linux_dsm_epyc7002/arch/arm/include/asm/kvm_asm.h

105 lines
4.1 KiB
C
Raw Normal View History

/*
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Author: Christoffer Dall <c.dall@virtualopensystems.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#ifndef __ARM_KVM_ASM_H__
#define __ARM_KVM_ASM_H__
/* 0 is reserved as an invalid value. */
#define c0_MPIDR 1 /* MultiProcessor ID Register */
#define c0_CSSELR 2 /* Cache Size Selection Register */
#define c1_SCTLR 3 /* System Control Register */
#define c1_ACTLR 4 /* Auxiliary Control Register */
#define c1_CPACR 5 /* Coprocessor Access Control */
#define c2_TTBR0 6 /* Translation Table Base Register 0 */
#define c2_TTBR0_high 7 /* TTBR0 top 32 bits */
#define c2_TTBR1 8 /* Translation Table Base Register 1 */
#define c2_TTBR1_high 9 /* TTBR1 top 32 bits */
#define c2_TTBCR 10 /* Translation Table Base Control R. */
#define c3_DACR 11 /* Domain Access Control Register */
#define c5_DFSR 12 /* Data Fault Status Register */
#define c5_IFSR 13 /* Instruction Fault Status Register */
#define c5_ADFSR 14 /* Auxilary Data Fault Status R */
#define c5_AIFSR 15 /* Auxilary Instrunction Fault Status R */
#define c6_DFAR 16 /* Data Fault Address Register */
#define c6_IFAR 17 /* Instruction Fault Address Register */
#define c7_PAR 18 /* Physical Address Register */
#define c7_PAR_high 19 /* PAR top 32 bits */
#define c9_L2CTLR 20 /* Cortex A15/A7 L2 Control Register */
#define c10_PRRR 21 /* Primary Region Remap Register */
#define c10_NMRR 22 /* Normal Memory Remap Register */
#define c12_VBAR 23 /* Vector Base Address Register */
#define c13_CID 24 /* Context ID Register */
#define c13_TID_URW 25 /* Thread ID, User R/W */
#define c13_TID_URO 26 /* Thread ID, User R/O */
#define c13_TID_PRIV 27 /* Thread ID, Privileged */
#define c14_CNTKCTL 28 /* Timer Control Register (PL1) */
#define c10_AMAIR0 29 /* Auxilary Memory Attribute Indirection Reg0 */
#define c10_AMAIR1 30 /* Auxilary Memory Attribute Indirection Reg1 */
#define NR_CP15_REGS 31 /* Number of regs (incl. invalid) */
#define ARM_EXCEPTION_RESET 0
#define ARM_EXCEPTION_UNDEFINED 1
#define ARM_EXCEPTION_SOFTWARE 2
#define ARM_EXCEPTION_PREF_ABORT 3
#define ARM_EXCEPTION_DATA_ABORT 4
#define ARM_EXCEPTION_IRQ 5
#define ARM_EXCEPTION_FIQ 6
#define ARM_EXCEPTION_HVC 7
/*
* The rr_lo_hi macro swaps a pair of registers depending on
* current endianness. It is used in conjunction with ldrd and strd
* instructions that load/store a 64-bit value from/to memory to/from
* a pair of registers which are used with the mrrc and mcrr instructions.
* If used with the ldrd/strd instructions, the a1 parameter is the first
* source/destination register and the a2 parameter is the second
* source/destination register. Note that the ldrd/strd instructions
* already swap the bytes within the words correctly according to the
* endianness setting, but the order of the registers need to be effectively
* swapped when used with the mrrc/mcrr instructions.
*/
#ifdef CONFIG_CPU_ENDIAN_BE8
#define rr_lo_hi(a1, a2) a2, a1
#else
#define rr_lo_hi(a1, a2) a1, a2
#endif
#ifndef __ASSEMBLY__
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 06:28:07 +07:00
struct kvm;
struct kvm_vcpu;
extern char __kvm_hyp_init[];
extern char __kvm_hyp_init_end[];
extern char __kvm_hyp_exit[];
extern char __kvm_hyp_exit_end[];
extern char __kvm_hyp_vector[];
extern char __kvm_hyp_code_start[];
extern char __kvm_hyp_code_end[];
extern void __kvm_flush_vm_context(void);
extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
#endif
#endif /* __ARM_KVM_ASM_H__ */