linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_pm.c

7344 lines
206 KiB
C
Raw Normal View History

/*
* Copyright © 2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eugeni Dodonov <eugeni.dodonov@intel.com>
*
*/
#include <linux/cpufreq.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include "../../../platform/x86/intel_ips.h"
#include <linux/module.h>
/**
* DOC: RC6
*
* RC6 is a special power stage which allows the GPU to enter an very
* low-voltage mode when idle, using down to 0V while at this stage. This
* stage is entered automatically when the GPU is idle when RC6 support is
* enabled, and as soon as new workload arises GPU wakes up automatically as well.
*
* There are different RC6 modes available in Intel GPU, which differentiate
* among each other with the latency required to enter and leave RC6 and
* voltage consumed by the GPU in different states.
*
* The combination of the following flags define which states GPU is allowed
* to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and
* RC6pp is deepest RC6. Their support by hardware varies according to the
* GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one
* which brings the most power savings; deeper states save more power, but
* require higher latency to switch to and wake up.
*/
#define INTEL_RC6_ENABLE (1<<0)
#define INTEL_RC6p_ENABLE (1<<1)
#define INTEL_RC6pp_ENABLE (1<<2)
static void bxt_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* WaDisableSDEUnitClockGating:bxt */
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
/*
* FIXME:
* GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ applies on 3x6 GT SKUs only.
*/
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ);
/*
* Wa: Backlight PWM may stop in the asserted state, causing backlight
* to stay fully on.
*/
if (IS_BXT_REVID(dev_priv, BXT_REVID_B0, REVID_FOREVER))
I915_WRITE(GEN9_CLKGATE_DIS_0, I915_READ(GEN9_CLKGATE_DIS_0) |
PWM1_GATING_DIS | PWM2_GATING_DIS);
}
static void i915_pineview_get_mem_freq(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp;
tmp = I915_READ(CLKCFG);
switch (tmp & CLKCFG_FSB_MASK) {
case CLKCFG_FSB_533:
dev_priv->fsb_freq = 533; /* 133*4 */
break;
case CLKCFG_FSB_800:
dev_priv->fsb_freq = 800; /* 200*4 */
break;
case CLKCFG_FSB_667:
dev_priv->fsb_freq = 667; /* 167*4 */
break;
case CLKCFG_FSB_400:
dev_priv->fsb_freq = 400; /* 100*4 */
break;
}
switch (tmp & CLKCFG_MEM_MASK) {
case CLKCFG_MEM_533:
dev_priv->mem_freq = 533;
break;
case CLKCFG_MEM_667:
dev_priv->mem_freq = 667;
break;
case CLKCFG_MEM_800:
dev_priv->mem_freq = 800;
break;
}
/* detect pineview DDR3 setting */
tmp = I915_READ(CSHRDDR3CTL);
dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
}
static void i915_ironlake_get_mem_freq(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u16 ddrpll, csipll;
ddrpll = I915_READ16(DDRMPLL1);
csipll = I915_READ16(CSIPLL0);
switch (ddrpll & 0xff) {
case 0xc:
dev_priv->mem_freq = 800;
break;
case 0x10:
dev_priv->mem_freq = 1066;
break;
case 0x14:
dev_priv->mem_freq = 1333;
break;
case 0x18:
dev_priv->mem_freq = 1600;
break;
default:
DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
ddrpll & 0xff);
dev_priv->mem_freq = 0;
break;
}
dev_priv->ips.r_t = dev_priv->mem_freq;
switch (csipll & 0x3ff) {
case 0x00c:
dev_priv->fsb_freq = 3200;
break;
case 0x00e:
dev_priv->fsb_freq = 3733;
break;
case 0x010:
dev_priv->fsb_freq = 4266;
break;
case 0x012:
dev_priv->fsb_freq = 4800;
break;
case 0x014:
dev_priv->fsb_freq = 5333;
break;
case 0x016:
dev_priv->fsb_freq = 5866;
break;
case 0x018:
dev_priv->fsb_freq = 6400;
break;
default:
DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
csipll & 0x3ff);
dev_priv->fsb_freq = 0;
break;
}
if (dev_priv->fsb_freq == 3200) {
dev_priv->ips.c_m = 0;
} else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
dev_priv->ips.c_m = 1;
} else {
dev_priv->ips.c_m = 2;
}
}
static const struct cxsr_latency cxsr_latency_table[] = {
{1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
{1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
{1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
{1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */
{1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */
{1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
{1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
{1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
{1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */
{1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */
{1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
{1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
{1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
{1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */
{1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */
{0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
{0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
{0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
{0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */
{0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */
{0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
{0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
{0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
{0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */
{0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */
{0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
{0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
{0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
{0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */
{0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */
};
static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
int is_ddr3,
int fsb,
int mem)
{
const struct cxsr_latency *latency;
int i;
if (fsb == 0 || mem == 0)
return NULL;
for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
latency = &cxsr_latency_table[i];
if (is_desktop == latency->is_desktop &&
is_ddr3 == latency->is_ddr3 &&
fsb == latency->fsb_freq && mem == latency->mem_freq)
return latency;
}
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
return NULL;
}
static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable)
{
u32 val;
mutex_lock(&dev_priv->rps.hw_lock);
val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
if (enable)
val &= ~FORCE_DDR_HIGH_FREQ;
else
val |= FORCE_DDR_HIGH_FREQ;
val &= ~FORCE_DDR_LOW_FREQ;
val |= FORCE_DDR_FREQ_REQ_ACK;
vlv_punit_write(dev_priv, PUNIT_REG_DDR_SETUP2, val);
if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2) &
FORCE_DDR_FREQ_REQ_ACK) == 0, 3))
DRM_ERROR("timed out waiting for Punit DDR DVFS request\n");
mutex_unlock(&dev_priv->rps.hw_lock);
}
static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable)
{
u32 val;
mutex_lock(&dev_priv->rps.hw_lock);
val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
if (enable)
val |= DSP_MAXFIFO_PM5_ENABLE;
else
val &= ~DSP_MAXFIFO_PM5_ENABLE;
vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
mutex_unlock(&dev_priv->rps.hw_lock);
}
#define FW_WM(value, plane) \
(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK)
void intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
{
struct drm_device *dev = dev_priv->dev;
u32 val;
if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
I915_WRITE(FW_BLC_SELF_VLV, enable ? FW_CSPWRDWNEN : 0);
POSTING_READ(FW_BLC_SELF_VLV);
dev_priv->wm.vlv.cxsr = enable;
} else if (IS_G4X(dev) || IS_CRESTLINE(dev)) {
I915_WRITE(FW_BLC_SELF, enable ? FW_BLC_SELF_EN : 0);
POSTING_READ(FW_BLC_SELF);
} else if (IS_PINEVIEW(dev)) {
val = I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN;
val |= enable ? PINEVIEW_SELF_REFRESH_EN : 0;
I915_WRITE(DSPFW3, val);
POSTING_READ(DSPFW3);
} else if (IS_I945G(dev) || IS_I945GM(dev)) {
val = enable ? _MASKED_BIT_ENABLE(FW_BLC_SELF_EN) :
_MASKED_BIT_DISABLE(FW_BLC_SELF_EN);
I915_WRITE(FW_BLC_SELF, val);
POSTING_READ(FW_BLC_SELF);
} else if (IS_I915GM(dev)) {
val = enable ? _MASKED_BIT_ENABLE(INSTPM_SELF_EN) :
_MASKED_BIT_DISABLE(INSTPM_SELF_EN);
I915_WRITE(INSTPM, val);
POSTING_READ(INSTPM);
} else {
return;
}
DRM_DEBUG_KMS("memory self-refresh is %s\n",
enable ? "enabled" : "disabled");
}
/*
* Latency for FIFO fetches is dependent on several factors:
* - memory configuration (speed, channels)
* - chipset
* - current MCH state
* It can be fairly high in some situations, so here we assume a fairly
* pessimal value. It's a tradeoff between extra memory fetches (if we
* set this value too high, the FIFO will fetch frequently to stay full)
* and power consumption (set it too low to save power and we might see
* FIFO underruns and display "flicker").
*
* A value of 5us seems to be a good balance; safe for very low end
* platforms but not overly aggressive on lower latency configs.
*/
static const int pessimal_latency_ns = 5000;
#define VLV_FIFO_START(dsparb, dsparb2, lo_shift, hi_shift) \
((((dsparb) >> (lo_shift)) & 0xff) | ((((dsparb2) >> (hi_shift)) & 0x1) << 8))
static int vlv_get_fifo_size(struct drm_device *dev,
enum pipe pipe, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int sprite0_start, sprite1_start, size;
switch (pipe) {
uint32_t dsparb, dsparb2, dsparb3;
case PIPE_A:
dsparb = I915_READ(DSPARB);
dsparb2 = I915_READ(DSPARB2);
sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 0, 0);
sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 8, 4);
break;
case PIPE_B:
dsparb = I915_READ(DSPARB);
dsparb2 = I915_READ(DSPARB2);
sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 16, 8);
sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 24, 12);
break;
case PIPE_C:
dsparb2 = I915_READ(DSPARB2);
dsparb3 = I915_READ(DSPARB3);
sprite0_start = VLV_FIFO_START(dsparb3, dsparb2, 0, 16);
sprite1_start = VLV_FIFO_START(dsparb3, dsparb2, 8, 20);
break;
default:
return 0;
}
switch (plane) {
case 0:
size = sprite0_start;
break;
case 1:
size = sprite1_start - sprite0_start;
break;
case 2:
size = 512 - 1 - sprite1_start;
break;
default:
return 0;
}
DRM_DEBUG_KMS("Pipe %c %s %c FIFO size: %d\n",
pipe_name(pipe), plane == 0 ? "primary" : "sprite",
plane == 0 ? plane_name(pipe) : sprite_name(pipe, plane - 1),
size);
return size;
}
static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dsparb = I915_READ(DSPARB);
int size;
size = dsparb & 0x7f;
if (plane)
size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
plane ? "B" : "A", size);
return size;
}
static int i830_get_fifo_size(struct drm_device *dev, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dsparb = I915_READ(DSPARB);
int size;
size = dsparb & 0x1ff;
if (plane)
size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
size >>= 1; /* Convert to cachelines */
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
plane ? "B" : "A", size);
return size;
}
static int i845_get_fifo_size(struct drm_device *dev, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dsparb = I915_READ(DSPARB);
int size;
size = dsparb & 0x7f;
size >>= 2; /* Convert to cachelines */
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
plane ? "B" : "A",
size);
return size;
}
/* Pineview has different values for various configs */
static const struct intel_watermark_params pineview_display_wm = {
.fifo_size = PINEVIEW_DISPLAY_FIFO,
.max_wm = PINEVIEW_MAX_WM,
.default_wm = PINEVIEW_DFT_WM,
.guard_size = PINEVIEW_GUARD_WM,
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params pineview_display_hplloff_wm = {
.fifo_size = PINEVIEW_DISPLAY_FIFO,
.max_wm = PINEVIEW_MAX_WM,
.default_wm = PINEVIEW_DFT_HPLLOFF_WM,
.guard_size = PINEVIEW_GUARD_WM,
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params pineview_cursor_wm = {
.fifo_size = PINEVIEW_CURSOR_FIFO,
.max_wm = PINEVIEW_CURSOR_MAX_WM,
.default_wm = PINEVIEW_CURSOR_DFT_WM,
.guard_size = PINEVIEW_CURSOR_GUARD_WM,
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params pineview_cursor_hplloff_wm = {
.fifo_size = PINEVIEW_CURSOR_FIFO,
.max_wm = PINEVIEW_CURSOR_MAX_WM,
.default_wm = PINEVIEW_CURSOR_DFT_WM,
.guard_size = PINEVIEW_CURSOR_GUARD_WM,
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params g4x_wm_info = {
.fifo_size = G4X_FIFO_SIZE,
.max_wm = G4X_MAX_WM,
.default_wm = G4X_MAX_WM,
.guard_size = 2,
.cacheline_size = G4X_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params g4x_cursor_wm_info = {
.fifo_size = I965_CURSOR_FIFO,
.max_wm = I965_CURSOR_MAX_WM,
.default_wm = I965_CURSOR_DFT_WM,
.guard_size = 2,
.cacheline_size = G4X_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params valleyview_wm_info = {
.fifo_size = VALLEYVIEW_FIFO_SIZE,
.max_wm = VALLEYVIEW_MAX_WM,
.default_wm = VALLEYVIEW_MAX_WM,
.guard_size = 2,
.cacheline_size = G4X_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params valleyview_cursor_wm_info = {
.fifo_size = I965_CURSOR_FIFO,
.max_wm = VALLEYVIEW_CURSOR_MAX_WM,
.default_wm = I965_CURSOR_DFT_WM,
.guard_size = 2,
.cacheline_size = G4X_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i965_cursor_wm_info = {
.fifo_size = I965_CURSOR_FIFO,
.max_wm = I965_CURSOR_MAX_WM,
.default_wm = I965_CURSOR_DFT_WM,
.guard_size = 2,
.cacheline_size = I915_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i945_wm_info = {
.fifo_size = I945_FIFO_SIZE,
.max_wm = I915_MAX_WM,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I915_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i915_wm_info = {
.fifo_size = I915_FIFO_SIZE,
.max_wm = I915_MAX_WM,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I915_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i830_a_wm_info = {
.fifo_size = I855GM_FIFO_SIZE,
.max_wm = I915_MAX_WM,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I830_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i830_bc_wm_info = {
.fifo_size = I855GM_FIFO_SIZE,
.max_wm = I915_MAX_WM/2,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I830_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i845_wm_info = {
.fifo_size = I830_FIFO_SIZE,
.max_wm = I915_MAX_WM,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I830_FIFO_LINE_SIZE,
};
/**
* intel_calculate_wm - calculate watermark level
* @clock_in_khz: pixel clock
* @wm: chip FIFO params
* @cpp: bytes per pixel
* @latency_ns: memory latency for the platform
*
* Calculate the watermark level (the level at which the display plane will
* start fetching from memory again). Each chip has a different display
* FIFO size and allocation, so the caller needs to figure that out and pass
* in the correct intel_watermark_params structure.
*
* As the pixel clock runs, the FIFO will be drained at a rate that depends
* on the pixel size. When it reaches the watermark level, it'll start
* fetching FIFO line sized based chunks from memory until the FIFO fills
* past the watermark point. If the FIFO drains completely, a FIFO underrun
* will occur, and a display engine hang could result.
*/
static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
const struct intel_watermark_params *wm,
int fifo_size, int cpp,
unsigned long latency_ns)
{
long entries_required, wm_size;
/*
* Note: we need to make sure we don't overflow for various clock &
* latency values.
* clocks go from a few thousand to several hundred thousand.
* latency is usually a few thousand
*/
entries_required = ((clock_in_khz / 1000) * cpp * latency_ns) /
1000;
entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size);
DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required);
wm_size = fifo_size - (entries_required + wm->guard_size);
DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size);
/* Don't promote wm_size to unsigned... */
if (wm_size > (long)wm->max_wm)
wm_size = wm->max_wm;
if (wm_size <= 0)
wm_size = wm->default_wm;
/*
* Bspec seems to indicate that the value shouldn't be lower than
* 'burst size + 1'. Certainly 830 is quite unhappy with low values.
* Lets go for 8 which is the burst size since certain platforms
* already use a hardcoded 8 (which is what the spec says should be
* done).
*/
if (wm_size <= 8)
wm_size = 8;
return wm_size;
}
static struct drm_crtc *single_enabled_crtc(struct drm_device *dev)
{
struct drm_crtc *crtc, *enabled = NULL;
for_each_crtc(dev, crtc) {
if (intel_crtc_active(crtc)) {
if (enabled)
return NULL;
enabled = crtc;
}
}
return enabled;
}
static void pineview_update_wm(struct drm_crtc *unused_crtc)
{
struct drm_device *dev = unused_crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
const struct cxsr_latency *latency;
u32 reg;
unsigned long wm;
latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
dev_priv->fsb_freq, dev_priv->mem_freq);
if (!latency) {
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
intel_set_memory_cxsr(dev_priv, false);
return;
}
crtc = single_enabled_crtc(dev);
if (crtc) {
const struct drm_display_mode *adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
int cpp = drm_format_plane_cpp(crtc->primary->state->fb->pixel_format, 0);
int clock = adjusted_mode->crtc_clock;
/* Display SR */
wm = intel_calculate_wm(clock, &pineview_display_wm,
pineview_display_wm.fifo_size,
cpp, latency->display_sr);
reg = I915_READ(DSPFW1);
reg &= ~DSPFW_SR_MASK;
reg |= FW_WM(wm, SR);
I915_WRITE(DSPFW1, reg);
DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
/* cursor SR */
wm = intel_calculate_wm(clock, &pineview_cursor_wm,
pineview_display_wm.fifo_size,
cpp, latency->cursor_sr);
reg = I915_READ(DSPFW3);
reg &= ~DSPFW_CURSOR_SR_MASK;
reg |= FW_WM(wm, CURSOR_SR);
I915_WRITE(DSPFW3, reg);
/* Display HPLL off SR */
wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm,
pineview_display_hplloff_wm.fifo_size,
cpp, latency->display_hpll_disable);
reg = I915_READ(DSPFW3);
reg &= ~DSPFW_HPLL_SR_MASK;
reg |= FW_WM(wm, HPLL_SR);
I915_WRITE(DSPFW3, reg);
/* cursor HPLL off SR */
wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm,
pineview_display_hplloff_wm.fifo_size,
cpp, latency->cursor_hpll_disable);
reg = I915_READ(DSPFW3);
reg &= ~DSPFW_HPLL_CURSOR_MASK;
reg |= FW_WM(wm, HPLL_CURSOR);
I915_WRITE(DSPFW3, reg);
DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
intel_set_memory_cxsr(dev_priv, true);
} else {
intel_set_memory_cxsr(dev_priv, false);
}
}
static bool g4x_compute_wm0(struct drm_device *dev,
int plane,
const struct intel_watermark_params *display,
int display_latency_ns,
const struct intel_watermark_params *cursor,
int cursor_latency_ns,
int *plane_wm,
int *cursor_wm)
{
struct drm_crtc *crtc;
const struct drm_display_mode *adjusted_mode;
int htotal, hdisplay, clock, cpp;
int line_time_us, line_count;
int entries, tlb_miss;
crtc = intel_get_crtc_for_plane(dev, plane);
if (!intel_crtc_active(crtc)) {
*cursor_wm = cursor->guard_size;
*plane_wm = display->guard_size;
return false;
}
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 19:55:25 +07:00
adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
clock = adjusted_mode->crtc_clock;
htotal = adjusted_mode->crtc_htotal;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 19:55:25 +07:00
hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
cpp = drm_format_plane_cpp(crtc->primary->state->fb->pixel_format, 0);
/* Use the small buffer method to calculate plane watermark */
entries = ((clock * cpp / 1000) * display_latency_ns) / 1000;
tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
if (tlb_miss > 0)
entries += tlb_miss;
entries = DIV_ROUND_UP(entries, display->cacheline_size);
*plane_wm = entries + display->guard_size;
if (*plane_wm > (int)display->max_wm)
*plane_wm = display->max_wm;
/* Use the large buffer method to calculate cursor watermark */
line_time_us = max(htotal * 1000 / clock, 1);
line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
entries = line_count * crtc->cursor->state->crtc_w * cpp;
tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
if (tlb_miss > 0)
entries += tlb_miss;
entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
*cursor_wm = entries + cursor->guard_size;
if (*cursor_wm > (int)cursor->max_wm)
*cursor_wm = (int)cursor->max_wm;
return true;
}
/*
* Check the wm result.
*
* If any calculated watermark values is larger than the maximum value that
* can be programmed into the associated watermark register, that watermark
* must be disabled.
*/
static bool g4x_check_srwm(struct drm_device *dev,
int display_wm, int cursor_wm,
const struct intel_watermark_params *display,
const struct intel_watermark_params *cursor)
{
DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n",
display_wm, cursor_wm);
if (display_wm > display->max_wm) {
DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n",
display_wm, display->max_wm);
return false;
}
if (cursor_wm > cursor->max_wm) {
DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n",
cursor_wm, cursor->max_wm);
return false;
}
if (!(display_wm || cursor_wm)) {
DRM_DEBUG_KMS("SR latency is 0, disabling\n");
return false;
}
return true;
}
static bool g4x_compute_srwm(struct drm_device *dev,
int plane,
int latency_ns,
const struct intel_watermark_params *display,
const struct intel_watermark_params *cursor,
int *display_wm, int *cursor_wm)
{
struct drm_crtc *crtc;
const struct drm_display_mode *adjusted_mode;
int hdisplay, htotal, cpp, clock;
unsigned long line_time_us;
int line_count, line_size;
int small, large;
int entries;
if (!latency_ns) {
*display_wm = *cursor_wm = 0;
return false;
}
crtc = intel_get_crtc_for_plane(dev, plane);
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 19:55:25 +07:00
adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
clock = adjusted_mode->crtc_clock;
htotal = adjusted_mode->crtc_htotal;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 19:55:25 +07:00
hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
cpp = drm_format_plane_cpp(crtc->primary->state->fb->pixel_format, 0);
line_time_us = max(htotal * 1000 / clock, 1);
line_count = (latency_ns / line_time_us + 1000) / 1000;
line_size = hdisplay * cpp;
/* Use the minimum of the small and large buffer method for primary */
small = ((clock * cpp / 1000) * latency_ns) / 1000;
large = line_count * line_size;
entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
*display_wm = entries + display->guard_size;
/* calculate the self-refresh watermark for display cursor */
entries = line_count * cpp * crtc->cursor->state->crtc_w;
entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
*cursor_wm = entries + cursor->guard_size;
return g4x_check_srwm(dev,
*display_wm, *cursor_wm,
display, cursor);
}
#define FW_WM_VLV(value, plane) \
(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK_VLV)
static void vlv_write_wm_values(struct intel_crtc *crtc,
const struct vlv_wm_values *wm)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum pipe pipe = crtc->pipe;
I915_WRITE(VLV_DDL(pipe),
(wm->ddl[pipe].cursor << DDL_CURSOR_SHIFT) |
(wm->ddl[pipe].sprite[1] << DDL_SPRITE_SHIFT(1)) |
(wm->ddl[pipe].sprite[0] << DDL_SPRITE_SHIFT(0)) |
(wm->ddl[pipe].primary << DDL_PLANE_SHIFT));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
I915_WRITE(DSPFW1,
FW_WM(wm->sr.plane, SR) |
FW_WM(wm->pipe[PIPE_B].cursor, CURSORB) |
FW_WM_VLV(wm->pipe[PIPE_B].primary, PLANEB) |
FW_WM_VLV(wm->pipe[PIPE_A].primary, PLANEA));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
I915_WRITE(DSPFW2,
FW_WM_VLV(wm->pipe[PIPE_A].sprite[1], SPRITEB) |
FW_WM(wm->pipe[PIPE_A].cursor, CURSORA) |
FW_WM_VLV(wm->pipe[PIPE_A].sprite[0], SPRITEA));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
I915_WRITE(DSPFW3,
FW_WM(wm->sr.cursor, CURSOR_SR));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
if (IS_CHERRYVIEW(dev_priv)) {
I915_WRITE(DSPFW7_CHV,
FW_WM_VLV(wm->pipe[PIPE_B].sprite[1], SPRITED) |
FW_WM_VLV(wm->pipe[PIPE_B].sprite[0], SPRITEC));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
I915_WRITE(DSPFW8_CHV,
FW_WM_VLV(wm->pipe[PIPE_C].sprite[1], SPRITEF) |
FW_WM_VLV(wm->pipe[PIPE_C].sprite[0], SPRITEE));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
I915_WRITE(DSPFW9_CHV,
FW_WM_VLV(wm->pipe[PIPE_C].primary, PLANEC) |
FW_WM(wm->pipe[PIPE_C].cursor, CURSORC));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
I915_WRITE(DSPHOWM,
FW_WM(wm->sr.plane >> 9, SR_HI) |
FW_WM(wm->pipe[PIPE_C].sprite[1] >> 8, SPRITEF_HI) |
FW_WM(wm->pipe[PIPE_C].sprite[0] >> 8, SPRITEE_HI) |
FW_WM(wm->pipe[PIPE_C].primary >> 8, PLANEC_HI) |
FW_WM(wm->pipe[PIPE_B].sprite[1] >> 8, SPRITED_HI) |
FW_WM(wm->pipe[PIPE_B].sprite[0] >> 8, SPRITEC_HI) |
FW_WM(wm->pipe[PIPE_B].primary >> 8, PLANEB_HI) |
FW_WM(wm->pipe[PIPE_A].sprite[1] >> 8, SPRITEB_HI) |
FW_WM(wm->pipe[PIPE_A].sprite[0] >> 8, SPRITEA_HI) |
FW_WM(wm->pipe[PIPE_A].primary >> 8, PLANEA_HI));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
} else {
I915_WRITE(DSPFW7,
FW_WM_VLV(wm->pipe[PIPE_B].sprite[1], SPRITED) |
FW_WM_VLV(wm->pipe[PIPE_B].sprite[0], SPRITEC));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
I915_WRITE(DSPHOWM,
FW_WM(wm->sr.plane >> 9, SR_HI) |
FW_WM(wm->pipe[PIPE_B].sprite[1] >> 8, SPRITED_HI) |
FW_WM(wm->pipe[PIPE_B].sprite[0] >> 8, SPRITEC_HI) |
FW_WM(wm->pipe[PIPE_B].primary >> 8, PLANEB_HI) |
FW_WM(wm->pipe[PIPE_A].sprite[1] >> 8, SPRITEB_HI) |
FW_WM(wm->pipe[PIPE_A].sprite[0] >> 8, SPRITEA_HI) |
FW_WM(wm->pipe[PIPE_A].primary >> 8, PLANEA_HI));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
}
/* zero (unused) WM1 watermarks */
I915_WRITE(DSPFW4, 0);
I915_WRITE(DSPFW5, 0);
I915_WRITE(DSPFW6, 0);
I915_WRITE(DSPHOWM1, 0);
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
POSTING_READ(DSPFW1);
}
#undef FW_WM_VLV
enum vlv_wm_level {
VLV_WM_LEVEL_PM2,
VLV_WM_LEVEL_PM5,
VLV_WM_LEVEL_DDR_DVFS,
};
/* latency must be in 0.1us units. */
static unsigned int vlv_wm_method2(unsigned int pixel_rate,
unsigned int pipe_htotal,
unsigned int horiz_pixels,
unsigned int cpp,
unsigned int latency)
{
unsigned int ret;
ret = (latency * pixel_rate) / (pipe_htotal * 10000);
ret = (ret + 1) * horiz_pixels * cpp;
ret = DIV_ROUND_UP(ret, 64);
return ret;
}
static void vlv_setup_wm_latency(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* all latencies in usec */
dev_priv->wm.pri_latency[VLV_WM_LEVEL_PM2] = 3;
dev_priv->wm.max_level = VLV_WM_LEVEL_PM2;
if (IS_CHERRYVIEW(dev_priv)) {
dev_priv->wm.pri_latency[VLV_WM_LEVEL_PM5] = 12;
dev_priv->wm.pri_latency[VLV_WM_LEVEL_DDR_DVFS] = 33;
dev_priv->wm.max_level = VLV_WM_LEVEL_DDR_DVFS;
}
}
static uint16_t vlv_compute_wm_level(struct intel_plane *plane,
struct intel_crtc *crtc,
const struct intel_plane_state *state,
int level)
{
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
int clock, htotal, cpp, width, wm;
if (dev_priv->wm.pri_latency[level] == 0)
return USHRT_MAX;
if (!state->visible)
return 0;
cpp = drm_format_plane_cpp(state->base.fb->pixel_format, 0);
clock = crtc->config->base.adjusted_mode.crtc_clock;
htotal = crtc->config->base.adjusted_mode.crtc_htotal;
width = crtc->config->pipe_src_w;
if (WARN_ON(htotal == 0))
htotal = 1;
if (plane->base.type == DRM_PLANE_TYPE_CURSOR) {
/*
* FIXME the formula gives values that are
* too big for the cursor FIFO, and hence we
* would never be able to use cursors. For
* now just hardcode the watermark.
*/
wm = 63;
} else {
wm = vlv_wm_method2(clock, htotal, width, cpp,
dev_priv->wm.pri_latency[level] * 10);
}
return min_t(int, wm, USHRT_MAX);
}
static void vlv_compute_fifo(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct vlv_wm_state *wm_state = &crtc->wm_state;
struct intel_plane *plane;
unsigned int total_rate = 0;
const int fifo_size = 512 - 1;
int fifo_extra, fifo_left = fifo_size;
for_each_intel_plane_on_crtc(dev, crtc, plane) {
struct intel_plane_state *state =
to_intel_plane_state(plane->base.state);
if (plane->base.type == DRM_PLANE_TYPE_CURSOR)
continue;
if (state->visible) {
wm_state->num_active_planes++;
total_rate += drm_format_plane_cpp(state->base.fb->pixel_format, 0);
}
}
for_each_intel_plane_on_crtc(dev, crtc, plane) {
struct intel_plane_state *state =
to_intel_plane_state(plane->base.state);
unsigned int rate;
if (plane->base.type == DRM_PLANE_TYPE_CURSOR) {
plane->wm.fifo_size = 63;
continue;
}
if (!state->visible) {
plane->wm.fifo_size = 0;
continue;
}
rate = drm_format_plane_cpp(state->base.fb->pixel_format, 0);
plane->wm.fifo_size = fifo_size * rate / total_rate;
fifo_left -= plane->wm.fifo_size;
}
fifo_extra = DIV_ROUND_UP(fifo_left, wm_state->num_active_planes ?: 1);
/* spread the remainder evenly */
for_each_intel_plane_on_crtc(dev, crtc, plane) {
int plane_extra;
if (fifo_left == 0)
break;
if (plane->base.type == DRM_PLANE_TYPE_CURSOR)
continue;
/* give it all to the first plane if none are active */
if (plane->wm.fifo_size == 0 &&
wm_state->num_active_planes)
continue;
plane_extra = min(fifo_extra, fifo_left);
plane->wm.fifo_size += plane_extra;
fifo_left -= plane_extra;
}
WARN_ON(fifo_left != 0);
}
static void vlv_invert_wms(struct intel_crtc *crtc)
{
struct vlv_wm_state *wm_state = &crtc->wm_state;
int level;
for (level = 0; level < wm_state->num_levels; level++) {
struct drm_device *dev = crtc->base.dev;
const int sr_fifo_size = INTEL_INFO(dev)->num_pipes * 512 - 1;
struct intel_plane *plane;
wm_state->sr[level].plane = sr_fifo_size - wm_state->sr[level].plane;
wm_state->sr[level].cursor = 63 - wm_state->sr[level].cursor;
for_each_intel_plane_on_crtc(dev, crtc, plane) {
switch (plane->base.type) {
int sprite;
case DRM_PLANE_TYPE_CURSOR:
wm_state->wm[level].cursor = plane->wm.fifo_size -
wm_state->wm[level].cursor;
break;
case DRM_PLANE_TYPE_PRIMARY:
wm_state->wm[level].primary = plane->wm.fifo_size -
wm_state->wm[level].primary;
break;
case DRM_PLANE_TYPE_OVERLAY:
sprite = plane->plane;
wm_state->wm[level].sprite[sprite] = plane->wm.fifo_size -
wm_state->wm[level].sprite[sprite];
break;
}
}
}
}
static void vlv_compute_wm(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct vlv_wm_state *wm_state = &crtc->wm_state;
struct intel_plane *plane;
int sr_fifo_size = INTEL_INFO(dev)->num_pipes * 512 - 1;
int level;
memset(wm_state, 0, sizeof(*wm_state));
wm_state->cxsr = crtc->pipe != PIPE_C && crtc->wm.cxsr_allowed;
wm_state->num_levels = to_i915(dev)->wm.max_level + 1;
wm_state->num_active_planes = 0;
vlv_compute_fifo(crtc);
if (wm_state->num_active_planes != 1)
wm_state->cxsr = false;
if (wm_state->cxsr) {
for (level = 0; level < wm_state->num_levels; level++) {
wm_state->sr[level].plane = sr_fifo_size;
wm_state->sr[level].cursor = 63;
}
}
for_each_intel_plane_on_crtc(dev, crtc, plane) {
struct intel_plane_state *state =
to_intel_plane_state(plane->base.state);
if (!state->visible)
continue;
/* normal watermarks */
for (level = 0; level < wm_state->num_levels; level++) {
int wm = vlv_compute_wm_level(plane, crtc, state, level);
int max_wm = plane->base.type == DRM_PLANE_TYPE_CURSOR ? 63 : 511;
/* hack */
if (WARN_ON(level == 0 && wm > max_wm))
wm = max_wm;
if (wm > plane->wm.fifo_size)
break;
switch (plane->base.type) {
int sprite;
case DRM_PLANE_TYPE_CURSOR:
wm_state->wm[level].cursor = wm;
break;
case DRM_PLANE_TYPE_PRIMARY:
wm_state->wm[level].primary = wm;
break;
case DRM_PLANE_TYPE_OVERLAY:
sprite = plane->plane;
wm_state->wm[level].sprite[sprite] = wm;
break;
}
}
wm_state->num_levels = level;
if (!wm_state->cxsr)
continue;
/* maxfifo watermarks */
switch (plane->base.type) {
int sprite, level;
case DRM_PLANE_TYPE_CURSOR:
for (level = 0; level < wm_state->num_levels; level++)
wm_state->sr[level].cursor =
wm_state->wm[level].cursor;
break;
case DRM_PLANE_TYPE_PRIMARY:
for (level = 0; level < wm_state->num_levels; level++)
wm_state->sr[level].plane =
min(wm_state->sr[level].plane,
wm_state->wm[level].primary);
break;
case DRM_PLANE_TYPE_OVERLAY:
sprite = plane->plane;
for (level = 0; level < wm_state->num_levels; level++)
wm_state->sr[level].plane =
min(wm_state->sr[level].plane,
wm_state->wm[level].sprite[sprite]);
break;
}
}
/* clear any (partially) filled invalid levels */
for (level = wm_state->num_levels; level < to_i915(dev)->wm.max_level + 1; level++) {
memset(&wm_state->wm[level], 0, sizeof(wm_state->wm[level]));
memset(&wm_state->sr[level], 0, sizeof(wm_state->sr[level]));
}
vlv_invert_wms(crtc);
}
#define VLV_FIFO(plane, value) \
(((value) << DSPARB_ ## plane ## _SHIFT_VLV) & DSPARB_ ## plane ## _MASK_VLV)
static void vlv_pipe_set_fifo_size(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_plane *plane;
int sprite0_start = 0, sprite1_start = 0, fifo_size = 0;
for_each_intel_plane_on_crtc(dev, crtc, plane) {
if (plane->base.type == DRM_PLANE_TYPE_CURSOR) {
WARN_ON(plane->wm.fifo_size != 63);
continue;
}
if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
sprite0_start = plane->wm.fifo_size;
else if (plane->plane == 0)
sprite1_start = sprite0_start + plane->wm.fifo_size;
else
fifo_size = sprite1_start + plane->wm.fifo_size;
}
WARN_ON(fifo_size != 512 - 1);
DRM_DEBUG_KMS("Pipe %c FIFO split %d / %d / %d\n",
pipe_name(crtc->pipe), sprite0_start,
sprite1_start, fifo_size);
switch (crtc->pipe) {
uint32_t dsparb, dsparb2, dsparb3;
case PIPE_A:
dsparb = I915_READ(DSPARB);
dsparb2 = I915_READ(DSPARB2);
dsparb &= ~(VLV_FIFO(SPRITEA, 0xff) |
VLV_FIFO(SPRITEB, 0xff));
dsparb |= (VLV_FIFO(SPRITEA, sprite0_start) |
VLV_FIFO(SPRITEB, sprite1_start));
dsparb2 &= ~(VLV_FIFO(SPRITEA_HI, 0x1) |
VLV_FIFO(SPRITEB_HI, 0x1));
dsparb2 |= (VLV_FIFO(SPRITEA_HI, sprite0_start >> 8) |
VLV_FIFO(SPRITEB_HI, sprite1_start >> 8));
I915_WRITE(DSPARB, dsparb);
I915_WRITE(DSPARB2, dsparb2);
break;
case PIPE_B:
dsparb = I915_READ(DSPARB);
dsparb2 = I915_READ(DSPARB2);
dsparb &= ~(VLV_FIFO(SPRITEC, 0xff) |
VLV_FIFO(SPRITED, 0xff));
dsparb |= (VLV_FIFO(SPRITEC, sprite0_start) |
VLV_FIFO(SPRITED, sprite1_start));
dsparb2 &= ~(VLV_FIFO(SPRITEC_HI, 0xff) |
VLV_FIFO(SPRITED_HI, 0xff));
dsparb2 |= (VLV_FIFO(SPRITEC_HI, sprite0_start >> 8) |
VLV_FIFO(SPRITED_HI, sprite1_start >> 8));
I915_WRITE(DSPARB, dsparb);
I915_WRITE(DSPARB2, dsparb2);
break;
case PIPE_C:
dsparb3 = I915_READ(DSPARB3);
dsparb2 = I915_READ(DSPARB2);
dsparb3 &= ~(VLV_FIFO(SPRITEE, 0xff) |
VLV_FIFO(SPRITEF, 0xff));
dsparb3 |= (VLV_FIFO(SPRITEE, sprite0_start) |
VLV_FIFO(SPRITEF, sprite1_start));
dsparb2 &= ~(VLV_FIFO(SPRITEE_HI, 0xff) |
VLV_FIFO(SPRITEF_HI, 0xff));
dsparb2 |= (VLV_FIFO(SPRITEE_HI, sprite0_start >> 8) |
VLV_FIFO(SPRITEF_HI, sprite1_start >> 8));
I915_WRITE(DSPARB3, dsparb3);
I915_WRITE(DSPARB2, dsparb2);
break;
default:
break;
}
}
#undef VLV_FIFO
static void vlv_merge_wm(struct drm_device *dev,
struct vlv_wm_values *wm)
{
struct intel_crtc *crtc;
int num_active_crtcs = 0;
wm->level = to_i915(dev)->wm.max_level;
wm->cxsr = true;
for_each_intel_crtc(dev, crtc) {
const struct vlv_wm_state *wm_state = &crtc->wm_state;
if (!crtc->active)
continue;
if (!wm_state->cxsr)
wm->cxsr = false;
num_active_crtcs++;
wm->level = min_t(int, wm->level, wm_state->num_levels - 1);
}
if (num_active_crtcs != 1)
wm->cxsr = false;
if (num_active_crtcs > 1)
wm->level = VLV_WM_LEVEL_PM2;
for_each_intel_crtc(dev, crtc) {
struct vlv_wm_state *wm_state = &crtc->wm_state;
enum pipe pipe = crtc->pipe;
if (!crtc->active)
continue;
wm->pipe[pipe] = wm_state->wm[wm->level];
if (wm->cxsr)
wm->sr = wm_state->sr[wm->level];
wm->ddl[pipe].primary = DDL_PRECISION_HIGH | 2;
wm->ddl[pipe].sprite[0] = DDL_PRECISION_HIGH | 2;
wm->ddl[pipe].sprite[1] = DDL_PRECISION_HIGH | 2;
wm->ddl[pipe].cursor = DDL_PRECISION_HIGH | 2;
}
}
static void vlv_update_wm(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
enum pipe pipe = intel_crtc->pipe;
struct vlv_wm_values wm = {};
vlv_compute_wm(intel_crtc);
vlv_merge_wm(dev, &wm);
if (memcmp(&dev_priv->wm.vlv, &wm, sizeof(wm)) == 0) {
/* FIXME should be part of crtc atomic commit */
vlv_pipe_set_fifo_size(intel_crtc);
return;
}
if (wm.level < VLV_WM_LEVEL_DDR_DVFS &&
dev_priv->wm.vlv.level >= VLV_WM_LEVEL_DDR_DVFS)
chv_set_memory_dvfs(dev_priv, false);
if (wm.level < VLV_WM_LEVEL_PM5 &&
dev_priv->wm.vlv.level >= VLV_WM_LEVEL_PM5)
chv_set_memory_pm5(dev_priv, false);
if (!wm.cxsr && dev_priv->wm.vlv.cxsr)
intel_set_memory_cxsr(dev_priv, false);
/* FIXME should be part of crtc atomic commit */
vlv_pipe_set_fifo_size(intel_crtc);
vlv_write_wm_values(intel_crtc, &wm);
DRM_DEBUG_KMS("Setting FIFO watermarks - %c: plane=%d, cursor=%d, "
"sprite0=%d, sprite1=%d, SR: plane=%d, cursor=%d level=%d cxsr=%d\n",
pipe_name(pipe), wm.pipe[pipe].primary, wm.pipe[pipe].cursor,
wm.pipe[pipe].sprite[0], wm.pipe[pipe].sprite[1],
wm.sr.plane, wm.sr.cursor, wm.level, wm.cxsr);
if (wm.cxsr && !dev_priv->wm.vlv.cxsr)
intel_set_memory_cxsr(dev_priv, true);
if (wm.level >= VLV_WM_LEVEL_PM5 &&
dev_priv->wm.vlv.level < VLV_WM_LEVEL_PM5)
chv_set_memory_pm5(dev_priv, true);
if (wm.level >= VLV_WM_LEVEL_DDR_DVFS &&
dev_priv->wm.vlv.level < VLV_WM_LEVEL_DDR_DVFS)
chv_set_memory_dvfs(dev_priv, true);
dev_priv->wm.vlv = wm;
}
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-06 02:19:49 +07:00
#define single_plane_enabled(mask) is_power_of_2(mask)
static void g4x_update_wm(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
static const int sr_latency_ns = 12000;
struct drm_i915_private *dev_priv = dev->dev_private;
int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
int plane_sr, cursor_sr;
unsigned int enabled = 0;
bool cxsr_enabled;
if (g4x_compute_wm0(dev, PIPE_A,
&g4x_wm_info, pessimal_latency_ns,
&g4x_cursor_wm_info, pessimal_latency_ns,
&planea_wm, &cursora_wm))
enabled |= 1 << PIPE_A;
if (g4x_compute_wm0(dev, PIPE_B,
&g4x_wm_info, pessimal_latency_ns,
&g4x_cursor_wm_info, pessimal_latency_ns,
&planeb_wm, &cursorb_wm))
enabled |= 1 << PIPE_B;
if (single_plane_enabled(enabled) &&
g4x_compute_srwm(dev, ffs(enabled) - 1,
sr_latency_ns,
&g4x_wm_info,
&g4x_cursor_wm_info,
&plane_sr, &cursor_sr)) {
cxsr_enabled = true;
} else {
cxsr_enabled = false;
intel_set_memory_cxsr(dev_priv, false);
plane_sr = cursor_sr = 0;
}
DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, "
"B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
planea_wm, cursora_wm,
planeb_wm, cursorb_wm,
plane_sr, cursor_sr);
I915_WRITE(DSPFW1,
FW_WM(plane_sr, SR) |
FW_WM(cursorb_wm, CURSORB) |
FW_WM(planeb_wm, PLANEB) |
FW_WM(planea_wm, PLANEA));
I915_WRITE(DSPFW2,
(I915_READ(DSPFW2) & ~DSPFW_CURSORA_MASK) |
FW_WM(cursora_wm, CURSORA));
/* HPLL off in SR has some issues on G4x... disable it */
I915_WRITE(DSPFW3,
(I915_READ(DSPFW3) & ~(DSPFW_HPLL_SR_EN | DSPFW_CURSOR_SR_MASK)) |
FW_WM(cursor_sr, CURSOR_SR));
if (cxsr_enabled)
intel_set_memory_cxsr(dev_priv, true);
}
static void i965_update_wm(struct drm_crtc *unused_crtc)
{
struct drm_device *dev = unused_crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
int srwm = 1;
int cursor_sr = 16;
bool cxsr_enabled;
/* Calc sr entries for one plane configs */
crtc = single_enabled_crtc(dev);
if (crtc) {
/* self-refresh has much higher latency */
static const int sr_latency_ns = 12000;
const struct drm_display_mode *adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
int clock = adjusted_mode->crtc_clock;
int htotal = adjusted_mode->crtc_htotal;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 19:55:25 +07:00
int hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
int cpp = drm_format_plane_cpp(crtc->primary->state->fb->pixel_format, 0);
unsigned long line_time_us;
int entries;
line_time_us = max(htotal * 1000 / clock, 1);
/* Use ns/us then divide to preserve precision */
entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
cpp * hdisplay;
entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE);
srwm = I965_FIFO_SIZE - entries;
if (srwm < 0)
srwm = 1;
srwm &= 0x1ff;
DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n",
entries, srwm);
entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
cpp * crtc->cursor->state->crtc_w;
entries = DIV_ROUND_UP(entries,
i965_cursor_wm_info.cacheline_size);
cursor_sr = i965_cursor_wm_info.fifo_size -
(entries + i965_cursor_wm_info.guard_size);
if (cursor_sr > i965_cursor_wm_info.max_wm)
cursor_sr = i965_cursor_wm_info.max_wm;
DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
"cursor %d\n", srwm, cursor_sr);
cxsr_enabled = true;
} else {
cxsr_enabled = false;
/* Turn off self refresh if both pipes are enabled */
intel_set_memory_cxsr(dev_priv, false);
}
DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
srwm);
/* 965 has limitations... */
I915_WRITE(DSPFW1, FW_WM(srwm, SR) |
FW_WM(8, CURSORB) |
FW_WM(8, PLANEB) |
FW_WM(8, PLANEA));
I915_WRITE(DSPFW2, FW_WM(8, CURSORA) |
FW_WM(8, PLANEC_OLD));
/* update cursor SR watermark */
I915_WRITE(DSPFW3, FW_WM(cursor_sr, CURSOR_SR));
if (cxsr_enabled)
intel_set_memory_cxsr(dev_priv, true);
}
#undef FW_WM
static void i9xx_update_wm(struct drm_crtc *unused_crtc)
{
struct drm_device *dev = unused_crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
const struct intel_watermark_params *wm_info;
uint32_t fwater_lo;
uint32_t fwater_hi;
int cwm, srwm = 1;
int fifo_size;
int planea_wm, planeb_wm;
struct drm_crtc *crtc, *enabled = NULL;
if (IS_I945GM(dev))
wm_info = &i945_wm_info;
else if (!IS_GEN2(dev))
wm_info = &i915_wm_info;
else
wm_info = &i830_a_wm_info;
fifo_size = dev_priv->display.get_fifo_size(dev, 0);
crtc = intel_get_crtc_for_plane(dev, 0);
if (intel_crtc_active(crtc)) {
const struct drm_display_mode *adjusted_mode;
int cpp = drm_format_plane_cpp(crtc->primary->state->fb->pixel_format, 0);
if (IS_GEN2(dev))
cpp = 4;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 19:55:25 +07:00
adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
wm_info, fifo_size, cpp,
pessimal_latency_ns);
enabled = crtc;
} else {
planea_wm = fifo_size - wm_info->guard_size;
if (planea_wm > (long)wm_info->max_wm)
planea_wm = wm_info->max_wm;
}
if (IS_GEN2(dev))
wm_info = &i830_bc_wm_info;
fifo_size = dev_priv->display.get_fifo_size(dev, 1);
crtc = intel_get_crtc_for_plane(dev, 1);
if (intel_crtc_active(crtc)) {
const struct drm_display_mode *adjusted_mode;
int cpp = drm_format_plane_cpp(crtc->primary->state->fb->pixel_format, 0);
if (IS_GEN2(dev))
cpp = 4;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 19:55:25 +07:00
adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
planeb_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
wm_info, fifo_size, cpp,
pessimal_latency_ns);
if (enabled == NULL)
enabled = crtc;
else
enabled = NULL;
} else {
planeb_wm = fifo_size - wm_info->guard_size;
if (planeb_wm > (long)wm_info->max_wm)
planeb_wm = wm_info->max_wm;
}
DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
if (IS_I915GM(dev) && enabled) {
struct drm_i915_gem_object *obj;
obj = intel_fb_obj(enabled->primary->state->fb);
/* self-refresh seems busted with untiled */
if (obj->tiling_mode == I915_TILING_NONE)
enabled = NULL;
}
/*
* Overlay gets an aggressive default since video jitter is bad.
*/
cwm = 2;
/* Play safe and disable self-refresh before adjusting watermarks. */
intel_set_memory_cxsr(dev_priv, false);
/* Calc sr entries for one plane configs */
if (HAS_FW_BLC(dev) && enabled) {
/* self-refresh has much higher latency */
static const int sr_latency_ns = 6000;
const struct drm_display_mode *adjusted_mode = &to_intel_crtc(enabled)->config->base.adjusted_mode;
int clock = adjusted_mode->crtc_clock;
int htotal = adjusted_mode->crtc_htotal;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 19:55:25 +07:00
int hdisplay = to_intel_crtc(enabled)->config->pipe_src_w;
int cpp = drm_format_plane_cpp(enabled->primary->state->fb->pixel_format, 0);
unsigned long line_time_us;
int entries;
line_time_us = max(htotal * 1000 / clock, 1);
/* Use ns/us then divide to preserve precision */
entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
cpp * hdisplay;
entries = DIV_ROUND_UP(entries, wm_info->cacheline_size);
DRM_DEBUG_KMS("self-refresh entries: %d\n", entries);
srwm = wm_info->fifo_size - entries;
if (srwm < 0)
srwm = 1;
if (IS_I945G(dev) || IS_I945GM(dev))
I915_WRITE(FW_BLC_SELF,
FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
else if (IS_I915GM(dev))
I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
}
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
planea_wm, planeb_wm, cwm, srwm);
fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
fwater_hi = (cwm & 0x1f);
/* Set request length to 8 cachelines per fetch */
fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
fwater_hi = fwater_hi | (1 << 8);
I915_WRITE(FW_BLC, fwater_lo);
I915_WRITE(FW_BLC2, fwater_hi);
if (enabled)
intel_set_memory_cxsr(dev_priv, true);
}
static void i845_update_wm(struct drm_crtc *unused_crtc)
{
struct drm_device *dev = unused_crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
const struct drm_display_mode *adjusted_mode;
uint32_t fwater_lo;
int planea_wm;
crtc = single_enabled_crtc(dev);
if (crtc == NULL)
return;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 19:55:25 +07:00
adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
&i845_wm_info,
dev_priv->display.get_fifo_size(dev, 0),
4, pessimal_latency_ns);
fwater_lo = I915_READ(FW_BLC) & ~0xfff;
fwater_lo |= (3<<8) | planea_wm;
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
I915_WRITE(FW_BLC, fwater_lo);
}
uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config)
{
uint32_t pixel_rate;
pixel_rate = pipe_config->base.adjusted_mode.crtc_clock;
/* We only use IF-ID interlacing. If we ever use PF-ID we'll need to
* adjust the pixel_rate here. */
if (pipe_config->pch_pfit.enabled) {
uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
uint32_t pfit_size = pipe_config->pch_pfit.size;
pipe_w = pipe_config->pipe_src_w;
pipe_h = pipe_config->pipe_src_h;
pfit_w = (pfit_size >> 16) & 0xFFFF;
pfit_h = pfit_size & 0xFFFF;
if (pipe_w < pfit_w)
pipe_w = pfit_w;
if (pipe_h < pfit_h)
pipe_h = pfit_h;
if (WARN_ON(!pfit_w || !pfit_h))
return pixel_rate;
pixel_rate = div_u64((uint64_t) pixel_rate * pipe_w * pipe_h,
pfit_w * pfit_h);
}
return pixel_rate;
}
/* latency must be in 0.1us units. */
static uint32_t ilk_wm_method1(uint32_t pixel_rate, uint8_t cpp, uint32_t latency)
{
uint64_t ret;
if (WARN(latency == 0, "Latency value missing\n"))
return UINT_MAX;
ret = (uint64_t) pixel_rate * cpp * latency;
ret = DIV_ROUND_UP_ULL(ret, 64 * 10000) + 2;
return ret;
}
/* latency must be in 0.1us units. */
static uint32_t ilk_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
uint32_t horiz_pixels, uint8_t cpp,
uint32_t latency)
{
uint32_t ret;
if (WARN(latency == 0, "Latency value missing\n"))
return UINT_MAX;
if (WARN_ON(!pipe_htotal))
return UINT_MAX;
ret = (latency * pixel_rate) / (pipe_htotal * 10000);
ret = (ret + 1) * horiz_pixels * cpp;
ret = DIV_ROUND_UP(ret, 64) + 2;
return ret;
}
static uint32_t ilk_wm_fbc(uint32_t pri_val, uint32_t horiz_pixels,
uint8_t cpp)
{
/*
* Neither of these should be possible since this function shouldn't be
* called if the CRTC is off or the plane is invisible. But let's be
* extra paranoid to avoid a potential divide-by-zero if we screw up
* elsewhere in the driver.
*/
if (WARN_ON(!cpp))
return 0;
if (WARN_ON(!horiz_pixels))
return 0;
return DIV_ROUND_UP(pri_val * 64, horiz_pixels * cpp) + 2;
}
struct ilk_wm_maximums {
uint16_t pri;
uint16_t spr;
uint16_t cur;
uint16_t fbc;
};
/*
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
*/
static uint32_t ilk_compute_pri_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate,
uint32_t mem_value,
bool is_lp)
{
int cpp = pstate->base.fb ?
drm_format_plane_cpp(pstate->base.fb->pixel_format, 0) : 0;
uint32_t method1, method2;
if (!cstate->base.active || !pstate->visible)
return 0;
method1 = ilk_wm_method1(ilk_pipe_pixel_rate(cstate), cpp, mem_value);
if (!is_lp)
return method1;
method2 = ilk_wm_method2(ilk_pipe_pixel_rate(cstate),
cstate->base.adjusted_mode.crtc_htotal,
drm_rect_width(&pstate->dst),
cpp, mem_value);
return min(method1, method2);
}
/*
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
*/
static uint32_t ilk_compute_spr_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate,
uint32_t mem_value)
{
int cpp = pstate->base.fb ?
drm_format_plane_cpp(pstate->base.fb->pixel_format, 0) : 0;
uint32_t method1, method2;
if (!cstate->base.active || !pstate->visible)
return 0;
method1 = ilk_wm_method1(ilk_pipe_pixel_rate(cstate), cpp, mem_value);
method2 = ilk_wm_method2(ilk_pipe_pixel_rate(cstate),
cstate->base.adjusted_mode.crtc_htotal,
drm_rect_width(&pstate->dst),
cpp, mem_value);
return min(method1, method2);
}
/*
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
*/
static uint32_t ilk_compute_cur_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate,
uint32_t mem_value)
{
/*
* We treat the cursor plane as always-on for the purposes of watermark
* calculation. Until we have two-stage watermark programming merged,
* this is necessary to avoid flickering.
*/
int cpp = 4;
int width = pstate->visible ? pstate->base.crtc_w : 64;
if (!cstate->base.active)
return 0;
return ilk_wm_method2(ilk_pipe_pixel_rate(cstate),
cstate->base.adjusted_mode.crtc_htotal,
width, cpp, mem_value);
}
/* Only for WM_LP. */
static uint32_t ilk_compute_fbc_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate,
uint32_t pri_val)
{
int cpp = pstate->base.fb ?
drm_format_plane_cpp(pstate->base.fb->pixel_format, 0) : 0;
if (!cstate->base.active || !pstate->visible)
return 0;
return ilk_wm_fbc(pri_val, drm_rect_width(&pstate->dst), cpp);
}
static unsigned int ilk_display_fifo_size(const struct drm_device *dev)
{
if (INTEL_INFO(dev)->gen >= 8)
return 3072;
else if (INTEL_INFO(dev)->gen >= 7)
return 768;
else
return 512;
}
static unsigned int ilk_plane_wm_reg_max(const struct drm_device *dev,
int level, bool is_sprite)
{
if (INTEL_INFO(dev)->gen >= 8)
/* BDW primary/sprite plane watermarks */
return level == 0 ? 255 : 2047;
else if (INTEL_INFO(dev)->gen >= 7)
/* IVB/HSW primary/sprite plane watermarks */
return level == 0 ? 127 : 1023;
else if (!is_sprite)
/* ILK/SNB primary plane watermarks */
return level == 0 ? 127 : 511;
else
/* ILK/SNB sprite plane watermarks */
return level == 0 ? 63 : 255;
}
static unsigned int ilk_cursor_wm_reg_max(const struct drm_device *dev,
int level)
{
if (INTEL_INFO(dev)->gen >= 7)
return level == 0 ? 63 : 255;
else
return level == 0 ? 31 : 63;
}
static unsigned int ilk_fbc_wm_reg_max(const struct drm_device *dev)
{
if (INTEL_INFO(dev)->gen >= 8)
return 31;
else
return 15;
}
/* Calculate the maximum primary/sprite plane watermark */
static unsigned int ilk_plane_wm_max(const struct drm_device *dev,
int level,
const struct intel_wm_config *config,
enum intel_ddb_partitioning ddb_partitioning,
bool is_sprite)
{
unsigned int fifo_size = ilk_display_fifo_size(dev);
/* if sprites aren't enabled, sprites get nothing */
if (is_sprite && !config->sprites_enabled)
return 0;
/* HSW allows LP1+ watermarks even with multiple pipes */
if (level == 0 || config->num_pipes_active > 1) {
fifo_size /= INTEL_INFO(dev)->num_pipes;
/*
* For some reason the non self refresh
* FIFO size is only half of the self
* refresh FIFO size on ILK/SNB.
*/
if (INTEL_INFO(dev)->gen <= 6)
fifo_size /= 2;
}
if (config->sprites_enabled) {
/* level 0 is always calculated with 1:1 split */
if (level > 0 && ddb_partitioning == INTEL_DDB_PART_5_6) {
if (is_sprite)
fifo_size *= 5;
fifo_size /= 6;
} else {
fifo_size /= 2;
}
}
/* clamp to max that the registers can hold */
return min(fifo_size, ilk_plane_wm_reg_max(dev, level, is_sprite));
}
/* Calculate the maximum cursor plane watermark */
static unsigned int ilk_cursor_wm_max(const struct drm_device *dev,
int level,
const struct intel_wm_config *config)
{
/* HSW LP1+ watermarks w/ multiple pipes */
if (level > 0 && config->num_pipes_active > 1)
return 64;
/* otherwise just report max that registers can hold */
return ilk_cursor_wm_reg_max(dev, level);
}
static void ilk_compute_wm_maximums(const struct drm_device *dev,
int level,
const struct intel_wm_config *config,
enum intel_ddb_partitioning ddb_partitioning,
struct ilk_wm_maximums *max)
{
max->pri = ilk_plane_wm_max(dev, level, config, ddb_partitioning, false);
max->spr = ilk_plane_wm_max(dev, level, config, ddb_partitioning, true);
max->cur = ilk_cursor_wm_max(dev, level, config);
max->fbc = ilk_fbc_wm_reg_max(dev);
}
static void ilk_compute_wm_reg_maximums(struct drm_device *dev,
int level,
struct ilk_wm_maximums *max)
{
max->pri = ilk_plane_wm_reg_max(dev, level, false);
max->spr = ilk_plane_wm_reg_max(dev, level, true);
max->cur = ilk_cursor_wm_reg_max(dev, level);
max->fbc = ilk_fbc_wm_reg_max(dev);
}
static bool ilk_validate_wm_level(int level,
const struct ilk_wm_maximums *max,
struct intel_wm_level *result)
{
bool ret;
/* already determined to be invalid? */
if (!result->enable)
return false;
result->enable = result->pri_val <= max->pri &&
result->spr_val <= max->spr &&
result->cur_val <= max->cur;
ret = result->enable;
/*
* HACK until we can pre-compute everything,
* and thus fail gracefully if LP0 watermarks
* are exceeded...
*/
if (level == 0 && !result->enable) {
if (result->pri_val > max->pri)
DRM_DEBUG_KMS("Primary WM%d too large %u (max %u)\n",
level, result->pri_val, max->pri);
if (result->spr_val > max->spr)
DRM_DEBUG_KMS("Sprite WM%d too large %u (max %u)\n",
level, result->spr_val, max->spr);
if (result->cur_val > max->cur)
DRM_DEBUG_KMS("Cursor WM%d too large %u (max %u)\n",
level, result->cur_val, max->cur);
result->pri_val = min_t(uint32_t, result->pri_val, max->pri);
result->spr_val = min_t(uint32_t, result->spr_val, max->spr);
result->cur_val = min_t(uint32_t, result->cur_val, max->cur);
result->enable = true;
}
return ret;
}
static void ilk_compute_wm_level(const struct drm_i915_private *dev_priv,
const struct intel_crtc *intel_crtc,
int level,
struct intel_crtc_state *cstate,
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
struct intel_plane_state *pristate,
struct intel_plane_state *sprstate,
struct intel_plane_state *curstate,
struct intel_wm_level *result)
{
uint16_t pri_latency = dev_priv->wm.pri_latency[level];
uint16_t spr_latency = dev_priv->wm.spr_latency[level];
uint16_t cur_latency = dev_priv->wm.cur_latency[level];
/* WM1+ latency values stored in 0.5us units */
if (level > 0) {
pri_latency *= 5;
spr_latency *= 5;
cur_latency *= 5;
}
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
result->pri_val = ilk_compute_pri_wm(cstate, pristate,
pri_latency, level);
result->spr_val = ilk_compute_spr_wm(cstate, sprstate, spr_latency);
result->cur_val = ilk_compute_cur_wm(cstate, curstate, cur_latency);
result->fbc_val = ilk_compute_fbc_wm(cstate, pristate, result->pri_val);
result->enable = true;
}
static uint32_t
hsw_compute_linetime_wm(struct drm_device *dev,
struct intel_crtc_state *cstate)
{
struct drm_i915_private *dev_priv = dev->dev_private;
const struct drm_display_mode *adjusted_mode =
&cstate->base.adjusted_mode;
u32 linetime, ips_linetime;
if (!cstate->base.active)
return 0;
if (WARN_ON(adjusted_mode->crtc_clock == 0))
return 0;
if (WARN_ON(dev_priv->cdclk_freq == 0))
return 0;
/* The WM are computed with base on how long it takes to fill a single
* row at the given clock rate, multiplied by 8.
* */
linetime = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
adjusted_mode->crtc_clock);
ips_linetime = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
dev_priv->cdclk_freq);
return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
PIPE_WM_LINETIME_TIME(linetime);
}
static void intel_read_wm_latency(struct drm_device *dev, uint16_t wm[8])
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_GEN9(dev)) {
uint32_t val;
int ret, i;
int level, max_level = ilk_wm_max_level(dev);
/* read the first set of memory latencies[0:3] */
val = 0; /* data0 to be programmed to 0 for first set */
mutex_lock(&dev_priv->rps.hw_lock);
ret = sandybridge_pcode_read(dev_priv,
GEN9_PCODE_READ_MEM_LATENCY,
&val);
mutex_unlock(&dev_priv->rps.hw_lock);
if (ret) {
DRM_ERROR("SKL Mailbox read error = %d\n", ret);
return;
}
wm[0] = val & GEN9_MEM_LATENCY_LEVEL_MASK;
wm[1] = (val >> GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
wm[2] = (val >> GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
wm[3] = (val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
/* read the second set of memory latencies[4:7] */
val = 1; /* data0 to be programmed to 1 for second set */
mutex_lock(&dev_priv->rps.hw_lock);
ret = sandybridge_pcode_read(dev_priv,
GEN9_PCODE_READ_MEM_LATENCY,
&val);
mutex_unlock(&dev_priv->rps.hw_lock);
if (ret) {
DRM_ERROR("SKL Mailbox read error = %d\n", ret);
return;
}
wm[4] = val & GEN9_MEM_LATENCY_LEVEL_MASK;
wm[5] = (val >> GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
wm[6] = (val >> GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
wm[7] = (val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
/*
* WaWmMemoryReadLatency:skl
*
* punit doesn't take into account the read latency so we need
* to add 2us to the various latency levels we retrieve from
* the punit.
* - W0 is a bit special in that it's the only level that
* can't be disabled if we want to have display working, so
* we always add 2us there.
* - For levels >=1, punit returns 0us latency when they are
* disabled, so we respect that and don't add 2us then
*
* Additionally, if a level n (n > 1) has a 0us latency, all
* levels m (m >= n) need to be disabled. We make sure to
* sanitize the values out of the punit to satisfy this
* requirement.
*/
wm[0] += 2;
for (level = 1; level <= max_level; level++)
if (wm[level] != 0)
wm[level] += 2;
else {
for (i = level + 1; i <= max_level; i++)
wm[i] = 0;
break;
}
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
uint64_t sskpd = I915_READ64(MCH_SSKPD);
wm[0] = (sskpd >> 56) & 0xFF;
if (wm[0] == 0)
wm[0] = sskpd & 0xF;
wm[1] = (sskpd >> 4) & 0xFF;
wm[2] = (sskpd >> 12) & 0xFF;
wm[3] = (sskpd >> 20) & 0x1FF;
wm[4] = (sskpd >> 32) & 0x1FF;
} else if (INTEL_INFO(dev)->gen >= 6) {
uint32_t sskpd = I915_READ(MCH_SSKPD);
wm[0] = (sskpd >> SSKPD_WM0_SHIFT) & SSKPD_WM_MASK;
wm[1] = (sskpd >> SSKPD_WM1_SHIFT) & SSKPD_WM_MASK;
wm[2] = (sskpd >> SSKPD_WM2_SHIFT) & SSKPD_WM_MASK;
wm[3] = (sskpd >> SSKPD_WM3_SHIFT) & SSKPD_WM_MASK;
} else if (INTEL_INFO(dev)->gen >= 5) {
uint32_t mltr = I915_READ(MLTR_ILK);
/* ILK primary LP0 latency is 700 ns */
wm[0] = 7;
wm[1] = (mltr >> MLTR_WM1_SHIFT) & ILK_SRLT_MASK;
wm[2] = (mltr >> MLTR_WM2_SHIFT) & ILK_SRLT_MASK;
}
}
static void intel_fixup_spr_wm_latency(struct drm_device *dev, uint16_t wm[5])
{
/* ILK sprite LP0 latency is 1300 ns */
if (INTEL_INFO(dev)->gen == 5)
wm[0] = 13;
}
static void intel_fixup_cur_wm_latency(struct drm_device *dev, uint16_t wm[5])
{
/* ILK cursor LP0 latency is 1300 ns */
if (INTEL_INFO(dev)->gen == 5)
wm[0] = 13;
/* WaDoubleCursorLP3Latency:ivb */
if (IS_IVYBRIDGE(dev))
wm[3] *= 2;
}
int ilk_wm_max_level(const struct drm_device *dev)
{
/* how many WM levels are we expecting */
if (INTEL_INFO(dev)->gen >= 9)
return 7;
else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
return 4;
else if (INTEL_INFO(dev)->gen >= 6)
return 3;
else
return 2;
}
static void intel_print_wm_latency(struct drm_device *dev,
const char *name,
const uint16_t wm[8])
{
int level, max_level = ilk_wm_max_level(dev);
for (level = 0; level <= max_level; level++) {
unsigned int latency = wm[level];
if (latency == 0) {
DRM_ERROR("%s WM%d latency not provided\n",
name, level);
continue;
}
/*
* - latencies are in us on gen9.
* - before then, WM1+ latency values are in 0.5us units
*/
if (IS_GEN9(dev))
latency *= 10;
else if (level > 0)
latency *= 5;
DRM_DEBUG_KMS("%s WM%d latency %u (%u.%u usec)\n",
name, level, wm[level],
latency / 10, latency % 10);
}
}
static bool ilk_increase_wm_latency(struct drm_i915_private *dev_priv,
uint16_t wm[5], uint16_t min)
{
int level, max_level = ilk_wm_max_level(dev_priv->dev);
if (wm[0] >= min)
return false;
wm[0] = max(wm[0], min);
for (level = 1; level <= max_level; level++)
wm[level] = max_t(uint16_t, wm[level], DIV_ROUND_UP(min, 5));
return true;
}
static void snb_wm_latency_quirk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
bool changed;
/*
* The BIOS provided WM memory latency values are often
* inadequate for high resolution displays. Adjust them.
*/
changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) |
ilk_increase_wm_latency(dev_priv, dev_priv->wm.spr_latency, 12) |
ilk_increase_wm_latency(dev_priv, dev_priv->wm.cur_latency, 12);
if (!changed)
return;
DRM_DEBUG_KMS("WM latency values increased to avoid potential underruns\n");
intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency);
intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency);
intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency);
}
static void ilk_setup_wm_latency(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
intel_read_wm_latency(dev, dev_priv->wm.pri_latency);
memcpy(dev_priv->wm.spr_latency, dev_priv->wm.pri_latency,
sizeof(dev_priv->wm.pri_latency));
memcpy(dev_priv->wm.cur_latency, dev_priv->wm.pri_latency,
sizeof(dev_priv->wm.pri_latency));
intel_fixup_spr_wm_latency(dev, dev_priv->wm.spr_latency);
intel_fixup_cur_wm_latency(dev, dev_priv->wm.cur_latency);
intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency);
intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency);
intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency);
if (IS_GEN6(dev))
snb_wm_latency_quirk(dev);
}
static void skl_setup_wm_latency(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
intel_read_wm_latency(dev, dev_priv->wm.skl_latency);
intel_print_wm_latency(dev, "Gen9 Plane", dev_priv->wm.skl_latency);
}
/* Compute new watermarks for the pipe */
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
static int ilk_compute_pipe_wm(struct intel_crtc *intel_crtc,
struct drm_atomic_state *state)
{
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
struct intel_pipe_wm *pipe_wm;
struct drm_device *dev = intel_crtc->base.dev;
const struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
struct intel_crtc_state *cstate = NULL;
struct intel_plane *intel_plane;
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
struct drm_plane_state *ps;
struct intel_plane_state *pristate = NULL;
struct intel_plane_state *sprstate = NULL;
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
struct intel_plane_state *curstate = NULL;
int level, max_level = ilk_wm_max_level(dev);
/* LP0 watermark maximums depend on this pipe alone */
struct intel_wm_config config = {
.num_pipes_active = 1,
};
struct ilk_wm_maximums max;
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
cstate = intel_atomic_get_crtc_state(state, intel_crtc);
if (IS_ERR(cstate))
return PTR_ERR(cstate);
pipe_wm = &cstate->wm.optimal.ilk;
memset(pipe_wm, 0, sizeof(*pipe_wm));
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
ps = drm_atomic_get_plane_state(state,
&intel_plane->base);
if (IS_ERR(ps))
return PTR_ERR(ps);
if (intel_plane->base.type == DRM_PLANE_TYPE_PRIMARY)
pristate = to_intel_plane_state(ps);
else if (intel_plane->base.type == DRM_PLANE_TYPE_OVERLAY)
sprstate = to_intel_plane_state(ps);
else if (intel_plane->base.type == DRM_PLANE_TYPE_CURSOR)
curstate = to_intel_plane_state(ps);
}
config.sprites_enabled = sprstate->visible;
config.sprites_scaled = sprstate->visible &&
(drm_rect_width(&sprstate->dst) != drm_rect_width(&sprstate->src) >> 16 ||
drm_rect_height(&sprstate->dst) != drm_rect_height(&sprstate->src) >> 16);
pipe_wm->pipe_enabled = cstate->base.active;
pipe_wm->sprites_enabled = config.sprites_enabled;
pipe_wm->sprites_scaled = config.sprites_scaled;
/* ILK/SNB: LP2+ watermarks only w/o sprites */
if (INTEL_INFO(dev)->gen <= 6 && sprstate->visible)
max_level = 1;
/* ILK/SNB/IVB: LP1+ watermarks only w/o scaling */
if (config.sprites_scaled)
max_level = 0;
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
ilk_compute_wm_level(dev_priv, intel_crtc, 0, cstate,
pristate, sprstate, curstate, &pipe_wm->wm[0]);
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
pipe_wm->linetime = hsw_compute_linetime_wm(dev, cstate);
/* LP0 watermarks always use 1/2 DDB partitioning */
ilk_compute_wm_maximums(dev, 0, &config, INTEL_DDB_PART_1_2, &max);
/* At least LP0 must be valid */
if (!ilk_validate_wm_level(0, &max, &pipe_wm->wm[0]))
return -EINVAL;
ilk_compute_wm_reg_maximums(dev, 1, &max);
for (level = 1; level <= max_level; level++) {
struct intel_wm_level wm = {};
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
ilk_compute_wm_level(dev_priv, intel_crtc, level, cstate,
pristate, sprstate, curstate, &wm);
/*
* Disable any watermark level that exceeds the
* register maximums since such watermarks are
* always invalid.
*/
if (!ilk_validate_wm_level(level, &max, &wm))
break;
pipe_wm->wm[level] = wm;
}
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
return 0;
}
/*
* Merge the watermarks from all active pipes for a specific level.
*/
static void ilk_merge_wm_level(struct drm_device *dev,
int level,
struct intel_wm_level *ret_wm)
{
const struct intel_crtc *intel_crtc;
ret_wm->enable = true;
for_each_intel_crtc(dev, intel_crtc) {
const struct intel_crtc_state *cstate =
to_intel_crtc_state(intel_crtc->base.state);
const struct intel_pipe_wm *active = &cstate->wm.optimal.ilk;
const struct intel_wm_level *wm = &active->wm[level];
if (!active->pipe_enabled)
continue;
/*
* The watermark values may have been used in the past,
* so we must maintain them in the registers for some
* time even if the level is now disabled.
*/
if (!wm->enable)
ret_wm->enable = false;
ret_wm->pri_val = max(ret_wm->pri_val, wm->pri_val);
ret_wm->spr_val = max(ret_wm->spr_val, wm->spr_val);
ret_wm->cur_val = max(ret_wm->cur_val, wm->cur_val);
ret_wm->fbc_val = max(ret_wm->fbc_val, wm->fbc_val);
}
}
/*
* Merge all low power watermarks for all active pipes.
*/
static void ilk_wm_merge(struct drm_device *dev,
const struct intel_wm_config *config,
const struct ilk_wm_maximums *max,
struct intel_pipe_wm *merged)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int level, max_level = ilk_wm_max_level(dev);
int last_enabled_level = max_level;
/* ILK/SNB/IVB: LP1+ watermarks only w/ single pipe */
if ((INTEL_INFO(dev)->gen <= 6 || IS_IVYBRIDGE(dev)) &&
config->num_pipes_active > 1)
return;
/* ILK: FBC WM must be disabled always */
merged->fbc_wm_enabled = INTEL_INFO(dev)->gen >= 6;
/* merge each WM1+ level */
for (level = 1; level <= max_level; level++) {
struct intel_wm_level *wm = &merged->wm[level];
ilk_merge_wm_level(dev, level, wm);
if (level > last_enabled_level)
wm->enable = false;
else if (!ilk_validate_wm_level(level, max, wm))
/* make sure all following levels get disabled */
last_enabled_level = level - 1;
/*
* The spec says it is preferred to disable
* FBC WMs instead of disabling a WM level.
*/
if (wm->fbc_val > max->fbc) {
if (wm->enable)
merged->fbc_wm_enabled = false;
wm->fbc_val = 0;
}
}
/* ILK: LP2+ must be disabled when FBC WM is disabled but FBC enabled */
/*
* FIXME this is racy. FBC might get enabled later.
* What we should check here is whether FBC can be
* enabled sometime later.
*/
if (IS_GEN5(dev) && !merged->fbc_wm_enabled &&
intel_fbc_is_active(dev_priv)) {
for (level = 2; level <= max_level; level++) {
struct intel_wm_level *wm = &merged->wm[level];
wm->enable = false;
}
}
}
static int ilk_wm_lp_to_level(int wm_lp, const struct intel_pipe_wm *pipe_wm)
{
/* LP1,LP2,LP3 levels are either 1,2,3 or 1,3,4 */
return wm_lp + (wm_lp >= 2 && pipe_wm->wm[4].enable);
}
/* The value we need to program into the WM_LPx latency field */
static unsigned int ilk_wm_lp_latency(struct drm_device *dev, int level)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
return 2 * level;
else
return dev_priv->wm.pri_latency[level];
}
static void ilk_compute_wm_results(struct drm_device *dev,
const struct intel_pipe_wm *merged,
enum intel_ddb_partitioning partitioning,
struct ilk_wm_values *results)
{
struct intel_crtc *intel_crtc;
int level, wm_lp;
results->enable_fbc_wm = merged->fbc_wm_enabled;
results->partitioning = partitioning;
/* LP1+ register values */
for (wm_lp = 1; wm_lp <= 3; wm_lp++) {
const struct intel_wm_level *r;
level = ilk_wm_lp_to_level(wm_lp, merged);
r = &merged->wm[level];
/*
* Maintain the watermark values even if the level is
* disabled. Doing otherwise could cause underruns.
*/
results->wm_lp[wm_lp - 1] =
(ilk_wm_lp_latency(dev, level) << WM1_LP_LATENCY_SHIFT) |
(r->pri_val << WM1_LP_SR_SHIFT) |
r->cur_val;
if (r->enable)
results->wm_lp[wm_lp - 1] |= WM1_LP_SR_EN;
if (INTEL_INFO(dev)->gen >= 8)
results->wm_lp[wm_lp - 1] |=
r->fbc_val << WM1_LP_FBC_SHIFT_BDW;
else
results->wm_lp[wm_lp - 1] |=
r->fbc_val << WM1_LP_FBC_SHIFT;
/*
* Always set WM1S_LP_EN when spr_val != 0, even if the
* level is disabled. Doing otherwise could cause underruns.
*/
if (INTEL_INFO(dev)->gen <= 6 && r->spr_val) {
WARN_ON(wm_lp != 1);
results->wm_lp_spr[wm_lp - 1] = WM1S_LP_EN | r->spr_val;
} else
results->wm_lp_spr[wm_lp - 1] = r->spr_val;
}
/* LP0 register values */
for_each_intel_crtc(dev, intel_crtc) {
const struct intel_crtc_state *cstate =
to_intel_crtc_state(intel_crtc->base.state);
enum pipe pipe = intel_crtc->pipe;
const struct intel_wm_level *r = &cstate->wm.optimal.ilk.wm[0];
if (WARN_ON(!r->enable))
continue;
results->wm_linetime[pipe] = cstate->wm.optimal.ilk.linetime;
results->wm_pipe[pipe] =
(r->pri_val << WM0_PIPE_PLANE_SHIFT) |
(r->spr_val << WM0_PIPE_SPRITE_SHIFT) |
r->cur_val;
}
}
/* Find the result with the highest level enabled. Check for enable_fbc_wm in
* case both are at the same level. Prefer r1 in case they're the same. */
static struct intel_pipe_wm *ilk_find_best_result(struct drm_device *dev,
struct intel_pipe_wm *r1,
struct intel_pipe_wm *r2)
{
int level, max_level = ilk_wm_max_level(dev);
int level1 = 0, level2 = 0;
for (level = 1; level <= max_level; level++) {
if (r1->wm[level].enable)
level1 = level;
if (r2->wm[level].enable)
level2 = level;
}
if (level1 == level2) {
if (r2->fbc_wm_enabled && !r1->fbc_wm_enabled)
return r2;
else
return r1;
} else if (level1 > level2) {
return r1;
} else {
return r2;
}
}
/* dirty bits used to track which watermarks need changes */
#define WM_DIRTY_PIPE(pipe) (1 << (pipe))
#define WM_DIRTY_LINETIME(pipe) (1 << (8 + (pipe)))
#define WM_DIRTY_LP(wm_lp) (1 << (15 + (wm_lp)))
#define WM_DIRTY_LP_ALL (WM_DIRTY_LP(1) | WM_DIRTY_LP(2) | WM_DIRTY_LP(3))
#define WM_DIRTY_FBC (1 << 24)
#define WM_DIRTY_DDB (1 << 25)
static unsigned int ilk_compute_wm_dirty(struct drm_i915_private *dev_priv,
const struct ilk_wm_values *old,
const struct ilk_wm_values *new)
{
unsigned int dirty = 0;
enum pipe pipe;
int wm_lp;
for_each_pipe(dev_priv, pipe) {
if (old->wm_linetime[pipe] != new->wm_linetime[pipe]) {
dirty |= WM_DIRTY_LINETIME(pipe);
/* Must disable LP1+ watermarks too */
dirty |= WM_DIRTY_LP_ALL;
}
if (old->wm_pipe[pipe] != new->wm_pipe[pipe]) {
dirty |= WM_DIRTY_PIPE(pipe);
/* Must disable LP1+ watermarks too */
dirty |= WM_DIRTY_LP_ALL;
}
}
if (old->enable_fbc_wm != new->enable_fbc_wm) {
dirty |= WM_DIRTY_FBC;
/* Must disable LP1+ watermarks too */
dirty |= WM_DIRTY_LP_ALL;
}
if (old->partitioning != new->partitioning) {
dirty |= WM_DIRTY_DDB;
/* Must disable LP1+ watermarks too */
dirty |= WM_DIRTY_LP_ALL;
}
/* LP1+ watermarks already deemed dirty, no need to continue */
if (dirty & WM_DIRTY_LP_ALL)
return dirty;
/* Find the lowest numbered LP1+ watermark in need of an update... */
for (wm_lp = 1; wm_lp <= 3; wm_lp++) {
if (old->wm_lp[wm_lp - 1] != new->wm_lp[wm_lp - 1] ||
old->wm_lp_spr[wm_lp - 1] != new->wm_lp_spr[wm_lp - 1])
break;
}
/* ...and mark it and all higher numbered LP1+ watermarks as dirty */
for (; wm_lp <= 3; wm_lp++)
dirty |= WM_DIRTY_LP(wm_lp);
return dirty;
}
static bool _ilk_disable_lp_wm(struct drm_i915_private *dev_priv,
unsigned int dirty)
{
struct ilk_wm_values *previous = &dev_priv->wm.hw;
bool changed = false;
if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] & WM1_LP_SR_EN) {
previous->wm_lp[2] &= ~WM1_LP_SR_EN;
I915_WRITE(WM3_LP_ILK, previous->wm_lp[2]);
changed = true;
}
if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] & WM1_LP_SR_EN) {
previous->wm_lp[1] &= ~WM1_LP_SR_EN;
I915_WRITE(WM2_LP_ILK, previous->wm_lp[1]);
changed = true;
}
if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] & WM1_LP_SR_EN) {
previous->wm_lp[0] &= ~WM1_LP_SR_EN;
I915_WRITE(WM1_LP_ILK, previous->wm_lp[0]);
changed = true;
}
/*
* Don't touch WM1S_LP_EN here.
* Doing so could cause underruns.
*/
return changed;
}
/*
* The spec says we shouldn't write when we don't need, because every write
* causes WMs to be re-evaluated, expending some power.
*/
static void ilk_write_wm_values(struct drm_i915_private *dev_priv,
struct ilk_wm_values *results)
{
struct drm_device *dev = dev_priv->dev;
struct ilk_wm_values *previous = &dev_priv->wm.hw;
unsigned int dirty;
uint32_t val;
dirty = ilk_compute_wm_dirty(dev_priv, previous, results);
if (!dirty)
return;
_ilk_disable_lp_wm(dev_priv, dirty);
if (dirty & WM_DIRTY_PIPE(PIPE_A))
I915_WRITE(WM0_PIPEA_ILK, results->wm_pipe[0]);
if (dirty & WM_DIRTY_PIPE(PIPE_B))
I915_WRITE(WM0_PIPEB_ILK, results->wm_pipe[1]);
if (dirty & WM_DIRTY_PIPE(PIPE_C))
I915_WRITE(WM0_PIPEC_IVB, results->wm_pipe[2]);
if (dirty & WM_DIRTY_LINETIME(PIPE_A))
I915_WRITE(PIPE_WM_LINETIME(PIPE_A), results->wm_linetime[0]);
if (dirty & WM_DIRTY_LINETIME(PIPE_B))
I915_WRITE(PIPE_WM_LINETIME(PIPE_B), results->wm_linetime[1]);
if (dirty & WM_DIRTY_LINETIME(PIPE_C))
I915_WRITE(PIPE_WM_LINETIME(PIPE_C), results->wm_linetime[2]);
if (dirty & WM_DIRTY_DDB) {
if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
val = I915_READ(WM_MISC);
if (results->partitioning == INTEL_DDB_PART_1_2)
val &= ~WM_MISC_DATA_PARTITION_5_6;
else
val |= WM_MISC_DATA_PARTITION_5_6;
I915_WRITE(WM_MISC, val);
} else {
val = I915_READ(DISP_ARB_CTL2);
if (results->partitioning == INTEL_DDB_PART_1_2)
val &= ~DISP_DATA_PARTITION_5_6;
else
val |= DISP_DATA_PARTITION_5_6;
I915_WRITE(DISP_ARB_CTL2, val);
}
}
if (dirty & WM_DIRTY_FBC) {
val = I915_READ(DISP_ARB_CTL);
if (results->enable_fbc_wm)
val &= ~DISP_FBC_WM_DIS;
else
val |= DISP_FBC_WM_DIS;
I915_WRITE(DISP_ARB_CTL, val);
}
if (dirty & WM_DIRTY_LP(1) &&
previous->wm_lp_spr[0] != results->wm_lp_spr[0])
I915_WRITE(WM1S_LP_ILK, results->wm_lp_spr[0]);
if (INTEL_INFO(dev)->gen >= 7) {
if (dirty & WM_DIRTY_LP(2) && previous->wm_lp_spr[1] != results->wm_lp_spr[1])
I915_WRITE(WM2S_LP_IVB, results->wm_lp_spr[1]);
if (dirty & WM_DIRTY_LP(3) && previous->wm_lp_spr[2] != results->wm_lp_spr[2])
I915_WRITE(WM3S_LP_IVB, results->wm_lp_spr[2]);
}
if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] != results->wm_lp[0])
I915_WRITE(WM1_LP_ILK, results->wm_lp[0]);
if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] != results->wm_lp[1])
I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2])
I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
dev_priv->wm.hw = *results;
}
static bool ilk_disable_lp_wm(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL);
}
/*
* On gen9, we need to allocate Display Data Buffer (DDB) portions to the
* different active planes.
*/
#define SKL_DDB_SIZE 896 /* in blocks */
#define BXT_DDB_SIZE 512
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
/*
* Return the index of a plane in the SKL DDB and wm result arrays. Primary
* plane is always in slot 0, cursor is always in slot I915_MAX_PLANES-1, and
* other universal planes are in indices 1..n. Note that this may leave unused
* indices between the top "sprite" plane and the cursor.
*/
static int
skl_wm_plane_id(const struct intel_plane *plane)
{
switch (plane->base.type) {
case DRM_PLANE_TYPE_PRIMARY:
return 0;
case DRM_PLANE_TYPE_CURSOR:
return PLANE_CURSOR;
case DRM_PLANE_TYPE_OVERLAY:
return plane->plane + 1;
default:
MISSING_CASE(plane->base.type);
return plane->plane;
}
}
static void
skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
const struct intel_crtc_state *cstate,
const struct intel_wm_config *config,
struct skl_ddb_entry *alloc /* out */)
{
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct drm_crtc *for_crtc = cstate->base.crtc;
struct drm_crtc *crtc;
unsigned int pipe_size, ddb_size;
int nth_active_pipe;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (!cstate->base.active) {
alloc->start = 0;
alloc->end = 0;
return;
}
if (IS_BROXTON(dev))
ddb_size = BXT_DDB_SIZE;
else
ddb_size = SKL_DDB_SIZE;
ddb_size -= 4; /* 4 blocks for bypass path allocation */
nth_active_pipe = 0;
for_each_crtc(dev, crtc) {
drm/i915: Use crtc->state->active in ilk/skl watermark calculations (v3) Existing watermark code calls intel_crtc_active() to determine whether a CRTC is active for the purpose of watermark calculations (and bails out early if it determines the CRTC is not active). However intel_crtc_active() only returns true if crtc->primary->fb is non-NULL, which isn't appropriate in the modern age of universal planes and atomic modeset since userspace can now disable the primary plane, but leave the CRTC (and other planes) running. Note that commit commit 0fda65680e92545caea5be7805a7f0a617fb6c20 Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Fri Feb 27 15:12:35 2015 +0000 drm/i915/skl: Update watermarks for Y tiling adds a test for primary plane enable/disable to trigger a watermark update (previously we ignored updates to primary planes, which wasn't really correct, but we got lucky since we always pretended the primary plane was on). Tvrtko's patch tries to update watermarks when we re-enable the primary plane, but that watermark computation gets aborted early because intel_crtc_active() returns false due to the disabled primary plane. Switch the ILK and SKL watermark code over to use crtc->state->active rather than calling intel_crtc_active() so that we'll properly compute watermarks when re-enabling the primary plane. Note that this commit doesn't touch callsites in the watermark code for older platforms since there were concerns that doing so would lead to other types of breakage. Also note that all of the watermark calculation at the moment takes place after new crtc/plane states are swapped into the DRM objects. This will change in the future, so we'll be working with in-flight state objects, but for the time being, crtc->state is what we want to operate on. v2: Don't drop primary->fb check from intel_crtc_active(), but rather replace ILK/SKL callsites with direct tests of crtc->state->active. There is concern that messing with intel_crtc_active() will lead to other breakage for old hardware platforms. (Ville) v3: Use intel_crtc->active for now rather than crtc->state->active since we don't have CRTC states properly hooked up and initialized yet. We'll defer the switch to crtc->state->active until the atomic CRTC state work is farther along. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 00:19:24 +07:00
if (!to_intel_crtc(crtc)->active)
continue;
if (crtc == for_crtc)
break;
nth_active_pipe++;
}
pipe_size = ddb_size / config->num_pipes_active;
alloc->start = nth_active_pipe * ddb_size / config->num_pipes_active;
alloc->end = alloc->start + pipe_size;
}
static unsigned int skl_cursor_allocation(const struct intel_wm_config *config)
{
if (config->num_pipes_active == 1)
return 32;
return 8;
}
static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
{
entry->start = reg & 0x3ff;
entry->end = (reg >> 16) & 0x3ff;
if (entry->end)
entry->end += 1;
}
void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
struct skl_ddb_allocation *ddb /* out */)
{
enum pipe pipe;
int plane;
u32 val;
memset(ddb, 0, sizeof(*ddb));
for_each_pipe(dev_priv, pipe) {
if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PIPE(pipe)))
continue;
for_each_plane(dev_priv, pipe, plane) {
val = I915_READ(PLANE_BUF_CFG(pipe, plane));
skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane],
val);
}
val = I915_READ(CUR_BUF_CFG(pipe));
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
skl_ddb_entry_init_from_hw(&ddb->plane[pipe][PLANE_CURSOR],
val);
}
}
static unsigned int
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
const struct drm_plane_state *pstate,
int y)
{
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
struct drm_framebuffer *fb = pstate->fb;
/* for planar format */
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (fb->pixel_format == DRM_FORMAT_NV12) {
if (y) /* y-plane data rate */
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
return intel_crtc->config->pipe_src_w *
intel_crtc->config->pipe_src_h *
drm_format_plane_cpp(fb->pixel_format, 0);
else /* uv-plane data rate */
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
return (intel_crtc->config->pipe_src_w/2) *
(intel_crtc->config->pipe_src_h/2) *
drm_format_plane_cpp(fb->pixel_format, 1);
}
/* for packed formats */
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
return intel_crtc->config->pipe_src_w *
intel_crtc->config->pipe_src_h *
drm_format_plane_cpp(fb->pixel_format, 0);
}
/*
* We don't overflow 32 bits. Worst case is 3 planes enabled, each fetching
* a 8192x4096@32bpp framebuffer:
* 3 * 4096 * 8192 * 4 < 2^32
*/
static unsigned int
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
skl_get_total_relative_data_rate(const struct intel_crtc_state *cstate)
{
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
struct drm_device *dev = intel_crtc->base.dev;
const struct intel_plane *intel_plane;
unsigned int total_data_rate = 0;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
const struct drm_plane_state *pstate = intel_plane->base.state;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (pstate->fb == NULL)
continue;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (intel_plane->base.type == DRM_PLANE_TYPE_CURSOR)
continue;
/* packed/uv */
total_data_rate += skl_plane_relative_data_rate(cstate,
pstate,
0);
if (pstate->fb->pixel_format == DRM_FORMAT_NV12)
/* y-plane */
total_data_rate += skl_plane_relative_data_rate(cstate,
pstate,
1);
}
return total_data_rate;
}
static void
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
struct skl_ddb_allocation *ddb /* out */)
{
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct drm_crtc *crtc = cstate->base.crtc;
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_wm_config *config = &dev_priv->wm.config;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct intel_plane *intel_plane;
enum pipe pipe = intel_crtc->pipe;
struct skl_ddb_entry *alloc = &ddb->pipe[pipe];
uint16_t alloc_size, start, cursor_blocks;
uint16_t minimum[I915_MAX_PLANES];
uint16_t y_minimum[I915_MAX_PLANES];
unsigned int total_data_rate;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
skl_ddb_get_pipe_allocation_limits(dev, cstate, config, alloc);
alloc_size = skl_ddb_entry_size(alloc);
if (alloc_size == 0) {
memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe]));
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
memset(&ddb->plane[pipe][PLANE_CURSOR], 0,
sizeof(ddb->plane[pipe][PLANE_CURSOR]));
return;
}
cursor_blocks = skl_cursor_allocation(config);
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
ddb->plane[pipe][PLANE_CURSOR].start = alloc->end - cursor_blocks;
ddb->plane[pipe][PLANE_CURSOR].end = alloc->end;
alloc_size -= cursor_blocks;
alloc->end -= cursor_blocks;
/* 1. Allocate the mininum required blocks for each active plane */
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
struct drm_plane *plane = &intel_plane->base;
struct drm_framebuffer *fb = plane->state->fb;
int id = skl_wm_plane_id(intel_plane);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (fb == NULL)
continue;
if (plane->type == DRM_PLANE_TYPE_CURSOR)
continue;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
minimum[id] = 8;
alloc_size -= minimum[id];
y_minimum[id] = (fb->pixel_format == DRM_FORMAT_NV12) ? 8 : 0;
alloc_size -= y_minimum[id];
}
/*
* 2. Distribute the remaining space in proportion to the amount of
* data each plane needs to fetch from memory.
*
* FIXME: we may not allocate every single block here.
*/
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
total_data_rate = skl_get_total_relative_data_rate(cstate);
start = alloc->start;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
struct drm_plane *plane = &intel_plane->base;
struct drm_plane_state *pstate = intel_plane->base.state;
unsigned int data_rate, y_data_rate;
uint16_t plane_blocks, y_plane_blocks = 0;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
int id = skl_wm_plane_id(intel_plane);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (pstate->fb == NULL)
continue;
if (plane->type == DRM_PLANE_TYPE_CURSOR)
continue;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
data_rate = skl_plane_relative_data_rate(cstate, pstate, 0);
/*
* allocation for (packed formats) or (uv-plane part of planar format):
* promote the expression to 64 bits to avoid overflowing, the
* result is < available as data_rate / total_data_rate < 1
*/
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
plane_blocks = minimum[id];
plane_blocks += div_u64((uint64_t)alloc_size * data_rate,
total_data_rate);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
ddb->plane[pipe][id].start = start;
ddb->plane[pipe][id].end = start + plane_blocks;
start += plane_blocks;
/*
* allocation for y_plane part of planar format:
*/
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (pstate->fb->pixel_format == DRM_FORMAT_NV12) {
y_data_rate = skl_plane_relative_data_rate(cstate,
pstate,
1);
y_plane_blocks = y_minimum[id];
y_plane_blocks += div_u64((uint64_t)alloc_size * y_data_rate,
total_data_rate);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
ddb->y_plane[pipe][id].start = start;
ddb->y_plane[pipe][id].end = start + y_plane_blocks;
start += y_plane_blocks;
}
}
}
static uint32_t skl_pipe_pixel_rate(const struct intel_crtc_state *config)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
{
/* TODO: Take into account the scalers once we support them */
return config->base.adjusted_mode.crtc_clock;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
}
/*
* The max latency should be 257 (max the punit can code is 255 and we add 2us
* for the read latency) and cpp should always be <= 8, so that
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
* should allow pixel_rate up to ~2 GHz which seems sufficient since max
* 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
*/
static uint32_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, uint32_t latency)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
{
uint32_t wm_intermediate_val, ret;
if (latency == 0)
return UINT_MAX;
wm_intermediate_val = latency * pixel_rate * cpp / 512;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
ret = DIV_ROUND_UP(wm_intermediate_val, 1000);
return ret;
}
static uint32_t skl_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
uint32_t horiz_pixels, uint8_t cpp,
uint64_t tiling, uint32_t latency)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
{
uint32_t ret;
uint32_t plane_bytes_per_line, plane_blocks_per_line;
uint32_t wm_intermediate_val;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
if (latency == 0)
return UINT_MAX;
plane_bytes_per_line = horiz_pixels * cpp;
if (tiling == I915_FORMAT_MOD_Y_TILED ||
tiling == I915_FORMAT_MOD_Yf_TILED) {
plane_bytes_per_line *= 4;
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
plane_blocks_per_line /= 4;
} else {
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
}
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
wm_intermediate_val = latency * pixel_rate;
ret = DIV_ROUND_UP(wm_intermediate_val, pipe_htotal * 1000) *
plane_blocks_per_line;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
return ret;
}
static bool skl_ddb_allocation_changed(const struct skl_ddb_allocation *new_ddb,
const struct intel_crtc *intel_crtc)
{
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
const struct skl_ddb_allocation *cur_ddb = &dev_priv->wm.skl_hw.ddb;
/*
* If ddb allocation of pipes changed, it may require recalculation of
* watermarks
*/
if (memcmp(new_ddb->pipe, cur_ddb->pipe, sizeof(new_ddb->pipe)))
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
return true;
return false;
}
static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct intel_crtc_state *cstate,
struct intel_plane *intel_plane,
uint16_t ddb_allocation,
int level,
uint16_t *out_blocks, /* out */
uint8_t *out_lines /* out */)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
{
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct drm_plane *plane = &intel_plane->base;
struct drm_framebuffer *fb = plane->state->fb;
uint32_t latency = dev_priv->wm.skl_latency[level];
uint32_t method1, method2;
uint32_t plane_bytes_per_line, plane_blocks_per_line;
uint32_t res_blocks, res_lines;
uint32_t selected_result;
uint8_t cpp;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (latency == 0 || !cstate->base.active || !fb)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
return false;
cpp = drm_format_plane_cpp(fb->pixel_format, 0);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
method1 = skl_wm_method1(skl_pipe_pixel_rate(cstate),
cpp, latency);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate),
cstate->base.adjusted_mode.crtc_htotal,
cstate->pipe_src_w,
cpp, fb->modifier[0],
latency);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
plane_bytes_per_line = cstate->pipe_src_w * cpp;
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
uint32_t min_scanlines = 4;
uint32_t y_tile_minimum;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (intel_rotation_90_or_270(plane->state->rotation)) {
int cpp = (fb->pixel_format == DRM_FORMAT_NV12) ?
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
drm_format_plane_cpp(fb->pixel_format, 1) :
drm_format_plane_cpp(fb->pixel_format, 0);
switch (cpp) {
case 1:
min_scanlines = 16;
break;
case 2:
min_scanlines = 8;
break;
case 8:
WARN(1, "Unsupported pixel depth for rotation");
}
}
y_tile_minimum = plane_blocks_per_line * min_scanlines;
selected_result = max(method2, y_tile_minimum);
} else {
if ((ddb_allocation / plane_blocks_per_line) >= 1)
selected_result = min(method1, method2);
else
selected_result = method1;
}
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
res_blocks = selected_result + 1;
res_lines = DIV_ROUND_UP(selected_result, plane_blocks_per_line);
if (level >= 1 && level <= 7) {
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED)
res_lines += 4;
else
res_blocks++;
}
if (res_blocks >= ddb_allocation || res_lines > 31)
return false;
*out_blocks = res_blocks;
*out_lines = res_lines;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
return true;
}
static void skl_compute_wm_level(const struct drm_i915_private *dev_priv,
struct skl_ddb_allocation *ddb,
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct intel_crtc_state *cstate,
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
int level,
struct skl_wm_level *result)
{
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct drm_device *dev = dev_priv->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
struct intel_plane *intel_plane;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
uint16_t ddb_blocks;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
enum pipe pipe = intel_crtc->pipe;
for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
int i = skl_wm_plane_id(intel_plane);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
ddb_blocks = skl_ddb_entry_size(&ddb->plane[pipe][i]);
result->plane_en[i] = skl_compute_plane_wm(dev_priv,
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
cstate,
intel_plane,
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
ddb_blocks,
level,
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
&result->plane_res_b[i],
&result->plane_res_l[i]);
}
}
static uint32_t
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
skl_compute_linetime_wm(struct intel_crtc_state *cstate)
{
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (!cstate->base.active)
return 0;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (WARN_ON(skl_pipe_pixel_rate(cstate) == 0))
return 0;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
return DIV_ROUND_UP(8 * cstate->base.adjusted_mode.crtc_htotal * 1000,
skl_pipe_pixel_rate(cstate));
}
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
static void skl_compute_transition_wm(struct intel_crtc_state *cstate,
struct skl_wm_level *trans_wm /* out */)
{
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct drm_crtc *crtc = cstate->base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct intel_plane *intel_plane;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
if (!cstate->base.active)
return;
/* Until we know more, just disable transition WMs */
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
for_each_intel_plane_on_crtc(crtc->dev, intel_crtc, intel_plane) {
int i = skl_wm_plane_id(intel_plane);
trans_wm->plane_en[i] = false;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
}
}
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
static void skl_compute_pipe_wm(struct intel_crtc_state *cstate,
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
struct skl_ddb_allocation *ddb,
struct skl_pipe_wm *pipe_wm)
{
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct drm_device *dev = cstate->base.crtc->dev;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
const struct drm_i915_private *dev_priv = dev->dev_private;
int level, max_level = ilk_wm_max_level(dev);
for (level = 0; level <= max_level; level++) {
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
skl_compute_wm_level(dev_priv, ddb, cstate,
level, &pipe_wm->wm[level]);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
}
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
pipe_wm->linetime = skl_compute_linetime_wm(cstate);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
skl_compute_transition_wm(cstate, &pipe_wm->trans_wm);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
}
static void skl_compute_wm_results(struct drm_device *dev,
struct skl_pipe_wm *p_wm,
struct skl_wm_values *r,
struct intel_crtc *intel_crtc)
{
int level, max_level = ilk_wm_max_level(dev);
enum pipe pipe = intel_crtc->pipe;
uint32_t temp;
int i;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
for (level = 0; level <= max_level; level++) {
for (i = 0; i < intel_num_planes(intel_crtc); i++) {
temp = 0;
temp |= p_wm->wm[level].plane_res_l[i] <<
PLANE_WM_LINES_SHIFT;
temp |= p_wm->wm[level].plane_res_b[i];
if (p_wm->wm[level].plane_en[i])
temp |= PLANE_WM_EN;
r->plane[pipe][i][level] = temp;
}
temp = 0;
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
temp |= p_wm->wm[level].plane_res_l[PLANE_CURSOR] << PLANE_WM_LINES_SHIFT;
temp |= p_wm->wm[level].plane_res_b[PLANE_CURSOR];
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
if (p_wm->wm[level].plane_en[PLANE_CURSOR])
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
temp |= PLANE_WM_EN;
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
r->plane[pipe][PLANE_CURSOR][level] = temp;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
}
/* transition WMs */
for (i = 0; i < intel_num_planes(intel_crtc); i++) {
temp = 0;
temp |= p_wm->trans_wm.plane_res_l[i] << PLANE_WM_LINES_SHIFT;
temp |= p_wm->trans_wm.plane_res_b[i];
if (p_wm->trans_wm.plane_en[i])
temp |= PLANE_WM_EN;
r->plane_trans[pipe][i] = temp;
}
temp = 0;
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
temp |= p_wm->trans_wm.plane_res_l[PLANE_CURSOR] << PLANE_WM_LINES_SHIFT;
temp |= p_wm->trans_wm.plane_res_b[PLANE_CURSOR];
if (p_wm->trans_wm.plane_en[PLANE_CURSOR])
temp |= PLANE_WM_EN;
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
r->plane_trans[pipe][PLANE_CURSOR] = temp;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
r->wm_linetime[pipe] = p_wm->linetime;
}
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
static void skl_ddb_entry_write(struct drm_i915_private *dev_priv,
i915_reg_t reg,
const struct skl_ddb_entry *entry)
{
if (entry->end)
I915_WRITE(reg, (entry->end - 1) << 16 | entry->start);
else
I915_WRITE(reg, 0);
}
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
static void skl_write_wm_values(struct drm_i915_private *dev_priv,
const struct skl_wm_values *new)
{
struct drm_device *dev = dev_priv->dev;
struct intel_crtc *crtc;
for_each_intel_crtc(dev, crtc) {
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
int i, level, max_level = ilk_wm_max_level(dev);
enum pipe pipe = crtc->pipe;
if (!new->dirty[pipe])
continue;
I915_WRITE(PIPE_WM_LINETIME(pipe), new->wm_linetime[pipe]);
for (level = 0; level <= max_level; level++) {
for (i = 0; i < intel_num_planes(crtc); i++)
I915_WRITE(PLANE_WM(pipe, i, level),
new->plane[pipe][i][level]);
I915_WRITE(CUR_WM(pipe, level),
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
new->plane[pipe][PLANE_CURSOR][level]);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
}
for (i = 0; i < intel_num_planes(crtc); i++)
I915_WRITE(PLANE_WM_TRANS(pipe, i),
new->plane_trans[pipe][i]);
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
I915_WRITE(CUR_WM_TRANS(pipe),
new->plane_trans[pipe][PLANE_CURSOR]);
for (i = 0; i < intel_num_planes(crtc); i++) {
skl_ddb_entry_write(dev_priv,
PLANE_BUF_CFG(pipe, i),
&new->ddb.plane[pipe][i]);
skl_ddb_entry_write(dev_priv,
PLANE_NV12_BUF_CFG(pipe, i),
&new->ddb.y_plane[pipe][i]);
}
skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe),
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
&new->ddb.plane[pipe][PLANE_CURSOR]);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
}
}
/*
* When setting up a new DDB allocation arrangement, we need to correctly
* sequence the times at which the new allocations for the pipes are taken into
* account or we'll have pipes fetching from space previously allocated to
* another pipe.
*
* Roughly the sequence looks like:
* 1. re-allocate the pipe(s) with the allocation being reduced and not
* overlapping with a previous light-up pipe (another way to put it is:
* pipes with their new allocation strickly included into their old ones).
* 2. re-allocate the other pipes that get their allocation reduced
* 3. allocate the pipes having their allocation increased
*
* Steps 1. and 2. are here to take care of the following case:
* - Initially DDB looks like this:
* | B | C |
* - enable pipe A.
* - pipe B has a reduced DDB allocation that overlaps with the old pipe C
* allocation
* | A | B | C |
*
* We need to sequence the re-allocation: C, B, A (and not B, C, A).
*/
static void
skl_wm_flush_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, int pass)
{
int plane;
DRM_DEBUG_KMS("flush pipe %c (pass %d)\n", pipe_name(pipe), pass);
for_each_plane(dev_priv, pipe, plane) {
I915_WRITE(PLANE_SURF(pipe, plane),
I915_READ(PLANE_SURF(pipe, plane)));
}
I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
}
static bool
skl_ddb_allocation_included(const struct skl_ddb_allocation *old,
const struct skl_ddb_allocation *new,
enum pipe pipe)
{
uint16_t old_size, new_size;
old_size = skl_ddb_entry_size(&old->pipe[pipe]);
new_size = skl_ddb_entry_size(&new->pipe[pipe]);
return old_size != new_size &&
new->pipe[pipe].start >= old->pipe[pipe].start &&
new->pipe[pipe].end <= old->pipe[pipe].end;
}
static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
struct skl_wm_values *new_values)
{
struct drm_device *dev = dev_priv->dev;
struct skl_ddb_allocation *cur_ddb, *new_ddb;
bool reallocated[I915_MAX_PIPES] = {};
struct intel_crtc *crtc;
enum pipe pipe;
new_ddb = &new_values->ddb;
cur_ddb = &dev_priv->wm.skl_hw.ddb;
/*
* First pass: flush the pipes with the new allocation contained into
* the old space.
*
* We'll wait for the vblank on those pipes to ensure we can safely
* re-allocate the freed space without this pipe fetching from it.
*/
for_each_intel_crtc(dev, crtc) {
if (!crtc->active)
continue;
pipe = crtc->pipe;
if (!skl_ddb_allocation_included(cur_ddb, new_ddb, pipe))
continue;
skl_wm_flush_pipe(dev_priv, pipe, 1);
intel_wait_for_vblank(dev, pipe);
reallocated[pipe] = true;
}
/*
* Second pass: flush the pipes that are having their allocation
* reduced, but overlapping with a previous allocation.
*
* Here as well we need to wait for the vblank to make sure the freed
* space is not used anymore.
*/
for_each_intel_crtc(dev, crtc) {
if (!crtc->active)
continue;
pipe = crtc->pipe;
if (reallocated[pipe])
continue;
if (skl_ddb_entry_size(&new_ddb->pipe[pipe]) <
skl_ddb_entry_size(&cur_ddb->pipe[pipe])) {
skl_wm_flush_pipe(dev_priv, pipe, 2);
intel_wait_for_vblank(dev, pipe);
reallocated[pipe] = true;
}
}
/*
* Third pass: flush the pipes that got more space allocated.
*
* We don't need to actively wait for the update here, next vblank
* will just get more DDB space with the correct WM values.
*/
for_each_intel_crtc(dev, crtc) {
if (!crtc->active)
continue;
pipe = crtc->pipe;
/*
* At this point, only the pipes more space than before are
* left to re-allocate.
*/
if (reallocated[pipe])
continue;
skl_wm_flush_pipe(dev_priv, pipe, 3);
}
}
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
static bool skl_update_pipe_wm(struct drm_crtc *crtc,
struct skl_ddb_allocation *ddb, /* out */
struct skl_pipe_wm *pipe_wm /* out */)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
skl_allocate_pipe_ddb(cstate, ddb);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
skl_compute_pipe_wm(cstate, ddb, pipe_wm);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
if (!memcmp(&intel_crtc->wm.active.skl, pipe_wm, sizeof(*pipe_wm)))
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
return false;
intel_crtc->wm.active.skl = *pipe_wm;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
return true;
}
static void skl_update_other_pipe_wm(struct drm_device *dev,
struct drm_crtc *crtc,
struct skl_wm_values *r)
{
struct intel_crtc *intel_crtc;
struct intel_crtc *this_crtc = to_intel_crtc(crtc);
/*
* If the WM update hasn't changed the allocation for this_crtc (the
* crtc we are currently computing the new WM values for), other
* enabled crtcs will keep the same allocation and we don't need to
* recompute anything for them.
*/
if (!skl_ddb_allocation_changed(&r->ddb, this_crtc))
return;
/*
* Otherwise, because of this_crtc being freshly enabled/disabled, the
* other active pipes need new DDB allocation and WM values.
*/
for_each_intel_crtc(dev, intel_crtc) {
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
struct skl_pipe_wm pipe_wm = {};
bool wm_changed;
if (this_crtc->pipe == intel_crtc->pipe)
continue;
if (!intel_crtc->active)
continue;
wm_changed = skl_update_pipe_wm(&intel_crtc->base,
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
&r->ddb, &pipe_wm);
/*
* If we end up re-computing the other pipe WM values, it's
* because it was really needed, so we expect the WM values to
* be different.
*/
WARN_ON(!wm_changed);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-25 05:53:11 +07:00
skl_compute_wm_results(dev, &pipe_wm, r, intel_crtc);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
r->dirty[intel_crtc->pipe] = true;
}
}
static void skl_clear_wm(struct skl_wm_values *watermarks, enum pipe pipe)
{
watermarks->wm_linetime[pipe] = 0;
memset(watermarks->plane[pipe], 0,
sizeof(uint32_t) * 8 * I915_MAX_PLANES);
memset(watermarks->plane_trans[pipe],
0, sizeof(uint32_t) * I915_MAX_PLANES);
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
watermarks->plane_trans[pipe][PLANE_CURSOR] = 0;
/* Clear ddb entries for pipe */
memset(&watermarks->ddb.pipe[pipe], 0, sizeof(struct skl_ddb_entry));
memset(&watermarks->ddb.plane[pipe], 0,
sizeof(struct skl_ddb_entry) * I915_MAX_PLANES);
memset(&watermarks->ddb.y_plane[pipe], 0,
sizeof(struct skl_ddb_entry) * I915_MAX_PLANES);
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
memset(&watermarks->ddb.plane[pipe][PLANE_CURSOR], 0,
sizeof(struct skl_ddb_entry));
}
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
static void skl_update_wm(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct skl_wm_values *results = &dev_priv->wm.skl_results;
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct skl_pipe_wm *pipe_wm = &cstate->wm.optimal.skl;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
/* Clear all dirty flags */
memset(results->dirty, 0, sizeof(bool) * I915_MAX_PIPES);
skl_clear_wm(results, intel_crtc->pipe);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
if (!skl_update_pipe_wm(crtc, &results->ddb, pipe_wm))
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
return;
skl_compute_wm_results(dev, pipe_wm, results, intel_crtc);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
results->dirty[intel_crtc->pipe] = true;
skl_update_other_pipe_wm(dev, crtc, results);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
skl_write_wm_values(dev_priv, results);
skl_flush_wm_values(dev_priv, results);
/* store the new configuration */
dev_priv->wm.skl_hw = *results;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
}
static void ilk_compute_wm_config(struct drm_device *dev,
struct intel_wm_config *config)
{
struct intel_crtc *crtc;
/* Compute the currently _active_ config */
for_each_intel_crtc(dev, crtc) {
const struct intel_pipe_wm *wm = &crtc->wm.active.ilk;
if (!wm->pipe_enabled)
continue;
config->sprites_enabled |= wm->sprites_enabled;
config->sprites_scaled |= wm->sprites_scaled;
config->num_pipes_active++;
}
}
static void ilk_program_watermarks(struct intel_crtc_state *cstate)
{
struct drm_crtc *crtc = cstate->base.crtc;
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_pipe_wm lp_wm_1_2 = {}, lp_wm_5_6 = {}, *best_lp_wm;
struct ilk_wm_maximums max;
struct intel_wm_config config = {};
struct ilk_wm_values results = {};
enum intel_ddb_partitioning partitioning;
ilk_compute_wm_config(dev, &config);
ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_1_2, &max);
ilk_wm_merge(dev, &config, &max, &lp_wm_1_2);
/* 5/6 split only in single pipe config on IVB+ */
if (INTEL_INFO(dev)->gen >= 7 &&
config.num_pipes_active == 1 && config.sprites_enabled) {
ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_5_6, &max);
ilk_wm_merge(dev, &config, &max, &lp_wm_5_6);
best_lp_wm = ilk_find_best_result(dev, &lp_wm_1_2, &lp_wm_5_6);
} else {
best_lp_wm = &lp_wm_1_2;
}
partitioning = (best_lp_wm == &lp_wm_1_2) ?
INTEL_DDB_PART_1_2 : INTEL_DDB_PART_5_6;
ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results);
ilk_write_wm_values(dev_priv, &results);
}
static void ilk_update_wm(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
WARN_ON(cstate->base.active != intel_crtc->active);
/*
* IVB workaround: must disable low power watermarks for at least
* one frame before enabling scaling. LP watermarks can be re-enabled
* when scaling is disabled.
*
* WaCxSRDisabledForSpriteScaling:ivb
*/
if (cstate->disable_lp_wm) {
ilk_disable_lp_wm(crtc->dev);
intel_wait_for_vblank(crtc->dev, intel_crtc->pipe);
drm/i915: Add two-stage ILK-style watermark programming (v10) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452108870-24204-1-git-send-email-matthew.d.roper@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-01-07 02:34:30 +07:00
}
intel_crtc->wm.active.ilk = cstate->wm.optimal.ilk;
ilk_program_watermarks(cstate);
}
static void skl_pipe_wm_active_state(uint32_t val,
struct skl_pipe_wm *active,
bool is_transwm,
bool is_cursor,
int i,
int level)
{
bool is_enabled = (val & PLANE_WM_EN) != 0;
if (!is_transwm) {
if (!is_cursor) {
active->wm[level].plane_en[i] = is_enabled;
active->wm[level].plane_res_b[i] =
val & PLANE_WM_BLOCKS_MASK;
active->wm[level].plane_res_l[i] =
(val >> PLANE_WM_LINES_SHIFT) &
PLANE_WM_LINES_MASK;
} else {
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
active->wm[level].plane_en[PLANE_CURSOR] = is_enabled;
active->wm[level].plane_res_b[PLANE_CURSOR] =
val & PLANE_WM_BLOCKS_MASK;
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
active->wm[level].plane_res_l[PLANE_CURSOR] =
(val >> PLANE_WM_LINES_SHIFT) &
PLANE_WM_LINES_MASK;
}
} else {
if (!is_cursor) {
active->trans_wm.plane_en[i] = is_enabled;
active->trans_wm.plane_res_b[i] =
val & PLANE_WM_BLOCKS_MASK;
active->trans_wm.plane_res_l[i] =
(val >> PLANE_WM_LINES_SHIFT) &
PLANE_WM_LINES_MASK;
} else {
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
active->trans_wm.plane_en[PLANE_CURSOR] = is_enabled;
active->trans_wm.plane_res_b[PLANE_CURSOR] =
val & PLANE_WM_BLOCKS_MASK;
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
active->trans_wm.plane_res_l[PLANE_CURSOR] =
(val >> PLANE_WM_LINES_SHIFT) &
PLANE_WM_LINES_MASK;
}
}
}
static void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct skl_wm_values *hw = &dev_priv->wm.skl_hw;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct skl_pipe_wm *active = &cstate->wm.optimal.skl;
enum pipe pipe = intel_crtc->pipe;
int level, i, max_level;
uint32_t temp;
max_level = ilk_wm_max_level(dev);
hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
for (level = 0; level <= max_level; level++) {
for (i = 0; i < intel_num_planes(intel_crtc); i++)
hw->plane[pipe][i][level] =
I915_READ(PLANE_WM(pipe, i, level));
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
hw->plane[pipe][PLANE_CURSOR][level] = I915_READ(CUR_WM(pipe, level));
}
for (i = 0; i < intel_num_planes(intel_crtc); i++)
hw->plane_trans[pipe][i] = I915_READ(PLANE_WM_TRANS(pipe, i));
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
hw->plane_trans[pipe][PLANE_CURSOR] = I915_READ(CUR_WM_TRANS(pipe));
drm/i915: Use crtc->state->active in ilk/skl watermark calculations (v3) Existing watermark code calls intel_crtc_active() to determine whether a CRTC is active for the purpose of watermark calculations (and bails out early if it determines the CRTC is not active). However intel_crtc_active() only returns true if crtc->primary->fb is non-NULL, which isn't appropriate in the modern age of universal planes and atomic modeset since userspace can now disable the primary plane, but leave the CRTC (and other planes) running. Note that commit commit 0fda65680e92545caea5be7805a7f0a617fb6c20 Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Fri Feb 27 15:12:35 2015 +0000 drm/i915/skl: Update watermarks for Y tiling adds a test for primary plane enable/disable to trigger a watermark update (previously we ignored updates to primary planes, which wasn't really correct, but we got lucky since we always pretended the primary plane was on). Tvrtko's patch tries to update watermarks when we re-enable the primary plane, but that watermark computation gets aborted early because intel_crtc_active() returns false due to the disabled primary plane. Switch the ILK and SKL watermark code over to use crtc->state->active rather than calling intel_crtc_active() so that we'll properly compute watermarks when re-enabling the primary plane. Note that this commit doesn't touch callsites in the watermark code for older platforms since there were concerns that doing so would lead to other types of breakage. Also note that all of the watermark calculation at the moment takes place after new crtc/plane states are swapped into the DRM objects. This will change in the future, so we'll be working with in-flight state objects, but for the time being, crtc->state is what we want to operate on. v2: Don't drop primary->fb check from intel_crtc_active(), but rather replace ILK/SKL callsites with direct tests of crtc->state->active. There is concern that messing with intel_crtc_active() will lead to other breakage for old hardware platforms. (Ville) v3: Use intel_crtc->active for now rather than crtc->state->active since we don't have CRTC states properly hooked up and initialized yet. We'll defer the switch to crtc->state->active until the atomic CRTC state work is farther along. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 00:19:24 +07:00
if (!intel_crtc->active)
return;
hw->dirty[pipe] = true;
active->linetime = hw->wm_linetime[pipe];
for (level = 0; level <= max_level; level++) {
for (i = 0; i < intel_num_planes(intel_crtc); i++) {
temp = hw->plane[pipe][i][level];
skl_pipe_wm_active_state(temp, active, false,
false, i, level);
}
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
temp = hw->plane[pipe][PLANE_CURSOR][level];
skl_pipe_wm_active_state(temp, active, false, true, i, level);
}
for (i = 0; i < intel_num_planes(intel_crtc); i++) {
temp = hw->plane_trans[pipe][i];
skl_pipe_wm_active_state(temp, active, true, false, i, 0);
}
drm/i915/skl: Simplify wm structures slightly (v2) A bunch of SKL watermark-related structures have the cursor plane as a separate entry from the rest of the planes. Since a previous patch updated I915_MAX_PLANES such that those plane arrays now have a slot for the cursor, update the code to use the new slot in the existing plane arrays and kill off the cursor-specific structures. There shouldn't be any functional change here; this is just shuffling around how the data is stored in some of the data structures. The whole patch is generated with Coccinelle via the following semantic patch: @@ struct skl_pipe_wm_parameters WMP; @@ - WMP.cursor + WMP.plane[PLANE_CURSOR] @@ struct skl_pipe_wm_parameters *WMP; @@ - WMP->cursor + WMP->plane[PLANE_CURSOR] @@ @@ struct skl_pipe_wm_parameters { ... - struct intel_plane_wm_parameters cursor; ... }; @@ struct skl_ddb_allocation DDB; expression E; @@ - DDB.cursor[E] + DDB.plane[E][PLANE_CURSOR] @@ struct skl_ddb_allocation *DDB; expression E; @@ - DDB->cursor[E] + DDB->plane[E][PLANE_CURSOR] @@ @@ struct skl_ddb_allocation { ... - struct skl_ddb_entry cursor[I915_MAX_PIPES]; ... }; @@ struct skl_wm_values WMV; expression E1, E2; @@ ( - WMV.cursor[E1][E2] + WMV.plane[E1][PLANE_CURSOR][E2] | - WMV.cursor_trans[E1] + WMV.plane_trans[E1][PLANE_CURSOR] ) @@ struct skl_wm_values *WMV; expression E1, E2; @@ ( - WMV->cursor[E1][E2] + WMV->plane[E1][PLANE_CURSOR][E2] | - WMV->cursor_trans[E1] + WMV->plane_trans[E1][PLANE_CURSOR] ) @@ @@ struct skl_wm_values { ... - uint32_t cursor[I915_MAX_PIPES][8]; ... - uint32_t cursor_trans[I915_MAX_PIPES]; ... }; @@ struct skl_wm_level WML; @@ ( - WML.cursor_en + WML.plane_en[PLANE_CURSOR] | - WML.cursor_res_b + WML.plane_res_b[PLANE_CURSOR] | - WML.cursor_res_l + WML.plane_res_l[PLANE_CURSOR] ) @@ struct skl_wm_level *WML; @@ ( - WML->cursor_en + WML->plane_en[PLANE_CURSOR] | - WML->cursor_res_b + WML->plane_res_b[PLANE_CURSOR] | - WML->cursor_res_l + WML->plane_res_l[PLANE_CURSOR] ) @@ @@ struct skl_wm_level { ... - bool cursor_en; ... - uint16_t cursor_res_b; - uint8_t cursor_res_l; ... }; v2: Use a PLANE_CURSOR enum entry rather than making the code reference I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25 05:53:10 +07:00
temp = hw->plane_trans[pipe][PLANE_CURSOR];
skl_pipe_wm_active_state(temp, active, true, true, i, 0);
intel_crtc->wm.active.skl = *active;
}
void skl_wm_get_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct skl_ddb_allocation *ddb = &dev_priv->wm.skl_hw.ddb;
struct drm_crtc *crtc;
skl_ddb_get_hw_state(dev_priv, ddb);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
skl_pipe_wm_get_hw_state(crtc);
}
static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct ilk_wm_values *hw = &dev_priv->wm.hw;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct intel_pipe_wm *active = &cstate->wm.optimal.ilk;
enum pipe pipe = intel_crtc->pipe;
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
static const i915_reg_t wm0_pipe_reg[] = {
[PIPE_A] = WM0_PIPEA_ILK,
[PIPE_B] = WM0_PIPEB_ILK,
[PIPE_C] = WM0_PIPEC_IVB,
};
hw->wm_pipe[pipe] = I915_READ(wm0_pipe_reg[pipe]);
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
drm/i915: Use crtc->state->active in ilk/skl watermark calculations (v3) Existing watermark code calls intel_crtc_active() to determine whether a CRTC is active for the purpose of watermark calculations (and bails out early if it determines the CRTC is not active). However intel_crtc_active() only returns true if crtc->primary->fb is non-NULL, which isn't appropriate in the modern age of universal planes and atomic modeset since userspace can now disable the primary plane, but leave the CRTC (and other planes) running. Note that commit commit 0fda65680e92545caea5be7805a7f0a617fb6c20 Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Fri Feb 27 15:12:35 2015 +0000 drm/i915/skl: Update watermarks for Y tiling adds a test for primary plane enable/disable to trigger a watermark update (previously we ignored updates to primary planes, which wasn't really correct, but we got lucky since we always pretended the primary plane was on). Tvrtko's patch tries to update watermarks when we re-enable the primary plane, but that watermark computation gets aborted early because intel_crtc_active() returns false due to the disabled primary plane. Switch the ILK and SKL watermark code over to use crtc->state->active rather than calling intel_crtc_active() so that we'll properly compute watermarks when re-enabling the primary plane. Note that this commit doesn't touch callsites in the watermark code for older platforms since there were concerns that doing so would lead to other types of breakage. Also note that all of the watermark calculation at the moment takes place after new crtc/plane states are swapped into the DRM objects. This will change in the future, so we'll be working with in-flight state objects, but for the time being, crtc->state is what we want to operate on. v2: Don't drop primary->fb check from intel_crtc_active(), but rather replace ILK/SKL callsites with direct tests of crtc->state->active. There is concern that messing with intel_crtc_active() will lead to other breakage for old hardware platforms. (Ville) v3: Use intel_crtc->active for now rather than crtc->state->active since we don't have CRTC states properly hooked up and initialized yet. We'll defer the switch to crtc->state->active until the atomic CRTC state work is farther along. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 00:19:24 +07:00
active->pipe_enabled = intel_crtc->active;
if (active->pipe_enabled) {
u32 tmp = hw->wm_pipe[pipe];
/*
* For active pipes LP0 watermark is marked as
* enabled, and LP1+ watermaks as disabled since
* we can't really reverse compute them in case
* multiple pipes are active.
*/
active->wm[0].enable = true;
active->wm[0].pri_val = (tmp & WM0_PIPE_PLANE_MASK) >> WM0_PIPE_PLANE_SHIFT;
active->wm[0].spr_val = (tmp & WM0_PIPE_SPRITE_MASK) >> WM0_PIPE_SPRITE_SHIFT;
active->wm[0].cur_val = tmp & WM0_PIPE_CURSOR_MASK;
active->linetime = hw->wm_linetime[pipe];
} else {
int level, max_level = ilk_wm_max_level(dev);
/*
* For inactive pipes, all watermark levels
* should be marked as enabled but zeroed,
* which is what we'd compute them to.
*/
for (level = 0; level <= max_level; level++)
active->wm[level].enable = true;
}
intel_crtc->wm.active.ilk = *active;
}
#define _FW_WM(value, plane) \
(((value) & DSPFW_ ## plane ## _MASK) >> DSPFW_ ## plane ## _SHIFT)
#define _FW_WM_VLV(value, plane) \
(((value) & DSPFW_ ## plane ## _MASK_VLV) >> DSPFW_ ## plane ## _SHIFT)
static void vlv_read_wm_values(struct drm_i915_private *dev_priv,
struct vlv_wm_values *wm)
{
enum pipe pipe;
uint32_t tmp;
for_each_pipe(dev_priv, pipe) {
tmp = I915_READ(VLV_DDL(pipe));
wm->ddl[pipe].primary =
(tmp >> DDL_PLANE_SHIFT) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
wm->ddl[pipe].cursor =
(tmp >> DDL_CURSOR_SHIFT) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
wm->ddl[pipe].sprite[0] =
(tmp >> DDL_SPRITE_SHIFT(0)) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
wm->ddl[pipe].sprite[1] =
(tmp >> DDL_SPRITE_SHIFT(1)) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
}
tmp = I915_READ(DSPFW1);
wm->sr.plane = _FW_WM(tmp, SR);
wm->pipe[PIPE_B].cursor = _FW_WM(tmp, CURSORB);
wm->pipe[PIPE_B].primary = _FW_WM_VLV(tmp, PLANEB);
wm->pipe[PIPE_A].primary = _FW_WM_VLV(tmp, PLANEA);
tmp = I915_READ(DSPFW2);
wm->pipe[PIPE_A].sprite[1] = _FW_WM_VLV(tmp, SPRITEB);
wm->pipe[PIPE_A].cursor = _FW_WM(tmp, CURSORA);
wm->pipe[PIPE_A].sprite[0] = _FW_WM_VLV(tmp, SPRITEA);
tmp = I915_READ(DSPFW3);
wm->sr.cursor = _FW_WM(tmp, CURSOR_SR);
if (IS_CHERRYVIEW(dev_priv)) {
tmp = I915_READ(DSPFW7_CHV);
wm->pipe[PIPE_B].sprite[1] = _FW_WM_VLV(tmp, SPRITED);
wm->pipe[PIPE_B].sprite[0] = _FW_WM_VLV(tmp, SPRITEC);
tmp = I915_READ(DSPFW8_CHV);
wm->pipe[PIPE_C].sprite[1] = _FW_WM_VLV(tmp, SPRITEF);
wm->pipe[PIPE_C].sprite[0] = _FW_WM_VLV(tmp, SPRITEE);
tmp = I915_READ(DSPFW9_CHV);
wm->pipe[PIPE_C].primary = _FW_WM_VLV(tmp, PLANEC);
wm->pipe[PIPE_C].cursor = _FW_WM(tmp, CURSORC);
tmp = I915_READ(DSPHOWM);
wm->sr.plane |= _FW_WM(tmp, SR_HI) << 9;
wm->pipe[PIPE_C].sprite[1] |= _FW_WM(tmp, SPRITEF_HI) << 8;
wm->pipe[PIPE_C].sprite[0] |= _FW_WM(tmp, SPRITEE_HI) << 8;
wm->pipe[PIPE_C].primary |= _FW_WM(tmp, PLANEC_HI) << 8;
wm->pipe[PIPE_B].sprite[1] |= _FW_WM(tmp, SPRITED_HI) << 8;
wm->pipe[PIPE_B].sprite[0] |= _FW_WM(tmp, SPRITEC_HI) << 8;
wm->pipe[PIPE_B].primary |= _FW_WM(tmp, PLANEB_HI) << 8;
wm->pipe[PIPE_A].sprite[1] |= _FW_WM(tmp, SPRITEB_HI) << 8;
wm->pipe[PIPE_A].sprite[0] |= _FW_WM(tmp, SPRITEA_HI) << 8;
wm->pipe[PIPE_A].primary |= _FW_WM(tmp, PLANEA_HI) << 8;
} else {
tmp = I915_READ(DSPFW7);
wm->pipe[PIPE_B].sprite[1] = _FW_WM_VLV(tmp, SPRITED);
wm->pipe[PIPE_B].sprite[0] = _FW_WM_VLV(tmp, SPRITEC);
tmp = I915_READ(DSPHOWM);
wm->sr.plane |= _FW_WM(tmp, SR_HI) << 9;
wm->pipe[PIPE_B].sprite[1] |= _FW_WM(tmp, SPRITED_HI) << 8;
wm->pipe[PIPE_B].sprite[0] |= _FW_WM(tmp, SPRITEC_HI) << 8;
wm->pipe[PIPE_B].primary |= _FW_WM(tmp, PLANEB_HI) << 8;
wm->pipe[PIPE_A].sprite[1] |= _FW_WM(tmp, SPRITEB_HI) << 8;
wm->pipe[PIPE_A].sprite[0] |= _FW_WM(tmp, SPRITEA_HI) << 8;
wm->pipe[PIPE_A].primary |= _FW_WM(tmp, PLANEA_HI) << 8;
}
}
#undef _FW_WM
#undef _FW_WM_VLV
void vlv_wm_get_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct vlv_wm_values *wm = &dev_priv->wm.vlv;
struct intel_plane *plane;
enum pipe pipe;
u32 val;
vlv_read_wm_values(dev_priv, wm);
for_each_intel_plane(dev, plane) {
switch (plane->base.type) {
int sprite;
case DRM_PLANE_TYPE_CURSOR:
plane->wm.fifo_size = 63;
break;
case DRM_PLANE_TYPE_PRIMARY:
plane->wm.fifo_size = vlv_get_fifo_size(dev, plane->pipe, 0);
break;
case DRM_PLANE_TYPE_OVERLAY:
sprite = plane->plane;
plane->wm.fifo_size = vlv_get_fifo_size(dev, plane->pipe, sprite + 1);
break;
}
}
wm->cxsr = I915_READ(FW_BLC_SELF_VLV) & FW_CSPWRDWNEN;
wm->level = VLV_WM_LEVEL_PM2;
if (IS_CHERRYVIEW(dev_priv)) {
mutex_lock(&dev_priv->rps.hw_lock);
val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
if (val & DSP_MAXFIFO_PM5_ENABLE)
wm->level = VLV_WM_LEVEL_PM5;
/*
* If DDR DVFS is disabled in the BIOS, Punit
* will never ack the request. So if that happens
* assume we don't have to enable/disable DDR DVFS
* dynamically. To test that just set the REQ_ACK
* bit to poke the Punit, but don't change the
* HIGH/LOW bits so that we don't actually change
* the current state.
*/
val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
val |= FORCE_DDR_FREQ_REQ_ACK;
vlv_punit_write(dev_priv, PUNIT_REG_DDR_SETUP2, val);
if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2) &
FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) {
DRM_DEBUG_KMS("Punit not acking DDR DVFS request, "
"assuming DDR DVFS is disabled\n");
dev_priv->wm.max_level = VLV_WM_LEVEL_PM5;
} else {
val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
if ((val & FORCE_DDR_HIGH_FREQ) == 0)
wm->level = VLV_WM_LEVEL_DDR_DVFS;
}
mutex_unlock(&dev_priv->rps.hw_lock);
}
for_each_pipe(dev_priv, pipe)
DRM_DEBUG_KMS("Initial watermarks: pipe %c, plane=%d, cursor=%d, sprite0=%d, sprite1=%d\n",
pipe_name(pipe), wm->pipe[pipe].primary, wm->pipe[pipe].cursor,
wm->pipe[pipe].sprite[0], wm->pipe[pipe].sprite[1]);
DRM_DEBUG_KMS("Initial watermarks: SR plane=%d, SR cursor=%d level=%d cxsr=%d\n",
wm->sr.plane, wm->sr.cursor, wm->level, wm->cxsr);
}
void ilk_wm_get_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct ilk_wm_values *hw = &dev_priv->wm.hw;
struct drm_crtc *crtc;
for_each_crtc(dev, crtc)
ilk_pipe_wm_get_hw_state(crtc);
hw->wm_lp[0] = I915_READ(WM1_LP_ILK);
hw->wm_lp[1] = I915_READ(WM2_LP_ILK);
hw->wm_lp[2] = I915_READ(WM3_LP_ILK);
hw->wm_lp_spr[0] = I915_READ(WM1S_LP_ILK);
if (INTEL_INFO(dev)->gen >= 7) {
hw->wm_lp_spr[1] = I915_READ(WM2S_LP_IVB);
hw->wm_lp_spr[2] = I915_READ(WM3S_LP_IVB);
}
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
hw->partitioning = (I915_READ(WM_MISC) & WM_MISC_DATA_PARTITION_5_6) ?
INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2;
else if (IS_IVYBRIDGE(dev))
hw->partitioning = (I915_READ(DISP_ARB_CTL2) & DISP_DATA_PARTITION_5_6) ?
INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2;
hw->enable_fbc_wm =
!(I915_READ(DISP_ARB_CTL) & DISP_FBC_WM_DIS);
}
/**
* intel_update_watermarks - update FIFO watermark values based on current modes
*
* Calculate watermark values for the various WM regs based on current mode
* and plane configuration.
*
* There are several cases to deal with here:
* - normal (i.e. non-self-refresh)
* - self-refresh (SR) mode
* - lines are large relative to FIFO size (buffer can hold up to 2)
* - lines are small relative to FIFO size (buffer can hold more than 2
* lines), so need to account for TLB latency
*
* The normal calculation is:
* watermark = dotclock * bytes per pixel * latency
* where latency is platform & configuration dependent (we assume pessimal
* values here).
*
* The SR calculation is:
* watermark = (trunc(latency/line time)+1) * surface width *
* bytes per pixel
* where
* line time = htotal / dotclock
* surface width = hdisplay for normal plane and 64 for cursor
* and latency is assumed to be high, as above.
*
* The final value programmed to the register should always be rounded up,
* and include an extra 2 entries to account for clock crossings.
*
* We don't use the sprite, so we can ignore that. And on Crestline we have
* to set the non-SR watermarks to 8.
*/
void intel_update_watermarks(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
if (dev_priv->display.update_wm)
dev_priv->display.update_wm(crtc);
}
/*
* Lock protecting IPS related data structures
*/
DEFINE_SPINLOCK(mchdev_lock);
/* Global for IPS driver to get at the current i915 device. Protected by
* mchdev_lock. */
static struct drm_i915_private *i915_mch_dev;
bool ironlake_set_drps(struct drm_device *dev, u8 val)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u16 rgvswctl;
assert_spin_locked(&mchdev_lock);
rgvswctl = I915_READ16(MEMSWCTL);
if (rgvswctl & MEMCTL_CMD_STS) {
DRM_DEBUG("gpu busy, RCS change rejected\n");
return false; /* still busy with another command */
}
rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
(val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
I915_WRITE16(MEMSWCTL, rgvswctl);
POSTING_READ16(MEMSWCTL);
rgvswctl |= MEMCTL_CMD_STS;
I915_WRITE16(MEMSWCTL, rgvswctl);
return true;
}
static void ironlake_enable_drps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 rgvmodectl = I915_READ(MEMMODECTL);
u8 fmax, fmin, fstart, vstart;
spin_lock_irq(&mchdev_lock);
/* Enable temp reporting */
I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
/* 100ms RC evaluation intervals */
I915_WRITE(RCUPEI, 100000);
I915_WRITE(RCDNEI, 100000);
/* Set max/min thresholds to 90ms and 80ms respectively */
I915_WRITE(RCBMAXAVG, 90000);
I915_WRITE(RCBMINAVG, 80000);
I915_WRITE(MEMIHYST, 1);
/* Set up min, max, and cur for interrupt handling */
fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
MEMMODE_FSTART_SHIFT;
vstart = (I915_READ(PXVFREQ(fstart)) & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
dev_priv->ips.fmax = fmax; /* IPS callback will increase this */
dev_priv->ips.fstart = fstart;
dev_priv->ips.max_delay = fstart;
dev_priv->ips.min_delay = fmin;
dev_priv->ips.cur_delay = fstart;
DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
fmax, fmin, fstart);
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
/*
* Interrupts will be enabled in ironlake_irq_postinstall
*/
I915_WRITE(VIDSTART, vstart);
POSTING_READ(VIDSTART);
rgvmodectl |= MEMMODE_SWMODE_EN;
I915_WRITE(MEMMODECTL, rgvmodectl);
if (wait_for_atomic((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
DRM_ERROR("stuck trying to change perf mode\n");
mdelay(1);
ironlake_set_drps(dev, fstart);
dev_priv->ips.last_count1 = I915_READ(DMIEC) +
I915_READ(DDREC) + I915_READ(CSIEC);
dev_priv->ips.last_time1 = jiffies_to_msecs(jiffies);
dev_priv->ips.last_count2 = I915_READ(GFXEC);
dev_priv->ips.last_time2 = ktime_get_raw_ns();
spin_unlock_irq(&mchdev_lock);
}
static void ironlake_disable_drps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u16 rgvswctl;
spin_lock_irq(&mchdev_lock);
rgvswctl = I915_READ16(MEMSWCTL);
/* Ack interrupts, disable EFC interrupt */
I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
I915_WRITE(DEIIR, DE_PCU_EVENT);
I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
/* Go back to the starting frequency */
ironlake_set_drps(dev, dev_priv->ips.fstart);
mdelay(1);
rgvswctl |= MEMCTL_CMD_STS;
I915_WRITE(MEMSWCTL, rgvswctl);
mdelay(1);
spin_unlock_irq(&mchdev_lock);
}
/* There's a funny hw issue where the hw returns all 0 when reading from
* GEN6_RP_INTERRUPT_LIMITS. Hence we always need to compute the desired value
* ourselves, instead of doing a rmw cycle (which might result in us clearing
* all limits and the gpu stuck at whatever frequency it is at atm).
*/
static u32 intel_rps_limits(struct drm_i915_private *dev_priv, u8 val)
{
u32 limits;
/* Only set the down limit when we've reached the lowest level to avoid
* getting more interrupts, otherwise leave this clear. This prevents a
* race in the hw when coming out of rc6: There's a tiny window where
* the hw runs at the minimal clock before selecting the desired
* frequency, if the down threshold expires in that window we will not
* receive a down interrupt. */
if (IS_GEN9(dev_priv->dev)) {
limits = (dev_priv->rps.max_freq_softlimit) << 23;
if (val <= dev_priv->rps.min_freq_softlimit)
limits |= (dev_priv->rps.min_freq_softlimit) << 14;
} else {
limits = dev_priv->rps.max_freq_softlimit << 24;
if (val <= dev_priv->rps.min_freq_softlimit)
limits |= dev_priv->rps.min_freq_softlimit << 16;
}
return limits;
}
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
{
int new_power;
u32 threshold_up = 0, threshold_down = 0; /* in % */
u32 ei_up = 0, ei_down = 0;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
new_power = dev_priv->rps.power;
switch (dev_priv->rps.power) {
case LOW_POWER:
if (val > dev_priv->rps.efficient_freq + 1 && val > dev_priv->rps.cur_freq)
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
new_power = BETWEEN;
break;
case BETWEEN:
if (val <= dev_priv->rps.efficient_freq && val < dev_priv->rps.cur_freq)
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
new_power = LOW_POWER;
else if (val >= dev_priv->rps.rp0_freq && val > dev_priv->rps.cur_freq)
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
new_power = HIGH_POWER;
break;
case HIGH_POWER:
if (val < (dev_priv->rps.rp1_freq + dev_priv->rps.rp0_freq) >> 1 && val < dev_priv->rps.cur_freq)
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
new_power = BETWEEN;
break;
}
/* Max/min bins are special */
if (val <= dev_priv->rps.min_freq_softlimit)
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
new_power = LOW_POWER;
if (val >= dev_priv->rps.max_freq_softlimit)
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
new_power = HIGH_POWER;
if (new_power == dev_priv->rps.power)
return;
/* Note the units here are not exactly 1us, but 1280ns. */
switch (new_power) {
case LOW_POWER:
/* Upclock if more than 95% busy over 16ms */
ei_up = 16000;
threshold_up = 95;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
/* Downclock if less than 85% busy over 32ms */
ei_down = 32000;
threshold_down = 85;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
break;
case BETWEEN:
/* Upclock if more than 90% busy over 13ms */
ei_up = 13000;
threshold_up = 90;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
/* Downclock if less than 75% busy over 32ms */
ei_down = 32000;
threshold_down = 75;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
break;
case HIGH_POWER:
/* Upclock if more than 85% busy over 10ms */
ei_up = 10000;
threshold_up = 85;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
/* Downclock if less than 60% busy over 32ms */
ei_down = 32000;
threshold_down = 60;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
break;
}
I915_WRITE(GEN6_RP_UP_EI,
GT_INTERVAL_FROM_US(dev_priv, ei_up));
I915_WRITE(GEN6_RP_UP_THRESHOLD,
GT_INTERVAL_FROM_US(dev_priv, (ei_up * threshold_up / 100)));
I915_WRITE(GEN6_RP_DOWN_EI,
GT_INTERVAL_FROM_US(dev_priv, ei_down));
I915_WRITE(GEN6_RP_DOWN_THRESHOLD,
GT_INTERVAL_FROM_US(dev_priv, (ei_down * threshold_down / 100)));
I915_WRITE(GEN6_RP_CONTROL,
GEN6_RP_MEDIA_TURBO |
GEN6_RP_MEDIA_HW_NORMAL_MODE |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
dev_priv->rps.power = new_power;
dev_priv->rps.up_threshold = threshold_up;
dev_priv->rps.down_threshold = threshold_down;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
dev_priv->rps.last_adj = 0;
}
static u32 gen6_rps_pm_mask(struct drm_i915_private *dev_priv, u8 val)
{
u32 mask = 0;
if (val > dev_priv->rps.min_freq_softlimit)
mask |= GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT;
if (val < dev_priv->rps.max_freq_softlimit)
mask |= GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_UP_THRESHOLD;
mask &= dev_priv->pm_rps_events;
return gen6_sanitize_rps_pm_mask(dev_priv, ~mask);
}
/* gen6_set_rps is called to update the frequency request, but should also be
* called when the range (min_delay and max_delay) is modified so that we can
* update the GEN6_RP_INTERRUPT_LIMITS register accordingly. */
static void gen6_set_rps(struct drm_device *dev, u8 val)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* WaGsvDisableTurbo: Workaround to disable turbo on BXT A* */
if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
return;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
WARN_ON(val > dev_priv->rps.max_freq);
WARN_ON(val < dev_priv->rps.min_freq);
/* min/max delay may still have been modified so be sure to
* write the limits value.
*/
if (val != dev_priv->rps.cur_freq) {
gen6_set_rps_thresholds(dev_priv, val);
if (IS_GEN9(dev))
I915_WRITE(GEN6_RPNSWREQ,
GEN9_FREQUENCY(val));
else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
I915_WRITE(GEN6_RPNSWREQ,
HSW_FREQUENCY(val));
else
I915_WRITE(GEN6_RPNSWREQ,
GEN6_FREQUENCY(val) |
GEN6_OFFSET(0) |
GEN6_AGGRESSIVE_TURBO);
}
/* Make sure we continue to get interrupts
* until we hit the minimum or maximum frequencies.
*/
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, intel_rps_limits(dev_priv, val));
I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
POSTING_READ(GEN6_RPNSWREQ);
dev_priv->rps.cur_freq = val;
trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
}
static void valleyview_set_rps(struct drm_device *dev, u8 val)
{
struct drm_i915_private *dev_priv = dev->dev_private;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
WARN_ON(val > dev_priv->rps.max_freq);
WARN_ON(val < dev_priv->rps.min_freq);
if (WARN_ONCE(IS_CHERRYVIEW(dev) && (val & 1),
"Odd GPU freq value\n"))
val &= ~1;
I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
if (val != dev_priv->rps.cur_freq) {
vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val);
if (!IS_CHERRYVIEW(dev_priv))
gen6_set_rps_thresholds(dev_priv, val);
}
dev_priv->rps.cur_freq = val;
trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
}
/* vlv_set_rps_idle: Set the frequency to idle, if Gfx clocks are down
*
* * If Gfx is Idle, then
* 1. Forcewake Media well.
* 2. Request idle freq.
* 3. Release Forcewake of Media well.
*/
static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
{
u32 val = dev_priv->rps.idle_freq;
if (dev_priv->rps.cur_freq <= val)
return;
/* Wake up the media well, as that takes a lot less
* power than the Render well. */
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);
valleyview_set_rps(dev_priv->dev, val);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_MEDIA);
}
void gen6_rps_busy(struct drm_i915_private *dev_priv)
{
mutex_lock(&dev_priv->rps.hw_lock);
if (dev_priv->rps.enabled) {
if (dev_priv->pm_rps_events & (GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED))
gen6_rps_reset_ei(dev_priv);
I915_WRITE(GEN6_PMINTRMSK,
gen6_rps_pm_mask(dev_priv, dev_priv->rps.cur_freq));
}
mutex_unlock(&dev_priv->rps.hw_lock);
}
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:56 +07:00
void gen6_rps_idle(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:56 +07:00
mutex_lock(&dev_priv->rps.hw_lock);
if (dev_priv->rps.enabled) {
if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
vlv_set_rps_idle(dev_priv);
else
gen6_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
dev_priv->rps.last_adj = 0;
I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
}
mutex_unlock(&dev_priv->rps.hw_lock);
spin_lock(&dev_priv->rps.client_lock);
while (!list_empty(&dev_priv->rps.clients))
list_del_init(dev_priv->rps.clients.next);
spin_unlock(&dev_priv->rps.client_lock);
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:56 +07:00
}
void gen6_rps_boost(struct drm_i915_private *dev_priv,
struct intel_rps_client *rps,
unsigned long submitted)
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:56 +07:00
{
/* This is intentionally racy! We peek at the state here, then
* validate inside the RPS worker.
*/
if (!(dev_priv->mm.busy &&
dev_priv->rps.enabled &&
dev_priv->rps.cur_freq < dev_priv->rps.max_freq_softlimit))
return;
/* Force a RPS boost (and don't count it against the client) if
* the GPU is severely congested.
*/
if (rps && time_after(jiffies, submitted + DRM_I915_THROTTLE_JIFFIES))
rps = NULL;
spin_lock(&dev_priv->rps.client_lock);
if (rps == NULL || list_empty(&rps->link)) {
spin_lock_irq(&dev_priv->irq_lock);
if (dev_priv->rps.interrupts_enabled) {
dev_priv->rps.client_boost = true;
queue_work(dev_priv->wq, &dev_priv->rps.work);
}
spin_unlock_irq(&dev_priv->irq_lock);
if (rps != NULL) {
list_add(&rps->link, &dev_priv->rps.clients);
rps->boosts++;
} else
dev_priv->rps.boosts++;
}
spin_unlock(&dev_priv->rps.client_lock);
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:56 +07:00
}
void intel_set_rps(struct drm_device *dev, u8 val)
{
if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
valleyview_set_rps(dev, val);
else
gen6_set_rps(dev, val);
}
static void gen9_disable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(GEN6_RC_CONTROL, 0);
I915_WRITE(GEN9_PG_ENABLE, 0);
}
static void gen6_disable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(GEN6_RC_CONTROL, 0);
I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
}
static void cherryview_disable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(GEN6_RC_CONTROL, 0);
}
static void valleyview_disable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* we're doing forcewake before Disabling RC6,
* This what the BIOS expects when going into suspend */
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
I915_WRITE(GEN6_RC_CONTROL, 0);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void intel_print_rc6_info(struct drm_device *dev, u32 mode)
{
if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
if (mode & (GEN7_RC_CTL_TO_MODE | GEN6_RC_CTL_EI_MODE(1)))
mode = GEN6_RC_CTL_RC6_ENABLE;
else
mode = 0;
}
if (HAS_RC6p(dev))
DRM_DEBUG_KMS("Enabling RC6 states: RC6 %s RC6p %s RC6pp %s\n",
onoff(mode & GEN6_RC_CTL_RC6_ENABLE),
onoff(mode & GEN6_RC_CTL_RC6p_ENABLE),
onoff(mode & GEN6_RC_CTL_RC6pp_ENABLE));
else
DRM_DEBUG_KMS("Enabling RC6 states: RC6 %s\n",
onoff(mode & GEN6_RC_CTL_RC6_ENABLE));
}
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-06 01:43:29 +07:00
static bool bxt_check_bios_rc6_setup(const struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
bool enable_rc6 = true;
unsigned long rc6_ctx_base;
if (!(I915_READ(RC6_LOCATION) & RC6_CTX_IN_DRAM)) {
DRM_DEBUG_KMS("RC6 Base location not set properly.\n");
enable_rc6 = false;
}
/*
* The exact context size is not known for BXT, so assume a page size
* for this check.
*/
rc6_ctx_base = I915_READ(RC6_CTX_BASE) & RC6_CTX_BASE_MASK;
if (!((rc6_ctx_base >= dev_priv->gtt.stolen_reserved_base) &&
(rc6_ctx_base + PAGE_SIZE <= dev_priv->gtt.stolen_reserved_base +
dev_priv->gtt.stolen_reserved_size))) {
DRM_DEBUG_KMS("RC6 Base address not as expected.\n");
enable_rc6 = false;
}
if (!(((I915_READ(PWRCTX_MAXCNT_RCSUNIT) & IDLE_TIME_MASK) > 1) &&
((I915_READ(PWRCTX_MAXCNT_VCSUNIT0) & IDLE_TIME_MASK) > 1) &&
((I915_READ(PWRCTX_MAXCNT_BCSUNIT) & IDLE_TIME_MASK) > 1) &&
((I915_READ(PWRCTX_MAXCNT_VECSUNIT) & IDLE_TIME_MASK) > 1))) {
DRM_DEBUG_KMS("Engine Idle wait time not set properly.\n");
enable_rc6 = false;
}
if (!(I915_READ(GEN6_RC_CONTROL) & (GEN6_RC_CTL_RC6_ENABLE |
GEN6_RC_CTL_HW_ENABLE)) &&
((I915_READ(GEN6_RC_CONTROL) & GEN6_RC_CTL_HW_ENABLE) ||
!(I915_READ(GEN6_RC_STATE) & RC6_STATE))) {
DRM_DEBUG_KMS("HW/SW RC6 is not enabled by BIOS.\n");
enable_rc6 = false;
}
return enable_rc6;
}
int sanitize_rc6_option(const struct drm_device *dev, int enable_rc6)
{
/* No RC6 before Ironlake and code is gone for ilk. */
if (INTEL_INFO(dev)->gen < 6)
return 0;
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-06 01:43:29 +07:00
if (!enable_rc6)
return 0;
if (IS_BROXTON(dev) && !bxt_check_bios_rc6_setup(dev)) {
DRM_INFO("RC6 disabled by BIOS\n");
return 0;
}
/* Respect the kernel parameter if it is set */
if (enable_rc6 >= 0) {
int mask;
if (HAS_RC6p(dev))
mask = INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE |
INTEL_RC6pp_ENABLE;
else
mask = INTEL_RC6_ENABLE;
if ((enable_rc6 & mask) != enable_rc6)
DRM_DEBUG_KMS("Adjusting RC6 mask to %d (requested %d, valid %d)\n",
enable_rc6 & mask, enable_rc6, mask);
return enable_rc6 & mask;
}
if (IS_IVYBRIDGE(dev))
return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE);
return INTEL_RC6_ENABLE;
}
int intel_enable_rc6(const struct drm_device *dev)
{
return i915.enable_rc6;
}
static void gen6_init_rps_frequencies(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t rp_state_cap;
u32 ddcc_status = 0;
int ret;
/* All of these values are in units of 50MHz */
dev_priv->rps.cur_freq = 0;
/* static values from HW: RP0 > RP1 > RPn (min_freq) */
if (IS_BROXTON(dev)) {
rp_state_cap = I915_READ(BXT_RP_STATE_CAP);
dev_priv->rps.rp0_freq = (rp_state_cap >> 16) & 0xff;
dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff;
dev_priv->rps.min_freq = (rp_state_cap >> 0) & 0xff;
} else {
rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff;
dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff;
dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff;
}
/* hw_max = RP0 until we check for overclocking */
dev_priv->rps.max_freq = dev_priv->rps.rp0_freq;
dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq;
if (IS_HASWELL(dev) || IS_BROADWELL(dev) ||
IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
ret = sandybridge_pcode_read(dev_priv,
HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
&ddcc_status);
if (0 == ret)
dev_priv->rps.efficient_freq =
clamp_t(u8,
((ddcc_status >> 8) & 0xff),
dev_priv->rps.min_freq,
dev_priv->rps.max_freq);
}
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
/* Store the frequency values in 16.66 MHZ units, which is
the natural hardware unit for SKL */
dev_priv->rps.rp0_freq *= GEN9_FREQ_SCALER;
dev_priv->rps.rp1_freq *= GEN9_FREQ_SCALER;
dev_priv->rps.min_freq *= GEN9_FREQ_SCALER;
dev_priv->rps.max_freq *= GEN9_FREQ_SCALER;
dev_priv->rps.efficient_freq *= GEN9_FREQ_SCALER;
}
dev_priv->rps.idle_freq = dev_priv->rps.min_freq;
/* Preserve min/max settings in case of re-init */
if (dev_priv->rps.max_freq_softlimit == 0)
dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq;
if (dev_priv->rps.min_freq_softlimit == 0) {
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
dev_priv->rps.min_freq_softlimit =
max_t(int, dev_priv->rps.efficient_freq,
intel_freq_opcode(dev_priv, 450));
else
dev_priv->rps.min_freq_softlimit =
dev_priv->rps.min_freq;
}
}
/* See the Gen9_GT_PM_Programming_Guide doc for the below */
static void gen9_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
gen6_init_rps_frequencies(dev);
/* WaGsvDisableTurbo: Workaround to disable turbo on BXT A* */
if (IS_BXT_REVID(dev, 0, BXT_REVID_A1)) {
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
return;
}
/* Program defaults and thresholds for RPS*/
I915_WRITE(GEN6_RC_VIDEO_FREQ,
GEN9_FREQUENCY(dev_priv->rps.rp1_freq));
/* 1 second timeout*/
I915_WRITE(GEN6_RP_DOWN_TIMEOUT,
GT_INTERVAL_FROM_US(dev_priv, 1000000));
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 0xa);
/* Leaning on the below call to gen6_set_rps to program/setup the
* Up/Down EI & threshold registers, as well as the RP_CONTROL,
* RP_INTERRUPT_LIMITS & RPNSWREQ registers */
dev_priv->rps.power = HIGH_POWER; /* force a reset */
gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen9_enable_rc6(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring;
uint32_t rc6_mask = 0;
int unused;
/* 1a: Software RC state - RC0 */
I915_WRITE(GEN6_RC_STATE, 0);
/* 1b: Get forcewake during program sequence. Although the driver
* hasn't enabled a state yet where we need forcewake, BIOS may have.*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* 2a: Disable RC states. */
I915_WRITE(GEN6_RC_CONTROL, 0);
/* 2b: Program RC6 thresholds.*/
/* WaRsDoubleRc6WrlWithCoarsePowerGating: Doubling WRL only when CPG is enabled */
if (IS_SKYLAKE(dev))
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 108 << 16);
else
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
for_each_ring(ring, dev_priv, unused)
I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
if (HAS_GUC_UCODE(dev))
I915_WRITE(GUC_MAX_IDLE_COUNT, 0xA);
I915_WRITE(GEN6_RC_SLEEP, 0);
/* 2c: Program Coarse Power Gating Policies. */
I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 25);
I915_WRITE(GEN9_RENDER_PG_IDLE_HYSTERESIS, 25);
/* 3a: Enable RC6 */
if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE)
rc6_mask = GEN6_RC_CTL_RC6_ENABLE;
DRM_INFO("RC6 %s\n", onoff(rc6_mask & GEN6_RC_CTL_RC6_ENABLE));
/* WaRsUseTimeoutMode */
if (IS_SKL_REVID(dev, 0, SKL_REVID_D0) ||
IS_BXT_REVID(dev, 0, BXT_REVID_A1)) {
I915_WRITE(GEN6_RC6_THRESHOLD, 625); /* 800us */
I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE |
GEN7_RC_CTL_TO_MODE |
rc6_mask);
} else {
I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */
I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE |
GEN6_RC_CTL_EI_MODE(1) |
rc6_mask);
}
/*
* 3b: Enable Coarse Power Gating only when RC6 is enabled.
* WaRsDisableCoarsePowerGating:skl,bxt - Render/Media PG need to be disabled with RC6.
*/
if (NEEDS_WaRsDisableCoarsePowerGating(dev))
I915_WRITE(GEN9_PG_ENABLE, 0);
else
I915_WRITE(GEN9_PG_ENABLE, (rc6_mask & GEN6_RC_CTL_RC6_ENABLE) ?
(GEN9_RENDER_PG_ENABLE | GEN9_MEDIA_PG_ENABLE) : 0);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen8_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring;
uint32_t rc6_mask = 0;
int unused;
/* 1a: Software RC state - RC0 */
I915_WRITE(GEN6_RC_STATE, 0);
/* 1c & 1d: Get forcewake during program sequence. Although the driver
* hasn't enabled a state yet where we need forcewake, BIOS may have.*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* 2a: Disable RC states. */
I915_WRITE(GEN6_RC_CONTROL, 0);
/* Initialize rps frequencies */
gen6_init_rps_frequencies(dev);
/* 2b: Program RC6 thresholds.*/
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
for_each_ring(ring, dev_priv, unused)
I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
I915_WRITE(GEN6_RC_SLEEP, 0);
if (IS_BROADWELL(dev))
I915_WRITE(GEN6_RC6_THRESHOLD, 625); /* 800us/1.28 for TO */
else
I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */
/* 3: Enable RC6 */
if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE)
rc6_mask = GEN6_RC_CTL_RC6_ENABLE;
intel_print_rc6_info(dev, rc6_mask);
if (IS_BROADWELL(dev))
I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE |
GEN7_RC_CTL_TO_MODE |
rc6_mask);
else
I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE |
GEN6_RC_CTL_EI_MODE(1) |
rc6_mask);
/* 4 Program defaults and thresholds for RPS*/
I915_WRITE(GEN6_RPNSWREQ,
HSW_FREQUENCY(dev_priv->rps.rp1_freq));
I915_WRITE(GEN6_RC_VIDEO_FREQ,
HSW_FREQUENCY(dev_priv->rps.rp1_freq));
/* NB: Docs say 1s, and 1000000 - which aren't equivalent */
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 100000000 / 128); /* 1 second timeout */
/* Docs recommend 900MHz, and 300 MHz respectively */
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
dev_priv->rps.max_freq_softlimit << 24 |
dev_priv->rps.min_freq_softlimit << 16);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 7600000 / 128); /* 76ms busyness per EI, 90% */
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 31300000 / 128); /* 313ms busyness per EI, 70%*/
I915_WRITE(GEN6_RP_UP_EI, 66000); /* 84.48ms, XXX: random? */
I915_WRITE(GEN6_RP_DOWN_EI, 350000); /* 448ms, XXX: random? */
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
/* 5: Enable RPS */
I915_WRITE(GEN6_RP_CONTROL,
GEN6_RP_MEDIA_TURBO |
GEN6_RP_MEDIA_HW_NORMAL_MODE |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
/* 6: Ring frequency + overclocking (our driver does this later */
dev_priv->rps.power = HIGH_POWER; /* force a reset */
gen6_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen6_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring;
u32 rc6vids, pcu_mbox = 0, rc6_mask = 0;
u32 gtfifodbg;
int rc6_mode;
int i, ret;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
/* Here begins a magic sequence of register writes to enable
* auto-downclocking.
*
* Perhaps there might be some value in exposing these to
* userspace...
*/
I915_WRITE(GEN6_RC_STATE, 0);
/* Clear the DBG now so we don't confuse earlier errors */
if ((gtfifodbg = I915_READ(GTFIFODBG))) {
DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
I915_WRITE(GTFIFODBG, gtfifodbg);
}
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* Initialize rps frequencies */
gen6_init_rps_frequencies(dev);
/* disable the counters and set deterministic thresholds */
I915_WRITE(GEN6_RC_CONTROL, 0);
I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
for_each_ring(ring, dev_priv, i)
I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
I915_WRITE(GEN6_RC_SLEEP, 0);
I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
if (IS_IVYBRIDGE(dev))
I915_WRITE(GEN6_RC6_THRESHOLD, 125000);
else
I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
I915_WRITE(GEN6_RC6p_THRESHOLD, 150000);
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
/* Check if we are enabling RC6 */
rc6_mode = intel_enable_rc6(dev_priv->dev);
if (rc6_mode & INTEL_RC6_ENABLE)
rc6_mask |= GEN6_RC_CTL_RC6_ENABLE;
/* We don't use those on Haswell */
if (!IS_HASWELL(dev)) {
if (rc6_mode & INTEL_RC6p_ENABLE)
rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
if (rc6_mode & INTEL_RC6pp_ENABLE)
rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
}
intel_print_rc6_info(dev, rc6_mask);
I915_WRITE(GEN6_RC_CONTROL,
rc6_mask |
GEN6_RC_CTL_EI_MODE(1) |
GEN6_RC_CTL_HW_ENABLE);
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
/* Power down if completely idle for over 50ms */
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 50000);
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_MIN_FREQ_TABLE, 0);
if (ret)
DRM_DEBUG_DRIVER("Failed to set the min frequency\n");
ret = sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, &pcu_mbox);
if (!ret && (pcu_mbox & (1<<31))) { /* OC supported */
DRM_DEBUG_DRIVER("Overclocking supported. Max: %dMHz, Overclock max: %dMHz\n",
(dev_priv->rps.max_freq_softlimit & 0xff) * 50,
(pcu_mbox & 0xff) * 50);
dev_priv->rps.max_freq = pcu_mbox & 0xff;
}
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 23:34:57 +07:00
dev_priv->rps.power = HIGH_POWER; /* force a reset */
gen6_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
rc6vids = 0;
ret = sandybridge_pcode_read(dev_priv, GEN6_PCODE_READ_RC6VIDS, &rc6vids);
if (IS_GEN6(dev) && ret) {
DRM_DEBUG_DRIVER("Couldn't check for BIOS workaround\n");
} else if (IS_GEN6(dev) && (GEN6_DECODE_RC6_VID(rc6vids & 0xff) < 450)) {
DRM_DEBUG_DRIVER("You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n",
GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450);
rc6vids &= 0xffff00;
rc6vids |= GEN6_ENCODE_RC6_VID(450);
ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_RC6VIDS, rc6vids);
if (ret)
DRM_ERROR("Couldn't fix incorrect rc6 voltage\n");
}
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void __gen6_update_ring_freq(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int min_freq = 15;
unsigned int gpu_freq;
unsigned int max_ia_freq, min_ring_freq;
unsigned int max_gpu_freq, min_gpu_freq;
int scaling_factor = 180;
struct cpufreq_policy *policy;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
policy = cpufreq_cpu_get(0);
if (policy) {
max_ia_freq = policy->cpuinfo.max_freq;
cpufreq_cpu_put(policy);
} else {
/*
* Default to measured freq if none found, PCU will ensure we
* don't go over
*/
max_ia_freq = tsc_khz;
}
/* Convert from kHz to MHz */
max_ia_freq /= 1000;
min_ring_freq = I915_READ(DCLK) & 0xf;
/* convert DDR frequency from units of 266.6MHz to bandwidth */
min_ring_freq = mult_frac(min_ring_freq, 8, 3);
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
/* Convert GT frequency to 50 HZ units */
min_gpu_freq = dev_priv->rps.min_freq / GEN9_FREQ_SCALER;
max_gpu_freq = dev_priv->rps.max_freq / GEN9_FREQ_SCALER;
} else {
min_gpu_freq = dev_priv->rps.min_freq;
max_gpu_freq = dev_priv->rps.max_freq;
}
/*
* For each potential GPU frequency, load a ring frequency we'd like
* to use for memory access. We do this by specifying the IA frequency
* the PCU should use as a reference to determine the ring frequency.
*/
for (gpu_freq = max_gpu_freq; gpu_freq >= min_gpu_freq; gpu_freq--) {
int diff = max_gpu_freq - gpu_freq;
unsigned int ia_freq = 0, ring_freq = 0;
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
/*
* ring_freq = 2 * GT. ring_freq is in 100MHz units
* No floor required for ring frequency on SKL.
*/
ring_freq = gpu_freq;
} else if (INTEL_INFO(dev)->gen >= 8) {
/* max(2 * GT, DDR). NB: GT is 50MHz units */
ring_freq = max(min_ring_freq, gpu_freq);
} else if (IS_HASWELL(dev)) {
ring_freq = mult_frac(gpu_freq, 5, 4);
ring_freq = max(min_ring_freq, ring_freq);
/* leave ia_freq as the default, chosen by cpufreq */
} else {
/* On older processors, there is no separate ring
* clock domain, so in order to boost the bandwidth
* of the ring, we need to upclock the CPU (ia_freq).
*
* For GPU frequencies less than 750MHz,
* just use the lowest ring freq.
*/
if (gpu_freq < min_freq)
ia_freq = 800;
else
ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
}
sandybridge_pcode_write(dev_priv,
GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT |
ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT |
gpu_freq);
}
}
void gen6_update_ring_freq(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!HAS_CORE_RING_FREQ(dev))
return;
mutex_lock(&dev_priv->rps.hw_lock);
__gen6_update_ring_freq(dev);
mutex_unlock(&dev_priv->rps.hw_lock);
}
static int cherryview_rps_max_freq(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
u32 val, rp0;
val = vlv_punit_read(dev_priv, FB_GFX_FMAX_AT_VMAX_FUSE);
switch (INTEL_INFO(dev)->eu_total) {
case 8:
/* (2 * 4) config */
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS4EU_FUSE_SHIFT);
break;
case 12:
/* (2 * 6) config */
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS6EU_FUSE_SHIFT);
break;
case 16:
/* (2 * 8) config */
default:
/* Setting (2 * 8) Min RP0 for any other combination */
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS8EU_FUSE_SHIFT);
break;
}
rp0 = (rp0 & FB_GFX_FREQ_FUSE_MASK);
return rp0;
}
static int cherryview_rps_rpe_freq(struct drm_i915_private *dev_priv)
{
u32 val, rpe;
val = vlv_punit_read(dev_priv, PUNIT_GPU_DUTYCYCLE_REG);
rpe = (val >> PUNIT_GPU_DUTYCYCLE_RPE_FREQ_SHIFT) & PUNIT_GPU_DUTYCYCLE_RPE_FREQ_MASK;
return rpe;
}
static int cherryview_rps_guar_freq(struct drm_i915_private *dev_priv)
{
u32 val, rp1;
val = vlv_punit_read(dev_priv, FB_GFX_FMAX_AT_VMAX_FUSE);
rp1 = (val & FB_GFX_FREQ_FUSE_MASK);
return rp1;
}
static int valleyview_rps_guar_freq(struct drm_i915_private *dev_priv)
{
u32 val, rp1;
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE);
rp1 = (val & FB_GFX_FGUARANTEED_FREQ_FUSE_MASK) >> FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT;
return rp1;
}
static int valleyview_rps_max_freq(struct drm_i915_private *dev_priv)
{
u32 val, rp0;
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE);
rp0 = (val & FB_GFX_MAX_FREQ_FUSE_MASK) >> FB_GFX_MAX_FREQ_FUSE_SHIFT;
/* Clamp to max */
rp0 = min_t(u32, rp0, 0xea);
return rp0;
}
static int valleyview_rps_rpe_freq(struct drm_i915_private *dev_priv)
{
u32 val, rpe;
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_LO);
rpe = (val & FB_FMAX_VMIN_FREQ_LO_MASK) >> FB_FMAX_VMIN_FREQ_LO_SHIFT;
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_HI);
rpe |= (val & FB_FMAX_VMIN_FREQ_HI_MASK) << 5;
return rpe;
}
static int valleyview_rps_min_freq(struct drm_i915_private *dev_priv)
{
u32 val;
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_LFM) & 0xff;
/*
* According to the BYT Punit GPU turbo HAS 1.1.6.3 the minimum value
* for the minimum frequency in GPLL mode is 0xc1. Contrary to this on
* a BYT-M B0 the above register contains 0xbf. Moreover when setting
* a frequency Punit will not allow values below 0xc0. Clamp it 0xc0
* to make sure it matches what Punit accepts.
*/
return max_t(u32, val, 0xc0);
}
/* Check that the pctx buffer wasn't move under us. */
static void valleyview_check_pctx(struct drm_i915_private *dev_priv)
{
unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095;
WARN_ON(pctx_addr != dev_priv->mm.stolen_base +
dev_priv->vlv_pctx->stolen->start);
}
/* Check that the pcbr address is not empty. */
static void cherryview_check_pctx(struct drm_i915_private *dev_priv)
{
unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095;
WARN_ON((pctx_addr >> VLV_PCBR_ADDR_SHIFT) == 0);
}
static void cherryview_setup_pctx(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long pctx_paddr, paddr;
struct i915_gtt *gtt = &dev_priv->gtt;
u32 pcbr;
int pctx_size = 32*1024;
pcbr = I915_READ(VLV_PCBR);
if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
paddr = (dev_priv->mm.stolen_base +
(gtt->stolen_size - pctx_size));
pctx_paddr = (paddr & (~4095));
I915_WRITE(VLV_PCBR, pctx_paddr);
}
DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
}
static void valleyview_setup_pctx(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *pctx;
unsigned long pctx_paddr;
u32 pcbr;
int pctx_size = 24*1024;
mutex_lock(&dev->struct_mutex);
pcbr = I915_READ(VLV_PCBR);
if (pcbr) {
/* BIOS set it up already, grab the pre-alloc'd space */
int pcbr_offset;
pcbr_offset = (pcbr & (~4095)) - dev_priv->mm.stolen_base;
pctx = i915_gem_object_create_stolen_for_preallocated(dev_priv->dev,
pcbr_offset,
I915_GTT_OFFSET_NONE,
pctx_size);
goto out;
}
DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
/*
* From the Gunit register HAS:
* The Gfx driver is expected to program this register and ensure
* proper allocation within Gfx stolen memory. For example, this
* register should be programmed such than the PCBR range does not
* overlap with other ranges, such as the frame buffer, protected
* memory, or any other relevant ranges.
*/
pctx = i915_gem_object_create_stolen(dev, pctx_size);
if (!pctx) {
DRM_DEBUG("not enough stolen space for PCTX, disabling\n");
goto out;
}
pctx_paddr = dev_priv->mm.stolen_base + pctx->stolen->start;
I915_WRITE(VLV_PCBR, pctx_paddr);
out:
DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
dev_priv->vlv_pctx = pctx;
mutex_unlock(&dev->struct_mutex);
}
static void valleyview_cleanup_pctx(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (WARN_ON(!dev_priv->vlv_pctx))
return;
drm_gem_object_unreference_unlocked(&dev_priv->vlv_pctx->base);
dev_priv->vlv_pctx = NULL;
}
static void valleyview_init_gt_powersave(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 val;
valleyview_setup_pctx(dev);
mutex_lock(&dev_priv->rps.hw_lock);
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
switch ((val >> 6) & 3) {
case 0:
case 1:
dev_priv->mem_freq = 800;
break;
case 2:
dev_priv->mem_freq = 1066;
break;
case 3:
dev_priv->mem_freq = 1333;
break;
}
DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", dev_priv->mem_freq);
dev_priv->rps.max_freq = valleyview_rps_max_freq(dev_priv);
dev_priv->rps.rp0_freq = dev_priv->rps.max_freq;
DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.max_freq),
dev_priv->rps.max_freq);
dev_priv->rps.efficient_freq = valleyview_rps_rpe_freq(dev_priv);
DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
dev_priv->rps.efficient_freq);
dev_priv->rps.rp1_freq = valleyview_rps_guar_freq(dev_priv);
DRM_DEBUG_DRIVER("RP1(Guar Freq) GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.rp1_freq),
dev_priv->rps.rp1_freq);
dev_priv->rps.min_freq = valleyview_rps_min_freq(dev_priv);
DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.min_freq),
dev_priv->rps.min_freq);
dev_priv->rps.idle_freq = dev_priv->rps.min_freq;
/* Preserve min/max settings in case of re-init */
if (dev_priv->rps.max_freq_softlimit == 0)
dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq;
if (dev_priv->rps.min_freq_softlimit == 0)
dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq;
mutex_unlock(&dev_priv->rps.hw_lock);
}
static void cherryview_init_gt_powersave(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 val;
cherryview_setup_pctx(dev);
mutex_lock(&dev_priv->rps.hw_lock);
mutex_lock(&dev_priv->sb_lock);
val = vlv_cck_read(dev_priv, CCK_FUSE_REG);
mutex_unlock(&dev_priv->sb_lock);
switch ((val >> 2) & 0x7) {
case 3:
dev_priv->mem_freq = 2000;
break;
default:
dev_priv->mem_freq = 1600;
break;
}
DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", dev_priv->mem_freq);
dev_priv->rps.max_freq = cherryview_rps_max_freq(dev_priv);
dev_priv->rps.rp0_freq = dev_priv->rps.max_freq;
DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.max_freq),
dev_priv->rps.max_freq);
dev_priv->rps.efficient_freq = cherryview_rps_rpe_freq(dev_priv);
DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
dev_priv->rps.efficient_freq);
dev_priv->rps.rp1_freq = cherryview_rps_guar_freq(dev_priv);
DRM_DEBUG_DRIVER("RP1(Guar) GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.rp1_freq),
dev_priv->rps.rp1_freq);
/* PUnit validated range is only [RPe, RP0] */
dev_priv->rps.min_freq = dev_priv->rps.efficient_freq;
DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.min_freq),
dev_priv->rps.min_freq);
WARN_ONCE((dev_priv->rps.max_freq |
dev_priv->rps.efficient_freq |
dev_priv->rps.rp1_freq |
dev_priv->rps.min_freq) & 1,
"Odd GPU freq values\n");
dev_priv->rps.idle_freq = dev_priv->rps.min_freq;
/* Preserve min/max settings in case of re-init */
if (dev_priv->rps.max_freq_softlimit == 0)
dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq;
if (dev_priv->rps.min_freq_softlimit == 0)
dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq;
mutex_unlock(&dev_priv->rps.hw_lock);
}
static void valleyview_cleanup_gt_powersave(struct drm_device *dev)
{
valleyview_cleanup_pctx(dev);
}
static void cherryview_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring;
u32 gtfifodbg, val, rc6_mode = 0, pcbr;
int i;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
gtfifodbg = I915_READ(GTFIFODBG);
if (gtfifodbg) {
DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
gtfifodbg);
I915_WRITE(GTFIFODBG, gtfifodbg);
}
cherryview_check_pctx(dev_priv);
/* 1a & 1b: Get forcewake during program sequence. Although the driver
* hasn't enabled a state yet where we need forcewake, BIOS may have.*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* Disable RC states. */
I915_WRITE(GEN6_RC_CONTROL, 0);
/* 2a: Program RC6 thresholds.*/
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
for_each_ring(ring, dev_priv, i)
I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
I915_WRITE(GEN6_RC_SLEEP, 0);
/* TO threshold set to 500 us ( 0x186 * 1.28 us) */
I915_WRITE(GEN6_RC6_THRESHOLD, 0x186);
/* allows RC6 residency counter to work */
I915_WRITE(VLV_COUNTER_CONTROL,
_MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
VLV_MEDIA_RC6_COUNT_EN |
VLV_RENDER_RC6_COUNT_EN));
/* For now we assume BIOS is allocating and populating the PCBR */
pcbr = I915_READ(VLV_PCBR);
/* 3: Enable RC6 */
if ((intel_enable_rc6(dev) & INTEL_RC6_ENABLE) &&
(pcbr >> VLV_PCBR_ADDR_SHIFT))
rc6_mode = GEN7_RC_CTL_TO_MODE;
I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
/* 4 Program defaults and thresholds for RPS*/
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
I915_WRITE(GEN6_RP_UP_EI, 66000);
I915_WRITE(GEN6_RP_DOWN_EI, 350000);
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
/* 5: Enable RPS */
I915_WRITE(GEN6_RP_CONTROL,
GEN6_RP_MEDIA_HW_NORMAL_MODE |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
/* Setting Fixed Bias */
val = VLV_OVERRIDE_EN |
VLV_SOC_TDP_EN |
CHV_BIAS_CPU_50_SOC_50;
vlv_punit_write(dev_priv, VLV_TURBO_SOC_OVERRIDE, val);
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
/* RPS code assumes GPLL is used */
WARN_ONCE((val & GPLLENABLE) == 0, "GPLL not enabled\n");
DRM_DEBUG_DRIVER("GPLL enabled? %s\n", yesno(val & GPLLENABLE));
DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
dev_priv->rps.cur_freq = (val >> 8) & 0xff;
DRM_DEBUG_DRIVER("current GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.cur_freq),
dev_priv->rps.cur_freq);
DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
dev_priv->rps.efficient_freq);
valleyview_set_rps(dev_priv->dev, dev_priv->rps.efficient_freq);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void valleyview_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring;
u32 gtfifodbg, val, rc6_mode = 0;
int i;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
valleyview_check_pctx(dev_priv);
if ((gtfifodbg = I915_READ(GTFIFODBG))) {
DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
gtfifodbg);
I915_WRITE(GTFIFODBG, gtfifodbg);
}
/* If VLV, Forcewake all wells, else re-direct to regular path */
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* Disable RC states. */
I915_WRITE(GEN6_RC_CONTROL, 0);
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
I915_WRITE(GEN6_RP_UP_EI, 66000);
I915_WRITE(GEN6_RP_DOWN_EI, 350000);
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
I915_WRITE(GEN6_RP_CONTROL,
GEN6_RP_MEDIA_TURBO |
GEN6_RP_MEDIA_HW_NORMAL_MODE |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_CONT);
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 0x00280000);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
for_each_ring(ring, dev_priv, i)
I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
I915_WRITE(GEN6_RC6_THRESHOLD, 0x557);
/* allows RC6 residency counter to work */
I915_WRITE(VLV_COUNTER_CONTROL,
_MASKED_BIT_ENABLE(VLV_MEDIA_RC0_COUNT_EN |
VLV_RENDER_RC0_COUNT_EN |
VLV_MEDIA_RC6_COUNT_EN |
VLV_RENDER_RC6_COUNT_EN));
if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE)
rc6_mode = GEN7_RC_CTL_TO_MODE | VLV_RC_CTL_CTX_RST_PARALLEL;
intel_print_rc6_info(dev, rc6_mode);
I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
/* Setting Fixed Bias */
val = VLV_OVERRIDE_EN |
VLV_SOC_TDP_EN |
VLV_BIAS_CPU_125_SOC_875;
vlv_punit_write(dev_priv, VLV_TURBO_SOC_OVERRIDE, val);
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
/* RPS code assumes GPLL is used */
WARN_ONCE((val & GPLLENABLE) == 0, "GPLL not enabled\n");
DRM_DEBUG_DRIVER("GPLL enabled? %s\n", yesno(val & GPLLENABLE));
DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
dev_priv->rps.cur_freq = (val >> 8) & 0xff;
DRM_DEBUG_DRIVER("current GPU freq: %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.cur_freq),
dev_priv->rps.cur_freq);
DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n",
2015-01-24 02:04:26 +07:00
intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
dev_priv->rps.efficient_freq);
valleyview_set_rps(dev_priv->dev, dev_priv->rps.efficient_freq);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static unsigned long intel_pxfreq(u32 vidfreq)
{
unsigned long freq;
int div = (vidfreq & 0x3f0000) >> 16;
int post = (vidfreq & 0x3000) >> 12;
int pre = (vidfreq & 0x7);
if (!pre)
return 0;
freq = ((div * 133333) / ((1<<post) * pre));
return freq;
}
static const struct cparams {
u16 i;
u16 t;
u16 m;
u16 c;
} cparams[] = {
{ 1, 1333, 301, 28664 },
{ 1, 1066, 294, 24460 },
{ 1, 800, 294, 25192 },
{ 0, 1333, 276, 27605 },
{ 0, 1066, 276, 27605 },
{ 0, 800, 231, 23784 },
};
static unsigned long __i915_chipset_val(struct drm_i915_private *dev_priv)
{
u64 total_count, diff, ret;
u32 count1, count2, count3, m = 0, c = 0;
unsigned long now = jiffies_to_msecs(jiffies), diff1;
int i;
assert_spin_locked(&mchdev_lock);
diff1 = now - dev_priv->ips.last_time1;
/* Prevent division-by-zero if we are asking too fast.
* Also, we don't get interesting results if we are polling
* faster than once in 10ms, so just return the saved value
* in such cases.
*/
if (diff1 <= 10)
return dev_priv->ips.chipset_power;
count1 = I915_READ(DMIEC);
count2 = I915_READ(DDREC);
count3 = I915_READ(CSIEC);
total_count = count1 + count2 + count3;
/* FIXME: handle per-counter overflow */
if (total_count < dev_priv->ips.last_count1) {
diff = ~0UL - dev_priv->ips.last_count1;
diff += total_count;
} else {
diff = total_count - dev_priv->ips.last_count1;
}
for (i = 0; i < ARRAY_SIZE(cparams); i++) {
if (cparams[i].i == dev_priv->ips.c_m &&
cparams[i].t == dev_priv->ips.r_t) {
m = cparams[i].m;
c = cparams[i].c;
break;
}
}
diff = div_u64(diff, diff1);
ret = ((m * diff) + c);
ret = div_u64(ret, 10);
dev_priv->ips.last_count1 = total_count;
dev_priv->ips.last_time1 = now;
dev_priv->ips.chipset_power = ret;
return ret;
}
unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
unsigned long val;
if (INTEL_INFO(dev)->gen != 5)
return 0;
spin_lock_irq(&mchdev_lock);
val = __i915_chipset_val(dev_priv);
spin_unlock_irq(&mchdev_lock);
return val;
}
unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
{
unsigned long m, x, b;
u32 tsfs;
tsfs = I915_READ(TSFS);
m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT);
x = I915_READ8(TR1);
b = tsfs & TSFS_INTR_MASK;
return ((m * x) / 127) - b;
}
static int _pxvid_to_vd(u8 pxvid)
{
if (pxvid == 0)
return 0;
if (pxvid >= 8 && pxvid < 31)
pxvid = 31;
return (pxvid + 2) * 125;
}
static u32 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
{
struct drm_device *dev = dev_priv->dev;
const int vd = _pxvid_to_vd(pxvid);
const int vm = vd - 1125;
if (INTEL_INFO(dev)->is_mobile)
return vm > 0 ? vm : 0;
return vd;
}
static void __i915_update_gfx_val(struct drm_i915_private *dev_priv)
{
u64 now, diff, diffms;
u32 count;
assert_spin_locked(&mchdev_lock);
now = ktime_get_raw_ns();
diffms = now - dev_priv->ips.last_time2;
do_div(diffms, NSEC_PER_MSEC);
/* Don't divide by 0 */
if (!diffms)
return;
count = I915_READ(GFXEC);
if (count < dev_priv->ips.last_count2) {
diff = ~0UL - dev_priv->ips.last_count2;
diff += count;
} else {
diff = count - dev_priv->ips.last_count2;
}
dev_priv->ips.last_count2 = count;
dev_priv->ips.last_time2 = now;
/* More magic constants... */
diff = diff * 1181;
diff = div_u64(diff, diffms * 10);
dev_priv->ips.gfx_power = diff;
}
void i915_update_gfx_val(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
if (INTEL_INFO(dev)->gen != 5)
return;
spin_lock_irq(&mchdev_lock);
__i915_update_gfx_val(dev_priv);
spin_unlock_irq(&mchdev_lock);
}
static unsigned long __i915_gfx_val(struct drm_i915_private *dev_priv)
{
unsigned long t, corr, state1, corr2, state2;
u32 pxvid, ext_v;
assert_spin_locked(&mchdev_lock);
pxvid = I915_READ(PXVFREQ(dev_priv->rps.cur_freq));
pxvid = (pxvid >> 24) & 0x7f;
ext_v = pvid_to_extvid(dev_priv, pxvid);
state1 = ext_v;
t = i915_mch_val(dev_priv);
/* Revel in the empirically derived constants */
/* Correction factor in 1/100000 units */
if (t > 80)
corr = ((t * 2349) + 135940);
else if (t >= 50)
corr = ((t * 964) + 29317);
else /* < 50 */
corr = ((t * 301) + 1004);
corr = corr * ((150142 * state1) / 10000 - 78642);
corr /= 100000;
corr2 = (corr * dev_priv->ips.corr);
state2 = (corr2 * state1) / 10000;
state2 /= 100; /* convert to mW */
__i915_update_gfx_val(dev_priv);
return dev_priv->ips.gfx_power + state2;
}
unsigned long i915_gfx_val(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
unsigned long val;
if (INTEL_INFO(dev)->gen != 5)
return 0;
spin_lock_irq(&mchdev_lock);
val = __i915_gfx_val(dev_priv);
spin_unlock_irq(&mchdev_lock);
return val;
}
/**
* i915_read_mch_val - return value for IPS use
*
* Calculate and return a value for the IPS driver to use when deciding whether
* we have thermal and power headroom to increase CPU or GPU power budget.
*/
unsigned long i915_read_mch_val(void)
{
struct drm_i915_private *dev_priv;
unsigned long chipset_val, graphics_val, ret = 0;
spin_lock_irq(&mchdev_lock);
if (!i915_mch_dev)
goto out_unlock;
dev_priv = i915_mch_dev;
chipset_val = __i915_chipset_val(dev_priv);
graphics_val = __i915_gfx_val(dev_priv);
ret = chipset_val + graphics_val;
out_unlock:
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_read_mch_val);
/**
* i915_gpu_raise - raise GPU frequency limit
*
* Raise the limit; IPS indicates we have thermal headroom.
*/
bool i915_gpu_raise(void)
{
struct drm_i915_private *dev_priv;
bool ret = true;
spin_lock_irq(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
}
dev_priv = i915_mch_dev;
if (dev_priv->ips.max_delay > dev_priv->ips.fmax)
dev_priv->ips.max_delay--;
out_unlock:
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_raise);
/**
* i915_gpu_lower - lower GPU frequency limit
*
* IPS indicates we're close to a thermal limit, so throttle back the GPU
* frequency maximum.
*/
bool i915_gpu_lower(void)
{
struct drm_i915_private *dev_priv;
bool ret = true;
spin_lock_irq(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
}
dev_priv = i915_mch_dev;
if (dev_priv->ips.max_delay < dev_priv->ips.min_delay)
dev_priv->ips.max_delay++;
out_unlock:
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_lower);
/**
* i915_gpu_busy - indicate GPU business to IPS
*
* Tell the IPS driver whether or not the GPU is busy.
*/
bool i915_gpu_busy(void)
{
struct drm_i915_private *dev_priv;
struct intel_engine_cs *ring;
bool ret = false;
int i;
spin_lock_irq(&mchdev_lock);
if (!i915_mch_dev)
goto out_unlock;
dev_priv = i915_mch_dev;
for_each_ring(ring, dev_priv, i)
ret |= !list_empty(&ring->request_list);
out_unlock:
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_busy);
/**
* i915_gpu_turbo_disable - disable graphics turbo
*
* Disable graphics turbo by resetting the max frequency and setting the
* current frequency to the default.
*/
bool i915_gpu_turbo_disable(void)
{
struct drm_i915_private *dev_priv;
bool ret = true;
spin_lock_irq(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
}
dev_priv = i915_mch_dev;
dev_priv->ips.max_delay = dev_priv->ips.fstart;
if (!ironlake_set_drps(dev_priv->dev, dev_priv->ips.fstart))
ret = false;
out_unlock:
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
/**
* Tells the intel_ips driver that the i915 driver is now loaded, if
* IPS got loaded first.
*
* This awkward dance is so that neither module has to depend on the
* other in order for IPS to do the appropriate communication of
* GPU turbo limits to i915.
*/
static void
ips_ping_for_i915_load(void)
{
void (*link)(void);
link = symbol_get(ips_link_to_i915_driver);
if (link) {
link();
symbol_put(ips_link_to_i915_driver);
}
}
void intel_gpu_ips_init(struct drm_i915_private *dev_priv)
{
/* We only register the i915 ips part with intel-ips once everything is
* set up, to avoid intel-ips sneaking in and reading bogus values. */
spin_lock_irq(&mchdev_lock);
i915_mch_dev = dev_priv;
spin_unlock_irq(&mchdev_lock);
ips_ping_for_i915_load();
}
void intel_gpu_ips_teardown(void)
{
spin_lock_irq(&mchdev_lock);
i915_mch_dev = NULL;
spin_unlock_irq(&mchdev_lock);
}
static void intel_init_emon(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 lcfuse;
u8 pxw[16];
int i;
/* Disable to program */
I915_WRITE(ECR, 0);
POSTING_READ(ECR);
/* Program energy weights for various events */
I915_WRITE(SDEW, 0x15040d00);
I915_WRITE(CSIEW0, 0x007f0000);
I915_WRITE(CSIEW1, 0x1e220004);
I915_WRITE(CSIEW2, 0x04000004);
for (i = 0; i < 5; i++)
I915_WRITE(PEW(i), 0);
for (i = 0; i < 3; i++)
I915_WRITE(DEW(i), 0);
/* Program P-state weights to account for frequency power adjustment */
for (i = 0; i < 16; i++) {
u32 pxvidfreq = I915_READ(PXVFREQ(i));
unsigned long freq = intel_pxfreq(pxvidfreq);
unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
unsigned long val;
val = vid * vid;
val *= (freq / 1000);
val *= 255;
val /= (127*127*900);
if (val > 0xff)
DRM_ERROR("bad pxval: %ld\n", val);
pxw[i] = val;
}
/* Render standby states get 0 weight */
pxw[14] = 0;
pxw[15] = 0;
for (i = 0; i < 4; i++) {
u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
(pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
I915_WRITE(PXW(i), val);
}
/* Adjust magic regs to magic values (more experimental results) */
I915_WRITE(OGW0, 0);
I915_WRITE(OGW1, 0);
I915_WRITE(EG0, 0x00007f00);
I915_WRITE(EG1, 0x0000000e);
I915_WRITE(EG2, 0x000e0000);
I915_WRITE(EG3, 0x68000300);
I915_WRITE(EG4, 0x42000000);
I915_WRITE(EG5, 0x00140031);
I915_WRITE(EG6, 0);
I915_WRITE(EG7, 0);
for (i = 0; i < 8; i++)
I915_WRITE(PXWL(i), 0);
/* Enable PMON + select events */
I915_WRITE(ECR, 0x80000019);
lcfuse = I915_READ(LCFUSE02);
dev_priv->ips.corr = (lcfuse & LCFUSE_HIV_MASK);
}
void intel_init_gt_powersave(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/*
* RPM depends on RC6 to save restore the GT HW context, so make RC6 a
* requirement.
*/
if (!i915.enable_rc6) {
DRM_INFO("RC6 disabled, disabling runtime PM support\n");
intel_runtime_pm_get(dev_priv);
}
if (IS_CHERRYVIEW(dev))
cherryview_init_gt_powersave(dev);
else if (IS_VALLEYVIEW(dev))
valleyview_init_gt_powersave(dev);
}
void intel_cleanup_gt_powersave(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_CHERRYVIEW(dev))
return;
else if (IS_VALLEYVIEW(dev))
valleyview_cleanup_gt_powersave(dev);
if (!i915.enable_rc6)
intel_runtime_pm_put(dev_priv);
}
static void gen6_suspend_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
flush_delayed_work(&dev_priv->rps.delayed_resume_work);
gen6_disable_rps_interrupts(dev);
}
/**
* intel_suspend_gt_powersave - suspend PM work and helper threads
* @dev: drm device
*
* We don't want to disable RC6 or other features here, we just want
* to make sure any work we've queued has finished and won't bother
* us while we're suspended.
*/
void intel_suspend_gt_powersave(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915: sanitize rps irq disabling When disabling the RPS interrupts there is a tricky dependency between the thread disabling the interrupts, the RPS interrupt handler and the corresponding RPS work. The RPS work can reenable the interrupts, so there is no straightforward order in the disabling thread to (1) make sure that any RPS work is flushed and to (2) disable all RPS interrupts. Currently this is solved by masking the interrupts using two separate mask registers (first level display IMR and PM IMR) and doing the disabling when all first level interrupts are disabled. This works, but the requirement to run with all first level interrupts disabled is unnecessary making the suspend / unload time ordering of RPS disabling wrt. other unitialization steps difficult and error prone. Removing this restriction allows us to disable RPS early during suspend / unload and forget about it for the rest of the sequence. By adding a more explicit method for avoiding the above race, it also becomes easier to prove its correctness. Finally currently we can hit the WARN in snb_update_pm_irq(), when a final RPS work runs with the first level interrupts already disabled. This won't lead to any problem (due to the separate interrupt masks), but with the change in this and the next patch we can get rid of the WARN, while leaving it in place for other scenarios. To address the above points, add a new RPS interrupts_enabled flag and use this during RPS disabling to avoid requeuing the RPS work and reenabling of the RPS interrupts. Since the interrupt disabling happens now in intel_suspend_gt_powersave(), we will disable RPS interrupts explicitly during suspend (and not just through the first level mask), but there is no problem doing so, it's also more consistent and allows us to unify more of the RPS disabling during suspend and unload time in the next patch. v2/v3: - rebase on patch "drm/i915: move rps irq disable one level up" in the patchset Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-19 20:30:04 +07:00
if (INTEL_INFO(dev)->gen < 6)
return;
gen6_suspend_rps(dev);
/* Force GPU to min freq during suspend */
gen6_rps_idle(dev_priv);
}
void intel_disable_gt_powersave(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_IRONLAKE_M(dev)) {
ironlake_disable_drps(dev);
} else if (INTEL_INFO(dev)->gen >= 6) {
intel_suspend_gt_powersave(dev);
mutex_lock(&dev_priv->rps.hw_lock);
if (INTEL_INFO(dev)->gen >= 9)
gen9_disable_rps(dev);
else if (IS_CHERRYVIEW(dev))
cherryview_disable_rps(dev);
else if (IS_VALLEYVIEW(dev))
valleyview_disable_rps(dev);
else
gen6_disable_rps(dev);
dev_priv->rps.enabled = false;
mutex_unlock(&dev_priv->rps.hw_lock);
}
}
static void intel_gen6_powersave_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, struct drm_i915_private,
rps.delayed_resume_work.work);
struct drm_device *dev = dev_priv->dev;
mutex_lock(&dev_priv->rps.hw_lock);
gen6_reset_rps_interrupts(dev);
if (IS_CHERRYVIEW(dev)) {
cherryview_enable_rps(dev);
} else if (IS_VALLEYVIEW(dev)) {
valleyview_enable_rps(dev);
} else if (INTEL_INFO(dev)->gen >= 9) {
gen9_enable_rc6(dev);
gen9_enable_rps(dev);
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
__gen6_update_ring_freq(dev);
} else if (IS_BROADWELL(dev)) {
gen8_enable_rps(dev);
__gen6_update_ring_freq(dev);
} else {
gen6_enable_rps(dev);
__gen6_update_ring_freq(dev);
}
WARN_ON(dev_priv->rps.max_freq < dev_priv->rps.min_freq);
WARN_ON(dev_priv->rps.idle_freq > dev_priv->rps.max_freq);
WARN_ON(dev_priv->rps.efficient_freq < dev_priv->rps.min_freq);
WARN_ON(dev_priv->rps.efficient_freq > dev_priv->rps.max_freq);
dev_priv->rps.enabled = true;
gen6_enable_rps_interrupts(dev);
mutex_unlock(&dev_priv->rps.hw_lock);
intel_runtime_pm_put(dev_priv);
}
void intel_enable_gt_powersave(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* Powersaving is controlled by the host when inside a VM */
if (intel_vgpu_active(dev))
return;
if (IS_IRONLAKE_M(dev)) {
mutex_lock(&dev->struct_mutex);
ironlake_enable_drps(dev);
intel_init_emon(dev);
mutex_unlock(&dev->struct_mutex);
} else if (INTEL_INFO(dev)->gen >= 6) {
/*
* PCU communication is slow and this doesn't need to be
* done at any specific time, so do this out of our fast path
* to make resume and init faster.
*
* We depend on the HW RC6 power context save/restore
* mechanism when entering D3 through runtime PM suspend. So
* disable RPM until RPS/RC6 is properly setup. We can only
* get here via the driver load/system resume/runtime resume
* paths, so the _noresume version is enough (and in case of
* runtime resume it's necessary).
*/
if (schedule_delayed_work(&dev_priv->rps.delayed_resume_work,
round_jiffies_up_relative(HZ)))
intel_runtime_pm_get_noresume(dev_priv);
}
}
void intel_reset_gt_powersave(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (INTEL_INFO(dev)->gen < 6)
return;
gen6_suspend_rps(dev);
dev_priv->rps.enabled = false;
}
static void ibx_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/*
* On Ibex Peak and Cougar Point, we need to disable clock
* gating for the panel power sequencer or it will fail to
* start up when no ports are active.
*/
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
}
static void g4x_disable_trickle_feed(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
for_each_pipe(dev_priv, pipe) {
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
DISPPLANE_TRICKLE_FEED_DISABLE);
I915_WRITE(DSPSURF(pipe), I915_READ(DSPSURF(pipe)));
POSTING_READ(DSPSURF(pipe));
}
}
static void ilk_init_lp_watermarks(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(WM3_LP_ILK, I915_READ(WM3_LP_ILK) & ~WM1_LP_SR_EN);
I915_WRITE(WM2_LP_ILK, I915_READ(WM2_LP_ILK) & ~WM1_LP_SR_EN);
I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN);
/*
* Don't touch WM1S_LP_EN here.
* Doing so could cause underruns.
*/
}
static void ironlake_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 23:55:41 +07:00
uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
/*
* Required for FBC
* WaFbcDisableDpfcClockGating:ilk
*/
dspclk_gate |= ILK_DPFCRUNIT_CLOCK_GATE_DISABLE |
ILK_DPFCUNIT_CLOCK_GATE_DISABLE |
ILK_DPFDUNIT_CLOCK_GATE_ENABLE;
I915_WRITE(PCH_3DCGDIS0,
MARIUNIT_CLOCK_GATE_DISABLE |
SVSMUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(PCH_3DCGDIS1,
VFMUNIT_CLOCK_GATE_DISABLE);
/*
* According to the spec the following bits should be set in
* order to enable memory self-refresh
* The bit 22/21 of 0x42004
* The bit 5 of 0x42020
* The bit 15 of 0x45000
*/
I915_WRITE(ILK_DISPLAY_CHICKEN2,
(I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE | ILK_VSDPFD_FULL));
dspclk_gate |= ILK_DPARBUNIT_CLOCK_GATE_ENABLE;
I915_WRITE(DISP_ARB_CTL,
(I915_READ(DISP_ARB_CTL) |
DISP_FBC_WM_DIS));
ilk_init_lp_watermarks(dev);
/*
* Based on the document from hardware guys the following bits
* should be set unconditionally in order to enable FBC.
* The bit 22 of 0x42000
* The bit 22 of 0x42004
* The bit 7,8,9 of 0x42020.
*/
if (IS_IRONLAKE_M(dev)) {
/* WaFbcAsynchFlipDisableFbcQueue:ilk */
I915_WRITE(ILK_DISPLAY_CHICKEN1,
I915_READ(ILK_DISPLAY_CHICKEN1) |
ILK_FBCQ_DIS);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE);
}
I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_ELPIN_409_SELECT);
I915_WRITE(_3D_CHICKEN2,
_3D_CHICKEN2_WM_READ_PIPELINED << 16 |
_3D_CHICKEN2_WM_READ_PIPELINED);
/* WaDisableRenderCachePipelinedFlush:ilk */
I915_WRITE(CACHE_MODE_0,
_MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
/* WaDisable_RenderCache_OperationalFlush:ilk */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
g4x_disable_trickle_feed(dev);
ibx_init_clock_gating(dev);
}
static void cpt_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
uint32_t val;
/*
* On Ibex Peak and Cougar Point, we need to disable clock
* gating for the panel power sequencer or it will fail to
* start up when no ports are active.
*/
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE |
PCH_DPLUNIT_CLOCK_GATE_DISABLE |
PCH_CPUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
DPLS_EDP_PPS_FIX_DIS);
/* The below fixes the weird display corruption, a few pixels shifted
* downward, on (only) LVDS of some HP laptops with IVY.
*/
for_each_pipe(dev_priv, pipe) {
val = I915_READ(TRANS_CHICKEN2(pipe));
val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
if (dev_priv->vbt.fdi_rx_polarity_inverted)
val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER;
val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH;
I915_WRITE(TRANS_CHICKEN2(pipe), val);
}
/* WADP0ClockGatingDisable */
for_each_pipe(dev_priv, pipe) {
I915_WRITE(TRANS_CHICKEN1(pipe),
TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
}
}
static void gen6_check_mch_setup(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t tmp;
tmp = I915_READ(MCH_SSKPD);
if ((tmp & MCH_SSKPD_WM0_MASK) != MCH_SSKPD_WM0_VAL)
DRM_DEBUG_KMS("Wrong MCH_SSKPD value: 0x%08x This can cause underruns.\n",
tmp);
}
static void gen6_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 23:55:41 +07:00
uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 23:55:41 +07:00
I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_ELPIN_409_SELECT);
/* WaDisableHiZPlanesWhenMSAAEnabled:snb */
I915_WRITE(_3D_CHICKEN,
_MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB));
/* WaDisable_RenderCache_OperationalFlush:snb */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
/*
* BSpec recoomends 8x4 when MSAA is used,
* however in practice 16x4 seems fastest.
*
* Note that PS/WM thread counts depend on the WIZ hashing
* disable bit, which we don't touch here, but it's good
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
*/
I915_WRITE(GEN6_GT_MODE,
drm/i915/bdw: Fix the write setting up the WIZ hashing mode I was playing with clang and oh surprise! a warning trigerred by -Wshift-overflow (gcc doesn't have this one): WA_SET_BIT_MASKED(GEN7_GT_MODE, GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); drivers/gpu/drm/i915/intel_ringbuffer.c:786:2: warning: signed shift result (0x28002000000) requires 43 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] WA_SET_BIT_MASKED(GEN7_GT_MODE, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_ringbuffer.c:737:15: note: expanded from macro 'WA_SET_BIT_MASKED' WA_REG(addr, _MASKED_BIT_ENABLE(mask), (mask) & 0xffff) Turned out GEN6_WIZ_HASHING_MASK was already shifted by 16, and we were trying to shift it a bit more. The other thing is that it's not the usual case of setting WA bits here, we need to have separate mask and value. To fix this, I've introduced a new _MASKED_FIELD() macro that takes both the (unshifted) mask and the desired value and the rest of the patch ripples through from it. This bug was introduced when reworking the WA emission in: Commit 7225342ab501befdb64bcec76ded41f5897c0855 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Oct 7 17:21:26 2014 +0300 drm/i915: Build workaround list in ring initialization v2: Invert the order of the mask and value arguments (Daniel Vetter) Rewrite _MASKED_BIT_ENABLE() and _MASKED_BIT_DISABLE() with _MASKED_FIELD() (Jani Nikula) Make sure we only evaluate 'a' once in _MASKED_BIT_ENABLE() (Dave Gordon) Add check to ensure the value is within the mask boundaries (Chris Wilson) v3: Ensure the the value and mask are 16 bits (Dave Gordon) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-09 00:33:51 +07:00
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
ilk_init_lp_watermarks(dev);
I915_WRITE(CACHE_MODE_0,
_MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB));
I915_WRITE(GEN6_UCGCTL1,
I915_READ(GEN6_UCGCTL1) |
GEN6_BLBUNIT_CLOCK_GATE_DISABLE |
GEN6_CSUNIT_CLOCK_GATE_DISABLE);
/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
* gating disable must be set. Failure to set it results in
* flickering pixels due to Z write ordering failures after
* some amount of runtime in the Mesa "fire" demo, and Unigine
* Sanctuary and Tropics, and apparently anything else with
* alpha test or pixel discard.
*
* According to the spec, bit 11 (RCCUNIT) must also be set,
* but we didn't debug actual testcases to find it out.
*
* WaDisableRCCUnitClockGating:snb
* WaDisableRCPBUnitClockGating:snb
*/
I915_WRITE(GEN6_UCGCTL2,
GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
/* WaStripsFansDisableFastClipPerformanceFix:snb */
I915_WRITE(_3D_CHICKEN3,
_MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL));
/*
* Bspec says:
* "This bit must be set if 3DSTATE_CLIP clip mode is set to normal and
* 3DSTATE_SF number of SF output attributes is more than 16."
*/
I915_WRITE(_3D_CHICKEN3,
_MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH));
/*
* According to the spec the following bits should be
* set in order to enable memory self-refresh and fbc:
* The bit21 and bit22 of 0x42000
* The bit21 and bit22 of 0x42004
* The bit5 and bit7 of 0x42020
* The bit14 of 0x70180
* The bit14 of 0x71180
*
* WaFbcAsynchFlipDisableFbcQueue:snb
*/
I915_WRITE(ILK_DISPLAY_CHICKEN1,
I915_READ(ILK_DISPLAY_CHICKEN1) |
ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE | ILK_VSDPFD_FULL);
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 23:55:41 +07:00
I915_WRITE(ILK_DSPCLK_GATE_D,
I915_READ(ILK_DSPCLK_GATE_D) |
ILK_DPARBUNIT_CLOCK_GATE_ENABLE |
ILK_DPFDUNIT_CLOCK_GATE_ENABLE);
g4x_disable_trickle_feed(dev);
cpt_init_clock_gating(dev);
gen6_check_mch_setup(dev);
}
static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv)
{
uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE);
/*
* WaVSThreadDispatchOverride:ivb,vlv
*
* This actually overrides the dispatch
* mode for all thread types.
*/
reg &= ~GEN7_FF_SCHED_MASK;
reg |= GEN7_FF_TS_SCHED_HW;
reg |= GEN7_FF_VS_SCHED_HW;
reg |= GEN7_FF_DS_SCHED_HW;
I915_WRITE(GEN7_FF_THREAD_MODE, reg);
}
static void lpt_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/*
* TODO: this bit should only be enabled when really needed, then
* disabled when not needed anymore in order to save power.
*/
if (HAS_PCH_LPT_LP(dev))
I915_WRITE(SOUTH_DSPCLK_GATE_D,
I915_READ(SOUTH_DSPCLK_GATE_D) |
PCH_LP_PARTITION_LEVEL_DISABLE);
/* WADPOClockGatingDisable:hsw */
I915_WRITE(TRANS_CHICKEN1(PIPE_A),
I915_READ(TRANS_CHICKEN1(PIPE_A)) |
TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
}
static void lpt_suspend_hw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (HAS_PCH_LPT_LP(dev)) {
uint32_t val = I915_READ(SOUTH_DSPCLK_GATE_D);
val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
}
}
static void broadwell_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
uint32_t misccpctl;
ilk_init_lp_watermarks(dev);
/* WaSwitchSolVfFArbitrationPriority:bdw */
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
/* WaPsrDPAMaskVBlankInSRD:bdw */
I915_WRITE(CHICKEN_PAR1_1,
I915_READ(CHICKEN_PAR1_1) | DPA_MASK_VBLANK_SRD);
/* WaPsrDPRSUnmaskVBlankInSRD:bdw */
for_each_pipe(dev_priv, pipe) {
I915_WRITE(CHICKEN_PIPESL_1(pipe),
I915_READ(CHICKEN_PIPESL_1(pipe)) |
BDW_DPRS_MASK_VBLANK_SRD);
}
/* WaVSRefCountFullforceMissDisable:bdw */
/* WaDSRefCountFullforceMissDisable:bdw */
I915_WRITE(GEN7_FF_THREAD_MODE,
I915_READ(GEN7_FF_THREAD_MODE) &
~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME));
I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
_MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE));
/* WaDisableSDEUnitClockGating:bdw */
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
/*
* WaProgramL3SqcReg1Default:bdw
* WaTempDisableDOPClkGating:bdw
*/
misccpctl = I915_READ(GEN7_MISCCPCTL);
I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
I915_WRITE(GEN8_L3SQCREG1, BDW_WA_L3SQCREG1_DEFAULT);
I915_WRITE(GEN7_MISCCPCTL, misccpctl);
/*
* WaGttCachingOffByDefault:bdw
* GTT cache may not work with big pages, so if those
* are ever enabled GTT cache may need to be disabled.
*/
I915_WRITE(HSW_GTT_CACHE_EN, GTT_CACHE_EN_ALL);
lpt_init_clock_gating(dev);
}
static void haswell_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
ilk_init_lp_watermarks(dev);
/* L3 caching of data atomics doesn't work -- disable it. */
I915_WRITE(HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE);
I915_WRITE(HSW_ROW_CHICKEN3,
_MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE));
/* This is required by WaCatErrorRejectionIssue:hsw */
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
/* WaVSRefCountFullforceMissDisable:hsw */
I915_WRITE(GEN7_FF_THREAD_MODE,
I915_READ(GEN7_FF_THREAD_MODE) & ~GEN7_FF_VS_REF_CNT_FFME);
/* WaDisable_RenderCache_OperationalFlush:hsw */
I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
/* enable HiZ Raw Stall Optimization */
I915_WRITE(CACHE_MODE_0_GEN7,
_MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE));
/* WaDisable4x2SubspanOptimization:hsw */
I915_WRITE(CACHE_MODE_1,
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
/*
* BSpec recommends 8x4 when MSAA is used,
* however in practice 16x4 seems fastest.
*
* Note that PS/WM thread counts depend on the WIZ hashing
* disable bit, which we don't touch here, but it's good
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
*/
I915_WRITE(GEN7_GT_MODE,
drm/i915/bdw: Fix the write setting up the WIZ hashing mode I was playing with clang and oh surprise! a warning trigerred by -Wshift-overflow (gcc doesn't have this one): WA_SET_BIT_MASKED(GEN7_GT_MODE, GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); drivers/gpu/drm/i915/intel_ringbuffer.c:786:2: warning: signed shift result (0x28002000000) requires 43 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] WA_SET_BIT_MASKED(GEN7_GT_MODE, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_ringbuffer.c:737:15: note: expanded from macro 'WA_SET_BIT_MASKED' WA_REG(addr, _MASKED_BIT_ENABLE(mask), (mask) & 0xffff) Turned out GEN6_WIZ_HASHING_MASK was already shifted by 16, and we were trying to shift it a bit more. The other thing is that it's not the usual case of setting WA bits here, we need to have separate mask and value. To fix this, I've introduced a new _MASKED_FIELD() macro that takes both the (unshifted) mask and the desired value and the rest of the patch ripples through from it. This bug was introduced when reworking the WA emission in: Commit 7225342ab501befdb64bcec76ded41f5897c0855 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Oct 7 17:21:26 2014 +0300 drm/i915: Build workaround list in ring initialization v2: Invert the order of the mask and value arguments (Daniel Vetter) Rewrite _MASKED_BIT_ENABLE() and _MASKED_BIT_DISABLE() with _MASKED_FIELD() (Jani Nikula) Make sure we only evaluate 'a' once in _MASKED_BIT_ENABLE() (Dave Gordon) Add check to ensure the value is within the mask boundaries (Chris Wilson) v3: Ensure the the value and mask are 16 bits (Dave Gordon) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-09 00:33:51 +07:00
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
drm/i915: Make sample_c messages go faster on Haswell. Haswell significantly improved the performance of sampler_c messages, but the optimization appears to be off by default. Later platforms remove this bit, and apparently always enable the optimization. Improves performance in "Counter Strike: Global Offensive" by 18% at default settings on Iris Pro. This may break sampling of paletted formats (P8/A8P8/P8A8). It's unclear whether it affects sampling of paletted formats in general, or just the sample_c message (which is never used). While libva does have support for using paletted formats (primarily for OSDs), that support appears to have been broken for at least a year, so I couldn't observe a regression from this: I tried to get libva-intel to use paletted formats, and observe a regression...but the only thing I found that used it was mplayer's OSD (on screen display). Even without my patch, the colors were totally wrong with that, and it's according to a few distro wikis, that's been the case for over a year. If libva's code for paletted formats /is/ broken, they could always add code to disable this bit using the command validator when fixing it. Further investigation from Haihao shows that libva mplayer OSD seems to work at least on his setup (still unclear what's wron with Ken's), and that it's not affected by this patch. Quoting the discussion between Haihao and Ken: > > > If you use "-vo gl" or "-vo xv", the OSD is solid white text with a black > > > border around it. I presume that it's supposed to be white with vaapi as > > > well, but I guess I'm not entirely sure. > > > > > > It's possible that the optimization doesn't affect the palette as long as > > > you never use sample_c with the paletted textures. > > > > I verified the palette takes effect in the following way: > > > > 1. Only support P8A8 format in the driver > > > > 2. ran the above command and I saw white OSD text > > > > 3. Only support P4A4 format in the driver and don't use > > 3DSTATE_SAMPLER_PALETTE_LOAD0 to load the value to the texture palette, > > so the palette keeps unchanged. > > > > 4. ran the above command and I saw black OSD text. > > > > 5. Load the right value to the texture palette and ran the above command > > again, I saw white OSD text. > > > > Hence I think sample_c with the paletted textures is used in the driver. > > That sounds like the palette is actually working, then. Great :) > > I doubt that libva would use sample_c - sampling with a shadow comparison? > It looks like it just uses sample and sample+killpix. You are right, libva driver doesn't use sample_c message. > I'm pretty sure the sample_c optimization just uses the palette memory as > storage for some stuff, so it's quite possible it just works if you're > only using sample and sample+killpix. Thanks for the explanation, it makes sense to me. Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [danvet: Add wa name from Ville's review to the comment and copypaste the explanation why we don't care about libva (already broken) from Ken. Also add conclusion from libva devs that&why this is all fine.] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: "Xiang, Haihao" <haihao.xiang@intel.com> Cc: libva@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-01 07:23:00 +07:00
/* WaSampleCChickenBitEnable:hsw */
I915_WRITE(HALF_SLICE_CHICKEN3,
_MASKED_BIT_ENABLE(HSW_SAMPLE_C_PERFORMANCE));
/* WaSwitchSolVfFArbitrationPriority:hsw */
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
/* WaRsPkgCStateDisplayPMReq:hsw */
I915_WRITE(CHICKEN_PAR1_1,
I915_READ(CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES);
lpt_init_clock_gating(dev);
}
static void ivybridge_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t snpcr;
ilk_init_lp_watermarks(dev);
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 23:55:41 +07:00
I915_WRITE(ILK_DSPCLK_GATE_D, ILK_VRHUNIT_CLOCK_GATE_DISABLE);
/* WaDisableEarlyCull:ivb */
I915_WRITE(_3D_CHICKEN3,
_MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
/* WaDisableBackToBackFlipFix:ivb */
I915_WRITE(IVB_CHICKEN3,
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
CHICKEN3_DGMG_DONE_FIX_DISABLE);
/* WaDisablePSDDualDispatchEnable:ivb */
if (IS_IVB_GT1(dev))
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
_MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
/* WaDisable_RenderCache_OperationalFlush:ivb */
I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
/* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */
I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
/* WaApplyL3ControlAndL3ChickenMode:ivb */
I915_WRITE(GEN7_L3CNTLREG1,
GEN7_WA_FOR_GEN7_L3_CONTROL);
I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
GEN7_WA_L3_CHICKEN_MODE);
if (IS_IVB_GT1(dev))
I915_WRITE(GEN7_ROW_CHICKEN2,
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
else {
/* must write both registers */
I915_WRITE(GEN7_ROW_CHICKEN2,
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
I915_WRITE(GEN7_ROW_CHICKEN2_GT2,
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
}
/* WaForceL3Serialization:ivb */
I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
~L3SQ_URB_READ_CAM_MATCH_DISABLE);
/*
* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
* This implements the WaDisableRCZUnitClockGating:ivb workaround.
*/
I915_WRITE(GEN6_UCGCTL2,
GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
/* This is required by WaCatErrorRejectionIssue:ivb */
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
g4x_disable_trickle_feed(dev);
gen7_setup_fixed_func_scheduler(dev_priv);
if (0) { /* causes HiZ corruption on ivb:gt1 */
/* enable HiZ Raw Stall Optimization */
I915_WRITE(CACHE_MODE_0_GEN7,
_MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE));
}
/* WaDisable4x2SubspanOptimization:ivb */
I915_WRITE(CACHE_MODE_1,
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
/*
* BSpec recommends 8x4 when MSAA is used,
* however in practice 16x4 seems fastest.
*
* Note that PS/WM thread counts depend on the WIZ hashing
* disable bit, which we don't touch here, but it's good
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
*/
I915_WRITE(GEN7_GT_MODE,
drm/i915/bdw: Fix the write setting up the WIZ hashing mode I was playing with clang and oh surprise! a warning trigerred by -Wshift-overflow (gcc doesn't have this one): WA_SET_BIT_MASKED(GEN7_GT_MODE, GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); drivers/gpu/drm/i915/intel_ringbuffer.c:786:2: warning: signed shift result (0x28002000000) requires 43 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] WA_SET_BIT_MASKED(GEN7_GT_MODE, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_ringbuffer.c:737:15: note: expanded from macro 'WA_SET_BIT_MASKED' WA_REG(addr, _MASKED_BIT_ENABLE(mask), (mask) & 0xffff) Turned out GEN6_WIZ_HASHING_MASK was already shifted by 16, and we were trying to shift it a bit more. The other thing is that it's not the usual case of setting WA bits here, we need to have separate mask and value. To fix this, I've introduced a new _MASKED_FIELD() macro that takes both the (unshifted) mask and the desired value and the rest of the patch ripples through from it. This bug was introduced when reworking the WA emission in: Commit 7225342ab501befdb64bcec76ded41f5897c0855 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Oct 7 17:21:26 2014 +0300 drm/i915: Build workaround list in ring initialization v2: Invert the order of the mask and value arguments (Daniel Vetter) Rewrite _MASKED_BIT_ENABLE() and _MASKED_BIT_DISABLE() with _MASKED_FIELD() (Jani Nikula) Make sure we only evaluate 'a' once in _MASKED_BIT_ENABLE() (Dave Gordon) Add check to ensure the value is within the mask boundaries (Chris Wilson) v3: Ensure the the value and mask are 16 bits (Dave Gordon) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-09 00:33:51 +07:00
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
snpcr = I915_READ(GEN6_MBCUNIT_SNPCR);
snpcr &= ~GEN6_MBC_SNPCR_MASK;
snpcr |= GEN6_MBC_SNPCR_MED;
I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr);
if (!HAS_PCH_NOP(dev))
cpt_init_clock_gating(dev);
gen6_check_mch_setup(dev);
}
static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
{
I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
/*
* Disable trickle feed and enable pnd deadline calculation
*/
I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
I915_WRITE(CBR1_VLV, 0);
}
static void valleyview_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
vlv_init_display_clock_gating(dev_priv);
/* WaDisableEarlyCull:vlv */
I915_WRITE(_3D_CHICKEN3,
_MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
/* WaDisableBackToBackFlipFix:vlv */
I915_WRITE(IVB_CHICKEN3,
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
CHICKEN3_DGMG_DONE_FIX_DISABLE);
/* WaPsdDispatchEnable:vlv */
/* WaDisablePSDDualDispatchEnable:vlv */
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
_MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP |
GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
/* WaDisable_RenderCache_OperationalFlush:vlv */
I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
/* WaForceL3Serialization:vlv */
I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
~L3SQ_URB_READ_CAM_MATCH_DISABLE);
/* WaDisableDopClockGating:vlv */
I915_WRITE(GEN7_ROW_CHICKEN2,
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
/* This is required by WaCatErrorRejectionIssue:vlv */
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
gen7_setup_fixed_func_scheduler(dev_priv);
/*
* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
* This implements the WaDisableRCZUnitClockGating:vlv workaround.
*/
I915_WRITE(GEN6_UCGCTL2,
GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
/* WaDisableL3Bank2xClockGate:vlv
* Disabling L3 clock gating- MMIO 940c[25] = 1
* Set bit 25, to disable L3_BANK_2x_CLK_GATING */
I915_WRITE(GEN7_UCGCTL4,
I915_READ(GEN7_UCGCTL4) | GEN7_L3BANK2X_CLOCK_GATE_DISABLE);
/*
* BSpec says this must be set, even though
* WaDisable4x2SubspanOptimization isn't listed for VLV.
*/
I915_WRITE(CACHE_MODE_1,
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
/*
* BSpec recommends 8x4 when MSAA is used,
* however in practice 16x4 seems fastest.
*
* Note that PS/WM thread counts depend on the WIZ hashing
* disable bit, which we don't touch here, but it's good
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
*/
I915_WRITE(GEN7_GT_MODE,
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
/*
* WaIncreaseL3CreditsForVLVB0:vlv
* This is the hardware default actually.
*/
I915_WRITE(GEN7_L3SQCREG1, VLV_B0_WA_L3SQCREG1_VALUE);
/*
* WaDisableVLVClockGating_VBIIssue:vlv
* Disable clock gating on th GCFG unit to prevent a delay
* in the reporting of vblank events.
*/
I915_WRITE(VLV_GUNIT_CLOCK_GATE, GCFG_DIS);
}
static void cherryview_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
vlv_init_display_clock_gating(dev_priv);
/* WaVSRefCountFullforceMissDisable:chv */
/* WaDSRefCountFullforceMissDisable:chv */
I915_WRITE(GEN7_FF_THREAD_MODE,
I915_READ(GEN7_FF_THREAD_MODE) &
~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME));
/* WaDisableSemaphoreAndSyncFlipWait:chv */
I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
_MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE));
/* WaDisableCSUnitClockGating:chv */
I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) |
GEN6_CSUNIT_CLOCK_GATE_DISABLE);
/* WaDisableSDEUnitClockGating:chv */
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
/*
* GTT cache may not work with big pages, so if those
* are ever enabled GTT cache may need to be disabled.
*/
I915_WRITE(HSW_GTT_CACHE_EN, GTT_CACHE_EN_ALL);
}
static void g4x_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dspclk_gate;
I915_WRITE(RENCLK_GATE_D1, 0);
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
GS_UNIT_CLOCK_GATE_DISABLE |
CL_UNIT_CLOCK_GATE_DISABLE);
I915_WRITE(RAMCLK_GATE_D, 0);
dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
OVRUNIT_CLOCK_GATE_DISABLE |
OVCUNIT_CLOCK_GATE_DISABLE;
if (IS_GM45(dev))
dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
/* WaDisableRenderCachePipelinedFlush */
I915_WRITE(CACHE_MODE_0,
_MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
/* WaDisable_RenderCache_OperationalFlush:g4x */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
g4x_disable_trickle_feed(dev);
}
static void crestline_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
I915_WRITE(RENCLK_GATE_D2, 0);
I915_WRITE(DSPCLK_GATE_D, 0);
I915_WRITE(RAMCLK_GATE_D, 0);
I915_WRITE16(DEUC, 0);
I915_WRITE(MI_ARB_STATE,
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
/* WaDisable_RenderCache_OperationalFlush:gen4 */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
}
static void broadwater_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
I965_RCC_CLOCK_GATE_DISABLE |
I965_RCPB_CLOCK_GATE_DISABLE |
I965_ISC_CLOCK_GATE_DISABLE |
I965_FBC_CLOCK_GATE_DISABLE);
I915_WRITE(RENCLK_GATE_D2, 0);
I915_WRITE(MI_ARB_STATE,
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
/* WaDisable_RenderCache_OperationalFlush:gen4 */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
}
static void gen3_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dstate = I915_READ(D_STATE);
dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
DSTATE_DOT_CLOCK_GATING;
I915_WRITE(D_STATE, dstate);
if (IS_PINEVIEW(dev))
I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY));
/* IIR "flip pending" means done if this bit is set */
I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
/* interrupts should cause a wake up from C3 */
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_INT_EN));
/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE));
I915_WRITE(MI_ARB_STATE,
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
}
static void i85x_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
/* interrupts should cause a wake up from C3 */
I915_WRITE(MI_STATE, _MASKED_BIT_ENABLE(MI_AGPBUSY_INT_EN) |
_MASKED_BIT_DISABLE(MI_AGPBUSY_830_MODE));
I915_WRITE(MEM_MODE,
_MASKED_BIT_ENABLE(MEM_DISPLAY_TRICKLE_FEED_DISABLE));
}
static void i830_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(MEM_MODE,
_MASKED_BIT_ENABLE(MEM_DISPLAY_A_TRICKLE_FEED_DISABLE) |
_MASKED_BIT_ENABLE(MEM_DISPLAY_B_TRICKLE_FEED_DISABLE));
}
void intel_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->display.init_clock_gating)
dev_priv->display.init_clock_gating(dev);
}
void intel_suspend_hw(struct drm_device *dev)
{
if (HAS_PCH_LPT(dev))
lpt_suspend_hw(dev);
}
/* Set up chip specific power management-related functions */
void intel_init_pm(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
intel_fbc_init(dev_priv);
/* For cxsr */
if (IS_PINEVIEW(dev))
i915_pineview_get_mem_freq(dev);
else if (IS_GEN5(dev))
i915_ironlake_get_mem_freq(dev);
/* For FIFO watermark updates */
if (INTEL_INFO(dev)->gen >= 9) {
skl_setup_wm_latency(dev);
if (IS_BROXTON(dev))
dev_priv->display.init_clock_gating =
bxt_init_clock_gating;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 00:06:42 +07:00
dev_priv->display.update_wm = skl_update_wm;
} else if (HAS_PCH_SPLIT(dev)) {
ilk_setup_wm_latency(dev);
if ((IS_GEN5(dev) && dev_priv->wm.pri_latency[1] &&
dev_priv->wm.spr_latency[1] && dev_priv->wm.cur_latency[1]) ||
(!IS_GEN5(dev) && dev_priv->wm.pri_latency[0] &&
dev_priv->wm.spr_latency[0] && dev_priv->wm.cur_latency[0])) {
dev_priv->display.update_wm = ilk_update_wm;
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-25 05:53:16 +07:00
dev_priv->display.compute_pipe_wm = ilk_compute_pipe_wm;
dev_priv->display.program_watermarks = ilk_program_watermarks;
} else {
DRM_DEBUG_KMS("Failed to read display plane latency. "
"Disable CxSR\n");
}
if (IS_GEN5(dev))
dev_priv->display.init_clock_gating = ironlake_init_clock_gating;
else if (IS_GEN6(dev))
dev_priv->display.init_clock_gating = gen6_init_clock_gating;
else if (IS_IVYBRIDGE(dev))
dev_priv->display.init_clock_gating = ivybridge_init_clock_gating;
else if (IS_HASWELL(dev))
dev_priv->display.init_clock_gating = haswell_init_clock_gating;
else if (INTEL_INFO(dev)->gen == 8)
dev_priv->display.init_clock_gating = broadwell_init_clock_gating;
} else if (IS_CHERRYVIEW(dev)) {
vlv_setup_wm_latency(dev);
dev_priv->display.update_wm = vlv_update_wm;
dev_priv->display.init_clock_gating =
cherryview_init_clock_gating;
} else if (IS_VALLEYVIEW(dev)) {
vlv_setup_wm_latency(dev);
dev_priv->display.update_wm = vlv_update_wm;
dev_priv->display.init_clock_gating =
valleyview_init_clock_gating;
} else if (IS_PINEVIEW(dev)) {
if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
dev_priv->is_ddr3,
dev_priv->fsb_freq,
dev_priv->mem_freq)) {
DRM_INFO("failed to find known CxSR latency "
"(found ddr%s fsb freq %d, mem freq %d), "
"disabling CxSR\n",
(dev_priv->is_ddr3 == 1) ? "3" : "2",
dev_priv->fsb_freq, dev_priv->mem_freq);
/* Disable CxSR and never update its watermark again */
intel_set_memory_cxsr(dev_priv, false);
dev_priv->display.update_wm = NULL;
} else
dev_priv->display.update_wm = pineview_update_wm;
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
} else if (IS_G4X(dev)) {
dev_priv->display.update_wm = g4x_update_wm;
dev_priv->display.init_clock_gating = g4x_init_clock_gating;
} else if (IS_GEN4(dev)) {
dev_priv->display.update_wm = i965_update_wm;
if (IS_CRESTLINE(dev))
dev_priv->display.init_clock_gating = crestline_init_clock_gating;
else if (IS_BROADWATER(dev))
dev_priv->display.init_clock_gating = broadwater_init_clock_gating;
} else if (IS_GEN3(dev)) {
dev_priv->display.update_wm = i9xx_update_wm;
dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
} else if (IS_GEN2(dev)) {
if (INTEL_INFO(dev)->num_pipes == 1) {
dev_priv->display.update_wm = i845_update_wm;
dev_priv->display.get_fifo_size = i845_get_fifo_size;
} else {
dev_priv->display.update_wm = i9xx_update_wm;
dev_priv->display.get_fifo_size = i830_get_fifo_size;
}
if (IS_I85X(dev) || IS_I865G(dev))
dev_priv->display.init_clock_gating = i85x_init_clock_gating;
else
dev_priv->display.init_clock_gating = i830_init_clock_gating;
} else {
DRM_ERROR("unexpected fall-through in intel_init_pm\n");
}
}
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
{
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) {
DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed\n");
return -EAGAIN;
}
I915_WRITE(GEN6_PCODE_DATA, *val);
I915_WRITE(GEN6_PCODE_DATA1, 0);
I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
500)) {
DRM_ERROR("timeout waiting for pcode read (%d) to finish\n", mbox);
return -ETIMEDOUT;
}
*val = I915_READ(GEN6_PCODE_DATA);
I915_WRITE(GEN6_PCODE_DATA, 0);
return 0;
}
int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u32 mbox, u32 val)
{
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) {
DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed\n");
return -EAGAIN;
}
I915_WRITE(GEN6_PCODE_DATA, val);
I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
500)) {
DRM_ERROR("timeout waiting for pcode write (%d) to finish\n", mbox);
return -ETIMEDOUT;
}
I915_WRITE(GEN6_PCODE_DATA, 0);
return 0;
}
static int vlv_gpu_freq_div(unsigned int czclk_freq)
{
switch (czclk_freq) {
case 200:
return 10;
case 267:
return 12;
case 320:
case 333:
return 16;
case 400:
return 20;
default:
return -1;
}
}
static int byt_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
int div, czclk_freq = DIV_ROUND_CLOSEST(dev_priv->czclk_freq, 1000);
div = vlv_gpu_freq_div(czclk_freq);
if (div < 0)
return div;
return DIV_ROUND_CLOSEST(czclk_freq * (val + 6 - 0xbd), div);
}
static int byt_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
int mul, czclk_freq = DIV_ROUND_CLOSEST(dev_priv->czclk_freq, 1000);
mul = vlv_gpu_freq_div(czclk_freq);
if (mul < 0)
return mul;
return DIV_ROUND_CLOSEST(mul * val, czclk_freq) + 0xbd - 6;
}
static int chv_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
int div, czclk_freq = DIV_ROUND_CLOSEST(dev_priv->czclk_freq, 1000);
div = vlv_gpu_freq_div(czclk_freq);
if (div < 0)
return div;
div /= 2;
return DIV_ROUND_CLOSEST(czclk_freq * val, 2 * div) / 2;
}
static int chv_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
int mul, czclk_freq = DIV_ROUND_CLOSEST(dev_priv->czclk_freq, 1000);
mul = vlv_gpu_freq_div(czclk_freq);
if (mul < 0)
return mul;
mul /= 2;
/* CHV needs even values */
return DIV_ROUND_CLOSEST(val * 2 * mul, czclk_freq) * 2;
}
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
if (IS_GEN9(dev_priv->dev))
return DIV_ROUND_CLOSEST(val * GT_FREQUENCY_MULTIPLIER,
GEN9_FREQ_SCALER);
else if (IS_CHERRYVIEW(dev_priv->dev))
return chv_gpu_freq(dev_priv, val);
else if (IS_VALLEYVIEW(dev_priv->dev))
return byt_gpu_freq(dev_priv, val);
else
return val * GT_FREQUENCY_MULTIPLIER;
}
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
if (IS_GEN9(dev_priv->dev))
return DIV_ROUND_CLOSEST(val * GEN9_FREQ_SCALER,
GT_FREQUENCY_MULTIPLIER);
else if (IS_CHERRYVIEW(dev_priv->dev))
return chv_freq_opcode(dev_priv, val);
else if (IS_VALLEYVIEW(dev_priv->dev))
return byt_freq_opcode(dev_priv, val);
else
return DIV_ROUND_CLOSEST(val, GT_FREQUENCY_MULTIPLIER);
}
struct request_boost {
struct work_struct work;
struct drm_i915_gem_request *req;
};
static void __intel_rps_boost_work(struct work_struct *work)
{
struct request_boost *boost = container_of(work, struct request_boost, work);
struct drm_i915_gem_request *req = boost->req;
if (!i915_gem_request_completed(req, true))
gen6_rps_boost(to_i915(req->ring->dev), NULL,
req->emitted_jiffies);
i915_gem_request_unreference__unlocked(req);
kfree(boost);
}
void intel_queue_rps_boost_for_request(struct drm_device *dev,
struct drm_i915_gem_request *req)
{
struct request_boost *boost;
if (req == NULL || INTEL_INFO(dev)->gen < 6)
return;
if (i915_gem_request_completed(req, true))
return;
boost = kmalloc(sizeof(*boost), GFP_ATOMIC);
if (boost == NULL)
return;
i915_gem_request_reference(req);
boost->req = req;
INIT_WORK(&boost->work, __intel_rps_boost_work);
queue_work(to_i915(dev)->wq, &boost->work);
}
void intel_pm_setup(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
mutex_init(&dev_priv->rps.hw_lock);
spin_lock_init(&dev_priv->rps.client_lock);
INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work,
intel_gen6_powersave_work);
INIT_LIST_HEAD(&dev_priv->rps.clients);
INIT_LIST_HEAD(&dev_priv->rps.semaphores.link);
INIT_LIST_HEAD(&dev_priv->rps.mmioflips.link);
dev_priv->pm.suspended = false;
drm/i915: add support for checking if we hold an RPM reference Atm, we assert that the device is not suspended until the point when the device is truly put to a suspended state. This is fine, but we can catch more problems if we check that RPM refcount is non-zero. After that one drops to zero we shouldn't access the device any more, even if the actual device suspend may be delayed. Change assert_rpm_wakelock_held() accordingly to check for a non-zero RPM refcount in addition to the current device-not-suspended check. For the new asserts to work we need to annotate every place explicitly in the code where we expect that the device is powered. The places where we only assume this, but may not hold an RPM reference: - driver load We assume the device to be powered until we enable RPM. Make this explicit by taking an RPM reference around the load function. - system and runtime sudpend/resume handlers These handlers are called when the RPM reference becomes 0 and know the exact point after which the device can get powered off. Disable the RPM-reference-held check for their duration. - the IRQ, hangcheck and RPS work handlers These handlers are flushed in the system/runtime suspend handler before the device is powered off, so it's guaranteed that they won't run while the device is powered off even though they don't hold any RPM reference. Disable the RPM-reference-held check for their duration. In all these cases we still check that the device is not suspended. These explicit annotations also have the positive side effect of documenting our assumptions better. This caught additional WARNs from the atomic modeset path, those should be fixed separately. v2: - remove the redundant HAS_RUNTIME_PM check (moved to patch 1) (Ville) v3: - use a new dedicated RPM wakelock refcount to also catch cases where our own RPM get/put functions were not called (Chris) - assert also that the new RPM wakelock refcount is 0 in the RPM suspend handler (Chris) - change the assert error message to be more meaningful (Chris) - prevent false assert errors and check that the RPM wakelock is 0 in the RPM resume handler too - prevent false assert errors in the hangcheck work too - add a device not suspended assert check to the hangcheck work v4: - rename disable/enable_rpm_asserts to disable/enable_rpm_wakeref_asserts and wakelock_count to wakeref_count - disable the wakeref asserts in the IRQ handlers and RPS work too - update/clarify commit message v5: - mark places we plan to change to use proper RPM refcounting with separate DISABLE/ENABLE_RPM_WAKEREF_ASSERTS aliases (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1450227139-13471-1-git-send-email-imre.deak@intel.com
2015-12-16 07:52:19 +07:00
atomic_set(&dev_priv->pm.wakeref_count, 0);
atomic_set(&dev_priv->pm.atomic_seq, 0);
}