linux_dsm_epyc7002/kernel/cgroup/cpuset.c

2752 lines
76 KiB
C
Raw Normal View History

/*
* kernel/cpuset.c
*
* Processor and Memory placement constraints for sets of tasks.
*
* Copyright (C) 2003 BULL SA.
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
* Copyright (C) 2004-2007 Silicon Graphics, Inc.
* Copyright (C) 2006 Google, Inc
*
* Portions derived from Patrick Mochel's sysfs code.
* sysfs is Copyright (c) 2001-3 Patrick Mochel
*
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
* 2003-10-10 Written by Simon Derr.
* 2003-10-22 Updates by Stephen Hemminger.
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
* 2004 May-July Rework by Paul Jackson.
* 2006 Rework by Paul Menage to use generic cgroups
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
* 2008 Rework of the scheduler domains and CPU hotplug handling
* by Max Krasnyansky
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of the Linux
* distribution for more details.
*/
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/cpuset.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/kmod.h>
#include <linux/list.h>
[PATCH] cpusets: automatic numa mempolicy rebinding This patch automatically updates a tasks NUMA mempolicy when its cpuset memory placement changes. It does so within the context of the task, without any need to support low level external mempolicy manipulation. If a system is not using cpusets, or if running on a system with just the root (all-encompassing) cpuset, then this remap is a no-op. Only when a task is moved between cpusets, or a cpusets memory placement is changed does the following apply. Otherwise, the main routine below, rebind_policy() is not even called. When mixing cpusets, scheduler affinity, and NUMA mempolicies, the essential role of cpusets is to place jobs (several related tasks) on a set of CPUs and Memory Nodes, the essential role of sched_setaffinity is to manage a jobs processor placement within its allowed cpuset, and the essential role of NUMA mempolicy (mbind, set_mempolicy) is to manage a jobs memory placement within its allowed cpuset. However, CPU affinity and NUMA memory placement are managed within the kernel using absolute system wide numbering, not cpuset relative numbering. This is ok until a job is migrated to a different cpuset, or what's the same, a jobs cpuset is moved to different CPUs and Memory Nodes. Then the CPU affinity and NUMA memory placement of the tasks in the job need to be updated, to preserve their cpuset-relative position. This can be done for CPU affinity using sched_setaffinity() from user code, as one task can modify anothers CPU affinity. This cannot be done from an external task for NUMA memory placement, as that can only be modified in the context of the task using it. However, it easy enough to remap a tasks NUMA mempolicy automatically when a task is migrated, using the existing cpuset mechanism to trigger a refresh of a tasks memory placement after its cpuset has changed. All that is needed is the old and new nodemask, and notice to the task that it needs to rebind its mempolicy. The tasks mems_allowed has the old mask, the tasks cpuset has the new mask, and the existing cpuset_update_current_mems_allowed() mechanism provides the notice. The bitmap/cpumask/nodemask remap operators provide the cpuset relative calculations. This patch leaves open a couple of issues: 1) Updating vma and shmfs/tmpfs/hugetlbfs memory policies: These mempolicies may reference nodes outside of those allowed to the current task by its cpuset. Tasks are migrated as part of jobs, which reside on what might be several cpusets in a subtree. When such a job is migrated, all NUMA memory policy references to nodes within that cpuset subtree should be translated, and references to any nodes outside that subtree should be left untouched. A future patch will provide the cpuset mechanism needed to mark such subtrees. With that patch, we will be able to correctly migrate these other memory policies across a job migration. 2) Updating cpuset, affinity and memory policies in user space: This is harder. Any placement state stored in user space using system-wide numbering will be invalidated across a migration. More work will be required to provide user code with a migration-safe means to manage its cpuset relative placement, while preserving the current API's that pass system wide numbers, not cpuset relative numbers across the kernel-user boundary. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:36 +07:00
#include <linux/mempolicy.h>
#include <linux/mm.h>
#include <linux/memory.h>
#include <linux/export.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/pagemap.h>
#include <linux/proc_fs.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
#include <linux/sched/mm.h>
#include <linux/sched/task.h>
#include <linux/seq_file.h>
#include <linux/security.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/stat.h>
#include <linux/string.h>
#include <linux/time.h>
#include <linux/time64.h>
#include <linux/backing-dev.h>
#include <linux/sort.h>
#include <linux/uaccess.h>
#include <linux/atomic.h>
#include <linux/mutex.h>
#include <linux/cgroup.h>
#include <linux/wait.h>
cpuset: use static key better and convert to new API An important function for cpusets is cpuset_node_allowed(), which optimizes on the fact if there's a single root CPU set, it must be trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the cpusets_enabled_key static key the right way where static keys eliminate branching overhead with jump labels. This patch converts it so that static key is used properly. It's also switched to the new static key API and the checking functions are converted to return bool instead of int. We also provide a new variant __cpuset_zone_allowed() which expects that the static key check was already done and they key was enabled. This is needed for get_page_from_freelist() where we want to also avoid the relatively slower check when ALLOC_CPUSET is not set in alloc_flags. The impact on the page allocator microbenchmark is less than expected but the cleanup in itself is worthwhile. 4.6.0-rc2 4.6.0-rc2 multcheck-v1r20 cpuset-v1r20 Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%) Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%) Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%) Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%) Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%) Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%) Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%) Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%) Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%) Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%) Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%) Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%) Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%) Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%) Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Zefan Li <lizefan@huawei.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:14:30 +07:00
DEFINE_STATIC_KEY_FALSE(cpusets_enabled_key);
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
/* See "Frequency meter" comments, below. */
struct fmeter {
int cnt; /* unprocessed events count */
int val; /* most recent output value */
time64_t time; /* clock (secs) when val computed */
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
spinlock_t lock; /* guards read or write of above */
};
struct cpuset {
struct cgroup_subsys_state css;
unsigned long flags; /* "unsigned long" so bitops work */
/*
* On default hierarchy:
*
* The user-configured masks can only be changed by writing to
* cpuset.cpus and cpuset.mems, and won't be limited by the
* parent masks.
*
* The effective masks is the real masks that apply to the tasks
* in the cpuset. They may be changed if the configured masks are
* changed or hotplug happens.
*
* effective_mask == configured_mask & parent's effective_mask,
* and if it ends up empty, it will inherit the parent's mask.
*
*
* On legacy hierachy:
*
* The user-configured masks are always the same with effective masks.
*/
/* user-configured CPUs and Memory Nodes allow to tasks */
cpumask_var_t cpus_allowed;
nodemask_t mems_allowed;
/* effective CPUs and Memory Nodes allow to tasks */
cpumask_var_t effective_cpus;
nodemask_t effective_mems;
/*
* This is old Memory Nodes tasks took on.
*
* - top_cpuset.old_mems_allowed is initialized to mems_allowed.
* - A new cpuset's old_mems_allowed is initialized when some
* task is moved into it.
* - old_mems_allowed is used in cpuset_migrate_mm() when we change
* cpuset.mems_allowed and have tasks' nodemask updated, and
* then old_mems_allowed is updated to mems_allowed.
*/
nodemask_t old_mems_allowed;
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
struct fmeter fmeter; /* memory_pressure filter */
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
/*
* Tasks are being attached to this cpuset. Used to prevent
* zeroing cpus/mems_allowed between ->can_attach() and ->attach().
*/
int attach_in_progress;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
/* partition number for rebuild_sched_domains() */
int pn;
/* for custom sched domain */
int relax_domain_level;
};
static inline struct cpuset *css_cs(struct cgroup_subsys_state *css)
{
return css ? container_of(css, struct cpuset, css) : NULL;
}
/* Retrieve the cpuset for a task */
static inline struct cpuset *task_cs(struct task_struct *task)
{
cgroup: clean up cgroup_subsys names and initialization cgroup_subsys is a bit messier than it needs to be. * The name of a subsys can be different from its internal identifier defined in cgroup_subsys.h. Most subsystems use the matching name but three - cpu, memory and perf_event - use different ones. * cgroup_subsys_id enums are postfixed with _subsys_id and each cgroup_subsys is postfixed with _subsys. cgroup.h is widely included throughout various subsystems, it doesn't and shouldn't have claim on such generic names which don't have any qualifier indicating that they belong to cgroup. * cgroup_subsys->subsys_id should always equal the matching cgroup_subsys_id enum; however, we require each controller to initialize it and then BUG if they don't match, which is a bit silly. This patch cleans up cgroup_subsys names and initialization by doing the followings. * cgroup_subsys_id enums are now postfixed with _cgrp_id, and each cgroup_subsys with _cgrp_subsys. * With the above, renaming subsys identifiers to match the userland visible names doesn't cause any naming conflicts. All non-matching identifiers are renamed to match the official names. cpu_cgroup -> cpu mem_cgroup -> memory perf -> perf_event * controllers no longer need to initialize ->subsys_id and ->name. They're generated in cgroup core and set automatically during boot. * Redundant cgroup_subsys declarations removed. * While updating BUG_ON()s in cgroup_init_early(), convert them to WARN()s. BUGging that early during boot is stupid - the kernel can't print anything, even through serial console and the trap handler doesn't even link stack frame properly for back-tracing. This patch doesn't introduce any behavior changes. v2: Rebased on top of fe1217c4f3f7 ("net: net_cls: move cgroupfs classid handling into core"). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Ingo Molnar <mingo@redhat.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Thomas Graf <tgraf@suug.ch>
2014-02-08 22:36:58 +07:00
return css_cs(task_css(task, cpuset_cgrp_id));
}
static inline struct cpuset *parent_cs(struct cpuset *cs)
{
return css_cs(cs->css.parent);
}
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask Kernels where MAX_NUMNODES > BITS_PER_LONG may temporarily see an empty nodemask in a tsk's mempolicy if its previous nodemask is remapped onto a new set of allowed cpuset nodes where the two nodemasks, as a result of the remap, are now disjoint. c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") adds get_mems_allowed() to prevent the set of allowed nodes from changing for a thread. This causes any update to a set of allowed nodes to stall until put_mems_allowed() is called. This stall is unncessary, however, if at least one node remains unchanged in the update to the set of allowed nodes. This was addressed by 89e8a244b97e ("cpusets: avoid looping when storing to mems_allowed if one node remains set"), but it's still possible that an empty nodemask may be read from a mempolicy because the old nodemask may be remapped to the new nodemask during rebind. To prevent this, only avoid the stall if there is no mempolicy for the thread being changed. This is a temporary solution until all reads from mempolicy nodemasks can be guaranteed to not be empty without the get_mems_allowed() synchronization. Also moves the check for nodemask intersection inside task_lock() so that tsk->mems_allowed cannot change. This ensures that nothing can set this tsk's mems_allowed out from under us and also protects tsk->mempolicy. Reported-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <paul@paulmenage.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-20 08:11:52 +07:00
#ifdef CONFIG_NUMA
static inline bool task_has_mempolicy(struct task_struct *task)
{
return task->mempolicy;
}
#else
static inline bool task_has_mempolicy(struct task_struct *task)
{
return false;
}
#endif
/* bits in struct cpuset flags field */
typedef enum {
CS_ONLINE,
CS_CPU_EXCLUSIVE,
CS_MEM_EXCLUSIVE,
CS_MEM_HARDWALL,
CS_MEMORY_MIGRATE,
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
CS_SCHED_LOAD_BALANCE,
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
CS_SPREAD_PAGE,
CS_SPREAD_SLAB,
} cpuset_flagbits_t;
/* convenient tests for these bits */
static inline bool is_cpuset_online(const struct cpuset *cs)
{
return test_bit(CS_ONLINE, &cs->flags);
}
static inline int is_cpu_exclusive(const struct cpuset *cs)
{
return test_bit(CS_CPU_EXCLUSIVE, &cs->flags);
}
static inline int is_mem_exclusive(const struct cpuset *cs)
{
return test_bit(CS_MEM_EXCLUSIVE, &cs->flags);
}
static inline int is_mem_hardwall(const struct cpuset *cs)
{
return test_bit(CS_MEM_HARDWALL, &cs->flags);
}
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
static inline int is_sched_load_balance(const struct cpuset *cs)
{
return test_bit(CS_SCHED_LOAD_BALANCE, &cs->flags);
}
static inline int is_memory_migrate(const struct cpuset *cs)
{
return test_bit(CS_MEMORY_MIGRATE, &cs->flags);
}
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
static inline int is_spread_page(const struct cpuset *cs)
{
return test_bit(CS_SPREAD_PAGE, &cs->flags);
}
static inline int is_spread_slab(const struct cpuset *cs)
{
return test_bit(CS_SPREAD_SLAB, &cs->flags);
}
static struct cpuset top_cpuset = {
.flags = ((1 << CS_ONLINE) | (1 << CS_CPU_EXCLUSIVE) |
(1 << CS_MEM_EXCLUSIVE)),
};
/**
* cpuset_for_each_child - traverse online children of a cpuset
* @child_cs: loop cursor pointing to the current child
2013-08-09 07:11:25 +07:00
* @pos_css: used for iteration
* @parent_cs: target cpuset to walk children of
*
* Walk @child_cs through the online children of @parent_cs. Must be used
* with RCU read locked.
*/
2013-08-09 07:11:25 +07:00
#define cpuset_for_each_child(child_cs, pos_css, parent_cs) \
css_for_each_child((pos_css), &(parent_cs)->css) \
if (is_cpuset_online(((child_cs) = css_cs((pos_css)))))
/**
* cpuset_for_each_descendant_pre - pre-order walk of a cpuset's descendants
* @des_cs: loop cursor pointing to the current descendant
2013-08-09 07:11:25 +07:00
* @pos_css: used for iteration
* @root_cs: target cpuset to walk ancestor of
*
* Walk @des_cs through the online descendants of @root_cs. Must be used
2013-08-09 07:11:25 +07:00
* with RCU read locked. The caller may modify @pos_css by calling
cgroup: make css_for_each_descendant() and friends include the origin css in the iteration Previously, all css descendant iterators didn't include the origin (root of subtree) css in the iteration. The reasons were maintaining consistency with css_for_each_child() and that at the time of introduction more use cases needed skipping the origin anyway; however, given that css_is_descendant() considers self to be a descendant, omitting the origin css has become more confusing and looking at the accumulated use cases rather clearly indicates that including origin would result in simpler code overall. While this is a change which can easily lead to subtle bugs, cgroup API including the iterators has recently gone through major restructuring and no out-of-tree changes will be applicable without adjustments making this a relatively acceptable opportunity for this type of change. The conversions are mostly straight-forward. If the iteration block had explicit origin handling before or after, it's moved inside the iteration. If not, if (pos == origin) continue; is added. Some conversions add extra reference get/put around origin handling by consolidating origin handling and the rest. While the extra ref operations aren't strictly necessary, this shouldn't cause any noticeable difference. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com>
2013-08-09 07:11:27 +07:00
* css_rightmost_descendant() to skip subtree. @root_cs is included in the
* iteration and the first node to be visited.
*/
2013-08-09 07:11:25 +07:00
#define cpuset_for_each_descendant_pre(des_cs, pos_css, root_cs) \
css_for_each_descendant_pre((pos_css), &(root_cs)->css) \
if (is_cpuset_online(((des_cs) = css_cs((pos_css)))))
/*
* There are two global locks guarding cpuset structures - cpuset_mutex and
* callback_lock. We also require taking task_lock() when dereferencing a
* task's cpuset pointer. See "The task_lock() exception", at the end of this
* comment.
*
* A task must hold both locks to modify cpusets. If a task holds
* cpuset_mutex, then it blocks others wanting that mutex, ensuring that it
* is the only task able to also acquire callback_lock and be able to
* modify cpusets. It can perform various checks on the cpuset structure
* first, knowing nothing will change. It can also allocate memory while
* just holding cpuset_mutex. While it is performing these checks, various
* callback routines can briefly acquire callback_lock to query cpusets.
* Once it is ready to make the changes, it takes callback_lock, blocking
* everyone else.
[PATCH] cpusets: dual semaphore locking overhaul Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:30 +07:00
*
* Calls to the kernel memory allocator can not be made while holding
* callback_lock, as that would risk double tripping on callback_lock
[PATCH] cpusets: dual semaphore locking overhaul Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:30 +07:00
* from one of the callbacks into the cpuset code from within
* __alloc_pages().
*
* If a task is only holding callback_lock, then it has read-only
[PATCH] cpusets: dual semaphore locking overhaul Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:30 +07:00
* access to cpusets.
*
cpuset,mm: update tasks' mems_allowed in time Fix allocating page cache/slab object on the unallowed node when memory spread is set by updating tasks' mems_allowed after its cpuset's mems is changed. In order to update tasks' mems_allowed in time, we must modify the code of memory policy. Because the memory policy is applied in the process's context originally. After applying this patch, one task directly manipulates anothers mems_allowed, and we use alloc_lock in the task_struct to protect mems_allowed and memory policy of the task. But in the fast path, we didn't use lock to protect them, because adding a lock may lead to performance regression. But if we don't add a lock,the task might see no nodes when changing cpuset's mems_allowed to some non-overlapping set. In order to avoid it, we set all new allowed nodes, then clear newly disallowed ones. [lee.schermerhorn@hp.com: The rework of mpol_new() to extract the adjusting of the node mask to apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind() with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local allocation. Fix this by adding the check for MPOL_PREFERRED and empty node mask to mpol_new_mpolicy(). Remove the now unneeded 'nodes = NULL' from mpol_new(). Note that mpol_new_mempolicy() is always called with a non-NULL 'nodes' parameter now that it has been removed from mpol_new(). Therefore, we don't need to test nodes for NULL before testing it for 'empty'. However, just to be extra paranoid, add a VM_BUG_ON() to verify this assumption.] [lee.schermerhorn@hp.com: I don't think the function name 'mpol_new_mempolicy' is descriptive enough to differentiate it from mpol_new(). This function applies cpuset set context, usually constraining nodes to those allowed by the cpuset. However, when the 'RELATIVE_NODES flag is set, it also translates the nodes. So I settled on 'mpol_set_nodemask()', because the comment block for mpol_new() mentions that we need to call this function to "set nodes". Some additional minor line length, whitespace and typo cleanup.] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Paul Menage <menage@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:31:49 +07:00
* Now, the task_struct fields mems_allowed and mempolicy may be changed
* by other task, we use alloc_lock in the task_struct fields to protect
* them.
[PATCH] cpusets: dual semaphore locking overhaul Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:30 +07:00
*
* The cpuset_common_file_read() handlers only hold callback_lock across
[PATCH] cpusets: dual semaphore locking overhaul Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:30 +07:00
* small pieces of code, such as when reading out possibly multi-word
* cpumasks and nodemasks.
*
* Accessing a task's cpuset should be done in accordance with the
* guidelines for accessing subsystem state in kernel/cgroup.c
*/
static DEFINE_MUTEX(cpuset_mutex);
static DEFINE_SPINLOCK(callback_lock);
[PATCH] cpuset semaphore depth check deadlock fix The cpusets-formalize-intermediate-gfp_kernel-containment patch has a deadlock problem. This patch was part of a set of four patches to make more extensive use of the cpuset 'mem_exclusive' attribute to manage kernel GFP_KERNEL memory allocations and to constrain the out-of-memory (oom) killer. A task that is changing cpusets in particular ways on a system when it is very short of free memory could double trip over the global cpuset_sem semaphore (get the lock and then deadlock trying to get it again). The second attempt to get cpuset_sem would be in the routine cpuset_zone_allowed(). This was discovered by code inspection. I can not reproduce the problem except with an artifically hacked kernel and a specialized stress test. In real life you cannot hit this unless you are manipulating cpusets, and are very unlikely to hit it unless you are rapidly modifying cpusets on a memory tight system. Even then it would be a rare occurence. If you did hit it, the task double tripping over cpuset_sem would deadlock in the kernel, and any other task also trying to manipulate cpusets would deadlock there too, on cpuset_sem. Your batch manager would be wedged solid (if it was cpuset savvy), but classic Unix shells and utilities would work well enough to reboot the system. The unusual condition that led to this bug is that unlike most semaphores, cpuset_sem _can_ be acquired while in the page allocation code, when __alloc_pages() calls cpuset_zone_allowed. So it easy to mistakenly perform the following sequence: 1) task makes system call to alter a cpuset 2) take cpuset_sem 3) try to allocate memory 4) memory allocator, via cpuset_zone_allowed, trys to take cpuset_sem 5) deadlock The reason that this is not a serious bug for most users is that almost all calls to allocate memory don't require taking cpuset_sem. Only some code paths off the beaten track require taking cpuset_sem -- which is good. Taking a global semaphore on the main code path for allocating memory would not scale well. This patch fixes this deadlock by wrapping the up() and down() calls on cpuset_sem in kernel/cpuset.c with code that tracks the nesting depth of the current task on that semaphore, and only does the real down() if the task doesn't hold the lock already, and only does the real up() if the nesting depth (number of unmatched downs) is exactly one. The previous required use of refresh_mems(), anytime that the cpuset_sem semaphore was acquired and the code executed while holding that semaphore might try to allocate memory, is no longer required. Two refresh_mems() calls were removed thanks to this. This is a good change, as failing to get all the necessary refresh_mems() calls placed was a primary source of bugs in this cpuset code. The only remaining call to refresh_mems() is made while doing a memory allocation, if certain task memory placement data needs to be updated from its cpuset, due to the cpuset having been changed behind the tasks back. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 14:26:06 +07:00
static struct workqueue_struct *cpuset_migrate_mm_wq;
cpuset: don't nest cgroup_mutex inside get_online_cpus() CPU / memory hotplug path currently grabs cgroup_mutex from hotplug event notifications. We want to separate cpuset locking from cgroup core and make cgroup_mutex outer to hotplug synchronization so that, among other things, mechanisms which depend on get_online_cpus() can be used from cgroup callbacks. In general, we want to keep cgroup_mutex the outermost lock to minimize locking interactions among different controllers. Convert cpuset_handle_hotplug() to cpuset_hotplug_workfn() and schedule it from the hotplug notifications. As the function can already handle multiple mixed events without any input, converting it to a work function is mostly trivial; however, one complication is that cpuset_update_active_cpus() needs to update sched domains synchronously to reflect an offlined cpu to avoid confusing the scheduler. This is worked around by falling back to the the default single sched domain synchronously before scheduling the actual hotplug work. This makes sched domain rebuilt twice per CPU hotplug event but the operation isn't that heavy and a lot of the second operation would be noop for systems w/ single sched domain, which is the common case. This decouples cpuset hotplug handling from the notification callbacks and there can be an arbitrary delay between the actual event and updates to cpusets. Scheduler and mm can handle it fine but moving tasks out of an empty cpuset may race against writes to the cpuset restoring execution resources which can lead to confusing behavior. Flush hotplug work item from cpuset_write_resmask() to avoid such confusions. v2: Synchronous sched domain rebuilding using the fallback sched domain added. This fixes various issues caused by confused scheduler putting tasks on a dead CPU, including the one reported by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/*
* CPU / memory hotplug is handled asynchronously.
*/
static void cpuset_hotplug_workfn(struct work_struct *work);
static DECLARE_WORK(cpuset_hotplug_work, cpuset_hotplug_workfn);
static DECLARE_WAIT_QUEUE_HEAD(cpuset_attach_wq);
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
/*
* This is ugly, but preserves the userspace API for existing cpuset
* users. If someone tries to mount the "cpuset" filesystem, we
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
* silently switch it to mount "cgroup" instead
*/
static struct dentry *cpuset_mount(struct file_system_type *fs_type,
int flags, const char *unused_dev_name, void *data)
{
struct file_system_type *cgroup_fs = get_fs_type("cgroup");
struct dentry *ret = ERR_PTR(-ENODEV);
if (cgroup_fs) {
char mountopts[] =
"cpuset,noprefix,"
"release_agent=/sbin/cpuset_release_agent";
ret = cgroup_fs->mount(cgroup_fs, flags,
unused_dev_name, mountopts);
put_filesystem(cgroup_fs);
}
return ret;
}
static struct file_system_type cpuset_fs_type = {
.name = "cpuset",
.mount = cpuset_mount,
};
/*
* Return in pmask the portion of a cpusets's cpus_allowed that
* are online. If none are online, walk up the cpuset hierarchy
cpuset: handle race between CPU hotplug and cpuset_hotplug_work A discrepancy between cpu_online_mask and cpuset's effective_cpus mask is inevitable during hotplug since cpuset defers updating of effective_cpus mask using a workqueue, during which time nothing prevents the system from more hotplug operations. For that reason guarantee_online_cpus() walks up the cpuset hierarchy until it finds an intersection under the assumption that top cpuset's effective_cpus mask intersects with cpu_online_mask even with such a race occurring. However a sequence of CPU hotplugs can open a time window, during which none of the effective CPUs in the top cpuset intersect with cpu_online_mask. For example when there are 4 possible CPUs 0-3 and only CPU0 is online: ======================== =========================== cpu_online_mask top_cpuset.effective_cpus ======================== =========================== echo 1 > cpu2/online. CPU hotplug notifier woke up hotplug work but not yet scheduled. [0,2] [0] echo 0 > cpu0/online. The workqueue is still runnable. [2] [0] ======================== =========================== Now there is no intersection between cpu_online_mask and top_cpuset.effective_cpus. Thus invoking sys_sched_setaffinity() at this moment can cause following: Unable to handle kernel NULL pointer dereference at virtual address 000000d0 ------------[ cut here ]------------ Kernel BUG at ffffffc0001389b0 [verbose debug info unavailable] Internal error: Oops - BUG: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1420 Comm: taskset Tainted: G W 4.4.8+ #98 task: ffffffc06a5c4880 ti: ffffffc06e124000 task.ti: ffffffc06e124000 PC is at guarantee_online_cpus+0x2c/0x58 LR is at cpuset_cpus_allowed+0x4c/0x6c <snip> Process taskset (pid: 1420, stack limit = 0xffffffc06e124020) Call trace: [<ffffffc0001389b0>] guarantee_online_cpus+0x2c/0x58 [<ffffffc00013b208>] cpuset_cpus_allowed+0x4c/0x6c [<ffffffc0000d61f0>] sched_setaffinity+0xc0/0x1ac [<ffffffc0000d6374>] SyS_sched_setaffinity+0x98/0xac [<ffffffc000085cb0>] el0_svc_naked+0x24/0x28 The top cpuset's effective_cpus are guaranteed to be identical to cpu_online_mask eventually. Hence fall back to cpu_online_mask when there is no intersection between top cpuset's effective_cpus and cpu_online_mask. Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: cgroups@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-12 11:14:58 +07:00
* until we find one that does have some online cpus.
*
* One way or another, we guarantee to return some non-empty subset
* of cpu_online_mask.
*
* Call with callback_lock or cpuset_mutex held.
*/
static void guarantee_online_cpus(struct cpuset *cs, struct cpumask *pmask)
{
cpuset: handle race between CPU hotplug and cpuset_hotplug_work A discrepancy between cpu_online_mask and cpuset's effective_cpus mask is inevitable during hotplug since cpuset defers updating of effective_cpus mask using a workqueue, during which time nothing prevents the system from more hotplug operations. For that reason guarantee_online_cpus() walks up the cpuset hierarchy until it finds an intersection under the assumption that top cpuset's effective_cpus mask intersects with cpu_online_mask even with such a race occurring. However a sequence of CPU hotplugs can open a time window, during which none of the effective CPUs in the top cpuset intersect with cpu_online_mask. For example when there are 4 possible CPUs 0-3 and only CPU0 is online: ======================== =========================== cpu_online_mask top_cpuset.effective_cpus ======================== =========================== echo 1 > cpu2/online. CPU hotplug notifier woke up hotplug work but not yet scheduled. [0,2] [0] echo 0 > cpu0/online. The workqueue is still runnable. [2] [0] ======================== =========================== Now there is no intersection between cpu_online_mask and top_cpuset.effective_cpus. Thus invoking sys_sched_setaffinity() at this moment can cause following: Unable to handle kernel NULL pointer dereference at virtual address 000000d0 ------------[ cut here ]------------ Kernel BUG at ffffffc0001389b0 [verbose debug info unavailable] Internal error: Oops - BUG: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1420 Comm: taskset Tainted: G W 4.4.8+ #98 task: ffffffc06a5c4880 ti: ffffffc06e124000 task.ti: ffffffc06e124000 PC is at guarantee_online_cpus+0x2c/0x58 LR is at cpuset_cpus_allowed+0x4c/0x6c <snip> Process taskset (pid: 1420, stack limit = 0xffffffc06e124020) Call trace: [<ffffffc0001389b0>] guarantee_online_cpus+0x2c/0x58 [<ffffffc00013b208>] cpuset_cpus_allowed+0x4c/0x6c [<ffffffc0000d61f0>] sched_setaffinity+0xc0/0x1ac [<ffffffc0000d6374>] SyS_sched_setaffinity+0x98/0xac [<ffffffc000085cb0>] el0_svc_naked+0x24/0x28 The top cpuset's effective_cpus are guaranteed to be identical to cpu_online_mask eventually. Hence fall back to cpu_online_mask when there is no intersection between top cpuset's effective_cpus and cpu_online_mask. Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: cgroups@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-12 11:14:58 +07:00
while (!cpumask_intersects(cs->effective_cpus, cpu_online_mask)) {
cs = parent_cs(cs);
cpuset: handle race between CPU hotplug and cpuset_hotplug_work A discrepancy between cpu_online_mask and cpuset's effective_cpus mask is inevitable during hotplug since cpuset defers updating of effective_cpus mask using a workqueue, during which time nothing prevents the system from more hotplug operations. For that reason guarantee_online_cpus() walks up the cpuset hierarchy until it finds an intersection under the assumption that top cpuset's effective_cpus mask intersects with cpu_online_mask even with such a race occurring. However a sequence of CPU hotplugs can open a time window, during which none of the effective CPUs in the top cpuset intersect with cpu_online_mask. For example when there are 4 possible CPUs 0-3 and only CPU0 is online: ======================== =========================== cpu_online_mask top_cpuset.effective_cpus ======================== =========================== echo 1 > cpu2/online. CPU hotplug notifier woke up hotplug work but not yet scheduled. [0,2] [0] echo 0 > cpu0/online. The workqueue is still runnable. [2] [0] ======================== =========================== Now there is no intersection between cpu_online_mask and top_cpuset.effective_cpus. Thus invoking sys_sched_setaffinity() at this moment can cause following: Unable to handle kernel NULL pointer dereference at virtual address 000000d0 ------------[ cut here ]------------ Kernel BUG at ffffffc0001389b0 [verbose debug info unavailable] Internal error: Oops - BUG: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1420 Comm: taskset Tainted: G W 4.4.8+ #98 task: ffffffc06a5c4880 ti: ffffffc06e124000 task.ti: ffffffc06e124000 PC is at guarantee_online_cpus+0x2c/0x58 LR is at cpuset_cpus_allowed+0x4c/0x6c <snip> Process taskset (pid: 1420, stack limit = 0xffffffc06e124020) Call trace: [<ffffffc0001389b0>] guarantee_online_cpus+0x2c/0x58 [<ffffffc00013b208>] cpuset_cpus_allowed+0x4c/0x6c [<ffffffc0000d61f0>] sched_setaffinity+0xc0/0x1ac [<ffffffc0000d6374>] SyS_sched_setaffinity+0x98/0xac [<ffffffc000085cb0>] el0_svc_naked+0x24/0x28 The top cpuset's effective_cpus are guaranteed to be identical to cpu_online_mask eventually. Hence fall back to cpu_online_mask when there is no intersection between top cpuset's effective_cpus and cpu_online_mask. Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: cgroups@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-12 11:14:58 +07:00
if (unlikely(!cs)) {
/*
* The top cpuset doesn't have any online cpu as a
* consequence of a race between cpuset_hotplug_work
* and cpu hotplug notifier. But we know the top
* cpuset's effective_cpus is on its way to to be
* identical to cpu_online_mask.
*/
cpumask_copy(pmask, cpu_online_mask);
return;
}
}
cpumask_and(pmask, cs->effective_cpus, cpu_online_mask);
}
/*
* Return in *pmask the portion of a cpusets's mems_allowed that
* are online, with memory. If none are online with memory, walk
* up the cpuset hierarchy until we find one that does have some
* online mems. The top cpuset always has some mems online.
*
* One way or another, we guarantee to return some non-empty subset
* of node_states[N_MEMORY].
*
* Call with callback_lock or cpuset_mutex held.
*/
static void guarantee_online_mems(struct cpuset *cs, nodemask_t *pmask)
{
while (!nodes_intersects(cs->effective_mems, node_states[N_MEMORY]))
cs = parent_cs(cs);
nodes_and(*pmask, cs->effective_mems, node_states[N_MEMORY]);
}
/*
* update task's spread flag if cpuset's page/slab spread flag is set
*
* Call with callback_lock or cpuset_mutex held.
*/
static void cpuset_update_task_spread_flag(struct cpuset *cs,
struct task_struct *tsk)
{
if (is_spread_page(cs))
task_set_spread_page(tsk);
else
task_clear_spread_page(tsk);
if (is_spread_slab(cs))
task_set_spread_slab(tsk);
else
task_clear_spread_slab(tsk);
}
/*
* is_cpuset_subset(p, q) - Is cpuset p a subset of cpuset q?
*
* One cpuset is a subset of another if all its allowed CPUs and
* Memory Nodes are a subset of the other, and its exclusive flags
* are only set if the other's are set. Call holding cpuset_mutex.
*/
static int is_cpuset_subset(const struct cpuset *p, const struct cpuset *q)
{
return cpumask_subset(p->cpus_allowed, q->cpus_allowed) &&
nodes_subset(p->mems_allowed, q->mems_allowed) &&
is_cpu_exclusive(p) <= is_cpu_exclusive(q) &&
is_mem_exclusive(p) <= is_mem_exclusive(q);
}
/**
* alloc_trial_cpuset - allocate a trial cpuset
* @cs: the cpuset that the trial cpuset duplicates
*/
static struct cpuset *alloc_trial_cpuset(struct cpuset *cs)
{
struct cpuset *trial;
trial = kmemdup(cs, sizeof(*cs), GFP_KERNEL);
if (!trial)
return NULL;
if (!alloc_cpumask_var(&trial->cpus_allowed, GFP_KERNEL))
goto free_cs;
if (!alloc_cpumask_var(&trial->effective_cpus, GFP_KERNEL))
goto free_cpus;
cpumask_copy(trial->cpus_allowed, cs->cpus_allowed);
cpumask_copy(trial->effective_cpus, cs->effective_cpus);
return trial;
free_cpus:
free_cpumask_var(trial->cpus_allowed);
free_cs:
kfree(trial);
return NULL;
}
/**
* free_trial_cpuset - free the trial cpuset
* @trial: the trial cpuset to be freed
*/
static void free_trial_cpuset(struct cpuset *trial)
{
free_cpumask_var(trial->effective_cpus);
free_cpumask_var(trial->cpus_allowed);
kfree(trial);
}
/*
* validate_change() - Used to validate that any proposed cpuset change
* follows the structural rules for cpusets.
*
* If we replaced the flag and mask values of the current cpuset
* (cur) with those values in the trial cpuset (trial), would
* our various subset and exclusive rules still be valid? Presumes
* cpuset_mutex held.
*
* 'cur' is the address of an actual, in-use cpuset. Operations
* such as list traversal that depend on the actual address of the
* cpuset in the list must use cur below, not trial.
*
* 'trial' is the address of bulk structure copy of cur, with
* perhaps one or more of the fields cpus_allowed, mems_allowed,
* or flags changed to new, trial values.
*
* Return 0 if valid, -errno if not.
*/
static int validate_change(struct cpuset *cur, struct cpuset *trial)
{
2013-08-09 07:11:25 +07:00
struct cgroup_subsys_state *css;
struct cpuset *c, *par;
int ret;
rcu_read_lock();
/* Each of our child cpusets must be a subset of us */
ret = -EBUSY;
2013-08-09 07:11:25 +07:00
cpuset_for_each_child(c, css, cur)
if (!is_cpuset_subset(c, trial))
goto out;
/* Remaining checks don't apply to root cpuset */
ret = 0;
if (cur == &top_cpuset)
goto out;
par = parent_cs(cur);
/* On legacy hiearchy, we must be a subset of our parent cpuset. */
ret = -EACCES;
if (!cgroup_subsys_on_dfl(cpuset_cgrp_subsys) &&
!is_cpuset_subset(trial, par))
goto out;
/*
* If either I or some sibling (!= me) is exclusive, we can't
* overlap
*/
ret = -EINVAL;
2013-08-09 07:11:25 +07:00
cpuset_for_each_child(c, css, par) {
if ((is_cpu_exclusive(trial) || is_cpu_exclusive(c)) &&
c != cur &&
cpumask_intersects(trial->cpus_allowed, c->cpus_allowed))
goto out;
if ((is_mem_exclusive(trial) || is_mem_exclusive(c)) &&
c != cur &&
nodes_intersects(trial->mems_allowed, c->mems_allowed))
goto out;
}
/*
* Cpusets with tasks - existing or newly being attached - can't
* be changed to have empty cpus_allowed or mems_allowed.
*/
ret = -ENOSPC;
if ((cgroup_is_populated(cur->css.cgroup) || cur->attach_in_progress)) {
if (!cpumask_empty(cur->cpus_allowed) &&
cpumask_empty(trial->cpus_allowed))
goto out;
if (!nodes_empty(cur->mems_allowed) &&
nodes_empty(trial->mems_allowed))
goto out;
}
/*
* We can't shrink if we won't have enough room for SCHED_DEADLINE
* tasks.
*/
ret = -EBUSY;
if (is_cpu_exclusive(cur) &&
!cpuset_cpumask_can_shrink(cur->cpus_allowed,
trial->cpus_allowed))
goto out;
ret = 0;
out:
rcu_read_unlock();
return ret;
}
#ifdef CONFIG_SMP
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
/*
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
* Helper routine for generate_sched_domains().
* Do cpusets a, b have overlapping effective cpus_allowed masks?
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
*/
static int cpusets_overlap(struct cpuset *a, struct cpuset *b)
{
return cpumask_intersects(a->effective_cpus, b->effective_cpus);
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
}
static void
update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
{
if (dattr->relax_domain_level < c->relax_domain_level)
dattr->relax_domain_level = c->relax_domain_level;
return;
}
static void update_domain_attr_tree(struct sched_domain_attr *dattr,
struct cpuset *root_cs)
{
struct cpuset *cp;
2013-08-09 07:11:25 +07:00
struct cgroup_subsys_state *pos_css;
rcu_read_lock();
2013-08-09 07:11:25 +07:00
cpuset_for_each_descendant_pre(cp, pos_css, root_cs) {
/* skip the whole subtree if @cp doesn't have any CPU */
if (cpumask_empty(cp->cpus_allowed)) {
2013-08-09 07:11:25 +07:00
pos_css = css_rightmost_descendant(pos_css);
continue;
}
if (is_sched_load_balance(cp))
update_domain_attr(dattr, cp);
}
rcu_read_unlock();
}
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
/*
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
* generate_sched_domains()
*
* This function builds a partial partition of the systems CPUs
* A 'partial partition' is a set of non-overlapping subsets whose
* union is a subset of that set.
* The output of this function needs to be passed to kernel/sched/core.c
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
* partition_sched_domains() routine, which will rebuild the scheduler's
* load balancing domains (sched domains) as specified by that partial
* partition.
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
*
* See "What is sched_load_balance" in Documentation/cgroups/cpusets.txt
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
* for a background explanation of this.
*
* Does not return errors, on the theory that the callers of this
* routine would rather not worry about failures to rebuild sched
* domains when operating in the severe memory shortage situations
* that could cause allocation failures below.
*
* Must be called with cpuset_mutex held.
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
*
* The three key local variables below are:
* q - a linked-list queue of cpuset pointers, used to implement a
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
* top-down scan of all cpusets. This scan loads a pointer
* to each cpuset marked is_sched_load_balance into the
* array 'csa'. For our purposes, rebuilding the schedulers
* sched domains, we can ignore !is_sched_load_balance cpusets.
* csa - (for CpuSet Array) Array of pointers to all the cpusets
* that need to be load balanced, for convenient iterative
* access by the subsequent code that finds the best partition,
* i.e the set of domains (subsets) of CPUs such that the
* cpus_allowed of every cpuset marked is_sched_load_balance
* is a subset of one of these domains, while there are as
* many such domains as possible, each as small as possible.
* doms - Conversion of 'csa' to an array of cpumasks, for passing to
* the kernel/sched/core.c routine partition_sched_domains() in a
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
* convenient format, that can be easily compared to the prior
* value to determine what partition elements (sched domains)
* were changed (added or removed.)
*
* Finding the best partition (set of domains):
* The triple nested loops below over i, j, k scan over the
* load balanced cpusets (using the array of cpuset pointers in
* csa[]) looking for pairs of cpusets that have overlapping
* cpus_allowed, but which don't have the same 'pn' partition
* number and gives them in the same partition number. It keeps
* looping on the 'restart' label until it can no longer find
* any such pairs.
*
* The union of the cpus_allowed masks from the set of
* all cpusets having the same 'pn' value then form the one
* element of the partition (one sched domain) to be passed to
* partition_sched_domains().
*/
static int generate_sched_domains(cpumask_var_t **domains,
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
struct sched_domain_attr **attributes)
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
{
struct cpuset *cp; /* scans q */
struct cpuset **csa; /* array of all cpuset ptrs */
int csn; /* how many cpuset ptrs in csa so far */
int i, j, k; /* indices for partition finding loops */
cpumask_var_t *doms; /* resulting partition; i.e. sched domains */
cpumask_var_t non_isolated_cpus; /* load balanced CPUs */
struct sched_domain_attr *dattr; /* attributes for custom domains */
int ndoms = 0; /* number of sched domains in result */
int nslot; /* next empty doms[] struct cpumask slot */
2013-08-09 07:11:25 +07:00
struct cgroup_subsys_state *pos_css;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
doms = NULL;
dattr = NULL;
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
csa = NULL;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
if (!alloc_cpumask_var(&non_isolated_cpus, GFP_KERNEL))
goto done;
cpumask_andnot(non_isolated_cpus, cpu_possible_mask, cpu_isolated_map);
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
/* Special case for the 99% of systems with one, full, sched domain */
if (is_sched_load_balance(&top_cpuset)) {
ndoms = 1;
doms = alloc_sched_domains(ndoms);
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
if (!doms)
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
goto done;
dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL);
if (dattr) {
*dattr = SD_ATTR_INIT;
update_domain_attr_tree(dattr, &top_cpuset);
}
cpumask_and(doms[0], top_cpuset.effective_cpus,
non_isolated_cpus);
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
goto done;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
}
csa = kmalloc(nr_cpusets() * sizeof(cp), GFP_KERNEL);
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
if (!csa)
goto done;
csn = 0;
rcu_read_lock();
2013-08-09 07:11:25 +07:00
cpuset_for_each_descendant_pre(cp, pos_css, &top_cpuset) {
cgroup: make css_for_each_descendant() and friends include the origin css in the iteration Previously, all css descendant iterators didn't include the origin (root of subtree) css in the iteration. The reasons were maintaining consistency with css_for_each_child() and that at the time of introduction more use cases needed skipping the origin anyway; however, given that css_is_descendant() considers self to be a descendant, omitting the origin css has become more confusing and looking at the accumulated use cases rather clearly indicates that including origin would result in simpler code overall. While this is a change which can easily lead to subtle bugs, cgroup API including the iterators has recently gone through major restructuring and no out-of-tree changes will be applicable without adjustments making this a relatively acceptable opportunity for this type of change. The conversions are mostly straight-forward. If the iteration block had explicit origin handling before or after, it's moved inside the iteration. If not, if (pos == origin) continue; is added. Some conversions add extra reference get/put around origin handling by consolidating origin handling and the rest. While the extra ref operations aren't strictly necessary, this shouldn't cause any noticeable difference. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com>
2013-08-09 07:11:27 +07:00
if (cp == &top_cpuset)
continue;
/*
* Continue traversing beyond @cp iff @cp has some CPUs and
* isn't load balancing. The former is obvious. The
* latter: All child cpusets contain a subset of the
* parent's cpus, so just skip them, and then we call
* update_domain_attr_tree() to calc relax_domain_level of
* the corresponding sched domain.
*/
if (!cpumask_empty(cp->cpus_allowed) &&
!(is_sched_load_balance(cp) &&
cpumask_intersects(cp->cpus_allowed, non_isolated_cpus)))
continue;
if (is_sched_load_balance(cp))
csa[csn++] = cp;
/* skip @cp's subtree */
2013-08-09 07:11:25 +07:00
pos_css = css_rightmost_descendant(pos_css);
}
rcu_read_unlock();
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
for (i = 0; i < csn; i++)
csa[i]->pn = i;
ndoms = csn;
restart:
/* Find the best partition (set of sched domains) */
for (i = 0; i < csn; i++) {
struct cpuset *a = csa[i];
int apn = a->pn;
for (j = 0; j < csn; j++) {
struct cpuset *b = csa[j];
int bpn = b->pn;
if (apn != bpn && cpusets_overlap(a, b)) {
for (k = 0; k < csn; k++) {
struct cpuset *c = csa[k];
if (c->pn == bpn)
c->pn = apn;
}
ndoms--; /* one less element */
goto restart;
}
}
}
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
/*
* Now we know how many domains to create.
* Convert <csn, csa> to <ndoms, doms> and populate cpu masks.
*/
doms = alloc_sched_domains(ndoms);
if (!doms)
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
goto done;
/*
* The rest of the code, including the scheduler, can deal with
* dattr==NULL case. No need to abort if alloc fails.
*/
dattr = kmalloc(ndoms * sizeof(struct sched_domain_attr), GFP_KERNEL);
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
for (nslot = 0, i = 0; i < csn; i++) {
struct cpuset *a = csa[i];
struct cpumask *dp;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
int apn = a->pn;
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
if (apn < 0) {
/* Skip completed partitions */
continue;
}
dp = doms[nslot];
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
if (nslot == ndoms) {
static int warnings = 10;
if (warnings) {
pr_warn("rebuild_sched_domains confused: nslot %d, ndoms %d, csn %d, i %d, apn %d\n",
nslot, ndoms, csn, i, apn);
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
warnings--;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
}
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
continue;
}
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
cpumask_clear(dp);
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
if (dattr)
*(dattr + nslot) = SD_ATTR_INIT;
for (j = i; j < csn; j++) {
struct cpuset *b = csa[j];
if (apn == b->pn) {
cpumask_or(dp, dp, b->effective_cpus);
cpumask_and(dp, dp, non_isolated_cpus);
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
if (dattr)
update_domain_attr_tree(dattr + nslot, b);
/* Done with this partition */
b->pn = -1;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
}
}
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
nslot++;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
}
BUG_ON(nslot != ndoms);
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
done:
free_cpumask_var(non_isolated_cpus);
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
kfree(csa);
/*
* Fallback to the default domain if kmalloc() failed.
* See comments in partition_sched_domains().
*/
if (doms == NULL)
ndoms = 1;
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
*domains = doms;
*attributes = dattr;
return ndoms;
}
/*
* Rebuild scheduler domains.
*
* If the flag 'sched_load_balance' of any cpuset with non-empty
* 'cpus' changes, or if the 'cpus' allowed changes in any cpuset
* which has that flag enabled, or if any cpuset with a non-empty
* 'cpus' is removed, then call this routine to rebuild the
* scheduler's dynamic sched domains.
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
*
* Call with cpuset_mutex held. Takes get_online_cpus().
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
*/
static void rebuild_sched_domains_locked(void)
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
{
struct sched_domain_attr *attr;
cpumask_var_t *doms;
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
int ndoms;
lockdep_assert_held(&cpuset_mutex);
get_online_cpus();
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
/*
* We have raced with CPU hotplug. Don't do anything to avoid
* passing doms with offlined cpu to partition_sched_domains().
* Anyways, hotplug work item will rebuild sched domains.
*/
if (!cpumask_equal(top_cpuset.effective_cpus, cpu_active_mask))
goto out;
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
/* Generate domain masks and attrs */
ndoms = generate_sched_domains(&doms, &attr);
/* Have scheduler rebuild the domains */
partition_sched_domains(ndoms, doms, attr);
out:
put_online_cpus();
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
}
#else /* !CONFIG_SMP */
static void rebuild_sched_domains_locked(void)
{
}
#endif /* CONFIG_SMP */
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
void rebuild_sched_domains(void)
{
mutex_lock(&cpuset_mutex);
rebuild_sched_domains_locked();
mutex_unlock(&cpuset_mutex);
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
}
/**
* update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
* @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
*
* Iterate through each task of @cs updating its cpus_allowed to the
* effective cpuset's. As this function is called with cpuset_mutex held,
* cpuset membership stays stable.
*/
static void update_tasks_cpumask(struct cpuset *cs)
{
struct css_task_iter it;
struct task_struct *task;
css_task_iter_start(&cs->css, &it);
while ((task = css_task_iter_next(&it)))
set_cpus_allowed_ptr(task, cs->effective_cpus);
css_task_iter_end(&it);
}
/*
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
* update_cpumasks_hier - Update effective cpumasks and tasks in the subtree
* @cs: the cpuset to consider
* @new_cpus: temp variable for calculating new effective_cpus
*
* When congifured cpumask is changed, the effective cpumasks of this cpuset
* and all its descendants need to be updated.
*
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
* On legacy hierachy, effective_cpus will be the same with cpu_allowed.
*
* Called with cpuset_mutex held
*/
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
static void update_cpumasks_hier(struct cpuset *cs, struct cpumask *new_cpus)
{
struct cpuset *cp;
2013-08-09 07:11:25 +07:00
struct cgroup_subsys_state *pos_css;
bool need_rebuild_sched_domains = false;
rcu_read_lock();
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
cpuset_for_each_descendant_pre(cp, pos_css, cs) {
struct cpuset *parent = parent_cs(cp);
cpumask_and(new_cpus, cp->cpus_allowed, parent->effective_cpus);
/*
* If it becomes empty, inherit the effective mask of the
* parent, which is guaranteed to have some CPUs.
*/
if (cgroup_subsys_on_dfl(cpuset_cgrp_subsys) &&
cpumask_empty(new_cpus))
cpumask_copy(new_cpus, parent->effective_cpus);
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
/* Skip the whole subtree if the cpumask remains the same. */
if (cpumask_equal(new_cpus, cp->effective_cpus)) {
pos_css = css_rightmost_descendant(pos_css);
continue;
}
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
if (!css_tryget_online(&cp->css))
continue;
rcu_read_unlock();
spin_lock_irq(&callback_lock);
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
cpumask_copy(cp->effective_cpus, new_cpus);
spin_unlock_irq(&callback_lock);
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
WARN_ON(!cgroup_subsys_on_dfl(cpuset_cgrp_subsys) &&
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
!cpumask_equal(cp->cpus_allowed, cp->effective_cpus));
update_tasks_cpumask(cp);
/*
* If the effective cpumask of any non-empty cpuset is changed,
* we need to rebuild sched domains.
*/
if (!cpumask_empty(cp->cpus_allowed) &&
is_sched_load_balance(cp))
need_rebuild_sched_domains = true;
rcu_read_lock();
css_put(&cp->css);
}
rcu_read_unlock();
if (need_rebuild_sched_domains)
rebuild_sched_domains_locked();
}
/**
* update_cpumask - update the cpus_allowed mask of a cpuset and all tasks in it
* @cs: the cpuset to consider
* @trialcs: trial cpuset
* @buf: buffer of cpu numbers written to this cpuset
*/
static int update_cpumask(struct cpuset *cs, struct cpuset *trialcs,
const char *buf)
{
int retval;
/* top_cpuset.cpus_allowed tracks cpu_online_mask; it's read-only */
if (cs == &top_cpuset)
return -EACCES;
/*
hotplug cpu: move tasks in empty cpusets to parent various other fixes Various minor formatting and comment tweaks to Cliff Wickman's [PATCH_3_of_3]_cpusets__update_cpumask_revision.patch I had had "iff", meaning "if and only if" in a comment. However, except for ancient mathematicians, the abbreviation "iff" was a tad too cryptic. Cliff changed it to "if", presumably figuring that the "iff" was a typo. However, it was the "only if" half of the conjunction that was most interesting. Reword to emphasis the "only if" aspect. The locking comment for remove_tasks_in_empty_cpuset() was wrong; it said callback_mutex had to be held on entry. The opposite is true. Several mentions of attach_task() in comments needed to be changed to cgroup_attach_task(). A comment about notify_on_release was no longer relevant, as the line of code it had commented, namely: set_bit(CS_RELEASED_RESOURCE, &parent->flags); is no longer present in that place in the cpuset.c code. Similarly a comment about notify_on_release before the scan_for_empty_cpusets() routine was no longer relevant. Removed extra parentheses and unnecessary return statement. Renamed attach_task() to cpuset_attach() in various comments. Removed comment about not needing memory migration, as it seems the migration is done anyway, via the cpuset_attach() callback from cgroup_attach_task(). Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Cliff Wickman <cpw@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 15:14:46 +07:00
* An empty cpus_allowed is ok only if the cpuset has no tasks.
* Since cpulist_parse() fails on an empty mask, we special case
* that parsing. The validate_change() call ensures that cpusets
* with tasks have cpus.
*/
if (!*buf) {
cpumask_clear(trialcs->cpus_allowed);
} else {
retval = cpulist_parse(buf, trialcs->cpus_allowed);
if (retval < 0)
return retval;
if (!cpumask_subset(trialcs->cpus_allowed,
top_cpuset.cpus_allowed))
return -EINVAL;
}
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
/* Nothing to do if the cpus didn't change */
if (cpumask_equal(cs->cpus_allowed, trialcs->cpus_allowed))
return 0;
retval = validate_change(cs, trialcs);
if (retval < 0)
return retval;
spin_lock_irq(&callback_lock);
cpumask_copy(cs->cpus_allowed, trialcs->cpus_allowed);
spin_unlock_irq(&callback_lock);
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
/* use trialcs->cpus_allowed as a temp variable */
update_cpumasks_hier(cs, trialcs->cpus_allowed);
return 0;
}
/*
* Migrate memory region from one set of nodes to another. This is
* performed asynchronously as it can be called from process migration path
* holding locks involved in process management. All mm migrations are
* performed in the queued order and can be waited for by flushing
* cpuset_migrate_mm_wq.
*/
struct cpuset_migrate_mm_work {
struct work_struct work;
struct mm_struct *mm;
nodemask_t from;
nodemask_t to;
};
static void cpuset_migrate_mm_workfn(struct work_struct *work)
{
struct cpuset_migrate_mm_work *mwork =
container_of(work, struct cpuset_migrate_mm_work, work);
/* on a wq worker, no need to worry about %current's mems_allowed */
do_migrate_pages(mwork->mm, &mwork->from, &mwork->to, MPOL_MF_MOVE_ALL);
mmput(mwork->mm);
kfree(mwork);
}
static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
const nodemask_t *to)
{
struct cpuset_migrate_mm_work *mwork;
mwork = kzalloc(sizeof(*mwork), GFP_KERNEL);
if (mwork) {
mwork->mm = mm;
mwork->from = *from;
mwork->to = *to;
INIT_WORK(&mwork->work, cpuset_migrate_mm_workfn);
queue_work(cpuset_migrate_mm_wq, &mwork->work);
} else {
mmput(mm);
}
}
static void cpuset_post_attach(void)
{
flush_workqueue(cpuset_migrate_mm_wq);
}
/*
cpuset,mm: update tasks' mems_allowed in time Fix allocating page cache/slab object on the unallowed node when memory spread is set by updating tasks' mems_allowed after its cpuset's mems is changed. In order to update tasks' mems_allowed in time, we must modify the code of memory policy. Because the memory policy is applied in the process's context originally. After applying this patch, one task directly manipulates anothers mems_allowed, and we use alloc_lock in the task_struct to protect mems_allowed and memory policy of the task. But in the fast path, we didn't use lock to protect them, because adding a lock may lead to performance regression. But if we don't add a lock,the task might see no nodes when changing cpuset's mems_allowed to some non-overlapping set. In order to avoid it, we set all new allowed nodes, then clear newly disallowed ones. [lee.schermerhorn@hp.com: The rework of mpol_new() to extract the adjusting of the node mask to apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind() with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local allocation. Fix this by adding the check for MPOL_PREFERRED and empty node mask to mpol_new_mpolicy(). Remove the now unneeded 'nodes = NULL' from mpol_new(). Note that mpol_new_mempolicy() is always called with a non-NULL 'nodes' parameter now that it has been removed from mpol_new(). Therefore, we don't need to test nodes for NULL before testing it for 'empty'. However, just to be extra paranoid, add a VM_BUG_ON() to verify this assumption.] [lee.schermerhorn@hp.com: I don't think the function name 'mpol_new_mempolicy' is descriptive enough to differentiate it from mpol_new(). This function applies cpuset set context, usually constraining nodes to those allowed by the cpuset. However, when the 'RELATIVE_NODES flag is set, it also translates the nodes. So I settled on 'mpol_set_nodemask()', because the comment block for mpol_new() mentions that we need to call this function to "set nodes". Some additional minor line length, whitespace and typo cleanup.] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Paul Menage <menage@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:31:49 +07:00
* cpuset_change_task_nodemask - change task's mems_allowed and mempolicy
* @tsk: the task to change
* @newmems: new nodes that the task will be set
*
* In order to avoid seeing no nodes if the old and new nodes are disjoint,
* we structure updates as setting all new allowed nodes, then clearing newly
* disallowed ones.
*/
static void cpuset_change_task_nodemask(struct task_struct *tsk,
nodemask_t *newmems)
{
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask Kernels where MAX_NUMNODES > BITS_PER_LONG may temporarily see an empty nodemask in a tsk's mempolicy if its previous nodemask is remapped onto a new set of allowed cpuset nodes where the two nodemasks, as a result of the remap, are now disjoint. c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") adds get_mems_allowed() to prevent the set of allowed nodes from changing for a thread. This causes any update to a set of allowed nodes to stall until put_mems_allowed() is called. This stall is unncessary, however, if at least one node remains unchanged in the update to the set of allowed nodes. This was addressed by 89e8a244b97e ("cpusets: avoid looping when storing to mems_allowed if one node remains set"), but it's still possible that an empty nodemask may be read from a mempolicy because the old nodemask may be remapped to the new nodemask during rebind. To prevent this, only avoid the stall if there is no mempolicy for the thread being changed. This is a temporary solution until all reads from mempolicy nodemasks can be guaranteed to not be empty without the get_mems_allowed() synchronization. Also moves the check for nodemask intersection inside task_lock() so that tsk->mems_allowed cannot change. This ensures that nothing can set this tsk's mems_allowed out from under us and also protects tsk->mempolicy. Reported-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <paul@paulmenage.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-20 08:11:52 +07:00
bool need_loop;
cpusets: avoid looping when storing to mems_allowed if one node remains set {get,put}_mems_allowed() exist so that general kernel code may locklessly access a task's set of allowable nodes without having the chance that a concurrent write will cause the nodemask to be empty on configurations where MAX_NUMNODES > BITS_PER_LONG. This could incur a significant delay, however, especially in low memory conditions because the page allocator is blocking and reclaim requires get_mems_allowed() itself. It is not atypical to see writes to cpuset.mems take over 2 seconds to complete, for example. In low memory conditions, this is problematic because it's one of the most imporant times to change cpuset.mems in the first place! The only way a task's set of allowable nodes may change is through cpusets by writing to cpuset.mems and when attaching a task to a generic code is not reading the nodemask with get_mems_allowed() at the same time, and then clearing all the old nodes. This prevents the possibility that a reader will see an empty nodemask at the same time the writer is storing a new nodemask. If at least one node remains unchanged, though, it's possible to simply set all new nodes and then clear all the old nodes. Changing a task's nodemask is protected by cgroup_mutex so it's guaranteed that two threads are not changing the same task's nodemask at the same time, so the nodemask is guaranteed to be stored before another thread changes it and determines whether a node remains set or not. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Paul Menage <paul@paulmenage.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-03 03:38:39 +07:00
cpuset,mm: fix no node to alloc memory when changing cpuset's mems Before applying this patch, cpuset updates task->mems_allowed and mempolicy by setting all new bits in the nodemask first, and clearing all old unallowed bits later. But in the way, the allocator may find that there is no node to alloc memory. The reason is that cpuset rebinds the task's mempolicy, it cleans the nodes which the allocater can alloc pages on, for example: (mpol: mempolicy) task1 task1's mpol task2 alloc page 1 alloc on node0? NO 1 1 change mems from 1 to 0 1 rebind task1's mpol 0-1 set new bits 0 clear disallowed bits alloc on node1? NO 0 ... can't alloc page goto oom This patch fixes this problem by expanding the nodes range first(set newly allowed bits) and shrink it lazily(clear newly disallowed bits). So we use a variable to tell the write-side task that read-side task is reading nodemask, and the write-side task clears newly disallowed nodes after read-side task ends the current memory allocation. [akpm@linux-foundation.org: fix spello] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 04:32:08 +07:00
task_lock(tsk);
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask Kernels where MAX_NUMNODES > BITS_PER_LONG may temporarily see an empty nodemask in a tsk's mempolicy if its previous nodemask is remapped onto a new set of allowed cpuset nodes where the two nodemasks, as a result of the remap, are now disjoint. c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") adds get_mems_allowed() to prevent the set of allowed nodes from changing for a thread. This causes any update to a set of allowed nodes to stall until put_mems_allowed() is called. This stall is unncessary, however, if at least one node remains unchanged in the update to the set of allowed nodes. This was addressed by 89e8a244b97e ("cpusets: avoid looping when storing to mems_allowed if one node remains set"), but it's still possible that an empty nodemask may be read from a mempolicy because the old nodemask may be remapped to the new nodemask during rebind. To prevent this, only avoid the stall if there is no mempolicy for the thread being changed. This is a temporary solution until all reads from mempolicy nodemasks can be guaranteed to not be empty without the get_mems_allowed() synchronization. Also moves the check for nodemask intersection inside task_lock() so that tsk->mems_allowed cannot change. This ensures that nothing can set this tsk's mems_allowed out from under us and also protects tsk->mempolicy. Reported-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <paul@paulmenage.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-20 08:11:52 +07:00
/*
* Determine if a loop is necessary if another thread is doing
* read_mems_allowed_begin(). If at least one node remains unchanged and
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask Kernels where MAX_NUMNODES > BITS_PER_LONG may temporarily see an empty nodemask in a tsk's mempolicy if its previous nodemask is remapped onto a new set of allowed cpuset nodes where the two nodemasks, as a result of the remap, are now disjoint. c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") adds get_mems_allowed() to prevent the set of allowed nodes from changing for a thread. This causes any update to a set of allowed nodes to stall until put_mems_allowed() is called. This stall is unncessary, however, if at least one node remains unchanged in the update to the set of allowed nodes. This was addressed by 89e8a244b97e ("cpusets: avoid looping when storing to mems_allowed if one node remains set"), but it's still possible that an empty nodemask may be read from a mempolicy because the old nodemask may be remapped to the new nodemask during rebind. To prevent this, only avoid the stall if there is no mempolicy for the thread being changed. This is a temporary solution until all reads from mempolicy nodemasks can be guaranteed to not be empty without the get_mems_allowed() synchronization. Also moves the check for nodemask intersection inside task_lock() so that tsk->mems_allowed cannot change. This ensures that nothing can set this tsk's mems_allowed out from under us and also protects tsk->mempolicy. Reported-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <paul@paulmenage.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-20 08:11:52 +07:00
* tsk does not have a mempolicy, then an empty nodemask will not be
* possible when mems_allowed is larger than a word.
*/
need_loop = task_has_mempolicy(tsk) ||
!nodes_intersects(*newmems, tsk->mems_allowed);
cpuset,mm: fix no node to alloc memory when changing cpuset's mems Before applying this patch, cpuset updates task->mems_allowed and mempolicy by setting all new bits in the nodemask first, and clearing all old unallowed bits later. But in the way, the allocator may find that there is no node to alloc memory. The reason is that cpuset rebinds the task's mempolicy, it cleans the nodes which the allocater can alloc pages on, for example: (mpol: mempolicy) task1 task1's mpol task2 alloc page 1 alloc on node0? NO 1 1 change mems from 1 to 0 1 rebind task1's mpol 0-1 set new bits 0 clear disallowed bits alloc on node1? NO 0 ... can't alloc page goto oom This patch fixes this problem by expanding the nodes range first(set newly allowed bits) and shrink it lazily(clear newly disallowed bits). So we use a variable to tell the write-side task that read-side task is reading nodemask, and the write-side task clears newly disallowed nodes after read-side task ends the current memory allocation. [akpm@linux-foundation.org: fix spello] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 04:32:08 +07:00
cpuset: Fix memory allocator deadlock Juri hit the below lockdep report: [ 4.303391] ====================================================== [ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted [ 4.303395] ------------------------------------------------------ [ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290 [ 4.303417] [ 4.303417] and this task is already holding: [ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100 [ 4.303431] which would create a new lock dependency: [ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...} [ 4.303436] [ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 { [ 4.303922] HARDIRQ-ON-W at: [ 4.303923] [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0 [ 4.303926] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303929] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303931] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303933] SOFTIRQ-ON-W at: [ 4.303933] [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0 [ 4.303935] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303940] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303955] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303959] INITIAL USE at: [ 4.303960] [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0 [ 4.303963] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303966] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303969] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303972] } Which reports that we take mems_allowed_seq with interrupts enabled. A little digging found that this can only be from cpuset_change_task_nodemask(). This is an actual deadlock because an interrupt doing an allocation will hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin forever waiting for the write side to complete. Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Reported-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Juri Lelli <juri.lelli@gmail.com> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-11-26 21:03:41 +07:00
if (need_loop) {
local_irq_disable();
cpuset: mm: reduce large amounts of memory barrier related damage v3 Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") wins a super prize for the largest number of memory barriers entered into fast paths for one commit. [get|put]_mems_allowed is incredibly heavy with pairs of full memory barriers inserted into a number of hot paths. This was detected while investigating at large page allocator slowdown introduced some time after 2.6.32. The largest portion of this overhead was shown by oprofile to be at an mfence introduced by this commit into the page allocator hot path. For extra style points, the commit introduced the use of yield() in an implementation of what looks like a spinning mutex. This patch replaces the full memory barriers on both read and write sides with a sequence counter with just read barriers on the fast path side. This is much cheaper on some architectures, including x86. The main bulk of the patch is the retry logic if the nodemask changes in a manner that can cause a false failure. While updating the nodemask, a check is made to see if a false failure is a risk. If it is, the sequence number gets bumped and parallel allocators will briefly stall while the nodemask update takes place. In a page fault test microbenchmark, oprofile samples from __alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The actual results were 3.3.0-rc3 3.3.0-rc3 rc3-vanilla nobarrier-v2r1 Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%) Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%) Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%) Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%) Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%) Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%) Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%) Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%) Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%) Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%) Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%) Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%) Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%) Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%) Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%) MMTests Statistics: duration Sys Time Running Test (seconds) 135.68 132.17 User+Sys Time Running Test (seconds) 164.2 160.13 Total Elapsed Time (seconds) 123.46 120.87 The overall improvement is small but the System CPU time is much improved and roughly in correlation to what oprofile reported (these performance figures are without profiling so skew is expected). The actual number of page faults is noticeably improved. For benchmarks like kernel builds, the overall benefit is marginal but the system CPU time is slightly reduced. To test the actual bug the commit fixed I opened two terminals. The first ran within a cpuset and continually ran a small program that faulted 100M of anonymous data. In a second window, the nodemask of the cpuset was continually randomised in a loop. Without the commit, the program would fail every so often (usually within 10 seconds) and obviously with the commit everything worked fine. With this patch applied, it also worked fine so the fix should be functionally equivalent. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:11 +07:00
write_seqcount_begin(&tsk->mems_allowed_seq);
cpuset: Fix memory allocator deadlock Juri hit the below lockdep report: [ 4.303391] ====================================================== [ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted [ 4.303395] ------------------------------------------------------ [ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290 [ 4.303417] [ 4.303417] and this task is already holding: [ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100 [ 4.303431] which would create a new lock dependency: [ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...} [ 4.303436] [ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 { [ 4.303922] HARDIRQ-ON-W at: [ 4.303923] [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0 [ 4.303926] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303929] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303931] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303933] SOFTIRQ-ON-W at: [ 4.303933] [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0 [ 4.303935] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303940] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303955] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303959] INITIAL USE at: [ 4.303960] [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0 [ 4.303963] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303966] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303969] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303972] } Which reports that we take mems_allowed_seq with interrupts enabled. A little digging found that this can only be from cpuset_change_task_nodemask(). This is an actual deadlock because an interrupt doing an allocation will hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin forever waiting for the write side to complete. Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Reported-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Juri Lelli <juri.lelli@gmail.com> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-11-26 21:03:41 +07:00
}
cpuset,mm: fix no node to alloc memory when changing cpuset's mems Before applying this patch, cpuset updates task->mems_allowed and mempolicy by setting all new bits in the nodemask first, and clearing all old unallowed bits later. But in the way, the allocator may find that there is no node to alloc memory. The reason is that cpuset rebinds the task's mempolicy, it cleans the nodes which the allocater can alloc pages on, for example: (mpol: mempolicy) task1 task1's mpol task2 alloc page 1 alloc on node0? NO 1 1 change mems from 1 to 0 1 rebind task1's mpol 0-1 set new bits 0 clear disallowed bits alloc on node1? NO 0 ... can't alloc page goto oom This patch fixes this problem by expanding the nodes range first(set newly allowed bits) and shrink it lazily(clear newly disallowed bits). So we use a variable to tell the write-side task that read-side task is reading nodemask, and the write-side task clears newly disallowed nodes after read-side task ends the current memory allocation. [akpm@linux-foundation.org: fix spello] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 04:32:08 +07:00
cpuset: mm: reduce large amounts of memory barrier related damage v3 Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") wins a super prize for the largest number of memory barriers entered into fast paths for one commit. [get|put]_mems_allowed is incredibly heavy with pairs of full memory barriers inserted into a number of hot paths. This was detected while investigating at large page allocator slowdown introduced some time after 2.6.32. The largest portion of this overhead was shown by oprofile to be at an mfence introduced by this commit into the page allocator hot path. For extra style points, the commit introduced the use of yield() in an implementation of what looks like a spinning mutex. This patch replaces the full memory barriers on both read and write sides with a sequence counter with just read barriers on the fast path side. This is much cheaper on some architectures, including x86. The main bulk of the patch is the retry logic if the nodemask changes in a manner that can cause a false failure. While updating the nodemask, a check is made to see if a false failure is a risk. If it is, the sequence number gets bumped and parallel allocators will briefly stall while the nodemask update takes place. In a page fault test microbenchmark, oprofile samples from __alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The actual results were 3.3.0-rc3 3.3.0-rc3 rc3-vanilla nobarrier-v2r1 Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%) Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%) Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%) Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%) Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%) Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%) Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%) Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%) Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%) Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%) Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%) Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%) Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%) Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%) Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%) MMTests Statistics: duration Sys Time Running Test (seconds) 135.68 132.17 User+Sys Time Running Test (seconds) 164.2 160.13 Total Elapsed Time (seconds) 123.46 120.87 The overall improvement is small but the System CPU time is much improved and roughly in correlation to what oprofile reported (these performance figures are without profiling so skew is expected). The actual number of page faults is noticeably improved. For benchmarks like kernel builds, the overall benefit is marginal but the system CPU time is slightly reduced. To test the actual bug the commit fixed I opened two terminals. The first ran within a cpuset and continually ran a small program that faulted 100M of anonymous data. In a second window, the nodemask of the cpuset was continually randomised in a loop. Without the commit, the program would fail every so often (usually within 10 seconds) and obviously with the commit everything worked fine. With this patch applied, it also worked fine so the fix should be functionally equivalent. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:11 +07:00
nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems);
mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1);
cpuset,mm: fix no node to alloc memory when changing cpuset's mems Before applying this patch, cpuset updates task->mems_allowed and mempolicy by setting all new bits in the nodemask first, and clearing all old unallowed bits later. But in the way, the allocator may find that there is no node to alloc memory. The reason is that cpuset rebinds the task's mempolicy, it cleans the nodes which the allocater can alloc pages on, for example: (mpol: mempolicy) task1 task1's mpol task2 alloc page 1 alloc on node0? NO 1 1 change mems from 1 to 0 1 rebind task1's mpol 0-1 set new bits 0 clear disallowed bits alloc on node1? NO 0 ... can't alloc page goto oom This patch fixes this problem by expanding the nodes range first(set newly allowed bits) and shrink it lazily(clear newly disallowed bits). So we use a variable to tell the write-side task that read-side task is reading nodemask, and the write-side task clears newly disallowed nodes after read-side task ends the current memory allocation. [akpm@linux-foundation.org: fix spello] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 04:32:08 +07:00
mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP2);
cpuset,mm: update tasks' mems_allowed in time Fix allocating page cache/slab object on the unallowed node when memory spread is set by updating tasks' mems_allowed after its cpuset's mems is changed. In order to update tasks' mems_allowed in time, we must modify the code of memory policy. Because the memory policy is applied in the process's context originally. After applying this patch, one task directly manipulates anothers mems_allowed, and we use alloc_lock in the task_struct to protect mems_allowed and memory policy of the task. But in the fast path, we didn't use lock to protect them, because adding a lock may lead to performance regression. But if we don't add a lock,the task might see no nodes when changing cpuset's mems_allowed to some non-overlapping set. In order to avoid it, we set all new allowed nodes, then clear newly disallowed ones. [lee.schermerhorn@hp.com: The rework of mpol_new() to extract the adjusting of the node mask to apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind() with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local allocation. Fix this by adding the check for MPOL_PREFERRED and empty node mask to mpol_new_mpolicy(). Remove the now unneeded 'nodes = NULL' from mpol_new(). Note that mpol_new_mempolicy() is always called with a non-NULL 'nodes' parameter now that it has been removed from mpol_new(). Therefore, we don't need to test nodes for NULL before testing it for 'empty'. However, just to be extra paranoid, add a VM_BUG_ON() to verify this assumption.] [lee.schermerhorn@hp.com: I don't think the function name 'mpol_new_mempolicy' is descriptive enough to differentiate it from mpol_new(). This function applies cpuset set context, usually constraining nodes to those allowed by the cpuset. However, when the 'RELATIVE_NODES flag is set, it also translates the nodes. So I settled on 'mpol_set_nodemask()', because the comment block for mpol_new() mentions that we need to call this function to "set nodes". Some additional minor line length, whitespace and typo cleanup.] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Paul Menage <menage@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:31:49 +07:00
tsk->mems_allowed = *newmems;
cpuset: mm: reduce large amounts of memory barrier related damage v3 Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") wins a super prize for the largest number of memory barriers entered into fast paths for one commit. [get|put]_mems_allowed is incredibly heavy with pairs of full memory barriers inserted into a number of hot paths. This was detected while investigating at large page allocator slowdown introduced some time after 2.6.32. The largest portion of this overhead was shown by oprofile to be at an mfence introduced by this commit into the page allocator hot path. For extra style points, the commit introduced the use of yield() in an implementation of what looks like a spinning mutex. This patch replaces the full memory barriers on both read and write sides with a sequence counter with just read barriers on the fast path side. This is much cheaper on some architectures, including x86. The main bulk of the patch is the retry logic if the nodemask changes in a manner that can cause a false failure. While updating the nodemask, a check is made to see if a false failure is a risk. If it is, the sequence number gets bumped and parallel allocators will briefly stall while the nodemask update takes place. In a page fault test microbenchmark, oprofile samples from __alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The actual results were 3.3.0-rc3 3.3.0-rc3 rc3-vanilla nobarrier-v2r1 Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%) Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%) Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%) Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%) Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%) Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%) Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%) Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%) Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%) Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%) Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%) Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%) Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%) Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%) Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%) MMTests Statistics: duration Sys Time Running Test (seconds) 135.68 132.17 User+Sys Time Running Test (seconds) 164.2 160.13 Total Elapsed Time (seconds) 123.46 120.87 The overall improvement is small but the System CPU time is much improved and roughly in correlation to what oprofile reported (these performance figures are without profiling so skew is expected). The actual number of page faults is noticeably improved. For benchmarks like kernel builds, the overall benefit is marginal but the system CPU time is slightly reduced. To test the actual bug the commit fixed I opened two terminals. The first ran within a cpuset and continually ran a small program that faulted 100M of anonymous data. In a second window, the nodemask of the cpuset was continually randomised in a loop. Without the commit, the program would fail every so often (usually within 10 seconds) and obviously with the commit everything worked fine. With this patch applied, it also worked fine so the fix should be functionally equivalent. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:11 +07:00
cpuset: Fix memory allocator deadlock Juri hit the below lockdep report: [ 4.303391] ====================================================== [ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted [ 4.303395] ------------------------------------------------------ [ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290 [ 4.303417] [ 4.303417] and this task is already holding: [ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100 [ 4.303431] which would create a new lock dependency: [ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...} [ 4.303436] [ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 { [ 4.303922] HARDIRQ-ON-W at: [ 4.303923] [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0 [ 4.303926] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303929] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303931] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303933] SOFTIRQ-ON-W at: [ 4.303933] [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0 [ 4.303935] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303940] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303955] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303959] INITIAL USE at: [ 4.303960] [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0 [ 4.303963] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303966] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303969] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303972] } Which reports that we take mems_allowed_seq with interrupts enabled. A little digging found that this can only be from cpuset_change_task_nodemask(). This is an actual deadlock because an interrupt doing an allocation will hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin forever waiting for the write side to complete. Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Reported-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Juri Lelli <juri.lelli@gmail.com> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-11-26 21:03:41 +07:00
if (need_loop) {
cpuset: mm: reduce large amounts of memory barrier related damage v3 Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") wins a super prize for the largest number of memory barriers entered into fast paths for one commit. [get|put]_mems_allowed is incredibly heavy with pairs of full memory barriers inserted into a number of hot paths. This was detected while investigating at large page allocator slowdown introduced some time after 2.6.32. The largest portion of this overhead was shown by oprofile to be at an mfence introduced by this commit into the page allocator hot path. For extra style points, the commit introduced the use of yield() in an implementation of what looks like a spinning mutex. This patch replaces the full memory barriers on both read and write sides with a sequence counter with just read barriers on the fast path side. This is much cheaper on some architectures, including x86. The main bulk of the patch is the retry logic if the nodemask changes in a manner that can cause a false failure. While updating the nodemask, a check is made to see if a false failure is a risk. If it is, the sequence number gets bumped and parallel allocators will briefly stall while the nodemask update takes place. In a page fault test microbenchmark, oprofile samples from __alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The actual results were 3.3.0-rc3 3.3.0-rc3 rc3-vanilla nobarrier-v2r1 Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%) Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%) Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%) Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%) Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%) Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%) Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%) Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%) Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%) Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%) Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%) Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%) Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%) Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%) Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%) MMTests Statistics: duration Sys Time Running Test (seconds) 135.68 132.17 User+Sys Time Running Test (seconds) 164.2 160.13 Total Elapsed Time (seconds) 123.46 120.87 The overall improvement is small but the System CPU time is much improved and roughly in correlation to what oprofile reported (these performance figures are without profiling so skew is expected). The actual number of page faults is noticeably improved. For benchmarks like kernel builds, the overall benefit is marginal but the system CPU time is slightly reduced. To test the actual bug the commit fixed I opened two terminals. The first ran within a cpuset and continually ran a small program that faulted 100M of anonymous data. In a second window, the nodemask of the cpuset was continually randomised in a loop. Without the commit, the program would fail every so often (usually within 10 seconds) and obviously with the commit everything worked fine. With this patch applied, it also worked fine so the fix should be functionally equivalent. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:11 +07:00
write_seqcount_end(&tsk->mems_allowed_seq);
cpuset: Fix memory allocator deadlock Juri hit the below lockdep report: [ 4.303391] ====================================================== [ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted [ 4.303395] ------------------------------------------------------ [ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290 [ 4.303417] [ 4.303417] and this task is already holding: [ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100 [ 4.303431] which would create a new lock dependency: [ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...} [ 4.303436] [ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 { [ 4.303922] HARDIRQ-ON-W at: [ 4.303923] [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0 [ 4.303926] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303929] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303931] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303933] SOFTIRQ-ON-W at: [ 4.303933] [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0 [ 4.303935] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303940] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303955] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303959] INITIAL USE at: [ 4.303960] [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0 [ 4.303963] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303966] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303969] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303972] } Which reports that we take mems_allowed_seq with interrupts enabled. A little digging found that this can only be from cpuset_change_task_nodemask(). This is an actual deadlock because an interrupt doing an allocation will hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin forever waiting for the write side to complete. Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Reported-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Juri Lelli <juri.lelli@gmail.com> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-11-26 21:03:41 +07:00
local_irq_enable();
}
cpuset: mm: reduce large amounts of memory barrier related damage v3 Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") wins a super prize for the largest number of memory barriers entered into fast paths for one commit. [get|put]_mems_allowed is incredibly heavy with pairs of full memory barriers inserted into a number of hot paths. This was detected while investigating at large page allocator slowdown introduced some time after 2.6.32. The largest portion of this overhead was shown by oprofile to be at an mfence introduced by this commit into the page allocator hot path. For extra style points, the commit introduced the use of yield() in an implementation of what looks like a spinning mutex. This patch replaces the full memory barriers on both read and write sides with a sequence counter with just read barriers on the fast path side. This is much cheaper on some architectures, including x86. The main bulk of the patch is the retry logic if the nodemask changes in a manner that can cause a false failure. While updating the nodemask, a check is made to see if a false failure is a risk. If it is, the sequence number gets bumped and parallel allocators will briefly stall while the nodemask update takes place. In a page fault test microbenchmark, oprofile samples from __alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The actual results were 3.3.0-rc3 3.3.0-rc3 rc3-vanilla nobarrier-v2r1 Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%) Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%) Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%) Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%) Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%) Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%) Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%) Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%) Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%) Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%) Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%) Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%) Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%) Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%) Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%) MMTests Statistics: duration Sys Time Running Test (seconds) 135.68 132.17 User+Sys Time Running Test (seconds) 164.2 160.13 Total Elapsed Time (seconds) 123.46 120.87 The overall improvement is small but the System CPU time is much improved and roughly in correlation to what oprofile reported (these performance figures are without profiling so skew is expected). The actual number of page faults is noticeably improved. For benchmarks like kernel builds, the overall benefit is marginal but the system CPU time is slightly reduced. To test the actual bug the commit fixed I opened two terminals. The first ran within a cpuset and continually ran a small program that faulted 100M of anonymous data. In a second window, the nodemask of the cpuset was continually randomised in a loop. Without the commit, the program would fail every so often (usually within 10 seconds) and obviously with the commit everything worked fine. With this patch applied, it also worked fine so the fix should be functionally equivalent. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:11 +07:00
cpuset,mm: fix no node to alloc memory when changing cpuset's mems Before applying this patch, cpuset updates task->mems_allowed and mempolicy by setting all new bits in the nodemask first, and clearing all old unallowed bits later. But in the way, the allocator may find that there is no node to alloc memory. The reason is that cpuset rebinds the task's mempolicy, it cleans the nodes which the allocater can alloc pages on, for example: (mpol: mempolicy) task1 task1's mpol task2 alloc page 1 alloc on node0? NO 1 1 change mems from 1 to 0 1 rebind task1's mpol 0-1 set new bits 0 clear disallowed bits alloc on node1? NO 0 ... can't alloc page goto oom This patch fixes this problem by expanding the nodes range first(set newly allowed bits) and shrink it lazily(clear newly disallowed bits). So we use a variable to tell the write-side task that read-side task is reading nodemask, and the write-side task clears newly disallowed nodes after read-side task ends the current memory allocation. [akpm@linux-foundation.org: fix spello] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 04:32:08 +07:00
task_unlock(tsk);
cpuset,mm: update tasks' mems_allowed in time Fix allocating page cache/slab object on the unallowed node when memory spread is set by updating tasks' mems_allowed after its cpuset's mems is changed. In order to update tasks' mems_allowed in time, we must modify the code of memory policy. Because the memory policy is applied in the process's context originally. After applying this patch, one task directly manipulates anothers mems_allowed, and we use alloc_lock in the task_struct to protect mems_allowed and memory policy of the task. But in the fast path, we didn't use lock to protect them, because adding a lock may lead to performance regression. But if we don't add a lock,the task might see no nodes when changing cpuset's mems_allowed to some non-overlapping set. In order to avoid it, we set all new allowed nodes, then clear newly disallowed ones. [lee.schermerhorn@hp.com: The rework of mpol_new() to extract the adjusting of the node mask to apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind() with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local allocation. Fix this by adding the check for MPOL_PREFERRED and empty node mask to mpol_new_mpolicy(). Remove the now unneeded 'nodes = NULL' from mpol_new(). Note that mpol_new_mempolicy() is always called with a non-NULL 'nodes' parameter now that it has been removed from mpol_new(). Therefore, we don't need to test nodes for NULL before testing it for 'empty'. However, just to be extra paranoid, add a VM_BUG_ON() to verify this assumption.] [lee.schermerhorn@hp.com: I don't think the function name 'mpol_new_mempolicy' is descriptive enough to differentiate it from mpol_new(). This function applies cpuset set context, usually constraining nodes to those allowed by the cpuset. However, when the 'RELATIVE_NODES flag is set, it also translates the nodes. So I settled on 'mpol_set_nodemask()', because the comment block for mpol_new() mentions that we need to call this function to "set nodes". Some additional minor line length, whitespace and typo cleanup.] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Paul Menage <menage@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:31:49 +07:00
}
static void *cpuset_being_rebound;
/**
* update_tasks_nodemask - Update the nodemasks of tasks in the cpuset.
* @cs: the cpuset in which each task's mems_allowed mask needs to be changed
*
* Iterate through each task of @cs updating its mems_allowed to the
* effective cpuset's. As this function is called with cpuset_mutex held,
* cpuset membership stays stable.
*/
static void update_tasks_nodemask(struct cpuset *cs)
{
static nodemask_t newmems; /* protected by cpuset_mutex */
struct css_task_iter it;
struct task_struct *task;
cpuset_being_rebound = cs; /* causes mpol_dup() rebind */
[PATCH] cpuset: rebind vma mempolicies fix Fix more of longstanding bug in cpuset/mempolicy interaction. NUMA mempolicies (mm/mempolicy.c) are constrained by the current tasks cpuset to just the Memory Nodes allowed by that cpuset. The kernel maintains internal state for each mempolicy, tracking what nodes are used for the MPOL_INTERLEAVE, MPOL_BIND or MPOL_PREFERRED policies. When a tasks cpuset memory placement changes, whether because the cpuset changed, or because the task was attached to a different cpuset, then the tasks mempolicies have to be rebound to the new cpuset placement, so as to preserve the cpuset-relative numbering of the nodes in that policy. An earlier fix handled such mempolicy rebinding for mempolicies attached to a task. This fix rebinds mempolicies attached to vma's (address ranges in a tasks address space.) Due to the need to hold the task->mm->mmap_sem semaphore while updating vma's, the rebinding of vma mempolicies has to be done when the cpuset memory placement is changed, at which time mmap_sem can be safely acquired. The tasks mempolicy is rebound later, when the task next attempts to allocate memory and notices that its task->cpuset_mems_generation is out-of-date with its cpusets mems_generation. Because walking the tasklist to find all tasks attached to a changing cpuset requires holding tasklist_lock, a spinlock, one cannot update the vma's of the affected tasks while doing the tasklist scan. In general, one cannot acquire a semaphore (which can sleep) while already holding a spinlock (such as tasklist_lock). So a list of mm references has to be built up during the tasklist scan, then the tasklist lock dropped, then for each mm, its mmap_sem acquired, and the vma's in that mm rebound. Once the tasklist lock is dropped, affected tasks may fork new tasks, before their mm's are rebound. A kernel global 'cpuset_being_rebound' is set to point to the cpuset being rebound (there can only be one; cpuset modifications are done under a global 'manage_sem' semaphore), and the mpol_copy code that is used to copy a tasks mempolicies during fork catches such forking tasks, and ensures their children are also rebound. When a task is moved to a different cpuset, it is easier, as there is only one task involved. It's mm->vma's are scanned, using the same mpol_rebind_policy() as used above. It may happen that both the mpol_copy hook and the update done via the tasklist scan update the same mm twice. This is ok, as the mempolicies of each vma in an mm keep track of what mems_allowed they are relative to, and safely no-op a second request to rebind to the same nodes. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:59 +07:00
guarantee_online_mems(cs, &newmems);
[PATCH] cpuset: rebind vma mempolicies fix Fix more of longstanding bug in cpuset/mempolicy interaction. NUMA mempolicies (mm/mempolicy.c) are constrained by the current tasks cpuset to just the Memory Nodes allowed by that cpuset. The kernel maintains internal state for each mempolicy, tracking what nodes are used for the MPOL_INTERLEAVE, MPOL_BIND or MPOL_PREFERRED policies. When a tasks cpuset memory placement changes, whether because the cpuset changed, or because the task was attached to a different cpuset, then the tasks mempolicies have to be rebound to the new cpuset placement, so as to preserve the cpuset-relative numbering of the nodes in that policy. An earlier fix handled such mempolicy rebinding for mempolicies attached to a task. This fix rebinds mempolicies attached to vma's (address ranges in a tasks address space.) Due to the need to hold the task->mm->mmap_sem semaphore while updating vma's, the rebinding of vma mempolicies has to be done when the cpuset memory placement is changed, at which time mmap_sem can be safely acquired. The tasks mempolicy is rebound later, when the task next attempts to allocate memory and notices that its task->cpuset_mems_generation is out-of-date with its cpusets mems_generation. Because walking the tasklist to find all tasks attached to a changing cpuset requires holding tasklist_lock, a spinlock, one cannot update the vma's of the affected tasks while doing the tasklist scan. In general, one cannot acquire a semaphore (which can sleep) while already holding a spinlock (such as tasklist_lock). So a list of mm references has to be built up during the tasklist scan, then the tasklist lock dropped, then for each mm, its mmap_sem acquired, and the vma's in that mm rebound. Once the tasklist lock is dropped, affected tasks may fork new tasks, before their mm's are rebound. A kernel global 'cpuset_being_rebound' is set to point to the cpuset being rebound (there can only be one; cpuset modifications are done under a global 'manage_sem' semaphore), and the mpol_copy code that is used to copy a tasks mempolicies during fork catches such forking tasks, and ensures their children are also rebound. When a task is moved to a different cpuset, it is easier, as there is only one task involved. It's mm->vma's are scanned, using the same mpol_rebind_policy() as used above. It may happen that both the mpol_copy hook and the update done via the tasklist scan update the same mm twice. This is ok, as the mempolicies of each vma in an mm keep track of what mems_allowed they are relative to, and safely no-op a second request to rebind to the same nodes. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:59 +07:00
/*
* The mpol_rebind_mm() call takes mmap_sem, which we couldn't
* take while holding tasklist_lock. Forks can happen - the
* mpol_dup() cpuset_being_rebound check will catch such forks,
* and rebind their vma mempolicies too. Because we still hold
* the global cpuset_mutex, we know that no other rebind effort
* will be contending for the global variable cpuset_being_rebound.
[PATCH] cpuset: rebind vma mempolicies fix Fix more of longstanding bug in cpuset/mempolicy interaction. NUMA mempolicies (mm/mempolicy.c) are constrained by the current tasks cpuset to just the Memory Nodes allowed by that cpuset. The kernel maintains internal state for each mempolicy, tracking what nodes are used for the MPOL_INTERLEAVE, MPOL_BIND or MPOL_PREFERRED policies. When a tasks cpuset memory placement changes, whether because the cpuset changed, or because the task was attached to a different cpuset, then the tasks mempolicies have to be rebound to the new cpuset placement, so as to preserve the cpuset-relative numbering of the nodes in that policy. An earlier fix handled such mempolicy rebinding for mempolicies attached to a task. This fix rebinds mempolicies attached to vma's (address ranges in a tasks address space.) Due to the need to hold the task->mm->mmap_sem semaphore while updating vma's, the rebinding of vma mempolicies has to be done when the cpuset memory placement is changed, at which time mmap_sem can be safely acquired. The tasks mempolicy is rebound later, when the task next attempts to allocate memory and notices that its task->cpuset_mems_generation is out-of-date with its cpusets mems_generation. Because walking the tasklist to find all tasks attached to a changing cpuset requires holding tasklist_lock, a spinlock, one cannot update the vma's of the affected tasks while doing the tasklist scan. In general, one cannot acquire a semaphore (which can sleep) while already holding a spinlock (such as tasklist_lock). So a list of mm references has to be built up during the tasklist scan, then the tasklist lock dropped, then for each mm, its mmap_sem acquired, and the vma's in that mm rebound. Once the tasklist lock is dropped, affected tasks may fork new tasks, before their mm's are rebound. A kernel global 'cpuset_being_rebound' is set to point to the cpuset being rebound (there can only be one; cpuset modifications are done under a global 'manage_sem' semaphore), and the mpol_copy code that is used to copy a tasks mempolicies during fork catches such forking tasks, and ensures their children are also rebound. When a task is moved to a different cpuset, it is easier, as there is only one task involved. It's mm->vma's are scanned, using the same mpol_rebind_policy() as used above. It may happen that both the mpol_copy hook and the update done via the tasklist scan update the same mm twice. This is ok, as the mempolicies of each vma in an mm keep track of what mems_allowed they are relative to, and safely no-op a second request to rebind to the same nodes. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:59 +07:00
* It's ok if we rebind the same mm twice; mpol_rebind_mm()
* is idempotent. Also migrate pages in each mm to new nodes.
[PATCH] cpuset: rebind vma mempolicies fix Fix more of longstanding bug in cpuset/mempolicy interaction. NUMA mempolicies (mm/mempolicy.c) are constrained by the current tasks cpuset to just the Memory Nodes allowed by that cpuset. The kernel maintains internal state for each mempolicy, tracking what nodes are used for the MPOL_INTERLEAVE, MPOL_BIND or MPOL_PREFERRED policies. When a tasks cpuset memory placement changes, whether because the cpuset changed, or because the task was attached to a different cpuset, then the tasks mempolicies have to be rebound to the new cpuset placement, so as to preserve the cpuset-relative numbering of the nodes in that policy. An earlier fix handled such mempolicy rebinding for mempolicies attached to a task. This fix rebinds mempolicies attached to vma's (address ranges in a tasks address space.) Due to the need to hold the task->mm->mmap_sem semaphore while updating vma's, the rebinding of vma mempolicies has to be done when the cpuset memory placement is changed, at which time mmap_sem can be safely acquired. The tasks mempolicy is rebound later, when the task next attempts to allocate memory and notices that its task->cpuset_mems_generation is out-of-date with its cpusets mems_generation. Because walking the tasklist to find all tasks attached to a changing cpuset requires holding tasklist_lock, a spinlock, one cannot update the vma's of the affected tasks while doing the tasklist scan. In general, one cannot acquire a semaphore (which can sleep) while already holding a spinlock (such as tasklist_lock). So a list of mm references has to be built up during the tasklist scan, then the tasklist lock dropped, then for each mm, its mmap_sem acquired, and the vma's in that mm rebound. Once the tasklist lock is dropped, affected tasks may fork new tasks, before their mm's are rebound. A kernel global 'cpuset_being_rebound' is set to point to the cpuset being rebound (there can only be one; cpuset modifications are done under a global 'manage_sem' semaphore), and the mpol_copy code that is used to copy a tasks mempolicies during fork catches such forking tasks, and ensures their children are also rebound. When a task is moved to a different cpuset, it is easier, as there is only one task involved. It's mm->vma's are scanned, using the same mpol_rebind_policy() as used above. It may happen that both the mpol_copy hook and the update done via the tasklist scan update the same mm twice. This is ok, as the mempolicies of each vma in an mm keep track of what mems_allowed they are relative to, and safely no-op a second request to rebind to the same nodes. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:59 +07:00
*/
css_task_iter_start(&cs->css, &it);
while ((task = css_task_iter_next(&it))) {
struct mm_struct *mm;
bool migrate;
cpuset_change_task_nodemask(task, &newmems);
mm = get_task_mm(task);
if (!mm)
continue;
migrate = is_memory_migrate(cs);
mpol_rebind_mm(mm, &cs->mems_allowed);
if (migrate)
cpuset_migrate_mm(mm, &cs->old_mems_allowed, &newmems);
else
mmput(mm);
}
css_task_iter_end(&it);
[PATCH] cpuset: rebind vma mempolicies fix Fix more of longstanding bug in cpuset/mempolicy interaction. NUMA mempolicies (mm/mempolicy.c) are constrained by the current tasks cpuset to just the Memory Nodes allowed by that cpuset. The kernel maintains internal state for each mempolicy, tracking what nodes are used for the MPOL_INTERLEAVE, MPOL_BIND or MPOL_PREFERRED policies. When a tasks cpuset memory placement changes, whether because the cpuset changed, or because the task was attached to a different cpuset, then the tasks mempolicies have to be rebound to the new cpuset placement, so as to preserve the cpuset-relative numbering of the nodes in that policy. An earlier fix handled such mempolicy rebinding for mempolicies attached to a task. This fix rebinds mempolicies attached to vma's (address ranges in a tasks address space.) Due to the need to hold the task->mm->mmap_sem semaphore while updating vma's, the rebinding of vma mempolicies has to be done when the cpuset memory placement is changed, at which time mmap_sem can be safely acquired. The tasks mempolicy is rebound later, when the task next attempts to allocate memory and notices that its task->cpuset_mems_generation is out-of-date with its cpusets mems_generation. Because walking the tasklist to find all tasks attached to a changing cpuset requires holding tasklist_lock, a spinlock, one cannot update the vma's of the affected tasks while doing the tasklist scan. In general, one cannot acquire a semaphore (which can sleep) while already holding a spinlock (such as tasklist_lock). So a list of mm references has to be built up during the tasklist scan, then the tasklist lock dropped, then for each mm, its mmap_sem acquired, and the vma's in that mm rebound. Once the tasklist lock is dropped, affected tasks may fork new tasks, before their mm's are rebound. A kernel global 'cpuset_being_rebound' is set to point to the cpuset being rebound (there can only be one; cpuset modifications are done under a global 'manage_sem' semaphore), and the mpol_copy code that is used to copy a tasks mempolicies during fork catches such forking tasks, and ensures their children are also rebound. When a task is moved to a different cpuset, it is easier, as there is only one task involved. It's mm->vma's are scanned, using the same mpol_rebind_policy() as used above. It may happen that both the mpol_copy hook and the update done via the tasklist scan update the same mm twice. This is ok, as the mempolicies of each vma in an mm keep track of what mems_allowed they are relative to, and safely no-op a second request to rebind to the same nodes. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:59 +07:00
/*
* All the tasks' nodemasks have been updated, update
* cs->old_mems_allowed.
*/
cs->old_mems_allowed = newmems;
/* We're done rebinding vmas to this cpuset's new mems_allowed. */
cpuset_being_rebound = NULL;
}
/*
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
* update_nodemasks_hier - Update effective nodemasks and tasks in the subtree
* @cs: the cpuset to consider
* @new_mems: a temp variable for calculating new effective_mems
*
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
* When configured nodemask is changed, the effective nodemasks of this cpuset
* and all its descendants need to be updated.
*
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
* On legacy hiearchy, effective_mems will be the same with mems_allowed.
*
* Called with cpuset_mutex held
*/
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
static void update_nodemasks_hier(struct cpuset *cs, nodemask_t *new_mems)
{
struct cpuset *cp;
2013-08-09 07:11:25 +07:00
struct cgroup_subsys_state *pos_css;
rcu_read_lock();
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
cpuset_for_each_descendant_pre(cp, pos_css, cs) {
struct cpuset *parent = parent_cs(cp);
nodes_and(*new_mems, cp->mems_allowed, parent->effective_mems);
/*
* If it becomes empty, inherit the effective mask of the
* parent, which is guaranteed to have some MEMs.
*/
if (cgroup_subsys_on_dfl(cpuset_cgrp_subsys) &&
nodes_empty(*new_mems))
*new_mems = parent->effective_mems;
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
/* Skip the whole subtree if the nodemask remains the same. */
if (nodes_equal(*new_mems, cp->effective_mems)) {
pos_css = css_rightmost_descendant(pos_css);
continue;
}
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
if (!css_tryget_online(&cp->css))
continue;
rcu_read_unlock();
spin_lock_irq(&callback_lock);
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
cp->effective_mems = *new_mems;
spin_unlock_irq(&callback_lock);
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
WARN_ON(!cgroup_subsys_on_dfl(cpuset_cgrp_subsys) &&
!nodes_equal(cp->mems_allowed, cp->effective_mems));
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
update_tasks_nodemask(cp);
rcu_read_lock();
css_put(&cp->css);
}
rcu_read_unlock();
}
/*
* Handle user request to change the 'mems' memory placement
* of a cpuset. Needs to validate the request, update the
cpuset,mm: update tasks' mems_allowed in time Fix allocating page cache/slab object on the unallowed node when memory spread is set by updating tasks' mems_allowed after its cpuset's mems is changed. In order to update tasks' mems_allowed in time, we must modify the code of memory policy. Because the memory policy is applied in the process's context originally. After applying this patch, one task directly manipulates anothers mems_allowed, and we use alloc_lock in the task_struct to protect mems_allowed and memory policy of the task. But in the fast path, we didn't use lock to protect them, because adding a lock may lead to performance regression. But if we don't add a lock,the task might see no nodes when changing cpuset's mems_allowed to some non-overlapping set. In order to avoid it, we set all new allowed nodes, then clear newly disallowed ones. [lee.schermerhorn@hp.com: The rework of mpol_new() to extract the adjusting of the node mask to apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind() with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local allocation. Fix this by adding the check for MPOL_PREFERRED and empty node mask to mpol_new_mpolicy(). Remove the now unneeded 'nodes = NULL' from mpol_new(). Note that mpol_new_mempolicy() is always called with a non-NULL 'nodes' parameter now that it has been removed from mpol_new(). Therefore, we don't need to test nodes for NULL before testing it for 'empty'. However, just to be extra paranoid, add a VM_BUG_ON() to verify this assumption.] [lee.schermerhorn@hp.com: I don't think the function name 'mpol_new_mempolicy' is descriptive enough to differentiate it from mpol_new(). This function applies cpuset set context, usually constraining nodes to those allowed by the cpuset. However, when the 'RELATIVE_NODES flag is set, it also translates the nodes. So I settled on 'mpol_set_nodemask()', because the comment block for mpol_new() mentions that we need to call this function to "set nodes". Some additional minor line length, whitespace and typo cleanup.] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Paul Menage <menage@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:31:49 +07:00
* cpusets mems_allowed, and for each task in the cpuset,
* update mems_allowed and rebind task's mempolicy and any vma
* mempolicies and if the cpuset is marked 'memory_migrate',
* migrate the tasks pages to the new memory.
*
* Call with cpuset_mutex held. May take callback_lock during call.
* Will take tasklist_lock, scan tasklist for tasks in cpuset cs,
* lock each such tasks mm->mmap_sem, scan its vma's and rebind
* their mempolicies to the cpusets new mems_allowed.
*/
static int update_nodemask(struct cpuset *cs, struct cpuset *trialcs,
const char *buf)
{
int retval;
/*
* top_cpuset.mems_allowed tracks node_stats[N_MEMORY];
* it's read-only
*/
if (cs == &top_cpuset) {
retval = -EACCES;
goto done;
}
/*
* An empty mems_allowed is ok iff there are no tasks in the cpuset.
* Since nodelist_parse() fails on an empty mask, we special case
* that parsing. The validate_change() call ensures that cpusets
* with tasks have memory.
*/
if (!*buf) {
nodes_clear(trialcs->mems_allowed);
} else {
retval = nodelist_parse(buf, trialcs->mems_allowed);
if (retval < 0)
goto done;
if (!nodes_subset(trialcs->mems_allowed,
top_cpuset.mems_allowed)) {
retval = -EINVAL;
goto done;
}
}
if (nodes_equal(cs->mems_allowed, trialcs->mems_allowed)) {
retval = 0; /* Too easy - nothing to do */
goto done;
}
retval = validate_change(cs, trialcs);
if (retval < 0)
goto done;
spin_lock_irq(&callback_lock);
cs->mems_allowed = trialcs->mems_allowed;
spin_unlock_irq(&callback_lock);
cpuset: update cs->effective_{cpus, mems} when config changes We're going to have separate user-configured masks and effective ones. Eventually configured masks can only be changed by writing cpuset.cpus and cpuset.mems, and they won't be restricted by parent cpuset. While effective masks reflect cpu/memory hotplug and hierachical restriction, and these are the real masks that apply to the tasks in the cpuset. We calculate effective mask this way: - top cpuset's effective_mask == online_mask, otherwise - cpuset's effective_mask == configured_mask & parent effective_mask, if the result is empty, it inherits parent effective mask. Those behavior changes are for default hierarchy only. For legacy hierarchy, effective_mask and configured_mask are the same, so we won't break old interfaces. To make cs->effective_{cpus,mems} to be effective masks, we need to - update the effective masks at hotplug - update the effective masks at config change - take on ancestor's mask when the effective mask is empty The second item is done here. We don't need to treat root_cs specially in update_cpumasks_hier(). This won't introduce behavior change. v3: - add a WARN_ON() to check if effective masks are the same with configured masks on legacy hierarchy. - pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for it. Similar change for update_nodemasks_hier(). Suggested by Tejun. v2: - revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun. - fix to use @cp instead of @cs in these two functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-09 15:47:29 +07:00
/* use trialcs->mems_allowed as a temp variable */
update_nodemasks_hier(cs, &trialcs->mems_allowed);
done:
return retval;
}
int current_cpuset_is_being_rebound(void)
{
cpuset,mempolicy: fix sleeping function called from invalid context When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable <stable@vger.kernel.org>
2014-06-25 08:57:18 +07:00
int ret;
rcu_read_lock();
ret = task_cs(current) == cpuset_being_rebound;
rcu_read_unlock();
return ret;
}
static int update_relax_domain_level(struct cpuset *cs, s64 val)
{
#ifdef CONFIG_SMP
if (val < -1 || val >= sched_domain_level_max)
return -EINVAL;
#endif
if (val != cs->relax_domain_level) {
cs->relax_domain_level = val;
if (!cpumask_empty(cs->cpus_allowed) &&
is_sched_load_balance(cs))
rebuild_sched_domains_locked();
}
return 0;
}
/**
* update_tasks_flags - update the spread flags of tasks in the cpuset.
* @cs: the cpuset in which each task's spread flags needs to be changed
*
* Iterate through each task of @cs updating its spread flags. As this
* function is called with cpuset_mutex held, cpuset membership stays
* stable.
*/
static void update_tasks_flags(struct cpuset *cs)
{
struct css_task_iter it;
struct task_struct *task;
css_task_iter_start(&cs->css, &it);
while ((task = css_task_iter_next(&it)))
cpuset_update_task_spread_flag(cs, task);
css_task_iter_end(&it);
}
/*
* update_flag - read a 0 or a 1 in a file and update associated flag
* bit: the bit to update (see cpuset_flagbits_t)
* cs: the cpuset to update
* turning_on: whether the flag is being set or cleared
[PATCH] cpusets: dual semaphore locking overhaul Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:30 +07:00
*
* Call with cpuset_mutex held.
*/
static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs,
int turning_on)
{
struct cpuset *trialcs;
int balance_flag_changed;
int spread_flag_changed;
int err;
trialcs = alloc_trial_cpuset(cs);
if (!trialcs)
return -ENOMEM;
if (turning_on)
set_bit(bit, &trialcs->flags);
else
clear_bit(bit, &trialcs->flags);
err = validate_change(cs, trialcs);
if (err < 0)
goto out;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
balance_flag_changed = (is_sched_load_balance(cs) !=
is_sched_load_balance(trialcs));
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
spread_flag_changed = ((is_spread_slab(cs) != is_spread_slab(trialcs))
|| (is_spread_page(cs) != is_spread_page(trialcs)));
spin_lock_irq(&callback_lock);
cs->flags = trialcs->flags;
spin_unlock_irq(&callback_lock);
if (!cpumask_empty(trialcs->cpus_allowed) && balance_flag_changed)
rebuild_sched_domains_locked();
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
if (spread_flag_changed)
update_tasks_flags(cs);
out:
free_trial_cpuset(trialcs);
return err;
}
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
/*
* Frequency meter - How fast is some event occurring?
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
*
* These routines manage a digitally filtered, constant time based,
* event frequency meter. There are four routines:
* fmeter_init() - initialize a frequency meter.
* fmeter_markevent() - called each time the event happens.
* fmeter_getrate() - returns the recent rate of such events.
* fmeter_update() - internal routine used to update fmeter.
*
* A common data structure is passed to each of these routines,
* which is used to keep track of the state required to manage the
* frequency meter and its digital filter.
*
* The filter works on the number of events marked per unit time.
* The filter is single-pole low-pass recursive (IIR). The time unit
* is 1 second. Arithmetic is done using 32-bit integers scaled to
* simulate 3 decimal digits of precision (multiplied by 1000).
*
* With an FM_COEF of 933, and a time base of 1 second, the filter
* has a half-life of 10 seconds, meaning that if the events quit
* happening, then the rate returned from the fmeter_getrate()
* will be cut in half each 10 seconds, until it converges to zero.
*
* It is not worth doing a real infinitely recursive filter. If more
* than FM_MAXTICKS ticks have elapsed since the last filter event,
* just compute FM_MAXTICKS ticks worth, by which point the level
* will be stable.
*
* Limit the count of unprocessed events to FM_MAXCNT, so as to avoid
* arithmetic overflow in the fmeter_update() routine.
*
* Given the simple 32 bit integer arithmetic used, this meter works
* best for reporting rates between one per millisecond (msec) and
* one per 32 (approx) seconds. At constant rates faster than one
* per msec it maxes out at values just under 1,000,000. At constant
* rates between one per msec, and one per second it will stabilize
* to a value N*1000, where N is the rate of events per second.
* At constant rates between one per second and one per 32 seconds,
* it will be choppy, moving up on the seconds that have an event,
* and then decaying until the next event. At rates slower than
* about one in 32 seconds, it decays all the way back to zero between
* each event.
*/
#define FM_COEF 933 /* coefficient for half-life of 10 secs */
#define FM_MAXTICKS ((u32)99) /* useless computing more ticks than this */
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
#define FM_MAXCNT 1000000 /* limit cnt to avoid overflow */
#define FM_SCALE 1000 /* faux fixed point scale */
/* Initialize a frequency meter */
static void fmeter_init(struct fmeter *fmp)
{
fmp->cnt = 0;
fmp->val = 0;
fmp->time = 0;
spin_lock_init(&fmp->lock);
}
/* Internal meter update - process cnt events and update value */
static void fmeter_update(struct fmeter *fmp)
{
time64_t now;
u32 ticks;
now = ktime_get_seconds();
ticks = now - fmp->time;
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
if (ticks == 0)
return;
ticks = min(FM_MAXTICKS, ticks);
while (ticks-- > 0)
fmp->val = (FM_COEF * fmp->val) / FM_SCALE;
fmp->time = now;
fmp->val += ((FM_SCALE - FM_COEF) * fmp->cnt) / FM_SCALE;
fmp->cnt = 0;
}
/* Process any previous ticks, then bump cnt by one (times scale). */
static void fmeter_markevent(struct fmeter *fmp)
{
spin_lock(&fmp->lock);
fmeter_update(fmp);
fmp->cnt = min(FM_MAXCNT, fmp->cnt + FM_SCALE);
spin_unlock(&fmp->lock);
}
/* Process any previous ticks, then return current value. */
static int fmeter_getrate(struct fmeter *fmp)
{
int val;
spin_lock(&fmp->lock);
fmeter_update(fmp);
val = fmp->val;
spin_unlock(&fmp->lock);
return val;
}
static struct cpuset *cpuset_attach_old_cs;
/* Called by cgroups to determine if a cpuset is usable; cpuset_mutex held */
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
static int cpuset_can_attach(struct cgroup_taskset *tset)
{
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
struct cgroup_subsys_state *css;
struct cpuset *cs;
struct task_struct *task;
int ret;
/* used later by cpuset_attach() */
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
cpuset_attach_old_cs = task_cs(cgroup_taskset_first(tset, &css));
cs = css_cs(css);
mutex_lock(&cpuset_mutex);
/* allow moving tasks into an empty cpuset if on default hierarchy */
ret = -ENOSPC;
if (!cgroup_subsys_on_dfl(cpuset_cgrp_subsys) &&
(cpumask_empty(cs->cpus_allowed) || nodes_empty(cs->mems_allowed)))
goto out_unlock;
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
cgroup_taskset_for_each(task, css, tset) {
sched/deadline: Fix bandwidth check/update when migrating tasks between exclusive cpusets Exclusive cpusets are the only way users can restrict SCHED_DEADLINE tasks affinity (performing what is commonly called clustered scheduling). Unfortunately, such thing is currently broken for two reasons: - No check is performed when the user tries to attach a task to an exlusive cpuset (recall that exclusive cpusets have an associated maximum allowed bandwidth). - Bandwidths of source and destination cpusets are not correctly updated after a task is migrated between them. This patch fixes both things at once, as they are opposite faces of the same coin. The check is performed in cpuset_can_attach(), as there aren't any points of failure after that function. The updated is split in two halves. We first reserve bandwidth in the destination cpuset, after we pass the check in cpuset_can_attach(). And we then release bandwidth from the source cpuset when the task's affinity is actually changed. Even if there can be time windows when sched_setattr() may erroneously fail in the source cpuset, we are fine with it, as we can't perfom an atomic update of both cpusets at once. Reported-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Reported-by: Vincent Legout <vincent@legout.info> Signed-off-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dario Faggioli <raistlin@linux.it> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Fabio Checconi <fchecconi@gmail.com> Cc: michael@amarulasolutions.com Cc: luca.abeni@unitn.it Cc: Li Zefan <lizefan@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: cgroups@vger.kernel.org Link: http://lkml.kernel.org/r/1411118561-26323-3-git-send-email-juri.lelli@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-19 16:22:40 +07:00
ret = task_can_attach(task, cs->cpus_allowed);
if (ret)
goto out_unlock;
ret = security_task_setscheduler(task);
if (ret)
goto out_unlock;
}
/*
* Mark attach is in progress. This makes validate_change() fail
* changes which zero cpus/mems_allowed.
*/
cs->attach_in_progress++;
ret = 0;
out_unlock:
mutex_unlock(&cpuset_mutex);
return ret;
}
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
static void cpuset_cancel_attach(struct cgroup_taskset *tset)
{
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
struct cgroup_subsys_state *css;
struct cpuset *cs;
cgroup_taskset_first(tset, &css);
cs = css_cs(css);
mutex_lock(&cpuset_mutex);
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
css_cs(css)->attach_in_progress--;
mutex_unlock(&cpuset_mutex);
}
/*
* Protected by cpuset_mutex. cpus_attach is used only by cpuset_attach()
* but we can't allocate it dynamically there. Define it global and
* allocate from cpuset_init().
*/
static cpumask_var_t cpus_attach;
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
static void cpuset_attach(struct cgroup_taskset *tset)
{
/* static buf protected by cpuset_mutex */
static nodemask_t cpuset_attach_nodemask_to;
struct task_struct *task;
struct task_struct *leader;
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
struct cgroup_subsys_state *css;
struct cpuset *cs;
struct cpuset *oldcs = cpuset_attach_old_cs;
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
cgroup_taskset_first(tset, &css);
cs = css_cs(css);
mutex_lock(&cpuset_mutex);
/* prepare for attach */
if (cs == &top_cpuset)
cpumask_copy(cpus_attach, cpu_possible_mask);
else
guarantee_online_cpus(cs, cpus_attach);
guarantee_online_mems(cs, &cpuset_attach_nodemask_to);
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
cgroup_taskset_for_each(task, css, tset) {
/*
* can_attach beforehand should guarantee that this doesn't
* fail. TODO: have a better way to handle failure here
*/
WARN_ON_ONCE(set_cpus_allowed_ptr(task, cpus_attach));
cpuset_change_task_nodemask(task, &cpuset_attach_nodemask_to);
cpuset_update_task_spread_flag(cs, task);
}
/*
* Change mm for all threadgroup leaders. This is expensive and may
* sleep and should be moved outside migration path proper.
*/
cpuset_attach_nodemask_to = cs->effective_mems;
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 22:18:21 +07:00
cgroup_taskset_for_each_leader(leader, css, tset) {
struct mm_struct *mm = get_task_mm(leader);
if (mm) {
mpol_rebind_mm(mm, &cpuset_attach_nodemask_to);
/*
* old_mems_allowed is the same with mems_allowed
* here, except if this task is being moved
* automatically due to hotplug. In that case
* @mems_allowed has been updated and is empty, so
* @old_mems_allowed is the right nodesets that we
* migrate mm from.
*/
if (is_memory_migrate(cs))
cpuset_migrate_mm(mm, &oldcs->old_mems_allowed,
&cpuset_attach_nodemask_to);
else
mmput(mm);
}
[PATCH] cpuset: rebind vma mempolicies fix Fix more of longstanding bug in cpuset/mempolicy interaction. NUMA mempolicies (mm/mempolicy.c) are constrained by the current tasks cpuset to just the Memory Nodes allowed by that cpuset. The kernel maintains internal state for each mempolicy, tracking what nodes are used for the MPOL_INTERLEAVE, MPOL_BIND or MPOL_PREFERRED policies. When a tasks cpuset memory placement changes, whether because the cpuset changed, or because the task was attached to a different cpuset, then the tasks mempolicies have to be rebound to the new cpuset placement, so as to preserve the cpuset-relative numbering of the nodes in that policy. An earlier fix handled such mempolicy rebinding for mempolicies attached to a task. This fix rebinds mempolicies attached to vma's (address ranges in a tasks address space.) Due to the need to hold the task->mm->mmap_sem semaphore while updating vma's, the rebinding of vma mempolicies has to be done when the cpuset memory placement is changed, at which time mmap_sem can be safely acquired. The tasks mempolicy is rebound later, when the task next attempts to allocate memory and notices that its task->cpuset_mems_generation is out-of-date with its cpusets mems_generation. Because walking the tasklist to find all tasks attached to a changing cpuset requires holding tasklist_lock, a spinlock, one cannot update the vma's of the affected tasks while doing the tasklist scan. In general, one cannot acquire a semaphore (which can sleep) while already holding a spinlock (such as tasklist_lock). So a list of mm references has to be built up during the tasklist scan, then the tasklist lock dropped, then for each mm, its mmap_sem acquired, and the vma's in that mm rebound. Once the tasklist lock is dropped, affected tasks may fork new tasks, before their mm's are rebound. A kernel global 'cpuset_being_rebound' is set to point to the cpuset being rebound (there can only be one; cpuset modifications are done under a global 'manage_sem' semaphore), and the mpol_copy code that is used to copy a tasks mempolicies during fork catches such forking tasks, and ensures their children are also rebound. When a task is moved to a different cpuset, it is easier, as there is only one task involved. It's mm->vma's are scanned, using the same mpol_rebind_policy() as used above. It may happen that both the mpol_copy hook and the update done via the tasklist scan update the same mm twice. This is ok, as the mempolicies of each vma in an mm keep track of what mems_allowed they are relative to, and safely no-op a second request to rebind to the same nodes. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:59 +07:00
}
cs->old_mems_allowed = cpuset_attach_nodemask_to;
cs->attach_in_progress--;
if (!cs->attach_in_progress)
wake_up(&cpuset_attach_wq);
mutex_unlock(&cpuset_mutex);
}
/* The various types of files and directories in a cpuset file system */
typedef enum {
FILE_MEMORY_MIGRATE,
FILE_CPULIST,
FILE_MEMLIST,
FILE_EFFECTIVE_CPULIST,
FILE_EFFECTIVE_MEMLIST,
FILE_CPU_EXCLUSIVE,
FILE_MEM_EXCLUSIVE,
FILE_MEM_HARDWALL,
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
FILE_SCHED_LOAD_BALANCE,
FILE_SCHED_RELAX_DOMAIN_LEVEL,
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
FILE_MEMORY_PRESSURE_ENABLED,
FILE_MEMORY_PRESSURE,
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
FILE_SPREAD_PAGE,
FILE_SPREAD_SLAB,
} cpuset_filetype_t;
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:24 +07:00
static int cpuset_write_u64(struct cgroup_subsys_state *css, struct cftype *cft,
u64 val)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:24 +07:00
struct cpuset *cs = css_cs(css);
cpuset_filetype_t type = cft->private;
int retval = 0;
mutex_lock(&cpuset_mutex);
if (!is_cpuset_online(cs)) {
retval = -ENODEV;
goto out_unlock;
}
switch (type) {
case FILE_CPU_EXCLUSIVE:
retval = update_flag(CS_CPU_EXCLUSIVE, cs, val);
break;
case FILE_MEM_EXCLUSIVE:
retval = update_flag(CS_MEM_EXCLUSIVE, cs, val);
break;
case FILE_MEM_HARDWALL:
retval = update_flag(CS_MEM_HARDWALL, cs, val);
break;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
case FILE_SCHED_LOAD_BALANCE:
retval = update_flag(CS_SCHED_LOAD_BALANCE, cs, val);
break;
case FILE_MEMORY_MIGRATE:
retval = update_flag(CS_MEMORY_MIGRATE, cs, val);
break;
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
case FILE_MEMORY_PRESSURE_ENABLED:
cpuset_memory_pressure_enabled = !!val;
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
break;
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
case FILE_SPREAD_PAGE:
retval = update_flag(CS_SPREAD_PAGE, cs, val);
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
break;
case FILE_SPREAD_SLAB:
retval = update_flag(CS_SPREAD_SLAB, cs, val);
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
break;
default:
retval = -EINVAL;
break;
}
out_unlock:
mutex_unlock(&cpuset_mutex);
return retval;
}
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:24 +07:00
static int cpuset_write_s64(struct cgroup_subsys_state *css, struct cftype *cft,
s64 val)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:24 +07:00
struct cpuset *cs = css_cs(css);
cpuset_filetype_t type = cft->private;
int retval = -ENODEV;
mutex_lock(&cpuset_mutex);
if (!is_cpuset_online(cs))
goto out_unlock;
switch (type) {
case FILE_SCHED_RELAX_DOMAIN_LEVEL:
retval = update_relax_domain_level(cs, val);
break;
default:
retval = -EINVAL;
break;
}
out_unlock:
mutex_unlock(&cpuset_mutex);
return retval;
}
/*
* Common handling for a write to a "cpus" or "mems" file.
*/
static ssize_t cpuset_write_resmask(struct kernfs_open_file *of,
char *buf, size_t nbytes, loff_t off)
{
struct cpuset *cs = css_cs(of_css(of));
struct cpuset *trialcs;
int retval = -ENODEV;
buf = strstrip(buf);
cpuset: don't nest cgroup_mutex inside get_online_cpus() CPU / memory hotplug path currently grabs cgroup_mutex from hotplug event notifications. We want to separate cpuset locking from cgroup core and make cgroup_mutex outer to hotplug synchronization so that, among other things, mechanisms which depend on get_online_cpus() can be used from cgroup callbacks. In general, we want to keep cgroup_mutex the outermost lock to minimize locking interactions among different controllers. Convert cpuset_handle_hotplug() to cpuset_hotplug_workfn() and schedule it from the hotplug notifications. As the function can already handle multiple mixed events without any input, converting it to a work function is mostly trivial; however, one complication is that cpuset_update_active_cpus() needs to update sched domains synchronously to reflect an offlined cpu to avoid confusing the scheduler. This is worked around by falling back to the the default single sched domain synchronously before scheduling the actual hotplug work. This makes sched domain rebuilt twice per CPU hotplug event but the operation isn't that heavy and a lot of the second operation would be noop for systems w/ single sched domain, which is the common case. This decouples cpuset hotplug handling from the notification callbacks and there can be an arbitrary delay between the actual event and updates to cpusets. Scheduler and mm can handle it fine but moving tasks out of an empty cpuset may race against writes to the cpuset restoring execution resources which can lead to confusing behavior. Flush hotplug work item from cpuset_write_resmask() to avoid such confusions. v2: Synchronous sched domain rebuilding using the fallback sched domain added. This fixes various issues caused by confused scheduler putting tasks on a dead CPU, including the one reported by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/*
* CPU or memory hotunplug may leave @cs w/o any execution
* resources, in which case the hotplug code asynchronously updates
* configuration and transfers all tasks to the nearest ancestor
* which can execute.
*
* As writes to "cpus" or "mems" may restore @cs's execution
* resources, wait for the previously scheduled operations before
* proceeding, so that we don't end up keep removing tasks added
* after execution capability is restored.
cpuset: break kernfs active protection in cpuset_write_resmask() Writing to either "cpuset.cpus" or "cpuset.mems" file flushes cpuset_hotplug_work so that cpu or memory hotunplug doesn't end up migrating tasks off a cpuset after new resources are added to it. As cpuset_hotplug_work calls into cgroup core via cgroup_transfer_tasks(), this flushing adds the dependency to cgroup core locking from cpuset_write_resmak(). This used to be okay because cgroup interface files were protected by a different mutex; however, 8353da1f91f1 ("cgroup: remove cgroup_tree_mutex") simplified the cgroup core locking and this dependency became a deadlock hazard - cgroup file removal performed under cgroup core lock tries to drain on-going file operation which is trying to flush cpuset_hotplug_work blocked on the same cgroup core lock. The locking simplification was done because kernfs added an a lot easier way to deal with circular dependencies involving kernfs active protection. Let's use the same strategy in cpuset and break active protection in cpuset_write_resmask(). While it isn't the prettiest, this is a very rare, likely unique, situation which also goes away on the unified hierarchy. The commands to trigger the deadlock warning without the patch and the lockdep output follow. localhost:/ # mount -t cgroup -o cpuset xxx /cpuset localhost:/ # mkdir /cpuset/tmp localhost:/ # echo 1 > /cpuset/tmp/cpuset.cpus localhost:/ # echo 0 > cpuset/tmp/cpuset.mems localhost:/ # echo $$ > /cpuset/tmp/tasks localhost:/ # echo 0 > /sys/devices/system/cpu/cpu1/online ====================================================== [ INFO: possible circular locking dependency detected ] 3.16.0-rc1-0.1-default+ #7 Not tainted ------------------------------------------------------- kworker/1:0/32649 is trying to acquire lock: (cgroup_mutex){+.+.+.}, at: [<ffffffff8110e3d7>] cgroup_transfer_tasks+0x37/0x150 but task is already holding lock: (cpuset_hotplug_work){+.+...}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (cpuset_hotplug_work){+.+...}: ... -> #1 (s_active#175){++++.+}: ... -> #0 (cgroup_mutex){+.+.+.}: ... other info that might help us debug this: Chain exists of: cgroup_mutex --> s_active#175 --> cpuset_hotplug_work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuset_hotplug_work); lock(s_active#175); lock(cpuset_hotplug_work); lock(cgroup_mutex); *** DEADLOCK *** 2 locks held by kworker/1:0/32649: #0: ("events"){.+.+.+}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 #1: (cpuset_hotplug_work){+.+...}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 stack backtrace: CPU: 1 PID: 32649 Comm: kworker/1:0 Not tainted 3.16.0-rc1-0.1-default+ #7 ... Call Trace: [<ffffffff815a5f78>] dump_stack+0x72/0x8a [<ffffffff810c263f>] print_circular_bug+0x10f/0x120 [<ffffffff810c481e>] check_prev_add+0x43e/0x4b0 [<ffffffff810c4ee6>] validate_chain+0x656/0x7c0 [<ffffffff810c53d2>] __lock_acquire+0x382/0x660 [<ffffffff810c57a9>] lock_acquire+0xf9/0x170 [<ffffffff815aa13f>] mutex_lock_nested+0x6f/0x380 [<ffffffff8110e3d7>] cgroup_transfer_tasks+0x37/0x150 [<ffffffff811129c0>] hotplug_update_tasks_insane+0x110/0x1d0 [<ffffffff81112bbd>] cpuset_hotplug_update_tasks+0x13d/0x180 [<ffffffff811148ec>] cpuset_hotplug_workfn+0x18c/0x630 [<ffffffff810854d4>] process_one_work+0x254/0x520 [<ffffffff810875dd>] worker_thread+0x13d/0x3d0 [<ffffffff8108e0c8>] kthread+0xf8/0x100 [<ffffffff815acaec>] ret_from_fork+0x7c/0xb0 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Li Zefan <lizefan@huawei.com> Tested-by: Li Zefan <lizefan@huawei.com>
2014-07-01 02:47:32 +07:00
*
* cpuset_hotplug_work calls back into cgroup core via
* cgroup_transfer_tasks() and waiting for it from a cgroupfs
* operation like this one can lead to a deadlock through kernfs
* active_ref protection. Let's break the protection. Losing the
* protection is okay as we check whether @cs is online after
* grabbing cpuset_mutex anyway. This only happens on the legacy
* hierarchies.
cpuset: don't nest cgroup_mutex inside get_online_cpus() CPU / memory hotplug path currently grabs cgroup_mutex from hotplug event notifications. We want to separate cpuset locking from cgroup core and make cgroup_mutex outer to hotplug synchronization so that, among other things, mechanisms which depend on get_online_cpus() can be used from cgroup callbacks. In general, we want to keep cgroup_mutex the outermost lock to minimize locking interactions among different controllers. Convert cpuset_handle_hotplug() to cpuset_hotplug_workfn() and schedule it from the hotplug notifications. As the function can already handle multiple mixed events without any input, converting it to a work function is mostly trivial; however, one complication is that cpuset_update_active_cpus() needs to update sched domains synchronously to reflect an offlined cpu to avoid confusing the scheduler. This is worked around by falling back to the the default single sched domain synchronously before scheduling the actual hotplug work. This makes sched domain rebuilt twice per CPU hotplug event but the operation isn't that heavy and a lot of the second operation would be noop for systems w/ single sched domain, which is the common case. This decouples cpuset hotplug handling from the notification callbacks and there can be an arbitrary delay between the actual event and updates to cpusets. Scheduler and mm can handle it fine but moving tasks out of an empty cpuset may race against writes to the cpuset restoring execution resources which can lead to confusing behavior. Flush hotplug work item from cpuset_write_resmask() to avoid such confusions. v2: Synchronous sched domain rebuilding using the fallback sched domain added. This fixes various issues caused by confused scheduler putting tasks on a dead CPU, including the one reported by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
*/
cpuset: break kernfs active protection in cpuset_write_resmask() Writing to either "cpuset.cpus" or "cpuset.mems" file flushes cpuset_hotplug_work so that cpu or memory hotunplug doesn't end up migrating tasks off a cpuset after new resources are added to it. As cpuset_hotplug_work calls into cgroup core via cgroup_transfer_tasks(), this flushing adds the dependency to cgroup core locking from cpuset_write_resmak(). This used to be okay because cgroup interface files were protected by a different mutex; however, 8353da1f91f1 ("cgroup: remove cgroup_tree_mutex") simplified the cgroup core locking and this dependency became a deadlock hazard - cgroup file removal performed under cgroup core lock tries to drain on-going file operation which is trying to flush cpuset_hotplug_work blocked on the same cgroup core lock. The locking simplification was done because kernfs added an a lot easier way to deal with circular dependencies involving kernfs active protection. Let's use the same strategy in cpuset and break active protection in cpuset_write_resmask(). While it isn't the prettiest, this is a very rare, likely unique, situation which also goes away on the unified hierarchy. The commands to trigger the deadlock warning without the patch and the lockdep output follow. localhost:/ # mount -t cgroup -o cpuset xxx /cpuset localhost:/ # mkdir /cpuset/tmp localhost:/ # echo 1 > /cpuset/tmp/cpuset.cpus localhost:/ # echo 0 > cpuset/tmp/cpuset.mems localhost:/ # echo $$ > /cpuset/tmp/tasks localhost:/ # echo 0 > /sys/devices/system/cpu/cpu1/online ====================================================== [ INFO: possible circular locking dependency detected ] 3.16.0-rc1-0.1-default+ #7 Not tainted ------------------------------------------------------- kworker/1:0/32649 is trying to acquire lock: (cgroup_mutex){+.+.+.}, at: [<ffffffff8110e3d7>] cgroup_transfer_tasks+0x37/0x150 but task is already holding lock: (cpuset_hotplug_work){+.+...}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (cpuset_hotplug_work){+.+...}: ... -> #1 (s_active#175){++++.+}: ... -> #0 (cgroup_mutex){+.+.+.}: ... other info that might help us debug this: Chain exists of: cgroup_mutex --> s_active#175 --> cpuset_hotplug_work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuset_hotplug_work); lock(s_active#175); lock(cpuset_hotplug_work); lock(cgroup_mutex); *** DEADLOCK *** 2 locks held by kworker/1:0/32649: #0: ("events"){.+.+.+}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 #1: (cpuset_hotplug_work){+.+...}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 stack backtrace: CPU: 1 PID: 32649 Comm: kworker/1:0 Not tainted 3.16.0-rc1-0.1-default+ #7 ... Call Trace: [<ffffffff815a5f78>] dump_stack+0x72/0x8a [<ffffffff810c263f>] print_circular_bug+0x10f/0x120 [<ffffffff810c481e>] check_prev_add+0x43e/0x4b0 [<ffffffff810c4ee6>] validate_chain+0x656/0x7c0 [<ffffffff810c53d2>] __lock_acquire+0x382/0x660 [<ffffffff810c57a9>] lock_acquire+0xf9/0x170 [<ffffffff815aa13f>] mutex_lock_nested+0x6f/0x380 [<ffffffff8110e3d7>] cgroup_transfer_tasks+0x37/0x150 [<ffffffff811129c0>] hotplug_update_tasks_insane+0x110/0x1d0 [<ffffffff81112bbd>] cpuset_hotplug_update_tasks+0x13d/0x180 [<ffffffff811148ec>] cpuset_hotplug_workfn+0x18c/0x630 [<ffffffff810854d4>] process_one_work+0x254/0x520 [<ffffffff810875dd>] worker_thread+0x13d/0x3d0 [<ffffffff8108e0c8>] kthread+0xf8/0x100 [<ffffffff815acaec>] ret_from_fork+0x7c/0xb0 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Li Zefan <lizefan@huawei.com> Tested-by: Li Zefan <lizefan@huawei.com>
2014-07-01 02:47:32 +07:00
css_get(&cs->css);
kernfs_break_active_protection(of->kn);
cpuset: don't nest cgroup_mutex inside get_online_cpus() CPU / memory hotplug path currently grabs cgroup_mutex from hotplug event notifications. We want to separate cpuset locking from cgroup core and make cgroup_mutex outer to hotplug synchronization so that, among other things, mechanisms which depend on get_online_cpus() can be used from cgroup callbacks. In general, we want to keep cgroup_mutex the outermost lock to minimize locking interactions among different controllers. Convert cpuset_handle_hotplug() to cpuset_hotplug_workfn() and schedule it from the hotplug notifications. As the function can already handle multiple mixed events without any input, converting it to a work function is mostly trivial; however, one complication is that cpuset_update_active_cpus() needs to update sched domains synchronously to reflect an offlined cpu to avoid confusing the scheduler. This is worked around by falling back to the the default single sched domain synchronously before scheduling the actual hotplug work. This makes sched domain rebuilt twice per CPU hotplug event but the operation isn't that heavy and a lot of the second operation would be noop for systems w/ single sched domain, which is the common case. This decouples cpuset hotplug handling from the notification callbacks and there can be an arbitrary delay between the actual event and updates to cpusets. Scheduler and mm can handle it fine but moving tasks out of an empty cpuset may race against writes to the cpuset restoring execution resources which can lead to confusing behavior. Flush hotplug work item from cpuset_write_resmask() to avoid such confusions. v2: Synchronous sched domain rebuilding using the fallback sched domain added. This fixes various issues caused by confused scheduler putting tasks on a dead CPU, including the one reported by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
flush_work(&cpuset_hotplug_work);
mutex_lock(&cpuset_mutex);
if (!is_cpuset_online(cs))
goto out_unlock;
trialcs = alloc_trial_cpuset(cs);
if (!trialcs) {
retval = -ENOMEM;
goto out_unlock;
}
switch (of_cft(of)->private) {
case FILE_CPULIST:
retval = update_cpumask(cs, trialcs, buf);
break;
case FILE_MEMLIST:
retval = update_nodemask(cs, trialcs, buf);
break;
default:
retval = -EINVAL;
break;
}
free_trial_cpuset(trialcs);
out_unlock:
mutex_unlock(&cpuset_mutex);
cpuset: break kernfs active protection in cpuset_write_resmask() Writing to either "cpuset.cpus" or "cpuset.mems" file flushes cpuset_hotplug_work so that cpu or memory hotunplug doesn't end up migrating tasks off a cpuset after new resources are added to it. As cpuset_hotplug_work calls into cgroup core via cgroup_transfer_tasks(), this flushing adds the dependency to cgroup core locking from cpuset_write_resmak(). This used to be okay because cgroup interface files were protected by a different mutex; however, 8353da1f91f1 ("cgroup: remove cgroup_tree_mutex") simplified the cgroup core locking and this dependency became a deadlock hazard - cgroup file removal performed under cgroup core lock tries to drain on-going file operation which is trying to flush cpuset_hotplug_work blocked on the same cgroup core lock. The locking simplification was done because kernfs added an a lot easier way to deal with circular dependencies involving kernfs active protection. Let's use the same strategy in cpuset and break active protection in cpuset_write_resmask(). While it isn't the prettiest, this is a very rare, likely unique, situation which also goes away on the unified hierarchy. The commands to trigger the deadlock warning without the patch and the lockdep output follow. localhost:/ # mount -t cgroup -o cpuset xxx /cpuset localhost:/ # mkdir /cpuset/tmp localhost:/ # echo 1 > /cpuset/tmp/cpuset.cpus localhost:/ # echo 0 > cpuset/tmp/cpuset.mems localhost:/ # echo $$ > /cpuset/tmp/tasks localhost:/ # echo 0 > /sys/devices/system/cpu/cpu1/online ====================================================== [ INFO: possible circular locking dependency detected ] 3.16.0-rc1-0.1-default+ #7 Not tainted ------------------------------------------------------- kworker/1:0/32649 is trying to acquire lock: (cgroup_mutex){+.+.+.}, at: [<ffffffff8110e3d7>] cgroup_transfer_tasks+0x37/0x150 but task is already holding lock: (cpuset_hotplug_work){+.+...}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (cpuset_hotplug_work){+.+...}: ... -> #1 (s_active#175){++++.+}: ... -> #0 (cgroup_mutex){+.+.+.}: ... other info that might help us debug this: Chain exists of: cgroup_mutex --> s_active#175 --> cpuset_hotplug_work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuset_hotplug_work); lock(s_active#175); lock(cpuset_hotplug_work); lock(cgroup_mutex); *** DEADLOCK *** 2 locks held by kworker/1:0/32649: #0: ("events"){.+.+.+}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 #1: (cpuset_hotplug_work){+.+...}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 stack backtrace: CPU: 1 PID: 32649 Comm: kworker/1:0 Not tainted 3.16.0-rc1-0.1-default+ #7 ... Call Trace: [<ffffffff815a5f78>] dump_stack+0x72/0x8a [<ffffffff810c263f>] print_circular_bug+0x10f/0x120 [<ffffffff810c481e>] check_prev_add+0x43e/0x4b0 [<ffffffff810c4ee6>] validate_chain+0x656/0x7c0 [<ffffffff810c53d2>] __lock_acquire+0x382/0x660 [<ffffffff810c57a9>] lock_acquire+0xf9/0x170 [<ffffffff815aa13f>] mutex_lock_nested+0x6f/0x380 [<ffffffff8110e3d7>] cgroup_transfer_tasks+0x37/0x150 [<ffffffff811129c0>] hotplug_update_tasks_insane+0x110/0x1d0 [<ffffffff81112bbd>] cpuset_hotplug_update_tasks+0x13d/0x180 [<ffffffff811148ec>] cpuset_hotplug_workfn+0x18c/0x630 [<ffffffff810854d4>] process_one_work+0x254/0x520 [<ffffffff810875dd>] worker_thread+0x13d/0x3d0 [<ffffffff8108e0c8>] kthread+0xf8/0x100 [<ffffffff815acaec>] ret_from_fork+0x7c/0xb0 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Li Zefan <lizefan@huawei.com> Tested-by: Li Zefan <lizefan@huawei.com>
2014-07-01 02:47:32 +07:00
kernfs_unbreak_active_protection(of->kn);
css_put(&cs->css);
flush_workqueue(cpuset_migrate_mm_wq);
return retval ?: nbytes;
}
/*
* These ascii lists should be read in a single call, by using a user
* buffer large enough to hold the entire map. If read in smaller
* chunks, there is no guarantee of atomicity. Since the display format
* used, list of ranges of sequential numbers, is variable length,
* and since these maps can change value dynamically, one could read
* gibberish by doing partial reads while a list was changing.
*/
static int cpuset_common_seq_show(struct seq_file *sf, void *v)
{
struct cpuset *cs = css_cs(seq_css(sf));
cpuset_filetype_t type = seq_cft(sf)->private;
int ret = 0;
spin_lock_irq(&callback_lock);
switch (type) {
case FILE_CPULIST:
seq_printf(sf, "%*pbl\n", cpumask_pr_args(cs->cpus_allowed));
break;
case FILE_MEMLIST:
seq_printf(sf, "%*pbl\n", nodemask_pr_args(&cs->mems_allowed));
break;
case FILE_EFFECTIVE_CPULIST:
seq_printf(sf, "%*pbl\n", cpumask_pr_args(cs->effective_cpus));
break;
case FILE_EFFECTIVE_MEMLIST:
seq_printf(sf, "%*pbl\n", nodemask_pr_args(&cs->effective_mems));
break;
default:
ret = -EINVAL;
}
spin_unlock_irq(&callback_lock);
return ret;
}
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:24 +07:00
static u64 cpuset_read_u64(struct cgroup_subsys_state *css, struct cftype *cft)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:24 +07:00
struct cpuset *cs = css_cs(css);
cpuset_filetype_t type = cft->private;
switch (type) {
case FILE_CPU_EXCLUSIVE:
return is_cpu_exclusive(cs);
case FILE_MEM_EXCLUSIVE:
return is_mem_exclusive(cs);
case FILE_MEM_HARDWALL:
return is_mem_hardwall(cs);
case FILE_SCHED_LOAD_BALANCE:
return is_sched_load_balance(cs);
case FILE_MEMORY_MIGRATE:
return is_memory_migrate(cs);
case FILE_MEMORY_PRESSURE_ENABLED:
return cpuset_memory_pressure_enabled;
case FILE_MEMORY_PRESSURE:
return fmeter_getrate(&cs->fmeter);
case FILE_SPREAD_PAGE:
return is_spread_page(cs);
case FILE_SPREAD_SLAB:
return is_spread_slab(cs);
default:
BUG();
}
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
/* Unreachable but makes gcc happy */
return 0;
}
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:24 +07:00
static s64 cpuset_read_s64(struct cgroup_subsys_state *css, struct cftype *cft)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:24 +07:00
struct cpuset *cs = css_cs(css);
cpuset_filetype_t type = cft->private;
switch (type) {
case FILE_SCHED_RELAX_DOMAIN_LEVEL:
return cs->relax_domain_level;
default:
BUG();
}
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
/* Unrechable but makes gcc happy */
return 0;
}
/*
* for the common functions, 'private' gives the type of file
*/
static struct cftype files[] = {
{
.name = "cpus",
.seq_show = cpuset_common_seq_show,
.write = cpuset_write_resmask,
.max_write_len = (100U + 6 * NR_CPUS),
.private = FILE_CPULIST,
},
{
.name = "mems",
.seq_show = cpuset_common_seq_show,
.write = cpuset_write_resmask,
.max_write_len = (100U + 6 * MAX_NUMNODES),
.private = FILE_MEMLIST,
},
{
.name = "effective_cpus",
.seq_show = cpuset_common_seq_show,
.private = FILE_EFFECTIVE_CPULIST,
},
{
.name = "effective_mems",
.seq_show = cpuset_common_seq_show,
.private = FILE_EFFECTIVE_MEMLIST,
},
{
.name = "cpu_exclusive",
.read_u64 = cpuset_read_u64,
.write_u64 = cpuset_write_u64,
.private = FILE_CPU_EXCLUSIVE,
},
{
.name = "mem_exclusive",
.read_u64 = cpuset_read_u64,
.write_u64 = cpuset_write_u64,
.private = FILE_MEM_EXCLUSIVE,
},
{
.name = "mem_hardwall",
.read_u64 = cpuset_read_u64,
.write_u64 = cpuset_write_u64,
.private = FILE_MEM_HARDWALL,
},
{
.name = "sched_load_balance",
.read_u64 = cpuset_read_u64,
.write_u64 = cpuset_write_u64,
.private = FILE_SCHED_LOAD_BALANCE,
},
{
.name = "sched_relax_domain_level",
.read_s64 = cpuset_read_s64,
.write_s64 = cpuset_write_s64,
.private = FILE_SCHED_RELAX_DOMAIN_LEVEL,
},
{
.name = "memory_migrate",
.read_u64 = cpuset_read_u64,
.write_u64 = cpuset_write_u64,
.private = FILE_MEMORY_MIGRATE,
},
{
.name = "memory_pressure",
.read_u64 = cpuset_read_u64,
},
{
.name = "memory_spread_page",
.read_u64 = cpuset_read_u64,
.write_u64 = cpuset_write_u64,
.private = FILE_SPREAD_PAGE,
},
{
.name = "memory_spread_slab",
.read_u64 = cpuset_read_u64,
.write_u64 = cpuset_write_u64,
.private = FILE_SPREAD_SLAB,
},
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
{
.name = "memory_pressure_enabled",
.flags = CFTYPE_ONLY_ON_ROOT,
.read_u64 = cpuset_read_u64,
.write_u64 = cpuset_write_u64,
.private = FILE_MEMORY_PRESSURE_ENABLED,
},
{ } /* terminate */
};
/*
* cpuset_css_alloc - allocate a cpuset css
* cgrp: control group that the new cpuset will be part of
*/
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
static struct cgroup_subsys_state *
cpuset_css_alloc(struct cgroup_subsys_state *parent_css)
{
struct cpuset *cs;
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
if (!parent_css)
return &top_cpuset.css;
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs)
return ERR_PTR(-ENOMEM);
if (!alloc_cpumask_var(&cs->cpus_allowed, GFP_KERNEL))
goto free_cs;
if (!alloc_cpumask_var(&cs->effective_cpus, GFP_KERNEL))
goto free_cpus;
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
set_bit(CS_SCHED_LOAD_BALANCE, &cs->flags);
cpumask_clear(cs->cpus_allowed);
nodes_clear(cs->mems_allowed);
cpumask_clear(cs->effective_cpus);
nodes_clear(cs->effective_mems);
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
fmeter_init(&cs->fmeter);
cs->relax_domain_level = -1;
return &cs->css;
free_cpus:
free_cpumask_var(cs->cpus_allowed);
free_cs:
kfree(cs);
return ERR_PTR(-ENOMEM);
}
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
static int cpuset_css_online(struct cgroup_subsys_state *css)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
struct cpuset *cs = css_cs(css);
struct cpuset *parent = parent_cs(cs);
struct cpuset *tmp_cs;
2013-08-09 07:11:25 +07:00
struct cgroup_subsys_state *pos_css;
if (!parent)
return 0;
mutex_lock(&cpuset_mutex);
set_bit(CS_ONLINE, &cs->flags);
if (is_spread_page(parent))
set_bit(CS_SPREAD_PAGE, &cs->flags);
if (is_spread_slab(parent))
set_bit(CS_SPREAD_SLAB, &cs->flags);
cpuset_inc();
spin_lock_irq(&callback_lock);
if (cgroup_subsys_on_dfl(cpuset_cgrp_subsys)) {
cpumask_copy(cs->effective_cpus, parent->effective_cpus);
cs->effective_mems = parent->effective_mems;
}
spin_unlock_irq(&callback_lock);
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
if (!test_bit(CGRP_CPUSET_CLONE_CHILDREN, &css->cgroup->flags))
goto out_unlock;
/*
* Clone @parent's configuration if CGRP_CPUSET_CLONE_CHILDREN is
* set. This flag handling is implemented in cgroup core for
* histrical reasons - the flag may be specified during mount.
*
* Currently, if any sibling cpusets have exclusive cpus or mem, we
* refuse to clone the configuration - thereby refusing the task to
* be entered, and as a result refusing the sys_unshare() or
* clone() which initiated it. If this becomes a problem for some
* users who wish to allow that scenario, then this could be
* changed to grant parent->cpus_allowed-sibling_cpus_exclusive
* (and likewise for mems) to the new cgroup.
*/
rcu_read_lock();
2013-08-09 07:11:25 +07:00
cpuset_for_each_child(tmp_cs, pos_css, parent) {
if (is_mem_exclusive(tmp_cs) || is_cpu_exclusive(tmp_cs)) {
rcu_read_unlock();
goto out_unlock;
}
}
rcu_read_unlock();
spin_lock_irq(&callback_lock);
cs->mems_allowed = parent->mems_allowed;
cs->effective_mems = parent->mems_allowed;
cpumask_copy(cs->cpus_allowed, parent->cpus_allowed);
cpumask_copy(cs->effective_cpus, parent->cpus_allowed);
spin_unlock_irq(&callback_lock);
out_unlock:
mutex_unlock(&cpuset_mutex);
return 0;
}
/*
* If the cpuset being removed has its flag 'sched_load_balance'
* enabled, then simulate turning sched_load_balance off, which
* will call rebuild_sched_domains_locked().
*/
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
static void cpuset_css_offline(struct cgroup_subsys_state *css)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
struct cpuset *cs = css_cs(css);
mutex_lock(&cpuset_mutex);
if (is_sched_load_balance(cs))
update_flag(CS_SCHED_LOAD_BALANCE, cs, 0);
cpuset_dec();
clear_bit(CS_ONLINE, &cs->flags);
mutex_unlock(&cpuset_mutex);
}
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
static void cpuset_css_free(struct cgroup_subsys_state *css)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 07:11:23 +07:00
struct cpuset *cs = css_cs(css);
free_cpumask_var(cs->effective_cpus);
free_cpumask_var(cs->cpus_allowed);
kfree(cs);
}
static void cpuset_bind(struct cgroup_subsys_state *root_css)
{
mutex_lock(&cpuset_mutex);
spin_lock_irq(&callback_lock);
if (cgroup_subsys_on_dfl(cpuset_cgrp_subsys)) {
cpumask_copy(top_cpuset.cpus_allowed, cpu_possible_mask);
top_cpuset.mems_allowed = node_possible_map;
} else {
cpumask_copy(top_cpuset.cpus_allowed,
top_cpuset.effective_cpus);
top_cpuset.mems_allowed = top_cpuset.effective_mems;
}
spin_unlock_irq(&callback_lock);
mutex_unlock(&cpuset_mutex);
}
/*
* Make sure the new task conform to the current state of its parent,
* which could have been changed by cpuset just after it inherits the
* state from the parent and before it sits on the cgroup's task list.
*/
static void cpuset_fork(struct task_struct *task)
{
if (task_css_is_root(task, cpuset_cgrp_id))
return;
set_cpus_allowed_ptr(task, &current->cpus_allowed);
task->mems_allowed = current->mems_allowed;
}
cgroup: clean up cgroup_subsys names and initialization cgroup_subsys is a bit messier than it needs to be. * The name of a subsys can be different from its internal identifier defined in cgroup_subsys.h. Most subsystems use the matching name but three - cpu, memory and perf_event - use different ones. * cgroup_subsys_id enums are postfixed with _subsys_id and each cgroup_subsys is postfixed with _subsys. cgroup.h is widely included throughout various subsystems, it doesn't and shouldn't have claim on such generic names which don't have any qualifier indicating that they belong to cgroup. * cgroup_subsys->subsys_id should always equal the matching cgroup_subsys_id enum; however, we require each controller to initialize it and then BUG if they don't match, which is a bit silly. This patch cleans up cgroup_subsys names and initialization by doing the followings. * cgroup_subsys_id enums are now postfixed with _cgrp_id, and each cgroup_subsys with _cgrp_subsys. * With the above, renaming subsys identifiers to match the userland visible names doesn't cause any naming conflicts. All non-matching identifiers are renamed to match the official names. cpu_cgroup -> cpu mem_cgroup -> memory perf -> perf_event * controllers no longer need to initialize ->subsys_id and ->name. They're generated in cgroup core and set automatically during boot. * Redundant cgroup_subsys declarations removed. * While updating BUG_ON()s in cgroup_init_early(), convert them to WARN()s. BUGging that early during boot is stupid - the kernel can't print anything, even through serial console and the trap handler doesn't even link stack frame properly for back-tracing. This patch doesn't introduce any behavior changes. v2: Rebased on top of fe1217c4f3f7 ("net: net_cls: move cgroupfs classid handling into core"). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Ingo Molnar <mingo@redhat.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Thomas Graf <tgraf@suug.ch>
2014-02-08 22:36:58 +07:00
struct cgroup_subsys cpuset_cgrp_subsys = {
.css_alloc = cpuset_css_alloc,
.css_online = cpuset_css_online,
.css_offline = cpuset_css_offline,
.css_free = cpuset_css_free,
.can_attach = cpuset_can_attach,
.cancel_attach = cpuset_cancel_attach,
.attach = cpuset_attach,
.post_attach = cpuset_post_attach,
.bind = cpuset_bind,
.fork = cpuset_fork,
.legacy_cftypes = files,
.early_init = true,
};
/**
* cpuset_init - initialize cpusets at system boot
*
* Description: Initialize top_cpuset and the cpuset internal file system,
**/
int __init cpuset_init(void)
{
int err = 0;
BUG_ON(!alloc_cpumask_var(&top_cpuset.cpus_allowed, GFP_KERNEL));
BUG_ON(!alloc_cpumask_var(&top_cpuset.effective_cpus, GFP_KERNEL));
cpuset,mm: update tasks' mems_allowed in time Fix allocating page cache/slab object on the unallowed node when memory spread is set by updating tasks' mems_allowed after its cpuset's mems is changed. In order to update tasks' mems_allowed in time, we must modify the code of memory policy. Because the memory policy is applied in the process's context originally. After applying this patch, one task directly manipulates anothers mems_allowed, and we use alloc_lock in the task_struct to protect mems_allowed and memory policy of the task. But in the fast path, we didn't use lock to protect them, because adding a lock may lead to performance regression. But if we don't add a lock,the task might see no nodes when changing cpuset's mems_allowed to some non-overlapping set. In order to avoid it, we set all new allowed nodes, then clear newly disallowed ones. [lee.schermerhorn@hp.com: The rework of mpol_new() to extract the adjusting of the node mask to apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind() with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local allocation. Fix this by adding the check for MPOL_PREFERRED and empty node mask to mpol_new_mpolicy(). Remove the now unneeded 'nodes = NULL' from mpol_new(). Note that mpol_new_mempolicy() is always called with a non-NULL 'nodes' parameter now that it has been removed from mpol_new(). Therefore, we don't need to test nodes for NULL before testing it for 'empty'. However, just to be extra paranoid, add a VM_BUG_ON() to verify this assumption.] [lee.schermerhorn@hp.com: I don't think the function name 'mpol_new_mempolicy' is descriptive enough to differentiate it from mpol_new(). This function applies cpuset set context, usually constraining nodes to those allowed by the cpuset. However, when the 'RELATIVE_NODES flag is set, it also translates the nodes. So I settled on 'mpol_set_nodemask()', because the comment block for mpol_new() mentions that we need to call this function to "set nodes". Some additional minor line length, whitespace and typo cleanup.] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Paul Menage <menage@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:31:49 +07:00
cpumask_setall(top_cpuset.cpus_allowed);
nodes_setall(top_cpuset.mems_allowed);
cpumask_setall(top_cpuset.effective_cpus);
nodes_setall(top_cpuset.effective_mems);
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
fmeter_init(&top_cpuset.fmeter);
cpuset sched_load_balance flag Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:40:20 +07:00
set_bit(CS_SCHED_LOAD_BALANCE, &top_cpuset.flags);
top_cpuset.relax_domain_level = -1;
err = register_filesystem(&cpuset_fs_type);
if (err < 0)
return err;
BUG_ON(!alloc_cpumask_var(&cpus_attach, GFP_KERNEL));
return 0;
}
/*
sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12 04:33:53 +07:00
* If CPU and/or memory hotplug handlers, below, unplug any CPUs
* or memory nodes, we need to walk over the cpuset hierarchy,
* removing that CPU or node from all cpusets. If this removes the
* last CPU or node from a cpuset, then move the tasks in the empty
* cpuset to its next-highest non-empty parent.
*/
static void remove_tasks_in_empty_cpuset(struct cpuset *cs)
{
struct cpuset *parent;
/*
* Find its next-highest non-empty parent, (top cpuset
* has online cpus, so can't be empty).
*/
parent = parent_cs(cs);
while (cpumask_empty(parent->cpus_allowed) ||
nodes_empty(parent->mems_allowed))
parent = parent_cs(parent);
if (cgroup_transfer_tasks(parent->css.cgroup, cs->css.cgroup)) {
pr_err("cpuset: failed to transfer tasks out of empty cpuset ");
cgroup: remove cgroup->name cgroup->name handling became quite complicated over time involving dedicated struct cgroup_name for RCU protection. Now that cgroup is on kernfs, we can drop all of it and simply use kernfs_name/path() and friends. Replace cgroup->name and all related code with kernfs name/path constructs. * Reimplement cgroup_name() and cgroup_path() as thin wrappers on top of kernfs counterparts, which involves semantic changes. pr_cont_cgroup_name() and pr_cont_cgroup_path() added. * cgroup->name handling dropped from cgroup_rename(). * All users of cgroup_name/path() updated to the new semantics. Users which were formatting the string just to printk them are converted to use pr_cont_cgroup_name/path() instead, which simplifies things quite a bit. As cgroup_name() no longer requires RCU read lock around it, RCU lockings which were protecting only cgroup_name() are removed. v2: Comment above oom_info_lock updated as suggested by Michal. v3: dummy_top doesn't have a kn associated and pr_cont_cgroup_name/path() ended up calling the matching kernfs functions with NULL kn leading to oops. Test for NULL kn and print "/" if so. This issue was reported by Fengguang Wu. v4: Rebased on top of 0ab02ca8f887 ("cgroup: protect modifications to cgroup_idr with cgroup_mutex"). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
2014-02-12 21:29:50 +07:00
pr_cont_cgroup_name(cs->css.cgroup);
pr_cont("\n");
}
}
static void
hotplug_update_tasks_legacy(struct cpuset *cs,
struct cpumask *new_cpus, nodemask_t *new_mems,
bool cpus_updated, bool mems_updated)
{
bool is_empty;
spin_lock_irq(&callback_lock);
cpumask_copy(cs->cpus_allowed, new_cpus);
cpumask_copy(cs->effective_cpus, new_cpus);
cs->mems_allowed = *new_mems;
cs->effective_mems = *new_mems;
spin_unlock_irq(&callback_lock);
/*
* Don't call update_tasks_cpumask() if the cpuset becomes empty,
* as the tasks will be migratecd to an ancestor.
*/
if (cpus_updated && !cpumask_empty(cs->cpus_allowed))
update_tasks_cpumask(cs);
if (mems_updated && !nodes_empty(cs->mems_allowed))
update_tasks_nodemask(cs);
is_empty = cpumask_empty(cs->cpus_allowed) ||
nodes_empty(cs->mems_allowed);
mutex_unlock(&cpuset_mutex);
/*
* Move tasks to the nearest ancestor with execution resources,
* This is full cgroup operation which will also call back into
* cpuset. Should be done outside any lock.
*/
if (is_empty)
remove_tasks_in_empty_cpuset(cs);
mutex_lock(&cpuset_mutex);
}
static void
hotplug_update_tasks(struct cpuset *cs,
struct cpumask *new_cpus, nodemask_t *new_mems,
bool cpus_updated, bool mems_updated)
{
if (cpumask_empty(new_cpus))
cpumask_copy(new_cpus, parent_cs(cs)->effective_cpus);
if (nodes_empty(*new_mems))
*new_mems = parent_cs(cs)->effective_mems;
spin_lock_irq(&callback_lock);
cpumask_copy(cs->effective_cpus, new_cpus);
cs->effective_mems = *new_mems;
spin_unlock_irq(&callback_lock);
if (cpus_updated)
update_tasks_cpumask(cs);
if (mems_updated)
update_tasks_nodemask(cs);
}
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/**
* cpuset_hotplug_update_tasks - update tasks in a cpuset for hotunplug
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
* @cs: cpuset in interest
*
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
* Compare @cs's cpu and mem masks against top_cpuset and if some have gone
* offline, update @cs accordingly. If @cs ends up with no CPU or memory,
* all its tasks are moved to the nearest ancestor with both resources.
*/
static void cpuset_hotplug_update_tasks(struct cpuset *cs)
{
static cpumask_t new_cpus;
static nodemask_t new_mems;
bool cpus_updated;
bool mems_updated;
retry:
wait_event(cpuset_attach_wq, cs->attach_in_progress == 0);
mutex_lock(&cpuset_mutex);
/*
* We have raced with task attaching. We wait until attaching
* is finished, so we won't attach a task to an empty cpuset.
*/
if (cs->attach_in_progress) {
mutex_unlock(&cpuset_mutex);
goto retry;
}
cpumask_and(&new_cpus, cs->cpus_allowed, parent_cs(cs)->effective_cpus);
nodes_and(new_mems, cs->mems_allowed, parent_cs(cs)->effective_mems);
cpus_updated = !cpumask_equal(&new_cpus, cs->effective_cpus);
mems_updated = !nodes_equal(new_mems, cs->effective_mems);
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
if (cgroup_subsys_on_dfl(cpuset_cgrp_subsys))
hotplug_update_tasks(cs, &new_cpus, &new_mems,
cpus_updated, mems_updated);
else
hotplug_update_tasks_legacy(cs, &new_cpus, &new_mems,
cpus_updated, mems_updated);
mutex_unlock(&cpuset_mutex);
}
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/**
cpuset: don't nest cgroup_mutex inside get_online_cpus() CPU / memory hotplug path currently grabs cgroup_mutex from hotplug event notifications. We want to separate cpuset locking from cgroup core and make cgroup_mutex outer to hotplug synchronization so that, among other things, mechanisms which depend on get_online_cpus() can be used from cgroup callbacks. In general, we want to keep cgroup_mutex the outermost lock to minimize locking interactions among different controllers. Convert cpuset_handle_hotplug() to cpuset_hotplug_workfn() and schedule it from the hotplug notifications. As the function can already handle multiple mixed events without any input, converting it to a work function is mostly trivial; however, one complication is that cpuset_update_active_cpus() needs to update sched domains synchronously to reflect an offlined cpu to avoid confusing the scheduler. This is worked around by falling back to the the default single sched domain synchronously before scheduling the actual hotplug work. This makes sched domain rebuilt twice per CPU hotplug event but the operation isn't that heavy and a lot of the second operation would be noop for systems w/ single sched domain, which is the common case. This decouples cpuset hotplug handling from the notification callbacks and there can be an arbitrary delay between the actual event and updates to cpusets. Scheduler and mm can handle it fine but moving tasks out of an empty cpuset may race against writes to the cpuset restoring execution resources which can lead to confusing behavior. Flush hotplug work item from cpuset_write_resmask() to avoid such confusions. v2: Synchronous sched domain rebuilding using the fallback sched domain added. This fixes various issues caused by confused scheduler putting tasks on a dead CPU, including the one reported by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
* cpuset_hotplug_workfn - handle CPU/memory hotunplug for a cpuset
*
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
* This function is called after either CPU or memory configuration has
* changed and updates cpuset accordingly. The top_cpuset is always
* synchronized to cpu_active_mask and N_MEMORY, which is necessary in
* order to make cpusets transparent (of no affect) on systems that are
* actively using CPU hotplug but making no active use of cpusets.
*
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
* Non-root cpusets are only affected by offlining. If any CPUs or memory
* nodes have been taken down, cpuset_hotplug_update_tasks() is invoked on
* all descendants.
*
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
* Note that CPU offlining during suspend is ignored. We don't modify
* cpusets across suspend/resume cycles at all.
*/
cpuset: don't nest cgroup_mutex inside get_online_cpus() CPU / memory hotplug path currently grabs cgroup_mutex from hotplug event notifications. We want to separate cpuset locking from cgroup core and make cgroup_mutex outer to hotplug synchronization so that, among other things, mechanisms which depend on get_online_cpus() can be used from cgroup callbacks. In general, we want to keep cgroup_mutex the outermost lock to minimize locking interactions among different controllers. Convert cpuset_handle_hotplug() to cpuset_hotplug_workfn() and schedule it from the hotplug notifications. As the function can already handle multiple mixed events without any input, converting it to a work function is mostly trivial; however, one complication is that cpuset_update_active_cpus() needs to update sched domains synchronously to reflect an offlined cpu to avoid confusing the scheduler. This is worked around by falling back to the the default single sched domain synchronously before scheduling the actual hotplug work. This makes sched domain rebuilt twice per CPU hotplug event but the operation isn't that heavy and a lot of the second operation would be noop for systems w/ single sched domain, which is the common case. This decouples cpuset hotplug handling from the notification callbacks and there can be an arbitrary delay between the actual event and updates to cpusets. Scheduler and mm can handle it fine but moving tasks out of an empty cpuset may race against writes to the cpuset restoring execution resources which can lead to confusing behavior. Flush hotplug work item from cpuset_write_resmask() to avoid such confusions. v2: Synchronous sched domain rebuilding using the fallback sched domain added. This fixes various issues caused by confused scheduler putting tasks on a dead CPU, including the one reported by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
static void cpuset_hotplug_workfn(struct work_struct *work)
{
static cpumask_t new_cpus;
static nodemask_t new_mems;
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
bool cpus_updated, mems_updated;
bool on_dfl = cgroup_subsys_on_dfl(cpuset_cgrp_subsys);
mutex_lock(&cpuset_mutex);
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/* fetch the available cpus/mems and find out which changed how */
cpumask_copy(&new_cpus, cpu_active_mask);
new_mems = node_states[N_MEMORY];
cpus_updated = !cpumask_equal(top_cpuset.effective_cpus, &new_cpus);
mems_updated = !nodes_equal(top_cpuset.effective_mems, new_mems);
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/* synchronize cpus_allowed to cpu_active_mask */
if (cpus_updated) {
spin_lock_irq(&callback_lock);
if (!on_dfl)
cpumask_copy(top_cpuset.cpus_allowed, &new_cpus);
cpumask_copy(top_cpuset.effective_cpus, &new_cpus);
spin_unlock_irq(&callback_lock);
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/* we don't mess with cpumasks of tasks in top_cpuset */
}
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/* synchronize mems_allowed to N_MEMORY */
if (mems_updated) {
spin_lock_irq(&callback_lock);
if (!on_dfl)
top_cpuset.mems_allowed = new_mems;
top_cpuset.effective_mems = new_mems;
spin_unlock_irq(&callback_lock);
update_tasks_nodemask(&top_cpuset);
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
}
mutex_unlock(&cpuset_mutex);
/* if cpus or mems changed, we need to propagate to descendants */
if (cpus_updated || mems_updated) {
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
struct cpuset *cs;
2013-08-09 07:11:25 +07:00
struct cgroup_subsys_state *pos_css;
cpusets: update task's cpus_allowed and mems_allowed after CPU/NODE offline/online The bug is that a task may run on the cpu/node which is not in its cpuset.cpus/ cpuset.mems. It can be reproduced by the following commands: ----------------------------------- # mkdir /dev/cpuset # mount -t cpuset xxx /dev/cpuset # mkdir /dev/cpuset/0 # echo 0-1 > /dev/cpuset/0/cpus # echo 0 > /dev/cpuset/0/mems # echo $$ > /dev/cpuset/0/tasks # echo 0 > /sys/devices/system/cpu/cpu1/online # echo 1 > /sys/devices/system/cpu/cpu1/online ----------------------------------- There is only CPU0 in cpuset.cpus, but the task in this cpuset runs on both CPU0 and CPU1. It is because the task's cpu_allowed didn't get updated after we did CPU offline/online manipulation. Similar for mem_allowed. This patch fixes this bug expect for root cpuset. Because there is a problem about root cpuset, in that whether it is necessary to update all the tasks in root cpuset or not after cpu/node offline/online. If updating, some kernel threads which is bound into a specified cpu will be unbound. If not updating, there is a bug in root cpuset. This bug is also caused by offline/online manipulation. For example, there is a dual-cpu machine. we create a sub cpuset in root cpuset and assign 1 to its cpus. And then we attach some tasks into this sub cpuset. After this, we offline CPU1. Now, the tasks in this new cpuset are moved into root cpuset automatically because there is no cpu in sub cpuset. Then we online CPU1, we find all the tasks which doesn't belong to root cpuset originally just run on CPU0. Maybe we need to add a flag in the task_struct to mark which task can't be unbound? Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Acked-by: Paul Jackson <pj@sgi.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 15:47:22 +07:00
rcu_read_lock();
2013-08-09 07:11:25 +07:00
cpuset_for_each_descendant_pre(cs, pos_css, &top_cpuset) {
if (cs == &top_cpuset || !css_tryget_online(&cs->css))
continue;
rcu_read_unlock();
cpuset_hotplug_update_tasks(cs);
rcu_read_lock();
css_put(&cs->css);
}
rcu_read_unlock();
}
cpuset: reorganize CPU / memory hotplug handling Reorganize hotplug path to prepare for async hotplug handling. * Both CPU and memory hotplug handlings are collected into a single function - cpuset_handle_hotplug(). It doesn't take any argument but compares the current setttings of top_cpuset against what's actually available to determine what happened. This function directly updates top_cpuset. If there are CPUs or memory nodes which are taken down, cpuset_propagate_hotplug() in invoked on all !root cpusets. * cpuset_propagate_hotplug() is responsible for updating the specified cpuset so that it doesn't include any resource which isn't available to top_cpuset. If no CPU or memory is left after update, all tasks are moved to the nearest ancestor with both resources. * update_tasks_cpumask() and update_tasks_nodemask() are now always called after cpus or mems masks are updated even if the cpuset doesn't have any task. This is for brevity and not expected to have any measureable effect. * cpu_active_mask and N_HIGH_MEMORY are read exactly once per cpuset_handle_hotplug() invocation, all cpusets share the same view of what resources are available, and cpuset_handle_hotplug() can handle multiple resources going up and down. These properties will allow async operation. The reorganization, while drastic, is equivalent and shouldn't cause any behavior difference. This will enable making hotplug handling async and remove get_online_cpus() -> cgroup_mutex nesting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/* rebuild sched domains if cpus_allowed has changed */
if (cpus_updated)
rebuild_sched_domains();
}
void cpuset_update_active_cpus(void)
{
cpuset: don't nest cgroup_mutex inside get_online_cpus() CPU / memory hotplug path currently grabs cgroup_mutex from hotplug event notifications. We want to separate cpuset locking from cgroup core and make cgroup_mutex outer to hotplug synchronization so that, among other things, mechanisms which depend on get_online_cpus() can be used from cgroup callbacks. In general, we want to keep cgroup_mutex the outermost lock to minimize locking interactions among different controllers. Convert cpuset_handle_hotplug() to cpuset_hotplug_workfn() and schedule it from the hotplug notifications. As the function can already handle multiple mixed events without any input, converting it to a work function is mostly trivial; however, one complication is that cpuset_update_active_cpus() needs to update sched domains synchronously to reflect an offlined cpu to avoid confusing the scheduler. This is worked around by falling back to the the default single sched domain synchronously before scheduling the actual hotplug work. This makes sched domain rebuilt twice per CPU hotplug event but the operation isn't that heavy and a lot of the second operation would be noop for systems w/ single sched domain, which is the common case. This decouples cpuset hotplug handling from the notification callbacks and there can be an arbitrary delay between the actual event and updates to cpusets. Scheduler and mm can handle it fine but moving tasks out of an empty cpuset may race against writes to the cpuset restoring execution resources which can lead to confusing behavior. Flush hotplug work item from cpuset_write_resmask() to avoid such confusions. v2: Synchronous sched domain rebuilding using the fallback sched domain added. This fixes various issues caused by confused scheduler putting tasks on a dead CPU, including the one reported by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
/*
* We're inside cpu hotplug critical region which usually nests
* inside cgroup synchronization. Bounce actual hotplug processing
* to a work item to avoid reverse locking order.
*
* We still need to do partition_sched_domains() synchronously;
* otherwise, the scheduler will get confused and put tasks to the
* dead CPU. Fall back to the default single domain.
* cpuset_hotplug_workfn() will rebuild it as necessary.
*/
partition_sched_domains(1, NULL, NULL);
schedule_work(&cpuset_hotplug_work);
}
[PATCH] cpuset: top_cpuset tracks hotplug changes to node_online_map Change the list of memory nodes allowed to tasks in the top (root) nodeset to dynamically track what cpus are online, using a call to a cpuset hook from the memory hotplug code. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support memory hotplug, then these tasks cannot make use of memory nodes that are added after system boot, because the memory nodes are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. One key motivation for this change is to remain consistent with the behaviour for the top_cpuset's 'cpus', which is also read-only, and which automatically tracks the cpu_online_map. This change also has the minor benefit that it fixes a long standing, little noticed, minor bug in cpusets. The cpuset performance tweak to short circuit the cpuset_zone_allowed() check on systems with just a single cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply changing the 'mems' of the top_cpuset had no affect, even though the change (the write system call) appeared to succeed. With the following change, that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly refuses to be changed via user space writes. Thus no one should be mislead into thinking they've changed the top_cpusets's 'mems' when in affect they haven't. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'mems' file in the top (root) cpuset, making it read only, and making it automatically track the value of node_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged memory nodes allowed by their cpuset. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 16:01:16 +07:00
/*
* Keep top_cpuset.mems_allowed tracking node_states[N_MEMORY].
* Call this routine anytime after node_states[N_MEMORY] changes.
* See cpuset_update_active_cpus() for CPU hotplug handling.
[PATCH] cpuset: top_cpuset tracks hotplug changes to node_online_map Change the list of memory nodes allowed to tasks in the top (root) nodeset to dynamically track what cpus are online, using a call to a cpuset hook from the memory hotplug code. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support memory hotplug, then these tasks cannot make use of memory nodes that are added after system boot, because the memory nodes are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. One key motivation for this change is to remain consistent with the behaviour for the top_cpuset's 'cpus', which is also read-only, and which automatically tracks the cpu_online_map. This change also has the minor benefit that it fixes a long standing, little noticed, minor bug in cpusets. The cpuset performance tweak to short circuit the cpuset_zone_allowed() check on systems with just a single cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply changing the 'mems' of the top_cpuset had no affect, even though the change (the write system call) appeared to succeed. With the following change, that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly refuses to be changed via user space writes. Thus no one should be mislead into thinking they've changed the top_cpusets's 'mems' when in affect they haven't. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'mems' file in the top (root) cpuset, making it read only, and making it automatically track the value of node_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged memory nodes allowed by their cpuset. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 16:01:16 +07:00
*/
static int cpuset_track_online_nodes(struct notifier_block *self,
unsigned long action, void *arg)
[PATCH] cpuset: top_cpuset tracks hotplug changes to node_online_map Change the list of memory nodes allowed to tasks in the top (root) nodeset to dynamically track what cpus are online, using a call to a cpuset hook from the memory hotplug code. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support memory hotplug, then these tasks cannot make use of memory nodes that are added after system boot, because the memory nodes are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. One key motivation for this change is to remain consistent with the behaviour for the top_cpuset's 'cpus', which is also read-only, and which automatically tracks the cpu_online_map. This change also has the minor benefit that it fixes a long standing, little noticed, minor bug in cpusets. The cpuset performance tweak to short circuit the cpuset_zone_allowed() check on systems with just a single cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply changing the 'mems' of the top_cpuset had no affect, even though the change (the write system call) appeared to succeed. With the following change, that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly refuses to be changed via user space writes. Thus no one should be mislead into thinking they've changed the top_cpusets's 'mems' when in affect they haven't. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'mems' file in the top (root) cpuset, making it read only, and making it automatically track the value of node_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged memory nodes allowed by their cpuset. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 16:01:16 +07:00
{
cpuset: don't nest cgroup_mutex inside get_online_cpus() CPU / memory hotplug path currently grabs cgroup_mutex from hotplug event notifications. We want to separate cpuset locking from cgroup core and make cgroup_mutex outer to hotplug synchronization so that, among other things, mechanisms which depend on get_online_cpus() can be used from cgroup callbacks. In general, we want to keep cgroup_mutex the outermost lock to minimize locking interactions among different controllers. Convert cpuset_handle_hotplug() to cpuset_hotplug_workfn() and schedule it from the hotplug notifications. As the function can already handle multiple mixed events without any input, converting it to a work function is mostly trivial; however, one complication is that cpuset_update_active_cpus() needs to update sched domains synchronously to reflect an offlined cpu to avoid confusing the scheduler. This is worked around by falling back to the the default single sched domain synchronously before scheduling the actual hotplug work. This makes sched domain rebuilt twice per CPU hotplug event but the operation isn't that heavy and a lot of the second operation would be noop for systems w/ single sched domain, which is the common case. This decouples cpuset hotplug handling from the notification callbacks and there can be an arbitrary delay between the actual event and updates to cpusets. Scheduler and mm can handle it fine but moving tasks out of an empty cpuset may race against writes to the cpuset restoring execution resources which can lead to confusing behavior. Flush hotplug work item from cpuset_write_resmask() to avoid such confusions. v2: Synchronous sched domain rebuilding using the fallback sched domain added. This fixes various issues caused by confused scheduler putting tasks on a dead CPU, including the one reported by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-01-07 23:51:07 +07:00
schedule_work(&cpuset_hotplug_work);
return NOTIFY_OK;
[PATCH] cpuset: top_cpuset tracks hotplug changes to node_online_map Change the list of memory nodes allowed to tasks in the top (root) nodeset to dynamically track what cpus are online, using a call to a cpuset hook from the memory hotplug code. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support memory hotplug, then these tasks cannot make use of memory nodes that are added after system boot, because the memory nodes are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. One key motivation for this change is to remain consistent with the behaviour for the top_cpuset's 'cpus', which is also read-only, and which automatically tracks the cpu_online_map. This change also has the minor benefit that it fixes a long standing, little noticed, minor bug in cpusets. The cpuset performance tweak to short circuit the cpuset_zone_allowed() check on systems with just a single cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply changing the 'mems' of the top_cpuset had no affect, even though the change (the write system call) appeared to succeed. With the following change, that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly refuses to be changed via user space writes. Thus no one should be mislead into thinking they've changed the top_cpusets's 'mems' when in affect they haven't. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'mems' file in the top (root) cpuset, making it read only, and making it automatically track the value of node_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged memory nodes allowed by their cpuset. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 16:01:16 +07:00
}
static struct notifier_block cpuset_track_online_nodes_nb = {
.notifier_call = cpuset_track_online_nodes,
.priority = 10, /* ??! */
};
[PATCH] cpuset: top_cpuset tracks hotplug changes to node_online_map Change the list of memory nodes allowed to tasks in the top (root) nodeset to dynamically track what cpus are online, using a call to a cpuset hook from the memory hotplug code. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support memory hotplug, then these tasks cannot make use of memory nodes that are added after system boot, because the memory nodes are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. One key motivation for this change is to remain consistent with the behaviour for the top_cpuset's 'cpus', which is also read-only, and which automatically tracks the cpu_online_map. This change also has the minor benefit that it fixes a long standing, little noticed, minor bug in cpusets. The cpuset performance tweak to short circuit the cpuset_zone_allowed() check on systems with just a single cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply changing the 'mems' of the top_cpuset had no affect, even though the change (the write system call) appeared to succeed. With the following change, that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly refuses to be changed via user space writes. Thus no one should be mislead into thinking they've changed the top_cpusets's 'mems' when in affect they haven't. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'mems' file in the top (root) cpuset, making it read only, and making it automatically track the value of node_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged memory nodes allowed by their cpuset. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 16:01:16 +07:00
/**
* cpuset_init_smp - initialize cpus_allowed
*
* Description: Finish top cpuset after cpu, node maps are initialized
*/
void __init cpuset_init_smp(void)
{
cpumask_copy(top_cpuset.cpus_allowed, cpu_active_mask);
top_cpuset.mems_allowed = node_states[N_MEMORY];
top_cpuset.old_mems_allowed = top_cpuset.mems_allowed;
cpumask_copy(top_cpuset.effective_cpus, cpu_active_mask);
top_cpuset.effective_mems = node_states[N_MEMORY];
register_hotmemory_notifier(&cpuset_track_online_nodes_nb);
cpuset_migrate_mm_wq = alloc_ordered_workqueue("cpuset_migrate_mm", 0);
BUG_ON(!cpuset_migrate_mm_wq);
}
/**
* cpuset_cpus_allowed - return cpus_allowed mask from a tasks cpuset.
* @tsk: pointer to task_struct from which to obtain cpuset->cpus_allowed.
* @pmask: pointer to struct cpumask variable to receive cpus_allowed set.
*
* Description: Returns the cpumask_var_t cpus_allowed of the cpuset
* attached to the specified @tsk. Guaranteed to return some non-empty
* subset of cpu_online_mask, even if this means going outside the
* tasks cpuset.
**/
void cpuset_cpus_allowed(struct task_struct *tsk, struct cpumask *pmask)
{
unsigned long flags;
spin_lock_irqsave(&callback_lock, flags);
rcu_read_lock();
guarantee_online_cpus(task_cs(tsk), pmask);
rcu_read_unlock();
spin_unlock_irqrestore(&callback_lock, flags);
}
sched: Fix select_fallback_rq() vs cpu_active/cpu_online Commit 5fbd036b55 ("sched: Cleanup cpu_active madness"), which was supposed to finally sort the cpu_active mess, instead uncovered more. Since CPU_STARTING is ran before setting the cpu online, there's a (small) window where the cpu has active,!online. If during this time there's a wakeup of a task that used to reside on that cpu select_task_rq() will use select_fallback_rq() to compute an alternative cpu to run on since we find !online. select_fallback_rq() however will compute the new cpu against cpu_active, this means that it can return the same cpu it started out with, the !online one, since that cpu is in fact marked active. This results in us trying to scheduling a task on an offline cpu and triggering a WARN in the IPI code. The solution proposed by Chuansheng Liu of setting cpu_active in set_cpu_online() is buggy, firstly not all archs actually use set_cpu_online(), secondly, not all archs call set_cpu_online() with IRQs disabled, this means we would introduce either the same race or the race from fd8a7de17 ("x86: cpu-hotplug: Prevent softirq wakeup on wrong CPU") -- albeit much narrower. [ By setting online first and active later we have a window of online,!active, fresh and bound kthreads have task_cpu() of 0 and since cpu0 isn't in tsk_cpus_allowed() we end up in select_fallback_rq() which excludes !active, resulting in a reset of ->cpus_allowed and the thread running all over the place. ] The solution is to re-work select_fallback_rq() to require active _and_ online. This makes the active,!online case work as expected, OTOH archs running CPU_STARTING after setting online are now vulnerable to the issue from fd8a7de17 -- these are alpha and blackfin. Reported-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Frysinger <vapier@gentoo.org> Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/n/tip-hubqk1i10o4dpvlm06gq7v6j@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-20 21:57:01 +07:00
void cpuset_cpus_allowed_fallback(struct task_struct *tsk)
{
rcu_read_lock();
do_set_cpus_allowed(tsk, task_cs(tsk)->effective_cpus);
rcu_read_unlock();
/*
* We own tsk->cpus_allowed, nobody can change it under us.
*
* But we used cs && cs->cpus_allowed lockless and thus can
* race with cgroup_attach_task() or update_cpumask() and get
* the wrong tsk->cpus_allowed. However, both cases imply the
* subsequent cpuset_change_cpumask()->set_cpus_allowed_ptr()
* which takes task_rq_lock().
*
* If we are called after it dropped the lock we must see all
* changes in tsk_cs()->cpus_allowed. Otherwise we can temporary
* set any mask even if it is not right from task_cs() pov,
* the pending set_cpus_allowed_ptr() will fix things.
sched: Fix select_fallback_rq() vs cpu_active/cpu_online Commit 5fbd036b55 ("sched: Cleanup cpu_active madness"), which was supposed to finally sort the cpu_active mess, instead uncovered more. Since CPU_STARTING is ran before setting the cpu online, there's a (small) window where the cpu has active,!online. If during this time there's a wakeup of a task that used to reside on that cpu select_task_rq() will use select_fallback_rq() to compute an alternative cpu to run on since we find !online. select_fallback_rq() however will compute the new cpu against cpu_active, this means that it can return the same cpu it started out with, the !online one, since that cpu is in fact marked active. This results in us trying to scheduling a task on an offline cpu and triggering a WARN in the IPI code. The solution proposed by Chuansheng Liu of setting cpu_active in set_cpu_online() is buggy, firstly not all archs actually use set_cpu_online(), secondly, not all archs call set_cpu_online() with IRQs disabled, this means we would introduce either the same race or the race from fd8a7de17 ("x86: cpu-hotplug: Prevent softirq wakeup on wrong CPU") -- albeit much narrower. [ By setting online first and active later we have a window of online,!active, fresh and bound kthreads have task_cpu() of 0 and since cpu0 isn't in tsk_cpus_allowed() we end up in select_fallback_rq() which excludes !active, resulting in a reset of ->cpus_allowed and the thread running all over the place. ] The solution is to re-work select_fallback_rq() to require active _and_ online. This makes the active,!online case work as expected, OTOH archs running CPU_STARTING after setting online are now vulnerable to the issue from fd8a7de17 -- these are alpha and blackfin. Reported-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Frysinger <vapier@gentoo.org> Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/n/tip-hubqk1i10o4dpvlm06gq7v6j@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-20 21:57:01 +07:00
*
* select_fallback_rq() will fix things ups and set cpu_possible_mask
* if required.
*/
}
void __init cpuset_init_current_mems_allowed(void)
{
nodes_setall(current->mems_allowed);
}
/**
* cpuset_mems_allowed - return mems_allowed mask from a tasks cpuset.
* @tsk: pointer to task_struct from which to obtain cpuset->mems_allowed.
*
* Description: Returns the nodemask_t mems_allowed of the cpuset
* attached to the specified @tsk. Guaranteed to return some non-empty
* subset of node_states[N_MEMORY], even if this means going outside the
* tasks cpuset.
**/
nodemask_t cpuset_mems_allowed(struct task_struct *tsk)
{
nodemask_t mask;
unsigned long flags;
spin_lock_irqsave(&callback_lock, flags);
rcu_read_lock();
guarantee_online_mems(task_cs(tsk), &mask);
rcu_read_unlock();
spin_unlock_irqrestore(&callback_lock, flags);
return mask;
}
/**
* cpuset_nodemask_valid_mems_allowed - check nodemask vs. curremt mems_allowed
* @nodemask: the nodemask to be checked
*
* Are any of the nodes in the nodemask allowed in current->mems_allowed?
*/
int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask)
{
return nodes_intersects(*nodemask, current->mems_allowed);
}
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
/*
* nearest_hardwall_ancestor() - Returns the nearest mem_exclusive or
* mem_hardwall ancestor to the specified cpuset. Call holding
* callback_lock. If no ancestor is mem_exclusive or mem_hardwall
* (an unusual configuration), then returns the root cpuset.
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
*/
static struct cpuset *nearest_hardwall_ancestor(struct cpuset *cs)
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
{
while (!(is_mem_exclusive(cs) || is_mem_hardwall(cs)) && parent_cs(cs))
cs = parent_cs(cs);
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
return cs;
}
/**
* cpuset_node_allowed - Can we allocate on a memory node?
* @node: is this an allowed node?
[PATCH] cpuset: rework cpuset_zone_allowed api Elaborate the API for calling cpuset_zone_allowed(), so that users have to explicitly choose between the two variants: cpuset_zone_allowed_hardwall() cpuset_zone_allowed_softwall() Until now, whether or not you got the hardwall flavor depended solely on whether or not you or'd in the __GFP_HARDWALL gfp flag to the gfp_mask argument. If you didn't specify __GFP_HARDWALL, you implicitly got the softwall version. Unfortunately, this meant that users would end up with the softwall version without thinking about it. Since only the softwall version might sleep, this led to bugs with possible sleeping in interrupt context on more than one occassion. The hardwall version requires that the current tasks mems_allowed allows the node of the specified zone (or that you're in interrupt or that __GFP_THISNODE is set or that you're on a one cpuset system.) The softwall version, depending on the gfp_mask, might allow a node if it was allowed in the nearest enclusing cpuset marked mem_exclusive (which requires taking the cpuset lock 'callback_mutex' to evaluate.) This patch removes the cpuset_zone_allowed() call, and forces the caller to explicitly choose between the hardwall and the softwall case. If the caller wants the gfp_mask to determine this choice, they should (1) be sure they can sleep or that __GFP_HARDWALL is set, and (2) invoke the cpuset_zone_allowed_softwall() routine. This adds another 100 or 200 bytes to the kernel text space, due to the few lines of nearly duplicate code at the top of both cpuset_zone_allowed_* routines. It should save a few instructions executed for the calls that turned into calls of cpuset_zone_allowed_hardwall, thanks to not having to set (before the call) then check (within the call) the __GFP_HARDWALL flag. For the most critical call, from get_page_from_freelist(), the same instructions are executed as before -- the old cpuset_zone_allowed() routine it used to call is the same code as the cpuset_zone_allowed_softwall() routine that it calls now. Not a perfect win, but seems worth it, to reduce this chance of hitting a sleeping with irq off complaint again. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 15:34:25 +07:00
* @gfp_mask: memory allocation flags
*
* If we're in interrupt, yes, we can always allocate. If @node is set in
* current's mems_allowed, yes. If it's not a __GFP_HARDWALL request and this
* node is set in the nearest hardwalled cpuset ancestor to current's cpuset,
* yes. If current has access to memory reserves due to TIF_MEMDIE, yes.
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
* Otherwise, no.
*
* GFP_USER allocations are marked with the __GFP_HARDWALL bit,
* and do not allow allocations outside the current tasks cpuset
* unless the task has been OOM killed as is marked TIF_MEMDIE.
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
* GFP_KERNEL allocations are not so marked, so can escape to the
* nearest enclosing hardwalled ancestor cpuset.
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
*
* Scanning up parent cpusets requires callback_lock. The
[PATCH] cpuset: rework cpuset_zone_allowed api Elaborate the API for calling cpuset_zone_allowed(), so that users have to explicitly choose between the two variants: cpuset_zone_allowed_hardwall() cpuset_zone_allowed_softwall() Until now, whether or not you got the hardwall flavor depended solely on whether or not you or'd in the __GFP_HARDWALL gfp flag to the gfp_mask argument. If you didn't specify __GFP_HARDWALL, you implicitly got the softwall version. Unfortunately, this meant that users would end up with the softwall version without thinking about it. Since only the softwall version might sleep, this led to bugs with possible sleeping in interrupt context on more than one occassion. The hardwall version requires that the current tasks mems_allowed allows the node of the specified zone (or that you're in interrupt or that __GFP_THISNODE is set or that you're on a one cpuset system.) The softwall version, depending on the gfp_mask, might allow a node if it was allowed in the nearest enclusing cpuset marked mem_exclusive (which requires taking the cpuset lock 'callback_mutex' to evaluate.) This patch removes the cpuset_zone_allowed() call, and forces the caller to explicitly choose between the hardwall and the softwall case. If the caller wants the gfp_mask to determine this choice, they should (1) be sure they can sleep or that __GFP_HARDWALL is set, and (2) invoke the cpuset_zone_allowed_softwall() routine. This adds another 100 or 200 bytes to the kernel text space, due to the few lines of nearly duplicate code at the top of both cpuset_zone_allowed_* routines. It should save a few instructions executed for the calls that turned into calls of cpuset_zone_allowed_hardwall, thanks to not having to set (before the call) then check (within the call) the __GFP_HARDWALL flag. For the most critical call, from get_page_from_freelist(), the same instructions are executed as before -- the old cpuset_zone_allowed() routine it used to call is the same code as the cpuset_zone_allowed_softwall() routine that it calls now. Not a perfect win, but seems worth it, to reduce this chance of hitting a sleeping with irq off complaint again. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 15:34:25 +07:00
* __alloc_pages() routine only calls here with __GFP_HARDWALL bit
* _not_ set if it's a GFP_KERNEL allocation, and all nodes in the
* current tasks mems_allowed came up empty on the first pass over
* the zonelist. So only GFP_KERNEL allocations, if all nodes in the
* cpuset are short of memory, might require taking the callback_lock.
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
*
* The first call here from mm/page_alloc:get_page_from_freelist()
[PATCH] cpuset: rework cpuset_zone_allowed api Elaborate the API for calling cpuset_zone_allowed(), so that users have to explicitly choose between the two variants: cpuset_zone_allowed_hardwall() cpuset_zone_allowed_softwall() Until now, whether or not you got the hardwall flavor depended solely on whether or not you or'd in the __GFP_HARDWALL gfp flag to the gfp_mask argument. If you didn't specify __GFP_HARDWALL, you implicitly got the softwall version. Unfortunately, this meant that users would end up with the softwall version without thinking about it. Since only the softwall version might sleep, this led to bugs with possible sleeping in interrupt context on more than one occassion. The hardwall version requires that the current tasks mems_allowed allows the node of the specified zone (or that you're in interrupt or that __GFP_THISNODE is set or that you're on a one cpuset system.) The softwall version, depending on the gfp_mask, might allow a node if it was allowed in the nearest enclusing cpuset marked mem_exclusive (which requires taking the cpuset lock 'callback_mutex' to evaluate.) This patch removes the cpuset_zone_allowed() call, and forces the caller to explicitly choose between the hardwall and the softwall case. If the caller wants the gfp_mask to determine this choice, they should (1) be sure they can sleep or that __GFP_HARDWALL is set, and (2) invoke the cpuset_zone_allowed_softwall() routine. This adds another 100 or 200 bytes to the kernel text space, due to the few lines of nearly duplicate code at the top of both cpuset_zone_allowed_* routines. It should save a few instructions executed for the calls that turned into calls of cpuset_zone_allowed_hardwall, thanks to not having to set (before the call) then check (within the call) the __GFP_HARDWALL flag. For the most critical call, from get_page_from_freelist(), the same instructions are executed as before -- the old cpuset_zone_allowed() routine it used to call is the same code as the cpuset_zone_allowed_softwall() routine that it calls now. Not a perfect win, but seems worth it, to reduce this chance of hitting a sleeping with irq off complaint again. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 15:34:25 +07:00
* has __GFP_HARDWALL set in gfp_mask, enforcing hardwall cpusets,
* so no allocation on a node outside the cpuset is allowed (unless
* in interrupt, of course).
*
* The second pass through get_page_from_freelist() doesn't even call
* here for GFP_ATOMIC calls. For those calls, the __alloc_pages()
* variable 'wait' is not set, and the bit ALLOC_CPUSET is not set
* in alloc_flags. That logic and the checks below have the combined
* affect that:
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
* in_interrupt - any node ok (current task context irrelevant)
* GFP_ATOMIC - any node ok
* TIF_MEMDIE - any node ok
* GFP_KERNEL - any node in enclosing hardwalled cpuset ok
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
* GFP_USER - only nodes in current tasks mems allowed ok.
[PATCH] cpuset: rework cpuset_zone_allowed api Elaborate the API for calling cpuset_zone_allowed(), so that users have to explicitly choose between the two variants: cpuset_zone_allowed_hardwall() cpuset_zone_allowed_softwall() Until now, whether or not you got the hardwall flavor depended solely on whether or not you or'd in the __GFP_HARDWALL gfp flag to the gfp_mask argument. If you didn't specify __GFP_HARDWALL, you implicitly got the softwall version. Unfortunately, this meant that users would end up with the softwall version without thinking about it. Since only the softwall version might sleep, this led to bugs with possible sleeping in interrupt context on more than one occassion. The hardwall version requires that the current tasks mems_allowed allows the node of the specified zone (or that you're in interrupt or that __GFP_THISNODE is set or that you're on a one cpuset system.) The softwall version, depending on the gfp_mask, might allow a node if it was allowed in the nearest enclusing cpuset marked mem_exclusive (which requires taking the cpuset lock 'callback_mutex' to evaluate.) This patch removes the cpuset_zone_allowed() call, and forces the caller to explicitly choose between the hardwall and the softwall case. If the caller wants the gfp_mask to determine this choice, they should (1) be sure they can sleep or that __GFP_HARDWALL is set, and (2) invoke the cpuset_zone_allowed_softwall() routine. This adds another 100 or 200 bytes to the kernel text space, due to the few lines of nearly duplicate code at the top of both cpuset_zone_allowed_* routines. It should save a few instructions executed for the calls that turned into calls of cpuset_zone_allowed_hardwall, thanks to not having to set (before the call) then check (within the call) the __GFP_HARDWALL flag. For the most critical call, from get_page_from_freelist(), the same instructions are executed as before -- the old cpuset_zone_allowed() routine it used to call is the same code as the cpuset_zone_allowed_softwall() routine that it calls now. Not a perfect win, but seems worth it, to reduce this chance of hitting a sleeping with irq off complaint again. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 15:34:25 +07:00
*/
cpuset: use static key better and convert to new API An important function for cpusets is cpuset_node_allowed(), which optimizes on the fact if there's a single root CPU set, it must be trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the cpusets_enabled_key static key the right way where static keys eliminate branching overhead with jump labels. This patch converts it so that static key is used properly. It's also switched to the new static key API and the checking functions are converted to return bool instead of int. We also provide a new variant __cpuset_zone_allowed() which expects that the static key check was already done and they key was enabled. This is needed for get_page_from_freelist() where we want to also avoid the relatively slower check when ALLOC_CPUSET is not set in alloc_flags. The impact on the page allocator microbenchmark is less than expected but the cleanup in itself is worthwhile. 4.6.0-rc2 4.6.0-rc2 multcheck-v1r20 cpuset-v1r20 Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%) Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%) Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%) Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%) Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%) Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%) Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%) Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%) Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%) Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%) Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%) Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%) Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%) Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%) Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Zefan Li <lizefan@huawei.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:14:30 +07:00
bool __cpuset_node_allowed(int node, gfp_t gfp_mask)
{
struct cpuset *cs; /* current cpuset ancestors */
int allowed; /* is allocation in zone z allowed? */
unsigned long flags;
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
if (in_interrupt())
cpuset: use static key better and convert to new API An important function for cpusets is cpuset_node_allowed(), which optimizes on the fact if there's a single root CPU set, it must be trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the cpusets_enabled_key static key the right way where static keys eliminate branching overhead with jump labels. This patch converts it so that static key is used properly. It's also switched to the new static key API and the checking functions are converted to return bool instead of int. We also provide a new variant __cpuset_zone_allowed() which expects that the static key check was already done and they key was enabled. This is needed for get_page_from_freelist() where we want to also avoid the relatively slower check when ALLOC_CPUSET is not set in alloc_flags. The impact on the page allocator microbenchmark is less than expected but the cleanup in itself is worthwhile. 4.6.0-rc2 4.6.0-rc2 multcheck-v1r20 cpuset-v1r20 Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%) Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%) Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%) Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%) Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%) Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%) Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%) Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%) Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%) Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%) Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%) Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%) Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%) Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%) Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Zefan Li <lizefan@huawei.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:14:30 +07:00
return true;
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
if (node_isset(node, current->mems_allowed))
cpuset: use static key better and convert to new API An important function for cpusets is cpuset_node_allowed(), which optimizes on the fact if there's a single root CPU set, it must be trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the cpusets_enabled_key static key the right way where static keys eliminate branching overhead with jump labels. This patch converts it so that static key is used properly. It's also switched to the new static key API and the checking functions are converted to return bool instead of int. We also provide a new variant __cpuset_zone_allowed() which expects that the static key check was already done and they key was enabled. This is needed for get_page_from_freelist() where we want to also avoid the relatively slower check when ALLOC_CPUSET is not set in alloc_flags. The impact on the page allocator microbenchmark is less than expected but the cleanup in itself is worthwhile. 4.6.0-rc2 4.6.0-rc2 multcheck-v1r20 cpuset-v1r20 Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%) Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%) Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%) Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%) Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%) Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%) Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%) Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%) Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%) Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%) Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%) Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%) Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%) Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%) Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Zefan Li <lizefan@huawei.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:14:30 +07:00
return true;
/*
* Allow tasks that have access to memory reserves because they have
* been OOM killed to get memory anywhere.
*/
if (unlikely(test_thread_flag(TIF_MEMDIE)))
cpuset: use static key better and convert to new API An important function for cpusets is cpuset_node_allowed(), which optimizes on the fact if there's a single root CPU set, it must be trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the cpusets_enabled_key static key the right way where static keys eliminate branching overhead with jump labels. This patch converts it so that static key is used properly. It's also switched to the new static key API and the checking functions are converted to return bool instead of int. We also provide a new variant __cpuset_zone_allowed() which expects that the static key check was already done and they key was enabled. This is needed for get_page_from_freelist() where we want to also avoid the relatively slower check when ALLOC_CPUSET is not set in alloc_flags. The impact on the page allocator microbenchmark is less than expected but the cleanup in itself is worthwhile. 4.6.0-rc2 4.6.0-rc2 multcheck-v1r20 cpuset-v1r20 Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%) Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%) Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%) Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%) Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%) Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%) Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%) Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%) Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%) Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%) Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%) Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%) Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%) Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%) Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Zefan Li <lizefan@huawei.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:14:30 +07:00
return true;
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
if (gfp_mask & __GFP_HARDWALL) /* If hardwall request, stop here */
cpuset: use static key better and convert to new API An important function for cpusets is cpuset_node_allowed(), which optimizes on the fact if there's a single root CPU set, it must be trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the cpusets_enabled_key static key the right way where static keys eliminate branching overhead with jump labels. This patch converts it so that static key is used properly. It's also switched to the new static key API and the checking functions are converted to return bool instead of int. We also provide a new variant __cpuset_zone_allowed() which expects that the static key check was already done and they key was enabled. This is needed for get_page_from_freelist() where we want to also avoid the relatively slower check when ALLOC_CPUSET is not set in alloc_flags. The impact on the page allocator microbenchmark is less than expected but the cleanup in itself is worthwhile. 4.6.0-rc2 4.6.0-rc2 multcheck-v1r20 cpuset-v1r20 Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%) Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%) Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%) Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%) Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%) Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%) Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%) Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%) Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%) Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%) Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%) Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%) Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%) Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%) Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Zefan Li <lizefan@huawei.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:14:30 +07:00
return false;
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
if (current->flags & PF_EXITING) /* Let dying task have memory */
cpuset: use static key better and convert to new API An important function for cpusets is cpuset_node_allowed(), which optimizes on the fact if there's a single root CPU set, it must be trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the cpusets_enabled_key static key the right way where static keys eliminate branching overhead with jump labels. This patch converts it so that static key is used properly. It's also switched to the new static key API and the checking functions are converted to return bool instead of int. We also provide a new variant __cpuset_zone_allowed() which expects that the static key check was already done and they key was enabled. This is needed for get_page_from_freelist() where we want to also avoid the relatively slower check when ALLOC_CPUSET is not set in alloc_flags. The impact on the page allocator microbenchmark is less than expected but the cleanup in itself is worthwhile. 4.6.0-rc2 4.6.0-rc2 multcheck-v1r20 cpuset-v1r20 Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%) Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%) Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%) Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%) Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%) Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%) Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%) Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%) Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%) Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%) Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%) Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%) Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%) Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%) Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Zefan Li <lizefan@huawei.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:14:30 +07:00
return true;
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
/* Not hardwall and node outside mems_allowed: scan up cpusets */
spin_lock_irqsave(&callback_lock, flags);
[PATCH] cpusets: dual semaphore locking overhaul Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:30 +07:00
rcu_read_lock();
cs = nearest_hardwall_ancestor(task_cs(current));
allowed = node_isset(node, cs->mems_allowed);
rcu_read_unlock();
[PATCH] cpusets: dual semaphore locking overhaul Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:30 +07:00
spin_unlock_irqrestore(&callback_lock, flags);
[PATCH] cpusets: formalize intermediate GFP_KERNEL containment This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:12 +07:00
return allowed;
}
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
/**
cpusets: new round-robin rotor for SLAB allocations We have observed several workloads running on multi-node systems where memory is assigned unevenly across the nodes in the system. There are numerous reasons for this but one is the round-robin rotor in cpuset_mem_spread_node(). For example, a simple test that writes a multi-page file will allocate pages on nodes 0 2 4 6 ... Odd nodes are skipped. (Sometimes it allocates on odd nodes & skips even nodes). An example is shown below. The program "lfile" writes a file consisting of 10 pages. The program then mmaps the file & uses get_mempolicy(..., MPOL_F_NODE) to determine the nodes where the file pages were allocated. The output is shown below: # ./lfile allocated on nodes: 2 4 6 0 1 2 6 0 2 There is a single rotor that is used for allocating both file pages & slab pages. Writing the file allocates both a data page & a slab page (buffer_head). This advances the RR rotor 2 nodes for each page allocated. A quick confirmation seems to confirm this is the cause of the uneven allocation: # echo 0 >/dev/cpuset/memory_spread_slab # ./lfile allocated on nodes: 6 7 8 9 0 1 2 3 4 5 This patch introduces a second rotor that is used for slab allocations. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Paul Menage <menage@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 04:42:49 +07:00
* cpuset_mem_spread_node() - On which node to begin search for a file page
* cpuset_slab_spread_node() - On which node to begin search for a slab page
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
*
* If a task is marked PF_SPREAD_PAGE or PF_SPREAD_SLAB (as for
* tasks in a cpuset with is_spread_page or is_spread_slab set),
* and if the memory allocation used cpuset_mem_spread_node()
* to determine on which node to start looking, as it will for
* certain page cache or slab cache pages such as used for file
* system buffers and inode caches, then instead of starting on the
* local node to look for a free page, rather spread the starting
* node around the tasks mems_allowed nodes.
*
* We don't have to worry about the returned node being offline
* because "it can't happen", and even if it did, it would be ok.
*
* The routines calling guarantee_online_mems() are careful to
* only set nodes in task->mems_allowed that are online. So it
* should not be possible for the following code to return an
* offline node. But if it did, that would be ok, as this routine
* is not returning the node where the allocation must be, only
* the node where the search should start. The zonelist passed to
* __alloc_pages() will include all nodes. If the slab allocator
* is passed an offline node, it will fall back to the local node.
* See kmem_cache_alloc_node().
*/
cpusets: new round-robin rotor for SLAB allocations We have observed several workloads running on multi-node systems where memory is assigned unevenly across the nodes in the system. There are numerous reasons for this but one is the round-robin rotor in cpuset_mem_spread_node(). For example, a simple test that writes a multi-page file will allocate pages on nodes 0 2 4 6 ... Odd nodes are skipped. (Sometimes it allocates on odd nodes & skips even nodes). An example is shown below. The program "lfile" writes a file consisting of 10 pages. The program then mmaps the file & uses get_mempolicy(..., MPOL_F_NODE) to determine the nodes where the file pages were allocated. The output is shown below: # ./lfile allocated on nodes: 2 4 6 0 1 2 6 0 2 There is a single rotor that is used for allocating both file pages & slab pages. Writing the file allocates both a data page & a slab page (buffer_head). This advances the RR rotor 2 nodes for each page allocated. A quick confirmation seems to confirm this is the cause of the uneven allocation: # echo 0 >/dev/cpuset/memory_spread_slab # ./lfile allocated on nodes: 6 7 8 9 0 1 2 3 4 5 This patch introduces a second rotor that is used for slab allocations. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Paul Menage <menage@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 04:42:49 +07:00
static int cpuset_spread_node(int *rotor)
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
{
return *rotor = next_node_in(*rotor, current->mems_allowed);
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
}
cpusets: new round-robin rotor for SLAB allocations We have observed several workloads running on multi-node systems where memory is assigned unevenly across the nodes in the system. There are numerous reasons for this but one is the round-robin rotor in cpuset_mem_spread_node(). For example, a simple test that writes a multi-page file will allocate pages on nodes 0 2 4 6 ... Odd nodes are skipped. (Sometimes it allocates on odd nodes & skips even nodes). An example is shown below. The program "lfile" writes a file consisting of 10 pages. The program then mmaps the file & uses get_mempolicy(..., MPOL_F_NODE) to determine the nodes where the file pages were allocated. The output is shown below: # ./lfile allocated on nodes: 2 4 6 0 1 2 6 0 2 There is a single rotor that is used for allocating both file pages & slab pages. Writing the file allocates both a data page & a slab page (buffer_head). This advances the RR rotor 2 nodes for each page allocated. A quick confirmation seems to confirm this is the cause of the uneven allocation: # echo 0 >/dev/cpuset/memory_spread_slab # ./lfile allocated on nodes: 6 7 8 9 0 1 2 3 4 5 This patch introduces a second rotor that is used for slab allocations. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Paul Menage <menage@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 04:42:49 +07:00
int cpuset_mem_spread_node(void)
{
cpusets: randomize node rotor used in cpuset_mem_spread_node() [ This patch has already been accepted as commit 0ac0c0d0f837 but later reverted (commit 35926ff5fba8) because it itroduced arch specific __node_random which was defined only for x86 code so it broke other archs. This is a followup without any arch specific code. Other than that there are no functional changes.] Some workloads that create a large number of small files tend to assign too many pages to node 0 (multi-node systems). Part of the reason is that the rotor (in cpuset_mem_spread_node()) used to assign nodes starts at node 0 for newly created tasks. This patch changes the rotor to be initialized to a random node number of the cpuset. [akpm@linux-foundation.org: fix layout] [Lee.Schermerhorn@hp.com: Define stub numa_random() for !NUMA configuration] [mhocko@suse.cz: Make it arch independent] [akpm@linux-foundation.org: fix CONFIG_NUMA=y, MAX_NUMNODES>1 build] Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Paul Menage <menage@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Menage <menage@google.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 06:08:30 +07:00
if (current->cpuset_mem_spread_rotor == NUMA_NO_NODE)
current->cpuset_mem_spread_rotor =
node_random(&current->mems_allowed);
cpusets: new round-robin rotor for SLAB allocations We have observed several workloads running on multi-node systems where memory is assigned unevenly across the nodes in the system. There are numerous reasons for this but one is the round-robin rotor in cpuset_mem_spread_node(). For example, a simple test that writes a multi-page file will allocate pages on nodes 0 2 4 6 ... Odd nodes are skipped. (Sometimes it allocates on odd nodes & skips even nodes). An example is shown below. The program "lfile" writes a file consisting of 10 pages. The program then mmaps the file & uses get_mempolicy(..., MPOL_F_NODE) to determine the nodes where the file pages were allocated. The output is shown below: # ./lfile allocated on nodes: 2 4 6 0 1 2 6 0 2 There is a single rotor that is used for allocating both file pages & slab pages. Writing the file allocates both a data page & a slab page (buffer_head). This advances the RR rotor 2 nodes for each page allocated. A quick confirmation seems to confirm this is the cause of the uneven allocation: # echo 0 >/dev/cpuset/memory_spread_slab # ./lfile allocated on nodes: 6 7 8 9 0 1 2 3 4 5 This patch introduces a second rotor that is used for slab allocations. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Paul Menage <menage@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 04:42:49 +07:00
return cpuset_spread_node(&current->cpuset_mem_spread_rotor);
}
int cpuset_slab_spread_node(void)
{
cpusets: randomize node rotor used in cpuset_mem_spread_node() [ This patch has already been accepted as commit 0ac0c0d0f837 but later reverted (commit 35926ff5fba8) because it itroduced arch specific __node_random which was defined only for x86 code so it broke other archs. This is a followup without any arch specific code. Other than that there are no functional changes.] Some workloads that create a large number of small files tend to assign too many pages to node 0 (multi-node systems). Part of the reason is that the rotor (in cpuset_mem_spread_node()) used to assign nodes starts at node 0 for newly created tasks. This patch changes the rotor to be initialized to a random node number of the cpuset. [akpm@linux-foundation.org: fix layout] [Lee.Schermerhorn@hp.com: Define stub numa_random() for !NUMA configuration] [mhocko@suse.cz: Make it arch independent] [akpm@linux-foundation.org: fix CONFIG_NUMA=y, MAX_NUMNODES>1 build] Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Paul Menage <menage@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Menage <menage@google.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 06:08:30 +07:00
if (current->cpuset_slab_spread_rotor == NUMA_NO_NODE)
current->cpuset_slab_spread_rotor =
node_random(&current->mems_allowed);
cpusets: new round-robin rotor for SLAB allocations We have observed several workloads running on multi-node systems where memory is assigned unevenly across the nodes in the system. There are numerous reasons for this but one is the round-robin rotor in cpuset_mem_spread_node(). For example, a simple test that writes a multi-page file will allocate pages on nodes 0 2 4 6 ... Odd nodes are skipped. (Sometimes it allocates on odd nodes & skips even nodes). An example is shown below. The program "lfile" writes a file consisting of 10 pages. The program then mmaps the file & uses get_mempolicy(..., MPOL_F_NODE) to determine the nodes where the file pages were allocated. The output is shown below: # ./lfile allocated on nodes: 2 4 6 0 1 2 6 0 2 There is a single rotor that is used for allocating both file pages & slab pages. Writing the file allocates both a data page & a slab page (buffer_head). This advances the RR rotor 2 nodes for each page allocated. A quick confirmation seems to confirm this is the cause of the uneven allocation: # echo 0 >/dev/cpuset/memory_spread_slab # ./lfile allocated on nodes: 6 7 8 9 0 1 2 3 4 5 This patch introduces a second rotor that is used for slab allocations. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Paul Menage <menage@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 04:42:49 +07:00
return cpuset_spread_node(&current->cpuset_slab_spread_rotor);
}
[PATCH] cpuset memory spread basic implementation This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 18:16:03 +07:00
EXPORT_SYMBOL_GPL(cpuset_mem_spread_node);
/**
* cpuset_mems_allowed_intersects - Does @tsk1's mems_allowed intersect @tsk2's?
* @tsk1: pointer to task_struct of some task.
* @tsk2: pointer to task_struct of some other task.
*
* Description: Return true if @tsk1's mems_allowed intersects the
* mems_allowed of @tsk2. Used by the OOM killer to determine if
* one of the task's memory usage might impact the memory available
* to the other.
**/
int cpuset_mems_allowed_intersects(const struct task_struct *tsk1,
const struct task_struct *tsk2)
{
return nodes_intersects(tsk1->mems_allowed, tsk2->mems_allowed);
}
/**
* cpuset_print_current_mems_allowed - prints current's cpuset and mems_allowed
*
* Description: Prints current's name, cpuset name, and cached copy of its
* mems_allowed to the kernel log.
*/
void cpuset_print_current_mems_allowed(void)
{
struct cgroup *cgrp;
rcu_read_lock();
cgrp = task_cs(current)->css.cgroup;
pr_info("%s cpuset=", current->comm);
cgroup: remove cgroup->name cgroup->name handling became quite complicated over time involving dedicated struct cgroup_name for RCU protection. Now that cgroup is on kernfs, we can drop all of it and simply use kernfs_name/path() and friends. Replace cgroup->name and all related code with kernfs name/path constructs. * Reimplement cgroup_name() and cgroup_path() as thin wrappers on top of kernfs counterparts, which involves semantic changes. pr_cont_cgroup_name() and pr_cont_cgroup_path() added. * cgroup->name handling dropped from cgroup_rename(). * All users of cgroup_name/path() updated to the new semantics. Users which were formatting the string just to printk them are converted to use pr_cont_cgroup_name/path() instead, which simplifies things quite a bit. As cgroup_name() no longer requires RCU read lock around it, RCU lockings which were protecting only cgroup_name() are removed. v2: Comment above oom_info_lock updated as suggested by Michal. v3: dummy_top doesn't have a kn associated and pr_cont_cgroup_name/path() ended up calling the matching kernfs functions with NULL kn leading to oops. Test for NULL kn and print "/" if so. This issue was reported by Fengguang Wu. v4: Rebased on top of 0ab02ca8f887 ("cgroup: protect modifications to cgroup_idr with cgroup_mutex"). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
2014-02-12 21:29:50 +07:00
pr_cont_cgroup_name(cgrp);
pr_cont(" mems_allowed=%*pbl\n",
nodemask_pr_args(&current->mems_allowed));
rcu_read_unlock();
}
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
/*
* Collection of memory_pressure is suppressed unless
* this flag is enabled by writing "1" to the special
* cpuset file 'memory_pressure_enabled' in the root cpuset.
*/
int cpuset_memory_pressure_enabled __read_mostly;
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
/**
* cpuset_memory_pressure_bump - keep stats of per-cpuset reclaims.
*
* Keep a running average of the rate of synchronous (direct)
* page reclaim efforts initiated by tasks in each cpuset.
*
* This represents the rate at which some task in the cpuset
* ran low on memory on all nodes it was allowed to use, and
* had to enter the kernels page reclaim code in an effort to
* create more free memory by tossing clean pages or swapping
* or writing dirty pages.
*
* Display to user space in the per-cpuset read-only file
* "memory_pressure". Value displayed is an integer
* representing the recent rate of entry into the synchronous
* (direct) page reclaim by any task attached to the cpuset.
**/
void __cpuset_memory_pressure_bump(void)
{
rcu_read_lock();
fmeter_markevent(&task_cs(current)->fmeter);
rcu_read_unlock();
[PATCH] cpuset: memory pressure meter Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:01:49 +07:00
}
#ifdef CONFIG_PROC_PID_CPUSET
/*
* proc_cpuset_show()
* - Print tasks cpuset path into seq_file.
* - Used for /proc/<pid>/cpuset.
[PATCH] cpusets: dual semaphore locking overhaul Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 06:02:30 +07:00
* - No need to task_lock(tsk) on this tsk->cpuset reference, as it
* doesn't really matter if tsk->cpuset changes after we read it,
* and we take cpuset_mutex, keeping cpuset_attach() from changing it
* anyway.
*/
int proc_cpuset_show(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *tsk)
{
char *buf;
struct cgroup_subsys_state *css;
int retval;
retval = -ENOMEM;
cgroup: remove cgroup->name cgroup->name handling became quite complicated over time involving dedicated struct cgroup_name for RCU protection. Now that cgroup is on kernfs, we can drop all of it and simply use kernfs_name/path() and friends. Replace cgroup->name and all related code with kernfs name/path constructs. * Reimplement cgroup_name() and cgroup_path() as thin wrappers on top of kernfs counterparts, which involves semantic changes. pr_cont_cgroup_name() and pr_cont_cgroup_path() added. * cgroup->name handling dropped from cgroup_rename(). * All users of cgroup_name/path() updated to the new semantics. Users which were formatting the string just to printk them are converted to use pr_cont_cgroup_name/path() instead, which simplifies things quite a bit. As cgroup_name() no longer requires RCU read lock around it, RCU lockings which were protecting only cgroup_name() are removed. v2: Comment above oom_info_lock updated as suggested by Michal. v3: dummy_top doesn't have a kn associated and pr_cont_cgroup_name/path() ended up calling the matching kernfs functions with NULL kn leading to oops. Test for NULL kn and print "/" if so. This issue was reported by Fengguang Wu. v4: Rebased on top of 0ab02ca8f887 ("cgroup: protect modifications to cgroup_idr with cgroup_mutex"). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
2014-02-12 21:29:50 +07:00
buf = kmalloc(PATH_MAX, GFP_KERNEL);
if (!buf)
goto out;
css = task_get_css(tsk, cpuset_cgrp_id);
retval = cgroup_path_ns(css->cgroup, buf, PATH_MAX,
current->nsproxy->cgroup_ns);
css_put(css);
if (retval >= PATH_MAX)
retval = -ENAMETOOLONG;
if (retval < 0)
goto out_free;
seq_puts(m, buf);
seq_putc(m, '\n');
cgroup: remove cgroup->name cgroup->name handling became quite complicated over time involving dedicated struct cgroup_name for RCU protection. Now that cgroup is on kernfs, we can drop all of it and simply use kernfs_name/path() and friends. Replace cgroup->name and all related code with kernfs name/path constructs. * Reimplement cgroup_name() and cgroup_path() as thin wrappers on top of kernfs counterparts, which involves semantic changes. pr_cont_cgroup_name() and pr_cont_cgroup_path() added. * cgroup->name handling dropped from cgroup_rename(). * All users of cgroup_name/path() updated to the new semantics. Users which were formatting the string just to printk them are converted to use pr_cont_cgroup_name/path() instead, which simplifies things quite a bit. As cgroup_name() no longer requires RCU read lock around it, RCU lockings which were protecting only cgroup_name() are removed. v2: Comment above oom_info_lock updated as suggested by Michal. v3: dummy_top doesn't have a kn associated and pr_cont_cgroup_name/path() ended up calling the matching kernfs functions with NULL kn leading to oops. Test for NULL kn and print "/" if so. This issue was reported by Fengguang Wu. v4: Rebased on top of 0ab02ca8f887 ("cgroup: protect modifications to cgroup_idr with cgroup_mutex"). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
2014-02-12 21:29:50 +07:00
retval = 0;
out_free:
kfree(buf);
out:
return retval;
}
#endif /* CONFIG_PROC_PID_CPUSET */
/* Display task mems_allowed in /proc/<pid>/status file. */
void cpuset_task_status_allowed(struct seq_file *m, struct task_struct *task)
{
seq_printf(m, "Mems_allowed:\t%*pb\n",
nodemask_pr_args(&task->mems_allowed));
seq_printf(m, "Mems_allowed_list:\t%*pbl\n",
nodemask_pr_args(&task->mems_allowed));
}