buff *buf)
{
u32 res;
res = filter_rcv(sk, buf);
if (res)
tipc_reject_msg(buf, res);
return 0;
}
/**
* dispatch - handle incoming message
* @tport: TIPC port that received message
* @buf: message
*
* Called with port lock already taken.
*
* Returns TIPC error status code (TIPC_OK if message is not to be rejected)
*/
static u32 dispatch(struct tipc_port *tport, struct sk_buff *buf)
{
struct sock *sk = (struct sock *)tport->usr_handle;
u32 res;
/*
* Process message if socket is unlocked; otherwise add to backlog queue
*
* This code is based on sk_receive_skb(), but must be distinct from it
* since a TIPC-specific filter/reject mechanism is utilized
*/
bh_lock_sock(sk);
if (!sock_owned_by_user(sk)) {
res = filter_rcv(sk, buf);
} else {
if (sk_add_backlog(sk, buf))
res = TIPC_ERR_OVERLOAD;
else
res = TIPC_OK;
}
bh_unlock_sock(sk);
return res;
}
/**
* wakeupdispatch - wake up port after congestion
* @tport: port to wakeup
*
* Called with port lock already taken.
*/
static void wakeupdispatch(struct tipc_port *tport)
{
struct sock *sk = (struct sock *)tport->usr_handle;
if (waitqueue_active(sk_sleep(sk)))
wake_up_interruptible(sk_sleep(sk));
}
/**
* connect - establish a connection to another TIPC port
* @sock: socket structure
* @dest: socket address for destination port
* @destlen: size of socket address data structure
* @flags: file-related flags associated with socket
*
* Returns 0 on success, errno otherwise
*/
static int connect(struct socket *sock, struct sockaddr *dest, int destlen,
int flags)
{
struct sock *sk = sock->sk;
struct sockaddr_tipc *dst = (struct sockaddr_tipc *)dest;
struct msghdr m = {NULL,};
struct sk_buff *buf;
struct tipc_msg *msg;
int res;
lock_sock(sk);
/* For now, TIPC does not allow use of connect() with DGRAM/RDM types */
if (sock->state == SS_READY) {
res = -EOPNOTSUPP;
goto exit;
}
/* For now, TIPC does not support the non-blocking form of connect() */
if (flags & O_NONBLOCK) {
res = -EWOULDBLOCK;
goto exit;
}
/* Issue Posix-compliant error code if socket is in the wrong state */
if (sock->state == SS_LISTENING) {
res = -EOPNOTSUPP;
goto exit;
}
if (sock->state == SS_CONNECTING) {
res = -EALREADY;
goto exit;
}
if (sock->state != SS_UNCONNECTED) {
res = -EISCONN;
goto exit;
}
/*
* Reject connection attempt using multicast address
*
* Note: send_msg() validates the rest of the address fields,
* so there's no need to do it here
*/
if (dst->addrtype == TIPC_ADDR_MCAST) {
res = -EINVAL;
goto exit;
}
/* Reject any messages already in receive queue (very unlikely) */
reject_rx_queue(sk);
/* Send a 'SYN-' to destination */
m.msg_name = dest;
m.msg_namelen = destlen;
res = send_msg(NULL, sock, &m, 0);
if (res < 0) {
goto exit;
}
/* Wait until an 'ACK' or 'RST' arrives, or a timeout occurs */
release_sock(sk);
res = wait_event_interruptible_timeout(*sk_sleep(sk),
(!skb_queue_empty(&sk->sk_receive_queue) ||
(sock->state != SS_CONNECTING)),
sk->sk_rcvtimeo);
lock_sock(sk);
if (res > 0) {
buf = skb_peek(&sk->sk_receive_queue);
if (buf != NULL) {
msg = buf_msg(buf);
res = auto_connect(sock, msg);
if (!res) {
if (!msg_data_sz(msg))
advance_rx_queue(sk);
}
} else {
if (sock->state == SS_CONNECTED) {
res = -EISCONN;
} else {
res = -ECONNREFUSED;
}
}
} else {
if (res == 0)
res = -ETIMEDOUT;
else
; /* leave "res" unchanged */
sock->state = SS_DISCONNECTING;
}
exit:
release_sock(sk);
return res;
}
/**
* listen - allow socket to listen for incoming connections
* @sock: socket structure
* @len: (unused)
*
* Returns 0 on success, errno otherwise
*/
static int listen(struct socket *sock, int len)
{
struct sock *sk = sock->sk;
int res;
lock_sock(sk);
if (sock->state == SS_READY)
res = -EOPNOTSUPP;
else if (sock->state != SS_UNCONNECTED)
res = -EINVAL;
else {
sock->state = SS_LISTENING;
res = 0;
}
release_sock(sk);
return res;
}
/**
* accept - wait for connection request
* @sock: listening socket
* @newsock: new socket that is to be connected
* @flags: file-related flags associated with socket
*
* Returns 0 on success, errno otherwise
*/
static int accept(struct socket *sock, struct socket *new_sock, int flags)
{
struct sock *sk = sock->sk;
struct sk_buff *buf;
int res;
lock_sock(sk);
if (sock->state == SS_READY) {
res = -EOPNOTSUPP;
goto exit;
}
if (sock->state != SS_LISTENING) {
res = -EINVAL;
goto exit;
}
while (skb_queue_empty(&sk->sk_receive_queue)) {
if (flags & O_NONBLOCK) {
res = -EWOULDBLOCK;
goto exit;
}
release_sock(sk);
res = wait_event_interruptible(*sk_sleep(sk),
(!skb_queue_empty(&sk->sk_receive_queue)));
lock_sock(sk);
if (res)
goto exit;
}
buf = skb_peek(&sk->sk_receive_queue);
res = tipc_create(sock_net(sock->sk), new_sock, 0, 0);
if (!res) {
struct sock *new_sk = new_sock->sk;
struct tipc_sock *new_tsock = tipc_sk(new_sk);
struct tipc_port *new_tport = new_tsock->p;
u32 new_ref = new_tport->ref;
struct tipc_msg *msg = buf_msg(buf);
lock_sock(new_sk);
/*
* Reject any stray messages received by new socket
* before the socket lock was taken (very, very unlikely)
*/
reject_rx_queue(new_sk);
/* Connect new socket to it's peer */
new_tsock->peer_name.ref = msg_origport(msg);
new_tsock->peer_name.node = msg_orignode(msg);
tipc_connect2port(new_ref, &new_tsock->peer_name);
new_sock->state = SS_CONNECTED;
tipc_set_portimportance(new_ref, msg_importance(msg));
if (msg_named(msg)) {
new_tport->conn_type = msg_nametype(msg);
new_tport->conn_instance = msg_nameinst(msg);
}
/*
* Respond to 'SYN-' by discarding it & returning 'ACK'-.
* Respond to 'SYN+' by queuing it on new socket.
*/
msg_dbg(msg,"<ACC<: ");
if (!msg_data_sz(msg)) {
struct msghdr m = {NULL,};
advance_rx_queue(sk);
send_packet(NULL, new_sock, &m, 0);
} else {
__skb_dequeue(&sk->sk_receive_queue);
__skb_queue_head(&new_sk->sk_receive_queue, buf);
}
release_sock(new_sk);
}
exit:
release_sock(sk);
return res;
}
/**
* shutdown - shutdown socket connection
* @sock: socket structure
* @how: direction to close (must be SHUT_RDWR)
*
* Terminates connection (if necessary), then purges socket's receive queue.
*
* Returns 0 on success, errno otherwise
*/
static int shutdown(struct socket *sock, int how)
{
struct sock *sk = sock->sk;
struct tipc_port *tport = tipc_sk_port(sk);
struct sk_buff *buf;
int res;
if (how != SHUT_RDWR)
return -EINVAL;
lock_sock(sk);
switch (sock->state) {
case SS_CONNECTING:
case SS_CONNECTED:
/* Disconnect and send a 'FIN+' or 'FIN-' message to peer */
restart:
buf = __skb_dequeue(&sk->sk_receive_queue);
if (buf) {
atomic_dec(&tipc_queue_size);
if (TIPC_SKB_CB(buf)->handle != msg_data(buf_msg(buf))) {
buf_discard(buf);
goto restart;
}
tipc_disconnect(tport->ref);
tipc_reject_msg(buf, TIPC_CONN_SHUTDOWN);
} else {
tipc_shutdown(tport->ref);
}
sock->state = SS_DISCONNECTING;
/* fall through */
case SS_DISCONNECTING:
/* Discard any unreceived messages; wake up sleeping tasks */
discard_rx_queue(sk);
if (waitqueue_active(sk_sleep(sk)))
wake_up_interruptible(sk_sleep(sk));
res = 0;
break;
default:
res = -ENOTCONN;
}
release_sock(sk);
return res;
}
/**
* setsockopt - set socket option
* @sock: socket structure
* @lvl: option level
* @opt: option identifier
* @ov: pointer to new option value
* @ol: length of option value
*
* For stream sockets only, accepts and ignores all IPPROTO_TCP options
* (to ease compatibility).
*
* Returns 0 on success, errno otherwise
*/
static int setsockopt(struct socket *sock,
int lvl, int opt, char __user *ov, unsigned int ol)
{
struct sock *sk = sock->sk;
struct tipc_port *tport = tipc_sk_port(sk);
u32 value;
int res;
if ((lvl == IPPROTO_TCP) && (sock->type == SOCK_STREAM))
return 0;
if (lvl != SOL_TIPC)
return -ENOPROTOOPT;
if (ol < sizeof(value))
return -EINVAL;
if ((res = get_user(value, (u32 __user *)ov)))
return res;
lock_sock(sk);
switch (opt) {
case TIPC_IMPORTANCE:
res = tipc_set_portimportance(tport->ref, value);
break;
case TIPC_SRC_DROPPABLE:
if (sock->type != SOCK_STREAM)
res = tipc_set_portunreliable(tport->ref, value);
else
res = -ENOPROTOOPT;
break;
case TIPC_DEST_DROPPABLE:
res = tipc_set_portunreturnable(tport->ref, value);
break;
case TIPC_CONN_TIMEOUT:
sk->sk_rcvtimeo = msecs_to_jiffies(value);
/* no need to set "res", since already 0 at this point */
break;
default:
res = -EINVAL;
}
release_sock(sk);
return res;
}
/**
* getsockopt - get socket option
* @sock: socket structure
* @lvl: option level
* @opt: option identifier
* @ov: receptacle for option value
* @ol: receptacle for length of option value
*
* For stream sockets only, returns 0 length result for all IPPROTO_TCP options
* (to ease compatibility).
*
* Returns 0 on success, errno otherwise
*/
static int getsockopt(struct socket *sock,
int lvl, int opt, char __user *ov, int __user *ol)
{
struct sock *sk = sock->sk;
struct tipc_port *tport = tipc_sk_port(sk);
int len;
u32 value;
int res;
if ((lvl == IPPROTO_TCP) && (sock->type == SOCK_STREAM))
return put_user(0, ol);
if (lvl != SOL_TIPC)
return -ENOPROTOOPT;
if ((res = get_user(len, ol)))
return res;
lock_sock(sk);
switch (opt) {
case TIPC_IMPORTANCE:
res = tipc_portimportance(tport->ref, &value);
break;
case TIPC_SRC_DROPPABLE:
res = tipc_portunreliable(tport->ref, &value);
break;
case TIPC_DEST_DROPPABLE:
res = tipc_portunreturnable(tport->ref, &value);
break;
case TIPC_CONN_TIMEOUT:
value = jiffies_to_msecs(sk->sk_rcvtimeo);
/* no need to set "res", since already 0 at this point */
break;
case TIPC_NODE_RECVQ_DEPTH:
value = (u32)atomic_read(&tipc_queue_size);
break;
case TIPC_SOCK_RECVQ_DEPTH:
value = skb_queue_len(&sk->sk_receive_queue);
break;
default:
res = -EINVAL;
}
release_sock(sk);
if (res) {
/* "get" failed */
}
else if (len < sizeof(value)) {
res = -EINVAL;
}
else if (copy_to_user(ov, &value, sizeof(value))) {
res = -EFAULT;
}
else {
res = put_user(sizeof(value), ol);
}
return res;
}
/**
* Protocol switches for the various types of TIPC sockets
*/
static const struct proto_ops msg_ops = {
.owner = THIS_MODULE,
.family = AF_TIPC,
.release = release,
.bind = bind,
.connect = connect,
.socketpair = sock_no_socketpair,
.accept = accept,
.getname = get_name,
.poll = poll,
.ioctl = sock_no_ioctl,
.listen = listen,
.shutdown = shutdown,
.setsockopt = setsockopt,
.getsockopt = getsockopt,
.sendmsg = send_msg,
.recvmsg = recv_msg,
.mmap = sock_no_mmap,
.sendpage = sock_no_sendpage
};
static const struct proto_ops packet_ops = {
.owner = THIS_MODULE,
.family = AF_TIPC,
.release = release,
.bind = bind,
.connect = connect,
.socketpair = sock_no_socketpair,
.accept = accept,
.getname = get_name,
.poll = poll,
.ioctl = sock_no_ioctl,
.listen = listen,
.shutdown = shutdown,
.setsockopt = setsockopt,
.getsockopt = getsockopt,
.sendmsg = send_packet,
.recvmsg = recv_msg,
.mmap = sock_no_mmap,
.sendpage = sock_no_sendpage
};
static const struct proto_ops stream_ops = {
.owner = THIS_MODULE,
.family = AF_TIPC,
.release = release,
.bind = bind,
.connect = connect,
.socketpair = sock_no_socketpair,
.accept = accept,
.getname = get_name,
.poll = poll,
.ioctl = sock_no_ioctl,
.listen = listen,
.shutdown = shutdown,
.setsockopt = setsockopt,
.getsockopt = getsockopt,
.sendmsg = send_stream,
.recvmsg = recv_stream,
.mmap = sock_no_mmap,
.sendpage = sock_no_sendpage
};
static const struct net_proto_family tipc_family_ops = {
.owner = THIS_MODULE,
.family = AF_TIPC,
.create = tipc_create
};
static struct proto tipc_proto = {
.name = "TIPC",
.owner = THIS_MODULE,
.obj_size = sizeof(struct tipc_sock)
};
/**
* tipc_socket_init - initialize TIPC socket interface
*
* Returns 0 on success, errno otherwise
*/
int tipc_socket_init(void)
{
int res;
res = proto_register(&tipc_proto, 1);
if (res) {
err("Failed to register TIPC protocol type\n");
goto out;
}
res = sock_register(&tipc_family_ops);
if (res) {
err("Failed to register TIPC socket type\n");
proto_unregister(&tipc_proto);
goto out;
}
sockets_enabled = 1;
out:
return res;
}
/**
* tipc_socket_stop - stop TIPC socket interface
*/
void tipc_socket_stop(void)
{
if (!sockets_enabled)
return;
sockets_enabled = 0;
sock_unregister(tipc_family_ops.family);
proto_unregister(&tipc_proto);
}